android_kernel_samsung_sm8650-modules/hw/qca9574/rx_mpdu_start.h

/*
 * Copyright (c) 2021 The Linux Foundation. All rights reserved.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

// $ATH_LICENSE_HW_HDR_C$
//
// DO NOT EDIT!  This file is automatically generated
//               These definitions are tied to a particular hardware layout


#ifndef _RX_MPDU_START_H_
#define _RX_MPDU_START_H_
#if !defined(__ASSEMBLER__)
#endif

#include "rx_mpdu_info.h"

// ################ START SUMMARY #################
//
//	Dword	Fields
//	0-22	struct rx_mpdu_info rx_mpdu_info_details;
//	23	raw_mpdu[0], reserved_23[31:1]
//
// ################ END SUMMARY #################

#define NUM_OF_DWORDS_RX_MPDU_START 24

struct rx_mpdu_start {
    struct            rx_mpdu_info                       rx_mpdu_info_details;
             uint32_t raw_mpdu                        :  1, //[0]
                      reserved_23                     : 31; //[31:1]
};

/*

struct rx_mpdu_info rx_mpdu_info_details
			
			Structure containing all the MPDU header details that
			might be needed for other modules further down the received
			path

raw_mpdu
			
			Set by OLE when it has not performed any .11 to .3
			header conversion on this MPDU.
			
			<legal all>

reserved_23
			
			<legal 0>
*/


 /* EXTERNAL REFERENCE : struct rx_mpdu_info rx_mpdu_info_details */ 


/* Description		RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_RXPCU_MPDU_FILTER_IN_CATEGORY
			
			Field indicates what the reason was that this MPDU frame
			was allowed to come into the receive path by RXPCU
			
			<enum 0 rxpcu_filter_pass> This MPDU passed the normal
			frame filter programming of rxpcu
			
			<enum 1 rxpcu_monitor_client> This MPDU did NOT pass the
			regular frame filter and would have been dropped, were it
			not for the frame fitting into the 'monitor_client'
			category.
			
			<enum 2 rxpcu_monitor_other> This MPDU did NOT pass the
			regular frame filter and also did not pass the
			rxpcu_monitor_client filter. It would have been dropped
			accept that it did pass the 'monitor_other' category.
			
			
			
			Note: for ndp frame, if it was expected because the
			preceding NDPA was filter_pass, the setting 
			rxpcu_filter_pass will be used. This setting will also be
			used for every ndp frame in case Promiscuous mode is
			enabled.
			
			
			
			In case promiscuous is not enabled, and an NDP is not
			preceded by a NPDA filter pass frame, the only other setting
			that could appear here for the NDP is rxpcu_monitor_other. 
			
			(rxpcu has a configuration bit specifically for this
			scenario)
			
			
			
			Note: for 
			
			<legal 0-2>
*/
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_RXPCU_MPDU_FILTER_IN_CATEGORY_OFFSET 0x00000000
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_RXPCU_MPDU_FILTER_IN_CATEGORY_LSB 0
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_RXPCU_MPDU_FILTER_IN_CATEGORY_MASK 0x00000003

/* Description		RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_SW_FRAME_GROUP_ID
			
			SW processes frames based on certain classifications.
			This field indicates to what sw classification this MPDU is
			mapped.
			
			The classification is given in priority order
			
			
			
			<enum 0 sw_frame_group_NDP_frame> Note: The
			corresponding Rxpcu_Mpdu_filter_in_category can be
			rxpcu_filter_pass or rxpcu_monitor_other
			
			
			
			<enum 1 sw_frame_group_Multicast_data> 
			
			<enum 2 sw_frame_group_Unicast_data> 
			
			<enum 3 sw_frame_group_Null_data > This includes mpdus
			of type Data Null as well as QoS Data Null
			
			
			
			<enum 4 sw_frame_group_mgmt_0000 > 
			
			<enum 5 sw_frame_group_mgmt_0001 > 
			
			<enum 6 sw_frame_group_mgmt_0010 > 
			
			<enum 7 sw_frame_group_mgmt_0011 > 
			
			<enum 8 sw_frame_group_mgmt_0100 > 
			
			<enum 9 sw_frame_group_mgmt_0101 > 
			
			<enum 10 sw_frame_group_mgmt_0110 > 
			
			<enum 11 sw_frame_group_mgmt_0111 > 
			
			<enum 12 sw_frame_group_mgmt_1000 > 
			
			<enum 13 sw_frame_group_mgmt_1001 > 
			
			<enum 14 sw_frame_group_mgmt_1010 > 
			
			<enum 15 sw_frame_group_mgmt_1011 > 
			
			<enum 16 sw_frame_group_mgmt_1100 > 
			
			<enum 17 sw_frame_group_mgmt_1101 > 
			
			<enum 18 sw_frame_group_mgmt_1110 > 
			
			<enum 19 sw_frame_group_mgmt_1111 > 
			
			
			
			<enum 20 sw_frame_group_ctrl_0000 > 
			
			<enum 21 sw_frame_group_ctrl_0001 > 
			
			<enum 22 sw_frame_group_ctrl_0010 > 
			
			<enum 23 sw_frame_group_ctrl_0011 > 
			
			<enum 24 sw_frame_group_ctrl_0100 > 
			
			<enum 25 sw_frame_group_ctrl_0101 > 
			
			<enum 26 sw_frame_group_ctrl_0110 > 
			
			<enum 27 sw_frame_group_ctrl_0111 > 
			
			<enum 28 sw_frame_group_ctrl_1000 > 
			
			<enum 29 sw_frame_group_ctrl_1001 > 
			
			<enum 30 sw_frame_group_ctrl_1010 > 
			
			<enum 31 sw_frame_group_ctrl_1011 > 
			
			<enum 32 sw_frame_group_ctrl_1100 > 
			
			<enum 33 sw_frame_group_ctrl_1101 > 
			
			<enum 34 sw_frame_group_ctrl_1110 > 
			
			<enum 35 sw_frame_group_ctrl_1111 > 
			
			
			
			<enum 36 sw_frame_group_unsupported> This covers type 3
			and protocol version != 0 
			
			Note: The corresponding Rxpcu_Mpdu_filter_in_category
			can only be rxpcu_monitor_other
			
			
			
			
			Note: The corresponding Rxpcu_Mpdu_filter_in_category
			can be rxpcu_filter_pass
			
			
			
			<legal 0-37>
*/
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_SW_FRAME_GROUP_ID_OFFSET 0x00000000
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_SW_FRAME_GROUP_ID_LSB   2
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_SW_FRAME_GROUP_ID_MASK  0x000001fc

/* Description		RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_NDP_FRAME
			
			When set, the received frame was an NDP frame, and thus
			there will be no MPDU data.
			
