samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Garpu 0
Kode Masalah Tarik Permintaan Actions Packages Projects Rilis Wiki Kegiatan
Files
0d9d979c760c20e4c0ca0cb541b7290b6c6784c3
android_kernel_samsung_sm86…/msm/dsi/dsi_defs.h
Yahui Wang e280657f7f disp: msm: support 8bit and 10bit bpp switch 
Support 8bit and 10bit bpp switch for display.

Change-Id: Ia5fcb330df95618596377773d0598be2b5609de1
Signed-off-by: Yahui Wang <quic_yahuiw@quicinc.com>
2023-05-25 10:15:23 +08:00

848 baris
26 KiB
C
Mentah Salahkan Riwayat

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
* Copyright (c) 2016-2021, The Linux Foundation. All rights reserved.
*/
#ifndef _DSI_DEFS_H_
#define _DSI_DEFS_H_
#include <linux/types.h>
#include <drm/drm_mipi_dsi.h>
#include "msm_drv.h"
#define DSI_H_TOTAL(t) (((t)->h_active) + ((t)->h_back_porch) + \
((t)->h_sync_width) + ((t)->h_front_porch))
#define DSI_V_TOTAL(t) (((t)->v_active) + ((t)->v_back_porch) + \
((t)->v_sync_width) + ((t)->v_front_porch))
#define DSI_H_SCALE(h, s) (DIV_ROUND_UP((h) * (s)->numer, (s)->denom))
#define DSI_DEBUG_NAME_LEN 32
#define display_for_each_ctrl(index, display) \
for (index = 0; (index < (display)->ctrl_count) &&\
(index < MAX_DSI_CTRLS_PER_DISPLAY); index++)
#define DSI_WARN(fmt, ...) DRM_WARN("[msm-dsi-warn]: "fmt, ##__VA_ARGS__)
#define DSI_ERR(fmt, ...) DRM_DEV_ERROR(NULL, "[msm-dsi-error]: " fmt, \
##__VA_ARGS__)
#define DSI_INFO(fmt, ...) DRM_DEV_INFO(NULL, "[msm-dsi-info]: "fmt, \
##__VA_ARGS__)
#define DSI_DEBUG(fmt, ...) DRM_DEV_DEBUG(NULL, "[msm-dsi-debug]: "fmt, \
##__VA_ARGS__)
/**
* enum dsi_pixel_format - DSI pixel formats
* @DSI_PIXEL_FORMAT_RGB565:
* @DSI_PIXEL_FORMAT_RGB666:
* @DSI_PIXEL_FORMAT_RGB666_LOOSE:
* @DSI_PIXEL_FORMAT_RGB888:
* @DSI_PIXEL_FORMAT_RGB111:
* @DSI_PIXEL_FORMAT_RGB332:
* @DSI_PIXEL_FORMAT_RGB444:
* @DSI_PIXEL_FORMAT_RGB101010:
* @DSI_PIXEL_FORMAT_MAX:
*/
enum dsi_pixel_format {
DSI_PIXEL_FORMAT_RGB565 = 0,
DSI_PIXEL_FORMAT_RGB666,
DSI_PIXEL_FORMAT_RGB666_LOOSE,
DSI_PIXEL_FORMAT_RGB888,
DSI_PIXEL_FORMAT_RGB111,
DSI_PIXEL_FORMAT_RGB332,
DSI_PIXEL_FORMAT_RGB444,
DSI_PIXEL_FORMAT_RGB101010,
DSI_PIXEL_FORMAT_MAX
};
/**
* enum dsi_op_mode - dsi operation mode
* @DSI_OP_VIDEO_MODE: DSI video mode operation
* @DSI_OP_CMD_MODE: DSI Command mode operation
* @DSI_OP_MODE_MAX:
*/
enum dsi_op_mode {
DSI_OP_VIDEO_MODE = BIT(0),
DSI_OP_CMD_MODE = BIT(1),
DSI_OP_MODE_MAX = BIT(2),
};
/**
* enum dsi_mode_flags - flags to signal other drm components via private flags
* @DSI_MODE_FLAG_SEAMLESS: Seamless transition requested by user
* @DSI_MODE_FLAG_DFPS: Seamless transition is DynamicFPS
* @DSI_MODE_FLAG_VBLANK_PRE_MODESET: Transition needs VBLANK before Modeset
* @DSI_MODE_FLAG_DMS: Seamless transition is dynamic mode switch
* @DSI_MODE_FLAG_VRR: Seamless transition is DynamicFPS.
* New timing values are sent from DAL.
