/* * Copyright (c) 2013-2020, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* * This file contains the API definitions for the ROAMING WMI APIs. */ #ifndef _WMI_UNIFIED_ROAM_PARAM_H_ #define _WMI_UNIFIED_ROAM_PARAM_H_ #include #include /** * struct gateway_update_req_param - gateway parameter update request * @request_id: request id * @vdev_id: vdev id * @max_retries: Max ARP/NS retry attempts * @timeout: Retry interval * @ipv4_addr_type: on ipv4 network * @ipv6_addr_type: on ipv6 network * @gw_mac_addr: gateway mac addr * @ipv4_addr: ipv4 addr * @ipv6_addr: ipv6 addr */ struct gateway_update_req_param { uint32_t request_id; uint32_t vdev_id; uint32_t max_retries; uint32_t timeout; uint32_t ipv4_addr_type; uint32_t ipv6_addr_type; struct qdf_mac_addr gw_mac_addr; uint8_t ipv4_addr[QDF_IPV4_ADDR_SIZE]; uint8_t ipv6_addr[QDF_IPV6_ADDR_SIZE]; }; /** * struct rssi_monitor_param - rssi monitoring * @request_id: request id * @vdev_id: vdev id * @min_rssi: minimum rssi * @max_rssi: maximum rssi * @control: flag to indicate start or stop */ struct rssi_monitor_param { uint32_t request_id; uint32_t vdev_id; int8_t min_rssi; int8_t max_rssi; bool control; }; /** * struct roam_offload_scan_rssi_params - structure containing * parameters for roam offload scan based on RSSI * @rssi_thresh: rssi threshold * @rssi_thresh_diff: difference in rssi threshold * @hi_rssi_scan_max_count: 5G scan max count * @hi_rssi_scan_rssi_delta: 5G scan rssi change threshold value * @hi_rssi_scan_rssi_ub: 5G scan upper bound * @raise_rssi_thresh_5g: flag to determine penalty and boost thresholds * @vdev_id: vdev id * @penalty_threshold_5g: RSSI threshold below which 5GHz RSSI is penalized * @boost_threshold_5g: RSSI threshold above which 5GHz RSSI is favored * @raise_factor_5g: factor by which 5GHz RSSI is boosted * @drop_factor_5g: factor by which 5GHz RSSI is penalized * @max_raise_rssi_5g: maximum boost that can be applied to a 5GHz RSSI * @max_drop_rssi_5g: maximum penalty that can be applied to a 5GHz RSSI * @good_rssi_threshold: RSSI below which roam is kicked in by background * scan although rssi is still good * @roam_earlystop_thres_min: Minimum RSSI threshold value for early stop, * unit is dB above NF * @roam_earlystop_thres_max: Maximum RSSI threshold value for early stop, * unit is dB above NF * @dense_rssi_thresh_offset: dense roam RSSI threshold difference * @dense_min_aps_cnt: dense roam minimum APs * @initial_dense_status: dense status detected by host * @traffic_threshold: dense roam RSSI threshold * @bg_scan_bad_rssi_thresh: Bad RSSI threshold to perform bg scan * @roam_bad_rssi_thresh_offset_2g: Offset from Bad RSSI threshold for 2G * to 5G Roam * @bg_scan_client_bitmap: Bitmap used to identify the client scans to snoop * @flags: Flags for Background Roaming * Bit 0 : BG roaming enabled when we connect to 2G AP only and roaming * to 5G AP only. * Bit 1-31: Reserved */ struct roam_offload_scan_rssi_params { int8_t rssi_thresh; uint8_t rssi_thresh_diff; uint32_t hi_rssi_scan_max_count; uint32_t hi_rssi_scan_rssi_delta; int32_t hi_rssi_scan_rssi_ub; int raise_rssi_thresh_5g; uint8_t vdev_id; uint32_t penalty_threshold_5g; uint32_t boost_threshold_5g; uint8_t raise_factor_5g; uint8_t drop_factor_5g; int max_raise_rssi_5g; int max_drop_rssi_5g; uint32_t good_rssi_threshold; uint32_t roam_earlystop_thres_min; uint32_t roam_earlystop_thres_max; int dense_rssi_thresh_offset; int dense_min_aps_cnt; int initial_dense_status; int traffic_threshold; int32_t rssi_thresh_offset_5g; int8_t