android_kernel_samsung_sm8650-modules/soc/Kbuild

# We can build either as part of a standalone Kernel build or as
# an external module.  Determine which mechanism is being used
ifeq ($(MODNAME),)
	KERNEL_BUILD := 1
else
	KERNEL_BUILD := 0
endif

ifeq ($(KERNEL_BUILD), 1)
	# These are configurable via Kconfig for kernel-based builds
	# Need to explicitly configure for Android-based builds
	AUDIO_BLD_DIR := $(shell pwd)/kernel/msm-5.4
	AUDIO_ROOT := $(AUDIO_BLD_DIR)/techpack/audio
endif

ifeq ($(CONFIG_SND_SOC_AUTO), y)
	ifdef CONFIG_SND_SOC_SA8155
		include $(AUDIO_ROOT)/config/sa8155auto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/sa8155autoconf.h
	endif
	ifdef CONFIG_SND_SOC_SA6155
		include $(AUDIO_ROOT)/config/sa6155auto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/sa6155autoconf.h
	endif
else
ifeq ($(KERNEL_BUILD), 0)
	ifeq ($(CONFIG_ARCH_SM8150), y)
		ifdef CONFIG_SND_SOC_SA8155
			include $(AUDIO_ROOT)/config/sa8155auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sa8155autoconf.h
		else
			include $(AUDIO_ROOT)/config/sm8150auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sm8150autoconf.h
		endif
	endif
	ifeq ($(CONFIG_ARCH_KONA), y)
		include $(AUDIO_ROOT)/config/konaauto.conf
		INCS    +=  -include $(AUDIO_ROOT)/config/konaautoconf.h
	endif
	ifeq ($(CONFIG_ARCH_LITO), y)
		include $(AUDIO_ROOT)/config/litoauto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/litoautoconf.h
	endif
	ifeq ($(CONFIG_ARCH_BENGAL), y)
		include $(AUDIO_ROOT)/config/bengalauto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/bengalautoconf.h
	endif
	ifeq ($(CONFIG_ARCH_SM6150), y)
		ifdef CONFIG_SND_SOC_SA6155
			include $(AUDIO_ROOT)/config/sa6155auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sa6155autoconf.h
		else
			include $(AUDIO_ROOT)/config/sm6150auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sm6150autoconf.h
		endif
	endif
	ifeq ($(CONFIG_ARCH_TRINKET), y)
		include $(AUDIO_ROOT)/config/sm6150auto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/sm6150autoconf.h
	endif
	ifeq ($(CONFIG_ARCH_SDMSHRIKE), y)
		ifdef CONFIG_SND_SOC_SA8155
			include $(AUDIO_ROOT)/config/sa8155auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sa8155autoconf.h
		else
			include $(AUDIO_ROOT)/config/sm8150auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sm8150autoconf.h
		endif
	endif
	ifeq ($(CONFIG_ARCH_QCS405), y)
		include $(AUDIO_ROOT)/config/qcs405auto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/qcs405autoconf.h
	endif
	ifeq ($(CONFIG_QTI_QUIN_GVM), y)
		include $(AUDIO_ROOT)/config/gvmauto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/gvmautoconf.h
	endif
	ifeq ($(CONFIG_ARCH_SDXLEMUR), y)
		include $(AUDIO_ROOT)/config/sdxlemurauto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/sdxlemurautoconf.h
	endif
endif
endif

# As per target team, build is done as follows:
# Defconfig : build with default flags
# Slub      : defconfig  + CONFIG_SLUB_DEBUG := y +
#	      CONFIG_SLUB_DEBUG_ON := y + CONFIG_PAGE_POISONING := y
# Perf      : Using appropriate msmXXXX-perf_defconfig
#
# Shipment builds (user variants) should not have any debug feature
# enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds
# are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since
# there is no other way to identify defconfig builds, QTI internal
# representation of perf builds (identified using the string 'perf'),
# is used to identify if the build is a slub or defconfig one. This
# way no critical debug feature will be enabled for perf and shipment
# builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT
# config.

