Files
android_kernel_samsung_sm86…/asoc/codecs/wcd939x/internal.h
Sam Rainey 08bc673260 asoc: wcd939x: Support xtalk for high voltage mics
Update zdet and xtalk to support high voltage microphones
with improved accuracy.

Change-Id: I4b0af5ade7f653de4a938162302ec21c4a09891f
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
2023-09-29 16:56:12 -07:00

355 rader
9.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#ifndef _WCD939X_INTERNAL_H
#define _WCD939X_INTERNAL_H
#include <asoc/wcd-mbhc-v2.h>
#include <asoc/wcd-irq.h>
#include <asoc/wcd-clsh.h>
#include <soc/soundwire.h>
#include "wcd939x-mbhc.h"
#include "wcd939x.h"
#define SWR_SCP_CONTROL 0x44
#define SWR_SCP_HOST_CLK_DIV2_CTL_BANK 0xE0
#define WCD939X_MAX_MICBIAS 4
#define R_COMMON_GND_BUFFER_SIZE 4
#define MAX_XTALK_SCALE 31
#define MIN_XTALK_ALPHA 0
#define MIN_K_TIMES_100 -90
#define MAX_K_TIMES_100 10000
#define MAX_USBCSS_HS_IMPEDANCE_MOHMS 20000
#define MIN_DIFF_SLOPE_FACTOR 9800
#define MAX_DIFF_SLOPE_FACTOR 10000
/* Convert from vout ctl to micbias voltage in mV */
#define WCD_VOUT_CTL_TO_MICB(v) (1000 + v * 50)
#define MAX_PORT 8
#define MAX_CH_PER_PORT 8
#define TX_ADC_MAX 4
#define SWR_NUM_PORTS 4
enum {
RX_CLK_9P6MHZ,
RX_CLK_12P288MHZ,
RX_CLK_11P2896MHZ,
};
enum {
WCD939X_HPHL,
WCD939X_HPHR,
WCD939X_HPH_MAX,
};
enum {
TX_HDR12 = 0,
TX_HDR34,
TX_HDR_MAX,
};
enum xtalk_mode {
XTALK_NONE = 0,
XTALK_DIGITAL = 1,
XTALK_ANALOG = 2
};
extern struct regmap_config wcd939x_regmap_config;
struct comp_coeff_val {
u8 lsb;
u8 msb;
};
struct codec_port_info {
u32 slave_port_type;
u32 master_port_type;
u32 ch_mask;
u32 num_ch;
u32 ch_rate;
};
struct wcd939x_priv {
struct device *dev;
int variant;
struct snd_soc_component *component;
struct device_node *rst_np;
struct regmap *regmap;
struct swr_device *rx_swr_dev;
struct swr_device *tx_swr_dev;
s32 micb_ref[WCD939X_MAX_MICBIAS];
s32 pullup_ref[WCD939X_MAX_MICBIAS];
struct fw_info *fw_data;
struct device_node *wcd_rst_np;
struct mutex micb_lock;
struct mutex wakeup_lock;
s32 dmic_0_1_clk_cnt;
s32 dmic_2_3_clk_cnt;
s32 dmic_4_5_clk_cnt;
s32 dmic_6_7_clk_cnt;
int hdr_en[TX_HDR_MAX];
/* class h specific info */
struct wcd_clsh_cdc_info clsh_info;
/* mbhc module */
struct wcd939x_mbhc *mbhc;
/*compander and xtalk*/
int compander_enabled[WCD939X_HPH_MAX];
int xtalk_enabled[WCD939X_HPH_MAX];
u8 hph_pcm_enabled;
u32 hph_mode;
u32 tx_mode[TX_ADC_MAX];
s32 adc_count;
bool comp1_enable;
bool comp2_enable;
bool ldoh;
bool bcs_dis;
bool dapm_bias_off;
bool in_2Vpk_mode;
struct irq_domain *virq;
struct wcd_irq_info irq_info;
u32 rx_clk_cnt;
int num_irq_regs;
/* to track the status */
unsigned long status_mask;
u8 num_tx_ports;
u8 num_rx_ports;
struct codec_port_info
tx_port_mapping[MAX_PORT][MAX_CH_PER_PORT];
struct codec_port_info
rx_port_mapping[MAX_PORT][MAX_CH_PER_PORT];
struct swr_port_params tx_port_params[SWR_UC_MAX][SWR_NUM_PORTS];
struct swr_dev_frame_config swr_tx_port_params[SWR_UC_MAX];
struct regulator_bulk_data *supplies;
struct notifier_block nblock;
/* wcd callback to bolero */
void *handle;
int (*update_wcd_event)(void *handle, u16 event, u32 data);
int (*register_notifier)(void *handle,
struct notifier_block *nblock,
bool enable);
int (*wakeup)(void *handle, bool enable);
u32 version;
/* Entry for version info */
struct snd_info_entry *entry;
struct snd_info_entry *version_entry;
struct snd_info_entry *variant_entry;
int flyback_cur_det_disable;
int ear_rx_path;
bool dev_up;
u8 tx_master_ch_map[WCD939X_MAX_SLAVE_CH_TYPES];
bool usbc_hs_status;
u8 rx_clk_config;
/* wcd to swr dmic notification */
bool notify_swr_dmic;
struct blocking_notifier_head notifier;
};
struct wcd939x_micbias_setting {
u8 ldoh_v;
u32 cfilt1_mv;
u32 micb1_mv;
u32 micb2_mv;
u32 micb3_mv;
u32 micb4_mv;
