samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Forka 0
Codice Problemi Pull Requests Actions Pacchetti Progetti Rilasci Wiki Attività
Files
88df673d58964d95bef2d79d0f34a3f94c7f92d1
android_kernel_samsung_sm86…/msm/sde_power_handle.h
Dhaval Patel c281b3a879 disp: msm: reserve core clock rate during display disable 
Userspace module may not trigger the atomic check and it
can cause the commit failure. In such case, always reserve
the minimum core clock rate on mmrm module for built-in
displays to avoid the power ON failure.

Change-Id: Iafd92a7b7d1b35befe70b041cbedaec2add40de4
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
2021-09-27 13:44:12 -07:00

380 righe
12 KiB
C
Originale Blame Cronologia

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2016-2021, The Linux Foundation. All rights reserved.
*/
#ifndef _SDE_POWER_HANDLE_H_
#define _SDE_POWER_HANDLE_H_
#define MAX_CLIENT_NAME_LEN 128
#define SDE_POWER_HANDLE_ENABLE_BUS_AB_QUOTA 0
#define SDE_POWER_HANDLE_DISABLE_BUS_AB_QUOTA 0
#define SDE_POWER_HANDLE_ENABLE_BUS_IB_QUOTA 400000000
#define SDE_POWER_HANDLE_ENABLE_NRT_BUS_IB_QUOTA 0
#define SDE_POWER_HANDLE_DISABLE_BUS_IB_QUOTA 0
#define SDE_POWER_HANDLE_CONT_SPLASH_BUS_IB_QUOTA 3000000000ULL
#define SDE_POWER_HANDLE_CONT_SPLASH_BUS_AB_QUOTA 3000000000ULL
#include <linux/sde_io_util.h>
#include <linux/interconnect.h>
/* event will be triggered before power handler disable */
#define SDE_POWER_EVENT_PRE_DISABLE 0x1
/* event will be triggered after power handler disable */
#define SDE_POWER_EVENT_POST_DISABLE 0x2
/* event will be triggered before power handler enable */
#define SDE_POWER_EVENT_PRE_ENABLE 0x4
/* event will be triggered after power handler enable */
#define SDE_POWER_EVENT_POST_ENABLE 0x8
/* event will be triggered during MMRM callback */
#define SDE_POWER_EVENT_MMRM_CALLBACK 0x10
#define DATA_BUS_PATH_MAX 0x2
/*
* The AMC bucket denotes constraints that are applied to hardware when
* icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
* when the execution environment transitions between active and low power mode.
*/
#define QCOM_ICC_BUCKET_AMC 0
#define QCOM_ICC_BUCKET_WAKE 1
#define QCOM_ICC_BUCKET_SLEEP 2
#define QCOM_ICC_NUM_BUCKETS 3
#define QCOM_ICC_TAG_AMC BIT(QCOM_ICC_BUCKET_AMC)
#define QCOM_ICC_TAG_WAKE BIT(QCOM_ICC_BUCKET_WAKE)
#define QCOM_ICC_TAG_SLEEP BIT(QCOM_ICC_BUCKET_SLEEP)
#define QCOM_ICC_TAG_ACTIVE_ONLY (QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
#define QCOM_ICC_TAG_ALWAYS (QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
QCOM_ICC_TAG_SLEEP)
/**
* mdss_bus_vote_type: register bus vote type
* VOTE_INDEX_DISABLE: removes the client vote
* VOTE_INDEX_LOW: keeps the lowest vote for register bus
* VOTE_INDEX_MEDIUM: keeps medium vote for register bus
* VOTE_INDEX_HIGH: keeps the highest vote for register bus
* VOTE_INDEX_MAX: invalid
*/
enum mdss_bus_vote_type {
VOTE_INDEX_DISABLE,
VOTE_INDEX_LOW,
VOTE_INDEX_MEDIUM,
VOTE_INDEX_HIGH,
VOTE_INDEX_MAX,
};
/**
* enum sde_power_handle_data_bus_client - type of axi bus clients
* @SDE_POWER_HANDLE_DATA_BUS_CLIENT_RT: core real-time bus client
* @SDE_POWER_HANDLE_DATA_BUS_CLIENT_NRT: core non-real-time bus client
* @SDE_POWER_HANDLE_DATA_BUS_CLIENT_MAX: maximum number of bus client type
*/
enum sde_power_handle_data_bus_client {
SDE_POWER_HANDLE_DATA_BUS_CLIENT_RT,
SDE_POWER_HANDLE_DATA_BUS_CLIENT_NRT,
SDE_POWER_HANDLE_DATA_BUS_CLIENT_MAX
};
/**
* enum SDE_POWER_HANDLE_DBUS_ID - data bus identifier
* @SDE_POWER_HANDLE_DBUS_ID_MNOC: DPU/MNOC data bus
* @SDE_POWER_HANDLE_DBUS_ID_LLCC: MNOC/LLCC data bus
* @SDE_POWER_HANDLE_DBUS_ID_EBI: LLCC/EBI data bus
*/
enum SDE_POWER_HANDLE_DBUS_ID {
SDE_POWER_HANDLE_DBUS_ID_MNOC,
SDE_POWER_HANDLE_DBUS_ID_LLCC,
SDE_POWER_HANDLE_DBUS_ID_EBI,
SDE_POWER_HANDLE_DBUS_ID_MAX,
};
/**
* struct sde_power_bus_scaling_data: struct for bus setting
* @ab: average bandwidth in bytes per second
* @ib: peak bandwidth in bytes per second
*/
struct sde_power_bus_scaling_data {
uint64_t ab; /* Arbitrated bandwidth */
uint64_t ib; /* Instantaneous bandwidth */
