android_kernel_samsung_sm8650-modules/hal/wifi3.0/hal_srng.c

/*
 * Copyright (c) 2016, The Linux Foundation. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above
 *       copyright notice, this list of conditions and the following
 *       disclaimer in the documentation and/or other materials provided
 *       with the distribution.
 *     * Neither the name of The Linux Foundation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "hal_api.h"

/**
 * Common SRNG register access macros:
 * The SRNG registers are distributed accross various UMAC and LMAC HW blocks,
 * but the register group and format is exactly same for all rings, with some
 * difference between producer rings (these are 'producer rings' with respect
 * to HW and refered as 'destination rings' in SW) and consumer rings (these
 * are 'consumer rings' with respect to HW and refered as 'source rings' in SW).
 * The following macros provide uniform access to all SRNG rings.
 */

/* SRNG registers are split among two groups R0 and R2 and following
 * definitions identify the group to which each register belongs to
 */
#define R0_INDEX 0
#define R2_INDEX 1

#define HWREG_INDEX(_reg_group) _reg_group ## _ ## INDEX

/* Registers in R0 group */
#define BASE_LSB_GROUP R0
#define BASE_MSB_GROUP R0
#define ID_GROUP R0
#define STATUS_GROUP R0
#define MISC_GROUP R0
#define HP_ADDR_LSB_GROUP R0
#define HP_ADDR_MSB_GROUP R0
#define PRODUCER_INT_SETUP_GROUP R0
#define PRODUCER_INT_STATUS_GROUP R0
#define PRODUCER_FULL_COUNTER_GROUP R0
#define MSI1_BASE_LSB_GROUP R0
#define MSI1_BASE_MSB_GROUP R0
#define MSI1_DATA_GROUP R0
#define HP_TP_SW_OFFSET_GROUP R0
#define TP_ADDR_LSB_GROUP R0
#define TP_ADDR_MSB_GROUP R0
#define CONSUMER_INT_SETUP_IX0_GROUP R0
#define CONSUMER_INT_SETUP_IX1_GROUP R0
#define CONSUMER_INT_STATUS_GROUP R0
#define CONSUMER_EMPTY_COUNTER_GROUP R0
#define CONSUMER_PREFETCH_TIMER_GROUP R0
#define CONSUMER_PREFETCH_STATUS_GROUP R0

/* Registers in R2 group */
#define HP_GROUP R2
#define TP_GROUP R2

/**
 * Register definitions for all SRNG based rings are same, except few
 * differences between source (HW consumer) and destination (HW producer)
 * registers. Following macros definitions provide generic access to all
 * SRNG based rings.
 * For source rings, we will use the register/field definitions of SW2TCL1
 * ring defined in the HW header file mac_tcl_reg_seq_hwioreg.h. To setup
 * individual fields, SRNG_SM macros should be used with fields specified
 * using SRNG_SRC_FLD(<register>, <field>), Register writes should be done
 * using SRNG_SRC_REG_WRITE(<hal_srng>, <register>, <value>).
 * Similarly for destination rings we will use definitions of REO2SW1 ring
 * defined in the register reo_destination_ring.h. To setup individual
 * fields SRNG_SM macros should be used with fields specified using
 * SRNG_DST_FLD(<register>, <field>). Register writes should be done using
 * SRNG_DST_REG_WRITE(<hal_srng>, <register>, <value>).
 */

#define SRNG_DST_REG_OFFSET(_reg, _reg_group) \
	HWIO_REO_ ## _reg_group ## _REO2SW1_RING_ ## _reg##_ADDR(0)

#define SRNG_SRC_REG_OFFSET(_reg, _reg_group) \
	HWIO_TCL_ ## _reg_group ## _SW2TCL1_RING_ ## _reg ## _ADDR(0)

#define _SRNG_DST_FLD(_reg_group, _reg_fld) \
	HWIO_REO_ ## _reg_group ## _REO2SW1_RING_ ## _reg_fld
#define _SRNG_SRC_FLD(_reg_group, _reg_fld) \
	HWIO_TCL_ ## _reg_group ## _SW2TCL1_RING_ ## _reg_fld

#define _SRNG_FLD(_reg_group, _reg_fld, _dir) \
	_SRNG_ ## _dir ## _FLD(_reg_group, _reg_fld)

#define SRNG_DST_FLD(_reg, _f) _SRNG_FLD(_reg ## _GROUP, _reg ## _ ## _f, DST)
#define SRNG_SRC_FLD(_reg, _f) _SRNG_FLD(_reg ## _GROUP, _reg ## _ ## _f, SRC)

#define SRNG_SRC_R0_START_OFFSET SRNG_SRC_REG_OFFSET(BASE_LSB, R0)
#define SRNG_DST_R0_START_OFFSET SRNG_DST_REG_OFFSET(BASE_LSB, R0)

#define SRNG_SRC_R2_START_OFFSET SRNG_SRC_REG_OFFSET(HP, R2)
#define SRNG_DST_R2_START_OFFSET SRNG_DST_REG_OFFSET(HP, R2)

#define SRNG_SRC_START_OFFSET(_reg_group) \
	SRNG_SRC_ ## _reg_group ## _START_OFFSET
#define SRNG_DST_START_OFFSET(_reg_group) \
	SRNG_DST_ ## _reg_group ## _START_OFFSET

#define SRNG_REG_ADDR(_srng, _reg, _reg_group, _dir) \
	((_srng)->hwreg_base[HWREG_INDEX(_reg_group)] + \
		SRNG_ ## _dir ## _REG_OFFSET(_reg, _reg_group) - \
		SRNG_ ## _dir ## _START_OFFSET(_reg_group))

