| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475 |
- .. SPDX-License-Identifier: GPL-2.0
- Kernel driver pli1209bc
- =======================
- Supported chips:
- * Digital Supervisor PLI1209BC
- Prefix: 'pli1209bc'
- Addresses scanned: 0x50 - 0x5F
- Datasheet: https://www.vicorpower.com/documents/datasheets/ds-PLI1209BCxyzz-VICOR.pdf
- Authors:
- - Marcello Sylvester Bauer <[email protected]>
- Description
- -----------
- The Vicor PLI1209BC is an isolated digital power system supervisor that provides
- a communication interface between a host processor and one Bus Converter Module
- (BCM). The PLI communicates with a system controller via a PMBus compatible
- interface over an isolated UART interface. Through the PLI, the host processor
- can configure, set protection limits, and monitor the BCM.
- Sysfs entries
- -------------
- ======================= ========================================================
- in1_label "vin2"
- in1_input Input voltage.
- in1_rated_min Minimum rated input voltage.
- in1_rated_max Maximum rated input voltage.
- in1_max Maximum input voltage.
- in1_max_alarm Input voltage high alarm.
- in1_crit Critical input voltage.
- in1_crit_alarm Input voltage critical alarm.
- in2_label "vout2"
- in2_input Output voltage.
- in2_rated_min Minimum rated output voltage.
- in2_rated_max Maximum rated output voltage.
- in2_alarm Output voltage alarm
- curr1_label "iin2"
- curr1_input Input current.
- curr1_max Maximum input current.
- curr1_max_alarm Maximum input current high alarm.
- curr1_crit Critical input current.
- curr1_crit_alarm Input current critical alarm.
- curr2_label "iout2"
- curr2_input Output current.
- curr2_crit Critical output current.
- curr2_crit_alarm Output current critical alarm.
- curr2_max Maximum output current.
- curr2_max_alarm Output current high alarm.
- power1_label "pin2"
- power1_input Input power.
- power1_alarm Input power alarm.
- power2_label "pout2"
- power2_input Output power.
- power2_rated_max Maximum rated output power.
- temp1_input Die temperature.
- temp1_alarm Die temperature alarm.
- temp1_max Maximum die temperature.
- temp1_max_alarm Die temperature high alarm.
- temp1_crit Critical die temperature.
- temp1_crit_alarm Die temperature critical alarm.
- ======================= ========================================================
|
