d7794ba3b5
Enable 4address frame format for the packets to the AP. Enable MEC check for the sta dp vdev. A new ini is added to enable WDS feature specifying the desired WDS mode. CRs-Fixed: 2889438 Change-Id: I99ccb91adf283a1ed863902ec4b31f1c3e821d32
911 lines
19 KiB
C
911 lines
19 KiB
C
/*
|
|
* Copyright (c) 2012-2021 The Linux Foundation. All rights reserved.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for
|
|
* any purpose with or without fee is hereby granted, provided that the
|
|
* above copyright notice and this permission notice appear in all
|
|
* copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
|
|
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
|
|
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
|
|
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
|
|
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
|
|
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
|
* PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
/**
|
|
* DOC: This file contains centralized definitions of converged configuration.
|
|
*/
|
|
|
|
#ifndef __CFG_MLME_GENERIC_H
|
|
#define __CFG_MLME_GENERIC_H
|
|
|
|
#define CFG_PMF_SA_QUERY_MAX_RETRIES_TYPE CFG_INI_UINT
|
|
#define CFG_PMF_SA_QUERY_RETRY_INTERVAL_TYPE CFG_INI_UINT
|
|
|
|
/**
|
|
* enum monitor_mode_concurrency - Monitor mode concurrency
|
|
* @MONITOR_MODE_CONC_NO_SUPPORT: No concurrency supported with monitor mode
|
|
* @MONITOR_MODE_CONC_STA_SCAN_MON: STA + monitor mode concurrency is supported
|
|
*/
|
|
enum monitor_mode_concurrency {
|
|
MONITOR_MODE_CONC_NO_SUPPORT,
|
|
MONITOR_MODE_CONC_STA_SCAN_MON,
|
|
MONITOR_MODE_CONC_AFTER_LAST,
|
|
MONITOR_MODE_CONC_MAX = MONITOR_MODE_CONC_AFTER_LAST - 1,
|
|
};
|
|
|
|
/**
|
|
* enum wds_mode_type: wds mode
|
|
* @WLAN_WDS_MODE_DISABLED: WDS is disabled
|
|
* @WLAN_WDS_MODE_REPEATER: WDS repeater mode
|
|
*
|
|
* This is used for 'type' values in wds_mode
|
|
*/
|
|
enum wlan_wds_mode {
|
|
WLAN_WDS_MODE_DISABLED = 0,
|
|
WLAN_WDS_MODE_REPEATER = 1,
|
|
/* keep this last */
|
|
WLAN_WDS_MODE_LAST,
|
|
WLAN_WDS_MODE_MAX = WLAN_WDS_MODE_LAST - 1,
|
|
};
|
|
|
|
/*
|
|
* pmfSaQueryMaxRetries - Control PMF SA query retries for SAP
|
|
* @Min: 0
|
|
* @Max: 20
|
|
* @Default: 5
|
|
*
|
|
* This ini to set the number of PMF SA query retries for SAP
|
|
*
|
|
* Related: None.
|
|
*
|
|
* Supported Feature: PMF(11W)
|
|
*
|
|
*/
|
|
#define CFG_PMF_SA_QUERY_MAX_RETRIES CFG_PMF_SA_QUERY_MAX_RETRIES_TYPE( \
|
|
"pmfSaQueryMaxRetries", \
|
|
0, \
|
|
20, \
|
|
5, \
|
|
CFG_VALUE_OR_DEFAULT, \
|
|
"PMF SA query retries for SAP")
|
|
/*
|
|
* pmfSaQueryRetryInterval - Control PMF SA query retry interval
|
|
* for SAP in ms
|
|
* @Min: 10
|
|
* @Max: 2000
|
|
* @Default: 200
|
|
*
|
|
* This ini to set the PMF SA query retry interval for SAP in ms
|
|
*
|
|
* Related: None.