* @DSI_MODE_FLAG_DYN_CLK: Seamless transition is dynamic clock change
* @DSI_MODE_FLAG_DMS_FPS: Seamless fps only transition in Dynamic Mode Switch
* @DSI_MODE_FLAG_POMS_TO_VID:
* Seamless transition is dynamic panel operating mode switch to video
* @DSI_MODE_FLAG_POMS_TO_CMD:
* Seamless transition is dynamic panel operating mode switch to cmd
* @DSI_MODE_FLAG_NONDSC_BPP_SWITCH: Transition is bpp mode switch without DSC.
*/
enum dsi_mode_flags {
DSI_MODE_FLAG_SEAMLESS = BIT(0),
DSI_MODE_FLAG_DFPS = BIT(1),
DSI_MODE_FLAG_VBLANK_PRE_MODESET = BIT(2),
DSI_MODE_FLAG_DMS = BIT(3),
DSI_MODE_FLAG_VRR = BIT(4),
DSI_MODE_FLAG_DYN_CLK = BIT(5),
DSI_MODE_FLAG_DMS_FPS = BIT(6),
DSI_MODE_FLAG_POMS_TO_VID = BIT(7),
DSI_MODE_FLAG_POMS_TO_CMD = BIT(8),
DSI_MODE_FLAG_NONDSC_BPP_SWITCH = BIT(9)
};
/**
* enum dsi_logical_lane - dsi logical lanes
* @DSI_LOGICAL_LANE_0: Logical lane 0
* @DSI_LOGICAL_LANE_1: Logical lane 1
* @DSI_LOGICAL_LANE_2: Logical lane 2
* @DSI_LOGICAL_LANE_3: Logical lane 3
* @DSI_LOGICAL_CLOCK_LANE: Clock lane
* @DSI_LANE_MAX: Maximum lanes supported
*/
enum dsi_logical_lane {
DSI_LOGICAL_LANE_0 = 0,
DSI_LOGICAL_LANE_1,
DSI_LOGICAL_LANE_2,
DSI_LOGICAL_LANE_3,
DSI_LOGICAL_CLOCK_LANE,
DSI_LANE_MAX
};
/**
* enum dsi_data_lanes - BIT map for DSI data lanes
* This is used to identify the active DSI data lanes for
* various operations like DSI data lane enable/ULPS/clamp
* configurations.
* @DSI_DATA_LANE_0: BIT(DSI_LOGICAL_LANE_0)
* @DSI_DATA_LANE_1: BIT(DSI_LOGICAL_LANE_1)
* @DSI_DATA_LANE_2: BIT(DSI_LOGICAL_LANE_2)
* @DSI_DATA_LANE_3: BIT(DSI_LOGICAL_LANE_3)
* @DSI_CLOCK_LANE: BIT(DSI_LOGICAL_CLOCK_LANE)
*/
enum dsi_data_lanes {
DSI_DATA_LANE_0 = BIT(DSI_LOGICAL_LANE_0),
DSI_DATA_LANE_1 = BIT(DSI_LOGICAL_LANE_1),
DSI_DATA_LANE_2 = BIT(DSI_LOGICAL_LANE_2),
DSI_DATA_LANE_3 = BIT(DSI_LOGICAL_LANE_3),
DSI_CLOCK_LANE = BIT(DSI_LOGICAL_CLOCK_LANE)
};
/**
* enum dsi_phy_data_lanes - dsi physical lanes
* used for DSI logical to physical lane mapping
* @DSI_PHYSICAL_LANE_INVALID: Physical lane valid/invalid
* @DSI_PHYSICAL_LANE_0: Physical lane 0
* @DSI_PHYSICAL_LANE_1: Physical lane 1
* @DSI_PHYSICAL_LANE_2: Physical lane 2
* @DSI_PHYSICAL_LANE_3: Physical lane 3
*/
enum dsi_phy_data_lanes {
DSI_PHYSICAL_LANE_INVALID = 0,
DSI_PHYSICAL_LANE_0 = BIT(0),
DSI_PHYSICAL_LANE_1 = BIT(1),
DSI_PHYSICAL_LANE_2 = BIT(2),
DSI_PHYSICAL_LANE_3 = BIT(3)
};
enum dsi_lane_map_type_v1 {
DSI_LANE_MAP_0123,
DSI_LANE_MAP_3012,
DSI_LANE_MAP_2301,
DSI_LANE_MAP_1230,
DSI_LANE_MAP_0321,
DSI_LANE_MAP_1032,
DSI_LANE_MAP_2103,
DSI_LANE_MAP_3210,
};
/**
* lane_map: DSI logical <-> physical lane mapping
* lane_map_v1: Lane mapping for DSI controllers < v2.0
* lane_map_v2: Lane mapping for DSI controllers >= 2.0
*/
struct dsi_lane_map {
enum dsi_lane_map_type_v1 lane_map_v1;
u8 lane_map_v2[DSI_LANE_MAX - 1];
};
/**
* enum dsi_trigger_type - dsi trigger type
* @DSI_TRIGGER_NONE: No trigger.
