Files
android_kernel_samsung_sm86…/target_if/cfr/inc/target_if_cfr.h
Shwetha G K 282b71f640 qcacmn: Support CFR capture_count and MO marking requirement
Support a new capture_interval_mode: capture_count, where after
capture_count+1 number of frames, MAC stops channel capture and
waits for capture_interval duration before enabling again.

Add nob(capture_intervalmode_sel) to switch to capture_count or
capture_duration mode in wlanconfig application, where
capture_intervalmode_sel=0 indicates the old capture_durarion
mode where MAC stops channel capture after capture_duration
instead of capture_count. capture_intervalmode_sel=1 indicates
the capture_count mode.

Support MO marking: Current ENH CFR uses the existing MD/MO,
type/subtype filters to filterin the packets with programmed
type/subtype as either MD/MO. But for m_TARA it is also required
to consider the bw/nss/ta/ra setting. Therefore, it is possible
that not all the filtered-in PPDUs have channel capture and lead
to processing of packets which does not have captured data.
To overcome this issue, from QCN9000 onwards, MAC has MO marking
feature added for M_TARA filter mode, where MAC will consider
all TARA group configuration as filterin criteria & provides
an option to HOST to choose either filterin mode as FP or MO.
en_ta_ra_filter_in_as_fp is added to support MO marking.
Based on the discussion between HOST, FW & MAC teams, 0 is the
recommended & default setting for en_ta_ra_filter_in_as_fp.
Add nob to configure en_ta_ra_filter_in_as_fp but do not expose
to user.