|
|
*
|
|
* Supported Feature: PMF(11W)
|
|
*
|
|
*/
|
|
#define CFG_PMF_SA_QUERY_RETRY_INTERVAL CFG_PMF_SA_QUERY_RETRY_INTERVAL_TYPE( \
|
|
"pmfSaQueryRetryInterval", \
|
|
10, \
|
|
2000, \
|
|
200, \
|
|
CFG_VALUE_OR_DEFAULT, \
|
|
"PMF SA query retry interval for SAP")
|
|
|
|
/*
|
|
* <ini>
|
|
* enable_rtt_mac_randomization - Enable/Disable rtt mac randomization
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 1
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_ENABLE_RTT_MAC_RANDOMIZATION CFG_INI_BOOL( \
|
|
"enable_rtt_mac_randomization", \
|
|
1, \
|
|
"Enable RTT MAC randomization")
|
|
|
|
#define CFG_RTT3_ENABLE CFG_BOOL( \
|
|
"rtt3_enabled", \
|
|
1, \
|
|
"RTT3 enable/disable info")
|
|
|
|
/*
|
|
* <ini>
|
|
* g11hSupportEnabled - Enable 11h support
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 1
|
|
*
|
|
* This ini is used to set 11h support flag
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: STA
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_11H_SUPPORT_ENABLED CFG_INI_BOOL( \
|
|
"g11hSupportEnabled", \
|
|
1, \
|
|
"11h Enable Flag")
|
|
|
|
/*
|
|
* <ini>
|
|
* g11dSupportEnabled - Enable 11d support
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 1
|
|
*
|
|
* This ini is used to set 11d support flag
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: STA
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_11D_SUPPORT_ENABLED CFG_INI_BOOL( \
|
|
"g11dSupportEnabled", \
|
|
1, \
|
|
"11d Enable Flag")
|
|
|
|
/*
|
|
* <ini>
|
|
* BandCapability - Preferred band (0: 2.4G, 5G, and 6G,
|
|
* 1: 2.4G only,
|
|
* 2: 5G only,
|
|
* 3: Both 2.4G and 5G,
|
|
* 4: 6G only,
|
|
* 5: Both 2.4G and 6G,
|
|
* 6: Both 5G and 6G,
|
|
* 7: 2.4G, 5G, and 6G)
|
|
* @Min: 0
|
|
* @Max: 7
|
|
* @Default: 7
|
|
*
|
|
* This ini is used to set default band capability
|
|
* (0: Both 2.4G and 5G, 1: 2.4G only, 2: 5G only, 3: Both 2.4G and 5G,
|
|
* 4: 6G only, 5: Both 2.4G and 6G, 6: Both 5G and 6G, 7: 2.4G, 5G, and 6G)
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: STA
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_BAND_CAPABILITY CFG_INI_UINT( \
|
|
"BandCapability", \
|
|
0, \
|
|
7, \
|
|
7, \
|
|
CFG_VALUE_OR_DEFAULT, \
|
|
"Band Capability")
|
|
|
|
/*
|
|
* <ini>
|
|
* gPreventLinkDown - Enable to prevent bus link from going down
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 0
|
|
*
|
|
* Enable to prevent bus link from going down. Useful for platforms that do not
|
|
* (yet) support link down suspend cases.
|
|
*
|
|
* Related: N/A
|
|
*
|
|
* Supported Feature: Suspend/Resume
|
|
*
|
|
* Usage: Internal
|
|
*
|
|
* </ini>
|
|
*/
|
|
#if defined(QCA_WIFI_EMULATION) || defined(QCA_WIFI_QCA6290)
|
|
#define CFG_PREVENT_LINK_DOWN CFG_INI_BOOL( \
|
|
"gPreventLinkDown", \
|
|
1, \
|
|
"Prevent Bus Link Down")
|
|
#else
|
|
#define CFG_PREVENT_LINK_DOWN CFG_INI_BOOL( \
|
|
"gPreventLinkDown", \
|
|
0, \
|
|
"Prevent Bus Link Down")
|
|
#endif /* QCA_WIFI_EMULATION */
|
|
|
|
/*
|
|
* <ini>
|
|
* gSelect5GHzMargin - Sets RSSI preference for 5GHz over 2.4GHz AP.
|
|
* @Min: 0
|
|
* @Max: 60
|
|
* @Default: 0
|
|
*
|
|
* Prefer connecting to 5G AP even if its RSSI is lower by gSelect5GHzMargin
|
|
* dBm than 2.4G AP. This feature requires the dependent cfg.ini
|
|
* "gRoamPrefer5GHz" set to 1
|
|
*
|
|
* Related: gRoamPrefer5GHz
|
|
*
|
|
* Supported Feature: Roaming
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_SELECT_5GHZ_MARGIN CFG_INI_UINT( \
|
|
"gSelect5GHzMargin", \
|
|
0, \
|
|
60, \
|
|
0, \
|
|
CFG_VALUE_OR_DEFAULT, \
|
|
"Select 5Ghz Margin")
|
|
|
|
/*
|
|
* <ini>
|
|
* gEnableMemDeepSleep - Sets Memory Deep Sleep on/off.
