36637cf177
Added ipq5332 target header files under qca5332 to make fw-api project compatible to host. Change-Id: Iee6b3f2a809f31e62b45a0f6e9a7cbb66e070fa0
1618 line
67 KiB
C
1618 line
67 KiB
C
|
|
/* Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#ifndef _TX_FES_SETUP_H_
|
|
#define _TX_FES_SETUP_H_
|
|
#if !defined(__ASSEMBLER__)
|
|
#endif
|
|
|
|
#define NUM_OF_DWORDS_TX_FES_SETUP 10
|
|
|
|
#define NUM_OF_QWORDS_TX_FES_SETUP 5
|
|
|
|
|
|
struct tx_fes_setup {
|
|
#ifndef WIFI_BIT_ORDER_BIG_ENDIAN
|
|
uint32_t schedule_id : 32; // [31:0]
|
|
uint32_t fes_in_11ax_trigger_response_config : 1, // [0:0]
|
|
bo_based_tid_aggregation_limit : 4, // [4:1]
|
|
ranging : 1, // [5:5]
|
|
expect_i2r_lmr : 1, // [6:6]
|
|
transmit_start_reason : 3, // [9:7]
|
|
use_alt_power_sr : 1, // [10:10]
|
|
static_2_pwr_mode_status : 1, // [11:11]
|
|
obss_srg_opport_transmit_status : 1, // [12:12]
|
|
srp_based_transmit_status : 1, // [13:13]
|
|
obss_pd_based_transmit_status : 1, // [14:14]
|
|
puncture_from_all_allowed_modes : 1, // [15:15]
|
|
schedule_cmd_ring_id : 5, // [20:16]
|
|
fes_control_mode : 2, // [22:21]
|
|
number_of_users : 6, // [28:23]
|
|
mu_type : 1, // [29:29]
|
|
ofdma_triggered_response : 1, // [30:30]
|
|
response_to_response_cmd : 1; // [31:31]
|
|
uint32_t schedule_try : 4, // [3:0]
|
|
ndp_frame : 2, // [5:4]
|
|
txbf : 1, // [6:6]
|
|
allow_txop_exceed_in_1st_pkt : 1, // [7:7]
|
|
ignore_bw_available : 1, // [8:8]
|
|
ignore_tbtt : 1, // [9:9]
|
|
static_bandwidth : 3, // [12:10]
|
|
set_txop_duration_all_ones : 1, // [13:13]
|
|
transmission_contains_mu_rts : 1, // [14:14]
|
|
bw_restricted_frames_embedded : 1, // [15:15]
|
|
ast_index : 16; // [31:16]
|
|
uint32_t cv_id : 8, // [7:0]
|
|
trigger_resp_txpdu_ppdu_boundary : 2, // [9:8]
|
|
rxpcu_setup_complete_present : 1, // [10:10]
|
|
rbo_must_have_data_user_limit : 4, // [14:11]
|
|
mu_ndp : 1, // [15:15]
|
|
bf_type : 2, // [17:16]
|
|
cbf_nc_index_mask : 1, // [18:18]
|
|
cbf_nc_index : 3, // [21:19]
|
|
cbf_nr_index_mask : 1, // [22:22]
|
|
cbf_nr_index : 3, // [25:23]
|
|
secure_ranging_ista : 1, // [26:26]
|
|
ndpa : 1, // [27:27]
|
|
wait_sifs : 2, // [29:28]
|
|
cbf_feedback_type_mask : 1, // [30:30]
|
|
cbf_feedback_type : 1; // [31:31]
|
|
uint32_t cbf_sounding_token : 6, // [5:0]
|
|
cbf_sounding_token_mask : 1, // [6:6]
|
|
cbf_bw_mask : 1, // [7:7]
|
|
cbf_bw : 3, // [10:8]
|
|
use_static_bw : 1, // [11:11]
|
|
coex_nack_count : 5, // [16:12]
|
|
sch_tx_burst_ongoing : 1, // [17:17]
|
|
gen_tqm_update_mpdu_count_tlv : 1, // [18:18]
|
|
transmit_vif : 4, // [22:19]
|
|
optimal_bw_retry_count : 4, // [26:23]
|
|
fes_continuation_ratio_threshold : 5; // [31:27]
|
|
uint32_t transmit_cca_bitmap : 32; // [31:0]
|
|
uint32_t tb_ranging : 1, // [0:0]
|
|
ranging_trigger_subtype : 4, // [4:1]
|
|
min_cts2self_count : 4, // [8:5]
|
|
max_cts2self_count : 4, // [12:9]
|
|
wifi_radar_enable : 1, // [13:13]
|
|
reserved_6a : 18; // [31:14]
|
|
uint32_t monitor_override_sta_31_0 : 32; // [31:0]
|
|
uint32_t monitor_override_sta_36_32 : 5, // [4:0]
|
|
reserved_8a : 27; // [31:5]
|
|
uint32_t fw2sw_info : 32; // [31:0]
|
|
#else
|
|
uint32_t schedule_id : 32; // [31:0]
|
|
uint32_t response_to_response_cmd : 1, // [31:31]
|
|
ofdma_triggered_response : 1, // [30:30]
|
|
mu_type : 1, // [29:29]
|
|
number_of_users : 6, // [28:23]
|
|
fes_control_mode : 2, // [22:21]
|
|
schedule_cmd_ring_id : 5, // [20:16]
|
|
puncture_from_all_allowed_modes : 1, // [15:15]
|
|
obss_pd_based_transmit_status : 1, // [14:14]
|
|
srp_based_transmit_status : 1, // [13:13]
|
|
obss_srg_opport_transmit_status : 1, // [12:12]
|
|
static_2_pwr_mode_status : 1, // [11:11]
|
|
use_alt_power_sr : 1, // [10:10]
|
|
transmit_start_reason : 3, // [9:7]
|
|
expect_i2r_lmr : 1, // [6:6]
|
|
ranging : 1, // [5:5]
|
|
bo_based_tid_aggregation_limit : 4, // [4:1]
|
|
fes_in_11ax_trigger_response_config : 1; // [0:0]
|
|
uint32_t ast_index : 16, // [31:16]
|
|
bw_restricted_frames_embedded : 1, // [15:15]
|
|
transmission_contains_mu_rts : 1, // [14:14]
|
|
set_txop_duration_all_ones : 1, // [13:13]
|
|
static_bandwidth : 3, // [12:10]
|
|
ignore_tbtt : 1, // [9:9]
|
|
ignore_bw_available : 1, // [8:8]
|
|
allow_txop_exceed_in_1st_pkt : 1, // [7:7]
|
|
txbf : 1, // [6:6]
|
|
ndp_frame : 2, // [5:4]
|
|
schedule_try : 4; // [3:0]
|
|
uint32_t cbf_feedback_type : 1, // [31:31]
|
|
cbf_feedback_type_mask : 1, // [30:30]
|
|
wait_sifs : 2, // [29:28]
|
|
ndpa : 1, // [27:27]
|
|
secure_ranging_ista : 1, // [26:26]
|
|
cbf_nr_index : 3, // [25:23]
|
|
cbf_nr_index_mask : 1, // [22:22]
|
|
cbf_nc_index : 3, // [21:19]
|
|
cbf_nc_index_mask : 1, // [18:18]
|
|
bf_type : 2, // [17:16]
|
|
mu_ndp : 1, // [15:15]
|
|
rbo_must_have_data_user_limit : 4, // [14:11]
|
|
rxpcu_setup_complete_present : 1, // [10:10]
|
|
trigger_resp_txpdu_ppdu_boundary : 2, // [9:8]
|
|
cv_id : 8; // [7:0]
|
|
uint32_t fes_continuation_ratio_threshold : 5, // [31:27]
|
|
optimal_bw_retry_count : 4, // [26:23]
|
|
transmit_vif : 4, // [22:19]
|
|
gen_tqm_update_mpdu_count_tlv : 1, // [18:18]
|
|
sch_tx_burst_ongoing : 1, // [17:17]
|
|
coex_nack_count : 5, // [16:12]
|
|
use_static_bw : 1, // [11:11]
|
|
cbf_bw : 3, // [10:8]
|
|
cbf_bw_mask : 1, // [7:7]
|
|
cbf_sounding_token_mask : 1, // [6:6]
|
|
cbf_sounding_token : 6; // [5:0]
|
|
uint32_t transmit_cca_bitmap : 32; // [31:0]
|
|
uint32_t reserved_6a : 18, // [31:14]
|
|
wifi_radar_enable : 1, // [13:13]
|
|
max_cts2self_count : 4, // [12:9]
|
|
min_cts2self_count : 4, // [8:5]
|
|
ranging_trigger_subtype : 4, // [4:1]
|
|
tb_ranging : 1; // [0:0]
|
|
uint32_t monitor_override_sta_31_0 : 32; // [31:0]
|
|
uint32_t reserved_8a : 27, // [31:5]
|
|
monitor_override_sta_36_32 : 5; // [4:0]
|
|
uint32_t fw2sw_info : 32; // [31:0]
|
|
#endif
|
|
};
|
|
|
|
|
|
/* Description SCHEDULE_ID
|
|
|
|
Consumer: PDG/TXDMA/TXOLE/TXCRYPTO/TXPCU
|
|
Producer: SCH
|
|
|
|
This field is overwritten by the scheduler module and it's
|
|
value is coming from the"schedule_id" field in the Scheduler
|
|
command.
|
|
|
|
Configured by scheduler in HW transmit mode
|
|
A field that HW copies over into the scheduling status report,
|
|
so that SW can determine to which scheduler command the
|
|
status report belongs.
|
|
This schedule ID is also reported in the PPDU status.