};
/**
* struct sde_power_data_handle: power handle struct for data bus
* @data_bus_hdl: current data bus handle
* @curr_val : save the current bus value
* @data_paths_cnt: number of rt data path ports
*/
struct sde_power_data_bus_handle {
struct icc_path *data_bus_hdl[DATA_BUS_PATH_MAX];
struct sde_power_bus_scaling_data curr_val;
u32 data_paths_cnt;
bool bus_active_only;
};
/**
* struct sde_power_reg_bus_handle: power handle struct for reg bus
* @reg_bus_hdl: reg bus interconnect path handle
* @curr_idx : use-case index in to scale_table for the current vote
* @scale_table: bus scaling bandwidth vote table
*/
struct sde_power_reg_bus_handle {
struct icc_path *reg_bus_hdl;
enum mdss_bus_vote_type curr_idx;
struct sde_power_bus_scaling_data scale_table[VOTE_INDEX_MAX];
};
/*
* struct sde_power_event - local event registration structure
* @client_name: name of the client registering
* @cb_fnc: pointer to desired callback function
* @usr: user pointer to pass to callback event trigger
* @event: refer to SDE_POWER_HANDLE_EVENT_*
* @list: list to attach event master list
* @active: indicates the state of sde power handle
*/
struct sde_power_event {
char client_name[MAX_CLIENT_NAME_LEN];
void (*cb_fnc)(u32 event_type, void *usr);
void *usr;
u32 event_type;
struct list_head list;
bool active;
};
/*
* struct sde_power_mmrm_reserve - mmrm resource reservation for clk and bw
* @clk_name: name of resource reservation clock
* @clk_rate: resource reservation clock rate
*/
struct sde_power_mmrm_reserve {
char clk_name[32];
u64 clk_rate;
};
/**
* struct sde_power_handle: power handle main struct
* @mp: module power for clock and regulator
* @phandle_lock: lock to synchronize the enable/disable
* @dev: pointer to device structure
* @reg_bus_handle: context structure for reg bus control
* @data_bus_handle: context structure for data bus control
* @event_list: current power handle event list
* @rsc_client: sde rsc client pointer
* @rsc_client_init: boolean to control rsc client create
* @mmrm_enable: boolean to indicate if mmrm is enabled
* @ib_quota: ib quota of the given bus
* @mmrm_reserve: mmrm resource reservation
*/
struct sde_power_handle {
struct dss_module_power mp;
struct mutex phandle_lock;
struct device *dev;
struct sde_power_reg_bus_handle reg_bus_handle;
struct sde_power_data_bus_handle data_bus_handle
[SDE_POWER_HANDLE_DBUS_ID_MAX];
struct list_head event_list;
u32 last_event_handled;
struct sde_rsc_client *rsc_client;
bool rsc_client_init;
bool mmrm_enable;
u64 ib_quota[SDE_POWER_HANDLE_DBUS_ID_MAX];
struct sde_power_mmrm_reserve mmrm_reserve;
};
/**
* sde_power_resource_init() - initializes the sde power handle
* @pdev: platform device to search the power resources
* @pdata: power handle to store the power resources
*
* Return: error code.
*/
int sde_power_resource_init(struct platform_device *pdev,
struct sde_power_handle *pdata);
/**
* sde_power_resource_deinit() - release the sde power handle
* @pdev: platform device for power resources
* @pdata: power handle containing the resources
*
* Return: error code.
*/
void sde_power_resource_deinit(struct platform_device *pdev,
struct sde_power_handle *pdata);
/**
* sde_power_resource_enable() - enable/disable the power resources
* @pdata: power handle containing the resources
* @enable: boolean request for enable/disable
*
* Return: error code.
*/
int sde_power_resource_enable(struct sde_power_handle *pdata, bool enable);
/**
* sde_power_scale_reg_bus() - Scale the registers bus for the specified client
* @phandle: power handle containing the resources
* @usecase_ndx: new use case to scale the reg bus
* @skip_lock: will skip holding the power rsrc mutex during the call, this is
* for internal callers that already hold this required lock.
*
* Return: error code.
*/
int sde_power_scale_reg_bus(struct sde_power_handle *phandle,
u32 usecase_ndx, bool skip_lock);
/**
* sde_power_data_bus_state_update() - update data bus state
* @pdata: power handle containing the resources
* @enable: take enable vs disable path
*
* Return: error code.