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 1
|
|
*
|
|
* This option enables/disables memory deep sleep.
|
|
* Related: None
|
|
*
|
|
* Supported Feature: General
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_ENABLE_MEM_DEEP_SLEEP CFG_INI_BOOL( \
|
|
"gEnableMemDeepSleep", \
|
|
1, \
|
|
"Enable Memory Deep Sleep")
|
|
|
|
/*
|
|
* <ini>
|
|
*
|
|
* gEnableCckTxFirOverride - Enable/disable CCK TxFIR Override
|
|
* @Min: 0 (disabled)
|
|
* @Max: 1 (enabled)
|
|
* @Default: 0 (disabled)
|
|
*
|
|
* When operating in an 802.11b mode, this configuration item forces a 2x2 radio
|
|
* configuration into 1x for Tx and 2x for Rx (ie 1x2) for regulatory compliance
|
|
* reasons.
|
|
*
|
|
* Related: enable2x2
|
|
*
|
|
* Supported Feature: 802.11b, 2x2
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_ENABLE_CCK_TX_FIR_OVERRIDE CFG_INI_BOOL( \
|
|
"gEnableCckTxFirOverride", \
|
|
0, \
|
|
"Enable CCK TX FIR Override")
|
|
|
|
/*
|
|
* <ini>
|
|
*
|
|
* gEnableForceTargetAssert - Enable/disable SSR
|
|
* @Min: 0 (disabled)
|
|
* @Max: 1 (enabled)
|
|
* @Default: 0 (disabled)
|
|
*
|
|
* This INI item is used to control subsystem restart(SSR) test framework
|
|
* Set it's value to 1 to enable APPS trigerred SSR testing
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: General
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_ENABLE_CRASH_INJECT CFG_INI_BOOL( \
|
|
"gEnableForceTargetAssert", \
|
|
0, \
|
|
"Enable Crash Inject")
|
|
|
|
/*
|
|
* <ini>
|
|
*
|
|
* gEnableLpassSupport - Enable/disable LPASS Support
|
|
* @Min: 0 (disabled)
|
|
* @Max: 1 (enabled)
|
|
* @Default: 1 (disabled) if WLAN_FEATURE_LPSS is defined, 0 otherwise
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: General
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#ifdef WLAN_FEATURE_LPSS
|
|
#define CFG_ENABLE_LPASS_SUPPORT CFG_INI_BOOL( \
|
|
"gEnableLpassSupport", \
|
|
1, \
|
|
"Enable LPASS Support")
|
|
#else
|
|
#define CFG_ENABLE_LPASS_SUPPORT CFG_BOOL( \
|
|
"gEnableLpassSupport", \
|
|
0, \
|
|
"Enable LPASS Support")
|
|
#endif
|
|
|
|
/*
|
|
* <ini>
|
|
*
|
|
* gEnableSelfRecovery - Enable/disable Self Recovery
|
|
* @Min: 0 (disabled)
|
|
* @Max: 1 (enabled)
|
|
* @Default: 0 (disabled)
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: General
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_ENABLE_SELF_RECOVERY CFG_INI_BOOL( \
|
|
"gEnableSelfRecovery", \
|
|
0, \
|
|
"Enable Self Recovery")
|
|
|
|
/*
|
|
* <ini>
|
|
*
|
|
* gSapDot11mc - Enable/disable SAP 802.11mc support
|
|
* @Min: 0 (disabled)
|
|
* @Max: 1 (enabled)
|
|
* @Default: 0 (disabled)
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: General
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_SAP_DOT11MC CFG_INI_BOOL( \
|
|
"gSapDot11mc", \
|
|
0, \
|
|
"SAP 802.11mc support")
|
|
|
|
/*
|
|
* <ini>
|
|
*
|
|
* gEnableFatalEvent - Enable/Disable BUG report in case of fatal event
|
|
* @Min: 0 (disabled)
|
|
* @Max: 1 (enabled)
|
|
* @Default: 1 (enabled)
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: General
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_ENABLE_FATAL_EVENT_TRIGGER CFG_INI_BOOL( \
|
|
"gEnableFatalEvent", \
|
|
1, \
|
|
"Enable Fatal Event Trigger")
|
|
|
|
/*
|
|
* <ini>
|
|
* gSub20ChannelWidth - Control sub 20 channel width (5/10 Mhz)
|
|
* @Min: 0
|
|
* @Max: 2
|
|
* @Default: 0
|
|
*
|
|
* This ini is used to set the sub 20 channel width.
