samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
c047bdc65f3ecc340abd6c93e2402f7e95de17f3
android_kernel_samsung_sm86…/hw/qca5332/pcu_ppdu_setup_init.h
Sajini R 36637cf177 fw-api: Add ipq5332 target header files to fw-api project 
Added ipq5332 target header files under qca5332 to make fw-api
project compatible to host.

Change-Id: Iee6b3f2a809f31e62b45a0f6e9a7cbb66e070fa0
2022-09-06 06:30:14 -07:00

7473 lines
293 KiB
C
Raw Blame History

/* Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _PCU_PPDU_SETUP_INIT_H_
#define _PCU_PPDU_SETUP_INIT_H_
#if !defined(__ASSEMBLER__)
#endif
#include "pdg_response_rate_setting.h"
#define NUM_OF_DWORDS_PCU_PPDU_SETUP_INIT 58
#define NUM_OF_QWORDS_PCU_PPDU_SETUP_INIT 29
struct pcu_ppdu_setup_init {
#ifndef WIFI_BIT_ORDER_BIG_ENDIAN
uint32_t medium_prot_type : 3, // [2:0]
response_type : 5, // [7:3]
response_info_part2_required : 1, // [8:8]
response_to_response : 3, // [11:9]
mba_user_order : 2, // [13:12]
expected_mba_size : 11, // [24:14]
required_ul_mu_resp_user_count : 6, // [30:25]
transmitted_bssid_check_en : 1; // [31:31]
uint32_t mprot_required_bw1 : 1, // [0:0]
mprot_required_bw20 : 1, // [1:1]
mprot_required_bw40 : 1, // [2:2]
mprot_required_bw80 : 1, // [3:3]
mprot_required_bw160 : 1, // [4:4]
mprot_required_bw240 : 1, // [5:5]
mprot_required_bw320 : 1, // [6:6]
ppdu_allowed_bw1 : 1, // [7:7]
ppdu_allowed_bw20 : 1, // [8:8]
ppdu_allowed_bw40 : 1, // [9:9]
ppdu_allowed_bw80 : 1, // [10:10]
ppdu_allowed_bw160 : 1, // [11:11]
ppdu_allowed_bw240 : 1, // [12:12]
ppdu_allowed_bw320 : 1, // [13:13]
set_fc_pwr_mgt : 1, // [14:14]
use_cts_duration_for_data_tx : 1, // [15:15]
update_timestamp_64 : 1, // [16:16]
update_timestamp_32_lower : 1, // [17:17]
update_timestamp_32_upper : 1, // [18:18]
reserved_1a : 13; // [31:19]
uint32_t insert_timestamp_offset_0 : 16, // [15:0]
insert_timestamp_offset_1 : 16; // [31:16]
uint32_t max_bw40_try_count : 4, // [3:0]
max_bw80_try_count : 4, // [7:4]
max_bw160_try_count : 4, // [11:8]
max_bw240_try_count : 4, // [15:12]
max_bw320_try_count : 4, // [19:16]
insert_wur_timestamp_offset : 6, // [25:20]
update_wur_timestamp : 1, // [26:26]
wur_embedded_bssid_present : 1, // [27:27]
insert_wur_fcs : 1, // [28:28]
reserved_3b : 3; // [31:29]
struct pdg_response_rate_setting response_to_response_rate_info_bw20;
struct pdg_response_rate_setting response_to_response_rate_info_bw40;
struct pdg_response_rate_setting response_to_response_rate_info_bw80;
struct pdg_response_rate_setting response_to_response_rate_info_bw160;
struct pdg_response_rate_setting response_to_response_rate_info_bw240;
struct pdg_response_rate_setting response_to_response_rate_info_bw320;
uint32_t r2r_hw_response_tx_duration : 16, // [15:0]
r2r_rx_duration_field : 16; // [31:16]
uint32_t r2r_group_id : 6, // [5:0]
r2r_response_frame_type : 4, // [9:6]
r2r_sta_partial_aid : 11, // [20:10]
use_address_fields_for_protection : 1, // [21:21]
r2r_set_required_response_time : 1, // [22:22]
reserved_29a : 3, // [25:23]
r2r_bw20_active_channel : 3, // [28:26]
r2r_bw40_active_channel : 3; // [31:29]
uint32_t r2r_bw80_active_channel : 3, // [2:0]
r2r_bw160_active_channel : 3, // [5:3]
r2r_bw240_active_channel : 3, // [8:6]
r2r_bw320_active_channel : 3, // [11:9]
r2r_bw20 : 3, // [14:12]
r2r_bw40 : 3, // [17:15]
r2r_bw80 : 3, // [20:18]
r2r_bw160 : 3, // [23:21]
r2r_bw240 : 3, // [26:24]
r2r_bw320 : 3, // [29:27]
reserved_30a : 2; // [31:30]
uint32_t mu_response_expected_bitmap_31_0 : 32; // [31:0]
uint32_t mu_response_expected_bitmap_36_32 : 5, // [4:0]
mu_expected_response_cbf_count : 6, // [10:5]
mu_expected_response_sta_count : 6, // [16:11]
transmit_includes_multidestination : 1, // [17:17]
insert_prev_tx_start_timing_info : 1, // [18:18]
insert_current_tx_start_timing_info : 1, // [19:19]
tx_start_transmit_time_byte_offset : 12; // [31:20]
uint32_t protection_frame_ad1_31_0 : 32; // [31:0]
uint32_t protection_frame_ad1_47_32 : 16, // [15:0]
protection_frame_ad2_15_0 : 16; // [31:16]
uint32_t protection_frame_ad2_47_16 : 32; // [31:0]
uint32_t dynamic_medium_prot_threshold : 24, // [23:0]
dynamic_medium_prot_type : 1, // [24:24]
reserved_54a : 7; // [31:25]
uint32_t protection_frame_ad3_31_0 : 32; // [31:0]
uint32_t protection_frame_ad3_47_32 : 16, // [15:0]
protection_frame_ad4_15_0 : 16; // [31:16]
uint32_t protection_frame_ad4_47_16 : 32; // [31:0]
#else
uint32_t transmitted_bssid_check_en : 1, // [31:31]
required_ul_mu_resp_user_count : 6, // [30:25]
expected_mba_size : 11, // [24:14]
mba_user_order : 2, // [13:12]
response_to_response : 3, // [11:9]
response_info_part2_required : 1, // [8:8]
response_type : 5, // [7:3]
medium_prot_type : 3; // [2:0]
uint32_t reserved_1a : 13, // [31:19]
update_timestamp_32_upper : 1, // [18:18]
update_timestamp_32_lower : 1, // [17:17]
update_timestamp_64 : 1, // [16:16]
use_cts_duration_for_data_tx : 1, // [15:15]
set_fc_pwr_mgt : 1, // [14:14]
ppdu_allowed_bw320 : 1, // [13:13]
ppdu_allowed_bw240 : 1, // [12:12]
ppdu_allowed_bw160 : 1, // [11:11]
ppdu_allowed_bw80 : 1, // [10:10]
ppdu_allowed_bw40 : 1, // [9:9]
ppdu_allowed_bw20 : 1, // [8:8]
ppdu_allowed_bw1 : 1, // [7:7]
mprot_required_bw320 : 1, // [6:6]
mprot_required_bw240 : 1, // [5:5]
mprot_required_bw160 : 1, // [4:4]
mprot_required_bw80 : 1, // [3:3]
mprot_required_bw40 : 1, // [2:2]
mprot_required_bw20 : 1, // [1:1]
mprot_required_bw1 : 1; // [0:0]
uint32_t insert_timestamp_offset_1 : 16, // [31:16]
insert_timestamp_offset_0 : 16; // [15:0]
uint32_t reserved_3b : 3, // [31:29]
insert_wur_fcs : 1, // [28:28]
wur_embedded_bssid_present : 1, // [27:27]
update_wur_timestamp : 1, // [26:26]
insert_wur_timestamp_offset : 6, // [25:20]
max_bw320_try_count : 4, // [19:16]
max_bw240_try_count : 4, // [15:12]
max_bw160_try_count : 4, // [11:8]
max_bw80_try_count : 4, // [7:4]
max_bw40_try_count : 4; // [3:0]
struct pdg_response_rate_setting response_to_response_rate_info_bw20;
struct pdg_response_rate_setting response_to_response_rate_info_bw40;
struct pdg_response_rate_setting response_to_response_rate_info_bw80;
struct pdg_response_rate_setting response_to_response_rate_info_bw160;
struct pdg_response_rate_setting response_to_response_rate_info_bw240;
struct pdg_response_rate_setting response_to_response_rate_info_bw320;
uint32_t r2r_rx_duration_field : 16, // [31:16]
r2r_hw_response_tx_duration : 16; // [15:0]
uint32_t r2r_bw40_active_channel : 3, // [31:29]
r2r_bw20_active_channel : 3, // [28:26]
reserved_29a : 3, // [25:23]
r2r_set_required_response_time : 1, // [22:22]
use_address_fields_for_protection : 1, // [21:21]
r2r_sta_partial_aid : 11, // [20:10]
r2r_response_frame_type : 4, // [9:6]
r2r_group_id : 6; // [5:0]
uint32_t reserved_30a : 2, // [31:30]
r2r_bw320 : 3, // [29:27]
r2r_bw240 : 3, // [26:24]
r2r_bw160 : 3, // [23:21]
r2r_bw80 : 3, // [20:18]
r2r_bw40 : 3, // [17:15]
r2r_bw20 : 3, // [14:12]
r2r_bw320_active_channel : 3, // [11:9]
r2r_bw240_active_channel : 3, // [8:6]
r2r_bw160_active_channel : 3, // [5:3]
r2r_bw80_active_channel : 3; // [2:0]
uint32_t mu_response_expected_bitmap_31_0 : 32; // [31:0]
uint32_t tx_start_transmit_time_byte_offset : 12, // [31:20]
insert_current_tx_start_timing_info : 1, // [19:19]
insert_prev_tx_start_timing_info : 1, // [18:18]
transmit_includes_multidestination : 1, // [17:17]
mu_expected_response_sta_count : 6, // [16:11]
mu_expected_response_cbf_count : 6, // [10:5]
mu_response_expected_bitmap_36_32 : 5; // [4:0]
uint32_t protection_frame_ad1_31_0 : 32; // [31:0]
uint32_t protection_frame_ad2_15_0 : 16, // [31:16]
protection_frame_ad1_47_32 : 16; // [15:0]
uint32_t protection_frame_ad2_47_16 : 32; // [31:0]
uint32_t reserved_54a : 7, // [31:25]
dynamic_medium_prot_type : 1, // [24:24]
dynamic_medium_prot_threshold : 24; // [23:0]
uint32_t protection_frame_ad3_31_0 : 32; // [31:0]
uint32_t protection_frame_ad4_15_0 : 16, // [31:16]
protection_frame_ad3_47_32 : 16; // [15:0]
uint32_t protection_frame_ad4_47_16 : 32; // [31:0]
#endif
};
/* Description MEDIUM_PROT_TYPE
Self Gen Medium Protection type used
<enum 0 No_protection>
<enum 1 RTS_legacy>
<enum 2 RTS_11ac_static_bw>
<enum 3 RTS_11ac_dynamic_bw>
<enum 4 CTS2Self>
<enum 5 QoS_Null_no_ack_3addr>
<enum 6 QoS_Null_no_ack_4addr>
<legal 0-6>
*/
#define PCU_PPDU_SETUP_INIT_MEDIUM_PROT_TYPE_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_MEDIUM_PROT_TYPE_LSB 0
#define PCU_PPDU_SETUP_INIT_MEDIUM_PROT_TYPE_MSB 2
#define PCU_PPDU_SETUP_INIT_MEDIUM_PROT_TYPE_MASK 0x0000000000000007
/* Description RESPONSE_TYPE
PPDU transmission Response type expected
Used by PDG to calculate the anticipated response duration
time.
Used by TXPCU to prepare for expecting to receive a response.
<enum 0 no_response_expected>After transmission of this
frame, no response in SIFS time is expected
When TXPCU sees this setting, it shall not generated the
EXPECTED_RESPONSE TLV.
RXPCU should never see this setting
<enum 1 ack_expected>An ACK frame is expected as response
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received.
<enum 2 ba_64_bitmap_expected>BA with 64 bitmap is expected.
PDG DOES NOT use the size info to calculated response duration.
The length of the response will have to be programmed by
SW in the per-BW 'Expected_ppdu_resp_length' field.
For TXPCU only the fact that it is a BA is important. Actual
received BA size is not important
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received.
<enum 3 ba_256_expected>BA with 256 bitmap is expected.
PDG DOES NOT use the size info to calculated response duration.
The length of the response will have to be programmed by
SW in the per-BW 'Expected_ppdu_resp_length' field.
For TXPCU only the fact that it is a BA is important. Actual
received BA size is not important
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received.
<enum 4 actionnoack_expected>SW sets this after sending
NDP or BR-Poll.
As PDG has no idea on how long the reception is going to
be, the reception time of the response will have to be
programmed by SW in the 'Extend_duration_value_bw...' field
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received.
<enum 5 ack_ba_expected>PDG uses the size info and assumes
single BA format with ACK and 64 bitmap embedded.
If SW expects more bitmaps in case of multi-TID, is shall
program the 'Extend_duration_value_bw...' field for additional
duration time.
For TXPCU only the fact that an ACK and/or BA is received
is important. Reception of only ACK or BA is also considered
a success.
SW also typically sets this when sending VHT single MPDU.
Some chip vendors might send BA rather than ACK in response
to VHT single MPDU but still we want to accept BA as well.
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received.
<enum 6 cts_expected>SW sets this after queuing RTS frame
as standalone packet and sending it.
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received.
<enum 7 ack_data_expected>SW sets this after sending PS-Poll.
For TXPCU either ACK and/or data reception is considered
success.
PDG basis it's response duration calculation on an ACK.
For the data portion, SW shall program the 'Extend_duration_value_bw...'
field
<enum 8 ndp_ack_expected>Reserved for 11ah usage.
<enum 9 ndp_modified_ack>Reserved for 11ah usage
<enum 10 ndp_ba_expected>Reserved for 11ah usage.
<enum 11 ndp_cts_expected>Reserved for 11ah usage
<enum 12 ndp_ack_or_ndp_modified_ack_expected>Reserved for
11ah usage
<enum 13 ul_mu_ba_expected>NOT SUPPORTED IN NAPIER AX AND
HASTINGS
TXPCU expects UL MU OFDMA or UL MU MIMO reception.
As PDG does not know how RUs are assigned for the uplink
portion, PDG can not calculate the uplink duration. Therefor
SW shall program the 'Extend_duration_value_bw...' field
RXPCU will report any frame received, irrespective of it
having been UL MU or SU It is TXPCUs responsibility to
distinguish between the UL MU or SU
TXPCU can check in TLV RECEIVED_RESPONSE_INFO MU_Response_BA_bitmap
if indeed BA was received
<enum 14 ul_mu_ba_and_data_expected>NOT SUPPORTED IN NAPIER
AX AND HASTINGS
TXPCU expects UL MU OFDMA or UL MU MIMO reception.
As PDG does not know how RUs are assigned for the uplink
portion, PDG can not calculate the uplink duration. Therefor
SW shall program the 'Extend_duration_value_bw...' field
RXPCU will report any frame received, irrespective of it
having been UL MU or SU It is TXPCUs responsibility to
distinguish between the UL MU or SU
TXPCU can check in TLV RECEIVED_RESPONSE_INFO, field MU_Response_data_bitmap
and MU_Response_BA_bitmap if indeed BA and data was received
<enum 15 ul_mu_cbf_expected>NOT SUPPORTED IN NAPIER AX AND
HASTINGS
When selected, CBF frames are expected to be received in
MU reception (uplink OFDMA or uplink MIMO)
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received
TXPCU can check in TLV RECEIVED_RESPONSE_INFO, field MU_Response_cbf_bitmap
if indeed CBF frames were received.
<enum 16 ul_mu_frames_expected>When selected, MPDU frames
are expected in the MU reception (uplink OFDMA or uplink
MIMO)
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received
TXPCU can check in TLV RECEIVED_RESPONSE_INFO, field MU_Response_bitmap
if indeed frames were received.
<enum 17 any_response_to_this_device>Any response expected
to be send to this device in SIFS time is acceptable.
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received
For TXPCU, UL MU or SU is both acceptable.
Can be used for complex OFDMA scenarios. PDG can not calculate
the uplink duration. Therefor SW shall program the 'Extend_duration_value_bw...'
field
<enum 18 any_response_accepted>Any frame in the medium to
this or any other device, is acceptable as response.
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received
For TXPCU, UL MU or SU is both acceptable.
Can be used for complex OFDMA scenarios. PDG can not calculate
the uplink duration. Therefor SW shall program the 'Extend_duration_value_bw...'
field
<enum 19 frameless_phyrx_response_accepted>Any MU frameless
reception generated by the PHY is acceptable.
PHY indicates this type of reception explicitly in TLV PHYRX_RSSI_LEGACY,
field Reception_type == reception_is_frameless
RXPCU will report any frame received, irrespective of it
having been UL MU or SU.
This can be used for complex MU-MIMO or OFDMA scenarios,
like receiving MU-CTS.
PDG can not calculate the uplink duration. Therefor SW shall
program the 'Extend_duration_value_bw...' field
<enum 20 ranging_ndp_and_lmr_expected>SW sets this after
sending ranging NDPA followed by NDP as an ISTA and NDP
and LMR (Action No Ack) are expected as back-to-back reception
in SIFS.
As PDG has no idea on how long the reception is going to
be, the reception time of the response will have to be
programmed by SW in the 'Extend_duration_value_bw...' field
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received.
<enum 21 ba_512_expected>BA with 512 bitmap is expected.
PDG DOES NOT use the size info to calculated response duration.
The length of the response will have to be programmed by
SW in the per-BW 'Expected_ppdu_resp_length' field.
For TXPCU only the fact that it is a BA is important. Actual
received BA size is not important
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received.
<enum 22 ba_1024_expected>BA with 1024 bitmap is expected.
PDG DOES NOT use the size info to calculated response duration.
The length of the response will have to be programmed by
SW in the per-BW 'Expected_ppdu_resp_length' field.
For TXPCU only the fact that it is a BA is important. Actual
received BA size is not important
RXPCU is just expecting any response. It is TXPCU who checks
that the right response was received.
<enum 23 ul_mu_ranging_cts2s_expected>When selected, CTS2S
frames are expected to be received in MU reception (uplink
OFDMA)
RXPCU shall check each response for CTS2S and report to
TXPCU.
TXPCU can check in the TLV 'RECEIVED_RESPONSE_INFO,' fields
'MU_Response_bitmap' and 'TB_Ranging_Resp' if indeed CTS2S
frames were received.
<enum 24 ul_mu_ranging_ndp_expected>When selected, UL NDP
frames are expected to be received in MU reception (uplink
spatial multiplexing)
RXPCU shall check each response for NDP and report to TXPCU.
TXPCU can check in the TLV 'RECEIVED_RESPONSE_INFO,' fields
'MU_Response_bitmap' and 'TB_Ranging_Resp' if indeed NDP
frames were received.
<enum 25 ul_mu_ranging_lmr_expected>When selected, LMR frames
are expected to be received in MU reception (uplink OFDMA
or uplink MIMO)
RXPCU shall check each response for LMR and report to TXPCU.
TXPCU can check in the TLV 'RECEIVED_RESPONSE_INFO,' fields
'MU_Response_bitmap' and 'TB_Ranging_Resp' if indeed LMR
frames were received.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TYPE_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_RESPONSE_TYPE_LSB 3
#define PCU_PPDU_SETUP_INIT_RESPONSE_TYPE_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TYPE_MASK 0x00000000000000f8
/* Description RESPONSE_INFO_PART2_REQUIRED
Field only valid when Response_type is NOT set to No_response_expected
When set to 1, RXPCU shall generate the RECEIVED_RESPONSE_INFO_PART2
TLV after having received the response frame. TXPCU shall
wait for this TLV before sending the TX_FES_STATUS_END
TLV.
When NOT set, RXPCU shall NOT generate the above mentioned
TLV. TXPCU shall not wait for this TLV and after having
received RECEIVED_RESPONSE_INFO TLV, it can immediately
generate the TX_FES_STATUS_END TLV.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_INFO_PART2_REQUIRED_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_RESPONSE_INFO_PART2_REQUIRED_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_INFO_PART2_REQUIRED_MSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_INFO_PART2_REQUIRED_MASK 0x0000000000000100
/* Description RESPONSE_TO_RESPONSE
Field indicates if after receiving an expected PPDU response
(as indicated by the Response_type), TXPCU is expected
to generate a reponse to that response
Example: OFDMA trigger frame is sent, with expected response
being UL OFDMA data, which result in a response to the
response of MBA
<enum 0 None> No response after response allowed.
<enum 1 SU_BA> The response after response that TXPCU is
allowed to generate is a single BA. Even if RXPCU is indicating
that multiple users are received, TXPCU shall only send
a BA for 1 STA. Response_to_response rates can be found
in fields 'response_to_response_rate_info_bw...'
<enum 2 MU_BA> The response after response that TXPCU is
allowed to generate is only Multi Destination Multi User
BA. Response_to_response rates can be found in fields 'response_to_response_rate_info_bw...'
<enum 3 RESPONSE_TO_RESPONSE_CMD> A response to response
is expected to be generated. In other words, RXPCU will
likely indicate to TXPCU at the end of upcoming reception
that a response is needed. TXPCU is however to ignore this
indication from RXPCU, and assume for a moment that no
response to response is needed, as all the details on how
to handle this is provided in the next scheduling command,
which is marked as a 'response_to_response' type.
<legal 0-3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_LSB 9
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_MSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_MASK 0x0000000000000e00
/* Description MBA_USER_ORDER
Field only valid in case of 'response_to_response' set to
MU_BA.
<enum 0 mu_ba_fixed_user_order> TXPCU shall ask RXPCU for
BA info for all TX users, in order from user 0 to user
N
<enum 1 mu_ba_optimized_user_order> TXPCU shall ask RXPCU
for BA info for all TX users, but let RXPCU determine in
which order the BA bitmaps for each user shall be returned.
Note that RXPCU might return some 'invalid' bitmaps in case
there was no data received from all the users.
<enum 2 mu_ba_fully_optimized> TXPCU shall ask RXPCU for
BA info for the number RX users that RXPCU indicated in
the 'Max_rx_user_count' in the RX_PPDU_START TLV. TXPCU
shall let RXPCU determine in which order the BA bitmaps
for each user shall be returned. Note that RXPCU might
still return some 'invalid' bitmaps in case there were only
frames with FCS errors for some of the users
<enum 3 mu_ba_fully_optimized_multi_tid> TXPCU shall ask
RXPCU for BA info for the number bitmaps that RXPCU indicated
in the (SUM of) response_ack_count, response_ba64_count,
response_ba256_count fields in RX_RESPONSE_REQUIRED. TXPCU
shall let RXPCU determine in which order the BA bitmaps
for each user (and sometimes multiple bitmaps for a the
same user in case of multi TID) shall be returned. It is
not expected that RXPCU will return invalid bitmaps for
this scenario as RXPCU earlier indicates that this number
of bitmaps was actually available in RXPCU...
<legal 0-3>
*/
#define PCU_PPDU_SETUP_INIT_MBA_USER_ORDER_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_MBA_USER_ORDER_LSB 12
#define PCU_PPDU_SETUP_INIT_MBA_USER_ORDER_MSB 13
#define PCU_PPDU_SETUP_INIT_MBA_USER_ORDER_MASK 0x0000000000003000
/* Description EXPECTED_MBA_SIZE
Field only valid for:
Mba_user_order == mu_ba_fixed_user_order, mu_ba_optimized_user_order
The expected number of bytes in response (Multi destination)
BA that TXPCU shall request to PDG.
NOTE that SW should have pre-calculated and thus looked-up
the window sizes for each of the STAs.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_EXPECTED_MBA_SIZE_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_EXPECTED_MBA_SIZE_LSB 14
#define PCU_PPDU_SETUP_INIT_EXPECTED_MBA_SIZE_MSB 24
#define PCU_PPDU_SETUP_INIT_EXPECTED_MBA_SIZE_MASK 0x0000000001ffc000
/* Description REQUIRED_UL_MU_RESP_USER_COUNT
Field only valid for: Response_to_response
== MU_BA
or
RESPONSE_TO_RESPONSE_CMD
Field MU_RX_successful_user_count as reported in the RECEIVED_RESPONSE_INFO
TLV shall be >= to this field, in order to consider the
reception successful.
Note that the value in this field shall always be equal
or smaller to the number of bits set in field MU_Response_expected_bitmap_....
