/*
* Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef WLAN_PMO_COMMON_CFG_H__
#define WLAN_PMO_COMMON_CFG_H__
#include "wlan_pmo_common_public_struct.h"
/*
*
* hostArpOffload - Enable/disable host ARP offload
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to enable/disable host ARP offload.
*
* Usage: External
*
*
*/
#define CFG_PMO_ENABLE_HOST_ARPOFFLOAD CFG_INI_BOOL( \
"hostArpOffload", \
1, \
"enable/disable host arp offload")
/*
*
* gHwFilterMode - configure hardware filter for DTIM mode
* @Min: 0
* @Max: 3
* @Default: 1
*
* The hardware filter is only effective in DTIM mode. Use this configuration
* to blanket drop broadcast/multicast packets at the hardware level, without
* waking up the firmware
*
* Takes a bitmap of frame types to drop
* @E.g.
* # disable feature
* gHwFilterMode=0
* # drop all broadcast frames, except ARP (default)
* gHwFilterMode=1
* # drop all multicast frames, except ICMPv6
* gHwFilterMode=2
* # drop all broadcast and multicast frames, except ARP and ICMPv6
* gHwFilterMode=3
*
* Related: N/A
*
* Usage: Internal/External
*
*
*/
#define CFG_PMO_HW_FILTER_MODE CFG_INI_UINT( \
"gHwFilterMode", \
0, \
3, \
1, \
CFG_VALUE_OR_DEFAULT, \
"hardware filter for DTIM mode")
/*
*
* ssdp - Enable/disable ssdp
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to enable/disable ssdp.
*
* Usage: External
*
*
*/
#define CFG_PMO_ENABLE_HOST_SSDP CFG_INI_BOOL( \
"ssdp", \
1, \
"Enable/disable ssdp")
/*
*
* hostNSOffload - Enable/disable NS offload
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to enable/disable NS offload.
*
* Usage: External
*
*
*/
#define CFG_PMO_ENABLE_HOST_NSOFFLOAD CFG_INI_BOOL( \
"hostNSOffload", \
1, \
"Enable/disable NS offload")
/*
*
* gEnableDynamicDTIM - Enable Dynamic DTIM
* @Min: 0
* @Max: 9
* @Default: 0
*
* This ini is used to enable/disable ssdp.
*
* 0 -Disable DynamicDTIM
* 1 to 5 - SLM will switch to DTIM specified here when host suspends and
* switch DTIM1 when host resumes
*
* Usage: External
*
*
*/
#define CFG_PMO_ENABLE_DYNAMIC_DTIM CFG_INI_UINT( \
"gEnableDynamicDTIM", \
0, \
9, \
0, \
CFG_VALUE_OR_DEFAULT, \
"Enable Dynamic DTIM")
/*
*
* gEnableDynamicDTIM - Enable/Disable modulated DTIM feature
* @Min: 0
* @Max: 5
* @Default: 0
*
* This ini is used to enable/disable modulated DTIM feature.
*
* Usage: External
*
*
*/
#define CFG_PMO_ENABLE_MODULATED_DTIM CFG_INI_UINT( \
"gEnableModulatedDTIM", \
0, \
5, \
0, \
CFG_VALUE_OR_DEFAULT, \
"Enable/disable modulated DTIM feature")
/*
*
* gMCAddrListEnable - Enable/disable multicast MAC address list feature
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to enable/disable multicast MAC address list feature.
* Default: Enable
*
* Related: None
*
* Supported Feature: STA
*
* Usage: Internal/External
*
*
*/
#define CFG_PMO_MC_ADDR_LIST_ENABLE CFG_INI_BOOL( \
"gMCAddrListEnable", \
1, \
"Enable/disable multicast MAC address list feature")
/*
*
* gEnablePowerSaveOffload - Enable Power Save Offload
* @Min: 0
* @Max: 5
* @Default: 0
*
* This ini is used to set Power Save Offload configuration:
* Current values of gEnablePowerSaveOffload:
* 0 -> Power save offload is disabled
* 1 -> Legacy Power save enabled + Deep sleep Disabled
* 2 -> QPower enabled + Deep sleep Disabled
* 3 -> Legacy Power save enabled + Deep sleep Enabled
* 4 -> QPower enabled + Deep sleep Enabled
* 5 -> Duty cycling QPower enabled
*
* Related: None
*
* Supported Feature: Power Save
*
* Usage: External
*
*
*/
#define CFG_PMO_POWERSAVE_OFFLOAD CFG_INI_UINT( \
"gEnablePowerSaveOffload", \
0, \
5, \
0, \
CFG_VALUE_OR_DEFAULT, \
"Enable Power Save Offload")
/*
*
* gMaxPsPoll - Max powersave poll
* @Min: 0
* @Max: 255
* @Default: 0
*
* This ini is used to set max powersave poll.