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_SCHEDULE_ID_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_SCHEDULE_ID_LSB 0
|
|
#define TX_FES_SETUP_SCHEDULE_ID_MSB 31
|
|
#define TX_FES_SETUP_SCHEDULE_ID_MASK 0x00000000ffffffff
|
|
|
|
|
|
/* Description FES_IN_11AX_TRIGGER_RESPONSE_CONFIG
|
|
|
|
Consumer: PDG/TXPCU
|
|
Producer: SW
|
|
When set, this scheduler command has some additional settings
|
|
that PDG and TXPCU need to take into account, depending
|
|
on if the transmission has been iniated as a backoff expiration
|
|
or as the result of an 11ax trigger reception.
|
|
|
|
0: not in special trigger response config
|
|
1: command is special trigger response config.
|
|
|
|
When set to 1, there are some programming limitations: There
|
|
can only be 1 group, up to 8 users, SW shall have specified
|
|
the AC for each user, and AC order per user is from BE
|
|
to VO
|
|
(see PDG_USER_SETUP, fields Triggered_mpdu_AC_category)
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_FES_IN_11AX_TRIGGER_RESPONSE_CONFIG_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_FES_IN_11AX_TRIGGER_RESPONSE_CONFIG_LSB 32
|
|
#define TX_FES_SETUP_FES_IN_11AX_TRIGGER_RESPONSE_CONFIG_MSB 32
|
|
#define TX_FES_SETUP_FES_IN_11AX_TRIGGER_RESPONSE_CONFIG_MASK 0x0000000100000000
|
|
|
|
|
|
/* Description BO_BASED_TID_AGGREGATION_LIMIT
|
|
|
|
Consumer: PDG
|
|
Producer: SW
|
|
|
|
Field only valid when Ofdma_triggered_response is NOT set
|
|
(=> implies transmission started due to backoff expiration)
|
|
|
|
|
|
Field only valid for SU and "MU_SU" transmissions.
|
|
|
|
The requirements for what to transmit depend on what the
|
|
reason is that this transmission started. If it is 11ax
|
|
trigger based, the trigger frame will specify all the constrains
|
|
like max TID count, prefered AC, etc.
|
|
However if this command starts executing due to backoff
|
|
expiration, the requirements could be different from those
|
|
that might have come from the trigger frame.
|
|
This field specifies what the constaints are when the transmission
|
|
is Backoff initiated.
|
|
|
|
If zero, this feature is disabled.
|
|
If non-zero, this indicates the number of users within a
|
|
group that can be aggregated by a STA in a multi-TID A-MPDU.
|
|
This can also be used to block the series of QoS-null MPDUs
|
|
when an RBO+Trig queue transmits using RBO.
|
|
|
|
Based on this number, PDG will mask of user numbers >= this
|
|
count
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_BO_BASED_TID_AGGREGATION_LIMIT_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_BO_BASED_TID_AGGREGATION_LIMIT_LSB 33
|
|
#define TX_FES_SETUP_BO_BASED_TID_AGGREGATION_LIMIT_MSB 36
|
|
#define TX_FES_SETUP_BO_BASED_TID_AGGREGATION_LIMIT_MASK 0x0000001e00000000
|
|
|
|
|
|
/* Description RANGING
|
|
|
|
Consumer: TXPCU
|
|
Producer: SW
|
|
|
|
Set to 1 in case the frame queued is:
|
|
a .11az ranging NDPA,
|
|
a .11az ranging NDP, or
|
|
an ISTA2RSTA LMR.
|
|
Set to 0 for all other cases.
|
|
*/
|
|
|
|
#define TX_FES_SETUP_RANGING_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_RANGING_LSB 37
|
|
#define TX_FES_SETUP_RANGING_MSB 37
|
|
#define TX_FES_SETUP_RANGING_MASK 0x0000002000000000
|
|
|
|
|
|
/* Description EXPECT_I2R_LMR
|
|
|
|
Consumer: TXPCU
|
|
Producer: SW
|
|
|
|
Set to 1 in case the frame queued is a .11az randing NDPA/NDP
|
|
and if the ISTA2RSTA LMR frame is also queued after SIFS.
|
|
|
|
|
|
Set to 0 otherwise.
|
|
*/
|
|
|
|
#define TX_FES_SETUP_EXPECT_I2R_LMR_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_EXPECT_I2R_LMR_LSB 38
|
|
#define TX_FES_SETUP_EXPECT_I2R_LMR_MSB 38
|
|
#define TX_FES_SETUP_EXPECT_I2R_LMR_MASK 0x0000004000000000
|
|
|
|
|
|
/* Description TRANSMIT_START_REASON
|
|
|
|
Indicates what the SCH start reason reason was for initiating
|
|
this transmission.
|
|
|
|
<enum 0 BO_based_transmit_start> The transmission of this
|
|
PPDU got initiated by the scheduler due to Backoff expiration
|
|
|
|
<enum 1 Trigger_based_transmit_start> The transmission of
|
|
this PPDU got initiated by the scheduler due to reception
|
|
(by the SCH) of the TLV RECEIVED_TRIGGER_INFO that RXPCU
|
|
generated. Note that this can be an OFDMA trigger frame
|
|
based transmission as well as some legacy trigger (PS-POLL,
|
|
Qboost, U-APSD, etc.) based transmission
|
|
<enum 2 Sifs_continuation_in_ongoing_burst> This transmission
|
|
of this PPDU got initiated as part of SIFS continuation.
|
|
An earlier PPDU was transmitted due to RBO expiration. Next
|
|
command is also expected to be transmitted in SIFS burst.
|
|
|
|
<enum 3 Sifs_continuation_last_command> This transmission
|
|
of this PPDU got initiated as part of SIFS continuation
|
|
and this is the last command in the burst. An earlier PPDU
|
|
was transmitted due to RBO expiration.
|
|
<enum 4 NTBR_response_start> DO NOT USE
|
|
<legal 0-4>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_TRANSMIT_START_REASON_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_TRANSMIT_START_REASON_LSB 39
|
|
#define TX_FES_SETUP_TRANSMIT_START_REASON_MSB 41
|
|
#define TX_FES_SETUP_TRANSMIT_START_REASON_MASK 0x0000038000000000
|
|
|
|
|
|
/* Description USE_ALT_POWER_SR
|
|
|
|
0: Primary/default power1: Alternate power
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_USE_ALT_POWER_SR_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_USE_ALT_POWER_SR_LSB 42
|
|
#define TX_FES_SETUP_USE_ALT_POWER_SR_MSB 42
|
|
#define TX_FES_SETUP_USE_ALT_POWER_SR_MASK 0x0000040000000000
|
|
|
|
|
|
/* Description STATIC_2_PWR_MODE_STATUS
|
|
|
|
0: Static 2 power mode disabled1: Static 2 power mode enabled
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_STATIC_2_PWR_MODE_STATUS_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_STATIC_2_PWR_MODE_STATUS_LSB 43
|
|
#define TX_FES_SETUP_STATIC_2_PWR_MODE_STATUS_MSB 43
|
|
#define TX_FES_SETUP_STATIC_2_PWR_MODE_STATUS_MASK 0x0000080000000000
|
|
|
|
|
|
/* Description OBSS_SRG_OPPORT_TRANSMIT_STATUS
|
|
|
|
0: Transmit based on SRG OBSS_PD opportunity initiated1:
|
|
Transmit based on non-SRG OBSS_PD opportunity initiated
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_OBSS_SRG_OPPORT_TRANSMIT_STATUS_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_OBSS_SRG_OPPORT_TRANSMIT_STATUS_LSB 44
|
|
#define TX_FES_SETUP_OBSS_SRG_OPPORT_TRANSMIT_STATUS_MSB 44
|
|
#define TX_FES_SETUP_OBSS_SRG_OPPORT_TRANSMIT_STATUS_MASK 0x0000100000000000
|
|
|
|
|
|
/* Description SRP_BASED_TRANSMIT_STATUS
|
|
|
|
0: non-SRP based transmit initiated1: SRP based transmit
|
|
initiated
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_SRP_BASED_TRANSMIT_STATUS_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_SRP_BASED_TRANSMIT_STATUS_LSB 45
|
|
#define TX_FES_SETUP_SRP_BASED_TRANSMIT_STATUS_MSB 45
|
|
#define TX_FES_SETUP_SRP_BASED_TRANSMIT_STATUS_MASK 0x0000200000000000
|
|
|
|
|
|
/* Description OBSS_PD_BASED_TRANSMIT_STATUS
|
|
|
|
0: non-OBSS_PD based transmit initiated1: obss_pd based
|
|
transmit initiated
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_OBSS_PD_BASED_TRANSMIT_STATUS_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_OBSS_PD_BASED_TRANSMIT_STATUS_LSB 46
|
|
#define TX_FES_SETUP_OBSS_PD_BASED_TRANSMIT_STATUS_MSB 46
|
|
#define TX_FES_SETUP_OBSS_PD_BASED_TRANSMIT_STATUS_MASK 0x0000400000000000
|
|
|
|
|
|
/* Description PUNCTURE_FROM_ALL_ALLOWED_MODES
|
|
|
|
Enables new scheme 2 puncturing in Beryllium:
|
|
TXPCU registers determine which puncture patterns (up to
|
|
37) are enabled for the transmission.