bg_scan_bad_rssi_thresh; uint8_t roam_bad_rssi_thresh_offset_2g; uint32_t bg_scan_client_bitmap; uint32_t flags; }; /** * struct roam_scan_period_params - Roam scan period parameters * @vdev_id: Vdev for which the scan period parameters are sent * @scan_period: Opportunistic scan runs on a timer for scan_period * @scan_age: Duration after which the scan entries are to be aged out * @roam_scan_inactivity_time: inactivity monitoring time in ms for which the * device is considered to be inactive * @roam_inactive_data_packet_count: Maximum allowed data packets count during * roam_scan_inactivity_time. * @roam_scan_period_after_inactivity: Roam scan period in ms after device is * in inactive state. * @full_scan_period: Full scan period is the idle period in seconds * between two successive full channel roam scans. */ struct roam_scan_period_params { uint32_t vdev_id; uint32_t scan_period; uint32_t scan_age; uint32_t roam_scan_inactivity_time; uint32_t roam_inactive_data_packet_count; uint32_t roam_scan_period_after_inactivity; uint32_t full_scan_period; }; /** * struct wmi_mawc_roam_params - Motion Aided wireless connectivity params * @vdev_id: VDEV on which the parameters should be applied * @enable: MAWC roaming feature enable/disable * @traffic_load_threshold: Traffic threshold in kBps for MAWC roaming * @best_ap_rssi_threshold: AP RSSI Threshold for MAWC roaming * @rssi_stationary_high_adjust: High RSSI adjustment value to suppress scan * @rssi_stationary_low_adjust: Low RSSI adjustment value to suppress scan */ struct wmi_mawc_roam_params { uint8_t vdev_id; bool enable; uint32_t traffic_load_threshold; uint32_t best_ap_rssi_threshold; uint8_t rssi_stationary_high_adjust; uint8_t rssi_stationary_low_adjust; }; #define MAX_SSID_ALLOWED_LIST 4 #define MAX_BSSID_AVOID_LIST 16 #define MAX_BSSID_FAVORED 16 /** * struct roam_scan_filter_params - Structure holding roaming scan * parameters * @op_bitmap: bitmap to determine reason of roaming * @vdev_id: vdev id * @num_bssid_black_list: The number of BSSID's that we should avoid * connecting to. It is like a blacklist of BSSID's. * @num_ssid_white_list: The number of SSID profiles that are in the * Whitelist. When roaming, we consider the BSSID's with * this SSID also for roaming apart from the connected * one's * @num_bssid_preferred_list: Number of BSSID's which have a preference over * others * @bssid_avoid_list: Blacklist SSID's * @ssid_allowed_list: Whitelist SSID's * @bssid_favored: Favorable BSSID's * @bssid_favored_factor: RSSI to be added to this BSSID to prefer it * @lca_disallow_config_present: LCA [Last Connected AP] disallow config * present * @disallow_duration: How long LCA AP will be disallowed before it can be a * roaming candidate again, in seconds * @rssi_channel_penalization: How much RSSI will be penalized if candidate(s) * are found in the same channel as disallowed * AP's, in units of db * @num_disallowed_aps: How many APs the target should maintain in its LCA * list * @delta_rssi: (dB units) when AB in RSSI blacklist improved by at least * delta_rssi,it will be removed from blacklist * * This structure holds all the key parameters related to * initial connection and roaming connections. */ struct roam_scan_filter_params { uint32_t op_bitmap; uint8_t vdev_id; uint32_t num_bssid_black_list; uint32_t num_ssid_white_list; uint32_t num_bssid_preferred_list; struct qdf_mac_addr bssid_avoid_list[MAX_BSSID_AVOID_LIST]; struct wlan_ssid ssid_allowed_list[MAX_SSID_ALLOWED_LIST]; struct qdf_mac_addr