u8 bias1_cfilt_sel;
};
struct aud_ch_params {
/* Resistance of audio-side internal FET */
u32 r_aud_int_fet_mohms;
/* Resistance of audio-side external FET */
u32 r_aud_ext_fet_mohms;
/* Total right audio-side resistance */
u32 r_aud_res_tot_mohms;
/* Sum of audio-side parasitics and the left/right side of the load */
u32 r_load_eff_mohms;
/* DT audio parasitics between HPH_L/R and HPHL/R_FB, in milliohms */
u32 r1;
/* DT audio-side parasitics between the WCD and external FET,
* in milliohms
*/
u32 r3;
/* Calibrated and adjusted SE zdet measurement value */
u32 zval;
};
struct aud_params {
/* Left-side audio params */
struct aud_ch_params l;
/* Right-side audio params */
struct aud_ch_params r;
/* Surge switch resistance */
u32 r_surge_mohms;
/* Tap out linearizer constant for the audio path, multiplied by 100 from the original
* constants to support decimal values up to the hundredth place
*/
s32 k_aud_times_100;
/* Fixed offset to be applied to audio taps */
s32 aud_tap_offset;
};
struct gnd_sbu_params {
/* Resistance of ground-side internal FET */
u32 r_gnd_int_fet_mohms;
/* Total ground-side parasitics between the WCD and external FET */
u32 r_gnd_par_route1_mohms;
/* Total ground-side parasitics between the external FET and connector */
u32 r_gnd_par_route2_mohms;
/* Total ground-side parasitics between the WCD and connector; sum of route1 and route2 */
u32 r_gnd_par_tot_mohms;
/* Total ground-side resistance */
u32 r_gnd_res_tot_mohms;
/* DT ground-side parasitics between the external FET and connector, in milliohms */
u32 r4;
/* For digital crosstalk with remote sensed analog crosstalk mode, DT ground path parasitic
* resistance between the WCD SBU pin and the external MOSFET, in milliohms
*/
u32 r5;
/* For digital crosstalk with local sensed analog crosstalk mode, DT ground path parasitic
* resistance between the WCD GSBU tap point and the external MOSFET, in milliohms
*/
u32 r6;
/* For digital crosstalk with local sensed analog crosstalk mode, DT ground path parasitic
* resistance between the WCD GSBU tap point and the WCD SBU pin, in milliohms
*/
u32 r7;
};
struct r_common_gnd_buffer {
/* Data for elements in buffer */
u32 data[R_COMMON_GND_BUFFER_SIZE];
/* Index to write next element in buffer */
size_t write_index;
};
struct gnd_params {
/* SBU1-ground params */
struct gnd_sbu_params sbu1;
/* SBU2-ground params */
struct gnd_sbu_params sbu2;
/* FIFO circular buffer for storing previous values of r_common_gnd_mohms */
struct r_common_gnd_buffer r_cm_gnd_buffer;
/* DT resistance of the ground-side external FET, in milliohms */
u32 rdson_mohms;
/* DT resistance of the ground-side external FET, Vgs=3.6V, in milliohms */
u32 rdson_3p6v_mohms;
/* Difference between the ground external FET, Vgs=3.6V and Vgs=6V */
u32 gnd_ext_fet_delta_mohms;
/* Minimum value used for linearizer audio tap calculations */
u32 gnd_ext_fet_min_mohms;
/* SW-computed resistance for the ground-side external FET */
u32 r_gnd_ext_fet_mohms;
/* Total ground-side resistance, with the internal FET and the route1 parasitic removed */
u32 r_common_gnd_mohms;
/* Ground path offset for testing debug, in milliohms */
s32 r_common_gnd_offset;
/* Margin to check if the calculated r_common_gnd is in a reasonable range, in milliohms */
u32 r_common_gnd_margin;
};
struct xtalk_params {
/* Computed optimal d-xtalk left-side scale value */
u8 scale_l;
/* Computed optimal d-xtalk left-side alpha value */
u8 alpha_l;
/* Computed optimal d-xtalk right-side scale value */
u8 scale_r;
/* Computed optimal d-xtalk right-side alpha value */
u8 alpha_r;
/* DT configuration for d-xtalk:
* 0 for digital crosstalk disabled,
* 1 for digital crosstalk with local sensed a-xtalk enabled, and
* 2 for digital crosstalk with remote sensed a-xtalk enabled.
