samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Vork 0
Code Kwesties Pull-aanvragen Actions Packages Projecten Publicaties Wiki Activiteit
Files
360acd2d25a42e59814924d20a2a962c9ac0474d
android_kernel_samsung_sm86…/configs/default_defconfig
Jia Ding e6afd40dd6 qcacld-3.0: Allow to vote link for STA mode 
On MDM platforms, STA only IPA offload is supported.
Therefore there'll be scenarios when STA is connected
and APPS is suspended, IPA offload traffic will still
flow through WLAN HW.

Thus define a feature flag FEATURE_STA_MODE_VOTE_LINK
and allow to vote link for STA mode on MDM platforms.

Change-Id: I5c7aa3b35e3cd56249a5b34996fcea538b0da69d
CRs-Fixed: 2803802
2020-11-12 03:28:25 -08:00

1197 regels
27 KiB
Plaintext
Ruw Blame Geschiedenis

ifeq ($(CONFIG_CNSS_QCA6290), y)
ifeq ($(CONFIG_CNSS_EMULATION), y)
CONFIG_QCA_WIFI_NAPIER_EMULATION := y
endif
CONFIG_LITHIUM := y
CONFIG_QCA6290_11AX := y
CONFIG_WLAN_FEATURE_11AX := y
CONFIG_WLAN_FEATURE_DFS_OFFLOAD := y
CONFIG_IPA3 := n
endif
ifeq ($(CONFIG_CNSS_QCA6390), y)
ifeq ($(CONFIG_CNSS_EMULATION), y)
CONFIG_QCA_WIFI_NAPIER_EMULATION := y
endif
CONFIG_LITHIUM := y
CONFIG_WLAN_FEATURE_11AX := y
CONFIG_WLAN_FEATURE_DFS_OFFLOAD := y
ifeq ($(CONFIG_ARCH_SDM845), y)
CONFIG_IPA3 := n
endif
CONFIG_SCALE_INCLUDES := y
CONFIG_HASTINGS_BT_WAR := y
CONFIG_WDI3_IPA_OVER_GSI :=y
CONFIG_DIRECT_BUF_RX_ENABLE := y
CONFIG_WMI_DBR_SUPPORT := y
CONFIG_MORE_TX_DESC := y
endif
ifeq ($(CONFIG_CNSS_QCA6490), y)
CONFIG_DIRECT_BUF_RX_ENABLE := y
CONFIG_WMI_DBR_SUPPORT := y
CONFIG_WLAN_CFR_ENABLE := y
CONFIG_WLAN_ENH_CFR_ENABLE := y
ifeq ($(CONFIG_CNSS_EMULATION), y)
CONFIG_QCA_WIFI_NAPIER_EMULATION := y
endif
CONFIG_LITHIUM := y
CONFIG_WLAN_FEATURE_11AX := y
CONFIG_WLAN_FEATURE_DFS_OFFLOAD := y
ifeq ($(CONFIG_ARCH_SDM845), y)
CONFIG_IPA3 := n
endif
CONFIG_SCALE_INCLUDES := y
CONFIG_HASTINGS_BT_WAR := y
CONFIG_WDI3_IPA_OVER_GSI :=y
CONFIG_PCIE_GEN_SWITCH := y
CONFIG_GENERIC_SHADOW_REGISTER_ACCESS_ENABLE :=y
endif
ifeq ($(CONFIG_CNSS_QCA6750), y)
ifeq ($(CONFIG_CNSS_EMULATION), y)
CONFIG_QCA_WIFI_NAPIER_EMULATION := y
endif
CONFIG_LITHIUM := y
CONFIG_WLAN_FEATURE_11AX := y
CONFIG_WLAN_FEATURE_DFS_OFFLOAD := y
CONFIG_DIRECT_BUF_RX_ENABLE := y
CONFIG_WLAN_CFR_ENABLE := y
CONFIG_WMI_DBR_SUPPORT := y
CONFIG_WLAN_ENH_CFR_ENABLE := y
ifeq ($(CONFIG_ARCH_SDM845), y)
CONFIG_IPA3 := n
endif
CONFIG_SCALE_INCLUDES := y
CONFIG_HASTINGS_BT_WAR := y
CONFIG_WDI3_IPA_OVER_GSI :=y
CONFIG_HOST_WAKEUP_OVER_QMI := y
CONFIG_WLAN_FEATURE_WMI_DIAG_OVER_CE7 := y
endif
ifeq ($(CONFIG_CLD_HL_SDIO_CORE), y)
CONFIG_QCA_WIFI_SDIO := y
ifndef CONFIG_SDIO_TRANSFER
CONFIG_SDIO_TRANSFER = mailbox
endif
endif
ifeq ($(CONFIG_QCA_WIFI_SDIO), y)
CONFIG_ROME_IF = sdio
endif
ifeq ($(CONFIG_ICNSS), m)
CONFIG_ICNSS_MODULE := y
endif
ifeq ($(CONFIG_CNSS), m)
CONFIG_CNSS_MODULE := y
endif
ifeq ($(CONFIG_CNSS2), m)
CONFIG_CNSS2_MODULE := y
endif
ifeq ($(CONFIG_ICNSS2), m)
CONFIG_ICNSS2_MODULE := y
endif
ifeq ($(CONFIG_CNSS_GENL), m)
CONFIG_CNSS_GENL_MODULE := y
endif
ifeq (y,$(findstring y,$(CONFIG_ICNSS) $(CONFIG_ICNSS_MODULE)))
CONFIG_ROME_IF = snoc
CONFIG_QCA_WIFI_SDIO := n
CONFIG_PLD_SNOC_ICNSS_FLAG := y
endif
ifeq (y,$(findstring y,$(CONFIG_ICNSS2) $(CONFIG_ICNSS2_MODULE)))
ifeq ($(CONFIG_CNSS_QCA6750), y)
CONFIG_ROME_IF = ipci
CONFIG_PLD_IPCI_ICNSS_FLAG := y
else
CONFIG_ROME_IF = snoc
CONFIG_QCA_WIFI_SDIO := n
CONFIG_ICNSS2_HELIUM := y
CONFIG_PLD_SNOC_ICNSS_FLAG := y
endif
endif
ifdef CONFIG_IPCIE_FW_SIM
CONFIG_ROME_IF = ipci
endif
ifeq (y,$(findstring y,$(CONFIG_CNSS) $(CONFIG_CNSS_MODULE) $(CONFIG_CNSS2) $(CONFIG_CNSS2_MODULE)))
ifndef CONFIG_ROME_IF