* @DSI_TRIGGER_TE: TE trigger.
* @DSI_TRIGGER_SEOF: Start or End of frame.
* @DSI_TRIGGER_SW: Software trigger.
* @DSI_TRIGGER_SW_SEOF: Software trigger and start/end of frame.
* @DSI_TRIGGER_SW_TE: Software and TE triggers.
* @DSI_TRIGGER_MAX: Max trigger values.
*/
enum dsi_trigger_type {
DSI_TRIGGER_NONE = 0,
DSI_TRIGGER_TE,
DSI_TRIGGER_SEOF,
DSI_TRIGGER_SW,
DSI_TRIGGER_SW_SEOF,
DSI_TRIGGER_SW_TE,
DSI_TRIGGER_MAX
};
/**
* enum dsi_color_swap_mode - color swap mode
* @DSI_COLOR_SWAP_RGB:
* @DSI_COLOR_SWAP_RBG:
* @DSI_COLOR_SWAP_BGR:
* @DSI_COLOR_SWAP_BRG:
* @DSI_COLOR_SWAP_GRB:
* @DSI_COLOR_SWAP_GBR:
*/
enum dsi_color_swap_mode {
DSI_COLOR_SWAP_RGB = 0,
DSI_COLOR_SWAP_RBG,
DSI_COLOR_SWAP_BGR,
DSI_COLOR_SWAP_BRG,
DSI_COLOR_SWAP_GRB,
DSI_COLOR_SWAP_GBR
};
/**
* enum dsi_dfps_type - Dynamic FPS support type
* @DSI_DFPS_NONE: Dynamic FPS is not supported.
* @DSI_DFPS_SUSPEND_RESUME:
* @DSI_DFPS_IMMEDIATE_CLK:
* @DSI_DFPS_IMMEDIATE_HFP:
* @DSI_DFPS_IMMEDIATE_VFP:
* @DSI_DPFS_MAX:
*/
enum dsi_dfps_type {
DSI_DFPS_NONE = 0,
DSI_DFPS_SUSPEND_RESUME,
DSI_DFPS_IMMEDIATE_CLK,
DSI_DFPS_IMMEDIATE_HFP,
DSI_DFPS_IMMEDIATE_VFP,
DSI_DFPS_MAX
};
/**
* enum dsi_dyn_clk_feature_type - Dynamic clock feature support type
* @DSI_DYN_CLK_TYPE_LEGACY: Constant FPS is not supported
* @DSI_DYN_CLK_TYPE_CONST_FPS_ADJUST_HFP: Constant FPS supported with
* change in hfp
* @DSI_DYN_CLK_TYPE_CONST_FPS_ADJUST_VFP: Constant FPS supported with
* change in vfp
* @DSI_DYN_CLK_TYPE_MAX:
*/
enum dsi_dyn_clk_feature_type {
DSI_DYN_CLK_TYPE_LEGACY = 0,
DSI_DYN_CLK_TYPE_CONST_FPS_ADJUST_HFP,
DSI_DYN_CLK_TYPE_CONST_FPS_ADJUST_VFP,
DSI_DYN_CLK_TYPE_MAX
};
/**
* enum dsi_cmd_set_type - DSI command set type
* @DSI_CMD_SET_PRE_ON: Panel pre on
* @DSI_CMD_SET_ON: Panel on
* @DSI_CMD_SET_VID_ON: Video mode panel on
* @DSI_CMD_SET_CMD_ON: Command mode panel on
* @DSI_CMD_SET_POST_ON: Panel post on
* @DSI_CMD_SET_PRE_OFF: Panel pre off
* @DSI_CMD_SET_OFF: Panel off
* @DSI_CMD_SET_POST_OFF: Panel post off
* @DSI_CMD_SET_PRE_RES_SWITCH: Pre resolution switch
* @DSI_CMD_SET_RES_SWITCH: Resolution switch
* @DSI_CMD_SET_POST_RES_SWITCH: Post resolution switch
* @DSI_CMD_SET_VID_SWITCH_IN: Video mode switch in
* @DSI_CMD_SET_VID_SWITCH_OUT: Video mode switch out
* @DSI_CMD_SET_CMD_SWITCH_IN: Cmd mode switch in
* @DSI_CMD_SET_CMD_SWITCH_OUT: Cmd mode switch out