			<legal all>
*/
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_NDP_FRAME_OFFSET        0x00000000
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_NDP_FRAME_LSB           9
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_NDP_FRAME_MASK          0x00000200

/* Description		RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PHY_ERR
			
			When set, a PHY error was received before MAC received
			any data, and thus there will be no MPDU data.
			
			<legal all>
*/
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PHY_ERR_OFFSET          0x00000000
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PHY_ERR_LSB             10
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PHY_ERR_MASK            0x00000400

/* Description		RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PHY_ERR_DURING_MPDU_HEADER
			
			When set, a PHY error was received before MAC received
			the complete MPDU header which was needed for proper
			decoding
			
			<legal all>
*/
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PHY_ERR_DURING_MPDU_HEADER_OFFSET 0x00000000
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PHY_ERR_DURING_MPDU_HEADER_LSB 11
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PHY_ERR_DURING_MPDU_HEADER_MASK 0x00000800

/* Description		RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PROTOCOL_VERSION_ERR
			
			Set when RXPCU detected a version error in the Frame
			control field
			
			<legal all>
*/
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PROTOCOL_VERSION_ERR_OFFSET 0x00000000
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PROTOCOL_VERSION_ERR_LSB 12
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PROTOCOL_VERSION_ERR_MASK 0x00001000

/* Description		RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_AST_BASED_LOOKUP_VALID
			
			When set, AST based lookup for this frame has found a
			valid result.
			
			
			
			Note that for NDP frame this will never be set
			
			<legal all>
*/
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_AST_BASED_LOOKUP_VALID_OFFSET 0x00000000
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_AST_BASED_LOOKUP_VALID_LSB 13
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_AST_BASED_LOOKUP_VALID_MASK 0x00002000

/* Description		RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_RESERVED_0A
			
			<legal 0>
*/
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_RESERVED_0A_OFFSET      0x00000000
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_RESERVED_0A_LSB         14
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_RESERVED_0A_MASK        0x0000c000

/* Description		RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PHY_PPDU_ID
			
			A ppdu counter value that PHY increments for every PPDU
			received. The counter value wraps around  
			
			<legal all>
*/
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PHY_PPDU_ID_OFFSET      0x00000000
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PHY_PPDU_ID_LSB         16
#define RX_MPDU_START_0_RX_MPDU_INFO_DETAILS_PHY_PPDU_ID_MASK        0xffff0000

/* Description		RX_MPDU_START_1_RX_MPDU_INFO_DETAILS_AST_INDEX
			
			This field indicates the index of the AST entry
			corresponding to this MPDU. It is provided by the GSE module
			instantiated in RXPCU.
			
			A value of 0xFFFF indicates an invalid AST index,
			meaning that No AST entry was found or NO AST search was
			performed
			
			
			
			In case of ndp or phy_err, this field will be set to
			0xFFFF
			
			<legal all>
*/
#define RX_MPDU_START_1_RX_MPDU_INFO_DETAILS_AST_INDEX_OFFSET        0x00000004
#define RX_MPDU_START_1_RX_MPDU_INFO_DETAILS_AST_INDEX_LSB           0
#define RX_MPDU_START_1_RX_MPDU_INFO_DETAILS_AST_INDEX_MASK          0x0000ffff

/* Description		RX_MPDU_START_1_RX_MPDU_INFO_DETAILS_SW_PEER_ID
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			This field indicates a unique peer identifier. It is set
			equal to field 'sw_peer_id' from the AST entry
			
			
			
			<legal all>
*/
#define RX_MPDU_START_1_RX_MPDU_INFO_DETAILS_SW_PEER_ID_OFFSET       0x00000004
#define RX_MPDU_START_1_RX_MPDU_INFO_DETAILS_SW_PEER_ID_LSB          16
#define RX_MPDU_START_1_RX_MPDU_INFO_DETAILS_SW_PEER_ID_MASK         0xffff0000

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_VALID
			
			When set, the field Mpdu_Frame_control_field has valid
			information
			
			
			
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_VALID_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_VALID_LSB 0
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_VALID_MASK 0x00000001

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_DURATION_VALID
			
			When set, the field Mpdu_duration_field has valid
			information
			
			
			
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_DURATION_VALID_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_DURATION_VALID_LSB 1
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_DURATION_VALID_MASK 0x00000002

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_VALID
			
			When set, the fields mac_addr_ad1_..... have valid
			information
			
			
			
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_VALID_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_VALID_LSB  2
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_VALID_MASK 0x00000004

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_VALID
			
			When set, the fields mac_addr_ad2_..... have valid
			information
			
			
			
			
			
			
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_VALID_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_VALID_LSB  3
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_VALID_MASK 0x00000008

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_VALID
			
			When set, the fields mac_addr_ad3_..... have valid
			information
			
			
			
			
			
			
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_VALID_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_VALID_LSB  4
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_VALID_MASK 0x00000010

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_VALID
			
			When set, the fields mac_addr_ad4_..... have valid
			information
			
			
			
			
			
			
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_VALID_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_VALID_LSB  5
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_VALID_MASK 0x00000020

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_VALID
			
			When set, the fields mpdu_sequence_control_field and
			mpdu_sequence_number have valid information as well as field
			
			
			
			For MPDUs without a sequence control field, this field
			will not be set.
			
			
			
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_VALID_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_VALID_LSB 6
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_VALID_MASK 0x00000040

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_VALID
			
			When set, the field mpdu_qos_control_field has valid
			information
			
			
			
			For MPDUs without a QoS control field, this field will
			not be set.
			
