samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
466c04dee9c73b5743d0e40a4144c6e3ae664d6f
android_kernel_samsung_sm86…/wmi/inc/wmi_unified_twt_param.h
Christopher Chopp 294f63373d qcacmn: Add wmi support for btwt wifitool commands 
Add WMI support for broadcast twt sta invitation and
sta kickoff. Additionally, update the current WMI twt
fields to include btwt recommendation and btwt persistence.

Change-Id: I88dee854557bbb8c3263f42041e0b90a07cdd27e
2020-01-19 23:40:08 -08:00

485 lines
18 KiB
C
Raw Blame History

/*
* Copyright (c) 2018-2020 The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
/*
* This file contains the API definitions for the TWT WMI APIs.
*/
#ifndef _WMI_UNIFIED_TWT_PARAM_H_
#define _WMI_UNIFIED_TWT_PARAM_H_
/**
* @pdev_id: pdev_id for identifying the MAC.
* @sta_cong_timer_ms: STA TWT congestion timer TO value in terms of ms
* @mbss_support: Flag indicating if AP TWT feature supported in
* MBSS mode or not.
* @default_slot_size: This is the default value for the TWT slot setup
* by AP (units = microseconds)
* @congestion_thresh_setup: Minimum congestion required to start setting
* up TWT sessions
* @congestion_thresh_teardown: Minimum congestion below which TWT will be
* torn down (in percent of occupied airtime)
* @congestion_thresh_critical: Threshold above which TWT will not be active
* (in percent of occupied airtime)
* @interference_thresh_teardown: Minimum interference above that TWT
* will not be active. The interference parameters use an
* abstract method of evaluating interference.
* The parameters are in percent, ranging from 0 for no
* interference, to 100 for interference extreme enough
* to completely block the signal of interest.
* @interference_thresh_setup: Minimum interference below that TWT session
* can be setup. The interference parameters use an
* abstract method of evaluating interference.
* The parameters are in percent, ranging from 0 for no
* interference, to 100 for interference extreme enough
* to completely block the signal of interest.
* @min_no_sta_setup: Minimum no of STA required to start TWT setup
* @min_no_sta_teardown: Minimum no of STA below which TWT will be torn down
* @no_of_bcast_mcast_slots: Number of default slot sizes reserved for
* BCAST/MCAST delivery
* @min_no_twt_slots: Minimum no of available slots for TWT to be operational
* @max_no_sta_twt: Max no of STA with which TWT is possible
* (must be <= the wmi_resource_config's twt_ap_sta_count value)
* * The below interval parameters have units of milliseconds.
* @mode_check_interval: Interval between two successive check to decide the
* mode of TWT. (units = milliseconds)
* @add_sta_slot_interval: Interval between decisions making to create
* TWT slots for STAs. (units = milliseconds)
* @remove_sta_slot_interval: Inrerval between decisions making to remove TWT
* slot of STAs. (units = milliseconds)
* @flags: Flag to enable or disable capabilities, example bcast twt.
*/
struct wmi_twt_enable_param {
uint32_t pdev_id;
uint32_t sta_cong_timer_ms;
uint32_t mbss_support;
uint32_t default_slot_size;
uint32_t congestion_thresh_setup;
uint32_t congestion_thresh_teardown;
uint32_t congestion_thresh_critical;
uint32_t interference_thresh_teardown;
uint32_t interference_thresh_setup;
uint32_t min_no_sta_setup;
uint32_t min_no_sta_teardown;
uint32_t no_of_bcast_mcast_slots;
uint32_t min_no_twt_slots;
uint32_t max_no_sta_twt;
uint32_t mode_check_interval;
uint32_t add_sta_slot_interval;
uint32_t remove_sta_slot_interval;
uint32_t flags;
};
/* status code of enabling TWT
* WMI_ENABLE_TWT_STATUS_OK: enabling TWT successfully completed
* WMI_ENABLE_TWT_STATUS_ALREADY_ENABLED: TWT already enabled
* WMI_ENABLE_TWT_STATUS_NOT_READY: FW not ready for enabling TWT
* WMI_ENABLE_TWT_INVALID_PARAM: invalid parameters
* WMI_ENABLE_TWT_STATUS_UNKNOWN_ERROR: enabling TWT failed with an
* unknown reason
*/
enum WMI_HOST_ENABLE_TWT_STATUS {
WMI_HOST_ENABLE_TWT_STATUS_OK,
WMI_HOST_ENABLE_TWT_STATUS_ALREADY_ENABLED,
WMI_HOST_ENABLE_TWT_STATUS_NOT_READY,
WMI_HOST_ENABLE_TWT_INVALID_PARAM,
WMI_HOST_ENABLE_TWT_STATUS_UNKNOWN_ERROR,
};
/** struct wmi_twt_enable_complete_event_param:
* @pdev_is: pdev_id for identifying the MAC.