#define SRNG_DST_ADDR(_srng, _reg) \
	SRNG_REG_ADDR(_srng, _reg, _reg ## _GROUP, DST)

#define SRNG_SRC_ADDR(_srng, _reg) \
	SRNG_REG_ADDR(_srng, _reg, _reg ## _GROUP, SRC)

#define SRNG_REG_WRITE(_srng, _reg, _value, _dir) \
	hif_write32_mb(SRNG_ ## _dir ## _ADDR(_srng, _reg), (_value))

#define SRNG_REG_READ(_srng, _reg, _dir) \
	hif_read32_mb(SRNG_ ## _dir ## _ADDR(_srng, _reg))

#define SRNG_SRC_REG_WRITE(_srng, _reg, _value) \
	SRNG_REG_WRITE(_srng, _reg, _value, SRC)

#define SRNG_DST_REG_WRITE(_srng, _reg, _value) \
	SRNG_REG_WRITE(_srng, _reg, _value, DST)

#define SRNG_SRC_REG_READ(_srng, _reg) \
	SRNG_REG_READ(_srng, _reg, SRC)

#define _SRNG_FM(_reg_fld) _reg_fld ## _BMSK
#define _SRNG_FS(_reg_fld) _reg_fld ## _SHFT

#define SRNG_SM(_reg_fld, _val) \
	(((_val) << _SRNG_FS(_reg_fld)) & _SRNG_FM(_reg_fld))

#define SRNG_MS(_reg_fld, _val) \
	(((_val) & _SRNG_FM(_reg_fld)) >> _SRNG_FS(_reg_fld))

/**
 * HW ring configuration table to identify hardware ring attributes like
 * register addresses, number of rings, ring entry size etc., for each type
 * of SRNG ring.
 *
 * Currently there is just one HW ring table, but there could be multiple
 * configurations in future based on HW variants from the same wifi3.0 family
 * and hence need to be attached with hal_soc based on HW type
 */
#define HAL_SRNG_CONFIG(_hal_soc, _ring_type) (&hw_srng_table[_ring_type])

