// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2016-2019, STMicroelectronics Limited.
* Authors: AMG(Analog Mems Group)
*
* marco.cali@st.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/device.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/interrupt.h>
#include <linux/hrtimer.h>
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
#include <linux/completion.h>
/*#include <linux/wakelock.h>*/
#include <linux/pm_wakeup.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <linux/of_irq.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#if defined(CONFIG_FB_MSM)
#include <linux/notifier.h>
#include <linux/fb.h>
#else
#include <drm/drm_panel.h>
#endif
#ifdef KERNEL_ABOVE_2_6_38
#include <linux/input/mt.h>
#endif
#include "fts.h"
#include "fts_lib/ftsCompensation.h"
#include "fts_lib/ftsIO.h"
#include "fts_lib/ftsError.h"
#include "fts_lib/ftsFlash.h"
#include "fts_lib/ftsFrame.h"
#include "fts_lib/ftsGesture.h"
#include "fts_lib/ftsTest.h"
#include "fts_lib/ftsTime.h"
#include "fts_lib/ftsTool.h"
#include "linux/moduleparam.h"
#if defined(CONFIG_ST_TRUSTED_TOUCH)
#include <linux/atomic.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
#include <linux/debugfs.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
#include "linux/gunyah/gh_irq_lend.h"
#include "linux/gunyah/gh_msgq.h"
#include "linux/gunyah/gh_mem_notifier.h"
#include "linux/gunyah/gh_rm_drv.h"
#include <linux/sort.h>
#endif
#define LINK_KOBJ_NAME "tp"
#define FTS_DVDD_VOL_MIN 1800000
#define FTS_DVDD_VOL_MAX 1800000
#define FTS_DVDD_LOAD 20000
#define FTS_AVDD_VOL_MIN 3000000
#define FTS_AVDD_VOL_MAX 3300000
#define FTS_AVDD_LOAD 20000
/*
* Uncomment to use polling mode instead of interrupt mode.
*
*/
// #define FTS_USE_POLLING_MODE
/*
* Event installer helpers
*/
#define event_id(_e) EVENTID_##_e
#define handler_name(_h) fts_##_h##_event_handler
#define install_handler(_i, _evt, _hnd) \
(_i->event_dispatch_table[event_id(_evt)].handler = handler_name(_hnd))
/*
* Asyncronouns command helper
*/
#define WAIT_WITH_TIMEOUT(_info, _timeout, _command) \
do { \
if (wait_for_completion_timeout(&_info->cmd_done, _timeout) == 0) { \
dev_warn(_info->dev, "Waiting for %s command: timeout\n", \
#_command); \
} \
} while (0)
#ifdef KERNEL_ABOVE_2_6_38
#define TYPE_B_PROTOCOL
#endif
#if defined(SCRIPTLESS) || defined(DRIVER_TEST)
static struct class *fts_cmd_class;
#endif
static void fts_interrupt_disable(struct fts_ts_info *info);
static void fts_interrupt_enable(struct fts_ts_info *info);
static irqreturn_t fts_interrupt_handler(int irq, void *handle);
static int fts_probe_delayed(struct fts_ts_info *info);
#ifdef CONFIG_ST_TRUSTED_TOUCH
static struct gh_acl_desc *fts_vm_get_acl(enum gh_vm_names vm_name)
{
struct gh_acl_desc *acl_desc;
gh_vmid_t vmid;
gh_rm_get_vmid(vm_name, &vmid);
acl_desc = kzalloc(offsetof(struct gh_acl_desc, acl_entries[1]),
GFP_KERNEL);
if (!acl_desc)
return ERR_PTR(ENOMEM);
acl_desc->n_acl_entries = 1;
acl_desc->acl_entries[0].vmid = vmid;
acl_desc->acl_entries[0].perms = GH_RM_ACL_R | GH_RM_ACL_W;
return acl_desc;
}
static struct gh_sgl_desc *fts_vm_get_sgl(struct trusted_touch_vm_info *vm_info)
{
struct gh_sgl_desc *sgl_desc;
int i;
sgl_desc = kzalloc(offsetof(struct gh_sgl_desc,
sgl_entries[vm_info->iomem_list_size]), GFP_KERNEL);
if (!sgl_desc)
return ERR_PTR(ENOMEM);
sgl_desc->n_sgl_entries = vm_info->iomem_list_size;
for (i = 0; i < vm_info->iomem_list_size; i++) {
sgl_desc->sgl_entries[i].ipa_base = vm_info->iomem_bases[i];
sgl_desc->sgl_entries[i].size = vm_info->iomem_sizes[i];
}
return sgl_desc;
}
static int fts_populate_vm_info(struct fts_ts_info *info)
{
int rc = 0;
struct trusted_touch_vm_info *vm_info;
struct device_node *np = info->client->dev.of_node;
int num_regs, num_sizes = 0;
vm_info = kzalloc(sizeof(struct trusted_touch_vm_info), GFP_KERNEL);
if (!vm_info) {
rc = -ENOMEM;
goto error;
}
info->vm_info = vm_info;
vm_info->irq_label = GH_IRQ_LABEL_TRUSTED_TOUCH;
vm_info->vm_name = GH_TRUSTED_VM;
rc = of_property_read_u32(np, "st,trusted-touch-spi-irq",
&vm_info->hw_irq);
if (rc) {
pr_err("Failed to read trusted touch SPI irq:%d\n", rc);
goto vm_error;
}
num_regs = of_property_count_u32_elems(np,
"st,trusted-touch-io-bases");
if (num_regs < 0) {
pr_err("Invalid number of IO regions specified\n");
rc = -EINVAL;
goto vm_error;
}
num_sizes = of_property_count_u32_elems(np,
"st,trusted-touch-io-sizes");
if (num_sizes < 0) {
pr_err("Invalid number of IO regions specified\n");
rc = -EINVAL;
goto vm_error;
}
if (num_regs != num_sizes) {
pr_err("IO bases and sizes doe not match\n");
rc = -EINVAL;
goto vm_error;
}
vm_info->iomem_list_size = num_regs;
vm_info->iomem_bases = kcalloc(num_regs, sizeof(*vm_info->iomem_bases),
GFP_KERNEL);
if (!vm_info->iomem_bases) {
rc = -ENOMEM;
goto vm_error;
}
rc = of_property_read_u32_array(np, "st,trusted-touch-io-bases",
vm_info->iomem_bases, vm_info->iomem_list_size);
if (rc) {
pr_err("Failed to read trusted touch io bases:%d\n", rc);
goto io_bases_error;
}
vm_info->iomem_sizes = kzalloc(
sizeof(*vm_info->iomem_sizes) * num_sizes, GFP_KERNEL);
if (!vm_info->iomem_sizes) {
rc = -ENOMEM;
goto io_bases_error;
}
rc = of_property_read_u32_array(np, "st,trusted-touch-io-sizes",
vm_info->iomem_sizes, vm_info->iomem_list_size);
if (rc) {
pr_err("Failed to read trusted touch io sizes:%d\n", rc);
goto io_sizes_error;
}
return rc;
io_sizes_error:
kfree(vm_info->iomem_sizes);
io_bases_error:
kfree(vm_info->iomem_bases);
vm_error:
kfree(vm_info);
error:
return rc;
}
static void fts_destroy_vm_info(struct fts_ts_info *info)
{
kfree(info->vm_info->iomem_sizes);
kfree(info->vm_info->iomem_bases);
kfree(info->vm_info);
}
static void fts_vm_deinit(struct fts_ts_info *info)
{
if (info->vm_info->mem_cookie)
gh_mem_notifier_unregister(info->vm_info->mem_cookie);
fts_destroy_vm_info(info);
}
#ifdef CONFIG_ARCH_QTI_VM
static int fts_vm_mem_release(struct fts_ts_info *info);
static void fts_trusted_touch_vm_mode_disable(struct fts_ts_info *info);
static int fts_sgl_cmp(const void *a, const void *b)
{
struct gh_sgl_entry *left = (struct gh_sgl_entry *)a;
struct gh_sgl_entry *right = (struct gh_sgl_entry *)b;
return (left->ipa_base - right->ipa_base);
}
static int fts_vm_compare_sgl_desc(struct gh_sgl_desc *expected,
struct gh_sgl_desc *received)
{
int idx;
if (expected->n_sgl_entries != received->n_sgl_entries)
return -E2BIG;
sort(received->sgl_entries, received->n_sgl_entries,
sizeof(received->sgl_entries[0]), fts_sgl_cmp, NULL);
sort(expected->sgl_entries, expected->n_sgl_entries,
sizeof(expected->sgl_entries[0]), fts_sgl_cmp, NULL);
for (idx = 0; idx < expected->n_sgl_entries; idx++) {
struct gh_sgl_entry *left = &expected->sgl_entries[idx];
struct gh_sgl_entry *right = &received->sgl_entries[idx];
if ((left->ipa_base != right->ipa_base) ||
(left->size != right->size)) {
pr_err("sgl mismatch: left_base:%d right base:%d left size:%d right size:%d\n",
left->ipa_base, right->ipa_base,
left->size, right->size);
return -EINVAL;
}
}
return 0;
}
static int fts_vm_handle_vm_hardware(struct fts_ts_info *info)
{
int rc = 0;
if (atomic_read(&info->delayed_vm_probe_pending)) {
rc = fts_probe_delayed(info);
if (rc) {
pr_err(" Delayed probe failure on VM!\n");
return rc;
}
atomic_set(&info->delayed_vm_probe_pending, 0);
return rc;
}
queue_delayed_work(info->fwu_workqueue, &info->fwu_work,
msecs_to_jiffies(EXP_FN_WORK_DELAY_MS));
fts_interrupt_enable(info);
return rc;
}
static void fts_vm_irq_on_lend_callback(void *data,
unsigned long notif_type,
enum gh_irq_label label)
{
struct fts_ts_info *info = data;
struct irq_data *irq_data;
int irq = 0;
int const resource_timeout = msecs_to_jiffies(2000);
int rc = 0;
irq = gh_irq_accept(info->vm_info->irq_label, -1, IRQ_TYPE_LEVEL_HIGH);
if (irq < 0) {
pr_err("failed to accept irq\n");
goto irq_fail;
}
atomic_set(&info->vm_info->tvm_owns_irq, 1);
irq_data = irq_get_irq_data(irq);
if (!irq_data) {
pr_err("Invalid irq data for trusted touch\n");
goto irq_fail;
}
if (!irq_data->hwirq) {
pr_err("Invalid irq in irq data\n");
goto irq_fail;
}
if (irq_data->hwirq != info->vm_info->hw_irq) {
pr_err("Invalid irq lent\n");
goto irq_fail;
}
pr_debug("irq:returned from accept:%d\n", irq);
info->client->irq = irq;
if (!wait_for_completion_timeout(&info->resource_checkpoint,
resource_timeout)) {
pr_err("Resources not acquired in TVM\n");
goto irq_fail;
}
rc = fts_vm_handle_vm_hardware(info);
if (rc) {
pr_err(" Delayed probe failure on VM!\n");
goto irq_fail;
}
atomic_set(&info->trusted_touch_enabled, 1);
return;
irq_fail:
fts_trusted_touch_vm_mode_disable(info);
}
static void fts_vm_mem_on_lend_handler(enum gh_mem_notifier_tag tag,
unsigned long notif_type, void *entry_data, void *notif_msg)
{
struct gh_rm_notif_mem_shared_payload *payload;
struct gh_sgl_desc *sgl_desc, *expected_sgl_desc;
struct gh_acl_desc *acl_desc;
struct trusted_touch_vm_info *vm_info;
struct fts_ts_info *info;
int rc = 0;
if (notif_type != GH_RM_NOTIF_MEM_SHARED ||
tag != GH_MEM_NOTIFIER_TAG_TOUCH) {
pr_err("Invalid command passed from rm\n");
return;
}
if (!entry_data || !notif_msg) {
pr_err("Invalid entry data passed from rm\n");
return;
}
info = (struct fts_ts_info *)entry_data;
vm_info = info->vm_info;
if (!vm_info) {
pr_err("Invalid vm_info\n");
return;
}
payload = (struct gh_rm_notif_mem_shared_payload *)notif_msg;
if (payload->trans_type != GH_RM_TRANS_TYPE_LEND ||
payload->label != TRUSTED_TOUCH_MEM_LABEL) {
pr_err("Invalid label or transaction type\n");
goto onlend_fail;
}
acl_desc = fts_vm_get_acl(GH_TRUSTED_VM);
if (IS_ERR(acl_desc)) {
pr_err("failed to populated acl data:rc=%d\n",
PTR_ERR(acl_desc));
goto onlend_fail;
}
sgl_desc = gh_rm_mem_accept(payload->mem_handle, GH_RM_MEM_TYPE_IO,
GH_RM_TRANS_TYPE_LEND,
GH_RM_MEM_ACCEPT_VALIDATE_ACL_ATTRS |
GH_RM_MEM_ACCEPT_VALIDATE_LABEL |
GH_RM_MEM_ACCEPT_DONE, payload->label, acl_desc,
NULL, NULL, 0);
if (IS_ERR_OR_NULL(sgl_desc)) {
pr_err("failed to do mem accept :rc=%d\n",
PTR_ERR(sgl_desc));
goto acl_fail;
}
atomic_set(&vm_info->tvm_owns_iomem, 1);
/* Initiate i2c session on tvm */
rc = pm_runtime_get_sync(info->client->adapter->dev.parent);
if (rc < 0) {
pr_err("failed to get sync rc:%d\n", rc);
(void)fts_vm_mem_release(info);
atomic_set(&info->vm_info->tvm_owns_iomem, 0);
goto acl_fail;
}
complete(&info->resource_checkpoint);
expected_sgl_desc = fts_vm_get_sgl(vm_info);
if (fts_vm_compare_sgl_desc(expected_sgl_desc, sgl_desc)) {
pr_err("IO sg list does not match\n");
goto sgl_cmp_fail;
}
vm_info->vm_mem_handle = payload->mem_handle;
kfree(expected_sgl_desc);
kfree(acl_desc);
return;
sgl_cmp_fail:
kfree(expected_sgl_desc);
acl_fail:
kfree(acl_desc);
onlend_fail:
fts_trusted_touch_vm_mode_disable(info);
}
static int fts_vm_mem_release(struct fts_ts_info *info)
{
int rc = 0;
rc = gh_rm_mem_release(info->vm_info->vm_mem_handle, 0);
if (rc)
pr_err("VM mem release failed: rc=%d\n", rc);
rc = gh_rm_mem_notify(info->vm_info->vm_mem_handle,
GH_RM_MEM_NOTIFY_OWNER_RELEASED,
GH_MEM_NOTIFIER_TAG_TOUCH, 0);
if (rc)
pr_err("Failed to notify mem release to PVM: rc=%d\n");
info->vm_info->vm_mem_handle = 0;
return rc;
}
static void fts_trusted_touch_vm_mode_disable(struct fts_ts_info *info)
{
int rc = 0;
if (atomic_read(&info->vm_info->tvm_owns_iomem) &&
atomic_read(&info->vm_info->tvm_owns_irq))
fts_interrupt_disable(info);
if (atomic_read(&info->vm_info->tvm_owns_iomem)) {
flushFIFO();
release_all_touches(info);
rc = fts_vm_mem_release(info);
if (rc)
pr_err("Failed to release mem rc:%d\n", rc);
else
atomic_set(&info->vm_info->tvm_owns_iomem, 0);
pm_runtime_put_sync(info->client->adapter->dev.parent);
}
if (atomic_read(&info->vm_info->tvm_owns_irq)) {
rc = gh_irq_release(info->vm_info->irq_label);
if (rc)
pr_err("Failed to release irq rc:%d\n", rc);
else
atomic_set(&info->vm_info->tvm_owns_irq, 0);
rc = gh_irq_release_notify(info->vm_info->irq_label);
if (rc)
pr_err("Failed to notify release irq rc:%d\n", rc);
}
atomic_set(&info->trusted_touch_enabled, 0);
reinit_completion(&info->resource_checkpoint);
pr_debug("trusted touch disabled\n");
}
static int fts_handle_trusted_touch_tvm(struct fts_ts_info *info, int value)
{
int err = 0;
switch (value) {
case 0:
if (atomic_read(&info->trusted_touch_enabled) == 0) {
pr_err("Trusted touch is already disabled\n");
break;
}
if (atomic_read(&info->trusted_touch_mode) ==
TRUSTED_TOUCH_VM_MODE) {
fts_trusted_touch_vm_mode_disable(info);
} else {
pr_err("Unsupported trusted touch mode\n");
}
break;
case 1:
if (atomic_read(&info->trusted_touch_enabled)) {
pr_err("Trusted touch usecase underway\n");
err = -EBUSY;
break;
}
if (atomic_read(&info->trusted_touch_mode) ==
TRUSTED_TOUCH_VM_MODE) {
pr_err("Cannot turnon trusted touch(vm mode) in VM\n");
} else {
pr_err("Unsupported trusted touch mode\n");
}
break;
default:
dev_err(&info->client->dev, "unsupported value: %lu\n", value);
err = -EINVAL;
break;
}
return err;
}
#else
static int fts_clk_prepare_enable(struct fts_ts_info *info)
{
int ret;
ret = clk_prepare_enable(info->iface_clk);
if (ret) {
dev_err(&info->client->dev,
"error on clk_prepare_enable(iface_clk):%d\n", ret);
return ret;
}
ret = clk_prepare_enable(info->core_clk);
if (ret) {
clk_disable_unprepare(info->iface_clk);
dev_err(&info->client->dev,
"error clk_prepare_enable(core_clk):%d\n", ret);
}
return ret;
}
static void fts_clk_disable_unprepare(struct fts_ts_info *info)
{
clk_disable_unprepare(info->core_clk);
clk_disable_unprepare(info->iface_clk);
}
static int fts_bus_get(struct fts_ts_info *info)
{
int rc = 0;
mutex_lock(&info->fts_clk_io_ctrl_mutex);
rc = pm_runtime_get_sync(info->client->adapter->dev.parent);
if (rc >= 0 && info->core_clk != NULL && info->iface_clk != NULL) {
rc = fts_clk_prepare_enable(info);
if (rc)
pm_runtime_put_sync(info->client->adapter->dev.parent);
}
mutex_unlock(&info->fts_clk_io_ctrl_mutex);
return rc;
}
static void fts_bus_put(struct fts_ts_info *info)
{
mutex_lock(&info->fts_clk_io_ctrl_mutex);
if (info->core_clk != NULL && info->iface_clk != NULL)
fts_clk_disable_unprepare(info);
pm_runtime_put_sync(info->client->adapter->dev.parent);
mutex_unlock(&info->fts_clk_io_ctrl_mutex);
}
static struct gh_notify_vmid_desc *fts_vm_get_vmid(gh_vmid_t vmid)
{
struct gh_notify_vmid_desc *vmid_desc;
vmid_desc = kzalloc(offsetof(struct gh_notify_vmid_desc,
vmid_entries[1]), GFP_KERNEL);
if (!vmid_desc)
return ERR_PTR(ENOMEM);
vmid_desc->n_vmid_entries = 1;
vmid_desc->vmid_entries[0].vmid = vmid;
return vmid_desc;
}
static void fts_trusted_touch_complete(struct fts_ts_info *info)
{
if (atomic_read(&info->vm_info->pvm_owns_iomem) &&
atomic_read(&info->vm_info->pvm_owns_irq)) {
fts_interrupt_enable(info);
fts_bus_put(info);
complete(&info->trusted_touch_powerdown);
atomic_set(&info->trusted_touch_enabled, 0);
pr_debug("reenabled interrupts on PVM\n");
} else {
pr_err("PVM does not own irq and IOMEM\n");
}
}
static void fts_vm_irq_on_release_callback(void *data,
unsigned long notif_type,
enum gh_irq_label label)
{
struct fts_ts_info *info = data;
int rc = 0;
rc = gh_irq_reclaim(info->vm_info->irq_label);
if (rc)
pr_err("failed to reclaim irq on pvm rc:%d\n", rc);
else
atomic_set(&info->vm_info->pvm_owns_irq, 1);
}
static void fts_vm_mem_on_release_handler(enum gh_mem_notifier_tag tag,
unsigned long notif_type, void *entry_data, void *notif_msg)
{
struct gh_rm_notif_mem_released_payload *payload;
struct trusted_touch_vm_info *vm_info;
struct fts_ts_info *info;
int rc = 0;
if (notif_type != GH_RM_NOTIF_MEM_RELEASED ||
tag != GH_MEM_NOTIFIER_TAG_TOUCH) {
pr_err(" Invalid tag or command passed\n");
return;
}
if (!entry_data || !notif_msg) {
pr_err(" Invalid data or notification message\n");
return;
}
payload = (struct gh_rm_notif_mem_released_payload *)notif_msg;
info = (struct fts_ts_info *)entry_data;
vm_info = info->vm_info;
if (!vm_info) {
pr_err(" Invalid vm_info\n");
return;
}
if (payload->mem_handle != vm_info->vm_mem_handle) {
pr_err("Invalid mem handle detected\n");
return;
}
rc = gh_rm_mem_reclaim(payload->mem_handle, 0);
if (rc) {
pr_err("Trusted touch VM mem release failed rc:%d\n", rc);
return;
}
atomic_set(&vm_info->pvm_owns_iomem, 1);
vm_info->vm_mem_handle = 0;
}
static int fts_vm_mem_lend(struct fts_ts_info *info)
{
struct gh_acl_desc *acl_desc;
struct gh_sgl_desc *sgl_desc;
struct gh_notify_vmid_desc *vmid_desc;
gh_memparcel_handle_t mem_handle;
gh_vmid_t trusted_vmid;
int rc = 0;
acl_desc = fts_vm_get_acl(GH_TRUSTED_VM);
if (IS_ERR(acl_desc)) {
pr_err("Failed to get acl of IO memories for Trusted touch\n");
PTR_ERR(acl_desc);
return -EINVAL;
}
sgl_desc = fts_vm_get_sgl(info->vm_info);
if (IS_ERR(sgl_desc)) {
pr_err("Failed to get sgl of IO memories for Trusted touch\n");
PTR_ERR(sgl_desc);
rc = -EINVAL;
goto sgl_error;
}
rc = gh_rm_mem_lend(GH_RM_MEM_TYPE_IO, 0, TRUSTED_TOUCH_MEM_LABEL,
acl_desc, sgl_desc, NULL, &mem_handle);
if (rc) {
pr_err("Failed to lend IO memories for Trusted touch rc:%d\n",
rc);
goto error;
}
gh_rm_get_vmid(GH_TRUSTED_VM, &trusted_vmid);
vmid_desc = fts_vm_get_vmid(trusted_vmid);
rc = gh_rm_mem_notify(mem_handle, GH_RM_MEM_NOTIFY_RECIPIENT_SHARED,
