android_kernel_samsung_sm8650-modules/qcom/opensource/display-drivers/msm/dsi/dsi_panel.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
 * Copyright (c) 2016-2021, The Linux Foundation. All rights reserved.
 */

#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/pwm.h>
#include <video/mipi_display.h>

#include "dsi_panel.h"
#include "dsi_ctrl_hw.h"
#include "dsi_parser.h"
#include "sde_dbg.h"
#include "sde_dsc_helper.h"
#include "sde_vdc_helper.h"

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
#include "ss_dsi_panel_common.h"
#include "ss_panel_power.h"
#include "sde_trace.h"
#endif

/**
 * topology is currently defined by a set of following 3 values:
 * 1. num of layer mixers
 * 2. num of compression encoders
 * 3. num of interfaces
 */
#define TOPOLOGY_SET_LEN 3
#define MAX_TOPOLOGY 5

#define DSI_PANEL_DEFAULT_LABEL  "Default dsi panel"

#define DEFAULT_PANEL_JITTER_NUMERATOR		2
#define DEFAULT_PANEL_JITTER_DENOMINATOR	1
#define DEFAULT_PANEL_JITTER_ARRAY_SIZE		2
#define MAX_PANEL_JITTER		10
#define DEFAULT_PANEL_PREFILL_LINES	25
#define HIGH_REFRESH_RATE_THRESHOLD_TIME_US	500
#define MIN_PREFILL_LINES      40
#define RSCC_MODE_THRESHOLD_TIME_US 40
#define DCS_COMMAND_THRESHOLD_TIME_US 40

static void dsi_dce_prepare_pps_header(char *buf, u32 pps_delay_ms)
{
	char *bp;

	bp = buf;
	/* First 7 bytes are cmd header */
	*bp++ = 0x0A;
	*bp++ = 1;
	*bp++ = 0;
	*bp++ = 0;
	*bp++ = pps_delay_ms;
	*bp++ = 0;
	*bp++ = 128;
}

static int dsi_dsc_create_pps_buf_cmd(struct msm_display_dsc_info *dsc,
	char *buf, int pps_id, u32 size)
{
	dsi_dce_prepare_pps_header(buf, dsc->pps_delay_ms);
	buf += DSI_CMD_PPS_HDR_SIZE;
	return sde_dsc_create_pps_buf_cmd(dsc, buf, pps_id,
			size);
}

static int dsi_vdc_create_pps_buf_cmd(struct msm_display_vdc_info *vdc,
	char *buf, int pps_id, u32 size)
{
	dsi_dce_prepare_pps_header(buf, vdc->pps_delay_ms);
	buf += DSI_CMD_PPS_HDR_SIZE;
	return sde_vdc_create_pps_buf_cmd(vdc, buf, pps_id,
			size);
}

static int dsi_panel_vreg_get(struct dsi_panel *panel)
{
	int rc = 0;
	int i;
	struct regulator *vreg = NULL;

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	return ss_panel_parse_powers(ss_get_vdd_from_panel_name(panel->name),
			panel->panel_of_node, panel->parent);
#endif

	for (i = 0; i < panel->power_info.count; i++) {
		vreg = devm_regulator_get(panel->parent,
					  panel->power_info.vregs[i].vreg_name);
		rc = PTR_ERR_OR_ZERO(vreg);
		if (rc) {
			DSI_ERR("failed to get %s regulator\n",
			       panel->power_info.vregs[i].vreg_name);
			goto error_put;
		}
		panel->power_info.vregs[i].vreg = vreg;
	}

	return rc;
error_put:
	for (i = i - 1; i >= 0; i--) {
		devm_regulator_put(panel->power_info.vregs[i].vreg);
		panel->power_info.vregs[i].vreg = NULL;
	}
	return rc;
}

static int dsi_panel_vreg_put(struct dsi_panel *panel)
{
	int rc = 0;
	int i;

	for (i = panel->power_info.count - 1; i >= 0; i--)
		devm_regulator_put(panel->power_info.vregs[i].vreg);

	return rc;
}

static int dsi_panel_gpio_request(struct dsi_panel *panel)
{
	int rc = 0;
	struct dsi_panel_reset_config *r_config = &panel->reset_config;

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	return 0;
#endif

	if (gpio_is_valid(r_config->reset_gpio)) {
		rc = gpio_request(r_config->reset_gpio, "reset_gpio");
		if (rc) {
			DSI_ERR("request for reset_gpio failed, rc=%d\n", rc);
			goto error;
		}
	}

	if (gpio_is_valid(r_config->disp_en_gpio)) {
		rc = gpio_request(r_config->disp_en_gpio, "disp_en_gpio");
		if (rc) {
			DSI_ERR("request for disp_en_gpio failed, rc=%d\n", rc);
			goto error_release_reset;
		}
	}

	if (gpio_is_valid(panel->bl_config.en_gpio)) {
		rc = gpio_request(panel->bl_config.en_gpio, "bklt_en_gpio");
		if (rc) {
			DSI_ERR("request for bklt_en_gpio failed, rc=%d\n", rc);
			goto error_release_disp_en;
		}
	}

	if (gpio_is_valid(r_config->lcd_mode_sel_gpio)) {
		rc = gpio_request(r_config->lcd_mode_sel_gpio, "mode_gpio");
		if (rc) {
			DSI_ERR("request for mode_gpio failed, rc=%d\n", rc);
			goto error_release_mode_sel;
		}
	}

	if (gpio_is_valid(panel->panel_test_gpio)) {
		rc = gpio_request(panel->panel_test_gpio, "panel_test_gpio");
		if (rc) {
			DSI_WARN("request for panel_test_gpio failed, rc=%d\n",
				 rc);
			panel->panel_test_gpio = -1;
			rc = 0;
		}
	}

	goto error;
error_release_mode_sel:
	if (gpio_is_valid(panel->bl_config.en_gpio))
		gpio_free(panel->bl_config.en_gpio);
error_release_disp_en:
	if (gpio_is_valid(r_config->disp_en_gpio))
		gpio_free(r_config->disp_en_gpio);
error_release_reset:
	if (gpio_is_valid(r_config->reset_gpio))
		gpio_free(r_config->reset_gpio);
error:
	return rc;
}

static int dsi_panel_gpio_release(struct dsi_panel *panel)
{
	int rc = 0;
	struct dsi_panel_reset_config *r_config = &panel->reset_config;

	if (gpio_is_valid(r_config->reset_gpio))
		gpio_free(r_config->reset_gpio);

	if (gpio_is_valid(r_config->disp_en_gpio))
		gpio_free(r_config->disp_en_gpio);

	if (gpio_is_valid(panel->bl_config.en_gpio))
		gpio_free(panel->bl_config.en_gpio);

	if (gpio_is_valid(panel->reset_config.lcd_mode_sel_gpio))
		gpio_free(panel->reset_config.lcd_mode_sel_gpio);

	if (gpio_is_valid(panel->panel_test_gpio))
		gpio_free(panel->panel_test_gpio);

	return rc;
}

static int dsi_panel_trigger_esd_attack_sub(int reset_gpio)
{
	if (!gpio_is_valid(reset_gpio)) {
		DSI_INFO("failed to pull down the reset gpio\n");
		return -EINVAL;
	}

	gpio_set_value(reset_gpio, 0);

	SDE_EVT32(SDE_EVTLOG_FUNC_CASE1);
	DSI_INFO("GPIO pulled low to simulate ESD\n");

	return 0;
}

static int dsi_panel_vm_trigger_esd_attack(struct dsi_panel *panel)
{
	struct dsi_parser_utils *utils = &panel->utils;
	int reset_gpio;
	int rc = 0;

	reset_gpio = utils->get_named_gpio(utils->data,
			"qcom,platform-reset-gpio", 0);
	if (!gpio_is_valid(reset_gpio)) {
		DSI_ERR("[%s] reset gpio not provided\n", panel->name);
		return -EINVAL;
	}

	rc = gpio_request(reset_gpio, "reset_gpio");
	if (rc) {
		DSI_ERR("request for reset_gpio failed, rc=%d\n", rc);
		return rc;
	}

	rc = dsi_panel_trigger_esd_attack_sub(reset_gpio);

	gpio_free(reset_gpio);

	return rc;
}

static int dsi_panel_trigger_esd_attack(struct dsi_panel *panel)
{
	struct dsi_panel_reset_config *r_config;

	if (!panel) {
		DSI_ERR("Invalid panel param\n");
		return -EINVAL;
	}

	r_config = &panel->reset_config;
	if (!r_config) {
		DSI_ERR("Invalid panel reset configuration\n");
		return -EINVAL;
	}

	return dsi_panel_trigger_esd_attack_sub(r_config->reset_gpio);
}

static int dsi_panel_reset(struct dsi_panel *panel)
{
	int rc = 0;
	struct dsi_panel_reset_config *r_config = &panel->reset_config;
	int i;

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	return 0;
#endif

	if (!gpio_is_valid(r_config->reset_gpio))
		goto skip_reset_gpio;

	if (gpio_is_valid(panel->reset_config.disp_en_gpio)) {
		rc = gpio_direction_output(panel->reset_config.disp_en_gpio, 1);
		if (rc) {
			DSI_ERR("unable to set dir for disp gpio rc=%d\n", rc);
			goto exit;
		}
	}

	if (r_config->count) {
		rc = gpio_direction_output(r_config->reset_gpio,
			r_config->sequence[0].level);
		if (rc) {
			DSI_ERR("unable to set dir for rst gpio rc=%d\n", rc);
			goto exit;
		}
	}

	for (i = 0; i < r_config->count; i++) {
		gpio_set_value(r_config->reset_gpio,
			       r_config->sequence[i].level);


		if (r_config->sequence[i].sleep_ms)
			usleep_range(r_config->sequence[i].sleep_ms * 1000,
				(r_config->sequence[i].sleep_ms * 1000) + 100);
	}

skip_reset_gpio:
	if (gpio_is_valid(panel->bl_config.en_gpio)) {
		rc = gpio_direction_output(panel->bl_config.en_gpio, 1);
		if (rc)
			DSI_ERR("unable to set dir for bklt gpio rc=%d\n", rc);
	}

	if (gpio_is_valid(panel->reset_config.lcd_mode_sel_gpio)) {
		bool out = true;

		if ((panel->reset_config.mode_sel_state == MODE_SEL_DUAL_PORT)
				|| (panel->reset_config.mode_sel_state
					== MODE_GPIO_LOW))
			out = false;
		else if ((panel->reset_config.mode_sel_state
				== MODE_SEL_SINGLE_PORT) ||
				(panel->reset_config.mode_sel_state
				 == MODE_GPIO_HIGH))
			out = true;

		rc = gpio_direction_output(
			panel->reset_config.lcd_mode_sel_gpio, out);
		if (rc)
			DSI_ERR("unable to set dir for mode gpio rc=%d\n", rc);
	}

	if (gpio_is_valid(panel->panel_test_gpio)) {
		rc = gpio_direction_input(panel->panel_test_gpio);
		if (rc)
			DSI_WARN("unable to set dir for panel test gpio rc=%d\n",
					rc);
	}

exit:
	return rc;
}

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
int dsi_panel_set_pinctrl_state(struct dsi_panel *panel, bool enable)
#else
static int dsi_panel_set_pinctrl_state(struct dsi_panel *panel, bool enable)
#endif
{
	int rc = 0;
	struct pinctrl_state *state;

	if (panel->host_config.ext_bridge_mode)
		return 0;

	if (!panel->pinctrl.pinctrl)
		return 0;

	if (enable)
		state = panel->pinctrl.active;
	else
		state = panel->pinctrl.suspend;

	rc = pinctrl_select_state(panel->pinctrl.pinctrl, state);
	if (rc)
		DSI_ERR("[%s] failed to set pin state, rc=%d\n",
				panel->name, rc);

	return rc;
}


static int dsi_panel_power_on(struct dsi_panel *panel)
{
	int rc = 0;

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	return 0;
#endif

	rc = dsi_pwr_enable_regulator(&panel->power_info, true);
	if (rc) {
		DSI_ERR("[%s] failed to enable vregs, rc=%d\n",
				panel->name, rc);
		goto exit;
	}

	rc = dsi_panel_set_pinctrl_state(panel, true);
	if (rc) {
		DSI_ERR("[%s] failed to set pinctrl, rc=%d\n", panel->name, rc);
		goto error_disable_vregs;
	}

	rc = dsi_panel_reset(panel);
	if (rc) {
		DSI_ERR("[%s] failed to reset panel, rc=%d\n", panel->name, rc);
		goto error_disable_gpio;
	}

	goto exit;

error_disable_gpio:
	if (gpio_is_valid(panel->reset_config.disp_en_gpio))
		gpio_set_value(panel->reset_config.disp_en_gpio, 0);

	if (gpio_is_valid(panel->bl_config.en_gpio))
		gpio_set_value(panel->bl_config.en_gpio, 0);

	(void)dsi_panel_set_pinctrl_state(panel, false);

error_disable_vregs:
	(void)dsi_pwr_enable_regulator(&panel->power_info, false);

exit:
	return rc;
}

static int dsi_panel_power_off(struct dsi_panel *panel)
{
	int rc = 0;

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	return ss_panel_power_off_post_lp11(panel->panel_private);
#endif

	if (gpio_is_valid(panel->reset_config.disp_en_gpio))
		gpio_set_value(panel->reset_config.disp_en_gpio, 0);

	if (gpio_is_valid(panel->reset_config.reset_gpio) &&
					!panel->reset_gpio_always_on)
		gpio_set_value(panel->reset_config.reset_gpio, 0);

	if (gpio_is_valid(panel->reset_config.lcd_mode_sel_gpio))
		gpio_set_value(panel->reset_config.lcd_mode_sel_gpio, 0);

	if (gpio_is_valid(panel->panel_test_gpio)) {
		rc = gpio_direction_input(panel->panel_test_gpio);
		if (rc)
			DSI_WARN("set dir for panel test gpio failed rc=%d\n",
				 rc);
	}

	rc = dsi_panel_set_pinctrl_state(panel, false);
	if (rc) {
		DSI_ERR("[%s] failed set pinctrl state, rc=%d\n", panel->name,
		       rc);
	}

	rc = dsi_pwr_enable_regulator(&panel->power_info, false);
	if (rc)
		DSI_ERR("[%s] failed to enable vregs, rc=%d\n",
				panel->name, rc);

	return rc;
}

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
int dsi_panel_tx_cmd_set(struct dsi_panel *panel,
				int type)
#else
static int dsi_panel_tx_cmd_set(struct dsi_panel *panel,
				enum dsi_cmd_set_type type)
#endif
{
	int rc = 0, i = 0;
	ssize_t len;
	struct dsi_cmd_desc *cmds;
	u32 count;
	enum dsi_cmd_set_state state;
#if !IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	struct dsi_display_mode *mode;
#endif

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
		struct samsung_display_driver_data *vdd = panel->panel_private;
		struct dsi_panel_cmd_set *set;
		struct dsi_display *display = container_of(panel->host, struct dsi_display, host);
		size_t tot_tx_len = 0;
		int retry = 5;

		if (ss_check_panel_connection(vdd)) {
			LCD_INFO(vdd, "skip to send command(type: %d)\n", type);
			dump_stack();
			return 0;
		}

		/* ss_get_cmds() gets proper QCT cmds or SS cmds for panel revision. */
		set = ss_get_cmds(vdd, type);
		if (!set) {
			LCD_INFO(vdd, "fail to get commands(%d)\n", type);
			return 0;
		}

		cmds = set->cmds;
		count = set->count;
		state = set->state;

		SDE_EVT32(type, state, count);
		mutex_lock(&vdd->cmd_lock);
#else
	if (!panel || !panel->cur_mode)
		return -EINVAL;

	mode = panel->cur_mode;

	cmds = mode->priv_info->cmd_sets[type].cmds;
	count = mode->priv_info->cmd_sets[type].count;
	state = mode->priv_info->cmd_sets[type].state;
	SDE_EVT32(type, state, count);
#endif

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	if (cmds && (display->ctrl[0].ctrl->secure_mode)) {
		for (i = 0 ; i < count ; i++) {
			if (cmds->msg.tx_len > DSI_CTRL_MAX_CMD_FIFO_STORE_SIZE) {
				LCD_ERR(vdd, "Over DSI_CTRL_MAX_CMD_FIFO_STORE_SIZE at secure_mode type = %d\n", type);
				if (type != TX_MDNIE_TUNE)
					WARN(1, "unexpected cmd type = %d\n", type);
				goto error;
			}
			cmds++;
		}
		for (i = 0 ; i < count ; i++)
			cmds--;
	}
#endif

	if (count == 0) {
		DSI_DEBUG("[%s] No commands to be sent for state(%d)\n",
			 panel->name, type);
		goto error;
	}

	for (i = 0; i < count; i++) {
		cmds->ctrl_flags = 0;

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
		if (is_ss_cmd_op_skip(vdd, cmds->ss_cmd)) {
			DSI_DEBUG("skip tx cmd\n");
			cmds++;
			continue;
		}

		/* set last_command if total size is over than MAX DSI FIFO SIZE */
		cmds->msg.flags |= MIPI_DSI_MSG_BATCH_COMMAND;

		if (tot_tx_len == 0)
			tot_tx_len = ALIGN((cmds->msg.tx_len + 4), 4);

		if (i < count - 1)
			tot_tx_len += ALIGN(((cmds + 1)->msg.tx_len + 4), 4);

		/* set last_command if next cmd is read cmd */
		if (i < count - 1 && (cmds + 1)->msg.rx_len && (cmds + 1)->msg.rx_buf)
			cmds->msg.flags &= ~(MIPI_DSI_MSG_BATCH_COMMAND);

		if ((tot_tx_len > DSI_CTRL_MAX_CMD_FET_MEMORY_SIZE) || (i == count-1) || (cmds->post_wait_ms) ||
				(cmds->last_command == true)) {
			pr_debug("tot %zd is over than max || last cmd set, set last_command", tot_tx_len);
			cmds->msg.flags &= ~(MIPI_DSI_MSG_BATCH_COMMAND);
			tot_tx_len = 0;
		}

		if (vdd->not_support_single_tx) /* Some DDI does not support single tx */
			cmds->msg.flags &= ~(MIPI_DSI_MSG_BATCH_COMMAND);

		if (vdd->dtsi_data.samsung_cmds_unicast)
			cmds->msg.flags |= MIPI_DSI_MSG_UNICAST_COMMAND;

		/*
			Single dsi display uses unicast by default.
			Force Broadcast(dual dsi) dispaly use main only read operation,
			even if samsung_cmds_unicast is not set.

		*/
		if (cmds->msg.rx_len && cmds->msg.rx_buf) {
			cmds->msg.flags |= MIPI_DSI_MSG_UNICAST_COMMAND; /* Vendor QC uses this flag now */
			cmds->ctrl_flags |= DSI_CTRL_CMD_READ;
		}
#endif

		if (state == DSI_CMD_SET_STATE_LP)
			cmds->msg.flags |= MIPI_DSI_MSG_USE_LPM;

		if (type == DSI_CMD_SET_VID_SWITCH_OUT)
			cmds->msg.flags |= MIPI_DSI_MSG_ASYNC_OVERRIDE;

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
		while (retry-- >= 0) {
#endif

		len = dsi_host_transfer_sub(panel->host, cmds);
		if (len < 0) {
			rc = len;
			DSI_ERR("failed to set cmds(%d), rc=%d\n", type, rc);
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
			DSI_ERR("transfer retry!(%d)\n", retry);
			continue;
#endif
			goto error;
		}
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
			else {
				retry = 5;
				break;
			}
		} /* while end */

		if (retry < 0) {
			if (!vdd->panel_dead)
				SDE_DBG_DUMP(SDE_DBG_BUILT_IN_ALL, "panic");
			else
				DSI_ERR("Skip dump register & panic in ESD\n");
		}

		/* reset lp_rx_fail_cnt if mipi read is successful */
		vdd->lp_rx_fail_cnt = 0;
#endif

		if (cmds->post_wait_ms)
			usleep_range(cmds->post_wait_ms*1000,
					((cmds->post_wait_ms*1000)+10));
		cmds++;
	}
error:
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	mutex_unlock(&vdd->cmd_lock);
#endif

	return rc;
}

static int dsi_panel_pinctrl_deinit(struct dsi_panel *panel)
{
	int rc = 0;

	if (panel->host_config.ext_bridge_mode)
		return 0;

	devm_pinctrl_put(panel->pinctrl.pinctrl);

	return rc;
}

static int dsi_panel_pinctrl_init(struct dsi_panel *panel)
{
	int rc = 0;

	if (panel->host_config.ext_bridge_mode)
		return 0;