|
|
* gSub20ChannelWidth=0: indicates do not use Sub 20 MHz bandwidth
|
|
* gSub20ChannelWidth=1: Bring up SAP/STA in 5 MHz bandwidth
|
|
* gSub20ChannelWidth=2: Bring up SAP/STA in 10 MHz bandwidth
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: 5/10 Mhz channel width support
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_SUB_20_CHANNEL_WIDTH CFG_INI_UINT( \
|
|
"gSub20ChannelWidth", \
|
|
0, \
|
|
2, \
|
|
0, \
|
|
CFG_VALUE_OR_DEFAULT, \
|
|
"Sub 20 Channel Width")
|
|
|
|
/*
|
|
* <ini>
|
|
* goptimize_chan_avoid_event - Optimize channel avoidance indication
|
|
* coming from firmware
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 0
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: General
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_OPTIMIZE_CA_EVENT CFG_INI_BOOL( \
|
|
"goptimize_chan_avoid_event", \
|
|
0, \
|
|
"Optimize FW CA Event")
|
|
|
|
/*
|
|
* <ini>
|
|
* fw_timeout_crash - Enable/Disable BUG ON
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 1
|
|
*
|
|
* This ini is used to Trigger host crash when firmware fails to send the
|
|
* response to host
|
|
* fw_timeout_crash = 0 Disabled
|
|
* fw_timeout_crash = 1 Trigger host crash
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: SSR
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_CRASH_FW_TIMEOUT CFG_INI_BOOL( \
|
|
"fw_timeout_crash", \
|
|
1, \
|
|
"Enable FW Timeout Crash")
|
|
|
|
/*
|
|
* <ini>
|
|
* gDroppedPktDisconnectTh - Sets dropped packet threshold in firmware
|
|
* @Min: 0
|
|
* @Max: 65535
|
|
* @Default: 512
|
|
*
|
|
* This INI is the packet drop threshold will trigger disconnect from remote
|
|
* peer.
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: connection
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_DROPPED_PKT_DISCONNECT_THRESHOLD CFG_INI_UINT( \
|
|
"gDroppedPktDisconnectTh", \
|
|
0, \
|
|
65535, \
|
|
512, \
|
|
CFG_VALUE_OR_DEFAULT, \
|
|
"Dropped Pkt Disconnect threshold")
|
|
|
|
/*
|
|
* <ini>
|
|
* gItoRepeatCount - sets ito repeated count
|
|
* @Min: 0
|
|
* @Max: 5
|
|
* @Default: 0
|
|
*
|
|
* This ini sets the ito count in FW
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_ITO_REPEAT_COUNT CFG_INI_UINT( \
|
|
"gItoRepeatCount", \
|
|
0, \
|
|
5, \
|
|
0, \
|
|
CFG_VALUE_OR_DEFAULT, \
|
|
"ITO Repeat Count")
|
|
|
|
/*
|
|
* <ini>
|
|
* gEnableDeauthToDisassocMap - Enables deauth to disassoc map
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 0
|
|
*
|
|
* This ini is used to set default disassoc map
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: STA
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_ENABLE_DEAUTH_TO_DISASSOC_MAP CFG_INI_BOOL( \
|
|
"gEnableDeauthToDisassocMap", \
|
|
0, \
|
|
"Enables deauth to disassoc map")
|
|
|
|
/*
|
|
* <ini>
|
|
* gEnableDebugLog - Enable/Disable the Connection related logs
|
|
* @Min: 0
|
|
* @Max: 0xFF
|
|
* @Default: 0x0F
|
|
*
|
|
* This ini is used to enable/disable the connection related logs
|
|
* 0x1 - Enable mgmt pkt logs (excpet probe req/rsp, beacons).