* @status: From enum WMI_HOST_ENABLE_TWT_STATUS
*/
struct wmi_twt_enable_complete_event_param {
uint32_t pdev_id;
uint32_t status;
};
/** struct wmi_twt_disable_param:
* @pdev_id: pdev_id for identifying the MAC.
*/
struct wmi_twt_disable_param {
uint32_t pdev_id;
};
/** struct wmi_twt_disable_complete_event:
* @pdev_id: pdev_id for identifying the MAC.
*/
struct wmi_twt_disable_complete_event {
uint32_t pdev_id;
};
/* from IEEE 802.11ah section 9.4.2.200 */
enum WMI_HOST_TWT_COMMAND {
WMI_HOST_TWT_COMMAND_REQUEST_TWT = 0,
WMI_HOST_TWT_COMMAND_SUGGEST_TWT = 1,
WMI_HOST_TWT_COMMAND_DEMAND_TWT = 2,
WMI_HOST_TWT_COMMAND_TWT_GROUPING = 3,
WMI_HOST_TWT_COMMAND_ACCEPT_TWT = 4,
WMI_HOST_TWT_COMMAND_ALTERNATE_TWT = 5,
WMI_HOST_TWT_COMMAND_DICTATE_TWT = 6,
WMI_HOST_TWT_COMMAND_REJECT_TWT = 7,
};
/** struct wmi_twt_add_dialog_param -
* @vdev_id: VDEV identifier
* @peer_macaddr: peer MAC address when vdev is AP VDEV
* @dialog_id: diaglog_id (TWT dialog ID)
* This dialog ID must be unique within its vdev.
* @wake_intvl_us: TWT Wake Interval in units of us
* @wake_intvl_mantis: TWT Wake Interval Mantissa
* - wake_intvl_mantis must be <= 0xFFFF
* - wake_intvl_us must be divided evenly by wake_intvl_mantis,
* i.e., wake_intvl_us % wake_intvl_mantis == 0
* - the quotient of wake_intvl_us/wake_intvl_mantis must be
* 2 to N-th(0<=N<=31) power,
* i.e., wake_intvl_us/wake_intvl_mantis == 2^N, 0<=N<=31
* @wake_dura_us: TWT Wake Duration in units of us, must be <= 0xFFFF
* wake_dura_us must be divided evenly by 256,
* i.e., wake_dura_us % 256 == 0
* @sp_offset_us: this long time after TWT setup the 1st SP will start.