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_REQUIRED_UL_MU_RESP_USER_COUNT_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_REQUIRED_UL_MU_RESP_USER_COUNT_LSB 25
#define PCU_PPDU_SETUP_INIT_REQUIRED_UL_MU_RESP_USER_COUNT_MSB 30
#define PCU_PPDU_SETUP_INIT_REQUIRED_UL_MU_RESP_USER_COUNT_MASK 0x000000007e000000
/* Description TRANSMITTED_BSSID_CHECK_EN
When set to 1, RXPCU shall assume group addressed frame
with Tx_AD2 equal to TBSSID was sent. RxPCU should properly
handle receive frame(s) from STA(s) which A1 is TBSSID
or any VAPs.When NOT set, RXPCU shall compare received frame's
A1 with Tx_AD2 only.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_TRANSMITTED_BSSID_CHECK_EN_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_TRANSMITTED_BSSID_CHECK_EN_LSB 31
#define PCU_PPDU_SETUP_INIT_TRANSMITTED_BSSID_CHECK_EN_MSB 31
#define PCU_PPDU_SETUP_INIT_TRANSMITTED_BSSID_CHECK_EN_MASK 0x0000000080000000
/* Description MPROT_REQUIRED_BW1
Field only valid when ppdu_allowed_bw1 is set.
When set, Medium protection transmission is required for
a 1 MHz bandwidth PPDU transmission. In case of MU transmissions,
all the medium protection settings are coming from user0. <legal
all>
*/
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW1_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW1_LSB 32
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW1_MSB 32
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW1_MASK 0x0000000100000000
/* Description MPROT_REQUIRED_BW20
Field only valid when ppdu_allowed_bw20_bw2 is set.
NOTE: This field is also known as Mprot_required_pattern_0
in case punctured transmission is enabled.
When set, Medium protection transmission is required for
a 20 MHz or 2Mhz 11ah bandwidth PPDU transmission
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW20_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW20_LSB 33
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW20_MSB 33
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW20_MASK 0x0000000200000000
/* Description MPROT_REQUIRED_BW40
Field only valid when ppdu_allowed_bw40_bw4 is set.
NOTE: This field is also known as Mprot_required_pattern_1
in case punctured transmission is enabled.
When set, Medium protection transmission is required for
a 40 MHz or 4Mhz 11ah bandwidth PPDU transmission
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW40_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW40_LSB 34
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW40_MSB 34
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW40_MASK 0x0000000400000000
/* Description MPROT_REQUIRED_BW80
Field only valid when ppdu_allowed_bw80_bw8 is set.
NOTE: This field is also known as Mprot_required_pattern_2
in case punctured transmission is enabled.
When set, Medium protection transmission is required for
a 80 MHz or 8MHz 11ah bandwidth PPDU transmission
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW80_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW80_LSB 35
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW80_MSB 35
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW80_MASK 0x0000000800000000
/* Description MPROT_REQUIRED_BW160
Field only valid when ppdu_allowed_bw160_bw16 is set.
NOTE: This field is also known as Mprot_required_pattern_3
in case punctured transmission is enabled.
When set, Medium protection transmission is required for
a 160 MHz or 16MHz 11ah bandwidth PPDU transmission.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW160_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW160_LSB 36
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW160_MSB 36
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW160_MASK 0x0000001000000000
/* Description MPROT_REQUIRED_BW240
Field only valid when ppdu_allowed_bw240 is set.
NOTE: This field is also known as Mprot_required_pattern_4
in case punctured transmission is enabled.
When set, Medium protection transmission is required for
a 240 MHz bandwidth PPDU transmission.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW240_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW240_LSB 37
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW240_MSB 37
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW240_MASK 0x0000002000000000
/* Description MPROT_REQUIRED_BW320
Field only valid when ppdu_allowed_bw320 is set.
NOTE: This field is also known as Mprot_required_pattern_5
in case punctured transmission is enabled.
When set, Medium protection transmission is required for
a 320 MHz bandwidth PPDU transmission.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW320_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW320_LSB 38
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW320_MSB 38
#define PCU_PPDU_SETUP_INIT_MPROT_REQUIRED_BW320_MASK 0x0000004000000000
/* Description PPDU_ALLOWED_BW1
When set, allow PPDU transmission with 1 MHz 11ah bandwidth.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW1_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW1_LSB 39
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW1_MSB 39
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW1_MASK 0x0000008000000000
/* Description PPDU_ALLOWED_BW20
Field Not valid in case punctured transmission is enabled.
This fields meaning is than taken over by field TX_PUNCTURE_SETUP.
puncture_pattern_count
When set, allow PPDU transmission with 20 MHz or 2MHz 11ah
bandwidth
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW20_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW20_LSB 40
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW20_MSB 40
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW20_MASK 0x0000010000000000
/* Description PPDU_ALLOWED_BW40
Field Not valid in case punctured transmission is enabled.
This fields meaning is than taken over by field TX_PUNCTURE_SETUP.
puncture_pattern_count
When set, allow PPDU transmission with 40 MHz or 4MHz 11ah
bandwidth
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW40_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW40_LSB 41
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW40_MSB 41
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW40_MASK 0x0000020000000000
/* Description PPDU_ALLOWED_BW80
Field Not valid in case punctured transmission is enabled.
This fields meaning is than taken over by field TX_PUNCTURE_SETUP.
puncture_pattern_count
When set, allow PPDU transmission with 80 MHz or 8MHz 11ah
bandwidth
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW80_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW80_LSB 42
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW80_MSB 42
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW80_MASK 0x0000040000000000
/* Description PPDU_ALLOWED_BW160
Field Not valid in case punctured transmission is enabled.
This fields meaning is than taken over by field TX_PUNCTURE_SETUP.
puncture_pattern_count
When set, allow PPDU transmission with 160 MHz or 16MHz
11ah bandwidth
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW160_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW160_LSB 43
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW160_MSB 43
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW160_MASK 0x0000080000000000
/* Description PPDU_ALLOWED_BW240
Field Not valid in case punctured transmission is enabled.
This fields meaning is than taken over by field TX_PUNCTURE_SETUP.
puncture_pattern_count
When set, allow PPDU transmission with 240 MHz bandwidth
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW240_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW240_LSB 44
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW240_MSB 44
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW240_MASK 0x0000100000000000
/* Description PPDU_ALLOWED_BW320
Field Not valid in case punctured transmission is enabled.
This fields meaning is than taken over by field TX_PUNCTURE_SETUP.
puncture_pattern_count
When set, allow PPDU transmission with 320 MHz bandwidth
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW320_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW320_LSB 45
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW320_MSB 45
#define PCU_PPDU_SETUP_INIT_PPDU_ALLOWED_BW320_MASK 0x0000200000000000
/* Description SET_FC_PWR_MGT
Field valid for SU transmissions only
When set, the TXPCU will set the power management bit in
the Frame Control field for the transmitted frames.
Note: this is there for backup purposes only. TXOLE is the
module now that should be setting the pm bit to the proper
value.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_SET_FC_PWR_MGT_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_SET_FC_PWR_MGT_LSB 46
#define PCU_PPDU_SETUP_INIT_SET_FC_PWR_MGT_MSB 46
#define PCU_PPDU_SETUP_INIT_SET_FC_PWR_MGT_MASK 0x0000400000000000
/* Description USE_CTS_DURATION_FOR_DATA_TX
When set, take the value of the duration field from the
CTS frame, and use this as the reference point for how long
the 'data' ppdu transmission can be.
This is an E2E feature.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_USE_CTS_DURATION_FOR_DATA_TX_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_USE_CTS_DURATION_FOR_DATA_TX_LSB 47
#define PCU_PPDU_SETUP_INIT_USE_CTS_DURATION_FOR_DATA_TX_MSB 47
#define PCU_PPDU_SETUP_INIT_USE_CTS_DURATION_FOR_DATA_TX_MASK 0x0000800000000000
/* Description UPDATE_TIMESTAMP_64
When set, TXPCU shall update the timestamp value at the
indicated location.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_UPDATE_TIMESTAMP_64_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_UPDATE_TIMESTAMP_64_LSB 48
#define PCU_PPDU_SETUP_INIT_UPDATE_TIMESTAMP_64_MSB 48
#define PCU_PPDU_SETUP_INIT_UPDATE_TIMESTAMP_64_MASK 0x0001000000000000
/* Description UPDATE_TIMESTAMP_32_LOWER
Update the 32 bit timestamp at the offset specified by the
insert_timestamp_offset_32. This will be used for AWDL
action frames. The value of the TSF will be added to the
timestamp field in the packet buffer in memory. The tx_delay
should also be included in the timestamp field<legal all>
*/
#define PCU_PPDU_SETUP_INIT_UPDATE_TIMESTAMP_32_LOWER_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_UPDATE_TIMESTAMP_32_LOWER_LSB 49
#define PCU_PPDU_SETUP_INIT_UPDATE_TIMESTAMP_32_LOWER_MSB 49
#define PCU_PPDU_SETUP_INIT_UPDATE_TIMESTAMP_32_LOWER_MASK 0x0002000000000000
/* Description UPDATE_TIMESTAMP_32_UPPER
Update the 64 bit TSF at the offset specified by the insert_timestamp_offset_64.
This will be used for beacons and probe response frames.
The value of the TSF will be added to the TSF field in
the packet buffer in memory. The tx_delay should also be
included in the TSF field
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_UPDATE_TIMESTAMP_32_UPPER_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_UPDATE_TIMESTAMP_32_UPPER_LSB 50
#define PCU_PPDU_SETUP_INIT_UPDATE_TIMESTAMP_32_UPPER_MSB 50
#define PCU_PPDU_SETUP_INIT_UPDATE_TIMESTAMP_32_UPPER_MASK 0x0004000000000000
/* Description RESERVED_1A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESERVED_1A_OFFSET 0x0000000000000000
#define PCU_PPDU_SETUP_INIT_RESERVED_1A_LSB 51
#define PCU_PPDU_SETUP_INIT_RESERVED_1A_MSB 63
#define PCU_PPDU_SETUP_INIT_RESERVED_1A_MASK 0xfff8000000000000
/* Description INSERT_TIMESTAMP_OFFSET_0
Byte offset to the first byte of the lower 32 bit timestamp
to be inserted. This is applicable to both beacon and
probe response TSF and the AWDL timestamp<legal all>
*/
#define PCU_PPDU_SETUP_INIT_INSERT_TIMESTAMP_OFFSET_0_OFFSET 0x0000000000000008
#define PCU_PPDU_SETUP_INIT_INSERT_TIMESTAMP_OFFSET_0_LSB 0
#define PCU_PPDU_SETUP_INIT_INSERT_TIMESTAMP_OFFSET_0_MSB 15
#define PCU_PPDU_SETUP_INIT_INSERT_TIMESTAMP_OFFSET_0_MASK 0x000000000000ffff
/* Description INSERT_TIMESTAMP_OFFSET_1
Byte offset to the first byte of the upper 32 bit timestamp
to be inserted. This is applicable to both beacon and
probe response TSF and the AWDL timestamp<legal all>
*/
#define PCU_PPDU_SETUP_INIT_INSERT_TIMESTAMP_OFFSET_1_OFFSET 0x0000000000000008
#define PCU_PPDU_SETUP_INIT_INSERT_TIMESTAMP_OFFSET_1_LSB 16
#define PCU_PPDU_SETUP_INIT_INSERT_TIMESTAMP_OFFSET_1_MSB 31
#define PCU_PPDU_SETUP_INIT_INSERT_TIMESTAMP_OFFSET_1_MASK 0x00000000ffff0000
/* Description MAX_BW40_TRY_COUNT
Field only valid when ppdu_allowed_bw40_bw4 or Mprot_required_bw40_bw4
is set.
NOTE: This field is also known as Max_try_count_pattern_1
in case punctured transmission is enabled.
The maximum number of times that TXPCU will try to do a
transmission at this or a higher BW, before deciding to
go to a lower BW.
If this count (as indicated by field Optimal_bw_retry_count
in TX_FES_SETUP) has not been reached yet, and this BW
is not available, TXPCU will generate a flush with flush
reason set to 'TXPCU_FLREQ_RETRY_FOR_OPTIMAL_BW.'
When value is 0, it means that if this BW is not available,
TXPCU should immediately try a lower BW.
Note that this value shall always be equal or greater then:
Max_bw80_try_count
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MAX_BW40_TRY_COUNT_OFFSET 0x0000000000000008
#define PCU_PPDU_SETUP_INIT_MAX_BW40_TRY_COUNT_LSB 32
#define PCU_PPDU_SETUP_INIT_MAX_BW40_TRY_COUNT_MSB 35
#define PCU_PPDU_SETUP_INIT_MAX_BW40_TRY_COUNT_MASK 0x0000000f00000000
/* Description MAX_BW80_TRY_COUNT
Field only valid when ppdu_allowed_bw80_bw4 or Mprot_required_bw80_bw4
is set.
NOTE: This field is also known as Max_try_count_pattern_2
in case punctured transmission is enabled.
The maximum number of times that TXPCU will try to do a
transmission at this or a higher BW, before deciding to
go to a lower BW.
If this count (as indicated by field Optimal_bw_retry_count
in TX_FES_SETUP) has not been reached yet, and this BW
is not available, TXPCU will generate a flush with flush
reason set to 'TXPCU_FLREQ_RETRY_FOR_OPTIMAL_BW.'
When value is 0, it means that if this BW is not available,
TXPCU should immediately try a lower BW.
Note that this value shall always be equal or greater then:
Max_bw160_try_count
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MAX_BW80_TRY_COUNT_OFFSET 0x0000000000000008
#define PCU_PPDU_SETUP_INIT_MAX_BW80_TRY_COUNT_LSB 36
#define PCU_PPDU_SETUP_INIT_MAX_BW80_TRY_COUNT_MSB 39
#define PCU_PPDU_SETUP_INIT_MAX_BW80_TRY_COUNT_MASK 0x000000f000000000
/* Description MAX_BW160_TRY_COUNT
Field only valid when ppdu_allowed_bw160_bw16 or Mprot_required_bw160_bw16
is set.
NOTE: This field is also known as Max_try_count_pattern_3
in case punctured transmission is enabled.
The maximum number of times that TXPCU will try to do a
transmission at this, before deciding to go to a lower BW.
If this count (as indicated by field Optimal_bw_retry_count
in TX_FES_SETUP) has not been reached yet, and this BW
is not available, TXPCU will generate a flush with flush
reason set to 'TXPCU_FLREQ_RETRY_FOR_OPTIMAL_BW.'
When value is 0, it means that if this BW is not available,
TXPCU should immediately try a lower BW.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MAX_BW160_TRY_COUNT_OFFSET 0x0000000000000008
#define PCU_PPDU_SETUP_INIT_MAX_BW160_TRY_COUNT_LSB 40
#define PCU_PPDU_SETUP_INIT_MAX_BW160_TRY_COUNT_MSB 43
#define PCU_PPDU_SETUP_INIT_MAX_BW160_TRY_COUNT_MASK 0x00000f0000000000
/* Description MAX_BW240_TRY_COUNT
Field only valid when ppdu_allowed_bw240 or Mprot_required_bw240
is set.
NOTE: This field is also known as Max_try_count_pattern_4
in case punctured transmission is enabled.
The maximum number of times that TXPCU will try to do a
transmission at this, before deciding to go to a lower BW.
If this count (as indicated by field Optimal_bw_retry_count
in TX_FES_SETUP) has not been reached yet, and this BW
is not available, TXPCU will generate a flush with flush
reason set to 'TXPCU_FLREQ_RETRY_FOR_OPTIMAL_BW.'
When value is 0, it means that if this BW is not available,
TXPCU should immediately try a lower BW.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MAX_BW240_TRY_COUNT_OFFSET 0x0000000000000008
#define PCU_PPDU_SETUP_INIT_MAX_BW240_TRY_COUNT_LSB 44
#define PCU_PPDU_SETUP_INIT_MAX_BW240_TRY_COUNT_MSB 47
#define PCU_PPDU_SETUP_INIT_MAX_BW240_TRY_COUNT_MASK 0x0000f00000000000
/* Description MAX_BW320_TRY_COUNT
Field only valid when ppdu_allowed_bw320 or Mprot_required_bw320
is set.
NOTE: This field is also known as Max_try_count_pattern_5
in case punctured transmission is enabled.
The maximum number of times that TXPCU will try to do a
transmission at this, before deciding to go to a lower BW.
If this count (as indicated by field Optimal_bw_retry_count
in TX_FES_SETUP) has not been reached yet, and this BW
is not available, TXPCU will generate a flush with flush
reason set to 'TXPCU_FLREQ_RETRY_FOR_OPTIMAL_BW.'
When value is 0, it means that if this BW is not available,
TXPCU should immediately try a lower BW.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MAX_BW320_TRY_COUNT_OFFSET 0x0000000000000008
#define PCU_PPDU_SETUP_INIT_MAX_BW320_TRY_COUNT_LSB 48
#define PCU_PPDU_SETUP_INIT_MAX_BW320_TRY_COUNT_MSB 51
#define PCU_PPDU_SETUP_INIT_MAX_BW320_TRY_COUNT_MASK 0x000f000000000000
/* Description INSERT_WUR_TIMESTAMP_OFFSET
Field only to be used in case PCU_PPDU_SETUP_START.pkt_type
indicates a .11ba packet
Used by TXPCU to determine the offset within a WUR packet,
e.g. a WUR beacon into which to insert the timestamp.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_INSERT_WUR_TIMESTAMP_OFFSET_OFFSET 0x0000000000000008
#define PCU_PPDU_SETUP_INIT_INSERT_WUR_TIMESTAMP_OFFSET_LSB 52
#define PCU_PPDU_SETUP_INIT_INSERT_WUR_TIMESTAMP_OFFSET_MSB 57
#define PCU_PPDU_SETUP_INIT_INSERT_WUR_TIMESTAMP_OFFSET_MASK 0x03f0000000000000
/* Description UPDATE_WUR_TIMESTAMP
Field only to be used in case PCU_PPDU_SETUP_START.pkt_type
indicates a .11ba packet
TXPCU will insert the timestamp into a WUR packet if this
bit is set.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_UPDATE_WUR_TIMESTAMP_OFFSET 0x0000000000000008
#define PCU_PPDU_SETUP_INIT_UPDATE_WUR_TIMESTAMP_LSB 58
#define PCU_PPDU_SETUP_INIT_UPDATE_WUR_TIMESTAMP_MSB 58
#define PCU_PPDU_SETUP_INIT_UPDATE_WUR_TIMESTAMP_MASK 0x0400000000000000
/* Description WUR_EMBEDDED_BSSID_PRESENT
Field only to be used in case PCU_PPDU_SETUP_START.pkt_type
indicates a .11ba packet
If this bit is set, TXPCU will assume the packet includes
an extra 16 bits which contain the embedded BSSID to be
used in the WUR FCS calculation. TXPCU will replace the
16 bits with the 16-bit FCS field.
If this bit is clear, TXPCU will append the 16-bit FCS calculated
without any embedded BSSID.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_WUR_EMBEDDED_BSSID_PRESENT_OFFSET 0x0000000000000008
#define PCU_PPDU_SETUP_INIT_WUR_EMBEDDED_BSSID_PRESENT_LSB 59
#define PCU_PPDU_SETUP_INIT_WUR_EMBEDDED_BSSID_PRESENT_MSB 59
#define PCU_PPDU_SETUP_INIT_WUR_EMBEDDED_BSSID_PRESENT_MASK 0x0800000000000000
/* Description INSERT_WUR_FCS
Field only to be used in case PCU_PPDU_SETUP_START.pkt_type
indicates a .11ba packet
TXPCU will replace/append the FCS bytes for a WUR packet
if this bit is set. The replace/append choice is based
on WUR_embedded_BSSID_present.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_INSERT_WUR_FCS_OFFSET 0x0000000000000008
#define PCU_PPDU_SETUP_INIT_INSERT_WUR_FCS_LSB 60
#define PCU_PPDU_SETUP_INIT_INSERT_WUR_FCS_MSB 60
#define PCU_PPDU_SETUP_INIT_INSERT_WUR_FCS_MASK 0x1000000000000000
/* Description RESERVED_3B
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESERVED_3B_OFFSET 0x0000000000000008
#define PCU_PPDU_SETUP_INIT_RESERVED_3B_LSB 61
#define PCU_PPDU_SETUP_INIT_RESERVED_3B_MSB 63
#define PCU_PPDU_SETUP_INIT_RESERVED_3B_MASK 0xe000000000000000
/* Description RESPONSE_TO_RESPONSE_RATE_INFO_BW20
Field only valid in case of Response_to_response set to
SU_BA or MU_BA
NOTE: This field is also known as response_to_response_rate_info_pattern_0
in case punctured transmission is enabled.
Used by TXPCU to determine what the transmit rates are for
the response to response transmission in case original
transmission was 20 MHz.
Note:
see field R2R_bw20_active_channel for the BW of this transmission
*/
/* Description RESERVED_0A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_0A_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_0A_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_0A_MSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_0A_MASK 0x0000000000000001
/* Description TX_ANTENNA_SECTOR_CTRL
Sectored transmit antenna
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_ANTENNA_SECTOR_CTRL_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_ANTENNA_SECTOR_CTRL_LSB 1
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_ANTENNA_SECTOR_CTRL_MSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_ANTENNA_SECTOR_CTRL_MASK 0x0000000001fffffe
/* Description PKT_TYPE
Packet type:
<enum 0 dot11a>802.11a PPDU type
<enum 1 dot11b>802.11b PPDU type
<enum 2 dot11n_mm>802.11n Mixed Mode PPDU type
<enum 3 dot11ac>802.11ac PPDU type
<enum 4 dot11ax>802.11ax PPDU type
<enum 5 dot11ba>802.11ba (WUR) PPDU type
<enum 6 dot11be>802.11be PPDU type
<enum 7 dot11az>802.11az (ranging) PPDU type
<enum 8 dot11n_gf>802.11n Green Field PPDU type (unsupported
& aborted)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_PKT_TYPE_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_PKT_TYPE_LSB 25
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_PKT_TYPE_MSB 28
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_PKT_TYPE_MASK 0x000000001e000000
/* Description SMOOTHING
This field is used by PDG to populate the SMOOTHING filed
in the SIG Preamble of the PPDU
<legal 0-1>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_SMOOTHING_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_SMOOTHING_LSB 29
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_SMOOTHING_MSB 29
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_SMOOTHING_MASK 0x0000000020000000
/* Description LDPC
When set, use LDPC transmission rates
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_LDPC_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_LDPC_LSB 30
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_LDPC_MSB 30
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_LDPC_MASK 0x0000000040000000
/* Description STBC
When set, use STBC transmission rates
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_STBC_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_STBC_LSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_STBC_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_STBC_MASK 0x0000000080000000
/* Description ALT_TX_PWR
Coex related AlternativeTransmit parameter
Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_TX_PWR_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_TX_PWR_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_TX_PWR_MSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_TX_PWR_MASK 0x000000ff00000000
/* Description ALT_MIN_TX_PWR
Coex related Alternative Transmit parameter
Minimum allowed Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_MIN_TX_PWR_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_MIN_TX_PWR_LSB 40
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_MIN_TX_PWR_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_MIN_TX_PWR_MASK 0x0000ff0000000000
/* Description ALT_NSS
Coex related Alternative Transmit parameter
Number of spatial streams.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_NSS_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_NSS_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_NSS_MSB 50
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_NSS_MASK 0x0007000000000000
/* Description ALT_TX_CHAIN_MASK
Coex related Alternative Transmit parameter
Chain mask to support up to 8 antennas.
<legal 1-255>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_TX_CHAIN_MASK_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_TX_CHAIN_MASK_LSB 51
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_TX_CHAIN_MASK_MSB 58
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_TX_CHAIN_MASK_MASK 0x07f8000000000000
/* Description ALT_BW
Coex related Alternative Transmit parameter
The BW of the upcoming transmission.
<enum 0 20_mhz>20 Mhz BW
<enum 1 40_mhz>40 Mhz BW
<enum 2 80_mhz>80 Mhz BW
<enum 3 160_mhz>160 Mhz BW
<enum 4 320_mhz>320 Mhz BW
<enum 5 240_mhz>240 Mhz BW
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_BW_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_BW_LSB 59
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_BW_MSB 61
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_BW_MASK 0x3800000000000000
/* Description STF_LTF_3DB_BOOST
Boost the STF and LTF power by 3dB in 11a/n/ac packets.
