Kconfig 73 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963196419651966196719681969197019711972197319741975197619771978197919801981198219831984198519861987198819891990199119921993199419951996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050205120522053205420552056205720582059206020612062206320642065206620672068206920702071207220732074207520762077207820792080208120822083208420852086208720882089209020912092209320942095209620972098209921002101210221032104210521062107210821092110211121122113211421152116211721182119212021212122212321242125212621272128212921302131213221332134213521362137213821392140214121422143214421452146214721482149215021512152215321542155215621572158215921602161216221632164216521662167216821692170217121722173217421752176217721782179218021812182218321842185218621872188218921902191219221932194219521962197219821992200220122022203220422052206220722082209221022112212221322142215221622172218221922202221222222232224222522262227222822292230223122322233223422352236223722382239224022412242224322442245224622472248224922502251225222532254225522562257225822592260226122622263226422652266226722682269227022712272227322742275227622772278227922802281228222832284228522862287228822892290229122922293229422952296229722982299230023012302230323042305230623072308230923102311231223132314231523162317231823192320232123222323232423252326232723282329233023312332233323342335233623372338233923402341234223432344234523462347234823492350235123522353235423552356235723582359236023612362236323642365236623672368236923702371237223732374237523762377237823792380238123822383238423852386238723882389239023912392239323942395239623972398
  1. # SPDX-License-Identifier: GPL-2.0-only
  2. #
  3. # Hardware monitoring chip drivers configuration
  4. #
  5. menuconfig HWMON
  6. tristate "Hardware Monitoring support"
  7. depends on HAS_IOMEM
  8. default y
  9. help
  10. Hardware monitoring devices let you monitor the hardware health
  11. of a system. Most modern motherboards include such a device. It
  12. can include temperature sensors, voltage sensors, fan speed
  13. sensors and various additional features such as the ability to
  14. control the speed of the fans. If you want this support you
  15. should say Y here and also to the specific driver(s) for your
  16. sensors chip(s) below.
  17. To find out which specific driver(s) you need, use the
  18. sensors-detect script from the lm_sensors package. Read
  19. <file:Documentation/hwmon/userspace-tools.rst> for details.
  20. This support can also be built as a module. If so, the module
  21. will be called hwmon.
  22. if HWMON
  23. config HWMON_VID
  24. tristate
  25. config HWMON_DEBUG_CHIP
  26. bool "Hardware Monitoring Chip debugging messages"
  27. help
  28. Say Y here if you want the I2C chip drivers to produce a bunch of
  29. debug messages to the system log. Select this if you are having
  30. a problem with I2C support and want to see more of what is going
  31. on.
  32. comment "Native drivers"
  33. config SENSORS_ABITUGURU
  34. tristate "Abit uGuru (rev 1 & 2)"
  35. depends on X86 && DMI
  36. help
  37. If you say yes here you get support for the sensor part of the first
  38. and second revision of the Abit uGuru chip. The voltage and frequency
  39. control parts of the Abit uGuru are not supported. The Abit uGuru
  40. chip can be found on Abit uGuru featuring motherboards (most modern
  41. Abit motherboards from before end 2005). For more info and a list
  42. of which motherboards have which revision see
  43. Documentation/hwmon/abituguru.rst
  44. This driver can also be built as a module. If so, the module
  45. will be called abituguru.
  46. config SENSORS_ABITUGURU3
  47. tristate "Abit uGuru (rev 3)"
  48. depends on X86 && DMI
  49. help
  50. If you say yes here you get support for the sensor part of the
  51. third revision of the Abit uGuru chip. Only reading the sensors
  52. and their settings is supported. The third revision of the Abit
  53. uGuru chip can be found on recent Abit motherboards (since end
  54. 2005). For more info and a list of which motherboards have which
  55. revision see Documentation/hwmon/abituguru3.rst
  56. This driver can also be built as a module. If so, the module
  57. will be called abituguru3.
  58. config SENSORS_AD7314
  59. tristate "Analog Devices AD7314 and compatibles"
  60. depends on SPI
  61. help
  62. If you say yes here you get support for the Analog Devices
  63. AD7314, ADT7301 and ADT7302 temperature sensors.
  64. This driver can also be built as a module. If so, the module
  65. will be called ad7314.
  66. config SENSORS_AD7414
  67. tristate "Analog Devices AD7414"
  68. depends on I2C
  69. help
  70. If you say yes here you get support for the Analog Devices
  71. AD7414 temperature monitoring chip.
  72. This driver can also be built as a module. If so, the module
  73. will be called ad7414.
  74. config SENSORS_AD7418
  75. tristate "Analog Devices AD7416, AD7417 and AD7418"
  76. depends on I2C
  77. help
  78. If you say yes here you get support for the Analog Devices
  79. AD7416, AD7417 and AD7418 temperature monitoring chips.
  80. This driver can also be built as a module. If so, the module
  81. will be called ad7418.
  82. config SENSORS_ADM1021
  83. tristate "Analog Devices ADM1021 and compatibles"
  84. depends on I2C
  85. depends on SENSORS_LM90=n
  86. help
  87. If you say yes here you get support for Analog Devices ADM1021
  88. and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  89. Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
  90. This driver can also be built as a module. If so, the module
  91. will be called adm1021.
  92. config SENSORS_ADM1025
  93. tristate "Analog Devices ADM1025 and compatibles"
  94. depends on I2C
  95. select HWMON_VID
  96. help
  97. If you say yes here you get support for Analog Devices ADM1025
  98. and Philips NE1619 sensor chips.
  99. This driver can also be built as a module. If so, the module
  100. will be called adm1025.
  101. config SENSORS_ADM1026
  102. tristate "Analog Devices ADM1026 and compatibles"
  103. depends on I2C
  104. select HWMON_VID
  105. help
  106. If you say yes here you get support for Analog Devices ADM1026
  107. sensor chip.
  108. This driver can also be built as a module. If so, the module
  109. will be called adm1026.
  110. config SENSORS_ADM1029
  111. tristate "Analog Devices ADM1029"
  112. depends on I2C
  113. help
  114. If you say yes here you get support for Analog Devices ADM1029
  115. sensor chip.
  116. Very rare chip, please let us know you use it.
  117. This driver can also be built as a module. If so, the module
  118. will be called adm1029.
  119. config SENSORS_ADM1031
  120. tristate "Analog Devices ADM1031 and compatibles"
  121. depends on I2C
  122. help
  123. If you say yes here you get support for Analog Devices ADM1031
  124. and ADM1030 sensor chips.
  125. This driver can also be built as a module. If so, the module
  126. will be called adm1031.
  127. config SENSORS_ADM1177
  128. tristate "Analog Devices ADM1177 and compatibles"
  129. depends on I2C
  130. help
  131. If you say yes here you get support for Analog Devices ADM1177
  132. sensor chips.
  133. This driver can also be built as a module. If so, the module
  134. will be called adm1177.
  135. config SENSORS_ADM9240
  136. tristate "Analog Devices ADM9240 and compatibles"
  137. depends on I2C
  138. select HWMON_VID
  139. help
  140. If you say yes here you get support for Analog Devices ADM9240,
  141. Dallas DS1780, National Semiconductor LM81 sensor chips.
  142. This driver can also be built as a module. If so, the module
  143. will be called adm9240.
  144. config SENSORS_ADT7X10
  145. tristate
  146. select REGMAP
  147. help
  148. This module contains common code shared by the ADT7310/ADT7320 and
  149. ADT7410/ADT7420 temperature monitoring chip drivers.
  150. If built as a module, the module will be called adt7x10.
  151. config SENSORS_ADT7310
  152. tristate "Analog Devices ADT7310/ADT7320"
  153. depends on SPI_MASTER
  154. select SENSORS_ADT7X10
  155. help
  156. If you say yes here you get support for the Analog Devices
  157. ADT7310 and ADT7320 temperature monitoring chips.
  158. This driver can also be built as a module. If so, the module
  159. will be called adt7310.
  160. config SENSORS_ADT7410
  161. tristate "Analog Devices ADT7410/ADT7420"
  162. depends on I2C
  163. select SENSORS_ADT7X10
  164. help
  165. If you say yes here you get support for the Analog Devices
  166. ADT7410 and ADT7420 temperature monitoring chips.
  167. This driver can also be built as a module. If so, the module
  168. will be called adt7410.
  169. config SENSORS_ADT7411
  170. tristate "Analog Devices ADT7411"
  171. depends on I2C
  172. help
  173. If you say yes here you get support for the Analog Devices
  174. ADT7411 voltage and temperature monitoring chip.
  175. This driver can also be built as a module. If so, the module
  176. will be called adt7411.
  177. config SENSORS_ADT7462
  178. tristate "Analog Devices ADT7462"
  179. depends on I2C
  180. help
  181. If you say yes here you get support for the Analog Devices
  182. ADT7462 temperature monitoring chips.
  183. This driver can also be built as a module. If so, the module
  184. will be called adt7462.
  185. config SENSORS_ADT7470
  186. tristate "Analog Devices ADT7470"
  187. depends on I2C
  188. help
  189. If you say yes here you get support for the Analog Devices
  190. ADT7470 temperature monitoring chips.
  191. This driver can also be built as a module. If so, the module
  192. will be called adt7470.
  193. config SENSORS_ADT7475
  194. tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
  195. depends on I2C
  196. select HWMON_VID
  197. help
  198. If you say yes here you get support for the Analog Devices
  199. ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
  200. chips.
  201. This driver can also be built as a module. If so, the module
  202. will be called adt7475.
  203. config SENSORS_AHT10
  204. tristate "Aosong AHT10"
  205. depends on I2C
  206. help
  207. If you say yes here, you get support for the Aosong AHT10
  208. temperature and humidity sensors
  209. This driver can also be built as a module. If so, the module
  210. will be called aht10.
  211. config SENSORS_AQUACOMPUTER_D5NEXT
  212. tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next"
  213. depends on USB_HID
  214. select CRC16
  215. help
  216. If you say yes here you get support for sensors and fans of
  217. the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan
  218. controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow
  219. Next sensor, where available.
  220. This driver can also be built as a module. If so, the module
  221. will be called aquacomputer_d5next.
  222. config SENSORS_AS370
  223. tristate "Synaptics AS370 SoC hardware monitoring driver"
  224. help
  225. If you say yes here you get support for the PVT sensors of
  226. the Synaptics AS370 SoC
  227. This driver can also be built as a module. If so, the module
  228. will be called as370-hwmon.
