123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393 |
- // SPDX-License-Identifier: GPL-2.0-only
- /*
- * TI Touch Screen / ADC MFD driver
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
- #include <linux/module.h>
- #include <linux/slab.h>
- #include <linux/err.h>
- #include <linux/io.h>
- #include <linux/clk.h>
- #include <linux/regmap.h>
- #include <linux/mfd/core.h>
- #include <linux/pm_runtime.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/sched.h>
- #include <linux/mfd/ti_am335x_tscadc.h>
- static const struct regmap_config tscadc_regmap_config = {
- .name = "ti_tscadc",
- .reg_bits = 32,
- .reg_stride = 4,
- .val_bits = 32,
- };
- void am335x_tsc_se_set_cache(struct ti_tscadc_dev *tscadc, u32 val)
- {
- unsigned long flags;
- spin_lock_irqsave(&tscadc->reg_lock, flags);
- tscadc->reg_se_cache |= val;
- if (tscadc->adc_waiting)
- wake_up(&tscadc->reg_se_wait);
- else if (!tscadc->adc_in_use)
- regmap_write(tscadc->regmap, REG_SE, tscadc->reg_se_cache);
- spin_unlock_irqrestore(&tscadc->reg_lock, flags);
- }
- EXPORT_SYMBOL_GPL(am335x_tsc_se_set_cache);
- static void am335x_tscadc_need_adc(struct ti_tscadc_dev *tscadc)
- {
- DEFINE_WAIT(wait);
- u32 reg;
- regmap_read(tscadc->regmap, REG_ADCFSM, ®);
- if (reg & SEQ_STATUS) {
- tscadc->adc_waiting = true;
- prepare_to_wait(&tscadc->reg_se_wait, &wait,
- TASK_UNINTERRUPTIBLE);
- spin_unlock_irq(&tscadc->reg_lock);
- schedule();
- spin_lock_irq(&tscadc->reg_lock);
- finish_wait(&tscadc->reg_se_wait, &wait);
- /*
- * Sequencer should either be idle or
- * busy applying the charge step.
- */
- regmap_read(tscadc->regmap, REG_ADCFSM, ®);
- WARN_ON((reg & SEQ_STATUS) && !(reg & CHARGE_STEP));
- tscadc->adc_waiting = false;
- }
- tscadc->adc_in_use = true;
- }
- void am335x_tsc_se_set_once(struct ti_tscadc_dev *tscadc, u32 val)
- {
- spin_lock_irq(&tscadc->reg_lock);
- am335x_tscadc_need_adc(tscadc);
- regmap_write(tscadc->regmap, REG_SE, val);
- spin_unlock_irq(&tscadc->reg_lock);
- }
- EXPORT_SYMBOL_GPL(am335x_tsc_se_set_once);
- void am335x_tsc_se_adc_done(struct ti_tscadc_dev *tscadc)
- {
- unsigned long flags;
- spin_lock_irqsave(&tscadc->reg_lock, flags);
- tscadc->adc_in_use = false;
- regmap_write(tscadc->regmap, REG_SE, tscadc->reg_se_cache);
- spin_unlock_irqrestore(&tscadc->reg_lock, flags);
- }
- EXPORT_SYMBOL_GPL(am335x_tsc_se_adc_done);
- void am335x_tsc_se_clr(struct ti_tscadc_dev *tscadc, u32 val)
- {
- unsigned long flags;
- spin_lock_irqsave(&tscadc->reg_lock, flags);
- tscadc->reg_se_cache &= ~val;
- regmap_write(tscadc->regmap, REG_SE, tscadc->reg_se_cache);
- spin_unlock_irqrestore(&tscadc->reg_lock, flags);
- }
- EXPORT_SYMBOL_GPL(am335x_tsc_se_clr);
- static void tscadc_idle_config(struct ti_tscadc_dev *tscadc)
- {
- unsigned int idleconfig;
- idleconfig = STEPCONFIG_INM_ADCREFM | STEPCONFIG_INP_ADCREFM;
- if (ti_adc_with_touchscreen(tscadc))
- idleconfig |= STEPCONFIG_YNN | STEPCONFIG_YPN;
- regmap_write(tscadc->regmap, REG_IDLECONFIG, idleconfig);
- }
- static int ti_tscadc_probe(struct platform_device *pdev)
- {
- struct ti_tscadc_dev *tscadc;
- struct resource *res;
- struct clk *clk;
- struct device_node *node;
- struct mfd_cell *cell;
- struct property *prop;
- const __be32 *cur;
- bool use_tsc = false, use_mag = false;
- u32 val;
- int err;