#use pci as default interface
ifndef CONFIG_IPCIE_FW_SIM
CONFIG_ROME_IF = pci
endif
endif
endif
# Make WLAN as open-source driver by default
WLAN_OPEN_SOURCE := y
ifeq (y,$(findstring y,$(CONFIG_ICNSS) $(CONFIG_ICNSS_MODULE) $(CONFIG_ICNSS2_HELIUM)))
CONFIG_HELIUMPLUS := y
CONFIG_64BIT_PADDR := y
CONFIG_FEATURE_TSO := y
CONFIG_FEATURE_TSO_DEBUG := y
ifeq ($(CONFIG_INET_LRO), y)
CONFIG_WLAN_LRO := y
else
CONFIG_WLAN_LRO := n
endif
endif
ifneq ($(DEVELOPER_DISABLE_BUILD_TIMESTAMP), y)
ifneq ($(WLAN_DISABLE_BUILD_TAG), y)
CONFIG_BUILD_TAG := y
endif
endif
ifeq ($(CONFIG_ARCH_MDM9630), y)
CONFIG_MOBILE_ROUTER := y
endif
ifeq ($(CONFIG_ARCH_MDM9640), y)
CONFIG_MOBILE_ROUTER := y
endif
ifeq ($(CONFIG_ARCH_SDX20), y)
CONFIG_MOBILE_ROUTER := y
endif
ifeq ($(CONFIG_ARCH_SDXPRAIRIE), y)
CONFIG_MOBILE_ROUTER := y
endif
ifeq ($(CONFIG_ARCH_MSM8917), y)
ifeq ($(CONFIG_ROME_IF), sdio)
CONFIG_WLAN_SYNC_TSF_PLUS := y
endif
endif
ifeq (y,$(findstring y,$(CONFIG_ARCH_QCS405) $(CONFIG_ARCH_QCS403)))
CONFIG_ARCH_QCS40X := y
endif
ifeq ($(CONFIG_ARCH_QCS40X), y)
CONFIG_WLAN_SYNC_TSF_PLUS := y
CONFIG_WLAN_SYNC_TSF_PLUS_NOIRQ := y
CONFIG_RX_PERFORMANCE := y
CONFIG_TGT_NUM_MSDU_DESC := 900
CONFIG_MULTI_IF_LOG := y
CONFIG_DFS_PRI_MULTIPLIER := y
CONFIG_DFS_OVERRIDE_RF_THRESHOLD := y
CONFIG_WLAN_FEATURE_LL_MODE := y
CONFIG_WLAN_CLD_PM_QOS := y
endif
CONFIG_WLAN_FEATURE_MBSSID := y
#Flag to enable Legacy Fast Roaming3(LFR3)
ifeq (y,$(findstring y,$(CONFIG_HELIUMPLUS) $(CONFIG_LITHIUM)))
CONFIG_QCACLD_WLAN_LFR3 := y
else
CONFIG_QCACLD_WLAN_LFR2 := y
endif
ifneq ($(CONFIG_MOBILE_ROUTER), y)
#Flag to enable TDLS feature
CONFIG_QCOM_TDLS := y
CONFIG_WLAN_SYSFS := y
ifeq ($(CONFIG_WLAN_SYSFS), y)
CONFIG_WLAN_SYSFS_STA_INFO := y
CONFIG_WLAN_SYSFS_CHANNEL := y
CONFIG_WLAN_SYSFS_FW_MODE_CFG := y
CONFIG_WLAN_SYSFS_MEM_STATS := y
CONFIG_WLAN_REASSOC := y
CONFIG_WLAN_SYSFS_CONNECT_INFO := y
CONFIG_WLAN_SCAN_DISABLE := y
CONFIG_WLAN_SYSFS_DCM := y
CONFIG_WLAN_WOW_ITO := y
CONFIG_WLAN_WOWL_ADD_PTRN := y
CONFIG_WLAN_WOWL_DEL_PTRN := y
CONFIG_WLAN_SYSFS_TX_STBC := y
CONFIG_WLAN_SYSFS_WLAN_DBG := y
CONFIG_WLAN_TXRX_FW_ST_RST := y
CONFIG_WLAN_GTX_BW_MASK := y
CONFIG_WLAN_SYSFS_SCAN_CFG := y
CONFIG_WLAN_SYSFS_MONITOR_MODE_CHANNEL := y
CONFIG_WLAN_SYSFS_RADAR := y
CONFIG_WLAN_SYSFS_RTS_CTS := y
CONFIG_WLAN_SYSFS_HE_BSS_COLOR := y
CONFIG_WLAN_TXRX_FW_STATS := y
CONFIG_WLAN_TXRX_STATS := y
CONFIG_WLAN_SYSFS_DP_TRACE := y
CONFIG_WLAN_SYSFS_STATS := y
ifeq ($(CONFIG_QCOM_TDLS), y)
CONFIG_WLAN_SYSFS_TDLS_PEERS := y
endif
CONFIG_WLAN_SYSFS_TEMPERATURE := y
CONFIG_WLAN_THERMAL_CFG := y
CONFIG_WLAN_DL_MODES := y
endif
CONFIG_WLAN_POWER_DEBUG := y
#Enable Beacon Reception Stats
CONFIG_FEATURE_BECN_STATS := y
endif
CONFIG_WLAN_FEATURE_MEDIUM_ASSESS := y
#Disable the Export Symbol config
CONFIG_WLAN_DISABLE_EXPORT_SYMBOL := y
CONFIG_QCACLD_FEATURE_GREEN_AP := y
#Flag to enable Android Packet Filtering
CONFIG_QCACLD_FEATURE_APF := y
#Flag to enable SARv1 -> SARv2 conversion
CONFIG_WLAN_FEATURE_SARV1_TO_SARV2 := n
#Flag to enable get firmware state
CONFIG_QCACLD_FEATURE_FW_STATE := y
#Flag to enable set coex configuration
CONFIG_QCACLD_FEATURE_COEX_CONFIG := n
#Flag to enable get hw capability
ifeq ($(CONFIG_ARCH_QCS40X), y)
CONFIG_QCACLD_FEATURE_HW_CAPABILITY := y
endif
ifeq ($(CONFIG_ARCH_MSM8998), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_ARCH_SDM845), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_ARCH_SM8150), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_HELIUMPLUS), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_ARCH_KONA), y)
CONFIG_QCACLD_FEATURE_METERING := y