			
			
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_VALID_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_VALID_LSB 7
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_VALID_MASK 0x00000080

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_VALID
			
			When set, the field mpdu_HT_control_field has valid
			information
			
			
			
			For MPDUs without a HT control field, this field will
			not be set.
			
			
			
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_VALID_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_VALID_LSB 8
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_VALID_MASK 0x00000100

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_FRAME_ENCRYPTION_INFO_VALID
			
			When set, the encryption related info fields, like IV
			and PN are valid
			
			
			
			For MPDUs that are not encrypted, this will not be set.
			
			
			
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_FRAME_ENCRYPTION_INFO_VALID_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_FRAME_ENCRYPTION_INFO_VALID_LSB 9
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_FRAME_ENCRYPTION_INFO_VALID_MASK 0x00000200

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_FRAGMENT_NUMBER
			
			Field only valid when Mpdu_sequence_control_valid is set
			AND Fragment_flag is set 
			
			
			
			The fragment number from the 802.11 header.
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_FRAGMENT_NUMBER_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_FRAGMENT_NUMBER_LSB 10
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_FRAGMENT_NUMBER_MASK 0x00003c00

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MORE_FRAGMENT_FLAG
			
			The More Fragment bit setting from the MPDU header of
			the received frame
			
			
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MORE_FRAGMENT_FLAG_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MORE_FRAGMENT_FLAG_LSB  14
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MORE_FRAGMENT_FLAG_MASK 0x00004000

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_RESERVED_2A
			
			<legal 0>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_RESERVED_2A_OFFSET      0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_RESERVED_2A_LSB         15
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_RESERVED_2A_MASK        0x00008000

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_FR_DS
			
			Field only valid when Mpdu_frame_control_valid is set
			
			
			
			Set if the from DS bit is set in the frame control.
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_FR_DS_OFFSET            0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_FR_DS_LSB               16
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_FR_DS_MASK              0x00010000

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_TO_DS
			
			Field only valid when Mpdu_frame_control_valid is set 
			
			
			
			Set if the to DS bit is set in the frame control.
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_TO_DS_OFFSET            0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_TO_DS_LSB               17
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_TO_DS_MASK              0x00020000

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_ENCRYPTED
			
			Field only valid when Mpdu_frame_control_valid is set.
			
			
			
			Protected bit from the frame control.  
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_ENCRYPTED_OFFSET        0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_ENCRYPTED_LSB           18
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_ENCRYPTED_MASK          0x00040000

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_RETRY
			
			Field only valid when Mpdu_frame_control_valid is set.
			
			
			
			Retry bit from the frame control.  Only valid when
			first_msdu is set.
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_RETRY_OFFSET       0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_RETRY_LSB          19
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_RETRY_MASK         0x00080000

/* Description		RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_NUMBER
			
			Field only valid when Mpdu_sequence_control_valid is
			set.
			
			
			
			The sequence number from the 802.11 header.
			
			<legal all>
*/
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_NUMBER_OFFSET 0x00000008
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_NUMBER_LSB 20
#define RX_MPDU_START_2_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_NUMBER_MASK 0xfff00000

/* Description		RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_EPD_EN
			
			Field only valid when AST_based_lookup_valid == 1.
			
			
			
			
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			If set to one use EPD instead of LPD
			
			
			
			
			<legal all>
*/
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_EPD_EN_OFFSET           0x0000000c
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_EPD_EN_LSB              0
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_EPD_EN_MASK             0x00000001

/* Description		RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_ALL_FRAMES_SHALL_BE_ENCRYPTED
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			When set, all frames (data only ?) shall be encrypted.
			If not, RX CRYPTO shall set an error flag.
			
			<legal all>
*/
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_ALL_FRAMES_SHALL_BE_ENCRYPTED_OFFSET 0x0000000c
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_ALL_FRAMES_SHALL_BE_ENCRYPTED_LSB 1
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_ALL_FRAMES_SHALL_BE_ENCRYPTED_MASK 0x00000002

/* Description		RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_ENCRYPT_TYPE
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			Indicates type of decrypt cipher used (as defined in the
			peer entry)
			
			
			
			<enum 0 wep_40> WEP 40-bit
			
			<enum 1 wep_104> WEP 104-bit
			
			<enum 2 tkip_no_mic> TKIP without MIC
			
			<enum 3 wep_128> WEP 128-bit
			
			<enum 4 tkip_with_mic> TKIP with MIC
			
			<enum 5 wapi> WAPI
			
			<enum 6 aes_ccmp_128> AES CCMP 128
			
			<enum 7 no_cipher> No crypto
			
			<enum 8 aes_ccmp_256> AES CCMP 256
			
			<enum 9 aes_gcmp_128> AES CCMP 128
			
			<enum 10 aes_gcmp_256> AES CCMP 256
			
			<enum 11 wapi_gcm_sm4> WAPI GCM SM4
			
			
			
			<enum 12 wep_varied_width> WEP encryption. As for WEP
			per keyid the key bit width can vary, the key bit width for
			this MPDU will be indicated in field
			wep_key_width_for_variable key
			
			<legal 0-12>
*/
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_ENCRYPT_TYPE_OFFSET     0x0000000c
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_ENCRYPT_TYPE_LSB        2
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_ENCRYPT_TYPE_MASK       0x0000003c

/* Description		RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_WEP_KEY_WIDTH_FOR_VARIABLE_KEY
			
			Field only valid when key_type is set to
			wep_varied_width. 
			
			
			
			This field indicates the size of the wep key for this
			MPDU.
			
			 
			
			<enum 0 wep_varied_width_40> WEP 40-bit
			
			<enum 1 wep_varied_width_104> WEP 104-bit
			
			<enum 2 wep_varied_width_128> WEP 128-bit
			
			
			
			<legal 0-2>
*/
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_OFFSET 0x0000000c
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_LSB 6
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_MASK 0x000000c0

/* Description		RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_MESH_STA
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			When set, this is a Mesh (11s) STA
			
			<legal all>
*/
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_MESH_STA_OFFSET         0x0000000c
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_MESH_STA_LSB            8
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_MESH_STA_MASK           0x00000100

/* Description		RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_BSSID_HIT
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			When set, the BSSID of the incoming frame matched one of
			the 8 BSSID register values
			
			
			
			<legal all>
*/
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_BSSID_HIT_OFFSET        0x0000000c
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_BSSID_HIT_LSB           9
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_BSSID_HIT_MASK          0x00000200

/* Description		RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_BSSID_NUMBER
			
			Field only valid when bssid_hit is set.
			