- int tscmag_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
- int readouts = 0, mag_tracks = 0;
- /* Allocate memory for device */
- tscadc = devm_kzalloc(&pdev->dev, sizeof(*tscadc), GFP_KERNEL);
- if (!tscadc)
- return -ENOMEM;
- tscadc->dev = &pdev->dev;
- if (!pdev->dev.of_node) {
- dev_err(&pdev->dev, "Could not find valid DT data.\n");
- return -EINVAL;
- }
- tscadc->data = of_device_get_match_data(&pdev->dev);
- if (ti_adc_with_touchscreen(tscadc)) {
- node = of_get_child_by_name(pdev->dev.of_node, "tsc");
- of_property_read_u32(node, "ti,wires", &tscmag_wires);
- err = of_property_read_u32(node, "ti,coordinate-readouts",
- &readouts);
- if (err < 0)
- of_property_read_u32(node, "ti,coordiante-readouts",
- &readouts);
- of_node_put(node);
- if (tscmag_wires)
- use_tsc = true;
- } else {
- /*
- * When adding support for the magnetic stripe reader, here is
- * the place to look for the number of tracks used from device
- * tree. Let's default to 0 for now.
- */
- mag_tracks = 0;
- tscmag_wires = mag_tracks * 2;
- if (tscmag_wires)
- use_mag = true;
- }
- node = of_get_child_by_name(pdev->dev.of_node, "adc");
- of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
- adc_channels++;
- if (val > 7) {
- dev_err(&pdev->dev, " PIN numbers are 0..7 (not %d)\n",
- val);
- of_node_put(node);
- return -EINVAL;
- }
- }
- of_node_put(node);
- total_channels = tscmag_wires + adc_channels;
- if (total_channels > 8) {
- dev_err(&pdev->dev, "Number of i/p channels more than 8\n");
- return -EINVAL;
- }
- if (total_channels == 0) {
- dev_err(&pdev->dev, "Need at least one channel.\n");
- return -EINVAL;
- }
- if (use_tsc && (readouts * 2 + 2 + adc_channels > 16)) {
- dev_err(&pdev->dev, "Too many step configurations requested\n");
- return -EINVAL;
- }
- err = platform_get_irq(pdev, 0);
- if (err < 0)
- return err;
- else
- tscadc->irq = err;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- tscadc->tscadc_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(tscadc->tscadc_base))
- return PTR_ERR(tscadc->tscadc_base);
- tscadc->tscadc_phys_base = res->start;
- tscadc->regmap = devm_regmap_init_mmio(&pdev->dev,
- tscadc->tscadc_base,
- &tscadc_regmap_config);
- if (IS_ERR(tscadc->regmap)) {
- dev_err(&pdev->dev, "regmap init failed\n");
- return PTR_ERR(tscadc->regmap);
- }
- spin_lock_init(&tscadc->reg_lock);
- init_waitqueue_head(&tscadc->reg_se_wait);
- pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
- /*
- * The TSC_ADC_Subsystem has 2 clock domains: OCP_CLK and ADC_CLK.
- * ADCs produce a 12-bit sample every 15 ADC_CLK cycles.
- * am33xx ADCs expect to capture 200ksps.
- * am47xx ADCs expect to capture 867ksps.
- * We need ADC clocks respectively running at 3MHz and 13MHz.
- * These frequencies are valid since TSC_ADC_SS controller design
- * assumes the OCP clock is at least 6x faster than the ADC clock.
- */
- clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "failed to get fck\n");
- err = PTR_ERR(clk);
- goto err_disable_clk;
- }
- tscadc->clk_div = (clk_get_rate(clk) / tscadc->data->target_clk_rate) - 1;
- regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
- /*
- * Set the control register bits. tscadc->ctrl stores the configuration
- * of the CTRL register but not the subsystem enable bit which must be
- * added manually when timely.
