android_kernel_samsung_sm8650_ksu/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts

// SPDX-License-Identifier: GPL-2.0
#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>

/ {
	model = "Sony Xperia Z";
	compatible = "sony,xperia-yuga", "qcom,apq8064";

	aliases {
		serial0 = &gsbi5_serial;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	gpio-keys {
		compatible = "gpio-keys";

		pinctrl-names = "default";
		pinctrl-0 = <&gpio_keys_pin_a>;

		key-camera-focus {
			label = "camera_focus";
			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_CAMERA_FOCUS>;
		};

		key-camera-snapshot {
			label = "camera_snapshot";
			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_CAMERA>;
		};

		key-volume-down {
			label = "volume_down";
			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_VOLUMEDOWN>;
		};

		key-volume-up {
			label = "volume_up";
			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_VOLUMEUP>;
		};
	};

	soc {
		pinctrl@800000 {
			gsbi5_uart_pin_a: gsbi5-uart-pin-active {
				rx {
					pins = "gpio52";
					function = "gsbi5";
					drive-strength = <2>;
					bias-pull-up;
				};

				tx {
					pins = "gpio51";
					function = "gsbi5";
					drive-strength = <4>;
					bias-disable;
				};
			};


			sdcc3_cd_pin_a: sdcc3-cd-pin-active {
				pins = "gpio26";
				function = "gpio";

				drive-strength = <2>;
				bias-disable;
			};
		};


		rpm@108000 {
			regulators {
				vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
				vin_lvs_1_3_6-supply = <&pm8921_s4>;
				vin_lvs_4_5_7-supply = <&pm8921_s4>;
				vin_ncp-supply = <&pm8921_l6>;
				vin_lvs2-supply = <&pm8921_s4>;
				vin_l24-supply = <&pm8921_s1>;
				vin_l25-supply = <&pm8921_s1>;
				vin_l27-supply = <&pm8921_s7>;
				vin_l28-supply = <&pm8921_s7>;

				/* Buck SMPS */
				s1 {
					regulator-always-on;
					regulator-min-microvolt = <1225000>;
					regulator-max-microvolt = <1225000>;
					qcom,switch-mode-frequency = <3200000>;
					bias-pull-down;
				};

				s2 {
					regulator-min-microvolt = <1300000>;
					regulator-max-microvolt = <1300000>;
					qcom,switch-mode-frequency = <1600000>;
					bias-pull-down;
				};

				s3 {
					regulator-min-microvolt = <500000>;
					regulator-max-microvolt = <1150000>;
					qcom,switch-mode-frequency = <4800000>;
					bias-pull-down;
				};

				s4 {
					regulator-always-on;
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					qcom,switch-mode-frequency = <1600000>;
					bias-pull-down;
					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
				};

				s7 {
					regulator-min-microvolt = <1300000>;
					regulator-max-microvolt = <1300000>;
					qcom,switch-mode-frequency = <3200000>;
				};

				s8 {
					regulator-min-microvolt = <2200000>;
					regulator-max-microvolt = <2200000>;
					qcom,switch-mode-frequency = <1600000>;
				};

				/* PMOS LDO */
				l1 {
					regulator-always-on;
					regulator-min-microvolt = <1100000>;
					regulator-max-microvolt = <1100000>;
					bias-pull-down;
				};

				l2 {
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					bias-pull-down;
				};

				l3 {
					regulator-min-microvolt = <3075000>;
					regulator-max-microvolt = <3075000>;
					bias-pull-down;
				};

				l4 {
					regulator-always-on;
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					bias-pull-down;
				};

				l5 {
					regulator-min-microvolt = <2950000>;
					regulator-max-microvolt = <2950000>;
					bias-pull-down;
				};

				l6 {
					regulator-min-microvolt = <2950000>;
					regulator-max-microvolt = <2950000>;
					bias-pull-down;
				};

				l7 {
					regulator-min-microvolt = <1850000>;
					regulator-max-microvolt = <2950000>;
					bias-pull-down;
				};

