/*
* Copyright (c) 2011-2021 The Linux Foundation. All rights reserved.
* Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
*
* Previously licensed under the ISC license by Qualcomm Atheros, Inc.
*
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
/*
* This file was originally distributed by Qualcomm Atheros, Inc.
* under proprietary terms before Copyright ownership was assigned
* to the Linux Foundation.
*/
/**
* @file htt.h
*
* @details the public header file of HTT layer
*/
#ifndef _HTT_H_
#define _HTT_H_
#include <htt_deps.h>
#include <htt_common.h>
/*
* Unless explicitly specified to use 64 bits to represent physical addresses
* (or more precisely, bus addresses), default to 32 bits.
*/
#ifndef HTT_PADDR64
#define HTT_PADDR64 0
#endif
#ifndef offsetof
#define offsetof(type, field) ((unsigned int)(&((type *)0)->field))
#endif
/*
* HTT version history:
* 1.0 initial numbered version
* 1.1 modifications to STATS messages.
* These modifications are not backwards compatible, but since the
* STATS messages themselves are non-essential (they are for debugging),
* the 1.1 version of the HTT message library as a whole is compatible
* with the 1.0 version.
* 1.2 reset mask IE added to STATS_REQ message
* 1.3 stat config IE added to STATS_REQ message
*----
* 2.0 FW rx PPDU desc added to RX_IND message
* 2.1 Enable msdu_ext/frag_desc banking change for WIFI2.0
*----
* 3.0 Remove HTT_H2T_MSG_TYPE_MGMT_TX message
* 3.1 Added HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND message
* 3.2 Added HTT_H2T_MSG_TYPE_WDI_IPA_CFG,
* HTT_H2T_MSG_TYPE_WDI_IPA_OP_REQUEST messages
* 3.3 Added HTT_H2T_MSG_TYPE_AGGR_CFG_EX message
* 3.4 Added tx_compl_req flag in HTT tx descriptor
* 3.5 Added flush and fail stats in rx_reorder stats structure
* 3.6 Added frag flag in HTT RX INORDER PADDR IND header
* 3.7 Made changes to support EOS Mac_core 3.0
* 3.8 Added txq_group information element definition;
* added optional txq_group suffix to TX_CREDIT_UPDATE_IND message
* 3.9 Added HTT_T2H CHAN_CHANGE message;
* Allow buffer addresses in bus-address format to be stored as
* either 32 bits or 64 bits.
* 3.10 Add optional TLV extensions to the VERSION_REQ and VERSION_CONF
* messages to specify which HTT options to use.
* Initial TLV options cover:
* - whether to use 32 or 64 bits to represent LL bus addresses
* - whether to use TX_COMPL_IND or TX_CREDIT_UPDATE_IND in HL systems
* - how many tx queue groups to use
* 3.11 Expand rx debug stats:
* - Expand the rx_reorder_stats struct with stats about successful and
* failed rx buffer allcoations.
* - Add a new rx_remote_buffer_mgmt_stats struct with stats about
* the supply, allocation, use, and recycling of rx buffers for the
* "remote ring" of rx buffers in host member in LL systems.
* Add RX_REMOTE_RING_BUFFER_INFO stats type for uploading these stats.
* 3.12 Add "rx offload packet error" message with initial "MIC error" subtype
* 3.13 Add constants + macros to support 64-bit address format for the
* tx fragments descriptor, the rx ring buffer, and the rx ring
* index shadow register.
* 3.14 Add a method for the host to provide detailed per-frame tx specs:
* - Add htt_tx_msdu_desc_ext_t struct def.
* - Add TLV to specify whether the target supports the HTT tx MSDU
* extension descriptor.
* - Change a reserved bit in the HTT tx MSDU descriptor to an
* "extension" bit, to specify whether a HTT tx MSDU extension
* descriptor is present.
* 3.15 Add HW rx desc info to per-MSDU info elems in RX_IN_ORD_PADDR_IND msg.
* (This allows the host to obtain key information about the MSDU
* from a memory location already in the cache, rather than taking a
* cache miss for each MSDU by reading the HW rx descs.)
* 3.16 Add htt_pkt_type_eth2 and define pkt_subtype flags to indicate
* whether a copy-engine classification result is appended to TX_FRM.
* 3.17 Add a version of the WDI_IPA_CFG message; add RX_RING2 to WDI_IPA_CFG
* 3.18 Add a PEER_DEL tx completion indication status, for HL cleanup of
* tx frames in the target after the peer has already been deleted.
* 3.19 Add HTT_DBG_STATS_RX_RATE_INFO_V2 and HTT_DBG_STATS_TX_RATE_INFO_V2
* 3.20 Expand rx_reorder_stats.
* 3.21 Add optional rx channel spec to HL RX_IND.
* 3.22 Expand rx_reorder_stats
* (distinguish duplicates within vs. outside block ack window)
* 3.23 Add HTT_T2H_MSG_TYPE_RATE_REPORT to report peer justified rate.
* The justified rate is calculated by two steps. The first is to multiply
* user-rate by (1 - PER) and the other is to smooth the step 1's result
* by a low pass filter.
* This change allows HL download scheduling to consider the WLAN rate
* that will be used for transmitting the downloaded frames.
* 3.24 Expand rx_reorder_stats
* (add counter for decrypt / MIC errors)
* 3.25 Expand rx_reorder_stats
* (add counter of frames received into both local + remote rings)
* 3.26 Add stats struct for counting rx of tx BF, MU, SU, and NDPA frames
* (HTT_DBG_STATS_TXBF_MUSU_NDPA_PKT, rx_txbf_musu_ndpa_pkts_stats)
* 3.27 Add a new interface for flow-control. The following t2h messages have
* been included: HTT_T2H_MSG_TYPE_FLOW_POOL_MAP and
* HTT_T2H_MSG_TYPE_FLOW_POOL_UNMAP
* 3.28 Add a new interface for ring interface change. The following two h2t
* and one t2h messages have been included:
* HTT_H2T_MSG_TYPE_SRING_SETUP, HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG,
* and HTT_T2H_MSG_TYPE_SRING_SETUP_DONE
* 3.29 Add definitions of htt_tx_msdu_desc_ext2_t descriptor and other
* information elements passed from the host to a Lithium target,
* Add definitions of the HTT_H2T ADD_WDS_ENTRY and DELETE_WDS_ENTRY
* messages and the HTT_T2H MAP_FLOW_INFO message (for use with Lithium
* targets).
* 3.30 Add pktlog flag inside HTT_T2H RX_IN_ORD_PADDR_IND message
* 3.31 Add HTT_H2T_MSG_TYPE_RFS_CONFIG
* 3.32 Add HTT_WDI_IPA_OPCODE_SHARING_STATS, HTT_WDI_IPA_OPCODE_SET_QUOTA and
* HTT_WDI_IPA_OPCODE_IND_QUOTA for getting quota and reporting WiFi
* sharing stats
* 3.33 Add HTT_TX_COMPL_IND_STAT_DROP and HTT_TX_COMPL_IND_STAT_HOST_INSPECT
* 3.34 Add HW_PEER_ID field to PEER_MAP
* 3.35 Revise bitfield defs of HTT_SRING_SETUP message
* (changes are not backwards compatible, but HTT_SRING_SETUP message is
* not yet in use)
* 3.36 Add HTT_H2T_MSG_TYPE_EXT_STATS_REQ and HTT_T2H_MSG_TYPE_EXT_STATS_CONF
* 3.37 Add HTT_PEER_TYPE and htt_mac_addr defs
* 3.38 Add holes_no_filled field to rx_reorder_stats
* 3.39 Add host_inspected flag to htt_tx_tcl_vdev_metadata
* 3.40 Add optional timestamps in the HTT tx completion
* 3.41 Add optional tx power spec in the HTT tx completion (for DSRC use)
* 3.42 Add PPDU_STATS_CFG + PPDU_STATS_IND
* 3.43 Add HTT_STATS_RX_PDEV_FW_STATS_PHY_ERR defs
* 3.44 Add htt_tx_wbm_completion_v2
* 3.45 Add host_tx_desc_pool flag in htt_tx_msdu_desc_ext2_t
* 3.46 Add MAC ID and payload size fields to HTT_T2H_MSG_TYPE_PKTLOG header
* 3.47 Add HTT_T2H PEER_MAP_V2 and PEER_UNMAP_V2
* 3.48 Add pdev ID field to HTT_T2H_MSG_TYPE_PPDU_STATS_IND and
* HTT_T2H_MSG_TYPE_PKTLOG
* 3.49 Add HTT_T2H_MSG_TYPE_MONITOR_MAC_HEADER_IND def
* 3.50 Add learning_frame flag to htt_tx_msdu_desc_ext2_t
* 3.51 Add SW peer ID and TID num to HTT TX WBM COMPLETION
* 3.52 Add HTT_T2H FLOW_POOL_RESIZE msg def
* 3.53 Update HTT_T2H FLOW_POOL_RESIZE msg def
* 3.54 Define mcast and mcast_valid flags within htt_tx_wbm_transmit_status
* 3.55 Add initiator / responder flags to RX_DELBA indication
* 3.56 Fix HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE bit-mask defs
* 3.57 Add support for in-band data within HTT_T2H_MSG_TYPE_CFR_DUMP_COMPL_IND
* 3.58 Add optional MSDU ack RSSI array to end of HTT_T2H TX_COMPL_IND msg
* 3.59 Add HTT_RXDMA_HOST_BUF_RING2 def
* 3.60 Add HTT_T2H_MSG_TYPE_PEER_STATS_IND def
* 3.61 Add rx offset fields to HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG msg
* 3.62 Add antenna mask to reserved space in htt_rx_ppdu_desc_t
* 3.63 Add HTT_HTT_T2H_MSG_TYPE_BKPRESSURE_EVENT_IND def
* 3.64 Add struct htt_tx_compl_ind_append_tx_tsf64 and add tx_tsf64
* array to the end of HTT_T2H TX_COMPL_IND msg
* 3.65 Add fields in htt_tx_msdu_desc_ext2_t to allow the host to provide
* a "cookie" to identify a MSDU, and to specify to not apply aggregation
* for a MSDU.
* 3.66 Add HTT_T2H_MSG_TYPE_TX_OFFLOAD_DELIVER_IND msg.
* Add PKT_CAPTURE_MODE flag within HTT_T2H TX_I_ORD_PADDR_IND msg.
* 3.67 Add drop threshold field to HTT_H2T RX_RING_SELECTION_CFG msg.
* 3.68 Add ipa_drop threshold fields to HTT_H2T_MSG_TYPE_SRING_SETUP
* 3.69 Add htt_ul_ofdma_user_info_v0 defs
* 3.70 Add AST1-AST3 fields to HTT_T2H PEER_MAP_V2 msg
* 3.71 Add rx offload engine / flow search engine htt setup message defs for
* HTT_H2T_MSG_TYPE_RX_FSE_SETUP_CFG, HTT_H2T_MSG_TYPE_RX_FSE_OPERATION_CFG
* 3.72 Add tx_retry_cnt fields to htt_tx_offload_deliver_ind_hdr_t and
* htt_tx_data_hdr_information
* 3.73 Add channel pre-calibration data upload and download messages defs for
* HTT_T2H_MSG_TYPE_CHAN_CALDATA and HTT_H2T_MSG_TYPE_CHAN_CALDATA
* 3.74 Add HTT_T2H_MSG_TYPE_RX_FISA_CFG msg.
* 3.75 Add fp_ndp and mo_ndp flags in HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG.
* 3.76 Add HTT_H2T_MSG_TYPE_3_TUPLE_HASH_CFG msg.
* 3.77 Add HTT_H2T_MSG_TYPE_RX_FULL_MONITOR_MODE msg.
* 3.78 Add htt_ppdu_id def.
* 3.79 Add HTT_NUM_AC_WMM def.
* 3.80 Add add WDS_FREE_COUNT bitfield in T2H PEER_UNMAP_V2 msg.
