123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217 |
- /* SPDX-License-Identifier: GPL-2.0-only */
- /* include/linux/amba/pl080.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <[email protected]>
- *
- * ARM PrimeCell PL080 DMA controller
- */
- /* Note, there are some Samsung updates to this controller block which
- * make it not entierly compatible with the PL080 specification from
- * ARM. When in doubt, check the Samsung documentation first.
- *
- * The Samsung defines are PL080S, and add an extra control register,
- * the ability to move more than 2^11 counts of data and some extra
- * OneNAND features.
- */
- #ifndef ASM_PL080_H
- #define ASM_PL080_H
- #define PL080_INT_STATUS (0x00)
- #define PL080_TC_STATUS (0x04)
- #define PL080_TC_CLEAR (0x08)
- #define PL080_ERR_STATUS (0x0C)
- #define PL080_ERR_CLEAR (0x10)
- #define PL080_RAW_TC_STATUS (0x14)
- #define PL080_RAW_ERR_STATUS (0x18)
- #define PL080_EN_CHAN (0x1c)
- #define PL080_SOFT_BREQ (0x20)
- #define PL080_SOFT_SREQ (0x24)
- #define PL080_SOFT_LBREQ (0x28)
- #define PL080_SOFT_LSREQ (0x2C)
- #define PL080_CONFIG (0x30)
- #define PL080_CONFIG_M2_BE BIT(2)
- #define PL080_CONFIG_M1_BE BIT(1)
- #define PL080_CONFIG_ENABLE BIT(0)
- #define PL080_SYNC (0x34)
- /* The Faraday Technology FTDMAC020 variant registers */
- #define FTDMAC020_CH_BUSY (0x20)
- /* Identical to PL080_CONFIG */
- #define FTDMAC020_CSR (0x24)
- /* Identical to PL080_SYNC */
- #define FTDMAC020_SYNC (0x2C)
- #define FTDMAC020_REVISION (0x30)
- #define FTDMAC020_FEATURE (0x34)
- /* Per channel configuration registers */
- #define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
- #define PL080_CH_SRC_ADDR (0x00)
- #define PL080_CH_DST_ADDR (0x04)
- #define PL080_CH_LLI (0x08)
- #define PL080_CH_CONTROL (0x0C)
- #define PL080_CH_CONFIG (0x10)
- #define PL080S_CH_CONTROL2 (0x10)
- #define PL080S_CH_CONFIG (0x14)
- /* The Faraday FTDMAC020 derivative shuffles the registers around */
- #define FTDMAC020_CH_CSR (0x00)
- #define FTDMAC020_CH_CFG (0x04)
- #define FTDMAC020_CH_SRC_ADDR (0x08)
- #define FTDMAC020_CH_DST_ADDR (0x0C)
- #define FTDMAC020_CH_LLP (0x10)
- #define FTDMAC020_CH_SIZE (0x14)
- #define PL080_LLI_ADDR_MASK GENMASK(31, 2)
- #define PL080_LLI_ADDR_SHIFT (2)
- #define PL080_LLI_LM_AHB2 BIT(0)
- #define PL080_CONTROL_TC_IRQ_EN BIT(31)
- #define PL080_CONTROL_PROT_MASK GENMASK(30, 28)
- #define PL080_CONTROL_PROT_SHIFT (28)
- #define PL080_CONTROL_PROT_CACHE BIT(30)
- #define PL080_CONTROL_PROT_BUFF BIT(29)
- #define PL080_CONTROL_PROT_SYS BIT(28)