	/* TODO:  pinctrl is defined in dsi dt node */
	panel->pinctrl.pinctrl = devm_pinctrl_get(panel->parent);
	if (IS_ERR_OR_NULL(panel->pinctrl.pinctrl)) {
		rc = PTR_ERR(panel->pinctrl.pinctrl);
		DSI_ERR("failed to get pinctrl, rc=%d\n", rc);
		goto error;
	}

	panel->pinctrl.active = pinctrl_lookup_state(panel->pinctrl.pinctrl,
						       "panel_active");
	if (IS_ERR_OR_NULL(panel->pinctrl.active)) {
		rc = PTR_ERR(panel->pinctrl.active);
		DSI_ERR("failed to get pinctrl active state, rc=%d\n", rc);
		goto error;
	}

	panel->pinctrl.suspend =
		pinctrl_lookup_state(panel->pinctrl.pinctrl, "panel_suspend");

	if (IS_ERR_OR_NULL(panel->pinctrl.suspend)) {
		rc = PTR_ERR(panel->pinctrl.suspend);
		DSI_ERR("failed to get pinctrl suspend state, rc=%d\n", rc);
		goto error;
	}

	panel->pinctrl.pwm_pin =
		pinctrl_lookup_state(panel->pinctrl.pinctrl, "pwm_pin");

	if (IS_ERR_OR_NULL(panel->pinctrl.pwm_pin)) {
		panel->pinctrl.pwm_pin = NULL;
		DSI_DEBUG("failed to get pinctrl pwm_pin");
	}

error:
	return rc;
}

static int dsi_panel_wled_register(struct dsi_panel *panel,
		struct dsi_backlight_config *bl)
{
	struct backlight_device *bd;

	bd = backlight_device_get_by_type(BACKLIGHT_RAW);
	if (!bd) {
		DSI_ERR("[%s] fail raw backlight register rc=%d\n",
				panel->name, -EPROBE_DEFER);
		return -EPROBE_DEFER;
	}

	bl->raw_bd = bd;
	return 0;
}

static int dsi_panel_update_backlight(struct dsi_panel *panel,
	u32 bl_lvl)
{
	int rc = 0;
	unsigned long mode_flags = 0;
	struct mipi_dsi_device *dsi = NULL;
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	struct samsung_display_driver_data *vdd;
#endif

	if (!panel || (bl_lvl > 0xffff)) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	dsi = &panel->mipi_device;
	if (unlikely(panel->bl_config.lp_mode)) {
		mode_flags = dsi->mode_flags;
		dsi->mode_flags |= MIPI_DSI_MODE_LPM;
	}

	if (panel->bl_config.bl_inverted_dbv)
		bl_lvl = (((bl_lvl & 0xff) << 8) | (bl_lvl >> 8));

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	vdd = panel->panel_private;
	rc = ss_brightness_dcs(panel->panel_private, bl_lvl, BACKLIGHT_NORMAL);
	if (rc < 0)
		LCD_ERR(vdd, "failed to update dcs backlight:%d\n", bl_lvl);
#else
	rc = mipi_dsi_dcs_set_display_brightness(dsi, bl_lvl);
	if (rc < 0)
		DSI_ERR("failed to update dcs backlight:%d\n", bl_lvl);
#endif

	if (unlikely(panel->bl_config.lp_mode))
		dsi->mode_flags = mode_flags;

	return rc;
}

static int dsi_panel_update_pwm_backlight(struct dsi_panel *panel,
	u32 bl_lvl)
{
	int rc = 0;
	u32 duty = 0;
	u32 period_ns = 0;
	struct dsi_backlight_config *bl;

	if (!panel) {
		DSI_ERR("Invalid Params\n");
		return -EINVAL;
	}

	bl = &panel->bl_config;
	if (!bl->pwm_bl) {
		DSI_ERR("pwm device not found\n");
		return -EINVAL;
	}

	period_ns = bl->pwm_period_usecs * NSEC_PER_USEC;
	duty = bl_lvl * period_ns;
	duty /= bl->bl_max_level;

	rc = pwm_config(bl->pwm_bl, duty, period_ns);
	if (rc) {
		DSI_ERR("[%s] failed to change pwm config, rc=%d\n", panel->name,
			rc);
		goto error;
	}

	if (bl_lvl == 0 && bl->pwm_enabled) {
		pwm_disable(bl->pwm_bl);
		bl->pwm_enabled = false;
		return 0;
	}

	if (bl_lvl != 0 && !bl->pwm_enabled) {
		rc = pwm_enable(bl->pwm_bl);
		if (rc) {
			DSI_ERR("[%s] failed to enable pwm, rc=%d\n", panel->name,
				rc);
			goto error;
		}

		bl->pwm_enabled = true;
	}

error:
	return rc;
}

int dsi_panel_set_backlight(struct dsi_panel *panel, u32 bl_lvl)
{
	int rc = 0;
	struct dsi_backlight_config *bl = &panel->bl_config;

	if (panel->host_config.ext_bridge_mode)
		return 0;

	DSI_DEBUG("backlight type:%d lvl:%d\n", bl->type, bl_lvl);
	switch (bl->type) {
	case DSI_BACKLIGHT_WLED:
		rc = backlight_device_set_brightness(bl->raw_bd, bl_lvl);
		break;
	case DSI_BACKLIGHT_DCS:
		rc = dsi_panel_update_backlight(panel, bl_lvl);
		break;
	case DSI_BACKLIGHT_EXTERNAL:
		break;
	case DSI_BACKLIGHT_PWM:
		rc = dsi_panel_update_pwm_backlight(panel, bl_lvl);
		break;
	default:
		DSI_ERR("Backlight type(%d) not supported\n", bl->type);
		rc = -ENOTSUPP;
	}

	return rc;
}

static u32 dsi_panel_get_brightness(struct dsi_backlight_config *bl)
{
	u32 cur_bl_level;
	struct backlight_device *bd = bl->raw_bd;

	/* default the brightness level to 50% */
	cur_bl_level = bl->bl_max_level >> 1;

	switch (bl->type) {
	case DSI_BACKLIGHT_WLED:
		/* Try to query the backlight level from the backlight device */
		if (bd && bd->ops && bd->ops->get_brightness)
			cur_bl_level = bd->ops->get_brightness(bd);
		break;
	case DSI_BACKLIGHT_DCS:
	case DSI_BACKLIGHT_EXTERNAL:
	case DSI_BACKLIGHT_PWM:
	default:
		/*
		 * Ideally, we should read the backlight level from the
		 * panel. For now, just set it default value.
		 */
		break;
	}

	DSI_DEBUG("cur_bl_level=%d\n", cur_bl_level);
	return cur_bl_level;
}

void dsi_panel_bl_handoff(struct dsi_panel *panel)
{
	struct dsi_backlight_config *bl = &panel->bl_config;

	bl->bl_level = dsi_panel_get_brightness(bl);
}

static int dsi_panel_pwm_register(struct dsi_panel *panel)
{
	int rc = 0;
	struct dsi_backlight_config *bl = &panel->bl_config;

#if (LINUX_VERSION_CODE >= KERNEL_VERSION(5, 19, 0))
	bl->pwm_bl = devm_pwm_get(panel->parent, NULL);
#else
	bl->pwm_bl = devm_of_pwm_get(panel->parent, panel->panel_of_node, NULL);
#endif
	if (IS_ERR_OR_NULL(bl->pwm_bl)) {
		rc = PTR_ERR(bl->pwm_bl);
		DSI_ERR("[%s] failed to request pwm, rc=%d\n", panel->name,
			rc);
		return rc;
	}

	if (panel->pinctrl.pwm_pin) {
		rc = pinctrl_select_state(panel->pinctrl.pinctrl,
			panel->pinctrl.pwm_pin);
		if (rc)
			DSI_ERR("[%s] failed to set pwm pinctrl, rc=%d\n",
				panel->name, rc);
	}

	return 0;
}

static int dsi_panel_bl_register(struct dsi_panel *panel)
{
	int rc = 0;
	struct dsi_backlight_config *bl = &panel->bl_config;

	if (panel->host_config.ext_bridge_mode)
		return 0;

	switch (bl->type) {
	case DSI_BACKLIGHT_WLED:
		rc = dsi_panel_wled_register(panel, bl);
		break;
	case DSI_BACKLIGHT_DCS:
		break;
	case DSI_BACKLIGHT_EXTERNAL:
		break;
	case DSI_BACKLIGHT_PWM:
		rc = dsi_panel_pwm_register(panel);
		break;
	default:
		DSI_ERR("Backlight type(%d) not supported\n", bl->type);
		rc = -ENOTSUPP;
		goto error;
	}

error:
	return rc;
}

static int dsi_panel_bl_unregister(struct dsi_panel *panel)
{
	int rc = 0;
	struct dsi_backlight_config *bl = &panel->bl_config;

	if (panel->host_config.ext_bridge_mode)
		return 0;

	switch (bl->type) {
	case DSI_BACKLIGHT_WLED:
		break;
	case DSI_BACKLIGHT_DCS:
		break;
	case DSI_BACKLIGHT_EXTERNAL:
		break;
	case DSI_BACKLIGHT_PWM:
		break;
	default:
		DSI_ERR("Backlight type(%d) not supported\n", bl->type);
		rc = -ENOTSUPP;
		goto error;
	}

error:
	return rc;
}

static int dsi_panel_parse_timing(struct dsi_mode_info *mode,
				  struct dsi_parser_utils *utils)
{
	int rc = 0;
	u64 tmp64 = 0;
	struct dsi_display_mode *display_mode;
	struct dsi_display_mode_priv_info *priv_info;
	u32 usecs_fps = 0;

	display_mode = container_of(mode, struct dsi_display_mode, timing);

	priv_info = display_mode->priv_info;

	rc = utils->read_u64(utils->data,
			"qcom,mdss-dsi-panel-clockrate", &tmp64);
	if (rc == -EOVERFLOW) {
		tmp64 = 0;
		rc = utils->read_u32(utils->data,
			"qcom,mdss-dsi-panel-clockrate", (u32 *)&tmp64);
	}

	mode->clk_rate_hz = !rc ? tmp64 : 0;
	display_mode->priv_info->clk_rate_hz = mode->clk_rate_hz;

	mode->pclk_scale.numer = 1;
	mode->pclk_scale.denom = 1;
	display_mode->priv_info->pclk_scale = mode->pclk_scale;

	rc = utils->read_u32(utils->data, "qcom,mdss-mdp-transfer-time-us",
				&mode->mdp_transfer_time_us);
	if (rc)
		mode->mdp_transfer_time_us = 0;

	rc = utils->read_u32(utils->data, "qcom,mdss-mdp-transfer-time-us-min",
				&priv_info->mdp_transfer_time_us_min);
	if (rc)
		priv_info->mdp_transfer_time_us_min = 0;
	else if (!rc && mode->mdp_transfer_time_us < priv_info->mdp_transfer_time_us_min)
		mode->mdp_transfer_time_us = priv_info->mdp_transfer_time_us_min;

	rc = utils->read_u32(utils->data, "qcom,mdss-mdp-transfer-time-us-max",
				&priv_info->mdp_transfer_time_us_max);
	if (rc)
		priv_info->mdp_transfer_time_us_max = 0;
	else if (!rc && mode->mdp_transfer_time_us > priv_info->mdp_transfer_time_us_max)
		mode->mdp_transfer_time_us = priv_info->mdp_transfer_time_us_max;

	priv_info->disable_rsc_solver = utils->read_bool(utils->data, "qcom,disable-rsc-solver");

	rc = utils->read_u32(utils->data,
				"qcom,mdss-dsi-panel-framerate",
				&mode->refresh_rate);
	if (rc) {
		DSI_ERR("failed to read qcom,mdss-dsi-panel-framerate, rc=%d\n",
		       rc);
		goto error;
	}

	usecs_fps = DIV_ROUND_UP((1 * 1000 * 1000), mode->refresh_rate);
	if (mode->mdp_transfer_time_us > usecs_fps)
		mode->mdp_transfer_time_us = 0;
	priv_info->mdp_transfer_time_us = mode->mdp_transfer_time_us;

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-panel-width",
				  &mode->h_active);
	if (rc) {
		DSI_ERR("failed to read qcom,mdss-dsi-panel-width, rc=%d\n",
				rc);
		goto error;
	}

	rc = utils->read_u32(utils->data,
				"qcom,mdss-dsi-h-front-porch",
				  &mode->h_front_porch);
	if (rc) {
		DSI_ERR("failed to read qcom,mdss-dsi-h-front-porch, rc=%d\n",
		       rc);
		goto error;
	}

	rc = utils->read_u32(utils->data,
				"qcom,mdss-dsi-h-back-porch",
				  &mode->h_back_porch);
	if (rc) {
		DSI_ERR("failed to read qcom,mdss-dsi-h-back-porch, rc=%d\n",
		       rc);
		goto error;
	}

	rc = utils->read_u32(utils->data,
				"qcom,mdss-dsi-h-pulse-width",
				  &mode->h_sync_width);
	if (rc) {
		DSI_ERR("failed to read qcom,mdss-dsi-h-pulse-width, rc=%d\n",
		       rc);
		goto error;
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-h-sync-skew",
				  &mode->h_skew);
	if (rc)
		DSI_DEBUG("qcom,mdss-dsi-h-sync-skew is not defined, rc=%d\n",
				rc);

	DSI_DEBUG("panel horz active:%d front_portch:%d back_porch:%d sync_skew:%d\n",
		mode->h_active, mode->h_front_porch, mode->h_back_porch,
		mode->h_sync_width);

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-panel-height",
				  &mode->v_active);
	if (rc) {
		DSI_ERR("failed to read qcom,mdss-dsi-panel-height, rc=%d\n",
		       rc);
		goto error;
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-v-back-porch",
				  &mode->v_back_porch);
	if (rc) {
		DSI_ERR("failed to read qcom,mdss-dsi-v-back-porch, rc=%d\n",
		       rc);
		goto error;
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-v-front-porch",
				  &mode->v_front_porch);
	if (rc) {
		DSI_ERR("failed to read qcom,mdss-dsi-v-back-porch, rc=%d\n",
		       rc);
		goto error;
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-v-pulse-width",
				  &mode->v_sync_width);
	if (rc) {
		DSI_ERR("failed to read qcom,mdss-dsi-v-pulse-width, rc=%d\n",
		       rc);
		goto error;
	}

	rc = utils->read_u32(utils->data, "qcom,qsync-mode-min-refresh-rate", &mode->qsync_min_fps);
	if (rc) {
		DSI_DEBUG("qsync min fps not defined in timing node\n");
		rc = 0;
	}

	rc = utils->read_u32(utils->data, "qcom,dsi-qsync-mode-avr-step-fps", &mode->avr_step_fps);
	if (rc) {
		DSI_DEBUG("avr step fps not defined in timing node\n");
		rc = 0;
	}

	DSI_DEBUG("panel vert active:%d front_portch:%d back_porch:%d pulse_width:%d\n",
		mode->v_active, mode->v_front_porch, mode->v_back_porch,
		mode->v_sync_width);

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	mode->sot_hs_mode = utils->read_bool(utils->data, "samsung,mdss-dsi-sot-hs-mode");
	mode->phs_mode = utils->read_bool(utils->data, "samsung,mdss-dsi-phs-mode");
#endif

error:
	return rc;
}

static int dsi_panel_parse_pixel_format(struct dsi_host_common_cfg *host,
					struct dsi_parser_utils *utils,
					const char *name)
{
	int rc = 0;
	u32 bpp = 0;
	enum dsi_pixel_format fmt;
	const char *packing;
	bool bpp_switch_enabled;

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-bpp", &bpp);
	if (rc) {
		DSI_ERR("[%s] failed to read qcom,mdss-dsi-bpp, rc=%d\n",
		       name, rc);
		return rc;
	}

	host->bpp = bpp;

	switch (bpp) {
	case 3:
		fmt = DSI_PIXEL_FORMAT_RGB111;
		break;
	case 8:
		fmt = DSI_PIXEL_FORMAT_RGB332;
		break;
	case 12:
		fmt = DSI_PIXEL_FORMAT_RGB444;
		break;
	case 16:
		fmt = DSI_PIXEL_FORMAT_RGB565;
		break;
	case 18:
		fmt = DSI_PIXEL_FORMAT_RGB666;
		break;
	case 30:
		fmt = DSI_PIXEL_FORMAT_RGB101010;
		break;
	case 24:
	default:
		fmt = DSI_PIXEL_FORMAT_RGB888;
		break;
	}

	if (fmt == DSI_PIXEL_FORMAT_RGB666) {
		packing = utils->get_property(utils->data,
					  "qcom,mdss-dsi-pixel-packing",
					  NULL);
		if (packing && !strcmp(packing, "loose"))
			fmt = DSI_PIXEL_FORMAT_RGB666_LOOSE;
	}

	host->dst_format = fmt;

	bpp_switch_enabled = utils->read_bool(utils->data, "qcom,mdss-dsi-bpp-switch");
	host->bpp_switch_enabled = bpp_switch_enabled;

	return rc;
}

static int dsi_panel_parse_lane_states(struct dsi_host_common_cfg *host,
				       struct dsi_parser_utils *utils,
				       const char *name)
{
	int rc = 0;
	bool lane_enabled;
	u32 num_of_lanes = 0;

	lane_enabled = utils->read_bool(utils->data,
					    "qcom,mdss-dsi-lane-0-state");
	host->data_lanes |= (lane_enabled ? DSI_DATA_LANE_0 : 0);

	lane_enabled = utils->read_bool(utils->data,
					     "qcom,mdss-dsi-lane-1-state");
	host->data_lanes |= (lane_enabled ? DSI_DATA_LANE_1 : 0);

	lane_enabled = utils->read_bool(utils->data,
					    "qcom,mdss-dsi-lane-2-state");
	host->data_lanes |= (lane_enabled ? DSI_DATA_LANE_2 : 0);

	lane_enabled = utils->read_bool(utils->data,
					     "qcom,mdss-dsi-lane-3-state");
	host->data_lanes |= (lane_enabled ? DSI_DATA_LANE_3 : 0);

	if (host->data_lanes & DSI_DATA_LANE_0)
		num_of_lanes++;
	if (host->data_lanes & DSI_DATA_LANE_1)
		num_of_lanes++;
	if (host->data_lanes & DSI_DATA_LANE_2)
		num_of_lanes++;
	if (host->data_lanes & DSI_DATA_LANE_3)
		num_of_lanes++;

	host->num_data_lanes = num_of_lanes;

	if (host->data_lanes == 0) {
		DSI_ERR("[%s] No data lanes are enabled, rc=%d\n", name, rc);
		rc = -EINVAL;
	}

	return rc;
}

static int dsi_panel_parse_color_swap(struct dsi_host_common_cfg *host,
				      struct dsi_parser_utils *utils,
				      const char *name)
{
	int rc = 0;
	const char *swap_mode;

	swap_mode = utils->get_property(utils->data,
			"qcom,mdss-dsi-color-order", NULL);
	if (swap_mode) {
		if (!strcmp(swap_mode, "rgb_swap_rgb")) {
			host->swap_mode = DSI_COLOR_SWAP_RGB;
		} else if (!strcmp(swap_mode, "rgb_swap_rbg")) {
			host->swap_mode = DSI_COLOR_SWAP_RBG;
		} else if (!strcmp(swap_mode, "rgb_swap_brg")) {
			host->swap_mode = DSI_COLOR_SWAP_BRG;
		} else if (!strcmp(swap_mode, "rgb_swap_grb")) {
			host->swap_mode = DSI_COLOR_SWAP_GRB;
		} else if (!strcmp(swap_mode, "rgb_swap_gbr")) {
			host->swap_mode = DSI_COLOR_SWAP_GBR;
		} else {
			DSI_ERR("[%s] Unrecognized color order-%s\n",
			       name, swap_mode);
			rc = -EINVAL;
		}
	} else {
		DSI_DEBUG("[%s] Falling back to default color order\n", name);
		host->swap_mode = DSI_COLOR_SWAP_RGB;
	}

	/* bit swap on color channel is not defined in dt */
	host->bit_swap_red = false;
	host->bit_swap_green = false;
	host->bit_swap_blue = false;
	return rc;
}

static int dsi_panel_parse_triggers(struct dsi_host_common_cfg *host,
				    struct dsi_parser_utils *utils,
				    const char *name)
{
	const char *trig;
	int rc = 0;

	trig = utils->get_property(utils->data,
			"qcom,mdss-dsi-mdp-trigger", NULL);
	if (trig) {
		if (!strcmp(trig, "none")) {
			host->mdp_cmd_trigger = DSI_TRIGGER_NONE;
		} else if (!strcmp(trig, "trigger_te")) {
			host->mdp_cmd_trigger = DSI_TRIGGER_TE;
		} else if (!strcmp(trig, "trigger_sw")) {
			host->mdp_cmd_trigger = DSI_TRIGGER_SW;
		} else if (!strcmp(trig, "trigger_sw_te")) {
			host->mdp_cmd_trigger = DSI_TRIGGER_SW_TE;
		} else {
			DSI_ERR("[%s] Unrecognized mdp trigger type (%s)\n",
			       name, trig);
			rc = -EINVAL;
		}

	} else {
		DSI_DEBUG("[%s] Falling back to default MDP trigger\n",
			 name);
		host->mdp_cmd_trigger = DSI_TRIGGER_SW;
	}

	trig = utils->get_property(utils->data,
			"qcom,mdss-dsi-dma-trigger", NULL);
	if (trig) {
		if (!strcmp(trig, "none")) {
			host->dma_cmd_trigger = DSI_TRIGGER_NONE;
		} else if (!strcmp(trig, "trigger_te")) {
			host->dma_cmd_trigger = DSI_TRIGGER_TE;
		} else if (!strcmp(trig, "trigger_sw")) {
			host->dma_cmd_trigger = DSI_TRIGGER_SW;
		} else if (!strcmp(trig, "trigger_sw_seof")) {
			host->dma_cmd_trigger = DSI_TRIGGER_SW_SEOF;
		} else if (!strcmp(trig, "trigger_sw_te")) {
			host->dma_cmd_trigger = DSI_TRIGGER_SW_TE;
		} else {
			DSI_ERR("[%s] Unrecognized mdp trigger type (%s)\n",
			       name, trig);
			rc = -EINVAL;
		}

	} else {
		DSI_DEBUG("[%s] Falling back to default MDP trigger\n", name);
		host->dma_cmd_trigger = DSI_TRIGGER_SW;
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-te-pin-select",
			&host->te_mode);
	if (rc) {
		DSI_WARN("[%s] fallback to default te-pin-select\n", name);
		host->te_mode = 1;
		rc = 0;
	}

	return rc;
}

static int dsi_panel_parse_misc_host_config(struct dsi_host_common_cfg *host,
					    struct dsi_parser_utils *utils,
					    const char *name)
{
	u32 val = 0, line_no = 0, window = 0;
	int rc = 0;
	bool panel_cphy_mode = false;

