/*
* Copyright (c) 2013-2019 The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef WMA_H
#define WMA_H
#include "a_types.h"
#include "qdf_types.h"
#include "osapi_linux.h"
#include "htc_packet.h"
#include "i_qdf_event.h"
#include "wmi_services.h"
#include "wmi_unified.h"
#include "wmi_version.h"
#include "qdf_types.h"
#include "qdf_status.h"
#include "cds_sched.h"
#include "cds_config.h"
#include "sir_mac_prot_def.h"
#include "wma_types.h"
#include <linux/workqueue.h>
#include "utils_api.h"
#include "lim_types.h"
#include "wmi_unified_api.h"
#include "cdp_txrx_cmn.h"
#include "dbglog.h"
#include "cds_ieee80211_common.h"
#include "wlan_objmgr_psoc_obj.h"
#include <cdp_txrx_handle.h>
#include <wlan_policy_mgr_api.h>
#include "wma_api.h"
#include "wmi_unified_param.h"
#include "wmi.h"
/* Platform specific configuration for max. no. of fragments */
#define QCA_OL_11AC_TX_MAX_FRAGS 2
/* Private */
#define WMA_READY_EVENTID_TIMEOUT 6000
#define WMA_SERVICE_READY_EXT_TIMEOUT 6000
#define NAN_CLUSTER_ID_BYTES 4
#define WMA_CRASH_INJECT_TIMEOUT 5000
/* MAC ID to PDEV ID mapping is as given below
* MAC_ID PDEV_ID
* 0 1
* 1 2
* SOC Level WMI_PDEV_ID_SOC
*/
#define WMA_MAC_TO_PDEV_MAP(x) ((x) + (1))
#define WMA_PDEV_TO_MAC_MAP(x) ((x) - (1))
#define WMA_MAX_MGMT_MPDU_LEN 2000
#define MAX_PRINT_FAILURE_CNT 50
#define WMA_INVALID_VDEV_ID 0xFF
/* Deprecated logging macros, to be removed. Please do not use in new code */
#define WMA_LOGD(params ...) \
QDF_TRACE_DEBUG_NO_FL(QDF_MODULE_ID_WMA, params)
#define WMA_LOGI(params ...) \
QDF_TRACE_INFO_NO_FL(QDF_MODULE_ID_WMA, params)
#define WMA_LOGW(params ...) \
QDF_TRACE_WARN_NO_FL(QDF_MODULE_ID_WMA, params)
#define WMA_LOGE(params ...) \
QDF_TRACE_ERROR_NO_FL(QDF_MODULE_ID_WMA, params)
#define WMA_LOGP(params ...) \
QDF_TRACE_FATAL_NO_FL(QDF_MODULE_ID_WMA, params)
#define wma_alert(params...) QDF_TRACE_FATAL(QDF_MODULE_ID_WMA, params)
#define wma_err(params...) QDF_TRACE_ERROR(QDF_MODULE_ID_WMA, params)
#define wma_warn(params...) QDF_TRACE_WARN(QDF_MODULE_ID_WMA, params)
#define wma_info(params...) QDF_TRACE_INFO(QDF_MODULE_ID_WMA, params)
#define wma_debug(params...) QDF_TRACE_DEBUG(QDF_MODULE_ID_WMA, params)
#define wma_debug_rl(params...) QDF_TRACE_DEBUG_RL(QDF_MODULE_ID_WMA, params)
#define wma_err_rl(params...) QDF_TRACE_ERROR_RL(QDF_MODULE_ID_WMA, params)
#define wma_nofl_alert(params...) \
QDF_TRACE_FATAL_NO_FL(QDF_MODULE_ID_WMA, params)
#define wma_nofl_err(params...) \
QDF_TRACE_ERROR_NO_FL(QDF_MODULE_ID_WMA, params)
#define wma_nofl_warn(params...) \
QDF_TRACE_WARN_NO_FL(QDF_MODULE_ID_WMA, params)
#define wma_nofl_info(params...) \
QDF_TRACE_INFO_NO_FL(QDF_MODULE_ID_WMA, params)
#define wma_nofl_debug(params...) \
QDF_TRACE_DEBUG_NO_FL(QDF_MODULE_ID_WMA, params)
#define WMA_DEBUG_ALWAYS
#ifdef WMA_DEBUG_ALWAYS
#define WMA_LOGA(params ...) \
QDF_TRACE_FATAL_NO_FL(QDF_MODULE_ID_WMA, params)
#else
#define WMA_LOGA(params ...)
#endif
#define WMA_WILDCARD_PDEV_ID 0x0
#define WMA_HW_DEF_SCAN_MAX_DURATION 30000 /* 30 secs */
#define WMA_EAPOL_SUBTYPE_GET_MIN_LEN 21
#define WMA_EAPOL_INFO_GET_MIN_LEN 23
#define WMA_IS_DHCP_GET_MIN_LEN 38
#define WMA_DHCP_SUBTYPE_GET_MIN_LEN 0x11D
#define WMA_DHCP_INFO_GET_MIN_LEN 50
#define WMA_ARP_SUBTYPE_GET_MIN_LEN 22
#define WMA_IPV4_PROTO_GET_MIN_LEN 24
#define WMA_IPV4_PKT_INFO_GET_MIN_LEN 42
#define WMA_ICMP_SUBTYPE_GET_MIN_LEN 35
#define WMA_IPV6_PROTO_GET_MIN_LEN 21
#define WMA_IPV6_PKT_INFO_GET_MIN_LEN 62
#define WMA_ICMPV6_SUBTYPE_GET_MIN_LEN 55
/* Beacon tx rate */
#define WMA_BEACON_TX_RATE_1_M 10
#define WMA_BEACON_TX_RATE_2_M 20
#define WMA_BEACON_TX_RATE_5_5_M 55
#define WMA_BEACON_TX_RATE_11_M 110
#define WMA_BEACON_TX_RATE_6_M 60
#define WMA_BEACON_TX_RATE_9_M 90
#define WMA_BEACON_TX_RATE_12_M 120
#define WMA_BEACON_TX_RATE_18_M 180
#define WMA_BEACON_TX_RATE_24_M 240
#define WMA_BEACON_TX_RATE_36_M 360
#define WMA_BEACON_TX_RATE_48_M 480
#define WMA_BEACON_TX_RATE_54_M 540
/* Roaming default values
* All time and period values are in milliseconds.
* All rssi values are in dB except for WMA_NOISE_FLOOR_DBM_DEFAULT.
*/
#define WMA_ROAM_SCAN_CHANNEL_SWITCH_TIME (4)
#define WMA_NOISE_FLOOR_DBM_DEFAULT (-96)
#define WMA_RSSI_MIN_VALUE (-128)
#define WMA_RSSI_MAX_VALUE (127)
#define WMA_ROAM_RSSI_DIFF_DEFAULT (5)
#define WMA_ROAM_DWELL_TIME_ACTIVE_DEFAULT (100)
#define WMA_ROAM_DWELL_TIME_PASSIVE_DEFAULT (110)
#define WMA_ROAM_MIN_REST_TIME_DEFAULT (50)
#define WMA_ROAM_MAX_REST_TIME_DEFAULT (500)
#define WMA_INVALID_KEY_IDX 0xff
#define WMA_MAX_RF_CHAINS(x) ((1 << x) - 1)
#define WMA_MIN_RF_CHAINS (1)
#define WMA_MAX_NSS (2)
#define WMA_NOA_IE_SIZE(num_desc) (2 + (13 * (num_desc)))
#define WMA_MAX_NOA_DESCRIPTORS 4
#define WMA_TIM_SUPPORTED_PVB_LENGTH ((HAL_NUM_STA / 8) + 1)
#define WMA_BSS_STATUS_STARTED 0x1
#define WMA_BSS_STATUS_STOPPED 0x2
#define WMA_PEER_ASSOC_CNF_START 0x01
#define WMA_PEER_ASSOC_TIMEOUT SIR_PEER_ASSOC_TIMEOUT
#define WMA_DELETE_STA_RSP_START 0x02
#define WMA_DELETE_STA_TIMEOUT SIR_DELETE_STA_TIMEOUT
#define WMA_DEL_P2P_SELF_STA_RSP_START 0x03
#define WMA_SET_LINK_PEER_RSP 0x04
#define WMA_DELETE_PEER_RSP 0x05
#define WMA_PDEV_SET_HW_MODE_RESP 0x06
#define WMA_PDEV_MAC_CFG_RESP 0x07
/* FW response timeout values in milli seconds */
#define WMA_VDEV_PLCY_MGR_TIMEOUT SIR_VDEV_PLCY_MGR_TIMEOUT
#define WMA_VDEV_HW_MODE_REQUEST_TIMEOUT WMA_VDEV_PLCY_MGR_TIMEOUT
#define WMA_VDEV_DUAL_MAC_CFG_TIMEOUT WMA_VDEV_PLCY_MGR_TIMEOUT
#define WMA_VDEV_PLCY_MGR_WAKE_LOCK_TIMEOUT \
(WMA_VDEV_PLCY_MGR_TIMEOUT + 500)
#define WMA_VDEV_SET_KEY_WAKELOCK_TIMEOUT WAKELOCK_DURATION_RECOMMENDED
#define WMA_TX_Q_RECHECK_TIMER_WAIT 2 /* 2 ms */
#define WMA_MAX_NUM_ARGS 8
#define WMA_SMPS_PARAM_VALUE_S 29
/*
* Setting the Tx Comp Timeout to 1 secs.
* TODO: Need to Revist the Timing
*/
#define WMA_TX_FRAME_COMPLETE_TIMEOUT 1000
#define WMA_TX_FRAME_BUFFER_NO_FREE 0
#define WMA_TX_FRAME_BUFFER_FREE 1
/*
* TODO: Add WMI_CMD_ID_MAX as part of WMI_CMD_ID
* instead of assigning it to the last valid wmi
* cmd+1 to avoid updating this when a command is
* added/deleted.
*/
#define WMI_CMDID_MAX (WMI_TXBF_CMDID + 1)
#define WMA_NLO_FREQ_THRESH 1000 /* in MHz */
#define WMA_MSEC_TO_USEC(msec) (msec * 1000) /* msec to usec */
#define WMA_AUTH_REQ_RECV_WAKE_LOCK_TIMEOUT WAKELOCK_DURATION_RECOMMENDED
#define WMA_ASSOC_REQ_RECV_WAKE_LOCK_DURATION WAKELOCK_DURATION_RECOMMENDED
#define WMA_DEAUTH_RECV_WAKE_LOCK_DURATION WAKELOCK_DURATION_RECOMMENDED
#define WMA_DISASSOC_RECV_WAKE_LOCK_DURATION WAKELOCK_DURATION_RECOMMENDED
#define WMA_ROAM_HO_WAKE_LOCK_DURATION (500) /* in msec */
#define WMA_ROAM_PREAUTH_WAKE_LOCK_DURATION (2 * 1000)
#ifdef FEATURE_WLAN_AUTO_SHUTDOWN
#define WMA_AUTO_SHUTDOWN_WAKE_LOCK_DURATION WAKELOCK_DURATION_RECOMMENDED
#endif
#define WMA_BMISS_EVENT_WAKE_LOCK_DURATION WAKELOCK_DURATION_RECOMMENDED
#define WMA_FW_RSP_EVENT_WAKE_LOCK_DURATION WAKELOCK_DURATION_MAX
#define WMA_TXMIC_LEN 8
#define WMA_RXMIC_LEN 8
#define WMA_IV_KEY_LEN 16
/*
* Length = (2 octets for Index and CTWin/Opp PS) and
* (13 octets for each NOA Descriptors)
*/
#define WMA_P2P_NOA_IE_OPP_PS_SET (0x80)
#define WMA_P2P_NOA_IE_CTWIN_MASK (0x7F)
#define WMA_P2P_IE_ID 0xdd
#define WMA_P2P_WFA_OUI { 0x50, 0x6f, 0x9a }
#define WMA_P2P_WFA_VER 0x09 /* ver 1.0 */
/* P2P Sub element definitions (according to table 5 of Wifi's P2P spec) */
#define WMA_P2P_SUB_ELEMENT_STATUS 0
#define WMA_P2P_SUB_ELEMENT_MINOR_REASON 1
#define WMA_P2P_SUB_ELEMENT_CAPABILITY 2
#define WMA_P2P_SUB_ELEMENT_DEVICE_ID 3
#define WMA_P2P_SUB_ELEMENT_GO_INTENT 4
#define WMA_P2P_SUB_ELEMENT_CONFIGURATION_TIMEOUT 5
#define WMA_P2P_SUB_ELEMENT_LISTEN_CHANNEL 6
#define WMA_P2P_SUB_ELEMENT_GROUP_BSSID 7
#define WMA_P2P_SUB_ELEMENT_EXTENDED_LISTEN_TIMING 8
#define WMA_P2P_SUB_ELEMENT_INTENDED_INTERFACE_ADDR 9
#define WMA_P2P_SUB_ELEMENT_MANAGEABILITY 10
#define WMA_P2P_SUB_ELEMENT_CHANNEL_LIST 11
#define WMA_P2P_SUB_ELEMENT_NOA 12
#define WMA_P2P_SUB_ELEMENT_DEVICE_INFO 13
#define WMA_P2P_SUB_ELEMENT_GROUP_INFO 14
#define WMA_P2P_SUB_ELEMENT_GROUP_ID 15
#define WMA_P2P_SUB_ELEMENT_INTERFACE 16
#define WMA_P2P_SUB_ELEMENT_OP_CHANNEL 17
#define WMA_P2P_SUB_ELEMENT_INVITATION_FLAGS 18
#define WMA_P2P_SUB_ELEMENT_VENDOR 221
/* Macros for handling unaligned memory accesses */
#define P2PIE_PUT_LE16(a, val) \
do { \
(a)[1] = ((uint16_t) (val)) >> 8; \
(a)[0] = ((uint16_t) (val)) & 0xff; \
} while (0)
#define P2PIE_PUT_LE32(a, val) \
do { \
(a)[3] = (uint8_t) ((((uint32_t) (val)) >> 24) & 0xff); \
(a)[2] = (uint8_t) ((((uint32_t) (val)) >> 16) & 0xff); \
(a)[1] = (uint8_t) ((((uint32_t) (val)) >> 8) & 0xff); \
(a)[0] = (uint8_t) (((uint32_t) (val)) & 0xff); \
} while (0)
#define WMA_DEFAULT_MAX_PSPOLL_BEFORE_WAKE 1
#define WMA_VHT_PPS_PAID_MATCH 1
#define WMA_VHT_PPS_GID_MATCH 2
#define WMA_VHT_PPS_DELIM_CRC_FAIL 3
#define WMA_DEFAULT_HW_MODE_INDEX 0xFFFF
#define TWO_THIRD (2/3)
/**
* WMA hardware mode list bit-mask definitions.