This includes both the legacy preambles and the HT/VHT preambles.0:
disable power boost1: enable power boost
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_STF_LTF_3DB_BOOST_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_STF_LTF_3DB_BOOST_LSB 62
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_STF_LTF_3DB_BOOST_MSB 62
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_STF_LTF_3DB_BOOST_MASK 0x4000000000000000
/* Description FORCE_EXTRA_SYMBOL
Set to 1 to force an extra OFDM symbol (or symbols) even
if the PPDU encoding process does not result in an extra
OFDM symbol (or symbols)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_FORCE_EXTRA_SYMBOL_OFFSET 0x0000000000000010
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_FORCE_EXTRA_SYMBOL_LSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_FORCE_EXTRA_SYMBOL_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_FORCE_EXTRA_SYMBOL_MASK 0x8000000000000000
/* Description ALT_RATE_MCS
Coex related Alternative Transmit parameter
For details, refer to MCS_TYPE
Note: This is "rate" in case of 11a/11b
description
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_RATE_MCS_OFFSET 0x0000000000000018
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_RATE_MCS_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_RATE_MCS_MSB 3
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_RATE_MCS_MASK 0x000000000000000f
/* Description NSS
Number of spatial streams.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_NSS_OFFSET 0x0000000000000018
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_NSS_LSB 4
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_NSS_MSB 6
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_NSS_MASK 0x0000000000000070
/* Description DPD_ENABLE
DPD enable control
This is needed on a per packet basis
<enum 0 dpd_off> DPD profile not applied to current
packet
<enum 1 dpd_on> DPD profile applied to current packet
if available
<legal 0-1>
This field is not applicable in11ah mode of operation and
is ignored by the HW
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DPD_ENABLE_OFFSET 0x0000000000000018
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DPD_ENABLE_LSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DPD_ENABLE_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DPD_ENABLE_MASK 0x0000000000000080
/* Description TX_PWR
Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_PWR_OFFSET 0x0000000000000018
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_PWR_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_PWR_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_PWR_MASK 0x000000000000ff00
/* Description MIN_TX_PWR
Coex related field:
Minimum allowed Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MIN_TX_PWR_OFFSET 0x0000000000000018
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MIN_TX_PWR_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MIN_TX_PWR_MSB 23
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MIN_TX_PWR_MASK 0x0000000000ff0000
/* Description TX_CHAIN_MASK
Chain mask to support up to 8 antennas.
<legal 1-255>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_CHAIN_MASK_OFFSET 0x0000000000000018
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_CHAIN_MASK_LSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_CHAIN_MASK_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_CHAIN_MASK_MASK 0x00000000ff000000
/* Description RESERVED_3A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_3A_OFFSET 0x0000000000000018
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_3A_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_3A_MSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_3A_MASK 0x000000ff00000000
/* Description SGI
Field only valid when pkt type is HT or VHT.For 11ax see
field Dot11ax_CP_LTF_size
<enum 0 0_8_us_sgi > Legacy normal GI. Can also be used
for HE
<enum 1 0_4_us_sgi > Legacy short GI. Can also be used
for HE
<enum 2 1_6_us_sgi > Not used for pre 11ax pkt_types.
<enum 3 3_2_us_sgi > Not used for pre 11ax pkt_types
<legal 0 - 3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_SGI_OFFSET 0x0000000000000018
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_SGI_LSB 40
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_SGI_MSB 41
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_SGI_MASK 0x0000030000000000
/* Description RATE_MCS
For details, refer to MCS_TYPE description
Note: This is "rate" in case of 11a/11b
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RATE_MCS_OFFSET 0x0000000000000018
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RATE_MCS_LSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RATE_MCS_MSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RATE_MCS_MASK 0x00003c0000000000
/* Description RESERVED_3B
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_3B_OFFSET 0x0000000000000018
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_3B_LSB 46
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_3B_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_3B_MASK 0x0000c00000000000
/* Description TX_PWR_1
Default (desired) transmit parameter for the second chain
Transmit Power in s6.2 format.
In units of 0.25 dBm
Note that there is no Min value for this
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_PWR_1_OFFSET 0x0000000000000018
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_PWR_1_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_PWR_1_MSB 55
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_TX_PWR_1_MASK 0x00ff000000000000
/* Description ALT_TX_PWR_1
Alternate (desired) transmit parameter for the second chain
Transmit Power in s6.2 format.
In units of 0.25 dBm
Note that there is no Min value for this
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_TX_PWR_1_OFFSET 0x0000000000000018
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_TX_PWR_1_LSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_TX_PWR_1_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_ALT_TX_PWR_1_MASK 0xff00000000000000
/* Description AGGREGATION
Field only valid in case of pkt_type == 11n
<enum 0 mpdu> Indicates MPDU format. TXPCU will select
this setting if the CBF response only contains a single
segment
<enum 1 a_mpdu> Indicates A-MPDU format. TXPCU will
select this setting if the CBF response will contain two
or more segments
<legal 0-1>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_AGGREGATION_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_AGGREGATION_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_AGGREGATION_MSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_AGGREGATION_MASK 0x0000000000000001
/* Description DOT11AX_BSS_COLOR_ID
BSS color of the nextwork to which this STA belongs.
When generated by TXPCU, this field is set equal to: Dot11ax_received_Bss_color_id
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_BSS_COLOR_ID_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_BSS_COLOR_ID_LSB 1
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_BSS_COLOR_ID_MSB 6
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_BSS_COLOR_ID_MASK 0x000000000000007e
/* Description DOT11AX_SPATIAL_REUSE
This field is only valid for pkt_type == 11ax
Spatial re-use
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_SPATIAL_REUSE_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_SPATIAL_REUSE_LSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_SPATIAL_REUSE_MSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_SPATIAL_REUSE_MASK 0x0000000000000780
/* Description DOT11AX_CP_LTF_SIZE
field is only valid for pkt_type == 11ax
Indicates the CP and HE-LTF type
<enum 0 OneX_LTF_0_8CP> 1xLTF + 0.8 us CP
<enum 1 TwoX_LTF_0_8CP> 2x LTF + 0.8 µs CP
<enum 2 TwoX_LTF_1_6CP> 2x LTF + 1.6 µs CP
<enum 3 FourX_LTF_0_8CP_3_2CP>
When DCM == 0 OR STBC == 0: 4x LTF + 3.2 µs CP
When DCM == 1 AND STBC == 1: 4x LTF + 0.8 µs CP. Note:
In this scenario, Neither DCM nor STBC is applied to HE
data field.
If ( DCM == 1 ) and ( MCS > 0 ) and (STBC == 0)
0 = 1xLTF + 0.4 usec
1 = 2xLTF + 0.4 usec
2~3 = Reserved
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_CP_LTF_SIZE_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_CP_LTF_SIZE_LSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_CP_LTF_SIZE_MSB 12
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_CP_LTF_SIZE_MASK 0x0000000000001800
/* Description DOT11AX_DCM
field is only valid for pkt_type == 11ax
Indicates whether dual sub-carrier modulation is applied
0: No DCM
1:DCM
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_DCM_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_DCM_LSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_DCM_MSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_DCM_MASK 0x0000000000002000
/* Description DOT11AX_DOPPLER_INDICATION
field is only valid for pkt_type == 11ax
0: No Doppler support
1: Doppler support
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_DOPPLER_INDICATION_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_DOPPLER_INDICATION_LSB 14
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_DOPPLER_INDICATION_MSB 14
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_DOPPLER_INDICATION_MASK 0x0000000000004000
/* Description DOT11AX_SU_EXTENDED
field is only valid for pkt_type == 11ax OR pkt_type ==
11be
When set, the 11ax or 11be frame is of the extended range
format
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_SU_EXTENDED_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_SU_EXTENDED_LSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_SU_EXTENDED_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_SU_EXTENDED_MASK 0x0000000000008000
/* Description DOT11AX_MIN_PACKET_EXTENSION
field is only valid for pkt_type == 11ax OR pkt_type ==
11be
The min packet extension duration for this user.
0: no extension
1: 8us
2: 16 us
3: 20 us (only for .11be)
<legal 0-3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_MIN_PACKET_EXTENSION_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_MIN_PACKET_EXTENSION_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_MIN_PACKET_EXTENSION_MSB 17
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_MIN_PACKET_EXTENSION_MASK 0x0000000000030000
/* Description DOT11AX_PE_NSS
Number of active spatial streams during packet extension.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_NSS_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_NSS_LSB 18
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_NSS_MSB 20
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_NSS_MASK 0x00000000001c0000
/* Description DOT11AX_PE_CONTENT
Content of packet extension. Valid for all 11ax packets
having packet extension
0-he_ltf, 1-last_data_symbol
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_CONTENT_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_CONTENT_LSB 21
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_CONTENT_MSB 21
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_CONTENT_MASK 0x0000000000200000
/* Description DOT11AX_PE_LTF_SIZE
LTF size to be used during packet extention. . This field
is valid for both FTM and non-FTM packets.
0-1x
1-2x (unsupported un HWK-1)
2-4x (unsupported un HWK-1)
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_LTF_SIZE_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_LTF_SIZE_LSB 22
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_LTF_SIZE_MSB 23
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_LTF_SIZE_MASK 0x0000000000c00000
/* Description DOT11AX_CHAIN_CSD_EN
This field denotes whether to apply CSD on the preamble
and data portion of the packet. This field is valid for
all transmit packets
0: disable per-chain csd
1: enable per-chain csd
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_CHAIN_CSD_EN_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_CHAIN_CSD_EN_LSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_CHAIN_CSD_EN_MSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_CHAIN_CSD_EN_MASK 0x0000000001000000
/* Description DOT11AX_PE_CHAIN_CSD_EN
This field denotes whether to apply CSD on the packet extension
portion of the packet. This field is valid for all 11ax
packets.
0: disable per-chain csd
1: enable per-chain csd
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_CHAIN_CSD_EN_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_CHAIN_CSD_EN_LSB 25
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_CHAIN_CSD_EN_MSB 25
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_PE_CHAIN_CSD_EN_MASK 0x0000000002000000
/* Description DOT11AX_DL_UL_FLAG
field is only valid for pkt_type == 11ax
<enum 0 DL_UL_FLAG_IS_DL_OR_TDLS>
<enum 1 DL_UL_FLAG_IS_UL>
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_DL_UL_FLAG_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_DL_UL_FLAG_LSB 26
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_DL_UL_FLAG_MSB 26
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_DL_UL_FLAG_MASK 0x0000000004000000
/* Description RESERVED_4A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_4A_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_4A_LSB 27
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_4A_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_4A_MASK 0x00000000f8000000
/* Description DOT11AX_EXT_RU_START_INDEX
field is only valid for pkt_type == 11ax and Dot11ax_su_extended
== 1
RU Number to which User is assigned
The RU numbering bitwidth is only enough to cover the 20MHz
BW that extended range allows
<legal 0-8>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_EXT_RU_START_INDEX_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_EXT_RU_START_INDEX_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_EXT_RU_START_INDEX_MSB 35
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_EXT_RU_START_INDEX_MASK 0x0000000f00000000
/* Description DOT11AX_EXT_RU_SIZE
field is only valid for pkt_type == 11ax and Dot11ax_su_extended
== 1 or pkt_type == 11be and EHT_duplicate_mode == 1
The size of the RU for this user.
In case of EHT duplicate transmissions, this field indicates
the width of the actual content before duplication, e.g.
a 40 MHz PPDU duplicated to 160 MHz will have the bandwidth
fields indicating 160 MHz and this field set to e-num 4
(RU_484).
<enum 0 RU_26>
<enum 1 RU_52>
<enum 2 RU_106>
<enum 3 RU_242>
<enum 4 RU_484>
<enum 5 RU_996>
<enum 6 RU_1992>
<enum 7 RU_FULLBW> Set when the RU occupies the full packet
bandwidth
<enum 8 RU_FULLBW_240> Set when the RU occupies the full
packet bandwidth
<enum 9 RU_FULLBW_320> Set when the RU occupies the full
packet bandwidth
<enum 10 RU_MULTI_LARGE> DO NOT USE
<enum 11 RU_78> DO NOT USE
<enum 12 RU_132> DO NOT USE
<legal 0-12>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_EXT_RU_SIZE_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_EXT_RU_SIZE_LSB 36
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_EXT_RU_SIZE_MSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11AX_EXT_RU_SIZE_MASK 0x000000f000000000
/* Description EHT_DUPLICATE_MODE
Field only valid for pkt_type == 11be
Indicates EHT duplicate modulation
<enum 0 eht_no_duplicate>
<enum 1 eht_2x_duplicate>
<enum 2 eht_4x_duplicate>
<legal 0-2>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_EHT_DUPLICATE_MODE_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_EHT_DUPLICATE_MODE_LSB 40
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_EHT_DUPLICATE_MODE_MSB 41
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_EHT_DUPLICATE_MODE_MASK 0x0000030000000000
/* Description HE_SIGB_DCM
Indicates whether dual sub-carrier modulation is applied
to EHT-SIG
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_HE_SIGB_DCM_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_HE_SIGB_DCM_LSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_HE_SIGB_DCM_MSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_HE_SIGB_DCM_MASK 0x0000040000000000
/* Description HE_SIGB_0_MCS
Indicates the MCS of EHT-SIG
For details, refer to MCS_TYPE description
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_HE_SIGB_0_MCS_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_HE_SIGB_0_MCS_LSB 43
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_HE_SIGB_0_MCS_MSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_HE_SIGB_0_MCS_MASK 0x0000380000000000
/* Description NUM_HE_SIGB_SYM
Indicates the number of EHT-SIG symbols
This field is 0-based with 0 indicating that 1 eht_sig symbol
needs to be transmitted.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_NUM_HE_SIGB_SYM_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_NUM_HE_SIGB_SYM_LSB 46
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_NUM_HE_SIGB_SYM_MSB 50
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_NUM_HE_SIGB_SYM_MASK 0x0007c00000000000
/* Description REQUIRED_RESPONSE_TIME_SOURCE
<enum 0 reqd_resp_time_src_is_RXPCU> Typically from received
HT Control for sync MLO response
<enum 1 reqd_resp_time_src_is_FW>
Typically from 'PCU_PPDU_SETUP_INIT' for sync MLO response
to response
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_REQUIRED_RESPONSE_TIME_SOURCE_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_REQUIRED_RESPONSE_TIME_SOURCE_LSB 51
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_REQUIRED_RESPONSE_TIME_SOURCE_MSB 51
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_REQUIRED_RESPONSE_TIME_SOURCE_MASK 0x0008000000000000
/* Description RESERVED_5A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_5A_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_5A_LSB 52
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_5A_MSB 57
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_RESERVED_5A_MASK 0x03f0000000000000
/* Description U_SIG_PUNCTURE_PATTERN_ENCODING
6-bit value copied from 'RX_RESPONSE_REQUIRED_INFO' and 'TX_CBF_INFO'
to pass on to PDG
<legal 0-29>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_U_SIG_PUNCTURE_PATTERN_ENCODING_OFFSET 0x0000000000000020
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_U_SIG_PUNCTURE_PATTERN_ENCODING_LSB 58
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_U_SIG_PUNCTURE_PATTERN_ENCODING_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_U_SIG_PUNCTURE_PATTERN_ENCODING_MASK 0xfc00000000000000
/* Description MLO_STA_ID_DETAILS_RX
16-bi value copied from 'RX_RESPONSE_REQUIRED_INFO' to pass
on to PDG
Bits 10 and 11 are not valid, bits [9:0] reflect 'NSTR_MLO_STA_ID'
from address search.
See definition of mlo_sta_id_details.
*/
/* Description NSTR_MLO_STA_ID
ID of peer participating in non-STR MLO
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MSB 9
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MASK 0x00000000000003ff
/* Description BLOCK_SELF_ML_SYNC
Only valid for TX
When set, this provides an indication to block the peer
for self-link.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_LSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MASK 0x0000000000000400
/* Description BLOCK_PARTNER_ML_SYNC
Only valid for TX
When set, this provides an indication to block the peer
for partner links.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_LSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MASK 0x0000000000000800
/* Description NSTR_MLO_STA_ID_VALID
All the fields in this TLV are valid only if this bit is
set.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_LSB 12
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MSB 12
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MASK 0x0000000000001000
/* Description RESERVED_0A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_RESERVED_0A_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_RESERVED_0A_LSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MASK 0x000000000000e000
/* Description REQUIRED_RESPONSE_TIME
When non-zero, indicates that PDG shall pad the response
transmission to the indicated duration (in us)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_REQUIRED_RESPONSE_TIME_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_REQUIRED_RESPONSE_TIME_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_REQUIRED_RESPONSE_TIME_MSB 27
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_REQUIRED_RESPONSE_TIME_MASK 0x000000000fff0000
/* Description DOT11BE_PARAMS_PLACEHOLDER
4 bytes for use as placeholders for 'Dot11be_*' parameters
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11BE_PARAMS_PLACEHOLDER_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11BE_PARAMS_PLACEHOLDER_LSB 28
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11BE_PARAMS_PLACEHOLDER_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW20_DOT11BE_PARAMS_PLACEHOLDER_MASK 0x00000000f0000000
/* Description RESPONSE_TO_RESPONSE_RATE_INFO_BW40
Field only valid in case of Response_to_response set to
SU_BA or MU_BA
NOTE: This field is also known as response_to_response_rate_info_pattern_1
in case punctured transmission is enabled.
Used by TXPCU to determine what the transmit rates are for
the response to response transmission in case original
transmission was 40 MHz.
Note:
see field R2R_bw40_active_channel for the BW of this transmission
*/
/* Description RESERVED_0A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_0A_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_0A_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_0A_MSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_0A_MASK 0x0000000100000000
/* Description TX_ANTENNA_SECTOR_CTRL
Sectored transmit antenna
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_ANTENNA_SECTOR_CTRL_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_ANTENNA_SECTOR_CTRL_LSB 33
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_ANTENNA_SECTOR_CTRL_MSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_ANTENNA_SECTOR_CTRL_MASK 0x01fffffe00000000
/* Description PKT_TYPE
Packet type:
<enum 0 dot11a>802.11a PPDU type
<enum 1 dot11b>802.11b PPDU type
<enum 2 dot11n_mm>802.11n Mixed Mode PPDU type
<enum 3 dot11ac>802.11ac PPDU type
<enum 4 dot11ax>802.11ax PPDU type
<enum 5 dot11ba>802.11ba (WUR) PPDU type
<enum 6 dot11be>802.11be PPDU type
<enum 7 dot11az>802.11az (ranging) PPDU type
<enum 8 dot11n_gf>802.11n Green Field PPDU type (unsupported
& aborted)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_PKT_TYPE_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_PKT_TYPE_LSB 57
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_PKT_TYPE_MSB 60
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_PKT_TYPE_MASK 0x1e00000000000000
/* Description SMOOTHING
This field is used by PDG to populate the SMOOTHING filed
in the SIG Preamble of the PPDU
<legal 0-1>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_SMOOTHING_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_SMOOTHING_LSB 61
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_SMOOTHING_MSB 61
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_SMOOTHING_MASK 0x2000000000000000
/* Description LDPC
When set, use LDPC transmission rates
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_LDPC_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_LDPC_LSB 62
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_LDPC_MSB 62
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_LDPC_MASK 0x4000000000000000
/* Description STBC
When set, use STBC transmission rates
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_STBC_OFFSET 0x0000000000000028
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_STBC_LSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_STBC_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_STBC_MASK 0x8000000000000000
/* Description ALT_TX_PWR
Coex related AlternativeTransmit parameter
Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_TX_PWR_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_TX_PWR_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_TX_PWR_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_TX_PWR_MASK 0x00000000000000ff
/* Description ALT_MIN_TX_PWR
Coex related Alternative Transmit parameter
Minimum allowed Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_MIN_TX_PWR_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_MIN_TX_PWR_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_MIN_TX_PWR_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_MIN_TX_PWR_MASK 0x000000000000ff00
/* Description ALT_NSS
Coex related Alternative Transmit parameter
Number of spatial streams.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_NSS_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_NSS_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_NSS_MSB 18
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_NSS_MASK 0x0000000000070000
/* Description ALT_TX_CHAIN_MASK
Coex related Alternative Transmit parameter
Chain mask to support up to 8 antennas.
<legal 1-255>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_TX_CHAIN_MASK_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_TX_CHAIN_MASK_LSB 19
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_TX_CHAIN_MASK_MSB 26
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_TX_CHAIN_MASK_MASK 0x0000000007f80000
/* Description ALT_BW
Coex related Alternative Transmit parameter
The BW of the upcoming transmission.
<enum 0 20_mhz>20 Mhz BW
<enum 1 40_mhz>40 Mhz BW
<enum 2 80_mhz>80 Mhz BW
<enum 3 160_mhz>160 Mhz BW
<enum 4 320_mhz>320 Mhz BW
<enum 5 240_mhz>240 Mhz BW
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_BW_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_BW_LSB 27
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_BW_MSB 29
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_BW_MASK 0x0000000038000000
/* Description STF_LTF_3DB_BOOST
Boost the STF and LTF power by 3dB in 11a/n/ac packets.
This includes both the legacy preambles and the HT/VHT preambles.0:
disable power boost1: enable power boost
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_STF_LTF_3DB_BOOST_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_STF_LTF_3DB_BOOST_LSB 30
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_STF_LTF_3DB_BOOST_MSB 30
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_STF_LTF_3DB_BOOST_MASK 0x0000000040000000
/* Description FORCE_EXTRA_SYMBOL
Set to 1 to force an extra OFDM symbol (or symbols) even
if the PPDU encoding process does not result in an extra
OFDM symbol (or symbols)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_FORCE_EXTRA_SYMBOL_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_FORCE_EXTRA_SYMBOL_LSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_FORCE_EXTRA_SYMBOL_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_FORCE_EXTRA_SYMBOL_MASK 0x0000000080000000
/* Description ALT_RATE_MCS
Coex related Alternative Transmit parameter
For details, refer to MCS_TYPE
Note: This is "rate" in case of 11a/11b
description
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_RATE_MCS_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_RATE_MCS_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_RATE_MCS_MSB 35
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_RATE_MCS_MASK 0x0000000f00000000
/* Description NSS
Number of spatial streams.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_NSS_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_NSS_LSB 36
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_NSS_MSB 38
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_NSS_MASK 0x0000007000000000
/* Description DPD_ENABLE
DPD enable control
This is needed on a per packet basis
<enum 0 dpd_off> DPD profile not applied to current
packet
<enum 1 dpd_on> DPD profile applied to current packet
if available
<legal 0-1>
This field is not applicable in11ah mode of operation and
is ignored by the HW
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DPD_ENABLE_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DPD_ENABLE_LSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DPD_ENABLE_MSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DPD_ENABLE_MASK 0x0000008000000000
/* Description TX_PWR
Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_PWR_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_PWR_LSB 40
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_PWR_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_PWR_MASK 0x0000ff0000000000
/* Description MIN_TX_PWR
Coex related field:
Minimum allowed Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MIN_TX_PWR_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MIN_TX_PWR_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MIN_TX_PWR_MSB 55
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MIN_TX_PWR_MASK 0x00ff000000000000
/* Description TX_CHAIN_MASK
Chain mask to support up to 8 antennas.
<legal 1-255>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_CHAIN_MASK_OFFSET 0x0000000000000030
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_CHAIN_MASK_LSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_CHAIN_MASK_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_CHAIN_MASK_MASK 0xff00000000000000
/* Description RESERVED_3A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_3A_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_3A_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_3A_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_3A_MASK 0x00000000000000ff
/* Description SGI
Field only valid when pkt type is HT or VHT.For 11ax see
field Dot11ax_CP_LTF_size
<enum 0 0_8_us_sgi > Legacy normal GI. Can also be used
for HE
<enum 1 0_4_us_sgi > Legacy short GI. Can also be used
for HE
<enum 2 1_6_us_sgi > Not used for pre 11ax pkt_types.
<enum 3 3_2_us_sgi > Not used for pre 11ax pkt_types
<legal 0 - 3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_SGI_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_SGI_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_SGI_MSB 9
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_SGI_MASK 0x0000000000000300
/* Description RATE_MCS
For details, refer to MCS_TYPE description
Note: This is "rate" in case of 11a/11b
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RATE_MCS_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RATE_MCS_LSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RATE_MCS_MSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RATE_MCS_MASK 0x0000000000003c00
/* Description RESERVED_3B
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_3B_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_3B_LSB 14
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_3B_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_3B_MASK 0x000000000000c000
/* Description TX_PWR_1
Default (desired) transmit parameter for the second chain
Transmit Power in s6.2 format.
In units of 0.25 dBm
Note that there is no Min value for this
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_PWR_1_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_PWR_1_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_PWR_1_MSB 23
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_TX_PWR_1_MASK 0x0000000000ff0000
/* Description ALT_TX_PWR_1
Alternate (desired) transmit parameter for the second chain
Transmit Power in s6.2 format.
In units of 0.25 dBm
Note that there is no Min value for this
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_TX_PWR_1_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_TX_PWR_1_LSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_TX_PWR_1_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_ALT_TX_PWR_1_MASK 0x00000000ff000000
/* Description AGGREGATION
Field only valid in case of pkt_type == 11n
<enum 0 mpdu> Indicates MPDU format. TXPCU will select
this setting if the CBF response only contains a single
segment
<enum 1 a_mpdu> Indicates A-MPDU format. TXPCU will
select this setting if the CBF response will contain two
or more segments
<legal 0-1>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_AGGREGATION_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_AGGREGATION_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_AGGREGATION_MSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_AGGREGATION_MASK 0x0000000100000000
/* Description DOT11AX_BSS_COLOR_ID
BSS color of the nextwork to which this STA belongs.