  229. config SENSORS_ASC7621
  230. tristate "Andigilog aSC7621"
  231. depends on I2C
  232. help
  233. If you say yes here you get support for the aSC7621
  234. family of SMBus sensors chip found on most Intel X38, X48, X58,
  235. 945, 965 and 975 desktop boards. Currently supported chips:
  236. aSC7621
  237. aSC7621a
  238. This driver can also be built as a module. If so, the module
  239. will be called asc7621.
  240. config SENSORS_AXI_FAN_CONTROL
  241. tristate "Analog Devices FAN Control HDL Core driver"
  242. help
  243. If you say yes here you get support for the Analog Devices
  244. AXI HDL FAN monitoring core.
  245. This driver can also be built as a module. If so, the module
  246. will be called axi-fan-control
  247. config SENSORS_K8TEMP
  248. tristate "AMD Athlon64/FX or Opteron temperature sensor"
  249. depends on X86 && PCI
  250. help
  251. If you say yes here you get support for the temperature
  252. sensor(s) inside your CPU. Supported is whole AMD K8
  253. microarchitecture. Please note that you will need at least
  254. lm-sensors 2.10.1 for proper userspace support.
  255. This driver can also be built as a module. If so, the module
  256. will be called k8temp.
  257. config SENSORS_K10TEMP
  258. tristate "AMD Family 10h+ temperature sensor"
  259. depends on X86 && PCI && AMD_NB
  260. help
  261. If you say yes here you get support for the temperature
  262. sensor(s) inside your CPU. Supported are later revisions of
  263. the AMD Family 10h and all revisions of the AMD Family 11h,
  264. 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)
  265. and 16h (Kabini/Mullins) microarchitectures.
  266. This driver can also be built as a module. If so, the module
  267. will be called k10temp.
  268. config SENSORS_FAM15H_POWER
  269. tristate "AMD Family 15h processor power"
  270. depends on X86 && PCI && CPU_SUP_AMD
  271. help
  272. If you say yes here you get support for processor power
  273. information of your AMD family 15h CPU.
  274. This driver can also be built as a module. If so, the module
  275. will be called fam15h_power.
  276. config SENSORS_APPLESMC
  277. tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
  278. depends on INPUT && X86
  279. select NEW_LEDS
  280. select LEDS_CLASS
  281. help
  282. This driver provides support for the Apple System Management
  283. Controller, which provides an accelerometer (Apple Sudden Motion
  284. Sensor), light sensors, temperature sensors, keyboard backlight
  285. control and fan control.
  286. Only Intel-based Apple's computers are supported (MacBook Pro,
  287. MacBook, MacMini).
  288. Data from the different sensors, keyboard backlight control and fan
  289. control are accessible via sysfs.
  290. This driver also provides an absolute input class device, allowing
  291. the laptop to act as a pinball machine-esque joystick.
  292. Say Y here if you have an applicable laptop and want to experience
  293. the awesome power of applesmc.
  294. config SENSORS_ARM_SCMI
  295. tristate "ARM SCMI Sensors"
  296. depends on ARM_SCMI_PROTOCOL
  297. depends on THERMAL || !THERMAL_OF
  298. help
  299. This driver provides support for temperature, voltage, current
  300. and power sensors available on SCMI based platforms. The actual
  301. number and type of sensors exported depend on the platform.
  302. This driver can also be built as a module. If so, the module
  303. will be called scmi-hwmon.
  304. config SENSORS_ARM_SCPI
  305. tristate "ARM SCPI Sensors"
  306. depends on ARM_SCPI_PROTOCOL
  307. depends on THERMAL || !THERMAL_OF
  308. help
  309. This driver provides support for temperature, voltage, current
  310. and power sensors available on ARM Ltd's SCP based platforms. The
  311. actual number and type of sensors exported depend on the platform.
  312. config SENSORS_ASB100
  313. tristate "Asus ASB100 Bach"
  314. depends on (X86 || COMPILE_TEST) && I2C
  315. select HWMON_VID
  316. help
  317. If you say yes here you get support for the ASB100 Bach sensor
  318. chip found on some Asus mainboards.
  319. This driver can also be built as a module. If so, the module
  320. will be called asb100.
  321. config SENSORS_ASPEED
  322. tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"
  323. depends on ARCH_ASPEED || COMPILE_TEST
  324. depends on THERMAL || THERMAL=n
  325. select REGMAP
  326. help
  327. This driver provides support for ASPEED AST2400/AST2500 PWM
  328. and Fan Tacho controllers.
  329. This driver can also be built as a module. If so, the module
  330. will be called aspeed_pwm_tacho.
  331. config SENSORS_ATXP1
  332. tristate "Attansic ATXP1 VID controller"
  333. depends on I2C
  334. select HWMON_VID
  335. help
  336. If you say yes here you get support for the Attansic ATXP1 VID
  337. controller.
  338. If your board have such a chip, you are able to control your CPU
  339. core and other voltages.
  340. This driver can also be built as a module. If so, the module
  341. will be called atxp1.
  342. config SENSORS_BT1_PVT
  343. tristate "Baikal-T1 Process, Voltage, Temperature sensor driver"
  344. depends on MIPS_BAIKAL_T1 || COMPILE_TEST
  345. select POLYNOMIAL
  346. help
  347. If you say yes here you get support for Baikal-T1 PVT sensor
  348. embedded into the SoC.
  349. This driver can also be built as a module. If so, the module will be
  350. called bt1-pvt.
  351. config SENSORS_BT1_PVT_ALARMS
  352. bool "Enable Baikal-T1 PVT sensor alarms"
  353. depends on SENSORS_BT1_PVT
  354. help
  355. Baikal-T1 PVT IP-block provides threshold registers for each
  356. supported sensor. But the corresponding interrupts might be
  357. generated by the thresholds comparator only in synchronization with
  358. a data conversion. Additionally there is only one sensor data can
  359. be converted at a time. All of these makes the interface impossible
  360. to be used for the hwmon alarms implementation without periodic
  361. switch between the PVT sensors. By default the data conversion is
  362. performed on demand from the user-space. If this config is enabled
  363. the data conversion will be periodically performed and the data will be
  364. saved in the internal driver cache.
  365. config SENSORS_CORSAIR_CPRO
  366. tristate "Corsair Commander Pro controller"
  367. depends on HID
  368. help
  369. If you say yes here you get support for the Corsair Commander Pro
  370. controller.
  371. This driver can also be built as a module. If so, the module
  372. will be called corsair-cpro.
  373. config SENSORS_CORSAIR_PSU
  374. tristate "Corsair PSU HID controller"
  375. depends on HID
  376. help
  377. If you say yes here you get support for Corsair PSUs with a HID
  378. interface.
  379. Currently this driver supports the (RM/HX)550i, (RM/HX)650i,
  380. (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies
  381. by Corsair.
  382. This driver can also be built as a module. If so, the module
  383. will be called corsair-psu.
  384. config SENSORS_DRIVETEMP
  385. tristate "Hard disk drives with temperature sensors"
  386. depends on SCSI && ATA
  387. help
  388. If you say yes you get support for the temperature sensor on
  389. hard disk drives.
  390. This driver can also be built as a module. If so, the module
  391. will be called drivetemp.
  392. config SENSORS_DS620
  393. tristate "Dallas Semiconductor DS620"
  394. depends on I2C
  395. help
  396. If you say yes here you get support for Dallas Semiconductor
  397. DS620 sensor chip.
  398. This driver can also be built as a module. If so, the module
  399. will be called ds620.
  400. config SENSORS_DS1621
  401. tristate "Dallas Semiconductor DS1621 and compatibles"
  402. depends on I2C
  403. help
  404. If you say yes here you get support for Dallas Semiconductor/Maxim
  405. Integrated DS1621 sensor chips and compatible models including:
  406. - Dallas Semiconductor DS1625
  407. - Maxim Integrated DS1631
  408. - Maxim Integrated DS1721
  409. - Maxim Integrated DS1731
  410. This driver can also be built as a module. If so, the module
  411. will be called ds1621.
  412. config SENSORS_DELL_SMM
  413. tristate "Dell laptop SMM BIOS hwmon driver"
  414. depends on X86
  415. imply THERMAL
  416. help
  417. This hwmon driver adds support for reporting temperature of different
  418. sensors and controls the fans on Dell laptops via System Management
  419. Mode provided by Dell BIOS.
  420. When option I8K is also enabled this driver provides legacy /proc/i8k
  421. userspace interface for i8kutils package.
  422. config I8K
  423. bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver"
  424. depends on SENSORS_DELL_SMM
  425. depends on PROC_FS
  426. help
  427. This option enables the legacy /proc/i8k userspace interface of the
  428. dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS
  429. version, temperatures and allows control of fan speeds of some Dell
  430. laptops. Sometimes it also reports power and hotkey status.
  431. This interface is required to run programs from the i8kutils package.
  432. Say Y if you intend to run userspace programs that use this interface.
  433. Say N otherwise.
  434. config SENSORS_DA9052_ADC
  435. tristate "Dialog DA9052/DA9053 ADC"
  436. depends on PMIC_DA9052
  437. help
  438. Say y here to support the ADC found on Dialog Semiconductor
  439. DA9052-BC and DA9053-AA/Bx PMICs.
  440. This driver can also be built as module. If so, the module
  441. will be called da9052-hwmon.
  442. config SENSORS_DA9055
  443. tristate "Dialog Semiconductor DA9055 ADC"
  444. depends on MFD_DA9055
  445. help
  446. If you say yes here you get support for ADC on the Dialog
  447. Semiconductor DA9055 PMIC.
  448. This driver can also be built as a module. If so, the module
  449. will be called da9055-hwmon.
  450. config SENSORS_I5K_AMB
  451. tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
  452. depends on PCI
  453. help
  454. If you say yes here you get support for FB-DIMM AMB temperature
  455. monitoring chips on systems with the Intel 5000 series chipset.
  456. This driver can also be built as a module. If so, the module
  457. will be called i5k_amb.
  458. config SENSORS_SPARX5
  459. tristate "Sparx5 SoC temperature sensor"
  460. depends on ARCH_SPARX5 || COMPILE_TEST
  461. help
  462. If you say yes here you get support for temperature monitoring
  463. with the Microchip Sparx5 SoC.
  464. This driver can also be built as a module. If so, the module
  465. will be called sparx5-temp.