				l8 {
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
					bias-pull-down;
				};

				l9 {
					regulator-min-microvolt = <3000000>;
					regulator-max-microvolt = <3000000>;
					bias-pull-down;
				};

				l10 {
					regulator-min-microvolt = <2900000>;
					regulator-max-microvolt = <2900000>;
					bias-pull-down;
				};

				l11 {
					regulator-min-microvolt = <3000000>;
					regulator-max-microvolt = <3000000>;
					bias-pull-down;
				};

				l12 {
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					bias-pull-down;
				};

				l14 {
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					bias-pull-down;
				};

				l15 {
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <2950000>;
					bias-pull-down;
				};

				l16 {
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
					bias-pull-down;
				};

				l17 {
					regulator-min-microvolt = <2000000>;
					regulator-max-microvolt = <2000000>;
					bias-pull-down;
				};

				l18 {
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					bias-pull-down;
				};

				l21 {
					regulator-min-microvolt = <1050000>;
					regulator-max-microvolt = <1050000>;
					bias-pull-down;
				};

				l22 {
					regulator-min-microvolt = <2600000>;
					regulator-max-microvolt = <2600000>;
					bias-pull-down;
				};

				l23 {
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					bias-pull-down;
				};

				l24 {
					regulator-min-microvolt = <750000>;
					regulator-max-microvolt = <1150000>;
					bias-pull-down;
				};

				l25 {
					regulator-always-on;
					regulator-min-microvolt = <1250000>;
					regulator-max-microvolt = <1250000>;
					bias-pull-down;
				};

				l27 {
					regulator-min-microvolt = <1100000>;
					regulator-max-microvolt = <1100000>;
				};

				l28 {
					regulator-min-microvolt = <1050000>;
					regulator-max-microvolt = <1050000>;
					bias-pull-down;
				};

				l29 {
					regulator-min-microvolt = <2000000>;
					regulator-max-microvolt = <2000000>;
					bias-pull-down;
				};

				/* Low Voltage Switch */
				lvs1 {
					bias-pull-down;
				};

				lvs2 {
					bias-pull-down;
				};

				lvs3 {
					bias-pull-down;
				};

				lvs4 {
					bias-pull-down;
				};

				lvs5 {
					bias-pull-down;
				};

				lvs6 {
					bias-pull-down;
				};

				lvs7 {
					bias-pull-down;
				};

				usb-switch {};

				hdmi-switch {};

				ncp {
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					qcom,switch-mode-frequency = <1600000>;
				};
			};
		};

		qcom,ssbi@500000 {
			pmic@0 {
				gpio@150 {
					gpio_keys_pin_a: gpio-keys-active-state {
						pins = "gpio3", "gpio4", "gpio29", "gpio35";
						function = "normal";

						bias-pull-up;
						drive-push-pull;
						input-enable;
						power-source = <2>;
						qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
						qcom,pull-up-strength = <0>;
					};
				};
			};
		};

		usb@12500000 {
			status = "okay";
			dr_mode = "otg";
			ulpi {
				phy {
					v3p3-supply = <&pm8921_l3>;
					v1p8-supply = <&pm8921_l4>;
				};
			};
		};

		gsbi@1a200000 {
			status = "okay";
			qcom,mode = <GSBI_PROT_I2C_UART>;

			serial@1a240000 {
				status = "okay";

				pinctrl-names = "default";
				pinctrl-0 = <&gsbi5_uart_pin_a>;
			};
		};

		amba {
			sdcc1: mmc@12400000 {
				status = "okay";

				vmmc-supply = <&pm8921_l5>;
				vqmmc-supply = <&pm8921_s4>;
			};

			sdcc3: mmc@12180000 {
				status = "okay";

				vmmc-supply = <&pm8921_l6>;
				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;

				pinctrl-names = "default";
				pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
			};
		};

		riva-pil@3204000 {
			status = "okay";

			pinctrl-names = "default";
			pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
		};
	};
};