When generated by TXPCU, this field is set equal to: Dot11ax_received_Bss_color_id
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_BSS_COLOR_ID_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_BSS_COLOR_ID_LSB 33
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_BSS_COLOR_ID_MSB 38
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_BSS_COLOR_ID_MASK 0x0000007e00000000
/* Description DOT11AX_SPATIAL_REUSE
This field is only valid for pkt_type == 11ax
Spatial re-use
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_SPATIAL_REUSE_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_SPATIAL_REUSE_LSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_SPATIAL_REUSE_MSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_SPATIAL_REUSE_MASK 0x0000078000000000
/* Description DOT11AX_CP_LTF_SIZE
field is only valid for pkt_type == 11ax
Indicates the CP and HE-LTF type
<enum 0 OneX_LTF_0_8CP> 1xLTF + 0.8 us CP
<enum 1 TwoX_LTF_0_8CP> 2x LTF + 0.8 µs CP
<enum 2 TwoX_LTF_1_6CP> 2x LTF + 1.6 µs CP
<enum 3 FourX_LTF_0_8CP_3_2CP>
When DCM == 0 OR STBC == 0: 4x LTF + 3.2 µs CP
When DCM == 1 AND STBC == 1: 4x LTF + 0.8 µs CP. Note:
In this scenario, Neither DCM nor STBC is applied to HE
data field.
If ( DCM == 1 ) and ( MCS > 0 ) and (STBC == 0)
0 = 1xLTF + 0.4 usec
1 = 2xLTF + 0.4 usec
2~3 = Reserved
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_CP_LTF_SIZE_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_CP_LTF_SIZE_LSB 43
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_CP_LTF_SIZE_MSB 44
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_CP_LTF_SIZE_MASK 0x0000180000000000
/* Description DOT11AX_DCM
field is only valid for pkt_type == 11ax
Indicates whether dual sub-carrier modulation is applied
0: No DCM
1:DCM
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_DCM_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_DCM_LSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_DCM_MSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_DCM_MASK 0x0000200000000000
/* Description DOT11AX_DOPPLER_INDICATION
field is only valid for pkt_type == 11ax
0: No Doppler support
1: Doppler support
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_DOPPLER_INDICATION_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_DOPPLER_INDICATION_LSB 46
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_DOPPLER_INDICATION_MSB 46
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_DOPPLER_INDICATION_MASK 0x0000400000000000
/* Description DOT11AX_SU_EXTENDED
field is only valid for pkt_type == 11ax OR pkt_type ==
11be
When set, the 11ax or 11be frame is of the extended range
format
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_SU_EXTENDED_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_SU_EXTENDED_LSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_SU_EXTENDED_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_SU_EXTENDED_MASK 0x0000800000000000
/* Description DOT11AX_MIN_PACKET_EXTENSION
field is only valid for pkt_type == 11ax OR pkt_type ==
11be
The min packet extension duration for this user.
0: no extension
1: 8us
2: 16 us
3: 20 us (only for .11be)
<legal 0-3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_MIN_PACKET_EXTENSION_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_MIN_PACKET_EXTENSION_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_MIN_PACKET_EXTENSION_MSB 49
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_MIN_PACKET_EXTENSION_MASK 0x0003000000000000
/* Description DOT11AX_PE_NSS
Number of active spatial streams during packet extension.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_NSS_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_NSS_LSB 50
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_NSS_MSB 52
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_NSS_MASK 0x001c000000000000
/* Description DOT11AX_PE_CONTENT
Content of packet extension. Valid for all 11ax packets
having packet extension
0-he_ltf, 1-last_data_symbol
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_CONTENT_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_CONTENT_LSB 53
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_CONTENT_MSB 53
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_CONTENT_MASK 0x0020000000000000
/* Description DOT11AX_PE_LTF_SIZE
LTF size to be used during packet extention. . This field
is valid for both FTM and non-FTM packets.
0-1x
1-2x (unsupported un HWK-1)
2-4x (unsupported un HWK-1)
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_LTF_SIZE_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_LTF_SIZE_LSB 54
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_LTF_SIZE_MSB 55
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_LTF_SIZE_MASK 0x00c0000000000000
/* Description DOT11AX_CHAIN_CSD_EN
This field denotes whether to apply CSD on the preamble
and data portion of the packet. This field is valid for
all transmit packets
0: disable per-chain csd
1: enable per-chain csd
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_CHAIN_CSD_EN_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_CHAIN_CSD_EN_LSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_CHAIN_CSD_EN_MSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_CHAIN_CSD_EN_MASK 0x0100000000000000
/* Description DOT11AX_PE_CHAIN_CSD_EN
This field denotes whether to apply CSD on the packet extension
portion of the packet. This field is valid for all 11ax
packets.
0: disable per-chain csd
1: enable per-chain csd
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_CHAIN_CSD_EN_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_CHAIN_CSD_EN_LSB 57
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_CHAIN_CSD_EN_MSB 57
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_PE_CHAIN_CSD_EN_MASK 0x0200000000000000
/* Description DOT11AX_DL_UL_FLAG
field is only valid for pkt_type == 11ax
<enum 0 DL_UL_FLAG_IS_DL_OR_TDLS>
<enum 1 DL_UL_FLAG_IS_UL>
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_DL_UL_FLAG_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_DL_UL_FLAG_LSB 58
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_DL_UL_FLAG_MSB 58
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_DL_UL_FLAG_MASK 0x0400000000000000
/* Description RESERVED_4A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_4A_OFFSET 0x0000000000000038
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_4A_LSB 59
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_4A_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_4A_MASK 0xf800000000000000
/* Description DOT11AX_EXT_RU_START_INDEX
field is only valid for pkt_type == 11ax and Dot11ax_su_extended
== 1
RU Number to which User is assigned
The RU numbering bitwidth is only enough to cover the 20MHz
BW that extended range allows
<legal 0-8>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_EXT_RU_START_INDEX_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_EXT_RU_START_INDEX_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_EXT_RU_START_INDEX_MSB 3
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_EXT_RU_START_INDEX_MASK 0x000000000000000f
/* Description DOT11AX_EXT_RU_SIZE
field is only valid for pkt_type == 11ax and Dot11ax_su_extended
== 1 or pkt_type == 11be and EHT_duplicate_mode == 1
The size of the RU for this user.
In case of EHT duplicate transmissions, this field indicates
the width of the actual content before duplication, e.g.
a 40 MHz PPDU duplicated to 160 MHz will have the bandwidth
fields indicating 160 MHz and this field set to e-num 4
(RU_484).
<enum 0 RU_26>
<enum 1 RU_52>
<enum 2 RU_106>
<enum 3 RU_242>
<enum 4 RU_484>
<enum 5 RU_996>
<enum 6 RU_1992>
<enum 7 RU_FULLBW> Set when the RU occupies the full packet
bandwidth
<enum 8 RU_FULLBW_240> Set when the RU occupies the full
packet bandwidth
<enum 9 RU_FULLBW_320> Set when the RU occupies the full
packet bandwidth
<enum 10 RU_MULTI_LARGE> DO NOT USE
<enum 11 RU_78> DO NOT USE
<enum 12 RU_132> DO NOT USE
<legal 0-12>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_EXT_RU_SIZE_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_EXT_RU_SIZE_LSB 4
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_EXT_RU_SIZE_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11AX_EXT_RU_SIZE_MASK 0x00000000000000f0
/* Description EHT_DUPLICATE_MODE
Field only valid for pkt_type == 11be
Indicates EHT duplicate modulation
<enum 0 eht_no_duplicate>
<enum 1 eht_2x_duplicate>
<enum 2 eht_4x_duplicate>
<legal 0-2>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_EHT_DUPLICATE_MODE_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_EHT_DUPLICATE_MODE_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_EHT_DUPLICATE_MODE_MSB 9
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_EHT_DUPLICATE_MODE_MASK 0x0000000000000300
/* Description HE_SIGB_DCM
Indicates whether dual sub-carrier modulation is applied
to EHT-SIG
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_HE_SIGB_DCM_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_HE_SIGB_DCM_LSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_HE_SIGB_DCM_MSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_HE_SIGB_DCM_MASK 0x0000000000000400
/* Description HE_SIGB_0_MCS
Indicates the MCS of EHT-SIG
For details, refer to MCS_TYPE description
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_HE_SIGB_0_MCS_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_HE_SIGB_0_MCS_LSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_HE_SIGB_0_MCS_MSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_HE_SIGB_0_MCS_MASK 0x0000000000003800
/* Description NUM_HE_SIGB_SYM
Indicates the number of EHT-SIG symbols
This field is 0-based with 0 indicating that 1 eht_sig symbol
needs to be transmitted.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_NUM_HE_SIGB_SYM_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_NUM_HE_SIGB_SYM_LSB 14
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_NUM_HE_SIGB_SYM_MSB 18
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_NUM_HE_SIGB_SYM_MASK 0x000000000007c000
/* Description REQUIRED_RESPONSE_TIME_SOURCE
<enum 0 reqd_resp_time_src_is_RXPCU> Typically from received
HT Control for sync MLO response
<enum 1 reqd_resp_time_src_is_FW>
Typically from 'PCU_PPDU_SETUP_INIT' for sync MLO response
to response
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_REQUIRED_RESPONSE_TIME_SOURCE_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_REQUIRED_RESPONSE_TIME_SOURCE_LSB 19
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_REQUIRED_RESPONSE_TIME_SOURCE_MSB 19
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_REQUIRED_RESPONSE_TIME_SOURCE_MASK 0x0000000000080000
/* Description RESERVED_5A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_5A_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_5A_LSB 20
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_5A_MSB 25
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_RESERVED_5A_MASK 0x0000000003f00000
/* Description U_SIG_PUNCTURE_PATTERN_ENCODING
6-bit value copied from 'RX_RESPONSE_REQUIRED_INFO' and 'TX_CBF_INFO'
to pass on to PDG
<legal 0-29>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_U_SIG_PUNCTURE_PATTERN_ENCODING_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_U_SIG_PUNCTURE_PATTERN_ENCODING_LSB 26
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_U_SIG_PUNCTURE_PATTERN_ENCODING_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_U_SIG_PUNCTURE_PATTERN_ENCODING_MASK 0x00000000fc000000
/* Description MLO_STA_ID_DETAILS_RX
16-bi value copied from 'RX_RESPONSE_REQUIRED_INFO' to pass
on to PDG
Bits 10 and 11 are not valid, bits [9:0] reflect 'NSTR_MLO_STA_ID'
from address search.
See definition of mlo_sta_id_details.
*/
/* Description NSTR_MLO_STA_ID
ID of peer participating in non-STR MLO
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MSB 41
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MASK 0x000003ff00000000
/* Description BLOCK_SELF_ML_SYNC
Only valid for TX
When set, this provides an indication to block the peer
for self-link.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_LSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MASK 0x0000040000000000
/* Description BLOCK_PARTNER_ML_SYNC
Only valid for TX
When set, this provides an indication to block the peer
for partner links.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_LSB 43
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MSB 43
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MASK 0x0000080000000000
/* Description NSTR_MLO_STA_ID_VALID
All the fields in this TLV are valid only if this bit is
set.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_LSB 44
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MSB 44
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MASK 0x0000100000000000
/* Description RESERVED_0A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_RESERVED_0A_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_RESERVED_0A_LSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MASK 0x0000e00000000000
/* Description REQUIRED_RESPONSE_TIME
When non-zero, indicates that PDG shall pad the response
transmission to the indicated duration (in us)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_REQUIRED_RESPONSE_TIME_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_REQUIRED_RESPONSE_TIME_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_REQUIRED_RESPONSE_TIME_MSB 59
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_REQUIRED_RESPONSE_TIME_MASK 0x0fff000000000000
/* Description DOT11BE_PARAMS_PLACEHOLDER
4 bytes for use as placeholders for 'Dot11be_*' parameters
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11BE_PARAMS_PLACEHOLDER_OFFSET 0x0000000000000040
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11BE_PARAMS_PLACEHOLDER_LSB 60
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11BE_PARAMS_PLACEHOLDER_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW40_DOT11BE_PARAMS_PLACEHOLDER_MASK 0xf000000000000000
/* Description RESPONSE_TO_RESPONSE_RATE_INFO_BW80
Field only valid in case of Response_to_response set to
SU_BA or MU_BA
NOTE: This field is also known as response_to_response_rate_info_pattern_2
in case punctured transmission is enabled.
Used by TXPCU to determine what the transmit rates are for
the response to response transmission in case original
transmission was 80 MHz.
Note:
see field R2R_bw80_active_channel for the BW of this transmission
*/
/* Description RESERVED_0A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_0A_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_0A_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_0A_MSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_0A_MASK 0x0000000000000001
/* Description TX_ANTENNA_SECTOR_CTRL
Sectored transmit antenna
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_ANTENNA_SECTOR_CTRL_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_ANTENNA_SECTOR_CTRL_LSB 1
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_ANTENNA_SECTOR_CTRL_MSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_ANTENNA_SECTOR_CTRL_MASK 0x0000000001fffffe
/* Description PKT_TYPE
Packet type:
<enum 0 dot11a>802.11a PPDU type
<enum 1 dot11b>802.11b PPDU type
<enum 2 dot11n_mm>802.11n Mixed Mode PPDU type
<enum 3 dot11ac>802.11ac PPDU type
<enum 4 dot11ax>802.11ax PPDU type
<enum 5 dot11ba>802.11ba (WUR) PPDU type
<enum 6 dot11be>802.11be PPDU type
<enum 7 dot11az>802.11az (ranging) PPDU type
<enum 8 dot11n_gf>802.11n Green Field PPDU type (unsupported
& aborted)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_PKT_TYPE_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_PKT_TYPE_LSB 25
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_PKT_TYPE_MSB 28
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_PKT_TYPE_MASK 0x000000001e000000
/* Description SMOOTHING
This field is used by PDG to populate the SMOOTHING filed
in the SIG Preamble of the PPDU
<legal 0-1>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_SMOOTHING_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_SMOOTHING_LSB 29
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_SMOOTHING_MSB 29
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_SMOOTHING_MASK 0x0000000020000000
/* Description LDPC
When set, use LDPC transmission rates
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_LDPC_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_LDPC_LSB 30
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_LDPC_MSB 30
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_LDPC_MASK 0x0000000040000000
/* Description STBC
When set, use STBC transmission rates
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_STBC_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_STBC_LSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_STBC_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_STBC_MASK 0x0000000080000000
/* Description ALT_TX_PWR
Coex related AlternativeTransmit parameter
Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_TX_PWR_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_TX_PWR_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_TX_PWR_MSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_TX_PWR_MASK 0x000000ff00000000
/* Description ALT_MIN_TX_PWR
Coex related Alternative Transmit parameter
Minimum allowed Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_MIN_TX_PWR_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_MIN_TX_PWR_LSB 40
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_MIN_TX_PWR_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_MIN_TX_PWR_MASK 0x0000ff0000000000
/* Description ALT_NSS
Coex related Alternative Transmit parameter
Number of spatial streams.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_NSS_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_NSS_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_NSS_MSB 50
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_NSS_MASK 0x0007000000000000
/* Description ALT_TX_CHAIN_MASK
Coex related Alternative Transmit parameter
Chain mask to support up to 8 antennas.
<legal 1-255>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_TX_CHAIN_MASK_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_TX_CHAIN_MASK_LSB 51
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_TX_CHAIN_MASK_MSB 58
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_TX_CHAIN_MASK_MASK 0x07f8000000000000
/* Description ALT_BW
Coex related Alternative Transmit parameter
The BW of the upcoming transmission.
<enum 0 20_mhz>20 Mhz BW
<enum 1 40_mhz>40 Mhz BW
<enum 2 80_mhz>80 Mhz BW
<enum 3 160_mhz>160 Mhz BW
<enum 4 320_mhz>320 Mhz BW
<enum 5 240_mhz>240 Mhz BW
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_BW_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_BW_LSB 59
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_BW_MSB 61
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_BW_MASK 0x3800000000000000
/* Description STF_LTF_3DB_BOOST
Boost the STF and LTF power by 3dB in 11a/n/ac packets.
This includes both the legacy preambles and the HT/VHT preambles.0:
disable power boost1: enable power boost
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_STF_LTF_3DB_BOOST_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_STF_LTF_3DB_BOOST_LSB 62
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_STF_LTF_3DB_BOOST_MSB 62
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_STF_LTF_3DB_BOOST_MASK 0x4000000000000000
/* Description FORCE_EXTRA_SYMBOL
Set to 1 to force an extra OFDM symbol (or symbols) even
if the PPDU encoding process does not result in an extra
OFDM symbol (or symbols)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_FORCE_EXTRA_SYMBOL_OFFSET 0x0000000000000048
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_FORCE_EXTRA_SYMBOL_LSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_FORCE_EXTRA_SYMBOL_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_FORCE_EXTRA_SYMBOL_MASK 0x8000000000000000
/* Description ALT_RATE_MCS
Coex related Alternative Transmit parameter
For details, refer to MCS_TYPE
Note: This is "rate" in case of 11a/11b
description
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_RATE_MCS_OFFSET 0x0000000000000050
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_RATE_MCS_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_RATE_MCS_MSB 3
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_RATE_MCS_MASK 0x000000000000000f
/* Description NSS
Number of spatial streams.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_NSS_OFFSET 0x0000000000000050
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_NSS_LSB 4
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_NSS_MSB 6
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_NSS_MASK 0x0000000000000070
/* Description DPD_ENABLE
DPD enable control
This is needed on a per packet basis
<enum 0 dpd_off> DPD profile not applied to current
packet
<enum 1 dpd_on> DPD profile applied to current packet
if available
<legal 0-1>
This field is not applicable in11ah mode of operation and
is ignored by the HW
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DPD_ENABLE_OFFSET 0x0000000000000050
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DPD_ENABLE_LSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DPD_ENABLE_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DPD_ENABLE_MASK 0x0000000000000080
/* Description TX_PWR
Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_PWR_OFFSET 0x0000000000000050
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_PWR_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_PWR_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_PWR_MASK 0x000000000000ff00
/* Description MIN_TX_PWR
Coex related field:
Minimum allowed Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MIN_TX_PWR_OFFSET 0x0000000000000050
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MIN_TX_PWR_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MIN_TX_PWR_MSB 23
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MIN_TX_PWR_MASK 0x0000000000ff0000
/* Description TX_CHAIN_MASK
Chain mask to support up to 8 antennas.
<legal 1-255>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_CHAIN_MASK_OFFSET 0x0000000000000050
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_CHAIN_MASK_LSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_CHAIN_MASK_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_CHAIN_MASK_MASK 0x00000000ff000000
/* Description RESERVED_3A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_3A_OFFSET 0x0000000000000050
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_3A_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_3A_MSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_3A_MASK 0x000000ff00000000
/* Description SGI
Field only valid when pkt type is HT or VHT.For 11ax see
field Dot11ax_CP_LTF_size
<enum 0 0_8_us_sgi > Legacy normal GI. Can also be used
for HE
<enum 1 0_4_us_sgi > Legacy short GI. Can also be used
for HE
<enum 2 1_6_us_sgi > Not used for pre 11ax pkt_types.
<enum 3 3_2_us_sgi > Not used for pre 11ax pkt_types
<legal 0 - 3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_SGI_OFFSET 0x0000000000000050
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_SGI_LSB 40
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_SGI_MSB 41
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_SGI_MASK 0x0000030000000000
/* Description RATE_MCS
For details, refer to MCS_TYPE description
Note: This is "rate" in case of 11a/11b
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RATE_MCS_OFFSET 0x0000000000000050
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RATE_MCS_LSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RATE_MCS_MSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RATE_MCS_MASK 0x00003c0000000000
/* Description RESERVED_3B
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_3B_OFFSET 0x0000000000000050
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_3B_LSB 46
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_3B_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_3B_MASK 0x0000c00000000000
/* Description TX_PWR_1
Default (desired) transmit parameter for the second chain
Transmit Power in s6.2 format.
In units of 0.25 dBm
Note that there is no Min value for this
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_PWR_1_OFFSET 0x0000000000000050
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_PWR_1_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_PWR_1_MSB 55
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_TX_PWR_1_MASK 0x00ff000000000000
/* Description ALT_TX_PWR_1
Alternate (desired) transmit parameter for the second chain
Transmit Power in s6.2 format.
In units of 0.25 dBm
Note that there is no Min value for this
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_TX_PWR_1_OFFSET 0x0000000000000050
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_TX_PWR_1_LSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_TX_PWR_1_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_ALT_TX_PWR_1_MASK 0xff00000000000000
/* Description AGGREGATION
Field only valid in case of pkt_type == 11n
<enum 0 mpdu> Indicates MPDU format. TXPCU will select
this setting if the CBF response only contains a single
segment
<enum 1 a_mpdu> Indicates A-MPDU format. TXPCU will
select this setting if the CBF response will contain two
or more segments
<legal 0-1>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_AGGREGATION_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_AGGREGATION_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_AGGREGATION_MSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_AGGREGATION_MASK 0x0000000000000001
/* Description DOT11AX_BSS_COLOR_ID
BSS color of the nextwork to which this STA belongs.
When generated by TXPCU, this field is set equal to: Dot11ax_received_Bss_color_id
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_BSS_COLOR_ID_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_BSS_COLOR_ID_LSB 1
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_BSS_COLOR_ID_MSB 6
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_BSS_COLOR_ID_MASK 0x000000000000007e
/* Description DOT11AX_SPATIAL_REUSE
This field is only valid for pkt_type == 11ax
Spatial re-use
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_SPATIAL_REUSE_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_SPATIAL_REUSE_LSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_SPATIAL_REUSE_MSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_SPATIAL_REUSE_MASK 0x0000000000000780
/* Description DOT11AX_CP_LTF_SIZE
field is only valid for pkt_type == 11ax
Indicates the CP and HE-LTF type
<enum 0 OneX_LTF_0_8CP> 1xLTF + 0.8 us CP
<enum 1 TwoX_LTF_0_8CP> 2x LTF + 0.8 µs CP
<enum 2 TwoX_LTF_1_6CP> 2x LTF + 1.6 µs CP
<enum 3 FourX_LTF_0_8CP_3_2CP>
When DCM == 0 OR STBC == 0: 4x LTF + 3.2 µs CP
When DCM == 1 AND STBC == 1: 4x LTF + 0.8 µs CP. Note:
In this scenario, Neither DCM nor STBC is applied to HE
data field.
If ( DCM == 1 ) and ( MCS > 0 ) and (STBC == 0)
0 = 1xLTF + 0.4 usec
1 = 2xLTF + 0.4 usec
2~3 = Reserved
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_CP_LTF_SIZE_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_CP_LTF_SIZE_LSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_CP_LTF_SIZE_MSB 12
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_CP_LTF_SIZE_MASK 0x0000000000001800
/* Description DOT11AX_DCM
field is only valid for pkt_type == 11ax
Indicates whether dual sub-carrier modulation is applied
0: No DCM
1:DCM
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_DCM_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_DCM_LSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_DCM_MSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_DCM_MASK 0x0000000000002000
/* Description DOT11AX_DOPPLER_INDICATION
field is only valid for pkt_type == 11ax
0: No Doppler support
1: Doppler support
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_DOPPLER_INDICATION_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_DOPPLER_INDICATION_LSB 14
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_DOPPLER_INDICATION_MSB 14
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_DOPPLER_INDICATION_MASK 0x0000000000004000
/* Description DOT11AX_SU_EXTENDED
field is only valid for pkt_type == 11ax OR pkt_type ==
11be
When set, the 11ax or 11be frame is of the extended range
format
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_SU_EXTENDED_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_SU_EXTENDED_LSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_SU_EXTENDED_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_SU_EXTENDED_MASK 0x0000000000008000
/* Description DOT11AX_MIN_PACKET_EXTENSION
field is only valid for pkt_type == 11ax OR pkt_type ==
11be
The min packet extension duration for this user.
0: no extension
1: 8us
2: 16 us
3: 20 us (only for .11be)
<legal 0-3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_MIN_PACKET_EXTENSION_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_MIN_PACKET_EXTENSION_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_MIN_PACKET_EXTENSION_MSB 17
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_MIN_PACKET_EXTENSION_MASK 0x0000000000030000
/* Description DOT11AX_PE_NSS
Number of active spatial streams during packet extension.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_NSS_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_NSS_LSB 18
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_NSS_MSB 20
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_NSS_MASK 0x00000000001c0000
/* Description DOT11AX_PE_CONTENT
Content of packet extension. Valid for all 11ax packets
having packet extension
0-he_ltf, 1-last_data_symbol
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_CONTENT_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_CONTENT_LSB 21
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_CONTENT_MSB 21
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_CONTENT_MASK 0x0000000000200000
/* Description DOT11AX_PE_LTF_SIZE
LTF size to be used during packet extention. . This field
is valid for both FTM and non-FTM packets.