|
|
'TX_PUNCTURE_SETUP' is unused.
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_PUNCTURE_FROM_ALL_ALLOWED_MODES_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_PUNCTURE_FROM_ALL_ALLOWED_MODES_LSB 47
|
|
#define TX_FES_SETUP_PUNCTURE_FROM_ALL_ALLOWED_MODES_MSB 47
|
|
#define TX_FES_SETUP_PUNCTURE_FROM_ALL_ALLOWED_MODES_MASK 0x0000800000000000
|
|
|
|
|
|
/* Description SCHEDULE_CMD_RING_ID
|
|
|
|
Consumer: PDG/TXDMA/TXOLE/TXCRYPTO/TXPCU
|
|
Producer: SCH
|
|
|
|
This field is overwritten by the scheduler module and its
|
|
value is based on the scheduler ring where the command
|
|
is initiated.
|
|
|
|
The schedule command ring that originated this transmission
|
|
|
|
<enum 0 sch_cmd_ring_number0>
|
|
<enum 1 sch_cmd_ring_number1>
|
|
<enum 2 sch_cmd_ring_number2>
|
|
<enum 3 sch_cmd_ring_number3>
|
|
<enum 4 sch_cmd_ring_number4>
|
|
<enum 5 sch_cmd_ring_number5>
|
|
<enum 6 sch_cmd_ring_number6>
|
|
<enum 7 sch_cmd_ring_number7>
|
|
<enum 8 sch_cmd_ring_number8>
|
|
<enum 9 sch_cmd_ring_number9>
|
|
<enum 10 sch_cmd_ring_number10>
|
|
<enum 11 sch_cmd_ring_number11>
|
|
<enum 12 sch_cmd_ring_number12>
|
|
<enum 13 sch_cmd_ring_number13>
|
|
<enum 14 sch_cmd_ring_number14>
|
|
<enum 15 sch_cmd_ring_number15>
|
|
<enum 16 sch_cmd_ring_number16>
|
|
<enum 17 sch_cmd_ring_number17>
|
|
<enum 18 sch_cmd_ring_number18>
|
|
<enum 19 sch_cmd_ring_number19>
|
|
<enum 20 sch_cmd_ring_number20>
|
|
|
|
<legal 0-20>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_SCHEDULE_CMD_RING_ID_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_SCHEDULE_CMD_RING_ID_LSB 48
|
|
#define TX_FES_SETUP_SCHEDULE_CMD_RING_ID_MSB 52
|
|
#define TX_FES_SETUP_SCHEDULE_CMD_RING_ID_MASK 0x001f000000000000
|
|
|
|
|
|
/* Description FES_CONTROL_MODE
|
|
|
|
Consumer: PDG/TXDMA/TXOLE/TXCRYPTO/TXPCU
|
|
Producer: SCH
|
|
|
|
This field is overwritten by the scheduler module and it's
|
|
value is coming from the "FES_control_mode" field in the
|
|
Scheduler command.
|
|
|
|
<enum 0 SW_transmit_mode> No HW generated TLVs
|
|
<enum 1 PDG_transmit_mode> PDG is activated to generate
|
|
TLVs
|
|
|
|
Note: Final Bandwidth selection is always performed by TX
|
|
PCU.
|
|
<legal 0-1>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_FES_CONTROL_MODE_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_FES_CONTROL_MODE_LSB 53
|
|
#define TX_FES_SETUP_FES_CONTROL_MODE_MSB 54
|
|
#define TX_FES_SETUP_FES_CONTROL_MODE_MASK 0x0060000000000000
|
|
|
|
|
|
/* Description NUMBER_OF_USERS
|
|
|
|
Consumer: PDG/TXDMA/TXOLE/TXCRYPTO/TXPCU
|
|
Producer: SCH
|
|
|
|
The number of users in this transmission. Can be MU-MIMO
|
|
or OFDMA in case the number is > 1
|
|
<legal 1-63>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_NUMBER_OF_USERS_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_NUMBER_OF_USERS_LSB 55
|
|
#define TX_FES_SETUP_NUMBER_OF_USERS_MSB 60
|
|
#define TX_FES_SETUP_NUMBER_OF_USERS_MASK 0x1f80000000000000
|
|
|
|
|
|
/* Description MU_TYPE
|
|
|
|
In case the Number_of_users > 1, the transmission could
|
|
be MU or OFDMA.
|
|
This field indicates which one it is.
|
|
|
|
0: MU-MIMO
|
|
1: OFDMA
|
|
|
|
|
|
In case the number_of_user == 1, and PDG_FES_SETUP.mu_su_transmission
|
|
is set, this field indicates:0: SU transmitted in MU MIMO
|
|
format in compressed mode;1: SU transmitted in MU-OFDMA
|
|
format in uncompressed mode
|
|
|
|
Note: Within OFDMA classification, it could be that within
|
|
one or more RUs there will be MIMO transmission...This
|
|
is still considered as an 'OFDMA' class of MU transmission.
|
|
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_MU_TYPE_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_MU_TYPE_LSB 61
|
|
#define TX_FES_SETUP_MU_TYPE_MSB 61
|
|
#define TX_FES_SETUP_MU_TYPE_MASK 0x2000000000000000
|
|
|
|
|
|
/* Description OFDMA_TRIGGERED_RESPONSE
|
|
|
|
Consumer: TXPCU/PDG
|
|
Producer: SCH/SW
|
|
|
|
SW should always set this bit to 0
|
|
SCH will always overwrite this field and set it to the appropriate
|
|
value for the upcoming transmission.
|
|
|
|
When set (by SCH), this FES is initiated as a result of
|
|
receiving an OFDMA transmit trigger. PDG already has received
|
|
all transmit info from RXPCU. PDG can ignore most of the
|
|
transmit initialization info.
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_OFDMA_TRIGGERED_RESPONSE_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_OFDMA_TRIGGERED_RESPONSE_LSB 62
|
|
#define TX_FES_SETUP_OFDMA_TRIGGERED_RESPONSE_MSB 62
|
|
#define TX_FES_SETUP_OFDMA_TRIGGERED_RESPONSE_MASK 0x4000000000000000
|
|
|
|
|
|
/* Description RESPONSE_TO_RESPONSE_CMD
|
|
|
|
When set, this scheduler command contains the transmission
|
|
control for the response_to_response transmission
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_RESPONSE_TO_RESPONSE_CMD_OFFSET 0x0000000000000000
|
|
#define TX_FES_SETUP_RESPONSE_TO_RESPONSE_CMD_LSB 63
|
|
#define TX_FES_SETUP_RESPONSE_TO_RESPONSE_CMD_MSB 63
|
|
#define TX_FES_SETUP_RESPONSE_TO_RESPONSE_CMD_MASK 0x8000000000000000
|
|
|
|
|
|
/* Description SCHEDULE_TRY
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
This field is overwritten by the scheduler module and it's
|
|
value is coming from an internal counter in the scheduler
|
|
that keeps track of how many times a scheduling command
|
|
has been tried.
|
|
|
|
This count indicates how many times the FES did not successfully
|
|
complete as the ACK/BA frame did not get received.
