Dosyalar
android_kernel_samsung_sm86…/hw/qca5332/l_sig_a_info.h
Sajini R 36637cf177 fw-api: Add ipq5332 target header files to fw-api project
Added ipq5332 target header files under qca5332 to make fw-api
project compatible to host.

Change-Id: Iee6b3f2a809f31e62b45a0f6e9a7cbb66e070fa0
2022-09-06 06:30:14 -07:00

210 satır
8.7 KiB
C

/* Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _L_SIG_A_INFO_H_
#define _L_SIG_A_INFO_H_
#if !defined(__ASSEMBLER__)
#endif
#define NUM_OF_DWORDS_L_SIG_A_INFO 1
struct l_sig_a_info {
#ifndef WIFI_BIT_ORDER_BIG_ENDIAN
uint32_t rate : 4, // [3:0]
lsig_reserved : 1, // [4:4]
length : 12, // [16:5]
parity : 1, // [17:17]
tail : 6, // [23:18]
pkt_type : 4, // [27:24]
captured_implicit_sounding : 1, // [28:28]
reserved : 2, // [30:29]
rx_integrity_check_passed : 1; // [31:31]
#else
uint32_t rx_integrity_check_passed : 1, // [31:31]
reserved : 2, // [30:29]
captured_implicit_sounding : 1, // [28:28]
pkt_type : 4, // [27:24]
tail : 6, // [23:18]
parity : 1, // [17:17]
length : 12, // [16:5]
lsig_reserved : 1, // [4:4]
rate : 4; // [3:0]
#endif
};
/* Description RATE
This format is originally defined for OFDM as a 4 bit field
but the 5th bit was added to indicate 11b formatted frames.
In the standard bit [4] is specified as reserved. For
11b frames this L-SIG is transformed in the PHY into the
11b preamble format. The following are the rates:
<enum 8 ofdm_48_mbps> 64-QAM 2/3 (48 Mbps)
<enum 9 ofdm_24_mbps> 16-QAM 1/2 (24 Mbps)
<enum 10 ofdm_12_mbps> QPSK 1/2 (12 Mbps)
<enum 11 ofdm_6_mbps> BPSK 1/2 (6 Mbps)
<enum 12 ofdm_54_mbps> 64-QAM 3/4 (54 Mbps)
<enum 13 ofdm_36_mbps> 16-QAM 3/4 (36 Mbps)
<enum 14 ofdm_18_mbps> QPSK 1/2 (18 Mbps)
<enum 15 ofdm_9_mbps> BPSK 3/4 (9 Mbps)
<legal 8-15>
*/
#define L_SIG_A_INFO_RATE_OFFSET 0x00000000
#define L_SIG_A_INFO_RATE_LSB 0
#define L_SIG_A_INFO_RATE_MSB 3
#define L_SIG_A_INFO_RATE_MASK 0x0000000f
/* Description LSIG_RESERVED
Reserved: Should be set to 0 by the MAC and ignored by the
PHY
<legal 0>
*/
#define L_SIG_A_INFO_LSIG_RESERVED_OFFSET 0x00000000
#define L_SIG_A_INFO_LSIG_RESERVED_LSB 4
#define L_SIG_A_INFO_LSIG_RESERVED_MSB 4
#define L_SIG_A_INFO_LSIG_RESERVED_MASK 0x00000010
/* Description LENGTH
The length indicates the number of octets in this MPDU.
Note that when using mixed mode .11n preamble or .11ac/.11ax/.11ba/.11be
this length provides the spoofed length for the PPDU.
This length provides part of the information (viz. PPDU
duration) to derive the actually PSDU length. For legacy
OFDM and 11B frames the maximum length is 4095.
<legal all>
*/
#define L_SIG_A_INFO_LENGTH_OFFSET 0x00000000
#define L_SIG_A_INFO_LENGTH_LSB 5
