123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394 |
- // SPDX-License-Identifier: (GPL-2.0+ or MIT)
- /*
- * Copyright (c) 2020 Yangtao Li <[email protected]>
- */
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/sun50i-a100-ccu.h>
- #include <dt-bindings/clock/sun50i-a100-r-ccu.h>
- #include <dt-bindings/reset/sun50i-a100-ccu.h>
- #include <dt-bindings/reset/sun50i-a100-r-ccu.h>
- / {
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- cpu0: cpu@0 {
- compatible = "arm,cortex-a53";
- device_type = "cpu";
- reg = <0x0>;
- enable-method = "psci";
- };
- cpu@1 {
- compatible = "arm,cortex-a53";
- device_type = "cpu";
- reg = <0x1>;
- enable-method = "psci";
- };
- cpu@2 {
- compatible = "arm,cortex-a53";
- device_type = "cpu";
- reg = <0x2>;
- enable-method = "psci";
- };
- cpu@3 {
- compatible = "arm,cortex-a53";
- device_type = "cpu";
- reg = <0x3>;
- enable-method = "psci";
- };
- };
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
- dcxo24M: dcxo24M-clk {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "dcxo24M";
- #clock-cells = <0>;
- };
- iosc: internal-osc-clk {
- compatible = "fixed-clock";
- clock-frequency = <16000000>;
- clock-accuracy = <300000000>;
- clock-output-names = "iosc";
- #clock-cells = <0>;
- };
- osc32k: osc32k-clk {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
- #clock-cells = <0>;
- };
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0x3fffffff>;
- ccu: clock@3001000 {
- compatible = "allwinner,sun50i-a100-ccu";
- reg = <0x03001000 0x1000>;
- clocks = <&dcxo24M>, <&osc32k>, <&iosc>;
- clock-names = "hosc", "losc", "iosc";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
- dma: dma-controller@3002000 {
- compatible = "allwinner,sun50i-a100-dma";
- reg = <0x03002000 0x1000>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
- clock-names = "bus", "mbus";
- resets = <&ccu RST_BUS_DMA>;
- dma-channels = <8>;
- dma-requests = <52>;
- #dma-cells = <1>;
- };
- gic: interrupt-controller@3021000 {
- compatible = "arm,gic-400";
- reg = <0x03021000 0x1000>, <0x03022000 0x2000>,
- <0x03024000 0x2000>, <0x03026000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_HIGH)>;
- interrupt-controller;
- #interrupt-cells = <3>;
- };
- efuse@3006000 {
- compatible = "allwinner,sun50i-a100-sid",
- "allwinner,sun50i-a64-sid";
- reg = <0x03006000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ths_calibration: calib@14 {
- reg = <0x14 8>;
- };
- };
- pio: pinctrl@300b000 {
- compatible = "allwinner,sun50i-a100-pinctrl";
- reg = <0x0300b000 0x400>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_APB1>, <&dcxo24M>, <&osc32k>;
- clock-names = "apb", "hosc", "losc";
- gpio-controller;
- #gpio-cells = <3>;
- interrupt-controller;
- #interrupt-cells = <3>;
- uart0_pb_pins: uart0-pb-pins {
- pins = "PB9", "PB10";
- function = "uart0";
- };
- };
- uart0: serial@5000000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x05000000 0x400>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART0>;
- resets = <&ccu RST_BUS_UART0>;
- status = "disabled";
- };
- uart1: serial@5000400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x05000400 0x400>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART1>;
- resets = <&ccu RST_BUS_UART1>;
- status = "disabled";
- };
- uart2: serial@5000800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x05000800 0x400>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART2>;
- resets = <&ccu RST_BUS_UART2>;
- status = "disabled";
- };
- uart3: serial@5000c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x05000c00 0x400>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART3>;
- resets = <&ccu RST_BUS_UART3>;
- status = "disabled";
- };
- uart4: serial@5001000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x05001000 0x400>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART4>;
- resets = <&ccu RST_BUS_UART4>;
- status = "disabled";
- };