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_SCHEDULE_TRY_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_SCHEDULE_TRY_LSB 0
|
|
#define TX_FES_SETUP_SCHEDULE_TRY_MSB 3
|
|
#define TX_FES_SETUP_SCHEDULE_TRY_MASK 0x000000000000000f
|
|
|
|
|
|
/* Description NDP_FRAME
|
|
|
|
Consumer: PDG/TXPCU
|
|
Producer: SCH
|
|
|
|
When set, the scheduling command contains an NDP frame.
|
|
This can only be done using the SW transmit mode.
|
|
|
|
<enum 0 no_ndp>No NDP transmission
|
|
<enum 1 beamforming_ndp>Beamforming NDP
|
|
<enum 2 he_ranging_ndp>11az NDP (HE Ranging NDP)
|
|
<enum 3 he_feedback_ndp>Short TB (HE Feedback NDP)
|
|
*/
|
|
|
|
#define TX_FES_SETUP_NDP_FRAME_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_NDP_FRAME_LSB 4
|
|
#define TX_FES_SETUP_NDP_FRAME_MSB 5
|
|
#define TX_FES_SETUP_NDP_FRAME_MASK 0x0000000000000030
|
|
|
|
|
|
/* Description TXBF
|
|
|
|
Consumer: PDG/TXPCU
|
|
Producer: SCH
|
|
|
|
If set, this bit indicates that this is a TX beamformed
|
|
SU transaction or MU transaction
|
|
|
|
|
|
In case of a beamformed transmission, note that in the PCU_PPDU_SETUP_INIT
|
|
TLV, SW can narrow down for which of the BW the beamforming
|
|
shall take place. For example, SW can decide that BW is
|
|
only desired for 40MHz BW, but not for 20...
|
|
If for any of the allowed BW, beamforming is desired, this
|
|
field should be set, and the 'bf_type' shall be properly
|
|
programmed.
|
|
|
|
TXPCU controls with bit 'beamforming' in the MACTX_PRE_PHY_DESC
|
|
if the final actual transmission shall be beamformed.
|
|
*/
|
|
|
|
#define TX_FES_SETUP_TXBF_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_TXBF_LSB 6
|
|
#define TX_FES_SETUP_TXBF_MSB 6
|
|
#define TX_FES_SETUP_TXBF_MASK 0x0000000000000040
|
|
|
|
|
|
/* Description ALLOW_TXOP_EXCEED_IN_1ST_PKT
|
|
|
|
Consumer: PDG
|
|
Producer: SCH
|
|
|
|
Field only valid for SU transmissions.
|
|
|
|
When set, a single MPDU transmission after RBO is allowed
|
|
to exceed TXOP. In this setting, this field has priority
|
|
over the setting of the duration_field_boundary. Reason
|
|
for this is that if Coex issues on the receiver STA start
|
|
preventing the transmission of frames on this device, it
|
|
can lead to a death spiral. With some luck, this frame
|
|
although maybe too long, might still be received.
|
|
|
|
When 0, single MPDU after RBO is not allowed to exceed TXOP.
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_ALLOW_TXOP_EXCEED_IN_1ST_PKT_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_ALLOW_TXOP_EXCEED_IN_1ST_PKT_LSB 7
|
|
#define TX_FES_SETUP_ALLOW_TXOP_EXCEED_IN_1ST_PKT_MSB 7
|
|
#define TX_FES_SETUP_ALLOW_TXOP_EXCEED_IN_1ST_PKT_MASK 0x0000000000000080
|
|
|
|
|
|
/* Description IGNORE_BW_AVAILABLE
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
If set, TXPCU ignores 'BW available signals' from the scheduler
|
|
and transmit using the single BW that SW has programmed
|
|
the transmission to go out in. This bit should be set for
|
|
SIFS response frame to PS-Poll/uAPSD/QBoost and note that
|
|
for this mode, SW is only allowed to program a single transmit
|
|
BW.
|
|
Also note that this bit can not be set in combination with
|
|
preamble puncturing.
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_IGNORE_BW_AVAILABLE_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_IGNORE_BW_AVAILABLE_LSB 8
|
|
#define TX_FES_SETUP_IGNORE_BW_AVAILABLE_MSB 8
|
|
#define TX_FES_SETUP_IGNORE_BW_AVAILABLE_MASK 0x0000000000000100
|
|
|
|
|
|
/* Description IGNORE_TBTT
|
|
|
|
Consumer: PDG
|
|
Producer: SCH
|
|
|
|
If set, PDG ignores remaining TBTTs in PPDU time calculation.
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_IGNORE_TBTT_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_IGNORE_TBTT_LSB 9
|
|
#define TX_FES_SETUP_IGNORE_TBTT_MSB 9
|
|
#define TX_FES_SETUP_IGNORE_TBTT_MASK 0x0000000000000200
|
|
|
|
|
|
/* Description STATIC_BANDWIDTH
|
|
|
|
Consumer: PDG/TXPCU
|
|
Producer: SCH
|
|
|
|
Field is reserved when use_static_bw is clear.
|
|
|
|
<enum 0 20_mhz>20 Mhz BW
|
|
<enum 1 40_mhz>40 Mhz BW
|
|
<enum 2 80_mhz>80 Mhz BW
|
|
<enum 3 160_mhz>160 Mhz BW
|
|
<enum 4 320_mhz>320 Mhz BW
|
|
<enum 5 240_mhz>240 Mhz BW
|
|
*/
|
|
|
|
#define TX_FES_SETUP_STATIC_BANDWIDTH_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_STATIC_BANDWIDTH_LSB 10
|
|
#define TX_FES_SETUP_STATIC_BANDWIDTH_MSB 12
|
|
#define TX_FES_SETUP_STATIC_BANDWIDTH_MASK 0x0000000000001c00
|
|
|
|
|
|
/* Description SET_TXOP_DURATION_ALL_ONES
|
|
|
|
Consumer: PDG
|
|
Producer: SCH
|
|
|
|
When set, SW embedded a PS_POLL frame in this transmission
|
|
or the frame in this transmission is for a BSS with BSS
|
|
Color disabled, e.g. due to BSS color collision.
|
|
PDG sets the TXOP_DURATION of the transmit PPDU to all 1s.
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_SET_TXOP_DURATION_ALL_ONES_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_SET_TXOP_DURATION_ALL_ONES_LSB 13
|
|
#define TX_FES_SETUP_SET_TXOP_DURATION_ALL_ONES_MSB 13
|
|
#define TX_FES_SETUP_SET_TXOP_DURATION_ALL_ONES_MASK 0x0000000000002000
|
|
|
|
|
|
/* Description TRANSMISSION_CONTAINS_MU_RTS
|
|
|
|
Consumer: PDG
|
|
Producer: SCH
|
|
|
|
When set, SW embedded a MU-RTS trigger frame in this transmission.
|
|
|
|
TXPCU will have to do something special for this with the
|
|
CTS response timeout (whose value comes from a MU-CTS timeout
|
|
register)
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_TRANSMISSION_CONTAINS_MU_RTS_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_TRANSMISSION_CONTAINS_MU_RTS_LSB 14
|
|
#define TX_FES_SETUP_TRANSMISSION_CONTAINS_MU_RTS_MSB 14
|
|
#define TX_FES_SETUP_TRANSMISSION_CONTAINS_MU_RTS_MASK 0x0000000000004000
|
|
|
|
|
|
/* Description BW_RESTRICTED_FRAMES_EMBEDDED
|
|
|
|
Consumer: TXPCU
|
|
Producer: SW
|
|
|
|
This bit should be set by SW when the transmission includes
|
|
bandwidth restricted frames. As a result of this bit being
|
|
set, TXPCU will hold of indicating that buffer space is
|
|
available to TXDMA till the BW decision is done. This allows
|
|
TXPCU to drop the BW restricted frames at SFM input.
