123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210 |
- // SPDX-License-Identifier: GPL-2.0-only
- /*
- * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
- * Author: Patrice Chotard <[email protected]>
- */
- /dts-v1/;
- #include "stih410.dtsi"
- #include <dt-bindings/gpio/gpio.h>
- / {
- model = "STiH410 B2260";
- compatible = "st,stih410-b2260", "st,stih410";
- chosen {
- stdout-path = &uart1;
- };
- memory@40000000 {
- device_type = "memory";
- reg = <0x40000000 0x40000000>;
- };
- aliases {
- serial1 = &uart1;
- ethernet0 = ðernet0;
- };
- leds {
- compatible = "gpio-leds";
- user_green_1 {
- label = "User_green_1";
- gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
- user_green_2 {
- label = "User_green_2";
- gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- user_green_3 {
- label = "User_green_3";
- gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- user_green_4 {
- label = "User_green_4";
- gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
- sound: sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "STI-B2260";
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
- simple-audio-card,dai-link@0 {
- reg = <0>;
- /* DAC */
- format = "i2s";
- mclk-fs = <128>;
- cpu {
- sound-dai = <&sti_uni_player0>;
- };
- codec {
- sound-dai = <&sti_hdmi>;
- };
- };
- };
- miphy28lp_phy: miphy28lp {
- phy_port1: port@9b2a000 {
- st,osc-force-ext;
- };
- };
- usb2_picophy1: phy2 {
- status = "okay";
- };
- usb2_picophy2: phy3 {
- status = "okay";
- };
- soc {
- /* Low speed expansion connector */
- uart0: serial@9830000 {
- label = "LS-UART0";
- pinctrl-names = "default", "no-hw-flowctrl";
- pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>;
- pinctrl-1 = <&pinctrl_serial0>;
- rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
- uart-has-rtscts;
- status = "okay";
- };
- /* Low speed expansion connector */
- uart1: serial@9831000 {
- label = "LS-UART1";
- status = "okay";
- };
- /* Low speed expansion connector */
- spi0: spi@9844000 {
- label = "LS-SPI0";
- cs-gpios = <&pio30 3 0>;
- status = "okay";
- };
- /* Low speed expansion connector */
- i2c0: i2c@9840000 {
- label = "LS-I2C0";
- status = "okay";
- };
- /* Low speed expansion connector */
- i2c1: i2c@9841000 {
- label = "LS-I2C1";
- status = "okay";
- };
- /* high speed expansion connector */
- i2c2: i2c@9842000 {
- label = "HS-I2C2";
- pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
- status = "okay";
- };
- /* high speed expansion connector */
- i2c3: i2c@9843000 {
- label = "HS-I2C3";
- pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
- status = "okay";
- };
- mmc0: sdhci@9060000 {
- pinctrl-0 = <&pinctrl_sd0>;
- bus-width = <4>;
- status = "okay";
- };
- /* high speed expansion connector */
- mmc1: sdhci@9080000 {
- status = "okay";
- };
- pwm0: pwm@9810000 {
- status = "okay";
- };
- pwm1: pwm@9510000 {
- status = "okay";
- };
- ohci0: usb@9a03c00 {
- status = "okay";
- };
- ehci0: usb@9a03e00 {
- status = "okay";
- };
- ohci1: usb@9a83c00 {
- status = "okay";
- };
- ehci1: usb@9a83e00 {
- status = "okay";
- };
- st_dwc3: dwc3@8f94000 {
- status = "okay";
- };
- ethernet0: dwmac@9630000 {
- phy-mode = "rgmii";
- pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
- snps,reset-gpio = <&pio0 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- status = "okay";
- };
- sti_uni_player0: sti-uni-player@8d80000 {
- status = "okay";
- };
- /* SSC11 to HDMI */
- hdmiddc: i2c@9541000 {
- /* HDMI V1.3a supports Standard mode only */
- clock-frequency = <100000>;
- st,i2c-min-scl-pulse-width-us = <0>;
- st,i2c-min-sda-pulse-width-us = <5>;
- status = "okay";
- };
- sata1: sata@9b28000 {
- status = "okay";
- };
- };
- };
|