static struct hal_hw_srng_config hw_srng_table[] = {
	/* TODO: max_rings can populated by querying HW capabilities */
	{ /* REO_DST */
		.start_ring_id = HAL_SRNG_REO2SW1,
		.max_rings = 4,
		.entry_size = sizeof(struct reo_destination_ring) >> 2,
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_DST_RING,
		.reg_start = {
			HWIO_REO_R0_REO2SW1_RING_BASE_LSB_ADDR(
				SEQ_WCSS_UMAC_REO_REG_OFFSET),
			HWIO_REO_R2_REO2SW1_RING_HP_ADDR(
				SEQ_WCSS_UMAC_REO_REG_OFFSET)
		},
		.reg_size = {
			HWIO_REO_R0_REO2SW2_RING_BASE_LSB_ADDR(0) -
				HWIO_REO_R0_REO2SW1_RING_BASE_LSB_ADDR(0),
			HWIO_REO_R2_REO2SW1_RING_HP_ADDR(0) -
				HWIO_REO_R2_REO2SW2_RING_HP_ADDR(0),
		},
	},
	{ /* REO_EXCEPTION */
		/* Designating REO2TCL ring as exception ring. This ring is
		 * similar to other REO2SW rings though it is named as REO2TCL.
		 * Any of theREO2SW rings can be used as exception ring.
		 */
		.start_ring_id = HAL_SRNG_REO2TCL,
		.max_rings = 1,
		.entry_size = sizeof(struct reo_destination_ring) >> 2,
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_DST_RING,
		.reg_start = {
			HWIO_REO_R0_REO2TCL_RING_BASE_LSB_ADDR(
				SEQ_WCSS_UMAC_REO_REG_OFFSET),
			HWIO_REO_R2_REO2TCL_RING_HP_ADDR(
				SEQ_WCSS_UMAC_REO_REG_OFFSET)
		},
		/* Single ring - provide ring size if multiple rings of this
		 * type are supported */
		.reg_size = {},
	},
	{ /* REO_REINJECT */
		.start_ring_id = HAL_SRNG_SW2REO,
		.max_rings = 1,
		.entry_size = sizeof(struct reo_entrance_ring) >> 2,
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_SRC_RING,
		.reg_start = {
			HWIO_REO_R0_SW2REO_RING_BASE_LSB_ADDR(
				SEQ_WCSS_UMAC_REO_REG_OFFSET),
			HWIO_REO_R2_SW2REO_RING_HP_ADDR(
				SEQ_WCSS_UMAC_REO_REG_OFFSET)
		},
		/* Single ring - provide ring size if multiple rings of this
		 * type are supported */
		.reg_size = {},
	},
	{ /* REO_CMD */
		.start_ring_id = HAL_SRNG_REO_CMD,
		.max_rings = 1,
		.entry_size = (sizeof(struct tlv_32_hdr) +
			sizeof(struct reo_get_queue_stats)) >> 2,
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_SRC_RING,
		.reg_start = {
			HWIO_REO_R0_REO_CMD_RING_BASE_LSB_ADDR(
				SEQ_WCSS_UMAC_REO_REG_OFFSET),
			HWIO_REO_R2_REO_CMD_RING_HP_ADDR(
				SEQ_WCSS_UMAC_REO_REG_OFFSET),
		},
		/* Single ring - provide ring size if multiple rings of this
		 * type are supported */
		.reg_size = {},
	},
	{ /* REO_STATUS */
		.start_ring_id = HAL_SRNG_REO_STATUS,
		.max_rings = 1,
		.entry_size = (sizeof(struct tlv_32_hdr) +
			sizeof(struct reo_get_queue_stats_status)) >> 2,
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_DST_RING,
		.reg_start = {
			HWIO_REO_R0_REO_STATUS_RING_BASE_LSB_ADDR(
				SEQ_WCSS_UMAC_REO_REG_OFFSET),
			HWIO_REO_R2_REO_STATUS_RING_HP_ADDR(
				SEQ_WCSS_UMAC_REO_REG_OFFSET),
		},
		/* Single ring - provide ring size if multiple rings of this
		 * type are supported */
		.reg_size = {},
	},
	{ /* TCL_DATA */
		.start_ring_id = HAL_SRNG_SW2TCL1,
		.max_rings = 3,
		.entry_size = (sizeof(struct tlv_32_hdr) +
			sizeof(struct tcl_data_cmd)) >> 2,
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_SRC_RING,
		.reg_start = {
			HWIO_TCL_R0_SW2TCL1_RING_BASE_LSB_ADDR(
				SEQ_WCSS_UMAC_MAC_TCL_REG_OFFSET),
			HWIO_TCL_R2_SW2TCL1_RING_HP_ADDR(
				SEQ_WCSS_UMAC_MAC_TCL_REG_OFFSET),
		},
		.reg_size = {
			HWIO_TCL_R0_SW2TCL2_RING_BASE_LSB_ADDR(0) -
				HWIO_TCL_R0_SW2TCL1_RING_BASE_LSB_ADDR(0),
			HWIO_TCL_R2_SW2TCL2_RING_HP_ADDR(0) -
				HWIO_TCL_R2_SW2TCL1_RING_HP_ADDR(0),
		},
	},
	{ /* TCL_CMD */
		.start_ring_id = HAL_SRNG_SW2TCL_CMD,
		.max_rings = 1,
		.entry_size = (sizeof(struct tlv_32_hdr) +
			sizeof(struct tcl_gse_cmd)) >> 2,
		.lmac_ring =  FALSE,
		.ring_dir = HAL_SRNG_SRC_RING,
		.reg_start = {
			HWIO_TCL_R0_SW2TCL_CMD_RING_BASE_LSB_ADDR(
				SEQ_WCSS_UMAC_MAC_TCL_REG_OFFSET),
			HWIO_TCL_R2_SW2TCL_CMD_RING_HP_ADDR(
				SEQ_WCSS_UMAC_MAC_TCL_REG_OFFSET),
		},
		/* Single ring - provide ring size if multiple rings of this
		 * type are supported */
		.reg_size = {},
	},
	{ /* TCL_STATUS */
		.start_ring_id = HAL_SRNG_TCL_STATUS,
		.max_rings = 1,
		.entry_size = (sizeof(struct tlv_32_hdr) +
			sizeof(struct tcl_status_ring)) >> 2,
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_DST_RING,
		.reg_start = {
			HWIO_TCL_R0_TCL_STATUS1_RING_BASE_LSB_ADDR(
				SEQ_WCSS_UMAC_MAC_TCL_REG_OFFSET),
			HWIO_TCL_R2_TCL_STATUS1_RING_HP_ADDR(
				SEQ_WCSS_UMAC_MAC_TCL_REG_OFFSET),
		},
		/* Single ring - provide ring size if multiple rings of this
		 * type are supported */
		.reg_size = {},
	},
	{ /* CE_SRC */
		.start_ring_id = HAL_SRNG_CE_0_SRC,
		.max_rings = 12,
		.entry_size = sizeof(struct ce_src_desc) >> 2,
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_SRC_RING,
		.reg_start = {
			HWIO_WFSS_CE_CHANNEL_DST_R0_DEST_RING_BASE_LSB_ADDR(
				SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_0_CHANNEL_SRC_REG_OFFSET),
			HWIO_WFSS_CE_CHANNEL_DST_R2_DEST_RING_HP_ADDR(
				SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_0_CHANNEL_SRC_REG_OFFSET),
		},
		.reg_size = {
			SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_1_CHANNEL_SRC_REG_OFFSET -
				SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_0_CHANNEL_SRC_REG_OFFSET,
			SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_1_CHANNEL_SRC_REG_OFFSET -
				SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_0_CHANNEL_SRC_REG_OFFSET,
		},
	},
	{ /* CE_DST */
		.start_ring_id = HAL_SRNG_CE_0_DST,
