123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361 |
- // SPDX-License-Identifier: GPL-2.0+
- /*
- * Copyright 2018 NXP
- * Author: Dong Aisheng <[email protected]>
- *
- * Implementation of the SCU IPC functions using MUs (client side).
- *
- */
- #include <linux/err.h>
- #include <linux/firmware/imx/ipc.h>
- #include <linux/firmware/imx/sci.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
- #include <linux/kernel.h>
- #include <linux/mailbox_client.h>
- #include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/of_platform.h>
- #include <linux/platform_device.h>
- #define SCU_MU_CHAN_NUM 8
- #define MAX_RX_TIMEOUT (msecs_to_jiffies(30))
- struct imx_sc_chan {
- struct imx_sc_ipc *sc_ipc;
- struct mbox_client cl;
- struct mbox_chan *ch;
- int idx;
- struct completion tx_done;
- };
- struct imx_sc_ipc {
- /* SCU uses 4 Tx and 4 Rx channels */
- struct imx_sc_chan chans[SCU_MU_CHAN_NUM];
- struct device *dev;
- struct mutex lock;
- struct completion done;
- bool fast_ipc;
- /* temporarily store the SCU msg */
- u32 *msg;
- u8 rx_size;
- u8 count;
- };
- /*
- * This type is used to indicate error response for most functions.
- */
- enum imx_sc_error_codes {
- IMX_SC_ERR_NONE = 0, /* Success */
- IMX_SC_ERR_VERSION = 1, /* Incompatible API version */
- IMX_SC_ERR_CONFIG = 2, /* Configuration error */
- IMX_SC_ERR_PARM = 3, /* Bad parameter */
- IMX_SC_ERR_NOACCESS = 4, /* Permission error (no access) */
- IMX_SC_ERR_LOCKED = 5, /* Permission error (locked) */
- IMX_SC_ERR_UNAVAILABLE = 6, /* Unavailable (out of resources) */
- IMX_SC_ERR_NOTFOUND = 7, /* Not found */
- IMX_SC_ERR_NOPOWER = 8, /* No power */
- IMX_SC_ERR_IPC = 9, /* Generic IPC error */
- IMX_SC_ERR_BUSY = 10, /* Resource is currently busy/active */
- IMX_SC_ERR_FAIL = 11, /* General I/O failure */
- IMX_SC_ERR_LAST
- };
- static int imx_sc_linux_errmap[IMX_SC_ERR_LAST] = {
- 0, /* IMX_SC_ERR_NONE */
- -EINVAL, /* IMX_SC_ERR_VERSION */
- -EINVAL, /* IMX_SC_ERR_CONFIG */
- -EINVAL, /* IMX_SC_ERR_PARM */
- -EACCES, /* IMX_SC_ERR_NOACCESS */
- -EACCES, /* IMX_SC_ERR_LOCKED */
- -ERANGE, /* IMX_SC_ERR_UNAVAILABLE */
- -EEXIST, /* IMX_SC_ERR_NOTFOUND */
- -EPERM, /* IMX_SC_ERR_NOPOWER */
- -EPIPE, /* IMX_SC_ERR_IPC */
- -EBUSY, /* IMX_SC_ERR_BUSY */
- -EIO, /* IMX_SC_ERR_FAIL */
- };
- static struct imx_sc_ipc *imx_sc_ipc_handle;
- static inline int imx_sc_to_linux_errno(int errno)
- {
- if (errno >= IMX_SC_ERR_NONE && errno < IMX_SC_ERR_LAST)
- return imx_sc_linux_errmap[errno];
- return -EIO;
- }
- /*
- * Get the default handle used by SCU
- */
- int imx_scu_get_handle(struct imx_sc_ipc **ipc)
- {
- if (!imx_sc_ipc_handle)
- return -EPROBE_DEFER;
- *ipc = imx_sc_ipc_handle;
- return 0;
- }
- EXPORT_SYMBOL(imx_scu_get_handle);
- /* Callback called when the word of a message is ack-ed, eg read by SCU */
- static void imx_scu_tx_done(struct mbox_client *cl, void *mssg, int r)
- {
- struct imx_sc_chan *sc_chan = container_of(cl, struct imx_sc_chan, cl);
- complete(&sc_chan->tx_done);
- }
- static void imx_scu_rx_callback(struct mbox_client *c, void *msg)
- {
- struct imx_sc_chan *sc_chan = container_of(c, struct imx_sc_chan, cl);