- */
- tscadc->ctrl = CNTRLREG_STEPID;
- if (ti_adc_with_touchscreen(tscadc)) {
- tscadc->ctrl |= CNTRLREG_TSC_STEPCONFIGWRT;
- if (use_tsc) {
- tscadc->ctrl |= CNTRLREG_TSC_ENB;
- if (tscmag_wires == 5)
- tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
- else
- tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
- }
- } else {
- tscadc->ctrl |= CNTRLREG_MAG_PREAMP_PWRDOWN |
- CNTRLREG_MAG_PREAMP_BYPASS;
- }
- regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
- tscadc_idle_config(tscadc);
- /* Enable the TSC module enable bit */
- regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB);
- /* TSC or MAG Cell */
- if (use_tsc || use_mag) {
- cell = &tscadc->cells[cell_idx++];
- cell->name = tscadc->data->secondary_feature_name;
- cell->of_compatible = tscadc->data->secondary_feature_compatible;
- cell->platform_data = &tscadc;
- cell->pdata_size = sizeof(tscadc);
- }
- /* ADC Cell */
- if (adc_channels > 0) {
- cell = &tscadc->cells[cell_idx++];
- cell->name = tscadc->data->adc_feature_name;
- cell->of_compatible = tscadc->data->adc_feature_compatible;
- cell->platform_data = &tscadc;
- cell->pdata_size = sizeof(tscadc);
- }
- err = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
- tscadc->cells, cell_idx, NULL, 0, NULL);
- if (err < 0)
- goto err_disable_clk;
- platform_set_drvdata(pdev, tscadc);
- return 0;
- err_disable_clk:
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
- return err;
- }
- static int ti_tscadc_remove(struct platform_device *pdev)
- {
- struct ti_tscadc_dev *tscadc = platform_get_drvdata(pdev);
- regmap_write(tscadc->regmap, REG_SE, 0x00);
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
- mfd_remove_devices(tscadc->dev);
- return 0;
- }
- static int __maybe_unused ti_tscadc_can_wakeup(struct device *dev, void *data)
- {
- return device_may_wakeup(dev);
- }
- static int __maybe_unused tscadc_suspend(struct device *dev)
- {
- struct ti_tscadc_dev *tscadc = dev_get_drvdata(dev);
- regmap_write(tscadc->regmap, REG_SE, 0x00);
- if (device_for_each_child(dev, NULL, ti_tscadc_can_wakeup)) {
- u32 ctrl;
- regmap_read(tscadc->regmap, REG_CTRL, &ctrl);
- ctrl &= ~(CNTRLREG_POWERDOWN);
- ctrl |= CNTRLREG_SSENB;
- regmap_write(tscadc->regmap, REG_CTRL, ctrl);
- }
- pm_runtime_put_sync(dev);
- return 0;
- }
- static int __maybe_unused tscadc_resume(struct device *dev)
- {
- struct ti_tscadc_dev *tscadc = dev_get_drvdata(dev);
- pm_runtime_get_sync(dev);
- regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
- regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
- tscadc_idle_config(tscadc);
- regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB);
- return 0;
- }
- static SIMPLE_DEV_PM_OPS(tscadc_pm_ops, tscadc_suspend, tscadc_resume);
- static const struct ti_tscadc_data tscdata = {
- .adc_feature_name = "TI-am335x-adc",
- .adc_feature_compatible = "ti,am3359-adc",
- .secondary_feature_name = "TI-am335x-tsc",
- .secondary_feature_compatible = "ti,am3359-tsc",
- .target_clk_rate = TSC_ADC_CLK,
- };
- static const struct ti_tscadc_data magdata = {
- .adc_feature_name = "TI-am43xx-adc",
- .adc_feature_compatible = "ti,am4372-adc",
- .secondary_feature_name = "TI-am43xx-mag",
- .secondary_feature_compatible = "ti,am4372-mag",
- .target_clk_rate = MAG_ADC_CLK,
- };
- static const struct of_device_id ti_tscadc_dt_ids[] = {
- { .compatible = "ti,am3359-tscadc", .data = &tscdata },
- { .compatible = "ti,am4372-magadc", .data = &magdata },
- { }
- };
- MODULE_DEVICE_TABLE(of, ti_tscadc_dt_ids);
- static struct platform_driver ti_tscadc_driver = {
- .driver = {
- .name = "ti_am3359-tscadc",
- .pm = &tscadc_pm_ops,
- .of_match_table = ti_tscadc_dt_ids,
- },
- .probe = ti_tscadc_probe,
- .remove = ti_tscadc_remove,
- };
- module_platform_driver(ti_tscadc_driver);
- MODULE_DESCRIPTION("TI touchscreen/magnetic stripe reader/ADC MFD controller driver");
- MODULE_AUTHOR("Rachna Patil <[email protected]>");
- MODULE_LICENSE("GPL");
|