bssid_favored[MAX_BSSID_FAVORED]; uint8_t bssid_favored_factor[MAX_BSSID_FAVORED]; uint8_t lca_disallow_config_present; uint32_t disallow_duration; uint32_t rssi_channel_penalization; uint32_t num_disallowed_aps; uint32_t num_rssi_rejection_ap; struct reject_ap_config_params rssi_rejection_ap[MAX_RSSI_AVOID_BSSID_LIST]; uint32_t delta_rssi; }; #define WMI_CFG_VALID_CHANNEL_LIST_LEN 100 /* Occupied channel list remains static */ #define WMI_CHANNEL_LIST_STATIC 1 /* Occupied channel list can be learnt after init */ #define WMI_CHANNEL_LIST_DYNAMIC_INIT 2 /* Occupied channel list can be learnt after flush */ #define WMI_CHANNEL_LIST_DYNAMIC_FLUSH 3 /* Occupied channel list can be learnt after update */ #define WMI_CHANNEL_LIST_DYNAMIC_UPDATE 4 /** * struct plm_req_params - plm req parameter * @diag_token: Dialog token * @meas_token: measurement token * @num_bursts: total number of bursts * @burst_int: burst interval in seconds * @meas_duration:in TU's,STA goes off-ch * @burst_len: no of times the STA should cycle through PLM ch list * @desired_tx_pwr: desired tx power * @mac_addr: MC dest addr * @plm_num_ch: channel numbers * @plm_ch_freq_list: channel frequency list * @vdev_id: vdev id * @enable: enable/disable */ struct plm_req_params { uint16_t diag_token; uint16_t meas_token; uint16_t num_bursts; uint16_t burst_int; uint16_t meas_duration; /* no of times the STA should cycle through PLM ch list */ uint8_t burst_len; int8_t desired_tx_pwr; struct qdf_mac_addr mac_addr; /* no of channels */ uint8_t plm_num_ch; /* channel frequency list */ uint32_t plm_ch_freq_list[WMI_CFG_VALID_CHANNEL_LIST_LEN]; uint8_t vdev_id; bool enable; }; /** * struct ap_profile - Structure ap profile to match candidate * @flags: flags * @rssi_threshold: the value of the the candidate AP should higher by this * threshold than the rssi of the currrently associated AP * @ssid: ssid vlaue to be matched * @rsn_authmode: security params to be matched * @rsn_ucastcipherset: unicast cipher set * @rsn_mcastcipherset: mcast/group cipher set * @rsn_mcastmgmtcipherset: mcast/group management frames cipher set * @rssi_abs_thresh: the value of the candidate AP should higher than this * absolute RSSI threshold. Zero means no absolute minimum * RSSI is required. units are the offset from the noise * floor in dB */ struct ap_profile { uint32_t flags; uint32_t rssi_threshold; struct wlan_ssid ssid; uint32_t rsn_authmode; uint32_t rsn_ucastcipherset; uint32_t rsn_mcastcipherset; uint32_t rsn_mcastmgmtcipherset; uint32_t rssi_abs_thresh; }; /** * struct scoring_param - scoring param to sortlist selected AP * @disable_bitmap: Each bit will be either allow(0)/disallow(1) to * considered the roam score param. * @rssi_weightage: RSSI weightage out of total score in % * @ht_weightage: HT weightage out of total score in %. * @vht_weightage: VHT weightage out of total score in %. * @he_weightaget: 11ax weightage out of total score in %. * @bw_weightage: Bandwidth weightage out of total score in %. * @band_weightage: Band(2G/5G) weightage out of total score in %. * @nss_weightage: NSS(1x1 / 2x2)weightage out of total score in %. * @esp_qbss_weightage: ESP/QBSS weightage out of total score in %. * @beamforming_weightage: Beamforming weightage out of total score in %. * @pcl_weightage: PCL weightage out of total score in %. * @oce_wan_weightage OCE WAN metrics weightage out of total score in %. * @oce_ap_tx_pwr_weightage: OCE AP TX power score in % * @oce_subnet_id_weightage: OCE subnet id score in % * @bw_index_score: channel BW scoring