* 3.81 Add ppdu_start_tsf field in HTT_TX_WBM_COMPLETION_V2.
* 3.82 Add WIN_SIZE field to HTT_T2H_MSG_TYPE_RX_DELBA msg.
* 3.83 Shrink seq_idx field in HTT PPDU ID from 3 bits to 2.
* 3.84 Add fisa_control_bits_v2 def.
* 3.85 Add HTT_RX_PEER_META_DATA defs.
* 3.86 Add HTT_T2H_MSG_TYPE_FSE_CMEM_BASE_SEND def.
* 3.87 Add on-chip AST index field to PEER_MAP_V2 msg.
* 3.88 Add HTT_H2T_MSG_TYPE_HOST_PADDR_SIZE def.
* 3.89 Add MSDU queue enumerations.
* 3.90 Add HTT_T2H_MSG_TYPE_MLO_TIMESTAMP_OFFSET_IND def.
* 3.91 Add HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP, _UNMAP defs.
* 3.92 Add HTT_H2T_MSG_TYPE_RXDMA_RXOLE_PPE_CFG def.
* 3.93 Add HTT_T2H_MSG_TYPE_PEER_MAP_V3 def.
* 3.94 Add HTT_H2T_MSG_TYPE_VDEVS_TXRX_STATS_CFG,
* HTT_T2H_MSG_TYPE_VDEVS_TXRX_STATS_PERIODIC_IND defs.
* 3.95 Add HTT_H2T_MSG_TYPE_TX_MONITOR_CFG def.
* 3.96 Modify HTT_H2T_MSG_TYPE_TX_MONITOR_CFG def.
* 3.97 Add tx MSDU drop byte count fields in vdev_txrx_stats_hw_stats TLV.
* 3.98 Add htt_tx_tcl_metadata_v2 def.
* 3.99 Add HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ, _UNMAP_REQ, _MAP_REPORT_REQ and
* HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF defs.
* 3.100 Add htt_tx_wbm_completion_v3 def.
* 3.101 Add HTT_UL_OFDMA_USER_INFO_V1_BITMAP defs.
* 3.102 Add HTT_H2T_MSG_TYPE_MSI_SETUP def.
* 3.103 Add HTT_T2H_SAWF_MSDUQ_INFO_IND defs.
* 3.104 Add mgmt/ctrl/data specs in rx ring cfg.
* 3.105 Add HTT_H2T STREAMING_STATS_REQ + HTT_T2H STREAMING_STATS_IND defs.
* 3.106 Add HTT_T2H_PPDU_ID_FMT_IND def.
* 3.107 Add traffic_end_indication bitfield in htt_tx_msdu_desc_ext2_t.
* 3.108 Add HTT_H2T_MSG_TYPE_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP def.
* 3.109 Add HTT_T2H RX_ADDBA_EXTN,RX_DELBA_EXTN defs.
* 3.110 Add more word_mask fields in htt_tx_monitor_cfg_t.
* 3.111 Add RXPCU filter enable flag in RX_RING_SELECTION_CFG msg.
* 3.112 Add logical_link_id field in rx_peer_metadata_v1.
* 3.113 Add add rx msdu,mpdu,ppdu fields in rx_ring_selection_cfg_t
* 3.114 Add HTT_H2T_MSG_TYPE_UMAC_HANG_RECOVERY_SOC_START_PRE_RESET def.
* 3.115 Add HTT_H2T_MSG_TYPE_RX_CCE_SUPER_RULE_SETUP and
* HTT_T2H_MSG_TYPE_RX_CCE_SUPER_RULE_SETUP_DONE msg defs.
* 3.116 Add HTT_TX_MONITOR_CFG_WORD_MASK_COMPACTION_ENABLE flag.
* 3.117 Add HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_IND def.
* 3.118 Add HTT_T2H_MSG_TYPE_RX_DATA_IND and _SOFT_UMAC_TX_COMPL_IND defs.
* 3.119 Add RX_PEER_META_DATA V1A and V1B defs.
* 3.120 Add HTT_H2T_MSG_TYPE_PRIMARY_LINK_PEER_MIGRATE_IND, _RESP defs.
* 3.121 Add HTT_T2H_MSG_TYPE_PEER_AST_OVERRIDE_INDEX_IND def.
* 3.122 Add is_umac_hang flag in H2T UMAC_HANG_RECOVERY_SOC_START_PRE_RESET msg
* 3.123 Add HTT_OPTION_TLV_TCL_METADATA_V21 def.
* 3.124 Add HTT_T2H_MSG_TYPE_PEER_EXTENDED_EVENT def.
* 3.125 Expand fisa_aggr_limit bits in fisa_control_bits_v2.
* 3.126 Add HTT_RXDATA_ERR_INVALID_PEER def.
* 3.127 Add transmit_count fields in htt_tx_wbm_completion_vX structs.
* 3.128 Add H2T TX_LATENCY_STATS_CFG + T2H TX_LATENCY_STATS_PERIODIC_IND
* msg defs.
* 3.129 Add HTT_TX_FW2WBM_REINJECT_REASON_SAWF_SVC_CLASS_ID_ABSENT def.
* 3.130 Add H2T TX_LCE_SUPER_RULE_SETUP and T2H TX_LCE_SUPER_RULE_SETUP_DONE
* msg defs.
* 3.131 Add H2T TYPE_MSDUQ_RECFG_REQ + T2H MSDUQ_CFG_IND msg defs.
* 3.132 Add flow_classification_3_tuple_field_enable in H2T 3_TUPLE_HASH_CFG.
* 3.133 Add packet_type_enable_data_flags fields in rx_ring_selection_cfg.
* 3.134 Add qdata_refill flag in rx_peer_metadata_v1a.
* 3.135 Add HTT_HOST4_TO_FW_RXBUF_RING def.
* 3.136 Add htt_ext_present flag in htt_tx_tcl_global_seq_metadata.
*/
#define HTT_CURRENT_VERSION_MAJOR 3
#define HTT_CURRENT_VERSION_MINOR 136
#define HTT_NUM_TX_FRAG_DESC 1024
#define HTT_WIFI_IP_VERSION(x,y) ((x) == (y))
#define HTT_CHECK_SET_VAL(field, val) \
A_ASSERT(!((val) & ~((field ## _M) >> (field ## _S))))
/* macros to assist in sign-extending fields from HTT messages */
#define HTT_SIGN_BIT_MASK(field) \
((field ## _M + (1 << field ## _S)) >> 1)
#define HTT_SIGN_BIT(_val, field) \
(_val & HTT_SIGN_BIT_MASK(field))
#define HTT_SIGN_BIT_UNSHIFTED(_val, field) \
(HTT_SIGN_BIT(_val, field) >> field ## _S)
#define HTT_SIGN_BIT_UNSHIFTED_MINUS_ONE(_val, field) \
(HTT_SIGN_BIT_UNSHIFTED(_val, field) - 1)
#define HTT_SIGN_BIT_EXTENSION(_val, field) \
(~(HTT_SIGN_BIT_UNSHIFTED(_val, field) | \
HTT_SIGN_BIT_UNSHIFTED_MINUS_ONE(_val, field)))
#define HTT_SIGN_BIT_EXTENSION_MASK(_val, field) \
(HTT_SIGN_BIT_EXTENSION(_val, field) & ~(field ## _M >> field ## _S))
/*
* TEMPORARY:
* Provide HTT_H2T_MSG_TYPE_MGMT_TX as an alias for
* DEPRECATED_HTT_H2T_MSG_TYPE_MGMT_TX until all code
* that refers to HTT_H2T_MSG_TYPE_MGMT_TX has been
* updated.
*/
#define HTT_H2T_MSG_TYPE_MGMT_TX DEPRECATED_HTT_H2T_MSG_TYPE_MGMT_TX
/*
* TEMPORARY:
* Provide HTT_T2H_MSG_TYPE_RC_UPDATE_IND as an alias for
* DEPRECATED_HTT_T2H_MSG_TYPE_RC_UPDATE_IND until all code
* that refers to HTT_T2H_MSG_TYPE_RC_UPDATE_IND has been
* updated.
*/
#define HTT_T2H_MSG_TYPE_RC_UPDATE_IND DEPRECATED_HTT_T2H_MSG_TYPE_RC_UPDATE_IND
/**
* htt_dbg_stats_type -
* bit positions for each stats type within a stats type bitmask
* The bitmask contains 24 bits.
*/
enum htt_dbg_stats_type {
HTT_DBG_STATS_WAL_PDEV_TXRX = 0, /* bit 0 -> 0x1 */
HTT_DBG_STATS_RX_REORDER = 1, /* bit 1 -> 0x2 */
HTT_DBG_STATS_RX_RATE_INFO = 2, /* bit 2 -> 0x4 */
HTT_DBG_STATS_TX_PPDU_LOG = 3, /* bit 3 -> 0x8 */
HTT_DBG_STATS_TX_RATE_INFO = 4, /* bit 4 -> 0x10 */
HTT_DBG_STATS_TIDQ = 5, /* bit 5 -> 0x20 */
HTT_DBG_STATS_TXBF_INFO = 6, /* bit 6 -> 0x40 */
HTT_DBG_STATS_SND_INFO = 7, /* bit 7 -> 0x80 */
HTT_DBG_STATS_ERROR_INFO = 8, /* bit 8 -> 0x100 */
HTT_DBG_STATS_TX_SELFGEN_INFO = 9, /* bit 9 -> 0x200 */
HTT_DBG_STATS_TX_MU_INFO = 10, /* bit 10 -> 0x400 */
HTT_DBG_STATS_SIFS_RESP_INFO = 11, /* bit 11 -> 0x800 */
HTT_DBG_STATS_RX_REMOTE_RING_BUFFER_INFO = 12, /* bit 12 -> 0x1000 */
HTT_DBG_STATS_RX_RATE_INFO_V2 = 13, /* bit 13 -> 0x2000 */
HTT_DBG_STATS_TX_RATE_INFO_V2 = 14, /* bit 14 -> 0x4000 */
HTT_DBG_STATS_TXBF_MUSU_NDPA_PKT = 15, /* bit 15 -> 0x8000 */
/* bits 16-23 currently reserved */
/* keep this last */
HTT_DBG_NUM_STATS
};
/*=== HTT option selection TLVs ===
* Certain HTT messages have alternatives or options.
* For such cases, the host and target need to agree on which option to use.
* Option specification TLVs can be appended to the VERSION_REQ and
* VERSION_CONF messages to select options other than the default.
* These TLVs are entirely optional - if they are not provided, there is a
* well-defined default for each option. If they are provided, they can be
* provided in any order. Each TLV can be present or absent independent of
* the presence / absence of other TLVs.
*
* The HTT option selection TLVs use the following format:
* |31 16|15 8|7 0|
* |---------------------------------+----------------+----------------|
* | value (payload) | length | tag |
* |-------------------------------------------------------------------|
* The value portion need not be only 2 bytes; it can be extended by any
* integer number of 4-byte units. The total length of the TLV, including
* the tag and length fields, must be a multiple of 4 bytes. The length
* field specifies the total TLV size in 4-byte units. Thus, the typical
* TLV, with a 1-byte tag field, a 1-byte length field, and a 2-byte value
* field, would store 0x1 in its length field, to show that the TLV occupies
* a single 4-byte unit.