  466. config SENSORS_F71805F
  467. tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
  468. depends on !PPC
  469. help
  470. If you say yes here you get support for hardware monitoring
  471. features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
  472. Super-I/O chips.
  473. This driver can also be built as a module. If so, the module
  474. will be called f71805f.
  475. config SENSORS_F71882FG
  476. tristate "Fintek F71882FG and compatibles"
  477. depends on !PPC
  478. help
  479. If you say yes here you get support for hardware monitoring
  480. features of many Fintek Super-I/O (LPC) chips. The currently
  481. supported chips are:
  482. F71808E/A
  483. F71858FG
  484. F71862FG
  485. F71863FG
  486. F71869F/E/A
  487. F71882FG
  488. F71883FG
  489. F71889FG/ED/A
  490. F8000
  491. F81801U
  492. F81865F
  493. This driver can also be built as a module. If so, the module
  494. will be called f71882fg.
  495. config SENSORS_F75375S
  496. tristate "Fintek F75375S/SP, F75373 and F75387"
  497. depends on I2C
  498. help
  499. If you say yes here you get support for hardware monitoring
  500. features of the Fintek F75375S/SP, F75373 and F75387
  501. This driver can also be built as a module. If so, the module
  502. will be called f75375s.
  503. config SENSORS_GSC
  504. tristate "Gateworks System Controller ADC"
  505. depends on MFD_GATEWORKS_GSC
  506. help
  507. Support for the Gateworks System Controller A/D converters.
  508. To compile this driver as a module, choose M here:
  509. the module will be called gsc-hwmon.
  510. config SENSORS_MC13783_ADC
  511. tristate "Freescale MC13783/MC13892 ADC"
  512. depends on MFD_MC13XXX
  513. help
  514. Support for the A/D converter on MC13783 and MC13892 PMIC.
  515. config SENSORS_FSCHMD
  516. tristate "Fujitsu Siemens Computers sensor chips"
  517. depends on (X86 || COMPILE_TEST) && I2C
  518. help
  519. If you say yes here you get support for the following Fujitsu
  520. Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
  521. Heimdall, Heracles, Hades and Syleus including support for the
  522. integrated watchdog.
  523. This is a merged driver for FSC sensor chips replacing the fscpos,
  524. fscscy and fscher drivers and adding support for several other FSC
  525. sensor chips.
  526. This driver can also be built as a module. If so, the module
  527. will be called fschmd.
  528. config SENSORS_FTSTEUTATES
  529. tristate "Fujitsu Technology Solutions sensor chip Teutates"
  530. depends on I2C && WATCHDOG
  531. select WATCHDOG_CORE
  532. help
  533. If you say yes here you get support for the Fujitsu Technology
  534. Solutions (FTS) sensor chip "Teutates" including support for
  535. the integrated watchdog.
  536. This driver can also be built as a module. If so, the module
  537. will be called ftsteutates.
  538. config SENSORS_GL518SM
  539. tristate "Genesys Logic GL518SM"
  540. depends on I2C
  541. help
  542. If you say yes here you get support for Genesys Logic GL518SM
  543. sensor chips.
  544. This driver can also be built as a module. If so, the module
  545. will be called gl518sm.
  546. config SENSORS_GL520SM
  547. tristate "Genesys Logic GL520SM"
  548. depends on I2C
  549. select HWMON_VID
  550. help
  551. If you say yes here you get support for Genesys Logic GL520SM
  552. sensor chips.
  553. This driver can also be built as a module. If so, the module
  554. will be called gl520sm.
  555. config SENSORS_G760A
  556. tristate "GMT G760A"
  557. depends on I2C
  558. help
  559. If you say yes here you get support for Global Mixed-mode
  560. Technology Inc G760A fan speed PWM controller chips.
  561. This driver can also be built as a module. If so, the module
  562. will be called g760a.
  563. config SENSORS_G762
  564. tristate "GMT G762 and G763"
  565. depends on I2C
  566. help
  567. If you say yes here you get support for Global Mixed-mode
  568. Technology Inc G762 and G763 fan speed PWM controller chips.
  569. This driver can also be built as a module. If so, the module
  570. will be called g762.
  571. config SENSORS_GPIO_FAN
  572. tristate "GPIO fan"
  573. depends on OF_GPIO
  574. depends on GPIOLIB || COMPILE_TEST
  575. depends on THERMAL || THERMAL=n
  576. help
  577. If you say yes here you get support for fans connected to GPIO lines.
  578. This driver can also be built as a module. If so, the module
  579. will be called gpio-fan.
  580. config SENSORS_HIH6130
  581. tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
  582. depends on I2C
  583. help
  584. If you say yes here you get support for Honeywell Humidicon
  585. HIH-6130 and HIH-6131 Humidicon humidity sensors.
  586. This driver can also be built as a module. If so, the module
  587. will be called hih6130.
  588. config SENSORS_IBMAEM
  589. tristate "IBM Active Energy Manager temperature/power sensors and control"
  590. select IPMI_SI
  591. depends on IPMI_HANDLER
  592. help
  593. If you say yes here you get support for the temperature and
  594. power sensors and capping hardware in various IBM System X
  595. servers that support Active Energy Manager. This includes
  596. the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
  597. and certain HC10/HS2x/LS2x/QS2x blades.
  598. This driver can also be built as a module. If so, the module
  599. will be called ibmaem.
  600. config SENSORS_IBMPEX
  601. tristate "IBM PowerExecutive temperature/power sensors"
  602. select IPMI_SI
  603. depends on IPMI_HANDLER
  604. help
  605. If you say yes here you get support for the temperature and
  606. power sensors in various IBM System X servers that support
  607. PowerExecutive. So far this includes the x3350, x3550, x3650,
  608. x3655, and x3755; the x3800, x3850, and x3950 models that have
  609. PCI Express; and some of the HS2x, LS2x, and QS2x blades.
  610. This driver can also be built as a module. If so, the module
  611. will be called ibmpex.
  612. config SENSORS_IBMPOWERNV
  613. tristate "IBM POWERNV platform sensors"
  614. depends on PPC_POWERNV
  615. default y
  616. help
  617. If you say yes here you get support for the temperature/fan/power
  618. sensors on your PowerNV platform.
  619. This driver can also be built as a module. If so, the module
  620. will be called ibmpowernv.
  621. config SENSORS_IIO_HWMON
  622. tristate "Hwmon driver that uses channels specified via iio maps"
  623. depends on IIO
  624. help
  625. This is a platform driver that in combination with a suitable
  626. map allows IIO devices to provide basic hwmon functionality
  627. for those channels specified in the map. This map can be provided
  628. either via platform data or the device tree bindings.
  629. config SENSORS_I5500
  630. tristate "Intel 5500/5520/X58 temperature sensor"
  631. depends on X86 && PCI
  632. help
  633. If you say yes here you get support for the temperature
  634. sensor inside the Intel 5500, 5520 and X58 chipsets.
  635. This driver can also be built as a module. If so, the module
  636. will be called i5500_temp.
  637. config SENSORS_CORETEMP
  638. tristate "Intel Core/Core2/Atom temperature sensor"
  639. depends on X86
  640. help
  641. If you say yes here you get support for the temperature
  642. sensor inside your CPU. Most of the family 6 CPUs
  643. are supported. Check Documentation/hwmon/coretemp.rst for details.
  644. config SENSORS_IT87
  645. tristate "ITE IT87xx and compatibles"
  646. depends on !PPC
  647. select HWMON_VID
  648. help
  649. If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F,
  650. IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E,
  651. IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
  652. IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950
  653. clone.
  654. This driver can also be built as a module. If so, the module
  655. will be called it87.
  656. config SENSORS_JC42
  657. tristate "JEDEC JC42.4 compliant memory module temperature sensors"
  658. depends on I2C
  659. select REGMAP_I2C
  660. help
  661. If you say yes here, you get support for JEDEC JC42.4 compliant
  662. temperature sensors, which are used on many DDR3 memory modules for
  663. mobile devices and servers. Support will include, but not be limited
  664. to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
  665. MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,
  666. STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
  667. This driver can also be built as a module. If so, the module
  668. will be called jc42.
  669. config SENSORS_POWR1220
  670. tristate "Lattice POWR1220 Power Monitoring"
  671. depends on I2C
  672. help
  673. If you say yes here you get access to the hardware monitoring
  674. functions of the Lattice POWR1220 isp Power Supply Monitoring,
  675. Sequencing and Margining Controller.
  676. This driver can also be built as a module. If so, the module
  677. will be called powr1220.
  678. config SENSORS_LAN966X
  679. tristate "Microchip LAN966x Hardware Monitoring"
  680. depends on SOC_LAN966 || COMPILE_TEST
  681. select REGMAP
  682. select POLYNOMIAL
  683. help
  684. If you say yes here you get support for temperature monitoring
  685. on the Microchip LAN966x SoC.
  686. This driver can also be built as a module. If so, the module
  687. will be called lan966x-hwmon.
  688. config SENSORS_LINEAGE
  689. tristate "Lineage Compact Power Line Power Entry Module"
  690. depends on I2C
  691. help
  692. If you say yes here you get support for the Lineage Compact Power Line
  693. series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
  694. CP2000DC, CP2725, and others.
  695. This driver can also be built as a module. If so, the module
  696. will be called lineage-pem.
  697. config SENSORS_LOCHNAGAR
  698. tristate "Lochnagar Hardware Monitor"
  699. depends on MFD_LOCHNAGAR
  700. help
  701. If you say yes here you get support for Lochnagar 2 temperature,
  702. voltage and current sensors abilities.
  703. This driver can also be built as a module. If so, the module
  704. will be called lochnagar-hwmon.
  705. config SENSORS_LTC2945
  706. tristate "Linear Technology LTC2945"
  707. depends on I2C
  708. select REGMAP_I2C
  709. help
  710. If you say yes here you get support for Linear Technology LTC2945
  711. I2C System Monitor.
  712. This driver can also be built as a module. If so, the module will
  713. be called ltc2945.
  714. config SENSORS_LTC2947
  715. tristate
  716. config SENSORS_LTC2947_I2C
  717. tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C"
  718. depends on I2C
  719. select REGMAP_I2C
  720. select SENSORS_LTC2947
  721. help
  722. If you say yes here you get support for Linear Technology LTC2947
  723. I2C High Precision Power and Energy Monitor
  724. This driver can also be built as a module. If so, the module will
  725. be called ltc2947-i2c.