GH_MEM_NOTIFIER_TAG_TOUCH, vmid_desc);
if (rc) {
pr_err("Failed to notify mem lend to hypervisor rc:%d\n", rc);
goto vmid_error;
}
info->vm_info->vm_mem_handle = mem_handle;
vmid_error:
kfree(vmid_desc);
error:
kfree(sgl_desc);
sgl_error:
kfree(acl_desc);
return rc;
}
static int fts_trusted_touch_vm_mode_enable(struct fts_ts_info *info)
{
int rc = 0;
struct trusted_touch_vm_info *vm_info = info->vm_info;
/* i2c session start and resource acquire */
if (fts_bus_get(info) < 0) {
dev_err(&info->client->dev, "fts_bus_get failed\n");
rc = -EIO;
return rc;
}
/* flush pending interurpts from FIFO */
fts_interrupt_disable(info);
flushFIFO();
release_all_touches(info);
rc = fts_vm_mem_lend(info);
if (rc) {
pr_err("Failed to lend memory\n");
return -EINVAL;
}
atomic_set(&vm_info->pvm_owns_iomem, 0);
rc = gh_irq_lend_v2(vm_info->irq_label, vm_info->vm_name,
info->client->irq, &fts_vm_irq_on_release_callback, info);
if (rc) {
pr_err("Failed to lend irq\n");
return -EINVAL;
}
atomic_set(&vm_info->pvm_owns_irq, 0);
rc = gh_irq_lend_notify(vm_info->irq_label);
if (rc) {
pr_err("Failed to notify irq\n");
return -EINVAL;
}
reinit_completion(&info->trusted_touch_powerdown);
atomic_set(&info->trusted_touch_enabled, 1);
pr_debug("trusted touch enabled\n");
return rc;
}
static int fts_handle_trusted_touch_pvm(struct fts_ts_info *info, int value)
{
int err = 0;
switch (value) {
case 0:
if (atomic_read(&info->trusted_touch_enabled) == 0) {
pr_err("Trusted touch is already disabled\n");
break;
}
if (atomic_read(&info->trusted_touch_mode) ==
TRUSTED_TOUCH_VM_MODE) {
fts_trusted_touch_complete(info);
} else {
pr_err("Unsupported trusted touch mode\n");
}
break;
case 1:
if (atomic_read(&info->trusted_touch_enabled)) {
pr_err("Trusted touch usecase underway\n");
err = -EBUSY;
break;
}
if (atomic_read(&info->trusted_touch_mode) ==
TRUSTED_TOUCH_VM_MODE) {
err = fts_trusted_touch_vm_mode_enable(info);
} else {
pr_err("Unsupported trusted touch mode\n");
}
break;
default:
dev_err(&info->client->dev, "unsupported value: %lu\n", value);
err = -EINVAL;
break;
}
return err;
}
#endif
static int fts_vm_init(struct fts_ts_info *info)
{
int rc = 0;
struct trusted_touch_vm_info *vm_info;
void *mem_cookie;
rc = fts_populate_vm_info(info);
if (rc) {
pr_err("Cannot setup vm pipeline\n");
rc = -EINVAL;
goto fail;
}
vm_info = info->vm_info;
#ifdef CONFIG_ARCH_QTI_VM
mem_cookie = gh_mem_notifier_register(GH_MEM_NOTIFIER_TAG_TOUCH,
fts_vm_mem_on_lend_handler, info);
if (!mem_cookie) {
pr_err("Failed to register on lend mem notifier\n");
rc = -EINVAL;
goto init_fail;
}
vm_info->mem_cookie = mem_cookie;
rc = gh_irq_wait_for_lend_v2(vm_info->irq_label, GH_PRIMARY_VM,
&fts_vm_irq_on_lend_callback, info);
atomic_set(&vm_info->tvm_owns_irq, 0);
atomic_set(&vm_info->tvm_owns_iomem, 0);
init_completion(&info->resource_checkpoint);
#else
mem_cookie = gh_mem_notifier_register(GH_MEM_NOTIFIER_TAG_TOUCH,
fts_vm_mem_on_release_handler, info);
if (!mem_cookie) {
pr_err("Failed to register on release mem notifier\n");
rc = -EINVAL;
goto init_fail;
}
vm_info->mem_cookie = mem_cookie;
atomic_set(&vm_info->pvm_owns_irq, 1);
atomic_set(&vm_info->pvm_owns_iomem, 1);
#endif
return rc;
init_fail:
fts_vm_deinit(info);
fail:
return rc;
}
static void fts_dt_parse_trusted_touch_info(struct fts_ts_info *info)
{
struct device_node *np = info->client->dev.of_node;
int rc = 0;
const char *selection;
const char *environment;
rc = of_property_read_string(np, "st,trusted-touch-mode",
&selection);
if (rc) {
dev_warn(&info->client->dev,
"%s: No trusted touch mode selection made\n", __func__);
}
if (!strcmp(selection, "vm_mode")) {
atomic_set(&info->trusted_touch_mode, TRUSTED_TOUCH_VM_MODE);
pr_err("Selected trusted touch mode to VM mode\n");
} else {
atomic_set(&info->trusted_touch_mode, TRUSTED_TOUCH_MODE_NONE);
pr_err("Invalid trusted_touch mode\n");
}
rc = of_property_read_string(np, "st,touch-environment",
&environment);
if (rc) {
dev_warn(&info->client->dev,
"%s: No trusted touch mode environment\n", __func__);
}
info->touch_environment = environment;
pr_err("Trusted touch environment:%s\n",
info->touch_environment);
}
static void fts_trusted_touch_init(struct fts_ts_info *info)
{
int rc = 0;
atomic_set(&info->trusted_touch_initialized, 0);
init_completion(&info->trusted_touch_powerdown);
fts_dt_parse_trusted_touch_info(info);
/* Get clocks */
info->core_clk = devm_clk_get(info->client->dev.parent,
"m-ahb");
if (IS_ERR(info->core_clk)) {
info->core_clk = NULL;
dev_warn(&info->client->dev,
"%s: core_clk is not defined\n", __func__);
}
info->iface_clk = devm_clk_get(info->client->dev.parent,
"se-clk");
if (IS_ERR(info->iface_clk)) {
info->iface_clk = NULL;
dev_warn(&info->client->dev,
"%s: iface_clk is not defined\n", __func__);
}
if (atomic_read(&info->trusted_touch_mode) == TRUSTED_TOUCH_VM_MODE) {
rc = fts_vm_init(info);
if (rc)
pr_err("Failed to init VM\n");
}
atomic_set(&info->trusted_touch_initialized, 1);
}
static ssize_t fts_trusted_touch_enable_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info;
if (!client)
return scnprintf(buf, PAGE_SIZE, "client is null\n");
info = i2c_get_clientdata(client);
if (!info) {
logError(0, "info is null\n");
return scnprintf(buf, PAGE_SIZE, "info is null\n");
}
return scnprintf(buf, PAGE_SIZE, "%d",
atomic_read(&info->trusted_touch_enabled));
}
static ssize_t fts_trusted_touch_enable_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info;
unsigned long value;
int err = 0;
if (!client)
return -EIO;
info = i2c_get_clientdata(client);
if (!info) {
logError(0, "info is null\n");
return -EIO;
}
if (count > 2)
return -EINVAL;
err = kstrtoul(buf, 10, &value);
if (err != 0)
return err;
if (!atomic_read(&info->trusted_touch_initialized))
return -EIO;
#ifdef CONFIG_ARCH_QTI_VM
err = fts_handle_trusted_touch_tvm(info, value);
if (err) {
pr_err("Failed to handle trusted touch in tvm\n");
return -EINVAL;
}
#else
err = fts_handle_trusted_touch_pvm(info, value);
if (err) {
pr_err("Failed to handle trusted touch in pvm\n");
return -EINVAL;
}
#endif
err = count;
return err;
}
#endif
//struct chipInfo ftsInfo;
/**
* #ifdef PHONE_GESTURE
* extern struct mutex gestureMask_mutex;
* #endif
*/
static char tag[8] = "[ FTS ]\0";
static char fts_ts_phys[64];
static u32 typeOfComand[CMD_STR_LEN] = {0};
static int numberParameters;
#ifdef USE_ONE_FILE_NODE
static int feature_feasibility = ERROR_OP_NOT_ALLOW;
#endif
#ifdef PHONE_GESTURE
static u8 mask[GESTURE_MASK_SIZE + 2];
//extern u16 gesture_coordinates_x[GESTURE_COORDS_REPORT_MAX];
//extern u16 gesture_coordinates_y[GESTURE_COORDS_REPORT_MAX];
//extern int gesture_coords_reported;
//extern struct mutex gestureMask_mutex;
#ifdef USE_CUSTOM_GESTURES
static int custom_gesture_res;
#endif
#endif
#ifdef USE_NOISE_PARAM
static u8 noise_params[NOISE_PARAMETERS_SIZE] = {0};
#endif
static void fts_interrupt_enable(struct fts_ts_info *info);
static int fts_init_afterProbe(struct fts_ts_info *info);
static int fts_mode_handler(struct fts_ts_info *info, int force);
static int fts_command(struct fts_ts_info *info, unsigned char cmd);
static int fts_chip_initialization(struct fts_ts_info *info);
static int fts_enable_reg(struct fts_ts_info *info, bool enable);
static struct drm_panel *active_panel;
void touch_callback(unsigned int status)
{
/* Empty */
}
unsigned int le_to_uint(const unsigned char *ptr)
{
return (unsigned int) ptr[0] + (unsigned int) ptr[1] * 0x100;
}
unsigned int be_to_uint(const unsigned char *ptr)
{
return (unsigned int) ptr[1] + (unsigned int) ptr[0] * 0x100;
}
void release_all_touches(struct fts_ts_info *info)
{
unsigned int type = MT_TOOL_FINGER;
int i;
for (i = 0; i < TOUCH_ID_MAX; i++) {
#ifdef STYLUS_MODE
if (test_bit(i, &info->stylus_id))
type = MT_TOOL_PEN;
#endif
input_mt_slot(info->input_dev, i);
input_mt_report_slot_state(info->input_dev, type, 0);
input_report_abs(info->input_dev, ABS_MT_TRACKING_ID, -1);
}
input_sync(info->input_dev);
info->touch_id = 0;
#ifdef STYLUS_MODE
info->stylus_id = 0;
#endif
}
/************************* FW UPGGRADE *********************************/
/* update firmware*/
/**
* echo 01/00 > fwupdate perform a fw update taking the FW to burn always
* from a bin file stored in /system/etc/firmware, 01= force the FW update
* whicheve fw_version and config_id; 00=perform a fw update only if the fw
* in the file has a greater fw_version or config_id
*/
/**
* cat fwupdate to show the result of the burning procedure
* (example output in the terminal = "AA00000001BB" if the switch is enabled)
*/
/**
* echo 01/00 > fwupdate; cat fwupdate to perform both operation stated before
* in just one call
*/
static ssize_t fts_fwupdate_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
int ret, mode;
/*const struct firmware *fw = NULL;*/
/*char *firmware_name = "st_fts.bin";*/
struct Firmware fwD;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
int orig_size;
u8 *orig_data;
/* reading out firmware upgrade mode */
ret = kstrtoint(buf, 10, &mode);
if (ret != 0) {
pr_err("%s: ret = %d\n", __func__, ret);
return -EINVAL;
}
fwD.data = NULL;
ret = getFWdata_nocheck(PATH_FILE_FW, &orig_data, &orig_size, 0);
if (ret < OK) {
logError(1, "%s %s: impossible retrieve FW... ERROR %08X\n",
tag, __func__, ERROR_MEMH_READ);
ret = (ret | ERROR_MEMH_READ);
goto END;
}
ret = parseBinFile(orig_data, orig_size, &fwD, !mode);
if (ret < OK) {
logError(1, "%s %s: impossible parse ERROR %08X\n",
tag, __func__, ERROR_MEMH_READ);
ret = (ret | ERROR_MEMH_READ);
goto END;
}
logError(0, "%s Starting flashing procedure...\n", tag);
ret = flash_burn(&fwD, mode, !mode);
if (ret < OK && ret != (ERROR_FW_NO_UPDATE | ERROR_FLASH_BURN_FAILED))
logError(0, "%s flashProcedure: ERROR %02X\n",
tag, ERROR_FLASH_PROCEDURE);
logError(0, "%s flashing procedure Finished!\n", tag);
END:
kfree(fwD.data);
info->fwupdate_stat = ret;
if (ret < OK)
logError(1, "%s %s Unable to upgrade firmware! ERROR %08X\n",
tag, __func__, ret);
return count;
}
static ssize_t fts_fwupdate_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
//fwupdate_stat: ERROR code Returned by flashProcedure.
return snprintf(buf, PAGE_SIZE, "AA%08XBB\n", info->fwupdate_stat);
}
/****UTILITIES (current fw_ver/conf_id, active mode, file fw_ver/conf_id)****/
/**
* cat appid show on the terminal fw_version.config_id of
* the FW running in the IC
*/
static ssize_t fts_appid_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int error;
error = snprintf(buf, PAGE_SIZE, "%x.%x\n", ftsInfo.u16_fwVer,
ftsInfo.u16_cfgId);
return error;
}
/**
* cat mode_active to show the bitmask of which indicate the modes/features
* which are running on the IC in a specific istant oftime (example output in
* the terminal = "AA10000000BB" only senseOn performed)
*/
static ssize_t fts_mode_active_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
logError(1, "%s Current mode active = %08X\n", tag, info->mode);
//return sprintf(buf, "AA%08XBB\n", info->mode);
return snprintf(buf, PAGE_SIZE, "AA%08XBB\n", info->mode);
}
/**
* cat fw_file_test show on the terminal fw_version and config_id of the FW
* stored in the fw file/header file
*/
static ssize_t fts_fw_test_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Firmware fw;
int ret;
fw.data = NULL;
ret = readFwFile(PATH_FILE_FW, &fw, 0);
if (ret < OK)
logError(1, "%s Error during reading FW file! ERROR %08X\n",
tag, ret);
else {
logError(1, "%s fw_version = %04X, config_version = %04X, ",
tag, fw.fw_ver, fw.config_id);
logError(1, "size = %dbytes\n", fw.data_size);
}
kfree(fw.data);
return 0;
}
/**
* cat lockdown_info to show the lockdown info on the terminal
* (example output in the terminal = "AA00000000X1X2..X10BB" )
* where first 4 bytes correspond t
*/
static ssize_t fts_lockdown_info_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
u8 data[LOCKDOWN_CODE_SIZE] = {0};
int ret, size = 100;
char buff[CMD_STR_LEN] = {0};
char all_strbuff[100] = {0};
ret = fts_disableInterrupt();
if (ret < OK)
goto END;
ret = lockDownInfo((u8 *)data, LOCKDOWN_CODE_SIZE);
if (ret < OK)
goto END;
END:
ret |= fts_enableInterrupt();
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", ret);
strlcat(all_strbuff, buff, size);
if (ret >= OK) {
for (ret = 0; ret < LOCKDOWN_CODE_SIZE; ret++) {
snprintf(buff, sizeof(buff), "%02X", data[ret]);
strlcat(all_strbuff, buff, size);
}
} else {
logError(1, "%s Error while reading lockdown info = %08X\n",
tag, ret);
}
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
return snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
}
/**
* cat strength_frame to obtain strength data
* the string returned in the shell is made up as follow:
* AA = start byte
* X1X2X3X4 = 4 bytes in HEX format which represent an
* error code (00000000 no error)
*
* if error code is all 0s
* FF = 1 byte in HEX format number of rows
* SS = 1 byte in HEX format number of columns
* N1, ... = the decimal value of each node separated by a coma
*
* BB = end byte
*/
static ssize_t fts_strength_frame_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
/*unsigned int temp;*/
/*int res;*/
/*struct i2c_client *client = to_i2c_client(dev); */
/*struct fts_ts_info *info = i2c_get_clientdata(client); */
if (sscanf(p, "%x ", &typeOfComand[0]) != 1)
return -EINVAL;
logError(1, "%s %s: Type of Strength Frame selected: %d\n", tag,
__func__, typeOfComand[0]);
return count;
}
static ssize_t fts_strength_frame_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct MutualSenseFrame frame;
int res = ERROR_OP_NOT_ALLOW, j, size = 6*2;
int count = 0;
u16 type = 0;
char *all_strbuff = NULL;
char buff[CMD_STR_LEN] = {0};
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
frame.node_data = NULL;
res = fts_disableInterrupt();
if (res < OK)
goto END;
res = senseOn();
#ifdef PHONE_KEY
res = keyOn();
#endif
if (res < OK) {
logError(1, "%s %s: could not start scanning! ERROR %08X\n",
tag, __func__, res);
goto END;
}
msleep(WAIT_FOR_FRESH_FRAMES);
res = senseOff();
#ifdef PHONE_KEY
res = keyOff();
#endif
if (res < OK) {
logError(1, "%s %s: could not finish scanning! ERROR %08X\n",
tag, __func__, res);
goto END;
}
/* mdelay(WAIT_AFTER_SENSEOFF); */
msleep(WAIT_AFTER_SENSEOFF);
flushFIFO();
switch (typeOfComand[0]) {
case 1:
type = ADDR_NORM_TOUCH;
break;
#ifdef PHONE_KEY
case 2:
type = ADDR_NORM_MS_KEY;
break;
#endif
default:
logError(1, "%s %s: Strength type %d not valid! ERROR %08X\n",
tag, __func__, typeOfComand[0], ERROR_OP_NOT_ALLOW);
res = ERROR_OP_NOT_ALLOW;
goto END;
}
res = getMSFrame(type, &frame, 0);
if (res < OK) {
logError(1, "%s %s: could not get the frame! ERROR %08X\n",
tag, __func__, res);
goto END;
} else {
size += (res * 6);
logError(0, "%s The frame size is %d words\n", tag, res);
res = OK;
print_frame_short("MS Strength frame =",
array1dTo2d_short(frame.node_data,
frame.node_data_size,
frame.header.sense_node),
frame.header.force_node,
frame.header.sense_node);
}
END:
flushFIFO();
release_all_touches(info);
fts_mode_handler(info, 1);
all_strbuff = kmalloc_array(size, sizeof(char), GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", res);
strlcat(all_strbuff, buff, size);
if (res >= OK) {
snprintf(buff, sizeof(buff), "%02X",
(u8) frame.header.force_node);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X",
(u8) frame.header.sense_node);
strlcat(all_strbuff, buff, size);
for (j = 0; j < frame.node_data_size; j++) {
snprintf(buff, sizeof(buff), "%d,",
frame.node_data[j]);
strlcat(all_strbuff, buff, size);
}
kfree(frame.node_data);
}
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1, "%s %s: Unable toallocate all_strbuff!ERROR %08X\n",
tag, ERROR_ALLOC);
}
fts_enableInterrupt();
return count;
}
/********** FEATURES *********************/
/**
* TODO: edit this function according to the features policy to
* allow during the screen on/off, following is shown an example
* but check always with ST for more details
*/
int check_feature_feasibility(struct fts_ts_info *info, unsigned int feature)
{
int res = OK;
/**
* Example based on the status of the screen and
* on the feature that is trying to enable
*/
/*Example based only on the feature that is going to be activated*/
switch (feature) {
case FEAT_GESTURE:
if (info->cover_enabled == 1) {
res = ERROR_OP_NOT_ALLOW;
logError(1, "%s %s:Feature not allowed when in Cover ",
tag, __func__);
logError(1, "mode %08X\n", res);
/**
* for example here can be place a code for
* disabling the cover mode when gesture is
* activated
*/
}
break;
case FEAT_COVER:
if (info->gesture_enabled == 1) {
res = ERROR_OP_NOT_ALLOW;
/*logError(1,"Feature not allowed*/
/*when Gestures enabled!");*/
logError(1, "s %s: Feature not allowed when Gestures ",
tag, __func__);
logError(1, "enabled%08X\n", res);
/**
* for example here can be place a code for
* disabling the gesture mode when cover is
* activated (that means that cover mode has
* an higher priority on gesture mode)
*/
}
break;
default:
logError(1, "%s %s: Feature Allowed!\n", tag, __func__);
}
return res;
}
#ifdef USE_ONE_FILE_NODE
/**
* echo XXXX 00/01 > feature_enable
* set the feature to disable/enable.