		.max_rings = 12,
		.entry_size = 8 >> 2,
		/*TODO: entry_size above should actually be
		 * sizeof(struct ce_dst_desc) >> 2, but couldn't find definition
		 * of struct ce_dst_desc in HW header files
		 */
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_SRC_RING,
		.reg_start = {
			HWIO_WFSS_CE_CHANNEL_DST_R0_DEST_RING_BASE_LSB_ADDR(
				SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_0_CHANNEL_DST_REG_OFFSET),
			HWIO_WFSS_CE_CHANNEL_DST_R2_DEST_RING_HP_ADDR(
				SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_0_CHANNEL_DST_REG_OFFSET),
		},
		.reg_size = {
			SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_1_CHANNEL_DST_REG_OFFSET -
				SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_0_CHANNEL_DST_REG_OFFSET,
			SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_1_CHANNEL_DST_REG_OFFSET -
				SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_0_CHANNEL_DST_REG_OFFSET,
		},
	},
	{ /* CE_DST_STATUS */
		.start_ring_id = HAL_SRNG_CE_0_DST_STATUS,
		.max_rings = 12,
		.entry_size = sizeof(struct ce_stat_desc) >> 2,
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_DST_RING,
		.reg_start = {
			HWIO_WFSS_CE_CHANNEL_DST_R0_STATUS_RING_BASE_LSB_ADDR(
				SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_0_CHANNEL_DST_REG_OFFSET),
			HWIO_WFSS_CE_CHANNEL_DST_R2_STATUS_RING_HP_ADDR(
				SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_0_CHANNEL_DST_REG_OFFSET),
		},
			/* TODO: check destination status ring registers */
		.reg_size = {
			SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_1_CHANNEL_DST_REG_OFFSET -
				SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_0_CHANNEL_DST_REG_OFFSET,
			SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_1_CHANNEL_DST_REG_OFFSET -
				SEQ_WCSS_UMAC_WFSS_CE_0_REG_WFSS_CE_0_CHANNEL_DST_REG_OFFSET,
		},
	},
	{ /* WBM_IDLE_LINK */
		.start_ring_id = HAL_SRNG_WBM_IDLE_LINK,
		.max_rings = 1,
		.entry_size = sizeof(struct wbm_link_descriptor_ring) >> 2,
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_SRC_RING,
		.reg_start = {
			HWIO_WBM_R0_WBM_IDLE_LINK_RING_BASE_LSB_ADDR(SEQ_WCSS_UMAC_WBM_REG_OFFSET),
			HWIO_WBM_R2_WBM_IDLE_LINK_RING_HP_ADDR(SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		},
		/* Single ring - provide ring size if multiple rings of this
		 * type are supported */
		.reg_size = {},
	},
	{ /* SW2WBM_RELEASE */
		.start_ring_id = HAL_SRNG_WBM_SW_RELEASE,
		.max_rings = 1,
		.entry_size = sizeof(struct wbm_release_ring) >> 2,
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_SRC_RING,
		.reg_start = {
			HWIO_WBM_R0_SW_RELEASE_RING_BASE_LSB_ADDR(SEQ_WCSS_UMAC_WBM_REG_OFFSET),
			HWIO_WBM_R2_SW_RELEASE_RING_HP_ADDR(SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		},
		/* Single ring - provide ring size if multiple rings of this
		 * type are supported */
		.reg_size = {},
	},
	{ /* WBM2SW_RELEASE */
		.start_ring_id = HAL_SRNG_WBM2SW0_RELEASE,
		.max_rings = 4,
		.entry_size = sizeof(struct wbm_release_ring) >> 2,
		.lmac_ring = FALSE,
		.ring_dir = HAL_SRNG_DST_RING,
		.reg_start = {
			HWIO_WBM_R0_WBM2SW0_RELEASE_RING_BASE_LSB_ADDR(SEQ_WCSS_UMAC_WBM_REG_OFFSET),
			HWIO_WBM_R2_WBM2SW0_RELEASE_RING_HP_ADDR(SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		},
		.reg_size = {
			HWIO_WBM_R0_WBM2SW1_RELEASE_RING_BASE_LSB_ADDR(SEQ_WCSS_UMAC_WBM_REG_OFFSET) -
				HWIO_WBM_R0_WBM2SW0_RELEASE_RING_BASE_LSB_ADDR(SEQ_WCSS_UMAC_WBM_REG_OFFSET),
			HWIO_WBM_R2_WBM2SW1_RELEASE_RING_HP_ADDR(SEQ_WCSS_UMAC_WBM_REG_OFFSET) -
				HWIO_WBM_R2_WBM2SW0_RELEASE_RING_HP_ADDR(SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		},
	},
	{ /* RXDMA_BUF */
		.start_ring_id = HAL_SRNG_WMAC1_SW2RXDMA0_BUF,
		.max_rings = 2,
		/* TODO: Check if the additional IPA buffer ring needs to be
		 * setup here (in which case max_rings should be set to 2),
		 * or it will be setup by IPA host driver
		 */
		.entry_size = sizeof(struct wbm_buffer_ring) >> 2,
		.lmac_ring = TRUE,
		.ring_dir = HAL_SRNG_SRC_RING,
		/* reg_start is not set because LMAC rings are not accessed
		 * from host
		 */
		.reg_start = {},
		.reg_size = {},
	},
	{ /* RXDMA_DST */
		.start_ring_id = HAL_SRNG_WMAC1_RXDMA2SW0,
		.max_rings = 1,
		.entry_size = sizeof(struct reo_entrance_ring) >> 2,
		.lmac_ring =  TRUE,
		.ring_dir = HAL_SRNG_DST_RING,
		/* reg_start is not set because LMAC rings are not accessed
		 * from host
		 */
		.reg_start = {},
		.reg_size = {},
	},
	{ /* RXDMA_MONITOR_BUF */
		.start_ring_id = HAL_SRNG_WMAC1_SW2RXDMA2_BUF,
		.max_rings = 1,
		.entry_size = sizeof(struct wbm_buffer_ring) >> 2,
		.lmac_ring = TRUE,
		.ring_dir = HAL_SRNG_SRC_RING,
		/* reg_start is not set because LMAC rings are not accessed
		 * from host
		 */
		.reg_start = {},
		.reg_size = {},
	},
	{ /* RXDMA_MONITOR_STATUS */
		.start_ring_id = HAL_SRNG_WMAC1_SW2RXDMA1_STATBUF,
		.max_rings = 1,
		.entry_size = sizeof(struct wbm_buffer_ring) >> 2,
		.lmac_ring = TRUE,
		.ring_dir = HAL_SRNG_SRC_RING,
		/* reg_start is not set because LMAC rings are not accessed
		 * from host
		 */
		.reg_start = {},
		.reg_size = {},
	},
	{ /* RXDMA_MONITOR_DST */
		.start_ring_id = HAL_SRNG_WMAC1_RXDMA2SW1,
		.max_rings = 1,
		.entry_size = sizeof(struct reo_entrance_ring) >> 2,
		.lmac_ring = TRUE,
		.ring_dir = HAL_SRNG_DST_RING,
		/* reg_start is not set because LMAC rings are not accessed
		 * from host
		 */
		.reg_start = {},
		.reg_size = {},
	},
};