  726. config SENSORS_LTC2947_SPI
  727. tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI"
  728. depends on SPI_MASTER
  729. select REGMAP_SPI
  730. select SENSORS_LTC2947
  731. help
  732. If you say yes here you get support for Linear Technology LTC2947
  733. SPI High Precision Power and Energy Monitor
  734. This driver can also be built as a module. If so, the module will
  735. be called ltc2947-spi.
  736. config SENSORS_LTC2990
  737. tristate "Linear Technology LTC2990"
  738. depends on I2C
  739. help
  740. If you say yes here you get support for Linear Technology LTC2990
  741. I2C System Monitor. The LTC2990 supports a combination of voltage,
  742. current and temperature monitoring.
  743. This driver can also be built as a module. If so, the module will
  744. be called ltc2990.
  745. config SENSORS_LTC2992
  746. tristate "Linear Technology LTC2992"
  747. depends on I2C
  748. depends on GPIOLIB
  749. help
  750. If you say yes here you get support for Linear Technology LTC2992
  751. I2C System Monitor. The LTC2992 measures current, voltage, and
  752. power of two supplies.
  753. This driver can also be built as a module. If so, the module will
  754. be called ltc2992.
  755. config SENSORS_LTC4151
  756. tristate "Linear Technology LTC4151"
  757. depends on I2C
  758. help
  759. If you say yes here you get support for Linear Technology LTC4151
  760. High Voltage I2C Current and Voltage Monitor interface.
  761. This driver can also be built as a module. If so, the module will
  762. be called ltc4151.
  763. config SENSORS_LTC4215
  764. tristate "Linear Technology LTC4215"
  765. depends on I2C
  766. help
  767. If you say yes here you get support for Linear Technology LTC4215
  768. Hot Swap Controller I2C interface.
  769. This driver can also be built as a module. If so, the module will
  770. be called ltc4215.
  771. config SENSORS_LTC4222
  772. tristate "Linear Technology LTC4222"
  773. depends on I2C
  774. select REGMAP_I2C
  775. help
  776. If you say yes here you get support for Linear Technology LTC4222
  777. Dual Hot Swap Controller I2C interface.
  778. This driver can also be built as a module. If so, the module will
  779. be called ltc4222.
  780. config SENSORS_LTC4245
  781. tristate "Linear Technology LTC4245"
  782. depends on I2C
  783. help
  784. If you say yes here you get support for Linear Technology LTC4245
  785. Multiple Supply Hot Swap Controller I2C interface.
  786. This driver can also be built as a module. If so, the module will
  787. be called ltc4245.
  788. config SENSORS_LTC4260
  789. tristate "Linear Technology LTC4260"
  790. depends on I2C
  791. select REGMAP_I2C
  792. help
  793. If you say yes here you get support for Linear Technology LTC4260
  794. Positive Voltage Hot Swap Controller I2C interface.
  795. This driver can also be built as a module. If so, the module will
  796. be called ltc4260.
  797. config SENSORS_LTC4261
  798. tristate "Linear Technology LTC4261"
  799. depends on I2C
  800. help
  801. If you say yes here you get support for Linear Technology LTC4261
  802. Negative Voltage Hot Swap Controller I2C interface.
  803. This driver can also be built as a module. If so, the module will
  804. be called ltc4261.
  805. config SENSORS_LTQ_CPUTEMP
  806. bool "Lantiq cpu temperature sensor driver"
  807. depends on SOC_XWAY
  808. help
  809. If you say yes here you get support for the temperature
  810. sensor inside your CPU.
  811. config SENSORS_MAX1111
  812. tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
  813. depends on SPI_MASTER
  814. help
  815. Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
  816. ADC chips.
  817. This driver can also be built as a module. If so, the module
  818. will be called max1111.
  819. config SENSORS_MAX127
  820. tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System"
  821. depends on I2C
  822. help
  823. Say y here to support Maxim's MAX127 DAS chips.
  824. This driver can also be built as a module. If so, the module
  825. will be called max127.
  826. config SENSORS_MAX16065
  827. tristate "Maxim MAX16065 System Manager and compatibles"
  828. depends on I2C
  829. help
  830. If you say yes here you get support for hardware monitoring
  831. capabilities of the following Maxim System Manager chips.
  832. MAX16065
  833. MAX16066
  834. MAX16067
  835. MAX16068
  836. MAX16070
  837. MAX16071
  838. This driver can also be built as a module. If so, the module
  839. will be called max16065.
  840. config SENSORS_MAX1619
  841. tristate "Maxim MAX1619 sensor chip"
  842. depends on I2C
  843. help
  844. If you say yes here you get support for MAX1619 sensor chip.
  845. This driver can also be built as a module. If so, the module
  846. will be called max1619.
  847. config SENSORS_MAX1668
  848. tristate "Maxim MAX1668 and compatibles"
  849. depends on I2C
  850. help
  851. If you say yes here you get support for MAX1668, MAX1989 and
  852. MAX1805 chips.
  853. This driver can also be built as a module. If so, the module
  854. will be called max1668.
  855. config SENSORS_MAX197
  856. tristate "Maxim MAX197 and compatibles"
  857. help
  858. Support for the Maxim MAX197 A/D converter.
  859. Support will include, but not be limited to, MAX197, and MAX199.
  860. This driver can also be built as a module. If so, the module
  861. will be called max197.
  862. config SENSORS_MAX31722
  863. tristate "MAX31722 temperature sensor"
  864. depends on SPI
  865. help
  866. Support for the Maxim Integrated MAX31722/MAX31723 digital
  867. thermometers/thermostats operating over an SPI interface.
  868. This driver can also be built as a module. If so, the module
  869. will be called max31722.
  870. config SENSORS_MAX31730
  871. tristate "MAX31730 temperature sensor"
  872. depends on I2C
  873. help
  874. Support for the Maxim Integrated MAX31730 3-Channel Remote
  875. Temperature Sensor.
  876. This driver can also be built as a module. If so, the module
  877. will be called max31730.
  878. config SENSORS_MAX31760
  879. tristate "MAX31760 fan speed controller"
  880. depends on I2C
  881. select REGMAP_I2C
  882. help
  883. Support for the Analog Devices MAX31760 Precision Fan-Speed
  884. Controller. MAX31760 integrates temperature sensing along with
  885. precision PWM fan control.
  886. This driver can also be built as a module. If so, the module
  887. will be called max31760.
  888. config SENSORS_MAX6620
  889. tristate "Maxim MAX6620 fan controller"
  890. depends on I2C
  891. help
  892. If you say yes here you get support for the MAX6620
  893. fan controller.
  894. This driver can also be built as a module. If so, the module
  895. will be called max6620.
  896. config SENSORS_MAX6621
  897. tristate "Maxim MAX6621 sensor chip"
  898. depends on I2C
  899. select REGMAP_I2C
  900. help
  901. If you say yes here you get support for MAX6621 sensor chip.
  902. MAX6621 is a PECI-to-I2C translator provides an efficient,
  903. low-cost solution for PECI-to-SMBus/I2C protocol conversion.
  904. It allows reading the temperature from the PECI-compliant
  905. host directly from up to four PECI-enabled CPUs.
  906. This driver can also be built as a module. If so, the module
  907. will be called max6621.
  908. config SENSORS_MAX6639
  909. tristate "Maxim MAX6639 sensor chip"
  910. depends on I2C
  911. help
  912. If you say yes here you get support for the MAX6639
  913. sensor chips.
  914. This driver can also be built as a module. If so, the module
  915. will be called max6639.
  916. config SENSORS_MAX6642
  917. tristate "Maxim MAX6642 sensor chip"
  918. depends on I2C
  919. depends on SENSORS_LM90=n
  920. help
  921. If you say yes here you get support for MAX6642 sensor chip.
  922. MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
  923. with Overtemperature Alarm from Maxim.
  924. This driver can also be built as a module. If so, the module
  925. will be called max6642.
  926. config SENSORS_MAX6650
  927. tristate "Maxim MAX6650 sensor chip"
  928. depends on I2C
  929. depends on THERMAL || THERMAL=n
  930. help
  931. If you say yes here you get support for the MAX6650 / MAX6651
  932. sensor chips.
  933. This driver can also be built as a module. If so, the module
  934. will be called max6650.
  935. config SENSORS_MAX6697
  936. tristate "Maxim MAX6697 and compatibles"
  937. depends on I2C
  938. help
  939. If you say yes here you get support for MAX6581, MAX6602, MAX6622,
  940. MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
  941. temperature sensor chips.
  942. This driver can also be built as a module. If so, the module
  943. will be called max6697.
  944. config SENSORS_MAX31790
  945. tristate "Maxim MAX31790 sensor chip"
  946. depends on I2C
  947. help
  948. If you say yes here you get support for 6-Channel PWM-Output
  949. Fan RPM Controller.
  950. This driver can also be built as a module. If so, the module
  951. will be called max31790.
  952. config SENSORS_MCP3021
  953. tristate "Microchip MCP3021 and compatibles"
  954. depends on I2C
  955. help
  956. If you say yes here you get support for MCP3021 and MCP3221.
  957. The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
  958. with 12-bit resolution.
  959. This driver can also be built as a module. If so, the module
  960. will be called mcp3021.
  961. config SENSORS_MLXREG_FAN
  962. tristate "Mellanox FAN driver"
  963. depends on MELLANOX_PLATFORM
  964. imply THERMAL
  965. select REGMAP
  966. help
  967. This option enables support for the FAN control on the Mellanox
  968. Ethernet and InfiniBand switches. The driver can be activated by the
  969. platform device add call. Say Y to enable these. To compile this
  970. driver as a module, choose 'M' here: the module will be called
  971. mlxreg-fan.
  972. config SENSORS_TC654
  973. tristate "Microchip TC654/TC655 and compatibles"
  974. depends on I2C
  975. help
  976. If you say yes here you get support for TC654 and TC655.
  977. The TC654 and TC655 are PWM mode fan speed controllers with
  978. FanSense technology for use with brushless DC fans.
  979. This driver can also be built as a module. If so, the module
  980. will be called tc654.
  981. config SENSORS_TPS23861
  982. tristate "Texas Instruments TPS23861 PoE PSE"
  983. depends on I2C
  984. select REGMAP_I2C
  985. help
  986. If you say yes here you get support for Texas Instruments
  987. TPS23861 802.3at PoE PSE chips.
  988. This driver can also be built as a module. If so, the module
  989. will be called tps23861.