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-t-clk-post", &val);
	if (!rc) {
		host->t_clk_post = val;
		DSI_DEBUG("[%s] t_clk_post = %d\n", name, val);
	}

	val = 0;
	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-t-clk-pre", &val);
	if (!rc) {
		host->t_clk_pre = val;
		DSI_DEBUG("[%s] t_clk_pre = %d\n", name, val);
	}

	host->ignore_rx_eot = utils->read_bool(utils->data,
						"qcom,mdss-dsi-rx-eot-ignore");

	host->append_tx_eot = utils->read_bool(utils->data,
						"qcom,mdss-dsi-tx-eot-append");

	host->ext_bridge_mode = utils->read_bool(utils->data,
					"qcom,mdss-dsi-ext-bridge-mode");

	host->force_hs_clk_lane = utils->read_bool(utils->data,
					"qcom,mdss-dsi-force-clock-lane-hs");
	panel_cphy_mode = utils->read_bool(utils->data,
					"qcom,panel-cphy-mode");
	host->phy_type = panel_cphy_mode ? DSI_PHY_TYPE_CPHY
						: DSI_PHY_TYPE_DPHY;

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-dma-schedule-line",
				  &line_no);
	if (rc)
		host->dma_sched_line = 0;
	else
		host->dma_sched_line = line_no;

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-dma-schedule-window",
				  &window);
	if (rc)
		host->dma_sched_window = 0;
	else
		host->dma_sched_window = window;
	rc = utils->read_u32(utils->data, "qcom,vert-padding-value", &host->vpadding);
	host->line_insertion_enable = (rc || host->vpadding <= 0) ? false : true;
	DSI_DEBUG("[%s] DMA scheduling parameters Line: %d Window: %d\n", name,
			host->dma_sched_line, host->dma_sched_window);
	return 0;
}

static void dsi_panel_parse_split_link_config(struct dsi_host_common_cfg *host,
					struct dsi_parser_utils *utils,
					const char *name)
{
	int rc = 0;
	u32 val = 0;
	bool supported = false;
	struct dsi_split_link_config *split_link = &host->split_link;

	supported = utils->read_bool(utils->data, "qcom,split-link-enabled");

	if (!supported) {
		DSI_DEBUG("[%s] Split link is not supported\n", name);
		split_link->enabled = false;
		return;
	}

	rc = utils->read_u32(utils->data, "qcom,sublinks-count", &val);
	if (rc || val < 1) {
		DSI_DEBUG("[%s] Using default sublinks count\n", name);
		split_link->num_sublinks = 2;
	} else {
		split_link->num_sublinks = val;
	}

	rc = utils->read_u32(utils->data, "qcom,lanes-per-sublink", &val);
	if (rc || val < 1) {
		DSI_DEBUG("[%s] Using default lanes per sublink\n", name);
		split_link->lanes_per_sublink = 2;
	} else {
		split_link->lanes_per_sublink = val;
	}

	supported = utils->read_bool(utils->data, "qcom,split-link-sublink-swap");

	if (!supported)
		split_link->sublink_swap = false;

	DSI_DEBUG("[%s] Split link is supported %d-%d\n", name,
		split_link->num_sublinks, split_link->lanes_per_sublink);
	split_link->enabled = true;
}

static int dsi_panel_parse_host_config(struct dsi_panel *panel)
{
	int rc = 0;
	struct dsi_parser_utils *utils = &panel->utils;

	rc = dsi_panel_parse_pixel_format(&panel->host_config, utils,
					  panel->name);
	if (rc) {
		DSI_ERR("[%s] failed to get pixel format, rc=%d\n",
		panel->name, rc);
		goto error;
	}

	rc = dsi_panel_parse_lane_states(&panel->host_config, utils,
					 panel->name);
	if (rc) {
		DSI_ERR("[%s] failed to parse lane states, rc=%d\n",
		       panel->name, rc);
		goto error;
	}

	rc = dsi_panel_parse_color_swap(&panel->host_config, utils,
					panel->name);
	if (rc) {
		DSI_ERR("[%s] failed to parse color swap config, rc=%d\n",
		       panel->name, rc);
		goto error;
	}

	rc = dsi_panel_parse_triggers(&panel->host_config, utils,
				      panel->name);
	if (rc) {
		DSI_ERR("[%s] failed to parse triggers, rc=%d\n",
		       panel->name, rc);
		goto error;
	}

	rc = dsi_panel_parse_misc_host_config(&panel->host_config, utils,
					      panel->name);
	if (rc) {
		DSI_ERR("[%s] failed to parse misc host config, rc=%d\n",
		       panel->name, rc);
		goto error;
	}

	dsi_panel_parse_split_link_config(&panel->host_config, utils,
						panel->name);

error:
	return rc;
}

static int dsi_panel_parse_avr_caps(struct dsi_panel *panel,
				     struct device_node *of_node)
{
	struct dsi_avr_capabilities *avr_caps = &panel->avr_caps;
	struct dsi_parser_utils *utils = &panel->utils;
	int val, rc = 0;

	rc = of_property_read_u32(of_node, "qcom,dsi-qsync-avr-step-fps", &val);
	if (rc)
		DSI_DEBUG("[%s] avr step fps not defined rc:%d\n", panel->name, rc);
	avr_caps->avr_step_fps = rc ? 0 : val;

	val = utils->count_u32_elems(utils->data, "qcom,dsi-qsync-avr-step-list");
	if (val <= 0) {
		DSI_DEBUG("[%s] optional avr step list not defined, val:%d\n", panel->name, val);
		return 0;
	} else if (val > 1 && val != panel->dfps_caps.dfps_list_len) {
		DSI_ERR("[%s] avr step list size %d not same as dfps list %d\n",
				panel->name, val, panel->dfps_caps.dfps_list_len);
		return -EINVAL;
	} else if ((val > 0) && (avr_caps->avr_step_fps)) {
		DSI_ERR("[%s] both modes of avr-steps are defined\n", panel->name);
		return -EINVAL;
	}

	avr_caps->avr_step_fps_list = kcalloc(val, sizeof(u32), GFP_KERNEL);
	if (!avr_caps->avr_step_fps_list)
		return -ENOMEM;

	rc = utils->read_u32_array(utils->data, "qcom,dsi-qsync-avr-step-list",
			avr_caps->avr_step_fps_list, val);
	if (rc) {
		kfree(avr_caps->avr_step_fps_list);
		return rc;
	}

	avr_caps->avr_step_fps_list_len = val;
	return rc;
}

static int dsi_panel_parse_qsync_caps(struct dsi_panel *panel,
				     struct device_node *of_node)
{
	int rc = 0;
	u32 val = 0, i;
	struct dsi_qsync_capabilities *qsync_caps = &panel->qsync_caps;
	struct dsi_parser_utils *utils = &panel->utils;
	const char *name = panel->name;

	qsync_caps->qsync_support = utils->read_bool(utils->data, "qcom,qsync-enable");
	if (!qsync_caps->qsync_support) {
		DSI_DEBUG("qsync feature not enabled\n");
		goto error;
	}

	/**
	 * "mdss-dsi-qsync-min-refresh-rate" is defined in cmd mode and
	 *  video mode when there is only one qsync min fps present.
	 */
	rc = of_property_read_u32(of_node,
				  "qcom,mdss-dsi-qsync-min-refresh-rate",
				  &val);
	if (rc)
		DSI_DEBUG("[%s] qsync min fps not defined rc:%d\n",
			panel->name, rc);

	qsync_caps->qsync_min_fps = val;

	/**
	 * "dsi-supported-qsync-min-fps-list" may be defined in video
	 *  mode, only in dfps case when "qcom,dsi-supported-dfps-list"
	 *  is defined.
	 */
	qsync_caps->qsync_min_fps_list_len = utils->count_u32_elems(utils->data,
				  "qcom,dsi-supported-qsync-min-fps-list");
	if (qsync_caps->qsync_min_fps_list_len < 1) {
		qsync_caps->qsync_min_fps_list_len = 0;
		goto qsync_support;
	}

	/**
	 * qcom,dsi-supported-qsync-min-fps-list cannot be defined
	 *  along with qcom,mdss-dsi-qsync-min-refresh-rate.
	 */
	if (qsync_caps->qsync_min_fps_list_len >= 1 &&
		qsync_caps->qsync_min_fps) {
		DSI_ERR("[%s] Both qsync nodes are defined\n",
				name);
		rc = -EINVAL;
		goto error;
	}

	if (panel->dfps_caps.dfps_list_len !=
			qsync_caps->qsync_min_fps_list_len) {
		DSI_ERR("[%s] Qsync min fps list mismatch with dfps\n", name);
		rc = -EINVAL;
		goto error;
	}

	qsync_caps->qsync_min_fps_list =
		kcalloc(qsync_caps->qsync_min_fps_list_len, sizeof(u32),
			GFP_KERNEL);
	if (!qsync_caps->qsync_min_fps_list) {
		rc = -ENOMEM;
		goto error;
	}

	rc = utils->read_u32_array(utils->data,
			"qcom,dsi-supported-qsync-min-fps-list",
			qsync_caps->qsync_min_fps_list,
			qsync_caps->qsync_min_fps_list_len);
	if (rc) {
		DSI_ERR("[%s] Qsync min fps list parse failed\n", name);
		rc = -EINVAL;
		goto error;
	}

	qsync_caps->qsync_min_fps = qsync_caps->qsync_min_fps_list[0];

	for (i = 1; i < qsync_caps->qsync_min_fps_list_len; i++) {
		if (qsync_caps->qsync_min_fps_list[i] <
				qsync_caps->qsync_min_fps)
			qsync_caps->qsync_min_fps =
				qsync_caps->qsync_min_fps_list[i];
	}

qsync_support:
	/* allow qsync support only if DFPS is with VFP approach */
	if ((panel->dfps_caps.dfps_support) &&
	    !(panel->dfps_caps.type == DSI_DFPS_IMMEDIATE_VFP)) {
		qsync_caps->qsync_support = false;
		qsync_caps->qsync_min_fps = 0;
	}

error:
	if (rc < 0) {
		qsync_caps->qsync_min_fps = 0;
		qsync_caps->qsync_min_fps_list_len = 0;
	}
	return rc;
}

static int dsi_panel_parse_dyn_clk_list(struct dsi_display_mode *mode,
		struct dsi_parser_utils *utils)
{
	int i, rc = 0;
	struct msm_dyn_clk_list *bit_clk_list;

	if (!mode || !mode->priv_info) {
		DSI_ERR("invalid arguments\n");
		return -EINVAL;
	}

	bit_clk_list = &mode->priv_info->bit_clk_list;

	bit_clk_list->count = utils->count_u32_elems(utils->data, "qcom,dsi-dyn-clk-list");
	if (bit_clk_list->count < 1 || bit_clk_list->count > 100) {
		DSI_ERR("invalid number of bit clock values, must be between 1 and 100\n");
		return -EINVAL;
	}

	bit_clk_list->rates = kcalloc(bit_clk_list->count, sizeof(u32), GFP_KERNEL);
	if (!bit_clk_list->rates) {
		DSI_ERR("failed to allocate space for bit clock list\n");
		rc = -ENOMEM;
		goto error;
	}

	bit_clk_list->front_porches = kcalloc(bit_clk_list->count, sizeof(u32), GFP_KERNEL);
	if (!bit_clk_list->front_porches) {
		DSI_ERR("failed to allocate space for front porch list\n");
		rc = -ENOMEM;
		goto error;
	}

	bit_clk_list->pixel_clks_khz = kcalloc(bit_clk_list->count, sizeof(u32), GFP_KERNEL);
	if (!bit_clk_list->pixel_clks_khz) {
		DSI_ERR("failed to allocate space for pclk list\n");
		rc = -ENOMEM;
		goto error;
	}

	rc = utils->read_u32_array(utils->data, "qcom,dsi-dyn-clk-list",
			bit_clk_list->rates, bit_clk_list->count);
	if (rc) {
		DSI_ERR("failed to parse supported bit clk list values, rc=%d\n", rc);
		goto error;
	}

	for (i = 0; i < bit_clk_list->count; i++)
		DSI_DEBUG("bit clk rate[%d]:%d\n", i, bit_clk_list->rates[i]);

	return 0;

error:
	bit_clk_list->count = 0;
	kfree(bit_clk_list->rates);
	kfree(bit_clk_list->front_porches);
	kfree(bit_clk_list->pixel_clks_khz);

	return rc;
}

static int dsi_panel_parse_dyn_clk_caps(struct dsi_panel *panel)
{
	int rc = 0;
	bool supported = false;
	struct dsi_dyn_clk_caps *dyn_clk_caps = &panel->dyn_clk_caps;
	struct dsi_parser_utils *utils = &panel->utils;
	const char *type;

	supported = utils->read_bool(utils->data, "qcom,dsi-dyn-clk-enable");

	if (!supported) {
		dyn_clk_caps->dyn_clk_support = false;
		return rc;
	}

	dyn_clk_caps->dyn_clk_support = true;

	type = utils->get_property(utils->data,
		"qcom,dsi-dyn-clk-type", NULL);
	if (!type) {
		dyn_clk_caps->type = DSI_DYN_CLK_TYPE_LEGACY;
		dyn_clk_caps->maintain_const_fps = false;
		return 0;
	}
	if (!strcmp(type, "constant-fps-adjust-hfp")) {
		dyn_clk_caps->type = DSI_DYN_CLK_TYPE_CONST_FPS_ADJUST_HFP;
		dyn_clk_caps->maintain_const_fps = true;
	} else if (!strcmp(type, "constant-fps-adjust-vfp")) {
		dyn_clk_caps->type = DSI_DYN_CLK_TYPE_CONST_FPS_ADJUST_VFP;
		dyn_clk_caps->maintain_const_fps = true;
	} else {
		dyn_clk_caps->type = DSI_DYN_CLK_TYPE_LEGACY;
		dyn_clk_caps->maintain_const_fps = false;
	}
	DSI_DEBUG("Dynamic clock type is [%s]\n", type);
	return 0;
}

static int dsi_panel_parse_dfps_caps(struct dsi_panel *panel)
{
	int rc = 0;
	bool supported = false;
	struct dsi_dfps_capabilities *dfps_caps = &panel->dfps_caps;
	struct dsi_parser_utils *utils = &panel->utils;
	const char *name = panel->name;
	const char *type;
	u32 i;

	supported = utils->read_bool(utils->data,
			"qcom,mdss-dsi-pan-enable-dynamic-fps");

	if (!supported) {
		DSI_DEBUG("[%s] DFPS is not supported\n", name);
		dfps_caps->dfps_support = false;
		return rc;
	}

	type = utils->get_property(utils->data,
			"qcom,mdss-dsi-pan-fps-update", NULL);
	if (!type) {
		DSI_ERR("[%s] dfps type not defined\n", name);
		rc = -EINVAL;
		goto error;
	} else if (!strcmp(type, "dfps_suspend_resume_mode")) {
		dfps_caps->type = DSI_DFPS_SUSPEND_RESUME;
	} else if (!strcmp(type, "dfps_immediate_clk_mode")) {
		dfps_caps->type = DSI_DFPS_IMMEDIATE_CLK;
	} else if (!strcmp(type, "dfps_immediate_porch_mode_hfp")) {
		dfps_caps->type = DSI_DFPS_IMMEDIATE_HFP;
	} else if (!strcmp(type, "dfps_immediate_porch_mode_vfp")) {
		dfps_caps->type = DSI_DFPS_IMMEDIATE_VFP;
	} else {
		DSI_ERR("[%s] dfps type is not recognized\n", name);
		rc = -EINVAL;
		goto error;
	}

	dfps_caps->dfps_list_len = utils->count_u32_elems(utils->data,
				  "qcom,dsi-supported-dfps-list");
	if (dfps_caps->dfps_list_len < 1) {
		DSI_ERR("[%s] dfps refresh list not present\n", name);
		rc = -EINVAL;
		goto error;
	}

	dfps_caps->dfps_list = kcalloc(dfps_caps->dfps_list_len, sizeof(u32),
			GFP_KERNEL);
	if (!dfps_caps->dfps_list) {
		rc = -ENOMEM;
		goto error;
	}

	rc = utils->read_u32_array(utils->data,
			"qcom,dsi-supported-dfps-list",
			dfps_caps->dfps_list,
			dfps_caps->dfps_list_len);
	if (rc) {
		DSI_ERR("[%s] dfps refresh rate list parse failed\n", name);
		rc = -EINVAL;
		goto error;
	}
	dfps_caps->dfps_support = true;

	/* calculate max and min fps */
	dfps_caps->max_refresh_rate = dfps_caps->dfps_list[0];
	dfps_caps->min_refresh_rate = dfps_caps->dfps_list[0];

	for (i = 1; i < dfps_caps->dfps_list_len; i++) {
		if (dfps_caps->dfps_list[i] < dfps_caps->min_refresh_rate)
			dfps_caps->min_refresh_rate = dfps_caps->dfps_list[i];
		else if (dfps_caps->dfps_list[i] > dfps_caps->max_refresh_rate)
			dfps_caps->max_refresh_rate = dfps_caps->dfps_list[i];
	}

error:
	return rc;
}

static int dsi_panel_parse_video_host_config(struct dsi_video_engine_cfg *cfg,
					     struct dsi_parser_utils *utils,
					     const char *name)
{
	int rc = 0;
	const char *traffic_mode;
	u32 vc_id = 0;
	u32 val = 0;

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-h-sync-pulse", &val);
	if (rc) {
		DSI_DEBUG("[%s] fallback to default h-sync-pulse\n", name);
		cfg->pulse_mode_hsa_he = false;
	} else if (val == 1) {
		cfg->pulse_mode_hsa_he = true;
	} else if (val == 0) {
		cfg->pulse_mode_hsa_he = false;
	} else {
		DSI_ERR("[%s] Unrecognized value for mdss-dsi-h-sync-pulse\n",
		       name);
		rc = -EINVAL;
		goto error;
	}

	cfg->hfp_lp11_en = utils->read_bool(utils->data,
						"qcom,mdss-dsi-hfp-power-mode");

	cfg->hbp_lp11_en = utils->read_bool(utils->data,
						"qcom,mdss-dsi-hbp-power-mode");

	cfg->hsa_lp11_en = utils->read_bool(utils->data,
						"qcom,mdss-dsi-hsa-power-mode");

	cfg->last_line_interleave_en = utils->read_bool(utils->data,
					"qcom,mdss-dsi-last-line-interleave");

	cfg->eof_bllp_lp11_en = utils->read_bool(utils->data,
					"qcom,mdss-dsi-bllp-eof-power-mode");

	cfg->bllp_lp11_en = utils->read_bool(utils->data,
					"qcom,mdss-dsi-bllp-power-mode");

	traffic_mode = utils->get_property(utils->data,
				       "qcom,mdss-dsi-traffic-mode",
				       NULL);
	if (!traffic_mode) {
		DSI_DEBUG("[%s] Falling back to default traffic mode\n", name);
		cfg->traffic_mode = DSI_VIDEO_TRAFFIC_SYNC_PULSES;
	} else if (!strcmp(traffic_mode, "non_burst_sync_pulse")) {
		cfg->traffic_mode = DSI_VIDEO_TRAFFIC_SYNC_PULSES;
	} else if (!strcmp(traffic_mode, "non_burst_sync_event")) {
		cfg->traffic_mode = DSI_VIDEO_TRAFFIC_SYNC_START_EVENTS;
	} else if (!strcmp(traffic_mode, "burst_mode")) {
		cfg->traffic_mode = DSI_VIDEO_TRAFFIC_BURST_MODE;
	} else {
		DSI_ERR("[%s] Unrecognized traffic mode-%s\n", name,
		       traffic_mode);
		rc = -EINVAL;
		goto error;
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-virtual-channel-id",
				  &vc_id);
	if (rc) {
		DSI_DEBUG("[%s] Fallback to default vc id\n", name);
		cfg->vc_id = 0;
	} else {
		cfg->vc_id = vc_id;
	}

error:
	return rc;
}

static int dsi_panel_parse_cmd_host_config(struct dsi_cmd_engine_cfg *cfg,
					   struct dsi_parser_utils *utils,
					   const char *name)
{
	u32 val = 0;
	int rc = 0;

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-wr-mem-start", &val);
	if (rc) {
		DSI_DEBUG("[%s] Fallback to default wr-mem-start\n", name);
		cfg->wr_mem_start = 0x2C;
	} else {
		cfg->wr_mem_start = val;
	}

	val = 0;
	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-wr-mem-continue",
				  &val);
	if (rc) {
		DSI_DEBUG("[%s] Fallback to default wr-mem-continue\n", name);
		cfg->wr_mem_continue = 0x3C;
	} else {
		cfg->wr_mem_continue = val;
	}

	/* TODO:  fix following */
	cfg->max_cmd_packets_interleave = 0;

	val = 0;
	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-te-dcs-command",
				  &val);
	if (rc) {
		DSI_DEBUG("[%s] fallback to default te-dcs-cmd\n", name);
		cfg->insert_dcs_command = true;
	} else if (val == 1) {
		cfg->insert_dcs_command = true;
	} else if (val == 0) {
		cfg->insert_dcs_command = false;
	} else {
		DSI_ERR("[%s] Unrecognized value for mdss-dsi-te-dcs-command\n",
		       name);
		rc = -EINVAL;
		goto error;
	}

	cfg->mdp_idle_ctrl_en =
		utils->read_bool(utils->data, "qcom,mdss-dsi-mdp-idle-ctrl-en");

	if (cfg->mdp_idle_ctrl_en) {
		val = 0;
		rc = utils->read_u32(utils->data, "qcom,mdss-dsi-mdp-idle-ctrl-len", &val);
		if (rc) {
			DSI_DEBUG("[%s] mdp idle ctrl len is not defined\n", name);
			cfg->mdp_idle_ctrl_len = 0;
			cfg->mdp_idle_ctrl_en = false;
			rc = 0;
		} else {
			cfg->mdp_idle_ctrl_len = val;
		}
	}
error:
	return rc;
}

static int dsi_panel_parse_panel_mode(struct dsi_panel *panel)
{
	int rc = 0;
	struct dsi_parser_utils *utils = &panel->utils;
	bool panel_mode_switch_enabled;
	enum dsi_op_mode panel_mode;
	const char *mode;

	mode = utils->get_property(utils->data,
			"qcom,mdss-dsi-panel-type", NULL);
	if (!mode) {
		DSI_DEBUG("[%s] Fallback to default panel mode\n", panel->name);
		panel_mode = DSI_OP_VIDEO_MODE;
	} else if (!strcmp(mode, "dsi_video_mode")) {
		panel_mode = DSI_OP_VIDEO_MODE;
	} else if (!strcmp(mode, "dsi_cmd_mode")) {
		panel_mode = DSI_OP_CMD_MODE;
	} else {
		DSI_ERR("[%s] Unrecognized panel type-%s\n", panel->name, mode);
		rc = -EINVAL;
		goto error;
	}

	panel_mode_switch_enabled = utils->read_bool(utils->data,
					"qcom,mdss-dsi-panel-mode-switch");