			
			
			This number indicates which one out of the 8 BSSID
			register values matched the incoming frame
			
			<legal all>
*/
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_BSSID_NUMBER_OFFSET     0x0000000c
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_BSSID_NUMBER_LSB        10
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_BSSID_NUMBER_MASK       0x00003c00

/* Description		RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_TID
			
			Field only valid when mpdu_qos_control_valid is set
			
			
			
			The TID field in the QoS control field
			
			<legal all>
*/
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_TID_OFFSET              0x0000000c
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_TID_LSB                 14
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_TID_MASK                0x0003c000

/* Description		RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_RESERVED_3A
			
			<legal 0>
*/
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_RESERVED_3A_OFFSET      0x0000000c
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_RESERVED_3A_LSB         18
#define RX_MPDU_START_3_RX_MPDU_INFO_DETAILS_RESERVED_3A_MASK        0xfffc0000

/* Description		RX_MPDU_START_4_RX_MPDU_INFO_DETAILS_PN_31_0
			
			
			
			
			
			WEP: IV = {key_id_octet, pn2, pn1, pn0}.  Only pn[23:0]
			is valid.
			
			TKIP: IV = {pn5, pn4, pn3, pn2, key_id_octet, pn0,
			WEPSeed[1], pn1}.  Only pn[47:0] is valid.
			
			AES-CCM: IV = {pn5, pn4, pn3, pn2, key_id_octet, 0x0,
			pn1, pn0}.  Only pn[47:0] is valid.
			
			WAPI: IV = {key_id_octet, 0x0, pn15, pn14, pn13, pn12,
			pn11, pn10, pn9, pn8, pn7, pn6, pn5, pn4, pn3, pn2, pn1,
			pn0}.  pn[127:0] are valid.
			
			
			
*/
#define RX_MPDU_START_4_RX_MPDU_INFO_DETAILS_PN_31_0_OFFSET          0x00000010
#define RX_MPDU_START_4_RX_MPDU_INFO_DETAILS_PN_31_0_LSB             0
#define RX_MPDU_START_4_RX_MPDU_INFO_DETAILS_PN_31_0_MASK            0xffffffff

/* Description		RX_MPDU_START_5_RX_MPDU_INFO_DETAILS_PN_63_32
			
			
			
			
			Bits [63:32] of the PN number.   See description for
			pn_31_0.
			
			
			
*/
#define RX_MPDU_START_5_RX_MPDU_INFO_DETAILS_PN_63_32_OFFSET         0x00000014
#define RX_MPDU_START_5_RX_MPDU_INFO_DETAILS_PN_63_32_LSB            0
#define RX_MPDU_START_5_RX_MPDU_INFO_DETAILS_PN_63_32_MASK           0xffffffff

/* Description		RX_MPDU_START_6_RX_MPDU_INFO_DETAILS_PN_95_64
			
			
			
			
			Bits [95:64] of the PN number.  See description for
			pn_31_0.
			
			
			
*/
#define RX_MPDU_START_6_RX_MPDU_INFO_DETAILS_PN_95_64_OFFSET         0x00000018
#define RX_MPDU_START_6_RX_MPDU_INFO_DETAILS_PN_95_64_LSB            0
#define RX_MPDU_START_6_RX_MPDU_INFO_DETAILS_PN_95_64_MASK           0xffffffff

/* Description		RX_MPDU_START_7_RX_MPDU_INFO_DETAILS_PN_127_96
			
			
			
			
			Bits [127:96] of the PN number.  See description for
			pn_31_0.
			
			
			
*/
#define RX_MPDU_START_7_RX_MPDU_INFO_DETAILS_PN_127_96_OFFSET        0x0000001c
#define RX_MPDU_START_7_RX_MPDU_INFO_DETAILS_PN_127_96_LSB           0
#define RX_MPDU_START_7_RX_MPDU_INFO_DETAILS_PN_127_96_MASK          0xffffffff

/* Description		RX_MPDU_START_8_RX_MPDU_INFO_DETAILS_PEER_META_DATA
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			Meta data that SW has programmed in the Peer table entry
			of the transmitting STA.
			
			<legal all>
*/
#define RX_MPDU_START_8_RX_MPDU_INFO_DETAILS_PEER_META_DATA_OFFSET   0x00000020
#define RX_MPDU_START_8_RX_MPDU_INFO_DETAILS_PEER_META_DATA_LSB      0
#define RX_MPDU_START_8_RX_MPDU_INFO_DETAILS_PEER_META_DATA_MASK     0xffffffff

 /* EXTERNAL REFERENCE : struct rxpt_classify_info rxpt_classify_info_details */ 


/* Description		RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_REO_DESTINATION_INDICATION
			
			The ID of the REO exit ring where the MSDU frame shall
			push after (MPDU level) reordering has finished.
			
			
			
			<enum 0 reo_destination_tcl> Reo will push the frame
			into the REO2TCL ring
			
			<enum 1 reo_destination_sw1> Reo will push the frame
			into the REO2SW1 ring
			
			<enum 2 reo_destination_sw2> Reo will push the frame
			into the REO2SW1 ring
			
			<enum 3 reo_destination_sw3> Reo will push the frame
			into the REO2SW1 ring
			
			<enum 4 reo_destination_sw4> Reo will push the frame
			into the REO2SW1 ring
			
			<enum 5 reo_destination_release> Reo will push the frame
			into the REO_release ring
			
			<enum 6 reo_destination_fw> Reo will push the frame into
			the REO2FW ring
			
			<enum 7 reo_destination_7> REO remaps this
			
			<enum 8 reo_destination_8> REO remaps this <enum 9
			reo_destination_9> REO remaps this <enum 10
			reo_destination_10> REO remaps this 
			