* @DSI_CMD_SET_PANEL_STATUS: Panel status
* @DSI_CMD_SET_LP1: Low power mode 1
* @DSI_CMD_SET_LP2: Low power mode 2
* @DSI_CMD_SET_NOLP: Low power mode disable
* @DSI_CMD_SET_PPS: DSC PPS command
* @DSI_CMD_SET_ROI: Panel ROI update
* @DSI_CMD_SET_TIMING_SWITCH: Timing switch
* @DSI_CMD_SET_POST_TIMING_SWITCH: Post timing switch
* @DSI_CMD_SET_QSYNC_ON Enable qsync mode
* @DSI_CMD_SET_QSYNC_OFF Disable qsync mode
* @DSI_CMD_SET_MAX
*/
enum dsi_cmd_set_type {
DSI_CMD_SET_PRE_ON = 0,
DSI_CMD_SET_ON,
DSI_CMD_SET_VID_ON,
DSI_CMD_SET_CMD_ON,
DSI_CMD_SET_POST_ON,
DSI_CMD_SET_PRE_OFF,
DSI_CMD_SET_OFF,
DSI_CMD_SET_POST_OFF,
DSI_CMD_SET_PRE_RES_SWITCH,
DSI_CMD_SET_RES_SWITCH,
DSI_CMD_SET_POST_RES_SWITCH,
DSI_CMD_SET_VID_SWITCH_IN,
DSI_CMD_SET_VID_SWITCH_OUT,
DSI_CMD_SET_CMD_SWITCH_IN,
DSI_CMD_SET_CMD_SWITCH_OUT,
DSI_CMD_SET_PANEL_STATUS,
DSI_CMD_SET_LP1,
DSI_CMD_SET_LP2,
DSI_CMD_SET_NOLP,
DSI_CMD_SET_PPS,
DSI_CMD_SET_ROI,
DSI_CMD_SET_TIMING_SWITCH,
DSI_CMD_SET_POST_TIMING_SWITCH,
DSI_CMD_SET_QSYNC_ON,
DSI_CMD_SET_QSYNC_OFF,
DSI_CMD_SET_MAX
};
/**
* enum dsi_cmd_set_state - command set state
* @DSI_CMD_SET_STATE_LP: dsi low power mode
* @DSI_CMD_SET_STATE_HS: dsi high speed mode
* @DSI_CMD_SET_STATE_MAX
*/
enum dsi_cmd_set_state {
DSI_CMD_SET_STATE_LP = 0,
DSI_CMD_SET_STATE_HS,
DSI_CMD_SET_STATE_MAX
};
/**
* enum dsi_clk_gate_type - Type of clock to be gated.
* @PIXEL_CLK: DSI pixel clock.
* @BYTE_CLK: DSI byte clock.
* @DSI_PHY: DSI PHY.
* @DSI_CLK_ALL: All available DSI clocks
* @DSI_CLK_NONE: None of the clocks should be gated
*/
enum dsi_clk_gate_type {
PIXEL_CLK = 1,
BYTE_CLK = 2,
DSI_PHY = 4,
DSI_CLK_ALL = (PIXEL_CLK | BYTE_CLK | DSI_PHY),
DSI_CLK_NONE = 8,
};
/**
* enum dsi_phy_type - DSI phy types
* @DSI_PHY_TYPE_DPHY:
* @DSI_PHY_TYPE_CPHY:
*/
enum dsi_phy_type {
DSI_PHY_TYPE_DPHY,
DSI_PHY_TYPE_CPHY
};
/**
* enum dsi_te_mode - dsi te source
* @DSI_TE_ON_DATA_LINK: TE read from DSI link
* @DSI_TE_ON_EXT_PIN: TE signal on an external GPIO
*/
enum dsi_te_mode {
DSI_TE_ON_DATA_LINK = 0,
DSI_TE_ON_EXT_PIN,
};
/**
* enum dsi_video_traffic_mode - video mode pixel transmission type
* @DSI_VIDEO_TRAFFIC_SYNC_PULSES: Non-burst mode with sync pulses.
* @DSI_VIDEO_TRAFFIC_SYNC_START_EVENTS: Non-burst mode with sync start events.
* @DSI_VIDEO_TRAFFIC_BURST_MODE: Burst mode using sync start events.
