android_kernel_samsung_sm8650_ksu/include/linux/mfd/gsc.h

/* SPDX-License-Identifier: GPL-2.0
 *
 * Copyright (C) 2020 Gateworks Corporation
 */
#ifndef __LINUX_MFD_GSC_H_
#define __LINUX_MFD_GSC_H_

#include <linux/regmap.h>

/* Device Addresses */
#define GSC_MISC	0x20
#define GSC_UPDATE	0x21
#define GSC_GPIO	0x23
#define GSC_HWMON	0x29
#define GSC_EEPROM0	0x50
#define GSC_EEPROM1	0x51
#define GSC_EEPROM2	0x52
#define GSC_EEPROM3	0x53
#define GSC_RTC		0x68

/* Register offsets */
enum {
	GSC_CTRL_0	= 0x00,
	GSC_CTRL_1	= 0x01,
	GSC_TIME	= 0x02,
	GSC_TIME_ADD	= 0x06,
	GSC_IRQ_STATUS	= 0x0A,
	GSC_IRQ_ENABLE	= 0x0B,
	GSC_FW_CRC	= 0x0C,
	GSC_FW_VER	= 0x0E,
	GSC_WP		= 0x0F,
};

/* Bit definitions */
#define GSC_CTRL_0_PB_HARD_RESET	0
#define GSC_CTRL_0_PB_CLEAR_SECURE_KEY	1
#define GSC_CTRL_0_PB_SOFT_POWER_DOWN	2
#define GSC_CTRL_0_PB_BOOT_ALTERNATE	3
#define GSC_CTRL_0_PERFORM_CRC		4
#define GSC_CTRL_0_TAMPER_DETECT	5
#define GSC_CTRL_0_SWITCH_HOLD		6

#define GSC_CTRL_1_SLEEP_ENABLE		0
#define GSC_CTRL_1_SLEEP_ACTIVATE	1
#define GSC_CTRL_1_SLEEP_ADD		2
#define GSC_CTRL_1_SLEEP_NOWAKEPB	3
#define GSC_CTRL_1_WDT_TIME		4
#define GSC_CTRL_1_WDT_ENABLE		5
#define GSC_CTRL_1_SWITCH_BOOT_ENABLE	6
#define GSC_CTRL_1_SWITCH_BOOT_CLEAR	7

#define GSC_IRQ_PB			0
#define GSC_IRQ_KEY_ERASED		1
#define GSC_IRQ_EEPROM_WP		2
#define GSC_IRQ_RESV			3
#define GSC_IRQ_GPIO			4
#define GSC_IRQ_TAMPER			5
#define GSC_IRQ_WDT_TIMEOUT		6
#define GSC_IRQ_SWITCH_HOLD		7

int gsc_read(void *context, unsigned int reg, unsigned int *val);
int gsc_write(void *context, unsigned int reg, unsigned int val);

struct gsc_dev {
	struct device *dev;

	struct i2c_client *i2c;		/* 0x20: interrupt controller, WDT */
	struct i2c_client *i2c_hwmon;	/* 0x29: hwmon, fan controller */

	struct regmap *regmap;

	unsigned int fwver;
	unsigned short fwcrc;
};

#endif /* __LINUX_MFD_GSC_H_ */