	DSI_DEBUG("%s: panel operating mode switch feature %s\n", __func__,
		(panel_mode_switch_enabled ? "enabled" : "disabled"));

	if (panel_mode == DSI_OP_VIDEO_MODE || panel_mode_switch_enabled) {
		rc = dsi_panel_parse_video_host_config(&panel->video_config,
						       utils,
						       panel->name);
		if (rc) {
			DSI_ERR("[%s] Failed to parse video host cfg, rc=%d\n",
			       panel->name, rc);
			goto error;
		}
	}

	if (panel_mode == DSI_OP_CMD_MODE || panel_mode_switch_enabled) {
		rc = dsi_panel_parse_cmd_host_config(&panel->cmd_config,
						     utils,
						     panel->name);
		if (rc) {
			DSI_ERR("[%s] Failed to parse cmd host config, rc=%d\n",
			       panel->name, rc);
			goto error;
		}
	}

	panel->poms_align_vsync = utils->read_bool(utils->data,
					"qcom,poms-align-panel-vsync");
	panel->panel_mode = panel_mode;
	panel->panel_mode_switch_enabled = panel_mode_switch_enabled;

	panel->panel_ack_disabled = utils->read_bool(utils->data,
					"qcom,panel-ack-disabled");
error:
	return rc;
}

static int dsi_panel_parse_phy_props(struct dsi_panel *panel)
{
	int rc = 0;
	u32 val = 0;
	const char *str;
	struct dsi_panel_phy_props *props = &panel->phy_props;
	struct dsi_parser_utils *utils = &panel->utils;
	const char *name = panel->name;

	rc = utils->read_u32(utils->data,
		  "qcom,mdss-pan-physical-width-dimension", &val);
	if (rc) {
		DSI_DEBUG("[%s] Physical panel width is not defined\n", name);
		props->panel_width_mm = 0;
		rc = 0;
	} else {
		props->panel_width_mm = val;
	}

	rc = utils->read_u32(utils->data,
				  "qcom,mdss-pan-physical-height-dimension",
				  &val);
	if (rc) {
		DSI_DEBUG("[%s] Physical panel height is not defined\n", name);
		props->panel_height_mm = 0;
		rc = 0;
	} else {
		props->panel_height_mm = val;
	}

	str = utils->get_property(utils->data,
			"qcom,mdss-dsi-panel-orientation", NULL);
	if (!str) {
		props->rotation = DSI_PANEL_ROTATE_NONE;
	} else if (!strcmp(str, "180")) {
		props->rotation = DSI_PANEL_ROTATE_HV_FLIP;
	} else if (!strcmp(str, "hflip")) {
		props->rotation = DSI_PANEL_ROTATE_H_FLIP;
	} else if (!strcmp(str, "vflip")) {
		props->rotation = DSI_PANEL_ROTATE_V_FLIP;
	} else {
		DSI_ERR("[%s] Unrecognized panel rotation-%s\n", name, str);
		rc = -EINVAL;
		goto error;
	}
error:
	return rc;
}
const char *cmd_set_prop_map[DSI_CMD_SET_MAX] = {
	"qcom,mdss-dsi-pre-on-command",
	"qcom,mdss-dsi-on-command",
	"qcom,vid-on-commands",
	"qcom,cmd-on-commands",
	"qcom,mdss-dsi-post-panel-on-command",
	"qcom,mdss-dsi-pre-off-command",
	"qcom,mdss-dsi-off-command",
	"qcom,mdss-dsi-post-off-command",
	"qcom,mdss-dsi-pre-res-switch",
	"qcom,mdss-dsi-res-switch",
	"qcom,mdss-dsi-post-res-switch",
	"qcom,video-mode-switch-in-commands",
	"qcom,video-mode-switch-out-commands",
	"qcom,cmd-mode-switch-in-commands",
	"qcom,cmd-mode-switch-out-commands",
	"qcom,mdss-dsi-panel-status-command",
	"qcom,mdss-dsi-lp1-command",
	"qcom,mdss-dsi-lp2-command",
	"qcom,mdss-dsi-nolp-command",
	"PPS not parsed from DTSI, generated dynamically",
	"ROI not parsed from DTSI, generated dynamically",
	"qcom,mdss-dsi-timing-switch-command",
	"qcom,mdss-dsi-post-mode-switch-on-command",
	"qcom,mdss-dsi-qsync-on-commands",
	"qcom,mdss-dsi-qsync-off-commands",
};

const char *cmd_set_state_map[DSI_CMD_SET_MAX] = {
	"qcom,mdss-dsi-pre-on-command-state",
	"qcom,mdss-dsi-on-command-state",
	"qcom,vid-on-commands-state",
	"qcom,cmd-on-commands-state",
	"qcom,mdss-dsi-post-on-command-state",
	"qcom,mdss-dsi-pre-off-command-state",
	"qcom,mdss-dsi-off-command-state",
	"qcom,mdss-dsi-post-off-command-state",
	"qcom,mdss-dsi-pre-res-switch-state",
	"qcom,mdss-dsi-res-switch-state",
	"qcom,mdss-dsi-post-res-switch-state",
	"qcom,video-mode-switch-in-commands-state",
	"qcom,video-mode-switch-out-commands-state",
	"qcom,cmd-mode-switch-in-commands-state",
	"qcom,cmd-mode-switch-out-commands-state",
	"qcom,mdss-dsi-panel-status-command-state",
	"qcom,mdss-dsi-lp1-command-state",
	"qcom,mdss-dsi-lp2-command-state",
	"qcom,mdss-dsi-nolp-command-state",
	"PPS not parsed from DTSI, generated dynamically",
	"ROI not parsed from DTSI, generated dynamically",
	"qcom,mdss-dsi-timing-switch-command-state",
	"qcom,mdss-dsi-post-mode-switch-on-command-state",
	"qcom,mdss-dsi-qsync-on-commands-state",
	"qcom,mdss-dsi-qsync-off-commands-state",
};

int dsi_panel_get_cmd_pkt_count(const char *data, u32 length, u32 *cnt)
{
	const u32 cmd_set_min_size = 7;
	u32 count = 0;
	u32 packet_length;
	u32 tmp;

	while (length >= cmd_set_min_size) {
		packet_length = cmd_set_min_size;
		tmp = ((data[5] << 8) | (data[6]));
		packet_length += tmp;
		if (packet_length > length) {
			DSI_ERR("format error\n");
			return -EINVAL;
		}
		length -= packet_length;
		data += packet_length;
		count++;
	}

	*cnt = count;
	return 0;
}

int dsi_panel_create_cmd_packets(const char *data,
					u32 length,
					u32 count,
					struct dsi_cmd_desc *cmd)
{
	int rc = 0;
	int i, j;
	u8 *payload;

	for (i = 0; i < count; i++) {
		u32 size;

		cmd[i].msg.type = data[0];
		cmd[i].msg.channel = data[2];
		cmd[i].msg.flags |= data[3];
		cmd[i].ctrl = 0;
		cmd[i].post_wait_ms = data[4];
		cmd[i].msg.tx_len = ((data[5] << 8) | (data[6]));

		if (cmd[i].msg.flags & MIPI_DSI_MSG_BATCH_COMMAND)
			cmd[i].last_command = false;
		else
			cmd[i].last_command = true;

		size = cmd[i].msg.tx_len * sizeof(u8);

		payload = kzalloc(size, GFP_KERNEL);
		if (!payload) {
			rc = -ENOMEM;
			goto error_free_payloads;
		}

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
		cmd[i].ss_txbuf = payload;
#endif

		for (j = 0; j < cmd[i].msg.tx_len; j++)
			payload[j] = data[7 + j];

		cmd[i].msg.tx_buf = payload;
		data += (7 + cmd[i].msg.tx_len);
	}

	return rc;
error_free_payloads:
	for (i = i - 1; i >= 0; i--) {
		cmd--;
		kfree(cmd->msg.tx_buf);
	}

	return rc;
}

void dsi_panel_destroy_cmd_packets(struct dsi_panel_cmd_set *set)
{
	u32 i = 0;
	struct dsi_cmd_desc *cmd;

	for (i = 0; i < set->count; i++) {
		cmd = &set->cmds[i];
		kfree(cmd->msg.tx_buf);
	}
}

void dsi_panel_dealloc_cmd_packets(struct dsi_panel_cmd_set *set)
{
	kfree(set->cmds);
}

int dsi_panel_alloc_cmd_packets(struct dsi_panel_cmd_set *cmd,
					u32 packet_count)
{
	u32 size;

	size = packet_count * sizeof(*cmd->cmds);
	cmd->cmds = kzalloc(size, GFP_KERNEL);
	if (!cmd->cmds)
		return -ENOMEM;

	cmd->count = packet_count;
	return 0;
}

static int dsi_panel_parse_cmd_sets_sub(struct dsi_panel_cmd_set *cmd,
					enum dsi_cmd_set_type type,
					struct dsi_parser_utils *utils)
{
	int rc = 0;
	u32 length = 0;
	const char *data;
	const char *state;
	u32 packet_count = 0;

	data = utils->get_property(utils->data, cmd_set_prop_map[type],
			&length);
	if (!data) {
		DSI_DEBUG("%s commands not defined\n", cmd_set_prop_map[type]);
		rc = -ENOTSUPP;
		goto error;
	}

	DSI_DEBUG("type=%d, name=%s, length=%d\n", type, cmd_set_prop_map[type], length);

#if !IS_ENABLED(CONFIG_DISPLAY_SAMSUNG) /* prevent log flood */
	print_hex_dump_debug("", DUMP_PREFIX_NONE, 8, 1, data, length, false);
#endif

	rc = dsi_panel_get_cmd_pkt_count(data, length, &packet_count);
	if (rc) {
		DSI_ERR("commands failed, rc=%d\n", rc);
		goto error;
	}
	DSI_DEBUG("[%s] packet-count=%d, %d\n", cmd_set_prop_map[type],
		packet_count, length);

	rc = dsi_panel_alloc_cmd_packets(cmd, packet_count);
	if (rc) {
		DSI_ERR("failed to allocate cmd packets, rc=%d\n", rc);
		goto error;
	}

	rc = dsi_panel_create_cmd_packets(data, length, packet_count,
					  cmd->cmds);
	if (rc) {
		DSI_ERR("failed to create cmd packets, rc=%d\n", rc);
		goto error_free_mem;
	}

	state = utils->get_property(utils->data, cmd_set_state_map[type], NULL);
	if (!state || !strcmp(state, "dsi_lp_mode")) {
		cmd->state = DSI_CMD_SET_STATE_LP;
	} else if (!strcmp(state, "dsi_hs_mode")) {
		cmd->state = DSI_CMD_SET_STATE_HS;
	} else {
		DSI_ERR("[%s] command state unrecognized-%s\n",
		       cmd_set_state_map[type], state);
		goto error_free_mem;
	}

	return rc;
error_free_mem:
	kfree(cmd->cmds);
	cmd->cmds = NULL;
error:
	return rc;

}

static int dsi_panel_parse_cmd_sets(
		struct dsi_display_mode_priv_info *priv_info,
		struct dsi_parser_utils *utils)
{
	int rc = 0;
	struct dsi_panel_cmd_set *set;
	u32 i;

	if (!priv_info) {
		DSI_ERR("invalid mode priv info\n");
		return -EINVAL;
	}

	for (i = DSI_CMD_SET_PRE_ON; i < DSI_CMD_SET_MAX; i++) {
		set = &priv_info->cmd_sets[i];
		set->type = i;
		set->count = 0;

		if (i == DSI_CMD_SET_PPS) {
			rc = dsi_panel_alloc_cmd_packets(set, 1);
			if (rc)
				DSI_ERR("failed to allocate cmd set %d, rc = %d\n",
					i, rc);
			set->state = DSI_CMD_SET_STATE_LP;
		} else {
			rc = dsi_panel_parse_cmd_sets_sub(set, i, utils);
			if (rc)
				DSI_DEBUG("failed to parse set %d\n", i);
		}
	}

	rc = 0;
	return rc;
}

static int dsi_panel_parse_reset_sequence(struct dsi_panel *panel)
{
	int rc = 0;
	int i;
	u32 length = 0;
	u32 count = 0;
	u32 size = 0;
	u32 *arr_32 = NULL;
	const u32 *arr;
	struct dsi_parser_utils *utils = &panel->utils;
	struct dsi_reset_seq *seq;

	if (panel->host_config.ext_bridge_mode)
		return 0;

	arr = utils->get_property(utils->data,
			"qcom,mdss-dsi-reset-sequence", &length);
	if (!arr) {
		DSI_ERR("[%s] dsi-reset-sequence not found\n", panel->name);
		rc = -EINVAL;
		goto error;
	}
	if (length & 0x1) {
		DSI_ERR("[%s] syntax error for dsi-reset-sequence\n",
		       panel->name);
		rc = -EINVAL;
		goto error;
	}

	DSI_DEBUG("RESET SEQ LENGTH = %d\n", length);
	length = length / sizeof(u32);

	size = length * sizeof(u32);

	arr_32 = kzalloc(size, GFP_KERNEL);
	if (!arr_32) {
		rc = -ENOMEM;
		goto error;
	}

	rc = utils->read_u32_array(utils->data, "qcom,mdss-dsi-reset-sequence",
					arr_32, length);
	if (rc) {
		DSI_ERR("[%s] cannot read dso-reset-seqience\n", panel->name);
		goto error_free_arr_32;
	}

	count = length / 2;
	size = count * sizeof(*seq);
	seq = kzalloc(size, GFP_KERNEL);
	if (!seq) {
		rc = -ENOMEM;
		goto error_free_arr_32;
	}

	panel->reset_config.sequence = seq;
	panel->reset_config.count = count;

	for (i = 0; i < length; i += 2) {
		seq->level = arr_32[i];
		seq->sleep_ms = arr_32[i + 1];
		seq++;
	}


error_free_arr_32:
	kfree(arr_32);
error:
	return rc;
}

static int dsi_panel_parse_misc_features(struct dsi_panel *panel)
{
	struct dsi_parser_utils *utils = &panel->utils;
	const char *string;
	int i, rc = 0;

	panel->ulps_feature_enabled =
		utils->read_bool(utils->data, "qcom,ulps-enabled");

	DSI_DEBUG("%s: ulps feature %s\n", __func__,
		(panel->ulps_feature_enabled ? "enabled" : "disabled"));

	panel->ulps_suspend_enabled =
		utils->read_bool(utils->data, "qcom,suspend-ulps-enabled");

	DSI_DEBUG("%s: ulps during suspend feature %s\n", __func__,
		(panel->ulps_suspend_enabled ? "enabled" : "disabled"));

	panel->te_using_watchdog_timer = utils->read_bool(utils->data,
					"qcom,mdss-dsi-te-using-wd");

	panel->sync_broadcast_en = utils->read_bool(utils->data,
			"qcom,cmd-sync-wait-broadcast");

	panel->lp11_init = utils->read_bool(utils->data,
			"qcom,mdss-dsi-lp11-init");

	panel->reset_gpio_always_on = utils->read_bool(utils->data,
			"qcom,platform-reset-gpio-always-on");

	panel->spr_info.enable = false;
	panel->spr_info.pack_type = MSM_DISPLAY_SPR_TYPE_MAX;

	rc = utils->read_string(utils->data, "qcom,spr-pack-type", &string);
	if (!rc) {
		// find match for pack-type string
		for (i = 0; i < MSM_DISPLAY_SPR_TYPE_MAX; i++) {
			if (msm_spr_pack_type_str[i] &&
				(!strcmp(string, msm_spr_pack_type_str[i]))) {
				panel->spr_info.enable = true;
				panel->spr_info.pack_type = i;
				break;
			}
		}
	}

	pr_debug("%s source side spr packing, pack-type %s\n",
		panel->spr_info.enable ? "enable" : "disable",
		panel->spr_info.enable ?
		msm_spr_pack_type_str[panel->spr_info.pack_type] : "none");

	return 0;
}

static int dsi_panel_parse_wd_jitter_config(struct dsi_display_mode_priv_info *priv_info,
		struct dsi_parser_utils *utils, u32 *jitter)
{
	int rc = 0;
	struct msm_display_wd_jitter_config *wd_jitter = &priv_info->wd_jitter;
	u32 ltj[DEFAULT_PANEL_JITTER_ARRAY_SIZE] = {0, 1};
	u32 ltj_time = 0;
	const u32 max_ltj = 10;

	if (!(utils->read_bool(utils->data, "qcom,dsi-wd-jitter-enable"))) {
		priv_info->panel_jitter_numer = DEFAULT_PANEL_JITTER_NUMERATOR;
		priv_info->panel_jitter_denom = DEFAULT_PANEL_JITTER_DENOMINATOR;
		return 0;
	}

	rc = utils->read_u32_array(utils->data, "qcom,dsi-wd-ltj-max-jitter", ltj,
			DEFAULT_PANEL_JITTER_ARRAY_SIZE);
	rc |= utils->read_u32(utils->data, "qcom,dsi-wd-ltj-time-sec", &ltj_time);
	if (rc || !ltj[1] || !ltj_time || (ltj[0] / ltj[1] >= max_ltj)) {
		DSI_DEBUG("No valid long term jitter defined\n");
		priv_info->panel_jitter_numer = DEFAULT_PANEL_JITTER_NUMERATOR;
		priv_info->panel_jitter_denom = DEFAULT_PANEL_JITTER_DENOMINATOR;
		rc = -EINVAL;
	} else {
		wd_jitter->ltj_max_numer = ltj[0];
		wd_jitter->ltj_max_denom = ltj[1];
		wd_jitter->ltj_time_sec = ltj_time;
		wd_jitter->jitter_type = MSM_DISPLAY_WD_LTJ_JITTER;
	}

	if (jitter[0] && jitter[1]) {
		if (jitter[0] / jitter[1] > MAX_PANEL_JITTER) {
			wd_jitter->inst_jitter_numer = DEFAULT_PANEL_JITTER_NUMERATOR;
			wd_jitter->inst_jitter_denom = DEFAULT_PANEL_JITTER_DENOMINATOR;
		} else {
			wd_jitter->inst_jitter_numer = jitter[0];
			wd_jitter->inst_jitter_denom = jitter[1];
		}
		wd_jitter->jitter_type |= MSM_DISPLAY_WD_INSTANTANEOUS_JITTER;
	} else if (rc) {
		wd_jitter->inst_jitter_numer = DEFAULT_PANEL_JITTER_NUMERATOR;
		wd_jitter->inst_jitter_denom = DEFAULT_PANEL_JITTER_DENOMINATOR;
		wd_jitter->jitter_type |= MSM_DISPLAY_WD_INSTANTANEOUS_JITTER;
	}

	priv_info->panel_jitter_numer = rc ?
			wd_jitter->inst_jitter_numer : wd_jitter->ltj_max_numer;
	priv_info->panel_jitter_denom = rc ?
			wd_jitter->inst_jitter_denom : wd_jitter->ltj_max_denom;

	return 0;
}

static int dsi_panel_parse_jitter_config(
				struct dsi_display_mode *mode,
				struct dsi_parser_utils *utils)
{
	int rc;
	struct dsi_display_mode_priv_info *priv_info;
	struct dsi_panel *panel;
	u32 jitter[DEFAULT_PANEL_JITTER_ARRAY_SIZE] = {0, 0};
	u64 jitter_val = 0;

	priv_info = mode->priv_info;
	panel = container_of(utils, struct dsi_panel, utils);

	rc = utils->read_u32_array(utils->data, "qcom,mdss-dsi-panel-jitter",
				jitter, DEFAULT_PANEL_JITTER_ARRAY_SIZE);
	if (rc) {
		DSI_DEBUG("panel jitter not defined rc=%d\n", rc);
	} else {
		jitter_val = jitter[0];
		jitter_val = div_u64(jitter_val, jitter[1]);
	}

	if (panel->te_using_watchdog_timer) {
		dsi_panel_parse_wd_jitter_config(priv_info, utils, jitter);
	} else if (rc || !jitter_val || (jitter_val > MAX_PANEL_JITTER)) {
		priv_info->panel_jitter_numer = DEFAULT_PANEL_JITTER_NUMERATOR;
		priv_info->panel_jitter_denom = DEFAULT_PANEL_JITTER_DENOMINATOR;
	} else {
		priv_info->panel_jitter_numer = jitter[0];
		priv_info->panel_jitter_denom = jitter[1];
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-panel-prefill-lines",
				  &priv_info->panel_prefill_lines);
	if (rc) {
		DSI_DEBUG("panel prefill lines are not defined rc=%d\n", rc);
		priv_info->panel_prefill_lines = mode->timing.v_back_porch +
			mode->timing.v_sync_width + mode->timing.v_front_porch;
	} else if (priv_info->panel_prefill_lines >=
					DSI_V_TOTAL(&mode->timing)) {
		DSI_DEBUG("invalid prefill lines config=%d setting to:%d\n",
		priv_info->panel_prefill_lines, DEFAULT_PANEL_PREFILL_LINES);

		priv_info->panel_prefill_lines = DEFAULT_PANEL_PREFILL_LINES;
	}

	return 0;
}

static int dsi_panel_parse_power_cfg(struct dsi_panel *panel)
{
	int rc = 0;
	char *supply_name;