/**
 * hal_attach - Initalize HAL layer
 * @hif_handle: Opaque HIF handle
 * @qdf_dev: QDF device
 *
 * Return: Opaque HAL SOC handle
 *		 NULL on failure (if given ring is not available)
 *
 * This function should be called as part of HIF initialization (for accessing
 * copy engines). DP layer will get hal_soc handle using hif_get_hal_handle()
 *
 */
void *hal_attach(void *hif_handle, qdf_device_t qdf_dev)
{
	struct hal_soc *hal;
	int i;

	hal = qdf_mem_malloc(sizeof(*hal));

	if (!hal) {
		QDF_TRACE(QDF_MODULE_ID_TXRX, QDF_TRACE_LEVEL_ERROR,
			"%s: hal_soc allocation failed\n", __func__);
		goto fail0;
	}
	hal->hif_handle = hif_handle;
	hal->dev_base_addr = hif_get_dev_ba(hif_handle);
	hal->qdf_dev = qdf_dev;
	hal->shadow_rdptr_mem_vaddr = (uint32_t *)qdf_mem_alloc_consistent(
		qdf_dev, qdf_dev->dev, sizeof(*(hal->shadow_rdptr_mem_vaddr)) *
		HAL_SRNG_ID_MAX, &(hal->shadow_rdptr_mem_paddr));
	if (!hal->shadow_rdptr_mem_paddr) {
		QDF_TRACE(QDF_MODULE_ID_TXRX, QDF_TRACE_LEVEL_ERROR,
			"%s: hal->shadow_rdptr_mem_paddr allocation failed\n",
			__func__);
		goto fail1;
	}

	hal->shadow_wrptr_mem_vaddr =
		(uint32_t *)qdf_mem_alloc_consistent(qdf_dev, qdf_dev->dev,
		sizeof(*(hal->shadow_wrptr_mem_vaddr)) * HAL_MAX_LMAC_RINGS,
		&(hal->shadow_wrptr_mem_paddr));
	if (!hal->shadow_wrptr_mem_vaddr) {
		QDF_TRACE(QDF_MODULE_ID_TXRX, QDF_TRACE_LEVEL_ERROR,
			"%s: hal->shadow_wrptr_mem_vaddr allocation failed\n",
			__func__);
		goto fail2;
	}

	for (i = 0; i < HAL_SRNG_ID_MAX; i++) {
		hal->srng_list[i].initialized = 0;
		hal->srng_list[i].ring_id = i;
	}

	return (void *)hal;

fail2:
	qdf_mem_free_consistent(hal->qdf_dev, NULL,
		sizeof(*(hal->shadow_rdptr_mem_vaddr)) * HAL_SRNG_ID_MAX,
		hal->shadow_rdptr_mem_vaddr, hal->shadow_rdptr_mem_paddr, 0);
fail1:
	qdf_mem_free(hal);
fail0:
	return NULL;
}

/**
 * hal_detach - Detach HAL layer
 * @hal_soc: HAL SOC handle
 *
 * Return: Opaque HAL SOC handle
 *		 NULL on failure (if given ring is not available)
 *
 * This function should be called as part of HIF initialization (for accessing
 * copy engines). DP layer will get hal_soc handle using hif_get_hal_handle()
 *
 */
extern void hal_detach(void *hal_soc)
{
	struct hal_soc *hal = (struct hal_soc *)hal_soc;

	qdf_mem_free_consistent(hal->qdf_dev, NULL,
		sizeof(*(hal->shadow_rdptr_mem_vaddr)) * HAL_SRNG_ID_MAX,
		hal->shadow_rdptr_mem_vaddr, hal->shadow_rdptr_mem_paddr, 0);
	qdf_mem_free_consistent(hal->qdf_dev, NULL,
		sizeof(*(hal->shadow_wrptr_mem_vaddr)) * HAL_MAX_LMAC_RINGS,
		hal->shadow_wrptr_mem_vaddr, hal->shadow_wrptr_mem_paddr, 0);
	qdf_mem_free(hal);

	return;
}



/**
 * hal_srng_src_hw_init - Private function to initialize SRNG
 * source ring HW
 * @hal_soc: HAL SOC handle
 * @srng: SRNG ring pointer
 */
static inline void hal_srng_src_hw_init(struct hal_soc *hal,
	struct hal_srng *srng)
{
	uint32_t reg_val = 0;
	uint64_t tp_addr = 0;