*/
/*--- TLV header format - applies to all HTT option TLVs ---*/
enum HTT_OPTION_TLV_TAGS {
HTT_OPTION_TLV_TAG_RESERVED0 = 0x0,
HTT_OPTION_TLV_TAG_LL_BUS_ADDR_SIZE = 0x1,
HTT_OPTION_TLV_TAG_HL_SUPPRESS_TX_COMPL_IND = 0x2,
HTT_OPTION_TLV_TAG_MAX_TX_QUEUE_GROUPS = 0x3,
HTT_OPTION_TLV_TAG_SUPPORT_TX_MSDU_DESC_EXT = 0x4,
/* TCL_METADATA_VER: added to support V2 and higher of the TCL Data Cmd */
HTT_OPTION_TLV_TAG_TCL_METADATA_VER = 0x5,
};
#define HTT_TCL_METADATA_VER_SZ 4
PREPACK struct htt_option_tlv_header_t {
A_UINT8 tag;
A_UINT8 length;
} POSTPACK;
#define HTT_OPTION_TLV_TAG_M 0x000000ff
#define HTT_OPTION_TLV_TAG_S 0
#define HTT_OPTION_TLV_LENGTH_M 0x0000ff00
#define HTT_OPTION_TLV_LENGTH_S 8
/*
* value0 - 16 bit value field stored in word0
* The TLV's value field may be longer than 2 bytes, in which case
* the remainder of the value is stored in word1, word2, etc.
*/
#define HTT_OPTION_TLV_VALUE0_M 0xffff0000
#define HTT_OPTION_TLV_VALUE0_S 16
#define HTT_OPTION_TLV_TAG_SET(word, tag) \
do { \
HTT_CHECK_SET_VAL(HTT_OPTION_TLV_TAG, tag); \
(word) |= ((tag) << HTT_OPTION_TLV_TAG_S); \
} while (0)
#define HTT_OPTION_TLV_TAG_GET(word) \
(((word) & HTT_OPTION_TLV_TAG_M) >> HTT_OPTION_TLV_TAG_S)
#define HTT_OPTION_TLV_LENGTH_SET(word, tag) \
do { \
HTT_CHECK_SET_VAL(HTT_OPTION_TLV_LENGTH, tag); \
(word) |= ((tag) << HTT_OPTION_TLV_LENGTH_S); \
} while (0)
#define HTT_OPTION_TLV_LENGTH_GET(word) \
(((word) & HTT_OPTION_TLV_LENGTH_M) >> HTT_OPTION_TLV_LENGTH_S)
#define HTT_OPTION_TLV_VALUE0_SET(word, tag) \
do { \
HTT_CHECK_SET_VAL(HTT_OPTION_TLV_VALUE0, tag); \
(word) |= ((tag) << HTT_OPTION_TLV_VALUE0_S); \
} while (0)
#define HTT_OPTION_TLV_VALUE0_GET(word) \
(((word) & HTT_OPTION_TLV_VALUE0_M) >> HTT_OPTION_TLV_VALUE0_S)
/*--- format of specific HTT option TLVs ---*/
/*
* HTT option TLV for specifying LL bus address size
* Some chips require bus addresses used by the target to access buffers
* within the host's memory to be 32 bits; others require bus addresses
* used by the target to access buffers within the host's memory to be
* 64 bits.
* The LL_BUS_ADDR_SIZE TLV can be sent from the target to the host as
* a suffix to the VERSION_CONF message to specify which bus address format
* the target requires.
* If this LL_BUS_ADDR_SIZE TLV is not sent by the target, the host should
* default to providing bus addresses to the target in 32-bit format.
*/
enum HTT_OPTION_TLV_LL_BUS_ADDR_SIZE_VALUES {
HTT_OPTION_TLV_LL_BUS_ADDR_SIZE32 = 0x0,
HTT_OPTION_TLV_LL_BUS_ADDR_SIZE64 = 0x1,
};
PREPACK struct htt_option_tlv_ll_bus_addr_size_t {
struct htt_option_tlv_header_t hdr;
A_UINT16 ll_bus_addr_size; /* LL_BUS_ADDR_SIZE_VALUES enum */
} POSTPACK;
/*
* HTT option TLV for specifying whether HL systems should indicate
* over-the-air tx completion for individual frames, or should instead
* send a bulk TX_CREDIT_UPDATE_IND except when the host explicitly
* requests an OTA tx completion for a particular tx frame.
* This option does not apply to LL systems, where the TX_COMPL_IND
* is mandatory.
* This option is primarily intended for HL systems in which the tx frame
* downloads over the host --> target bus are as slow as or slower than
* the transmissions over the WLAN PHY. For cases where the bus is faster
* than the WLAN PHY, the target will transmit relatively large A-MPDUs,
* and consequently will send one TX_COMPL_IND message that covers several
* tx frames. For cases where the WLAN PHY is faster than the bus,
* the target will end up transmitting very short A-MPDUs, and consequently
* sending many TX_COMPL_IND messages, which each cover a very small number
* of tx frames.
* The HL_SUPPRESS_TX_COMPL_IND TLV can be sent by the host to the target as
* a suffix to the VERSION_REQ message to request whether the host desires to
* use TX_CREDIT_UPDATE_IND rather than TX_COMPL_IND. The target can then
* send a HTT_SUPPRESS_TX_COMPL_IND TLV to the host as a suffix to the
* VERSION_CONF message to confirm whether TX_CREDIT_UPDATE_IND will be used
* rather than TX_COMPL_IND. TX_CREDIT_UPDATE_IND shall only be used if the
* host sends a HL_SUPPRESS_TX_COMPL_IND TLV requesting use of
* TX_CREDIT_UPDATE_IND, and the target sends a HL_SUPPRESS_TX_COMPLE_IND TLV
* back to the host confirming use of TX_CREDIT_UPDATE_IND.
* Lack of a HL_SUPPRESS_TX_COMPL_IND TLV from either host --> target or
* target --> host is equivalent to a HL_SUPPRESS_TX_COMPL_IND that
* explicitly specifies HL_ALLOW_TX_COMPL_IND in the value payload of the
* TLV.
*/
enum HTT_OPTION_TLV_HL_SUPPRESS_TX_COMPL_IND_VALUES {
HTT_OPTION_TLV_HL_ALLOW_TX_COMPL_IND = 0x0,
HTT_OPTION_TLV_HL_SUPPRESS_TX_COMPL_IND = 0x1,
};
PREPACK struct htt_option_tlv_hl_suppress_tx_compl_ind_t {
struct htt_option_tlv_header_t hdr;
A_UINT16 hl_suppress_tx_compl_ind; /* HL_SUPPRESS_TX_COMPL_IND enum */
} POSTPACK;
/*
* HTT option TLV for specifying how many tx queue groups the target
* may establish.
* This TLV specifies the maximum value the target may send in the
* txq_group_id field of any TXQ_GROUP information elements sent by
* the target to the host. This allows the host to pre-allocate an
* appropriate number of tx queue group structs.
*
* The MAX_TX_QUEUE_GROUPS_TLV can be sent from the host to the target as
* a suffix to the VERSION_REQ message to specify whether the host supports
* tx queue groups at all, and if so if there is any limit on the number of
* tx queue groups that the host supports.
* The MAX_TX_QUEUE_GROUPS TLV can be sent from the target to the host as
* a suffix to the VERSION_CONF message. If the host has specified in the
* VER_REQ message a limit on the number of tx queue groups the host can
* support, the target shall limit its specification of the maximum tx groups
* to be no larger than this host-specified limit.
*
* If the target does not provide a MAX_TX_QUEUE_GROUPS TLV, then the host
* shall preallocate 4 tx queue group structs, and the target shall not
* specify a txq_group_id larger than 3.
*/
enum HTT_OPTION_TLV_MAX_TX_QUEUE_GROUPS_VALUES {
HTT_OPTION_TLV_TX_QUEUE_GROUPS_UNSUPPORTED = 0,
/*
* values 1 through N specify the max number of tx queue groups
* the sender supports
*/
HTT_OPTION_TLV_TX_QUEUE_GROUPS_UNLIMITED = 0xffff,
};
/* TEMPORARY backwards-compatibility alias for a typo fix -
* The htt_option_tlv_mac_tx_queue_groups_t typo has been corrected
* to htt_option_tlv_max_tx_queue_groups_t, but an alias is provided
* to support the old name (with the typo) until all references to the
* old name are replaced with the new name.
*/
#define htt_option_tlv_mac_tx_queue_groups_t htt_option_tlv_max_tx_queue_groups_t
PREPACK struct htt_option_tlv_max_tx_queue_groups_t {
struct htt_option_tlv_header_t hdr;
A_UINT16 max_tx_queue_groups; /* max txq_group_id + 1 */
} POSTPACK;
/*
* HTT option TLV for specifying whether the target supports an extended
* version of the HTT tx descriptor. If the target provides this TLV
* and specifies in the TLV that the target supports an extended version
* of the HTT tx descriptor, the target must check the "extension" bit in
* the HTT tx descriptor, and if the extension bit is set, to expect a
* HTT tx MSDU extension descriptor immediately following the HTT tx MSDU
* descriptor. Furthermore, the target must provide room for the HTT
* tx MSDU extension descriptor in the target's TX_FRM buffer.
* This option is intended for systems where the host needs to explicitly
* control the transmission parameters such as tx power for individual
* tx frames.
* The SUPPORT_TX_MSDU_DESC_EXT TLB can be sent by the target to the host
* as a suffix to the VERSION_CONF message to explicitly specify whether
* the target supports the HTT tx MSDU extension descriptor.
* Lack of a SUPPORT_TX_MSDU_DESC_EXT from the target shall be interpreted
* by the host as lack of target support for the HTT tx MSDU extension
* descriptor; the host shall provide HTT tx MSDU extension descriptors in
* the HTT_H2T TX_FRM messages only if the target indicates it supports
* the HTT tx MSDU extension descriptor.
* The host is not required to provide the HTT tx MSDU extension descriptor
* just because the target supports it; the target must check the
* "extension" bit in the HTT tx MSDU descriptor to determine whether an
* extension descriptor is present.
*/
enum HTT_OPTION_TLV_SUPPORT_TX_MSDU_DESC_EXT_VALUES {
HTT_OPTION_TLV_TX_MSDU_DESC_EXT_NO_SUPPORT = 0x0,
HTT_OPTION_TLV_TX_MSDU_DESC_EXT_SUPPORT = 0x1,
};
PREPACK struct htt_option_tlv_support_tx_msdu_desc_ext_t {
struct htt_option_tlv_header_t hdr;
A_UINT16 tx_msdu_desc_ext_support; /* SUPPORT_TX_MSDU_DESC_EXT enum */
} POSTPACK;
/*
* For the tcl data command V2 and higher support added a new
* version tag HTT_OPTION_TLV_TAG_TCL_METADATA_VER.
* This will be used as a TLV in HTT_H2T_MSG_TYPE_VERSION_REQ and
* HTT_T2H_MSG_TYPE_VERSION_CONF.
* HTT option TLV for specifying which version of the TCL metadata struct
* should be used:
* V1 -> use htt_tx_tcl_metadata struct
* V2 -> use htt_tx_tcl_metadata_v2 struct
* Old FW will only support V1.
* New FW will support V2. New FW will still support V1, at least during
* a transition period.
* Similarly, old host will only support V1, and new host will support V1 + V2.
*
* The host can provide a HTT_OPTION_TLV_TAG_TCL_METADATA_VER in the
* HTT_H2T_MSG_TYPE_VERSION_REQ to indicate to the target which version(s)
* of TCL metadata the host supports. If the host doesn't provide a
* HTT_OPTION_TLV_TAG_TCL_METADATA_VER in the VERSION_REQ message, it
* is implicitly understood that the host only supports V1.
* The target can provide a HTT_OPTION_TLV_TAG_TCL_METADATA_VER in the
* HTT_T2H_MSG_TYPE_VERSION_CONF to indicate which version of TCL metadata
* the host shall use. The target shall only select one of the versions
* supported by the host. If the target doesn't provide a
* HTT_OPTION_TLV_TAG_TCL_METADATA_VER in the VERSION_CONF message, it
* is implicitly understood that the V1 TCL metadata shall be used.