			<enum 11 reo_destination_11> REO remaps this 
			
			<enum 12 reo_destination_12> REO remaps this <enum 13
			reo_destination_13> REO remaps this 
			
			<enum 14 reo_destination_14> REO remaps this 
			
			<enum 15 reo_destination_15> REO remaps this 
			
			<enum 16 reo_destination_16> REO remaps this 
			
			<enum 17 reo_destination_17> REO remaps this 
			
			<enum 18 reo_destination_18> REO remaps this 
			
			<enum 19 reo_destination_19> REO remaps this 
			
			<enum 20 reo_destination_20> REO remaps this 
			
			<enum 21 reo_destination_21> REO remaps this 
			
			<enum 22 reo_destination_22> REO remaps this 
			
			<enum 23 reo_destination_23> REO remaps this 
			
			<enum 24 reo_destination_24> REO remaps this 
			
			<enum 25 reo_destination_25> REO remaps this 
			
			<enum 26 reo_destination_26> REO remaps this 
			
			<enum 27 reo_destination_27> REO remaps this 
			
			<enum 28 reo_destination_28> REO remaps this 
			
			<enum 29 reo_destination_29> REO remaps this 
			
			<enum 30 reo_destination_30> REO remaps this 
			
			<enum 31 reo_destination_31> REO remaps this 
			
			
			
			<legal all>
*/
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_REO_DESTINATION_INDICATION_OFFSET 0x00000024
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_REO_DESTINATION_INDICATION_LSB 0
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_REO_DESTINATION_INDICATION_MASK 0x0000001f

/* Description		RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0A
			
			<legal 0>
*/
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0A_OFFSET 0x00000024
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0A_LSB 5
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0A_MASK 0x00000060

/* Description		RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_USE_FLOW_ID_TOEPLITZ_CLFY
			
			Field is used to enable classification based on the
			chosen Toeplitz hash from Common Parser (without reference
			to each hash type).
			
			<legal all>
*/
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_USE_FLOW_ID_TOEPLITZ_CLFY_OFFSET 0x00000024
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_USE_FLOW_ID_TOEPLITZ_CLFY_LSB 7
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_USE_FLOW_ID_TOEPLITZ_CLFY_MASK 0x00000080

/* Description		RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_UCAST_DATA
			
			Filter pass ucast data frame routing selection.
			
			
			
			1'b0: source and destination rings are selected from the
			RxOLE register settings for the packet type
			
			
			
			1'b1: source ring and destination ring is selected from
			the rxdma0_source_ring_selection and
			rxdma0_destination_ring_selection fields in this STRUCT
			
			<legal all>
*/
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_UCAST_DATA_OFFSET 0x00000024
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_UCAST_DATA_LSB 8
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_UCAST_DATA_MASK 0x00000100

/* Description		RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_MCAST_DATA
			
			Filter pass multicase data frame routing selection.
			
			
			
			1'b0: source and destination rings are selected from the
			RxOLE register settings for the packet type
			
			
			
			1'b1: source ring and destination ring is selected from
			the rxdma0_source_ring_selection and
			rxdma0_destination_ring_selection fields in this STRUCT
			
			<legal all>
*/
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_MCAST_DATA_OFFSET 0x00000024
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_MCAST_DATA_LSB 9
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_MCAST_DATA_MASK 0x00000200

/* Description		RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_1000
			
			Filter pass control bar frame routing selection.
			
			
			
			1'b0: source and destination rings are selected from the
			RxOLE register settings for the packet type
			
			
			
			1'b1: source ring and destination ring is selected from
			the rxdma0_source_ring_selection and
			rxdma0_destination_ring_selection fields in this STRUCT
			
			<legal all>
*/
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_1000_OFFSET 0x00000024
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_1000_LSB 10
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_1000_MASK 0x00000400

/* Description		RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_SOURCE_RING_SELECTION
			
			Field only valid when for the received frame type the
			corresponding pkt_selection_fp_... bit is set
			
			
			
			<enum 0 wbm2rxdma_buf_source_ring> The data buffer for
			this frame shall be sourced by wbm2rxdma buffer source ring
			
			<enum 1 fw2rxdma_buf_source_ring> The data buffer for
			this frame shall be sourced by fw2rxdma buffer source ring
			
			<enum 2 sw2rxdma_buf_source_ring> The data buffer for
			this frame shall be sourced by sw2rxdma buffer source ring
			
			<enum 3 no_buffer_ring> The frame shall not be written
			to any data buffer
			
			<legal all>
*/
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_SOURCE_RING_SELECTION_OFFSET 0x00000024
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_SOURCE_RING_SELECTION_LSB 11
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_SOURCE_RING_SELECTION_MASK 0x00001800

/* Description		RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_DESTINATION_RING_SELECTION
			
			Field only valid when for the received frame type the
			corresponding pkt_selection_fp_... bit is set
			
			
			
			<enum 0  rxdma_release_ring >  RXDMA0 shall push the
			frame to the Release ring. Effectively this means the frame
			needs to be dropped.
			
			
			
			<enum 1  rxdma2fw_ring >  RXDMA0 shall push the frame to
			the FW ring 
			
			
			
			<enum 2  rxdma2sw_ring >  RXDMA0 shall push the frame to
			the SW ring 
			
			
			
			<enum 3  rxdma2reo_ring >  RXDMA0 shall push the frame
			to the REO entrance ring 
			
			<legal all>
*/
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_DESTINATION_RING_SELECTION_OFFSET 0x00000024
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_DESTINATION_RING_SELECTION_LSB 13
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_DESTINATION_RING_SELECTION_MASK 0x00006000

/* Description		RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0B
			
			<legal 0>
*/
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0B_OFFSET 0x00000024
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0B_LSB 15
#define RX_MPDU_START_9_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0B_MASK 0xffff8000

/* Description		RX_MPDU_START_10_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_31_0
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			Address (lower 32 bits) of the REO queue descriptor. 
			
			
			
			If no Peer entry lookup happened for this frame, the
			value wil be set to 0, and the frame shall never be pushed
			to REO entrance ring.
			