CONFIG_WDI3_STATS_UPDATE := y
CONFIG_WLAN_SYNC_TSF_TIMER := y
endif
ifeq ($(CONFIG_ARCH_LAHAINA), y)
CONFIG_QCACLD_FEATURE_METERING := y
CONFIG_WDI3_STATS_UPDATE := y
ifeq ($(CONFIG_CNSS_QCA6490), y)
CONFIG_WBM_IDLE_LSB_WR_CNF_WAR := y
endif
endif
#Flag to enable Fast Transition (11r) feature
CONFIG_QCOM_VOWIFI_11R := y
#Flag to enable disable ACTION OUI feature
CONFIG_WLAN_FEATURE_ACTION_OUI := y
#Flag to enable Adaptive 11r feature
CONFIG_ADAPTIVE_11R := y
#Flag to enable sae single pmk feature
CONFIG_SAE_SINGLE_PMK := y
#Flag to enable mscs feature
CONFIG_FEATURE_MSCS := y
#Flag to enable FILS Feature (11ai)
CONFIG_WLAN_FEATURE_FILS := y
ifneq ($(CONFIG_QCA_CLD_WLAN),)
ifeq (y,$(findstring y,$(CONFIG_CNSS) $(CONFIG_CNSS_MODULE) $(CONFIG_CNSS2) \
$(CONFIG_CNSS2_MODULE) $(CONFIG_ICNSS) $(CONFIG_ICNSS_MODULE) \
$(CONFIG_ICNSS2) $(CONFIG_ICNSS2_MODULE)))
#Flag to enable Protected Management Frames (11w) feature
CONFIG_WLAN_FEATURE_11W := y
#Flag to enable LTE CoEx feature
CONFIG_QCOM_LTE_COEX := y
ifneq ($(CONFIG_MOBILE_ROUTER), y)
#Flag to enable LPSS feature
CONFIG_WLAN_FEATURE_LPSS := y
endif
endif
endif
#Flag to enable Protected Management Frames (11w) feature
ifeq ($(CONFIG_ROME_IF),usb)
CONFIG_WLAN_FEATURE_11W := y
endif
ifeq ($(CONFIG_ROME_IF),sdio)
CONFIG_WLAN_FEATURE_11W := y
endif
#Flag to enable the tx desc sanity check
ifeq ($(CONFIG_ROME_IF),usb)
CONFIG_QCA_TXDESC_SANITY_CHECKS := y
endif
ifneq ($(CONFIG_MOBILE_ROUTER), y)
#Flag to enable NAN
CONFIG_QCACLD_FEATURE_NAN := y
endif
#Flag to enable Linux QCMBR feature as default feature
ifeq ($(CONFIG_ROME_IF),usb)
CONFIG_LINUX_QCMBR :=y
endif
CONFIG_FEATURE_EPPING := y
#Flag to enable offload packets feature
CONFIG_WLAN_OFFLOAD_PACKETS := y
#enable TSF get feature
CONFIG_WLAN_SYNC_TSF := y
#Enable DSRC feature
ifeq ($(CONFIG_QCA_WIFI_SDIO), y)
CONFIG_WLAN_FEATURE_DSRC := y
endif
ifneq ($(CONFIG_ROME_IF),usb)
#Flag to enable SAE
CONFIG_WLAN_FEATURE_SAE := y
ifneq ($(CONFIG_ROME_IF),sdio)
#Flag to enable DISA
CONFIG_WLAN_FEATURE_DISA := y
#Flag to enable FIPS
CONFIG_WLAN_FEATURE_FIPS := y
#Flag to enable Fast Path feature
ifneq ($(CONFIG_LITHIUM), y)
CONFIG_WLAN_FASTPATH := y
endif
# Flag to enable NAPI
CONFIG_WLAN_NAPI := y
CONFIG_WLAN_NAPI_DEBUG := n
# Flag to enable FW based TX Flow control
ifeq ($(CONFIG_LITHIUM), y)
CONFIG_WLAN_TX_FLOW_CONTROL_V2 := y
else
CONFIG_WLAN_TX_FLOW_CONTROL_V2 := n
endif
endif
endif
CONFIG_POWER_MANAGEMENT_OFFLOAD := y
ifeq ($(CONFIG_ROME_IF), snoc)
CONFIG_WLAN_TX_FLOW_CONTROL_V2 := y
endif
ifeq ($(CONFIG_ARCH_QCS40X), y)
CONFIG_WLAN_TX_FLOW_CONTROL_V2 := n
# Flag to improve TCP TX throughput for both
# CONFIG_WLAN_TX_FLOW_CONTROL_LEGACY and CONFIG_WLAN_TX_FLOW_CONTROL_V2
# disabled platform, avoid frame drop in driver
CONFIG_WLAN_PDEV_TX_FLOW_CONTROL := y
endif
# Flag to enable LFR Subnet Detection
CONFIG_LFR_SUBNET_DETECTION := y
# Flag to enable MCC to SCC switch feature
CONFIG_MCC_TO_SCC_SWITCH := y
ifeq ($(CONFIG_SLUB_DEBUG), y)
# Enable Obj Mgr Degug services if slub build
CONFIG_WLAN_OBJMGR_DEBUG:= y
CONFIG_MPC_UT_FRAMEWORK := y
CONFIG_LOCK_STATS_ON:= y
CONFIG_WLAN_OBJMGR_REF_ID_TRACE := y
endif
ifeq ($(CONFIG_WLAN_SYSFS), y)
ifeq ($(CONFIG_MPC_UT_FRAMEWORK), y)
CONFIG_WLAN_SYSFS_RANGE_EXT := y
endif
endif
ifeq (y,$(findstring y,$(CONFIG_QCA_WIFI_SDIO) $(CONFIG_HIF_USB)))
CONFIG_HL_DP_SUPPORT := y
else
CONFIG_LL_DP_SUPPORT := y
endif
ifeq ($(CONFIG_ROME_IF),pci)
ifneq ($(CONFIG_WLAN_TX_FLOW_CONTROL_V2), y)
ifneq ($(CONFIG_LITHIUM), y)
CONFIG_WLAN_TX_FLOW_CONTROL_LEGACY := y
endif
endif
endif
#Whether have QMI support