*
* Feb 2023: Added version HTT_OPTION_TLV_TCL_METADATA_V21 = 21
* read as version 2.1. We added support for Dynamic AST Index Allocation
* for Alder+Pine in version 2.1. For HTT_OPTION_TLV_TCL_METADATA_V2 = 2
* we will retain older behavior of making sure the AST Index for SAWF
* in Pine is allocated using wifitool ath2 setUnitTestCmd 0x48 2 536 1
* and the FW will crash in wal_tx_de_fast.c. For version 2.1 and
* above we will use htt_tx_tcl_svc_class_id_metadata.ast_index
* in TCLV2 command and do the dynamic AST allocations.
*/
enum HTT_OPTION_TLV_TCL_METADATA_VER_VALUES {
HTT_OPTION_TLV_TCL_METADATA_V1 = 1,
HTT_OPTION_TLV_TCL_METADATA_V2 = 2,
/* values 3-20 reserved */
HTT_OPTION_TLV_TCL_METADATA_V21 = 21,
};
PREPACK struct htt_option_tlv_tcl_metadata_ver_t {
struct htt_option_tlv_header_t hdr;
A_UINT16 tcl_metadata_ver; /* TCL_METADATA_VER_VALUES enum */
} POSTPACK;
#define HTT_OPTION_TLV_TCL_METADATA_VER_SET(word, value) \
HTT_OPTION_TLV_VALUE0_SET(word, value)
#define HTT_OPTION_TLV_TCL_METADATA_VER_GET(word) \
HTT_OPTION_TLV_VALUE0_GET(word)
typedef struct {
union {
/* BIT [11 : 0] :- tag
* BIT [23 : 12] :- length
* BIT [31 : 24] :- reserved
*/
A_UINT32 tag__length;
/*
* The following struct is not endian-portable.
* It is suitable for use within the target, which is known to be
* little-endian.
* The host should use the above endian-portable macros to access
* the tag and length bitfields in an endian-neutral manner.
*/
struct {
A_UINT32 tag : 12, /* BIT [11 : 0] */
length : 12, /* BIT [23 : 12] */
reserved : 8; /* BIT [31 : 24] */
};
};
} htt_tlv_hdr_t;
/** HTT stats TLV tag values */
typedef enum {
HTT_STATS_TX_PDEV_CMN_TAG = 0, /* htt_tx_pdev_stats_cmn_tlv */
HTT_STATS_TX_PDEV_UNDERRUN_TAG = 1, /* htt_tx_pdev_stats_urrn_tlv_v */
HTT_STATS_TX_PDEV_SIFS_TAG = 2, /* htt_tx_pdev_stats_sifs_tlv_v */
HTT_STATS_TX_PDEV_FLUSH_TAG = 3, /* htt_tx_pdev_stats_flush_tlv_v */
HTT_STATS_TX_PDEV_PHY_ERR_TAG = 4, /* htt_tx_pdev_stats_phy_err_tlv_v */
HTT_STATS_STRING_TAG = 5, /* htt_stats_string_tlv, PUBLISH_FUNC=get_sring_name_data */
HTT_STATS_TX_HWQ_CMN_TAG = 6, /* htt_tx_hwq_stats_cmn_tlv, PUBLISH_CODE=#inbound_req->tx_hwq_id_mac_id_word = ((htt_tx_hwq_stats_cmn_tlv *)tag_buf)->mac_id__hwq_id__word;#, PUBLISH_FUNC=create_json_response_for_htt_stats_tx_hwq */
HTT_STATS_TX_HWQ_DIFS_LATENCY_TAG = 7, /* htt_tx_hwq_difs_latency_stats_tlv_v */
HTT_STATS_TX_HWQ_CMD_RESULT_TAG = 8, /* htt_tx_hwq_cmd_result_stats_tlv_v, PUBLISH_FUNC=create_json_response_for_htt_stats_tx_hwq */
HTT_STATS_TX_HWQ_CMD_STALL_TAG = 9, /* htt_tx_hwq_cmd_stall_stats_tlv_v, PUBLISH_FUNC=create_json_response_for_htt_stats_tx_hwq */
HTT_STATS_TX_HWQ_FES_STATUS_TAG = 10, /* htt_tx_hwq_fes_result_stats_tlv_v, PUBLISH_FUNC=create_json_response_for_htt_stats_tx_hwq */
HTT_STATS_TX_TQM_GEN_MPDU_TAG = 11, /* htt_tx_tqm_gen_mpdu_stats_tlv_v */
HTT_STATS_TX_TQM_LIST_MPDU_TAG = 12, /* htt_tx_tqm_list_mpdu_stats_tlv_v */
HTT_STATS_TX_TQM_LIST_MPDU_CNT_TAG = 13, /* htt_tx_tqm_list_mpdu_cnt_tlv_v */
HTT_STATS_TX_TQM_CMN_TAG = 14, /* htt_tx_tqm_cmn_stats_tlv */
HTT_STATS_TX_TQM_PDEV_TAG = 15, /* htt_tx_tqm_pdev_stats_tlv_v */
HTT_STATS_TX_TQM_CMDQ_STATUS_TAG = 16, /* htt_tx_tqm_cmdq_status_tlv */
HTT_STATS_TX_DE_EAPOL_PACKETS_TAG = 17, /* htt_tx_de_eapol_packets_stats_tlv */
HTT_STATS_TX_DE_CLASSIFY_FAILED_TAG = 18, /* htt_tx_de_classify_failed_stats_tlv */
HTT_STATS_TX_DE_CLASSIFY_STATS_TAG = 19, /* htt_tx_de_classify_stats_tlv */
HTT_STATS_TX_DE_CLASSIFY_STATUS_TAG = 20, /* htt_tx_de_classify_status_stats_tlv */
HTT_STATS_TX_DE_ENQUEUE_PACKETS_TAG = 21, /* htt_tx_de_enqueue_packets_stats_tlv */
HTT_STATS_TX_DE_ENQUEUE_DISCARD_TAG = 22, /* htt_tx_de_enqueue_discard_stats_tlv */
HTT_STATS_TX_DE_CMN_TAG = 23, /* htt_tx_de_cmn_stats_tlv */
HTT_STATS_RING_IF_TAG = 24, /* htt_ring_if_stats_tlv */
HTT_STATS_TX_PDEV_MU_MIMO_STATS_TAG = 25, /* htt_tx_pdev_mu_mimo_sch_stats_tlv */
HTT_STATS_SFM_CMN_TAG = 26, /* htt_sfm_cmn_tlv */
HTT_STATS_SRING_STATS_TAG = 27, /* htt_sring_stats_tlv, PUBLISH_FUNC=create_json_response_for_sring_stats */
HTT_STATS_RX_PDEV_FW_STATS_TAG = 28, /* htt_rx_pdev_fw_stats_tlv */
HTT_STATS_RX_PDEV_FW_RING_MPDU_ERR_TAG = 29, /* htt_rx_pdev_fw_ring_mpdu_err_tlv_v */
HTT_STATS_RX_PDEV_FW_MPDU_DROP_TAG = 30, /* htt_rx_pdev_fw_mpdu_drop_tlv_v */
HTT_STATS_RX_SOC_FW_STATS_TAG = 31, /* htt_rx_soc_fw_stats_tlv */
HTT_STATS_RX_SOC_FW_REFILL_RING_EMPTY_TAG = 32, /* htt_rx_soc_fw_refill_ring_empty_tlv_v */
HTT_STATS_RX_SOC_FW_REFILL_RING_NUM_REFILL_TAG = 33, /* htt_rx_soc_fw_refill_ring_num_refill_tlv_v */
HTT_STATS_TX_PDEV_RATE_STATS_TAG = 34, /* htt_tx_pdev_rate_stats_tlv */
HTT_STATS_RX_PDEV_RATE_STATS_TAG = 35, /* htt_rx_pdev_rate_stats_tlv */
HTT_STATS_TX_PDEV_SCHEDULER_TXQ_STATS_TAG = 36, /* htt_tx_pdev_stats_sched_per_txq_tlv, PUBLISH_CODE=#inbound_req->tx_sched_txq_id_mac_id_word = ((htt_tx_pdev_stats_sched_per_txq_tlv *)tag_buf)->mac_id__txq_id__word;#, PUBLISH_FUNC=create_json_response_for_htt_stats_sched_txq */
HTT_STATS_TX_SCHED_CMN_TAG = 37, /* htt_stats_tx_sched_cmn_tlv, PUBLISH_SKIP */
HTT_STATS_TX_PDEV_MUMIMO_MPDU_STATS_TAG = 38, /* htt_tx_pdev_mu_mimo_mpdu_stats_tlv */
HTT_STATS_SCHED_TXQ_CMD_POSTED_TAG = 39, /* htt_sched_txq_cmd_posted_tlv_v, PUBLISH_FUNC=create_json_response_for_htt_stats_sched_txq */
HTT_STATS_RING_IF_CMN_TAG = 40, /* htt_ring_if_cmn_tlv */
HTT_STATS_SFM_CLIENT_USER_TAG = 41, /* htt_sfm_client_user_tlv_v, PUBLISH_FUNC=create_json_response_for_sfm_client */
HTT_STATS_SFM_CLIENT_TAG = 42, /* htt_sfm_client_tlv, PUBLISH_FUNC=create_json_response_for_sfm_client */
HTT_STATS_TX_TQM_ERROR_STATS_TAG = 43, /* htt_tx_tqm_error_stats_tlv */
HTT_STATS_SCHED_TXQ_CMD_REAPED_TAG = 44, /* htt_sched_txq_cmd_reaped_tlv_v, PUBLISH_FUNC=create_json_response_for_htt_stats_sched_txq */
HTT_STATS_SRING_CMN_TAG = 45, /* htt_sring_cmn_tlv */
HTT_STATS_TX_SELFGEN_AC_ERR_STATS_TAG = 46, /* htt_tx_selfgen_ac_err_stats_tlv */
HTT_STATS_TX_SELFGEN_CMN_STATS_TAG = 47, /* htt_tx_selfgen_cmn_stats_tlv */
HTT_STATS_TX_SELFGEN_AC_STATS_TAG = 48, /* htt_tx_selfgen_ac_stats_tlv */
HTT_STATS_TX_SELFGEN_AX_STATS_TAG = 49, /* htt_tx_selfgen_ax_stats_tlv */
HTT_STATS_TX_SELFGEN_AX_ERR_STATS_TAG = 50, /* htt_tx_selfgen_ax_err_stats_tlv */
HTT_STATS_TX_HWQ_MUMIMO_SCH_STATS_TAG = 51, /* htt_tx_hwq_mu_mimo_sch_stats_tlv */
HTT_STATS_TX_HWQ_MUMIMO_MPDU_STATS_TAG = 52, /* htt_tx_hwq_mu_mimo_mpdu_stats_tlv */
HTT_STATS_TX_HWQ_MUMIMO_CMN_STATS_TAG = 53, /* htt_tx_hwq_mu_mimo_cmn_stats_tlv */
HTT_STATS_HW_INTR_MISC_TAG = 54, /* htt_hw_stats_intr_misc_tlv, PUBLISH_FUNC=create_json_response_for_hwstats_intr_misc */
HTT_STATS_HW_WD_TIMEOUT_TAG = 55, /* htt_hw_stats_wd_timeout_tlv */
HTT_STATS_HW_PDEV_ERRS_TAG = 56, /* htt_hw_stats_pdev_errs_tlv */
HTT_STATS_COUNTER_NAME_TAG = 57, /* htt_counter_tlv */
HTT_STATS_TX_TID_DETAILS_TAG = 58, /* htt_tx_tid_stats_tlv */
HTT_STATS_RX_TID_DETAILS_TAG = 59, /* htt_rx_tid_stats_tlv */
HTT_STATS_PEER_STATS_CMN_TAG = 60, /* htt_peer_stats_cmn_tlv */
HTT_STATS_PEER_DETAILS_TAG = 61, /* htt_peer_details_tlv */
HTT_STATS_PEER_TX_RATE_STATS_TAG = 62, /* htt_tx_peer_rate_stats_tlv */
HTT_STATS_PEER_RX_RATE_STATS_TAG = 63, /* htt_rx_peer_rate_stats_tlv, TOPIC=advanced */
HTT_STATS_PEER_MSDU_FLOWQ_TAG = 64, /* htt_msdu_flow_stats_tlv */
HTT_STATS_TX_DE_COMPL_STATS_TAG = 65, /* htt_tx_de_compl_stats_tlv */
HTT_STATS_WHAL_TX_TAG = 66, /* htt_hw_stats_whal_tx_tlv */
HTT_STATS_TX_PDEV_SIFS_HIST_TAG = 67, /* htt_tx_pdev_stats_sifs_hist_tlv_v */
HTT_STATS_RX_PDEV_FW_STATS_PHY_ERR_TAG = 68, /* htt_rx_pdev_fw_stats_phy_err_tlv */
HTT_STATS_TX_TID_DETAILS_V1_TAG = 69, /* htt_tx_tid_stats_v1_tlv */
HTT_STATS_PDEV_CCA_1SEC_HIST_TAG = 70, /* htt_pdev_cca_stats_hist_tlv (for 1 sec interval stats), PUBLISH_FUNC=update_htt_pdev_cca_stat_context */