			<legal all>
*/
#define RX_MPDU_START_10_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_31_0_OFFSET 0x00000028
#define RX_MPDU_START_10_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_31_0_LSB 0
#define RX_MPDU_START_10_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_31_0_MASK 0xffffffff

/* Description		RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_39_32
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			Address (upper 8 bits) of the REO queue descriptor. 
			
			
			
			If no Peer entry lookup happened for this frame, the
			value wil be set to 0, and the frame shall never be pushed
			to REO entrance ring.
			
			<legal all>
*/
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_39_32_OFFSET 0x0000002c
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_39_32_LSB 0
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_39_32_MASK 0x000000ff

/* Description		RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_RECEIVE_QUEUE_NUMBER
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			Indicates the MPDU queue ID to which this MPDU link
			descriptor belongs
			
			Used for tracking and debugging
			
			<legal all>
*/
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_RECEIVE_QUEUE_NUMBER_OFFSET 0x0000002c
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_RECEIVE_QUEUE_NUMBER_LSB 8
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_RECEIVE_QUEUE_NUMBER_MASK 0x00ffff00

/* Description		RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_PRE_DELIM_ERR_WARNING
			
			Indicates that a delimiter FCS error was found in
			between the Previous MPDU and this MPDU.
			
			
			
			Note that this is just a warning, and does not mean that
			this MPDU is corrupted in any way. If it is, there will be
			other errors indicated such as FCS or decrypt errors
			
			
			
			In case of ndp or phy_err, this field will indicate at
			least one of delimiters located after the last MPDU in the
			previous PPDU has been corrupted.
*/
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_PRE_DELIM_ERR_WARNING_OFFSET 0x0000002c
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_PRE_DELIM_ERR_WARNING_LSB 24
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_PRE_DELIM_ERR_WARNING_MASK 0x01000000

/* Description		RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_FIRST_DELIM_ERR
			
			Indicates that the first delimiter had a FCS failure. 
			Only valid when first_mpdu and first_msdu are set.
			
			
			
*/
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_FIRST_DELIM_ERR_OFFSET 0x0000002c
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_FIRST_DELIM_ERR_LSB    25
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_FIRST_DELIM_ERR_MASK   0x02000000

/* Description		RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_RESERVED_11
			
			<legal 0>
*/
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_RESERVED_11_OFFSET     0x0000002c
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_RESERVED_11_LSB        26
#define RX_MPDU_START_11_RX_MPDU_INFO_DETAILS_RESERVED_11_MASK       0xfc000000

/* Description		RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_KEY_ID_OCTET
			
			
			
			
			The key ID octet from the IV.
			
			
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			<legal all>
*/
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_KEY_ID_OCTET_OFFSET    0x00000030
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_KEY_ID_OCTET_LSB       0
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_KEY_ID_OCTET_MASK      0x000000ff

/* Description		RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_NEW_PEER_ENTRY
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			Set if new RX_PEER_ENTRY TLV follows. If clear,
			RX_PEER_ENTRY doesn't follow so RX DECRYPTION module either
			uses old peer entry or not decrypt. 
			
			<legal all>
*/
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_NEW_PEER_ENTRY_OFFSET  0x00000030
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_NEW_PEER_ENTRY_LSB     8
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_NEW_PEER_ENTRY_MASK    0x00000100

/* Description		RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_DECRYPT_NEEDED
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			Set if decryption is needed. 
			
			
			
			Note:
			
			When RXPCU sets bit 'ast_index_not_found' and/or
			ast_index_timeout', RXPCU will also ensure that this bit is
			NOT set
			
			CRYPTO for that reason only needs to evaluate this bit
			and non of the other ones.
			
			<legal all>
*/
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_DECRYPT_NEEDED_OFFSET  0x00000030
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_DECRYPT_NEEDED_LSB     9
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_DECRYPT_NEEDED_MASK    0x00000200

/* Description		RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_DECAP_TYPE
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			Used by the OLE during decapsulation.
			
			
			
			Indicates the decapsulation that HW will perform:
			
			
			
			<enum 0 RAW> No encapsulation
			
			<enum 1 Native_WiFi>
			
			<enum 2 Ethernet> Ethernet 2 (DIX)  or 802.3 (uses
			SNAP/LLC)
			
			<enum 3 802_3> Indicate Ethernet
			
			
			
			<legal all>
*/
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_DECAP_TYPE_OFFSET      0x00000030
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_DECAP_TYPE_LSB         10
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_DECAP_TYPE_MASK        0x00000c00

/* Description		RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_C_TAG_PADDING
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			Insert 4 byte of all zeros as VLAN tag if the rx payload
			does not have VLAN. Used during decapsulation. 
			
			<legal all>
*/
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_C_TAG_PADDING_OFFSET 0x00000030
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_C_TAG_PADDING_LSB 12
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_C_TAG_PADDING_MASK 0x00001000

/* Description		RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_S_TAG_PADDING
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			Insert 4 byte of all zeros as double VLAN tag if the rx
			payload does not have VLAN. Used during 
			
			<legal all>
*/
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_S_TAG_PADDING_OFFSET 0x00000030
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_S_TAG_PADDING_LSB 13
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_S_TAG_PADDING_MASK 0x00002000

/* Description		RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_STRIP_VLAN_C_TAG_DECAP
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			Strip the VLAN during decapsulation.  Used by the OLE.
			
			<legal all>
*/
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_STRIP_VLAN_C_TAG_DECAP_OFFSET 0x00000030
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_STRIP_VLAN_C_TAG_DECAP_LSB 14
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_STRIP_VLAN_C_TAG_DECAP_MASK 0x00004000

/* Description		RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_STRIP_VLAN_S_TAG_DECAP
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			Strip the double VLAN during decapsulation.  Used by
			the OLE.
			
			<legal all>
*/
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_STRIP_VLAN_S_TAG_DECAP_OFFSET 0x00000030
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_STRIP_VLAN_S_TAG_DECAP_LSB 15
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_STRIP_VLAN_S_TAG_DECAP_MASK 0x00008000

/* Description		RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_PRE_DELIM_COUNT
			
			The number of delimiters before this MPDU.  
			
			
			
			Note that this number is cleared at PPDU start.
			
