/* * Copyright (c) 2012-2020 The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for * any purpose with or without fee is hereby granted, provided that the * above copyright notice and this permission notice appear in all * copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR * PERFORMANCE OF THIS SOFTWARE. */ /** * DOC: This file contains centralized definitions of converged configuration. */ #ifndef __CFG_MLME_SAP_H #define __CFG_MLME_SAP_H #define STR_SSID_DEFAULT "1234567890" #define STR_SSID_DEFAULT_LEN sizeof(STR_SSID_DEFAULT) #define CFG_SSID CFG_STRING( \ "cfg_ssid", \ 0, \ STR_SSID_DEFAULT_LEN, \ STR_SSID_DEFAULT, \ "CFG_SSID") #define CFG_BEACON_INTERVAL CFG_INI_UINT( \ "gBeaconInterval", \ 0, \ 65535, \ 100, \ CFG_VALUE_OR_DEFAULT, \ "CFG_BEACON_INTERVAL") #define CFG_DTIM_PERIOD CFG_UINT( \ "cfg_dtim_period", \ 0, \ 65535, \ 1, \ CFG_VALUE_OR_DEFAULT, \ "CFG_DTIM_PERIOD") #define CFG_LISTEN_INTERVAL CFG_UINT( \ "cfg_listen_interval", \ 0, \ 65535, \ 1, \ CFG_VALUE_OR_DEFAULT, \ "CFG_LISTEN_INTERVAL") #define CFG_11G_ONLY_POLICY CFG_UINT( \ "cfg_11g_only_policy", \ 0, \ 1, \ 0, \ CFG_VALUE_OR_DEFAULT, \ "CFG_11G_ONLY_POLICY") #define CFG_ASSOC_STA_LIMIT CFG_UINT( \ "cfg_assoc_sta_limit", \ 1, \ 64, \ 10, \ CFG_VALUE_OR_DEFAULT, \ "CFG_ASSOC_STA_LIMIT") /* * <ini> * cfg_enable_lte_coex - enable LTE COEX * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to enable LTE COEX * * Related: None * * Supported Feature: STA * * Usage: Internal/External * * </ini> */ #define CFG_ENABLE_LTE_COEX CFG_INI_BOOL( \ "gEnableLTECoex", \ 0, \ "enabled lte coex") /* * <ini> * cfg_rate_for_tx_mgmt - Set rate for tx mgmt * @Min: 0 * @Max: 0xFF * @Default: 0xFF * * This ini is used to set rate for tx mgmt * * Related: None * * Supported Feature: STA * * Usage: Internal/External * * </ini> */ #define CFG_RATE_FOR_TX_MGMT CFG_INI_UINT( \ "gRateForTxMgmt", \ 0, \ 0xFF, \ 0xFF, \ CFG_VALUE_OR_DEFAULT, \ "set rate for mgmt tx") /* * <ini> * cfg_rate_for_tx_mgmt_2g - Set rate for tx mgmt 2g * @Min: 0 * @Max: 255 * @Default: 255 * * This ini is used to set rate for tx mgmt 2g * Related: None * * Supported Feature: STA * * Usage: Internal/External * * </ini> */ #define CFG_RATE_FOR_TX_MGMT_2G CFG_INI_UINT( \ "gRateForTxMgmt2G", \ 0, \ 255, \ 255, \ CFG_VALUE_OR_DEFAULT, \ "set rate for mgmt tx 2g") /* * <ini> * cfg_rate_for_tx_mgmt_5g - Set rate for tx mgmt 5g * @Min: 0 * @Max: 255 * @Default: 255 * * This ini is used to set rate for tx mgmt 5g * * Related: None * * Supported Feature: STA * * Usage: Internal/External * * </ini> */ #define CFG_RATE_FOR_TX_MGMT_5G CFG_INI_UINT( \ "gRateForTxMgmt5G", \ 0, \ 255, \ 255, \ CFG_VALUE_OR_DEFAULT, \ "set rate for mgmt tx 5g") /* * <ini> * gTelescopicBeaconWakeupEn - Set teles copic beacon wakeup * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to set default teles copic beacon wakeup * * Related: None * * Supported Feature: STA * * Usage: Internal/External * * </ini> */ #define CFG_TELE_BCN_WAKEUP_EN CFG_INI_BOOL( \ "gTelescopicBeaconWakeupEn", \ 0, \ "set tescopic beacon wakeup") /* * <ini> * telescopicBeaconMaxListenInterval - Set teles scopic beacon max listen value * @Min: 0 * @Max: 7 * @Default: 5 * * This ini is used to set teles scopic beacon max listen interval value * * Related: None * * Supported Feature: STA * * Usage: Internal/External * * </ini> */ #define CFG_TELE_BCN_MAX_LI CFG_INI_UINT( \ "telescopicBeaconMaxListenInterval", \ 0, \ 7, \ 5, \ CFG_VALUE_OR_DEFAULT, \ "set telescopic beacon max