#define L_SIG_A_INFO_LENGTH_MSB 16
#define L_SIG_A_INFO_LENGTH_MASK 0x0001ffe0
/* Description PARITY
11a/n/ac TX: This field provides even parity over the first
18 bits of the signal field which means that the sum of
1s in the signal field will always be even on transmission.
The value of the field is computed by the MAC.
11a/n/ac RX: this field contains the received parity field
from the L-SIG symbol for the current packet.
<legal 0-1>
*/
#define L_SIG_A_INFO_PARITY_OFFSET 0x00000000
#define L_SIG_A_INFO_PARITY_LSB 17
#define L_SIG_A_INFO_PARITY_MSB 17
#define L_SIG_A_INFO_PARITY_MASK 0x00020000
/* Description TAIL
The 6 bits of tail is always set to 0 is used to flush the
BCC encoder and decoder. <legal 0>
*/
#define L_SIG_A_INFO_TAIL_OFFSET 0x00000000
#define L_SIG_A_INFO_TAIL_LSB 18
#define L_SIG_A_INFO_TAIL_MSB 23
#define L_SIG_A_INFO_TAIL_MASK 0x00fc0000
/* Description PKT_TYPE
Only used on the RX side.
Note: This is not really part of L-SIG
Packet type:
<enum 0 dot11a>802.11a PPDU type
<enum 1 dot11b>802.11b PPDU type
<enum 2 dot11n_mm>802.11n Mixed Mode PPDU type
<enum 3 dot11ac>802.11ac PPDU type
<enum 4 dot11ax>802.11ax PPDU type
<enum 5 dot11ba>802.11ba (WUR) PPDU type
<enum 6 dot11be>802.11be PPDU type
<enum 7 dot11az>802.11az (ranging) PPDU type
<enum 8 dot11n_gf>802.11n Green Field PPDU type (unsupported
& aborted)
*/
#define L_SIG_A_INFO_PKT_TYPE_OFFSET 0x00000000
#define L_SIG_A_INFO_PKT_TYPE_LSB 24
#define L_SIG_A_INFO_PKT_TYPE_MSB 27
#define L_SIG_A_INFO_PKT_TYPE_MASK 0x0f000000
/* Description CAPTURED_IMPLICIT_SOUNDING
Only used on the RX side.
Note: This is not really part of L-SIG
This indicates that the PHY has captured implicit sounding.
*/
#define L_SIG_A_INFO_CAPTURED_IMPLICIT_SOUNDING_OFFSET 0x00000000
#define L_SIG_A_INFO_CAPTURED_IMPLICIT_SOUNDING_LSB 28
#define L_SIG_A_INFO_CAPTURED_IMPLICIT_SOUNDING_MSB 28
#define L_SIG_A_INFO_CAPTURED_IMPLICIT_SOUNDING_MASK 0x10000000
/* Description RESERVED
Reserved: Should be set to 0 by the transmitting MAC and
ignored by the PHY <legal 0>
*/
#define L_SIG_A_INFO_RESERVED_OFFSET 0x00000000
#define L_SIG_A_INFO_RESERVED_LSB 29
#define L_SIG_A_INFO_RESERVED_MSB 30
#define L_SIG_A_INFO_RESERVED_MASK 0x60000000
/* Description RX_INTEGRITY_CHECK_PASSED
TX side: Set to 0
RX side: Set to 1 if PHY determines the L-SIG integrity
check has passed, else set to 0
<legal all>
*/
#define L_SIG_A_INFO_RX_INTEGRITY_CHECK_PASSED_OFFSET 0x00000000
#define L_SIG_A_INFO_RX_INTEGRITY_CHECK_PASSED_LSB 31
#define L_SIG_A_INFO_RX_INTEGRITY_CHECK_PASSED_MSB 31
#define L_SIG_A_INFO_RX_INTEGRITY_CHECK_PASSED_MASK 0x80000000
#endif // L_SIG_A_INFO