############ UAPI ############
UAPI_DIR :=	uapi/audio
UAPI_INC :=	-I$(AUDIO_ROOT)/include/$(UAPI_DIR)

############ COMMON ############
COMMON_DIR :=	include
COMMON_INC :=	-I$(AUDIO_ROOT)/$(COMMON_DIR)

############ SoC Modules ############

# for pinctrl WCD driver
ifdef CONFIG_PINCTRL_WCD
	PINCTRL_WCD_OBJS += pinctrl-wcd.o
endif

# for pinctrl LPI driver
ifdef CONFIG_PINCTRL_LPI
	PINCTRL_LPI_OBJS += pinctrl-lpi.o
endif

# for soundwire driver
ifdef CONFIG_SOUNDWIRE_WCD_CTRL
	SWR_CTRL_OBJS += swr-wcd-ctrl.o
endif

# for new soundwire driver
ifdef CONFIG_SOUNDWIRE_MSTR_CTRL
	SWR_CTRL_OBJS += swr-mstr-ctrl.o
endif

ifdef CONFIG_SOUNDWIRE
	SWR_OBJS += regmap-swr.o
	SWR_OBJS += soundwire.o
endif

ifdef CONFIG_SND_EVENT
	SND_EVENT_OBJS += snd_event.o
endif

ifdef CONFIG_WCD_SPI_AC
	WCD_SPI_ACC_CTL_OBJS += wcd-spi-ac.o
	WCD_SPI_ACC_CTL_OBJS += wcd_spi_ctl_v01.o
endif

LINUX_INC +=	-Iinclude/linux

INCS +=		$(COMMON_INC) \
		$(UAPI_INC)

EXTRA_CFLAGS += $(INCS)


CDEFINES +=	-DANI_LITTLE_BYTE_ENDIAN \
		-DANI_LITTLE_BIT_ENDIAN \
		-DDOT11F_LITTLE_ENDIAN_HOST \
		-DANI_COMPILER_TYPE_GCC \
		-DANI_OS_TYPE_ANDROID=6 \
		-DPTT_SOCK_SVC_ENABLE \
		-Wall\
		-Werror\
		-D__linux__

KBUILD_CPPFLAGS += $(CDEFINES)

ifeq ($(KERNEL_BUILD), 0)
KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/dsp/Module.symvers
endif

# Currently, for versions of gcc which support it, the kernel Makefile
# is disabling the maybe-uninitialized warning.  Re-enable it for the
# AUDIO driver.  Note that we must use EXTRA_CFLAGS here so that it
# will override the kernel settings.
ifeq ($(call cc-option-yn, -Wmaybe-uninitialized),y)
EXTRA_CFLAGS += -Wmaybe-uninitialized
endif
#EXTRA_CFLAGS += -Wmissing-prototypes

ifeq ($(call cc-option-yn, -Wheader-guard),y)
EXTRA_CFLAGS += -Wheader-guard
endif

ifeq ($(CONFIG_SND_SOC_GCOV), y)
GCOV_PROFILE := y
endif

# Module information used by KBuild framework
obj-$(CONFIG_PINCTRL_WCD) += pinctrl_wcd_dlkm.o
pinctrl_wcd_dlkm-y := $(PINCTRL_WCD_OBJS)

obj-$(CONFIG_PINCTRL_LPI) += pinctrl_lpi_dlkm.o
pinctrl_lpi_dlkm-y := $(PINCTRL_LPI_OBJS)

obj-$(CONFIG_SOUNDWIRE) += swr_dlkm.o
swr_dlkm-y := $(SWR_OBJS)

obj-$(CONFIG_SND_EVENT) += snd_event_dlkm.o
snd_event_dlkm-y := $(SND_EVENT_OBJS)

obj-$(CONFIG_SOUNDWIRE_WCD_CTRL) += swr_ctrl_dlkm.o
obj-$(CONFIG_SOUNDWIRE_MSTR_CTRL) += swr_ctrl_dlkm.o
swr_ctrl_dlkm-y := $(SWR_CTRL_OBJS)

obj-$(CONFIG_WCD_SPI_AC) += wcd_spi_acc_ctl_dlkm.o
wcd_spi_acc_ctl_dlkm-y := $(WCD_SPI_ACC_CTL_OBJS)

# inject some build related information
DEFINES += -DBUILD_TIMESTAMP=\"$(shell date -u +'%Y-%m-%dT%H:%M:%SZ')\"