- #define PL080_CONTROL_DST_INCR BIT(27)
- #define PL080_CONTROL_SRC_INCR BIT(26)
- #define PL080_CONTROL_DST_AHB2 BIT(25)
- #define PL080_CONTROL_SRC_AHB2 BIT(24)
- #define PL080_CONTROL_DWIDTH_MASK GENMASK(23, 21)
- #define PL080_CONTROL_DWIDTH_SHIFT (21)
- #define PL080_CONTROL_SWIDTH_MASK GENMASK(20, 18)
- #define PL080_CONTROL_SWIDTH_SHIFT (18)
- #define PL080_CONTROL_DB_SIZE_MASK GENMASK(17, 15)
- #define PL080_CONTROL_DB_SIZE_SHIFT (15)
- #define PL080_CONTROL_SB_SIZE_MASK GENMASK(14, 12)
- #define PL080_CONTROL_SB_SIZE_SHIFT (12)
- #define PL080_CONTROL_TRANSFER_SIZE_MASK GENMASK(11, 0)
- #define PL080S_CONTROL_TRANSFER_SIZE_MASK GENMASK(24, 0)
- #define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0)
- #define PL080_BSIZE_1 (0x0)
- #define PL080_BSIZE_4 (0x1)
- #define PL080_BSIZE_8 (0x2)
- #define PL080_BSIZE_16 (0x3)
- #define PL080_BSIZE_32 (0x4)
- #define PL080_BSIZE_64 (0x5)
- #define PL080_BSIZE_128 (0x6)
- #define PL080_BSIZE_256 (0x7)
- #define PL080_WIDTH_8BIT (0x0)
- #define PL080_WIDTH_16BIT (0x1)
- #define PL080_WIDTH_32BIT (0x2)
- #define PL080N_CONFIG_ITPROT BIT(20)
- #define PL080N_CONFIG_SECPROT BIT(19)
- #define PL080_CONFIG_HALT BIT(18)
- #define PL080_CONFIG_ACTIVE BIT(17) /* RO */
- #define PL080_CONFIG_LOCK BIT(16)
- #define PL080_CONFIG_TC_IRQ_MASK BIT(15)
- #define PL080_CONFIG_ERR_IRQ_MASK BIT(14)
- #define PL080_CONFIG_FLOW_CONTROL_MASK GENMASK(13, 11)
- #define PL080_CONFIG_FLOW_CONTROL_SHIFT (11)
- #define PL080_CONFIG_DST_SEL_MASK GENMASK(9, 6)
- #define PL080_CONFIG_DST_SEL_SHIFT (6)
- #define PL080_CONFIG_SRC_SEL_MASK GENMASK(4, 1)
- #define PL080_CONFIG_SRC_SEL_SHIFT (1)
- #define PL080_CONFIG_ENABLE BIT(0)
- #define PL080_FLOW_MEM2MEM (0x0)
- #define PL080_FLOW_MEM2PER (0x1)
- #define PL080_FLOW_PER2MEM (0x2)
- #define PL080_FLOW_SRC2DST (0x3)
- #define PL080_FLOW_SRC2DST_DST (0x4)
- #define PL080_FLOW_MEM2PER_PER (0x5)
- #define PL080_FLOW_PER2MEM_PER (0x6)
- #define PL080_FLOW_SRC2DST_SRC (0x7)
- #define FTDMAC020_CH_CSR_TC_MSK BIT(31)
- /* Later versions have a threshold in bits 24..26, */
- #define FTDMAC020_CH_CSR_FIFOTH_MSK GENMASK(26, 24)
- #define FTDMAC020_CH_CSR_FIFOTH_SHIFT (24)
- #define FTDMAC020_CH_CSR_CHPR1_MSK GENMASK(23, 22)
- #define FTDMAC020_CH_CSR_PROT3 BIT(21)
- #define FTDMAC020_CH_CSR_PROT2 BIT(20)
- #define FTDMAC020_CH_CSR_PROT1 BIT(19)
- #define FTDMAC020_CH_CSR_SRC_SIZE_MSK GENMASK(18, 16)
- #define FTDMAC020_CH_CSR_SRC_SIZE_SHIFT (16)
- #define FTDMAC020_CH_CSR_ABT BIT(15)
- #define FTDMAC020_CH_CSR_SRC_WIDTH_MSK GENMASK(13, 11)
- #define FTDMAC020_CH_CSR_SRC_WIDTH_SHIFT (11)