0-1x
1-2x (unsupported un HWK-1)
2-4x (unsupported un HWK-1)
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_LTF_SIZE_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_LTF_SIZE_LSB 22
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_LTF_SIZE_MSB 23
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_LTF_SIZE_MASK 0x0000000000c00000
/* Description DOT11AX_CHAIN_CSD_EN
This field denotes whether to apply CSD on the preamble
and data portion of the packet. This field is valid for
all transmit packets
0: disable per-chain csd
1: enable per-chain csd
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_CHAIN_CSD_EN_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_CHAIN_CSD_EN_LSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_CHAIN_CSD_EN_MSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_CHAIN_CSD_EN_MASK 0x0000000001000000
/* Description DOT11AX_PE_CHAIN_CSD_EN
This field denotes whether to apply CSD on the packet extension
portion of the packet. This field is valid for all 11ax
packets.
0: disable per-chain csd
1: enable per-chain csd
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_CHAIN_CSD_EN_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_CHAIN_CSD_EN_LSB 25
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_CHAIN_CSD_EN_MSB 25
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_PE_CHAIN_CSD_EN_MASK 0x0000000002000000
/* Description DOT11AX_DL_UL_FLAG
field is only valid for pkt_type == 11ax
<enum 0 DL_UL_FLAG_IS_DL_OR_TDLS>
<enum 1 DL_UL_FLAG_IS_UL>
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_DL_UL_FLAG_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_DL_UL_FLAG_LSB 26
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_DL_UL_FLAG_MSB 26
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_DL_UL_FLAG_MASK 0x0000000004000000
/* Description RESERVED_4A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_4A_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_4A_LSB 27
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_4A_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_4A_MASK 0x00000000f8000000
/* Description DOT11AX_EXT_RU_START_INDEX
field is only valid for pkt_type == 11ax and Dot11ax_su_extended
== 1
RU Number to which User is assigned
The RU numbering bitwidth is only enough to cover the 20MHz
BW that extended range allows
<legal 0-8>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_EXT_RU_START_INDEX_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_EXT_RU_START_INDEX_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_EXT_RU_START_INDEX_MSB 35
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_EXT_RU_START_INDEX_MASK 0x0000000f00000000
/* Description DOT11AX_EXT_RU_SIZE
field is only valid for pkt_type == 11ax and Dot11ax_su_extended
== 1 or pkt_type == 11be and EHT_duplicate_mode == 1
The size of the RU for this user.
In case of EHT duplicate transmissions, this field indicates
the width of the actual content before duplication, e.g.
a 40 MHz PPDU duplicated to 160 MHz will have the bandwidth
fields indicating 160 MHz and this field set to e-num 4
(RU_484).
<enum 0 RU_26>
<enum 1 RU_52>
<enum 2 RU_106>
<enum 3 RU_242>
<enum 4 RU_484>
<enum 5 RU_996>
<enum 6 RU_1992>
<enum 7 RU_FULLBW> Set when the RU occupies the full packet
bandwidth
<enum 8 RU_FULLBW_240> Set when the RU occupies the full
packet bandwidth
<enum 9 RU_FULLBW_320> Set when the RU occupies the full
packet bandwidth
<enum 10 RU_MULTI_LARGE> DO NOT USE
<enum 11 RU_78> DO NOT USE
<enum 12 RU_132> DO NOT USE
<legal 0-12>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_EXT_RU_SIZE_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_EXT_RU_SIZE_LSB 36
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_EXT_RU_SIZE_MSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11AX_EXT_RU_SIZE_MASK 0x000000f000000000
/* Description EHT_DUPLICATE_MODE
Field only valid for pkt_type == 11be
Indicates EHT duplicate modulation
<enum 0 eht_no_duplicate>
<enum 1 eht_2x_duplicate>
<enum 2 eht_4x_duplicate>
<legal 0-2>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_EHT_DUPLICATE_MODE_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_EHT_DUPLICATE_MODE_LSB 40
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_EHT_DUPLICATE_MODE_MSB 41
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_EHT_DUPLICATE_MODE_MASK 0x0000030000000000
/* Description HE_SIGB_DCM
Indicates whether dual sub-carrier modulation is applied
to EHT-SIG
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_HE_SIGB_DCM_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_HE_SIGB_DCM_LSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_HE_SIGB_DCM_MSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_HE_SIGB_DCM_MASK 0x0000040000000000
/* Description HE_SIGB_0_MCS
Indicates the MCS of EHT-SIG
For details, refer to MCS_TYPE description
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_HE_SIGB_0_MCS_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_HE_SIGB_0_MCS_LSB 43
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_HE_SIGB_0_MCS_MSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_HE_SIGB_0_MCS_MASK 0x0000380000000000
/* Description NUM_HE_SIGB_SYM
Indicates the number of EHT-SIG symbols
This field is 0-based with 0 indicating that 1 eht_sig symbol
needs to be transmitted.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_NUM_HE_SIGB_SYM_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_NUM_HE_SIGB_SYM_LSB 46
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_NUM_HE_SIGB_SYM_MSB 50
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_NUM_HE_SIGB_SYM_MASK 0x0007c00000000000
/* Description REQUIRED_RESPONSE_TIME_SOURCE
<enum 0 reqd_resp_time_src_is_RXPCU> Typically from received
HT Control for sync MLO response
<enum 1 reqd_resp_time_src_is_FW>
Typically from 'PCU_PPDU_SETUP_INIT' for sync MLO response
to response
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_REQUIRED_RESPONSE_TIME_SOURCE_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_REQUIRED_RESPONSE_TIME_SOURCE_LSB 51
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_REQUIRED_RESPONSE_TIME_SOURCE_MSB 51
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_REQUIRED_RESPONSE_TIME_SOURCE_MASK 0x0008000000000000
/* Description RESERVED_5A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_5A_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_5A_LSB 52
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_5A_MSB 57
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_RESERVED_5A_MASK 0x03f0000000000000
/* Description U_SIG_PUNCTURE_PATTERN_ENCODING
6-bit value copied from 'RX_RESPONSE_REQUIRED_INFO' and 'TX_CBF_INFO'
to pass on to PDG
<legal 0-29>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_U_SIG_PUNCTURE_PATTERN_ENCODING_OFFSET 0x0000000000000058
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_U_SIG_PUNCTURE_PATTERN_ENCODING_LSB 58
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_U_SIG_PUNCTURE_PATTERN_ENCODING_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_U_SIG_PUNCTURE_PATTERN_ENCODING_MASK 0xfc00000000000000
/* Description MLO_STA_ID_DETAILS_RX
16-bi value copied from 'RX_RESPONSE_REQUIRED_INFO' to pass
on to PDG
Bits 10 and 11 are not valid, bits [9:0] reflect 'NSTR_MLO_STA_ID'
from address search.
See definition of mlo_sta_id_details.
*/
/* Description NSTR_MLO_STA_ID
ID of peer participating in non-STR MLO
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MSB 9
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MASK 0x00000000000003ff
/* Description BLOCK_SELF_ML_SYNC
Only valid for TX
When set, this provides an indication to block the peer
for self-link.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_LSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MASK 0x0000000000000400
/* Description BLOCK_PARTNER_ML_SYNC
Only valid for TX
When set, this provides an indication to block the peer
for partner links.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_LSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MASK 0x0000000000000800
/* Description NSTR_MLO_STA_ID_VALID
All the fields in this TLV are valid only if this bit is
set.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_LSB 12
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MSB 12
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MASK 0x0000000000001000
/* Description RESERVED_0A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_RESERVED_0A_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_RESERVED_0A_LSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MASK 0x000000000000e000
/* Description REQUIRED_RESPONSE_TIME
When non-zero, indicates that PDG shall pad the response
transmission to the indicated duration (in us)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_REQUIRED_RESPONSE_TIME_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_REQUIRED_RESPONSE_TIME_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_REQUIRED_RESPONSE_TIME_MSB 27
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_REQUIRED_RESPONSE_TIME_MASK 0x000000000fff0000
/* Description DOT11BE_PARAMS_PLACEHOLDER
4 bytes for use as placeholders for 'Dot11be_*' parameters
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11BE_PARAMS_PLACEHOLDER_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11BE_PARAMS_PLACEHOLDER_LSB 28
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11BE_PARAMS_PLACEHOLDER_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW80_DOT11BE_PARAMS_PLACEHOLDER_MASK 0x00000000f0000000
/* Description RESPONSE_TO_RESPONSE_RATE_INFO_BW160
Field only valid in case of Response_to_response set to
SU_BA or MU_BA
NOTE: This field is also known as response_to_response_rate_info_pattern_3
in case punctured transmission is enabled.
Used by TXPCU to determine what the transmit rates are for
the response to response transmission in case original
transmission was 160 MHz.
Note:
see field R2R_bw160_active_channel for the BW of this transmission
*/
/* Description RESERVED_0A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_0A_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_0A_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_0A_MSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_0A_MASK 0x0000000100000000
/* Description TX_ANTENNA_SECTOR_CTRL
Sectored transmit antenna
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_ANTENNA_SECTOR_CTRL_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_ANTENNA_SECTOR_CTRL_LSB 33
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_ANTENNA_SECTOR_CTRL_MSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_ANTENNA_SECTOR_CTRL_MASK 0x01fffffe00000000
/* Description PKT_TYPE
Packet type:
<enum 0 dot11a>802.11a PPDU type
<enum 1 dot11b>802.11b PPDU type
<enum 2 dot11n_mm>802.11n Mixed Mode PPDU type
<enum 3 dot11ac>802.11ac PPDU type
<enum 4 dot11ax>802.11ax PPDU type
<enum 5 dot11ba>802.11ba (WUR) PPDU type
<enum 6 dot11be>802.11be PPDU type
<enum 7 dot11az>802.11az (ranging) PPDU type
<enum 8 dot11n_gf>802.11n Green Field PPDU type (unsupported
& aborted)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_PKT_TYPE_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_PKT_TYPE_LSB 57
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_PKT_TYPE_MSB 60
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_PKT_TYPE_MASK 0x1e00000000000000
/* Description SMOOTHING
This field is used by PDG to populate the SMOOTHING filed
in the SIG Preamble of the PPDU
<legal 0-1>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_SMOOTHING_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_SMOOTHING_LSB 61
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_SMOOTHING_MSB 61
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_SMOOTHING_MASK 0x2000000000000000
/* Description LDPC
When set, use LDPC transmission rates
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_LDPC_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_LDPC_LSB 62
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_LDPC_MSB 62
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_LDPC_MASK 0x4000000000000000
/* Description STBC
When set, use STBC transmission rates
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_STBC_OFFSET 0x0000000000000060
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_STBC_LSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_STBC_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_STBC_MASK 0x8000000000000000
/* Description ALT_TX_PWR
Coex related AlternativeTransmit parameter
Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_TX_PWR_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_TX_PWR_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_TX_PWR_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_TX_PWR_MASK 0x00000000000000ff
/* Description ALT_MIN_TX_PWR
Coex related Alternative Transmit parameter
Minimum allowed Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_MIN_TX_PWR_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_MIN_TX_PWR_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_MIN_TX_PWR_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_MIN_TX_PWR_MASK 0x000000000000ff00
/* Description ALT_NSS
Coex related Alternative Transmit parameter
Number of spatial streams.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_NSS_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_NSS_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_NSS_MSB 18
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_NSS_MASK 0x0000000000070000
/* Description ALT_TX_CHAIN_MASK
Coex related Alternative Transmit parameter
Chain mask to support up to 8 antennas.
<legal 1-255>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_TX_CHAIN_MASK_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_TX_CHAIN_MASK_LSB 19
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_TX_CHAIN_MASK_MSB 26
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_TX_CHAIN_MASK_MASK 0x0000000007f80000
/* Description ALT_BW
Coex related Alternative Transmit parameter
The BW of the upcoming transmission.
<enum 0 20_mhz>20 Mhz BW
<enum 1 40_mhz>40 Mhz BW
<enum 2 80_mhz>80 Mhz BW
<enum 3 160_mhz>160 Mhz BW
<enum 4 320_mhz>320 Mhz BW
<enum 5 240_mhz>240 Mhz BW
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_BW_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_BW_LSB 27
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_BW_MSB 29
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_BW_MASK 0x0000000038000000
/* Description STF_LTF_3DB_BOOST
Boost the STF and LTF power by 3dB in 11a/n/ac packets.
This includes both the legacy preambles and the HT/VHT preambles.0:
disable power boost1: enable power boost
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_STF_LTF_3DB_BOOST_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_STF_LTF_3DB_BOOST_LSB 30
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_STF_LTF_3DB_BOOST_MSB 30
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_STF_LTF_3DB_BOOST_MASK 0x0000000040000000
/* Description FORCE_EXTRA_SYMBOL
Set to 1 to force an extra OFDM symbol (or symbols) even
if the PPDU encoding process does not result in an extra
OFDM symbol (or symbols)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_FORCE_EXTRA_SYMBOL_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_FORCE_EXTRA_SYMBOL_LSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_FORCE_EXTRA_SYMBOL_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_FORCE_EXTRA_SYMBOL_MASK 0x0000000080000000
/* Description ALT_RATE_MCS
Coex related Alternative Transmit parameter
For details, refer to MCS_TYPE
Note: This is "rate" in case of 11a/11b
description
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_RATE_MCS_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_RATE_MCS_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_RATE_MCS_MSB 35
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_RATE_MCS_MASK 0x0000000f00000000
/* Description NSS
Number of spatial streams.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_NSS_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_NSS_LSB 36
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_NSS_MSB 38
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_NSS_MASK 0x0000007000000000
/* Description DPD_ENABLE
DPD enable control
This is needed on a per packet basis
<enum 0 dpd_off> DPD profile not applied to current
packet
<enum 1 dpd_on> DPD profile applied to current packet
if available
<legal 0-1>
This field is not applicable in11ah mode of operation and
is ignored by the HW
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DPD_ENABLE_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DPD_ENABLE_LSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DPD_ENABLE_MSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DPD_ENABLE_MASK 0x0000008000000000
/* Description TX_PWR
Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_PWR_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_PWR_LSB 40
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_PWR_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_PWR_MASK 0x0000ff0000000000
/* Description MIN_TX_PWR
Coex related field:
Minimum allowed Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MIN_TX_PWR_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MIN_TX_PWR_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MIN_TX_PWR_MSB 55
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MIN_TX_PWR_MASK 0x00ff000000000000
/* Description TX_CHAIN_MASK
Chain mask to support up to 8 antennas.
<legal 1-255>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_CHAIN_MASK_OFFSET 0x0000000000000068
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_CHAIN_MASK_LSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_CHAIN_MASK_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_CHAIN_MASK_MASK 0xff00000000000000
/* Description RESERVED_3A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_3A_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_3A_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_3A_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_3A_MASK 0x00000000000000ff
/* Description SGI
Field only valid when pkt type is HT or VHT.For 11ax see
field Dot11ax_CP_LTF_size
<enum 0 0_8_us_sgi > Legacy normal GI. Can also be used
for HE
<enum 1 0_4_us_sgi > Legacy short GI. Can also be used
for HE
<enum 2 1_6_us_sgi > Not used for pre 11ax pkt_types.
<enum 3 3_2_us_sgi > Not used for pre 11ax pkt_types
<legal 0 - 3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_SGI_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_SGI_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_SGI_MSB 9
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_SGI_MASK 0x0000000000000300
/* Description RATE_MCS
For details, refer to MCS_TYPE description
Note: This is "rate" in case of 11a/11b
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RATE_MCS_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RATE_MCS_LSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RATE_MCS_MSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RATE_MCS_MASK 0x0000000000003c00
/* Description RESERVED_3B
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_3B_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_3B_LSB 14
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_3B_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_3B_MASK 0x000000000000c000
/* Description TX_PWR_1
Default (desired) transmit parameter for the second chain
Transmit Power in s6.2 format.
In units of 0.25 dBm
Note that there is no Min value for this
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_PWR_1_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_PWR_1_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_PWR_1_MSB 23
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_TX_PWR_1_MASK 0x0000000000ff0000
/* Description ALT_TX_PWR_1
Alternate (desired) transmit parameter for the second chain
Transmit Power in s6.2 format.
In units of 0.25 dBm
Note that there is no Min value for this
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_TX_PWR_1_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_TX_PWR_1_LSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_TX_PWR_1_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_ALT_TX_PWR_1_MASK 0x00000000ff000000
/* Description AGGREGATION
Field only valid in case of pkt_type == 11n
<enum 0 mpdu> Indicates MPDU format. TXPCU will select
this setting if the CBF response only contains a single
segment
<enum 1 a_mpdu> Indicates A-MPDU format. TXPCU will
select this setting if the CBF response will contain two
or more segments
<legal 0-1>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_AGGREGATION_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_AGGREGATION_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_AGGREGATION_MSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_AGGREGATION_MASK 0x0000000100000000
/* Description DOT11AX_BSS_COLOR_ID
BSS color of the nextwork to which this STA belongs.
When generated by TXPCU, this field is set equal to: Dot11ax_received_Bss_color_id
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_BSS_COLOR_ID_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_BSS_COLOR_ID_LSB 33
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_BSS_COLOR_ID_MSB 38
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_BSS_COLOR_ID_MASK 0x0000007e00000000
/* Description DOT11AX_SPATIAL_REUSE
This field is only valid for pkt_type == 11ax
Spatial re-use
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_SPATIAL_REUSE_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_SPATIAL_REUSE_LSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_SPATIAL_REUSE_MSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_SPATIAL_REUSE_MASK 0x0000078000000000
/* Description DOT11AX_CP_LTF_SIZE
field is only valid for pkt_type == 11ax
Indicates the CP and HE-LTF type
<enum 0 OneX_LTF_0_8CP> 1xLTF + 0.8 us CP
<enum 1 TwoX_LTF_0_8CP> 2x LTF + 0.8 µs CP
<enum 2 TwoX_LTF_1_6CP> 2x LTF + 1.6 µs CP
<enum 3 FourX_LTF_0_8CP_3_2CP>
When DCM == 0 OR STBC == 0: 4x LTF + 3.2 µs CP
When DCM == 1 AND STBC == 1: 4x LTF + 0.8 µs CP. Note:
In this scenario, Neither DCM nor STBC is applied to HE
data field.
If ( DCM == 1 ) and ( MCS > 0 ) and (STBC == 0)
0 = 1xLTF + 0.4 usec
1 = 2xLTF + 0.4 usec
2~3 = Reserved
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_CP_LTF_SIZE_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_CP_LTF_SIZE_LSB 43
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_CP_LTF_SIZE_MSB 44
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_CP_LTF_SIZE_MASK 0x0000180000000000
/* Description DOT11AX_DCM
field is only valid for pkt_type == 11ax
Indicates whether dual sub-carrier modulation is applied
0: No DCM
1:DCM
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_DCM_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_DCM_LSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_DCM_MSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_DCM_MASK 0x0000200000000000
/* Description DOT11AX_DOPPLER_INDICATION
field is only valid for pkt_type == 11ax
0: No Doppler support
1: Doppler support
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_DOPPLER_INDICATION_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_DOPPLER_INDICATION_LSB 46
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_DOPPLER_INDICATION_MSB 46
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_DOPPLER_INDICATION_MASK 0x0000400000000000
/* Description DOT11AX_SU_EXTENDED
field is only valid for pkt_type == 11ax OR pkt_type ==
11be
When set, the 11ax or 11be frame is of the extended range
format
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_SU_EXTENDED_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_SU_EXTENDED_LSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_SU_EXTENDED_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_SU_EXTENDED_MASK 0x0000800000000000
/* Description DOT11AX_MIN_PACKET_EXTENSION
field is only valid for pkt_type == 11ax OR pkt_type ==
11be
The min packet extension duration for this user.
0: no extension
1: 8us
2: 16 us
3: 20 us (only for .11be)
<legal 0-3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_MIN_PACKET_EXTENSION_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_MIN_PACKET_EXTENSION_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_MIN_PACKET_EXTENSION_MSB 49
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_MIN_PACKET_EXTENSION_MASK 0x0003000000000000
/* Description DOT11AX_PE_NSS
Number of active spatial streams during packet extension.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_NSS_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_NSS_LSB 50
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_NSS_MSB 52
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_NSS_MASK 0x001c000000000000
/* Description DOT11AX_PE_CONTENT
Content of packet extension. Valid for all 11ax packets
having packet extension
0-he_ltf, 1-last_data_symbol
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_CONTENT_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_CONTENT_LSB 53
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_CONTENT_MSB 53
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_CONTENT_MASK 0x0020000000000000
/* Description DOT11AX_PE_LTF_SIZE
LTF size to be used during packet extention. . This field
is valid for both FTM and non-FTM packets.
0-1x
1-2x (unsupported un HWK-1)
2-4x (unsupported un HWK-1)
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_LTF_SIZE_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_LTF_SIZE_LSB 54
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_LTF_SIZE_MSB 55
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_LTF_SIZE_MASK 0x00c0000000000000
/* Description DOT11AX_CHAIN_CSD_EN
This field denotes whether to apply CSD on the preamble
and data portion of the packet. This field is valid for
all transmit packets
0: disable per-chain csd
1: enable per-chain csd
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_CHAIN_CSD_EN_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_CHAIN_CSD_EN_LSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_CHAIN_CSD_EN_MSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_CHAIN_CSD_EN_MASK 0x0100000000000000
/* Description DOT11AX_PE_CHAIN_CSD_EN
This field denotes whether to apply CSD on the packet extension
portion of the packet. This field is valid for all 11ax
packets.
0: disable per-chain csd
1: enable per-chain csd
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_CHAIN_CSD_EN_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_CHAIN_CSD_EN_LSB 57
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_CHAIN_CSD_EN_MSB 57
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_PE_CHAIN_CSD_EN_MASK 0x0200000000000000
/* Description DOT11AX_DL_UL_FLAG
field is only valid for pkt_type == 11ax
<enum 0 DL_UL_FLAG_IS_DL_OR_TDLS>
<enum 1 DL_UL_FLAG_IS_UL>
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_DL_UL_FLAG_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_DL_UL_FLAG_LSB 58
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_DL_UL_FLAG_MSB 58
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_DL_UL_FLAG_MASK 0x0400000000000000
/* Description RESERVED_4A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_4A_OFFSET 0x0000000000000070
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_4A_LSB 59
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_4A_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_4A_MASK 0xf800000000000000
/* Description DOT11AX_EXT_RU_START_INDEX
field is only valid for pkt_type == 11ax and Dot11ax_su_extended
== 1
RU Number to which User is assigned
The RU numbering bitwidth is only enough to cover the 20MHz
BW that extended range allows
<legal 0-8>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_EXT_RU_START_INDEX_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_EXT_RU_START_INDEX_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_EXT_RU_START_INDEX_MSB 3
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_EXT_RU_START_INDEX_MASK 0x000000000000000f
/* Description DOT11AX_EXT_RU_SIZE
field is only valid for pkt_type == 11ax and Dot11ax_su_extended
== 1 or pkt_type == 11be and EHT_duplicate_mode == 1
The size of the RU for this user.
In case of EHT duplicate transmissions, this field indicates
the width of the actual content before duplication, e.g.
a 40 MHz PPDU duplicated to 160 MHz will have the bandwidth
fields indicating 160 MHz and this field set to e-num 4
(RU_484).