* @twt_cmd: cmd from enum WMI_HOST_TWT_COMMAND
* @flag_bcast: 0 means Individual TWT,
* 1 means Broadcast TWT
* @flag_trigger: 0 means non-Trigger-enabled TWT,
* 1 means means Trigger-enabled TWT
* @flag_flow_type: 0 means announced TWT,
* 1 means un-announced TWT
* @flag_protection: 0 means TWT protection is required,
* 1 means TWT protection is not required
* @b_twt_id0: 0 means BTWT recommendation will not be used
* 1 means BTWT recommendation will be used
* @flag_reserved: unused bits
* @b_twt_recommendation: defines types of frames tx during bTWT SP
* @b_twt_persistence: Countdown VAL frames to param update/teardown
*/
struct wmi_twt_add_dialog_param {
uint32_t vdev_id;
uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE];
uint32_t dialog_id;
uint32_t wake_intvl_us;
uint32_t wake_intvl_mantis;
uint32_t wake_dura_us;
uint32_t sp_offset_us;
enum WMI_HOST_TWT_COMMAND twt_cmd;
uint32_t
flag_bcast:1,
flag_trigger:1,
flag_flow_type:1,
flag_protection:1,
flag_b_twt_id0:1,
flag_reserved:11,
b_twt_persistence:8,
b_twt_recommendation:3;
};
/* enum - status code of adding TWT dialog
* WMI_HOST_ADD_TWT_STATUS_OK: adding TWT dialog successfully completed
* WMI_HOST_ADD_TWT_STATUS_TWT_NOT_ENABLED: TWT not enabled
* WMI_HOST_ADD_TWT_STATUS_USED_DIALOG_ID: TWT dialog ID is already used
* WMI_HOST_ADD_TWT_STATUS_INVALID_PARAM: invalid parameters
* WMI_HOST_ADD_TWT_STATUS_NOT_READY: FW not ready
* WMI_HOST_ADD_TWT_STATUS_NO_RESOURCE: FW resource exhausted
* WMI_HOST_ADD_TWT_STATUS_NO_ACK: peer AP/STA did not ACK the
* request/response frame
* WMI_HOST_ADD_TWT_STATUS_NO_RESPONSE: peer AP did not send the response frame
* WMI_HOST_ADD_TWT_STATUS_DENIED: AP did not accept the request
* WMI_HOST_ADD_TWT_STATUS_UNKNOWN_ERROR: adding TWT dialog failed with
* an unknown reason
*/
enum WMI_HOST_ADD_TWT_STATUS {
WMI_HOST_ADD_TWT_STATUS_OK,
WMI_HOST_ADD_TWT_STATUS_TWT_NOT_ENABLED,
WMI_HOST_ADD_TWT_STATUS_USED_DIALOG_ID,
WMI_HOST_ADD_TWT_STATUS_INVALID_PARAM,
WMI_HOST_ADD_TWT_STATUS_NOT_READY,
WMI_HOST_ADD_TWT_STATUS_NO_RESOURCE,
WMI_HOST_ADD_TWT_STATUS_NO_ACK,
WMI_HOST_ADD_TWT_STATUS_NO_RESPONSE,
WMI_HOST_ADD_TWT_STATUS_DENIED,
WMI_HOST_ADD_TWT_STATUS_UNKNOWN_ERROR,
};
/** struct wmi_twt_add_dialog_complete_param -
* @vdev_id: VDEV identifier
* @peer_macaddr: Peer mac address
* @dialog_id: TWT dialog ID
* @status: refer to WMI_HOST_ADD_TWT_STATUS enum
*/
struct wmi_twt_add_dialog_complete_event_param {
uint32_t vdev_id;
uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE];
uint32_t dialog_id;
uint32_t status;
};
/** struct wmi_twt_del_dialog_param -
* @vdev_id: VDEV identifier
* @peer_macaddr: Peer mac address
* @dialog_id: TWT dialog ID
* @b_twt_persistence: persistence val for b-twt
*/
struct wmi_twt_del_dialog_param {
uint32_t vdev_id;
uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE];
uint32_t dialog_id;
#ifdef WLAN_SUPPORT_BCAST_TWT
uint32_t b_twt_persistence;
#endif
};
/* status code of deleting TWT dialog
* WMI_HOST_DEL_TWT_STATUS_OK: deleting TWT dialog successfully completed