percentage information. * BITS 0-7 :- It contains scoring percentage of 20MHz BW * BITS 8-15 :- It contains scoring percentage of 40MHz BW * BITS 16-23 :- It contains scoring percentage of 80MHz BW * BITS 24-31 :- It contains scoring percentage of 1600MHz BW * The value of each index must be 0-100 * @band_index_score: band scording percentage information. * BITS 0-7 :- It contains scoring percentage of 2G * BITS 8-15 :- It contains scoring percentage of 5G * BITS 16-23 :- reserved * BITS 24-31 :- reserved * The value of each index must be 0-100 * @nss_index_score: NSS scoring percentage information. * BITS 0-7 :- It contains scoring percentage of 1x1 * BITS 8-15 :- It contains scoring percentage of 2x2 * BITS 16-23 :- It contains scoring percentage of 3x3 * BITS 24-31 :- It contains scoring percentage of 4x4 * The value of each index must be 0-100 * @roam_score_delta: delta value expected over the roam score of the candidate * ap over the roam score of the current ap * @roam_trigger_bitmap: bitmap of roam triggers on which roam_score_delta * will be applied * @vendor_roam_score_algorithm: Prefered algorithm for roam candidate selection * @cand_min_roam_score_delta: candidate min roam score delta value * @rssi_scoring: RSSI scoring information. * @esp_qbss_scoring: ESP/QBSS scoring percentage information * @oce_wan_scoring: OCE WAN metrics percentage information */ struct scoring_param { uint32_t disable_bitmap; int32_t rssi_weightage; int32_t ht_weightage; int32_t vht_weightage; int32_t he_weightage; int32_t bw_weightage; int32_t band_weightage; int32_t nss_weightage; int32_t esp_qbss_weightage; int32_t beamforming_weightage; int32_t pcl_weightage; int32_t oce_wan_weightage; uint32_t oce_ap_tx_pwr_weightage; uint32_t oce_subnet_id_weightage; uint32_t bw_index_score; uint32_t band_index_score; uint32_t nss_index_score; uint32_t roam_score_delta; uint32_t roam_trigger_bitmap; uint32_t vendor_roam_score_algorithm; uint32_t cand_min_roam_score_delta; struct rssi_config_score rssi_scoring; struct per_slot_score esp_qbss_scoring; struct per_slot_score oce_wan_scoring; }; /* * Currently roam score delta value and min rssi values are sent * for 2 triggers */ #define NUM_OF_ROAM_TRIGGERS 2 #define IDLE_ROAM_TRIGGER 0 #define BTM_ROAM_TRIGGER 1 #define DEAUTH_MIN_RSSI 0 #define BMISS_MIN_RSSI 1 /** * enum roam_trigger_reason - Reason for triggering roam * ROAM_TRIGGER_REASON_NONE: Roam trigger reason none * ROAM_TRIGGER_REASON_PER: Roam triggered due to packet error * ROAM_TRIGGER_REASON_BMISS: Roam triggered due to beacon miss * ROAM_TRIGGER_REASON_LOW_RSSI: Roam triggered due to low RSSI of current * connected AP. * ROAM_TRIGGER_REASON_HIGH_RSSI: Roam triggered because sta is connected to * a AP in 2.4GHz band and a better 5GHz AP is available * ROAM_TRIGGER_REASON_PERIODIC: Roam triggered as better AP was found during * periodic roam scan. * ROAM_TRIGGER_REASON_MAWC: Motion Aided WiFi Connectivity triggered roam. * ROAM_TRIGGER_REASON_DENSE: Roaming triggered due to dense environment * detected. * ROAM_TRIGGER_REASON_BACKGROUND: Roam triggered due to current AP having * poor rssi and scan candidate found in scan results provided by other * scan clients. * ROAM_TRIGGER_REASON_FORCED: Forced roam trigger. * ROAM_TRIGGER_REASON_BTM: Roam triggered due to AP sent BTM query with * Disassoc imminent bit set. * ROAM_TRIGGER_REASON_UNIT_TEST: Roam triggered due to unit test command. * ROAM_TRIGGER_REASON_BSS_LOAD: Roam triggered due to high channel utilization * in the current connected