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_BW_RESTRICTED_FRAMES_EMBEDDED_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_BW_RESTRICTED_FRAMES_EMBEDDED_LSB 15
|
|
#define TX_FES_SETUP_BW_RESTRICTED_FRAMES_EMBEDDED_MSB 15
|
|
#define TX_FES_SETUP_BW_RESTRICTED_FRAMES_EMBEDDED_MASK 0x0000000000008000
|
|
|
|
|
|
/* Description AST_INDEX
|
|
|
|
Consumer: RXPCU
|
|
Producer: SCH
|
|
|
|
Used for implicit BF sounding capture on receive Ack/BA.
|
|
The RXPCU needs to tag the receive sounding with ast_index
|
|
so FW will know which STA is associated with Ack/BA sounding.
|
|
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_AST_INDEX_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_AST_INDEX_LSB 16
|
|
#define TX_FES_SETUP_AST_INDEX_MSB 31
|
|
#define TX_FES_SETUP_AST_INDEX_MASK 0x00000000ffff0000
|
|
|
|
|
|
/* Description CV_ID
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
This field is only valid when expect_cbf is set.
|
|
|
|
A unique ID corresponding to the CV data expected from the
|
|
CBF frame.
|
|
|
|
TXPCU copies this field over to the TX_FES_STATUS TLV
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_CV_ID_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_CV_ID_LSB 32
|
|
#define TX_FES_SETUP_CV_ID_MSB 39
|
|
#define TX_FES_SETUP_CV_ID_MASK 0x000000ff00000000
|
|
|
|
|
|
/* Description TRIGGER_RESP_TXPDU_PPDU_BOUNDARY
|
|
|
|
This field indicates to TXPCU how far into the 11ax trigger
|
|
response transmission, TXPCU should still accept Trigger
|
|
response related configuration info from the SCHEDULER (and
|
|
PDG) to be processed.
|
|
|
|
The field indicates a percentage of the total byte count
|
|
to be given to the PHY, up to which point TXPCU will still
|
|
accept all the setup related TLVS to arrive. After that,
|
|
TXPCU will ignore any remaining setup TLVs to come in and
|
|
not initiate any MPDU based transfers to the PHY anymore.
|
|
This is to help avoid corner cases.
|
|
If any setup TLVs did arrive after this point, TXPCU will
|
|
keep on continuing giving NULL data to the PHY, but once
|
|
PHYTX_PKT_END is received, TXPCU shall issue a FLUSH request
|
|
to the SCH, with flush code: TXPCU_TRIG_RESPONSE_INFO_TOO_LATE
|
|
|
|
TXPCU should not abort the transmission halfway, as that
|
|
can cause problems for the MU UL receiver...
|
|
|
|
<enum 0 txpcu_trig_response_boundary_75> TXPCU will not
|
|
initiate SCH based MPDU transfers after 75% of the PPDU
|
|
octed count has already been given to the PHY.
|
|
|
|
<enum 1 txpcu_trig_response_boundary_50> TXPCU will not
|
|
initiate SCH based MPDU transfers after 50% of the PPDU
|
|
octed count has already been given to the PHY.
|
|
|
|
<enum 2 txpcu_trig_response_boundary_25> TXPCU will not
|
|
initiate SCH based MPDU transfers after 75% of the PPDU
|
|
octed count has already been given to the PHY.
|
|
|
|
Note that if TXPCU receives a TX_FES_SETUP with "11ax trigger
|
|
response transmission" set, and it had already finished
|
|
sending a response , it should generate a flush with code:
|
|
TXPCU_TRIG_RESPONSE_MODE_CORRUPTION
|
|
|
|
<legal 0-2>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_TRIGGER_RESP_TXPDU_PPDU_BOUNDARY_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_TRIGGER_RESP_TXPDU_PPDU_BOUNDARY_LSB 40
|
|
#define TX_FES_SETUP_TRIGGER_RESP_TXPDU_PPDU_BOUNDARY_MSB 41
|
|
#define TX_FES_SETUP_TRIGGER_RESP_TXPDU_PPDU_BOUNDARY_MASK 0x0000030000000000
|
|
|
|
|
|
/* Description RXPCU_SETUP_COMPLETE_PRESENT
|
|
|
|
To notify current TXFES use new mode and delay "RXPCU_*_SETUP"
|
|
for HWSCH/TXPCU/RXPCU module
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_RXPCU_SETUP_COMPLETE_PRESENT_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_RXPCU_SETUP_COMPLETE_PRESENT_LSB 42
|
|
#define TX_FES_SETUP_RXPCU_SETUP_COMPLETE_PRESENT_MSB 42
|
|
#define TX_FES_SETUP_RXPCU_SETUP_COMPLETE_PRESENT_MASK 0x0000040000000000
|
|
|
|
|
|
/* Description RBO_MUST_HAVE_DATA_USER_LIMIT
|
|
|
|
Consumer: PDG
|
|
Producer: SW
|
|
|
|
Field only valid when Ofdma_triggered_response is NOT set
|
|
(=> implies transmission started due to backoff expiration)
|
|
|
|
|
|
Field only valid for SU and "MU_SU" transmissions.
|
|
|
|
The requirements for what to transmit depend on what the
|
|
reason is that this transmission started. If it is 11ax
|
|
trigger based, the trigger frame will specify all the constrains
|
|
like max TID count, prefered AC, etc.
|
|
However if this command starts executing due to backoff
|
|
expiration, the requirements could be different from those
|
|
that might have come from the trigger frame.
|
|
This field specifies what the constaints are when the transmission
|
|
is Backoff initiated.
|
|
|
|
When set to 0, this feature is disabled
|
|
When set to 1, user 0 must have data otherwise PDG should
|
|
flush the transmission
|
|
When set to 2, user 0 AND/OR user 1 must have data otherwise
|
|
PDG should flush the transmission
|
|
When set to 3, user 0 AND/OR user 1 AND/OR user 2 must have
|
|
data otherwise PDG should flush the transmission
|
|
...
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_RBO_MUST_HAVE_DATA_USER_LIMIT_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_RBO_MUST_HAVE_DATA_USER_LIMIT_LSB 43
|
|
#define TX_FES_SETUP_RBO_MUST_HAVE_DATA_USER_LIMIT_MSB 46
|
|
#define TX_FES_SETUP_RBO_MUST_HAVE_DATA_USER_LIMIT_MASK 0x0000780000000000
|
|
|
|
|
|
/* Description MU_NDP
|
|
|
|
Field only valid when ndp_frame is set.
|
|
|
|
If set indicates that this packet is an NDP used for MU
|
|
channel estimation. This bit will be used by the TPC to
|
|
signal that the analog gain settings can be updated. The
|
|
analog gain settings will not change for subsequent MU
|
|
data packets.
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_MU_NDP_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_MU_NDP_LSB 47
|
|
#define TX_FES_SETUP_MU_NDP_MSB 47
|
|
#define TX_FES_SETUP_MU_NDP_MASK 0x0000800000000000
|
|
|
|
|
|
/* Description BF_TYPE
|
|
|
|
Consumer: PDG/TXPCU
|
|
Producer: SCH
|
|
|
|
Field is ONLY valid when 'txbf' is set...
|
|
|
|
Defines the type of beamforming that is required using this
|
|
transmission.
|
|
Note that in the PCU_PPDU_SETUP_INIT TLV, SW can narrow
|
|
down for which BW the beamforming shall take place. For
|
|
example, SW can decide that BW is only desired for 40MHz
|
|
BW, but not for 20...
|
|
If for any of the allowed BW, beamforming is desired, this
|
|
field should indicate which type of BF.
|
|
|
|
<enum 0 NO_BF>
|
|
<enum 1 LEGACY_BF>
|
|
<enum 2 SU_BF>
|
|
<enum 3 MU_BF>
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_BF_TYPE_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_BF_TYPE_LSB 48
|
|
#define TX_FES_SETUP_BF_TYPE_MSB 49
|
|
#define TX_FES_SETUP_BF_TYPE_MASK 0x0003000000000000
|
|
|
|
|
|
/* Description CBF_NC_INDEX_MASK
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
When set, TXPCU shall confirm that the received cbf_nc_index
|
|
is equal to the expected one, indicated by field: cbf_nc_index
|
|
|
|
|
|
This field is only allowed to be set in case of a single
|
|
SU CBF reception.
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_CBF_NC_INDEX_MASK_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_CBF_NC_INDEX_MASK_LSB 50
|
|
#define TX_FES_SETUP_CBF_NC_INDEX_MASK_MSB 50
|
|
#define TX_FES_SETUP_CBF_NC_INDEX_MASK_MASK 0x0004000000000000
|
|
|
|
|
|
/* Description CBF_NC_INDEX
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
Field only valid when cbf_nc_index_mask is set
|
|
|
|
Expected Nc_index of received CBF frame after sending NDP
|
|
or BR-Poll.
|
|
|
|
<enum 0 nc_1>
|
|
<enum 1 nc_2>
|
|
<enum 2 nc_3>
|
|
<enum 3 nc_4>
|
|
<enum 4 nc_5>
|
|
<enum 5 nc_6>
|
|
<enum 6 nc_7>
|
|
<enum 7 nc_8>
|
|
<legal 0-7>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_CBF_NC_INDEX_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_CBF_NC_INDEX_LSB 51
|
|
#define TX_FES_SETUP_CBF_NC_INDEX_MSB 53
|
|
#define TX_FES_SETUP_CBF_NC_INDEX_MASK 0x0038000000000000
|
|
|
|
|
|
/* Description CBF_NR_INDEX_MASK
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
When set, TXPCU shall confirm that the received cbf_nr_index
|
|
is equal to the expected one, indicated in the field: cbf_nr_index
|
|
|
|
|
|
This field is only allowed to be set in case of a single
|
|
SU CBF reception.