CONFIG_QMI_SUPPORT := y
ifeq (y,$(findstring y,$(CONFIG_ICNSS) $(CONFIG_ICNSS_MODULE) $(CONFIG_ICNSS2_HELIUM)))
CONFIG_WIFI_3_0_ADRASTEA := y
CONFIG_ADRASTEA_RRI_ON_DDR := y
# Enable athdiag procfs debug support for adrastea
CONFIG_ATH_PROCFS_DIAG_SUPPORT := y
# Enable 11AC TX compact feature for adrastea
CONFIG_ATH_11AC_TXCOMPACT := y
ifeq ($(CONFIG_QMI_SUPPORT), y)
CONFIG_ADRASTEA_SHADOW_REGISTERS := y
endif
endif
# Enable fw stats version 2
ifeq (y,$(findstring y,$(CONFIG_HELIUMPLUS) $(CONFIG_LITHIUM)))
CONFIG_AR900B := y
endif
# NOTE: CONFIG_64BIT_PADDR requires CONFIG_HELIUMPLUS
ifeq ($(CONFIG_HELIUMPLUS), y)
ifeq ($(CONFIG_64BIT_PADDR), y)
CONFIG_HTT_PADDR64 := y
endif
ifeq (y,$(filter y,$(CONFIG_CNSS2_DEBUG) $(CONFIG_SLUB_DEBUG_ON)))
CONFIG_OL_RX_INDICATION_RECORD := y
CONFIG_TSOSEG_DEBUG := y
CONFIG_HIF_LARGE_CE_RING_HISTORY := 8192
endif
endif #CONFIG_HELIUMPLUS
ifeq ($(CONFIG_LITHIUM), y)
CONFIG_RX_DEFRAG_DO_NOT_REINJECT := y
#
# Enable VERBOSE debug INI mechanism
#
CONFIG_VERBOSE_DEBUG := y
CONFIG_RX_DESC_SANITY_WAR := y
ifeq ($(CONFIG_PCI_MSM), y)
CONFIG_FEATURE_HAL_DELAYED_REG_WRITE := y
endif
#
# Enable Shadow V2 for all lithium platform
#
CONFIG_SHADOW_V2 := y
ifeq ($(CONFIG_CNSS_QCA6290), y)
CONFIG_QCA6290_HEADERS_DEF := y
CONFIG_QCA_WIFI_QCA6290 := y
endif
ifeq ($(CONFIG_CNSS_QCA6390), y)
CONFIG_QCA6390_HEADERS_DEF := y
CONFIG_QCA_WIFI_QCA6390 := y
endif
ifeq ($(CONFIG_CNSS_QCA6490), y)
CONFIG_QCA6490_HEADERS_DEF := y
CONFIG_QCA_WIFI_QCA6490 := y
endif
ifeq ($(CONFIG_CNSS_QCA6750), y)
CONFIG_QCA6750_HEADERS_DEF := y
CONFIG_QCA_WIFI_QCA6750 := y
CONFIG_FEATURE_HAL_DELAYED_REG_WRITE := n
endif
ifeq ($(CONFIG_CNSS_QCA6750), y)
CONFIG_BUS_AUTO_SUSPEND := y
endif
CONFIG_QCA_WIFI_QCA8074 := y
CONFIG_QCA_WIFI_QCA8074_VP := y
CONFIG_DP_INTR_POLL_BASED := y
CONFIG_TX_PER_PDEV_DESC_POOL := y
CONFIG_DP_TRACE := y
CONFIG_FEATURE_TSO := y
CONFIG_FEATURE_FORCE_WAKE := y
CONFIG_DP_LFR := y
CONFIG_DUP_RX_DESC_WAR := y
CONFIG_HTT_PADDR64 := y
CONFIG_RX_OL := y
CONFIG_TX_TID_OVERRIDE := y
CONFIG_DP_TXRX_SOC_ATTACH := y
CONFIG_WLAN_CLD_PM_QOS := y
CONFIG_WLAN_CLD_DEV_PM_QOS := y
CONFIG_DISABLE_DP_STATS := n
CONFIG_MAX_ALLOC_PAGE_SIZE := y
CONFIG_REO_DESC_DEFER_FREE := y
CONFIG_RXDMA_ERR_PKT_DROP := y
CONFIG_DELIVERY_TO_STACK_STATUS_CHECK := y
CONFIG_WLAN_TRACE_HIDE_MAC_ADDRESS := n
CONFIG_DP_MEM_PRE_ALLOC := y
ifeq ($(CONFIG_FEATURE_TSO), y)
CONFIG_FEATURE_TSO_STATS := y
CONFIG_TSO_DEBUG_LOG_ENABLE := y
endif
ifeq ($(CONFIG_DISABLE_DP_STATS), y)
CONFIG_FEATURE_TSO_STATS := n
endif
endif
# As per target team, build is done as follows:
# Defconfig : build with default flags
# Slub : defconfig + CONFIG_SLUB_DEBUG=y +
# CONFIG_SLUB_DEBUG_ON=y + CONFIG_PAGE_POISONING=y
# Perf : Using appropriate msmXXXX-perf_defconfig
#
# Shipment builds (user variants) should not have any debug feature
# enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds
# are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since
# there is no other way to identify defconfig builds, QCOMs internal
# representation of perf builds (identified using the string 'perf'),
# is used to identify if the build is a slub or defconfig one. This
# way no critical debug feature will be enabled for perf and shipment
# builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT
# config.
ifneq ($(TARGET_BUILD_VARIANT),user)
CONFIG_FEATURE_PKTLOG := y
CONFIG_WLAN_DEBUG_CRASH_INJECT := y
endif
#Disable pktlog feature for lithium based target
ifeq ($(CONFIG_LITHIUM), y)
CONFIG_FEATURE_PKTLOG := n
endif
#Enable WLAN/Power debugfs feature only if debug_fs is enabled
ifeq ($(CONFIG_DEBUG_FS), y)