HTT_STATS_PDEV_CCA_100MSEC_HIST_TAG = 71, /* htt_pdev_cca_stats_hist_tlv (for 100 msec interval stats), PUBLISH_FUNC=update_htt_pdev_cca_stat_context */
HTT_STATS_PDEV_CCA_STAT_CUMULATIVE_TAG = 72, /* htt_pdev_stats_cca_stats_tlv, PUBLISH_FUNC=update_htt_pdev_cca_stat_context */
HTT_STATS_PDEV_CCA_COUNTERS_TAG = 73, /* htt_pdev_stats_cca_counters_tlv, PUBLISH_FUNC=create_json_response_for_htt_pdev_cca_stat */
HTT_STATS_TX_PDEV_MPDU_STATS_TAG = 74, /* htt_tx_pdev_mpdu_stats_tlv, PUBLISH_FUNC=create_json_response_for_htt_tx_pdev_mpdu_stat */
HTT_STATS_PDEV_TWT_SESSIONS_TAG = 75, /* htt_pdev_stats_twt_sessions_tlv */
HTT_STATS_PDEV_TWT_SESSION_TAG = 76, /* htt_pdev_stats_twt_session_tlv */
HTT_STATS_RX_REFILL_RXDMA_ERR_TAG = 77, /* htt_rx_soc_fw_refill_ring_num_rxdma_err_tlv_v */
HTT_STATS_RX_REFILL_REO_ERR_TAG = 78, /* htt_rx_soc_fw_refill_ring_num_reo_err_tlv_v */
HTT_STATS_RX_REO_RESOURCE_STATS_TAG = 79, /* htt_rx_reo_debug_stats_tlv_v */
HTT_STATS_TX_SOUNDING_STATS_TAG = 80, /* htt_tx_sounding_stats_tlv */
HTT_STATS_TX_PDEV_TX_PPDU_STATS_TAG = 81, /* htt_tx_pdev_stats_tx_ppdu_stats_tlv_v */
HTT_STATS_TX_PDEV_TRIED_MPDU_CNT_HIST_TAG = 82, /* htt_tx_pdev_stats_tried_mpdu_cnt_hist_tlv_v */
HTT_STATS_TX_HWQ_TRIED_MPDU_CNT_HIST_TAG = 83, /* htt_tx_hwq_tried_mpdu_cnt_hist_tlv_v */
HTT_STATS_TX_HWQ_TXOP_USED_CNT_HIST_TAG = 84, /* htt_tx_hwq_txop_used_cnt_hist_tlv_v */
HTT_STATS_TX_DE_FW2WBM_RING_FULL_HIST_TAG = 85, /* htt_tx_de_fw2wbm_ring_full_hist_tlv */
HTT_STATS_SCHED_TXQ_SCHED_ORDER_SU_TAG = 86, /* htt_sched_txq_sched_order_su_tlv, PUBLISH_FUNC=create_json_response_for_htt_stats_sched_txq */
HTT_STATS_SCHED_TXQ_SCHED_INELIGIBILITY_TAG = 87, /* htt_sched_txq_sched_eligibility_tlv, PUBLISH_FUNC=create_json_response_for_htt_stats_sched_txq */
HTT_STATS_PDEV_OBSS_PD_TAG = 88, /* htt_pdev_obss_pd_stats_tlv */
HTT_STATS_HW_WAR_TAG = 89, /* htt_hw_war_stats_tlv */
HTT_STATS_RING_BACKPRESSURE_STATS_TAG = 90, /* htt_ring_backpressure_stats_tlv, PUBLISH_FUNC=create_json_response_for_ring_bkp_pressure_stats */
HTT_STATS_LATENCY_PROF_STATS_TAG = 91, /* htt_latency_prof_stats_tlv, PUBLISH_FUNC=create_json_response_for_latency_prof_stats */
HTT_STATS_LATENCY_CTX_TAG = 92, /* htt_latency_prof_ctx_tlv */
HTT_STATS_LATENCY_CNT_TAG = 93, /* htt_latency_prof_cnt_tlv */
HTT_STATS_RX_PDEV_UL_TRIG_STATS_TAG = 94, /* htt_rx_pdev_ul_trigger_stats_tlv */
HTT_STATS_RX_PDEV_UL_OFDMA_USER_STATS_TAG = 95, /* htt_rx_pdev_ul_ofdma_user_stats_tlv, PUBLISH_FUNC=create_json_response_for_htt_rx_pdev_ul_ofdma_user_stat */
HTT_STATS_RX_PDEV_UL_MIMO_USER_STATS_TAG = 96, /* htt_rx_pdev_ul_mimo_user_stats_tlv */
HTT_STATS_RX_PDEV_UL_MUMIMO_TRIG_STATS_TAG = 97, /* htt_rx_pdev_ul_mumimo_trig_stats_tlv */
HTT_STATS_RX_FSE_STATS_TAG = 98, /* htt_rx_fse_stats_tlv */
HTT_STATS_PEER_SCHED_STATS_TAG = 99, /* htt_peer_sched_stats_tlv, TOPIC=peer */
HTT_STATS_SCHED_TXQ_SUPERCYCLE_TRIGGER_TAG = 100, /* htt_sched_txq_supercycle_triggers_tlv_v, PUBLISH_FUNC=create_json_response_for_htt_stats_sched_txq */
HTT_STATS_PEER_CTRL_PATH_TXRX_STATS_TAG = 101, /* htt_peer_ctrl_path_txrx_stats_tlv */
HTT_STATS_PDEV_CTRL_PATH_TX_STATS_TAG = 102, /* htt_pdev_ctrl_path_tx_stats_tlv */
HTT_STATS_RX_PDEV_RATE_EXT_STATS_TAG = 103, /* htt_rx_pdev_rate_ext_stats_tlv, PUBLISH_FUNC=create_json_response_for_rx_pdev_rate_ext */
HTT_STATS_TX_PDEV_DL_MU_MIMO_STATS_TAG = 104, /* htt_tx_pdev_dl_mu_mimo_sch_stats_tlv */
HTT_STATS_TX_PDEV_UL_MU_MIMO_STATS_TAG = 105, /* htt_tx_pdev_ul_mu_mimo_sch_stats_tlv */
HTT_STATS_TX_PDEV_DL_MU_OFDMA_STATS_TAG = 106, /* htt_tx_pdev_dl_mu_ofdma_sch_stats_tlv */
HTT_STATS_TX_PDEV_UL_MU_OFDMA_STATS_TAG = 107, /* htt_tx_pdev_ul_mu_ofdma_sch_stats_tlv */
HTT_STATS_PDEV_TX_RATE_TXBF_STATS_TAG = 108, /* htt_tx_peer_rate_txbf_stats_tlv */
HTT_STATS_UNSUPPORTED_ERROR_STATS_TAG = 109, /* htt_stats_error_tlv_v */
HTT_STATS_UNAVAILABLE_ERROR_STATS_TAG = 110, /* htt_stats_error_tlv_v */
HTT_STATS_TX_SELFGEN_AC_SCHED_STATUS_STATS_TAG = 111, /* htt_tx_selfgen_ac_sched_status_stats_tlv */
HTT_STATS_TX_SELFGEN_AX_SCHED_STATUS_STATS_TAG = 112, /* htt_tx_selfgen_ax_sched_status_stats_tlv */
HTT_STATS_TXBF_OFDMA_NDPA_STATS_TAG = 113, /* htt_txbf_ofdma_ndpa_stats_tlv - DEPRECATED */
HTT_STATS_TXBF_OFDMA_NDP_STATS_TAG = 114, /* htt_txbf_ofdma_ndp_stats_tlv - DEPRECATED */
HTT_STATS_TXBF_OFDMA_BRP_STATS_TAG = 115, /* htt_txbf_ofdma_brp_stats_tlv - DEPRECATED */
HTT_STATS_TXBF_OFDMA_STEER_STATS_TAG = 116, /* htt_txbf_ofdma_steer_stats_tlv - DEPRECATED */
HTT_STATS_STA_UL_OFDMA_STATS_TAG = 117, /* htt_sta_ul_ofdma_stats_tlv */
HTT_STATS_VDEV_RTT_RESP_STATS_TAG = 118, /* htt_vdev_rtt_resp_stats_tlv */
HTT_STATS_PKTLOG_AND_HTT_RING_STATS_TAG = 119, /* htt_pktlog_and_htt_ring_stats_tlv */
HTT_STATS_DLPAGER_STATS_TAG = 120, /* htt_dlpager_stats_tlv */
HTT_STATS_PHY_COUNTERS_TAG = 121, /* htt_phy_counters_tlv */
HTT_STATS_PHY_STATS_TAG = 122, /* htt_phy_stats_tlv */
HTT_STATS_PHY_RESET_COUNTERS_TAG = 123, /* htt_phy_reset_counters_tlv */
HTT_STATS_PHY_RESET_STATS_TAG = 124, /* htt_phy_reset_stats_tlv */
HTT_STATS_SOC_TXRX_STATS_COMMON_TAG = 125, /* htt_t2h_soc_txrx_stats_common_tlv */
HTT_STATS_VDEV_TXRX_STATS_HW_STATS_TAG = 126, /* htt_t2h_vdev_txrx_stats_hw_stats_tlv */
HTT_STATS_VDEV_RTT_INIT_STATS_TAG = 127, /* htt_vdev_rtt_init_stats_tlv */
HTT_STATS_PER_RATE_STATS_TAG = 128, /* htt_tx_rate_stats_per_tlv, PUBLISH_FUNC=create_json_response_for_htt_tx_rate_stats_per */
HTT_STATS_MU_PPDU_DIST_TAG = 129, /* htt_pdev_mu_ppdu_dist_tlv, PUBLISH_FUNC=create_json_response_for_htt_stats_mu_ppdu */
HTT_STATS_TX_PDEV_MUMIMO_GRP_STATS_TAG = 130, /* htt_tx_pdev_mumimo_grp_stats_tlv */
HTT_STATS_TX_PDEV_BE_RATE_STATS_TAG = 131, /* htt_tx_pdev_rate_stats_be_tlv, TOPIC=advanced */
HTT_STATS_AST_ENTRY_TAG = 132, /* htt_ast_entry_tlv */
HTT_STATS_TX_PDEV_BE_DL_MU_OFDMA_STATS_TAG = 133, /* htt_tx_pdev_dl_be_mu_ofdma_sch_stats_tlv, TOPIC=advanced */
HTT_STATS_TX_PDEV_BE_UL_MU_OFDMA_STATS_TAG = 134, /* htt_tx_pdev_ul_be_mu_ofdma_sch_stats_tlv, TOPIC=advanced */
HTT_STATS_TX_PDEV_RATE_STATS_BE_OFDMA_TAG = 135, /* htt_tx_pdev_rate_stats_be_ofdma_tlv */
HTT_STATS_RX_PDEV_UL_MUMIMO_TRIG_BE_STATS_TAG = 136, /* htt_rx_pdev_ul_mumimo_trig_be_stats_tlv, TOPIC=advanced */
HTT_STATS_TX_SELFGEN_BE_ERR_STATS_TAG = 137, /* htt_tx_selfgen_be_err_stats_tlv, TOPIC=advanced */
HTT_STATS_TX_SELFGEN_BE_STATS_TAG = 138, /* htt_tx_selfgen_be_stats_tlv, TOPIC=advanced */
HTT_STATS_TX_SELFGEN_BE_SCHED_STATUS_STATS_TAG = 139, /* htt_tx_selfgen_be_sched_status_stats_tlv, TOPIC=advanced */
HTT_STATS_TX_PDEV_BE_UL_MU_MIMO_STATS_TAG = 140, /* htt_tx_pdev_be_ul_mu_mimo_sch_stats_tlv */
HTT_STATS_RX_PDEV_BE_UL_MIMO_USER_STATS_TAG = 141, /* htt_rx_pdev_be_ul_mimo_user_stats_tlv */
HTT_STATS_RX_RING_STATS_TAG = 142, /* htt_rx_fw_ring_stats_tlv_v */
HTT_STATS_RX_PDEV_BE_UL_TRIG_STATS_TAG = 143, /* htt_rx_pdev_be_ul_trigger_stats_tlv, TOPIC=advanced */
HTT_STATS_TX_PDEV_SAWF_RATE_STATS_TAG = 144, /* htt_tx_pdev_rate_stats_sawf_tlv, TOPIC=advanced */
HTT_STATS_STRM_GEN_MPDUS_TAG = 145, /* htt_stats_strm_gen_mpdus_tlv_t */
HTT_STATS_STRM_GEN_MPDUS_DETAILS_TAG = 146, /* htt_stats_strm_gen_mpdus_details_tlv_t */
HTT_STATS_TXBF_OFDMA_AX_NDPA_STATS_TAG = 147, /* htt_txbf_ofdma_ax_ndpa_stats_tlv, PUBLISH_FUNC_FILE=create_json_response_for_txbf_ofdma_wrapper */
HTT_STATS_TXBF_OFDMA_AX_NDP_STATS_TAG = 148, /* htt_txbf_ofdma_ax_ndp_stats_tlv, PUBLISH_FUNC_FILE=create_json_response_for_txbf_ofdma_wrapper */
HTT_STATS_TXBF_OFDMA_AX_BRP_STATS_TAG = 149, /* htt_txbf_ofdma_ax_brp_stats_tlv, PUBLISH_FUNC_FILE=create_json_response_for_txbf_ofdma_wrapper */
HTT_STATS_TXBF_OFDMA_AX_STEER_STATS_TAG = 150, /* htt_txbf_ofdma_ax_steer_stats_tlv, PUBLISH_FUNC_FILE=create_json_response_for_txbf_ofdma_wrapper */