channel * ROAM_TRIGGER_REASON_DEAUTH: Roam triggered due to deauth received from the * current connected AP. * ROAM_TRIGGER_REASON_IDLE: Roam triggered due to inactivity of the device. * ROAM_TRIGGER_REASON_STA_KICKOUT: Roam triggered due to sta kickout event. * ROAM_TRIGGER_REASON_ESS_RSSI: Roam triggered due to ess rssi * ROAM_TRIGGER_REASON_MAX: Maximum number of roam triggers */ enum roam_trigger_reason { ROAM_TRIGGER_REASON_NONE = 0, ROAM_TRIGGER_REASON_PER, ROAM_TRIGGER_REASON_BMISS, ROAM_TRIGGER_REASON_LOW_RSSI, ROAM_TRIGGER_REASON_HIGH_RSSI, ROAM_TRIGGER_REASON_PERIODIC, ROAM_TRIGGER_REASON_MAWC, ROAM_TRIGGER_REASON_DENSE, ROAM_TRIGGER_REASON_BACKGROUND, ROAM_TRIGGER_REASON_FORCED, ROAM_TRIGGER_REASON_BTM, ROAM_TRIGGER_REASON_UNIT_TEST, ROAM_TRIGGER_REASON_BSS_LOAD, ROAM_TRIGGER_REASON_DEAUTH, ROAM_TRIGGER_REASON_IDLE, ROAM_TRIGGER_REASON_STA_KICKOUT, ROAM_TRIGGER_REASON_ESS_RSSI, ROAM_TRIGGER_REASON_MAX, }; /** * struct roam_trigger_min_rssi - structure to hold minimum rssi value of * candidate APs for each roam trigger * @min_rssi: minimum RSSI of candidate AP for the trigger reason specified in * trigger_id * @trigger_reason: Roam trigger reason */ struct roam_trigger_min_rssi { int32_t min_rssi; enum roam_trigger_reason trigger_reason; }; /** * struct roam_trigger_score_delta - structure to hold roam score delta value of * candidate APs for each roam trigger * @roam_score_delta: delta value in score of the candidate AP for the roam * trigger mentioned in the trigger_id. * @trigger_reason: Roam trigger reason */ struct roam_trigger_score_delta { uint32_t roam_score_delta; enum roam_trigger_reason trigger_reason; }; /** * struct ap_profile_params - ap profile params * @vdev_id: vdev id * @profile: ap profile to match candidate * @param: scoring params to short candidate * @min_rssi_params: Min RSSI values for different roam triggers * @score_delta_params: Roam score delta values for different triggers */ struct ap_profile_params { uint8_t vdev_id; struct ap_profile profile; struct scoring_param param; struct roam_trigger_min_rssi min_rssi_params[NUM_OF_ROAM_TRIGGERS]; struct roam_trigger_score_delta score_delta_param[NUM_OF_ROAM_TRIGGERS]; }; /** * struct wmi_roam_invoke_cmd - roam invoke command * @vdev_id: vdev id * @bssid: mac address * @channel: channel * @frame_len: frame length, includs mac header, fixed params and ies * @frame_buf: buffer contaning probe response or beacon * @is_same_bssid: flag to indicate if roaming is requested for same bssid * @forced_roaming: Roam to any bssid in any ch (here bssid & ch is not given) */ struct wmi_roam_invoke_cmd { uint32_t vdev_id; uint8_t bssid[QDF_MAC_ADDR_SIZE]; uint32_t channel; uint32_t frame_len; uint8_t *frame_buf; uint8_t is_same_bssid; bool forced_roaming; }; /** * struct wmi_per_roam_config - per based roaming parameters * @enable: if PER based roaming is enabled/disabled * @tx_high_rate_thresh: high rate threshold at which PER based * roam will stop in tx path * @rx_high_rate_thresh: high rate threshold at which PER based * roam will stop in rx path * @tx_low_rate_thresh: rate below which traffic will be considered * for PER based roaming in Tx path * @rx_low_rate_thresh: rate below which traffic will be considered * for PER based roaming in Tx path * @tx_rate_thresh_percnt: % above which when traffic is below low_rate_thresh * will be considered for PER based scan in tx path * @rx_rate_thresh_percnt: % above which when traffic is below low_rate_thresh * will be considered for PER based scan in rx