Files
android_kernel_samsung_sm86…/fw_offload/dispatcher/inc/cfg_coex.h
stonez af29a703f3 qcacld-3.0: Add INI parameter to enable/disable MPTA helper
Due to PTA master limitation, zigbee joining network success rate
is low while wlan is working. Wlan host driver need to configure
some parameters including Zigbee state and specific WLAN period to
enhance PTA master. This mechanism is called MPTA helper. The INI
parameter gMPTAHelperEnable is used to enable/disable this feature.

Change-Id: I070c06a00ec2c405540cc40251f5cb7fec211cbd
CRs-Fixed: 2407801
2019-03-15 07:46:55 -07:00

277 lines
5.3 KiB
C

/*
* Copyright (c) 2012 - 2019 The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
/**
* DOC: This file contains centralized definitions of converged configuration.
*/
#ifndef __CFG_COEX_H
#define __CFG_COEX_H
/*
* <ini>
* gSetBTCMode - Config BTC mode
* @Min: 0
* @Max: 2
* @Default: 0
*
* 0 - TDD
* 1 - FDD
* 2 - Hybrid
*
* Usage: External
*
* </ini>
*/
#define CFG_BTC_MODE CFG_INI_UINT( \
"gSetBTCMode", \
0, \
2, \
0, \
CFG_VALUE_OR_DEFAULT, \
"BTC mode")
/*
* <ini>
* gSetAntennaIsolation - Set Antenna Isolation
* @Min: 0
* @Max: 255
* @Default: 25
*
* Usage: External
*
* </ini>
*/
#define CFG_ANTENNA_ISOLATION CFG_INI_UINT( \
"gSetAntennaIsolation", \
0, \
255, \
25, \
CFG_VALUE_OR_DEFAULT, \
"Antenna Isolation")
/*
* <ini>
* gSetMaxTxPowerForBTC - Set Max WLAN Tx power in COEX scenario
* @Min: 0
* @Max: 100
* @Default: 100
*
* Usage: External
*
* </ini>
*/
#define CFG_MAX_TX_POWER_FOR_BTC CFG_INI_UINT( \
"gSetMaxTxPowerForBTC", \
0, \
100, \
100, \
CFG_VALUE_OR_DEFAULT, \
"Max Tx Power for BTC")
/*
* <ini>
* gSetWlanLowRssiThreshold - Set WLAN low RSSI threshold for BTC mode switching
* @Min: -100
* @Max: 0
* @Default: -80
*
* Usage: External
*
* </ini>
*/
#define CFG_WLAN_LOW_RSSI_THRESHOLD CFG_INI_INT( \
"gSetWlanLowRssiThreshold", \
-100, \
0, \
-80, \
CFG_VALUE_OR_DEFAULT, \
"WLAN Low RSSI Threshold")
/*
* <ini>
* gSetBtLowRssiThreshold - Set BT low RSSI threshold for BTC mode switching
* @Min: -100
* @Max: 0
* @Default: -80
*
* Usage: External
*
* </ini>
*/
#define CFG_BT_LOW_RSSI_THRESHOLD CFG_INI_INT( \
"gSetBtLowRssiThreshold", \
-100, \
0, \
-80, \
CFG_VALUE_OR_DEFAULT, \
"BT Low RSSI Threshold")
/*
* <ini>
* gSetBtInterferenceLowLL - Set lower limit of low level BT interference
* @Min: -100
* @Max: 100
* @Default: -25
*
* Usage: External
*
* </ini>
*/
#define CFG_BT_INTERFERENCE_LOW_LL CFG_INI_INT( \
"gSetBtInterferenceLowLL", \
-100, \
100, \
-25, \
CFG_VALUE_OR_DEFAULT, \
"BT Interference Low LL")
/*
* <ini>
* gSetBtInterferenceLowUL - Set upper limit of low level BT interference
* @Min: -100
* @Max: 100
* @Default: -21
*
* Usage: External
*
* </ini>
*/
#define CFG_BT_INTERFERENCE_LOW_UL CFG_INI_INT( \
"gSetBtInterferenceLowUL", \
-100, \
100, \
-21, \
CFG_VALUE_OR_DEFAULT, \
"BT Interference Low UL")
/*
* <ini>
* gSetBtInterferenceMediumLL - Set lower limit of medium level BT interference
* @Min: -100
* @Max: 100
* @Default: -20
*
* Usage: External
*
* </ini>
*/
#define CFG_BT_INTERFERENCE_MEDIUM_LL CFG_INI_INT( \
"gSetBtInterferenceMediumLL", \
-100, \
100, \
-20, \
CFG_VALUE_OR_DEFAULT, \
"BT Interference Medium LL")
/*
* <ini>
* gSetBtInterferenceMediumUL - Set upper limit of medium level BT interference
* @Min: -100
* @Max: 100
* @Default: -16
*
* Usage: External
*
* </ini>
*/
#define CFG_BT_INTERFERENCE_MEDIUM_UL CFG_INI_INT( \
"gSetBtInterferenceMediumUL", \
-100, \
100, \
-16, \
CFG_VALUE_OR_DEFAULT, \
"BT Interference Medium UL")
/*
* <ini>
* gSetBtInterferenceHighLL - Set lower limit of high level BT interference
* @Min: -100
* @Max: 100
* @Default: -15
*
* Usage: External
*
* </ini>
*/
#define CFG_BT_INTERFERENCE_HIGH_LL CFG_INI_INT( \
"gSetBtInterferenceHighLL", \
-100, \
100, \
-15, \
CFG_VALUE_OR_DEFAULT, \
"BT Interference High LL")
/*
* <ini>
* gSetBtInterferenceHighUL - Set upper limit of high level BT interference
* @Min: -100
* @Max: 100
* @Default: -11
*
* Usage: External
*
* </ini>
*/
#define CFG_BT_INTERFERENCE_HIGH_UL CFG_INI_INT( \
"gSetBtInterferenceHighUL", \
-100, \
100, \
-11, \
CFG_VALUE_OR_DEFAULT, \
"BT Interference High UL")
#ifdef FEATURE_MPTA_HELPER
/*
* <ini>
* gMPTAHelperEnable - Enable MPTA Helper
* @Min: 0
* @Max: 1
* @Default: 0
*
* This ini is used to enable or disable coex MPTA Helper.
*
* Usage: External
*
* </ini>
*/
#define CFG_COEX_MPTA_HELPER CFG_INI_BOOL( \
"gMPTAHelperEnable", \
0, \
"Enable/Disable MPTA Helper")
#define COEX_MPTA_HELPER_CFG CFG(CFG_COEX_MPTA_HELPER)
#else
#define COEX_MPTA_HELPER_CFG
#endif
#define CFG_COEX_ALL \
CFG(CFG_BTC_MODE) \
CFG(CFG_ANTENNA_ISOLATION) \
CFG(CFG_MAX_TX_POWER_FOR_BTC) \
CFG(CFG_WLAN_LOW_RSSI_THRESHOLD) \
CFG(CFG_BT_LOW_RSSI_THRESHOLD) \
CFG(CFG_BT_INTERFERENCE_LOW_LL) \
CFG(CFG_BT_INTERFERENCE_LOW_UL) \
CFG(CFG_BT_INTERFERENCE_MEDIUM_LL) \
CFG(CFG_BT_INTERFERENCE_MEDIUM_UL) \
CFG(CFG_BT_INTERFERENCE_HIGH_LL) \
CFG(CFG_BT_INTERFERENCE_HIGH_UL) \
COEX_MPTA_HELPER_CFG
#endif