- struct imx_sc_ipc *sc_ipc = sc_chan->sc_ipc;
- struct imx_sc_rpc_msg *hdr;
- u32 *data = msg;
- int i;
- if (!sc_ipc->msg) {
- dev_warn(sc_ipc->dev, "unexpected rx idx %d 0x%08x, ignore!\n",
- sc_chan->idx, *data);
- return;
- }
- if (sc_ipc->fast_ipc) {
- hdr = msg;
- sc_ipc->rx_size = hdr->size;
- sc_ipc->msg[0] = *data++;
- for (i = 1; i < sc_ipc->rx_size; i++)
- sc_ipc->msg[i] = *data++;
- complete(&sc_ipc->done);
- return;
- }
- if (sc_chan->idx == 0) {
- hdr = msg;
- sc_ipc->rx_size = hdr->size;
- dev_dbg(sc_ipc->dev, "msg rx size %u\n", sc_ipc->rx_size);
- if (sc_ipc->rx_size > 4)
- dev_warn(sc_ipc->dev, "RPC does not support receiving over 4 words: %u\n",
- sc_ipc->rx_size);
- }
- sc_ipc->msg[sc_chan->idx] = *data;
- sc_ipc->count++;
- dev_dbg(sc_ipc->dev, "mu %u msg %u 0x%x\n", sc_chan->idx,
- sc_ipc->count, *data);
- if ((sc_ipc->rx_size != 0) && (sc_ipc->count == sc_ipc->rx_size))
- complete(&sc_ipc->done);
- }
- static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg)
- {
- struct imx_sc_rpc_msg hdr = *(struct imx_sc_rpc_msg *)msg;
- struct imx_sc_chan *sc_chan;
- u32 *data = msg;
- int ret;
- int size;
- int i;
- /* Check size */
- if (hdr.size > IMX_SC_RPC_MAX_MSG)
- return -EINVAL;
- dev_dbg(sc_ipc->dev, "RPC SVC %u FUNC %u SIZE %u\n", hdr.svc,
- hdr.func, hdr.size);
- size = sc_ipc->fast_ipc ? 1 : hdr.size;
- for (i = 0; i < size; i++) {
- sc_chan = &sc_ipc->chans[i % 4];
- /*
- * SCU requires that all messages words are written
- * sequentially but linux MU driver implements multiple
- * independent channels for each register so ordering between
- * different channels must be ensured by SCU API interface.
- *
- * Wait for tx_done before every send to ensure that no
- * queueing happens at the mailbox channel level.
- */
- if (!sc_ipc->fast_ipc) {
- wait_for_completion(&sc_chan->tx_done);
- reinit_completion(&sc_chan->tx_done);
- }
- ret = mbox_send_message(sc_chan->ch, &data[i]);
- if (ret < 0)
- return ret;
- }
- return 0;
- }
- /*
- * RPC command/response
- */
- int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp)
- {
- uint8_t saved_svc, saved_func;
- struct imx_sc_rpc_msg *hdr;
- int ret;
- if (WARN_ON(!sc_ipc || !msg))
- return -EINVAL;
- mutex_lock(&sc_ipc->lock);
- reinit_completion(&sc_ipc->done);
- if (have_resp) {
- sc_ipc->msg = msg;
- saved_svc = ((struct imx_sc_rpc_msg *)msg)->svc;
- saved_func = ((struct imx_sc_rpc_msg *)msg)->func;
- }
- sc_ipc->count = 0;
- ret = imx_scu_ipc_write(sc_ipc, msg);
- if (ret < 0) {
- dev_err(sc_ipc->dev, "RPC send msg failed: %d\n", ret);
- goto out;
- }
- if (have_resp) {
- if (!wait_for_completion_timeout(&sc_ipc->done,
- MAX_RX_TIMEOUT)) {
- dev_err(sc_ipc->dev, "RPC send msg timeout\n");
- mutex_unlock(&sc_ipc->lock);
- return -ETIMEDOUT;
- }
- /* response status is stored in hdr->func field */
- hdr = msg;
- ret = hdr->func;
- /*
- * Some special SCU firmware APIs do NOT have return value
- * in hdr->func, but they do have response data, those special
- * APIs are defined as void function in SCU firmware, so they
- * should be treated as return success always.