* Bits 4:0, 31:29 are unused.
*
* The below definitions are added corresponding to WMI DBS HW mode
* list to make it independent of firmware changes for WMI definitions.
* Currently these definitions have dependency with BIT positions of
* the existing WMI macros. Thus, if the BIT positions are changed for
* WMI macros, then these macros' BIT definitions are also need to be
* changed.
*/
#define WMA_HW_MODE_MAC0_TX_STREAMS_BITPOS (28)
#define WMA_HW_MODE_MAC0_RX_STREAMS_BITPOS (24)
#define WMA_HW_MODE_MAC1_TX_STREAMS_BITPOS (20)
#define WMA_HW_MODE_MAC1_RX_STREAMS_BITPOS (16)
#define WMA_HW_MODE_MAC0_BANDWIDTH_BITPOS (12)
#define WMA_HW_MODE_MAC1_BANDWIDTH_BITPOS (8)
#define WMA_HW_MODE_DBS_MODE_BITPOS (7)
#define WMA_HW_MODE_AGILE_DFS_MODE_BITPOS (6)
#define WMA_HW_MODE_SBS_MODE_BITPOS (5)
#define WMA_HW_MODE_MAC0_TX_STREAMS_MASK \
(0xf << WMA_HW_MODE_MAC0_TX_STREAMS_BITPOS)
#define WMA_HW_MODE_MAC0_RX_STREAMS_MASK \
(0xf << WMA_HW_MODE_MAC0_RX_STREAMS_BITPOS)
#define WMA_HW_MODE_MAC1_TX_STREAMS_MASK \
(0xf << WMA_HW_MODE_MAC1_TX_STREAMS_BITPOS)
#define WMA_HW_MODE_MAC1_RX_STREAMS_MASK \
(0xf << WMA_HW_MODE_MAC1_RX_STREAMS_BITPOS)
#define WMA_HW_MODE_MAC0_BANDWIDTH_MASK \
(0xf << WMA_HW_MODE_MAC0_BANDWIDTH_BITPOS)
#define WMA_HW_MODE_MAC1_BANDWIDTH_MASK \
(0xf << WMA_HW_MODE_MAC1_BANDWIDTH_BITPOS)
#define WMA_HW_MODE_DBS_MODE_MASK \
(0x1 << WMA_HW_MODE_DBS_MODE_BITPOS)
#define WMA_HW_MODE_AGILE_DFS_MODE_MASK \
(0x1 << WMA_HW_MODE_AGILE_DFS_MODE_BITPOS)
#define WMA_HW_MODE_SBS_MODE_MASK \
(0x1 << WMA_HW_MODE_SBS_MODE_BITPOS)
#define WMA_HW_MODE_MAC0_TX_STREAMS_SET(hw_mode, value) \
WMI_SET_BITS(hw_mode, WMA_HW_MODE_MAC0_TX_STREAMS_BITPOS, 4, value)
#define WMA_HW_MODE_MAC0_RX_STREAMS_SET(hw_mode, value) \
WMI_SET_BITS(hw_mode, WMA_HW_MODE_MAC0_RX_STREAMS_BITPOS, 4, value)
#define WMA_HW_MODE_MAC1_TX_STREAMS_SET(hw_mode, value) \
WMI_SET_BITS(hw_mode, WMA_HW_MODE_MAC1_TX_STREAMS_BITPOS, 4, value)
#define WMA_HW_MODE_MAC1_RX_STREAMS_SET(hw_mode, value) \
WMI_SET_BITS(hw_mode, WMA_HW_MODE_MAC1_RX_STREAMS_BITPOS, 4, value)
#define WMA_HW_MODE_MAC0_BANDWIDTH_SET(hw_mode, value) \
WMI_SET_BITS(hw_mode, WMA_HW_MODE_MAC0_BANDWIDTH_BITPOS, 4, value)
#define WMA_HW_MODE_MAC1_BANDWIDTH_SET(hw_mode, value) \
WMI_SET_BITS(hw_mode, WMA_HW_MODE_MAC1_BANDWIDTH_BITPOS, 4, value)
#define WMA_HW_MODE_DBS_MODE_SET(hw_mode, value) \
WMI_SET_BITS(hw_mode, WMA_HW_MODE_DBS_MODE_BITPOS, 1, value)
#define WMA_HW_MODE_AGILE_DFS_SET(hw_mode, value) \
WMI_SET_BITS(hw_mode, WMA_HW_MODE_AGILE_DFS_MODE_BITPOS, 1, value)
#define WMA_HW_MODE_SBS_MODE_SET(hw_mode, value) \
WMI_SET_BITS(hw_mode, WMA_HW_MODE_SBS_MODE_BITPOS, 1, value)
#define WMA_HW_MODE_MAC0_TX_STREAMS_GET(hw_mode) \
((hw_mode & WMA_HW_MODE_MAC0_TX_STREAMS_MASK) >> \
WMA_HW_MODE_MAC0_TX_STREAMS_BITPOS)
#define WMA_HW_MODE_MAC0_RX_STREAMS_GET(hw_mode) \
((hw_mode & WMA_HW_MODE_MAC0_RX_STREAMS_MASK) >> \
WMA_HW_MODE_MAC0_RX_STREAMS_BITPOS)
#define WMA_HW_MODE_MAC1_TX_STREAMS_GET(hw_mode) \
((hw_mode & WMA_HW_MODE_MAC1_TX_STREAMS_MASK) >> \
WMA_HW_MODE_MAC1_TX_STREAMS_BITPOS)
#define WMA_HW_MODE_MAC1_RX_STREAMS_GET(hw_mode) \
((hw_mode & WMA_HW_MODE_MAC1_RX_STREAMS_MASK) >> \
WMA_HW_MODE_MAC1_RX_STREAMS_BITPOS)
#define WMA_HW_MODE_MAC0_BANDWIDTH_GET(hw_mode) \
((hw_mode & WMA_HW_MODE_MAC0_BANDWIDTH_MASK) >> \
WMA_HW_MODE_MAC0_BANDWIDTH_BITPOS)
#define WMA_HW_MODE_MAC1_BANDWIDTH_GET(hw_mode) \
((hw_mode & WMA_HW_MODE_MAC1_BANDWIDTH_MASK) >> \
WMA_HW_MODE_MAC1_BANDWIDTH_BITPOS)
#define WMA_HW_MODE_DBS_MODE_GET(hw_mode) \
((hw_mode & WMA_HW_MODE_DBS_MODE_MASK) >> \
WMA_HW_MODE_DBS_MODE_BITPOS)
#define WMA_HW_MODE_AGILE_DFS_GET(hw_mode) \
((hw_mode & WMA_HW_MODE_AGILE_DFS_MODE_MASK) >> \
WMA_HW_MODE_AGILE_DFS_MODE_BITPOS)
#define WMA_HW_MODE_SBS_MODE_GET(hw_mode) \
((hw_mode & WMA_HW_MODE_SBS_MODE_MASK) >> \
WMA_HW_MODE_SBS_MODE_BITPOS)
/*
* Extract 2G or 5G tx/rx chainmask
* format of txrx_chainmask (from wmi_service_ready_event_fixed_param):
* [7:0] - 2G band tx chain mask
* [15:8] - 2G band rx chain mask
* [23:16] - 5G band tx chain mask
* [31:24] - 5G band rx chain mask
*/
#define EXTRACT_TX_CHAIN_MASK_2G(chainmask) ((chainmask) & 0xFF)
#define EXTRACT_RX_CHAIN_MASK_2G(chainmask) (((chainmask) >> 8) & 0xFF)
#define EXTRACT_TX_CHAIN_MASK_5G(chainmask) (((chainmask) >> 16) & 0xFF)
#define EXTRACT_RX_CHAIN_MASK_5G(chainmask) (((chainmask) >> 24) & 0xFF)
/*
* PROBE_REQ_TX_DELAY
* param to specify probe request Tx delay for scans triggered on this VDEV
*/
#define PROBE_REQ_TX_DELAY 10
/* PROBE_REQ_TX_TIME_GAP
* param to specify the time gap between each set of probe request transmission.
* The number of probe requests in each set depends on the ssid_list and,
* bssid_list in the scan request. This parameter will get applied only,
* for the scans triggered on this VDEV.
*/
#define PROBE_REQ_TX_TIME_GAP 20
typedef void (*txFailIndCallback)(uint8_t *peer_mac, uint8_t seqNo);
/**
* enum wma_rx_exec_ctx - wma rx execution context
* @WMA_RX_WORK_CTX: work queue context execution
* @WMA_RX_TASKLET_CTX: tasklet context execution
* @WMA_RX_SERIALIZER_CTX: MC thread context execution
*
*/
enum wma_rx_exec_ctx {
WMA_RX_WORK_CTX = WMI_RX_WORK_CTX,
WMA_RX_TASKLET_CTX = WMI_RX_TASKLET_CTX,
WMA_RX_SERIALIZER_CTX = WMI_RX_SERIALIZER_CTX,
};
/**
* struct beacon_info - structure to store beacon template
* @buf: skb ptr
* @len: length
* @dma_mapped: is it dma mapped or not
* @tim_ie_offset: TIM IE offset
* @dtim_count: DTIM count
* @seq_no: sequence no
* @noa_sub_ie: NOA sub IE
* @noa_sub_ie_len: NOA sub IE length
* @noa_ie: NOA IE
* @p2p_ie_offset: p2p IE offset
* @lock: lock
*/
struct beacon_info {
qdf_nbuf_t buf;
uint32_t len;
uint8_t dma_mapped;
uint32_t tim_ie_offset;
uint8_t dtim_count;
uint16_t seq_no;
uint8_t noa_sub_ie[2 + WMA_NOA_IE_SIZE(WMA_MAX_NOA_DESCRIPTORS)];
uint16_t noa_sub_ie_len;
uint8_t *noa_ie;
uint16_t p2p_ie_offset;
qdf_spinlock_t lock;
};
/**
* struct beacon_tim_ie - structure to store TIM IE of beacon
* @tim_ie: tim ie
* @tim_len: tim ie length
* @dtim_count: dtim count
* @dtim_period: dtim period
* @tim_bitctl: tim bit control
* @tim_bitmap: tim bitmap
*/
struct beacon_tim_ie {
uint8_t tim_ie;
uint8_t tim_len;
uint8_t dtim_count;
uint8_t dtim_period;
uint8_t tim_bitctl;
uint8_t tim_bitmap[1];
} __ATTRIB_PACK;
/**
* struct pps - packet power save parameter
* @paid_match_enable: paid match enable
* @gid_match_enable: gid match enable
* @tim_clear: time clear
* @dtim_clear: dtim clear
* @eof_delim: eof delim
* @mac_match: mac match
* @delim_fail: delim fail
* @nsts_zero: nsts zero
* @rssi_chk: RSSI check
* @ebt_5g: ebt 5GHz
*/
struct pps {
bool paid_match_enable;
bool gid_match_enable;
bool tim_clear;
bool dtim_clear;
bool eof_delim;
bool mac_match;
bool delim_fail;
bool nsts_zero;
bool rssi_chk;
bool ebt_5g;
};
/**
* struct qpower_params - qpower related parameters
* @max_ps_poll_cnt: max ps poll count
* @max_tx_before_wake: max tx before wake
* @spec_ps_poll_wake_interval: ps poll wake interval
* @max_spec_nodata_ps_poll: no data ps poll
*/
struct qpower_params {
uint32_t max_ps_poll_cnt;
uint32_t max_tx_before_wake;
uint32_t spec_ps_poll_wake_interval;
uint32_t max_spec_nodata_ps_poll;
};
/**
* struct gtx_config_t - GTX config
* @gtxRTMask: for HT and VHT rate masks
* @gtxUsrcfg: host request for GTX mask
* @gtxPERThreshold: PER Threshold (default: 10%)
* @gtxPERMargin: PER margin (default: 2%)
* @gtxTPCstep: TCP step (default: 1)
* @gtxTPCMin: TCP min (default: 5)
* @gtxBWMask: BW mask (20/40/80/160 Mhz)
*/
typedef struct {
uint32_t gtxRTMask[2];
uint32_t gtxUsrcfg;
uint32_t gtxPERThreshold;
uint32_t gtxPERMargin;
uint32_t gtxTPCstep;
uint32_t gtxTPCMin;
uint32_t gtxBWMask;
} gtx_config_t;
/**
* struct pdev_cli_config_t - store pdev parameters
* @ani_enable: ANI is enabled/disable on target
* @ani_poll_len: store ANI polling period
* @ani_listen_len: store ANI listening period
* @ani_ofdm_level: store ANI OFDM immunity level
* @ani_cck_level: store ANI CCK immunity level
* @cwmenable: Dynamic bw is enable/disable in fw
* @txchainmask: tx chain mask
* @rxchainmask: rx chain mask
* @txpow2g: tx power limit for 2GHz
* @txpow5g: tx power limit for 5GHz
*
* This structure stores pdev parameters.