*
* Usage: External
*
*
*/
#define CFG_PMO_MAX_PS_POLL CFG_INI_UINT( \
"gMaxPsPoll", \
0, \
255, \
0, \
CFG_VALUE_OR_DEFAULT, \
"Max powersave poll")
/*
*
* gEnableWoW - Enable/Disable WoW
* @Min: 0
* @Max: 3
* @Default: 3
*
* This ini is used to enable/disable WoW. Configurations are as follows:
* 0 - Disable both magic pattern match and pattern byte match.
* 1 - Enable magic pattern match on all interfaces.
* 2 - Enable pattern byte match on all interfaces.
* 3 - Enable both magic patter and pattern byte match on all interfaces.
*
* Related: None
*
* Supported Feature: Power Save
*
* Usage: External
*
*
*/
#define CFG_PMO_WOW_ENABLE CFG_INI_UINT("gEnableWoW", \
0, 3, 3, \
CFG_VALUE_OR_DEFAULT, \
"Enable WoW Support")
/*
*
* wowlan_deauth_enable - Enable/Disable wowlan deauth enable
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to enable/disable wowlan deauth enable.
*
* Related: None
*
* Supported Feature: Power Save
*
* Usage: External
*
*
*/
#define CFG_PMO_WOWLAN_DEAUTH_ENABLE CFG_INI_BOOL("wowlan_deauth_enable", \
1, \
"Enable WoWLan deauth")
/*
*
* wowlan_disassoc_enable - Enable/Disable wowlan disassoc enable
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to enable/disable wowlan disassoc enable.
*
* Related: None
*
* Supported Feature: Power Save
*
* Usage: External
*
*
*/
#define CFG_PMO_WOWLAN_DISASSOC_ENABLE CFG_INI_BOOL("wowlan_disassoc_enable", \
1, \
"Enable WoW Support")
/*
*
* gActiveModeOffload - Active offload mode configuration
* @Min: 0
* @Max: 1
* @Default: 1
*
* When set to 1 active mode offload will be enabled.
*
* If active mode offload is enabled then all applicable data offload/filtering
* is enabled immediately in FW once config is available in WLAN driver and FW
* caches this configuration across suspend/resume;
* If active mode offload is disabled then all applicable data offload/filtering
* is enabled during cfg80211 suspend and disabled during cfg80211 resume.
*
* Supported Feature: Active mode offload
*
* Usage: External
*
*
*/
#define CFG_PMO_ACTIVE_MODE CFG_INI_BOOL("gActiveModeOffload", \
1, \
"Enable active mode offload")
/*
*
* g_auto_detect_power_failure_mode - Auto detect power save failure mode
* @Min: PMO_FW_TO_CRASH_ON_PWR_FAILURE
* @Max: PMO_AUTO_PWR_FAILURE_DETECT_DISABLE
* @Default: PMO_FW_TO_CRASH_ON_PWR_FAILURE
*
* Specifies the behavior of FW in case of CHIP_POWER_SAVE_FAIL_DETECTED event
*
* Supported Feature: Auto detect power save failure
*
* Usage: External
*
*
*/
#define CFG_PMO_PWR_FAILURE CFG_INI_UINT("g_auto_detect_power_failure_mode", \
PMO_FW_TO_CRASH_ON_PWR_FAILURE, \
PMO_AUTO_PWR_FAILURE_DETECT_DISABLE, \
PMO_FW_TO_CRASH_ON_PWR_FAILURE, \
CFG_VALUE_OR_DEFAULT, \
"Auto detect power save failure mode")
/*
*
* gEnableSapSuspend - Enable/disable SAP Suspend
* @Min: 0
* @Max: 1
* @Default: 0
*
*
* Related: None
*
* Supported Feature: SAP
*
* Usage: External
*
*
*/
#define CFG_ENABLE_SAP_SUSPEND CFG_INI_BOOL( \
"gEnableSapSuspend", \
1, \
"Enable/disable SAP Suspend")
#define CFG_PMO_COMMON_ALL \
CFG(CFG_ENABLE_SAP_SUSPEND) \
CFG(CFG_PMO_ENABLE_HOST_ARPOFFLOAD) \
CFG(CFG_PMO_HW_FILTER_MODE) \
CFG(CFG_PMO_ENABLE_HOST_SSDP) \
CFG(CFG_PMO_ENABLE_HOST_NSOFFLOAD) \
CFG(CFG_PMO_ENABLE_DYNAMIC_DTIM) \
CFG(CFG_PMO_ENABLE_MODULATED_DTIM) \
CFG(CFG_PMO_MC_ADDR_LIST_ENABLE) \
CFG(CFG_PMO_POWERSAVE_OFFLOAD) \
CFG(CFG_PMO_MAX_PS_POLL) \
CFG(CFG_PMO_WOWLAN_DEAUTH_ENABLE) \
CFG(CFG_PMO_WOWLAN_DISASSOC_ENABLE) \
CFG(CFG_PMO_WOW_ENABLE) \
CFG(CFG_PMO_ACTIVE_MODE) \
CFG(CFG_PMO_PWR_FAILURE)
#endif /* WLAN_PMO_COMMON_CFG_H__ */