| 1234567891011121314151617181920212223242526272829303132333435 |
- ==============
- CerfBoard/Cube
- ==============
- *** The StrongARM version of the CerfBoard/Cube has been discontinued ***
- The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board
- that measures approximately 2" square. It includes an Ethernet
- controller, an RS232-compatible serial port, a USB function port, and
- one CompactFlash+ slot on the back. Pictures can be found at the
- Intrinsyc website, http://www.intrinsyc.com.
- This document describes the support in the Linux kernel for the
- Intrinsyc CerfBoard.
- Supported in this version
- =========================
- - CompactFlash+ slot (select PCMCIA in General Setup and any options
- that may be required)
- - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in
- Network Devices)
- - Serial ports with a serial console (hardcoded to 38400 8N1)
- In order to get this kernel onto your Cerf, you need a server that runs
- both BOOTP and TFTP. Detailed instructions should have come with your
- evaluation kit on how to use the bootloader. This series of commands
- will suffice::
- make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig
- make ARCH=arm CROSS_COMPILE=arm-linux- zImage
- make ARCH=arm CROSS_COMPILE=arm-linux- modules
- cp arch/arm/boot/zImage <TFTP directory>
- [email protected]
|