|
|
* 0x2 - Enable EAPOL pkt logs.
|
|
* 0x4 - Enable DHCP pkt logs.
|
|
* 0x8 - Enable mgmt action frames logs.
|
|
* 0x0 - Disable all the above connection related logs.
|
|
* The default value of 0x0F will enable all the above logs
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: STA
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_ENABLE_DEBUG_PACKET_LOG CFG_INI_UINT( \
|
|
"gEnableDebugLog", \
|
|
0, 0xFF, 0x0F, \
|
|
CFG_VALUE_OR_DEFAULT, \
|
|
"Enable debug log")
|
|
|
|
/*
|
|
* <ini>
|
|
* enable_beacon_reception_stats - Enable disable beacon reception stats
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 0
|
|
*
|
|
* This ini is used to enable/disable the beacon reception stats collected per
|
|
* vdev and then sent to the driver to be displayed in sysfs
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: Stats
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_ENABLE_BEACON_RECEPTION_STATS CFG_INI_BOOL( \
|
|
"enable_beacon_reception_stats", \
|
|
0, \
|
|
"Enable disable beacon reception stats")
|
|
|
|
/*
|
|
* <ini>
|
|
* gRemoveTimeStampSyncCmd - Enable/Disable to remove time stamp sync cmd
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 0
|
|
*
|
|
* This ini is used to enable/disable the removal of time stamp sync cmd.
|
|
* If we disable this periodic time sync update to firmware then roaming
|
|
* timestamp updates to kmsg will have invalid timestamp as firmware will
|
|
* use this timestamp to capture when roaming has happened with respect
|
|
* to host timestamp.
|
|
*
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_REMOVE_TIME_STAMP_SYNC_CMD CFG_INI_BOOL( \
|
|
"gRemoveTimeStampSyncCmd", \
|
|
0, \
|
|
"Enable to remove time stamp sync cmd")
|
|
|
|
/*
|
|
* <ini>
|
|
* disable_4way_hs_offload - Enable/Disable 4 way handshake offload to firmware
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 0
|
|
*
|
|
* 0 4-way HS to be handled in firmware
|
|
* 1 4-way HS to be handled in supplicant
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: STA Roaming
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_DISABLE_4WAY_HS_OFFLOAD CFG_INI_BOOL("disable_4way_hs_offload", \
|
|
0, \
|
|
"Enable/disable 4 way handshake offload to firmware")
|
|
|
|
/*
|
|
* <ini>
|
|
* mgmt_retry_max - Maximum Retries for mgmt frames
|
|
* @Min: 0
|
|
* @Max: 31
|
|
* @Default: 15
|
|
*
|
|
* This ini is used to set maximum retries for mgmt frames
|
|
*
|
|
* Supported Feature: STA/SAP
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_MGMT_RETRY_MAX CFG_INI_UINT( \
|
|
"mgmt_retry_max", \
|
|
0, \
|
|
31, \
|
|
15, \
|
|
CFG_VALUE_OR_DEFAULT, \
|
|
"Max retries for mgmt frames")
|
|
|
|
/*
|
|
* <ini>
|
|
* bmiss_skip_full_scan - To decide whether firmware does channel map based
|
|
* partial scan or partial scan followed by full scan in case no candidate is
|
|
* found in partial scan.
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 0
|
|
*
|
|
* 0 : Based on the channel map , firmware does scan to find new AP. if AP is
|
|
* not found then it does a full scan on all valid channels.
|
|
* 1 : Firmware does channel map based partial scan only.
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: STA Roaming
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_BMISS_SKIP_FULL_SCAN CFG_INI_BOOL("bmiss_skip_full_scan", \
|
|
0, \
|
|
"To decide partial/partial scan followed by full scan")
|
|
|
|
/*
|
|
* <ini>
|
|
* gEnableRingBuffer - Enable Ring Buffer for Bug Report
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 1
|
|
*
|
|
* This ini is used to enable Ring Buffer
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: STA/SAP
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_ENABLE_RING_BUFFER CFG_INI_BOOL( \
|
|
"gEnableRingBuffer", \
|
|
1, \
|
|
"To Enable Ring Buffer")
|
|
|
|
/*
|
|
* <ini>
|
|
* dfs_chan_ageout_time - Set DFS Channel ageout time(in seconds)
|
|
* @Min: 0
|
|
* @Max: 8
|
|
* Default: 0
|
|
*
|
|
* Ageout time is the time upto which DFS channel information such as beacon
|
|
* found is remembered. So that Firmware performs Active scan instead of the
|
|
* Passive to reduce the Dwell time.