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_CBF_NR_INDEX_MASK_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_CBF_NR_INDEX_MASK_LSB 54
|
|
#define TX_FES_SETUP_CBF_NR_INDEX_MASK_MSB 54
|
|
#define TX_FES_SETUP_CBF_NR_INDEX_MASK_MASK 0x0040000000000000
|
|
|
|
|
|
/* Description CBF_NR_INDEX
|
|
|
|
Expected Nr_index of received CBF frame after sending NDP
|
|
or BR-Poll. This field is compared only if cbf_nr_index_mask
|
|
is set to 1.
|
|
<enum 0 nr_1>
|
|
<enum 1 nr_2>
|
|
<enum 2 nr_3>
|
|
<enum 3 nr_4>
|
|
<enum 4 nr_5>
|
|
<enum 5 nr_6>
|
|
<enum 6 nr_7>
|
|
<enum 7 nr_8>
|
|
<legal 0-7>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_CBF_NR_INDEX_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_CBF_NR_INDEX_LSB 55
|
|
#define TX_FES_SETUP_CBF_NR_INDEX_MSB 57
|
|
#define TX_FES_SETUP_CBF_NR_INDEX_MASK 0x0380000000000000
|
|
|
|
|
|
/* Description SECURE_RANGING_ISTA
|
|
|
|
Consumer: Crypto
|
|
Producer: SW
|
|
|
|
If set to 1, Crypto will use the 'TX_PEER_ENTRY' for encryption
|
|
but not for the 'TX_DATA' from TXOLE interface but will
|
|
wait for 'LMR_{MPDU_START, DATA, MPDU_END}' TLVs from TXPCU
|
|
to encrypt the ISTA2RSTA LMR.
|
|
|
|
If set to 0, Crypto will encrypt 'TX_DATA' as for any non-.11az-ranging
|
|
frame.
|
|
*/
|
|
|
|
#define TX_FES_SETUP_SECURE_RANGING_ISTA_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_SECURE_RANGING_ISTA_LSB 58
|
|
#define TX_FES_SETUP_SECURE_RANGING_ISTA_MSB 58
|
|
#define TX_FES_SETUP_SECURE_RANGING_ISTA_MASK 0x0400000000000000
|
|
|
|
|
|
/* Description NDPA
|
|
|
|
When set, this packet is an NDP announcement.
|
|
*/
|
|
|
|
#define TX_FES_SETUP_NDPA_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_NDPA_LSB 59
|
|
#define TX_FES_SETUP_NDPA_MSB 59
|
|
#define TX_FES_SETUP_NDPA_MASK 0x0800000000000000
|
|
|
|
|
|
/* Description WAIT_SIFS
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
This field is passed over to the tx_phy_desc by the PDG
|
|
module. If set, the AMPI will hold this tx_phy_desc TLV
|
|
from the TX PCU until SIFS has elapsed and then forward
|
|
the tx_phy_desc to the PHY. The PHY should ignore this
|
|
bit. This bit is used to make sure that transmit SIFS response
|
|
to a receive frame is cycle accurate and consistent to
|
|
enable accurate RTT measurement.
|
|
|
|
<enum 0 NO_SIFS_TIMING> Transmission shall start with the
|
|
normal delay in PHY after receiving this notification
|
|
<enum 1 SIFS_TIMING_DESIRED> Transmission shall be made
|
|
at the SIFS boundary. If shall never start before SIFS boundary,
|
|
but if it a little later, it is not ideal and should be
|
|
flagged, but transmission shall not be aborted.
|
|
<enum 2 SIFS_TIMING_MANDATED> Transmission shall be made
|
|
at exactly SIFS boundary. If this notification is received
|
|
by the PHY after SIFS boundary already passed, the PHY
|
|
shall abort the transmission
|
|
<legal 0-2>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_WAIT_SIFS_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_WAIT_SIFS_LSB 60
|
|
#define TX_FES_SETUP_WAIT_SIFS_MSB 61
|
|
#define TX_FES_SETUP_WAIT_SIFS_MASK 0x3000000000000000
|
|
|
|
|
|
/* Description CBF_FEEDBACK_TYPE_MASK
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
When set, TXPCU shall confirm that the cbf_feedback_type
|
|
is equal to the expected one, indicated in the field: cbf_feedback_type
|
|
|
|
|
|
This field is only allowed to be set in case of a single
|
|
SU CBF reception.
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_CBF_FEEDBACK_TYPE_MASK_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_CBF_FEEDBACK_TYPE_MASK_LSB 62
|
|
#define TX_FES_SETUP_CBF_FEEDBACK_TYPE_MASK_MSB 62
|
|
#define TX_FES_SETUP_CBF_FEEDBACK_TYPE_MASK_MASK 0x4000000000000000
|
|
|
|
|
|
/* Description CBF_FEEDBACK_TYPE
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
Expected feedback type of received CBF frame after sending
|
|
NDP or BR-Poll. This field is compared only if cbf_feedback_type_mask
|
|
is set to 1.
|
|
<enum 0 SU>
|
|
<enum 1 MU>
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_CBF_FEEDBACK_TYPE_OFFSET 0x0000000000000008
|
|
#define TX_FES_SETUP_CBF_FEEDBACK_TYPE_LSB 63
|
|
#define TX_FES_SETUP_CBF_FEEDBACK_TYPE_MSB 63
|
|
#define TX_FES_SETUP_CBF_FEEDBACK_TYPE_MASK 0x8000000000000000
|
|
|
|
|
|
/* Description CBF_SOUNDING_TOKEN
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
Expected sounding token of received CBF frame after sending
|
|
NDP or BR-Poll. This field is compared only if cbf_sounding_token_mask
|
|
is set to 1.
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_CBF_SOUNDING_TOKEN_OFFSET 0x0000000000000010
|
|
#define TX_FES_SETUP_CBF_SOUNDING_TOKEN_LSB 0
|
|
#define TX_FES_SETUP_CBF_SOUNDING_TOKEN_MSB 5
|
|
#define TX_FES_SETUP_CBF_SOUNDING_TOKEN_MASK 0x000000000000003f
|
|
|
|
|
|
/* Description CBF_SOUNDING_TOKEN_MASK
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
When set, TXPCU shall confirm that the cbf_sounding_token
|
|
is equal to the expected one, indicated in the field: cbf_sounding_token
|
|
|
|
|
|
This field is only allowed to be set in case of a single
|
|
SU CBF reception.
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_CBF_SOUNDING_TOKEN_MASK_OFFSET 0x0000000000000010
|
|
#define TX_FES_SETUP_CBF_SOUNDING_TOKEN_MASK_LSB 6
|
|
#define TX_FES_SETUP_CBF_SOUNDING_TOKEN_MASK_MSB 6
|
|
#define TX_FES_SETUP_CBF_SOUNDING_TOKEN_MASK_MASK 0x0000000000000040
|
|
|
|
|
|
/* Description CBF_BW_MASK
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
When set, TXPCU shall confirm that the cbf_bw_mask is equal
|
|
to the expected one, indicated in the field: cbf_bw
|
|
|
|
This field is only allowed to be set in case of a single
|
|
SU CBF reception.
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_CBF_BW_MASK_OFFSET 0x0000000000000010
|
|
#define TX_FES_SETUP_CBF_BW_MASK_LSB 7
|
|
#define TX_FES_SETUP_CBF_BW_MASK_MSB 7
|
|
#define TX_FES_SETUP_CBF_BW_MASK_MASK 0x0000000000000080
|
|
|
|
|
|
/* Description CBF_BW
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
Expected channel width of received CBF frame after sending
|
|
NDP or BR-Poll. This field is compared only if cbf_bw_mask
|
|
is set to 1.
|
|
|
|
<enum 0 20_mhz>20 Mhz BW
|
|
<enum 1 40_mhz>40 Mhz BW
|
|
<enum 2 80_mhz>80 Mhz BW
|
|
<enum 3 160_mhz>160 Mhz BW
|
|
<enum 4 320_mhz>320 Mhz BW
|
|
<enum 5 240_mhz>240 Mhz BW
|
|
*/
|
|
|
|
#define TX_FES_SETUP_CBF_BW_OFFSET 0x0000000000000010
|
|
#define TX_FES_SETUP_CBF_BW_LSB 8
|
|
#define TX_FES_SETUP_CBF_BW_MSB 10
|
|
#define TX_FES_SETUP_CBF_BW_MASK 0x0000000000000700
|
|
|
|
|
|
/* Description USE_STATIC_BW
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
Part of TX_BF_PARAMS: This field is used to indicate to
|
|
the SVD that the b/w that will be defined in the TX_PHY_DESC
|
|
for the upcoming TXBF packet will be the same as the static
|
|
bandwidth, i.e. the bandwidth that was in operation during
|
|
sounding for the clients in question
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_USE_STATIC_BW_OFFSET 0x0000000000000010
|
|
#define TX_FES_SETUP_USE_STATIC_BW_LSB 11
|
|
#define TX_FES_SETUP_USE_STATIC_BW_MSB 11
|
|
#define TX_FES_SETUP_USE_STATIC_BW_MASK 0x0000000000000800
|
|
|
|
|
|
/* Description COEX_NACK_COUNT
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
The number of times PDG informed the SCHeduler module that
|
|
for this scheduling command, the WLAN transmission can
|
|
not be initialized due to getting a NACK response from the
|
|
Coex engine, or PDG not being able to fit a transmission
|
|
within the timing constraints given by Coex.