listen") /* * <ini> * gSapGetPeerInfo - Enable/Disable remote peer info query support * @Min: 0 - Disable remote peer info query support * @Max: 1 - Enable remote peer info query support * @Default: 1 * * This ini is used to enable/disable remote peer info query support * * Usage: External * * </ini> */ #define CFG_SAP_GET_PEER_INFO CFG_INI_BOOL( \ "gSapGetPeerInfo", \ 1, \ "sap get peer info") /* * <ini> * gSapAllowAllChannel - Sap allow all channels * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to allow all channels for SAP * * Related: None * * Supported Feature: SAP * * Usage: Internal/External * * </ini> */ #define CFG_SAP_ALLOW_ALL_CHANNEL_PARAM CFG_INI_BOOL( \ "gSapAllowAllChannel", \ 0, \ "sap allow all channel params") /* * <ini> * gSoftApMaxPeers - Set Max peers connected for SAP * @Min: 1 * @Max: 64 * @Default: 32 * * This ini is used to set Max peers connected for SAP * * Related: None * * Supported Feature: SAP * * Usage: Internal/External * * </ini> */ #define CFG_SAP_MAX_NO_PEERS CFG_INI_UINT( \ "gSoftApMaxPeers", \ 1, \ 64, \ 32, \ CFG_VALUE_OR_DEFAULT, \ "max no of peers") /* * <ini> * gMaxOffloadPeers - Set max offload peers * @Min: 2 * @Max: 5 * @Default: 2 * * This ini is used to set default teles copic beacon wakeup * * Related: None * * Supported Feature: STA * * Usage: Internal/External * * </ini> */ #define CFG_SAP_MAX_OFFLOAD_PEERS CFG_INI_UINT( \ "gMaxOffloadPeers", \ 2, \ 5, \ 2, \ CFG_VALUE_OR_DEFAULT, \ "max offload peers") /* * <ini> * gMaxOffloadReorderBuffs - Set max offload reorder buffs * @Min: 0 * @Max: 3 * @Default: 2 * * This ini is used to set max offload reorder buffs * * Related: None * * Supported Feature: STA * * Usage: Internal/External * * </ini> */ #define CFG_SAP_MAX_OFFLOAD_REORDER_BUFFS CFG_INI_UINT( \ "gMaxOffloadReorderBuffs", \ 0, \ 3, \ 2, \ CFG_VALUE_OR_DEFAULT, \ "sap max offload reorder buffs") /* * <ini> * g_sap_chanswitch_beacon_cnt - Set channel switch beacon count * @Min: 1 * @Max: 10 * @Default: 10 * * This ini is used to set channel switch beacon count * * Related: None * * Supported Feature: STA * * Usage: Internal/External * * </ini> */ #define CFG_SAP_CH_SWITCH_BEACON_CNT CFG_INI_UINT( \ "g_sap_chanswitch_beacon_cnt", \ 1, \ 10, \ 10, \ CFG_VALUE_OR_DEFAULT, \ "set channel switch beacon count") /* * <ini> * g_sap_chanswitch_mode - channel switch mode * @Min: 0 * @Max: 1 * @Default: 1 * * This ini is used to configure the value of channel switch mode, which is * contained in the Channel Switch Announcement(CSA) information element sent * by an SAP. * * 0 - CSA receiving STA doesn't need to do anything * 1 - CSA receiving STA shall not transmit any more frames on the channel * until the scheduled channel switch occurs * * Related: none * * Supported Feature: SAP * * Usage: External * * </ini> */ #define CFG_SAP_CH_SWITCH_MODE CFG_INI_BOOL( \ "g_sap_chanswitch_mode", \ 1, \ "sap channel switch mode") /* * <ini> * gEnableSapInternalRestart - Sap internal restart name * @Min: 0 * @Max: 1 * @Default: 1 * * This ini is used for sap internal restart name * * Related: None * * Supported Feature: SAP * * Usage: Internal/External * * </ini> */ #define CFG_SAP_INTERNAL_RESTART CFG_INI_BOOL( \ "gEnableSapInternalRestart", \ 1, \ "sap internal restart") /* * <ini> * gChanSwitchHostapdRateEnabled - Enable channale switch hostapd rate * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to enable channale switch hostapd rate * * Related: None * * Supported Feature: SAP * * Usage: Internal/External * * </ini> */ #define