<enum 0 RU_26>
<enum 1 RU_52>
<enum 2 RU_106>
<enum 3 RU_242>
<enum 4 RU_484>
<enum 5 RU_996>
<enum 6 RU_1992>
<enum 7 RU_FULLBW> Set when the RU occupies the full packet
bandwidth
<enum 8 RU_FULLBW_240> Set when the RU occupies the full
packet bandwidth
<enum 9 RU_FULLBW_320> Set when the RU occupies the full
packet bandwidth
<enum 10 RU_MULTI_LARGE> DO NOT USE
<enum 11 RU_78> DO NOT USE
<enum 12 RU_132> DO NOT USE
<legal 0-12>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_EXT_RU_SIZE_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_EXT_RU_SIZE_LSB 4
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_EXT_RU_SIZE_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11AX_EXT_RU_SIZE_MASK 0x00000000000000f0
/* Description EHT_DUPLICATE_MODE
Field only valid for pkt_type == 11be
Indicates EHT duplicate modulation
<enum 0 eht_no_duplicate>
<enum 1 eht_2x_duplicate>
<enum 2 eht_4x_duplicate>
<legal 0-2>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_EHT_DUPLICATE_MODE_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_EHT_DUPLICATE_MODE_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_EHT_DUPLICATE_MODE_MSB 9
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_EHT_DUPLICATE_MODE_MASK 0x0000000000000300
/* Description HE_SIGB_DCM
Indicates whether dual sub-carrier modulation is applied
to EHT-SIG
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_HE_SIGB_DCM_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_HE_SIGB_DCM_LSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_HE_SIGB_DCM_MSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_HE_SIGB_DCM_MASK 0x0000000000000400
/* Description HE_SIGB_0_MCS
Indicates the MCS of EHT-SIG
For details, refer to MCS_TYPE description
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_HE_SIGB_0_MCS_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_HE_SIGB_0_MCS_LSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_HE_SIGB_0_MCS_MSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_HE_SIGB_0_MCS_MASK 0x0000000000003800
/* Description NUM_HE_SIGB_SYM
Indicates the number of EHT-SIG symbols
This field is 0-based with 0 indicating that 1 eht_sig symbol
needs to be transmitted.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_NUM_HE_SIGB_SYM_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_NUM_HE_SIGB_SYM_LSB 14
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_NUM_HE_SIGB_SYM_MSB 18
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_NUM_HE_SIGB_SYM_MASK 0x000000000007c000
/* Description REQUIRED_RESPONSE_TIME_SOURCE
<enum 0 reqd_resp_time_src_is_RXPCU> Typically from received
HT Control for sync MLO response
<enum 1 reqd_resp_time_src_is_FW>
Typically from 'PCU_PPDU_SETUP_INIT' for sync MLO response
to response
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_REQUIRED_RESPONSE_TIME_SOURCE_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_REQUIRED_RESPONSE_TIME_SOURCE_LSB 19
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_REQUIRED_RESPONSE_TIME_SOURCE_MSB 19
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_REQUIRED_RESPONSE_TIME_SOURCE_MASK 0x0000000000080000
/* Description RESERVED_5A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_5A_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_5A_LSB 20
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_5A_MSB 25
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_RESERVED_5A_MASK 0x0000000003f00000
/* Description U_SIG_PUNCTURE_PATTERN_ENCODING
6-bit value copied from 'RX_RESPONSE_REQUIRED_INFO' and 'TX_CBF_INFO'
to pass on to PDG
<legal 0-29>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_U_SIG_PUNCTURE_PATTERN_ENCODING_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_U_SIG_PUNCTURE_PATTERN_ENCODING_LSB 26
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_U_SIG_PUNCTURE_PATTERN_ENCODING_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_U_SIG_PUNCTURE_PATTERN_ENCODING_MASK 0x00000000fc000000
/* Description MLO_STA_ID_DETAILS_RX
16-bi value copied from 'RX_RESPONSE_REQUIRED_INFO' to pass
on to PDG
Bits 10 and 11 are not valid, bits [9:0] reflect 'NSTR_MLO_STA_ID'
from address search.
See definition of mlo_sta_id_details.
*/
/* Description NSTR_MLO_STA_ID
ID of peer participating in non-STR MLO
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MSB 41
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MASK 0x000003ff00000000
/* Description BLOCK_SELF_ML_SYNC
Only valid for TX
When set, this provides an indication to block the peer
for self-link.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_LSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MASK 0x0000040000000000
/* Description BLOCK_PARTNER_ML_SYNC
Only valid for TX
When set, this provides an indication to block the peer
for partner links.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_LSB 43
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MSB 43
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MASK 0x0000080000000000
/* Description NSTR_MLO_STA_ID_VALID
All the fields in this TLV are valid only if this bit is
set.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_LSB 44
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MSB 44
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MASK 0x0000100000000000
/* Description RESERVED_0A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_RESERVED_0A_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_RESERVED_0A_LSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MASK 0x0000e00000000000
/* Description REQUIRED_RESPONSE_TIME
When non-zero, indicates that PDG shall pad the response
transmission to the indicated duration (in us)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_REQUIRED_RESPONSE_TIME_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_REQUIRED_RESPONSE_TIME_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_REQUIRED_RESPONSE_TIME_MSB 59
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_REQUIRED_RESPONSE_TIME_MASK 0x0fff000000000000
/* Description DOT11BE_PARAMS_PLACEHOLDER
4 bytes for use as placeholders for 'Dot11be_*' parameters
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11BE_PARAMS_PLACEHOLDER_OFFSET 0x0000000000000078
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11BE_PARAMS_PLACEHOLDER_LSB 60
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11BE_PARAMS_PLACEHOLDER_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW160_DOT11BE_PARAMS_PLACEHOLDER_MASK 0xf000000000000000
/* Description RESPONSE_TO_RESPONSE_RATE_INFO_BW240
Field only valid in case of Response_to_response set to
SU_BA or MU_BA
NOTE: This field is also known as response_to_response_rate_info_pattern_4
in case punctured transmission is enabled.
Used by TXPCU to determine what the transmit rates are for
the response to response transmission in case original
transmission was 240 MHz.
Note:
see field R2R_bw240_active_channel for the BW of this transmission
*/
/* Description RESERVED_0A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_0A_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_0A_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_0A_MSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_0A_MASK 0x0000000000000001
/* Description TX_ANTENNA_SECTOR_CTRL
Sectored transmit antenna
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_ANTENNA_SECTOR_CTRL_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_ANTENNA_SECTOR_CTRL_LSB 1
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_ANTENNA_SECTOR_CTRL_MSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_ANTENNA_SECTOR_CTRL_MASK 0x0000000001fffffe
/* Description PKT_TYPE
Packet type:
<enum 0 dot11a>802.11a PPDU type
<enum 1 dot11b>802.11b PPDU type
<enum 2 dot11n_mm>802.11n Mixed Mode PPDU type
<enum 3 dot11ac>802.11ac PPDU type
<enum 4 dot11ax>802.11ax PPDU type
<enum 5 dot11ba>802.11ba (WUR) PPDU type
<enum 6 dot11be>802.11be PPDU type
<enum 7 dot11az>802.11az (ranging) PPDU type
<enum 8 dot11n_gf>802.11n Green Field PPDU type (unsupported
& aborted)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_PKT_TYPE_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_PKT_TYPE_LSB 25
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_PKT_TYPE_MSB 28
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_PKT_TYPE_MASK 0x000000001e000000
/* Description SMOOTHING
This field is used by PDG to populate the SMOOTHING filed
in the SIG Preamble of the PPDU
<legal 0-1>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_SMOOTHING_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_SMOOTHING_LSB 29
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_SMOOTHING_MSB 29
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_SMOOTHING_MASK 0x0000000020000000
/* Description LDPC
When set, use LDPC transmission rates
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_LDPC_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_LDPC_LSB 30
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_LDPC_MSB 30
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_LDPC_MASK 0x0000000040000000
/* Description STBC
When set, use STBC transmission rates
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_STBC_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_STBC_LSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_STBC_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_STBC_MASK 0x0000000080000000
/* Description ALT_TX_PWR
Coex related AlternativeTransmit parameter
Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_TX_PWR_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_TX_PWR_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_TX_PWR_MSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_TX_PWR_MASK 0x000000ff00000000
/* Description ALT_MIN_TX_PWR
Coex related Alternative Transmit parameter
Minimum allowed Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_MIN_TX_PWR_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_MIN_TX_PWR_LSB 40
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_MIN_TX_PWR_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_MIN_TX_PWR_MASK 0x0000ff0000000000
/* Description ALT_NSS
Coex related Alternative Transmit parameter
Number of spatial streams.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_NSS_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_NSS_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_NSS_MSB 50
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_NSS_MASK 0x0007000000000000
/* Description ALT_TX_CHAIN_MASK
Coex related Alternative Transmit parameter
Chain mask to support up to 8 antennas.
<legal 1-255>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_TX_CHAIN_MASK_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_TX_CHAIN_MASK_LSB 51
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_TX_CHAIN_MASK_MSB 58
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_TX_CHAIN_MASK_MASK 0x07f8000000000000
/* Description ALT_BW
Coex related Alternative Transmit parameter
The BW of the upcoming transmission.
<enum 0 20_mhz>20 Mhz BW
<enum 1 40_mhz>40 Mhz BW
<enum 2 80_mhz>80 Mhz BW
<enum 3 160_mhz>160 Mhz BW
<enum 4 320_mhz>320 Mhz BW
<enum 5 240_mhz>240 Mhz BW
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_BW_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_BW_LSB 59
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_BW_MSB 61
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_BW_MASK 0x3800000000000000
/* Description STF_LTF_3DB_BOOST
Boost the STF and LTF power by 3dB in 11a/n/ac packets.
This includes both the legacy preambles and the HT/VHT preambles.0:
disable power boost1: enable power boost
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_STF_LTF_3DB_BOOST_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_STF_LTF_3DB_BOOST_LSB 62
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_STF_LTF_3DB_BOOST_MSB 62
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_STF_LTF_3DB_BOOST_MASK 0x4000000000000000
/* Description FORCE_EXTRA_SYMBOL
Set to 1 to force an extra OFDM symbol (or symbols) even
if the PPDU encoding process does not result in an extra
OFDM symbol (or symbols)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_FORCE_EXTRA_SYMBOL_OFFSET 0x0000000000000080
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_FORCE_EXTRA_SYMBOL_LSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_FORCE_EXTRA_SYMBOL_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_FORCE_EXTRA_SYMBOL_MASK 0x8000000000000000
/* Description ALT_RATE_MCS
Coex related Alternative Transmit parameter
For details, refer to MCS_TYPE
Note: This is "rate" in case of 11a/11b
description
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_RATE_MCS_OFFSET 0x0000000000000088
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_RATE_MCS_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_RATE_MCS_MSB 3
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_RATE_MCS_MASK 0x000000000000000f
/* Description NSS
Number of spatial streams.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_NSS_OFFSET 0x0000000000000088
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_NSS_LSB 4
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_NSS_MSB 6
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_NSS_MASK 0x0000000000000070
/* Description DPD_ENABLE
DPD enable control
This is needed on a per packet basis
<enum 0 dpd_off> DPD profile not applied to current
packet
<enum 1 dpd_on> DPD profile applied to current packet
if available
<legal 0-1>
This field is not applicable in11ah mode of operation and
is ignored by the HW
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DPD_ENABLE_OFFSET 0x0000000000000088
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DPD_ENABLE_LSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DPD_ENABLE_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DPD_ENABLE_MASK 0x0000000000000080
/* Description TX_PWR
Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_PWR_OFFSET 0x0000000000000088
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_PWR_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_PWR_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_PWR_MASK 0x000000000000ff00
/* Description MIN_TX_PWR
Coex related field:
Minimum allowed Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MIN_TX_PWR_OFFSET 0x0000000000000088
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MIN_TX_PWR_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MIN_TX_PWR_MSB 23
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MIN_TX_PWR_MASK 0x0000000000ff0000
/* Description TX_CHAIN_MASK
Chain mask to support up to 8 antennas.
<legal 1-255>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_CHAIN_MASK_OFFSET 0x0000000000000088
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_CHAIN_MASK_LSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_CHAIN_MASK_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_CHAIN_MASK_MASK 0x00000000ff000000
/* Description RESERVED_3A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_3A_OFFSET 0x0000000000000088
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_3A_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_3A_MSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_3A_MASK 0x000000ff00000000
/* Description SGI
Field only valid when pkt type is HT or VHT.For 11ax see
field Dot11ax_CP_LTF_size
<enum 0 0_8_us_sgi > Legacy normal GI. Can also be used
for HE
<enum 1 0_4_us_sgi > Legacy short GI. Can also be used
for HE
<enum 2 1_6_us_sgi > Not used for pre 11ax pkt_types.
<enum 3 3_2_us_sgi > Not used for pre 11ax pkt_types
<legal 0 - 3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_SGI_OFFSET 0x0000000000000088
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_SGI_LSB 40
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_SGI_MSB 41
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_SGI_MASK 0x0000030000000000
/* Description RATE_MCS
For details, refer to MCS_TYPE description
Note: This is "rate" in case of 11a/11b
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RATE_MCS_OFFSET 0x0000000000000088
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RATE_MCS_LSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RATE_MCS_MSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RATE_MCS_MASK 0x00003c0000000000
/* Description RESERVED_3B
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_3B_OFFSET 0x0000000000000088
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_3B_LSB 46
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_3B_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_3B_MASK 0x0000c00000000000
/* Description TX_PWR_1
Default (desired) transmit parameter for the second chain
Transmit Power in s6.2 format.
In units of 0.25 dBm
Note that there is no Min value for this
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_PWR_1_OFFSET 0x0000000000000088
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_PWR_1_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_PWR_1_MSB 55
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_TX_PWR_1_MASK 0x00ff000000000000
/* Description ALT_TX_PWR_1
Alternate (desired) transmit parameter for the second chain
Transmit Power in s6.2 format.
In units of 0.25 dBm
Note that there is no Min value for this
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_TX_PWR_1_OFFSET 0x0000000000000088
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_TX_PWR_1_LSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_TX_PWR_1_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_ALT_TX_PWR_1_MASK 0xff00000000000000
/* Description AGGREGATION
Field only valid in case of pkt_type == 11n
<enum 0 mpdu> Indicates MPDU format. TXPCU will select
this setting if the CBF response only contains a single
segment
<enum 1 a_mpdu> Indicates A-MPDU format. TXPCU will
select this setting if the CBF response will contain two
or more segments
<legal 0-1>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_AGGREGATION_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_AGGREGATION_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_AGGREGATION_MSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_AGGREGATION_MASK 0x0000000000000001
/* Description DOT11AX_BSS_COLOR_ID
BSS color of the nextwork to which this STA belongs.
When generated by TXPCU, this field is set equal to: Dot11ax_received_Bss_color_id
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_BSS_COLOR_ID_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_BSS_COLOR_ID_LSB 1
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_BSS_COLOR_ID_MSB 6
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_BSS_COLOR_ID_MASK 0x000000000000007e
/* Description DOT11AX_SPATIAL_REUSE
This field is only valid for pkt_type == 11ax
Spatial re-use
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_SPATIAL_REUSE_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_SPATIAL_REUSE_LSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_SPATIAL_REUSE_MSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_SPATIAL_REUSE_MASK 0x0000000000000780
/* Description DOT11AX_CP_LTF_SIZE
field is only valid for pkt_type == 11ax
Indicates the CP and HE-LTF type
<enum 0 OneX_LTF_0_8CP> 1xLTF + 0.8 us CP
<enum 1 TwoX_LTF_0_8CP> 2x LTF + 0.8 µs CP
<enum 2 TwoX_LTF_1_6CP> 2x LTF + 1.6 µs CP
<enum 3 FourX_LTF_0_8CP_3_2CP>
When DCM == 0 OR STBC == 0: 4x LTF + 3.2 µs CP
When DCM == 1 AND STBC == 1: 4x LTF + 0.8 µs CP. Note:
In this scenario, Neither DCM nor STBC is applied to HE
data field.
If ( DCM == 1 ) and ( MCS > 0 ) and (STBC == 0)
0 = 1xLTF + 0.4 usec
1 = 2xLTF + 0.4 usec
2~3 = Reserved
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_CP_LTF_SIZE_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_CP_LTF_SIZE_LSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_CP_LTF_SIZE_MSB 12
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_CP_LTF_SIZE_MASK 0x0000000000001800
/* Description DOT11AX_DCM
field is only valid for pkt_type == 11ax
Indicates whether dual sub-carrier modulation is applied
0: No DCM
1:DCM
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_DCM_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_DCM_LSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_DCM_MSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_DCM_MASK 0x0000000000002000
/* Description DOT11AX_DOPPLER_INDICATION
field is only valid for pkt_type == 11ax
0: No Doppler support
1: Doppler support
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_DOPPLER_INDICATION_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_DOPPLER_INDICATION_LSB 14
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_DOPPLER_INDICATION_MSB 14
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_DOPPLER_INDICATION_MASK 0x0000000000004000
/* Description DOT11AX_SU_EXTENDED
field is only valid for pkt_type == 11ax OR pkt_type ==
11be
When set, the 11ax or 11be frame is of the extended range
format
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_SU_EXTENDED_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_SU_EXTENDED_LSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_SU_EXTENDED_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_SU_EXTENDED_MASK 0x0000000000008000
/* Description DOT11AX_MIN_PACKET_EXTENSION
field is only valid for pkt_type == 11ax OR pkt_type ==
11be
The min packet extension duration for this user.
0: no extension
1: 8us
2: 16 us
3: 20 us (only for .11be)
<legal 0-3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_MIN_PACKET_EXTENSION_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_MIN_PACKET_EXTENSION_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_MIN_PACKET_EXTENSION_MSB 17
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_MIN_PACKET_EXTENSION_MASK 0x0000000000030000
/* Description DOT11AX_PE_NSS
Number of active spatial streams during packet extension.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_NSS_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_NSS_LSB 18
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_NSS_MSB 20
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_NSS_MASK 0x00000000001c0000
/* Description DOT11AX_PE_CONTENT
Content of packet extension. Valid for all 11ax packets
having packet extension
0-he_ltf, 1-last_data_symbol
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_CONTENT_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_CONTENT_LSB 21
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_CONTENT_MSB 21
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_CONTENT_MASK 0x0000000000200000
/* Description DOT11AX_PE_LTF_SIZE
LTF size to be used during packet extention. . This field
is valid for both FTM and non-FTM packets.
0-1x
1-2x (unsupported un HWK-1)
2-4x (unsupported un HWK-1)
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_LTF_SIZE_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_LTF_SIZE_LSB 22
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_LTF_SIZE_MSB 23
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_LTF_SIZE_MASK 0x0000000000c00000
/* Description DOT11AX_CHAIN_CSD_EN
This field denotes whether to apply CSD on the preamble
and data portion of the packet. This field is valid for
all transmit packets
0: disable per-chain csd
1: enable per-chain csd
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_CHAIN_CSD_EN_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_CHAIN_CSD_EN_LSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_CHAIN_CSD_EN_MSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_CHAIN_CSD_EN_MASK 0x0000000001000000
/* Description DOT11AX_PE_CHAIN_CSD_EN
This field denotes whether to apply CSD on the packet extension
portion of the packet. This field is valid for all 11ax
packets.
0: disable per-chain csd
1: enable per-chain csd
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_CHAIN_CSD_EN_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_CHAIN_CSD_EN_LSB 25
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_CHAIN_CSD_EN_MSB 25
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_PE_CHAIN_CSD_EN_MASK 0x0000000002000000
/* Description DOT11AX_DL_UL_FLAG
field is only valid for pkt_type == 11ax
<enum 0 DL_UL_FLAG_IS_DL_OR_TDLS>
<enum 1 DL_UL_FLAG_IS_UL>
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_DL_UL_FLAG_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_DL_UL_FLAG_LSB 26
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_DL_UL_FLAG_MSB 26
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_DL_UL_FLAG_MASK 0x0000000004000000
/* Description RESERVED_4A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_4A_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_4A_LSB 27
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_4A_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_4A_MASK 0x00000000f8000000
/* Description DOT11AX_EXT_RU_START_INDEX
field is only valid for pkt_type == 11ax and Dot11ax_su_extended
== 1
RU Number to which User is assigned
The RU numbering bitwidth is only enough to cover the 20MHz
BW that extended range allows
<legal 0-8>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_EXT_RU_START_INDEX_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_EXT_RU_START_INDEX_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_EXT_RU_START_INDEX_MSB 35
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_EXT_RU_START_INDEX_MASK 0x0000000f00000000
/* Description DOT11AX_EXT_RU_SIZE
field is only valid for pkt_type == 11ax and Dot11ax_su_extended
== 1 or pkt_type == 11be and EHT_duplicate_mode == 1
The size of the RU for this user.
In case of EHT duplicate transmissions, this field indicates
the width of the actual content before duplication, e.g.
a 40 MHz PPDU duplicated to 160 MHz will have the bandwidth
fields indicating 160 MHz and this field set to e-num 4
(RU_484).
<enum 0 RU_26>
<enum 1 RU_52>
<enum 2 RU_106>
<enum 3 RU_242>
<enum 4 RU_484>
<enum 5 RU_996>
<enum 6 RU_1992>
<enum 7 RU_FULLBW> Set when the RU occupies the full packet
bandwidth
<enum 8 RU_FULLBW_240> Set when the RU occupies the full
packet bandwidth
<enum 9 RU_FULLBW_320> Set when the RU occupies the full
packet bandwidth
<enum 10 RU_MULTI_LARGE> DO NOT USE
<enum 11 RU_78> DO NOT USE
<enum 12 RU_132> DO NOT USE
<legal 0-12>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_EXT_RU_SIZE_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_EXT_RU_SIZE_LSB 36
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_EXT_RU_SIZE_MSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11AX_EXT_RU_SIZE_MASK 0x000000f000000000
/* Description EHT_DUPLICATE_MODE
Field only valid for pkt_type == 11be
Indicates EHT duplicate modulation
<enum 0 eht_no_duplicate>
<enum 1 eht_2x_duplicate>
<enum 2 eht_4x_duplicate>
<legal 0-2>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_EHT_DUPLICATE_MODE_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_EHT_DUPLICATE_MODE_LSB 40
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_EHT_DUPLICATE_MODE_MSB 41
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_EHT_DUPLICATE_MODE_MASK 0x0000030000000000
/* Description HE_SIGB_DCM
Indicates whether dual sub-carrier modulation is applied
to EHT-SIG
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_HE_SIGB_DCM_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_HE_SIGB_DCM_LSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_HE_SIGB_DCM_MSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_HE_SIGB_DCM_MASK 0x0000040000000000
/* Description HE_SIGB_0_MCS
Indicates the MCS of EHT-SIG
For details, refer to MCS_TYPE description
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_HE_SIGB_0_MCS_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_HE_SIGB_0_MCS_LSB 43
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_HE_SIGB_0_MCS_MSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_HE_SIGB_0_MCS_MASK 0x0000380000000000
/* Description NUM_HE_SIGB_SYM
Indicates the number of EHT-SIG symbols
This field is 0-based with 0 indicating that 1 eht_sig symbol
needs to be transmitted.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_NUM_HE_SIGB_SYM_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_NUM_HE_SIGB_SYM_LSB 46
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_NUM_HE_SIGB_SYM_MSB 50
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_NUM_HE_SIGB_SYM_MASK 0x0007c00000000000
/* Description REQUIRED_RESPONSE_TIME_SOURCE
<enum 0 reqd_resp_time_src_is_RXPCU> Typically from received
HT Control for sync MLO response
<enum 1 reqd_resp_time_src_is_FW>
Typically from 'PCU_PPDU_SETUP_INIT' for sync MLO response
to response
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_REQUIRED_RESPONSE_TIME_SOURCE_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_REQUIRED_RESPONSE_TIME_SOURCE_LSB 51
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_REQUIRED_RESPONSE_TIME_SOURCE_MSB 51
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_REQUIRED_RESPONSE_TIME_SOURCE_MASK 0x0008000000000000
/* Description RESERVED_5A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_5A_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_5A_LSB 52
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_5A_MSB 57
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_RESERVED_5A_MASK 0x03f0000000000000
/* Description U_SIG_PUNCTURE_PATTERN_ENCODING
6-bit value copied from 'RX_RESPONSE_REQUIRED_INFO' and 'TX_CBF_INFO'
to pass on to PDG
<legal 0-29>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_U_SIG_PUNCTURE_PATTERN_ENCODING_OFFSET 0x0000000000000090
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_U_SIG_PUNCTURE_PATTERN_ENCODING_LSB 58
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_U_SIG_PUNCTURE_PATTERN_ENCODING_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_U_SIG_PUNCTURE_PATTERN_ENCODING_MASK 0xfc00000000000000
/* Description MLO_STA_ID_DETAILS_RX
16-bi value copied from 'RX_RESPONSE_REQUIRED_INFO' to pass
on to PDG
Bits 10 and 11 are not valid, bits [9:0] reflect 'NSTR_MLO_STA_ID'
from address search.
See definition of mlo_sta_id_details.
*/
/* Description NSTR_MLO_STA_ID
ID of peer participating in non-STR MLO
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MSB 9
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MASK 0x00000000000003ff
/* Description BLOCK_SELF_ML_SYNC
Only valid for TX
When set, this provides an indication to block the peer
for self-link.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_LSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MASK 0x0000000000000400
/* Description BLOCK_PARTNER_ML_SYNC
Only valid for TX
When set, this provides an indication to block the peer
for partner links.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_LSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MASK 0x0000000000000800
/* Description NSTR_MLO_STA_ID_VALID
All the fields in this TLV are valid only if this bit is
set.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_LSB 12
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MSB 12
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MASK 0x0000000000001000
/* Description RESERVED_0A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_RESERVED_0A_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_RESERVED_0A_LSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MASK 0x000000000000e000
/* Description REQUIRED_RESPONSE_TIME
When non-zero, indicates that PDG shall pad the response
transmission to the indicated duration (in us)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_REQUIRED_RESPONSE_TIME_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_REQUIRED_RESPONSE_TIME_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_REQUIRED_RESPONSE_TIME_MSB 27
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_REQUIRED_RESPONSE_TIME_MASK 0x000000000fff0000
/* Description DOT11BE_PARAMS_PLACEHOLDER
4 bytes for use as placeholders for 'Dot11be_*' parameters
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11BE_PARAMS_PLACEHOLDER_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11BE_PARAMS_PLACEHOLDER_LSB 28
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11BE_PARAMS_PLACEHOLDER_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW240_DOT11BE_PARAMS_PLACEHOLDER_MASK 0x00000000f0000000
/* Description RESPONSE_TO_RESPONSE_RATE_INFO_BW320
Field only valid in case of Response_to_response set to
SU_BA or MU_BA
NOTE: This field is also known as response_to_response_rate_info_pattern_5
in case punctured transmission is enabled.