Change-Id: I790d7ce500a7d779ea571635690f73dbc582cf33
2020-07-29 09:39:51 -07:00

208 lines
6.2 KiB
C

/*
* Copyright (c) 2019-2020 The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _TARGET_IF_CFR_H_
#define _TARGET_IF_CFR_H_
#include <wlan_objmgr_cmn.h>
#include <wlan_objmgr_psoc_obj.h>
#include <wlan_objmgr_pdev_obj.h>
#include <wlan_objmgr_vdev_obj.h>
#include <wlan_objmgr_peer_obj.h>
#include "wmi_unified_cfr_api.h"
#include "wmi_unified_param.h"
#include "wmi_unified_cfr_param.h"
#define PEER_CFR_CAPTURE_ENABLE 1
#define PEER_CFR_CAPTURE_DISABLE 0
#define PEER_CFR_CAPTURE_EVT_STATUS_MASK 0x80000000
#define PEER_CFR_CAPTURE_EVT_PS_STATUS_MASK 0x40000000
#define CFR_TX_EVT_STATUS_MASK 0x00000003
/* Status codes used by correlate and relay function */
#define STATUS_STREAM_AND_RELEASE 0
#define STATUS_HOLD 1
#define STATUS_ERROR -1
/* Module IDs using corrlation function */
#define CORRELATE_DBR_MODULE_ID 0
/*
* HKV2 - Tx completion event for one-shot capture
* Cypress - Tx completion event for one-shot capture (or) RXTLV event for RCC
*/
#define CORRELATE_TX_EV_MODULE_ID 1
/**
* target_if_cfr_init_pdev() - Inits cfr pdev and registers necessary handlers.
* @psoc: pointer to psoc object
* @pdev: pointer to pdev object
*
* Return: Registration status for necessary handlers
*/
int target_if_cfr_init_pdev(struct wlan_objmgr_psoc *psoc,
struct wlan_objmgr_pdev *pdev);
/**
* target_if_cfr_deinit_pdev() - De-inits corresponding pdev and handlers.
* @psoc: pointer to psoc object
* @pdev: pointer to pdev object
*
* Return: De-registration status for necessary handlers
*/
int target_if_cfr_deinit_pdev(struct wlan_objmgr_psoc *psoc,
struct wlan_objmgr_pdev *pdev);
/**
* target_if_cfr_tx_ops_register() - Registers tx ops for cfr module
* @tx_ops - pointer to tx_ops structure.
*/
void target_if_cfr_tx_ops_register(struct wlan_lmac_if_tx_ops *tx_ops);
/**
* target_if_cfr_enable_cfr_timer() - Enables cfr timer
* @pdev: pointer to pdev object
* @cfr_timer: Amount of time this timer has to run
*
* Return: status of timer
*/
int target_if_cfr_enable_cfr_timer(struct wlan_objmgr_pdev *pdev,
uint32_t cfr_timer);
/**
* target_if_cfr_pdev_set_param() - Function to set params for cfr config
* @pdev: pointer to pdev object
* @param_id: param id which has to be set
* @param_value: value of param being set
*
* Return: success/failure of setting param
*/
int target_if_cfr_pdev_set_param(struct wlan_objmgr_pdev *pdev,
uint32_t param_id, uint32_t param_value);
/**
* target_if_cfr_start_capture() - Function to start cfr capture for a peer
* @pdev: pointer to pdev object
* @peer: pointer to peer object
* @cfr_params: capture parameters for this peer
*
* Return: success/failure status of start capture
*/
int target_if_cfr_start_capture(struct wlan_objmgr_pdev *pdev,
struct wlan_objmgr_peer *peer,
struct cfr_capture_params *cfr_params);
/**
* target_if_cfr_stop_capture() - Function to stop cfr capture for a peer
* @pdev: pointer to pdev object
* @peer: pointer to peer object
*
* Return: success/failure status of stop capture
*/
int target_if_cfr_stop_capture(struct wlan_objmgr_pdev *pdev,
struct wlan_objmgr_peer *peer);
/**
* target_if_cfr_get_target_type() - Function to get target type
* @psoc: pointer to psoc object
*
* Return: target type of target
*/
int target_if_cfr_get_target_type(struct wlan_objmgr_psoc *psoc);
/**
* target_if_cfr_set_cfr_support() - Function to set cfr support
* @psoc: pointer to psoc object
* @value: value to be set
*/
void target_if_cfr_set_cfr_support(struct wlan_objmgr_psoc *psoc,
uint8_t value);
/**
* target_if_cfr_set_capture_count_support() - Function to set capture count
* support.
* @psoc: pointer to psoc object
* @value: value to be set
*
* Return: success/failure
*/
QDF_STATUS
target_if_cfr_set_capture_count_support(struct wlan_objmgr_psoc *psoc,
uint8_t value);
/**
* target_if_cfr_set_mo_marking_support() - Function to set MO marking support
* @psoc: pointer to psoc object
* @value: value to be set
*
* Return: success/failure
*/
QDF_STATUS
target_if_cfr_set_mo_marking_support(struct wlan_objmgr_psoc *psoc,
uint8_t value);
/**
* target_if_cfr_info_send() - Function to send cfr info to upper layers
* @pdev: pointer to pdev object
* @head: pointer to cfr info head
* @hlen: head len
* @data: pointer to cfr info data
* @dlen: data len
* @tail: pointer to cfr info tail
* @tlen: tail len
*/
void target_if_cfr_info_send(struct wlan_objmgr_pdev *pdev, void *head,
size_t hlen, void *data, size_t dlen, void *tail,
size_t tlen);
#ifdef WIFI_TARGET_TYPE_2_0
/**
* cfr_wifi2_0_init_pdev() - Function to init legacy pdev
* @psoc: pointer to psoc object
* @pdev: pointer to pdev object
*
* Return: success/failure status of init
*/
QDF_STATUS cfr_wifi2_0_init_pdev(struct wlan_objmgr_psoc *psoc,
struct wlan_objmgr_pdev *pdev);
/**
* cfr_wifi2_0_deinit_pdev() - Function to deinit legacy pdev
* @psoc: pointer to psoc object
* @pdev: pointer to pdev object
*
* Return: success/failure status of deinit
*/
QDF_STATUS cfr_wifi2_0_deinit_pdev(struct wlan_objmgr_psoc *psoc,
struct wlan_objmgr_pdev *pdev);
#else
#ifndef CFR_USE_FIXED_FOLDER
static QDF_STATUS cfr_wifi2_0_init_pdev(struct wlan_objmgr_psoc *psoc,
struct wlan_objmgr_pdev *pdev)
{
return QDF_STATUS_SUCCESS;
}
static QDF_STATUS cfr_wifi2_0_deinit_pdev(struct wlan_objmgr_psoc *psoc,
struct wlan_objmgr_pdev *pdev)
{
return QDF_STATUS_SUCCESS;
}
#endif
#endif
#endif