	SRNG_SRC_REG_WRITE(srng, BASE_LSB, srng->ring_base_paddr & 0xffffffff);
	reg_val = SRNG_SM(SRNG_SRC_FLD(BASE_MSB, RING_BASE_ADDR_MSB),
		((uint64_t)(srng->ring_base_paddr) >> 32)) |
		SRNG_SM(SRNG_SRC_FLD(BASE_MSB, RING_SIZE),
		srng->entry_size * srng->num_entries);
	SRNG_SRC_REG_WRITE(srng, BASE_MSB, reg_val);

	reg_val = SRNG_SM(SRNG_SRC_FLD(ID, RING_ID), srng->ring_id) |
		SRNG_SM(SRNG_SRC_FLD(ID, ENTRY_SIZE), srng->entry_size);
	SRNG_SRC_REG_WRITE(srng, ID, reg_val);

	reg_val = ((srng->flags & HAL_SRNG_DATA_TLV_SWAP) ?
			SRNG_SM(SRNG_SRC_FLD(MISC, DATA_TLV_SWAP_BIT), 1) : 0) |
			((srng->flags & HAL_SRNG_RING_PTR_SWAP) ?
			SRNG_SM(SRNG_SRC_FLD(MISC, HOST_FW_SWAP_BIT), 1) : 0) |
			((srng->flags & HAL_SRNG_MSI_SWAP) ?
			SRNG_SM(SRNG_SRC_FLD(MISC, MSI_SWAP_BIT), 1) : 0);

	/* Loop count is not used for SRC rings */
	reg_val |= SRNG_SM(SRNG_SRC_FLD(MISC, LOOPCNT_DISABLE), 1);

	SRNG_SRC_REG_WRITE(srng, MISC, reg_val);

	/**
	 * Interrupt setup:
	 * Default interrupt mode is 'pulse'. Need to setup SW_INTERRUPT_MODE
	 * if level mode is required
	 */
	reg_val = 0;
	if (srng->intr_timer_thres_us) {
		reg_val |= SRNG_SM(SRNG_SRC_FLD(CONSUMER_INT_SETUP_IX0,
			INTERRUPT_TIMER_THRESHOLD),
			srng->intr_timer_thres_us >> 3);
	}

	if (srng->intr_batch_cntr_thres_entries) {
		reg_val |= SRNG_SM(SRNG_SRC_FLD(CONSUMER_INT_SETUP_IX0,
			BATCH_COUNTER_THRESHOLD),
			srng->intr_batch_cntr_thres_entries *
			srng->entry_size);
	}
	SRNG_SRC_REG_WRITE(srng, CONSUMER_INT_SETUP_IX0, reg_val);

	if (srng->flags & HAL_SRNG_LOW_THRES_INTR_ENABLE) {
		reg_val |= SRNG_SM(SRNG_SRC_FLD(CONSUMER_INT_SETUP_IX1,
			LOW_THRESHOLD), srng->u.src_ring.low_threshold);
	}

	SRNG_SRC_REG_WRITE(srng, CONSUMER_INT_SETUP_IX1, reg_val);

	if (srng->flags & HAL_SRNG_MSI_INTR) {
		SRNG_SRC_REG_WRITE(srng, MSI1_BASE_LSB,
			srng->msi_addr & 0xffffffff);
		reg_val = SRNG_SM(SRNG_SRC_FLD(MSI1_BASE_MSB, ADDR),
			(uint64_t)(srng->msi_addr) >> 32) |
			SRNG_SM(SRNG_SRC_FLD(MSI1_BASE_MSB,
			MSI1_ENABLE), 1);
		SRNG_SRC_REG_WRITE(srng, MSI1_BASE_MSB, reg_val);
		SRNG_SRC_REG_WRITE(srng, MSI1_DATA, srng->msi_data);
	}

	tp_addr = (uint64_t)(hal->shadow_rdptr_mem_paddr +
		((unsigned long)(srng->u.src_ring.tp_addr) -
		(unsigned long)(hal->shadow_rdptr_mem_vaddr)));
	SRNG_SRC_REG_WRITE(srng, TP_ADDR_LSB, tp_addr & 0xffffffff);
	SRNG_SRC_REG_WRITE(srng, TP_ADDR_MSB, tp_addr >> 32);

	/* Initilaize head and tail pointers to indicate ring is empty */
	SRNG_SRC_REG_WRITE(srng, HP, 0);
	SRNG_SRC_REG_WRITE(srng, TP, 0);
	*(srng->u.src_ring.tp_addr) = 0;
}

/**
 * hal_srng_dst_hw_init - Private function to initialize SRNG
 * destination ring HW
 * @hal_soc: HAL SOC handle
 * @srng: SRNG ring pointer
 */
static inline void hal_srng_dst_hw_init(struct hal_soc *hal,
	struct hal_srng *srng)
{
	uint32_t reg_val = 0;
	uint64_t hp_addr = 0;

	SRNG_DST_REG_WRITE(srng, BASE_LSB, srng->ring_base_paddr & 0xffffffff);
	reg_val = SRNG_SM(SRNG_DST_FLD(BASE_MSB, RING_BASE_ADDR_MSB),
		((uint64_t)(srng->ring_base_paddr) >> 32)) |
		SRNG_SM(SRNG_DST_FLD(BASE_MSB, RING_SIZE),
		srng->entry_size * srng->num_entries);
	SRNG_DST_REG_WRITE(srng, BASE_MSB, reg_val);

	reg_val = SRNG_SM(SRNG_DST_FLD(ID, RING_ID), srng->ring_id) |
		SRNG_SM(SRNG_DST_FLD(ID, ENTRY_SIZE), srng->entry_size);
	SRNG_DST_REG_WRITE(srng, ID, reg_val);

	reg_val = ((srng->flags & HAL_SRNG_DATA_TLV_SWAP) ?
			SRNG_SM(SRNG_DST_FLD(MISC, DATA_TLV_SWAP_BIT), 1) : 0) |
			((srng->flags & HAL_SRNG_RING_PTR_SWAP) ?
			SRNG_SM(SRNG_DST_FLD(MISC, HOST_FW_SWAP_BIT), 1) : 0) |
			((srng->flags & HAL_SRNG_MSI_SWAP) ?
			SRNG_SM(SRNG_DST_FLD(MISC, MSI_SWAP_BIT), 1) : 0);