* Some of these parameters are set in fw and some
* parameters are only maintained in host.
*/
typedef struct {
uint32_t ani_enable;
uint32_t ani_poll_len;
uint32_t ani_listen_len;
uint32_t ani_ofdm_level;
uint32_t ani_cck_level;
uint32_t cwmenable;
uint32_t cts_cbw;
uint32_t txchainmask;
uint32_t rxchainmask;
uint32_t txpow2g;
uint32_t txpow5g;
} pdev_cli_config_t;
/**
* struct vdev_cli_config_t - store vdev parameters
* @nss: nss width
* @ldpc: is ldpc is enable/disable
* @tx_stbc: TX STBC is enable/disable
* @rx_stbc: RX STBC is enable/disable
* @shortgi: short gi is enable/disable
* @rtscts_en: RTS/CTS is enable/disable
* @chwidth: channel width
* @tx_rate: tx rate
* @ampdu: ampdu size
* @amsdu: amsdu size
* @erx_adjust: enable/disable early rx enable
* @erx_bmiss_num: target bmiss number per sample
* @erx_bmiss_cycle: sample cycle
* @erx_slop_step: slop_step value
* @erx_init_slop: init slop
* @erx_adj_pause: pause adjust enable/disable
* @erx_dri_sample: enable/disable drift sample
* @pps_params: packet power save parameters
* @qpower_params: qpower parameters
* @gtx_info: GTX offload info
* @dcm: DCM enable/disable
* @range_ext: HE range extension enable/disable
*
* This structure stores vdev parameters.
* Some of these parameters are set in fw and some
* parameters are only maintained in host.
*/
typedef struct {
uint32_t nss;
uint32_t ldpc;
uint32_t tx_stbc;
uint32_t rx_stbc;
uint32_t shortgi;
uint32_t rtscts_en;
uint32_t chwidth;
uint32_t tx_rate;
uint32_t ampdu;
uint32_t amsdu;
uint32_t erx_adjust;
uint32_t erx_bmiss_num;
uint32_t erx_bmiss_cycle;
uint32_t erx_slop_step;
uint32_t erx_init_slop;
uint32_t erx_adj_pause;
uint32_t erx_dri_sample;
struct pps pps_params;
struct qpower_params qpower_params;
gtx_config_t gtx_info;
#ifdef WLAN_FEATURE_11AX
uint8_t dcm;
uint8_t range_ext;
#endif
} vdev_cli_config_t;
/**
* struct wma_version_info - Store wmi version info
* @major: wmi major version
* @minor: wmi minor version
* @revision: wmi revision number
*/
struct wma_version_info {
u_int32_t major;
u_int32_t minor;
u_int32_t revision;
};
#ifdef WLAN_FEATURE_11W
#define CMAC_IPN_LEN (6)
#define WMA_IGTK_KEY_INDEX_4 (4)
#define WMA_IGTK_KEY_INDEX_5 (5)
/**
* struct wma_igtk_ipn_t - GTK IPN info
* @ipn: IPN info
*/
typedef struct {
uint8_t ipn[CMAC_IPN_LEN];
} wma_igtk_ipn_t;
/**
* struct wma_igtk_key_t - GTK key
* @key_length: key length
* @key: key
* @key_id: key id
* @key_cipher: key type
*/
typedef struct {
uint16_t key_length;
uint8_t key[CSR_AES_GMAC_256_KEY_LEN];
/* IPN is maintained per iGTK keyID
* 0th index for iGTK keyID = 4;
* 1st index for iGTK KeyID = 5
*/
wma_igtk_ipn_t key_id[2];
uint32_t key_cipher;
} wma_igtk_key_t;
#endif
struct roam_synch_frame_ind {
uint32_t bcn_probe_rsp_len;
uint8_t *bcn_probe_rsp;
uint8_t is_beacon;
uint32_t reassoc_req_len;
uint8_t *reassoc_req;
uint32_t reassoc_rsp_len;
uint8_t *reassoc_rsp;
};
/* Max number of invalid peer entries */
#define INVALID_PEER_MAX_NUM 5
/**
* struct wma_invalid_peer_params - stores invalid peer entries
* @rx_macaddr: store mac addr of invalid peer
*/
struct wma_invalid_peer_params {
uint8_t rx_macaddr[QDF_MAC_ADDR_SIZE];
};
/**
* struct wma_txrx_node - txrx node
* @vdev: pointer to vdev object
* @beacon: beacon info
* @config: per vdev config parameters
* @scan_info: scan info
* @type: type
* @sub_type: sub type
* @nlo_match_evt_received: is nlo match event received or not
* @pno_in_progress: is pno in progress or not
* @plm_in_progress: is plm in progress or not
* @beaconInterval: beacon interval
* @llbCoexist: 11b coexist
* @shortSlotTimeSupported: is short slot time supported or not
* @dtimPeriod: DTIM period
* @mhz: channel frequency in KHz
* @chan_width: channel bandwidth
* @vdev_up: is vdev up or not
* @tsfadjust: TSF adjust
* @addBssStaContext: add bss context
* @aid: association id
* @rmfEnabled: Robust Management Frame (RMF) enabled/disabled
* @key: GTK key
* @uapsd_cached_val: uapsd cached value
* @stats_rsp: stats response
* @del_staself_req: delete sta self request
* @bss_status: bss status
* @nss: nss value
* @is_channel_switch: is channel switch
* @pause_bitmap: pause bitmap
* @nwType: network type (802.11a/b/g/n/ac)
* @staKeyParams: sta key parameters
* @ps_enabled: is powersave enable/disable
* @peer_count: peer count
* @roam_synch_in_progress: flag is in progress or not
* @plink_status_req: link status request
* @psnr_req: snr request
* @delay_before_vdev_stop: delay
* @tx_streams: number of tx streams can be used by the vdev
* @mac_id: the mac on which vdev is on
* @wep_default_key_idx: wep default index for group key
* @arp_offload_req: cached arp offload request
* @ns_offload_req: cached ns offload request
* @rcpi_req: rcpi request
* @in_bmps: Whether bmps for this interface has been enabled
* @vdev_set_key_wakelock: wakelock to protect vdev set key op with firmware
* @vdev_set_key_runtime_wakelock: runtime pm wakelock for set key
* @ch_freq: channel frequency
* @roam_scan_stats_req: cached roam scan stats request
* @wma_invalid_peer_params: structure storing invalid peer params
* @invalid_peer_idx: invalid peer index
* It stores parameters per vdev in wma.
*/
struct wma_txrx_node {
struct wlan_objmgr_vdev *vdev;
struct beacon_info *beacon;
vdev_cli_config_t config;
uint32_t type;
uint32_t sub_type;
#ifdef FEATURE_WLAN_ESE
bool plm_in_progress;
#endif
tSirMacBeaconInterval beaconInterval;
uint8_t llbCoexist;
uint8_t shortSlotTimeSupported;
uint8_t dtimPeriod;
A_UINT32 mhz;
enum phy_ch_width chan_width;
bool vdev_active;
uint64_t tsfadjust;
tAddStaParams *addBssStaContext;
uint8_t aid;
uint8_t rmfEnabled;
#ifdef WLAN_FEATURE_11W
wma_igtk_key_t key;
#endif /* WLAN_FEATURE_11W */
uint32_t uapsd_cached_val;
void *del_staself_req;
bool is_del_sta_defered;
qdf_atomic_t bss_status;
enum tx_rate_info rate_flags;
uint8_t nss;
uint16_t pause_bitmap;
uint32_t nwType;
tSetStaKeyParams *staKeyParams;
uint32_t peer_count;
bool roam_synch_in_progress;
void *plink_status_req;
void *psnr_req;
uint8_t delay_before_vdev_stop;
#ifdef FEATURE_WLAN_EXTSCAN
bool extscan_in_progress;
#endif
uint32_t tx_streams;
uint32_t mac_id;
bool roaming_in_progress;
int32_t roam_synch_delay;
uint8_t wep_default_key_idx;
struct sme_rcpi_req *rcpi_req;
bool in_bmps;
struct beacon_filter_param beacon_filter;
bool beacon_filter_enabled;
qdf_wake_lock_t vdev_set_key_wakelock;
qdf_runtime_lock_t vdev_set_key_runtime_wakelock;
struct roam_synch_frame_ind roam_synch_frame_ind;
bool is_waiting_for_key;
uint32_t ch_freq;
struct sir_roam_scan_stats *roam_scan_stats_req;
struct wma_invalid_peer_params invalid_peers[INVALID_PEER_MAX_NUM];
uint8_t invalid_peer_idx;
};
/**
* struct ibss_power_save_params - IBSS power save parameters
* @atimWindowLength: ATIM window length
* @isPowerSaveAllowed: is power save allowed
* @isPowerCollapseAllowed: is power collapsed allowed
* @isAwakeonTxRxEnabled: is awake on tx/rx enabled
* @inactivityCount: inactivity count
* @txSPEndInactivityTime: tx SP end inactivity time
* @ibssPsWarmupTime: IBSS power save warm up time
* @ibssPs1RxChainInAtimEnable: IBSS power save rx chain in ATIM enable
*/
typedef struct {
uint32_t atimWindowLength;
uint32_t isPowerSaveAllowed;
uint32_t isPowerCollapseAllowed;
uint32_t isAwakeonTxRxEnabled;
uint32_t inactivityCount;
uint32_t txSPEndInactivityTime;
uint32_t ibssPsWarmupTime;
uint32_t ibssPs1RxChainInAtimEnable;
} ibss_power_save_params;
/**
* struct mac_ss_bw_info - hw_mode_list PHY/MAC params for each MAC
* @mac_tx_stream: Max TX stream
* @mac_rx_stream: Max RX stream
* @mac_bw: Max bandwidth
*/
struct mac_ss_bw_info {
uint32_t mac_tx_stream;
uint32_t mac_rx_stream;
uint32_t mac_bw;
};
/**
* struct wma_ini_config - Structure to hold wma ini configuration
* @max_no_of_peers: Max Number of supported
*
* Placeholder for WMA ini parameters.
*/
struct wma_ini_config {
uint8_t max_no_of_peers;
};
/**
* struct wma_valid_channels - Channel details part of WMI_SCAN_CHAN_LIST_CMDID
* @num_channels: Number of channels
* @ch_freq_list: Channel Frequency list
*/
struct wma_valid_channels {
uint8_t num_channels;
uint32_t ch_freq_list[MAX_NUM_CHAN];
};
#ifdef FEATURE_WLM_STATS
/**
* struct wma_wlm_stats_data - Data required to be used to send WLM req
* @wlm_stats_max_size: Buffer size provided by userspace
* @wlm_stats_cookie: Cookie to retrieve WLM req data
* @wlm_stats_callback: Callback to be used to send WLM response
*/
struct wma_wlm_stats_data {
uint32_t wlm_stats_max_size;
void *wlm_stats_cookie;
wma_wlm_stats_cb wlm_stats_callback;
};
#endif
/**
* struct t_wma_handle - wma context
* @wmi_handle: wmi handle
* @cds_context: cds handle
* @mac_context: mac context
* @psoc: psoc context
* @pdev: physical device global object
* @target_suspend: target suspend event
* @recovery_event: wma FW recovery event
* @max_station: max stations
* @max_bssid: max bssid
* @myaddr: current mac address
* @hwaddr: mac address from EEPROM
* @lpss_support: LPSS feature is supported in target or not
* @wmi_ready: wmi status flag
* @wlan_init_status: wlan init status
* @qdf_dev: qdf device
* @wmi_service_bitmap: wmi services bitmap received from Target
* @wmi_service_ext_bitmap: extended wmi services bitmap received from Target
* @tx_frm_download_comp_cb: Tx Frame Compl Cb registered by umac
* @tx_frm_download_comp_event: Event to wait for tx download completion
* @tx_queue_empty_event: Dummy event to wait for draining MSDUs left
* in hardware tx queue and before requesting VDEV_STOP. Nobody will
* set this and wait will timeout, and code will poll the pending tx
* descriptors number to be zero.