# Flag to enable debugfs. Depends on CONFIG_DEBUG_FS in kernel
# configuration.
CONFIG_WLAN_DEBUGFS := y
# Flag to enable streamfs. Depends on CONFIG_DEBUG_FS and
# CONFIG_RELAY in kernel configuration.
ifeq ($(CONFIG_RELAY), y)
CONFIG_WLAN_STREAMFS := y
endif
endif
ifeq ($(CONFIG_WLAN_DEBUGFS), y)
CONFIG_WLAN_MWS_INFO_DEBUGFS := y
CONFIG_WLAN_FEATURE_MIB_STATS := y
endif
# Feature flags which are not (currently) configurable via Kconfig
#Whether to build debug version
BUILD_DEBUG_VERSION := y
#Enable this flag to build driver in diag version
BUILD_DIAG_VERSION := y
ifeq ($(CONFIG_SLUB_DEBUG), y)
PANIC_ON_BUG := y
WLAN_WARN_ON_ASSERT := y
else ifeq ($(CONFIG_PERF_DEBUG), y)
PANIC_ON_BUG := y
WLAN_WARN_ON_ASSERT := y
else
PANIC_ON_BUG := n
WLAN_WARN_ON_ASSERT := n
endif
# Compile all log levels by default
CONFIG_WLAN_LOG_FATAL := y
CONFIG_WLAN_LOG_ERROR := y
CONFIG_WLAN_LOG_WARN := y
CONFIG_WLAN_LOG_INFO := y
CONFIG_WLAN_LOG_DEBUG := y
CONFIG_WLAN_LOG_ENTER := y
CONFIG_WLAN_LOG_EXIT := y
#Enable OL debug and wmi unified functions
CONFIG_ATH_PERF_PWR_OFFLOAD := y
#Disable packet log
CONFIG_REMOVE_PKT_LOG := n
#Enable 11AC TX
ifeq ($(CONFIG_ROME_IF),pci)
CONFIG_ATH_11AC_TXCOMPACT := y
endif
ifeq ($(CONFIG_ROME_IF),ipci)
CONFIG_ATH_11AC_TXCOMPACT := y
endif
ifeq ($(CONFIG_ROME_IF),usb)
CONFIG_ATH_11AC_TXCOMPACT := n
endif
#Enable PCI specific APIS (dma, etc)
ifeq ($(CONFIG_ROME_IF),pci)
CONFIG_HIF_PCI := y
endif
ifeq ($(CONFIG_ROME_IF),ipci)
CONFIG_HIF_IPCI := y
endif
#Enable USB specific APIS
ifeq ($(CONFIG_ROME_IF),usb)
CONFIG_HIF_USB := y
endif
#Enable SDIO specific APIS
ifeq ($(CONFIG_ROME_IF),sdio)
CONFIG_HIF_SDIO := y
CONFIG_TX_DESC_HI_PRIO_RESERVE := y
CONFIG_FEATURE_HL_GROUP_CREDIT_FLOW_CONTROL := y
CONFIG_TGT_NUM_MSDU_DESC := 0
endif
ifeq ($(CONFIG_ROME_IF),snoc)
CONFIG_HIF_SNOC:= y
endif
# enable/disable feature flags based upon mobile router profile
ifeq ($(CONFIG_MOBILE_ROUTER), y)
CONFIG_FEATURE_WLAN_MCC_TO_SCC_SWITCH := y
CONFIG_FEATURE_WLAN_AUTO_SHUTDOWN := y
CONFIG_FEATURE_WLAN_AP_AP_ACS_OPTIMIZE := y
CONFIG_FEATURE_WLAN_STA_4ADDR_SCHEME := y
CONFIG_MDM_PLATFORM := y
ifneq ($(CONFIG_ARCH_SDXPRAIRIE), y)
CONFIG_FEATURE_WLAN_STA_AP_MODE_DFS_DISABLE := y
endif
CONFIG_FEATURE_AP_MCC_CH_AVOIDANCE := y
CONFIG_FEATURE_STA_MODE_VOTE_LINK := y
else
CONFIG_QCOM_ESE := y
CONFIG_WLAN_OPEN_P2P_INTERFACE := y
CONFIG_WLAN_ENABLE_SOCIAL_CHANNELS_5G_ONLY := y
endif
#enable 4addr support for QCS40X
ifeq ($(CONFIG_ARCH_QCS40X), y)
CONFIG_FEATURE_WLAN_STA_4ADDR_SCHEME := y
endif
#Enable power management suspend/resume functionality to PCI
CONFIG_ATH_BUS_PM := y
#Enable FLOWMAC module support
CONFIG_ATH_SUPPORT_FLOWMAC_MODULE := n
#Enable spectral support
CONFIG_ATH_SUPPORT_SPECTRAL := n
#Define the legacy pktlog
ifeq ($(CONFIG_REMOVE_PKT_LOG), n)
ifeq ($(CONFIG_HELIUMPLUS), y)
CONFIG_PKTLOG_LEGACY := y
endif
#Customize DSCP_to-UP map based on RFC8325
ifeq ($(CONFIG_HELIUMPLUS), y)
CONFIG_WLAN_CUSTOM_DSCP_UP_MAP := y
CONFIG_WLAN_SEND_DSCP_UP_MAP_TO_FW := y
endif
ifeq ($(CONFIG_LITHIUM), y)
CONFIG_WLAN_CUSTOM_DSCP_UP_MAP := y
endif
ifeq ($(CONFIG_ARCH_BENGAL), y)
CONFIG_SMMU_S1_UNMAP := y
endif
ifeq ($(CONFIG_ICNSS2_HELIUM), y)
CONFIG_SMMU_S1_UNMAP := y
endif
ifeq ($(CONFIG_ROME_IF), sdio)
CONFIG_PKTLOG_LEGACY := y
endif
ifeq ($(CONFIG_ROME_IF), pci)
CONFIG_PKTLOG_LEGACY := y
endif
ifeq ($(CONFIG_ROME_IF), usb)
CONFIG_PKTLOG_LEGACY := y
endif
ifeq ($(CONFIG_ROME_IF), snoc)
CONFIG_PKTLOG_LEGACY := y