*/
enum dsi_video_traffic_mode {
DSI_VIDEO_TRAFFIC_SYNC_PULSES = 0,
DSI_VIDEO_TRAFFIC_SYNC_START_EVENTS,
DSI_VIDEO_TRAFFIC_BURST_MODE,
};
/**
* struct dsi_cmd_desc - description of a dsi command
* @msg: dsi mipi msg packet
* @last_command: indicates whether the cmd is the last one to send
* @post_wait_ms: post wait duration
* @ctrl: index of DSI controller
* @ctrl_flags: controller flags
* @ts: dsi command time stamp in nano-seconds.
*/
struct dsi_cmd_desc {
struct mipi_dsi_msg msg;
bool last_command;
u32 post_wait_ms;
u32 ctrl;
u32 ctrl_flags;
ktime_t ts;
};
/**
* struct dsi_panel_cmd_set - command set of the panel
* @type: type of the command
* @state: state of the command
* @count: number of cmds
* @ctrl_idx: index of the dsi control
* @cmds: arry of cmds
*/
struct dsi_panel_cmd_set {
enum dsi_cmd_set_type type;
enum dsi_cmd_set_state state;
u32 count;
u32 ctrl_idx;
struct dsi_cmd_desc *cmds;
};
/**
* struct dsi_mode_info - video mode information dsi frame
* @h_active: Active width of one frame in pixels.
* @h_back_porch: Horizontal back porch in pixels.
* @h_sync_width: HSYNC width in pixels.
* @h_front_porch: Horizontal fron porch in pixels.
* @h_skew:
* @h_sync_polarity: Polarity of HSYNC (false is active low).
* @v_active: Active height of one frame in lines.
* @v_back_porch: Vertical back porch in lines.
* @v_sync_width: VSYNC width in lines.
* @v_front_porch: Vertical front porch in lines.
* @v_sync_polarity: Polarity of VSYNC (false is active low).
* @refresh_rate: Refresh rate in Hz.
* @clk_rate_hz: DSI bit clock rate per lane in Hz.
* @min_dsi_clk_hz: Min DSI bit clock to transfer in vsync time.
* @mdp_transfer_time_us: Specifies the mdp transfer time for command mode
* panels in microseconds.
* @dsi_transfer_time_us: Specifies dsi transfer time for command mode.
* @dsc_enabled: DSC compression enabled.
* @vdc_enabled: VDC compression enabled.
* @dsc: DSC compression configuration.
* @vdc: VDC compression configuration.
* @pclk_scale: pclk scale factor, target bpp to source bpp
* @roi_caps: Panel ROI capabilities.
* @qsync_min_fps: Qsync min fps rate
* @avr_step_fps: AVR step fps rate
*/
struct dsi_mode_info {
u32 h_active;
u32 h_back_porch;
u32 h_sync_width;
u32 h_front_porch;
u32 h_skew;
bool h_sync_polarity;
u32 v_active;
u32 v_back_porch;
u32 v_sync_width;
u32 v_front_porch;
bool v_sync_polarity;
u32 refresh_rate;
u64 clk_rate_hz;
u64 min_dsi_clk_hz;
u32 mdp_transfer_time_us;
u32 dsi_transfer_time_us;
bool dsc_enabled;
bool vdc_enabled;
struct msm_display_dsc_info *dsc;
struct msm_display_vdc_info *vdc;
struct msm_ratio pclk_scale;
struct msm_roi_caps roi_caps;
u32 qsync_min_fps;
u32 avr_step_fps;
};
/**
* struct dsi_split_link_config - Split Link Configuration
* @enabled: Split Link Enabled.
* @sublink_swap: Split link left right sublinks swap.
* @num_sublinks: Number of sublinks.
* @lanes_per_sublink: Number of lanes per sublink.
* @panel_mode: Specifies cmd or video mode.
* @lanes_enabled: Specifies what all lanes are enabled.
*/
struct dsi_split_link_config {
bool enabled;
bool sublink_swap;
u32 num_sublinks;
u32 lanes_per_sublink;
u8 lanes_enabled;
enum dsi_op_mode panel_mode;
};
/**
* struct dsi_host_common_cfg - Host configuration common to video and cmd mode
* @dst_format: Destination pixel format.
* @data_lanes: Physical data lanes to be enabled.
* @num_data_lanes: Number of physical data lanes.
* @bpp: Number of bits per pixel.
* @bpp_switch_enabled: Check if bpp switch is enabled without DSC.
* @en_crc_check: Enable CRC checks.
* @en_ecc_check: Enable ECC checks.
* @te_mode: Source for TE signalling.
* @mdp_cmd_trigger: MDP frame update trigger for command mode.
* @dma_cmd_trigger: Command DMA trigger.
