android_kernel_samsung_sm8650-modules/wmi_unified_extscan_api.c

/*
 * Copyright (c) 2016-2018 The Linux Foundation. All rights reserved.
 *
 * Permission to use, copy, modify, and/or distribute this software for
 * any purpose with or without fee is hereby granted, provided that the
 * above copyright notice and this permission notice appear in all
 * copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
 * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
 * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
 * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
 * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 * PERFORMANCE OF THIS SOFTWARE.
 */

#include "wmi_unified_priv.h"

/**
 * wmi_unified_reset_passpoint_network_list_cmd() - reset passpoint network list
 * @wmi_hdl: wmi handle
 * @req: passpoint network request structure
 *
 * This function sends down WMI command with network id set to wildcard id.
 * firmware shall clear all the config entries
 *
 * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
 */
QDF_STATUS wmi_unified_reset_passpoint_network_list_cmd(void *wmi_hdl,
					struct wifi_passpoint_req_param *req)
{
	wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;

	if (wmi_handle->ops->send_reset_passpoint_network_list_cmd)
		return wmi_handle->ops->send_reset_passpoint_network_list_cmd(wmi_handle,
			    req);

	return QDF_STATUS_E_FAILURE;
}

/**
 * wmi_unified_set_passpoint_network_list_cmd() - set passpoint network list
 * @wmi_hdl: wmi handle
 * @req: passpoint network request structure
 *
 * This function reads the incoming @req and fill in the destination
 * WMI structure and send down the passpoint configs down to the firmware
 *
 * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
 */
QDF_STATUS wmi_unified_set_passpoint_network_list_cmd(void *wmi_hdl,
					struct wifi_passpoint_req_param *req)
{
	wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;

	if (wmi_handle->ops->send_set_passpoint_network_list_cmd)
		return wmi_handle->ops->send_set_passpoint_network_list_cmd(wmi_handle,
			    req);

	return QDF_STATUS_E_FAILURE;
}

/** wmi_unified_set_epno_network_list_cmd() - set epno network list
 * @wmi_hdl: wmi handle
 * @req: epno config params request structure
 *
 * This function reads the incoming epno config request structure
 * and constructs the WMI message to the firmware.
 *
 * Returns: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures,
 *          error number otherwise
 */
QDF_STATUS wmi_unified_set_epno_network_list_cmd(void *wmi_hdl,
		struct wifi_enhanched_pno_params *req)
{
	wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;

	if (wmi_handle->ops->send_set_epno_network_list_cmd)
		return wmi_handle->ops->send_set_epno_network_list_cmd(wmi_handle,
			    req);

	return QDF_STATUS_E_FAILURE;
}

/**
 * wmi_unified_extscan_get_capabilities_cmd() - extscan get capabilities
 * @wmi_hdl: wmi handle
 * @pgetcapab: get capabilities params
 *
 * This function send request to fw to get extscan capabilities.
 *
 * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
 */
QDF_STATUS wmi_unified_extscan_get_capabilities_cmd(void *wmi_hdl,
			  struct extscan_capabilities_params *pgetcapab)
{
	wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;

	if (wmi_handle->ops->send_extscan_get_capabilities_cmd)
		return wmi_handle->ops->send_extscan_get_capabilities_cmd(wmi_handle,
			    pgetcapab);

	return QDF_STATUS_E_FAILURE;
}

/**
 * wmi_unified_extscan_get_cached_results_cmd() - extscan get cached results
 * @wmi_hdl: wmi handle
 * @pcached_results: cached results parameters
 *
 * This function send request to fw to get cached results.
 *
 * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
 */
QDF_STATUS wmi_unified_extscan_get_cached_results_cmd(void *wmi_hdl,
			  struct extscan_cached_result_params *pcached_results)
{
	wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;

	if (wmi_handle->ops->send_extscan_get_cached_results_cmd)
		return wmi_handle->ops->send_extscan_get_cached_results_cmd(wmi_handle,
			    pcached_results);