path * @per_rest_time: time for which PER based roam will wait once it * issues a roam scan. * @tx_per_mon_time: Minimum time required to be considered as valid scenario * for PER based roam in tx path * @rx_per_mon_time: Minimum time required to be considered as valid scenario * for PER based roam in rx path * @min_candidate_rssi: Minimum RSSI threshold for candidate AP to be used for * PER based roaming */ struct wmi_per_roam_config { uint32_t enable; uint32_t tx_high_rate_thresh; uint32_t rx_high_rate_thresh; uint32_t tx_low_rate_thresh; uint32_t rx_low_rate_thresh; uint32_t tx_rate_thresh_percnt; uint32_t rx_rate_thresh_percnt; uint32_t per_rest_time; uint32_t tx_per_mon_time; uint32_t rx_per_mon_time; uint32_t min_candidate_rssi; }; /** * struct wmi_per_roam_config_req: PER based roaming config request * @vdev_id: vdev id on which config needs to be set * @per_config: PER config */ struct wmi_per_roam_config_req { uint8_t vdev_id; struct wmi_per_roam_config per_config; }; /** * struct wmi_limit_off_chan_param - limit off channel parameters * @vdev_id: vdev id * @status: status of the command (enable/disable) * @max_offchan_time: max off channel time * @rest_time: home channel time * @skip_dfs_chans: skip dfs channels during scan */ struct wmi_limit_off_chan_param { uint32_t vdev_id; bool status; uint32_t max_offchan_time; uint32_t rest_time; bool skip_dfs_chans; }; #define WMI_MAX_HLP_IE_LEN 2048 /** * struct hlp_params - HLP info params * @vdev_id: vdev id * @hlp_ie_len: HLP IE length * @hlp_ie: HLP IE */ struct hlp_params { uint8_t vdev_id; uint32_t hlp_ie_len; uint8_t hlp_ie[WMI_MAX_HLP_IE_LEN]; }; /** * struct wmi_btm_config - BSS Transition Management offload params * @vdev_id: VDEV on which the parameters should be applied * @btm_offload_config: BTM config * @btm_solicited_timeout: Timeout value for waiting BTM request * @btm_max_attempt_cnt: Maximum attempt for sending BTM query to ESS * @btm_sticky_time: Stick time after roaming to new AP by BTM * @disassoc_timer_threshold: threshold value till which the firmware can * wait before triggering the roam scan after receiving the disassoc iminent * @btm_query_bitmask: bitmask to btm query with candidate list * @btm_candidate_min_score: Minimum score of the AP to consider it as a * candidate if the roam trigger is BTM kickout. */ struct wmi_btm_config { uint8_t vdev_id; uint32_t btm_offload_config; uint32_t btm_solicited_timeout; uint32_t btm_max_attempt_cnt; uint32_t btm_sticky_time; uint32_t disassoc_timer_threshold; uint32_t btm_query_bitmask; uint32_t btm_candidate_min_score; }; /** * struct wmi_bss_load_config - BSS load trigger parameters * @vdev_id: VDEV on which the parameters should be applied * @bss_load_threshold: BSS load threshold after which roam scan should trigger * @bss_load_sample_time: Time duration in milliseconds for which the bss load * trigger needs to be enabled * @rssi_threshold_5ghz: RSSI threshold of the current connected AP below which * roam should be triggered if bss load threshold exceeds the configured value. * This value is applicable only when we are connected in 5GHz band. * @rssi_threshold_24ghz: RSSI threshold of the current connected AP below which * roam should be triggered if bss load threshold exceeds the configured value. * This value is applicable only when we are connected in 2.4GHz band. */ struct wmi_bss_load_config { uint32_t vdev_id; uint32_t bss_load_threshold; uint32_t bss_load_sample_time; int32_t rssi_threshold_5ghz; int32_t rssi_threshold_24ghz; }; /** * struct