HTT_STATS_TXBF_OFDMA_BE_NDPA_STATS_TAG = 151, /* htt_txbf_ofdma_be_ndpa_stats_tlv, PUBLISH_FUNC_FILE=create_json_response_for_txbf_ofdma_wrapper */
HTT_STATS_TXBF_OFDMA_BE_NDP_STATS_TAG = 152, /* htt_txbf_ofdma_be_ndp_stats_tlv, PUBLISH_FUNC_FILE=create_json_response_for_txbf_ofdma_wrapper */
HTT_STATS_TXBF_OFDMA_BE_BRP_STATS_TAG = 153, /* htt_txbf_ofdma_be_brp_stats_tlv, PUBLISH_FUNC_FILE=create_json_response_for_txbf_ofdma_wrapper */
HTT_STATS_TXBF_OFDMA_BE_STEER_STATS_TAG = 154, /* htt_txbf_ofdma_be_steer_stats_tlv, PUBLISH_FUNC_FILE=create_json_response_for_txbf_ofdma_wrapper */
HTT_STATS_DMAC_RESET_STATS_TAG = 155, /* htt_dmac_reset_stats_tlv */
HTT_STATS_RX_PDEV_BE_UL_OFDMA_USER_STATS_TAG = 156, /* htt_rx_pdev_be_ul_ofdma_user_stats_tlv, TOPIC=advanced */
HTT_STATS_PHY_TPC_STATS_TAG = 157, /* htt_phy_tpc_stats_tlv */
HTT_STATS_PDEV_PUNCTURE_STATS_TAG = 158, /* htt_pdev_puncture_stats_tlv */
HTT_STATS_ML_PEER_DETAILS_TAG = 159, /* htt_ml_peer_details_tlv */
HTT_STATS_ML_PEER_EXT_DETAILS_TAG = 160, /* htt_ml_peer_ext_details_tlv */
HTT_STATS_ML_LINK_INFO_DETAILS_TAG = 161, /* htt_ml_link_info_tlv */
HTT_STATS_TX_PDEV_PPDU_DUR_TAG = 162, /* htt_tx_pdev_ppdu_dur_stats_tlv, TOPIC=advanced */
HTT_STATS_RX_PDEV_PPDU_DUR_TAG = 163, /* htt_rx_pdev_ppdu_dur_stats_tlv, TOPIC=advanced */
HTT_STATS_ODD_PDEV_MANDATORY_TAG = 164, /* htt_odd_mandatory_pdev_stats_tlv */
HTT_STATS_PDEV_SCHED_ALGO_OFDMA_STATS_TAG = 165, /* htt_pdev_sched_algo_ofdma_stats_tlv, PUBLISH_FUNC=create_json_response_for_htt_pdev_sched_algo_ofdma_stats */
HTT_DBG_ODD_MANDATORY_MUMIMO_TAG = 166, /* htt_odd_mandatory_mumimo_pdev_stats_tlv */
HTT_DBG_ODD_MANDATORY_MUOFDMA_TAG = 167, /* htt_odd_mandatory_muofdma_pdev_stats_tlv */
HTT_STATS_LATENCY_PROF_CAL_STATS_TAG = 168, /* htt_latency_prof_cal_stats_tlv - DEPRECATED */
HTT_STATS_TX_PDEV_MUEDCA_PARAMS_STATS_TAG = 169, /* htt_tx_pdev_muedca_params_stats_tlv_v - DEPRECATED */
HTT_STATS_PDEV_BW_MGR_STATS_TAG = 170, /* htt_pdev_bw_mgr_stats_tlv */
HTT_STATS_TX_PDEV_AP_EDCA_PARAMS_STATS_TAG = 171, /* htt_tx_pdev_ap_edca_params_stats_tlv_v, TOPIC=advanced */
HTT_STATS_TXBF_OFDMA_AX_STEER_MPDU_STATS_TAG = 172, /* htt_txbf_ofdma_ax_steer_mpdu_stats_tlv, TOPIC=advanced */
HTT_STATS_TXBF_OFDMA_BE_STEER_MPDU_STATS_TAG = 173, /* htt_txbf_ofdma_be_steer_mpdu_stats_tlv, TOPIC=advanced */
HTT_STATS_PEER_AX_OFDMA_STATS_TAG = 174, /* htt_peer_ax_ofdma_stats_tlv */
HTT_STATS_TX_PDEV_MU_EDCA_PARAMS_STATS_TAG = 175, /* htt_tx_pdev_mu_edca_params_stats_tlv_v, TOPIC=advanced */
HTT_STATS_PDEV_MBSSID_CTRL_FRAME_STATS_TAG = 176, /* htt_pdev_mbssid_ctrl_frame_stats_tlv */
HTT_STATS_TX_PDEV_MLO_ABORT_TAG = 177, /* htt_tx_pdev_stats_mlo_abort_tlv_v */
HTT_STATS_TX_PDEV_MLO_TXOP_ABORT_TAG = 178, /* htt_tx_pdev_stats_mlo_txop_abort_tlv_v */
HTT_STATS_UMAC_SSR_TAG = 179, /* htt_umac_ssr_stats_tlv */
HTT_STATS_PEER_BE_OFDMA_STATS_TAG = 180, /* htt_peer_be_ofdma_stats_tlv */
HTT_STATS_MLO_UMAC_SSR_TRIGGER_TAG = 181, /* htt_mlo_umac_ssr_trigger_stats_tlv */
HTT_STATS_MLO_UMAC_SSR_CMN_TAG = 182, /* htt_mlo_umac_ssr_common_stats_tlv */
HTT_STATS_MLO_UMAC_SSR_KPI_TSTMP_TAG = 183, /* htt_mlo_umac_ssr_kpi_tstamp_stats_tlv */
HTT_STATS_MLO_UMAC_SSR_DBG_TAG = 184, /* htt_mlo_umac_ssr_dbg_tlv */
HTT_STATS_MLO_UMAC_SSR_HANDSHAKE_TAG = 185, /* htt_mlo_umac_htt_handshake_stats_tlv */
HTT_STATS_MLO_UMAC_SSR_MLO_TAG = 186, /* htt_mlo_umac_ssr_mlo_stats_tlv */
HTT_STATS_PDEV_TDMA_TAG = 187, /* htt_pdev_tdma_stats_tlv */
HTT_STATS_CODEL_SVC_CLASS_TAG = 188, /* htt_codel_svc_class_stats_tlv */
HTT_STATS_CODEL_MSDUQ_TAG = 189, /* htt_codel_msduq_stats_tlv */
HTT_STATS_MLO_SCHED_STATS_TAG = 190, /* htt_mlo_sched_stats_tlv */
HTT_STATS_PDEV_MLO_IPC_STATS_TAG = 191, /* htt_pdev_mlo_ipc_stats_tlv */
HTT_STATS_WHAL_WSI_TAG = 192, /* htt_stats_whal_wsi_tlv */
HTT_STATS_LATENCY_PROF_CAL_DATA_TAG = 193, /* htt_stats_latency_prof_cal_data_tlv */
HTT_STATS_PDEV_RTT_RESP_STATS_TAG = 194, /* htt_stats_pdev_rtt_resp_stats_tlv */
HTT_STATS_PDEV_RTT_INIT_STATS_TAG = 195, /* htt_stats_pdev_rtt_init_stats_tlv */
HTT_STATS_PDEV_RTT_HW_STATS_TAG = 196, /* htt_stats_pdev_rtt_hw_stats_tlv */
HTT_STATS_PDEV_RTT_TBR_SELFGEN_QUEUED_STATS_TAG = 197, /* htt_stats_pdev_rtt_tbr_selfgen_queued_stats_tlv */
HTT_STATS_PDEV_RTT_TBR_CMD_RESULT_STATS_TAG = 198, /* htt_stats_pdev_rtt_tbr_cmd_result_stats_tlv */
HTT_STATS_GTX_TAG = 199, /* htt_stats_gtx_tlv */
HTT_STATS_TX_PDEV_WIFI_RADAR_TAG = 200, /* htt_stats_tx_pdev_wifi_radar_tlv */
HTT_STATS_TXBF_OFDMA_BE_PARBW_TAG = 201, /* htt_stats_txbf_ofdma_be_parbw_tlv */
HTT_STATS_RX_PDEV_RSSI_HIST_TAG = 202, /* htt_stats_rx_pdev_rssi_hist_tlv */
HTT_STATS_TX_VDEV_NSS_TAG = 203, /* htt_stats_tx_vdev_nss_tlv */
HTT_STATS_MAX_TAG,
} htt_stats_tlv_tag_t;
/* retain deprecated enum name as an alias for the current enum name */
typedef htt_stats_tlv_tag_t htt_tlv_tag_t;
#define HTT_STATS_TLV_TAG_M 0x00000fff
#define HTT_STATS_TLV_TAG_S 0
#define HTT_STATS_TLV_LENGTH_M 0x00fff000
#define HTT_STATS_TLV_LENGTH_S 12
#define HTT_STATS_TLV_TAG_GET(_var) \
(((_var) & HTT_STATS_TLV_TAG_M) >> \
HTT_STATS_TLV_TAG_S)
#define HTT_STATS_TLV_TAG_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_STATS_TLV_TAG, _val); \
((_var) |= ((_val) << HTT_STATS_TLV_TAG_S)); \
} while (0)
#define HTT_STATS_TLV_LENGTH_GET(_var) \
(((_var) & HTT_STATS_TLV_LENGTH_M) >> \
HTT_STATS_TLV_LENGTH_S)
#define HTT_STATS_TLV_LENGTH_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_STATS_TLV_LENGTH, _val); \
((_var) |= ((_val) << HTT_STATS_TLV_LENGTH_S)); \
} while (0)
/*=== host -> target messages ===============================================*/
enum htt_h2t_msg_type {
HTT_H2T_MSG_TYPE_VERSION_REQ = 0x0,
HTT_H2T_MSG_TYPE_TX_FRM = 0x1,
HTT_H2T_MSG_TYPE_RX_RING_CFG = 0x2,
HTT_H2T_MSG_TYPE_STATS_REQ = 0x3,
HTT_H2T_MSG_TYPE_SYNC = 0x4,
HTT_H2T_MSG_TYPE_AGGR_CFG = 0x5,
HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG = 0x6,
DEPRECATED_HTT_H2T_MSG_TYPE_MGMT_TX = 0x7, /* no longer used */
HTT_H2T_MSG_TYPE_WDI_IPA_CFG = 0x8,
HTT_H2T_MSG_TYPE_WDI_IPA_OP_REQ = 0x9,
HTT_H2T_MSG_TYPE_AGGR_CFG_EX = 0xa, /* per vdev amsdu subfrm limit */
HTT_H2T_MSG_TYPE_SRING_SETUP = 0xb,
HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG = 0xc,
HTT_H2T_MSG_TYPE_ADD_WDS_ENTRY = 0xd,
HTT_H2T_MSG_TYPE_DELETE_WDS_ENTRY = 0xe,
HTT_H2T_MSG_TYPE_RFS_CONFIG = 0xf,
HTT_H2T_MSG_TYPE_EXT_STATS_REQ = 0x10,
HTT_H2T_MSG_TYPE_PPDU_STATS_CFG = 0x11,
HTT_H2T_MSG_TYPE_RX_FSE_SETUP_CFG = 0x12,
HTT_H2T_MSG_TYPE_RX_FSE_OPERATION_CFG = 0x13,
HTT_H2T_MSG_TYPE_CHAN_CALDATA = 0x14,
HTT_H2T_MSG_TYPE_RX_FISA_CFG = 0x15,
HTT_H2T_MSG_TYPE_3_TUPLE_HASH_CFG = 0x16,
HTT_H2T_MSG_TYPE_RX_FULL_MONITOR_MODE = 0x17,
HTT_H2T_MSG_TYPE_HOST_PADDR_SIZE = 0x18,
HTT_H2T_MSG_TYPE_RXDMA_RXOLE_PPE_CFG = 0x19,
HTT_H2T_MSG_TYPE_VDEVS_TXRX_STATS_CFG = 0x1a,
HTT_H2T_MSG_TYPE_TX_MONITOR_CFG = 0x1b,
HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ = 0x1c,
HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ = 0x1d,
HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ = 0x1e,
HTT_H2T_MSG_TYPE_MSI_SETUP = 0x1f,
HTT_H2T_MSG_TYPE_STREAMING_STATS_REQ = 0x20,
HTT_H2T_MSG_TYPE_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP = 0x21,
HTT_H2T_MSG_TYPE_UMAC_HANG_RECOVERY_SOC_START_PRE_RESET = 0x22,
HTT_H2T_MSG_TYPE_RX_CCE_SUPER_RULE_SETUP = 0x23,
HTT_H2T_MSG_TYPE_PRIMARY_LINK_PEER_MIGRATE_RESP = 0x24,
HTT_H2T_MSG_TYPE_TX_LATENCY_STATS_CFG = 0x25,
HTT_H2T_MSG_TYPE_TX_LCE_SUPER_RULE_SETUP = 0x26,
HTT_H2T_MSG_TYPE_SDWF_MSDUQ_RECFG_REQ = 0x27,
/* keep this last */
HTT_H2T_NUM_MSGS
};
/*
* HTT host to target message type -
* stored in bits 7:0 of the first word of the message
*/
#define HTT_H2T_MSG_TYPE_M 0xff
#define HTT_H2T_MSG_TYPE_S 0