*/
int sde_power_data_bus_state_update(struct sde_power_handle *phandle,
bool enable);
/**
* sde_power_clk_reserve_rate() - reserve the clock rate with mmrm
* @pdata: power handle containing the resources
* @clock_name: clock name which needs rate update.
* @rate: Requested rate.
*
* Return: error code.
*/
int sde_power_clk_reserve_rate(struct sde_power_handle *pdata, char *clock_name, u64 rate);
/**
* sde_power_clk_set_rate() - set the clock rate
* @pdata: power handle containing the resources
* @clock_name: clock name which needs rate update.
* @rate: Requested rate.
* @flags: Flags to be set for this clk
*
* Return: error code.
*/
int sde_power_clk_set_rate(struct sde_power_handle *pdata, char *clock_name,
u64 rate, u32 flags);
/**
* sde_power_mmrm_set_clk_limit() - sets a limit for mdp core clk
* @clk: pointer to the mdp core clk
* @phandle: power handle containing the resources
* @requested_clk: limit requested for the core clk
*
* This function must be called in a thread different than the
* commit-thread, otherwise it will always fail, since this function
* sends a notification to user-space to reduce the clk, and then it
* waits for the next commit after this call to reduce the clk rate.
* Hence, if the commit-thread is blocked (by this function waiting)
* or if user-space does not send another commit to reduce the clk,
* this function will timeout after some time and fail.
*
* Return: 0 upon succeeding setting the clk to a value lower or
* equal than the 'requested_clk', otherwise it returns an
* error code.
*/
int sde_power_mmrm_set_clk_limit(struct dss_clk *clk,
struct sde_power_handle *phandle, unsigned long requested_clk);
/**
* sde_power_mmrm_get_requested_clk() - get clk rate requested by mmrm
* @pdata: power handle containing the resources
* @clock_name: clock name to get the rate requested by mmrm driver
* to decrease
*
* Return: clock rate requested by mmrm driver, if 0,
* then no active request by mmrm driver
*/
u64 sde_power_mmrm_get_requested_clk(struct sde_power_handle *pdata,
char *clock_name);
/**
* sde_power_clk_get_rate() - get the clock rate
* @pdata: power handle containing the resources
* @clock_name: clock name to get the rate
*
* Return: current clock rate
*/
u64 sde_power_clk_get_rate(struct sde_power_handle *pdata, char *clock_name);
/**
* sde_power_clk_get_max_rate() - get the maximum clock rate
* @pdata: power handle containing the resources
* @clock_name: clock name to get the max rate.
*
* Return: maximum clock rate or 0 if not found.
*/
u64 sde_power_clk_get_max_rate(struct sde_power_handle *pdata,
char *clock_name);
/**
* sde_power_clk_get_clk() - get the clock
* @pdata: power handle containing the resources
* @clock_name: clock name to get the clk pointer.
*
* Return: Pointer to clock
*/
struct clk *sde_power_clk_get_clk(struct sde_power_handle *phandle,
char *clock_name);
/**
* sde_power_data_bus_set_quota() - set data bus quota for power client
* @phandle: power handle containing the resources
* @bus_id: identifier of data bus, see SDE_POWER_HANDLE_DBUS_ID
* @ab_quota: arbitrated bus bandwidth
* @ib_quota: instantaneous bus bandwidth
*
* Return: zero if success, or error code otherwise
*/
int sde_power_data_bus_set_quota(struct sde_power_handle *phandle,
u32 bus_id, u64 ab_quota, u64 ib_quota);
/**
* sde_power_data_bus_bandwidth_ctrl() - control data bus bandwidth enable
* @phandle: power handle containing the resources
* @enable: true to enable bandwidth for data base
*
* Return: none
*/
void sde_power_data_bus_bandwidth_ctrl(struct sde_power_handle *phandle,
int enable);
/**
* sde_power_handle_register_event - register a callback function for an event.
* Clients can register for multiple events with a single register.
* Any block with access to phandle can register for the event
* notification.
* @phandle: power handle containing the resources
* @event_type: event type to register; refer SDE_POWER_HANDLE_EVENT_*
* @cb_fnc: pointer to desired callback function
* @usr: user pointer to pass to callback on event trigger
*
* Return: event pointer if success, or error code otherwise
*/
struct sde_power_event *sde_power_handle_register_event(
struct sde_power_handle *phandle,
u32 event_type, void (*cb_fnc)(u32 event_type, void *usr),
void *usr, char *client_name);
/**
* sde_power_handle_unregister_event - unregister callback for event(s)
* @phandle: power handle containing the resources
* @event: event pointer returned after power handle register
*/
void sde_power_handle_unregister_event(struct sde_power_handle *phandle,
struct sde_power_event *event);
/**
* sde_power_handle_get_dbus_name - get name of given data bus identifier
* @bus_id: data bus identifier
* Return: Pointer to name string if success; NULL otherwise
*/
const char *sde_power_handle_get_dbus_name(u32 bus_id);
#endif /* _SDE_POWER_HANDLE_H_ */
Fai riferimento in un nuovo problema Visualizza Git Blame Copia Permalink