CFG_CHAN_SWITCH_HOSTAPD_RATE_ENABLED_NAME CFG_INI_BOOL( \ "gChanSwitchHostapdRateEnabled", \ 0, \ "chan switch hostapd rate enabled") /* * <ini> * gReducedBeaconInterval - beacon interval reduced * @Min: 0 * @Max: 100 * @Default: 0 * * This ini is used to reduce beacon interval before channel * switch (when val great than 0, or the feature is disabled). * It would reduce the downtime on the STA side which is * waiting for beacons from the AP to resume back transmission. * Switch back the beacon_interval to its original value after * channel switch based on the timeout. * * Related: none * * Usage: External * * </ini> */ #define CFG_REDUCED_BEACON_INTERVAL CFG_INI_UINT( \ "gReducedBeaconInterval", \ 0, \ 100, \ 0, \ CFG_VALUE_OR_DEFAULT, \ "reduced beacon interval") /* * <ini> * gCountryCodePriority - Priority to set country code * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to set default gCountryCodePriority * * Related: None * * Supported Feature: SAP * * Usage: Internal/External * * </ini> */ #define CFG_COUNTRY_CODE_PRIORITY CFG_INI_BOOL( \ "gCountryCodePriority", \ 0, \ "Country code priority") /* * <ini> * gSapPreferredChanLocation - Restrict channel switches between ondoor and * outdoor. * @Min: 0 * @Max: 2 * @Default: 0 * * This ini is used for restricting channel switches between Indoor and outdoor * channels after radar detection. * 0- No preferred channel location * 1- Use indoor channels only * 2- Use outdoor channels only * Related: NA. * * Supported Feature: DFS * * Usage: Internal/External * * </ini> */ #define CFG_SAP_PREF_CHANNEL_LOCATION CFG_INI_UINT( \ "gSapPreferredChanLocation", \ 0, \ 2, \ 0, \ CFG_VALUE_OR_DEFAULT, \ "Sap preferred channel location") /* * <ini> * gSapForce11NFor11AC - Restrict SAP to 11n if set 1 even though * hostapd.conf request for 11ac. * @Min: 0 * @Max: 1 * @Default: 0 * * Restrict SAP to 11n if set 1 even though hostapd.conf request for 11ac. * * 0- Do not force 11n for 11ac. * 1- Force 11n for 11ac. * * Supported Feature: SAP * * Usage: Internal/External * * </ini> */ #define CFG_SAP_FORCE_11N_FOR_11AC CFG_INI_BOOL( \ "gSapForce11NFor11AC", \ 0, \ "Sap force 11n for 11ac") /* * <ini> * gGoForce11NFor11AC - Restrict GO to 11n if set 1 even though * hostapd.conf request for 11ac. * @Min: 0 * @Max: 1 * @Default: 0 * * Restrict GO to 11n if set 1 even though hostapd.conf request for 11ac. * * 0- Do not force 11n for 11ac. * 1- Force 11n for 11ac. * * Supported Feature: GO * * Usage: Internal/External * * </ini> */ #define CFG_GO_FORCE_11N_FOR_11AC CFG_INI_BOOL( \ "gGoForce11NFor11AC", \ 0, \ "GO force 11n for 11ac") /* * <ini> * gEnableApRandomBssid - Create ramdom BSSID * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to create a random BSSID in SoftAP mode to meet * the Android requirement. * * Related: None. * * Supported Feature: SAP * * Usage: Internal/External * * </ini> */ #define CFG_AP_ENABLE_RANDOM_BSSID CFG_INI_BOOL( \ "gEnableApRandomBssid", \ 0, \ "Create ramdom BSSID") /* * <ini> * gSapChannelAvoidance - SAP MCC channel avoidance. * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to sets sap mcc channel avoidance. * * Related: None. * * Supported Feature: Concurrency * * Usage: Internal/External * * </ini> */ #define CFG_SAP_MCC_CHANNEL_AVOIDANCE CFG_INI_UINT( \ "gSapChannelAvoidance", \ 0, \ 1, \ 0, \ CFG_VALUE_OR_DEFAULT, \ "SAP MCC channel avoidance") /* * <ini> * gSAP11ACOverride - Override bw to 11ac for SAP in driver even if supplicant * or hostapd configures