* @umac_ota_ack_cb: Ack Complete Callback registered by umac
* @umac_data_ota_ack_cb: ack complete callback
* @last_umac_data_ota_timestamp: timestamp when OTA of last umac data
* was done
* @last_umac_data_nbuf: cache nbuf ptr for the last umac data buf
* @needShutdown: is shutdown needed or not
* @tgt_cfg_update_cb: configuration update callback
* @reg_cap: regulatory capablities
* @scan_id: scan id
* @interfaces: txrx nodes(per vdev)
* @pdevconfig: pdev related configrations
* @wma_hold_req_queue: Queue use to serialize requests to firmware
* @wma_hold_req_q_lock: Mutex for @wma_hold_req_queue
* @vht_supp_mcs: VHT supported MCS
* @is_fw_assert: is fw asserted
* @ack_work_ctx: Context for deferred processing of TX ACK
* @powersave_mode: power save mode
* @pGetRssiReq: get RSSI request
* @get_one_peer_info: When a "get peer info" request is active, is
* the request for a single peer?
* @peer_macaddr: When @get_one_peer_info is true, the peer's mac address
* @thermal_mgmt_info: Thermal mitigation related info
* @enable_mc_list: To Check if Multicast list filtering is enabled in FW
* @ibss_started: is IBSS started or not
* @ibsskey_info: IBSS key info
* @hddTxFailCb: tx fail indication callback
* @extscan_wake_lock: extscan wake lock
* @wow_wake_lock: wow wake lock
* @wow_auth_req_wl: wow wake lock for auth req
* @wow_assoc_req_wl: wow wake lock for assoc req
* @wow_deauth_rec_wl: wow wake lock for deauth req
* @wow_disassoc_rec_wl: wow wake lock for disassoc req
* @wow_ap_assoc_lost_wl: wow wake lock for assoc lost req
* @wow_auto_shutdown_wl: wow wake lock for shutdown req
* @roam_ho_wl: wake lock for roam handoff req
* @wow_nack: wow negative ack flag
* @is_wow_bus_suspended: is wow bus suspended flag
* @suitable_ap_hb_failure: better ap found
* @suitable_ap_hb_failure_rssi: RSSI when suitable_ap_hb_failure
* triggered for later usage to report RSSI at beacon miss scenario
* @wma_ibss_power_save_params: IBSS Power Save config Parameters
* @IsRArateLimitEnabled: RA rate limiti s enabled or not
* @RArateLimitInterval: RA rate limit interval
* @is_lpass_enabled: Flag to indicate if LPASS feature is enabled or not
* @staMaxLIModDtim: station max listen interval
* @staModDtim: station mode DTIM
* @staDynamicDtim: station dynamic DTIM
* @hw_bd_id: hardware board id
* @hw_bd_info: hardware board info
* @miracast_value: miracast value
* @log_completion_timer: log completion timer
* @num_dbs_hw_modes: Number of HW modes supported by the FW
* @hw_mode: DBS HW mode list
* @old_hw_mode_index: Previous configured HW mode index
* @new_hw_mode_index: Current configured HW mode index
* @peer_authorized_cb: peer authorized hdd callback
* @ocb_config_req: OCB request context
* @self_gen_frm_pwr: Self-generated frame power
* @tx_chain_mask_cck: Is the CCK tx chain mask enabled
* @service_ready_ext_timer: Timer for service ready extended. Note
* this is a a timer instead of wait event because on receiving the
* service ready event, we will be waiting on the MC thread for the
* service extended ready event which is also processed in MC
* thread. This leads to MC thread being stuck. Alternative was to
* process these events in tasklet/workqueue context. But, this
* leads to race conditions when the events are processed in two
* different context. So, processing ready event and extended ready
* event in the serialized MC thread context with a timer.
* @csr_roam_synch_cb: CSR callback for firmware Roam Sync events
* @pe_roam_synch_cb: pe callback for firmware Roam Sync events
* @csr_roam_auth_event_handle_cb: CSR callback for target authentication
* offload event.
* @wmi_cmd_rsp_wake_lock: wmi command response wake lock
* @wmi_cmd_rsp_runtime_lock: wmi command response bus lock
* @active_uc_apf_mode: Setting that determines how APF is applied in
* active mode for uc packets
* @active_mc_bc_apf_mode: Setting that determines how APF is applied in
* active mode for MC/BC packets
* @ini_config: Initial configuration from upper layer
* @saved_chan: saved channel list sent as part of
* WMI_SCAN_CHAN_LIST_CMDID
* @nan_datapath_enabled: Is NAN datapath support enabled in firmware?
* @fw_timeout_crash: Should firmware be reset upon response timeout?
* @sub_20_support: Does target support sub-20MHz bandwidth (aka
* half-rate and quarter-rate)?
* @is_dfs_offloaded: Is dfs and cac timer offloaded?
* @wma_mgmt_tx_packetdump_cb: Callback function for TX packet dump
* @wma_mgmt_rx_packetdump_cb: Callback function for RX packet dump
* @rcpi_enabled: Is RCPI enabled?
* @link_stats_results: Structure for handing link stats from firmware
* @tx_fail_cnt: Number of TX failures
* @wlm_data: Data required for WLM req and resp handling
* @he_cap: 802.11ax capabilities
* @bandcapability: band capability configured through ini
* @tx_bfee_8ss_enabled: Is Tx Beamformee support for 8x8 enabled?
* @in_imps: Is device in Idle Mode Power Save?
* @dynamic_nss_chains_update: per vdev nss, chains update
* @ito_repeat_count: Indicates ito repeated count
* @wma_fw_time_sync_timer: timer used for firmware time sync
* @critical_events_in_flight: number of suspend-preventing events
* in flight
* * @fw_therm_throt_support: FW Supports thermal throttling?
*
* This structure is the global wma context. It contains global wma
* module parameters and handles of other modules.
*/
typedef struct {
void *wmi_handle;
void *cds_context;
struct mac_context *mac_context;
struct wlan_objmgr_psoc *psoc;
struct wlan_objmgr_pdev *pdev;
qdf_event_t target_suspend;
qdf_event_t runtime_suspend;
qdf_event_t recovery_event;
uint16_t max_station;
uint16_t max_bssid;
uint8_t myaddr[QDF_MAC_ADDR_SIZE];
uint8_t hwaddr[QDF_MAC_ADDR_SIZE];
#ifdef WLAN_FEATURE_LPSS
uint8_t lpss_support;
#endif
uint8_t ap_arpns_support;
bool wmi_ready;
uint32_t wlan_init_status;
qdf_device_t qdf_dev;
uint32_t wmi_service_bitmap[WMI_SERVICE_BM_SIZE];
uint32_t wmi_service_ext_bitmap[WMI_SERVICE_SEGMENT_BM_SIZE32];
wma_tx_dwnld_comp_callback tx_frm_download_comp_cb;
qdf_event_t tx_frm_download_comp_event;
qdf_event_t tx_queue_empty_event;
wma_tx_ota_comp_callback umac_data_ota_ack_cb;
unsigned long last_umac_data_ota_timestamp;
qdf_nbuf_t last_umac_data_nbuf;
bool needShutdown;
wma_tgt_cfg_cb tgt_cfg_update_cb;
HAL_REG_CAPABILITIES reg_cap;
uint32_t scan_id;
struct wma_txrx_node *interfaces;
pdev_cli_config_t pdevconfig;
qdf_list_t wma_hold_req_queue;
qdf_spinlock_t wma_hold_req_q_lock;
uint32_t vht_supp_mcs;
uint8_t is_fw_assert;
struct wma_tx_ack_work_ctx *ack_work_ctx;
uint8_t powersave_mode;
void *pGetRssiReq;
bool get_one_peer_info;
struct qdf_mac_addr peer_macaddr;
t_thermal_mgmt thermal_mgmt_info;
bool enable_mc_list;
uint8_t ibss_started;
tSetBssKeyParams ibsskey_info;
txFailIndCallback hddTxFailCb;
#ifdef FEATURE_WLAN_EXTSCAN
qdf_wake_lock_t extscan_wake_lock;
#endif
qdf_wake_lock_t wow_wake_lock;
qdf_wake_lock_t wow_auth_req_wl;
qdf_wake_lock_t wow_assoc_req_wl;
qdf_wake_lock_t wow_deauth_rec_wl;
qdf_wake_lock_t wow_disassoc_rec_wl;
qdf_wake_lock_t wow_ap_assoc_lost_wl;
qdf_wake_lock_t wow_auto_shutdown_wl;
qdf_wake_lock_t roam_ho_wl;
qdf_wake_lock_t roam_preauth_wl;
int wow_nack;
qdf_atomic_t is_wow_bus_suspended;
bool suitable_ap_hb_failure;
uint32_t suitable_ap_hb_failure_rssi;
ibss_power_save_params wma_ibss_power_save_params;
#ifdef WLAN_FEATURE_LPSS
bool is_lpass_enabled;
#endif
uint8_t staMaxLIModDtim;
uint8_t staModDtim;
uint8_t staDynamicDtim;
uint32_t hw_bd_id;
uint32_t hw_bd_info[HW_BD_INFO_SIZE];
uint32_t miracast_value;
qdf_mc_timer_t log_completion_timer;
uint32_t num_dbs_hw_modes;
struct dbs_hw_mode_info hw_mode;
uint32_t old_hw_mode_index;
uint32_t new_hw_mode_index;
wma_peer_authorized_fp peer_authorized_cb;
struct sir_ocb_config *ocb_config_req;
uint16_t self_gen_frm_pwr;
bool tx_chain_mask_cck;
qdf_mc_timer_t service_ready_ext_timer;
QDF_STATUS (*csr_roam_synch_cb)(struct mac_context *mac,
struct roam_offload_synch_ind *roam_synch_data,
struct bss_description *bss_desc_ptr,
enum sir_roam_op_code reason);
QDF_STATUS (*csr_roam_auth_event_handle_cb)(struct mac_context *mac,
uint8_t vdev_id,
struct qdf_mac_addr bssid);
QDF_STATUS (*pe_roam_synch_cb)(struct mac_context *mac,
struct roam_offload_synch_ind *roam_synch_data,
struct bss_description *bss_desc_ptr,
enum sir_roam_op_code reason);
QDF_STATUS (*pe_disconnect_cb) (struct mac_context *mac,
uint8_t vdev_id,
uint8_t *deauth_disassoc_frame,
uint16_t deauth_disassoc_frame_len);
qdf_wake_lock_t wmi_cmd_rsp_wake_lock;
qdf_runtime_lock_t wmi_cmd_rsp_runtime_lock;
qdf_runtime_lock_t sap_prevent_runtime_pm_lock;
enum active_apf_mode active_uc_apf_mode;
enum active_apf_mode active_mc_bc_apf_mode;
struct wma_ini_config ini_config;
struct wma_valid_channels saved_chan;
bool nan_datapath_enabled;
bool fw_timeout_crash;
bool sub_20_support;
bool is_dfs_offloaded;
ol_txrx_pktdump_cb wma_mgmt_tx_packetdump_cb;
ol_txrx_pktdump_cb wma_mgmt_rx_packetdump_cb;
bool rcpi_enabled;
tSirLLStatsResults *link_stats_results;
uint64_t tx_fail_cnt;
#ifdef FEATURE_WLM_STATS
struct wma_wlm_stats_data wlm_data;
#endif
#ifdef WLAN_FEATURE_11AX
struct he_capability he_cap;
#endif
uint8_t bandcapability;
bool tx_bfee_8ss_enabled;
bool in_imps;
bool dynamic_nss_chains_support;
uint8_t ito_repeat_count;
qdf_mc_timer_t wma_fw_time_sync_timer;
qdf_atomic_t critical_events_in_flight;
bool fw_therm_throt_support;
bool enable_tx_compl_tsf64;
} t_wma_handle, *tp_wma_handle;
/**
* wma_vdev_nss_chain_params_send() - send vdev nss chain params to fw.