endif
endif
ifeq ($(CONFIG_LITHIUM), y)
CONFIG_PKTLOG_LEGACY := n
endif
ifeq ($(CONFIG_LITHIUM), y)
CONFIG_WAPI_BIG_ENDIAN := y
else
CONFIG_WAPI_BIG_ENDIAN := n
endif
#Enable WDI Event support
ifeq ($(CONFIG_REMOVE_PKT_LOG), y)
CONFIG_WDI_EVENT_ENABLE := n
else
CONFIG_WDI_EVENT_ENABLE := y
endif
#Enable the type_specific_data in the ath_pktlog_arg
ifeq ($(CONFIG_REMOVE_PKT_LOG), n)
ifeq ($(CONFIG_LITHIUM), y)
CONFIG_PKTLOG_HAS_SPECIFIC_DATA := y
endif
ifeq ($(CONFIG_HELIUMPLUS), y)
CONFIG_PKTLOG_HAS_SPECIFIC_DATA := y
endif
endif
#Endianness selection
CONFIG_LITTLE_ENDIAN := y
#Enable TX reclaim support
CONFIG_TX_CREDIT_RECLAIM_SUPPORT := n
#Enable FTM support
CONFIG_QCA_WIFI_FTM := y
ifeq ($(CONFIG_QCA_WIFI_FTM), y)
ifeq ($(CONFIG_NL80211_TESTMODE), y)
QCA_WIFI_FTM_NL80211 :=y
else
QCA_WIFI_FTM_NL80211 :=n
endif
CONFIG_LINUX_QCMBR :=y
else
QCA_WIFI_FTM_NL80211 :=n
CONFIG_LINUX_QCMBR :=n
endif
#Enable Checksum Offload
CONFIG_CHECKSUM_OFFLOAD := y
#Enable GTK offload
CONFIG_GTK_OFFLOAD := y
#Set this to 1 to catch erroneous Target accesses during debug.
CONFIG_ATH_PCIE_ACCESS_DEBUG := n
#Enable IPA offload
ifeq ($(CONFIG_IPA), y)
CONFIG_IPA_OFFLOAD := y
endif
ifeq ($(CONFIG_IPA3), y)
CONFIG_IPA_OFFLOAD := y
endif
#Flag to enable SMMU S1 support
ifeq ($(CONFIG_ARCH_SDM845), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
ifeq ($(CONFIG_ARCH_SM8150), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
ifneq ($(CONFIG_LITHIUM), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
endif
ifeq ($(CONFIG_ARCH_SDXPRAIRIE), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
CONFIG_SMMU_S1_UNMAP := y
endif
endif
ifeq ($(CONFIG_ARCH_KONA), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
CONFIG_SMMU_S1_UNMAP := y
endif
endif
ifeq ($(CONFIG_ARCH_LAHAINA), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
CONFIG_SMMU_S1_UNMAP := y
endif
endif
ifeq ($(CONFIG_HELIUMPLUS), y)
ifneq ($(CONFIG_ARCH_SDM630), y)
ifneq ($(CONFIG_ARCH_SDM660), y)
ifneq ($(CONFIG_ARCH_MSM8998), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
endif
endif
endif
ifeq ($(CONFIG_ARCH_SDX20), y)
ifeq ($(CONFIG_QCA_WIFI_SDIO), y)
ifeq ($(CONFIG_WCNSS_SKB_PRE_ALLOC), y)
CONFIG_FEATURE_SKB_PRE_ALLOC := y
endif
endif
endif
#Enable Signed firmware support for split binary format
CONFIG_QCA_SIGNED_SPLIT_BINARY_SUPPORT := n
#Enable single firmware binary format
CONFIG_QCA_SINGLE_BINARY_SUPPORT := n
#Enable collecting target RAM dump after kernel panic
CONFIG_TARGET_RAMDUMP_AFTER_KERNEL_PANIC := y
#Flag to enable/disable secure firmware feature
CONFIG_FEATURE_SECURE_FIRMWARE := n
#Flag to enable Stats Ext implementation
CONFIG_FEATURE_STATS_EXT := y
#Flag to allocate memory dynamically for different buffers
CONFIG_WLAN_LOGGING_BUFFERS_DYNAMICALLY := n
CONFIG_WLAN_DFS_STATIC_MEM_ALLOC := y
#Flag to enable HTC credit history feature
CONFIG_FEATURE_HTC_CREDIT_HISTORY := y
#Flag to enable MTRACE feature
CONFIG_TRACE_RECORD_FEATURE := y
#Flag to enable p2p debug feature
CONFIG_WLAN_FEATURE_P2P_DEBUG := y
#Flag to enable roam debug log
CONFIG_FEATURE_ROAM_DEBUG := y
#Flag to enable DFS Master feature
CONFIG_WLAN_DFS_MASTER_ENABLE := y
#Flag to enable WEXT support for STA/AP/P2P interfaces
ifeq ($(CONFIG_WIRELESS_EXT), y)
CONFIG_WLAN_WEXT_SUPPORT_ENABLE := y
endif
#Flag to enable/disable MTRACE feature
CONFIG_ENABLE_MTRACE_LOG := y
#Flag to enable nud tracking feature
CONFIG_WLAN_NUD_TRACKING := y
#Flag to enable/Disable Function call trace