* @cmd_trigger_stream: Command mode stream to trigger.
* @swap_mode: DSI color swap mode.
* @bit_swap_read: Is red color bit swapped.
* @bit_swap_green: Is green color bit swapped.
* @bit_swap_blue: Is blue color bit swapped.
* @t_clk_post: Number of byte clock cycles that the transmitter shall
* continue sending after last data lane has transitioned
* to LP mode.
* @t_clk_pre: Number of byte clock cycles that the high spped clock
* shall be driven prior to data lane transitions from LP
* to HS mode.
* @ignore_rx_eot: Ignore Rx EOT packets if set to true.
* @append_tx_eot: Append EOT packets for forward transmissions if set to
* true.
* @ext_bridge_mode: External bridge is connected.
* @force_hs_clk_lane: Send continuous clock to the panel.
* @phy_type: DPHY/CPHY is enabled for this panel.
* @dsi_split_link_config: Split Link Configuration.
* @byte_intf_clk_div: Determines the factor for calculating byte intf clock.
* @dma_sched_line: Line at which dma command gets triggered. In case of
* video mode it is the line number after vactive and for
* cmd it points to the line after TE.
* @dma_sched_window: Determines the width of the window during the
* DSI command will be sent by the HW.
* @vpadding: panel stacking height.
* @line_insertion_enable: line insertion support enable.
*/
struct dsi_host_common_cfg {
enum dsi_pixel_format dst_format;
enum dsi_data_lanes data_lanes;
u8 num_data_lanes;
u8 bpp;
bool bpp_switch_enabled;
bool en_crc_check;
bool en_ecc_check;
enum dsi_te_mode te_mode;
enum dsi_trigger_type mdp_cmd_trigger;
enum dsi_trigger_type dma_cmd_trigger;
u32 cmd_trigger_stream;
enum dsi_color_swap_mode swap_mode;
bool bit_swap_red;
bool bit_swap_green;
bool bit_swap_blue;
u32 t_clk_post;
u32 t_clk_pre;
bool ignore_rx_eot;
bool append_tx_eot;
bool ext_bridge_mode;
bool force_hs_clk_lane;
enum dsi_phy_type phy_type;
struct dsi_split_link_config split_link;
u32 byte_intf_clk_div;
u32 dma_sched_line;
u32 dma_sched_window;
u32 vpadding;
bool line_insertion_enable;
};
/**
* struct dsi_video_engine_cfg - DSI video engine configuration
* @last_line_interleave_en: Allow command mode op interleaved on last line of
* video stream.
* @pulse_mode_hsa_he: Send HSA and HE following VS/VE packet if set to
* true.
* @hfp_lp11_en: Enter low power stop mode (LP-11) during HFP.
* @hbp_lp11_en: Enter low power stop mode (LP-11) during HBP.
* @hsa_lp11_en: Enter low power stop mode (LP-11) during HSA.
* @eof_bllp_lp11_en: Enter low power stop mode (LP-11) during BLLP of
* last line of a frame.
* @bllp_lp11_en: Enter low power stop mode (LP-11) during BLLP.
* @traffic_mode: Traffic mode for video stream.
* @vc_id: Virtual channel identifier.
*/
struct dsi_video_engine_cfg {
bool last_line_interleave_en;
bool pulse_mode_hsa_he;
bool hfp_lp11_en;
bool hbp_lp11_en;
bool hsa_lp11_en;
bool eof_bllp_lp11_en;
bool bllp_lp11_en;
enum dsi_video_traffic_mode traffic_mode;
u32 vc_id;
};
/**
* struct dsi_cmd_engine_cfg - DSI command engine configuration
* @max_cmd_packets_interleave Maximum number of command mode RGB packets to
* send with in one horizontal blanking period
* of the video mode frame.
* @wr_mem_start: DCS command for write_memory_start.
* @wr_mem_continue: DCS command for write_memory_continue.
* @insert_dcs_command: Insert DCS command as first byte of payload
* of the pixel data.
* @mdp_idle_ctrl_en: Enable idle insertion between command mode mdp packets.
* @mdp_idle_ctrl_len: No. of dsi pclk cycles of idle time to insert between
* command mode mdp packets.
*/
struct dsi_cmd_engine_cfg {
u32 max_cmd_packets_interleave;
u32 wr_mem_start;
u32 wr_mem_continue;
bool insert_dcs_command;
bool mdp_idle_ctrl_en;
u32 mdp_idle_ctrl_len;
};
/**
* struct dsi_host_config - DSI host configuration parameters.
* @panel_mode: Operation mode for panel (video or cmd mode).