* @vdev_id: vdev_id
* @user_cfg: pointer to the params structure
*
* This function sends nss chain params to the fw
*
* Return: QDF_STATUS_SUCCESS on success, QDF_STATUS_E_FAILURE on error
*/
QDF_STATUS
wma_vdev_nss_chain_params_send(uint8_t vdev_id,
struct wlan_mlme_nss_chains *user_cfg);
/**
* wma_send_regdomain_info_to_fw() - send regdomain info to fw
* @reg_dmn: reg domain
* @regdmn2G: 2G reg domain
* @regdmn5G: 5G reg domain
* @ctl2G: 2G test limit
* @ctl5G: 5G test limit
*
* Return: none
*/
void wma_send_regdomain_info_to_fw(uint32_t reg_dmn, uint16_t regdmn2G,
uint16_t regdmn5G, uint8_t ctl2G,
uint8_t ctl5G);
/**
* enum frame_index - Frame index
* @GENERIC_NODOWNLD_NOACK_COMP_INDEX: Frame index for no download comp no ack
* @GENERIC_DOWNLD_COMP_NOACK_COMP_INDEX: Frame index for download comp no ack
* @GENERIC_DOWNLD_COMP_ACK_COMP_INDEX: Frame index for download comp and ack
* @GENERIC_NODOWLOAD_ACK_COMP_INDEX: Frame index for no download comp and ack
* @FRAME_INDEX_MAX: maximum frame index
*/
enum frame_index {
GENERIC_NODOWNLD_NOACK_COMP_INDEX,
GENERIC_DOWNLD_COMP_NOACK_COMP_INDEX,
GENERIC_DOWNLD_COMP_ACK_COMP_INDEX,
GENERIC_NODOWLOAD_ACK_COMP_INDEX,
FRAME_INDEX_MAX
};
/**
* struct wma_tx_ack_work_ctx - tx ack work context
* @wma_handle: wma handle
* @sub_type: sub type
* @status: status
* @ack_cmp_work: work structure
*/
struct wma_tx_ack_work_ctx {
tp_wma_handle wma_handle;
uint16_t sub_type;
int32_t status;
qdf_work_t ack_cmp_work;
};
/**
* struct wma_target_req - target request parameters
* @event_timeout: event timeout
* @node: list
* @user_data: user data
* @msg_type: message type
* @vdev_id: vdev id
* @type: type
*/
struct wma_target_req {
qdf_mc_timer_t event_timeout;
qdf_list_node_t node;
void *user_data;
uint32_t msg_type;
uint8_t vdev_id;
uint8_t type;
};
/**
* struct wma_set_key_params - set key parameters
* @vdev_id: vdev id
* @def_key_idx: used to see if we have to read the key from cfg
* @key_len: key length
* @peer_mac: peer mac address
* @singl_tid_rc: 1=Single TID based Replay Count, 0=Per TID based RC
* @key_type: key type
* @key_idx: key index
* @unicast: unicast flag
* @key_data: key data
*/
struct wma_set_key_params {
uint8_t vdev_id;
/* def_key_idx can be used to see if we have to read the key from cfg */
uint32_t def_key_idx;
uint16_t key_len;
uint8_t peer_mac[QDF_MAC_ADDR_SIZE];
uint8_t singl_tid_rc;
enum eAniEdType key_type;
uint32_t key_idx;
bool unicast;
uint8_t key_data[SIR_MAC_MAX_KEY_LENGTH];
uint8_t key_rsc[WLAN_CRYPTO_RSC_SIZE];
};
/**
* struct t_thermal_cmd_params - thermal command parameters
* @minTemp: minimum temprature
* @maxTemp: maximum temprature
* @thermalEnable: thermal enable
*/
typedef struct {
uint16_t minTemp;
uint16_t maxTemp;
uint8_t thermalEnable;
} t_thermal_cmd_params, *tp_thermal_cmd_params;
/**
* enum wma_cfg_cmd_id - wma cmd ids
* @WMA_VDEV_TXRX_FWSTATS_ENABLE_CMDID: txrx firmware stats enable command
* @WMA_VDEV_TXRX_FWSTATS_RESET_CMDID: txrx firmware stats reset command
* @WMA_VDEV_MCC_SET_TIME_LATENCY: set MCC latency time
* @WMA_VDEV_MCC_SET_TIME_QUOTA: set MCC time quota
* @WMA_VDEV_IBSS_SET_ATIM_WINDOW_SIZE: set IBSS ATIM window size
* @WMA_VDEV_IBSS_SET_POWER_SAVE_ALLOWED: set IBSS enable power save
* @WMA_VDEV_IBSS_SET_POWER_COLLAPSE_ALLOWED: set IBSS power collapse enable
* @WMA_VDEV_IBSS_SET_AWAKE_ON_TX_RX: awake IBSS on TX/RX
* @WMA_VDEV_IBSS_SET_INACTIVITY_TIME: set IBSS inactivity time
* @WMA_VDEV_IBSS_SET_TXSP_END_INACTIVITY_TIME: set IBSS TXSP
* @WMA_VDEV_IBSS_PS_SET_WARMUP_TIME_SECS: set IBSS power save warmup time
* @WMA_VDEV_IBSS_PS_SET_1RX_CHAIN_IN_ATIM_WINDOW: set IBSS power save ATIM
* @WMA_VDEV_TXRX_GET_IPA_UC_FW_STATS_CMDID: get IPA microcontroller fw stats
* @WMA_VDEV_TXRX_GET_IPA_UC_SHARING_STATS_CMDID: get IPA uC wifi-sharing stats
* @WMA_VDEV_TXRX_SET_IPA_UC_QUOTA_CMDID: set IPA uC quota limit
*
* wma command ids for configuration request which
* does not involve sending a wmi command.
*/
enum wma_cfg_cmd_id {
WMA_VDEV_TXRX_FWSTATS_ENABLE_CMDID = WMI_CMDID_MAX,
WMA_VDEV_TXRX_FWSTATS_RESET_CMDID,
WMA_VDEV_MCC_SET_TIME_LATENCY,
WMA_VDEV_MCC_SET_TIME_QUOTA,
WMA_VDEV_IBSS_SET_ATIM_WINDOW_SIZE,
WMA_VDEV_IBSS_SET_POWER_SAVE_ALLOWED,
WMA_VDEV_IBSS_SET_POWER_COLLAPSE_ALLOWED,
WMA_VDEV_IBSS_SET_AWAKE_ON_TX_RX,
WMA_VDEV_IBSS_SET_INACTIVITY_TIME,
WMA_VDEV_IBSS_SET_TXSP_END_INACTIVITY_TIME,
WMA_VDEV_IBSS_PS_SET_WARMUP_TIME_SECS,
WMA_VDEV_IBSS_PS_SET_1RX_CHAIN_IN_ATIM_WINDOW,
WMA_VDEV_TXRX_GET_IPA_UC_FW_STATS_CMDID,
WMA_VDEV_TXRX_GET_IPA_UC_SHARING_STATS_CMDID,
WMA_VDEV_TXRX_SET_IPA_UC_QUOTA_CMDID,
WMA_CMD_ID_MAX
};
/**
* struct wma_trigger_uapsd_params - trigger uapsd parameters
* @wmm_ac: wmm access category
* @user_priority: user priority
* @service_interval: service interval
* @suspend_interval: suspend interval
* @delay_interval: delay interval
*/
typedef struct wma_trigger_uapsd_params {
uint32_t wmm_ac;
uint32_t user_priority;
uint32_t service_interval;
uint32_t suspend_interval;
uint32_t delay_interval;
} t_wma_trigger_uapsd_params, *tp_wma_trigger_uapsd_params;
/**
* enum uapsd_peer_param_max_sp - U-APSD maximum service period of peer station
* @UAPSD_MAX_SP_LEN_UNLIMITED: unlimited max service period
* @UAPSD_MAX_SP_LEN_2: max service period = 2
* @UAPSD_MAX_SP_LEN_4: max service period = 4
* @UAPSD_MAX_SP_LEN_6: max service period = 6
*/
enum uapsd_peer_param_max_sp {
UAPSD_MAX_SP_LEN_UNLIMITED = 0,
UAPSD_MAX_SP_LEN_2 = 2,
UAPSD_MAX_SP_LEN_4 = 4,
UAPSD_MAX_SP_LEN_6 = 6
};
/**
* enum uapsd_peer_param_enabled_ac - U-APSD Enabled AC's of peer station
* @UAPSD_VO_ENABLED: enable uapsd for voice
* @UAPSD_VI_ENABLED: enable uapsd for video
* @UAPSD_BK_ENABLED: enable uapsd for background
* @UAPSD_BE_ENABLED: enable uapsd for best effort
*/
enum uapsd_peer_param_enabled_ac {
UAPSD_VO_ENABLED = 0x01,
UAPSD_VI_ENABLED = 0x02,
UAPSD_BK_ENABLED = 0x04,
UAPSD_BE_ENABLED = 0x08
};
/**
* enum profile_id_t - Firmware profiling index
* @PROF_CPU_IDLE: cpu idle profile
* @PROF_PPDU_PROC: ppdu processing profile
* @PROF_PPDU_POST: ppdu post profile
* @PROF_HTT_TX_INPUT: htt tx input profile
* @PROF_MSDU_ENQ: msdu enqueue profile
* @PROF_PPDU_POST_HAL: ppdu post profile
* @PROF_COMPUTE_TX_TIME: tx time profile
* @PROF_MAX_ID: max profile index
*/
enum profile_id_t {
PROF_CPU_IDLE,
PROF_PPDU_PROC,
PROF_PPDU_POST,
PROF_HTT_TX_INPUT,
PROF_MSDU_ENQ,
PROF_PPDU_POST_HAL,
PROF_COMPUTE_TX_TIME,
PROF_MAX_ID,
};
/**
* struct p2p_ie - P2P IE structural definition.
* @p2p_id: p2p id
* @p2p_len: p2p length
* @p2p_oui: p2p OUI
* @p2p_oui_type: p2p OUI type
*/
struct p2p_ie {
uint8_t p2p_id;
uint8_t p2p_len;
uint8_t p2p_oui[3];
uint8_t p2p_oui_type;
} __packed;
/**
* struct p2p_noa_descriptor - noa descriptor
* @type_count: 255: continuous schedule, 0: reserved
* @duration: Absent period duration in micro seconds
* @interval: Absent period interval in micro seconds
* @start_time: 32 bit tsf time when in starts
*/
struct p2p_noa_descriptor {
uint8_t type_count;
uint32_t duration;
uint32_t interval;
uint32_t start_time;
} __packed;
/**
* struct p2p_sub_element_noa - p2p noa element
* @p2p_sub_id: p2p sub id
* @p2p_sub_len: p2p sub length
* @index: identifies instance of NOA su element
* @oppPS: oppPS state of the AP
* @ctwindow: ctwindow in TUs
* @num_descriptors: number of NOA descriptors
* @noa_descriptors: noa descriptors
*/
struct p2p_sub_element_noa {
uint8_t p2p_sub_id;
uint8_t p2p_sub_len;
uint8_t index; /* identifies instance of NOA su element */
uint8_t oppPS:1, /* oppPS state of the AP */
ctwindow:7; /* ctwindow in TUs */
uint8_t num_descriptors; /* number of NOA descriptors */
struct p2p_noa_descriptor noa_descriptors[WMA_MAX_NOA_DESCRIPTORS];
};
/**
* struct wma_decap_info_t - decapsulation info
* @hdr: header
* @hdr_len: header length
*/
struct wma_decap_info_t {
uint8_t hdr[sizeof(struct ieee80211_qosframe_addr4)];
int32_t hdr_len;
};
/**
* enum packet_power_save - packet power save params
* @WMI_VDEV_PPS_PAID_MATCH: paid match param
* @WMI_VDEV_PPS_GID_MATCH: gid match param
* @WMI_VDEV_PPS_EARLY_TIM_CLEAR: early tim clear param
* @WMI_VDEV_PPS_EARLY_DTIM_CLEAR: early dtim clear param
* @WMI_VDEV_PPS_EOF_PAD_DELIM: eof pad delim param
* @WMI_VDEV_PPS_MACADDR_MISMATCH: macaddr mismatch param
* @WMI_VDEV_PPS_DELIM_CRC_FAIL: delim CRC fail param
* @WMI_VDEV_PPS_GID_NSTS_ZERO: gid nsts zero param
* @WMI_VDEV_PPS_RSSI_CHECK: RSSI check param
* @WMI_VDEV_PPS_5G_EBT: 5G ebt param
*/
typedef enum {
WMI_VDEV_PPS_PAID_MATCH = 0,
WMI_VDEV_PPS_GID_MATCH = 1,
WMI_VDEV_PPS_EARLY_TIM_CLEAR = 2,
WMI_VDEV_PPS_EARLY_DTIM_CLEAR = 3,
WMI_VDEV_PPS_EOF_PAD_DELIM = 4,
WMI_VDEV_PPS_MACADDR_MISMATCH = 5,
WMI_VDEV_PPS_DELIM_CRC_FAIL = 6,
WMI_VDEV_PPS_GID_NSTS_ZERO = 7,
WMI_VDEV_PPS_RSSI_CHECK = 8,
WMI_VDEV_VHT_SET_GID_MGMT = 9,
WMI_VDEV_PPS_5G_EBT = 10
} packet_power_save;
/**
* enum green_tx_param - green tx parameters
* @WMI_VDEV_PARAM_GTX_HT_MCS: ht mcs param
* @WMI_VDEV_PARAM_GTX_VHT_MCS: vht mcs param
* @WMI_VDEV_PARAM_GTX_USR_CFG: user cfg param
* @WMI_VDEV_PARAM_GTX_THRE: thre param
* @WMI_VDEV_PARAM_GTX_MARGIN: green tx margin param
* @WMI_VDEV_PARAM_GTX_STEP: green tx step param
* @WMI_VDEV_PARAM_GTX_MINTPC: mintpc param
* @WMI_VDEV_PARAM_GTX_BW_MASK: bandwidth mask
*/
typedef enum {
WMI_VDEV_PARAM_GTX_HT_MCS,
WMI_VDEV_PARAM_GTX_VHT_MCS,
WMI_VDEV_PARAM_GTX_USR_CFG,
WMI_VDEV_PARAM_GTX_THRE,
WMI_VDEV_PARAM_GTX_MARGIN,
WMI_VDEV_PARAM_GTX_STEP,
WMI_VDEV_PARAM_GTX_MINTPC,
WMI_VDEV_PARAM_GTX_BW_MASK,
} green_tx_param;
/**
* enum uapsd_ac - U-APSD Access Categories
* @UAPSD_BE: best effort
* @UAPSD_BK: back ground
* @UAPSD_VI: video
* @UAPSD_VO: voice
*/
enum uapsd_ac {
UAPSD_BE,
UAPSD_BK,
UAPSD_VI,
UAPSD_VO
};
/**
* wma_disable_uapsd_per_ac() - disable uapsd per ac
* @wmi_handle: wma handle
* @vdev_id: vdev id
* @ac: access category
*
* Return: QDF_STATUS_SUCCESS for success or error code.