  990. config SENSORS_MENF21BMC_HWMON
  991. tristate "MEN 14F021P00 BMC Hardware Monitoring"
  992. depends on MFD_MENF21BMC
  993. help
  994. Say Y here to include support for the MEN 14F021P00 BMC
  995. hardware monitoring.
  996. This driver can also be built as a module. If so the module
  997. will be called menf21bmc_hwmon.
  998. config SENSORS_MR75203
  999. tristate "Moortec Semiconductor MR75203 PVT Controller"
  1000. select REGMAP_MMIO
  1001. help
  1002. If you say yes here you get support for Moortec MR75203
  1003. PVT controller.
  1004. This driver can also be built as a module. If so, the module
  1005. will be called mr75203.
  1006. config SENSORS_ADCXX
  1007. tristate "National Semiconductor ADCxxxSxxx"
  1008. depends on SPI_MASTER
  1009. help
  1010. If you say yes here you get support for the National Semiconductor
  1011. ADC<bb><c>S<sss> chip family, where
  1012. * bb is the resolution in number of bits (8, 10, 12)
  1013. * c is the number of channels (1, 2, 4, 8)
  1014. * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
  1015. kSPS and 101 for 1 MSPS)
  1016. Examples : ADC081S101, ADC124S501, ...
  1017. This driver can also be built as a module. If so, the module
  1018. will be called adcxx.
  1019. config SENSORS_LM63
  1020. tristate "National Semiconductor LM63 and compatibles"
  1021. depends on I2C
  1022. help
  1023. If you say yes here you get support for the National
  1024. Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
  1025. sensors with integrated fan control. Such chips are found
  1026. on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
  1027. others.
  1028. This driver can also be built as a module. If so, the module
  1029. will be called lm63.
  1030. config SENSORS_LM70
  1031. tristate "National Semiconductor LM70 and compatibles"
  1032. depends on SPI_MASTER
  1033. help
  1034. If you say yes here you get support for the National Semiconductor
  1035. LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124,
  1036. TMP125 digital temperature sensor chips.
  1037. This driver can also be built as a module. If so, the module
  1038. will be called lm70.
  1039. config SENSORS_LM73
  1040. tristate "National Semiconductor LM73"
  1041. depends on I2C
  1042. help
  1043. If you say yes here you get support for National Semiconductor LM73
  1044. sensor chips.
  1045. This driver can also be built as a module. If so, the module
  1046. will be called lm73.
  1047. config SENSORS_LM75
  1048. tristate "National Semiconductor LM75 and compatibles"
  1049. depends on I2C
  1050. select REGMAP_I2C
  1051. help
  1052. If you say yes here you get support for one common type of
  1053. temperature sensor chip, with models including:
  1054. - Analog Devices ADT75
  1055. - Atmel (now Microchip) AT30TS74
  1056. - Dallas Semiconductor DS75, DS1775 and DS7505
  1057. - Global Mixed-mode Technology (GMT) G751
  1058. - Maxim MAX6625 and MAX6626
  1059. - Microchip MCP980x
  1060. - National Semiconductor LM75, LM75A
  1061. - NXP's LM75A
  1062. - ST Microelectronics STDS75
  1063. - ST Microelectronics STLM75
  1064. - TelCom (now Microchip) TCN75
  1065. - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75,
  1066. TMP175, TMP275
  1067. This driver supports driver model based binding through board
  1068. specific I2C device tables.
  1069. It also supports the "legacy" style of driver binding. To use
  1070. that with some chips which don't replicate LM75 quirks exactly,
  1071. you may need the "force" module parameter.
  1072. This driver can also be built as a module. If so, the module
  1073. will be called lm75.
  1074. config SENSORS_LM77
  1075. tristate "National Semiconductor LM77"
  1076. depends on I2C
  1077. help
  1078. If you say yes here you get support for National Semiconductor LM77
  1079. sensor chips.
  1080. This driver can also be built as a module. If so, the module
  1081. will be called lm77.
  1082. config SENSORS_LM78
  1083. tristate "National Semiconductor LM78 and compatibles"
  1084. depends on I2C
  1085. select HWMON_VID
  1086. help
  1087. If you say yes here you get support for National Semiconductor LM78,
  1088. LM78-J and LM79.
  1089. This driver can also be built as a module. If so, the module
  1090. will be called lm78.
  1091. config SENSORS_LM80
  1092. tristate "National Semiconductor LM80 and LM96080"
  1093. depends on I2C
  1094. help
  1095. If you say yes here you get support for National Semiconductor
  1096. LM80 and LM96080 sensor chips.
  1097. This driver can also be built as a module. If so, the module
  1098. will be called lm80.
  1099. config SENSORS_LM83
  1100. tristate "National Semiconductor LM83 and compatibles"
  1101. depends on I2C
  1102. select REGMAP
  1103. help
  1104. If you say yes here you get support for National Semiconductor
  1105. LM82 and LM83 sensor chips.
  1106. This driver can also be built as a module. If so, the module
  1107. will be called lm83.
  1108. config SENSORS_LM85
  1109. tristate "National Semiconductor LM85 and compatibles"
  1110. depends on I2C
  1111. select HWMON_VID
  1112. help
  1113. If you say yes here you get support for National Semiconductor LM85
  1114. sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
  1115. EMC6D101, EMC6D102, and EMC6D103.
  1116. This driver can also be built as a module. If so, the module
  1117. will be called lm85.
  1118. config SENSORS_LM87
  1119. tristate "National Semiconductor LM87 and compatibles"
  1120. depends on I2C
  1121. select HWMON_VID
  1122. help
  1123. If you say yes here you get support for National Semiconductor LM87
  1124. and Analog Devices ADM1024 sensor chips.
  1125. This driver can also be built as a module. If so, the module
  1126. will be called lm87.
  1127. config SENSORS_LM90
  1128. tristate "National Semiconductor LM90 and compatibles"
  1129. depends on I2C
  1130. help
  1131. If you say yes here you get support for National Semiconductor LM84,
  1132. LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A,
  1133. ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A,
  1134. Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654,
  1135. MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695,
  1136. MAX6696,
  1137. ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218,
  1138. Winbond/Nuvoton W83L771W/G/AWG/ASG,
  1139. Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461
  1140. sensor chips.
  1141. This driver can also be built as a module. If so, the module
  1142. will be called lm90.
  1143. config SENSORS_LM92
  1144. tristate "National Semiconductor LM92 and compatibles"
  1145. depends on I2C
  1146. help
  1147. If you say yes here you get support for National Semiconductor LM92
  1148. and Maxim MAX6635 sensor chips.
  1149. This driver can also be built as a module. If so, the module
  1150. will be called lm92.
  1151. config SENSORS_LM93
  1152. tristate "National Semiconductor LM93 and compatibles"
  1153. depends on I2C
  1154. select HWMON_VID
  1155. help
  1156. If you say yes here you get support for National Semiconductor LM93,
  1157. LM94, and compatible sensor chips.
  1158. This driver can also be built as a module. If so, the module
  1159. will be called lm93.
  1160. config SENSORS_LM95234
  1161. tristate "National Semiconductor LM95234 and compatibles"
  1162. depends on I2C
  1163. help
  1164. If you say yes here you get support for the LM95233 and LM95234
  1165. temperature sensor chips.
  1166. This driver can also be built as a module. If so, the module
  1167. will be called lm95234.
  1168. config SENSORS_LM95241
  1169. tristate "National Semiconductor LM95241 and compatibles"
  1170. depends on I2C
  1171. help
  1172. If you say yes here you get support for LM95231 and LM95241 sensor
  1173. chips.
  1174. This driver can also be built as a module. If so, the module
  1175. will be called lm95241.
  1176. config SENSORS_LM95245
  1177. tristate "National Semiconductor LM95245 and compatibles"
  1178. depends on I2C
  1179. select REGMAP_I2C
  1180. help
  1181. If you say yes here you get support for LM95235 and LM95245
  1182. temperature sensor chips.
  1183. This driver can also be built as a module. If so, the module
  1184. will be called lm95245.
  1185. config SENSORS_PC87360
  1186. tristate "National Semiconductor PC87360 family"
  1187. depends on !PPC
  1188. select HWMON_VID
  1189. help
  1190. If you say yes here you get access to the hardware monitoring
  1191. functions of the National Semiconductor PC8736x Super-I/O chips.
  1192. The PC87360, PC87363 and PC87364 only have fan monitoring and
  1193. control. The PC87365 and PC87366 additionally have voltage and
  1194. temperature monitoring.
  1195. This driver can also be built as a module. If so, the module
  1196. will be called pc87360.
  1197. config SENSORS_PC87427
  1198. tristate "National Semiconductor PC87427"
  1199. depends on !PPC
  1200. help
  1201. If you say yes here you get access to the hardware monitoring
  1202. functions of the National Semiconductor PC87427 Super-I/O chip.
  1203. The chip has two distinct logical devices, one for fan speed
  1204. monitoring and control, and one for voltage and temperature
  1205. monitoring. Fan speed monitoring and control are supported, as
  1206. well as temperature monitoring. Voltages aren't supported yet.
  1207. This driver can also be built as a module. If so, the module
  1208. will be called pc87427.
  1209. config SENSORS_NTC_THERMISTOR
  1210. tristate "NTC thermistor support"
  1211. depends on IIO
  1212. depends on THERMAL || !THERMAL_OF
  1213. help
  1214. This driver supports NTC thermistors sensor reading and its
  1215. interpretation. The driver can also monitor the temperature and
  1216. send notifications about the temperature.
  1217. Currently, this driver supports
  1218. NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
  1219. NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and
  1220. B57891S0103 from EPCOS.
  1221. This driver can also be built as a module. If so, the module
  1222. will be called ntc-thermistor.
  1223. config SENSORS_NCT6683
  1224. tristate "Nuvoton NCT6683D"
  1225. depends on !PPC
  1226. help
  1227. If you say yes here you get support for the hardware monitoring
  1228. functionality of the Nuvoton NCT6683D eSIO chip.
  1229. This driver can also be built as a module. If so, the module
  1230. will be called nct6683.
  1231. config SENSORS_NCT6775_CORE
  1232. tristate
  1233. select REGMAP
  1234. help
  1235. This module contains common code shared by the platform and
  1236. i2c versions of the nct6775 driver; it is not useful on its
  1237. own.
  1238. If built as a module, the module will be called
  1239. nct6775-core.