- #define FTDMAC020_CH_CSR_DST_WIDTH_MSK GENMASK(10, 8)
- #define FTDMAC020_CH_CSR_DST_WIDTH_SHIFT (8)
- #define FTDMAC020_CH_CSR_MODE BIT(7)
- /* 00 = increase, 01 = decrease, 10 = fix */
- #define FTDMAC020_CH_CSR_SRCAD_CTL_MSK GENMASK(6, 5)
- #define FTDMAC020_CH_CSR_SRCAD_CTL_SHIFT (5)
- #define FTDMAC020_CH_CSR_DSTAD_CTL_MSK GENMASK(4, 3)
- #define FTDMAC020_CH_CSR_DSTAD_CTL_SHIFT (3)
- #define FTDMAC020_CH_CSR_SRC_SEL BIT(2)
- #define FTDMAC020_CH_CSR_DST_SEL BIT(1)
- #define FTDMAC020_CH_CSR_EN BIT(0)
- /* FIFO threshold setting */
- #define FTDMAC020_CH_CSR_FIFOTH_1 (0x0)
- #define FTDMAC020_CH_CSR_FIFOTH_2 (0x1)
- #define FTDMAC020_CH_CSR_FIFOTH_4 (0x2)
- #define FTDMAC020_CH_CSR_FIFOTH_8 (0x3)
- #define FTDMAC020_CH_CSR_FIFOTH_16 (0x4)
- /* The FTDMAC020 supports 64bit wide transfers */
- #define FTDMAC020_WIDTH_64BIT (0x3)
- /* Address can be increased, decreased or fixed */
- #define FTDMAC020_CH_CSR_SRCAD_CTL_INC (0x0)
- #define FTDMAC020_CH_CSR_SRCAD_CTL_DEC (0x1)
- #define FTDMAC020_CH_CSR_SRCAD_CTL_FIXED (0x2)
- #define FTDMAC020_CH_CFG_LLP_CNT_MASK GENMASK(19, 16)
- #define FTDMAC020_CH_CFG_LLP_CNT_SHIFT (16)
- #define FTDMAC020_CH_CFG_BUSY BIT(8)
- #define FTDMAC020_CH_CFG_INT_ABT_MASK BIT(2)
- #define FTDMAC020_CH_CFG_INT_ERR_MASK BIT(1)
- #define FTDMAC020_CH_CFG_INT_TC_MASK BIT(0)
- /* Inside the LLIs, the applicable CSR fields are mapped differently */
- #define FTDMAC020_LLI_TC_MSK BIT(28)
- #define FTDMAC020_LLI_SRC_WIDTH_MSK GENMASK(27, 25)
- #define FTDMAC020_LLI_SRC_WIDTH_SHIFT (25)
- #define FTDMAC020_LLI_DST_WIDTH_MSK GENMASK(24, 22)
- #define FTDMAC020_LLI_DST_WIDTH_SHIFT (22)
- #define FTDMAC020_LLI_SRCAD_CTL_MSK GENMASK(21, 20)
- #define FTDMAC020_LLI_SRCAD_CTL_SHIFT (20)
- #define FTDMAC020_LLI_DSTAD_CTL_MSK GENMASK(19, 18)
- #define FTDMAC020_LLI_DSTAD_CTL_SHIFT (18)
- #define FTDMAC020_LLI_SRC_SEL BIT(17)
- #define FTDMAC020_LLI_DST_SEL BIT(16)
- #define FTDMAC020_LLI_TRANSFER_SIZE_MASK GENMASK(11, 0)
- #define FTDMAC020_LLI_TRANSFER_SIZE_SHIFT (0)
- #define FTDMAC020_CFG_LLP_CNT_MASK GENMASK(19, 16)
- #define FTDMAC020_CFG_LLP_CNT_SHIFT (16)
- #define FTDMAC020_CFG_BUSY BIT(8)
- #define FTDMAC020_CFG_INT_ABT_MSK BIT(2)
- #define FTDMAC020_CFG_INT_ERR_MSK BIT(1)
- #define FTDMAC020_CFG_INT_TC_MSK BIT(0)
- /* DMA linked list chain structure */
- struct pl080_lli {
- u32 src_addr;
- u32 dst_addr;
- u32 next_lli;
- u32 control0;
- };
- struct pl080s_lli {
- u32 src_addr;
- u32 dst_addr;
- u32 next_lli;
- u32 control0;
- u32 control1;
- };
- #endif /* ASM_PL080_H */
|