*/
QDF_STATUS wma_disable_uapsd_per_ac(tp_wma_handle wma_handle,
uint32_t vdev_id, enum uapsd_ac ac);
/**
* enum uapsd_up - U-APSD User Priorities
* @UAPSD_UP_BE: best effort
* @UAPSD_UP_BK: back ground
* @UAPSD_UP_RESV: reserve
* @UAPSD_UP_EE: Excellent Effort
* @UAPSD_UP_CL: Critical Applications
* @UAPSD_UP_VI: video
* @UAPSD_UP_VO: voice
* @UAPSD_UP_NC: Network Control
*/
enum uapsd_up {
UAPSD_UP_BE,
UAPSD_UP_BK,
UAPSD_UP_RESV,
UAPSD_UP_EE,
UAPSD_UP_CL,
UAPSD_UP_VI,
UAPSD_UP_VO,
UAPSD_UP_NC,
UAPSD_UP_MAX
};
/**
* struct wma_roam_invoke_cmd - roam invoke command
* @vdev_id: vdev id
* @bssid: mac address
* @ch_freq: channel frequency
* @frame_len: frame length, includs mac header, fixed params and ies
* @frame_buf: buffer contaning probe response or beacon
* @is_same_bssid: flag to indicate if roaming is requested for same bssid
* @forced_roaming: Roaming to be done without giving bssid, and channel.
*/
struct wma_roam_invoke_cmd {
uint32_t vdev_id;
uint8_t bssid[QDF_MAC_ADDR_SIZE];
uint32_t ch_freq;
uint32_t frame_len;
uint8_t *frame_buf;
uint8_t is_same_bssid;
bool forced_roaming;
};
/**
* struct wma_process_fw_event_params - fw event parameters
* @wmi_handle: wmi handle
* @evt_buf: event buffer
*/
typedef struct {
void *wmi_handle;
void *evt_buf;
} wma_process_fw_event_params;
/**
* wma_process_fw_event_handler() - common event handler to serialize
* event processing through mc_thread
* @scn_handle: scn handle
* @ev: event buffer
* @rx_ctx: rx execution context
*
* Return: 0 on success, errno on failure
*/
int wma_process_fw_event_handler(ol_scn_t scn_handle, void *ev,
uint8_t rx_ctx);
A_UINT32 e_csr_auth_type_to_rsn_authmode(enum csr_akm_type authtype,
eCsrEncryptionType encr);
A_UINT32 e_csr_encryption_type_to_rsn_cipherset(eCsrEncryptionType encr);
/**
* wma_trigger_uapsd_params() - set trigger uapsd parameter
* @wmi_handle: wma handle
* @vdev_id: vdev id
* @trigger_uapsd_params: trigger uapsd parameters
*
* This function sets the trigger uapsd
* params such as service interval, delay
* interval and suspend interval which
* will be used by the firmware to send
* trigger frames periodically when there
* is no traffic on the transmit side.
*
* Return: QDF_STATUS_SUCCESS for success or error code.
*/
QDF_STATUS wma_trigger_uapsd_params(tp_wma_handle wma_handle, uint32_t vdev_id,
tp_wma_trigger_uapsd_params
trigger_uapsd_params);
void wma_send_flush_logs_to_fw(tp_wma_handle wma_handle);
void wma_log_completion_timeout(void *data);
#ifdef FEATURE_RSSI_MONITOR
/**
* wma_set_rssi_monitoring() - set rssi monitoring
* @handle: WMA handle
* @req: rssi monitoring request structure
*
* This function takes the incoming @req and sends it down to the
* firmware
*
* Return: QDF_STATUS
*/
QDF_STATUS wma_set_rssi_monitoring(tp_wma_handle wma,
struct rssi_monitor_param *req);
#else /* FEATURE_RSSI_MONITOR */
static inline
QDF_STATUS wma_set_rssi_monitoring(tp_wma_handle wma,
struct rssi_monitor_param *req)
{
return QDF_STATUS_SUCCESS;
}
#endif /* FEATURE_RSSI_MONITOR */
QDF_STATUS wma_send_pdev_set_pcl_cmd(tp_wma_handle wma_handle,
struct set_pcl_req *msg);
QDF_STATUS wma_send_pdev_set_hw_mode_cmd(tp_wma_handle wma_handle,
struct policy_mgr_hw_mode *msg);
QDF_STATUS wma_send_pdev_set_dual_mac_config(tp_wma_handle wma_handle,
struct policy_mgr_dual_mac_config *msg);
QDF_STATUS wma_send_pdev_set_antenna_mode(tp_wma_handle wma_handle,
struct sir_antenna_mode_param *msg);
struct wma_target_req *wma_fill_hold_req(tp_wma_handle wma,
uint8_t vdev_id, uint32_t msg_type,
uint8_t type, void *params,
uint32_t timeout);
int wma_mgmt_tx_completion_handler(void *handle, uint8_t *cmpl_event_params,
uint32_t len);
int wma_mgmt_tx_bundle_completion_handler(void *handle,
uint8_t *cmpl_event_params, uint32_t len);
uint32_t wma_get_vht_ch_width(void);
QDF_STATUS
wma_config_debug_module_cmd(wmi_unified_t wmi_handle, A_UINT32 param,
A_UINT32 val, A_UINT32 *module_id_bitmap,
A_UINT32 bitmap_len);
#ifdef FEATURE_LFR_SUBNET_DETECTION
/**
* wma_set_gateway_params() - set gateway parameters
* @wma: WMA handle
* @req: gateway update request parameter structure
*
* This function takes the incoming @req and sends it down to the
* firmware
*
* Return: QDF_STATUS
*/
QDF_STATUS wma_set_gateway_params(tp_wma_handle wma,
struct gateway_update_req_param *req);
#else
static inline
QDF_STATUS wma_set_gateway_params(tp_wma_handle wma,
struct gateway_update_req_param *req)
{
return QDF_STATUS_SUCCESS;
}
#endif /* FEATURE_LFR_SUBNET_DETECTION */
QDF_STATUS wma_lro_config_cmd(void *handle,
struct cdp_lro_hash_config *wma_lro_cmd);
QDF_STATUS wma_ht40_stop_obss_scan(tp_wma_handle wma_handle,
int32_t vdev_id);
QDF_STATUS wma_process_fw_test_cmd(WMA_HANDLE handle,
struct set_fwtest_params *wma_fwtest);
QDF_STATUS wma_send_ht40_obss_scanind(tp_wma_handle wma,
struct obss_ht40_scanind *req);
uint32_t wma_get_num_of_setbits_from_bitmask(uint32_t mask);
#ifdef FEATURE_WLAN_APF
/**
* wma_get_apf_caps_event_handler() - Event handler for get apf capability
* @handle: WMA global handle
* @cmd_param_info: command event data
* @len: Length of @cmd_param_info
*
* Return: 0 on Success or Errno on failure
*/
int wma_get_apf_caps_event_handler(void *handle,
u_int8_t *cmd_param_info,
u_int32_t len);
/**
* wma_get_apf_capabilities - Send get apf capability to firmware
* @wma_handle: wma handle
*
* Return: QDF_STATUS enumeration.
*/
QDF_STATUS wma_get_apf_capabilities(tp_wma_handle wma);
/**
* wma_set_apf_instructions - Set apf instructions to firmware
* @wma: wma handle
* @apf_set_offload: APF offload information to set to firmware
*
* Return: QDF_STATUS enumeration
*/
QDF_STATUS
wma_set_apf_instructions(tp_wma_handle wma,
struct sir_apf_set_offload *apf_set_offload);
/**
* wma_send_apf_enable_cmd - Send apf enable/disable cmd
* @wma_handle: wma handle
* @vdev_id: vdev id
* @apf_enable: true: Enable APF Int., false: Disable APF Int.
*
* Return: QDF_STATUS enumeration.
*/
QDF_STATUS wma_send_apf_enable_cmd(WMA_HANDLE handle, uint8_t vdev_id,
bool apf_enable);
/**
* wma_send_apf_write_work_memory_cmd - Command to write into the apf work
* memory
* @wma_handle: wma handle
* @write_params: APF parameters for the write operation
*
* Return: QDF_STATUS enumeration.
*/
QDF_STATUS
wma_send_apf_write_work_memory_cmd(WMA_HANDLE handle,
struct wmi_apf_write_memory_params
*write_params);
/**
* wma_send_apf_read_work_memory_cmd - Command to get part of apf work memory
* @wma_handle: wma handle
* @callback: HDD callback to receive apf get mem event
* @context: Context for the HDD callback
* @read_params: APF parameters for the get operation
*
* Return: QDF_STATUS enumeration.
*/
QDF_STATUS
wma_send_apf_read_work_memory_cmd(WMA_HANDLE handle,
struct wmi_apf_read_memory_params
*read_params);
/**
* wma_apf_read_work_memory_event_handler - Event handler for get apf mem
* operation
* @handle: wma handle
* @evt_buf: Buffer pointer to the event
* @len: Length of the event buffer
*
* Return: status.
*/
int wma_apf_read_work_memory_event_handler(void *handle, uint8_t *evt_buf,
uint32_t len);
#else /* FEATURE_WLAN_APF */
static inline QDF_STATUS wma_get_apf_capabilities(tp_wma_handle wma)
{
return QDF_STATUS_SUCCESS;
}
static inline QDF_STATUS
wma_set_apf_instructions(tp_wma_handle wma,
struct sir_apf_set_offload *apf_set_offload)
{
return QDF_STATUS_SUCCESS;
}
#endif /* FEATURE_WLAN_APF */
void wma_process_set_pdev_ie_req(tp_wma_handle wma,
struct set_ie_param *ie_params);
void wma_process_set_pdev_ht_ie_req(tp_wma_handle wma,
struct set_ie_param *ie_params);
void wma_process_set_pdev_vht_ie_req(tp_wma_handle wma,
struct set_ie_param *ie_params);
QDF_STATUS wma_remove_peer(tp_wma_handle wma, uint8_t *bssid,
uint8_t vdev_id, void *peer,
bool roam_synch_in_progress);
QDF_STATUS wma_create_peer(tp_wma_handle wma, struct cdp_pdev *pdev,
struct cdp_vdev *vdev, uint8_t peer_addr[6],
u_int32_t peer_type, u_int8_t vdev_id,
bool roam_synch_in_progress);
QDF_STATUS wma_peer_unmap_conf_cb(uint8_t vdev_id,
uint32_t peer_id_cnt,
uint16_t *peer_id_list);
/**
* wma_get_cca_stats() - send request to fw to get CCA
* @wmi_hdl: wma handle
* @vdev_id: vdev id
*
* Return: QDF status
*/
QDF_STATUS wma_get_cca_stats(tp_wma_handle wma_handle,
uint8_t vdev_id);
struct wma_ini_config *wma_get_ini_handle(tp_wma_handle wma_handle);
/**
* wma_chan_phy__mode() - get host phymode for channel
* @freq: channel freq
* @chan_width: maximum channel width possible
* @dot11_mode: maximum phy_mode possible
*
* Return: return host phymode
*/
enum wlan_phymode wma_chan_phy_mode(uint32_t freq, enum phy_ch_width chan_width,
uint8_t dot11_mode);
/**
* wma_host_to_fw_phymode() - convert host to fw phymode
* @host_phymode: phymode to convert
*
* Return: one of the values defined in enum WMI_HOST_WLAN_PHY_MODE;
* or WMI_HOST_MODE_UNKNOWN if the conversion fails
*/
WMI_HOST_WLAN_PHY_MODE wma_host_to_fw_phymode(enum wlan_phymode host_phymode);
/**
* wma_fw_to_host_phymode() - convert fw to host phymode
* @phymode: phymode to convert
*
* Return: one of the values defined in enum wlan_phymode;
* or WLAN_PHYMODE_AUTO if the conversion fails
*/
enum wlan_phymode wma_fw_to_host_phymode(WMI_HOST_WLAN_PHY_MODE phymode);
#ifdef FEATURE_OEM_DATA_SUPPORT
/**
* wma_start_oem_req_cmd() - send oem request command to fw
* @wma_handle: wma handle
* @oem_data_req: the pointer of oem req buf
*
* Return: QDF status
*/
QDF_STATUS wma_start_oem_req_cmd(tp_wma_handle wma_handle,
struct oem_data_req *oem_data_req);
#endif
#ifdef FEATURE_OEM_DATA
/**
* wma_start_oem_data_cmd() - send oem data command to fw
* @wma_handle: wma handle
* @oem_data: the pointer of oem data buf
*
* Return: QDF status
*/
QDF_STATUS wma_start_oem_data_cmd(tp_wma_handle wma_handle,
struct oem_data *oem_data);
#endif
QDF_STATUS wma_enable_disable_caevent_ind(tp_wma_handle wma_handle,
uint8_t val);
void wma_register_packetdump_callback(
ol_txrx_pktdump_cb wma_mgmt_tx_packetdump_cb,
ol_txrx_pktdump_cb wma_mgmt_rx_packetdump_cb);
void wma_deregister_packetdump_callback(void);
void wma_update_sta_inactivity_timeout(tp_wma_handle wma,
struct sme_sta_inactivity_timeout *sta_inactivity_timer);
/**
* wma_form_rx_packet() - form rx cds packet
* @buf: buffer
* @mgmt_rx_params: mgmt rx params
* @rx_pkt: cds packet
*
* This functions forms a cds packet from the rx mgmt frame received.