	SRNG_DST_REG_WRITE(srng, MISC, reg_val);

	/**
	 * Interrupt setup:
	 * Default interrupt mode is 'pulse'. Need to setup SW_INTERRUPT_MODE
	 * if level mode is required
	 */
	reg_val = 0;
	if (srng->intr_timer_thres_us) {
		reg_val |= SRNG_SM(SRNG_DST_FLD(PRODUCER_INT_SETUP,
			INTERRUPT_TIMER_THRESHOLD),
			srng->intr_timer_thres_us >> 3);
	}

	if (srng->intr_batch_cntr_thres_entries) {
		reg_val |= SRNG_SM(SRNG_DST_FLD(PRODUCER_INT_SETUP,
			BATCH_COUNTER_THRESHOLD),
			srng->intr_batch_cntr_thres_entries *
			srng->entry_size);
	}
	SRNG_DST_REG_WRITE(srng, PRODUCER_INT_SETUP, reg_val);

	if (srng->flags & HAL_SRNG_MSI_INTR) {
		SRNG_DST_REG_WRITE(srng, MSI1_BASE_LSB,
			srng->msi_addr & 0xffffffff);
		reg_val = SRNG_SM(SRNG_DST_FLD(MSI1_BASE_MSB, ADDR),
			(uint64_t)(srng->msi_addr) >> 32) |
			SRNG_SM(SRNG_DST_FLD(MSI1_BASE_MSB,
			MSI1_ENABLE), 1);
		SRNG_DST_REG_WRITE(srng, MSI1_BASE_MSB, reg_val);
		SRNG_DST_REG_WRITE(srng, MSI1_DATA, srng->msi_data);
	}

	hp_addr = (uint64_t)(hal->shadow_rdptr_mem_paddr +
		((unsigned long)(srng->u.dst_ring.hp_addr) -
		(unsigned long)(hal->shadow_rdptr_mem_vaddr)));
	SRNG_DST_REG_WRITE(srng, HP_ADDR_LSB, hp_addr & 0xffffffff);
	SRNG_DST_REG_WRITE(srng, HP_ADDR_MSB, hp_addr >> 32);

	/* Initilaize head and tail pointers to indicate ring is empty */
	SRNG_DST_REG_WRITE(srng, HP, 0);
	SRNG_DST_REG_WRITE(srng, TP, 0);
	*(srng->u.dst_ring.hp_addr) = 0;
}

/**
 * hal_srng_hw_init - Private function to initialize SRNG HW
 * @hal_soc: HAL SOC handle
 * @srng: SRNG ring pointer
 */
static inline void hal_srng_hw_init(struct hal_soc *hal,
	struct hal_srng *srng)
{
	if (srng->ring_dir == HAL_SRNG_SRC_RING)
		hal_srng_src_hw_init(hal, srng);
	else
		hal_srng_dst_hw_init(hal, srng);
}

/**
 * hal_srng_setup - Initalize HW SRNG ring.
 * @hal_soc: Opaque HAL SOC handle
 * @ring_type: one of the types from hal_ring_type
 * @ring_num: Ring number if there are multiple rings of same type (staring
 * from 0)
 * @mac_id: valid MAC Id should be passed if ring type is one of lmac rings
 * @ring_params: SRNG ring params in hal_srng_params structure.

 * Callers are expected to allocate contiguous ring memory of size
 * 'num_entries * entry_size' bytes and pass the physical and virtual base
 * addresses through 'ring_base_paddr' and 'ring_base_vaddr' in
 * hal_srng_params structure. Ring base address should be 8 byte aligned
 * and size of each ring entry should be queried using the API
 * hal_srng_get_entrysize
 *
 * Return: Opaque pointer to ring on success
 *		 NULL on failure (if given ring is not available)
 */
void *hal_srng_setup(void *hal_soc, int ring_type, int ring_num,
	int mac_id, struct hal_srng_params *ring_params)
{
	int ring_id;
	struct hal_soc *hal = (struct hal_soc *)hal_soc;
	struct hal_srng *srng;
	struct hal_hw_srng_config *ring_config =
		HAL_SRNG_CONFIG(hal, ring_type);
	void *dev_base_addr;
	int i;

	if (ring_num >= ring_config->max_rings) {
		QDF_TRACE(QDF_MODULE_ID_TXRX, QDF_TRACE_LEVEL_ERROR,
			"%s: ring_num exceeded maximum no. of supported rings\n",
			__func__);
		return NULL;
	}

	if (ring_config->lmac_ring) {
		ring_id = ring_config->start_ring_id + ring_num +
			(mac_id * HAL_MAX_RINGS_PER_LMAC);
	} else {
		ring_id = ring_config->start_ring_id + ring_num;
	}