* XXXX = 4 bytes which identify the feature
*
* cat feature_enable
* set the enabled mode/features in the IC
* and return an error code
*
* echo XXXX 00/01 > feature_enable;
* cat feature_enable to perform both action stated
* before in just one call
*/
static ssize_t fts_feature_enable_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
char *p = (char *)buf;
unsigned int temp;
int res = OK;
if ((count - 8 + 1) / 3 != 1) {
logError(1, "%s fts_feature_enable: ", tag);
logError(1, "Number of parameter wrong! %d > %d\n",
(count - 8 + 1) / 3, 1);
return -EINVAL;
}
if (sscanf(p, "%08X ", &temp) != 1)
return -EINVAL;
p += 9;
res = check_feature_feasibility(info, temp);
if (res < OK)
return -EINVAL;
switch (temp) {
#ifdef PHONE_GESTURE
case FEAT_GESTURE:
if (sscanf(p, "%02X ", &info->gesture_enabled) != 1)
return -EINVAL;
logError(1, "%s fts_feature_enable: Gesture Enabled = %d\n",
tag, info->gesture_enabled);
break;
#endif
#ifdef GLOVE_MODE
case FEAT_GLOVE:
if (sscanf(p, "%02X ", &info->glove_enabled) != 1)
return -EINVAL;
logError(1, "%s fts_feature_enable: Glove Enabled = %d\n",
tag, info->glove_enabled);
break;
#endif
#ifdef STYLUS_MODE
case FEAT_STYLUS:
if (sscanf(p, "%02X ", &info->stylus_enabled) != 1)
return -EINVAL;
logError(1, "%s fts_feature_enable: Stylus Enabled = %d\n",
tag, info->stylus_enabled);
break;
#endif
#ifdef COVER_MODE
case FEAT_COVER:
if (sscanf(p, "%02X ", &info->cover_enabled) != 1)
return -EINVAL;
logError(1, "%s fts_feature_enable: Cover Enabled = %d\n",
tag, info->cover_enabled);
break;
#endif
#ifdef CHARGER_MODE
case FEAT_CHARGER:
if (sscanf(p, "%02X ", &info->charger_enabled) != 1)
return -EINVAL;
logError(1, "%s fts_feature_enable: Charger Enabled= %d\n",
tag, info->charger_enabled);
break;
#endif
#ifdef VR_MODE
case FEAT_VR:
if (sscanf(p, "%02X ", &info->vr_enabled) != 1)
return -EINVAL;
logError(1, "%s fts_feature_enable: VR Enabled = %d\n",
tag, info->vr_enabled);
break;
#endif
#ifdef EDGE_REJ
case FEAT_EDGE_REJECTION:
if (sscanf(p, "%02X ", &info->edge_rej_enabled) != 1)
return -EINVAL;
logError(1, "%s %s: Edge Rejection Enabled= %d\n",
tag, __func__, info->edge_rej_enabled);
break;
#endif
#ifdef CORNER_REJ
case FEAT_CORNER_REJECTION:
if (sscanf(p, "%02X ", &info->corner_rej_enabled) != 1)
return -EINVAL;
logError(1, "%s %s: Corner Rejection Enabled= %d\n",
tag, __func__, info->corner_rej_enabled);
break;
#endif
#ifdef EDGE_PALM_REJ
case FEAT_EDGE_PALM_REJECTION:
if (sscanf(p, "%02X", &info->edge_palm_rej_enabled) != 1)
return -EINVAL;
logError(1, "%s %s:Edge Palm RejectionEnabled= %d\n",
tag, __func__, info->edge_palm_rej_enabled);
break;
#endif
default:
logError(1, "%s %s: Feature %08X not valid! ERROR %08X\n",
tag, __func__, temp, ERROR_OP_NOT_ALLOW);
res = ERROR_OP_NOT_ALLOW;
}
feature_feasibility = res;
if (feature_feasibility >= OK)
feature_feasibility = fts_mode_handler(info, 1);
else {
logError(1, "%s %s: Call echo XXXX 00/01 > feature_enable ",
tag, __func__);
logError(1, "with a correct feature! ERROR %08X\n", res);
}
return count;
}
static ssize_t fts_feature_enable_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0;
if (feature_feasibility < OK) {
logError(1,
"%s %s:Call before echo 00/01 > feature_enable %08X\n",
tag, __func__, feature_feasibility);
}
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", feature_feasibility);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1,
"%s %s: Unable to allocate all_strbuff! ERROR %08X\n",
tag, __func__, ERROR_ALLOC);
}
feature_feasibility = ERROR_OP_NOT_ALLOW;
return count;
}
#else
#ifdef EDGE_REJ
/**
* echo 01/00 > edge_rej to enable/disable edge rejection
* cat edge_rej to show the status of the edge_rej_enabled
* switch (example output in the terminal = "AA00000001BB"
* if the switch is enabled)
*
* echo 01/00 > edge_rej; cat edge_rej to enable/disable
* edge rejection and see the switch status in just one call
*/
static ssize_t fts_edge_rej_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
logError(0, "%s %s: edge_rej_enabled = %d\n",
tag, __func__, info->edge_rej_enabled);
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", info->edge_rej_enabled);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else
logError(1,
"%s %s: Unable to allocate all_strbuff! ERROR %08X\n",
tag, __func__, ERROR_ALLOC);
return count;
}
static ssize_t fts_edge_rej_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
unsigned int temp;
int res;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
/**
* in case of a different elaboration of the input,
* just modify this initial part of the code
*/
if ((count + 1) / 3 != 1) {
logError(1,
"%s %s:Number bytes of parameter wrong!%d != %d byte\n",
tag, __func__, (count + 1) / 3, 1);
return -EINVAL;
}
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
/**
* this is a standard code that should be always
* used when a feature is enabled!
*
* first step : check if the wanted feature can be enabled
*
* second step: call fts_mode_handler to actually enable it
* NOTE: Disabling a feature is always allowed by default
*/
res = check_feature_feasibility(info, FEAT_EDGE_REJECTION);
if (res < OK && temp != FEAT_DISABLE)
return -EINVAL;
info->edge_rej_enabled = temp;
res = fts_mode_handler(info, 1);
if (res < OK) {
logError(1,
"%s %s: Error during fts_mode_handler! ERROR %08X\n",
tag, __func__, res);
}
}
return count;
}
#endif
#ifdef CORNER_REJ
/**
* echo 01/00 > corner_rej to enable/disable corner rejection
* cat corner_rej to show the status of the
* corner_rej_enabled switch (example output in the terminal
* = "AA00000001BB" if the switch is enabled)
*
* echo 01/00 > corner_rej; cat corner_rej to enable/disable
* corner rejection and see the switch status in just one call
*/
static ssize_t fts_corner_rej_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
logError(0, "%s %s: corner_rej_enabled = %d\n",
tag, __func__, info->corner_rej_enabled);
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", info->corner_rej_enabled);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1, "%s%s:Unable to allocate all_strbuff! ERROR %08X\n",
tag, __func__, ERROR_ALLOC);
}
return count;
}
static ssize_t fts_corner_rej_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
unsigned int temp;
int res;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
/**
* in case of a different elaboration of the input,
* just modify this initial part of the code according
* to customer needs
*/
if ((count + 1) / 3 != 1) {
logError(1,
"%s %s:Number bytes of parameter wrong!%d != %d byte\n",
tag, __func__, (count + 1) / 3, 1);
return -EINVAL;
}
/*sscanf(p, "%02X ", &temp);*/
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
/**
* this is a standard code that should be always
* used when a feature is enabled!
*
* first step : check if the wanted feature
* can be enabled
*
* second step: call fts_mode_handler to
* actually enable it
*
* NOTE: Disabling a feature is always
* allowed by default
*/
res = check_feature_feasibility(info, FEAT_CORNER_REJECTION);
if (res >= OK || temp == FEAT_DISABLE) {
info->corner_rej_enabled = temp;
res = fts_mode_handler(info, 1);
if (res < OK) {
logError(1,
"%s %s: During fts_mode_handler!ERROR %08X\n",
tag, __func__, res);
}
}
return count;
}
#endif
#ifdef EDGE_PALM_REJ
/**
* echo 01/00 > edge_palm_rej
* to enable/disable edge palm rejection
*
* cat edge_palm_rej to show the status of the
* edge_palm_rej_enabled switch (example output
* in the terminal = "AA00000001BB" if the switch is enabled)
*
* echo 01/00 > edge_palm_rej; cat edge_palm_rej
* to enable/disable edge palm rejection and see
* the switch status in just one call
*/
static ssize_t fts_edge_palm_rej_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
logError(0, "%s %s: edge_palm_rej_enabled = %d\n",
tag, __func__, info->edge_palm_rej_enabled);
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X",
info->edge_palm_rej_enabled);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n",
all_strbuff);
kfree(all_strbuff);
} else {
logError(1, "%s%s:Unable to allocate all_strbuff! %08X\n",
tag, __func__, ERROR_ALLOC);
}
return count;
}
static ssize_t fts_edge_palm_rej_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
unsigned int temp;
int res;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
/**
* in case of a different elaboration of the input,
* just modify this initial part of the code according
* to customer needs
*/
if ((count + 1) / 3 != 1) {
logError(1,
"%s%s:Number bytes of parameter wrong! %d != %d byte\n",
tag, __func__, (count + 1) / 3, 1);
return -EINVAL;
}
/*sscanf(p, "%02X ", &temp);*/
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
/**
* this is a standard code that should be
* always used when a feature is enabled!
*
* first step : check if the wanted feature can be enabled
*
* second step: call fts_mode_handler to actually enable it
*
* NOTE: Disabling a feature is always allowed by default
*/
res = check_feature_feasibility(info, FEAT_EDGE_PALM_REJECTION);
if (res >= OK || temp == FEAT_DISABLE) {
info->edge_palm_rej_enabled = temp;
res = fts_mode_handler(info, 1);
if (res < OK) {
logError(1, "%s%s:Error in fts_mode_handler!%08X\n",
tag, __func__, res);
}
}
return count;
}
#endif
#ifdef CHARGER_MODE
/**
* echo 01/00 > charger_mode to enable/disable charger mode
*
* cat charger_mode to show the status of
* the charger_enabled switch (example output in the terminal
* = "AA00000001BB" if the switch is enabled)
*
* echo 01/00 > charger_mode; cat charger_mode
* to enable/disable charger mode and see the
* switch status in just one call
*/
static ssize_t fts_charger_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
logError(0, "%s %s:charger_enabled = %d\n",
tag, __func__, info->charger_enabled);
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", info->charger_enabled);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1, "%s %s:Unable to allocate all_strbuff! %08X\n",
tag, __func__, ERROR_ALLOC);
}
return count;
}
static ssize_t fts_charger_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
unsigned int temp;
int res;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
/**
* in case of a different elaboration of the input,
* just modify this initial part of the code
* according to customer needs
*/
if ((count + 1) / 3 != 1) {
logError(1, "%s %s:Size of parameter wrong! %d != %d byte\n",
tag, __func__, (count + 1) / 3, 1);
return -EINVAL;
}
/*sscanf(p, "%02X ", &temp);*/
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
/**
* this is a standard code that should be always
* used when a feature is enabled!
*
* first step : check if the wanted feature
* can be enabled
* second step: call fts_mode_handler to
* actually enable it
*
* NOTE: Disabling a feature is always
* allowed by default
*/
res = check_feature_feasibility(info, FEAT_CHARGER);
if (res >= OK || temp == FEAT_DISABLE) {
info->charger_enabled = temp;
res = fts_mode_handler(info, 1);
if (res < OK) {
logError(1, "%s %s: Error during fts_mode_handler! ",
tag, __func__);
logError(1, "ERROR %08X\n", res);
}
}
return count;
}
#endif
#ifdef GLOVE_MODE
/**
* echo 01/00 > glove_mode
* to enable/disable glove mode
*
* cat glove_mode to show the status of
* the glove_enabled switch (example output in the
* terminal = "AA00000001BB" if the switch is enabled)
*
* echo 01/00 > glove_mode; cat glove_mode
* to enable/disable glove mode and see the
* switch status in just one call
*/
static ssize_t fts_glove_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
logError(0, "%s %s:glove_enabled = %d\n",
tag, __func__, info->glove_enabled);
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", info->glove_enabled);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1, "%s %s:Unable to allocate all_strbuff! %08X\n",
tag, __func__, ERROR_ALLOC);
}
return count;
}
static ssize_t fts_glove_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
unsigned int temp;
int res;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
/**
* in case of a different elaboration of the input,
* just modify this initial part of the code
* according to customer needs
*/
if ((count + 1) / 3 != 1) {
logError(1, "%s %s:Size of parameter wrong! %d != %d byte\n",
tag, __func__, (count + 1) / 3, 1);
return -EINVAL;
}
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
/**
* this is a standard code that should be
* always used when a feature is enabled!
*
* first step : check if the wanted feature can be enabled
*
* second step: call fts_mode_handler to actually enable it
*
* NOTE: Disabling a feature is always allowed by default
*/
res = check_feature_feasibility(info, FEAT_GLOVE);
if (res >= OK || temp == FEAT_DISABLE) {
info->glove_enabled = temp;
res = fts_mode_handler(info, 1);
if (res < OK) {
logError(1, "%s %s: Error during fts_mode_handler! ",
tag, __func__);
logError(1, "ERROR %08X\n", res);
}
}
return count;
}
#endif
#ifdef VR_MODE
/**
* echo 01/00 > vr_mode to enable/disable vr mode
*
* cat vr_mode to show the status of
* the vr_enabled switch (example output in the
* terminal = "AA00000001BB" if the switch is enabled)
*
* echo 01/00 > vr_mode; cat vr_mode to enable/disable
* vr mode and see the switch status in just one call
*/
static ssize_t fts_vr_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
logError(0, "%s %s: vr_enabled = %d\n",
tag, __func__, info->vr_enabled);
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", info->vr_enabled);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1,
"%s %s: Unable to allocate all_strbuff! ERROR %08X\n",
tag, __func__, ERROR_ALLOC);
}
return count;
}
static ssize_t fts_vr_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
unsigned int temp;
int res;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
/**
* in case of a different elaboration of the input,
* just modify this initial part of the code
* according to customer needs
*/
if ((count + 1) / 3 != 1) {
logError(1,
"%s %s:Number bytes of parameter wrong!%d != %d byte\n",
tag, __func__, (count + 1) / 3, 1);
return -EINVAL;
}
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
/**
* this is a standard code that should be always
* used when a feature is enabled!
*
* first step : check if the wanted feature can be enabled
* second step: call fts_mode_handler to actually enable it
*
* NOTE: Disabling a feature is always allowed by default
*/
res = check_feature_feasibility(info, FEAT_VR);
if (res >= OK || temp == FEAT_DISABLE) {
info->vr_enabled = temp;
res = fts_mode_handler(info, 1);
if (res < OK) {
logError(1, "%s %s: Error in fts_mode_handler!%08X\n",
tag, __func__, res);
}
}
return count;
}
#endif
#ifdef COVER_MODE
/**
* echo 01/00 > cover_mode to enable/disable cover mode
* cat cover_mode to show the status of the
* cover_enabled switch (example output in the
* terminal = "AA00000001BB" if the switch is enabled)
*
* echo 01/00 > cover_mode; cat cover_mode to
* enable/disable cover mode and see the switch
* status in just one call
*
* NOTE: the cover can be handled also using a notifier,
* in this case the body of these functions
* should be copied in the notifier callback
*/
static ssize_t fts_cover_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
logError(0, "%s %s: cover_enabled = %d\n",
tag, __func__, info->cover_enabled);
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", info->cover_enabled);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1,
"%s %s:Unable to allocate all_strbuff! ERROR %08X\n",
tag, __func__, ERROR_ALLOC);
}
return count;
}
static ssize_t fts_cover_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
unsigned int temp;
int res;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
/**
* in case of a different elaboration of the input,
* just modify this initial part of the code according
* to customer needs
*/
if ((count + 1) / 3 != 1) {
logError(1,
"%s %s:Number bytes of parameter wrong!%d != %d byte\n",
tag, __func__, (count + 1) / 3, 1);
return -EINVAL;
}
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
/**
* this is a standard code that should be
* always used when a feature is enabled!
*
* first step : check if the wanted feature can be enabled
* second step: call fts_mode_handler to actually enable it
* NOTE: Disabling a feature is always allowed by default
*/
res = check_feature_feasibility(info, FEAT_COVER);
if (res >= OK || temp == FEAT_DISABLE) {
info->cover_enabled = temp;
res = fts_mode_handler(info, 1);
if (res < OK) {
logError(1, "%s%s:Error in fts_mode_handler!%08X\n",
tag, __func__, res);
}
}
return count;
}
#endif
#ifdef STYLUS_MODE
/**
* echo 01/00 > stylus_mode to enable/disable stylus mode
* cat stylus_mode to show the status of
* the stylus_enabled switch (example output in the
* terminal = "AA00000001BB" if the switch is enabled)
*
* echo 01/00 > stylus_mode; cat stylus_mode to
* enable/disable stylus mode and see the
* switch status in just one call
*/
static ssize_t fts_stylus_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
logError(0, "%s %s: stylus_enabled = %d\n",
tag, __func__, info->stylus_enabled);
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", info->stylus_enabled);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1,
"%s %s: Unable to allocate all_strbuff! ERROR %08X\n",
tag, __func__, ERROR_ALLOC);
}
return count;
}
static ssize_t fts_stylus_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
unsigned int temp;
int res;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
/**
* in case of a different elaboration of the input,
* just modify this initial part of the code
* according to customer needs
*/
if ((count + 1) / 3 != 1) {
logError(1, "%s %s:Size of parameter wrong! %d != %d byte\n",
tag, __func__, (count + 1) / 3, 1);
return -EINVAL;
}
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
/**
* this is a standard code that should be
* always used when a feature is enabled!
*
* first step : check if the wanted feature can be enabled
* second step: call fts_mode_handler to actually enable it
* NOTE: Disabling a feature is always allowed by default
*/
res = check_feature_feasibility(info, FEAT_STYLUS);
if (res >= OK || temp == FEAT_DISABLE) {
info->stylus_enabled = temp;
res = fts_mode_handler(info, 1);
if (res < OK) {
logError(1,
"%s %s:Error during fts_mode_handler! %08X\n",
tag, __func__, res);
}
}
return count;
}
#endif
#endif
/************** GESTURES *************/
#ifdef PHONE_GESTURE
#ifdef USE_GESTURE_MASK
/**
* if this define is used, a gesture bit mask
* is used as method to select the gestures
* to enable/disable
*/
/**
* echo EE X1 X2 ... X8 > gesture_mask set
* the gesture mask to disable/enable;
* EE = 00(disable) or 01(enable);
* X1 ... X8 = gesture mask (example 06 00 ... 00
* this gesture mask represent the gestures with ID = 1 and 2)
* can be specified from 1 to 8 bytes, if less than 8 bytes
* are specified the remaining bytes are kept as previous settings
*
* cat gesture_mask enable/disable the given mask,
* if one or more gestures is enabled the driver will
* automatically enable the gesture mode.
* If all the gestures are disabled the driver
* automatically will disable the gesture mode.