Used by TXPCU to determine what the transmit rates are for
the response to response transmission in case original
transmission was 320 MHz.
Note:
see field R2R_bw320_active_channel for the BW of this transmission
*/
/* Description RESERVED_0A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_0A_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_0A_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_0A_MSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_0A_MASK 0x0000000100000000
/* Description TX_ANTENNA_SECTOR_CTRL
Sectored transmit antenna
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_ANTENNA_SECTOR_CTRL_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_ANTENNA_SECTOR_CTRL_LSB 33
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_ANTENNA_SECTOR_CTRL_MSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_ANTENNA_SECTOR_CTRL_MASK 0x01fffffe00000000
/* Description PKT_TYPE
Packet type:
<enum 0 dot11a>802.11a PPDU type
<enum 1 dot11b>802.11b PPDU type
<enum 2 dot11n_mm>802.11n Mixed Mode PPDU type
<enum 3 dot11ac>802.11ac PPDU type
<enum 4 dot11ax>802.11ax PPDU type
<enum 5 dot11ba>802.11ba (WUR) PPDU type
<enum 6 dot11be>802.11be PPDU type
<enum 7 dot11az>802.11az (ranging) PPDU type
<enum 8 dot11n_gf>802.11n Green Field PPDU type (unsupported
& aborted)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_PKT_TYPE_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_PKT_TYPE_LSB 57
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_PKT_TYPE_MSB 60
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_PKT_TYPE_MASK 0x1e00000000000000
/* Description SMOOTHING
This field is used by PDG to populate the SMOOTHING filed
in the SIG Preamble of the PPDU
<legal 0-1>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_SMOOTHING_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_SMOOTHING_LSB 61
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_SMOOTHING_MSB 61
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_SMOOTHING_MASK 0x2000000000000000
/* Description LDPC
When set, use LDPC transmission rates
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_LDPC_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_LDPC_LSB 62
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_LDPC_MSB 62
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_LDPC_MASK 0x4000000000000000
/* Description STBC
When set, use STBC transmission rates
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_STBC_OFFSET 0x0000000000000098
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_STBC_LSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_STBC_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_STBC_MASK 0x8000000000000000
/* Description ALT_TX_PWR
Coex related AlternativeTransmit parameter
Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_TX_PWR_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_TX_PWR_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_TX_PWR_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_TX_PWR_MASK 0x00000000000000ff
/* Description ALT_MIN_TX_PWR
Coex related Alternative Transmit parameter
Minimum allowed Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_MIN_TX_PWR_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_MIN_TX_PWR_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_MIN_TX_PWR_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_MIN_TX_PWR_MASK 0x000000000000ff00
/* Description ALT_NSS
Coex related Alternative Transmit parameter
Number of spatial streams.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_NSS_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_NSS_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_NSS_MSB 18
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_NSS_MASK 0x0000000000070000
/* Description ALT_TX_CHAIN_MASK
Coex related Alternative Transmit parameter
Chain mask to support up to 8 antennas.
<legal 1-255>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_TX_CHAIN_MASK_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_TX_CHAIN_MASK_LSB 19
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_TX_CHAIN_MASK_MSB 26
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_TX_CHAIN_MASK_MASK 0x0000000007f80000
/* Description ALT_BW
Coex related Alternative Transmit parameter
The BW of the upcoming transmission.
<enum 0 20_mhz>20 Mhz BW
<enum 1 40_mhz>40 Mhz BW
<enum 2 80_mhz>80 Mhz BW
<enum 3 160_mhz>160 Mhz BW
<enum 4 320_mhz>320 Mhz BW
<enum 5 240_mhz>240 Mhz BW
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_BW_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_BW_LSB 27
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_BW_MSB 29
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_BW_MASK 0x0000000038000000
/* Description STF_LTF_3DB_BOOST
Boost the STF and LTF power by 3dB in 11a/n/ac packets.
This includes both the legacy preambles and the HT/VHT preambles.0:
disable power boost1: enable power boost
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_STF_LTF_3DB_BOOST_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_STF_LTF_3DB_BOOST_LSB 30
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_STF_LTF_3DB_BOOST_MSB 30
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_STF_LTF_3DB_BOOST_MASK 0x0000000040000000
/* Description FORCE_EXTRA_SYMBOL
Set to 1 to force an extra OFDM symbol (or symbols) even
if the PPDU encoding process does not result in an extra
OFDM symbol (or symbols)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_FORCE_EXTRA_SYMBOL_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_FORCE_EXTRA_SYMBOL_LSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_FORCE_EXTRA_SYMBOL_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_FORCE_EXTRA_SYMBOL_MASK 0x0000000080000000
/* Description ALT_RATE_MCS
Coex related Alternative Transmit parameter
For details, refer to MCS_TYPE
Note: This is "rate" in case of 11a/11b
description
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_RATE_MCS_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_RATE_MCS_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_RATE_MCS_MSB 35
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_RATE_MCS_MASK 0x0000000f00000000
/* Description NSS
Number of spatial streams.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_NSS_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_NSS_LSB 36
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_NSS_MSB 38
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_NSS_MASK 0x0000007000000000
/* Description DPD_ENABLE
DPD enable control
This is needed on a per packet basis
<enum 0 dpd_off> DPD profile not applied to current
packet
<enum 1 dpd_on> DPD profile applied to current packet
if available
<legal 0-1>
This field is not applicable in11ah mode of operation and
is ignored by the HW
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DPD_ENABLE_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DPD_ENABLE_LSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DPD_ENABLE_MSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DPD_ENABLE_MASK 0x0000008000000000
/* Description TX_PWR
Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_PWR_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_PWR_LSB 40
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_PWR_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_PWR_MASK 0x0000ff0000000000
/* Description MIN_TX_PWR
Coex related field:
Minimum allowed Transmit Power in s6.2 format.
In units of 0.25 dBm
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MIN_TX_PWR_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MIN_TX_PWR_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MIN_TX_PWR_MSB 55
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MIN_TX_PWR_MASK 0x00ff000000000000
/* Description TX_CHAIN_MASK
Chain mask to support up to 8 antennas.
<legal 1-255>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_CHAIN_MASK_OFFSET 0x00000000000000a0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_CHAIN_MASK_LSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_CHAIN_MASK_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_CHAIN_MASK_MASK 0xff00000000000000
/* Description RESERVED_3A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_3A_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_3A_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_3A_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_3A_MASK 0x00000000000000ff
/* Description SGI
Field only valid when pkt type is HT or VHT.For 11ax see
field Dot11ax_CP_LTF_size
<enum 0 0_8_us_sgi > Legacy normal GI. Can also be used
for HE
<enum 1 0_4_us_sgi > Legacy short GI. Can also be used
for HE
<enum 2 1_6_us_sgi > Not used for pre 11ax pkt_types.
<enum 3 3_2_us_sgi > Not used for pre 11ax pkt_types
<legal 0 - 3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_SGI_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_SGI_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_SGI_MSB 9
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_SGI_MASK 0x0000000000000300
/* Description RATE_MCS
For details, refer to MCS_TYPE description
Note: This is "rate" in case of 11a/11b
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RATE_MCS_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RATE_MCS_LSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RATE_MCS_MSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RATE_MCS_MASK 0x0000000000003c00
/* Description RESERVED_3B
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_3B_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_3B_LSB 14
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_3B_MSB 15
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_3B_MASK 0x000000000000c000
/* Description TX_PWR_1
Default (desired) transmit parameter for the second chain
Transmit Power in s6.2 format.
In units of 0.25 dBm
Note that there is no Min value for this
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_PWR_1_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_PWR_1_LSB 16
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_PWR_1_MSB 23
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_TX_PWR_1_MASK 0x0000000000ff0000
/* Description ALT_TX_PWR_1
Alternate (desired) transmit parameter for the second chain
Transmit Power in s6.2 format.
In units of 0.25 dBm
Note that there is no Min value for this
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_TX_PWR_1_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_TX_PWR_1_LSB 24
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_TX_PWR_1_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_ALT_TX_PWR_1_MASK 0x00000000ff000000
/* Description AGGREGATION
Field only valid in case of pkt_type == 11n
<enum 0 mpdu> Indicates MPDU format. TXPCU will select
this setting if the CBF response only contains a single
segment
<enum 1 a_mpdu> Indicates A-MPDU format. TXPCU will
select this setting if the CBF response will contain two
or more segments
<legal 0-1>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_AGGREGATION_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_AGGREGATION_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_AGGREGATION_MSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_AGGREGATION_MASK 0x0000000100000000
/* Description DOT11AX_BSS_COLOR_ID
BSS color of the nextwork to which this STA belongs.
When generated by TXPCU, this field is set equal to: Dot11ax_received_Bss_color_id
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_BSS_COLOR_ID_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_BSS_COLOR_ID_LSB 33
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_BSS_COLOR_ID_MSB 38
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_BSS_COLOR_ID_MASK 0x0000007e00000000
/* Description DOT11AX_SPATIAL_REUSE
This field is only valid for pkt_type == 11ax
Spatial re-use
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_SPATIAL_REUSE_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_SPATIAL_REUSE_LSB 39
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_SPATIAL_REUSE_MSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_SPATIAL_REUSE_MASK 0x0000078000000000
/* Description DOT11AX_CP_LTF_SIZE
field is only valid for pkt_type == 11ax
Indicates the CP and HE-LTF type
<enum 0 OneX_LTF_0_8CP> 1xLTF + 0.8 us CP
<enum 1 TwoX_LTF_0_8CP> 2x LTF + 0.8 µs CP
<enum 2 TwoX_LTF_1_6CP> 2x LTF + 1.6 µs CP
<enum 3 FourX_LTF_0_8CP_3_2CP>
When DCM == 0 OR STBC == 0: 4x LTF + 3.2 µs CP
When DCM == 1 AND STBC == 1: 4x LTF + 0.8 µs CP. Note:
In this scenario, Neither DCM nor STBC is applied to HE
data field.
If ( DCM == 1 ) and ( MCS > 0 ) and (STBC == 0)
0 = 1xLTF + 0.4 usec
1 = 2xLTF + 0.4 usec
2~3 = Reserved
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_CP_LTF_SIZE_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_CP_LTF_SIZE_LSB 43
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_CP_LTF_SIZE_MSB 44
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_CP_LTF_SIZE_MASK 0x0000180000000000
/* Description DOT11AX_DCM
field is only valid for pkt_type == 11ax
Indicates whether dual sub-carrier modulation is applied
0: No DCM
1:DCM
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_DCM_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_DCM_LSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_DCM_MSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_DCM_MASK 0x0000200000000000
/* Description DOT11AX_DOPPLER_INDICATION
field is only valid for pkt_type == 11ax
0: No Doppler support
1: Doppler support
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_DOPPLER_INDICATION_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_DOPPLER_INDICATION_LSB 46
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_DOPPLER_INDICATION_MSB 46
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_DOPPLER_INDICATION_MASK 0x0000400000000000
/* Description DOT11AX_SU_EXTENDED
field is only valid for pkt_type == 11ax OR pkt_type ==
11be
When set, the 11ax or 11be frame is of the extended range
format
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_SU_EXTENDED_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_SU_EXTENDED_LSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_SU_EXTENDED_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_SU_EXTENDED_MASK 0x0000800000000000
/* Description DOT11AX_MIN_PACKET_EXTENSION
field is only valid for pkt_type == 11ax OR pkt_type ==
11be
The min packet extension duration for this user.
0: no extension
1: 8us
2: 16 us
3: 20 us (only for .11be)
<legal 0-3>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_MIN_PACKET_EXTENSION_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_MIN_PACKET_EXTENSION_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_MIN_PACKET_EXTENSION_MSB 49
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_MIN_PACKET_EXTENSION_MASK 0x0003000000000000
/* Description DOT11AX_PE_NSS
Number of active spatial streams during packet extension.
<enum 0 1_spatial_stream>Single spatial stream
<enum 1 2_spatial_streams>2 spatial streams
<enum 2 3_spatial_streams>3 spatial streams
<enum 3 4_spatial_streams>4 spatial streams
<enum 4 5_spatial_streams>5 spatial streams
<enum 5 6_spatial_streams>6 spatial streams
<enum 6 7_spatial_streams>7 spatial streams
<enum 7 8_spatial_streams>8 spatial streams
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_NSS_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_NSS_LSB 50
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_NSS_MSB 52
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_NSS_MASK 0x001c000000000000
/* Description DOT11AX_PE_CONTENT
Content of packet extension. Valid for all 11ax packets
having packet extension
0-he_ltf, 1-last_data_symbol
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_CONTENT_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_CONTENT_LSB 53
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_CONTENT_MSB 53
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_CONTENT_MASK 0x0020000000000000
/* Description DOT11AX_PE_LTF_SIZE
LTF size to be used during packet extention. . This field
is valid for both FTM and non-FTM packets.
0-1x
1-2x (unsupported un HWK-1)
2-4x (unsupported un HWK-1)
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_LTF_SIZE_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_LTF_SIZE_LSB 54
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_LTF_SIZE_MSB 55
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_LTF_SIZE_MASK 0x00c0000000000000
/* Description DOT11AX_CHAIN_CSD_EN
This field denotes whether to apply CSD on the preamble
and data portion of the packet. This field is valid for
all transmit packets
0: disable per-chain csd
1: enable per-chain csd
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_CHAIN_CSD_EN_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_CHAIN_CSD_EN_LSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_CHAIN_CSD_EN_MSB 56
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_CHAIN_CSD_EN_MASK 0x0100000000000000
/* Description DOT11AX_PE_CHAIN_CSD_EN
This field denotes whether to apply CSD on the packet extension
portion of the packet. This field is valid for all 11ax
packets.
0: disable per-chain csd
1: enable per-chain csd
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_CHAIN_CSD_EN_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_CHAIN_CSD_EN_LSB 57
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_CHAIN_CSD_EN_MSB 57
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_PE_CHAIN_CSD_EN_MASK 0x0200000000000000
/* Description DOT11AX_DL_UL_FLAG
field is only valid for pkt_type == 11ax
<enum 0 DL_UL_FLAG_IS_DL_OR_TDLS>
<enum 1 DL_UL_FLAG_IS_UL>
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_DL_UL_FLAG_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_DL_UL_FLAG_LSB 58
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_DL_UL_FLAG_MSB 58
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_DL_UL_FLAG_MASK 0x0400000000000000
/* Description RESERVED_4A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_4A_OFFSET 0x00000000000000a8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_4A_LSB 59
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_4A_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_4A_MASK 0xf800000000000000
/* Description DOT11AX_EXT_RU_START_INDEX
field is only valid for pkt_type == 11ax and Dot11ax_su_extended
== 1
RU Number to which User is assigned
The RU numbering bitwidth is only enough to cover the 20MHz
BW that extended range allows
<legal 0-8>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_EXT_RU_START_INDEX_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_EXT_RU_START_INDEX_LSB 0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_EXT_RU_START_INDEX_MSB 3
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_EXT_RU_START_INDEX_MASK 0x000000000000000f
/* Description DOT11AX_EXT_RU_SIZE
field is only valid for pkt_type == 11ax and Dot11ax_su_extended
== 1 or pkt_type == 11be and EHT_duplicate_mode == 1
The size of the RU for this user.
In case of EHT duplicate transmissions, this field indicates
the width of the actual content before duplication, e.g.
a 40 MHz PPDU duplicated to 160 MHz will have the bandwidth
fields indicating 160 MHz and this field set to e-num 4
(RU_484).
<enum 0 RU_26>
<enum 1 RU_52>
<enum 2 RU_106>
<enum 3 RU_242>
<enum 4 RU_484>
<enum 5 RU_996>
<enum 6 RU_1992>
<enum 7 RU_FULLBW> Set when the RU occupies the full packet
bandwidth
<enum 8 RU_FULLBW_240> Set when the RU occupies the full
packet bandwidth
<enum 9 RU_FULLBW_320> Set when the RU occupies the full
packet bandwidth
<enum 10 RU_MULTI_LARGE> DO NOT USE
<enum 11 RU_78> DO NOT USE
<enum 12 RU_132> DO NOT USE
<legal 0-12>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_EXT_RU_SIZE_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_EXT_RU_SIZE_LSB 4
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_EXT_RU_SIZE_MSB 7
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11AX_EXT_RU_SIZE_MASK 0x00000000000000f0
/* Description EHT_DUPLICATE_MODE
Field only valid for pkt_type == 11be
Indicates EHT duplicate modulation
<enum 0 eht_no_duplicate>
<enum 1 eht_2x_duplicate>
<enum 2 eht_4x_duplicate>
<legal 0-2>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_EHT_DUPLICATE_MODE_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_EHT_DUPLICATE_MODE_LSB 8
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_EHT_DUPLICATE_MODE_MSB 9
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_EHT_DUPLICATE_MODE_MASK 0x0000000000000300
/* Description HE_SIGB_DCM
Indicates whether dual sub-carrier modulation is applied
to EHT-SIG
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_HE_SIGB_DCM_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_HE_SIGB_DCM_LSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_HE_SIGB_DCM_MSB 10
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_HE_SIGB_DCM_MASK 0x0000000000000400
/* Description HE_SIGB_0_MCS
Indicates the MCS of EHT-SIG
For details, refer to MCS_TYPE description
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_HE_SIGB_0_MCS_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_HE_SIGB_0_MCS_LSB 11
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_HE_SIGB_0_MCS_MSB 13
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_HE_SIGB_0_MCS_MASK 0x0000000000003800
/* Description NUM_HE_SIGB_SYM
Indicates the number of EHT-SIG symbols
This field is 0-based with 0 indicating that 1 eht_sig symbol
needs to be transmitted.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_NUM_HE_SIGB_SYM_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_NUM_HE_SIGB_SYM_LSB 14
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_NUM_HE_SIGB_SYM_MSB 18
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_NUM_HE_SIGB_SYM_MASK 0x000000000007c000
/* Description REQUIRED_RESPONSE_TIME_SOURCE
<enum 0 reqd_resp_time_src_is_RXPCU> Typically from received
HT Control for sync MLO response
<enum 1 reqd_resp_time_src_is_FW>
Typically from 'PCU_PPDU_SETUP_INIT' for sync MLO response
to response
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_REQUIRED_RESPONSE_TIME_SOURCE_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_REQUIRED_RESPONSE_TIME_SOURCE_LSB 19
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_REQUIRED_RESPONSE_TIME_SOURCE_MSB 19
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_REQUIRED_RESPONSE_TIME_SOURCE_MASK 0x0000000000080000
/* Description RESERVED_5A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_5A_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_5A_LSB 20
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_5A_MSB 25
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_RESERVED_5A_MASK 0x0000000003f00000
/* Description U_SIG_PUNCTURE_PATTERN_ENCODING
6-bit value copied from 'RX_RESPONSE_REQUIRED_INFO' and 'TX_CBF_INFO'
to pass on to PDG
<legal 0-29>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_U_SIG_PUNCTURE_PATTERN_ENCODING_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_U_SIG_PUNCTURE_PATTERN_ENCODING_LSB 26
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_U_SIG_PUNCTURE_PATTERN_ENCODING_MSB 31
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_U_SIG_PUNCTURE_PATTERN_ENCODING_MASK 0x00000000fc000000
/* Description MLO_STA_ID_DETAILS_RX
16-bi value copied from 'RX_RESPONSE_REQUIRED_INFO' to pass
on to PDG
Bits 10 and 11 are not valid, bits [9:0] reflect 'NSTR_MLO_STA_ID'
from address search.
See definition of mlo_sta_id_details.
*/
/* Description NSTR_MLO_STA_ID
ID of peer participating in non-STR MLO
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_LSB 32
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MSB 41
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MASK 0x000003ff00000000
/* Description BLOCK_SELF_ML_SYNC
Only valid for TX
When set, this provides an indication to block the peer
for self-link.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_LSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MSB 42
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MASK 0x0000040000000000
/* Description BLOCK_PARTNER_ML_SYNC
Only valid for TX
When set, this provides an indication to block the peer
for partner links.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_LSB 43
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MSB 43
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MASK 0x0000080000000000
/* Description NSTR_MLO_STA_ID_VALID
All the fields in this TLV are valid only if this bit is
set.
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_LSB 44
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MSB 44
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MASK 0x0000100000000000
/* Description RESERVED_0A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_RESERVED_0A_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_RESERVED_0A_LSB 45
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MSB 47
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MASK 0x0000e00000000000
/* Description REQUIRED_RESPONSE_TIME
When non-zero, indicates that PDG shall pad the response
transmission to the indicated duration (in us)
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_REQUIRED_RESPONSE_TIME_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_REQUIRED_RESPONSE_TIME_LSB 48
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_REQUIRED_RESPONSE_TIME_MSB 59
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_REQUIRED_RESPONSE_TIME_MASK 0x0fff000000000000
/* Description DOT11BE_PARAMS_PLACEHOLDER
4 bytes for use as placeholders for 'Dot11be_*' parameters
*/
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11BE_PARAMS_PLACEHOLDER_OFFSET 0x00000000000000b0
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11BE_PARAMS_PLACEHOLDER_LSB 60
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11BE_PARAMS_PLACEHOLDER_MSB 63
#define PCU_PPDU_SETUP_INIT_RESPONSE_TO_RESPONSE_RATE_INFO_BW320_DOT11BE_PARAMS_PLACEHOLDER_MASK 0xf000000000000000
/* Description R2R_HW_RESPONSE_TX_DURATION
Field only valid in case of Response_to_response set to
SU_BA or MU_BA
The amount of time the transmission of the HW response to
response will take (in us)
Used for coex as well as e.g. for sync MLO to align R2R
times on the medium across multiple channels
This field also represents the 'alt_hw_response_tx_duration'.
Note that this implies that no different duration can be
programmed for the default and alt setting. SW should program
the worst case value in the RXPCU table in case they are
different.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_R2R_HW_RESPONSE_TX_DURATION_OFFSET 0x00000000000000b8
#define PCU_PPDU_SETUP_INIT_R2R_HW_RESPONSE_TX_DURATION_LSB 0
#define PCU_PPDU_SETUP_INIT_R2R_HW_RESPONSE_TX_DURATION_MSB 15
#define PCU_PPDU_SETUP_INIT_R2R_HW_RESPONSE_TX_DURATION_MASK 0x000000000000ffff
/* Description R2R_RX_DURATION_FIELD
Field only valid in case of Response_to_response set to
SU_BA or MU_BA
The duration field assumed to have been received in the
response frame and what will be used in the duration field
calculation for the response_to_response_Frame
PDG uses this field to calculate what the duration field
value should be in the response frame.
This is returned to the TXPCU
Note that if PDG has protection in place to wrap around...
I the actual transmit time is larger then the value programmed
here, PDG HW will set the duration field in the response
to response frame to zero.
This field is used in 11ah mode as well
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_R2R_RX_DURATION_FIELD_OFFSET 0x00000000000000b8
#define PCU_PPDU_SETUP_INIT_R2R_RX_DURATION_FIELD_LSB 16
#define PCU_PPDU_SETUP_INIT_R2R_RX_DURATION_FIELD_MSB 31
#define PCU_PPDU_SETUP_INIT_R2R_RX_DURATION_FIELD_MASK 0x00000000ffff0000
/* Description R2R_GROUP_ID
Field only valid in case of Response_to_response set to
SU_BA or MU_BA
Specifies the Group ID to be used in the response to response
frame.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_R2R_GROUP_ID_OFFSET 0x00000000000000b8
#define PCU_PPDU_SETUP_INIT_R2R_GROUP_ID_LSB 32
#define PCU_PPDU_SETUP_INIT_R2R_GROUP_ID_MSB 37
#define PCU_PPDU_SETUP_INIT_R2R_GROUP_ID_MASK 0x0000003f00000000
/* Description R2R_RESPONSE_FRAME_TYPE
Field only valid in case of Response_to_response set to
SU_BA or MU_BA
Response_frame_type to be indicated in the PDG_RESPONSE
TLV for the response to response frame.