#define HTT_H2T_MSG_TYPE_SET(word, msg_type) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_MSG_TYPE, msg_type); \
(word) |= ((msg_type) << HTT_H2T_MSG_TYPE_S); \
} while (0)
#define HTT_H2T_MSG_TYPE_GET(word) \
(((word) & HTT_H2T_MSG_TYPE_M) >> HTT_H2T_MSG_TYPE_S)
/**
* @brief host -> target version number request message definition
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_VERSION_REQ
*
*
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | reserved | msg type |
* |-------------------------------------------------------------------|
* : option request TLV (optional) |
* :...................................................................:
*
* The VER_REQ message may consist of a single 4-byte word, or may be
* extended with TLVs that specify which HTT options the host is requesting
* from the target.
* The following option TLVs may be appended to the VER_REQ message:
* - HL_SUPPRESS_TX_COMPL_IND
* - HL_MAX_TX_QUEUE_GROUPS
* These TLVs may appear in an arbitrary order. Any number of these TLVs
* may be appended to the VER_REQ message (but only one TLV of each type).
*
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a version number request message
* Value: 0x0 (HTT_H2T_MSG_TYPE_VERSION_REQ)
*/
#define HTT_VER_REQ_BYTES 4
/* TBDXXX: figure out a reasonable number */
#define HTT_HL_DATA_SVC_PIPE_DEPTH 24
#define HTT_LL_DATA_SVC_PIPE_DEPTH 64
/**
* @brief HTT tx MSDU descriptor
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_TX_FRM
*
* @details
* The HTT tx MSDU descriptor is created by the host HTT SW for each
* tx MSDU. The HTT tx MSDU descriptor contains the information that
* the target firmware needs for the FW's tx processing, particularly
* for creating the HW msdu descriptor.
* The same HTT tx descriptor is used for HL and LL systems, though
* a few fields within the tx descriptor are used only by LL or
* only by HL.
* The HTT tx descriptor is defined in two manners: by a struct with
* bitfields, and by a series of [dword offset, bit mask, bit shift]
* definitions.
* The target should use the struct def, for simplicitly and clarity,
* but the host shall use the bit-mast + bit-shift defs, to be endian-
* neutral. Specifically, the host shall use the get/set macros built
* around the mask + shift defs.
*/
#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_80211_HDR_S 0
#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_80211_HDR_M 0x1
#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_NO_AGGR_S 1
#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_NO_AGGR_M 0x2
#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_NO_ENCRYPT_S 2
#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_NO_ENCRYPT_M 0x4
#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_NO_CLASSIFY_S 3
#define HTT_TX_MSDU_DESC_RAW_SUBTYPE_NO_CLASSIFY_M 0x8
#define HTT_TX_VDEV_ID_WORD 0
#define HTT_TX_VDEV_ID_MASK 0x3f
#define HTT_TX_VDEV_ID_SHIFT 16
#define HTT_TX_L3_CKSUM_OFFLOAD 1
#define HTT_TX_L4_CKSUM_OFFLOAD 2
#define HTT_TX_MSDU_LEN_DWORD 1
#define HTT_TX_MSDU_LEN_MASK 0xffff;
/*
* HTT_VAR_PADDR macros
* Allow physical / bus addresses to be either a single 32-bit value,
* or a 64-bit value, stored as a little-endian lo,hi pair of 32-bit parts
*/
#define HTT_VAR_PADDR32(var_name) \
A_UINT32 var_name
#define HTT_VAR_PADDR64_LE(var_name) \
struct { \
/* little-endian: lo precedes hi */ \
A_UINT32 lo; \
A_UINT32 hi; \
} var_name
/*
* TEMPLATE_HTT_TX_MSDU_DESC_T:
* This macro defines a htt_tx_msdu_descXXX_t in which any physical
* addresses are stored in a XXX-bit field.
* This macro is used to define both htt_tx_msdu_desc32_t and
* htt_tx_msdu_desc64_t structs.
*/
#define TEMPLATE_HTT_TX_MSDU_DESC_T(_paddr_bits_, _paddr__frags_desc_ptr_) \
PREPACK struct htt_tx_msdu_desc ## _paddr_bits_ ## _t \
{ \
/* DWORD 0: flags and meta-data */ \
A_UINT32 \
msg_type: 8, /* HTT_H2T_MSG_TYPE_TX_FRM */ \
\
/* pkt_subtype - \
* Detailed specification of the tx frame contents, extending the \
* general specification provided by pkt_type. \
* FIX THIS: ADD COMPLETE SPECS FOR THIS FIELDS VALUE, e.g. \
* pkt_type | pkt_subtype \
* ============================================================== \
* 802.3 | bit 0:3 - Reserved \
* | bit 4: 0x0 - Copy-Engine Classification Results \
* | not appended to the HTT message \
* | 0x1 - Copy-Engine Classification Results \
* | appended to the HTT message in the \
* | format: \
* | [HTT tx desc, frame header, \
* | CE classification results] \
* | The CE classification results begin \
* | at the next 4-byte boundary after \
* | the frame header. \
* ------------+------------------------------------------------- \
* Eth2 | bit 0:3 - Reserved \
* | bit 4: 0x0 - Copy-Engine Classification Results \
* | not appended to the HTT message \
* | 0x1 - Copy-Engine Classification Results \
* | appended to the HTT message. \
* | See the above specification of the \
* | CE classification results location. \
* ------------+------------------------------------------------- \
* native WiFi | bit 0:3 - Reserved \
* | bit 4: 0x0 - Copy-Engine Classification Results \
* | not appended to the HTT message \
* | 0x1 - Copy-Engine Classification Results \
* | appended to the HTT message. \
* | See the above specification of the \
* | CE classification results location. \
* ------------+------------------------------------------------- \
* mgmt | 0x0 - 802.11 MAC header absent \
* | 0x1 - 802.11 MAC header present \
* ------------+------------------------------------------------- \
* raw | bit 0: 0x0 - 802.11 MAC header absent \
* | 0x1 - 802.11 MAC header present \
* | bit 1: 0x0 - allow aggregation \
* | 0x1 - don't allow aggregation \
* | bit 2: 0x0 - perform encryption \
* | 0x1 - don't perform encryption \
* | bit 3: 0x0 - perform tx classification / queuing \
* | 0x1 - don't perform tx classification; \
* | insert the frame into the "misc" \
* | tx queue \
* | bit 4: 0x0 - Copy-Engine Classification Results \
* | not appended to the HTT message \
* | 0x1 - Copy-Engine Classification Results \
* | appended to the HTT message. \
* | See the above specification of the \
* | CE classification results location. \
*/ \
pkt_subtype: 5, \
\
/* pkt_type - \
* General specification of the tx frame contents. \
* The htt_pkt_type enum should be used to specify and check the \
* value of this field. \
*/ \
pkt_type: 3, \
\
/* vdev_id - \
* ID for the vdev that is sending this tx frame. \
* For certain non-standard packet types, e.g. pkt_type == raw \
* and (pkt_subtype >> 3) == 1, this field is not relevant/valid. \
* This field is used primarily for determining where to queue \
* broadcast and multicast frames. \
*/ \
vdev_id: 6, \
/* ext_tid - \
* The extended traffic ID. \
* If the TID is unknown, the extended TID is set to \
* HTT_TX_EXT_TID_INVALID. \
* If the tx frame is QoS data, then the extended TID has the 0-15 \
* value of the QoS TID. \
* If the tx frame is non-QoS data, then the extended TID is set to \
* HTT_TX_EXT_TID_NON_QOS. \
* If the tx frame is multicast or broadcast, then the extended TID \
* is set to HTT_TX_EXT_TID_MCAST_BCAST. \
*/ \
ext_tid: 5, \
\
/* postponed - \
* This flag indicates whether the tx frame has been downloaded to \
* the target before but discarded by the target, and now is being \
* downloaded again; or if this is a new frame that is being \
* downloaded for the first time. \
* This flag allows the target to determine the correct order for \
* transmitting new vs. old frames. \
* value: 0 -> new frame, 1 -> re-send of a previously sent frame \
* This flag only applies to HL systems, since in LL systems, \
* the tx flow control is handled entirely within the target. \
*/ \
postponed: 1, \
\
/* extension - \
* This flag indicates whether a HTT tx MSDU extension descriptor \