* WMI_HOST_DEL_TWT_STATUS_DIALOG_ID_NOT_EXIST: TWT dialog ID not exists
* WMI_HOST_DEL_TWT_STATUS_INVALID_PARAM: invalid parameters
* WMI_HOST_DEL_TWT_STATUS_DIALOG_ID_BUSY: FW is in the process of handling
* this dialog
* WMI_HOST_DEL_TWT_STATUS_NO_RESOURCE: FW resource exhausted
* WMI_HOST_DEL_TWT_STATUS_NO_ACK: peer AP/STA did not ACK the request/response
* frame
* WMI_HOST_DEL_TWT_STATUS_UNKNOWN_ERROR: deleting TWT dialog failed with an
* unknown reason
*/
enum WMI_HOST_DEL_TWT_STATUS {
WMI_HOST_DEL_TWT_STATUS_OK,
WMI_HOST_DEL_TWT_STATUS_DIALOG_ID_NOT_EXIST,
WMI_HOST_DEL_TWT_STATUS_INVALID_PARAM,
WMI_HOST_DEL_TWT_STATUS_DIALOG_ID_BUSY,
WMI_HOST_DEL_TWT_STATUS_NO_RESOURCE,
WMI_HOST_DEL_TWT_STATUS_NO_ACK,
WMI_HOST_DEL_TWT_STATUS_UNKNOWN_ERROR,
};
/** struct wmi_twt_del_dialog_complete_event_param -
* @vdev_id: VDEV identifier
* @peer_macaddr: Peer mac address
* @dialog_id: TWT dialog ID
* @b_twt_persistence: persistence val for b-twt
* @status: refer to WMI_HOST_DEL_TWT_STATUS enum
*/
struct wmi_twt_del_dialog_complete_event_param {
uint32_t vdev_id;
uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE];
uint32_t dialog_id;
#ifdef WLAN_SUPPORT_BCAST_TWT
uint32_t b_twt_persistence;
#endif
uint32_t status;
};
/** struct wmi_twt_pause_dialog_cmd_param -
* @vdev_id: VDEV identifier
* @peer_macaddr: Peer mac address
* @dialog_id: TWT dialog ID
*/
struct wmi_twt_pause_dialog_cmd_param {
uint32_t vdev_id;
uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE];
uint32_t dialog_id;
};
/* enum WMI_HOST_PAUSE_TWT_STATUS - status code of pausing TWT dialog
* WMI_HOST_PAUSE_TWT_STATUS_OK: pausing TWT dialog successfully completed
* WMI_HOST_PAUSE_TWT_STATUS_DIALOG_ID_NOT_EXIST: TWT dialog ID not exists
* WMI_HOST_PAUSE_TWT_STATUS_INVALID_PARAM: invalid parameters
* WMI_HOST_PAUSE_TWT_STATUS_DIALOG_ID_BUSY: FW is in the process of handling
* this dialog
* WMI_HOST_PAUSE_TWT_STATUS_NO_RESOURCE: FW resource exhausted
* WMI_HOST_PAUSE_TWT_STATUS_NO_ACK: peer AP/STA did not ACK the
* request/response frame
* WMI_HOST_PAUSE_TWT_STATUS_UNKNOWN_ERROR: pausing TWT dialog failed with an
* unknown reason
*/
enum WMI_HOST_PAUSE_TWT_STATUS {
WMI_HOST_PAUSE_TWT_STATUS_OK,
WMI_HOST_PAUSE_TWT_STATUS_DIALOG_ID_NOT_EXIST,
WMI_HOST_PAUSE_TWT_STATUS_INVALID_PARAM,
WMI_HOST_PAUSE_TWT_STATUS_DIALOG_ID_BUSY,
WMI_HOST_PAUSE_TWT_STATUS_NO_RESOURCE,
WMI_HOST_PAUSE_TWT_STATUS_NO_ACK,
WMI_HOST_PAUSE_TWT_STATUS_UNKNOWN_ERROR,
};
/** struct wmi_twt_pause_dialog_complete_event_param -
* @vdev_id: VDEV identifier
* @peer_macaddr: Peer mac address
* @dialog_id: TWT dialog ID
* @status: refer to WMI_HOST_PAUSE_TWT_STATUS
*/
struct wmi_twt_pause_dialog_complete_event_param {
uint32_t vdev_id;
uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE];
uint32_t dialog_id;
uint32_t status;
};
/** struct wmi_twt_resume_dialog_cmd_param -
* @vdev_id: VDEV identifier
* @peer_macaddr: Peer mac address
* @dialog_id: TWT dialog ID
* @sp_offset_us: this long time after TWT resumed the 1st SP will start
* @next_twt_size: Next TWT subfield Size.