* At the end an error code will be printed
* (example output in the terminal = "AA00000000BB"
* if there are no errors)
*
* echo EE X1 X2 ... X8 > gesture_mask;
* cat gesture_mask perform in one
* command both actions stated before
*/
static ssize_t fts_gesture_mask_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0, res, temp;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
if (mask[0] == 0) {
res = ERROR_OP_NOT_ALLOW;
logError(1, "%s %s:Call before echo enable/disable xx xx >",
tag, __func__);
logError(1, "%s %s: gesture_mask with a correct number of ",
tag, __func__);
logError(1, "parameters! ERROR %08X\n", res);
return -EINVAL;
}
if (mask[1] == FEAT_ENABLE || mask[1] == FEAT_DISABLE)
res = updateGestureMask(&mask[2], mask[0], mask[1]);
else
res = ERROR_OP_NOT_ALLOW;
if (res < OK) {
logError(1, "%s fts_gesture_mask_store: ERROR %08X\n",
tag, res);
}
res |= check_feature_feasibility(info, FEAT_GESTURE);
temp = isAnyGestureActive();
if (res >= OK || temp == FEAT_DISABLE)
info->gesture_enabled = temp;
logError(1, "%s fts_gesture_mask_store:Gesture Enabled = %d\n",
tag, info->gesture_enabled);
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", res);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1,
"%s %s:Unable to allocate all_strbuff! ERROR %08X\n",
tag, __func__, ERROR_ALLOC);
}
mask[0] = 0;
return count;
}
static ssize_t fts_gesture_mask_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
int n;
unsigned int temp;
if ((count + 1) / 3 > GESTURE_MASK_SIZE + 1) {
logError(1, "%s %s: Number of bytes of parameter wrong! ", tag,
__func__);
logError(1, "%d > (enable/disable + %d )\n", (count + 1) / 3,
GESTURE_MASK_SIZE);
mask[0] = 0;
return -EINVAL;
}
mask[0] = ((count + 1) / 3) - 1;
for (n = 1; n <= (count + 1) / 3; n++) {
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
mask[n] = (u8)temp;
logError(1, "%s mask[%d] = %02X\n", tag, n, mask[n]);
}
return count;
}
#else
/**
* if this define is not used,
* to select the gestures to enable/disable
* are used the IDs of the gestures
*
* echo EE X1 X2 ... > gesture_mask set
* the gesture to disable/enable; EE = 00(disable)
* or 01(enable); X1 ... = gesture IDs
* (example 01 02 05... represent the gestures with
* ID = 1, 2 and 5) there is no limit of the parameters
* that can be passed, but of course the gesture IDs
* should be valid (all the valid IDs are listed
* in ftsGesture.h)
*
* cat gesture_mask enable/disable the
* given gestures, if one or more gestures is enabled
* the driver will automatically enable the gesture mode.
* If all the gestures are disabled the driver automatically
* will disable the gesture mode. At the end an error code
* will be printed (example output in the terminal =
* "AA00000000BB" if there are no errors)
*
* echo EE X1 X2 ... > gesture_mask; cat gesture_mask
* perform in one command both actions stated before
*/
static ssize_t fts_gesture_mask_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
logError(0, "%s %s: gesture_enabled = %d\n", tag, __func__,
info->gesture_enabled);
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", info->gesture_enabled);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1,
"%s %s: Unable to allocate all_strbuff! ERROR %08X\n",
tag, __func__, ERROR_ALLOC);
}
return count;
}
static ssize_t fts_gesture_mask_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
int n;
unsigned int temp;
int res;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
if ((count + 1) / 3 < 2 || (count + 1) / 3 > GESTURE_MASK_SIZE + 1) {
logError(1,
"%s %s:Number bytes of parameter wrong! %d %d bytes)\n",
tag, __func__, (count + 1) / 3, GESTURE_MASK_SIZE);
mask[0] = 0;
return -EINVAL;
}
memset(mask, 0, GESTURE_MASK_SIZE + 2);
mask[0] = ((count + 1) / 3) - 1;
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
mask[1] = (u8)temp;
for (n = 1; n < (count + 1) / 3; n++) {
/*sscanf(p, "%02X ", &temp);*/
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
gestureIDtoGestureMask((u8)temp, &mask[2]);
}
for (n = 0; n < GESTURE_MASK_SIZE + 2; n++)
logError(1, "%s mask[%d] = %02X\n", tag, n, mask[n]);
if (mask[0] == 0) {
res = ERROR_OP_NOT_ALLOW;
logError(1, "%s %s: Call before echo enable/disable xx xx ....",
tag, __func__);
logError(1, " > gesture_mask with parameters! ERROR %08X\n",
res);
} else {
if (mask[1] == FEAT_ENABLE || mask[1] == FEAT_DISABLE)
res = updateGestureMask(&mask[2], mask[0], mask[1]);
else
res = ERROR_OP_NOT_ALLOW;
if (res < OK)
logError(1, "%s %s: ERROR %08X\n", tag, __func__, res);
}
res = check_feature_feasibility(info, FEAT_GESTURE);
temp = isAnyGestureActive();
if (res >= OK || temp == FEAT_DISABLE)
info->gesture_enabled = temp;
res = fts_mode_handler(info, 0);
return count;
}
#endif
#ifdef USE_CUSTOM_GESTURES
/**
* allow to use user defined gestures
*
* echo ID X1 Y1 X2 Y2 ... X30 Y30 >
* add_custom_gesture add a custom gesture;
* ID = 1 byte that represent the gesture ID of
* the custom gesture (can be chosen only between
* the custom IDs defined in ftsGesture.h);
* X1 Y1 ... = a series of 30 points (x,y) which
* represent the gesture template.
* The loaded gesture is enabled automatically
*
* cat add_custom_gesture/remove_custom_gesture
* Print the error code of the last operation
* performed with the custom gestures
* (example output in the terminal = "AA00000000BB"
* if there are no errors)
*
* echo ID X1 Y1 X2 Y2 ... X30 Y30 >
* add_custom_gesture; cat add_custom_gesture
* perform in one command both actions stated before
*/
static ssize_t fts_add_custom_gesture_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0;
logError(0, "%s %s:Last Operation Result = %08X\n",
tag, __func__, custom_gesture_res);
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", custom_gesture_res);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1,
"%s %s:Unable to allocate all_strbuff! ERROR %08X\n",
tag, __func__, ERROR_ALLOC);
}
return count;
}
static ssize_t fts_add_custom_gesture_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
int n;
unsigned int temp;
u8 gestureID;
u8 gestMask[GESTURE_MASK_SIZE] = {0};
u8 template[GESTURE_CUSTOM_POINTS];
int res;
/*struct i2c_client *client = to_i2c_client(dev);*/
/*struct fts_ts_info *info = i2c_get_clientdata(client);*/
if ((count + 1) / 3 != GESTURE_CUSTOM_POINTS + 1) {
logError(1,
"%s %s: Number bytes of parameter wrong! %d != %d\n",
tag, __func__, (count + 1) / 3,
GESTURE_CUSTOM_POINTS + 1);
res = ERROR_OP_NOT_ALLOW;
return -EINVAL;
}
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
gestureID = (u8)temp;
for (n = 1; n < (count + 1) / 3; n++) {
/*sscanf(p, "%02X ", &temp);*/
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
template[n-1] = (u8)temp;
logError(1, "%s template[%d] = %02X\n",
tag, n-1, template[n-1]);
}
res = fts_disableInterrupt();
if (res >= OK) {
logError(1, "%s %s: Adding custom gesture ID = %02X\n",
tag, __func__, gestureID);
res = addCustomGesture(template,
GESTURE_CUSTOM_POINTS, gestureID);
if (res < OK) {
logError(1,
"%s %s:error during add custom gesture ",
tag, __func__);
logError(1, "ERROR %08X\n", res);
} else {
logError(1,
"%s %s:Enabling in the gesture mask...\n",
tag, __func__);
gestureIDtoGestureMask(gestureID, gestMask);
res = enableGesture(gestMask, GESTURE_MASK_SIZE);
if (res < OK) {
logError(1, "%s %s:error during enable gesture",
tag, __func__);
logError(1, " mask: ERROR %08X\n", res);
} else {
/*if (check_feature_feasibility(info,*/
/*FEAT_GESTURE)==OK)*/
/*info->gesture_enabled =*/
/*isAnyGestureActive();*/
/*uncomment if you want to activate*/
/* automatically*/
/*the gesture mode when a custom gesture*/
/*is loaded*/
logError(1, "%s %s:Custom Gesture enabled!\n",
tag, __func__, res);
}
}
}
res |= fts_enableInterrupt();
custom_gesture_res = res;
return count;
}
/**
* echo ID > remove_custom_gesture
* remove a custom gesture;
* ID = 1 byte that represent the gesture ID
* of the custom gesture (can be chosen only
* between the custom IDs defined in ftsGesture.h);
* the same gesture is disabled automatically
*/
static ssize_t fts_remove_custom_gesture_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
u8 *all_strbuff = NULL;
int count = 0;
logError(0, "%s %s:Last Operation Result = %08X\n",
tag, __func__, custom_gesture_res);
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", custom_gesture_res);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1,
"%s %s:Unable to allocate all_strbuff! ERROR %08X\n",
tag, __func__, ERROR_ALLOC);
}
return count;
}
static ssize_t fts_remove_custom_gesture_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
char *p = (char *)buf;
unsigned int temp;
int res;
u8 gestureID;
u8 gestMask[GESTURE_MASK_SIZE] = {0};
/*struct i2c_client *client = to_i2c_client(dev);*/
/*struct fts_ts_info *info = i2c_get_clientdata(client);*/
if ((count + 1) / 3 < 1) {
logError(1,
"%s %s:Number bytes of parameter wrong! %d != %d\n",
tag, __func__, (count + 1) / 3, 1);
res = ERROR_OP_NOT_ALLOW;
return -EINVAL;
}
if (sscanf(p, "%02X ", &temp) != 1)
return -EINVAL;
p += 3;
gestureID = (u8)temp;
res = fts_disableInterrupt();
if (res >= OK) {
logError(1,
"%s %s: Removing custom gesture ID = %02X\n",
tag, __func__, gestureID);
res = removeCustomGesture(gestureID);
if (res < OK) {
logError(1,
"%s %s:error in custom gesture:%08X\n",
tag, __func__, res);
} else {
logError(1, "%s %s: Enabling in the gesture mask...\n",
tag, __func__);
gestureIDtoGestureMask(gestureID, gestMask);
res = disableGesture(gestMask, GESTURE_MASK_SIZE);
if (res < OK) {
logError(1,
"%s %s:error in enable gesture mask:%08X\n",
tag, __func__, res);
} else {
/*if (check_feature_feasibility*/
/*(info,FEAT_GESTURE)==OK)*/
/*info->gesture_enabled = */
/*isAnyGestureActive();*/
/**
* uncomment if you want to disable
* automatically
* the gesture mode when a custom gesture is
* removed and no other gestures were enabled
*/
logError(1, "%s %s: Custom Gesture disabled!\n",
tag, __func__, res);
}
}
}
res |= fts_enableInterrupt();
custom_gesture_res = res;
return count;
}
#endif
/**
* cat gesture_coordinates to obtain the gesture coordinates
* the string returned in the shell follow this up as follow:
* AA = start byte
* X1X2X3X4 = 4 bytes in HEX format
* which represent an error code (00000000 no error)
*/
/**** if error code is all 0s ****/
/**
* CC = 1 byte in HEX format number of coords
* (pair of x,y) returned
*
* X1X2 Y1Y2 ... = X1X2 2 bytes in HEX format for
* x[i] and Y1Y2 2 bytes in HEX format for y[i] (MSB first)
*/
/********************************/
/* BB = end byte*/
static ssize_t fts_gesture_coordinates_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int size = 6 * 2;
//u8 coords_num;
u8 *all_strbuff = NULL;
int count = 0, res, i = 0;
logError(0, "%s %s: Getting gestures coordinates...\n", tag, __func__);
if (gesture_coords_reported < OK) {
logError(1, "%s %s:invalid coordinates! ERROR %08X\n",
tag, __func__, gesture_coords_reported);
res = gesture_coords_reported;
} else {
/*coords are pairs of x,y (*2) where each coord*/
/*is a short(2bytes=4char)(*4) + 1 byte(2char) num*/
/*of coords (+2)*/
size += gesture_coords_reported * 2 * 4 + 2;
/*coords_num = res;*/
res = OK;
/*set error code to OK*/
}
all_strbuff = kmalloc(size, GFP_KERNEL);
if (all_strbuff != NULL) {
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", res);
strlcat(all_strbuff, buff, size);
if (res >= OK) {
snprintf(buff, sizeof(buff), "%02X",
gesture_coords_reported);
strlcat(all_strbuff, buff, size);
for (i = 0; i < gesture_coords_reported; i++) {
snprintf(buff, sizeof(buff), "%04X",
gesture_coordinates_x[i]);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%04X",
gesture_coordinates_y[i]);
strlcat(all_strbuff, buff, size);
}
}
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
kfree(all_strbuff);
} else {
logError(1,
"%s %s:Unable to allocate all_strbuff! ERROR %08X\n",
tag, ERROR_ALLOC);
}
return count;
}
static ssize_t fts_gesture_coordinates_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
return 0;
}
#endif
/***************** PRODUCTION TEST ****************/
static ssize_t fts_stm_cmd_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
int n;
char *p = (char *) buf;
memset(typeOfComand, 0, CMD_STR_LEN * sizeof(u32));
logError(1, "%s\n", tag);
for (n = 0; n < (count + 1) / 3; n++) {
if (sscanf(p, "%02X ", &typeOfComand[n]) != 1)
return -EINVAL;
p += 3;
logError(1, "%s typeOfComand[%d] = %02X\n",
tag, n, typeOfComand[n]);
}
numberParameters = n;
logError(1, "%s Number of Parameters = %d\n", tag, numberParameters);
return count;
}
static ssize_t fts_stm_cmd_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
char buff[CMD_STR_LEN] = {0};
int res, j, doClean = 0, count;
int size = 6 * 2;
u8 *all_strbuff = NULL;
struct i2c_client *client = to_i2c_client(dev);
struct fts_ts_info *info = i2c_get_clientdata(client);
struct MutualSenseData compData = {0};
struct SelfSenseData comData = {0};
struct MutualSenseFrame frameMS = {0};
struct SelfSenseFrame frameSS = {0};
/**
* struct used for defining which test
* perform during the production test
*/
struct TestToDo todoDefault;
todoDefault.MutualRaw = 1;
todoDefault.MutualRawGap = 1;
todoDefault.MutualCx1 = 0;
todoDefault.MutualCx2 = 1;
todoDefault.MutualCx2Adj = 1;
todoDefault.MutualCxTotal = 0;
todoDefault.MutualCxTotalAdj = 0;
todoDefault.MutualKeyRaw = 0;
todoDefault.MutualKeyCx1 = 0;
todoDefault.MutualKeyCx2 = 0;
todoDefault.MutualKeyCxTotal = 0;
todoDefault.SelfForceRaw = 1;
todoDefault.SelfForceRawGap = 0;
todoDefault.SelfForceIx1 = 0;
todoDefault.SelfForceIx2 = 0;
todoDefault.SelfForceIx2Adj = 0;
todoDefault.SelfForceIxTotal = 1;
todoDefault.SelfForceIxTotalAdj = 0;
todoDefault.SelfForceCx1 = 0;
todoDefault.SelfForceCx2 = 0;
todoDefault.SelfForceCx2Adj = 0;
todoDefault.SelfForceCxTotal = 0;
todoDefault.SelfForceCxTotalAdj = 0;
todoDefault.SelfSenseRaw = 1;
todoDefault.SelfSenseRawGap = 0;
todoDefault.SelfSenseIx1 = 0;
todoDefault.SelfSenseIx2 = 0;
todoDefault.SelfSenseIx2Adj = 0;
todoDefault.SelfSenseIxTotal = 1;
todoDefault.SelfSenseIxTotalAdj = 0;
todoDefault.SelfSenseCx1 = 0;
todoDefault.SelfSenseCx2 = 0;
todoDefault.SelfSenseCx2Adj = 0;
todoDefault.SelfSenseCxTotal = 0;
todoDefault.SelfSenseCxTotalAdj = 0;
if (numberParameters >= 1) {
res = fts_disableInterrupt();
if (res < 0) {
logError(0, "%s fts_disableInterrupt: ERROR %08X\n",
tag, res);
res = (res | ERROR_DISABLE_INTER);
goto END;
}
#if defined(CONFIG_FB_MSM)
res = fb_unregister_client(&info->notifier);
#else
if (active_panel)
res = drm_panel_notifier_unregister(active_panel,
&info->notifier);
#endif
if (res < 0) {
logError(1, "%s ERROR: unregister notifier failed!\n",
tag);
goto END;
}
switch (typeOfComand[0]) {
/*ITO TEST*/
case 0x01:
res = production_test_ito();
break;
/*PRODUCTION TEST*/
case 0x00:
if (ftsInfo.u32_mpPassFlag != INIT_MP) {
logError(0, "%s MP Flag not set!\n", tag, res);
res = production_test_main(LIMITS_FILE, 1, 1,
&todoDefault, INIT_MP);
} else {
logError(0, "%s MP Flag set!\n", tag, res);
res = production_test_main(LIMITS_FILE, 1, 0,
&todoDefault, INIT_MP);
}
break;
/*read mutual raw*/
case 0x13:
logError(0, "%s Get 1 MS Frame\n", tag);
//res = getMSFrame(ADDR_RAW_TOUCH, &frame, 0);
res = getMSFrame2(MS_TOUCH_ACTIVE, &frameMS);
if (res < 0) {
logError(0,
"%s Error in taking MS frame.%02X\n",
tag, res);
} else {
logError(0, "%s The frame size is %d words\n",
tag, res);
size = (res * sizeof(short) + 8) * 2;
/* set res to OK because if getMSFrame is*/
/* successful res = number of words read*/
res = OK;
print_frame_short("MS frame =",
array1dTo2d_short(frameMS.node_data,
frameMS.node_data_size,
frameMS.header.sense_node),
frameMS.header.force_node,
frameMS.header.sense_node);
}
break;
/*read self raw*/
case 0x15:
logError(0, "%s Get 1 SS Frame\n", tag);
res = getSSFrame2(SS_TOUCH, &frameSS);
if (res < OK) {
logError(0,
"%s Error while taking the SS frame%02X\n",
tag, res);
} else {
logError(0, "%s The frame size is %d words\n",
tag, res);
size = (res * sizeof(short) + 8) * 2 + 1;
/**
* set res to OK because if getMSFrame is