			
			
			If this MPDU is the first received MPDU in the PPDU and
			this MPDU gets filtered-in, this field will indicate the
			number of delimiters located after the last MPDU in the
			previous PPDU.
			
			
			
			If this MPDU is located after the first received MPDU in
			an PPDU, this field will indicate the number of delimiters
			located between the previous MPDU and this MPDU.
			
			
			
			In case of ndp or phy_err, this field will indicate the
			number of delimiters located after the last MPDU in the
			previous PPDU.
			
			<legal all>
*/
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_PRE_DELIM_COUNT_OFFSET 0x00000030
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_PRE_DELIM_COUNT_LSB    16
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_PRE_DELIM_COUNT_MASK   0x0fff0000

/* Description		RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_AMPDU_FLAG
			
			When set, received frame was part of an A-MPDU.
			
			
			
			
			<legal all>
*/
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_AMPDU_FLAG_OFFSET      0x00000030
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_AMPDU_FLAG_LSB         28
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_AMPDU_FLAG_MASK        0x10000000

/* Description		RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_BAR_FRAME
			
			In case of ndp or phy_err or AST_based_lookup_valid ==
			0, this field will be set to 0
			
			
			
			When set, received frame is a BAR frame
			
			<legal all>
*/
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_BAR_FRAME_OFFSET       0x00000030
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_BAR_FRAME_LSB          29
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_BAR_FRAME_MASK         0x20000000

/* Description		RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_RESERVED_12
			
			<legal 0>.
*/
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_RESERVED_12_OFFSET     0x00000030
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_RESERVED_12_LSB        30
#define RX_MPDU_START_12_RX_MPDU_INFO_DETAILS_RESERVED_12_MASK       0xc0000000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MPDU_LENGTH
			
			In case of ndp or phy_err this field will be set to 0
			
			
			
			MPDU length before decapsulation.
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MPDU_LENGTH_OFFSET     0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MPDU_LENGTH_LSB        0
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MPDU_LENGTH_MASK       0x00003fff

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_FIRST_MPDU
			
			See definition in RX attention descriptor
			
			
			
			In case of ndp or phy_err, this field will be set. Note
			however that there will not actually be any data contents in
			the MPDU.
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_FIRST_MPDU_OFFSET      0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_FIRST_MPDU_LSB         14
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_FIRST_MPDU_MASK        0x00004000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MCAST_BCAST
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MCAST_BCAST_OFFSET     0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MCAST_BCAST_LSB        15
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MCAST_BCAST_MASK       0x00008000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_AST_INDEX_NOT_FOUND
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_AST_INDEX_NOT_FOUND_OFFSET 0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_AST_INDEX_NOT_FOUND_LSB 16
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_AST_INDEX_NOT_FOUND_MASK 0x00010000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_AST_INDEX_TIMEOUT
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_AST_INDEX_TIMEOUT_OFFSET 0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_AST_INDEX_TIMEOUT_LSB  17
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_AST_INDEX_TIMEOUT_MASK 0x00020000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_POWER_MGMT
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_POWER_MGMT_OFFSET      0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_POWER_MGMT_LSB         18
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_POWER_MGMT_MASK        0x00040000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_NON_QOS
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 1
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_NON_QOS_OFFSET         0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_NON_QOS_LSB            19
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_NON_QOS_MASK           0x00080000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_NULL_DATA
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_NULL_DATA_OFFSET       0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_NULL_DATA_LSB          20
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_NULL_DATA_MASK         0x00100000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MGMT_TYPE
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MGMT_TYPE_OFFSET       0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MGMT_TYPE_LSB          21
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MGMT_TYPE_MASK         0x00200000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_CTRL_TYPE
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_CTRL_TYPE_OFFSET       0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_CTRL_TYPE_LSB          22
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_CTRL_TYPE_MASK         0x00400000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MORE_DATA
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MORE_DATA_OFFSET       0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MORE_DATA_LSB          23
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_MORE_DATA_MASK         0x00800000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_EOSP
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_EOSP_OFFSET            0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_EOSP_LSB               24
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_EOSP_MASK              0x01000000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_FRAGMENT_FLAG
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_FRAGMENT_FLAG_OFFSET   0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_FRAGMENT_FLAG_LSB      25
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_FRAGMENT_FLAG_MASK     0x02000000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_ORDER
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_ORDER_OFFSET           0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_ORDER_LSB              26
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_ORDER_MASK             0x04000000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_U_APSD_TRIGGER
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_U_APSD_TRIGGER_OFFSET  0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_U_APSD_TRIGGER_LSB     27
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_U_APSD_TRIGGER_MASK    0x08000000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_ENCRYPT_REQUIRED
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_ENCRYPT_REQUIRED_OFFSET 0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_ENCRYPT_REQUIRED_LSB   28
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_ENCRYPT_REQUIRED_MASK  0x10000000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_DIRECTED
			
			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0
			
			
			
			See definition in RX attention descriptor
			
			<legal all>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_DIRECTED_OFFSET        0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_DIRECTED_LSB           29
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_DIRECTED_MASK          0x20000000

/* Description		RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_RESERVED_13
			
			<legal 0>
*/
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_RESERVED_13_OFFSET     0x00000034
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_RESERVED_13_LSB        30
#define RX_MPDU_START_13_RX_MPDU_INFO_DETAILS_RESERVED_13_MASK       0xc0000000

/* Description		RX_MPDU_START_14_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_FIELD
			
			Field only valid when Mpdu_frame_control_valid is set
			
			
			
			The frame control field of this received MPDU.
			
			
			
			Field only valid when Ndp_frame and phy_err are NOT set
			
			
			
			Bytes 0 + 1 of the received MPDU
			
			<legal all>
*/
#define RX_MPDU_START_14_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_FIELD_OFFSET 0x00000038
#define RX_MPDU_START_14_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_FIELD_LSB 0
#define RX_MPDU_START_14_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_FIELD_MASK 0x0000ffff

/* Description		RX_MPDU_START_14_RX_MPDU_INFO_DETAILS_MPDU_DURATION_FIELD
			
			Field only valid when Mpdu_duration_valid is set
			
			
			
			The duration field of this received MPDU.
			