*
* Return: 0 for success or error code
*/
int wma_form_rx_packet(qdf_nbuf_t buf,
struct mgmt_rx_event_params *mgmt_rx_params,
cds_pkt_t *rx_pkt);
/**
* wma_mgmt_unified_cmd_send() - send the mgmt tx packet
* @vdev: objmgr vdev
* @buf: buffer
* @desc_id: desc id
* @mgmt_tx_params: mgmt rx params
*
* This functions sends mgmt tx packet to WMI layer.
*
* Return: 0 for success or error code
*/
QDF_STATUS wma_mgmt_unified_cmd_send(struct wlan_objmgr_vdev *vdev,
qdf_nbuf_t buf, uint32_t desc_id,
void *mgmt_tx_params);
/**
* wma_mgmt_nbuf_unmap_cb() - dma unmap for pending mgmt pkts
* @pdev: objmgr pdev
* @buf: buffer
*
* This function does the dma unmap of the pending mgmt packet cleanup
*
* Return: None
*/
#ifndef CONFIG_HL_SUPPORT
void wma_mgmt_nbuf_unmap_cb(struct wlan_objmgr_pdev *pdev,
qdf_nbuf_t buf);
#else
static inline void wma_mgmt_nbuf_unmap_cb(struct wlan_objmgr_pdev *pdev,
qdf_nbuf_t buf)
{}
#endif
/**
* wma_chan_info_event_handler() - chan info event handler
* @handle: wma handle
* @event_buf: event handler data
* @len: length of @event_buf
*
* this function will handle the WMI_CHAN_INFO_EVENTID
*
* Return: int
*/
int wma_chan_info_event_handler(void *handle, uint8_t *event_buf,
uint32_t len);
/**
* wma_update_vdev_pause_bitmap() - update vdev pause bitmap
* @vdev_id: the Id of the vdev to configure
* @value: value pause bitmap value
*
* Return: None
*/
static inline
void wma_vdev_update_pause_bitmap(uint8_t vdev_id, uint16_t value)
{
tp_wma_handle wma = (tp_wma_handle)cds_get_context(QDF_MODULE_ID_WMA);
struct wma_txrx_node *iface;
if (!wma) {
WMA_LOGE("%s: WMA context is invald!", __func__);
return;
}
if (vdev_id >= wma->max_bssid) {
WMA_LOGE("%s: Invalid vdev_id: %d", __func__, vdev_id);
return;
}
iface = &wma->interfaces[vdev_id];
if (!iface || !iface->vdev) {
WMA_LOGE("%s: Vdev is NULL", __func__);
return;
}
if (!wlan_vdev_get_dp_handle(iface->vdev)) {
WMA_LOGE("%s: Failed to get dp handle", __func__);
return;
}
iface->pause_bitmap = value;
}
/**
* wma_vdev_get_pause_bitmap() - Get vdev pause bitmap
* @vdev_id: the Id of the vdev to configure
*
* Return: Vdev pause bitmap value else 0 on error
*/
static inline
uint16_t wma_vdev_get_pause_bitmap(uint8_t vdev_id)
{
tp_wma_handle wma = (tp_wma_handle)cds_get_context(QDF_MODULE_ID_WMA);
struct wma_txrx_node *iface;
if (!wma) {
WMA_LOGE("%s: WMA context is invald!", __func__);
return 0;
}
iface = &wma->interfaces[vdev_id];
if (!iface || !iface->vdev) {
WMA_LOGE("%s: Vdev is NULL", __func__);
return 0;
}
if (!wlan_vdev_get_dp_handle(iface->vdev)) {
WMA_LOGE("%s: Failed to get dp handle", __func__);
return 0;
}
return iface->pause_bitmap;
}
/**
* wma_vdev_get_dp_handle() - Get vdev datapth handle
* @vdev_id: the Id of the vdev to configure
*
* Return: Vdev datapath handle else NULL on error
*/
static inline
struct cdp_vdev *wma_vdev_get_vdev_dp_handle(uint8_t vdev_id)
{
tp_wma_handle wma = (tp_wma_handle)cds_get_context(QDF_MODULE_ID_WMA);
struct wma_txrx_node *iface;
if (!wma) {
WMA_LOGE("%s: WMA context is invald!", __func__);
return NULL;
}
if (vdev_id >= wma->max_bssid)
return NULL;
iface = &wma->interfaces[vdev_id];
if (!iface || !iface->vdev) {
WMA_LOGE("%s: Vdev is NULL", __func__);
return NULL;
}
return wlan_vdev_get_dp_handle(iface->vdev);
}
/**
* wma_vdev_is_device_in_low_pwr_mode - is device in power save mode
* @vdev_id: the Id of the vdev to configure
*
* Return: true if device is in low power mode else false
*/
static inline bool wma_vdev_is_device_in_low_pwr_mode(uint8_t vdev_id)
{
tp_wma_handle wma = (tp_wma_handle)cds_get_context(QDF_MODULE_ID_WMA);
struct wma_txrx_node *iface;
if (!wma) {
WMA_LOGE("%s: WMA context is invald!", __func__);
return 0;
}
iface = &wma->interfaces[vdev_id];
if (!iface || !iface->vdev) {
WMA_LOGE("%s: Vdev is NULL", __func__);
return 0;
}
if (!wlan_vdev_get_dp_handle(iface->vdev)) {
WMA_LOGE("%s: Failed to get dp handle", __func__);
return 0;
}
return iface->in_bmps || wma->in_imps;
}
/**
* wma_vdev_get_dtim_period - Get dtim period value from mlme
* @vdev_id: vdev index number
* @value: pointer to the value to fill out
*
* Note caller must verify return status before using value
*
* Return: QDF_STATUS_SUCCESS when fetched a valid value from cfg else
* QDF_STATUS_E_FAILURE
*/
static inline
QDF_STATUS wma_vdev_get_dtim_period(uint8_t vdev_id, uint8_t *value)
{
tp_wma_handle wma = (tp_wma_handle)cds_get_context(QDF_MODULE_ID_WMA);
struct wma_txrx_node *iface;
/* set value to zero */
*value = 0;
if (!wma)
return QDF_STATUS_E_FAILURE;
iface = &wma->interfaces[vdev_id];
if (!iface || !iface->vdev || !wlan_vdev_get_dp_handle(iface->vdev))
return QDF_STATUS_E_FAILURE;
*value = iface->dtimPeriod;
return QDF_STATUS_SUCCESS;
}
/**
* wma_vdev_get_beacon_interval - Get beacon interval from mlme
* @vdev_id: vdev index number
* @value: pointer to the value to fill out
*
* Note caller must verify return status before using value
*
* Return: QDF_STATUS_SUCCESS when fetched a valid value from cfg else
* QDF_STATUS_E_FAILURE
*/
static inline
QDF_STATUS wma_vdev_get_beacon_interval(uint8_t vdev_id, uint16_t *value)
{
tp_wma_handle wma = (tp_wma_handle)cds_get_context(QDF_MODULE_ID_WMA);
struct wma_txrx_node *iface;
/* set value to zero */
*value = 0;
if (!wma)
return QDF_STATUS_E_FAILURE;
iface = &wma->interfaces[vdev_id];
if (!iface || !iface->vdev || !wlan_vdev_get_dp_handle(iface->vdev))
return QDF_STATUS_E_FAILURE;
*value = iface->beaconInterval;
return QDF_STATUS_SUCCESS;
}
/**
* wma_get_vdev_rate_flag - Get beacon rate flag from mlme
* @vdev_id: vdev index number
* @rate_flag: pointer to the value to fill out
*
* Note caller must verify return status before using value
*
* Return: QDF_STATUS_SUCCESS when fetched a valid value from mlme else
* QDF_STATUS_E_FAILURE
*/
static inline QDF_STATUS
wma_get_vdev_rate_flag(struct wlan_objmgr_vdev *vdev, uint32_t *rate_flag)
{
struct vdev_mlme_obj *mlme_obj;
if (!vdev) {
WMA_LOGE("%s vdev is NULL", __func__);
return QDF_STATUS_E_FAILURE;
}
mlme_obj = wlan_vdev_mlme_get_cmpt_obj(vdev);
if (!mlme_obj) {
WMA_LOGE("%s Failed to get mlme_obj", __func__);
return QDF_STATUS_E_FAILURE;
}
*rate_flag = mlme_obj->mgmt.rate_info.rate_flags;
return QDF_STATUS_SUCCESS;
}
/**
* wma_vdev_set_pause_bit() - Set a bit in vdev pause bitmap
* @vdev_id: the Id of the vdev to configure
* @bit_pos: set bit position in pause bitmap
*
* Return: None
*/
static inline
void wma_vdev_set_pause_bit(uint8_t vdev_id, wmi_tx_pause_type bit_pos)
{
tp_wma_handle wma = (tp_wma_handle)cds_get_context(QDF_MODULE_ID_WMA);
struct wma_txrx_node *iface;
if (!wma) {
WMA_LOGE("%s: WMA context is invald!", __func__);
return;
}
iface = &wma->interfaces[vdev_id];
if (!iface || !iface->vdev) {
WMA_LOGE("%s: Vdev is NULL", __func__);
return;
}
if (!wlan_vdev_get_dp_handle(iface->vdev)) {
WMA_LOGE("%s: Failed to get dp handle", __func__);
return;
}
iface->pause_bitmap |= (1 << bit_pos);
}
/**
* wma_vdev_clear_pause_bit() - Clear a bit from vdev pause bitmap
* @vdev_id: the Id of the vdev to configure
* @bit_pos: set bit position in pause bitmap
*
* Return: None
*/
static inline
void wma_vdev_clear_pause_bit(uint8_t vdev_id, wmi_tx_pause_type bit_pos)
{
tp_wma_handle wma = (tp_wma_handle)cds_get_context(QDF_MODULE_ID_WMA);
struct wma_txrx_node *iface;
if (!wma) {
WMA_LOGE("%s: WMA context is invald!", __func__);
return;
}
iface = &wma->interfaces[vdev_id];
if (!iface || !iface->vdev) {
WMA_LOGE("%s: Vdev is NULL", __func__);
return;
}
if (!wlan_vdev_get_dp_handle(iface->vdev)) {
WMA_LOGE("%s: Failed to get dp handle", __func__);
return;
}
iface->pause_bitmap &= ~(1 << bit_pos);
}
/**
* wma_process_roaming_config() - process roam request
* @wma_handle: wma handle
* @roam_req: roam request parameters
*
* Main routine to handle ROAM commands coming from CSR module.