|
|
|
|
Note that SCH will (re)set this count to 0 at the start
|
|
of reading a new SCH command.
|
|
This count is maintained on a per ring basis by the SCHeduler
|
|
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_COEX_NACK_COUNT_OFFSET 0x0000000000000010
|
|
#define TX_FES_SETUP_COEX_NACK_COUNT_LSB 12
|
|
#define TX_FES_SETUP_COEX_NACK_COUNT_MSB 16
|
|
#define TX_FES_SETUP_COEX_NACK_COUNT_MASK 0x000000000001f000
|
|
|
|
|
|
/* Description SCH_TX_BURST_ONGOING
|
|
|
|
Consumer: PDG/TXPCU
|
|
Producer: SCH
|
|
|
|
This field is overwritten by the scheduler module and it's
|
|
value is coming from the" sifs_burst_continuation" field
|
|
in the Scheduler command.
|
|
|
|
0: No action
|
|
1: The next scheduling command needs to start at SIFS time
|
|
after finishing the frame transmissions in this command.
|
|
This allows for SIFS based bursting
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_SCH_TX_BURST_ONGOING_OFFSET 0x0000000000000010
|
|
#define TX_FES_SETUP_SCH_TX_BURST_ONGOING_LSB 17
|
|
#define TX_FES_SETUP_SCH_TX_BURST_ONGOING_MSB 17
|
|
#define TX_FES_SETUP_SCH_TX_BURST_ONGOING_MASK 0x0000000000020000
|
|
|
|
|
|
/* Description GEN_TQM_UPDATE_MPDU_COUNT_TLV
|
|
|
|
Consumer: TXPCU
|
|
Producer: SW
|
|
|
|
NOTE: When PDG is configured to do transmissions in SW mode,
|
|
this bit shall NEVER be set.
|
|
|
|
When set, TXPCU shall generate the TQM_UPDATE_TX_MPDU_COUNT
|
|
TLV immediately after PPDU transmission has finished (and
|
|
before any response frame might have been received)
|
|
|
|
When set, SW shall also generate the RXPCU_USER_SETUP TLVs
|
|
as this is where TXPCU will get the MPDU_queue addresses.
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_GEN_TQM_UPDATE_MPDU_COUNT_TLV_OFFSET 0x0000000000000010
|
|
#define TX_FES_SETUP_GEN_TQM_UPDATE_MPDU_COUNT_TLV_LSB 18
|
|
#define TX_FES_SETUP_GEN_TQM_UPDATE_MPDU_COUNT_TLV_MSB 18
|
|
#define TX_FES_SETUP_GEN_TQM_UPDATE_MPDU_COUNT_TLV_MASK 0x0000000000040000
|
|
|
|
|
|
/* Description TRANSMIT_VIF
|
|
|
|
Consumer: TXOLE
|
|
Producer: SW
|
|
|
|
The VIF for this transmission. Used in MCC mode to control/overwrite
|
|
the PM bit settings. Based on this VIF value, TXOLE gets
|
|
the pm bit control instructions from the pm_state_overwrite_per_vif
|
|
register
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_TRANSMIT_VIF_OFFSET 0x0000000000000010
|
|
#define TX_FES_SETUP_TRANSMIT_VIF_LSB 19
|
|
#define TX_FES_SETUP_TRANSMIT_VIF_MSB 22
|
|
#define TX_FES_SETUP_TRANSMIT_VIF_MASK 0x0000000000780000
|
|
|
|
|
|
/* Description OPTIMAL_BW_RETRY_COUNT
|
|
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
This field is overwritten by the scheduler module and it's
|
|
value is coming from an internal counter in the scheduler
|
|
that keeps track of how many times this scheduling command
|
|
has been flushed by TXPCU as a result of most desired BW
|
|
not being available (=> flush code: TXPCU_FLREQ_RETRY_FOR_OPTIMAL_BW)
|
|
|
|
|
|
For the first transmission, this count is always set to
|
|
0.
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_OPTIMAL_BW_RETRY_COUNT_OFFSET 0x0000000000000010
|
|
#define TX_FES_SETUP_OPTIMAL_BW_RETRY_COUNT_LSB 23
|
|
#define TX_FES_SETUP_OPTIMAL_BW_RETRY_COUNT_MSB 26
|
|
#define TX_FES_SETUP_OPTIMAL_BW_RETRY_COUNT_MASK 0x0000000007800000
|
|
|
|
|
|
/* Description FES_CONTINUATION_RATIO_THRESHOLD
|
|
|
|
Field evaluated by TXPCU only.
|
|
|
|
This Feature is not supported in Napier and Hastings.
|
|
|
|
Field can be used in both SU and MU transmissions, but might
|
|
be most useful in MU transmissions.
|
|
|
|
TXPCU keeps track of how many MPDU data words are transmited
|
|
as well as how many Null delimiters are transmitted. In
|
|
case of an MU and/or multi TID transmission, these two
|
|
counters are the aggregates over all the users.
|
|
|
|
At the end of the FES, TXPCU determines the ratio between
|
|
the actual MPDU data words and Null delimiters. If this
|
|
ratio is LESS then the ratio indicated here, TXPCU should
|
|
indicate "Transmit_data_null_ratio_not_met" in the TX_FES_STATUS_END
|
|
|
|
|
|
<enum 0 No_Data_Null_ratio_requirement> TXPCU does not need
|
|
to do any evaluation on the ratio between actual data transmitted
|
|
and NULL delimiters inserted.
|
|
<enum 1 Data_Null_ratio_16_1> At the end of the FES, TXPCU
|
|
shall confirm that the DATA:NULL delimiter ratio was at
|
|
least 16:1. If not met, TXPCU should terminate FES.
|
|
<enum 2 Data_Null_ratio_8_1> At the end of the FES, TXPCU
|
|
shall confirm that the DATA:NULL delimiter ratio was at
|
|
least 8:1. If not met, TXPCU should terminate FES.
|
|
<enum 3 Data_Null_ratio_4_1> At the end of the FES, TXPCU
|
|
shall confirm that the DATA:NULL delimiter ratio was at
|
|
least 4:1. If not met, TXPCU should terminate FES.
|
|
<enum 4 Data_Null_ratio_2_1> At the end of the FES, TXPCU
|
|
shall confirm that the DATA:NULL delimiter ratio was at
|
|
least 2:1. If not met, TXPCU should terminate FES.
|
|
<enum 5 Data_Null_ratio_1_1> At the end of the FES, TXPCU
|
|
shall confirm that the DATA:NULL delimiter ratio was at
|
|
least 1:1. If not met, TXPCU should terminate FES.
|
|
<enum 6 Data_Null_ratio_1_2> At the end of the FES, TXPCU
|
|
shall confirm that the DATA:NULL delimiter ratio was at
|
|
least 1:2. If not met, TXPCU should terminate FES.
|
|
<enum 7 Data_Null_ratio_1_4> At the end of the FES, TXPCU
|
|
shall confirm that the DATA:NULL delimiter ratio was at
|
|
least 1:4. If not met, TXPCU should terminate FES.
|
|
<enum 8 Data_Null_ratio_1_8> At the end of the FES, TXPCU
|
|
shall confirm that the DATA:NULL delimiter ratio was at
|
|
least 1:8. If not met, TXPCU should terminate FES.
|
|
<enum 9 Data_Null_ratio_1_16> At the end of the FES, TXPCU
|
|
shall confirm that the DATA:NULL delimiter ratio was at
|
|
least 1:16. If not met, TXPCU should terminate FES.
|
|
|
|
<legal 0-9>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_FES_CONTINUATION_RATIO_THRESHOLD_OFFSET 0x0000000000000010
|
|
#define TX_FES_SETUP_FES_CONTINUATION_RATIO_THRESHOLD_LSB 27
|
|
#define TX_FES_SETUP_FES_CONTINUATION_RATIO_THRESHOLD_MSB 31
|
|
#define TX_FES_SETUP_FES_CONTINUATION_RATIO_THRESHOLD_MASK 0x00000000f8000000
|
|
|
|
|
|
/* Description TRANSMIT_CCA_BITMAP
|
|
|
|
The CCA signals that shall be evaluated by TXPCU to determine
|
|
the BW/puncture pattern available for transmission.
|
|
|
|
0: CCA signal not needed. Ignore the CCA setting
|
|
1: CCA signals shall be evaluated
|
|
|
|
Bit [1:0] => cca20_0 related signals
|
|
Bit [3:2] => cca20_1 related signals
|
|
...
|
|
Bit [31:30] => cca20_15 related signals
|
|
|
|
Within the 2 bits, the order is always:
|
|
Bit0: ED
|
|
Bit1: GI
|
|
|
|
NOTE: HW Sch takes care of MUXing ED1/ED2 with ED0 and MUXing
|
|
GI1 with GI0. Hence this field should be set to 0x55555555
|
|
for chips not supporting GI-correlation and 0xFFFFFFFF
|
|
for chips that support, usually.