* successful res = number of words read
*/
res = OK;
print_frame_short("SS force frame =",
array1dTo2d_short(frameSS.force_data,
frameSS.header.force_node, 1),
frameSS.header.force_node, 1);
print_frame_short("SS sense frame =",
array1dTo2d_short(frameSS.sense_data,
frameSS.header.sense_node,
frameSS.header.sense_node),
1,
frameSS.header.sense_node);
}
break;
/*read mutual comp data*/
case 0x14:
logError(0, "%s Get MS Compensation Data\n", tag);
res = readMutualSenseCompensationData(MS_TOUCH_ACTIVE,
&compData);
if (res < 0) {
logError(0,
"%s Error MS compensation data%02X\n",
tag, res);
} else {
logError(0,
"%s MS Data Reading Finished!\n",
tag);
size = ((compData.node_data_size + 9) *
sizeof(u8)) * 2;
print_frame_u8("MS Data (Cx2) =",
array1dTo2d_u8(compData.node_data,
compData.node_data_size,
compData.header.sense_node),
compData.header.force_node,
compData.header.sense_node);
}
break;
/*read self comp data*/
case 0x16:
logError(0, "%s Get SS Compensation Data...\n", tag);
res = readSelfSenseCompensationData(SS_TOUCH, &comData);
if (res < 0) {
logError(0, "%s Error reading SS data%02X\n",
tag, res);
} else {
logError(0, "%s SS Data Reading Finished!\n",
tag);
size = ((comData.header.force_node
+ comData.header.sense_node) * 2 + 12);
size *= sizeof(u8) * 2;
print_frame_u8("SS Data Ix2_fm = ",
array1dTo2d_u8(comData.ix2_fm,
comData.header.force_node, 1),
comData.header.force_node,
1);
print_frame_u8("SS Data Cx2_fm = ",
array1dTo2d_u8(comData.cx2_fm,
comData.header.force_node, 1),
comData.header.force_node,
1);
print_frame_u8("SS Data Ix2_sn = ",
array1dTo2d_u8(comData.ix2_sn,
comData.header.sense_node,
comData.header.sense_node),
1,
comData.header.sense_node);
print_frame_u8("SS Data Cx2_sn = ",
array1dTo2d_u8(comData.cx2_sn,
comData.header.sense_node,
comData.header.sense_node),
1,
comData.header.sense_node);
}
break;
/* MS Raw DATA TEST */
case 0x03:
res = fts_system_reset();
if (res >= OK)
res = production_test_ms_raw(LIMITS_FILE,
1, &todoDefault);
break;
/* MS CX DATA TEST */
case 0x04:
res = fts_system_reset();
if (res >= OK)
res = production_test_ms_cx(LIMITS_FILE,
1, &todoDefault);
break;
/* SS RAW DATA TEST */
case 0x05:
res = fts_system_reset();
if (res >= OK)
res = production_test_ss_raw(LIMITS_FILE,
1, &todoDefault);
break;
/* SS IX CX DATA TEST */
case 0x06:
res = fts_system_reset();
if (res >= OK)
res = production_test_ss_ix_cx(LIMITS_FILE,
1, &todoDefault);
break;
case 0xF0:
/* TOUCH ENABLE/DISABLE */
case 0xF1:
doClean = (int) (typeOfComand[0] & 0x01);
res = cleanUp(doClean);
break;
default:
logError(1,
"%s COMMAND NOT VALID!! Insert a proper value\n",
tag);
res = ERROR_OP_NOT_ALLOW;
break;
}
doClean = fts_enableInterrupt();
if (doClean < 0) {
logError(0, "%s fts_enableInterrupt: ERROR %08X\n",
tag, (doClean|ERROR_ENABLE_INTER));
}
} else {
logError(1, "%s NO COMMAND SPECIFIED!!!\n", tag);
res = ERROR_OP_NOT_ALLOW;
}
#if defined(CONFIG_FB_MSM)
if (fb_register_client(&info->notifier) < 0)
logError(1, "%s ERROR: register notifier failed!\n", tag);
#else
if (active_panel &&
drm_panel_notifier_register(active_panel, &info->notifier) < 0)
logError(1, "%s ERROR: register notifier failed!\n", tag);
#endif
END:
/*here start the reporting phase,*/
/* assembling the data to send in the file node */
all_strbuff = kmalloc(size, GFP_KERNEL);
if (!all_strbuff)
return 0;
memset(all_strbuff, 0, size);
snprintf(buff, sizeof(buff), "%02X", 0xAA);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%08X", res);
strlcat(all_strbuff, buff, size);
if (res >= OK) {
/*all the other cases are already fine printing only the res.*/
switch (typeOfComand[0]) {
case 0x13:
snprintf(buff, sizeof(buff), "%02X",
(u8) frameMS.header.force_node);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X",
(u8) frameMS.header.sense_node);
strlcat(all_strbuff, buff, size);
for (j = 0; j < frameMS.node_data_size; j++) {
snprintf(buff, sizeof(buff), "%04X",
frameMS.node_data[j]);
strlcat(all_strbuff, buff, size);
}
kfree(frameMS.node_data);
break;
case 0x15:
snprintf(buff, sizeof(buff), "%02X",
(u8) frameSS.header.force_node);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X",
(u8) frameSS.header.sense_node);
strlcat(all_strbuff, buff, size);
/* Copying self raw data Force */
for (j = 0; j < frameSS.header.force_node; j++) {
snprintf(buff, sizeof(buff), "%04X",
frameSS.force_data[j]);
strlcat(all_strbuff, buff, size);
}
/* Copying self raw data Sense */
for (j = 0; j < frameSS.header.sense_node; j++) {
snprintf(buff, sizeof(buff), "%04X",
frameSS.sense_data[j]);
strlcat(all_strbuff, buff, size);
}
kfree(frameSS.force_data);
kfree(frameSS.sense_data);
break;
case 0x14:
snprintf(buff, sizeof(buff), "%02X",
(u8) compData.header.force_node);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X",
(u8) compData.header.sense_node);
strlcat(all_strbuff, buff, size);
/* Cpying CX1 value */
snprintf(buff, sizeof(buff), "%02X", compData.cx1);
strlcat(all_strbuff, buff, size);
/* Copying CX2 values */
for (j = 0; j < compData.node_data_size; j++) {
snprintf(buff, sizeof(buff), "%02X",
*(compData.node_data + j));
strlcat(all_strbuff, buff, size);
}
kfree(compData.node_data);
break;
case 0x16:
snprintf(buff, sizeof(buff), "%02X",
comData.header.force_node);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X",
comData.header.sense_node);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", comData.f_ix1);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", comData.s_ix1);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", comData.f_cx1);
strlcat(all_strbuff, buff, size);
snprintf(buff, sizeof(buff), "%02X", comData.s_cx1);
strlcat(all_strbuff, buff, size);
/* Copying IX2 Force */
for (j = 0; j < comData.header.force_node; j++) {
snprintf(buff, sizeof(buff), "%02X",
comData.ix2_fm[j]);
strlcat(all_strbuff, buff, size);
}
/* Copying IX2 Sense */
for (j = 0; j < comData.header.sense_node; j++) {
snprintf(buff, sizeof(buff), "%02X",
comData.ix2_sn[j]);
strlcat(all_strbuff, buff, size);
}
/* Copying CX2 Force */
for (j = 0; j < comData.header.force_node; j++) {
snprintf(buff, sizeof(buff), "%02X",
comData.cx2_fm[j]);
strlcat(all_strbuff, buff, size);
}
/* Copying CX2 Sense */
for (j = 0; j < comData.header.sense_node; j++) {
snprintf(buff, sizeof(buff), "%02X",
comData.cx2_sn[j]);
strlcat(all_strbuff, buff, size);
}
kfree(comData.ix2_fm);
kfree(comData.ix2_sn);
kfree(comData.cx2_fm);
kfree(comData.cx2_sn);
break;
default:
break;
}
}
snprintf(buff, sizeof(buff), "%02X", 0xBB);
strlcat(all_strbuff, buff, size);
count = snprintf(buf, TSP_BUF_SIZE, "%s\n", all_strbuff);
/**
* need to reset the number of parameters
* in order to wait the next command,
* comment if you want to repeat
* the last command sent just doing a cat
*/
numberParameters = 0;
/* logError(0,"%s numberParameters = %d\n",tag, numberParameters);*/
kfree(all_strbuff);
return count;
}
static DEVICE_ATTR_RW(fts_fwupdate);
static DEVICE_ATTR_RO(fts_appid);
static DEVICE_ATTR_RO(fts_mode_active);
static DEVICE_ATTR_RO(fts_lockdown_info);
static DEVICE_ATTR_RW(fts_strength_frame);
static DEVICE_ATTR_RO(fts_fw_test);
static DEVICE_ATTR_RW(fts_stm_cmd);
#ifdef USE_ONE_FILE_NODE
static DEVICE_ATTR_RW(fts_feature_enable);
#else
#ifdef EDGE_REJ
static DEVICE_ATTR_RW(fts_edge_rej);
#endif
#ifdef CORNER_REJ
static DEVICE_ATTR_RW(fts_corner_rej);
#endif
#ifdef EDGE_PALM_REJ
static DEVICE_ATTR_RW(fts_edge_palm_rej);
#endif
#ifdef CHARGER_MODE
static DEVICE_ATTR_RW(fts_charger_mode);
#endif
#ifdef GLOVE_MODE
static DEVICE_ATTR_RW(fts_glove_mode);
#endif
#ifdef VR_MODE
static DEVICE_ATTR_RW(fts_vr_mode);
#endif
#ifdef COVER_MODE
static DEVICE_ATTR_RW(fts_cover_mode);
#endif
#ifdef STYLUS_MODE
static DEVICE_ATTR_RW(fts_stylus_mode);
#endif
#endif
#ifdef PHONE_GESTURE
static DEVICE_ATTR_RW(fts_gesture_mask);
static DEVICE_ATTR_RW(fts_gesture_coordinates);
#ifdef USE_CUSTOM_GESTURES
static DEVICE_ATTR_RW(fts_add_custom_gesture);
static DEVICE_ATTR_RW(fts_remove_custom_gesture);
#endif
#endif
#ifdef CONFIG_ST_TRUSTED_TOUCH
static DEVICE_ATTR(trusted_touch_enable,
0664,
fts_trusted_touch_enable_show,
fts_trusted_touch_enable_store);
#endif
/* /sys/devices/soc.0/f9928000.i2c/i2c-6/6-0049 */
static struct attribute *fts_attr_group[] = {
&dev_attr_fts_fwupdate.attr,
&dev_attr_fts_appid.attr,
&dev_attr_fts_mode_active.attr,
&dev_attr_fts_lockdown_info.attr,
&dev_attr_fts_strength_frame.attr,
&dev_attr_fts_fw_test.attr,
&dev_attr_fts_stm_cmd.attr,
#ifdef USE_ONE_FILE_NODE
&dev_attr_fts_feature_enable.attr,
#else
#ifdef EDGE_REJ
&dev_attr_fts_edge_rej.attr,
#endif
#ifdef CORNER_REJ
&dev_attr_fts_corner_rej.attr,
#endif
#ifdef EDGE_PALM_REJ
&dev_attr_fts_edge_palm_rej.attr,
#endif
#ifdef CHARGER_MODE
&dev_attr_fts_charger_mode.attr,
#endif
#ifdef GLOVE_MODE
&dev_attr_fts_glove_mode.attr,
#endif
#ifdef VR_MODE
&dev_attr_fts_vr_mode.attr,
#endif
#ifdef COVER_MODE
&dev_attr_fts_cover_mode.attr,
#endif
#ifdef STYLUS_MODE
&dev_attr_fts_stylus_mode.attr,
#endif
#endif
#ifdef PHONE_GESTURE
&dev_attr_fts_gesture_mask.attr,
&dev_attr_fts_gesture_coordinates.attr,
#ifdef USE_CUSTOM_GESTURES
&dev_attr_fts_add_custom_gesture.attr,
&dev_attr_fts_remove_custom_gesture.attr,
#endif
#endif
#ifdef CONFIG_ST_TRUSTED_TOUCH
&dev_attr_trusted_touch_enable.attr,
#endif
NULL,
};
static int fts_command(struct fts_ts_info *info, unsigned char cmd)
{
unsigned char regAdd;
int ret;
regAdd = cmd;
ret = fts_writeCmd(®Add, sizeof(regAdd)); /* 0 = ok */
logError(0, "%s Issued command 0x%02x, return value %08X\n", cmd, ret);
return ret;
}
void fts_input_report_key(struct fts_ts_info *info, int key_code)
{
mutex_lock(&info->input_report_mutex);
input_report_key(info->input_dev, key_code, 1);
input_sync(info->input_dev);
input_report_key(info->input_dev, key_code, 0);
input_sync(info->input_dev);
mutex_unlock(&info->input_report_mutex);
}
/*
* New Interrupt handle implementation
*/
static inline unsigned char *fts_next_event(unsigned char *evt)
{
/* Nothing to do with this event, moving to the next one */
evt += FIFO_EVENT_SIZE;
/* the previous one was the last event ? */
return (evt[-1] & 0x1F) ? evt : NULL;
}
/* EventId : 0x00 */
static void fts_nop_event_handler(struct fts_ts_info *info,
unsigned char *event)
{
/**
* logError(1,
* "%s %s Doing nothing for event =
* %02X %02X %02X %02X %02X %02X %02X %02X\n",
* tag, __func__, event[0], event[1], event[2],
* event[3], event[4], event[5], event[6], event[7]);
*/
/* return fts_next_event(event); */
}
/* EventId : 0x03 */
static void fts_enter_pointer_event_handler(struct fts_ts_info *info,
unsigned char *event)
{
unsigned char touchId, touchcount;
int x, y;
int minor;
int major, distance = 0;
u8 touchsize;
if (!info->resume_bit && !info->aoi_notify_enabled)
return;
touchId = event[1] & 0x0F;
touchcount = (event[1] & 0xF0) >> 4;
touchsize = (event[5] & 0xC0) >> 6;
major = (event[5] & 0x1F); // bit0-bit4: major
minor = event[6]; // event6:minor
__set_bit(touchId, &info->touch_id);
x = (event[2] << 4) | (event[4] & 0xF0) >> 4;
y = (event[3] << 4) | (event[4] & 0x0F);
if (info->bdata->x_flip)
x = X_AXIS_MAX - x;
if (info->bdata->y_flip)
y = Y_AXIS_MAX - y;
if (x == X_AXIS_MAX)
x--;
if (y == Y_AXIS_MAX)
y--;
if (info->sensor_sleep && info->aoi_notify_enabled)
if ((x < info->aoi_left || x > info->aoi_right)
|| (y < info->aoi_top || y > info->aoi_bottom)) {
x = -x;
y = -y;
}
input_mt_slot(info->input_dev, touchId);
input_mt_report_slot_state(info->input_dev, MT_TOOL_FINGER, 1);
if (touchcount == 1) {
input_report_key(info->input_dev, BTN_TOUCH, 1);
input_report_key(info->input_dev, BTN_TOOL_FINGER, 1);
}
input_report_abs(info->input_dev, ABS_MT_POSITION_X, x);
input_report_abs(info->input_dev, ABS_MT_POSITION_Y, y);
input_report_abs(info->input_dev, ABS_MT_TOUCH_MAJOR, major);
input_report_abs(info->input_dev, ABS_MT_TOUCH_MINOR, minor);
input_report_abs(info->input_dev, ABS_MT_DISTANCE, distance);
return;
}
/* EventId : 0x04 */
static void fts_leave_pointer_event_handler(struct fts_ts_info *info,
unsigned char *event)
{
unsigned char touchId, touchcount;
u8 touchsize;
touchId = event[1] & 0x0F;
touchcount = (event[1] & 0xF0) >> 4;
touchsize = (event[5] & 0xC0) >> 6;
input_mt_slot(info->input_dev, touchId);
__clear_bit(touchId, &info->touch_id);
input_mt_report_slot_state(info->input_dev, MT_TOOL_FINGER, 0);
if (touchcount == 0) {
input_report_key(info->input_dev, BTN_TOUCH, 0);
input_report_key(info->input_dev, BTN_TOOL_FINGER, 0);
}
input_report_abs(info->input_dev, ABS_MT_TRACKING_ID, -1);
}
/* EventId : 0x05 */
#define fts_motion_pointer_event_handler fts_enter_pointer_event_handler
#ifdef PHONE_KEY
/* EventId : 0x0E */
static void fts_key_status_event_handler(struct fts_ts_info *info,
unsigned char *event)
{
int value;
logError(0,
"%s %sReceived event %02X %02X %02X %02X %02X %02X %02X %02X\n",
tag, __func__, event[0], event[1], event[2], event[3],
event[4], event[5], event[6], event[7]);
/*
* TODO: the customer should handle the events coming
* from the keys according his needs (this is an example
* that report only the single pressure of one key at time)
*/
/* event[2] contain the bitmask of the keys that are actually pressed */
if (event[2] != 0) {
switch (event[2]) {
case KEY1:
value = KEY_HOMEPAGE;
logError(0, "%s %s: Button HOME!\n", tag, __func__);
break;
case KEY2:
value = KEY_BACK;
logError(0, "%s %s: Button Back !\n", tag, __func__);
break;
case KEY3:
value = KEY_MENU;
logError(0, "%s %s: Button Menu !\n", tag, __func__);
break;
default:
logError(0,
"%s %s:No valid Button ID or more than one key pressed!\n",
tag, __func__);
return;
}
fts_input_report_key(info, value);
} else {
logError(0, "%s %s: All buttons released!\n", tag, __func__);
}
}
#endif
/* EventId : 0x0F */
static void fts_error_event_handler(struct fts_ts_info *info,
unsigned char *event)
{
int error = 0;
logError(0,
"%s %sReceived event:%02X %02X %02X %02X %02X %02X %02X %02X\n",
tag, __func__, event[0], event[1], event[2], event[3],
event[4], event[5], event[6], event[7]);
switch (event[1]) {
case EVENT_TYPE_ESD_ERROR: /* esd */
/* before reset clear all slot */
release_all_touches(info);
fts_chip_powercycle(info);
error = fts_system_reset();
error |= fts_mode_handler(info, 0);
error |= fts_enableInterrupt();
if (error < OK) {
logError(1,
"%s %s Cannot restore the device ERROR %08X\n",
tag, __func__, error);
}
break;
case EVENT_TYPE_WATCHDOG_ERROR: /* watch dog timer */
/* if (event[2] == 0) { */
dumpErrorInfo();
/* before reset clear all slot */
release_all_touches(info);
error = fts_system_reset();
error |= fts_mode_handler(info, 0);
error |= fts_enableInterrupt();
if (error < OK) {
logError(1,
"%s %s Cannot reset the device ERROR %08X\n",
tag, __func__, error);
}
/* } */
break;
}
/* return fts_next_event(event); */
}
/* EventId : 0x10 */
static void fts_controller_ready_event_handler(struct fts_ts_info *info,
unsigned char *event)
{
int error;
logError(0, "%s %s Received event 0x%02x\n", tag, __func__, event[0]);
release_all_touches(info);
setSystemResettedUp(1);
setSystemResettedDown(1);
error = fts_mode_handler(info, 0);
if (error < OK) {
logError(1,
"%s %s Cannot restore the device status ERROR %08X\n",
tag, __func__, error);
}
/* return fts_next_event(event); */
}
/* EventId : 0x16 */
static void fts_status_event_handler(struct fts_ts_info *info,
unsigned char *event)
{
/* logError(1, "%s Received event 0x%02x\n", tag, event[0]); */
switch (event[1]) {
case EVENT_TYPE_MS_TUNING_CMPL:
case EVENT_TYPE_SS_TUNING_CMPL:
case FTS_FORCE_CAL_SELF_MUTUAL:
case FTS_FLASH_WRITE_CONFIG:
case FTS_FLASH_WRITE_COMP_MEMORY:
case FTS_FORCE_CAL_SELF:
case FTS_WATER_MODE_ON:
case FTS_WATER_MODE_OFF:
default:
logError(0, "%s %s Received unhandled status event = ",
tag, __func__);
logError(0, "%02X %02X %02X %02X %02X %02X %02X %02X\n",
event[0], event[1], event[2], event[3], event[4],
event[5], event[6], event[7]);
break;
}
/* return fts_next_event(event); */
}
#ifdef PHONE_GESTURE
/**
* TODO: Customer should implement their own action
* in respons of a gesture event.