  1240. config SENSORS_NCT6775
  1241. tristate "Platform driver for Nuvoton NCT6775F and compatibles"
  1242. depends on !PPC
  1243. depends on ACPI || ACPI=n
  1244. select HWMON_VID
  1245. select SENSORS_NCT6775_CORE
  1246. help
  1247. If you say yes here you get support for the hardware monitoring
  1248. functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
  1249. NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
  1250. Super-I/O chips. This driver replaces the w83627ehf driver for
  1251. NCT6775F and NCT6776F.
  1252. This driver can also be built as a module. If so, the module
  1253. will be called nct6775.
  1254. config SENSORS_NCT6775_I2C
  1255. tristate "I2C driver for Nuvoton NCT6775F and compatibles"
  1256. depends on I2C
  1257. select REGMAP_I2C
  1258. select SENSORS_NCT6775_CORE
  1259. help
  1260. If you say yes here you get support for the hardware monitoring
  1261. functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
  1262. NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
  1263. Super-I/O chips via their I2C interface.
  1264. If you're not building a kernel for a BMC, this is probably
  1265. not the driver you want (see CONFIG_SENSORS_NCT6775).
  1266. This driver can also be built as a module. If so, the module
  1267. will be called nct6775-i2c.
  1268. config SENSORS_NCT7802
  1269. tristate "Nuvoton NCT7802Y"
  1270. depends on I2C
  1271. select REGMAP_I2C
  1272. help
  1273. If you say yes here you get support for the Nuvoton NCT7802Y
  1274. hardware monitoring chip.
  1275. This driver can also be built as a module. If so, the module
  1276. will be called nct7802.
  1277. config SENSORS_NCT7904
  1278. tristate "Nuvoton NCT7904"
  1279. depends on I2C && WATCHDOG
  1280. select WATCHDOG_CORE
  1281. help
  1282. If you say yes here you get support for the Nuvoton NCT7904
  1283. hardware monitoring chip, including manual fan speed control
  1284. and support for the integrated watchdog.
  1285. This driver can also be built as a module. If so, the module
  1286. will be called nct7904.
  1287. config SENSORS_NPCM7XX
  1288. tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers"
  1289. imply THERMAL
  1290. help
  1291. This driver provides support for Nuvoton NPCM750/730/715/705 PWM
  1292. and Fan controllers.
  1293. This driver can also be built as a module. If so, the module
  1294. will be called npcm750-pwm-fan.
  1295. config SENSORS_NSA320
  1296. tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
  1297. depends on GPIOLIB && OF
  1298. depends on MACH_KIRKWOOD || COMPILE_TEST
  1299. help
  1300. If you say yes here you get support for hardware monitoring
  1301. for the ZyXEL NSA320 Media Server and other compatible devices
  1302. (probably the NSA325 and some NSA310 variants).
  1303. The sensor data is taken from a Holtek HT46R065 microcontroller
  1304. connected to GPIO lines.
  1305. This driver can also be built as a module. If so, the module
  1306. will be called nsa320-hwmon.
  1307. config SENSORS_NZXT_KRAKEN2
  1308. tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers"
  1309. depends on USB_HID
  1310. help
  1311. If you say yes here you get support for hardware monitoring for the
  1312. NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers.
  1313. This driver can also be built as a module. If so, the module
  1314. will be called nzxt-kraken2.
  1315. config SENSORS_NZXT_SMART2
  1316. tristate "NZXT RGB & Fan Controller/Smart Device v2"
  1317. depends on USB_HID
  1318. help
  1319. If you say yes here you get support for hardware monitoring for the
  1320. NZXT RGB & Fan Controller/Smart Device v2.
  1321. This driver can also be built as a module. If so, the module
  1322. will be called nzxt-smart2.
  1323. source "drivers/hwmon/occ/Kconfig"
  1324. config SENSORS_PCF8591
  1325. tristate "Philips PCF8591 ADC/DAC"
  1326. depends on I2C
  1327. help
  1328. If you say yes here you get support for Philips PCF8591 4-channel
  1329. ADC, 1-channel DAC chips.
  1330. This driver can also be built as a module. If so, the module
  1331. will be called pcf8591.
  1332. These devices are hard to detect and rarely found on mainstream
  1333. hardware. If unsure, say N.
  1334. source "drivers/hwmon/peci/Kconfig"
  1335. source "drivers/hwmon/pmbus/Kconfig"
  1336. config SENSORS_PWM_FAN
  1337. tristate "PWM fan"
  1338. depends on (PWM && OF) || COMPILE_TEST
  1339. depends on THERMAL || THERMAL=n
  1340. help
  1341. If you say yes here you get support for fans connected to PWM lines.
  1342. The driver uses the generic PWM interface, thus it will work on a
  1343. variety of SoCs.
  1344. This driver can also be built as a module. If so, the module
  1345. will be called pwm-fan.
  1346. config SENSORS_QTI_AMOLED_ECM
  1347. tristate "Qualcomm Technologies, Inc. AMOLED Current Monitor"
  1348. depends on SPMI
  1349. help
  1350. Qualcomm Technologies, Inc. ECM driver supports measurement of
  1351. OLED display power with a time granularity in sub-frame or
  1352. multiple frames of image data. The measurement can be for a short
  1353. period (N frames) or a long period (continuous mode).
  1354. To compile this driver as module, choose M here: the module will
  1355. be called qti_amoled_ecm.
  1356. config SENSORS_RASPBERRYPI_HWMON
  1357. tristate "Raspberry Pi voltage monitor"
  1358. depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
  1359. help
  1360. If you say yes here you get support for voltage sensor on the
  1361. Raspberry Pi.
  1362. This driver can also be built as a module. If so, the module
  1363. will be called raspberrypi-hwmon.
  1364. config SENSORS_SL28CPLD
  1365. tristate "Kontron sl28cpld hardware monitoring driver"
  1366. depends on MFD_SL28CPLD || COMPILE_TEST
  1367. help
  1368. If you say yes here you get support for the fan supervisor of the
  1369. sl28cpld board management controller.
  1370. This driver can also be built as a module. If so, the module
  1371. will be called sl28cpld-hwmon.
  1372. config SENSORS_SBTSI
  1373. tristate "Emulated SB-TSI temperature sensor"
  1374. depends on I2C
  1375. help
  1376. If you say yes here you get support for emulated temperature
  1377. sensors on AMD SoCs with SB-TSI interface connected to a BMC device.
  1378. This driver can also be built as a module. If so, the module will
  1379. be called sbtsi_temp.
  1380. config SENSORS_SBRMI
  1381. tristate "Emulated SB-RMI sensor"
  1382. depends on I2C
  1383. help
  1384. If you say yes here you get support for emulated RMI
  1385. sensors on AMD SoCs with APML interface connected to a BMC device.
  1386. This driver can also be built as a module. If so, the module will
  1387. be called sbrmi.
  1388. config SENSORS_SHT15
  1389. tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
  1390. depends on GPIOLIB || COMPILE_TEST
  1391. select BITREVERSE
  1392. help
  1393. If you say yes here you get support for the Sensiron SHT10, SHT11,
  1394. SHT15, SHT71, SHT75 humidity and temperature sensors.
  1395. This driver can also be built as a module. If so, the module
  1396. will be called sht15.
  1397. config SENSORS_SHT21
  1398. tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
  1399. depends on I2C
  1400. help
  1401. If you say yes here you get support for the Sensiron SHT21, SHT25
  1402. humidity and temperature sensors.
  1403. This driver can also be built as a module. If so, the module
  1404. will be called sht21.
  1405. config SENSORS_SHT3x
  1406. tristate "Sensiron humidity and temperature sensors. SHT3x and compat."
  1407. depends on I2C
  1408. select CRC8
  1409. help
  1410. If you say yes here you get support for the Sensiron SHT30 and SHT31
  1411. humidity and temperature sensors.
  1412. This driver can also be built as a module. If so, the module
  1413. will be called sht3x.
  1414. config SENSORS_SHT4x
  1415. tristate "Sensiron humidity and temperature sensors. SHT4x and compat."
  1416. depends on I2C
  1417. select CRC8
  1418. help
  1419. If you say yes here you get support for the Sensiron SHT40, SHT41 and
  1420. SHT45 humidity and temperature sensors.
  1421. This driver can also be built as a module. If so, the module
  1422. will be called sht4x.
  1423. config SENSORS_SHTC1
  1424. tristate "Sensiron humidity and temperature sensors. SHTC1 and compat."
  1425. depends on I2C
  1426. help
  1427. If you say yes here you get support for the Sensiron SHTC1, SHTW1,
  1428. and SHTC3 humidity and temperature sensors.
  1429. This driver can also be built as a module. If so, the module
  1430. will be called shtc1.
  1431. config SENSORS_S3C
  1432. tristate "Samsung built-in ADC"
  1433. depends on S3C_ADC
  1434. help
  1435. If you say yes here you get support for the on-board ADCs of
  1436. the Samsung S3C24XX, S3C64XX and other series of SoC
  1437. This driver can also be built as a module. If so, the module
  1438. will be called s3c-hwmon.
  1439. config SENSORS_S3C_RAW
  1440. bool "Include raw channel attributes in sysfs"
  1441. depends on SENSORS_S3C
  1442. help
  1443. Say Y here if you want to include raw copies of all the ADC
  1444. channels in sysfs.
  1445. config SENSORS_SIS5595
  1446. tristate "Silicon Integrated Systems Corp. SiS5595"
  1447. depends on PCI
  1448. help
  1449. If you say yes here you get support for the integrated sensors in
  1450. SiS5595 South Bridges.
  1451. This driver can also be built as a module. If so, the module
  1452. will be called sis5595.
  1453. config SENSORS_SY7636A
  1454. tristate "Silergy SY7636A"
  1455. depends on MFD_SY7636A
  1456. help
  1457. If you say yes here you get support for the thermistor readout of
  1458. the Silergy SY7636A PMIC.
  1459. This driver can also be built as a module. If so, the module
  1460. will be called sy7636a-hwmon.
  1461. config SENSORS_DME1737
  1462. tristate "SMSC DME1737, SCH311x and compatibles"
  1463. depends on I2C && !PPC
  1464. select HWMON_VID
  1465. help
  1466. If you say yes here you get support for the hardware monitoring
  1467. and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
  1468. Asus A8000 Super-I/O chips.
  1469. This driver can also be built as a module. If so, the module
  1470. will be called dme1737.
  1471. config SENSORS_EMC1403
  1472. tristate "SMSC EMC1403/23 thermal sensor"
  1473. depends on I2C
  1474. select REGMAP_I2C
  1475. help
  1476. If you say yes here you get support for the SMSC EMC1403/23
  1477. temperature monitoring chip.