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	return 0;
#endif

	if (panel->host_config.ext_bridge_mode)
		return 0;

	if (!strcmp(panel->type, "primary"))
		supply_name = "qcom,panel-supply-entries";
	else
		supply_name = "qcom,panel-sec-supply-entries";

	rc = dsi_pwr_of_get_vreg_data(&panel->utils,
			&panel->power_info, supply_name);
	if (rc) {
		DSI_ERR("[%s] failed to parse vregs\n", panel->name);
		goto error;
	}

error:
	return rc;
}

int dsi_panel_get_io_resources(struct dsi_panel *panel,
		struct msm_io_res *io_res)
{
	struct dsi_parser_utils *utils = &panel->utils;
	struct list_head *mem_list = &io_res->mem;
	int reset_gpio;
	int rc = 0;

	reset_gpio = utils->get_named_gpio(utils->data,
					      "qcom,platform-reset-gpio", 0);
	if (gpio_is_valid(reset_gpio)) {
		rc = msm_dss_get_gpio_io_mem(reset_gpio, mem_list);
		if (rc) {
			DSI_ERR("[%s] failed to retrieve the reset gpio address\n", panel->name);
			goto end;
		}
	}

end:
	return rc;
}

static int dsi_panel_parse_gpios(struct dsi_panel *panel)
{
	int rc = 0;
	const char *data;
	struct dsi_parser_utils *utils = &panel->utils;
	char *reset_gpio_name, *mode_set_gpio_name;

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	return 0;
#endif

	if (!strcmp(panel->type, "primary")) {
		reset_gpio_name = "qcom,platform-reset-gpio";
		mode_set_gpio_name = "qcom,panel-mode-gpio";
	} else {
		reset_gpio_name = "qcom,platform-sec-reset-gpio";
		mode_set_gpio_name = "qcom,panel-sec-mode-gpio";
	}

	panel->reset_config.reset_gpio = utils->get_named_gpio(utils->data,
					      reset_gpio_name, 0);
	if (!gpio_is_valid(panel->reset_config.reset_gpio) &&
		!panel->host_config.ext_bridge_mode) {
		DSI_DEBUG("[%s] reset gpio not set, rc=%d\n", panel->name,
			panel->reset_config.reset_gpio);
	}

	panel->reset_config.disp_en_gpio = utils->get_named_gpio(utils->data,
						"qcom,5v-boost-gpio",
						0);
	if (!gpio_is_valid(panel->reset_config.disp_en_gpio)) {
		DSI_DEBUG("[%s] 5v-boot-gpio is not set, rc=%d\n",
			 panel->name, rc);
		panel->reset_config.disp_en_gpio =
				utils->get_named_gpio(utils->data,
					"qcom,platform-en-gpio", 0);
		if (!gpio_is_valid(panel->reset_config.disp_en_gpio)) {
			DSI_DEBUG("[%s] platform-en-gpio is not set, rc=%d\n",
				 panel->name, rc);
		}
	}

	panel->reset_config.lcd_mode_sel_gpio = utils->get_named_gpio(
		utils->data, mode_set_gpio_name, 0);
	if (!gpio_is_valid(panel->reset_config.lcd_mode_sel_gpio))
		DSI_DEBUG("mode gpio not specified\n");

	DSI_DEBUG("mode gpio=%d\n", panel->reset_config.lcd_mode_sel_gpio);

	data = utils->get_property(utils->data,
		"qcom,mdss-dsi-mode-sel-gpio-state", NULL);
	if (data) {
		if (!strcmp(data, "single_port"))
			panel->reset_config.mode_sel_state =
				MODE_SEL_SINGLE_PORT;
		else if (!strcmp(data, "dual_port"))
			panel->reset_config.mode_sel_state =
				MODE_SEL_DUAL_PORT;
		else if (!strcmp(data, "high"))
			panel->reset_config.mode_sel_state =
				MODE_GPIO_HIGH;
		else if (!strcmp(data, "low"))
			panel->reset_config.mode_sel_state =
				MODE_GPIO_LOW;
	} else {
		/* Set default mode as SPLIT mode */
		panel->reset_config.mode_sel_state = MODE_SEL_DUAL_PORT;
	}

	/* TODO:  release memory */
	rc = dsi_panel_parse_reset_sequence(panel);
	if (rc) {
		DSI_ERR("[%s] failed to parse reset sequence, rc=%d\n",
		       panel->name, rc);
		goto error;
	}

	panel->panel_test_gpio = utils->get_named_gpio(utils->data,
					"qcom,mdss-dsi-panel-test-pin",
					0);
	if (!gpio_is_valid(panel->panel_test_gpio))
		DSI_DEBUG("%s:%d panel test gpio not specified\n", __func__,
			 __LINE__);

error:
	return rc;
}

static int dsi_panel_parse_bl_pwm_config(struct dsi_panel *panel)
{
	int rc = 0;
	u32 val;
	struct dsi_backlight_config *config = &panel->bl_config;
	struct dsi_parser_utils *utils = &panel->utils;

	rc = utils->read_u32(utils->data, "qcom,bl-pmic-pwm-period-usecs",
				  &val);
	if (rc) {
		DSI_ERR("bl-pmic-pwm-period-usecs is not defined, rc=%d\n", rc);
		goto error;
	}
	config->pwm_period_usecs = val;

error:
	return rc;
}

static int dsi_panel_parse_bl_config(struct dsi_panel *panel)
{
	int rc = 0;
	u32 val = 0;
	const char *bl_type = NULL;
	const char *data = NULL;
	const char *state = NULL;
	struct dsi_parser_utils *utils = &panel->utils;
	char *bl_name = NULL;

	if (!strcmp(panel->type, "primary"))
		bl_name = "qcom,mdss-dsi-bl-pmic-control-type";
	else
		bl_name = "qcom,mdss-dsi-sec-bl-pmic-control-type";

	bl_type = utils->get_property(utils->data, bl_name, NULL);
	if (!bl_type) {
		panel->bl_config.type = DSI_BACKLIGHT_UNKNOWN;
	} else if (!strcmp(bl_type, "bl_ctrl_pwm")) {
		panel->bl_config.type = DSI_BACKLIGHT_PWM;
	} else if (!strcmp(bl_type, "bl_ctrl_wled")) {
		panel->bl_config.type = DSI_BACKLIGHT_WLED;
	} else if (!strcmp(bl_type, "bl_ctrl_dcs")) {
		panel->bl_config.type = DSI_BACKLIGHT_DCS;
	} else if (!strcmp(bl_type, "bl_ctrl_external")) {
		panel->bl_config.type = DSI_BACKLIGHT_EXTERNAL;
	} else {
		DSI_DEBUG("[%s] bl-pmic-control-type unknown-%s\n",
			 panel->name, bl_type);
		panel->bl_config.type = DSI_BACKLIGHT_UNKNOWN;
	}

	data = utils->get_property(utils->data, "qcom,bl-update-flag", NULL);
	if (!data) {
		panel->bl_config.bl_update = BL_UPDATE_NONE;
	} else if (!strcmp(data, "delay_until_first_frame")) {
		panel->bl_config.bl_update = BL_UPDATE_DELAY_UNTIL_FIRST_FRAME;
	} else {
		DSI_DEBUG("[%s] No valid bl-update-flag: %s\n",
						panel->name, data);
		panel->bl_config.bl_update = BL_UPDATE_NONE;
	}

	panel->bl_config.bl_scale = MAX_BL_SCALE_LEVEL;
	panel->bl_config.bl_scale_sv = MAX_SV_BL_SCALE_LEVEL;
	panel->bl_config.dimming_min_bl = 0;
	panel->bl_config.dimming_status = DIMMING_ENABLE;
	panel->bl_config.user_disable_notification = false;

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-bl-min-level", &val);
	if (rc) {
		DSI_DEBUG("[%s] bl-min-level unspecified, defaulting to zero\n",
			 panel->name);
		panel->bl_config.bl_min_level = 0;
	} else {
		panel->bl_config.bl_min_level = val;
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-bl-max-level", &val);
	if (rc) {
		DSI_DEBUG("[%s] bl-max-level unspecified, defaulting to max level\n",
			 panel->name);
		panel->bl_config.bl_max_level = MAX_BL_LEVEL;
	} else {
		panel->bl_config.bl_max_level = val;
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-brightness-max-level",
		&val);
	if (rc) {
		DSI_DEBUG("[%s] brigheness-max-level unspecified, defaulting to 255\n",
			 panel->name);
		panel->bl_config.brightness_max_level = 255;
		rc = 0;
	} else {
		panel->bl_config.brightness_max_level = val;
	}

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	rc = utils->read_u32(utils->data, "qcom,mdss-brightness-default-level",
		&val);
	if (rc) {
		pr_debug("[%s] brigheness-default-level unspecified, defaulting to 255\n",
			 panel->name);
		panel->bl_config.bl_level = 255;
	} else {
		panel->bl_config.bl_level = val;
	}
#endif

	panel->bl_config.bl_inverted_dbv = utils->read_bool(utils->data,
		"qcom,mdss-dsi-bl-inverted-dbv");

	state = utils->get_property(utils->data, "qcom,bl-dsc-cmd-state", NULL);
	if (!state || !strcmp(state, "dsi_hs_mode"))
		panel->bl_config.lp_mode = false;
	else if (!strcmp(state, "dsi_lp_mode"))
		panel->bl_config.lp_mode = true;
	else
		DSI_ERR("bl-dsc-cmd-state command state unrecognized-%s\n",
			state);

	if (panel->bl_config.type == DSI_BACKLIGHT_PWM) {
		rc = dsi_panel_parse_bl_pwm_config(panel);
		if (rc) {
			DSI_ERR("[%s] failed to parse pwm config, rc=%d\n",
			       panel->name, rc);
			goto error;
		}
	}

	panel->bl_config.en_gpio = utils->get_named_gpio(utils->data,
					      "qcom,platform-bklight-en-gpio",
					      0);
	if (!gpio_is_valid(panel->bl_config.en_gpio)) {
		if (panel->bl_config.en_gpio == -EPROBE_DEFER) {
			DSI_DEBUG("[%s] failed to get bklt gpio, rc=%d\n",
					panel->name, rc);
			rc = -EPROBE_DEFER;
			goto error;
		} else {
			DSI_DEBUG("[%s] failed to get bklt gpio, rc=%d\n",
					 panel->name, rc);
			rc = 0;
			goto error;
		}
	}

error:
	return rc;
}

static int dsi_panel_parse_phy_timing(struct dsi_display_mode *mode,
		struct dsi_parser_utils *utils)
{
	const char *data;
	u32 len, i;
	int rc = 0;
	struct dsi_display_mode_priv_info *priv_info;
	u64 pixel_clk_khz;

	if (!mode || !mode->priv_info)
		return -EINVAL;

	priv_info = mode->priv_info;

	data = utils->get_property(utils->data,
			"qcom,mdss-dsi-panel-phy-timings", &len);
	if (!data) {
		DSI_DEBUG("Unable to read Phy timing settings\n");
	} else {
		priv_info->phy_timing_val =
			kzalloc((sizeof(u32) * len), GFP_KERNEL);
		if (!priv_info->phy_timing_val)
			return -EINVAL;

		for (i = 0; i < len; i++)
			priv_info->phy_timing_val[i] = data[i];

		priv_info->phy_timing_len = len;
	}

	if (mode->panel_mode_caps & DSI_OP_VIDEO_MODE) {
		/*
		 *  For command mode we update the pclk as part of
		 *  function dsi_panel_calc_dsi_transfer_time( )
		 *  as we set it based on dsi clock or mdp transfer time.
		 */
		pixel_clk_khz = (dsi_h_total_dce(&mode->timing) *
				DSI_V_TOTAL(&mode->timing) *
				mode->timing.refresh_rate);
		do_div(pixel_clk_khz, 1000);
		mode->pixel_clk_khz = pixel_clk_khz;
	}

	return rc;
}

static int dsi_panel_parse_dsc_params(struct dsi_display_mode *mode,
				struct dsi_parser_utils *utils)
{
	u32 data;
	int rc = -EINVAL;
	int intf_width;
	const char *compression;
	struct dsi_display_mode_priv_info *priv_info;

	if (!mode || !mode->priv_info)
		return -EINVAL;

	priv_info = mode->priv_info;

	priv_info->dsc_enabled = false;
	compression = utils->get_property(utils->data,
			"qcom,compression-mode", NULL);
	if (compression && !strcmp(compression, "dsc"))
		priv_info->dsc_enabled = true;

	if (!priv_info->dsc_enabled) {
		DSI_DEBUG("dsc compression is not enabled for the mode\n");
		return 0;
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-dsc-version", &data);
	if (rc) {
		priv_info->dsc.config.dsc_version_major = 0x1;
		priv_info->dsc.config.dsc_version_minor = 0x1;
		rc = 0;
	} else {
		/* BITS[0..3] provides minor version and BITS[4..7] provide
		 * major version information
		 */
		priv_info->dsc.config.dsc_version_major = (data >> 4) & 0x0F;
		priv_info->dsc.config.dsc_version_minor = data & 0x0F;
		if ((priv_info->dsc.config.dsc_version_major != 0x1) ||
				((priv_info->dsc.config.dsc_version_minor
				  != 0x1) &&
				 (priv_info->dsc.config.dsc_version_minor
				  != 0x2))) {
			DSI_ERR("%s:unsupported major:%d minor:%d version\n",
					__func__,
					priv_info->dsc.config.dsc_version_major,
					priv_info->dsc.config.dsc_version_minor
					);
			rc = -EINVAL;
			goto error;
		}
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-dsc-scr-version", &data);
	if (rc) {
		priv_info->dsc.scr_rev = 0x0;
		rc = 0;
	} else {
		priv_info->dsc.scr_rev = data & 0xff;
		/* only one scr rev supported */
		if (priv_info->dsc.scr_rev > 0x1) {
			DSI_ERR("%s: DSC scr version:%d not supported\n",
					__func__, priv_info->dsc.scr_rev);
			rc = -EINVAL;
			goto error;
		}
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-dsc-slice-height", &data);
	if (rc) {
		DSI_ERR("failed to parse qcom,mdss-dsc-slice-height\n");
		goto error;
	}
	priv_info->dsc.config.slice_height = data;

	rc = utils->read_u32(utils->data, "qcom,mdss-dsc-slice-width", &data);
	if (rc) {
		DSI_ERR("failed to parse qcom,mdss-dsc-slice-width\n");
		goto error;
	}
	priv_info->dsc.config.slice_width = data;

	intf_width = mode->timing.h_active;
	if (intf_width % priv_info->dsc.config.slice_width) {
		DSI_ERR("invalid slice width for the intf width:%d slice width:%d\n",
			intf_width, priv_info->dsc.config.slice_width);
		rc = -EINVAL;
		goto error;
	}

	priv_info->dsc.config.pic_width = mode->timing.h_active;
	priv_info->dsc.config.pic_height = mode->timing.v_active;

	rc = utils->read_u32(utils->data, "qcom,mdss-dsc-slice-per-pkt", &data);
	if (rc) {
		DSI_ERR("failed to parse qcom,mdss-dsc-slice-per-pkt\n");
		goto error;
	} else if (!data || (data > 2)) {
		DSI_ERR("invalid dsc slice-per-pkt:%d\n", data);
		goto error;
	}
	priv_info->dsc.slice_per_pkt = data;

	rc = utils->read_u32(utils->data, "qcom,mdss-dsc-bit-per-component",
		&data);
	if (rc) {
		DSI_ERR("failed to parse qcom,mdss-dsc-bit-per-component\n");
		goto error;
	}
	priv_info->dsc.config.bits_per_component = data;

	rc = utils->read_u32(utils->data, "qcom,mdss-pps-delay-ms", &data);
	if (rc) {
		DSI_DEBUG("pps-delay-ms not specified, defaulting to 0\n");
		data = 0;
	}
	priv_info->dsc.pps_delay_ms = data;

	rc = utils->read_u32(utils->data, "qcom,mdss-dsc-bit-per-pixel",
			&data);
	if (rc) {
		DSI_ERR("failed to parse qcom,mdss-dsc-bit-per-pixel\n");
		goto error;
	}
	priv_info->dsc.config.bits_per_pixel = data << 4;

	rc = utils->read_u32(utils->data, "qcom,src-chroma-format",
			&data);
	if (rc) {
		DSI_DEBUG("failed to parse qcom,src-chroma-format\n");
		rc = 0;
		data = MSM_CHROMA_444;
	} else if (data == MSM_CHROMA_422) {
		priv_info->dsc.config.native_422 = 1;
	} else if (data == MSM_CHROMA_420) {
		priv_info->dsc.config.native_420 = 1;
	}

	priv_info->dsc.chroma_format = data;

	rc = utils->read_u32(utils->data, "qcom,src-color-space",
			&data);
	if (rc) {
		DSI_DEBUG("failed to parse qcom,src-color-space\n");
		rc = 0;
		data = MSM_RGB;
	}

	priv_info->dsc.source_color_space = data;

	priv_info->dsc.config.block_pred_enable = utils->read_bool(utils->data,
		"qcom,mdss-dsc-block-prediction-enable");

	priv_info->dsc.config.slice_count = DIV_ROUND_UP(intf_width,
		priv_info->dsc.config.slice_width);

	rc = sde_dsc_populate_dsc_config(&priv_info->dsc.config,
			priv_info->dsc.scr_rev);
	if (rc) {
		DSI_DEBUG("failed populating dsc params\n");
		rc = -EINVAL;
		goto error;
	}

	rc = sde_dsc_populate_dsc_private_params(&priv_info->dsc, intf_width,
			priv_info->widebus_support);
	if (rc) {
		DSI_DEBUG("failed populating other dsc params\n");
		rc = -EINVAL;
		goto error;
	}

	priv_info->pclk_scale.numer =
			priv_info->dsc.config.bits_per_pixel >> 4;
	priv_info->pclk_scale.denom = msm_get_src_bpc(
			priv_info->dsc.chroma_format,
			priv_info->dsc.config.bits_per_component);

	mode->timing.dsc_enabled = true;
	mode->timing.dsc = &priv_info->dsc;
	mode->timing.pclk_scale = priv_info->pclk_scale;

error:
	return rc;
}

static int dsi_panel_parse_vdc_params(struct dsi_display_mode *mode,
	struct dsi_parser_utils *utils, int traffic_mode)
{
	u32 data;
	int rc = -EINVAL;
	const char *compression;
	struct dsi_display_mode_priv_info *priv_info;
	int intf_width;

	if (!mode || !mode->priv_info)
		return -EINVAL;

	priv_info = mode->priv_info;

	priv_info->vdc_enabled = false;
	compression = utils->get_property(utils->data,
			"qcom,compression-mode", NULL);
	if (compression && !strcmp(compression, "vdc"))
		priv_info->vdc_enabled = true;

	if (!priv_info->vdc_enabled) {
		DSI_DEBUG("vdc compression is not enabled for the mode\n");
		return 0;
	}

	priv_info->vdc.traffic_mode = traffic_mode;

	rc = utils->read_u32(utils->data, "qcom,vdc-version", &data);
	if (rc) {
		priv_info->vdc.version_major = 0x1;
		priv_info->vdc.version_minor = 0x2;
		priv_info->vdc.version_release = 0x0;
		rc = 0;
	} else {
		/* BITS[0..3] provides minor version and BITS[4..7] provide
		 * major version information
		 */
		priv_info->vdc.version_major = (data >> 4) & 0x0F;
		priv_info->vdc.version_minor = data & 0x0F;
		if ((priv_info->vdc.version_major != 0x1) &&
				((priv_info->vdc.version_minor
				  != 0x2))) {
			DSI_ERR("%s:unsupported major:%d minor:%d version\n",
					__func__,
					priv_info->vdc.version_major,
					priv_info->vdc.version_minor
					);
			rc = -EINVAL;
			goto error;
		}
	}

	rc = utils->read_u32(utils->data, "qcom,vdc-version-release", &data);
	if (rc) {
		priv_info->vdc.version_release = 0x0;
		rc = 0;
	} else {
		priv_info->vdc.version_release = data & 0xff;
		/* only one release version is supported */
		if (priv_info->vdc.version_release != 0x0) {
			DSI_ERR("unsupported vdc release version %d\n",
					priv_info->vdc.version_release);
			rc = -EINVAL;
			goto error;
		}
	}

	DSI_INFO("vdc major: 0x%x minor : 0x%x release : 0x%x\n",
			priv_info->vdc.version_major,
			priv_info->vdc.version_minor,
			priv_info->vdc.version_release);

	rc = utils->read_u32(utils->data, "qcom,vdc-slice-height", &data);
	if (rc) {
		DSI_ERR("failed to parse qcom,vdc-slice-height\n");
		goto error;
	}
	priv_info->vdc.slice_height = data;

	/* slice height should be atleast 16 lines */
	if (priv_info->vdc.slice_height < 16) {
		DSI_ERR("invalid slice height %d\n",
			priv_info->vdc.slice_height);
		rc = -EINVAL;
		goto error;
	}

	rc = utils->read_u32(utils->data, "qcom,vdc-slice-width", &data);
	if (rc) {
		DSI_ERR("failed to parse qcom,vdc-slice-width\n");
		goto error;
	}

	priv_info->vdc.slice_width = data;