* This is an example that simply print the gesture received
*/
static void fts_gesture_event_handler(struct fts_ts_info *info,
unsigned char *event)
{
unsigned char touchId;
int value;
int needCoords = 0;
logError(0,
"%s gesture event: %02X %02X %02X %02X %02X %02X %02X %02X\n",
tag, event[0], event[1], event[2], event[3],
event[4], event[5], event[6], event[7]);
if (event[1] == 0x03) {
logError(1, "%s %s: Gesture ID %02X enable_status = %02X\n",
tag, __func__, event[2], event[3]);
}
if (event[1] == EVENT_TYPE_ENB && event[2] == 0x00) {
switch (event[3]) {
case GESTURE_ENABLE:
logError(1, "%s %s: Gesture Enabled! res = %02X\n",
tag, __func__, event[4]);
break;
case GESTURE_DISABLE:
logError(1, "%s %s: Gesture Disabled! res = %02X\n",
tag, __func__, event[4]);
break;
default:
logError(1, "%s %s: Event not Valid!\n", tag, __func__);
}
}
if (event[0] == EVENTID_GESTURE && (event[1] == EVENT_TYPE_GESTURE_DTC1
|| event[1] == EVENT_TYPE_GESTURE_DTC2)) {
/* always use touchId zero */
touchId = 0;
__set_bit(touchId, &info->touch_id);
/* by default read the coordinates*/
/* for all gestures excluding double tap */
needCoords = 1;
switch (event[2]) {
case GES_ID_DBLTAP:
value = KEY_WAKEUP;
logError(0, "%s %s: double tap!\n", tag, __func__);
needCoords = 0;
break;
case GES_ID_AT:
value = KEY_WWW;
logError(0, "%s %s: @!\n", tag, __func__);
break;
case GES_ID_C:
value = KEY_C;
logError(0, "%s %s: C !\n", tag, __func__);
break;
case GES_ID_E:
value = KEY_E;
logError(0, "%s %s: e !\n", tag, __func__);
break;
case GES_ID_F:
value = KEY_F;
logError(0, "%s %s: F !\n", tag, __func__);
break;
case GES_ID_L:
value = KEY_L;
logError(0, "%s %s: L !\n", tag, __func__);
break;
case GES_ID_M:
value = KEY_M;
logError(0, "%s %s: M !\n", tag, __func__);
break;
case GES_ID_O:
value = KEY_O;
logError(0, "%s %s: O !\n", tag, __func__);
break;
case GES_ID_S:
value = KEY_S;
logError(0, "%s %s: S !\n", tag, __func__);
break;
case GES_ID_V:
value = KEY_V;
logError(0, "%s %s: V !\n", tag, __func__);
break;
case GES_ID_W:
value = KEY_W;
logError(0, "%s %s: W !\n", tag, __func__);
break;
case GES_ID_Z:
value = KEY_Z;
logError(0, "%s %s: Z !\n", tag, __func__);
break;
case GES_ID_HFLIP_L2R:
value = KEY_RIGHT;
logError(0, "%s %s: -> !\n", tag, __func__);
break;
case GES_ID_HFLIP_R2L:
value = KEY_LEFT;
logError(0, "%s %s: <- !\n", tag, __func__);
break;
case GES_ID_VFLIP_D2T:
value = KEY_UP;
logError(0, "%s %s: UP !\n", tag, __func__);
break;
case GES_ID_VFLIP_T2D:
value = KEY_DOWN;
logError(0, "%s %s: DOWN !\n", tag, __func__);
break;
case GES_ID_CUST1:
value = KEY_F1;
logError(0, "%s %s: F1 !\n", tag, __func__);
break;
case GES_ID_CUST2:
value = KEY_F1;
logError(0, "%s %s: F2 !\n", tag, __func__);
break;
case GES_ID_CUST3:
value = KEY_F3;
logError(0, "%s %s: F3 !\n", tag, __func__);
break;
case GES_ID_CUST4:
value = KEY_F1;
logError(0, "%s %s: F4 !\n", tag, __func__);
break;
case GES_ID_CUST5:
value = KEY_F1;
logError(0, "%s %s: F5 !\n", tag, __func__);
break;
case GES_ID_LEFTBRACE:
value = KEY_LEFTBRACE;
logError(0, "%s %s: < !\n", tag, __func__);
break;
case GES_ID_RIGHTBRACE:
value = KEY_RIGHTBRACE;
logError(0, "%s %s: > !\n", tag, __func__);
break;
default:
logError(0, "%s %s: No valid GestureID!\n",
tag, __func__);
goto gesture_done;
}
/* no coordinates for gestures reported by FW */
if (event[1] == EVENT_TYPE_GESTURE_DTC1)
needCoords = 0;
if (needCoords == 1)
readGestureCoords(event);
fts_input_report_key(info, value);
gesture_done:
/* Done with gesture event, clear bit. */
__clear_bit(touchId, &info->touch_id);
}
/* return fts_next_event(event); */
}
#endif
/* EventId : 0x05 */
#define fts_motion_pointer_event_handler fts_enter_pointer_event_handler
/*
* This handler is called each time there is at least
* one new event in the FIFO
*/
static void fts_event_handler(struct work_struct *work)
{
struct fts_ts_info *info;
int error = 0, count = 0;
unsigned char regAdd;
unsigned char data[FIFO_EVENT_SIZE] = {0};
unsigned char eventId;
struct event_dispatch_handler_t event_handler;
info = container_of(work, struct fts_ts_info, work);
/*
* read all the FIFO and parsing events
*/
__pm_wakeup_event(info->wakeup_source, HZ);
regAdd = FIFO_CMD_READONE;
for (count = 0; count < FIFO_DEPTH; count++) {
error = fts_readCmd(®Add, sizeof(regAdd), data,
FIFO_EVENT_SIZE);
if (error == OK && data[0] != EVENTID_NO_EVENT)
eventId = data[0];
else
break;
if (eventId < EVENTID_LAST) {
event_handler = info->event_dispatch_table[eventId];
event_handler.handler(info, (data));
}
}
input_sync(info->input_dev);
fts_interrupt_enable(info);
}
static void fts_fw_update_auto(struct work_struct *work)
{
u8 cmd[4] = { FTS_CMD_HW_REG_W, 0x00, 0x00, SYSTEM_RESET_VALUE };
int event_to_search[2] = {(int)EVENTID_ERROR_EVENT,
(int)EVENT_TYPE_CHECKSUM_ERROR};
u8 readData[FIFO_EVENT_SIZE] = {0};
int flag_init = 0;
int retval = 0;
int retval1 = 0;
int ret;
struct fts_ts_info *info;
struct delayed_work *fwu_work = container_of(work,
struct delayed_work, work);
int crc_status = 0;
int error = 0;
struct Firmware fwD;
int orig_size;
u8 *orig_data;
info = container_of(fwu_work, struct fts_ts_info, fwu_work);
logError(0, "%s Fw Auto Update is starting...\n", tag);
ret = getFWdata(PATH_FILE_FW, &orig_data, &orig_size, 0);
if (ret < OK) {
logError(0, "%s %s: impossible retrieve FW... ERROR %08X\n",
tag, __func__, ERROR_MEMH_READ);
ret = (ret | ERROR_MEMH_READ);
goto NO_FIRMWARE_UPDATE;
}
ret = parseBinFile(orig_data, orig_size, &fwD, 1);
if (ret < OK) {
logError(1, "%s %s: impossible parse ERROR %08X\n",
tag, __func__, ERROR_MEMH_READ);
ret = (ret | ERROR_MEMH_READ);
kfree(fwD.data);
goto NO_FIRMWARE_UPDATE;
}
fts_chip_powercycle(info);
retval = flash_burn(&fwD, crc_status, 1);
if ((retval & 0xFF000000) == ERROR_FLASH_PROCEDURE) {
logError(1, "%s %s:firmware update retry! ERROR %08X\n",
tag, __func__, retval);
fts_chip_powercycle(info);
retval1 = flash_burn(&fwD, crc_status, 1);
if ((retval1 & 0xFF000000) == ERROR_FLASH_PROCEDURE) {
logError(1, "%s %s: update failed again! ERROR %08X\n",
tag, __func__, retval1);
logError(1, "%s Fw Auto Update Failed!\n", tag);
}
}
kfree(fwD.data);
u16ToU8_be(SYSTEM_RESET_ADDRESS, &cmd[1]);
ret = fts_writeCmd(cmd, 4);
if (ret < OK) {
logError(1, "%s %s Can't send reset command! ERROR %08X\n",
tag, __func__, ret);
} else {
setSystemResettedDown(1);
setSystemResettedUp(1);
ret = pollForEvent(event_to_search, 2, readData,
GENERAL_TIMEOUT);
if (ret < OK) {
logError(0, "%s %s: No CX CRC Found!\n", tag, __func__);
} else {
if (readData[2] == CRC_CX_MEMORY) {
logError(1, "%s %s: CRC Error! ERROR:%02X\n\n",
tag, __func__, readData[2]);
flag_init = 1;
}
}
}
if (ftsInfo.u8_msScrConfigTuneVer != ftsInfo.u8_msScrCxmemTuneVer ||
ftsInfo.u8_ssTchConfigTuneVer != ftsInfo.u8_ssTchCxmemTuneVer)
ret = ERROR_GET_INIT_STATUS;
else if (((ftsInfo.u32_mpPassFlag != INIT_MP)
&& (ftsInfo.u32_mpPassFlag != INIT_FIELD)) || flag_init == 1)
ret = ERROR_GET_INIT_STATUS;
else
ret = OK;
if (ret == ERROR_GET_INIT_STATUS) {
error = fts_chip_initialization(info);
if (error < OK)
logError(1, "%s %s Can't initialize chip! ERROR %08X",
tag, __func__, error);
}
NO_FIRMWARE_UPDATE:
error = fts_init_afterProbe(info);
if (error < OK)
logError(1, "%s Can't initialize hardware device ERROR %08X\n",
tag, error);
logError(0, "%s Fw Auto Update Finished!\n", tag);
}
static int fts_chip_initialization(struct fts_ts_info *info)
{
int ret2 = 0;
int retry;
int initretrycnt = 0;
struct TestToDo todoDefault;
todoDefault.MutualRaw = 1;
todoDefault.MutualRawGap = 1;
todoDefault.MutualCx1 = 0;
todoDefault.MutualCx2 = 0;
todoDefault.MutualCx2Adj = 0;
todoDefault.MutualCxTotal = 0;
todoDefault.MutualCxTotalAdj = 0;
todoDefault.MutualKeyRaw = 0;
todoDefault.MutualKeyCx1 = 0;
todoDefault.MutualKeyCx2 = 0;
todoDefault.MutualKeyCxTotal = 0;
todoDefault.SelfForceRaw = 0;
todoDefault.SelfForceRawGap = 0;
todoDefault.SelfForceIx1 = 0;
todoDefault.SelfForceIx2 = 0;
todoDefault.SelfForceIx2Adj = 0;
todoDefault.SelfForceIxTotal = 0;
todoDefault.SelfForceIxTotalAdj = 0;
todoDefault.SelfForceCx1 = 0;
todoDefault.SelfForceCx2 = 0;
todoDefault.SelfForceCx2Adj = 0;
todoDefault.SelfForceCxTotal = 0;
todoDefault.SelfForceCxTotalAdj = 0;
todoDefault.SelfSenseRaw = 1;
todoDefault.SelfSenseRawGap = 0;
todoDefault.SelfSenseIx1 = 0;
todoDefault.SelfSenseIx2 = 0;
todoDefault.SelfSenseIx2Adj = 0;
todoDefault.SelfSenseIxTotal = 0;
todoDefault.SelfSenseIxTotalAdj = 0;
todoDefault.SelfSenseCx1 = 0;
todoDefault.SelfSenseCx2 = 0;
todoDefault.SelfSenseCx2Adj = 0;
todoDefault.SelfSenseCxTotal = 0;
todoDefault.SelfSenseCxTotalAdj = 0;
for (retry = 0; retry <= INIT_FLAG_CNT; retry++) {
ret2 = production_test_main(LIMITS_FILE, 1, 1, &todoDefault,
INIT_FIELD);
if (ret2 == OK)
break;
initretrycnt++;
logError(1, "%s %s: cycle count = %04d - ERROR %08X\n",
tag, __func__, initretrycnt, ret2);
fts_chip_powercycle(info);
}
if (ret2 < OK)
logError(1, "%s failed to initializate 3 times\n", tag);
return ret2;
}
#ifdef FTS_USE_POLLING_MODE
static enum hrtimer_restart fts_timer_func(struct hrtimer *timer)
{
struct fts_ts_info *info =
container_of(timer, struct fts_ts_info, timer);
queue_work(info->event_wq, &info->work);
return HRTIMER_NORESTART;
}
#else
static irqreturn_t fts_interrupt_handler(int irq, void *handle)
{
struct fts_ts_info *info = handle;
if (!info) {
pr_err("%s: Invalid info\n", __func__);
return IRQ_HANDLED;
}
#ifdef CONFIG_ST_TRUSTED_TOUCH
#ifndef CONFIG_ARCH_QTI_VM
if (atomic_read(&info->vm_info->pvm_owns_iomem) &&
atomic_read(&info->vm_info->pvm_owns_irq) &&
atomic_read(&info->trusted_touch_enabled)) {
pr_err("%s: Cannot service interrupts in PVM while trusted touch is enabled\n",
__func__);
return IRQ_HANDLED;
}
#endif
#endif
disable_irq_nosync(info->client->irq);
queue_work(info->event_wq, &info->work);
return IRQ_HANDLED;
}
#endif
static int fts_interrupt_install(struct fts_ts_info *info)
{
int i, error = 0;
size_t len;
len = sizeof(struct event_dispatch_handler_t) * EVENTID_LAST;
info->event_dispatch_table = kzalloc(len, GFP_KERNEL);
if (!info->event_dispatch_table) {
logError(1, "%s OOM allocating event dispatch table\n", tag);
return -ENOMEM;
}
for (i = 0; i < EVENTID_LAST; i++)
info->event_dispatch_table[i].handler = fts_nop_event_handler;
install_handler(info, ENTER_POINTER, enter_pointer);
install_handler(info, LEAVE_POINTER, leave_pointer);
install_handler(info, MOTION_POINTER, motion_pointer);
install_handler(info, ERROR_EVENT, error);
install_handler(info, CONTROL_READY, controller_ready);
install_handler(info, STATUS_UPDATE, status);
#ifdef PHONE_GESTURE
install_handler(info, GESTURE, gesture);
#endif
#ifdef PHONE_KEY
install_handler(info, KEY_STATUS, key_status);
#endif
/* disable interrupts in any case */
error = fts_disableInterrupt();
#ifdef FTS_USE_POLLING_MODE
logError(0, "%s Polling Mode\n");
hrtimer_init(&info->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
info->timer.function = fts_timer_func;
hrtimer_start(&info->timer, ktime_set(1, 0), HRTIMER_MODE_REL);
#else
#ifdef CONFIG_ARCH_QTI_VM
logError(0, "%s Interrupt Mode\n", tag);
if (request_threaded_irq(info->client->irq, NULL, fts_interrupt_handler,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT, info->client->name, info)) {
logError(1, "%s Request irq failed\n", tag);
kfree(info->event_dispatch_table);
error = -EBUSY;
}
#else
logError(0, "%s Interrupt Mode\n", tag);
if (request_threaded_irq(info->client->irq, NULL, fts_interrupt_handler,
IRQF_TRIGGER_LOW | IRQF_ONESHOT, info->client->name, info)) {
logError(1, "%s Request irq failed\n", tag);
kfree(info->event_dispatch_table);
error = -EBUSY;
}
#endif
#endif
return error;
}
static void fts_interrupt_uninstall(struct fts_ts_info *info)
{
fts_disableInterrupt();
kfree(info->event_dispatch_table);
#ifdef FTS_USE_POLLING_MODE
hrtimer_cancel(&info->timer);
#else
free_irq(info->client->irq, info);
#endif
}
static void fts_interrupt_enable(struct fts_ts_info *info)
{
#ifdef FTS_USE_POLLING_MODE
hrtimer_start(&info->timer, ktime_set(0, 10000000), HRTIMER_MODE_REL);
#else
enable_irq(info->client->irq);
#endif
/* enable the touch IC irq */
fts_enableInterrupt();
}
static void fts_interrupt_disable(struct fts_ts_info *info)
{
/* disable the touch IC irq */
fts_disableInterrupt();
#ifdef FTS_USE_POLLING_MODE
hrtimer_cancel(&info->timer);
#else
disable_irq(info->client->irq);
#endif
}
static int fts_init(struct fts_ts_info *info)
{
int error;
error = fts_system_reset();
if (error < OK && error != (ERROR_TIMEOUT | ERROR_SYSTEM_RESET_FAIL)) {
logError(1, "%s Cannot reset the device! ERROR %08X\n",
tag, error);
return error;
}
if (error == (ERROR_TIMEOUT | ERROR_SYSTEM_RESET_FAIL)) {
logError(1, "%s Setting default Chip INFO!\n", tag);
defaultChipInfo(0);
} else {
error = readChipInfo(0);
if (error < OK) {
logError(1, "%s Cannot read Chip Info!ERROR:%08X\n",
tag, error);
}
}
error = fts_interrupt_install(info);
if (error != OK)
logError(1, "%s Init (1) error (ERROR = %08X)\n", tag, error);
return error;
}
int fts_chip_powercycle(struct fts_ts_info *info)
{
int error = 0;
logError(0, "%s %s: Power Cycle Starting...\n", tag, __func__);
/*
* if IRQ pin is short with DVDD a call to
* the ISR will triggered when the regulator is turned off
*/
logError(0, "%s %s: Disabling IRQ...\n", tag, __func__);
disable_irq_nosync(info->client->irq);
if (info->pwr_reg) {
error = regulator_disable(info->pwr_reg);
if (error < 0) {
logError(1, "%s %s: Failed to disable DVDD regulator\n",
tag, __func__);
}
}
if (info->bus_reg) {
error = regulator_disable(info->bus_reg);
if (error < 0) {
logError(1, "%s %s: Failed to disable AVDD regulator\n",
tag, __func__);
}
}
if (info->bdata->reset_gpio != GPIO_NOT_DEFINED)
gpio_set_value(info->bdata->reset_gpio, 0);
else
msleep(300);
if (info->pwr_reg) {
error = regulator_enable(info->bus_reg);
if (error < 0) {
logError(1, "%s %s: Failed to enable AVDD regulator\n",
tag, __func__);
}
}
if (info->bus_reg) {
error = regulator_enable(info->pwr_reg);
if (error < 0) {
logError(1, "%s %s: Failed to enable DVDD regulator\n",
tag, __func__);
}
}
/* time needed by the regulators for reaching the regime values */
msleep(20);
if (info->bdata->reset_gpio != GPIO_NOT_DEFINED) {
/* time to wait before bring up the reset */
/* gpio after the power up of the regulators */
msleep(20);
gpio_set_value(info->bdata->reset_gpio, 1);
/* mdelay(300); */
}
release_all_touches(info);
logError(0, "%s %s: Enabling IRQ...\n", tag, __func__);
enable_irq(info->client->irq);
logError(0, "%s %s: Power Cycle Finished! ERROR CODE = %08x\n",
tag, __func__, error);
setSystemResettedUp(1);
setSystemResettedDown(1);
return error;
}
int fts_chip_powercycle2(struct fts_ts_info *info, unsigned long sleep)
{
int error = 0;
logError(0, "%s %s: Power Cycle Starting...\n", tag, __func__);
if (info->pwr_reg) {
error = regulator_disable(info->pwr_reg);
if (error < 0) {
logError(1, "%s %s: Failed to disable DVDD regulator\n",
tag, __func__);
}
}
if (info->bus_reg) {
error = regulator_disable(info->bus_reg);
if (error < 0) {
logError(1, "%s %s: Failed to disable AVDD regulator\n",
tag, __func__);
}
}
if (info->bdata->reset_gpio != GPIO_NOT_DEFINED)
gpio_set_value(info->bdata->reset_gpio, 0);
msleep(sleep);
if (info->pwr_reg) {
error = regulator_enable(info->bus_reg);
if (error < 0) {
logError(1, "%s %s: Failed to enable AVDD regulator\n",
tag, __func__);
}
}
if (info->bus_reg) {
error = regulator_enable(info->pwr_reg);
if (error < 0) {
logError(1, "%s %s: Failed to enable DVDD regulator\n",
tag, __func__);
}
}
/* time needed by the regulators for reaching the regime values */
msleep(500);
if (info->bdata->reset_gpio != GPIO_NOT_DEFINED) {
/*
* time to wait before bring up the reset
* gpio after the power up of the regulators
*/
msleep(20);
gpio_set_value(info->bdata->reset_gpio, 1);
/* msleep(300); */
}
/* before reset clear all slot */
release_all_touches(info);
logError(0, "%s %s: Power Cycle Finished! ERROR CODE = %08x\n",
tag, __func__, error);
setSystemResettedUp(1);
setSystemResettedDown(1);
return error;
}
static int fts_init_afterProbe(struct fts_ts_info *info)
{
int error = 0;
/* system reset */
error = cleanUp(0);
/* enable the features and the sensing */
error |= fts_mode_handler(info, 0);
/* enable the interrupt */
error |= fts_enableInterrupt();
#if defined(CONFIG_FB_MSM)
error |= fb_register_client(&info->notifier);
#else
if (active_panel)
error |= drm_panel_notifier_register(active_panel,
&info->notifier);
#endif
if (error < OK)
logError(1, "%s %s Init after Probe error (ERROR = %08X)\n",
tag, __func__, error);
return error;
}
/*
* TODO: change this function according with the needs
* of customer in terms of feature to enable/disable
*/
static int fts_mode_handler(struct fts_ts_info *info, int force)
{
int res = OK;
int ret = OK;
/* initialize the mode to Nothing in order */
/* to be updated depending on the features enabled */
info->mode = MODE_NOTHING;
logError(0, "%s %s: Mode Handler starting...\n", tag, __func__);
switch (info->resume_bit) {
case 0:
/* screen down */
logError(0, "%s %s: Screen OFF...\n", tag, __func__);
/*
* do sense off in order to avoid the flooding
* of the fifo with touch events if someone is
* touching the panel during suspend
*/
logError(0, "%s %s: Sense OFF!\n", tag, __func__);
/*
*we need to use fts_command for speed reason
* (no need to check echo in this case and interrupt
* can be enabled)
*/
res |= fts_command(info, FTS_CMD_MS_MT_SENSE_OFF);
#ifdef PHONE_KEY
logError(0, "%s %s: Key OFF!\n", tag, __func__);
res |= fts_command(info, FTS_CMD_MS_KEY_OFF);
#endif
#ifdef PHONE_GESTURE
if (info->gesture_enabled == 1) {
logError(0, "%s %s: enter in gesture mode!\n",
tag, __func__);
ret = enterGestureMode(isSystemResettedDown());
if (ret >= OK) {
info->mode |= FEAT_GESTURE;
} else {
logError(1,
"%s %s:enterGestureMode failed!%08X recovery in senseOff\n",
tag, __func__, ret);
}
res |= ret;
}
#endif
if (info->mode != (FEAT_GESTURE|MODE_NOTHING)
|| info->gesture_enabled == 0)
info->mode |= MODE_SENSEOFF;
setSystemResettedDown(0);
break;
case 1:
/* screen up */
logError(0, "%s %s: Screen ON...\n", tag, __func__);
#ifdef FEAT_GLOVE