* @common_config: Host configuration common to both Video and Cmd mode.
* @video_engine: Video engine configuration if panel is in video mode.
* @cmd_engine: Cmd engine configuration if panel is in cmd mode.
* @esc_clk_rate_hz: Esc clock frequency in Hz.
* @bit_clk_rate_hz: Bit clock frequency in Hz.
* @bit_clk_rate_hz_override: DSI bit clk rate override from dt/sysfs.
* @video_timing: Video timing information of a frame.
* @lane_map: Mapping between logical and physical lanes.
*/
struct dsi_host_config {
enum dsi_op_mode panel_mode;
struct dsi_host_common_cfg common_config;
union {
struct dsi_video_engine_cfg video_engine;
struct dsi_cmd_engine_cfg cmd_engine;
} u;
u64 esc_clk_rate_hz;
u64 bit_clk_rate_hz;
u64 bit_clk_rate_hz_override;
struct dsi_mode_info video_timing;
struct dsi_lane_map lane_map;
};
/**
* struct dsi_display_mode_priv_info - private mode info that will be attached
* with each drm mode
* @cmd_sets: Command sets of the mode
* @phy_timing_val: Phy timing values
* @phy_timing_len: Phy timing array length
* @panel_jitter: Panel jitter for RSC backoff
* @panel_prefill_lines: Panel prefill lines for RSC
* @mdp_transfer_time_us: Specifies the mdp transfer time for command mode
* panels in microseconds.
* @mdp_transfer_time_us_min: Specifies the minimum possible mdp transfer time
* for command mode panels in microseconds.
* @mdp_transfer_time_us_max: Specifies the maximum possible mdp transfer time
* for command mode panels in microseconds.
* @dsi_transfer_time_us: Specifies the dsi transfer time for cmd panels.
* @qsync_min_fps: Qsync min fps value for the mode
* @avr_step_fps: AVR step fps value for the mode
* @clk_rate_hz: DSI bit clock per lane in hz.
* @min_dsi_clk_hz: Min dsi clk per lane to transfer frame in vsync time.
* @bit_clk_list: List of dynamic bit clock rates supported.
* @topology: Topology selected for the panel
* @dsc: DSC compression info
* @vdc: VDC compression info
* @wd_jitter: WD Jitter config.
* @dsc_enabled: DSC compression enabled
* @vdc_enabled: VDC compression enabled
* @pclk_scale: pclk scale factor, target bpp to source bpp
* @roi_caps: Panel ROI capabilities
* @widebus_support 48 bit wide data bus is supported by hw
* @allowed_mode_switch: BIT mask to mark allowed mode switches
* @disable_rsc_solver: Dynamically disable RSC solver for the timing mode.
*/
struct dsi_display_mode_priv_info {
struct dsi_panel_cmd_set cmd_sets[DSI_CMD_SET_MAX];
u32 *phy_timing_val;
u32 phy_timing_len;
u32 panel_jitter_numer;
u32 panel_jitter_denom;
u32 panel_prefill_lines;
u32 mdp_transfer_time_us;
u32 mdp_transfer_time_us_min;
u32 mdp_transfer_time_us_max;
u32 dsi_transfer_time_us;
u32 qsync_min_fps;
u32 avr_step_fps;
u64 clk_rate_hz;
u64 min_dsi_clk_hz;
struct msm_dyn_clk_list bit_clk_list;
struct msm_display_topology topology;
struct msm_display_dsc_info dsc;
struct msm_display_vdc_info vdc;
struct msm_display_wd_jitter_config wd_jitter;
bool dsc_enabled;
bool vdc_enabled;
struct msm_ratio pclk_scale;
struct msm_roi_caps roi_caps;
bool widebus_support;
u32 allowed_mode_switch;
bool disable_rsc_solver;
};
/**
* struct dsi_display_mode - specifies mode for dsi display
* @timing: Timing parameters for the panel.
* @pixel_clk_khz: Pixel clock in Khz.
* @dsi_mode_flags: Flags to signal other drm components via private flags
* @panel_mode_caps: panel mode capabilities.
* @pixel_format_caps: pixel format capabilities.
* @bpp: bits per pixel.
* @is_preferred: Is mode preferred
* @mode_idx: Mode index as defined by devicetree.