  1478. Threshold values can be configured using sysfs.
  1479. Data from the different diodes are accessible via sysfs.
  1480. config SENSORS_EMC2103
  1481. tristate "SMSC EMC2103"
  1482. depends on I2C
  1483. help
  1484. If you say yes here you get support for the temperature
  1485. and fan sensors of the SMSC EMC2103 chips.
  1486. This driver can also be built as a module. If so, the module
  1487. will be called emc2103.
  1488. config SENSORS_EMC2305
  1489. tristate "Microchip EMC2305 and compatible EMC2301/2/3"
  1490. depends on I2C
  1491. imply THERMAL
  1492. help
  1493. If you say yes here you get support for the Microchip EMC2305
  1494. fan controller chips.
  1495. The Microchip EMC2305 is a fan controller for up to 5 fans.
  1496. Fan rotation speeds are reported in RPM.
  1497. This driver can also be built as a module. If so, the module
  1498. will be called emc2305.
  1499. config SENSORS_EMC6W201
  1500. tristate "SMSC EMC6W201"
  1501. depends on I2C
  1502. help
  1503. If you say yes here you get support for the SMSC EMC6W201
  1504. hardware monitoring chip.
  1505. This driver can also be built as a module. If so, the module
  1506. will be called emc6w201.
  1507. config SENSORS_SMSC47M1
  1508. tristate "SMSC LPC47M10x and compatibles"
  1509. depends on !PPC
  1510. help
  1511. If you say yes here you get support for the integrated fan
  1512. monitoring and control capabilities of the SMSC LPC47B27x,
  1513. LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
  1514. LPC47M192, LPC47M292 and LPC47M997 chips.
  1515. The temperature and voltage sensor features of the LPC47M15x,
  1516. LPC47M192, LPC47M292 and LPC47M997 are supported by another
  1517. driver, select also "SMSC LPC47M192 and compatibles" below for
  1518. those.
  1519. This driver can also be built as a module. If so, the module
  1520. will be called smsc47m1.
  1521. config SENSORS_SMSC47M192
  1522. tristate "SMSC LPC47M192 and compatibles"
  1523. depends on I2C
  1524. select HWMON_VID
  1525. help
  1526. If you say yes here you get support for the temperature and
  1527. voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
  1528. and LPC47M997 chips.
  1529. The fan monitoring and control capabilities of these chips
  1530. are supported by another driver, select
  1531. "SMSC LPC47M10x and compatibles" above. You need both drivers
  1532. if you want fan control and voltage/temperature sensor support.
  1533. This driver can also be built as a module. If so, the module
  1534. will be called smsc47m192.
  1535. config SENSORS_SMSC47B397
  1536. tristate "SMSC LPC47B397-NC"
  1537. depends on !PPC
  1538. help
  1539. If you say yes here you get support for the SMSC LPC47B397-NC
  1540. sensor chip.
  1541. This driver can also be built as a module. If so, the module
  1542. will be called smsc47b397.
  1543. config SENSORS_SCH56XX_COMMON
  1544. tristate
  1545. config SENSORS_SCH5627
  1546. tristate "SMSC SCH5627"
  1547. depends on !PPC && WATCHDOG
  1548. select SENSORS_SCH56XX_COMMON
  1549. select WATCHDOG_CORE
  1550. help
  1551. If you say yes here you get support for the hardware monitoring
  1552. features of the SMSC SCH5627 Super-I/O chip including support for
  1553. the integrated watchdog.
  1554. This driver can also be built as a module. If so, the module
  1555. will be called sch5627.
  1556. config SENSORS_SCH5636
  1557. tristate "SMSC SCH5636"
  1558. depends on !PPC && WATCHDOG
  1559. select SENSORS_SCH56XX_COMMON
  1560. select WATCHDOG_CORE
  1561. help
  1562. SMSC SCH5636 Super I/O chips include an embedded microcontroller for
  1563. hardware monitoring solutions, allowing motherboard manufacturers to
  1564. create their own custom hwmon solution based upon the SCH5636.
  1565. Currently this driver only supports the Fujitsu Theseus SCH5636 based
  1566. hwmon solution. Say yes here if you want support for the Fujitsu
  1567. Theseus' hardware monitoring features including support for the
  1568. integrated watchdog.
  1569. This driver can also be built as a module. If so, the module
  1570. will be called sch5636.
  1571. config SENSORS_STTS751
  1572. tristate "ST Microelectronics STTS751"
  1573. depends on I2C
  1574. help
  1575. If you say yes here you get support for STTS751
  1576. temperature sensor chips.
  1577. This driver can also be built as a module. If so, the module
  1578. will be called stts751.
  1579. config SENSORS_SMM665
  1580. tristate "Summit Microelectronics SMM665"
  1581. depends on I2C
  1582. help
  1583. If you say yes here you get support for the hardware monitoring
  1584. features of the Summit Microelectronics SMM665/SMM665B Six-Channel
  1585. Active DC Output Controller / Monitor.
  1586. Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
  1587. Support for those chips is untested.
  1588. This driver can also be built as a module. If so, the module will
  1589. be called smm665.
  1590. config SENSORS_ADC128D818
  1591. tristate "Texas Instruments ADC128D818"
  1592. depends on I2C
  1593. help
  1594. If you say yes here you get support for the Texas Instruments
  1595. ADC128D818 System Monitor with Temperature Sensor chip.
  1596. This driver can also be built as a module. If so, the module
  1597. will be called adc128d818.
  1598. config SENSORS_ADS7828
  1599. tristate "Texas Instruments ADS7828 and compatibles"
  1600. depends on I2C
  1601. select REGMAP_I2C
  1602. help
  1603. If you say yes here you get support for Texas Instruments ADS7828 and
  1604. ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
  1605. it is 8-bit on ADS7830.
  1606. This driver can also be built as a module. If so, the module
  1607. will be called ads7828.
  1608. config SENSORS_ADS7871
  1609. tristate "Texas Instruments ADS7871 A/D converter"
  1610. depends on SPI
  1611. help
  1612. If you say yes here you get support for TI ADS7871 & ADS7870
  1613. This driver can also be built as a module. If so, the module
  1614. will be called ads7871.
  1615. config SENSORS_AMC6821
  1616. tristate "Texas Instruments AMC6821"
  1617. depends on I2C
  1618. help
  1619. If you say yes here you get support for the Texas Instruments
  1620. AMC6821 hardware monitoring chips.
  1621. This driver can also be built as a module. If so, the module
  1622. will be called amc6821.
  1623. config SENSORS_INA209
  1624. tristate "TI / Burr Brown INA209"
  1625. depends on I2C
  1626. help
  1627. If you say yes here you get support for the TI / Burr Brown INA209
  1628. voltage / current / power monitor I2C interface.
  1629. This driver can also be built as a module. If so, the module will
  1630. be called ina209.
  1631. config SENSORS_INA2XX
  1632. tristate "Texas Instruments INA219 and compatibles"
  1633. depends on I2C
  1634. select REGMAP_I2C
  1635. help
  1636. If you say yes here you get support for INA219, INA220, INA226,
  1637. INA230, and INA231 power monitor chips.
  1638. The INA2xx driver is configured for the default configuration of
  1639. the part as described in the datasheet.
  1640. Default value for Rshunt is 10 mOhms.
  1641. This driver can also be built as a module. If so, the module
  1642. will be called ina2xx.
  1643. config SENSORS_INA238
  1644. tristate "Texas Instruments INA238"
  1645. depends on I2C
  1646. select REGMAP_I2C
  1647. help
  1648. If you say yes here you get support for the INA238 power monitor
  1649. chip. This driver supports voltage, current, power and temperature
  1650. measurements as well as alarm configuration.
  1651. This driver can also be built as a module. If so, the module
  1652. will be called ina238.
  1653. config SENSORS_INA3221
  1654. tristate "Texas Instruments INA3221 Triple Power Monitor"
  1655. depends on I2C
  1656. select REGMAP_I2C
  1657. help
  1658. If you say yes here you get support for the TI INA3221 Triple Power
  1659. Monitor.
  1660. This driver can also be built as a module. If so, the module
  1661. will be called ina3221.
  1662. config SENSORS_TC74
  1663. tristate "Microchip TC74"
  1664. depends on I2C
  1665. help
  1666. If you say yes here you get support for Microchip TC74 single
  1667. input temperature sensor chips.
  1668. This driver can also be built as a module. If so, the module
  1669. will be called tc74.
  1670. config SENSORS_THMC50
  1671. tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
  1672. depends on I2C
  1673. help
  1674. If you say yes here you get support for Texas Instruments THMC50
  1675. sensor chips and clones: the Analog Devices ADM1022.
  1676. This driver can also be built as a module. If so, the module
  1677. will be called thmc50.
  1678. config SENSORS_TMP102
  1679. tristate "Texas Instruments TMP102"
  1680. depends on I2C
  1681. select REGMAP_I2C
  1682. help
  1683. If you say yes here you get support for Texas Instruments TMP102
  1684. sensor chips.
  1685. This driver can also be built as a module. If so, the module
  1686. will be called tmp102.
  1687. config SENSORS_TMP103
  1688. tristate "Texas Instruments TMP103"
  1689. depends on I2C
  1690. select REGMAP_I2C
  1691. help
  1692. If you say yes here you get support for Texas Instruments TMP103
  1693. sensor chips.
  1694. This driver can also be built as a module. If so, the module
  1695. will be called tmp103.
  1696. config SENSORS_TMP108
  1697. tristate "Texas Instruments TMP108"
  1698. depends on I2C
  1699. select REGMAP_I2C
  1700. help
  1701. If you say yes here you get support for Texas Instruments TMP108
  1702. sensor chips.
  1703. This driver can also be built as a module. If so, the module
  1704. will be called tmp108.
  1705. config SENSORS_TMP401
  1706. tristate "Texas Instruments TMP401 and compatibles"
  1707. depends on I2C
  1708. select REGMAP
  1709. help
  1710. If you say yes here you get support for Texas Instruments TMP401,
  1711. TMP411, TMP431, TMP432, and TMP435 temperature sensor chips.
  1712. This driver can also be built as a module. If so, the module
  1713. will be called tmp401.
  1714. config SENSORS_TMP421
  1715. tristate "Texas Instruments TMP421 and compatible"
  1716. depends on I2C
  1717. help
  1718. If you say yes here you get support for Texas Instruments TMP421,
  1719. TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.
  1720. This driver can also be built as a module. If so, the module
  1721. will be called tmp421.