if ((info->glove_enabled == FEAT_ENABLE &&
isSystemResettedUp()) || force == 1) {
logError(0, "%s %s: Glove Mode setting...\n",
tag, __func__);
ret = featureEnableDisable(info->glove_enabled,
FEAT_GLOVE);
if (ret < OK) {
logError(1,
"%s %s:error in setting GLOVE_MODE!%08X\n",
tag, __func__, ret);
}
res |= ret;
if (ret >= OK && info->glove_enabled == FEAT_ENABLE) {
info->mode |= FEAT_GLOVE;
logError(1, "%s %s: GLOVE_MODE Enabled!\n",
tag, __func__);
} else {
logError(1, "%s %s: GLOVE_MODE Disabled!\n",
tag, __func__);
}
}
#endif
#ifdef FEAT_STYLUS
if ((info->stylus_enabled == FEAT_ENABLE &&
isSystemResettedUp()) || force == 1) {
logError(0, "%s %s: Stylus Mode setting...\n",
tag, __func__);
ret = featureEnableDisable(info->stylus_enabled,
FEAT_STYLUS);
if (ret < OK) {
logError(1,
"%s %s:error in set STYLUS_MODE!%08X\n",
tag, __func__, ret);
}
res |= ret;
if (ret >= OK && info->stylus_enabled == FEAT_ENABLE) {
info->mode |= FEAT_STYLUS;
logError(1, "%s %s: STYLUS_MODE Enabled!\n",
tag, __func__);
} else {
logError(1, "%s %s: STYLUS_MODE Disabled!\n",
tag, __func__);
}
}
#endif
#ifdef FEAT_COVER
if ((info->cover_enabled == FEAT_ENABLE &&
isSystemResettedUp()) || force == 1) {
logError(0, "%s %s: Cover Mode setting...\n",
tag, __func__);
ret = featureEnableDisable(info->cover_enabled,
FEAT_COVER);
if (ret < OK) {
logError(1,
"%s %s:error setting COVER_MODE!%08X\n",
tag, __func__, ret);
}
res |= ret;
if (ret >= OK && info->cover_enabled == FEAT_ENABLE) {
info->mode |= FEAT_COVER;
logError(1, "%s %s: COVER_MODE Enabled!\n",
tag, __func__);
} else {
logError(1, "%s %s: COVER_MODE Disabled!\n",
tag, __func__);
}
}
#endif
#ifdef FEAT_CHARGER
if ((info->charger_enabled == FEAT_ENABLE &&
isSystemResettedUp()) || force == 1) {
logError(0, "%s %s: Charger Mode setting...\n",
tag, __func__);
ret = featureEnableDisable(info->charger_enabled,
FEAT_CHARGER);
if (ret < OK) {
logError(1,
"%s %s:error set CHARGER_MODE!%08X\n",
tag, __func__, ret);
}
res |= ret;
if (ret >= OK && info->charger_enabled == FEAT_ENABLE) {
info->mode |= FEAT_CHARGER;
logError(1, "%s %s: CHARGER_MODE Enabled!\n",
tag, __func__);
} else {
logError(1, "%s %s: CHARGER_MODE Disabled!\n",
tag, __func__);
}
}
#endif
#ifdef FEAT_VR
if ((info->vr_enabled == FEAT_ENABLE &&
isSystemResettedUp()) || force == 1) {
logError(0, "%s %s: Vr Mode setting\n", tag, __func__);
ret = featureEnableDisable(info->vr_enabled, FEAT_VR);
if (ret < OK) {
logError(1,
"%s %s:error setting VR_MODE!:%08X\n",
tag, __func__, ret);
}
res |= ret;
if (ret >= OK && info->vr_enabled == FEAT_ENABLE) {
info->mode |= FEAT_VR;
logError(1, "%s %s: VR_MODE Enabled!\n",
tag, __func__);
} else {
logError(1, "%s %s: VR_MODE Disabled!\n",
tag, __func__);
}
}
#endif
#ifdef FEAT_EDGE_REJECTION
if ((info->edge_rej_enabled == FEAT_ENABLE &&
isSystemResettedUp()) || force == 1) {
logError(0, "%s %s: Edge Rejection Mode setting\n",
tag, __func__);
ret = featureEnableDisable(info->edge_rej_enabled,
FEAT_EDGE_REJECTION);
if (ret < OK) {
logError(1,
"%s %s:err set EDGE_REJECTION_MODE!%08X\n",
tag, __func__, ret);
}
res |= ret;
if (ret >= OK && info->edge_rej_enabled ==
FEAT_ENABLE) {
info->mode |= FEAT_EDGE_REJECTION;
logError(1,
"%s %s:EDGE_REJECTION_MODE Enabled!\n",
tag, __func__);
} else {
logError(1,
"%s %s:EDGE_REJECTION_MODE Disabled!\n",
tag, __func__);
}
}
#endif
#ifdef FEAT_CORNER_REJECTION
if ((info->corner_rej_enabled == FEAT_ENABLE &&
isSystemResettedUp()) || force == 1) {
logError(0, "%s %s: Corner rejection Mode setting\n",
tag, __func__);
ret = featureEnableDisable(info->corner_rej_enabled,
FEAT_CORNER_REJECTION);
if (ret < OK) {
logError(1,
"%s%s:err CORNER_REJECTION_MODE!%08X\n",
tag, __func__, ret);
}
res |= ret;
if (ret >= OK && info->corner_rej_enabled ==
FEAT_ENABLE) {
info->mode |= FEAT_CORNER_REJECTION;
logError(1,
"%s%s:CORNER_REJECTION_MODE Enabled!\n",
tag, __func__);
} else {
logError(1,
"%s%s:CORNER_REJECTION_MODE Disabled\n",
tag, __func__);
}
}
#endif
#ifdef FEAT_EDGE_PALM_REJECTION
if ((info->edge_palm_rej_enabled == FEAT_ENABLE &&
isSystemResettedUp()) || force == 1) {
logError(0, "%s %s:Edge Palm rejection Mode setting\n",
tag, __func__);
ret = featureEnableDisable(info->edge_palm_rej_enabled,
FEAT_EDGE_PALM_REJECTION);
if (ret < OK) {
logError(1,
"%s %s:err EDGE_PALM_REJECTION_MODE!%08X\n",
tag, __func__, ret);
}
res |= ret;
if (ret >= OK && info->edge_palm_rej_enabled ==
FEAT_ENABLE) {
info->mode |= FEAT_EDGE_PALM_REJECTION;
logError(1,
"%s %s:EDGE_PALM_REJECTION_MODE Enabled!\n",
tag, __func__);
} else {
logError(1,
"%s %s:EDGE_PALM_REJECTION_MODE Disabled!\n",
tag, __func__);
}
}
#endif
logError(0, "%s %s: Sense ON!\n", tag, __func__);
res |= fts_command(info, FTS_CMD_MS_MT_SENSE_ON);
info->mode |= MODE_SENSEON;
#ifdef PHONE_KEY
logError(0, "%s %s: Key ON!\n", tag, __func__);
res |= fts_command(info, FTS_CMD_MS_KEY_ON);
#endif
setSystemResettedUp(0);
break;
default:
logError(1,
"%s %s: invalid resume_bit value = %d! ERROR %08X\n",
tag, __func__, info->resume_bit, ERROR_OP_NOT_ALLOW);
res = ERROR_OP_NOT_ALLOW;
}
logError(0, "%s %s: Mode Handler finished! res = %08X\n", tag, __func__,
res);
return res;
}
static int fts_chip_power_switch(struct fts_ts_info *info, bool on)
{
int error = -1;
if (info->bdata->pwr_on_suspend) {
if (!info->ts_pinctrl)
return 0;
if (on) {
error = pinctrl_select_state(info->ts_pinctrl,
info->pinctrl_state_active);
if (error < 0)
logError(1, "%s: Failed to select %s\n",
__func__, PINCTRL_STATE_ACTIVE);
} else {
error = pinctrl_select_state(info->ts_pinctrl,
info->pinctrl_state_suspend);
if (error < 0)
logError(1, "%s: Failed to select %s\n",
__func__, PINCTRL_STATE_SUSPEND);
}
return 0;
}
if (on) {
if (info->bus_reg) {
error = regulator_enable(info->bus_reg);
if (error < 0)
logError(1, "%s %s: Failed to enable AVDD\n",
tag, __func__);
}
if (info->pwr_reg) {
error = regulator_enable(info->pwr_reg);
if (error < 0)
logError(1, "%s %s: Failed to enable DVDD\n",
tag, __func__);
}
if (info->ts_pinctrl) {
if (pinctrl_select_state(info->ts_pinctrl,
info->pinctrl_state_active) < 0) {
logError(1, "%s: Failed to select %s\n",
__func__, PINCTRL_STATE_ACTIVE);
}
}
} else {
if (info->bdata->reset_gpio != GPIO_NOT_DEFINED)
gpio_set_value(info->bdata->reset_gpio, 0);
else
msleep(300);
if (info->ts_pinctrl) {
if (pinctrl_select_state(info->ts_pinctrl,
info->pinctrl_state_suspend) < 0) {
logError(1, "%s: Failed to select %s\n",
__func__, PINCTRL_STATE_SUSPEND);
}
}
if (info->pwr_reg) {
error = regulator_disable(info->pwr_reg);
if (error < 0)
logError(1, "%s %s: Failed to disable DVDD\n",
tag, __func__);
}
if (info->bus_reg) {
error = regulator_disable(info->bus_reg);
if (error < 0)
logError(1, "%s %s: Failed to disable AVDD\n",
tag, __func__);
}
}
return error;
}
static void fts_resume_work(struct work_struct *work)
{
struct fts_ts_info *info;
info = container_of(work, struct fts_ts_info, resume_work);
__pm_wakeup_event(info->wakeup_source, HZ);
fts_chip_power_switch(info, true);
info->resume_bit = 1;
fts_system_reset();
#ifdef USE_NOISE_PARAM
readNoiseParameters(noise_params);
#endif
#ifdef USE_NOISE_PARAM
writeNoiseParameters(noise_params);
#endif
release_all_touches(info);
fts_mode_handler(info, 0);
info->sensor_sleep = false;
fts_interrupt_enable(info);
}
static void fts_suspend_work(struct work_struct *work)
{
struct fts_ts_info *info;
info = container_of(work, struct fts_ts_info, suspend_work);
#ifdef CONFIG_ST_TRUSTED_TOUCH
if (atomic_read(&info->trusted_touch_enabled))
wait_for_completion_interruptible(
&info->trusted_touch_powerdown);
#endif
__pm_wakeup_event(info->wakeup_source, HZ);
info->resume_bit = 0;
fts_mode_handler(info, 0);
fts_interrupt_disable(info);
release_all_touches(info);
info->sensor_sleep = true;
fts_chip_power_switch(info, false);
}
#if defined(CONFIG_FB_MSM)
static int fts_fb_state_chg_callback(struct notifier_block *nb,
unsigned long val, void *data)
{
struct fts_ts_info *info = container_of(nb,
struct fts_ts_info, notifier);
struct fb_event *evdata = data;
unsigned int blank;
if (!evdata || (evdata->id != 0))
return 0;
if (val != FB_EVENT_BLANK)
return 0;
logError(0, "%s %s: fts notifier begin!\n", tag, __func__);
if (evdata->data && val == FB_EVENT_BLANK && info) {
blank = *(int *) (evdata->data);
switch (blank) {
case FB_BLANK_POWERDOWN:
if (info->sensor_sleep)
break;
logError(0, "%s %s: FB_BLANK_POWERDOWN\n",
tag, __func__);
queue_work(info->event_wq, &info->suspend_work);
break;
case FB_BLANK_UNBLANK:
if (!info->sensor_sleep)
break;
logError(0, "%s %s: FB_BLANK_UNBLANK\n",
tag, __func__);
queue_work(info->event_wq, &info->resume_work);
break;
default:
break;
}
}
return NOTIFY_OK;
}
#else
static int fts_fb_state_chg_callback(struct notifier_block *nb,
unsigned long val, void *data)
{
struct fts_ts_info *info = container_of(nb, struct fts_ts_info,
notifier);
struct drm_panel_notifier *evdata = data;
unsigned int blank;
if (!evdata)
return 0;
if (val != DRM_PANEL_EVENT_BLANK)
return 0;
logError(0, "%s %s: fts notifier begin!\n", tag, __func__);
if (evdata->data && val == DRM_PANEL_EVENT_BLANK && info) {
blank = *(int *) (evdata->data);
switch (blank) {
case DRM_PANEL_BLANK_POWERDOWN:
if (info->sensor_sleep && info->aoi_notify_enabled)
break;
if (info->aoi_notify_enabled)
info->aoi_wake_on_suspend = true;
else
info->aoi_wake_on_suspend = false;
if (info->aoi_wake_on_suspend) {
info->sensor_sleep = true;
__pm_stay_awake(info->wakeup_source);
} else {
queue_work(info->event_wq, &info->suspend_work);
}
break;
case DRM_PANEL_BLANK_UNBLANK:
if (info->aoi_wake_on_suspend)
__pm_relax(info->wakeup_source);
if (!info->sensor_sleep)
break;
if (!info->resume_bit)
queue_work(info->event_wq, &info->resume_work);
if (info->aoi_wake_on_suspend)
info->sensor_sleep = false;
break;
default:
break;
}
}
return NOTIFY_OK;
}
#endif
static struct notifier_block fts_noti_block = {
.notifier_call = fts_fb_state_chg_callback,
};
static int fts_pinctrl_init(struct fts_ts_info *info)
{
int retval;
/* Get pinctrl if target uses pinctrl */
info->ts_pinctrl = devm_pinctrl_get(info->dev);
if (IS_ERR_OR_NULL(info->ts_pinctrl)) {
retval = PTR_ERR(info->ts_pinctrl);
logError(1, "Target does not use pinctrl %d\n", retval);
goto err_pinctrl_get;
}
info->pinctrl_state_active
= pinctrl_lookup_state(info->ts_pinctrl, PINCTRL_STATE_ACTIVE);
if (IS_ERR_OR_NULL(info->pinctrl_state_active)) {
retval = PTR_ERR(info->pinctrl_state_active);
logError(1, "Can not lookup %s pinstate %d\n",
PINCTRL_STATE_ACTIVE, retval);
goto err_pinctrl_lookup;
}
info->pinctrl_state_suspend
= pinctrl_lookup_state(info->ts_pinctrl, PINCTRL_STATE_SUSPEND);
if (IS_ERR_OR_NULL(info->pinctrl_state_suspend)) {
retval = PTR_ERR(info->pinctrl_state_suspend);
logError(1, "Can not lookup %s pinstate %d\n",
PINCTRL_STATE_SUSPEND, retval);
goto err_pinctrl_lookup;
}
info->pinctrl_state_release
= pinctrl_lookup_state(info->ts_pinctrl, PINCTRL_STATE_RELEASE);
if (IS_ERR_OR_NULL(info->pinctrl_state_release)) {
retval = PTR_ERR(info->pinctrl_state_release);
logError(1, "Can not lookup %s pinstate %d\n",
PINCTRL_STATE_RELEASE, retval);
}
return 0;
err_pinctrl_lookup:
devm_pinctrl_put(info->ts_pinctrl);
err_pinctrl_get:
info->ts_pinctrl = NULL;
return retval;
}
static int fts_get_reg(struct fts_ts_info *info, bool get)
{
int retval;
const struct fts_i2c_platform_data *bdata = info->bdata;
if (!get) {
retval = 0;
goto regulator_put;
}
if ((bdata->pwr_reg_name != NULL) && (*bdata->pwr_reg_name != 0)) {
info->pwr_reg = regulator_get(info->dev,
bdata->pwr_reg_name);
if (IS_ERR(info->pwr_reg)) {
logError(1, "%s %s: Failed to get power regulator\n",
tag, __func__);
retval = PTR_ERR(info->pwr_reg);
goto regulator_put;
}
retval = regulator_set_load(info->pwr_reg, FTS_DVDD_LOAD);
if (retval < 0) {
logError(1, "%s %s: Failed to set power load\n",
tag, __func__);
goto regulator_put;
}
retval = regulator_set_voltage(info->pwr_reg,
FTS_DVDD_VOL_MIN, FTS_DVDD_VOL_MAX);
if (retval < 0) {
logError(1, "%s %s: Failed to set power voltage\n",
tag, __func__);
goto regulator_put;
}
}
if ((bdata->bus_reg_name != NULL) && (*bdata->bus_reg_name != 0)) {
info->bus_reg = regulator_get(info->dev,
bdata->bus_reg_name);
if (IS_ERR(info->bus_reg)) {
logError(1,
"%s %s:Failed to get bus pullup regulator\n",
tag, __func__);
retval = PTR_ERR(info->bus_reg);
goto regulator_put;
}
retval = regulator_set_load(info->bus_reg, FTS_AVDD_LOAD);
if (retval < 0) {
logError(1, "%s %s: Failed to set power load\n",
tag, __func__);
goto regulator_put;
}
retval = regulator_set_voltage(info->bus_reg,
FTS_AVDD_VOL_MIN, FTS_AVDD_VOL_MAX);
if (retval < 0) {
logError(1, "%s %s: Failed to set power voltage\n",
tag, __func__);
goto regulator_put;
}
}
return 0;
regulator_put:
if (info->pwr_reg) {
regulator_put(info->pwr_reg);
info->pwr_reg = NULL;
}
if (info->bus_reg) {
regulator_put(info->bus_reg);
info->bus_reg = NULL;
}
return retval;
}
static int fts_enable_reg(struct fts_ts_info *info,
bool enable)
{
int retval;
if (!enable) {
retval = 0;
goto disable_pwr_reg;
}
if (info->bus_reg) {
retval = regulator_enable(info->bus_reg);
if (retval < 0) {
logError(1, "%s %s: Failed to enable bus regulator\n",
tag, __func__);
goto exit;
}
}
if (info->pwr_reg) {
retval = regulator_enable(info->pwr_reg);
if (retval < 0) {
logError(1, "%s %s: Failed to enable power regulator\n",
tag, __func__);
goto disable_bus_reg;
}
}
return OK;
disable_pwr_reg:
if (info->pwr_reg)
regulator_disable(info->pwr_reg);
disable_bus_reg:
if (info->bus_reg)
regulator_disable(info->bus_reg);
exit:
return retval;
}
static int fts_gpio_setup(int gpio, bool config, int dir, int state)
{
int retval = 0;
unsigned char buf[16];
if (config) {
snprintf(buf, 16, "fts_gpio_%u\n", gpio);
retval = gpio_request(gpio, buf);
if (retval) {
logError(1, "%s %s: Failed to get gpio %d (code: %d)",
tag, __func__, gpio, retval);
return retval;
}
if (dir == 0)
retval = gpio_direction_input(gpio);
else
retval = gpio_direction_output(gpio, state);
if (retval) {
logError(1, "%s %s: Failed to set gpio %d direction",
tag, __func__, gpio);
return retval;
}
} else {
gpio_free(gpio);
}
return retval;
}
static int fts_set_gpio(struct fts_ts_info *info)
{
int retval;
const struct fts_i2c_platform_data *bdata =
info->bdata;
retval = fts_gpio_setup(bdata->irq_gpio, true, 0, 0);
if (retval < 0) {
logError(1, "%s %s: Failed to configure irq GPIO\n",
tag, __func__);
goto err_gpio_irq;
}
if (bdata->reset_gpio >= 0) {
retval = fts_gpio_setup(bdata->reset_gpio, true, 1, 0);
if (retval < 0) {
logError(1, "%s %s: Failed to configure reset GPIO\n",
tag, __func__);
goto err_gpio_reset;
}
}
if (bdata->reset_gpio >= 0) {
gpio_set_value(bdata->reset_gpio, 0);
msleep(20);
gpio_set_value(bdata->reset_gpio, 1);
}
setResetGpio(bdata->reset_gpio);
return OK;
err_gpio_reset:
fts_gpio_setup(bdata->irq_gpio, false, 0, 0);
setResetGpio(GPIO_NOT_DEFINED);
err_gpio_irq:
return retval;
}
static int parse_dt(struct device *dev,
struct fts_i2c_platform_data *bdata)
{
int retval;
const char *name;
struct device_node *np = dev->of_node;
bdata->irq_gpio = of_get_named_gpio_flags(np,
"st,irq-gpio", 0, NULL);
logError(0, "%s irq_gpio = %d\n", tag, bdata->irq_gpio);
bdata->pwr_on_suspend =
of_property_read_bool(np, "st,power_on_suspend");
retval = of_property_read_string(np, "st,regulator_dvdd", &name);
if (retval == -EINVAL)
bdata->pwr_reg_name = NULL;
else if (retval < 0)
return retval;
bdata->pwr_reg_name = name;
logError(0, "%s pwr_reg_name = %s\n", tag, name);
retval = of_property_read_string(np, "st,regulator_avdd", &name);
if (retval == -EINVAL)
bdata->bus_reg_name = NULL;
else if (retval < 0)
return retval;
bdata->bus_reg_name = name;
logError(0, "%s bus_reg_name = %s\n", tag, name);
if (of_property_read_bool(np, "st,reset-gpio")) {
bdata->reset_gpio = of_get_named_gpio_flags(np,
"st,reset-gpio", 0, NULL);
logError(0, "%s reset_gpio =%d\n", tag, bdata->reset_gpio);
} else {
bdata->reset_gpio = GPIO_NOT_DEFINED;
}
bdata->x_flip = of_property_read_bool(np, "st,x-flip");
bdata->y_flip = of_property_read_bool(np, "st,y-flip");
return OK;
}
static int check_dt(struct device_node *np)
{
int i;
int count;
struct device_node *node;
struct drm_panel *panel;
count = of_count_phandle_with_args(np, "panel", NULL);
if (count <= 0)
return OK;
for (i = 0; i < count; i++) {
node = of_parse_phandle(np, "panel", i);
panel = of_drm_find_panel(node);
of_node_put(node);
if (!IS_ERR(panel)) {
active_panel = panel;
return OK;
}
}
return PTR_ERR(panel);
}
static int check_default_tp(struct device_node *dt, const char *prop)
{
const char *active_tp;
const char *compatible;
char *start;
int ret;
ret = of_property_read_string(dt->parent, prop, &active_tp);
if (ret) {
pr_err(" %s:fail to read %s %d\n", __func__, prop, ret);
return -ENODEV;
}
ret = of_property_read_string(dt, "compatible", &compatible);
if (ret < 0) {
pr_err(" %s:fail to read %s %d\n", __func__, "compatible", ret);
return -ENODEV;
}
start = strnstr(active_tp, compatible, strlen(active_tp));
if (start == NULL) {
pr_err(" %s:no match compatible, %s, %s\n",
__func__, compatible, active_tp);
ret = -ENODEV;
}
return ret;
}
static int fts_probe_delayed(struct fts_ts_info *info)
{
int error = 0;
int retval = 0;
/* Avoid setting up hardware for TVM during probe */
#ifdef CONFIG_ST_TRUSTED_TOUCH
#ifdef CONFIG_ARCH_QTI_VM
if (!atomic_read(&info->delayed_vm_probe_pending)) {
atomic_set(&info->delayed_vm_probe_pending, 1);
return 0;
}
goto tvm_setup;
#endif
#endif
logError(0, "%s SET Regulators:\n", tag);
retval = fts_get_reg(info, true);
if (retval < 0) {
logError(1, "%s ERROR: %s: Failed to get regulators\n",
tag, __func__);
goto Exit_1;
}
retval = fts_enable_reg(info, true);
if (retval < 0) {
logError(1,
"%s %s: ERROR Failed to enable regulators\n",
tag, __func__);
goto Exit_2;
}
logError(0, "%s SET GPIOS:\n", tag);
retval = fts_set_gpio(info);
if (retval < 0) {
logError(1, "%s %s: ERROR Failed to set up GPIO's\n",
tag, __func__);
goto Exit_2;
}
info->client->irq = gpio_to_irq(info->bdata->irq_gpio);
retval = fts_pinctrl_init(info);
if (!retval && info->ts_pinctrl) {
/*
* Pinctrl handle is optional. If pinctrl handle is
* found let pins to be configured in active state.