|
|
* This ini Parameter used to set ageout timer value from host to FW.
|
|
* If not set, Firmware will disable ageout time.
|
|
*
|
|
* Supported Feature: STA scan in DFS channels
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_DFS_CHAN_AGEOUT_TIME CFG_INI_UINT("dfs_chan_ageout_time", \
|
|
0, 8, 0, CFG_VALUE_OR_DEFAULT, \
|
|
"Set DFS Channel ageout time from host to firmware")
|
|
|
|
/*
|
|
* <ini>
|
|
* sae_connect_retries - Bit mask to retry Auth and full connection on assoc
|
|
* timeout to same AP and auth retries during roaming
|
|
* @Min: 0x0
|
|
* @Max: 0x53
|
|
* @Default: 0x52
|
|
*
|
|
* This ini is used to set max auth retry in auth phase of roaming and initial
|
|
* connection and max connection retry in case of assoc timeout. MAX Auth
|
|
* retries are capped to 3, connection retries are capped to 2 and roam Auth
|
|
* retry is capped to 1.
|
|
* Default is 0x52 i.e. 1 roam auth retry, 2 auth retry and 2 full connection
|
|
* retry.
|
|
*
|
|
* Bits Retry Type
|
|
* BIT[0:2] AUTH retries
|
|
* BIT[3:5] Connection reties
|
|
* BIT[6:8] ROAM AUTH retries
|
|
*
|
|
* Some Possible values are as below
|
|
* 0 - NO auth/roam Auth retry and NO full connection retry after
|
|
* assoc timeout
|
|
* 0x49 - 1 auth/roam auth retry and 1 full connection retry
|
|
* 0x52 - 1 roam auth retry, 2 auth retry and 2 full connection retry
|
|
* 0x1 /0x2 - 0 roam auth retry, 1 or 2 auth retry respectively and NO full
|
|
* connection retry
|
|
* 0x8 /0x10 - 0 roam auth retry,NO auth retry and 1 or 2 full connection retry
|
|
* respectively.
|
|
* 0x4A - 1 roam auth retry,2 auth retry and 1 full connection retry
|
|
* 0x51 - 1 auth/roam auth retry and 2 full connection retry
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: STA SAE
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_SAE_CONNECION_RETRIES CFG_INI_UINT("sae_connect_retries", \
|
|
0, 0x53, 0x52, CFG_VALUE_OR_DEFAULT, \
|
|
"Bit mask to retry Auth and full connection on assoc timeout to same AP for SAE connection")
|
|
|
|
/*
|
|
* <ini>
|
|
*
|
|
* wls_6ghz_capable - WiFi Location Service(WLS) is 6Ghz capable
|
|
* @Min: 0 (WLS 6Ghz non-capable)
|
|
* @Max: 1 (WLS 6Ghz capable)
|
|
* @Default: 0 (WLS 6Ghz non-capable)
|
|
*
|
|
* Related: None
|
|
*
|
|
* Supported Feature: General
|
|
*
|
|
* Usage: Internal
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_WLS_6GHZ_CAPABLE CFG_INI_BOOL( \
|
|
"wls_6ghz_capable", \
|
|
0, \
|
|
"WiFi Location Service(WLS) is 6Ghz capable or not")
|
|
|
|
/*
|
|
* <ini>
|
|
*
|
|