			<legal all>
*/
#define RX_MPDU_START_14_RX_MPDU_INFO_DETAILS_MPDU_DURATION_FIELD_OFFSET 0x00000038
#define RX_MPDU_START_14_RX_MPDU_INFO_DETAILS_MPDU_DURATION_FIELD_LSB 16
#define RX_MPDU_START_14_RX_MPDU_INFO_DETAILS_MPDU_DURATION_FIELD_MASK 0xffff0000

/* Description		RX_MPDU_START_15_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_31_0
			
			Field only valid when mac_addr_ad1_valid is set
			
			
			
			The Least Significant 4 bytes of the Received Frames MAC
			Address AD1
			
			<legal all>
*/
#define RX_MPDU_START_15_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_31_0_OFFSET 0x0000003c
#define RX_MPDU_START_15_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_31_0_LSB  0
#define RX_MPDU_START_15_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_31_0_MASK 0xffffffff

/* Description		RX_MPDU_START_16_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_47_32
			
			Field only valid when mac_addr_ad1_valid is set
			
			
			
			The 2 most significant bytes of the Received Frames MAC
			Address AD1
			
			<legal all>
*/
#define RX_MPDU_START_16_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_47_32_OFFSET 0x00000040
#define RX_MPDU_START_16_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_47_32_LSB 0
#define RX_MPDU_START_16_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_47_32_MASK 0x0000ffff

/* Description		RX_MPDU_START_16_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_15_0
			
			Field only valid when mac_addr_ad2_valid is set
			
			
			
			The Least Significant 2 bytes of the Received Frames MAC
			Address AD2
			
			<legal all>
*/
#define RX_MPDU_START_16_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_15_0_OFFSET 0x00000040
#define RX_MPDU_START_16_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_15_0_LSB  16
#define RX_MPDU_START_16_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_15_0_MASK 0xffff0000

/* Description		RX_MPDU_START_17_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_47_16
			
			Field only valid when mac_addr_ad2_valid is set
			
			
			
			The 4 most significant bytes of the Received Frames MAC
			Address AD2
			
			<legal all>
*/
#define RX_MPDU_START_17_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_47_16_OFFSET 0x00000044
#define RX_MPDU_START_17_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_47_16_LSB 0
#define RX_MPDU_START_17_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_47_16_MASK 0xffffffff

/* Description		RX_MPDU_START_18_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_31_0
			
			Field only valid when mac_addr_ad3_valid is set
			
			
			
			The Least Significant 4 bytes of the Received Frames MAC
			Address AD3
			
			<legal all>
*/
#define RX_MPDU_START_18_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_31_0_OFFSET 0x00000048
#define RX_MPDU_START_18_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_31_0_LSB  0
#define RX_MPDU_START_18_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_31_0_MASK 0xffffffff

/* Description		RX_MPDU_START_19_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_47_32
			
			Field only valid when mac_addr_ad3_valid is set
			
			
			
			The 2 most significant bytes of the Received Frames MAC
			Address AD3
			
			<legal all>
*/
#define RX_MPDU_START_19_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_47_32_OFFSET 0x0000004c
#define RX_MPDU_START_19_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_47_32_LSB 0
#define RX_MPDU_START_19_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_47_32_MASK 0x0000ffff

/* Description		RX_MPDU_START_19_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_FIELD
			
			
			
			
			The sequence control field of the MPDU
			
			<legal all>
*/
#define RX_MPDU_START_19_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_FIELD_OFFSET 0x0000004c
#define RX_MPDU_START_19_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_FIELD_LSB 16
#define RX_MPDU_START_19_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_FIELD_MASK 0xffff0000

/* Description		RX_MPDU_START_20_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_31_0
			
			Field only valid when mac_addr_ad4_valid is set
			
			
			
			The Least Significant 4 bytes of the Received Frames MAC
			Address AD4
			
			<legal all>
*/
#define RX_MPDU_START_20_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_31_0_OFFSET 0x00000050
#define RX_MPDU_START_20_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_31_0_LSB  0
#define RX_MPDU_START_20_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_31_0_MASK 0xffffffff

/* Description		RX_MPDU_START_21_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_47_32
			
			Field only valid when mac_addr_ad4_valid is set
			
			
			
			The 2 most significant bytes of the Received Frames MAC
			Address AD4
			
			<legal all>
*/
#define RX_MPDU_START_21_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_47_32_OFFSET 0x00000054
#define RX_MPDU_START_21_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_47_32_LSB 0
#define RX_MPDU_START_21_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_47_32_MASK 0x0000ffff

/* Description		RX_MPDU_START_21_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_FIELD
			
			Field only valid when mpdu_qos_control_valid is set
			
			
			
			The sequence control field of the MPDU
			
			<legal all>
*/
#define RX_MPDU_START_21_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_FIELD_OFFSET 0x00000054
#define RX_MPDU_START_21_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_FIELD_LSB 16
#define RX_MPDU_START_21_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_FIELD_MASK 0xffff0000

/* Description		RX_MPDU_START_22_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_FIELD
			
			Field only valid when mpdu_qos_control_valid is set
			
			
			
			The HT control field of the MPDU
			
			<legal all>
*/
#define RX_MPDU_START_22_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_FIELD_OFFSET 0x00000058
#define RX_MPDU_START_22_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_FIELD_LSB 0
#define RX_MPDU_START_22_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_FIELD_MASK 0xffffffff

/* Description		RX_MPDU_START_23_RAW_MPDU
			
			Set by OLE when it has not performed any .11 to .3
			header conversion on this MPDU.
			
			<legal all>
*/
#define RX_MPDU_START_23_RAW_MPDU_OFFSET                             0x0000005c
#define RX_MPDU_START_23_RAW_MPDU_LSB                                0
#define RX_MPDU_START_23_RAW_MPDU_MASK                               0x00000001

/* Description		RX_MPDU_START_23_RESERVED_23
			
			<legal 0>
*/
#define RX_MPDU_START_23_RESERVED_23_OFFSET                          0x0000005c
#define RX_MPDU_START_23_RESERVED_23_LSB                             1
#define RX_MPDU_START_23_RESERVED_23_MASK                            0xfffffffe


#endif // _RX_MPDU_START_H_