Coex related field
<enum 0 Non_11ah_ACK >
<enum 1 Non_11ah_BA > also used for M-BA
<enum 2 Non_11ah_CTS >
<enum 3 AH_NDP_CTS>
<enum 4 AH_NDP_ACK>
<enum 5 AH_NDP_BA>
<enum 6 AH_NDP_MOD_ACK>
<enum 7 AH_Normal_ACK>
<enum 8 AH_Normal_BA>
<enum 9 RTT_ACK>
<enum 10 CBF_RESPONSE>
<enum 11 MBA> This can be a multi STA BA or multi TID BA
<enum 12 Ranging_NDP>
<enum 13 LMR_RESPONSE> NDP followed by LMR response for
Rx ranging NDPA followed by NDP
<legal 0-12>
*/
#define PCU_PPDU_SETUP_INIT_R2R_RESPONSE_FRAME_TYPE_OFFSET 0x00000000000000b8
#define PCU_PPDU_SETUP_INIT_R2R_RESPONSE_FRAME_TYPE_LSB 38
#define PCU_PPDU_SETUP_INIT_R2R_RESPONSE_FRAME_TYPE_MSB 41
#define PCU_PPDU_SETUP_INIT_R2R_RESPONSE_FRAME_TYPE_MASK 0x000003c000000000
/* Description R2R_STA_PARTIAL_AID
Field only valid in case of Response_to_response set to
SU_BA or MU_BA
Specifies the partial AID of the response to response frame
in case it is transmitted at VHT rates.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_R2R_STA_PARTIAL_AID_OFFSET 0x00000000000000b8
#define PCU_PPDU_SETUP_INIT_R2R_STA_PARTIAL_AID_LSB 42
#define PCU_PPDU_SETUP_INIT_R2R_STA_PARTIAL_AID_MSB 52
#define PCU_PPDU_SETUP_INIT_R2R_STA_PARTIAL_AID_MASK 0x001ffc0000000000
/* Description USE_ADDRESS_FIELDS_FOR_PROTECTION
When set, the protection_frame_ad1/ad2 fields are to be
used for RTS/CTS2S frames
When set and not disabled through a TXPCU register bit,
the protection_frame_ad2* fields are also copied to the
tx_ad2* fields of the 'EXPECTED_RESPONSE' TLV (i.e. the
expected response Rx AD1) to RXPCU for all frames.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_USE_ADDRESS_FIELDS_FOR_PROTECTION_OFFSET 0x00000000000000b8
#define PCU_PPDU_SETUP_INIT_USE_ADDRESS_FIELDS_FOR_PROTECTION_LSB 53
#define PCU_PPDU_SETUP_INIT_USE_ADDRESS_FIELDS_FOR_PROTECTION_MSB 53
#define PCU_PPDU_SETUP_INIT_USE_ADDRESS_FIELDS_FOR_PROTECTION_MASK 0x0020000000000000
/* Description R2R_SET_REQUIRED_RESPONSE_TIME
Field only valid in case of response to response
When set, TXPCU shall copy the R2R_Hw_response_tx_duration
field and pass it on to PDG in field required_response_time
in 'PDG_RESPONSE.'
This allows SW to force an R2R time e.g. in case of sync
MLO, making sure that the R2R times on the medium for multiple
links are aligned.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_R2R_SET_REQUIRED_RESPONSE_TIME_OFFSET 0x00000000000000b8
#define PCU_PPDU_SETUP_INIT_R2R_SET_REQUIRED_RESPONSE_TIME_LSB 54
#define PCU_PPDU_SETUP_INIT_R2R_SET_REQUIRED_RESPONSE_TIME_MSB 54
#define PCU_PPDU_SETUP_INIT_R2R_SET_REQUIRED_RESPONSE_TIME_MASK 0x0040000000000000
/* Description RESERVED_29A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESERVED_29A_OFFSET 0x00000000000000b8
#define PCU_PPDU_SETUP_INIT_RESERVED_29A_LSB 55
#define PCU_PPDU_SETUP_INIT_RESERVED_29A_MSB 57
#define PCU_PPDU_SETUP_INIT_RESERVED_29A_MASK 0x0380000000000000
/* Description R2R_BW20_ACTIVE_CHANNEL
Field only valid for 20 BW
NOTE: This field is also known as R2R_active_channel_pattern_0
in case punctured transmission is enabled.
This field indicates the active frequency band when the
initial trigger frame transmission was in 20 MHz
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_R2R_BW20_ACTIVE_CHANNEL_OFFSET 0x00000000000000b8
#define PCU_PPDU_SETUP_INIT_R2R_BW20_ACTIVE_CHANNEL_LSB 58
#define PCU_PPDU_SETUP_INIT_R2R_BW20_ACTIVE_CHANNEL_MSB 60
#define PCU_PPDU_SETUP_INIT_R2R_BW20_ACTIVE_CHANNEL_MASK 0x1c00000000000000
/* Description R2R_BW40_ACTIVE_CHANNEL
Field only valid for 40 BW
NOTE: This field is also known as R2R_active_channel_pattern_1
in case punctured transmission is enabled.
This field indicates the active frequency band when the
initial trigger frame transmission was in 40 MHz
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_R2R_BW40_ACTIVE_CHANNEL_OFFSET 0x00000000000000b8
#define PCU_PPDU_SETUP_INIT_R2R_BW40_ACTIVE_CHANNEL_LSB 61
#define PCU_PPDU_SETUP_INIT_R2R_BW40_ACTIVE_CHANNEL_MSB 63
#define PCU_PPDU_SETUP_INIT_R2R_BW40_ACTIVE_CHANNEL_MASK 0xe000000000000000
/* Description R2R_BW80_ACTIVE_CHANNEL
Field only valid for 80 BW
NOTE: This field is also known as R2R_active_channel_pattern_2
in case punctured transmission is enabled.
This field indicates the active frequency band when the
initial trigger frame transmission was in 80 MHz
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_R2R_BW80_ACTIVE_CHANNEL_OFFSET 0x00000000000000c0
#define PCU_PPDU_SETUP_INIT_R2R_BW80_ACTIVE_CHANNEL_LSB 0
#define PCU_PPDU_SETUP_INIT_R2R_BW80_ACTIVE_CHANNEL_MSB 2
#define PCU_PPDU_SETUP_INIT_R2R_BW80_ACTIVE_CHANNEL_MASK 0x0000000000000007
/* Description R2R_BW160_ACTIVE_CHANNEL
Field only valid for 160 BW
NOTE: This field is also known as R2R_active_channel_pattern_3
in case punctured transmission is enabled.
This field indicates the active frequency band when the
initial trigger frame transmission was in 160 MHz
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_R2R_BW160_ACTIVE_CHANNEL_OFFSET 0x00000000000000c0
#define PCU_PPDU_SETUP_INIT_R2R_BW160_ACTIVE_CHANNEL_LSB 3
#define PCU_PPDU_SETUP_INIT_R2R_BW160_ACTIVE_CHANNEL_MSB 5
#define PCU_PPDU_SETUP_INIT_R2R_BW160_ACTIVE_CHANNEL_MASK 0x0000000000000038
/* Description R2R_BW240_ACTIVE_CHANNEL
Field only valid for 240 BW
NOTE: This field is also known as R2R_active_channel_pattern_4
in case punctured transmission is enabled.
This field indicates the active frequency band when the
initial trigger frame transmission was in 240 MHz
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_R2R_BW240_ACTIVE_CHANNEL_OFFSET 0x00000000000000c0
#define PCU_PPDU_SETUP_INIT_R2R_BW240_ACTIVE_CHANNEL_LSB 6
#define PCU_PPDU_SETUP_INIT_R2R_BW240_ACTIVE_CHANNEL_MSB 8
#define PCU_PPDU_SETUP_INIT_R2R_BW240_ACTIVE_CHANNEL_MASK 0x00000000000001c0
/* Description R2R_BW320_ACTIVE_CHANNEL
Field only valid for 320 BW
NOTE: This field is also known as R2R_active_channel_pattern_5
in case punctured transmission is enabled.
This field indicates the active frequency band when the
initial trigger frame transmission was in 320 MHz
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_R2R_BW320_ACTIVE_CHANNEL_OFFSET 0x00000000000000c0
#define PCU_PPDU_SETUP_INIT_R2R_BW320_ACTIVE_CHANNEL_LSB 9
#define PCU_PPDU_SETUP_INIT_R2R_BW320_ACTIVE_CHANNEL_MSB 11
#define PCU_PPDU_SETUP_INIT_R2R_BW320_ACTIVE_CHANNEL_MASK 0x0000000000000e00
/* Description R2R_BW20
The BW for the response to response frame when the initial
trigger frame transmission was in 20 MHz
NOTE: This field is also known as R2R_pattern_0 in case
punctured transmission is enabled.
<enum 0 20_mhz>20 Mhz BW
<enum 1 40_mhz>40 Mhz BW
<enum 2 80_mhz>80 Mhz BW
<enum 3 160_mhz>160 Mhz BW
<enum 4 320_mhz>320 Mhz BW
<enum 5 240_mhz>240 Mhz BW
*/
#define PCU_PPDU_SETUP_INIT_R2R_BW20_OFFSET 0x00000000000000c0
#define PCU_PPDU_SETUP_INIT_R2R_BW20_LSB 12
#define PCU_PPDU_SETUP_INIT_R2R_BW20_MSB 14
#define PCU_PPDU_SETUP_INIT_R2R_BW20_MASK 0x0000000000007000
/* Description R2R_BW40
The BW for the response to response frame when the initial
trigger frame transmission was in 40 MHz
NOTE: This field is also known as R2R_pattern_1 in case
punctured transmission is enabled.
<enum 0 20_mhz>20 Mhz BW
<enum 1 40_mhz>40 Mhz BW
<enum 2 80_mhz>80 Mhz BW
<enum 3 160_mhz>160 Mhz BW
<enum 4 320_mhz>320 Mhz BW
<enum 5 240_mhz>240 Mhz BW
*/
#define PCU_PPDU_SETUP_INIT_R2R_BW40_OFFSET 0x00000000000000c0
#define PCU_PPDU_SETUP_INIT_R2R_BW40_LSB 15
#define PCU_PPDU_SETUP_INIT_R2R_BW40_MSB 17
#define PCU_PPDU_SETUP_INIT_R2R_BW40_MASK 0x0000000000038000
/* Description R2R_BW80
The BW for the response to response frame when the initial
trigger frame transmission was in 80 MHz
NOTE: This field is also known as R2R_pattern_2 in case
punctured transmission is enabled.
<enum 0 20_mhz>20 Mhz BW
<enum 1 40_mhz>40 Mhz BW
<enum 2 80_mhz>80 Mhz BW
<enum 3 160_mhz>160 Mhz BW
<enum 4 320_mhz>320 Mhz BW
<enum 5 240_mhz>240 Mhz BW
*/
#define PCU_PPDU_SETUP_INIT_R2R_BW80_OFFSET 0x00000000000000c0
#define PCU_PPDU_SETUP_INIT_R2R_BW80_LSB 18
#define PCU_PPDU_SETUP_INIT_R2R_BW80_MSB 20
#define PCU_PPDU_SETUP_INIT_R2R_BW80_MASK 0x00000000001c0000
/* Description R2R_BW160
The BW for the response to response frame when the initial
trigger frame transmission was in 160 MHz
NOTE: This field is also known as R2R_pattern_3 in case
punctured transmission is enabled.
<enum 0 20_mhz>20 Mhz BW
<enum 1 40_mhz>40 Mhz BW
<enum 2 80_mhz>80 Mhz BW
<enum 3 160_mhz>160 Mhz BW
<enum 4 320_mhz>320 Mhz BW
<enum 5 240_mhz>240 Mhz BW
*/
#define PCU_PPDU_SETUP_INIT_R2R_BW160_OFFSET 0x00000000000000c0
#define PCU_PPDU_SETUP_INIT_R2R_BW160_LSB 21
#define PCU_PPDU_SETUP_INIT_R2R_BW160_MSB 23
#define PCU_PPDU_SETUP_INIT_R2R_BW160_MASK 0x0000000000e00000
/* Description R2R_BW240
The BW for the response to response frame when the initial
trigger frame transmission was in 240 MHz
NOTE: This field is also known as R2R_pattern_4 in case
punctured transmission is enabled.
<enum 0 20_mhz>20 Mhz BW
<enum 1 40_mhz>40 Mhz BW
<enum 2 80_mhz>80 Mhz BW
<enum 3 160_mhz>160 Mhz BW
<enum 4 320_mhz>320 Mhz BW
<enum 5 240_mhz>240 Mhz BW
*/
#define PCU_PPDU_SETUP_INIT_R2R_BW240_OFFSET 0x00000000000000c0
#define PCU_PPDU_SETUP_INIT_R2R_BW240_LSB 24
#define PCU_PPDU_SETUP_INIT_R2R_BW240_MSB 26
#define PCU_PPDU_SETUP_INIT_R2R_BW240_MASK 0x0000000007000000
/* Description R2R_BW320
The BW for the response to response frame when the initial
trigger frame transmission was in 320 MHz
NOTE: This field is also known as R2R_pattern_5 in case
punctured transmission is enabled.
<enum 0 20_mhz>20 Mhz BW
<enum 1 40_mhz>40 Mhz BW
<enum 2 80_mhz>80 Mhz BW
<enum 3 160_mhz>160 Mhz BW
<enum 4 320_mhz>320 Mhz BW
<enum 5 240_mhz>240 Mhz BW
*/
#define PCU_PPDU_SETUP_INIT_R2R_BW320_OFFSET 0x00000000000000c0
#define PCU_PPDU_SETUP_INIT_R2R_BW320_LSB 27
#define PCU_PPDU_SETUP_INIT_R2R_BW320_MSB 29
#define PCU_PPDU_SETUP_INIT_R2R_BW320_MASK 0x0000000038000000
/* Description RESERVED_30A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESERVED_30A_OFFSET 0x00000000000000c0
#define PCU_PPDU_SETUP_INIT_RESERVED_30A_LSB 30
#define PCU_PPDU_SETUP_INIT_RESERVED_30A_MSB 31
#define PCU_PPDU_SETUP_INIT_RESERVED_30A_MASK 0x00000000c0000000
/* Description MU_RESPONSE_EXPECTED_BITMAP_31_0
Field only valid in case of MU transmission and a response
from other or more then just user0 is expected.
Note that this implies that for all legacy SU exchanges,
or legacy MU-MIMO where only user 0 can get a response,
this field does not need to be programmed by SW. All existing
programming remains backwards compatible.
Bit 0 represents user 0
Bit 1 represents user 1
...
When set, a response from this user is expected, and TXPCU
shall generate the 'tx_fes_status_user_response' TLV for
this user
Note that the number of bits set in bitmap fields 0 - 36
(including next field), shall always be equal or greater
then the number indicated in field: Required_UL_MU_resp_user_count
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MU_RESPONSE_EXPECTED_BITMAP_31_0_OFFSET 0x00000000000000c0
#define PCU_PPDU_SETUP_INIT_MU_RESPONSE_EXPECTED_BITMAP_31_0_LSB 32
#define PCU_PPDU_SETUP_INIT_MU_RESPONSE_EXPECTED_BITMAP_31_0_MSB 63
#define PCU_PPDU_SETUP_INIT_MU_RESPONSE_EXPECTED_BITMAP_31_0_MASK 0xffffffff00000000
/* Description MU_RESPONSE_EXPECTED_BITMAP_36_32
Field only valid in case of MU transmission and a response
from other or more then just user0 is expected.
Note that this implies that for all legacy SU exchanges,
or legacy MU-MIMO where only user 0 can get a response,
this field does not need to be programmed by SW. All existing
programming remains backwards compatible.
Bit 0 represents user 32
Bit 1 represents user 33
...
When set, a response from this user is expected, and TXPCU
shall generate the 'tx_fes_status_user_response' TLV for
this user
Note that the number of bits set in bitmap fields 0 - 36
(including previous field), shall always be equal or greater
then the number indicated in field: Required_UL_MU_resp_user_count
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MU_RESPONSE_EXPECTED_BITMAP_36_32_OFFSET 0x00000000000000c8
#define PCU_PPDU_SETUP_INIT_MU_RESPONSE_EXPECTED_BITMAP_36_32_LSB 0
#define PCU_PPDU_SETUP_INIT_MU_RESPONSE_EXPECTED_BITMAP_36_32_MSB 4
#define PCU_PPDU_SETUP_INIT_MU_RESPONSE_EXPECTED_BITMAP_36_32_MASK 0x000000000000001f
/* Description MU_EXPECTED_RESPONSE_CBF_COUNT
Field only valid when Response_type == MU_CBF_expected
The number of STAs that are expected to send a CBF back
Note that the actual amount could be smaller....
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MU_EXPECTED_RESPONSE_CBF_COUNT_OFFSET 0x00000000000000c8
#define PCU_PPDU_SETUP_INIT_MU_EXPECTED_RESPONSE_CBF_COUNT_LSB 5
#define PCU_PPDU_SETUP_INIT_MU_EXPECTED_RESPONSE_CBF_COUNT_MSB 10
#define PCU_PPDU_SETUP_INIT_MU_EXPECTED_RESPONSE_CBF_COUNT_MASK 0x00000000000007e0
/* Description MU_EXPECTED_RESPONSE_STA_COUNT
SW shall program this field if the number of STAs that are
expected to send something (ACK, DATA, BA, CBF, etc...)
back is 2 or larger..
The number of STAs that are expected to send a response
back.
Note that the actual amount could be smaller....
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_MU_EXPECTED_RESPONSE_STA_COUNT_OFFSET 0x00000000000000c8
#define PCU_PPDU_SETUP_INIT_MU_EXPECTED_RESPONSE_STA_COUNT_LSB 11
#define PCU_PPDU_SETUP_INIT_MU_EXPECTED_RESPONSE_STA_COUNT_MSB 16
#define PCU_PPDU_SETUP_INIT_MU_EXPECTED_RESPONSE_STA_COUNT_MASK 0x000000000001f800
/* Description TRANSMIT_INCLUDES_MULTIDESTINATION
Used by TXPCU
When set, the MD (Multi Destination) feature is used for
this transmission. Either for real multi destination STA
transmissions or Multi TID transmissions.
Used by TXPCU to know when it can start pre-fetching data
in order to do BW constrained frame drops.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_TRANSMIT_INCLUDES_MULTIDESTINATION_OFFSET 0x00000000000000c8
#define PCU_PPDU_SETUP_INIT_TRANSMIT_INCLUDES_MULTIDESTINATION_LSB 17
#define PCU_PPDU_SETUP_INIT_TRANSMIT_INCLUDES_MULTIDESTINATION_MSB 17
#define PCU_PPDU_SETUP_INIT_TRANSMIT_INCLUDES_MULTIDESTINATION_MASK 0x0000000000020000
/* Description INSERT_PREV_TX_START_TIMING_INFO
When set, TXPCU will insert the value in TXPCU register "prev_phy_tx_start_transmit_time"
in the transmit frame at the byte location indicated by
field tx_start_transmit_time_byte_offset
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_INSERT_PREV_TX_START_TIMING_INFO_OFFSET 0x00000000000000c8
#define PCU_PPDU_SETUP_INIT_INSERT_PREV_TX_START_TIMING_INFO_LSB 18
#define PCU_PPDU_SETUP_INIT_INSERT_PREV_TX_START_TIMING_INFO_MSB 18
#define PCU_PPDU_SETUP_INIT_INSERT_PREV_TX_START_TIMING_INFO_MASK 0x0000000000040000
/* Description INSERT_CURRENT_TX_START_TIMING_INFO
When set, TXPCU will insert the value in TXPCU register "current_phy_tx_start_transmit_time"
in the transmit frame at the byte location indicated by
field tx_start_transmit_time_byte_offset
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_INSERT_CURRENT_TX_START_TIMING_INFO_OFFSET 0x00000000000000c8
#define PCU_PPDU_SETUP_INIT_INSERT_CURRENT_TX_START_TIMING_INFO_LSB 19
#define PCU_PPDU_SETUP_INIT_INSERT_CURRENT_TX_START_TIMING_INFO_MSB 19
#define PCU_PPDU_SETUP_INIT_INSERT_CURRENT_TX_START_TIMING_INFO_MASK 0x0000000000080000
/* Description TX_START_TRANSMIT_TIME_BYTE_OFFSET
Field only valid when insert_prev_tx_start_timing_info or
insert_current_tx_start_timing_info is set.
Start byte offset where the 'start_time' needs to be overwritten
in the frame
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_TX_START_TRANSMIT_TIME_BYTE_OFFSET_OFFSET 0x00000000000000c8
#define PCU_PPDU_SETUP_INIT_TX_START_TRANSMIT_TIME_BYTE_OFFSET_LSB 20
#define PCU_PPDU_SETUP_INIT_TX_START_TRANSMIT_TIME_BYTE_OFFSET_MSB 31
#define PCU_PPDU_SETUP_INIT_TX_START_TRANSMIT_TIME_BYTE_OFFSET_MASK 0x00000000fff00000
/* Description PROTECTION_FRAME_AD1_31_0
Field only valid when use_address_fields_for_protection
is set
The Least Significant 4 bytes of the Protection Frame MAC
Address AD1
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD1_31_0_OFFSET 0x00000000000000c8
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD1_31_0_LSB 32
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD1_31_0_MSB 63
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD1_31_0_MASK 0xffffffff00000000
/* Description PROTECTION_FRAME_AD1_47_32
Field only valid when use_address_fields_for_protection
is set
The 2 most significant bytes of the Protection Frame MAC
Address AD1
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD1_47_32_OFFSET 0x00000000000000d0
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD1_47_32_LSB 0
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD1_47_32_MSB 15
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD1_47_32_MASK 0x000000000000ffff
/* Description PROTECTION_FRAME_AD2_15_0
Field only valid when use_address_fields_for_protection
is set
The Least Significant 2 bytes of the MAC Address AD2
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD2_15_0_OFFSET 0x00000000000000d0
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD2_15_0_LSB 16
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD2_15_0_MSB 31
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD2_15_0_MASK 0x00000000ffff0000
/* Description PROTECTION_FRAME_AD2_47_16
Field only valid when use_address_fields_for_protection
is set
The 4 most significant bytes of the MAC Address AD2
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD2_47_16_OFFSET 0x00000000000000d0
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD2_47_16_LSB 32
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD2_47_16_MSB 63
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD2_47_16_MASK 0xffffffff00000000
/* Description DYNAMIC_MEDIUM_PROT_THRESHOLD
Threshold to enable the dynamic medium protection feature
in terms of PPDU duration in us or PSDU length in bytes
This is set to zero to disable the dynamic medium protection
feature.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_DYNAMIC_MEDIUM_PROT_THRESHOLD_OFFSET 0x00000000000000d8
#define PCU_PPDU_SETUP_INIT_DYNAMIC_MEDIUM_PROT_THRESHOLD_LSB 0
#define PCU_PPDU_SETUP_INIT_DYNAMIC_MEDIUM_PROT_THRESHOLD_MSB 23
#define PCU_PPDU_SETUP_INIT_DYNAMIC_MEDIUM_PROT_THRESHOLD_MASK 0x0000000000ffffff
/* Description DYNAMIC_MEDIUM_PROT_TYPE
<enum 0 dyn_medium_prot_byte> dynamic_medium_prot_threshold
indicates PSDU length in bytes.
<enum 1 dyn_medium_prot_us>
dynamic_medium_prot_threshold indicates PPDU duration in
us.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_DYNAMIC_MEDIUM_PROT_TYPE_OFFSET 0x00000000000000d8
#define PCU_PPDU_SETUP_INIT_DYNAMIC_MEDIUM_PROT_TYPE_LSB 24
#define PCU_PPDU_SETUP_INIT_DYNAMIC_MEDIUM_PROT_TYPE_MSB 24
#define PCU_PPDU_SETUP_INIT_DYNAMIC_MEDIUM_PROT_TYPE_MASK 0x0000000001000000
/* Description RESERVED_54A
<legal 0>
*/
#define PCU_PPDU_SETUP_INIT_RESERVED_54A_OFFSET 0x00000000000000d8
#define PCU_PPDU_SETUP_INIT_RESERVED_54A_LSB 25
#define PCU_PPDU_SETUP_INIT_RESERVED_54A_MSB 31
#define PCU_PPDU_SETUP_INIT_RESERVED_54A_MASK 0x00000000fe000000
/* Description PROTECTION_FRAME_AD3_31_0
Field only valid when use_address_fields_for_protection
is set
The least significant 4 bytes of the Protection Frame MAC
Address AD3
Hamilton v1 did not include this (and any subsequent) word.
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD3_31_0_OFFSET 0x00000000000000d8
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD3_31_0_LSB 32
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD3_31_0_MSB 63
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD3_31_0_MASK 0xffffffff00000000
/* Description PROTECTION_FRAME_AD3_47_32
Field only valid when use_address_fields_for_protection
is set
The 2 most significant bytes of the Protection Frame MAC
Address AD3
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD3_47_32_OFFSET 0x00000000000000e0
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD3_47_32_LSB 0
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD3_47_32_MSB 15
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD3_47_32_MASK 0x000000000000ffff
/* Description PROTECTION_FRAME_AD4_15_0
Field only valid when use_address_fields_for_protection
is set
The least significant 2 bytes of the Protection Frame MAC
Address AD4
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD4_15_0_OFFSET 0x00000000000000e0
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD4_15_0_LSB 16
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD4_15_0_MSB 31
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD4_15_0_MASK 0x00000000ffff0000
/* Description PROTECTION_FRAME_AD4_47_16
Field only valid when use_address_fields_for_protection
is set
The 4 most significant bytes of the Protection Frame MAC
Address AD4
<legal all>
*/
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD4_47_16_OFFSET 0x00000000000000e0
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD4_47_16_LSB 32
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD4_47_16_MSB 63
#define PCU_PPDU_SETUP_INIT_PROTECTION_FRAME_AD4_47_16_MASK 0xffffffff00000000
#endif // PCU_PPDU_SETUP_INIT
Reference in New Issue View Git Blame Copy Permalink