- i2c0: i2c@5002000 {
- compatible = "allwinner,sun50i-a100-i2c",
- "allwinner,sun8i-v536-i2c",
- "allwinner,sun6i-a31-i2c";
- reg = <0x05002000 0x400>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C0>;
- resets = <&ccu RST_BUS_I2C0>;
- dmas = <&dma 43>, <&dma 43>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- i2c1: i2c@5002400 {
- compatible = "allwinner,sun50i-a100-i2c",
- "allwinner,sun8i-v536-i2c",
- "allwinner,sun6i-a31-i2c";
- reg = <0x05002400 0x400>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C1>;
- resets = <&ccu RST_BUS_I2C1>;
- dmas = <&dma 44>, <&dma 44>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- i2c2: i2c@5002800 {
- compatible = "allwinner,sun50i-a100-i2c",
- "allwinner,sun8i-v536-i2c",
- "allwinner,sun6i-a31-i2c";
- reg = <0x05002800 0x400>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C2>;
- resets = <&ccu RST_BUS_I2C2>;
- dmas = <&dma 45>, <&dma 45>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- i2c3: i2c@5002c00 {
- compatible = "allwinner,sun50i-a100-i2c",
- "allwinner,sun8i-v536-i2c",
- "allwinner,sun6i-a31-i2c";
- reg = <0x05002c00 0x400>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C3>;
- resets = <&ccu RST_BUS_I2C3>;
- dmas = <&dma 46>, <&dma 46>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- ths: thermal-sensor@5070400 {
- compatible = "allwinner,sun50i-a100-ths";
- reg = <0x05070400 0x100>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_THS>;
- clock-names = "bus";
- resets = <&ccu RST_BUS_THS>;
- nvmem-cells = <&ths_calibration>;
- nvmem-cell-names = "calibration";
- #thermal-sensor-cells = <1>;
- };
- r_ccu: clock@7010000 {
- compatible = "allwinner,sun50i-a100-r-ccu";
- reg = <0x07010000 0x300>;
- clocks = <&dcxo24M>, <&osc32k>, <&iosc>,
- <&ccu CLK_PLL_PERIPH0>;
- clock-names = "hosc", "losc", "iosc", "pll-periph";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
- r_intc: interrupt-controller@7010320 {
- compatible = "allwinner,sun50i-a100-nmi",
- "allwinner,sun9i-a80-nmi";
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x07010320 0xc>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- };
- r_pio: pinctrl@7022000 {
- compatible = "allwinner,sun50i-a100-r-pinctrl";
- reg = <0x07022000 0x400>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB1>, <&dcxo24M>, <&osc32k>;
- clock-names = "apb", "hosc", "losc";
- gpio-controller;
- #gpio-cells = <3>;
- interrupt-controller;
- #interrupt-cells = <3>;
- r_i2c0_pins: r-i2c0-pins {
- pins = "PL0", "PL1";
- function = "s_i2c0";
- };
- r_i2c1_pins: r-i2c1-pins {
- pins = "PL8", "PL9";
- function = "s_i2c1";
- };
- };
- r_uart: serial@7080000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x07080000 0x400>;
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&r_ccu CLK_R_APB2_UART>;
- resets = <&r_ccu RST_R_APB2_UART>;
- status = "disabled";
- };
- r_i2c0: i2c@7081400 {
- compatible = "allwinner,sun50i-a100-i2c",
- "allwinner,sun8i-v536-i2c",
- "allwinner,sun6i-a31-i2c";
- reg = <0x07081400 0x400>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB2_I2C0>;
- resets = <&r_ccu RST_R_APB2_I2C0>;
- dmas = <&dma 50>, <&dma 50>;
- dma-names = "rx", "tx";
- pinctrl-names = "default";
- pinctrl-0 = <&r_i2c0_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- r_i2c1: i2c@7081800 {
- compatible = "allwinner,sun50i-a100-i2c",
- "allwinner,sun8i-v536-i2c",
- "allwinner,sun6i-a31-i2c";
- reg = <0x07081800 0x400>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB2_I2C1>;
- resets = <&r_ccu RST_R_APB2_I2C1>;
- dmas = <&dma 51>, <&dma 51>;
- dma-names = "rx", "tx";
- pinctrl-names = "default";
- pinctrl-0 = <&r_i2c1_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
- thermal-zones {
- cpu-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&ths 0>;
- };
- ddr-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&ths 2>;
- };
- gpu-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&ths 1>;
- };
- };
- };
|