*/
enum xtalk_mode xtalk_config;
};
struct wcd939x_usbcss_hs_params {
/* Audio-side USBCSS-HS impedance parameters */
struct aud_params aud;
/* Ground-side USBCSS-HS impedance parameters */
struct gnd_params gnd;
/* Xtalk-specific parameters */
struct xtalk_params xtalk;
/* Calibrated and adjusted differential zdet measurement value */
u32 zdiffval;
/* Multiplicative scale factor to adjust differential zdet measurement value, times 1000 */
u32 diff_slope_factor_times_1000;
/* Multiplicative scale factor to adjust single-ended zdet measurement value, times 1000 */
u32 se_slope_factor_times_1000;
};
struct wcd939x_pdata {
struct device_node *rst_np;
struct device_node *rx_slave;
struct device_node *tx_slave;
struct wcd939x_micbias_setting micbias;
struct wcd939x_usbcss_hs_params usbcss_hs;
struct cdc_regulator *regulator;
int num_supplies;
};
struct wcd_ctrl_platform_data {
void *handle;
int (*update_wcd_event)(void *handle, u16 event, u32 data);
int (*register_notifier)(void *handle,
struct notifier_block *nblock,
bool enable);
};
enum {
WCD_RX1,
WCD_RX2,
WCD_RX3
};
enum {
/* INTR_CTRL_INT_MASK_0 */
WCD939X_IRQ_MBHC_BUTTON_PRESS_DET = 0,
WCD939X_IRQ_MBHC_BUTTON_RELEASE_DET,
WCD939X_IRQ_MBHC_ELECT_INS_REM_DET,
WCD939X_IRQ_MBHC_ELECT_INS_REM_LEG_DET,
WCD939X_IRQ_MBHC_SW_DET,
WCD939X_IRQ_HPHR_OCP_INT,
WCD939X_IRQ_HPHR_CNP_INT,
WCD939X_IRQ_HPHL_OCP_INT,
/* INTR_CTRL_INT_MASK_1 */
WCD939X_IRQ_HPHL_CNP_INT,
WCD939X_IRQ_EAR_CNP_INT,
WCD939X_IRQ_EAR_SCD_INT,
WCD939X_IRQ_HPHL_PDM_WD_INT,
WCD939X_IRQ_HPHR_PDM_WD_INT,
WCD939X_IRQ_EAR_PDM_WD_INT,
/* INTR_CTRL_INT_MASK_2 */
WCD939X_IRQ_MBHC_MOISTURE_INT,
WCD939X_IRQ_HPHL_SURGE_DET_INT,
WCD939X_IRQ_HPHR_SURGE_DET_INT,
WCD939X_NUM_IRQS,
};
extern struct wcd939x_mbhc *wcd939x_soc_get_mbhc(
struct snd_soc_component *component);
extern void wcd939x_disable_bcs_before_slow_insert(
struct snd_soc_component *component,
bool bcs_disable);
extern int wcd939x_mbhc_micb_adjust_voltage(struct snd_soc_component *component,
int volt, int micb_num);
extern int wcd939x_get_micb_vout_ctl_val(u32 micb_mv);
extern int wcd939x_micbias_control(struct snd_soc_component *component,
int micb_num, int req, bool is_dapm);
#endif /* _WCD939X_INTERNAL_H */