CONFIG_FUNC_CALL_MAP := n
#Flag to enable wbuff feature
CONFIG_WLAN_WBUFF := y
#Flag to enable set and get disable channel list feature
CONFIG_DISABLE_CHANNEL_LIST :=y
#Flag to enable beacon receive feature
CONFIG_WLAN_BCN_RECV_FEATURE := y
#Flag to enable LTE COEX feature
CONFIG_LTE_COEX := y
#Flag to enable/disable TARGET 11d scan
CONFIG_TARGET_11D_SCAN := y
#Flag to enable/disable Avoid acs freq feature
CONFIG_SAP_AVOID_ACS_FREQ_LIST := y
#Flag to enable HOST OPCLASS feature
CONFIG_HOST_OPCLASS := y
#Flag to enable Dynamic Voltage WDCVS (Config Voltage Mode)
CONFIG_WLAN_DYNAMIC_CVM := y
#Flag to enable SAR Safety Feature
CONFIG_SAR_SAFETY_FEATURE := y
CONFIG_WIFI_POS_CONVERGED := y
ifneq ($(CONFIG_WIFI_POS_CONVERGED), y)
CONFIG_WIFI_POS_LEGACY := y
endif
CONFIG_CP_STATS := y
CONFIG_FEATURE_INTEROP_ISSUES_AP := y
CONFIG_FEATURE_WLAN_WAPI := y
CONFIG_AGEIE_ON_SCAN_RESULTS := y
#Flag to enable FW log parsing support feature
CONFIG_FEATURE_FW_LOG_PARSING := y
CONFIG_PTT_SOCK_SVC_ENABLE := y
CONFIG_SOFTAP_CHANNEL_RANGE := y
CONFIG_FEATURE_WLAN_SCAN_PNO := y
CONFIG_WLAN_FEATURE_PACKET_FILTERING := y
CONFIG_WLAN_NS_OFFLOAD := y
CONFIG_FEATURE_WLAN_RA_FILTERING:= y
CONFIG_FEATURE_WLAN_LPHB := y
CONFIG_QCA_SUPPORT_TX_THROTTLE := y
CONFIG_WMI_INTERFACE_EVENT_LOGGING := y
CONFIG_WLAN_FEATURE_LINK_LAYER_STATS := y
CONFIG_FEATURE_CLUB_LL_STATS_AND_GET_STATION := y
CONFIG_FEATURE_WLAN_EXTSCAN := n
CONFIG_WMI_BCN_OFFLOAD := y
CONFIG_160MHZ_SUPPORT := y
CONFIG_MCL := y
CONFIG_REG_CLIENT := y
CONFIG_WLAN_PMO_ENABLE := y
CONFIG_CONVERGED_P2P_ENABLE := y
CONFIG_WLAN_POLICY_MGR_ENABLE := y
CONFIG_FEATURE_BLACKLIST_MGR := y
CONFIG_FOURTH_CONNECTION := y
CONFIG_SUPPORT_11AX := y
CONFIG_HDD_INIT_WITH_RTNL_LOCK := y
CONFIG_WLAN_CONV_SPECTRAL_ENABLE := y
CONFIG_WLAN_SPECTRAL_ENABLE := y
CONFIG_WMI_CMD_STRINGS := y
CONFIG_FEATURE_MONITOR_MODE_SUPPORT := y
CONFIG_WLAN_ALLOCATE_GLOBAL_BUFFERS_DYNAMICALLY := n
CONFIG_WLAN_FEATURE_TWT := y
CONFIG_FW_THERMAL_THROTTLE := y
ifeq (y,$(findstring y,$(CONFIG_LITHIUM) $(CONFIG_ICNSS) $(CONFIG_ICNSS_MODULE) $(CONFIG_ICNSS2_HELIUM)))
CONFIG_WLAN_FEATURE_BMI := n
else
CONFIG_WLAN_FEATURE_BMI := y
endif
#Flags to enable/disable vendor commands
CONFIG_FEATURE_RSSI_MONITOR := y
CONFIG_FEATURE_BSS_TRANSITION := y
CONFIG_FEATURE_STATION_INFO := y
CONFIG_FEATURE_TX_POWER := y
CONFIG_FEATURE_OTA_TEST := y
CONFIG_FEATURE_ACTIVE_TOS := y
CONFIG_FEATURE_SAR_LIMITS := y
CONFIG_FEATURE_CONCURRENCY_MATRIX := y
CONFIG_FEATURE_SAP_COND_CHAN_SWITCH := y
CONFIG_FEATURE_P2P_LISTEN_OFFLOAD := y
CONFIG_QCACLD_FEATURE_MPTA_HELPER := n
CONFIG_QCACLD_RX_DESC_MULTI_PAGE_ALLOC := y
#Flags to enable/disable WMI APIs
CONFIG_WMI_ROAM_SUPPORT := y
CONFIG_WMI_CONCURRENCY_SUPPORT := y
CONFIG_WMI_STA_SUPPORT := y
CONFIG_DP_TRACE := y
ifeq ($(CONFIG_HELIUMPLUS), y)
ifneq ($(CONFIG_FORCE_ALLOC_FROM_DMA_ZONE), y)
CONFIG_ENABLE_DEBUG_ADDRESS_MARKING := y
endif
CONFIG_RX_OL := y
endif
ifeq (y,$(filter y,$(CONFIG_CNSS2_DEBUG) $(CONFIG_SLUB_DEBUG_ON)))
CONFIG_DSC_DEBUG := y
CONFIG_DESC_TIMESTAMP_DEBUG_INFO := y
CONFIG_FEATURE_UNIT_TEST_SUSPEND := y
CONFIG_LEAK_DETECTION := y
CONFIG_MAX_LOGS_PER_SEC := 500
CONFIG_SCHED_HISTORY_SIZE := 256
CONFIG_TALLOC_DEBUG := y
CONFIG_UNIT_TEST := y
CONFIG_REGISTER_OP_DEBUG := y
CONFIG_ENABLE_QDF_PTR_HASH_DEBUG := y
CONFIG_HIF_DEBUG := y
CONFIG_HAL_DEBUG := y
endif
ifeq ($(CONFIG_UNIT_TEST), y)
CONFIG_DSC_TEST := y
CONFIG_QDF_TEST := y
CONFIG_FEATURE_WLM_STATS := y