* Refer IEEE 802.11ax section "9.4.1.60 TWT Information field"
*/
struct wmi_twt_resume_dialog_cmd_param {
uint32_t vdev_id;
uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE];
uint32_t dialog_id;
uint32_t sp_offset_us;
uint32_t next_twt_size;
};
/* enum WMI_HOST_RESUME_TWT_STATUS - status code of resuming TWT dialog
* WMI_HOST_RESUME_TWT_STATUS_OK: resuming TWT dialog successfully completed
* WMI_HOST_RESUME_TWT_STATUS_DIALOG_ID_NOT_EXIST: TWT dialog ID not exists
* WMI_HOST_RESUME_TWT_STATUS_INVALID_PARAM: invalid parameters
* WMI_HOST_RESUME_TWT_STATUS_DIALOG_ID_BUSY: FW is in the process of handling
* this dialog
* WMI_HOST_RESUME_TWT_STATUS_NOT_PAUSED: dialog not paused currently
* WMI_HOST_RESUME_TWT_STATUS_NO_RESOURCE: FW resource exhausted
* WMI_HOST_RESUME_TWT_STATUS_NO_ACK: peer AP/STA did not ACK the
* request/response frame
* WMI_HOST_RESUME_TWT_STATUS_UNKNOWN_ERROR: resuming TWT dialog failed with an
* unknown reason
*/
enum WMI_HOST_RESUME_TWT_STATUS {
WMI_HOST_RESUME_TWT_STATUS_OK,
WMI_HOST_RESUME_TWT_STATUS_DIALOG_ID_NOT_EXIST,
WMI_HOST_RESUME_TWT_STATUS_INVALID_PARAM,
WMI_HOST_RESUME_TWT_STATUS_DIALOG_ID_BUSY,
WMI_HOST_RESUME_TWT_STATUS_NOT_PAUSED,
WMI_HOST_RESUME_TWT_STATUS_NO_RESOURCE,
WMI_HOST_RESUME_TWT_STATUS_NO_ACK,
WMI_HOST_RESUME_TWT_STATUS_UNKNOWN_ERROR,
};
/** struct wmi_twt_resume_dialog_complete_event_param -
* @vdev_id: VDEV identifier
* @peer_macaddr: Peer mac address
* @dialog_id: TWT dialog ID
* @status: refer to WMI_HOST_RESUME_TWT_STATUS
*/
struct wmi_twt_resume_dialog_complete_event_param {
uint32_t vdev_id;
uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE];
uint32_t dialog_id;
uint32_t status;
};
#ifdef WLAN_SUPPORT_BCAST_TWT
/** struct wmi_twt_btwt_invite_sta_cmd_param -
* @vdev_id: VDEV identifier
* @peer_macaddr: Peer mac address
* @dialog_id: TWT dialog ID
*/
struct wmi_twt_btwt_invite_sta_cmd_param {
uint32_t vdev_id;
uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE];
uint32_t dialog_id;
};
/* enum WMI_HOST_INVITATION_TWT_BTWT_STATUS - status code of TWT Invitation
* dialog
* WMI_HOST_INVITATION_TWT_BTWT_STATUS_OK: BTWT invitation successfully
* completed
* WMI_HOST_INVITATION_TWT_TWT_STATUS_DIALOG_ID_NOT_EXIST: BTWT dialog ID not
* exists
* WMI_HOST_INVITATION_TWT_BTWT_STATUS_INVALID_PARAM: invalid parameters
* WMI_HOST_INVITATION_TWT_BTWT_STATUS_DIALOG_ID_BUSY: FW is in the process of
* handling this dialog
* WMI_HOST_INVITATION_TWT_BTWT_STATUS_NO_RESOURCE: FW resource exhausted
* WMI_HOST_INVITATION_TWT_BTWT_STATUS_NO_ACK: peer AP/STA did not ACK the
* request/response frame
* WMI_HOST_INVITATION_TWT_BTWT_STATUS_UNKNOWN_ERROR: BTWT invitation failed
* with an unknown reason