	/* TODO: Should we allocate srng structures dynamically? */
	srng = &(hal->srng_list[ring_id]);

	if (srng->initialized) {
		QDF_TRACE(QDF_MODULE_ID_TXRX, QDF_TRACE_LEVEL_ERROR,
			"%s: Ring (ring_type, ring_num) already initialized\n",
			__func__);
		return NULL;
	}

	dev_base_addr = hal->dev_base_addr;
	srng->ring_id = ring_id;
	srng->ring_dir = ring_config->ring_dir;
	srng->ring_base_paddr = ring_params->ring_base_paddr;
	srng->ring_base_vaddr = ring_params->ring_base_vaddr;
	srng->entry_size = ring_config->entry_size;
	srng->num_entries = ring_params->num_entries;
	srng->ring_size = srng->num_entries * srng->entry_size;
	srng->ring_size_mask = srng->ring_size - 1;
	srng->msi_addr = ring_params->msi_addr;
	srng->msi_data = ring_params->msi_data;
	srng->intr_timer_thres_us = ring_params->intr_timer_thres_us;
	srng->intr_batch_cntr_thres_entries =
		ring_params->intr_batch_cntr_thres_entries;

	for (i = 0 ; i < MAX_SRNG_REG_GROUPS; i++) {
		srng->hwreg_base[i] = dev_base_addr + ring_config->reg_start[i]
			+ (ring_num * ring_config->reg_size[i]);
	}

	/* Zero out the entire ring memory */
	qdf_mem_zero(srng->ring_base_vaddr, (srng->entry_size *
		srng->num_entries) << 2);

	srng->flags = ring_params->flags;
#ifdef BIG_ENDIAN_HOST
		/* TODO: See if we should we get these flags from caller */
	srng->flags |= HAL_SRNG_DATA_TLV_SWAP;
	srng->flags |= HAL_SRNG_MSI_SWAP;
	srng->flags |= HAL_SRNG_RING_PTR_SWAP;
#endif
	if (srng->ring_dir == HAL_SRNG_SRC_RING) {
		srng->u.src_ring.hp = 0;
		srng->u.src_ring.reap_hp = srng->ring_size -
			srng->entry_size;
		srng->u.src_ring.tp_addr =
			&(hal->shadow_rdptr_mem_vaddr[ring_id]);
		srng->u.src_ring.low_threshold = ring_params->low_threshold;
		if (ring_config->lmac_ring) {
			/* For LMAC rings, head pointer updates will be done
			 * through FW by writing to a shared memory location
			 */
			srng->u.src_ring.hp_addr =
				&(hal->shadow_wrptr_mem_vaddr[ring_id -
					HAL_SRNG_LMAC1_ID_START]);
			srng->flags |= HAL_SRNG_LMAC_RING;
		} else {
			srng->u.src_ring.hp_addr = SRNG_SRC_ADDR(srng, HP);
		}
	} else {
		/* During initialization loop count in all the descriptors
		 * will be set to zero, and HW will set it to 1 on completing
		 * descriptor update in first loop, and increments it by 1 on
		 * subsequent loops (loop count wraps around after reaching
		 * 0xffff). The 'loop_cnt' in SW ring state is the expected
		 * loop count in descriptors updated by HW (to be processed
		 * by SW).
		 */
		srng->u.dst_ring.loop_cnt = 1;
		srng->u.dst_ring.tp = 0;
		srng->u.dst_ring.hp_addr =
			&(hal->shadow_rdptr_mem_vaddr[ring_id]);
		if (ring_config->lmac_ring) {
			/* For LMAC rings, tail pointer updates will be done
			 * through FW by writing to a shared memory location
			 */
			srng->u.dst_ring.tp_addr =
				&(hal->shadow_wrptr_mem_vaddr[ring_id -
				HAL_SRNG_LMAC1_ID_START]);
			srng->flags |= HAL_SRNG_LMAC_RING;
		} else {
			srng->u.dst_ring.tp_addr = SRNG_DST_ADDR(srng, TP);
		}
	}

	if (!(ring_config->lmac_ring))
		hal_srng_hw_init(hal, srng);

	SRNG_LOCK_INIT(&srng->lock);

	return (void *)srng;
}

/**
 * hal_srng_cleanup - Deinitialize HW SRNG ring.
 * @hal_soc: Opaque HAL SOC handle
 * @hal_srng: Opaque HAL SRNG pointer
 */
void hal_srng_cleanup(void *hal_soc, void *hal_srng)
{
	struct hal_srng *srng = (struct hal_srng *)hal_srng;
	SRNG_LOCK_DESTROY(&srng->lock);
	srng->initialized = 0;
}

/**
 * hal_srng_get_entrysize - Returns size of ring entry in bytes
 * @hal_soc: Opaque HAL SOC handle
 * @ring_type: one of the types from hal_ring_type
 *
 */
uint32_t hal_srng_get_entrysize(void *hal_soc, int ring_type)
{
	struct hal_hw_srng_config *ring_config =
		HAL_SRNG_CONFIG(hal, ring_type);
	return ring_config->entry_size << 2;
}

/**
 * hal_get_srng_params - Retreive SRNG parameters for a given ring from HAL
 *
 * @hal_soc: Opaque HAL SOC handle
 * @hal_ring: Ring pointer (Source or Destination ring)
 * @ring_params: SRNG parameters will be returned through this structure
 */
extern void hal_get_srng_params(void *hal_soc, void *hal_ring,
	struct hal_srng_params *ring_params)
{
	struct hal_srng *srng = (struct hal_srng *)hal_ring;

	ring_params->ring_base_paddr = srng->ring_base_paddr;
	ring_params->ring_base_vaddr = srng->ring_base_vaddr;
	ring_params->num_entries = srng->num_entries;
	ring_params->msi_addr = srng->msi_addr;
	ring_params->msi_data = srng->msi_data;
	ring_params->intr_timer_thres_us = srng->intr_timer_thres_us;
	ring_params->intr_batch_cntr_thres_entries =
		srng->intr_batch_cntr_thres_entries;
	ring_params->low_threshold = srng->u.src_ring.low_threshold;
	ring_params->flags = srng->flags;
	ring_params->ring_id = srng->ring_id;
}