endif
ifeq ($(CONFIG_LITHIUM), y)
ifeq (y,$(filter y,$(CONFIG_CNSS2_DEBUG) $(CONFIG_SLUB_DEBUG_ON)))
CONFIG_WLAN_FEATURE_DP_EVENT_HISTORY := y
CONFIG_HIF_CE_DEBUG_DATA_BUF := y
CONFIG_WLAN_RECORD_RX_PADDR := y
CONFIG_HIF_CPU_PERF_AFFINE_MASK := y
CONFIG_WLAN_FEATURE_DP_RX_RING_HISTORY := y
CONFIG_ALLOW_PKT_DROPPING := y
endif
CONFIG_DYNAMIC_RX_AGGREGATION := y
CONFIG_RX_DESC_DEBUG_CHECK:= y
CONFIG_WLAN_SUPPORT_DATA_STALL := y
CONFIG_WLAN_DP_PER_RING_TYPE_CONFIG := y
CONFIG_WLAN_CE_INTERRUPT_THRESHOLD_CONFIG := y
#Enable WMI TX/RX over QMI
CONFIG_WMI_SEND_RECV_QMI := y
CONFIG_WLAN_DP_PENDING_MEM_FLUSH := y
endif
ifeq (y,$(filter y,$(CONFIG_CNSS2_DEBUG) $(CONFIG_SLUB_DEBUG_ON)))
ifeq ($(CONFIG_CNSS_QCA6750), y)
CONFIG_FEATURE_PKTLOG := y
endif
endif
#Flag to enable hdd memory dump feature
CONFIG_FEATURE_MEMDUMP_ENABLE := y
#Flag to enable/disable WLAN D0-WOW
ifeq ($(CONFIG_PCI_MSM), y)
ifeq ($(CONFIG_HIF_PCI), y)
CONFIG_FEATURE_WLAN_D0WOW := y
endif
endif
ifeq ($(CONFIG_ARCH_MDM9607), y)
CONFIG_TUFELLO_DUAL_FW_SUPPORT := y
endif
ifeq ($(CONFIG_ARCH_MSM8996), y)
CONFIG_CHANNEL_HOPPING_ALL_BANDS := y
endif
ifeq ($(CONFIG_ARCH_SDXPRAIRIE), y)
ifneq ($(CONFIG_SLUB_DEBUG), y)
CONFIG_DP_TRACE := n
endif
CONFIG_DIRECT_BUF_RX_ENABLE := n
CONFIG_WMI_DBR_SUPPORT := n
CONFIG_MAX_CLIENTS_ALLOWED := 64
endif
ifneq ($(CONFIG_HIF_USB), y)
CONFIG_WLAN_LOGGING_SOCK_SVC := y
endif
ifneq ($(TARGET_BUILD_VARIANT),user)
CONFIG_DESC_DUP_DETECT_DEBUG := y
endif
ifeq (y,$(findstring y,$(CONFIG_CNSS) $(CONFIG_CNSS_MODULE)))
ifeq ($(CONFIG_CNSS_SDIO), y)
CONFIG_PLD_SDIO_CNSS_FLAG := y
endif
ifeq ($(CONFIG_HIF_PCI), y)
CONFIG_PLD_PCIE_CNSS_FLAG := y
endif
endif
ifeq (y,$(findstring y,$(CONFIG_CNSS2) $(CONFIG_CNSS2_MODULE)))
ifeq ($(CONFIG_HIF_PCI), y)
CONFIG_PLD_PCIE_CNSS_FLAG := y
CONFIG_PLD_PCIE_INIT_FLAG := y
endif
endif
#Enable STATE MACHINE HISTORY
CONFIG_SM_ENG_HIST := n
#Enable OEM DATA feature
CONFIG_FEATURE_OEM_DATA := y
#Enable FW Offload
CONFIG_WLAN_FW_OFFLOAD := y
#Enable eLNA bypass feature
ifeq ($(CONFIG_WLAN_FW_OFFLOAD), y)
CONFIG_WLAN_FEATURE_ELNA := y
endif
#Enable DP Bus Vote
CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH := y
ifeq ($(CONFIG_CNSS_QCA6750), y)
#Enable 6 GHz Band
CONFIG_BAND_6GHZ := y
CONFIG_RX_FISA := y
CONFIG_MORE_TX_DESC := y
endif
ifeq ($(CONFIG_CNSS_QCA6490), y)
#Enable 6 GHz Band
CONFIG_BAND_6GHZ := y
CONFIG_RX_FISA := y
CONFIG_MORE_TX_DESC := y
endif
CONFIG_HANDLE_BC_EAP_TX_FRM := y
ifeq ($(CONFIG_BAND_6GHZ), y)
CONFIG_6G_SCAN_CHAN_SORT_ALGO := y
endif
CONFIG_SAP_DHCP_FW_IND := y
#Enable support to get ANI level
CONFIG_ANI_LEVEL_REQUEST := y
ifeq ($(CONFIG_ARCH_QCS405), y)
CONFIG_FEATURE_WLAN_TIME_SYNC_FTM := y
endif
ifeq ($(CONFIG_ARCH_SDM660), y)
CONFIG_WLAN_FEATURE_PKT_CAPTURE := y
endif
#Enable RX RING buffers debug
CONFIG_DEBUG_RX_RING_BUFFER := y
#Enable Hash debug
CONFIG_RX_HASH_DEBUG := y
#Enable connection manager
CONFIG_CM_ENABLE := n
#Enable VDEV OPS wakelock feature
CONFIG_FEATURE_VDEV_OPS_WAKELOCK := y
# Enable RX buffer pool support
ifeq ($(CONFIG_CNSS_QCA6750), y)
CONFIG_WLAN_FEATURE_RX_BUFFER_POOL := y
CONFIG_DP_RX_BUFFER_POOL_SIZE := 128
CONFIG_DP_RX_BUFFER_POOL_ALLOC_THRES := 5
CONFIG_DP_SWLM := y
endif
#Enable Hang Event
CONFIG_WLAN_HANG_EVENT := y
ifeq ($(CONFIG_CNSS_QCA6750), y)
ifeq ($(CONFIG_FW_THERMAL_THROTTLE), y)
CONFIG_WLAN_THERMAL_MULTI_CLIENT_SUPPORT := y
endif
endif
Verwijs in nieuw issue Bekijk Git Blame Permalink kopiëren