* If not found continue further without error.
*/
retval = pinctrl_select_state(info->ts_pinctrl,
info->pinctrl_state_active);
if (retval < 0) {
logError(1,
"%s: Failed to select %s pinstate %d\n",
__func__, PINCTRL_STATE_ACTIVE, retval);
}
}
#ifdef CONFIG_ARCH_QTI_VM
tvm_setup:
#endif
/* init hardware device */
logError(0, "%s Device Initialization:\n", tag);
error = fts_init(info);
if (error < OK) {
logError(1, "%s Cannot initialize the device ERROR %08X\n",
tag, error);
error = -ENODEV;
#ifdef CONFIG_ARCH_QTI_VM
return error;
#endif
goto Exit_3;
}
queue_delayed_work(info->fwu_workqueue, &info->fwu_work,
msecs_to_jiffies(EXP_FN_WORK_DELAY_MS));
return error;
Exit_3:
if (info->ts_pinctrl) {
if (IS_ERR_OR_NULL(info->pinctrl_state_release)) {
devm_pinctrl_put(info->ts_pinctrl);
info->ts_pinctrl = NULL;
} else {
if (pinctrl_select_state(info->ts_pinctrl,
info->pinctrl_state_release))
logError(1, "%s:Failed to select %s pinstate\n",
__func__, PINCTRL_STATE_RELEASE);
}
}
fts_enable_reg(info, false);
fts_gpio_setup(info->bdata->irq_gpio, false, 0, 0);
fts_gpio_setup(info->bdata->reset_gpio, false, 0, 0);
Exit_2:
fts_get_reg(info, false);
Exit_1:
return error;
}
static int fts_probe_internal(struct i2c_client *client,
const struct i2c_device_id *idp)
{
struct fts_ts_info *info = NULL;
int error = 0;
struct device_node *dp = client->dev.of_node;
int skip_5_1 = 0;
logError(0, "%s %s: driver probe begin!\n", tag, __func__);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
logError(1, "%s Unsupported I2C functionality\n", tag);
error = -EIO;
goto ProbeErrorExit_0;
}
openChannel(client);
info = kzalloc(sizeof(struct fts_ts_info), GFP_KERNEL);
if (!info) {
logError(1,
"%s can't allocate struct info!\n",
tag);
error = -ENOMEM;
goto ProbeErrorExit_0;
}
info->client = client;
i2c_set_clientdata(client, info);
info->i2c_data = kmalloc(I2C_DATA_MAX_LEN, GFP_KERNEL);
if (info->i2c_data == NULL) {
error = -ENOMEM;
goto ProbeErrorExit_0P1;
}
info->i2c_data_len = I2C_DATA_MAX_LEN;
logError(0, "%s i2c address: %x\n", tag, client->addr);
info->dev = &info->client->dev;
if (dp) {
info->bdata = devm_kzalloc(&client->dev,
sizeof(struct fts_i2c_platform_data),
GFP_KERNEL);
if (!info->bdata) {
logError(1, "%s ERROR:info.bdata kzalloc failed\n",
tag);
goto ProbeErrorExit_1;
}
parse_dt(&client->dev, info->bdata);
}
logError(0, "%s SET Auto Fw Update:\n", tag);
info->fwu_workqueue = alloc_workqueue("fts-fwu-queue",
WQ_UNBOUND|WQ_HIGHPRI|WQ_CPU_INTENSIVE, 1);
if (!info->fwu_workqueue) {
logError(1, "%s ERROR: Cannot create fwu work thread\n", tag);
goto ProbeErrorExit_1;
}
INIT_DELAYED_WORK(&info->fwu_work, fts_fw_update_auto);
logError(0, "%s SET Event Handler:\n", tag);
info->wakeup_source = wakeup_source_register(&client->dev,
dev_name(&client->dev));
info->event_wq = alloc_workqueue("fts-event-queue",
WQ_UNBOUND|WQ_HIGHPRI|WQ_CPU_INTENSIVE, 1);
if (!info->event_wq) {
logError(1, "%s ERROR: Cannot create work thread\n", tag);
error = -ENOMEM;
goto ProbeErrorExit_4;
}
INIT_WORK(&info->work, fts_event_handler);
INIT_WORK(&info->resume_work, fts_resume_work);
INIT_WORK(&info->suspend_work, fts_suspend_work);
logError(0, "%s SET Input Device Property:\n", tag);
/* info->dev = &info->client->dev; */
info->input_dev = input_allocate_device();
if (!info->input_dev) {
logError(1, "%s ERROR: No such input device defined!\n",
tag);
error = -ENODEV;
goto ProbeErrorExit_5;
}
info->input_dev->dev.parent = &client->dev;
info->input_dev->name = FTS_TS_DRV_NAME;
snprintf(fts_ts_phys, sizeof(fts_ts_phys), "%s/input0",
info->input_dev->name);
info->input_dev->phys = fts_ts_phys;
info->input_dev->id.bustype = BUS_I2C;
info->input_dev->id.vendor = 0x0001;
info->input_dev->id.product = 0x0002;
info->input_dev->id.version = 0x0100;
__set_bit(EV_SYN, info->input_dev->evbit);
__set_bit(EV_KEY, info->input_dev->evbit);
__set_bit(EV_ABS, info->input_dev->evbit);
__set_bit(BTN_TOUCH, info->input_dev->keybit);
__set_bit(BTN_TOOL_FINGER, info->input_dev->keybit);
input_mt_init_slots(info->input_dev, TOUCH_ID_MAX, INPUT_MT_DIRECT);
input_set_abs_params(info->input_dev, ABS_MT_POSITION_X,
X_AXIS_MIN, X_AXIS_MAX, 0, 0);
input_set_abs_params(info->input_dev, ABS_MT_POSITION_Y,
Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
input_set_abs_params(info->input_dev, ABS_MT_TOUCH_MAJOR,
AREA_MIN, AREA_MAX, 0, 0);
input_set_abs_params(info->input_dev, ABS_MT_TOUCH_MINOR,
AREA_MIN, AREA_MAX, 0, 0);
#ifdef PHONE_GESTURE
input_set_capability(info->input_dev, EV_KEY, KEY_WAKEUP);
input_set_capability(info->input_dev, EV_KEY, KEY_M);
input_set_capability(info->input_dev, EV_KEY, KEY_O);
input_set_capability(info->input_dev, EV_KEY, KEY_E);
input_set_capability(info->input_dev, EV_KEY, KEY_W);
input_set_capability(info->input_dev, EV_KEY, KEY_C);
input_set_capability(info->input_dev, EV_KEY, KEY_L);
input_set_capability(info->input_dev, EV_KEY, KEY_F);
input_set_capability(info->input_dev, EV_KEY, KEY_V);
input_set_capability(info->input_dev, EV_KEY, KEY_S);
input_set_capability(info->input_dev, EV_KEY, KEY_Z);
input_set_capability(info->input_dev, EV_KEY, KEY_WWW);
input_set_capability(info->input_dev, EV_KEY, KEY_LEFT);
input_set_capability(info->input_dev, EV_KEY, KEY_RIGHT);
input_set_capability(info->input_dev, EV_KEY, KEY_UP);
input_set_capability(info->input_dev, EV_KEY, KEY_DOWN);
input_set_capability(info->input_dev, EV_KEY, KEY_F1);
input_set_capability(info->input_dev, EV_KEY, KEY_F2);
input_set_capability(info->input_dev, EV_KEY, KEY_F3);
input_set_capability(info->input_dev, EV_KEY, KEY_F4);
input_set_capability(info->input_dev, EV_KEY, KEY_F5);
input_set_capability(info->input_dev, EV_KEY, KEY_LEFTBRACE);
input_set_capability(info->input_dev, EV_KEY, KEY_RIGHTBRACE);
#endif
#ifdef PHONE_KEY
/* KEY associated to the touch screen buttons */
input_set_capability(info->input_dev, EV_KEY, KEY_HOMEPAGE);
input_set_capability(info->input_dev, EV_KEY, KEY_BACK);
input_set_capability(info->input_dev, EV_KEY, KEY_MENU);
#endif
mutex_init(&(info->input_report_mutex));
#ifdef PHONE_GESTURE
mutex_init(&gestureMask_mutex);
#endif
/* register the multi-touch input device */
error = input_register_device(info->input_dev);
if (error) {
logError(1, "%s ERROR: No such input device\n", tag);
error = -ENODEV;
goto ProbeErrorExit_5_1;
}
skip_5_1 = 1;
/* track slots */
info->touch_id = 0;
#ifdef STYLUS_MODE
info->stylus_id = 0;
#endif
/*
* init feature switches (by default all the features
* are disable, if one feature want to be enabled from
* the start, set the corresponding value to 1)
*/
info->gesture_enabled = 0;
info->glove_enabled = 0;
info->charger_enabled = 0;
info->stylus_enabled = 0;
info->vr_enabled = 0;
info->cover_enabled = 0;
info->edge_rej_enabled = 0;
info->corner_rej_enabled = 0;
info->edge_palm_rej_enabled = 0;
info->resume_bit = 1;
info->notifier = fts_noti_block;
#ifdef CONFIG_ST_TRUSTED_TOUCH
fts_trusted_touch_init(info);
mutex_init(&(info->fts_clk_io_ctrl_mutex));
#endif
logError(0, "%s SET Device File Nodes:\n", tag);
/* sysfs stuff */
info->attrs.attrs = fts_attr_group;
error = sysfs_create_group(&client->dev.kobj, &info->attrs);
if (error) {
logError(1, "%s ERROR: Cannot create sysfs structure!\n", tag);
error = -ENODEV;
goto ProbeErrorExit_7;
}
/* I2C cmd */
fts_cmd_class = class_create(THIS_MODULE, FTS_TS_DRV_NAME);
#ifdef SCRIPTLESS
info->i2c_cmd_dev = device_create(fts_cmd_class,
NULL, DCHIP_ID_0, info, "fts_i2c");
if (IS_ERR(info->i2c_cmd_dev)) {
logError(1,
"%s ERROR: Failed to create device for the sysfs!\n",
tag);
goto ProbeErrorExit_8;
}
dev_set_drvdata(info->i2c_cmd_dev, info);
error = sysfs_create_group(&info->i2c_cmd_dev->kobj,
&i2c_cmd_attr_group);
if (error) {
logError(1, "%s ERROR: Failed to create sysfs group!\n", tag);
goto ProbeErrorExit_9;
}
#endif
#ifdef DRIVER_TEST
info->test_cmd_dev = device_create(fts_cmd_class,
NULL, DCHIP_ID_0, info, "fts_driver_test");
if (IS_ERR(info->test_cmd_dev)) {
logError(1,
"%s ERROR: Failed to create device for the sysfs!\n",
tag);
goto ProbeErrorExit_10;
}
dev_set_drvdata(info->test_cmd_dev, info);
error = sysfs_create_group(&info->test_cmd_dev->kobj,
&test_cmd_attr_group);
if (error) {
logError(1, "%s ERROR: Failed to create sysfs group!\n", tag);
goto ProbeErrorExit_11;
}
#endif
info->aoi_cmd_dev = device_create(fts_cmd_class,
NULL, DCHIP_ID_0, info, "touch_aoi");
if (IS_ERR(info->aoi_cmd_dev)) {
logError(1,
"%s ERROR: Failed to create device for the sysfs\n",
tag);
goto ProbeErrorExit_10;
}
dev_set_drvdata(info->aoi_cmd_dev, info);
error = sysfs_create_group(&info->aoi_cmd_dev->kobj,
&aoi_cmd_attr_group);
if (error) {
logError(1, "%s ERROR: Failed to create sysfs group\n", tag);
goto ProbeErrorExit_11;
}
info->aoi_class = class_create(THIS_MODULE, "android_touch");
if (info->aoi_class) {
info->aoi_dev = device_create(info->aoi_class,
NULL, DCHIP_ID_0, info, "touch");
if (!IS_ERR(info->aoi_dev)) {
dev_set_drvdata(info->aoi_dev, info);
error = sysfs_create_group(&info->aoi_dev->kobj,
&aoi_enable_attr_group);
}
}
error = fts_probe_delayed(info);
if (error) {
logError(1, "%s ERROR: Failed to enable resources\n",
tag);
goto ProbeErrorExit_11;
}
logError(1, "%s Probe Finished!\n", tag);
return OK;
/* error exit path */
#ifdef DRIVER_TEST
ProbeErrorExit_11:
#ifndef SCRIPTLESS
device_destroy(fts_cmd_class, DCHIP_ID_0);
#endif
ProbeErrorExit_10:
#ifndef SCRIPTLESS
sysfs_remove_group(&client->dev.kobj, &info->attrs);
#endif
#endif
#ifdef SCRIPTLESS
ProbeErrorExit_9:
device_destroy(fts_cmd_class, DCHIP_ID_0);
ProbeErrorExit_8:
sysfs_remove_group(&client->dev.kobj, &info->attrs);
#endif
ProbeErrorExit_7:
#ifdef CONFIG_ST_TRUSTED_TOUCH
fts_vm_deinit(info);
#endif
/* fb_unregister_client(&info->notifier); */
input_unregister_device(info->input_dev);
ProbeErrorExit_5_1:
if (skip_5_1 != 1)
input_free_device(info->input_dev);
ProbeErrorExit_5:
destroy_workqueue(info->event_wq);
ProbeErrorExit_4:
destroy_workqueue(info->fwu_workqueue);
wakeup_source_unregister(info->wakeup_source);
ProbeErrorExit_1:
kfree(info->i2c_data);
ProbeErrorExit_0P1:
kfree(info);
ProbeErrorExit_0:
logError(1, "%s Probe Failed!\n", tag);
return error;
}
static int fts_probe(struct i2c_client *client, const struct i2c_device_id *idp)
{
int error = 0;
struct device_node *dp = client->dev.of_node;
error = check_dt(dp);
if (error == -EPROBE_DEFER)
return error;
if (error) {
if (!check_default_tp(dp, "qcom,i2c-touch-active"))
error = -EPROBE_DEFER;
else
error = -ENODEV;
return error;
}
device_init_wakeup(&client->dev, true);
return fts_probe_internal(client, idp);
}
static int fts_remove(struct i2c_client *client)
{
struct fts_ts_info *info = i2c_get_clientdata(client);
if (info->aoi_dev) {
sysfs_remove_group(&info->aoi_dev->kobj,
&aoi_enable_attr_group);
info->aoi_dev = NULL;
}
if (info->aoi_class) {
device_destroy(info->aoi_class, DCHIP_ID_0);
info->aoi_class = NULL;
}
#ifdef DRIVER_TEST
sysfs_remove_group(&info->test_cmd_dev->kobj,
&test_cmd_attr_group);
#endif
#ifdef SCRIPTLESS
/* I2C cmd */
sysfs_remove_group(&info->i2c_cmd_dev->kobj, &i2c_cmd_attr_group);
#endif
#if defined(SCRIPTLESS) || defined(DRIVER_TEST)
device_destroy(fts_cmd_class, DCHIP_ID_0);
#endif
/* sysfs stuff */
sysfs_remove_group(&client->dev.kobj, &info->attrs);
/* remove interrupt and event handlers */
fts_interrupt_uninstall(info);
#if defined(CONFIG_FB_MSM)
fb_unregister_client(&info->notifier);
#else
if (active_panel)
drm_panel_notifier_register(active_panel, &info->notifier);
#endif
/* unregister the device */
input_unregister_device(info->input_dev);
/* input_free_device(info->input_dev ); */
/* Empty the FIFO buffer */
fts_command(info, FIFO_CMD_FLUSH);
/* flushFIFO(); */
/* Remove the work thread */
destroy_workqueue(info->event_wq);
/* wake_lock_destroy(&info->wakelock); */
wakeup_source_unregister(info->wakeup_source);
destroy_workqueue(info->fwu_workqueue);
if (info->ts_pinctrl) {
if (IS_ERR_OR_NULL(info->pinctrl_state_release)) {
devm_pinctrl_put(info->ts_pinctrl);
info->ts_pinctrl = NULL;
} else {
pinctrl_select_state(info->ts_pinctrl,
info->pinctrl_state_release);
}
}
fts_enable_reg(info, false);
fts_gpio_setup(info->bdata->irq_gpio, false, 0, 0);
fts_gpio_setup(info->bdata->reset_gpio, false, 0, 0);
fts_get_reg(info, false);
/* free all */
kfree(info->i2c_data);
kfree(info);
device_init_wakeup(&client->dev, false);
return OK;
}
static const struct of_device_id fts_of_match_table[] = {
{
.compatible = "st,fts",
},
{},
};
static const struct i2c_device_id fts_device_id[] = {
{FTS_TS_DRV_NAME, 0},
{}
};
static struct i2c_driver fts_i2c_driver = {
.driver = {
.name = FTS_TS_DRV_NAME,
.of_match_table = fts_of_match_table,
},
.probe = fts_probe,
.remove = fts_remove,
.id_table = fts_device_id,
};
static int __init fts_driver_init(void)
{
return i2c_add_driver(&fts_i2c_driver);
}
static void __exit fts_driver_exit(void)
{
i2c_del_driver(&fts_i2c_driver);
}
module_init(fts_driver_init);
module_exit(fts_driver_exit);
MODULE_DESCRIPTION("STMicroelectronics MultiTouch IC Driver");
MODULE_LICENSE("GPL v2");