*
* Return: QDF status
*/
QDF_STATUS wma_process_roaming_config(tp_wma_handle wma_handle,
struct roam_offload_scan_req *roam_req);
#ifdef WLAN_FEATURE_ROAM_OFFLOAD
/**
* wma_send_roam_preauth_status() - Send the preauth status to wmi
* @handle: WMA handle
* @roam_req: Pointer to wmi_roam_auth_status_params from sae
*
* Return: None
*/
void
wma_send_roam_preauth_status(tp_wma_handle wma_handle,
struct wmi_roam_auth_status_params *params);
#else
static inline void
wma_send_roam_preauth_status(tp_wma_handle wma_handle,
struct wmi_roam_auth_status_params *params)
{}
#endif
/**
* wma_handle_roam_sync_timeout() - Update roaming status at wma layer
* @wma_handle: wma handle
* @info: Info for roaming start timer
*
* This function gets called in case of roaming offload timer get expired
*
* Return: None
*/
void wma_handle_roam_sync_timeout(tp_wma_handle wma_handle,
struct roam_sync_timeout_timer_info *info);
#ifdef WMI_INTERFACE_EVENT_LOGGING
static inline void wma_print_wmi_cmd_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
t_wma_handle *wma = cds_get_context(QDF_MODULE_ID_WMA);
if (wma) {
print(print_priv, "Command Log (count %u)", count);
wmi_print_cmd_log(wma->wmi_handle, count, print, print_priv);
}
}
static inline void wma_print_wmi_cmd_tx_cmp_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
t_wma_handle *wma = cds_get_context(QDF_MODULE_ID_WMA);
if (wma) {
print(print_priv, "Command Tx Complete Log (count %u)", count);
wmi_print_cmd_tx_cmp_log(wma->wmi_handle, count, print,
print_priv);
}
}
static inline void wma_print_wmi_mgmt_cmd_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
t_wma_handle *wma = cds_get_context(QDF_MODULE_ID_WMA);
if (wma) {
print(print_priv, "Management Command Log (count %u)", count);
wmi_print_mgmt_cmd_log(wma->wmi_handle, count, print,
print_priv);
}
}
static inline void wma_print_wmi_mgmt_cmd_tx_cmp_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
t_wma_handle *wma = cds_get_context(QDF_MODULE_ID_WMA);
if (wma) {
print(print_priv,
"Management Command Tx Complete Log (count %u)", count);
wmi_print_mgmt_cmd_tx_cmp_log(wma->wmi_handle, count, print,
print_priv);
}
}
static inline void wma_print_wmi_event_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
t_wma_handle *wma = cds_get_context(QDF_MODULE_ID_WMA);
if (wma) {
print(print_priv, "Event Log (count %u)", count);
wmi_print_event_log(wma->wmi_handle, count, print, print_priv);
}
}
static inline void wma_print_wmi_rx_event_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
t_wma_handle *wma = cds_get_context(QDF_MODULE_ID_WMA);
if (wma) {
print(print_priv, "Rx Event Log (count %u)", count);
wmi_print_rx_event_log(wma->wmi_handle, count, print,
print_priv);
}
}
static inline void wma_print_wmi_mgmt_event_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
t_wma_handle *wma = cds_get_context(QDF_MODULE_ID_WMA);
if (wma) {
print(print_priv, "Management Event Log (count %u)", count);
wmi_print_mgmt_event_log(wma->wmi_handle, count, print,
print_priv);
}
}
#else
static inline void wma_print_wmi_cmd_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
}
static inline void wma_print_wmi_cmd_tx_cmp_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
}
static inline void wma_print_wmi_mgmt_cmd_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
}
static inline void wma_print_wmi_mgmt_cmd_tx_cmp_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
}
static inline void wma_print_wmi_event_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
}
static inline void wma_print_wmi_rx_event_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
}
static inline void wma_print_wmi_mgmt_event_log(uint32_t count,
qdf_abstract_print *print,
void *print_priv)
{
}
#endif /* WMI_INTERFACE_EVENT_LOGGING */
/**
* wma_set_rx_reorder_timeout_val() - set rx recorder timeout value
* @wma_handle: pointer to wma handle
* @reorder_timeout: rx reorder timeout value
*
* Return: QDF_STATUS
*/
QDF_STATUS wma_set_rx_reorder_timeout_val(tp_wma_handle wma_handle,
struct sir_set_rx_reorder_timeout_val *reorder_timeout);
/**
* wma_set_rx_blocksize() - set rx blocksize
* @wma_handle: pointer to wma handle
* @peer_rx_blocksize: rx blocksize for peer mac
*
* Return: QDF_STATUS_SUCCESS for success or error code.
*/
QDF_STATUS wma_set_rx_blocksize(tp_wma_handle wma_handle,
struct sir_peer_set_rx_blocksize *peer_rx_blocksize);
/**
* wma_configure_smps_params() - Configures the smps parameters to set
* @vdev_id: Virtual device for the command
* @param_id: SMPS parameter ID
* @param_val: Value to be set for the parameter
* Return: QDF_STATUS_SUCCESS or non-zero on failure
*/
QDF_STATUS wma_configure_smps_params(uint32_t vdev_id, uint32_t param_id,
uint32_t param_val);
/*
* wma_chip_power_save_failure_detected_handler() - chip pwr save fail detected
* event handler
* @handle: wma handle
* @cmd_param_info: event handler data
* @len: length of @cmd_param_info
*
* Return: QDF_STATUS_SUCCESS on success; error code otherwise
*/
int wma_chip_power_save_failure_detected_handler(void *handle,
uint8_t *cmd_param_info,
uint32_t len);
/**
* wma_get_chain_rssi() - send wmi cmd to get chain rssi
* @wma_handle: wma handler
* @req_params: requset params
*
* Return: Return QDF_STATUS
*/
QDF_STATUS wma_get_chain_rssi(tp_wma_handle wma_handle,
struct get_chain_rssi_req_params *req_params);
/**
* wma_config_bmiss_bcnt_params() - set bmiss config parameters
* @vdev_id: virtual device for the command
* @first_cnt: bmiss first value
* @final_cnt: bmiss final value
*
* Return: QDF_STATUS_SUCCESS or non-zero on failure
*/
QDF_STATUS wma_config_bmiss_bcnt_params(uint32_t vdev_id, uint32_t first_cnt,
uint32_t final_cnt);
#ifdef WLAN_POWER_MANAGEMENT_OFFLOAD
/**
* wma_check_and_set_wake_timer(): checks all interfaces and if any interface
* has install_key pending, sets timer pattern in fw to wake up host after
* specified time has elapsed.
* @time: time after which host wants to be awaken.
*
* Return: None
*/
void wma_check_and_set_wake_timer(uint32_t time);
#endif
/**
* wma_delete_invalid_peer_entries() - Delete invalid peer entries stored
* @vdev_id: virtual interface id
* @peer_mac_addr: Peer MAC address
*
* Removes the invalid peer mac entry from wma node
*/
void wma_delete_invalid_peer_entries(uint8_t vdev_id, uint8_t *peer_mac_addr);
/**
* wma_rx_invalid_peer_ind() - the callback for DP to notify WMA layer
* invalid peer data is received, this function will send message to
* lim module.
* @vdev_id: virtual device ID
* @wh: Pointer to 802.11 frame header
*
* Return: 0 for success or non-zero on failure
*/
uint8_t wma_rx_invalid_peer_ind(uint8_t vdev_id, void *wh);
/**
* is_roam_inprogress() - Is vdev in progress
* @vdev_id: vdev of interest
*
* Return: true if roaming, false otherwise
*/
bool wma_is_roam_in_progress(uint32_t vdev_id);
/**
* wma_get_psoc_from_scn_handle() - API to get psoc from scn handle
* @scn_handle: opaque wma handle
*
* API to get psoc from scn handle
*
* Return: psoc context or null in case of failure
*/
struct wlan_objmgr_psoc *wma_get_psoc_from_scn_handle(void *scn_handle);
#ifdef CRYPTO_SET_KEY_CONVERGED
/**
* wma_set_peer_ucast_cipher() - Update unicast cipher fof the peer
* @mac_addr: peer mac address
* @cipher: peer cipher type
*
* Return: None
*/
void wma_set_peer_ucast_cipher(uint8_t *mac_addr,
enum wlan_crypto_cipher_type cipher);
/**
* wma_update_set_key() - Update WMA layer for set key
* @session_id: vdev session identifier
* @pairwise: denotes if it is pairwise or group key
* @key_index: Key Index
* @cipher_type: cipher type being used for the encryption/decryption
*
* Return: None
*/
void wma_update_set_key(uint8_t session_id, bool pairwise,
uint8_t key_index,
enum wlan_crypto_cipher_type cipher_type);
#endif
/**
* wma_get_igtk() - Get the IGTK that was stored in the session earlier
* @iface: Interface for which the key is being requested
* @key_len: key length
*
* Return: Pointer to the key
*/
uint8_t *wma_get_igtk(struct wma_txrx_node *iface, uint16_t *key_len);
#ifdef WLAN_FEATURE_MOTION_DETECTION
/**
* wma_motion_det_host_event_handler - motion detection event handler
* @handle: WMA global handle
* @event: motion detection event
* @len: Length of cmd
*
* Call motion detection event callback handler
*
* Return: 0 on success, else error on failure
*/
int wma_motion_det_host_event_handler(void *handle, u_int8_t *event,
u_int32_t len);
/**
* wma_motion_det_base_line_host_event_handler - md baselining event handler
* @handle: WMA global handle
* @event: motion detection baselining event
* @len: Length of cmd
*
* Return: 0 on success, else error on failure
*/
int wma_motion_det_base_line_host_event_handler(void *handle, u_int8_t *event,
u_int32_t len);
#endif /* WLAN_FEATURE_MOTION_DETECTION */
/**
* wma_add_bss_peer_sta() - creat bss peer when sta connect
* @self_mac: self mac address
* @bssid: AP bssid
* @roam_sync: if roam sync is in progress
*
* Return: 0 on success, else error on failure
*/
QDF_STATUS wma_add_bss_peer_sta(uint8_t *self_mac, uint8_t *bssid,
bool roam_sync);
/**
* wma_send_vdev_stop() - WMA api to send vdev stop to fw
* @vdev_id: vdev id
*
* Return: 0 on success, else error on failure
*/
QDF_STATUS wma_send_vdev_stop(uint8_t vdev_id);
/**
* wma_pre_assoc_req() - wma pre assoc req when sta connect
* @add_bss: add bss param
*
* Return: QDF_STATUS
*/
QDF_STATUS wma_pre_assoc_req(struct bss_params *add_bss);
/**
* wma_add_bss_lfr3() - add bss during LFR3 offload roaming
* @wma: wma handler
* @add_bss: add bss param
*
* Return: None
*/
void wma_add_bss_lfr3(tp_wma_handle wma, struct bss_params *add_bss);
uint8_t wma_peer_get_peet_id(uint8_t *mac);
#ifdef WLAN_FEATURE_HOST_ROAM
/**
* wma_add_bss_lfr2_vdev_start() - add bss and start vdev during host roaming
* @vdev: vdev in object manager
* @add_bss: add bss param
*
* Return: None
*/
QDF_STATUS wma_add_bss_lfr2_vdev_start(struct wlan_objmgr_vdev *vdev,
struct bss_params *add_bss);
#endif
/**
* wma_send_peer_assoc_req() - wma send peer assoc req when sta connect
* @add_bss: add bss param
*
* Return: None
*/
QDF_STATUS wma_send_peer_assoc_req(struct bss_params *add_bss);
/**
* wma_get_rx_chainmask() - API to get rx chainmask from mac phy capability
* @pdev_id: pdev id
* @chainmask_2g: pointer to return 2g chainmask
* @chainmask_5g: pointer to return 5g chainmask
*
* API to get rx chainmask from mac phy capability directly.
*
* Return: QDF_STATUS_SUCCESS or non-zero on failure
*/
QDF_STATUS wma_get_rx_chainmask(uint8_t pdev_id, uint32_t *chainmask_2g,
uint32_t *chainmask_5g);
/**
* wma_handle_channel_switch_resp() - handle channel switch resp
* @wma: wma handle
* @rsp: response for channel switch
*
* Return: QDF_STATUS
*/
QDF_STATUS wma_handle_channel_switch_resp(tp_wma_handle wma,
struct vdev_start_response *rsp);
/**
* wma_pre_chan_switch_setup() - handler before channel switch vdev start
* @vdev_id: vdev id
*
* Return: QDF_STATUS
*/
QDF_STATUS wma_pre_chan_switch_setup(uint8_t vdev_id);
/**
* wma_post_chan_switch_setup() - handler after channel switch vdev start
* @vdev_id: vdev id
*
* Return: QDF_STATUS
*/
QDF_STATUS wma_post_chan_switch_setup(uint8_t vdev_id);
/**
* wma_vdev_pre_start() - prepare vdev start
* @vdev_id: vdev id
*
* Return: QDF_STATUS
*/
QDF_STATUS wma_vdev_pre_start(uint8_t vdev_id, bool restart);
/**
* wma_remove_bss_peer_on_vdev_start_failure() - remove the bss peers in case of
* vdev start request failure
* @wma: wma handle.
* @vdev_id: vdev id
*
* This API deletes the BSS peer created during ADD BSS in case of ADD BSS
* request sent to the FW fails.
*
* Return: None;
*/
void wma_remove_bss_peer_on_vdev_start_failure(tp_wma_handle wma,
uint8_t vdev_id);
/**
* wma_send_add_bss_resp() - send add bss failure
* @wma: wma handle.
* @vdev_id: vdev id
* @status: status
*
* Return: None
*/
void wma_send_add_bss_resp(tp_wma_handle wma, uint8_t vdev_id,
QDF_STATUS status);
/**
* wma_post_vdev_start_setup() - wma post vdev start handler
* @wma: wma handle.
* @vdev_id: vdev id
*
* Return: Success or Failure status
*/
QDF_STATUS wma_post_vdev_start_setup(uint8_t vdev_id);
/**
* wma_pre_vdev_start_setup() - wma pre vdev start handler
* @wma: wma handle.
* @vdev_id: vdev id
* @addbss_param: bss param
*
* Return: Success or Failure status
*/
QDF_STATUS wma_pre_vdev_start_setup(uint8_t vdev_id,
struct bss_params *add_bss);
/**
* wma_release_pending_vdev_refs() - release vdev ref taken by interface txrx
* node and delete all the peers attached to this vdev.
*
* This API loop and release vdev ref taken by all iface and all the peers
* attached to the vdev, this need to be called on recovery to flush vdev
* and peer.
*
* Return: void.
*/
void wma_release_pending_vdev_refs(void);
#endif