* @priv_info: Mode private info
*/
struct dsi_display_mode {
struct dsi_mode_info timing;
u32 pixel_clk_khz;
u32 dsi_mode_flags;
u32 panel_mode_caps;
u32 pixel_format_caps;
u32 bpp;
bool is_preferred;
u32 mode_idx;
struct dsi_display_mode_priv_info *priv_info;
};
/**
* struct dsi_rect - dsi rectangle representation
* Note: sde_rect is also using u16, this must be maintained for memcpy
*/
struct dsi_rect {
u16 x;
u16 y;
u16 w;
u16 h;
};
/**
* dsi_rect_intersect - intersect two rectangles
* @r1: first rectangle
* @r2: scissor rectangle
* @result: result rectangle, all 0's on no intersection found
*/
void dsi_rect_intersect(const struct dsi_rect *r1,
const struct dsi_rect *r2,
struct dsi_rect *result);
/**
* dsi_rect_is_equal - compares two rects
* @r1: rect value to compare
* @r2: rect value to compare
*
* Returns true if the rects are same
*/
static inline bool dsi_rect_is_equal(struct dsi_rect *r1,
struct dsi_rect *r2)
{
return r1->x == r2->x && r1->y == r2->y && r1->w == r2->w &&
r1->h == r2->h;
}
struct dsi_event_cb_info {
uint32_t event_idx;
void *event_usr_ptr;
int (*event_cb)(void *event_usr_ptr,
uint32_t event_idx, uint32_t instance_idx,
uint32_t data0, uint32_t data1,
uint32_t data2, uint32_t data3);
};
/**
* enum dsi_error_status - various dsi errors
* @DSI_FIFO_OVERFLOW: DSI FIFO Overflow error
* @DSI_FIFO_UNDERFLOW: DSI FIFO Underflow error
* @DSI_LP_Rx_TIMEOUT: DSI LP/RX Timeout error
* @DSI_PLL_UNLOCK_ERR: DSI PLL unlock error
*/
enum dsi_error_status {
DSI_FIFO_OVERFLOW = 1,
DSI_FIFO_UNDERFLOW,
DSI_LP_Rx_TIMEOUT,
DSI_PLL_UNLOCK_ERR,
DSI_ERR_INTR_ALL,
};
/* structure containing the delays required for dynamic clk */
struct dsi_dyn_clk_delay {
u32 pipe_delay;
u32 pipe_delay2;
u32 pll_delay;
};
/* dynamic refresh control bits */
enum dsi_dyn_clk_control_bits {
DYN_REFRESH_INTF_SEL = 1,
DYN_REFRESH_SYNC_MODE,
DYN_REFRESH_SW_TRIGGER,
DYN_REFRESH_SWI_CTRL,
};
/* convert dsi pixel format into bits per pixel */
static inline int dsi_pixel_format_to_bpp(enum dsi_pixel_format fmt)
{
switch (fmt) {
case DSI_PIXEL_FORMAT_RGB888:
case DSI_PIXEL_FORMAT_MAX:
return 24;
case DSI_PIXEL_FORMAT_RGB666:
case DSI_PIXEL_FORMAT_RGB666_LOOSE:
return 18;
case DSI_PIXEL_FORMAT_RGB565:
return 16;
case DSI_PIXEL_FORMAT_RGB111:
return 3;
case DSI_PIXEL_FORMAT_RGB332:
return 8;
case DSI_PIXEL_FORMAT_RGB444:
return 12;
case DSI_PIXEL_FORMAT_RGB101010:
return 30;
}
return 24;
}
static inline u64 dsi_h_active_dce(struct dsi_mode_info *mode)
{
u64 h_active = 0;
if (mode->dsc_enabled && mode->dsc)
h_active = mode->dsc->pclk_per_line;
else if (mode->vdc_enabled && mode->vdc)
h_active = mode->vdc->pclk_per_line;
else
h_active = mode->h_active;
return h_active;
}
static inline u64 dsi_h_total_dce(struct dsi_mode_info *mode)
{
u64 h_total = dsi_h_active_dce(mode);
h_total += mode->h_back_porch + mode->h_front_porch +
mode->h_sync_width;
return h_total;
}
/*
* dsi_is_type_cphy - check if panel type is cphy
* @cfg: Pointer to dsi host common cfg
* Returns: True if panel type is cphy
*/
static inline bool dsi_is_type_cphy(struct dsi_host_common_cfg *cfg)
{
return (cfg->phy_type == DSI_PHY_TYPE_CPHY) ? true : false;
}
/**
* dsi_host_transfer_sub() - transfers DSI commands from host to panel
* @host: pointer to the DSI mipi host device
* @cmd: DSI command to be transferred
*
* Return: error code.
*/
int dsi_host_transfer_sub(struct mipi_dsi_host *host, struct dsi_cmd_desc *cmd);
#endif /* _DSI_DEFS_H_ */
Reference in New Issue View Git Blame Copy Permalink