HT. * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to enable/disable 11AC override for SAP. * Android UI does not provide advanced configuration options * for SoftAP for Android O and below. * Default override disabled for android. Can be enabled from * ini for Android O and below. * * * Supported Feature: SAP * * * Usage: Internal/External * * </ini> */ #define CFG_SAP_11AC_OVERRIDE CFG_INI_BOOL( \ "gSAP11ACOverride", \ 0, \ "Override bw to 11ac for SAP") /* * <ini> * gGO11ACOverride - Override bw to 11ac for P2P GO * @Min: 0 * @Max: 1 * @Default: 1 * * This ini is used to enable/disable 11AC override for GO. * P2P GO also follows start_bss and since P2P GO could not be * configured to setup VHT channel width in wpa_supplicant, driver * can override 11AC. * * * Supported Feature: P2P * * * Usage: Internal/External * * </ini> */ #define CFG_GO_11AC_OVERRIDE CFG_INI_BOOL( \ "gGO11ACOverride", \ 1, \ "Override bw to 11ac for P2P GO") /* * * <ini> * enable_bcast_deauth_for_sap - Enable/Disable broadcast deauth support * in driver for SAP * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to enable/disable broadcast deauth support in driver * for sap mode. * * Related: None * * Supported Feature: SAP * Usage: External * * </ini> */ #define CFG_IS_SAP_BCAST_DEAUTH_ENABLED CFG_INI_BOOL( \ "enable_bcast_deauth_for_sap", \ 0, \ "Enable/Disable bcast deauth for SAP") #ifdef WLAN_FEATURE_SAE /* * * <ini> * enable_sae_for_sap - Enable/Disable SAE support in driver for SAP * @Min: 0 * @Max: 1 * @Default: 1 * * This ini is used to enable/disable SAE support in driver for SAP mode * Driver will process/drop the SAE authentication frames based on this config. * * Related: None * * Supported Feature: SAE * Usage: External * * </ini> */ #define CFG_IS_SAP_SAE_ENABLED CFG_INI_BOOL( \ "enable_sae_for_sap", \ 1, \ "Enable/Disable SAE support for SAP") #define CFG_SAP_SAE CFG(CFG_IS_SAP_SAE_ENABLED) #else #define CFG_SAP_SAE #endif /* WLAN_FEATURE_SAE */ /* * * <ini> * enable_sap_fils_discovery - Enable/Disable fils discovery for 6Ghz SAP * @Min: 0 * @Max: 1 * @Default: 1 * * Enable: 6Ghz SAP transmits fils discovery frame at every 20ms * Disable: 6Ghz SAP transmits probe response frame at every 20ms * * Related: None * * Supported Feature: SAP * Usage: External * * </ini> */ #define CFG_6G_SAP_FILS_DISCOVERY_ENABLED CFG_INI_BOOL( \ "enable_6g_sap_fils_discovery", \ 1, \ "Enable/Disable fils discovery for SAP") #define CFG_SAP_ALL \ CFG_SAP_SAE \ CFG(CFG_AP_ENABLE_RANDOM_BSSID) \ CFG(CFG_SSID) \ CFG(CFG_BEACON_INTERVAL) \ CFG(CFG_DTIM_PERIOD) \ CFG(CFG_LISTEN_INTERVAL) \ CFG(CFG_11G_ONLY_POLICY) \ CFG(CFG_ASSOC_STA_LIMIT) \ CFG(CFG_ENABLE_LTE_COEX) \ CFG(CFG_RATE_FOR_TX_MGMT) \ CFG(CFG_RATE_FOR_TX_MGMT_2G) \ CFG(CFG_RATE_FOR_TX_MGMT_5G) \ CFG(CFG_TELE_BCN_WAKEUP_EN) \ CFG(CFG_TELE_BCN_MAX_LI) \ CFG(CFG_SAP_MCC_CHANNEL_AVOIDANCE) \ CFG(CFG_SAP_GET_PEER_INFO) \ CFG(CFG_SAP_ALLOW_ALL_CHANNEL_PARAM) \ CFG(CFG_SAP_MAX_NO_PEERS) \ CFG(CFG_SAP_MAX_OFFLOAD_PEERS) \ CFG(CFG_SAP_MAX_OFFLOAD_REORDER_BUFFS) \ CFG(CFG_SAP_CH_SWITCH_BEACON_CNT) \ CFG(CFG_SAP_CH_SWITCH_MODE) \ CFG(CFG_SAP_INTERNAL_RESTART) \ CFG(CFG_CHAN_SWITCH_HOSTAPD_RATE_ENABLED_NAME) \ CFG(CFG_REDUCED_BEACON_INTERVAL) \ CFG(CFG_MAX_LI_MODULATED_DTIM) \ CFG(CFG_COUNTRY_CODE_PRIORITY) \ CFG(CFG_SAP_PREF_CHANNEL_LOCATION) \ CFG(CFG_SAP_FORCE_11N_FOR_11AC) \ CFG(CFG_SAP_11AC_OVERRIDE) \ CFG(CFG_GO_FORCE_11N_FOR_11AC) \ CFG(CFG_GO_11AC_OVERRIDE) \ CFG(CFG_IS_SAP_BCAST_DEAUTH_ENABLED) \ CFG(CFG_6G_SAP_FILS_DISCOVERY_ENABLED) #endif /* __CFG_MLME_SAP_H */