- */
- if ((saved_svc == IMX_SC_RPC_SVC_MISC) &&
- (saved_func == IMX_SC_MISC_FUNC_UNIQUE_ID ||
- saved_func == IMX_SC_MISC_FUNC_GET_BUTTON_STATUS))
- ret = 0;
- }
- out:
- sc_ipc->msg = NULL;
- mutex_unlock(&sc_ipc->lock);
- dev_dbg(sc_ipc->dev, "RPC SVC done\n");
- return imx_sc_to_linux_errno(ret);
- }
- EXPORT_SYMBOL(imx_scu_call_rpc);
- static int imx_scu_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
- struct imx_sc_ipc *sc_ipc;
- struct imx_sc_chan *sc_chan;
- struct mbox_client *cl;
- char *chan_name;
- struct of_phandle_args args;
- int num_channel;
- int ret;
- int i;
- sc_ipc = devm_kzalloc(dev, sizeof(*sc_ipc), GFP_KERNEL);
- if (!sc_ipc)
- return -ENOMEM;
- ret = of_parse_phandle_with_args(pdev->dev.of_node, "mboxes",
- "#mbox-cells", 0, &args);
- if (ret)
- return ret;
- sc_ipc->fast_ipc = of_device_is_compatible(args.np, "fsl,imx8-mu-scu");
- num_channel = sc_ipc->fast_ipc ? 2 : SCU_MU_CHAN_NUM;
- for (i = 0; i < num_channel; i++) {
- if (i < num_channel / 2)
- chan_name = kasprintf(GFP_KERNEL, "tx%d", i);
- else
- chan_name = kasprintf(GFP_KERNEL, "rx%d",
- i - num_channel / 2);
- if (!chan_name)
- return -ENOMEM;
- sc_chan = &sc_ipc->chans[i];
- cl = &sc_chan->cl;
- cl->dev = dev;
- cl->tx_block = false;
- cl->knows_txdone = true;
- cl->rx_callback = imx_scu_rx_callback;
- if (!sc_ipc->fast_ipc) {
- /* Initial tx_done completion as "done" */
- cl->tx_done = imx_scu_tx_done;
- init_completion(&sc_chan->tx_done);
- complete(&sc_chan->tx_done);
- }
- sc_chan->sc_ipc = sc_ipc;
- sc_chan->idx = i % (num_channel / 2);
- sc_chan->ch = mbox_request_channel_byname(cl, chan_name);
- if (IS_ERR(sc_chan->ch)) {
- ret = PTR_ERR(sc_chan->ch);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "Failed to request mbox chan %s ret %d\n",
- chan_name, ret);
- kfree(chan_name);
- return ret;
- }
- dev_dbg(dev, "request mbox chan %s\n", chan_name);
- /* chan_name is not used anymore by framework */
- kfree(chan_name);
- }
- sc_ipc->dev = dev;
- mutex_init(&sc_ipc->lock);
- init_completion(&sc_ipc->done);
- imx_sc_ipc_handle = sc_ipc;
- ret = imx_scu_soc_init(dev);
- if (ret)
- dev_warn(dev, "failed to initialize SoC info: %d\n", ret);
- ret = imx_scu_enable_general_irq_channel(dev);
- if (ret)
- dev_warn(dev,
- "failed to enable general irq channel: %d\n", ret);
- dev_info(dev, "NXP i.MX SCU Initialized\n");
- return devm_of_platform_populate(dev);
- }
- static const struct of_device_id imx_scu_match[] = {
- { .compatible = "fsl,imx-scu", },
- { /* Sentinel */ }
- };
- static struct platform_driver imx_scu_driver = {
- .driver = {
- .name = "imx-scu",
- .of_match_table = imx_scu_match,
- },
- .probe = imx_scu_probe,
- };
- builtin_platform_driver(imx_scu_driver);
- MODULE_AUTHOR("Dong Aisheng <[email protected]>");
- MODULE_DESCRIPTION("IMX SCU firmware protocol driver");
- MODULE_LICENSE("GPL v2");
|