	/*
	 * slide-width should be multiple of 8
	 * slice-width should be atlease 64 pixels
	 */
	if ((priv_info->vdc.slice_width & 7) ||
		(priv_info->vdc.slice_width < 64)) {
		DSI_ERR("invalid slice width:%d\n", priv_info->vdc.slice_width);
		rc = -EINVAL;
		goto error;
	}

	rc = utils->read_u32(utils->data, "qcom,vdc-slice-per-pkt", &data);
	if (rc) {
		DSI_ERR("failed to parse qcom,vdc-slice-per-pkt\n");
		goto error;
	} else if (!data || (data > 2)) {
		DSI_ERR("invalid vdc slice-per-pkt:%d\n", data);
		rc = -EINVAL;
		goto error;
	}

	intf_width = mode->timing.h_active;
	priv_info->vdc.slice_per_pkt = data;

	priv_info->vdc.frame_width = mode->timing.h_active;
	priv_info->vdc.frame_height = mode->timing.v_active;

	rc = utils->read_u32(utils->data, "qcom,vdc-bit-per-component",
		&data);
	if (rc) {
		DSI_ERR("failed to parse qcom,vdc-bit-per-component\n");
		goto error;
	}
	priv_info->vdc.bits_per_component = data;

	rc = utils->read_u32(utils->data, "qcom,mdss-pps-delay-ms", &data);
	if (rc) {
		DSI_DEBUG("pps-delay-ms not specified, defaulting to 0\n");
		data = 0;
	}
	priv_info->vdc.pps_delay_ms = data;

	rc = utils->read_u32(utils->data, "qcom,vdc-bit-per-pixel",
			&data);
	if (rc) {
		DSI_ERR("failed to parse qcom,vdc-bit-per-pixel\n");
		goto error;
	}
	priv_info->vdc.bits_per_pixel = data << 4;

	rc = utils->read_u32(utils->data, "qcom,src-chroma-format",
			&data);
	if (rc) {
		DSI_DEBUG("failed to parse qcom,src-chroma-format\n");
		rc = 0;
		data = MSM_CHROMA_444;
	}
	priv_info->vdc.chroma_format = data;

	rc = utils->read_u32(utils->data, "qcom,src-color-space",
			&data);
	if (rc) {
		DSI_DEBUG("failed to parse qcom,src-color-space\n");
		rc = 0;
		data = MSM_RGB;
	}
	priv_info->vdc.source_color_space = data;

	rc = sde_vdc_populate_config(&priv_info->vdc,
		intf_width, traffic_mode);
	if (rc) {
		DSI_DEBUG("failed populating vdc config\n");
		rc = -EINVAL;
		goto error;
	}

	priv_info->pclk_scale.numer =
			priv_info->vdc.bits_per_pixel >> 4;
	priv_info->pclk_scale.denom = msm_get_src_bpc(
			priv_info->vdc.chroma_format,
			priv_info->vdc.bits_per_component);

	mode->timing.vdc_enabled = true;
	mode->timing.vdc = &priv_info->vdc;
	mode->timing.pclk_scale = priv_info->pclk_scale;

error:
	return rc;
}

static int dsi_panel_parse_hdr_config(struct dsi_panel *panel)
{
	int rc = 0;
	struct drm_panel_hdr_properties *hdr_prop;
	struct dsi_parser_utils *utils = &panel->utils;

	hdr_prop = &panel->hdr_props;
	hdr_prop->hdr_enabled = utils->read_bool(utils->data,
		"qcom,mdss-dsi-panel-hdr-enabled");

	if (hdr_prop->hdr_enabled) {
		rc = utils->read_u32_array(utils->data,
				"qcom,mdss-dsi-panel-hdr-color-primaries",
				hdr_prop->display_primaries,
				DISPLAY_PRIMARIES_MAX);
		if (rc) {
			DSI_ERR("%s:%d, Unable to read color primaries,rc:%u\n",
					__func__, __LINE__, rc);
			hdr_prop->hdr_enabled = false;
			return rc;
		}

		rc = utils->read_u32(utils->data,
			"qcom,mdss-dsi-panel-peak-brightness",
			&(hdr_prop->peak_brightness));
		if (rc) {
			DSI_ERR("%s:%d, Unable to read hdr brightness, rc:%u\n",
				__func__, __LINE__, rc);
			hdr_prop->hdr_enabled = false;
			return rc;
		}

		rc = utils->read_u32(utils->data,
			"qcom,mdss-dsi-panel-blackness-level",
			&(hdr_prop->blackness_level));
		if (rc) {
			DSI_ERR("%s:%d, Unable to read hdr brightness, rc:%u\n",
				__func__, __LINE__, rc);
			hdr_prop->hdr_enabled = false;
			return rc;
		}
	}
	return 0;
}

static int dsi_panel_parse_topology(
		struct dsi_display_mode_priv_info *priv_info,
		struct dsi_parser_utils *utils,
		int topology_override)
{
	struct msm_display_topology *topology;
	u32 top_count, top_sel, *array = NULL;
	int i, len = 0;
	int rc = -EINVAL;

	len = utils->count_u32_elems(utils->data, "qcom,display-topology");
	if (len <= 0 || len % TOPOLOGY_SET_LEN ||
			len > (TOPOLOGY_SET_LEN * MAX_TOPOLOGY)) {
		DSI_ERR("invalid topology list for the panel, rc = %d\n", rc);
		return rc;
	}

	top_count = len / TOPOLOGY_SET_LEN;

	array = kcalloc(len, sizeof(u32), GFP_KERNEL);
	if (!array)
		return -ENOMEM;

	rc = utils->read_u32_array(utils->data,
			"qcom,display-topology", array, len);
	if (rc) {
		DSI_ERR("unable to read the display topologies, rc = %d\n", rc);
		goto read_fail;
	}

	topology = kcalloc(top_count, sizeof(*topology), GFP_KERNEL);
	if (!topology) {
		rc = -ENOMEM;
		goto read_fail;
	}

	for (i = 0; i < top_count; i++) {
		struct msm_display_topology *top = &topology[i];

		top->num_lm = array[i * TOPOLOGY_SET_LEN];
		top->num_enc = array[i * TOPOLOGY_SET_LEN + 1];
		top->num_intf = array[i * TOPOLOGY_SET_LEN + 2];
	}

	if (topology_override >= 0 && topology_override < top_count) {
		DSI_INFO("override topology: cfg:%d lm:%d comp_enc:%d intf:%d\n",
			topology_override,
			topology[topology_override].num_lm,
			topology[topology_override].num_enc,
			topology[topology_override].num_intf);
		top_sel = topology_override;
		goto parse_done;
	}

	rc = utils->read_u32(utils->data,
			"qcom,default-topology-index", &top_sel);
	if (rc) {
		DSI_ERR("no default topology selected, rc = %d\n", rc);
		goto parse_fail;
	}

	if (top_sel >= top_count) {
		rc = -EINVAL;
		DSI_ERR("default topology is specified is not valid, rc = %d\n",
			rc);
		goto parse_fail;
	}

parse_done:
	if (!(priv_info->dsc_enabled || priv_info->vdc_enabled) !=
			!topology[top_sel].num_enc) {
		DSI_ERR("topology and compression info mismatch dsc:%d vdc:%d num_enc:%d\n",
			priv_info->dsc_enabled, priv_info->vdc_enabled,
			topology[top_sel].num_enc);
		goto parse_fail;
	}

	if (priv_info->dsc_enabled)
		topology[top_sel].comp_type = MSM_DISPLAY_COMPRESSION_DSC;
	else if (priv_info->vdc_enabled)
		topology[top_sel].comp_type = MSM_DISPLAY_COMPRESSION_VDC;

	DSI_INFO("default topology: lm: %d comp_enc:%d intf: %d\n",
		topology[top_sel].num_lm,
		topology[top_sel].num_enc,
		topology[top_sel].num_intf);

	memcpy(&priv_info->topology, &topology[top_sel],
		sizeof(struct msm_display_topology));
parse_fail:
	kfree(topology);
read_fail:
	kfree(array);

	return rc;
}

static int dsi_panel_parse_roi_alignment(struct dsi_parser_utils *utils,
					 struct msm_roi_alignment *align)
{
	int len = 0, rc = 0;
	u32 value[6];
	struct property *data;

	if (!align)
		return -EINVAL;

	memset(align, 0, sizeof(*align));

	data = utils->find_property(utils->data,
			"qcom,panel-roi-alignment", &len);
	len /= sizeof(u32);
	if (!data) {
		DSI_ERR("panel roi alignment not found\n");
		rc = -EINVAL;
	} else if (len != 6) {
		DSI_ERR("incorrect roi alignment len %d\n", len);
		rc = -EINVAL;
	} else {
		rc = utils->read_u32_array(utils->data,
				"qcom,panel-roi-alignment", value, len);
		if (rc)
			DSI_DEBUG("error reading panel roi alignment values\n");
		else {
			align->xstart_pix_align = value[0];
			align->ystart_pix_align = value[1];
			align->width_pix_align = value[2];
			align->height_pix_align = value[3];
			align->min_width = value[4];
			align->min_height = value[5];
		}

		DSI_INFO("roi alignment: [%d, %d, %d, %d, %d, %d]\n",
			align->xstart_pix_align,
			align->width_pix_align,
			align->ystart_pix_align,
			align->height_pix_align,
			align->min_width,
			align->min_height);
	}

	return rc;
}

static int dsi_panel_parse_partial_update_caps(struct dsi_display_mode *mode,
				struct dsi_parser_utils *utils)
{
	struct msm_roi_caps *roi_caps = NULL;
	const char *data;
	int rc = 0;

	if (!mode || !mode->priv_info) {
		DSI_ERR("invalid arguments\n");
		return -EINVAL;
	}

	roi_caps = &mode->priv_info->roi_caps;

	memset(roi_caps, 0, sizeof(*roi_caps));

	data = utils->get_property(utils->data,
		"qcom,partial-update-enabled", NULL);
	if (data) {
		if (!strcmp(data, "dual_roi"))
			roi_caps->num_roi = 2;
		else if (!strcmp(data, "single_roi"))
			roi_caps->num_roi = 1;
		else {
			DSI_INFO(
			"invalid value for qcom,partial-update-enabled: %s\n",
			data);
			return 0;
		}
	} else {
		DSI_DEBUG("partial update disabled as the property is not set\n");
		return 0;
	}

	roi_caps->merge_rois = utils->read_bool(utils->data,
			"qcom,partial-update-roi-merge");

	roi_caps->enabled = roi_caps->num_roi > 0;

	if (roi_caps->enabled)
		rc = dsi_panel_parse_roi_alignment(utils,
				&roi_caps->align);

	if (rc)
		memset(roi_caps, 0, sizeof(*roi_caps));
	else if (mode->priv_info->dsc_enabled &&
			((roi_caps->align.min_width % mode->priv_info->dsc.config.slice_width) ||
			(roi_caps->align.min_height % mode->priv_info->dsc.config.slice_height))) {
		memset(roi_caps, 0, sizeof(*roi_caps));
		DSI_ERR("panel roi can't match DSC slice settings,disable partial update\n");
	}

	DSI_DEBUG("partial update num_rois=%d enabled=%d\n", roi_caps->num_roi,
			roi_caps->enabled);

	return rc;
}

static bool dsi_panel_parse_panel_mode_caps(struct dsi_display_mode *mode,
				struct dsi_parser_utils *utils)
{
	if (!mode || !mode->priv_info) {
		DSI_ERR("invalid arguments\n");
		return false;
	}

	if (utils->read_bool(utils->data, "qcom,mdss-dsi-video-mode"))
		mode->panel_mode_caps |= DSI_OP_VIDEO_MODE;

	if (utils->read_bool(utils->data, "qcom,mdss-dsi-cmd-mode"))
		mode->panel_mode_caps |= DSI_OP_CMD_MODE;

	if (!mode->panel_mode_caps)
		return false;

	return true;
};

static int dsi_panel_parse_bpp_mode_caps(struct dsi_display_mode *mode,
				struct dsi_parser_utils *utils)
{
	int rc = 0;
	u32 bpp = 0;

	if (!mode || !mode->priv_info) {
		DSI_ERR("invalid arguments\n");
		return -EINVAL;
	}

	rc = utils->read_u32(utils->data, "qcom,mdss-dsi-bpp-mode", &bpp);
	if (rc) {
		DSI_DEBUG("bpp mode not defined in timing node, setting default 24bpp\n");
		mode->pixel_format_caps = DSI_PIXEL_FORMAT_RGB888;
		return 0;
	}

	switch(bpp) {
	case 30:
		mode->pixel_format_caps = DSI_PIXEL_FORMAT_RGB101010;
		break;
	case 24:
	default:
		mode->pixel_format_caps = DSI_PIXEL_FORMAT_RGB888;
		break;
	}

	return rc;
};

static int dsi_panel_parse_dms_info(struct dsi_panel *panel)
{
	int dms_enabled;
	const char *data;
	struct dsi_parser_utils *utils = &panel->utils;

	panel->dms_mode = DSI_DMS_MODE_DISABLED;
	dms_enabled = utils->read_bool(utils->data,
		"qcom,dynamic-mode-switch-enabled");
	if (!dms_enabled)
		return 0;

	data = utils->get_property(utils->data,
			"qcom,dynamic-mode-switch-type", NULL);
	if (data && !strcmp(data, "dynamic-resolution-switch-immediate")) {
		panel->dms_mode = DSI_DMS_MODE_RES_SWITCH_IMMEDIATE;
	} else {
		DSI_ERR("[%s] unsupported dynamic switch mode: %s\n",
							panel->name, data);
		return -EINVAL;
	}

	return 0;
};

/*
 * The length of all the valid values to be checked should not be greater
 * than the length of returned data from read command.
 */
static bool
dsi_panel_parse_esd_check_valid_params(struct dsi_panel *panel, u32 count)
{
	int i;
	struct drm_panel_esd_config *config = &panel->esd_config;

	for (i = 0; i < count; ++i) {
		if (config->status_valid_params[i] >
				config->status_cmds_rlen[i]) {
			DSI_DEBUG("ignore valid params\n");
			return false;
		}
	}

	return true;
}

static bool dsi_panel_parse_esd_status_len(struct dsi_parser_utils *utils,
	char *prop_key, u32 **target, u32 cmd_cnt)
{
	int tmp;

	if (!utils->find_property(utils->data, prop_key, &tmp))
		return false;

	tmp /= sizeof(u32);
	if (tmp != cmd_cnt) {
		DSI_ERR("request property(%d) do not match cmd count(%d)\n",
				tmp, cmd_cnt);
		return false;
	}

	*target = kcalloc(tmp, sizeof(u32), GFP_KERNEL);
	if (IS_ERR_OR_NULL(*target)) {
		DSI_ERR("Error allocating memory for property\n");
		return false;
	}

	if (utils->read_u32_array(utils->data, prop_key, *target, tmp)) {
		DSI_ERR("cannot get values from dts\n");
		kfree(*target);
		*target = NULL;
		return false;
	}

	return true;
}

static void dsi_panel_esd_config_deinit(struct drm_panel_esd_config *esd_config)
{
	kfree(esd_config->status_buf);
	kfree(esd_config->return_buf);
	kfree(esd_config->status_value);
	kfree(esd_config->status_valid_params);
	kfree(esd_config->status_cmds_rlen);
	kfree(esd_config->status_cmd.cmds);
}

int dsi_panel_parse_esd_reg_read_configs(struct dsi_panel *panel)
{
	struct drm_panel_esd_config *esd_config;
	int rc = 0;
	u32 tmp;
	u32 i, status_len, *lenp;
	struct property *data;
	struct dsi_parser_utils *utils = &panel->utils;

	if (!panel) {
		DSI_ERR("Invalid Params\n");
		return -EINVAL;
	}

	esd_config = &panel->esd_config;
	if (!esd_config)
		return -EINVAL;

	dsi_panel_parse_cmd_sets_sub(&esd_config->status_cmd,
				DSI_CMD_SET_PANEL_STATUS, utils);
	if (!esd_config->status_cmd.count) {
		DSI_ERR("panel status command parsing failed\n");
		rc = -EINVAL;
		goto error;
	}

	if (!dsi_panel_parse_esd_status_len(utils,
		"qcom,mdss-dsi-panel-status-read-length",
			&panel->esd_config.status_cmds_rlen,
				esd_config->status_cmd.count)) {
		DSI_ERR("Invalid status read length\n");
		rc = -EINVAL;
		goto error1;
	}

	if (dsi_panel_parse_esd_status_len(utils,
		"qcom,mdss-dsi-panel-status-valid-params",
			&panel->esd_config.status_valid_params,
				esd_config->status_cmd.count)) {
		if (!dsi_panel_parse_esd_check_valid_params(panel,
					esd_config->status_cmd.count)) {
			rc = -EINVAL;
			goto error2;
		}
	}

	status_len = 0;
	lenp = esd_config->status_valid_params ?: esd_config->status_cmds_rlen;
	for (i = 0; i < esd_config->status_cmd.count; ++i)
		status_len += lenp[i];

	if (!status_len) {
		rc = -EINVAL;
		goto error2;
	}

	/*
	 * Some panel may need multiple read commands to properly
	 * check panel status. Do a sanity check for proper status
	 * value which will be compared with the value read by dsi
	 * controller during ESD check. Also check if multiple read
	 * commands are there then, there should be corresponding
	 * status check values for each read command.
	 */
	data = utils->find_property(utils->data,
			"qcom,mdss-dsi-panel-status-value", &tmp);
	tmp /= sizeof(u32);
	if (!IS_ERR_OR_NULL(data) && tmp != 0 && (tmp % status_len) == 0) {
		esd_config->groups = tmp / status_len;
	} else {
		DSI_ERR("error parse panel-status-value\n");
		rc = -EINVAL;
		goto error2;
	}

	esd_config->status_value =
		kzalloc(sizeof(u32) * status_len * esd_config->groups,
			GFP_KERNEL);
	if (!esd_config->status_value) {
		rc = -ENOMEM;
		goto error2;
	}

	esd_config->return_buf = kcalloc(status_len * esd_config->groups,
			sizeof(unsigned char), GFP_KERNEL);
	if (!esd_config->return_buf) {
		rc = -ENOMEM;
		goto error3;
	}

	esd_config->status_buf = kzalloc(SZ_4K, GFP_KERNEL);
	if (!esd_config->status_buf) {
		rc = -ENOMEM;
		goto error4;
	}

	rc = utils->read_u32_array(utils->data,
		"qcom,mdss-dsi-panel-status-value",
		esd_config->status_value, esd_config->groups * status_len);
	if (rc) {
		DSI_DEBUG("error reading panel status values\n");
		memset(esd_config->status_value, 0,
				esd_config->groups * status_len);
	}

	return 0;

error4:
	kfree(esd_config->return_buf);
error3:
	kfree(esd_config->status_value);
error2:
	kfree(esd_config->status_valid_params);
	kfree(esd_config->status_cmds_rlen);
error1:
	kfree(esd_config->status_cmd.cmds);
error:
	return rc;
}

static int dsi_panel_parse_esd_config(struct dsi_panel *panel)
{
	int rc = 0;
	const char *string;
	struct drm_panel_esd_config *esd_config;
	struct dsi_parser_utils *utils = &panel->utils;
	u8 *esd_mode = NULL;

	esd_config = &panel->esd_config;
	esd_config->status_mode = ESD_MODE_MAX;
	esd_config->esd_enabled = utils->read_bool(utils->data,
		"qcom,esd-check-enabled");

	if (!esd_config->esd_enabled)
		return 0;

	rc = utils->read_string(utils->data,
			"qcom,mdss-dsi-panel-status-check-mode", &string);
	if (!rc) {
		if (!strcmp(string, "bta_check")) {
			esd_config->status_mode = ESD_MODE_SW_BTA;
		} else if (!strcmp(string, "reg_read")) {
			esd_config->status_mode = ESD_MODE_REG_READ;
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
		} else if (!strcmp(string, "irq_check")) {
			esd_config->status_mode = ESD_MODE_PANEL_IRQ;
			DSI_INFO("%s : irq_check!!\n", __func__);
#endif
		} else if (!strcmp(string, "te_signal_check")) {
			if (panel->panel_mode == DSI_OP_CMD_MODE) {
				esd_config->status_mode = ESD_MODE_PANEL_TE;
			} else {
				DSI_ERR("TE-ESD not valid for video mode\n");
				rc = -EINVAL;
				goto error;
			}
		} else {
			DSI_ERR("No valid panel-status-check-mode string\n");
			rc = -EINVAL;
			goto error;
		}
	} else {
		DSI_DEBUG("status check method not defined!\n");
		rc = -EINVAL;
		goto error;
	}

	if (panel->esd_config.status_mode == ESD_MODE_REG_READ) {
		rc = dsi_panel_parse_esd_reg_read_configs(panel);
		if (rc) {
			DSI_ERR("failed to parse esd reg read mode params, rc=%d\n",
						rc);
			goto error;
		}
		esd_mode = "register_read";
	} else if (panel->esd_config.status_mode == ESD_MODE_SW_BTA) {
		esd_mode = "bta_trigger";
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	} else if (panel->esd_config.status_mode == ESD_MODE_PANEL_IRQ) {
		esd_mode = "panel_irq";
#endif
	} else if (panel->esd_config.status_mode ==  ESD_MODE_PANEL_TE) {
		esd_mode = "te_check";
	}

	DSI_DEBUG("ESD enabled with mode: %s\n", esd_mode);

	return 0;

error:
	panel->esd_config.esd_enabled = false;
	return rc;
}

static void dsi_panel_update_util(struct dsi_panel *panel,
				  struct device_node *parser_node)
{
	struct dsi_parser_utils *utils = &panel->utils;
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	struct dsi_parser_utils *self_disp_utils = &panel->self_display_utils;
	struct dsi_parser_utils *mafpc_utils = &panel->mafpc_utils;
#endif

	if (parser_node) {
		*utils = *dsi_parser_get_parser_utils();
		utils->data = parser_node;

		DSI_DEBUG("switching to parser APIs\n");

		goto end;
	}

	*utils = *dsi_parser_get_of_utils();
	utils->data = panel->panel_of_node;
end:
	utils->node = panel->panel_of_node;