*/
enum WMI_HOST_INVITATION_TWT_BTWT_STATUS {
WMI_HOST_INVITATION_TWT_BTWT_STATUS_OK,
WMI_HOST_INVITATION_TWT_BTWT_STATUS_DIALOG_ID_NOT_EXIST,
WMI_HOST_INVITATION_TWT_BTWT_STATUS_INVALID_PARAM,
WMI_HOST_INVITATION_TWT_BTWT_STATUS_DIALOG_ID_BUSY,
WMI_HOST_INVITATION_TWT_BTWT_STATUS_NO_RESOURCE,
WMI_HOST_INVITATION_TWT_BTWT_STATUS_NO_ACK,
WMI_HOST_INVITATION_TWT_BTWT_STATUS_UNKNOWN_ERROR,
};
/** struct wmi_twt_btwt_invite_sta_complete_event_param -
* @vdev_id: VDEV identifier
* @peer_macaddr: Peer mac address
* @dialog_id: BTWT dialog ID
* @status: refer to WMI_HOST_INVITATION_TWT_BTWT_STATUS
*/
struct wmi_twt_btwt_invite_sta_complete_event_param {
uint32_t vdev_id;
uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE];
uint32_t dialog_id;
uint32_t status;
};
/** struct wmi_twt_btwt_remove_sta_cmd_param -
* @vdev_id: VDEV identifier
* @peer_macaddr: Peer mac address
* @dialog_id: BTWT dialog ID
*/
struct wmi_twt_btwt_remove_sta_cmd_param {
uint32_t vdev_id;
uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE];
uint32_t dialog_id;
};
/* enum WMI_HOST_KICKOFF_TWT_BTWT_STATUS - status code of resuming TWT dialog
* WMI_HOST_KICKOFF_TWT_BTWT_STATUS_OK: TWT kickoff successfully completed
* WMI_HOST_KICKOFF_TWT_BTWT_STATUS_DIALOG_ID_NOT_EXIST: BTWT dialog ID not
* exists
* WMI_HOST_KICKOFF_TWT_BTWT_STATUS_INVALID_PARAM: invalid parameters
* WMI_HOST_KICKOFF_TWT_BTWT_STATUS_DIALOG_ID_BUSY: FW is in the process of
* handling this dialog
* WMI_HOST_KICKOFF_TWT_BTWT_STATUS_NOT_PAUSED: Dialog not currently paused
* WMI_HOST_KICKOFF_TWT_BTWT_STATUS_NO_RESOURCE: FW resource exhausted
* WMI_HOST_KICKOFF_TWT_BTWT_STATUS_NO_ACK: peer AP/STA did not ACK the
* request/response frame
* WMI_HOST_KICKOFF_TWT_BTWT_STATUS_UNKNOWN_ERROR: BTWT kickoff failed with an
* unknown reason
*/
enum WMI_HOST_KICKOFF_TWT_BTWT_STATUS {
WMI_HOST_KICKOFF_TWT_BTWT_STATUS_OK,
WMI_HOST_KICKOFF_TWT_BTWT_STATUS_DIALOG_ID_NOT_EXIST,
WMI_HOST_KICKOFF_TWT_BTWT_STATUS_INVALID_PARAM,
WMI_HOST_KICKOFF_TWT_BTWT_STATUS_DIALOG_ID_BUSY,
WMI_HOST_KICKOFF_TWT_BTWT_STATUS_NOT_PAUSED,
WMI_HOST_KICKOFF_TWT_BTWT_STATUS_NO_RESOURCE,
WMI_HOST_KICKOFF_TWT_BTWT_STATUS_NO_ACK,
WMI_HOST_KICKOFF_TWT_BTWT_STATUS_UNKNOWN_ERROR,
};
/** struct wmi_twt_btwt_remove_sta_complete_event_param -
* @vdev_id: VDEV identifier
* @peer_macaddr: Peer mac address
* @dialog_id: BTWT dialog ID
* @status: refer to WMI_HOST_KICKOFF_TWT_BTWT_STATUS
*/
struct wmi_twt_btwt_remove_sta_complete_event_param {
uint32_t vdev_id;
uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE];
uint32_t dialog_id;
uint32_t status;
};
#endif
#endif /* _WMI_UNIFIED_TWT_PARAM_H_ */
Reference in New Issue View Git Blame Copy Permalink