* monitor_mode_conc - Monitor mode concurrency supported
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 0
|
|
*
|
|
* Related: None
|
|
*
|
|
* Monitor mode concurrency supported
|
|
* 0 - No concurrency supported
|
|
* 1 - Allow STA scan + Monitor mode concurrency
|
|
*
|
|
* Supported Feature: General
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_MONITOR_MODE_CONCURRENCY CFG_INI_UINT( \
|
|
"monitor_mode_concurrency", \
|
|
MONITOR_MODE_CONC_NO_SUPPORT, \
|
|
MONITOR_MODE_CONC_MAX, \
|
|
MONITOR_MODE_CONC_NO_SUPPORT, \
|
|
CFG_VALUE_OR_DEFAULT, \
|
|
"Monitor mode concurrency supported")
|
|
|
|
#ifdef FEATURE_WDS
|
|
/*
|
|
* <ini>
|
|
*
|
|
* wds_mode - wds mode supported
|
|
* @Min: 0
|
|
* @Max: 1
|
|
* @Default: 0
|
|
*
|
|
* Related: None
|
|
*
|
|
* wds mode supported
|
|
* 0 - wds mode disabled
|
|
* 1 - wds repeater mode
|
|
*
|
|
* Supported Feature: General
|
|
*
|
|
* Usage: External
|
|
*
|
|
* </ini>
|
|
*/
|
|
#define CFG_WDS_MODE CFG_INI_UINT( \
|
|
"wds_mode", \
|
|
WLAN_WDS_MODE_DISABLED, \
|
|
WLAN_WDS_MODE_MAX, \
|
|
WLAN_WDS_MODE_DISABLED, \
|
|
CFG_VALUE_OR_DEFAULT, \
|
|
"wds mode supported")
|
|
|
|
#define CFG_WDS_MODE_ALL CFG(CFG_WDS_MODE)
|
|
#else
|
|
#define CFG_WDS_MODE_ALL
|
|
#endif
|
|
|
|
#define CFG_GENERIC_ALL \
|
|
CFG(CFG_ENABLE_DEBUG_PACKET_LOG) \
|
|
CFG(CFG_PMF_SA_QUERY_MAX_RETRIES) \
|
|
CFG(CFG_PMF_SA_QUERY_RETRY_INTERVAL) \
|
|
CFG(CFG_ENABLE_RTT_MAC_RANDOMIZATION) \
|
|
CFG(CFG_RTT3_ENABLE) \
|
|
CFG(CFG_11H_SUPPORT_ENABLED) \
|
|
CFG(CFG_11D_SUPPORT_ENABLED) \
|
|
CFG(CFG_BAND_CAPABILITY) \
|
|
CFG(CFG_PREVENT_LINK_DOWN) \
|
|
CFG(CFG_SELECT_5GHZ_MARGIN) \
|
|
CFG(CFG_ENABLE_MEM_DEEP_SLEEP) \
|
|
CFG(CFG_ENABLE_CCK_TX_FIR_OVERRIDE) \
|
|
CFG(CFG_ENABLE_CRASH_INJECT) \
|
|
CFG(CFG_ENABLE_LPASS_SUPPORT) \
|
|
CFG(CFG_ENABLE_SELF_RECOVERY) \
|
|
CFG(CFG_ENABLE_DEAUTH_TO_DISASSOC_MAP) \
|
|
CFG(CFG_DISABLE_4WAY_HS_OFFLOAD) \
|
|
CFG(CFG_SAP_DOT11MC) \
|
|
CFG(CFG_ENABLE_FATAL_EVENT_TRIGGER) \
|
|
CFG(CFG_SUB_20_CHANNEL_WIDTH) \
|
|
CFG(CFG_OPTIMIZE_CA_EVENT) \
|
|
CFG(CFG_CRASH_FW_TIMEOUT) \
|
|
CFG(CFG_DROPPED_PKT_DISCONNECT_THRESHOLD) \
|
|
CFG(CFG_ITO_REPEAT_COUNT) \
|
|
CFG(CFG_ENABLE_BEACON_RECEPTION_STATS) \
|
|
CFG(CFG_REMOVE_TIME_STAMP_SYNC_CMD) \
|
|
CFG(CFG_MGMT_RETRY_MAX) \
|
|
CFG(CFG_BMISS_SKIP_FULL_SCAN) \
|
|
CFG(CFG_ENABLE_RING_BUFFER) \
|
|
CFG(CFG_DFS_CHAN_AGEOUT_TIME) \
|
|
CFG(CFG_SAE_CONNECION_RETRIES) \
|
|
CFG(CFG_WLS_6GHZ_CAPABLE) \
|
|
CFG(CFG_MONITOR_MODE_CONCURRENCY) \
|
|
CFG_WDS_MODE_ALL
|
|
#endif /* __CFG_MLME_GENERIC_H */
|