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	*self_disp_utils = *dsi_parser_get_of_utils();
	self_disp_utils->data = panel->self_display_of_node;
	self_disp_utils->node = panel->self_display_of_node;
	*mafpc_utils = *dsi_parser_get_of_utils();
	mafpc_utils->data = panel->mafpc_of_node;
	mafpc_utils->node = panel->mafpc_of_node;
#endif
}

static int dsi_panel_vm_stub(struct dsi_panel *panel)
{
	return 0;
}

static void dsi_panel_setup_vm_ops(struct dsi_panel *panel, bool trusted_vm_env)
{
	if (trusted_vm_env) {
		panel->panel_ops.pinctrl_init = dsi_panel_vm_stub;
		panel->panel_ops.gpio_request = dsi_panel_vm_stub;
		panel->panel_ops.pinctrl_deinit = dsi_panel_vm_stub;
		panel->panel_ops.gpio_release = dsi_panel_vm_stub;
		panel->panel_ops.bl_register = dsi_panel_vm_stub;
		panel->panel_ops.bl_unregister = dsi_panel_vm_stub;
		panel->panel_ops.parse_gpios = dsi_panel_vm_stub;
		panel->panel_ops.parse_power_cfg = dsi_panel_vm_stub;
		panel->panel_ops.trigger_esd_attack = dsi_panel_vm_trigger_esd_attack;
	} else {
		panel->panel_ops.pinctrl_init = dsi_panel_pinctrl_init;
		panel->panel_ops.gpio_request = dsi_panel_gpio_request;
		panel->panel_ops.pinctrl_deinit = dsi_panel_pinctrl_deinit;
		panel->panel_ops.gpio_release = dsi_panel_gpio_release;
		panel->panel_ops.bl_register = dsi_panel_bl_register;
		panel->panel_ops.bl_unregister = dsi_panel_bl_unregister;
		panel->panel_ops.parse_gpios = dsi_panel_parse_gpios;
		panel->panel_ops.parse_power_cfg = dsi_panel_parse_power_cfg;
		panel->panel_ops.trigger_esd_attack = dsi_panel_trigger_esd_attack;
	}
}

struct dsi_panel *dsi_panel_get(struct device *parent,
				struct device_node *of_node,
				struct device_node *parser_node,
				const char *type,
				int topology_override,
				bool trusted_vm_env)
{
	struct dsi_panel *panel;
	struct dsi_parser_utils *utils;
	const char *panel_physical_type;
	int rc = 0;
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	struct device_node *self_display_node = of_parse_phandle(of_node, "ss,self_display", 0);
	struct device_node *mafpc_node = of_parse_phandle(of_node, "ss,mafpc", 0);
#endif

	panel = kzalloc(sizeof(*panel), GFP_KERNEL);
	if (!panel)
		return ERR_PTR(-ENOMEM);

	dsi_panel_setup_vm_ops(panel, trusted_vm_env);

	panel->panel_of_node = of_node;
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	panel->self_display_of_node = self_display_node;
	panel->mafpc_of_node = mafpc_node;
#endif
	panel->parent = parent;
	panel->type = type;

	dsi_panel_update_util(panel, parser_node);
	utils = &panel->utils;

	panel->name = utils->get_property(utils->data,
				"qcom,mdss-dsi-panel-name", NULL);
	if (!panel->name)
		panel->name = DSI_PANEL_DEFAULT_LABEL;

	/*
	 * Set panel type to LCD as default.
	 */
	panel->panel_type = DSI_DISPLAY_PANEL_TYPE_LCD;
	panel_physical_type = utils->get_property(utils->data,
				"qcom,mdss-dsi-panel-physical-type", NULL);
	if (panel_physical_type && !strcmp(panel_physical_type, "oled"))
		panel->panel_type = DSI_DISPLAY_PANEL_TYPE_OLED;
	rc = dsi_panel_parse_host_config(panel);
	if (rc) {
		DSI_ERR("failed to parse host configuration, rc=%d\n",
				rc);
		goto error;
	}

	rc = dsi_panel_parse_panel_mode(panel);
	if (rc) {
		DSI_ERR("failed to parse panel mode configuration, rc=%d\n",
				rc);
		goto error;
	}

	rc = dsi_panel_parse_dfps_caps(panel);
	if (rc)
		DSI_ERR("failed to parse dfps configuration, rc=%d\n", rc);

	rc = dsi_panel_parse_qsync_caps(panel, of_node);
	if (rc)
		DSI_DEBUG("failed to parse qsync features, rc=%d\n", rc);

	rc = dsi_panel_parse_avr_caps(panel, of_node);
	if (rc)
		DSI_ERR("failed to parse AVR features, rc=%d\n", rc);

	rc = dsi_panel_parse_dyn_clk_caps(panel);
	if (rc)
		DSI_ERR("failed to parse dynamic clk config, rc=%d\n", rc);

	rc = dsi_panel_parse_phy_props(panel);
	if (rc) {
		DSI_ERR("failed to parse panel physical dimension, rc=%d\n",
				rc);
		goto error;
	}

	rc = panel->panel_ops.parse_gpios(panel);
	if (rc) {
		DSI_ERR("failed to parse panel gpios, rc=%d\n", rc);
		goto error;
	}

	rc = panel->panel_ops.parse_power_cfg(panel);
	if (rc)
		DSI_ERR("failed to parse power config, rc=%d\n", rc);

	rc = dsi_panel_parse_bl_config(panel);
	if (rc) {
		DSI_ERR("failed to parse backlight config, rc=%d\n", rc);
		if (rc == -EPROBE_DEFER)
			goto error;
	}

	rc = dsi_panel_parse_misc_features(panel);
	if (rc)
		DSI_ERR("failed to parse misc features, rc=%d\n", rc);

	rc = dsi_panel_parse_hdr_config(panel);
	if (rc)
		DSI_ERR("failed to parse hdr config, rc=%d\n", rc);

	rc = dsi_panel_get_mode_count(panel);
	if (rc) {
		DSI_ERR("failed to get mode count, rc=%d\n", rc);
		goto error;
	}

	rc = dsi_panel_parse_dms_info(panel);
	if (rc)
		DSI_DEBUG("failed to get dms info, rc=%d\n", rc);

	rc = dsi_panel_parse_esd_config(panel);
	if (rc)
		DSI_DEBUG("failed to parse esd config, rc=%d\n", rc);

	rc = dsi_panel_vreg_get(panel);
	if (rc) {
		DSI_ERR("[%s] failed to get panel regulators, rc=%d\n",
		       panel->name, rc);
		goto error;
	}

	panel->power_mode = SDE_MODE_DPMS_OFF;
	drm_panel_init(&panel->drm_panel, &panel->mipi_device.dev,
			NULL, DRM_MODE_CONNECTOR_DSI);
	panel->mipi_device.dev.of_node = of_node;

	drm_panel_add(&panel->drm_panel);

	mutex_init(&panel->panel_lock);

	return panel;
error:
	kfree(panel);
	return ERR_PTR(rc);
}

void dsi_panel_put(struct dsi_panel *panel)
{
	drm_panel_remove(&panel->drm_panel);

	/* free resources allocated for ESD check */
	dsi_panel_esd_config_deinit(&panel->esd_config);

	kfree(panel->avr_caps.avr_step_fps_list);
	kfree(panel);
}

int dsi_panel_drv_init(struct dsi_panel *panel,
		       struct mipi_dsi_host *host)
{
	int rc = 0;
	struct mipi_dsi_device *dev;

	if (!panel || !host) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	dev = &panel->mipi_device;

	dev->host = host;
	/*
	 * We dont have device structure since panel is not a device node.
	 * When using drm panel framework, the device is probed when the host is
	 * create.
	 */
	dev->channel = 0;
	dev->lanes = 4;

	panel->host = host;

	rc = panel->panel_ops.pinctrl_init(panel);
	if (rc) {
		DSI_ERR("[%s] failed to init pinctrl, rc=%d\n",
				panel->name, rc);
		goto exit;
	}

	rc = panel->panel_ops.gpio_request(panel);
	if (rc) {
		DSI_ERR("[%s] failed to request gpios, rc=%d\n", panel->name,
		       rc);
		goto error_pinctrl_deinit;
	}

	rc = panel->panel_ops.bl_register(panel);
	if (rc) {
		if (rc != -EPROBE_DEFER)
			DSI_ERR("[%s] failed to register backlight, rc=%d\n",
			       panel->name, rc);
		goto error_gpio_release;
	}

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	ss_panel_init(panel);
#endif

	goto exit;

error_gpio_release:
	(void)dsi_panel_gpio_release(panel);
error_pinctrl_deinit:
	(void)dsi_panel_pinctrl_deinit(panel);
exit:
	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_drv_deinit(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	rc = panel->panel_ops.bl_unregister(panel);
	if (rc)
		DSI_ERR("[%s] failed to unregister backlight, rc=%d\n",
		       panel->name, rc);

	rc = panel->panel_ops.gpio_release(panel);
	if (rc)
		DSI_ERR("[%s] failed to release gpios, rc=%d\n", panel->name,
		       rc);

	rc = panel->panel_ops.pinctrl_deinit(panel);
	if (rc)
		DSI_ERR("[%s] failed to deinit gpios, rc=%d\n", panel->name,
		       rc);

	rc = dsi_panel_vreg_put(panel);
	if (rc)
		DSI_ERR("[%s] failed to put regs, rc=%d\n", panel->name, rc);

	panel->host = NULL;
	memset(&panel->mipi_device, 0x0, sizeof(panel->mipi_device));

	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_validate_mode(struct dsi_panel *panel,
			    struct dsi_display_mode *mode)
{
	return 0;
}

static int dsi_panel_get_max_res_count(struct dsi_parser_utils *utils,
	struct device_node *node, u32 *dsc_count, u32 *lm_count)
{
	const char *compression;
	u32 *array = NULL, top_count, len, i;
	int rc = -EINVAL;
	bool dsc_enable = false;

	*dsc_count = 0;
	*lm_count = 0;
	compression = utils->get_property(node, "qcom,compression-mode", NULL);
	if (compression && !strcmp(compression, "dsc"))
		dsc_enable = true;

	len = utils->count_u32_elems(node, "qcom,display-topology");
	if (len <= 0 || len % TOPOLOGY_SET_LEN ||
			len > (TOPOLOGY_SET_LEN * MAX_TOPOLOGY))
		return rc;

	top_count = len / TOPOLOGY_SET_LEN;

	array = kcalloc(len, sizeof(u32), GFP_KERNEL);
	if (!array)
		return -ENOMEM;

	rc = utils->read_u32_array(node, "qcom,display-topology", array, len);
	if (rc) {
		DSI_ERR("unable to read the display topologies, rc = %d\n", rc);
		goto read_fail;
	}

	for (i = 0; i < top_count; i++) {
		*lm_count = max(*lm_count, array[i * TOPOLOGY_SET_LEN]);
		if (dsc_enable)
			*dsc_count = max(*dsc_count,
					array[i * TOPOLOGY_SET_LEN + 1]);
	}

read_fail:
	kfree(array);
	return 0;
}

int dsi_panel_get_mode_count(struct dsi_panel *panel)
{
	const u32 SINGLE_MODE_SUPPORT = 1;
	struct dsi_parser_utils *utils;
	struct device_node *timings_np, *child_np;
	int num_dfps_rates;
	int num_video_modes = 0, num_cmd_modes = 0;
	int count, rc = 0;
	u32 dsc_count = 0, lm_count = 0;

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	utils = &panel->utils;

	panel->num_timing_nodes = 0;

	timings_np = utils->get_child_by_name(utils->data,
			"qcom,mdss-dsi-display-timings");
	if (!timings_np && !panel->host_config.ext_bridge_mode) {
		DSI_ERR("no display timing nodes defined\n");
		rc = -EINVAL;
		goto error;
	}

	count = utils->get_child_count(timings_np);
	if ((!count && !panel->host_config.ext_bridge_mode) ||
		count > DSI_MODE_MAX) {
		DSI_ERR("invalid count of timing nodes: %d\n", count);
		rc = -EINVAL;
		goto error;
	}

	/* No multiresolution support is available for video mode panels.
	 * Multi-mode is supported for video mode during POMS is enabled.
	 */
	if (panel->panel_mode != DSI_OP_CMD_MODE &&
		!panel->host_config.ext_bridge_mode &&
		!panel->panel_mode_switch_enabled)
		count = SINGLE_MODE_SUPPORT;

	panel->num_timing_nodes = count;
	dsi_for_each_child_node(timings_np, child_np) {
		if (utils->read_bool(child_np, "qcom,mdss-dsi-video-mode"))
			num_video_modes++;
		else if (utils->read_bool(child_np,
					"qcom,mdss-dsi-cmd-mode"))
			num_cmd_modes++;
		else if (panel->panel_mode == DSI_OP_VIDEO_MODE)
			num_video_modes++;
		else if (panel->panel_mode == DSI_OP_CMD_MODE)
			num_cmd_modes++;

		dsi_panel_get_max_res_count(utils, child_np,
				&dsc_count, &lm_count);
		panel->dsc_count = max(dsc_count, panel->dsc_count);
		panel->lm_count = max(lm_count, panel->lm_count);
	}

	num_dfps_rates = !panel->dfps_caps.dfps_support ? 1 :
					panel->dfps_caps.dfps_list_len;

	/* Inflate num_of_modes by fps in dfps. */
	num_video_modes = num_video_modes * num_dfps_rates;

	panel->num_display_modes = num_video_modes + num_cmd_modes;

error:
	return rc;
}

int dsi_panel_get_phy_props(struct dsi_panel *panel,
			    struct dsi_panel_phy_props *phy_props)
{
	int rc = 0;

	if (!panel || !phy_props) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	memcpy(phy_props, &panel->phy_props, sizeof(*phy_props));
	return rc;
}

int dsi_panel_get_dfps_caps(struct dsi_panel *panel,
			    struct dsi_dfps_capabilities *dfps_caps)
{
	int rc = 0;

	if (!panel || !dfps_caps) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	memcpy(dfps_caps, &panel->dfps_caps, sizeof(*dfps_caps));
	return rc;
}

void dsi_panel_put_mode(struct dsi_display_mode *mode)
{
	int i;

	if (!mode->priv_info)
		return;

	for (i = 0; i < DSI_CMD_SET_MAX; i++) {
		dsi_panel_destroy_cmd_packets(&mode->priv_info->cmd_sets[i]);
		dsi_panel_dealloc_cmd_packets(&mode->priv_info->cmd_sets[i]);
	}

	kfree(mode->priv_info);
}

void dsi_panel_calc_dsi_transfer_time(struct dsi_host_common_cfg *config,
		struct dsi_display_mode *mode, u32 frame_threshold_us)
{
	u32 frame_time_us, nslices;
	u64 min_bitclk_hz, total_active_pixels, bits_per_line, pclk_rate_hz,
		dsi_transfer_time_us, pixel_clk_khz;
	struct msm_display_dsc_info *dsc = mode->timing.dsc;
	struct dsi_mode_info *timing = &mode->timing;
	struct dsi_display_mode *display_mode;
	u32 jitter_numer, jitter_denom, prefill_lines;
	u32 default_prefill_lines, actual_prefill_lines, vtotal;
	u32 min_threshold_us, prefill_time_us, max_transfer_us, packet_overhead;
	u32 bits_per_symbol = 16, num_of_symbols = 7; /* For Cphy */
	u16 bpp;

	/* Packet overhead in bits,
	 * DPHY: 4 bytes header + 2 bytes checksum + 1 byte dcs data command.
	 * CPHY: 8 bytes header + 4 bytes checksum + 2 bytes SYNC +
	 * 1 byte dcs data command.
	*/
	if (config->phy_type & DSI_PHY_TYPE_CPHY)
		packet_overhead = 120;
	else
		packet_overhead = 56;

	display_mode = container_of(timing, struct dsi_display_mode, timing);

	jitter_numer = display_mode->priv_info->panel_jitter_numer;
	jitter_denom = display_mode->priv_info->panel_jitter_denom;

	frame_time_us = mult_frac(1000, 1000, (timing->refresh_rate));

	if (timing->refresh_rate >= 120)
		frame_threshold_us = HIGH_REFRESH_RATE_THRESHOLD_TIME_US;

	if (timing->dsc_enabled) {
		nslices = (timing->h_active)/(dsc->config.slice_width);
		/* (slice width x bit-per-pixel + packet overhead) x
		 * number of slices x height x fps / lane
		 */
		bpp = DSC_BPP(dsc->config);
		bits_per_line = ((dsc->config.slice_width * bpp) +
				packet_overhead) * nslices;
		bits_per_line = bits_per_line / (config->num_data_lanes);

		min_bitclk_hz = (bits_per_line * timing->v_active *
					timing->refresh_rate);
	} else {
		total_active_pixels = ((dsi_h_active_dce(timing)
					* timing->v_active));
		/* calculate the actual bitclk needed to transfer the frame */
		min_bitclk_hz = (total_active_pixels * (timing->refresh_rate) *
				(mode->bpp));
		do_div(min_bitclk_hz, config->num_data_lanes);
	}

	timing->min_dsi_clk_hz = min_bitclk_hz;

	if (config->phy_type == DSI_PHY_TYPE_CPHY) {
		do_div(timing->min_dsi_clk_hz, bits_per_symbol);
		timing->min_dsi_clk_hz *= num_of_symbols;
	}

	/*
	 * Apart from prefill line time, we need to take into account RSCC mode threshold time. In
	 * cases where RSC is disabled, as jitter is no longer considered we need to make sure we
	 * have enough time for DCS command transfer. As of now, the RSC threshold time and DCS
	 * threshold time are configured to 40us.
	 */
	if (mode->priv_info->disable_rsc_solver) {
		min_threshold_us = DCS_COMMAND_THRESHOLD_TIME_US;
	} else {
		min_threshold_us = mult_frac(frame_time_us, jitter_numer, (jitter_denom * 100));
		min_threshold_us += RSCC_MODE_THRESHOLD_TIME_US;
	}

	/*
	 * Increase the prefill_lines proportionately as recommended
	 * 40lines for 60fps, 60 for 90fps, 120lines for 120fps, and so on.
	 */
	default_prefill_lines = mult_frac(MIN_PREFILL_LINES, timing->refresh_rate, 60);

	actual_prefill_lines = timing->v_back_porch + timing->v_front_porch + timing->v_sync_width;
	vtotal = actual_prefill_lines + timing->v_active;

	/* consider the max of default prefill lines and actual prefill lines */
	prefill_lines = max(actual_prefill_lines, default_prefill_lines);

	prefill_time_us = mult_frac(frame_time_us, prefill_lines, vtotal);

	min_threshold_us = min_threshold_us + prefill_time_us;

	DSI_DEBUG("min threshold time=%d\n", min_threshold_us);

	if (timing->clk_rate_hz) {
		/* adjust the transfer time proportionately for bit clk*/
		dsi_transfer_time_us = frame_time_us * min_bitclk_hz;
		do_div(dsi_transfer_time_us, timing->clk_rate_hz);
		timing->dsi_transfer_time_us = dsi_transfer_time_us;

	} else if (mode->priv_info->mdp_transfer_time_us) {
		max_transfer_us = frame_time_us - min_threshold_us;
		mode->priv_info->mdp_transfer_time_us = min(
				mode->priv_info->mdp_transfer_time_us,
				max_transfer_us);
		timing->dsi_transfer_time_us =
			mode->priv_info->mdp_transfer_time_us;
	} else {
		if ((min_threshold_us > frame_threshold_us) ||
				(mode->priv_info->disable_rsc_solver))
			frame_threshold_us = min_threshold_us;

		timing->dsi_transfer_time_us = frame_time_us -
			frame_threshold_us;
	}

	timing->mdp_transfer_time_us = timing->dsi_transfer_time_us;

	/* Force update mdp xfer time to hal,if clk and mdp xfer time is set */
	if (mode->priv_info->mdp_transfer_time_us && timing->clk_rate_hz) {
		timing->mdp_transfer_time_us =
			mode->priv_info->mdp_transfer_time_us;
	}