wmi_idle_roam_params - Idle roam trigger parameters * @vdev_id: VDEV on which the parameters should be applied * @enable: Enable/Disable Idle roaming * @band: Connected AP band * @conn_ap_rssi_delta: Rssi change of connected AP in dBm * @conn_ap_min_rssi: If connected AP rssi is less than min rssi trigger roam * @inactive_time: Connected AP idle time * @data_pkt_count: Data packet count allowed during idle time */ struct wmi_idle_roam_params { uint32_t vdev_id; bool enable; uint32_t band; uint32_t conn_ap_rssi_delta; int32_t conn_ap_min_rssi; uint32_t inactive_time; uint32_t data_pkt_count; }; /** * struct wmi_disconnect_roam_params - Emergency deauth/disconnect roam params * @vdev_id: VDEV on which the parameters should be applied * @enable: Enable or disable disconnect roaming. */ struct wmi_disconnect_roam_params { uint32_t vdev_id; bool enable; }; /** * struct wmi_roam_auth_status_params - WPA3 roam auth response status * parameters * @vdev_id: Vdev on which roam preauth is happening * @preauth_status: Status of the Auth response. * IEEE80211_STATUS_SUCCESS(0) for success. Corresponding * IEEE80211 failure status code for failure. * * @bssid: Candidate BSSID * @pmkid: PMKID derived for the auth */ struct wmi_roam_auth_status_params { uint32_t vdev_id; uint32_t preauth_status; struct qdf_mac_addr bssid; uint8_t pmkid[PMKID_LEN]; }; /** * @time_offset: time offset after 11k offload command to trigger a neighbor * report request (in seconds) * @low_rssi_offset: Offset from rssi threshold to trigger a neighbor * report request (in dBm) * @bmiss_count_trigger: Number of beacon miss events to trigger neighbor * report request * @per_threshold_offset: offset from PER threshold to trigger neighbor * report request (in %) * @neighbor_report_cache_timeout: timeout after which new trigger can enable * sending of a neighbor report request (in seconds) * @max_neighbor_report_req_cap: max number of neighbor report requests that * can be sent to the peer in the current session * @ssid: Current connect SSID info */ struct wmi_11k_offload_neighbor_report_params { uint32_t time_offset; uint32_t low_rssi_offset; uint32_t bmiss_count_trigger; uint32_t per_threshold_offset; uint32_t neighbor_report_cache_timeout; uint32_t max_neighbor_report_req_cap; struct wlan_ssid ssid; }; /** * struct wmi_11k_offload_params - offload 11k features to FW * @vdev_id: vdev id * @offload_11k_bitmask: bitmask to specify offloaded features * B0: Neighbor Report Request offload * B1-B31: Reserved * @neighbor_report_params: neighbor report offload params */ struct wmi_11k_offload_params { uint32_t vdev_id; uint32_t offload_11k_bitmask; struct wmi_11k_offload_neighbor_report_params neighbor_report_params; }; /** * struct wmi_invoke_neighbor_report_params - Invoke neighbor report request * from IW to FW * @vdev_id: vdev id * @send_resp_to_host: bool to send response to host or not * @ssid: ssid given from the IW command */ struct wmi_invoke_neighbor_report_params { uint32_t vdev_id; uint32_t send_resp_to_host; struct wlan_ssid ssid; }; /** * struct roam_triggers - vendor configured roam triggers * @vdev_id: vdev id * @trigger_bitmap: vendor configured roam trigger bitmap as * defined @enum roam_control_trigger_reason */ struct roam_triggers { uint32_t vdev_id; uint32_t trigger_bitmap; }; /** * set_pcl_cmd_params - Set PCL command params * @vdev_id: Vdev id * @weight: PCL weight */ struct set_pcl_cmd_params { uint8_t vdev_id; struct wmi_pcl_chan_weights *weights; }; #endif /* _WMI_UNIFIED_ROAM_PARAM_H_ */