	return QDF_STATUS_E_FAILURE;
}

/**
 * wmi_unified_extscan_stop_change_monitor_cmd() - send stop change monitor cmd
 * @wmi_hdl: wmi handle
 * @reset_req: Reset change request params
 *
 * This function sends stop change monitor request to fw.
 *
 * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
 */
QDF_STATUS wmi_unified_extscan_stop_change_monitor_cmd(void *wmi_hdl,
			  struct extscan_capabilities_reset_params *reset_req)
{
	wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;

	if (wmi_handle->ops->send_extscan_stop_change_monitor_cmd)
		return wmi_handle->ops->send_extscan_stop_change_monitor_cmd(wmi_handle,
			    reset_req);

	return QDF_STATUS_E_FAILURE;
}



/**
 * wmi_unified_extscan_start_change_monitor_cmd() - start change monitor cmd
 * @wmi_hdl: wmi handle
 * @psigchange: change monitor request params
 *
 * This function sends start change monitor request to fw.
 *
 * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
 */
QDF_STATUS wmi_unified_extscan_start_change_monitor_cmd(void *wmi_hdl,
				   struct extscan_set_sig_changereq_params *
				   psigchange)
{
	wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;

	if (wmi_handle->ops->send_extscan_start_change_monitor_cmd)
		return wmi_handle->ops->send_extscan_start_change_monitor_cmd(wmi_handle,
			    psigchange);

	return QDF_STATUS_E_FAILURE;
}

/**
 * wmi_unified_extscan_stop_hotlist_monitor_cmd() - stop hotlist monitor
 * @wmi_hdl: wmi handle
 * @photlist_reset: hotlist reset params
 *
 * This function configures hotlist monitor to stop in fw.
 *
 * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
 */
QDF_STATUS wmi_unified_extscan_stop_hotlist_monitor_cmd(void *wmi_hdl,
		  struct extscan_bssid_hotlist_reset_params *photlist_reset)
{
	wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;

	if (wmi_handle->ops->send_extscan_stop_hotlist_monitor_cmd)
		return wmi_handle->ops->send_extscan_stop_hotlist_monitor_cmd(wmi_handle,
			    photlist_reset);

	return QDF_STATUS_E_FAILURE;
}

/**
 * wmi_unified_stop_extscan_cmd() - stop extscan command to fw.
 * @wmi_hdl: wmi handle
 * @pstopcmd: stop scan command request params
 *
 * This function sends stop extscan request to fw.
 *
 * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
 */
QDF_STATUS wmi_unified_stop_extscan_cmd(void *wmi_hdl,
			  struct extscan_stop_req_params *pstopcmd)
{
	wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;

	if (wmi_handle->ops->send_stop_extscan_cmd)
		return wmi_handle->ops->send_stop_extscan_cmd(wmi_handle,
			    pstopcmd);

	return QDF_STATUS_E_FAILURE;
}

/**
 * wmi_unified_start_extscan_cmd() - start extscan command to fw.
 * @wmi_hdl: wmi handle
 * @pstart: scan command request params
 *
 * This function sends start extscan request to fw.
 *
 * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
 */
QDF_STATUS wmi_unified_start_extscan_cmd(void *wmi_hdl,
			  struct wifi_scan_cmd_req_params *pstart)
{
	wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;

	if (wmi_handle->ops->send_start_extscan_cmd)
		return wmi_handle->ops->send_start_extscan_cmd(wmi_handle,
			    pstart);

	return QDF_STATUS_E_FAILURE;
}

/**
 * wmi_unified_get_buf_extscan_hotlist_cmd() - prepare hotlist command
 * @wmi_hdl: wmi handle
 * @photlist: hotlist command params
 * @buf_len: buffer length
 *
 * This function fills individual elements for  hotlist request and
 * TLV for bssid entries
 *
 * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
 */
QDF_STATUS wmi_unified_get_buf_extscan_hotlist_cmd(void *wmi_hdl,
				   struct ext_scan_setbssi_hotlist_params *
				   photlist, int *buf_len)
{
	wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;

	if (wmi_handle->ops->send_get_buf_extscan_hotlist_cmd)
		return wmi_handle->ops->send_get_buf_extscan_hotlist_cmd(wmi_handle,
				  photlist, buf_len);

	return QDF_STATUS_E_FAILURE;
}