	/* Calculate pclk_khz to update modeinfo */
	pclk_rate_hz =  min_bitclk_hz * frame_time_us;
	do_div(pclk_rate_hz, timing->dsi_transfer_time_us);

	pixel_clk_khz = pclk_rate_hz * config->num_data_lanes;
	do_div(pixel_clk_khz, mode->bpp);
	display_mode->pixel_clk_khz = pixel_clk_khz;

	display_mode->pixel_clk_khz =  display_mode->pixel_clk_khz / 1000;
}


int dsi_panel_get_mode(struct dsi_panel *panel,
			u32 index, struct dsi_display_mode *mode,
			int topology_override)
{
	struct device_node *timings_np, *child_np;
	struct dsi_parser_utils *utils;
	struct dsi_display_mode_priv_info *prv_info;
	u32 child_idx = 0;
	int rc = 0, num_timings;
	int traffic_mode;
	void *utils_data = NULL;
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	struct samsung_display_driver_data *vdd;
#endif

	if (!panel || !mode) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);
	utils = &panel->utils;

	prv_info = mode->priv_info;

	timings_np = utils->get_child_by_name(utils->data,
		"qcom,mdss-dsi-display-timings");
	if (!timings_np) {
		DSI_ERR("no display timing nodes defined\n");
		rc = -EINVAL;
		goto parse_fail;
	}

	num_timings = utils->get_child_count(timings_np);
	if (!num_timings || num_timings > DSI_MODE_MAX) {
		DSI_ERR("invalid count of timing nodes: %d\n", num_timings);
		rc = -EINVAL;
		goto parse_fail;
	}

	utils_data = utils->data;
	traffic_mode = panel->video_config.traffic_mode;

	dsi_for_each_child_node(timings_np, child_np) {
		if (index != child_idx++)
			continue;

		utils->data = child_np;

		if (panel->panel_mode_switch_enabled) {
			if (!dsi_panel_parse_panel_mode_caps(mode, utils)) {
				mode->panel_mode_caps = panel->panel_mode;
				DSI_INFO("panel mode isn't specified in timing[%d]\n",
				child_idx);
			}
		} else {
			mode->panel_mode_caps = panel->panel_mode;
		}

		if (panel->host_config.bpp_switch_enabled) {
			rc = dsi_panel_parse_bpp_mode_caps(mode, utils);
			if (rc) {
				DSI_ERR("failed to parse bpp mode caps, rc=%d\n", rc);
				goto parse_fail;
			}
		} else {
			mode->pixel_format_caps = panel->host_config.dst_format;
		}
		mode->bpp = dsi_pixel_format_to_bpp(mode->pixel_format_caps);

		rc = utils->read_u32(utils->data, "cell-index", &mode->mode_idx);
		if (rc)
			mode->mode_idx = index;

		rc = dsi_panel_parse_timing(&mode->timing, utils);
		if (rc) {
			DSI_ERR("failed to parse panel timing, rc=%d\n", rc);
			goto parse_fail;
		}

		if (panel->dyn_clk_caps.dyn_clk_support) {
			rc = dsi_panel_parse_dyn_clk_list(mode, utils);
			if (rc)
				DSI_ERR("failed to parse dynamic clk rates, rc=%d\n", rc);
		}

		rc = dsi_panel_parse_dsc_params(mode, utils);
		if (rc) {
			DSI_ERR("failed to parse dsc params, rc=%d\n", rc);
			goto parse_fail;
		}

		rc = dsi_panel_parse_vdc_params(mode, utils, traffic_mode);
		if (rc) {
			DSI_ERR("failed to parse vdc params, rc=%d\n", rc);
			goto parse_fail;
		}

		rc = dsi_panel_parse_topology(prv_info, utils,
				topology_override);
		if (rc) {
			DSI_ERR("failed to parse panel topology, rc=%d\n", rc);
			goto parse_fail;
		}

		rc = dsi_panel_parse_cmd_sets(prv_info, utils);
		if (rc) {
			DSI_ERR("failed to parse command sets, rc=%d\n", rc);
			goto parse_fail;
		}

		rc = dsi_panel_parse_jitter_config(mode, utils);
		if (rc)
			DSI_ERR(
			"failed to parse panel jitter config, rc=%d\n", rc);

		rc = dsi_panel_parse_phy_timing(mode, utils);
		if (rc) {
			DSI_ERR(
			"failed to parse panel phy timings, rc=%d\n", rc);
			goto parse_fail;
		}

		rc = dsi_panel_parse_partial_update_caps(mode, utils);
		if (rc)
			DSI_ERR("failed to partial update caps, rc=%d\n", rc);
	}
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	vdd = panel->panel_private;
	vdd->num_of_intf = mode->priv_info->topology.num_intf;
	LCD_INFO_ONCE(vdd, "vdd->num_of_intf = %d\n", vdd->num_of_intf);
	if (mode->timing.qsync_min_fps) {
		LCD_INFO(vdd, "index(%d) : mdp_transfer_time_us(%d), qsync fs(%d)\n",
			index, mode->priv_info->mdp_transfer_time_us,
			mode->timing.qsync_min_fps);
	}
#endif


parse_fail:
	utils->data = utils_data;
	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_get_host_cfg_for_mode(struct dsi_panel *panel,
				    struct dsi_display_mode *mode,
				    struct dsi_host_config *config)
{
	int rc = 0;
	struct dsi_dyn_clk_caps *dyn_clk_caps = &panel->dyn_clk_caps;
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	struct samsung_display_driver_data *vdd;
#endif

	if (!panel || !mode || !config) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	config->panel_mode = panel->panel_mode;
	memcpy(&config->common_config, &panel->host_config,
	       sizeof(config->common_config));

	if (panel->panel_mode == DSI_OP_VIDEO_MODE) {
		memcpy(&config->u.video_engine, &panel->video_config,
		       sizeof(config->u.video_engine));
	} else {
		memcpy(&config->u.cmd_engine, &panel->cmd_config,
		       sizeof(config->u.cmd_engine));
	}

	memcpy(&config->video_timing, &mode->timing,
	       sizeof(config->video_timing));
	config->video_timing.mdp_transfer_time_us =
			mode->priv_info->mdp_transfer_time_us;
	config->video_timing.dsc_enabled = mode->priv_info->dsc_enabled;
	config->video_timing.dsc = &mode->priv_info->dsc;

	config->video_timing.vdc_enabled = mode->priv_info->vdc_enabled;
	config->video_timing.vdc = &mode->priv_info->vdc;

	if (dyn_clk_caps->dyn_clk_support)
		config->bit_clk_rate_hz_override = mode->timing.clk_rate_hz;
	else
		config->bit_clk_rate_hz_override = mode->priv_info->clk_rate_hz;

	config->esc_clk_rate_hz = 19200000;
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	vdd = panel->panel_private;
	if (vdd->dtsi_data.samsung_esc_clk_128M)
		config->esc_clk_rate_hz = 12800000;
#endif

	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_pre_prepare(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	ss_panel_power_on_pre_lp11(panel->panel_private);
#endif

	/* If LP11_INIT is set, panel will be powered up during prepare() */
	if (panel->lp11_init)
		goto error;

	rc = dsi_panel_power_on(panel);
	if (rc) {
		DSI_ERR("[%s] panel power on failed, rc=%d\n", panel->name, rc);
		goto error;
	}

error:
	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_update_pps(struct dsi_panel *panel)
{
	int rc = 0;
	struct dsi_panel_cmd_set *set = NULL;
	struct dsi_display_mode_priv_info *priv_info = NULL;

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	/* Do not use QC PPS -> add PPS cmds in on_seq */
	return 0;
#endif

	if (!panel || !panel->cur_mode) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	priv_info = panel->cur_mode->priv_info;

	set = &priv_info->cmd_sets[DSI_CMD_SET_PPS];

	if (priv_info->dsc_enabled)
		dsi_dsc_create_pps_buf_cmd(&priv_info->dsc,
				panel->dce_pps_cmd, 0,
				DSI_CMD_PPS_SIZE - DSI_CMD_PPS_HDR_SIZE);
	else if (priv_info->vdc_enabled)
		dsi_vdc_create_pps_buf_cmd(&priv_info->vdc,
				panel->dce_pps_cmd, 0,
				DSI_CMD_PPS_SIZE - DSI_CMD_PPS_HDR_SIZE);

	if (priv_info->dsc_enabled || priv_info->vdc_enabled) {
		rc = dsi_panel_create_cmd_packets(panel->dce_pps_cmd,
				DSI_CMD_PPS_SIZE, 1, set->cmds);
		if (rc) {
			DSI_ERR("failed to create cmd packets, rc=%d\n", rc);
			goto error;
		}
	}

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_PPS);
	if (rc) {
		DSI_ERR("[%s] failed to send DSI_CMD_SET_PPS cmds, rc=%d\n",
			panel->name, rc);
	}

	dsi_panel_destroy_cmd_packets(set);
error:
	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_set_lp1(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);
	if (!panel->panel_initialized)
		goto exit;

	/*
	 * Consider LP1->LP2->LP1.
	 * If the panel is already in LP mode, do not need to
	 * set the regulator.
	 * IBB and AB power mode would be set at the same time
	 * in PMIC driver, so we only call ibb setting that is enough.
	 */
	if (dsi_panel_is_type_oled(panel) &&
		panel->power_mode != SDE_MODE_DPMS_LP2)
		dsi_pwr_panel_regulator_mode_set(&panel->power_info,
			"ibb", REGULATOR_MODE_IDLE);
	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_LP1);
	if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_LP1 cmd, rc=%d\n",
		       panel->name, rc);
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	ss_panel_low_power_config(panel->panel_private, true);
#endif
exit:
	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_set_lp2(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);
	if (!panel->panel_initialized)
		goto exit;

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_LP2);
	if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_LP2 cmd, rc=%d\n",
		       panel->name, rc);
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	ss_panel_low_power_config(panel->panel_private, true);
#endif
exit:
	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_set_nolp(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);
	if (!panel->panel_initialized)
		goto exit;

	/*
	 * Consider about LP1->LP2->NOLP.
	 */
	if (dsi_panel_is_type_oled(panel) &&
	    (panel->power_mode == SDE_MODE_DPMS_LP1 ||
	     panel->power_mode == SDE_MODE_DPMS_LP2))
		dsi_pwr_panel_regulator_mode_set(&panel->power_info,
			"ibb", REGULATOR_MODE_NORMAL);
	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_NOLP);
	if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_NOLP cmd, rc=%d\n",
		       panel->name, rc);
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	ss_panel_low_power_config(panel->panel_private, false);
#endif
exit:
	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_prepare(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	ss_panel_power_on_post_lp11(panel->panel_private);
#endif

	if (panel->lp11_init) {
		rc = dsi_panel_power_on(panel);
		if (rc) {
			DSI_ERR("[%s] panel power on failed, rc=%d\n",
			       panel->name, rc);
			goto error;
		}
	}

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_PRE_ON);
	if (rc) {
		DSI_ERR("[%s] failed to send DSI_CMD_SET_PRE_ON cmds, rc=%d\n",
		       panel->name, rc);
		goto error;
	}

error:
	mutex_unlock(&panel->panel_lock);
	return rc;
}

static int dsi_panel_roi_prepare_dcs_cmds(struct dsi_panel_cmd_set *set,
		struct dsi_rect *roi, int ctrl_idx, int unicast)
{
	static const int ROI_CMD_LEN = 5;

	int rc = 0;

	/* DTYPE_DCS_LWRITE */
	char *caset, *paset;

	set->cmds = NULL;

	caset = kzalloc(ROI_CMD_LEN, GFP_KERNEL);
	if (!caset) {
		rc = -ENOMEM;
		goto exit;
	}
	caset[0] = 0x2a;
	caset[1] = (roi->x & 0xFF00) >> 8;
	caset[2] = roi->x & 0xFF;
	caset[3] = ((roi->x - 1 + roi->w) & 0xFF00) >> 8;
	caset[4] = (roi->x - 1 + roi->w) & 0xFF;

	paset = kzalloc(ROI_CMD_LEN, GFP_KERNEL);
	if (!paset) {
		rc = -ENOMEM;
		goto error_free_mem;
	}
	paset[0] = 0x2b;
	paset[1] = (roi->y & 0xFF00) >> 8;
	paset[2] = roi->y & 0xFF;
	paset[3] = ((roi->y - 1 + roi->h) & 0xFF00) >> 8;
	paset[4] = (roi->y - 1 + roi->h) & 0xFF;

	set->type = DSI_CMD_SET_ROI;
	set->state = DSI_CMD_SET_STATE_LP;
	set->count = 2; /* send caset + paset together */
	set->cmds = kcalloc(set->count, sizeof(*set->cmds), GFP_KERNEL);
	if (!set->cmds) {
		rc = -ENOMEM;
		goto error_free_mem;
	}
	set->cmds[0].msg.channel = 0;
	set->cmds[0].msg.type = MIPI_DSI_DCS_LONG_WRITE;
	set->cmds[0].msg.flags = unicast ? MIPI_DSI_MSG_UNICAST_COMMAND : 0;
	set->cmds[0].msg.flags |= MIPI_DSI_MSG_BATCH_COMMAND;
	set->cmds[0].msg.tx_len = ROI_CMD_LEN;
	set->cmds[0].msg.tx_buf = caset;
	set->cmds[0].msg.rx_len = 0;
	set->cmds[0].msg.rx_buf = 0;
	set->cmds[0].last_command = 0;
	set->cmds[0].post_wait_ms = 0;
	set->cmds[0].ctrl = unicast ? ctrl_idx : 0;

	set->cmds[1].msg.channel = 0;
	set->cmds[1].msg.type = MIPI_DSI_DCS_LONG_WRITE;
	set->cmds[1].msg.flags = unicast ? MIPI_DSI_MSG_UNICAST_COMMAND : 0;
	set->cmds[1].msg.tx_len = ROI_CMD_LEN;
	set->cmds[1].msg.tx_buf = paset;
	set->cmds[1].msg.rx_len = 0;
	set->cmds[1].msg.rx_buf = 0;
	set->cmds[1].last_command = 1;
	set->cmds[1].post_wait_ms = 0;
	set->cmds[1].ctrl = unicast ? ctrl_idx : 0;

	goto exit;

error_free_mem:
	kfree(caset);
	kfree(paset);
	kfree(set->cmds);

exit:
	return rc;
}

int dsi_panel_send_qsync_on_dcs(struct dsi_panel *panel,
		int ctrl_idx)
{
	int rc = 0;
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	struct samsung_display_driver_data *vdd;
#endif

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	DSI_INFO("ctrl:%d qsync on\n", ctrl_idx);
	vdd = panel->panel_private;
	if (vdd) {
		if (!SS_IS_CMDS_NULL(ss_get_cmds(vdd, TX_EARLY_TE))) {
			vdd->early_te = true;
			vdd->check_early_te = CHECK_EARLY_TE_COUNT;
			if (vdd->panel_state != PANEL_PWR_LPM)
				ss_send_cmd(vdd, TX_EARLY_TE);
		}
	}
#else
	DSI_DEBUG("ctrl:%d qsync on\n", ctrl_idx);
	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_QSYNC_ON);
	if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_QSYNC_ON cmds rc=%d\n",
		       panel->name, rc);
#endif

	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_send_qsync_off_dcs(struct dsi_panel *panel,
		int ctrl_idx)
{
	int rc = 0;
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	struct samsung_display_driver_data *vdd;
#endif

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);


#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	DSI_INFO("ctrl:%d qsync off\n", ctrl_idx);
	vdd = panel->panel_private;
	if (vdd) {
		if (!SS_IS_CMDS_NULL(ss_get_cmds(vdd, TX_EARLY_TE))) {
			vdd->early_te = false;
			if (vdd->panel_state != PANEL_PWR_LPM)
				ss_send_cmd(vdd, TX_EARLY_TE);
		}
	}
#else
	DSI_DEBUG("ctrl:%d qsync off\n", ctrl_idx);
	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_QSYNC_OFF);
	if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_QSYNC_OFF cmds rc=%d\n",
		       panel->name, rc);
#endif

	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_send_roi_dcs(struct dsi_panel *panel, int ctrl_idx,
		struct dsi_rect *roi)
{
	int rc = 0;
	struct dsi_panel_cmd_set *set;
	struct dsi_display_mode_priv_info *priv_info;

	if (!panel || !panel->cur_mode) {
		DSI_ERR("Invalid params\n");
		return -EINVAL;
	}

	priv_info = panel->cur_mode->priv_info;
	set = &priv_info->cmd_sets[DSI_CMD_SET_ROI];

	rc = dsi_panel_roi_prepare_dcs_cmds(set, roi, ctrl_idx, true);
	if (rc) {
		DSI_ERR("[%s] failed to prepare DSI_CMD_SET_ROI cmds, rc=%d\n",
				panel->name, rc);
		return rc;
	}
	DSI_DEBUG("[%s] send roi x %d y %d w %d h %d\n", panel->name,
			roi->x, roi->y, roi->w, roi->h);
	SDE_EVT32(roi->x, roi->y, roi->w, roi->h);

	mutex_lock(&panel->panel_lock);

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_ROI);
	if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_ROI cmds, rc=%d\n",
				panel->name, rc);

	mutex_unlock(&panel->panel_lock);

	dsi_panel_destroy_cmd_packets(set);
	dsi_panel_dealloc_cmd_packets(set);

	return rc;
}

int dsi_panel_switch_cmd_mode_out(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("Invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_CMD_SWITCH_OUT);
	if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_CMD_SWITCH_OUT cmds, rc=%d\n",
		       panel->name, rc);

	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_switch_video_mode_out(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("Invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_VID_SWITCH_OUT);
	if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_VID_SWITCH_OUT cmds, rc=%d\n",
		       panel->name, rc);

	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_switch_video_mode_in(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("Invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_VID_SWITCH_IN);
	if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_VID_SWITCH_IN cmds, rc=%d\n",
		       panel->name, rc);

	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_switch_cmd_mode_in(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("Invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_CMD_SWITCH_IN);
	if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_CMD_SWITCH_IN cmds, rc=%d\n",
		       panel->name, rc);

	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_switch(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("Invalid params\n");
		return -EINVAL;
	}

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	if (panel->panel_private) {
		struct samsung_display_driver_data *vdd = panel->panel_private;

		if (vdd->vrr.support_vrr_based_bl) {
			/* Sometimes, GFX HAL sends DMS that inlcudes multi resolution and VRR,
			 * at one DMS commands. So, always handler DMS here.
			 */
			ss_panel_dms_switch(vdd);
			return 0;
		}

		/* In QCT original VRR mode, below variables is meaningless..
		 * But, to keep latest information for debugging,
		 * update current vrr variables.
		 */
		vdd->vrr.cur_refresh_rate = vdd->vrr.adjusted_refresh_rate;
		vdd->vrr.cur_sot_hs_mode = vdd->vrr.adjusted_sot_hs_mode;
		vdd->vrr.cur_phs_mode = vdd->vrr.adjusted_phs_mode;
		vdd->vrr.cur_h_active = vdd->vrr.adjusted_h_active;
		vdd->vrr.cur_v_active = vdd->vrr.adjusted_v_active;

		/* Do we have to change param only when the HS<->NORMAL be changed?
		 * No problem to notify VRR change in panel not supporting VRR?
		 */
		ss_set_vrr_switch(vdd, true);
	}
#endif

	mutex_lock(&panel->panel_lock);

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_TIMING_SWITCH);
	if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_TIMING_SWITCH cmds, rc=%d\n",
		       panel->name, rc);

	mutex_unlock(&panel->panel_lock);

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	ss_send_cmd(panel->panel_private, TX_TIMING_SWITCH);
#endif

	return rc;
}

int dsi_panel_post_switch(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("Invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_POST_TIMING_SWITCH);
	if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_POST_TIMING_SWITCH cmds, rc=%d\n",
		       panel->name, rc);

	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_enable(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("Invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_ON);
	if (rc) {
		DSI_ERR("[%s] failed to send DSI_CMD_SET_ON cmds, rc=%d\n",
		       panel->name, rc);
		goto error;
	}

	if (panel->panel_mode == DSI_OP_CMD_MODE) {
		rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_CMD_ON);
		if (rc) {
			DSI_ERR("[%s] failed to send DSI_CMD_SET_CMD_ON cmds, rc=%d\n",
			       panel->name, rc);
			goto error;
		}
	} else if (panel->panel_mode == DSI_OP_VIDEO_MODE) {
		rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_VID_ON);
		if (rc) {
			DSI_ERR("[%s] failed to send DSI_CMD_SET_VID_ON cmds, rc=%d\n",
			       panel->name, rc);
			goto error;
		}
	}
	panel->panel_initialized = true;

error:
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	ss_panel_on(panel->panel_private);
#endif
	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_post_enable(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_POST_ON);
	if (rc) {
		DSI_ERR("[%s] failed to send DSI_CMD_SET_POST_ON cmds, rc=%d\n",
		       panel->name, rc);
		goto error;
	}
error:
	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_pre_disable(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	if (gpio_is_valid(panel->bl_config.en_gpio))
		gpio_set_value(panel->bl_config.en_gpio, 0);

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	ss_panel_off_pre(panel->panel_private);
#endif

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_PRE_OFF);
	if (rc) {
		DSI_ERR("[%s] failed to send DSI_CMD_SET_PRE_OFF cmds, rc=%d\n",
		       panel->name, rc);
		goto error;
	}

error:
	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_disable(struct dsi_panel *panel)
{
	int rc = 0;
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	struct samsung_display_driver_data *vdd;
#endif

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	vdd = panel->panel_private;
	LCD_INFO(vdd, "++\n");
#endif
	mutex_lock(&panel->panel_lock);

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	if (!ss_panel_attach_get(panel->panel_private)) {
		LCD_INFO(vdd, "PBA booting, skip to disable panel\n");
		goto skip_cmd_tx;
	}
#endif

	/* Avoid sending panel off commands when ESD recovery is underway */
	if (!atomic_read(&panel->esd_recovery_pending)) {
		/*
		 * Need to set IBB/AB regulator mode to STANDBY,
		 * if panel is going off from AOD mode.
		 */
		if (dsi_panel_is_type_oled(panel) &&
			(panel->power_mode == SDE_MODE_DPMS_LP1 ||
			panel->power_mode == SDE_MODE_DPMS_LP2))
			dsi_pwr_panel_regulator_mode_set(&panel->power_info,
				"ibb", REGULATOR_MODE_STANDBY);
		rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_OFF);
		if (rc) {
			/*
			 * Sending panel off commands may fail when  DSI
			 * controller is in a bad state. These failures can be
			 * ignored since controller will go for full reset on
			 * subsequent display enable anyway.
			 */
			pr_warn_ratelimited("[%s] failed to send DSI_CMD_SET_OFF cmds, rc=%d\n",
					panel->name, rc);
			rc = 0;
		}
	}
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
skip_cmd_tx:
	ss_panel_off_post(panel->panel_private);
#endif

	panel->panel_initialized = false;
	panel->power_mode = SDE_MODE_DPMS_OFF;

	mutex_unlock(&panel->panel_lock);
#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	LCD_INFO(vdd, "--\n");
#endif
	return rc;
}

int dsi_panel_unprepare(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_POST_OFF);
	if (rc) {
		DSI_ERR("[%s] failed to send DSI_CMD_SET_POST_OFF cmds, rc=%d\n",
		       panel->name, rc);
		goto error;
	}

error:

#if IS_ENABLED(CONFIG_DISPLAY_SAMSUNG)
	ss_panel_power_off_pre_lp11(panel->panel_private);
#endif

	mutex_unlock(&panel->panel_lock);
	return rc;
}

int dsi_panel_post_unprepare(struct dsi_panel *panel)
{
	int rc = 0;

	if (!panel) {
		DSI_ERR("invalid params\n");
		return -EINVAL;
	}

	mutex_lock(&panel->panel_lock);

	rc = dsi_panel_power_off(panel);
	if (rc) {
		DSI_ERR("[%s] panel power_Off failed, rc=%d\n",
		       panel->name, rc);
		goto error;
	}
error:
	mutex_unlock(&panel->panel_lock);
	return rc;
}