  1722. config SENSORS_TMP464
  1723. tristate "Texas Instruments TMP464 and compatible"
  1724. depends on I2C
  1725. select REGMAP_I2C
  1726. help
  1727. If you say yes here you get support for Texas Instruments TMP464
  1728. and TMP468 temperature sensor chips.
  1729. This driver can also be built as a module. If so, the module
  1730. will be called tmp464.
  1731. config SENSORS_TMP513
  1732. tristate "Texas Instruments TMP513 and compatibles"
  1733. depends on I2C
  1734. help
  1735. If you say yes here you get support for Texas Instruments TMP512,
  1736. and TMP513 temperature and power supply sensor chips.
  1737. This driver can also be built as a module. If so, the module
  1738. will be called tmp513.
  1739. config SENSORS_VEXPRESS
  1740. tristate "Versatile Express"
  1741. depends on VEXPRESS_CONFIG
  1742. help
  1743. This driver provides support for hardware sensors available on
  1744. the ARM Ltd's Versatile Express platform. It can provide wide
  1745. range of information like temperature, power, energy.
  1746. config SENSORS_VIA_CPUTEMP
  1747. tristate "VIA CPU temperature sensor"
  1748. depends on X86
  1749. select HWMON_VID
  1750. help
  1751. If you say yes here you get support for the temperature
  1752. sensor inside your CPU. Supported are all known variants of
  1753. the VIA C7 and Nano.
  1754. config SENSORS_VIA686A
  1755. tristate "VIA686A"
  1756. depends on PCI
  1757. help
  1758. If you say yes here you get support for the integrated sensors in
  1759. Via 686A/B South Bridges.
  1760. This driver can also be built as a module. If so, the module
  1761. will be called via686a.
  1762. config SENSORS_VT1211
  1763. tristate "VIA VT1211"
  1764. depends on !PPC
  1765. select HWMON_VID
  1766. help
  1767. If you say yes here then you get support for hardware monitoring
  1768. features of the VIA VT1211 Super-I/O chip.
  1769. This driver can also be built as a module. If so, the module
  1770. will be called vt1211.
  1771. config SENSORS_VT8231
  1772. tristate "VIA VT8231"
  1773. depends on PCI
  1774. select HWMON_VID
  1775. help
  1776. If you say yes here then you get support for the integrated sensors
  1777. in the VIA VT8231 device.
  1778. This driver can also be built as a module. If so, the module
  1779. will be called vt8231.
  1780. config SENSORS_W83773G
  1781. tristate "Nuvoton W83773G"
  1782. depends on I2C
  1783. select REGMAP_I2C
  1784. help
  1785. If you say yes here you get support for the Nuvoton W83773G hardware
  1786. monitoring chip.
  1787. This driver can also be built as a module. If so, the module
  1788. will be called w83773g.
  1789. config SENSORS_W83781D
  1790. tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
  1791. depends on I2C
  1792. select HWMON_VID
  1793. help
  1794. If you say yes here you get support for the Winbond W8378x series
  1795. of sensor chips: the W83781D, W83782D and W83783S, and the similar
  1796. Asus AS99127F.
  1797. This driver can also be built as a module. If so, the module
  1798. will be called w83781d.
  1799. config SENSORS_W83791D
  1800. tristate "Winbond W83791D"
  1801. depends on I2C
  1802. select HWMON_VID
  1803. help
  1804. If you say yes here you get support for the Winbond W83791D chip.
  1805. This driver can also be built as a module. If so, the module
  1806. will be called w83791d.
  1807. config SENSORS_W83792D
  1808. tristate "Winbond W83792D"
  1809. depends on I2C
  1810. help
  1811. If you say yes here you get support for the Winbond W83792D chip.
  1812. This driver can also be built as a module. If so, the module
  1813. will be called w83792d.
  1814. config SENSORS_W83793
  1815. tristate "Winbond W83793"
  1816. depends on I2C
  1817. select HWMON_VID
  1818. help
  1819. If you say yes here you get support for the Winbond W83793
  1820. hardware monitoring chip, including support for the integrated
  1821. watchdog.
  1822. This driver can also be built as a module. If so, the module
  1823. will be called w83793.
  1824. config SENSORS_W83795
  1825. tristate "Winbond/Nuvoton W83795G/ADG"
  1826. depends on I2C
  1827. help
  1828. If you say yes here you get support for the Winbond W83795G and
  1829. W83795ADG hardware monitoring chip, including manual fan speed
  1830. control.
  1831. This driver can also be built as a module. If so, the module
  1832. will be called w83795.
  1833. config SENSORS_W83795_FANCTRL
  1834. bool "Include automatic fan control support"
  1835. depends on SENSORS_W83795
  1836. help
  1837. If you say yes here, support for automatic fan speed control
  1838. will be included in the driver.
  1839. Please also note that this option will create sysfs attribute
  1840. files which may change in the future, so you shouldn't rely
  1841. on them being stable.
  1842. config SENSORS_W83L785TS
  1843. tristate "Winbond W83L785TS-S"
  1844. depends on I2C
  1845. help
  1846. If you say yes here you get support for the Winbond W83L785TS-S
  1847. sensor chip, which is used on the Asus A7N8X, among other
  1848. motherboards.
  1849. This driver can also be built as a module. If so, the module
  1850. will be called w83l785ts.
  1851. config SENSORS_W83L786NG
  1852. tristate "Winbond W83L786NG, W83L786NR"
  1853. depends on I2C
  1854. help
  1855. If you say yes here you get support for the Winbond W83L786NG
  1856. and W83L786NR sensor chips.
  1857. This driver can also be built as a module. If so, the module
  1858. will be called w83l786ng.
  1859. config SENSORS_W83627HF
  1860. tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
  1861. depends on !PPC
  1862. select HWMON_VID
  1863. help
  1864. If you say yes here you get support for the Winbond W836X7 series
  1865. of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
  1866. W83697HF.
  1867. This driver can also be built as a module. If so, the module
  1868. will be called w83627hf.
  1869. config SENSORS_W83627EHF
  1870. tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG"
  1871. depends on !PPC
  1872. select HWMON_VID
  1873. help
  1874. If you say yes here you get support for the hardware
  1875. monitoring functionality of the Winbond W83627EHF Super-I/O chip.
  1876. This driver also supports the W83627EHG, which is the lead-free
  1877. version of the W83627EHF, and the W83627DHG, which is a similar
  1878. chip suited for specific Intel processors that use PECI such as
  1879. the Core 2 Duo. And also the W83627UHG, which is a stripped down
  1880. version of the W83627DHG (as far as hardware monitoring goes.)
  1881. This driver also supports Nuvoton W83667HG and W83667HG-B.
  1882. This driver can also be built as a module. If so, the module
  1883. will be called w83627ehf.
  1884. config SENSORS_WM831X
  1885. tristate "WM831x PMICs"
  1886. depends on MFD_WM831X
  1887. help
  1888. If you say yes here you get support for the hardware
  1889. monitoring functionality of the Wolfson Microelectronics
  1890. WM831x series of PMICs.
  1891. This driver can also be built as a module. If so, the module
  1892. will be called wm831x-hwmon.
  1893. config SENSORS_WM8350
  1894. tristate "Wolfson Microelectronics WM835x"
  1895. depends on MFD_WM8350
  1896. help
  1897. If you say yes here you get support for the hardware
  1898. monitoring features of the WM835x series of PMICs.
  1899. This driver can also be built as a module. If so, the module
  1900. will be called wm8350-hwmon.
  1901. config SENSORS_ULTRA45
  1902. tristate "Sun Ultra45 PIC16F747"
  1903. depends on SPARC64
  1904. help
  1905. This driver provides support for the Ultra45 workstation environmental
  1906. sensors.
  1907. config SENSORS_XGENE
  1908. tristate "APM X-Gene SoC hardware monitoring driver"
  1909. depends on XGENE_SLIMPRO_MBOX || PCC
  1910. help
  1911. If you say yes here you get support for the temperature
  1912. and power sensors for APM X-Gene SoC.
  1913. config SENSORS_INTEL_M10_BMC_HWMON
  1914. tristate "Intel MAX10 BMC Hardware Monitoring"
  1915. depends on MFD_INTEL_M10_BMC
  1916. help
  1917. This driver provides support for the hardware monitoring functionality
  1918. on Intel MAX10 BMC chip.
  1919. This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its
  1920. sensors monitor various telemetry data of different components on the
  1921. card, e.g. board temperature, FPGA core temperature/voltage/current.
  1922. if ACPI
  1923. comment "ACPI drivers"
  1924. config SENSORS_ACPI_POWER
  1925. tristate "ACPI 4.0 power meter"
  1926. help
  1927. This driver exposes ACPI 4.0 power meters as hardware monitoring
  1928. devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
  1929. and a power meter.
  1930. To compile this driver as a module, choose M here:
  1931. the module will be called acpi_power_meter.
  1932. config SENSORS_ATK0110
  1933. tristate "ASUS ATK0110"
  1934. depends on X86
  1935. help
  1936. If you say yes here you get support for the ACPI hardware
  1937. monitoring interface found in many ASUS motherboards. This
  1938. driver will provide readings of fans, voltages and temperatures
  1939. through the system firmware.
  1940. This driver can also be built as a module. If so, the module
  1941. will be called asus_atk0110.
  1942. config SENSORS_ASUS_WMI
  1943. tristate "ASUS WMI X370/X470/B450/X399"
  1944. depends on ACPI_WMI
  1945. help
  1946. If you say yes here you get support for the ACPI hardware monitoring
  1947. interface found in X370/X470/B450/X399 ASUS motherboards. This driver
  1948. will provide readings of fans, voltages and temperatures through the system
  1949. firmware.
  1950. This driver can also be built as a module. If so, the module
  1951. will be called asus_wmi_sensors.
  1952. config SENSORS_ASUS_EC
  1953. tristate "ASUS EC Sensors"
  1954. depends on X86
  1955. help
  1956. If you say yes here you get support for the ACPI embedded controller
  1957. hardware monitoring interface found in ASUS motherboards. The driver
  1958. currently supports B550/X570 boards, although other ASUS boards might
  1959. provide this monitoring interface as well.
  1960. This driver can also be built as a module. If so, the module
  1961. will be called asus_ec_sensors.
  1962. endif # ACPI
  1963. endif # HWMON