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_TRANSMIT_CCA_BITMAP_OFFSET 0x0000000000000010
|
|
#define TX_FES_SETUP_TRANSMIT_CCA_BITMAP_LSB 32
|
|
#define TX_FES_SETUP_TRANSMIT_CCA_BITMAP_MSB 63
|
|
#define TX_FES_SETUP_TRANSMIT_CCA_BITMAP_MASK 0xffffffff00000000
|
|
|
|
|
|
/* Description TB_RANGING
|
|
|
|
Indicates that this frame is generated for a TB ranging
|
|
sequence
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_TB_RANGING_OFFSET 0x0000000000000018
|
|
#define TX_FES_SETUP_TB_RANGING_LSB 0
|
|
#define TX_FES_SETUP_TB_RANGING_MSB 0
|
|
#define TX_FES_SETUP_TB_RANGING_MASK 0x0000000000000001
|
|
|
|
|
|
/* Description RANGING_TRIGGER_SUBTYPE
|
|
|
|
Field only valid if TB_Ranging is set
|
|
|
|
Indicates the Trigger subtype for the current ranging TF
|
|
|
|
|
|
<enum 0 TF_Poll>
|
|
<enum 1 TF_Sound>
|
|
<enum 2 TF_Secure_Sound>
|
|
<enum 3 TF_Report>
|
|
|
|
<legal 0-3>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_RANGING_TRIGGER_SUBTYPE_OFFSET 0x0000000000000018
|
|
#define TX_FES_SETUP_RANGING_TRIGGER_SUBTYPE_LSB 1
|
|
#define TX_FES_SETUP_RANGING_TRIGGER_SUBTYPE_MSB 4
|
|
#define TX_FES_SETUP_RANGING_TRIGGER_SUBTYPE_MASK 0x000000000000001e
|
|
|
|
|
|
/* Description MIN_CTS2SELF_COUNT
|
|
|
|
Field only valid when max_cts2self_count is non-zero
|
|
|
|
This is the minimum number of CTS2SELF frames that PDG should
|
|
transmit before the actual data transmission.
|
|
*/
|
|
|
|
#define TX_FES_SETUP_MIN_CTS2SELF_COUNT_OFFSET 0x0000000000000018
|
|
#define TX_FES_SETUP_MIN_CTS2SELF_COUNT_LSB 5
|
|
#define TX_FES_SETUP_MIN_CTS2SELF_COUNT_MSB 8
|
|
#define TX_FES_SETUP_MIN_CTS2SELF_COUNT_MASK 0x00000000000001e0
|
|
|
|
|
|
/* Description MAX_CTS2SELF_COUNT
|
|
|
|
Field only valid when non-zero
|
|
|
|
This is the maximum number of CTS2SELF frames that PDG is
|
|
allowed to transmit before the actual data transmission.
|
|
PDG will only use these additional frames if MPDU info from
|
|
TQM or CV-correlation info from microcode is delayed.
|
|
*/
|
|
|
|
#define TX_FES_SETUP_MAX_CTS2SELF_COUNT_OFFSET 0x0000000000000018
|
|
#define TX_FES_SETUP_MAX_CTS2SELF_COUNT_LSB 9
|
|
#define TX_FES_SETUP_MAX_CTS2SELF_COUNT_MSB 12
|
|
#define TX_FES_SETUP_MAX_CTS2SELF_COUNT_MASK 0x0000000000001e00
|
|
|
|
|
|
/* Description WIFI_RADAR_ENABLE
|
|
|
|
When set to 1, the packet is intended to be used by PHY
|
|
for WiFi radar (by sensing the reflected WiFi signal).
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_WIFI_RADAR_ENABLE_OFFSET 0x0000000000000018
|
|
#define TX_FES_SETUP_WIFI_RADAR_ENABLE_LSB 13
|
|
#define TX_FES_SETUP_WIFI_RADAR_ENABLE_MSB 13
|
|
#define TX_FES_SETUP_WIFI_RADAR_ENABLE_MASK 0x0000000000002000
|
|
|
|
|
|
/* Description RESERVED_6A
|
|
|
|
Bit 14: cqi_feedback:
|
|
Consumer: TXPCU
|
|
Producer: SCH
|
|
|
|
MSB of the expected feedback type of received CBF frame
|
|
after sending NDP or BR-Poll in case of HE/EHT sounding.
|
|
See field cbf_feedback_type above for the LSB. This field
|
|
is compared only if cbf_feedback_type_mask is set to 1.
|
|
|
|
0: compressed beamforming feedback
|
|
1: CQI feedback
|
|
|
|
<legal 0-1>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_RESERVED_6A_OFFSET 0x0000000000000018
|
|
#define TX_FES_SETUP_RESERVED_6A_LSB 14
|
|
#define TX_FES_SETUP_RESERVED_6A_MSB 31
|
|
#define TX_FES_SETUP_RESERVED_6A_MASK 0x00000000ffffc000
|
|
|
|
|
|
/* Description MONITOR_OVERRIDE_STA_31_0
|
|
|
|
Used by TXMON
|
|
|
|
LSB 32 bits of a 37-bit user bitmap with 1s denoting the
|
|
'tlv_usr' values that correspond to'Monitor override client's
|
|
|
|
|
|
When enabled in TXMON, it will discard the user-TLVs of
|
|
the users not selected by the bitmap. FW should program
|
|
this setting in line with the 'Monitor_override_sta' setting
|
|
in the 'ADDR_SEARCH_ENTRY' corresponding to each of the
|
|
clients.
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_MONITOR_OVERRIDE_STA_31_0_OFFSET 0x0000000000000018
|
|
#define TX_FES_SETUP_MONITOR_OVERRIDE_STA_31_0_LSB 32
|
|
#define TX_FES_SETUP_MONITOR_OVERRIDE_STA_31_0_MSB 63
|
|
#define TX_FES_SETUP_MONITOR_OVERRIDE_STA_31_0_MASK 0xffffffff00000000
|
|
|
|
|
|
/* Description MONITOR_OVERRIDE_STA_36_32
|
|
|
|
Used by TXMON
|
|
|
|
MSB 5 bits of a 37-bit user bitmap with 1s denoting the 'tlv_usr'
|
|
values that correspond to 'Monitor override client's
|
|
|
|
See 'Monitor_override_sta_31_0.'
|
|
|
|
Hamilton v1 did not include this (and any subsequent) word.
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_MONITOR_OVERRIDE_STA_36_32_OFFSET 0x0000000000000020
|
|
#define TX_FES_SETUP_MONITOR_OVERRIDE_STA_36_32_LSB 0
|
|
#define TX_FES_SETUP_MONITOR_OVERRIDE_STA_36_32_MSB 4
|
|
#define TX_FES_SETUP_MONITOR_OVERRIDE_STA_36_32_MASK 0x000000000000001f
|
|
|
|
|
|
/* Description RESERVED_8A
|
|
|
|
<legal 0>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_RESERVED_8A_OFFSET 0x0000000000000020
|
|
#define TX_FES_SETUP_RESERVED_8A_LSB 5
|
|
#define TX_FES_SETUP_RESERVED_8A_MSB 31
|
|
#define TX_FES_SETUP_RESERVED_8A_MASK 0x00000000ffffffe0
|
|
|
|
|
|
/* Description FW2SW_INFO
|
|
|
|
This field is provided by FW, to be logged via TXMON to
|
|
host SW. It is transparent to HW.
|
|
|
|
<legal all>
|
|
*/
|
|
|
|
#define TX_FES_SETUP_FW2SW_INFO_OFFSET 0x0000000000000020
|
|
#define TX_FES_SETUP_FW2SW_INFO_LSB 32
|
|
#define TX_FES_SETUP_FW2SW_INFO_MSB 63
|
|
#define TX_FES_SETUP_FW2SW_INFO_MASK 0xffffffff00000000
|
|
|
|
|
|
|
|
#endif // TX_FES_SETUP
|