* (htt_tx_msdu_desc_ext_t) follows this HTT tx MSDU descriptor. \
* \
* 0x0 - no extension MSDU descriptor is present \
* 0x1 - an extension MSDU descriptor immediately follows the \
* regular MSDU descriptor \
*/ \
extension: 1, \
\
/* cksum_offload - \
* This flag indicates whether checksum offload is enabled or not \
* for this frame. Target FW use this flag to turn on HW checksumming \
* 0x0 - No checksum offload \
* 0x1 - L3 header checksum only \
* 0x2 - L4 checksum only \
* 0x3 - L3 header checksum + L4 checksum \
*/ \
cksum_offload: 2, \
\
/* tx_comp_req - \
* This flag indicates whether Tx Completion \
* from fw is required or not. \
* This flag is only relevant if tx completion is not \
* universally enabled. \
* For all LL systems, tx completion is mandatory, \
* so this flag will be irrelevant. \
* For HL systems tx completion is optional, but HL systems in which \
* the bus throughput exceeds the WLAN throughput will \
* probably want to always use tx completion, and thus \
* would not check this flag. \
* This flag is required when tx completions are not used universally, \
* but are still required for certain tx frames for which \
* an OTA delivery acknowledgment is needed by the host. \
* In practice, this would be for HL systems in which the \
* bus throughput is less than the WLAN throughput. \
* \
* 0x0 - Tx Completion Indication from Fw not required \
* 0x1 - Tx Completion Indication from Fw is required \
*/ \
tx_compl_req: 1; \
\
\
/* DWORD 1: MSDU length and ID */ \
A_UINT32 \
len: 16, /* MSDU length, in bytes */ \
id: 16; /* MSDU ID used to identify the MSDU to the host, \
* and this id is used to calculate fragmentation \
* descriptor pointer inside the target based on \
* the base address, configured inside the target. \
*/ \
\
/* DWORD 2 (or 2-3): fragmentation descriptor bus address */ \
/* frags_desc_ptr - \
* The fragmentation descriptor pointer tells the HW's MAC DMA \
* where the tx frame's fragments reside in memory. \
* This field only applies to LL systems, since in HL systems the \
* (degenerate single-fragment) fragmentation descriptor is created \
* within the target. \
*/ \
_paddr__frags_desc_ptr_; \
\
/* DWORD 3 (or 4): peerid, chanfreq */ \
/* \
* Peer ID : Target can use this value to know which peer-id packet \
* destined to. \
* It's intended to be specified by host in case of NAWDS. \
*/ \
A_UINT16 peerid; \
\
/* \
* Channel frequency: This identifies the desired channel \
* frequency (in mhz) for tx frames. This is used by FW to help \
* determine when it is safe to transmit or drop frames for \
* off-channel operation. \
* The default value of zero indicates to FW that the corresponding \
* VDEV's home channel (if there is one) is the desired channel \
* frequency. \
*/ \
A_UINT16 chanfreq; \
\
/* Reason reserved is commented is increasing the htt structure size \
* leads to some weird issues. \
* A_UINT32 reserved_dword3_bits0_31; \
*/ \
} POSTPACK
/* define a htt_tx_msdu_desc32_t type */
TEMPLATE_HTT_TX_MSDU_DESC_T(32, HTT_VAR_PADDR32(frags_desc_ptr));
/* define a htt_tx_msdu_desc64_t type */
TEMPLATE_HTT_TX_MSDU_DESC_T(64, HTT_VAR_PADDR64_LE(frags_desc_ptr));
/*
* Make htt_tx_msdu_desc_t be an alias for either
* htt_tx_msdu_desc32_t or htt_tx_msdu_desc64_t
*/
#if HTT_PADDR64
#define htt_tx_msdu_desc_t htt_tx_msdu_desc64_t
#else
#define htt_tx_msdu_desc_t htt_tx_msdu_desc32_t
#endif
/* decriptor information for Management frame*/
/*
* THIS htt_mgmt_tx_desc_t STRUCT IS DEPRECATED - DON'T USE IT.
* BOTH MANAGEMENT AND DATA FRAMES SHOULD USE htt_tx_msdu_desc_t.
*/
#define HTT_MGMT_FRM_HDR_DOWNLOAD_LEN 32
extern A_UINT32 mgmt_hdr_len;
PREPACK struct htt_mgmt_tx_desc_t {
A_UINT32 msg_type;
#if HTT_PADDR64
A_UINT64 frag_paddr; /* DMAble address of the data */
#else
A_UINT32 frag_paddr; /* DMAble address of the data */
#endif
A_UINT32 desc_id; /* returned to host during completion
* to free the meory*/
A_UINT32 len; /* Fragment length */
A_UINT32 vdev_id; /* virtual device ID*/
A_UINT8 hdr[HTT_MGMT_FRM_HDR_DOWNLOAD_LEN]; /* frm header */
} POSTPACK;
PREPACK struct htt_mgmt_tx_compl_ind {
A_UINT32 desc_id;
A_UINT32 status;
} POSTPACK;
/*
* This SDU header size comes from the summation of the following:
* 1. Max of:
* a. Native WiFi header, for native WiFi frames: 24 bytes
* (frame control, duration / ID, addr1, addr2, addr3, seq ctrl, addr4)
* b. 802.11 header, for raw frames: 36 bytes
* (frame control, duration / ID, addr1, addr2, addr3, seq ctrl, addr4,
* QoS header, HT header)
* c. 802.3 header, for ethernet frames: 14 bytes
* (destination address, source address, ethertype / length)
* 2. Max of:
* a. IPv4 header, up through the DiffServ Code Point: 2 bytes
* b. IPv6 header, up through the Traffic Class: 2 bytes
* 3. 802.1Q VLAN header: 4 bytes
* 4. LLC/SNAP header: 8 bytes
*/
#define HTT_TX_HDR_SIZE_NATIVE_WIFI 30
#define HTT_TX_HDR_SIZE_802_11_RAW 36
#define HTT_TX_HDR_SIZE_ETHERNET 14
#define HTT_TX_HDR_SIZE_OUTER_HDR_MAX HTT_TX_HDR_SIZE_802_11_RAW
A_COMPILE_TIME_ASSERT(
htt_encap_hdr_size_max_check_nwifi,
HTT_TX_HDR_SIZE_OUTER_HDR_MAX >= HTT_TX_HDR_SIZE_NATIVE_WIFI);
A_COMPILE_TIME_ASSERT(
htt_encap_hdr_size_max_check_enet,
HTT_TX_HDR_SIZE_OUTER_HDR_MAX >= HTT_TX_HDR_SIZE_ETHERNET);
#define HTT_HL_TX_HDR_SIZE_IP 1600 /* also include payload */
#define HTT_LL_TX_HDR_SIZE_IP 16 /* up to the end of UDP header for IPv4 case */
#define HTT_TX_HDR_SIZE_802_1Q 4
#define HTT_TX_HDR_SIZE_LLC_SNAP 8
#define HTT_COMMON_TX_FRM_HDR_LEN \
(HTT_TX_HDR_SIZE_OUTER_HDR_MAX + \
HTT_TX_HDR_SIZE_802_1Q + \
HTT_TX_HDR_SIZE_LLC_SNAP)
#define HTT_HL_TX_FRM_HDR_LEN \
(HTT_COMMON_TX_FRM_HDR_LEN + HTT_HL_TX_HDR_SIZE_IP)
#define HTT_LL_TX_FRM_HDR_LEN \
(HTT_COMMON_TX_FRM_HDR_LEN + HTT_LL_TX_HDR_SIZE_IP)
#define HTT_TX_DESC_LEN sizeof(struct htt_tx_msdu_desc_t)
/* dword 0 */
#define HTT_TX_DESC_PKT_SUBTYPE_OFFSET_BYTES 0
#define HTT_TX_DESC_PKT_SUBTYPE_OFFSET_DWORD 0
#define HTT_TX_DESC_PKT_SUBTYPE_M 0x00001f00
#define HTT_TX_DESC_PKT_SUBTYPE_S 8
#define HTT_TX_DESC_NO_ENCRYPT_OFFSET_BYTES 0
#define HTT_TX_DESC_NO_ENCRYPT_OFFSET_DWORD 0
#define HTT_TX_DESC_NO_ENCRYPT_M 0x00000400
#define HTT_TX_DESC_NO_ENCRYPT_S 10
#define HTT_TX_DESC_PKT_TYPE_OFFSET_BYTES 0
#define HTT_TX_DESC_PKT_TYPE_OFFSET_DWORD 0
#define HTT_TX_DESC_PKT_TYPE_M 0x0000e000
#define HTT_TX_DESC_PKT_TYPE_S 13
#define HTT_TX_DESC_VDEV_ID_OFFSET_BYTES 0
#define HTT_TX_DESC_VDEV_ID_OFFSET_DWORD 0
#define HTT_TX_DESC_VDEV_ID_M 0x003f0000
#define HTT_TX_DESC_VDEV_ID_S 16
#define HTT_TX_DESC_EXT_TID_OFFSET_BYTES 0
#define HTT_TX_DESC_EXT_TID_OFFSET_DWORD 0
#define HTT_TX_DESC_EXT_TID_M 0x07c00000
#define HTT_TX_DESC_EXT_TID_S 22
#define HTT_TX_DESC_POSTPONED_OFFSET_BYTES 0
#define HTT_TX_DESC_POSTPONED_OFFSET_DWORD 0
#define HTT_TX_DESC_POSTPONED_M 0x08000000
#define HTT_TX_DESC_POSTPONED_S 27
#define HTT_TX_DESC_EXTENSION_OFFSET_BYTE 0
#define HTT_TX_DESC_EXTENSION_OFFSET_DWORD 0
#define HTT_TX_DESC_EXTENSION_M 0x10000000
#define HTT_TX_DESC_EXTENSION_S 28
#define HTT_TX_DESC_CKSUM_OFFLOAD_OFFSET_BYTES 0
#define HTT_TX_DESC_CKSUM_OFFLOAD_OFFSET_DWORD 0
#define HTT_TX_DESC_CKSUM_OFFLOAD_M 0x60000000
#define HTT_TX_DESC_CKSUM_OFFLOAD_S 29
#define HTT_TX_DESC_TX_COMP_OFFSET_BYTES 0
#define HTT_TX_DESC_TX_COMP_OFFSET_DWORD 0
#define HTT_TX_DESC_TX_COMP_M 0x80000000
#define HTT_TX_DESC_TX_COMP_S 31
/* dword 1 */
#define HTT_TX_DESC_FRM_LEN_OFFSET_BYTES 4
#define HTT_TX_DESC_FRM_LEN_OFFSET_DWORD 1
#define HTT_TX_DESC_FRM_LEN_M 0x0000ffff
#define HTT_TX_DESC_FRM_LEN_S 0
#define HTT_TX_DESC_FRM_ID_OFFSET_BYTES 4
#define HTT_TX_DESC_FRM_ID_OFFSET_DWORD 1
#define HTT_TX_DESC_FRM_ID_M 0xffff0000
#define HTT_TX_DESC_FRM_ID_S 16
/* dword 2 */
#define HTT_TX_DESC_FRAGS_DESC_PADDR_OFFSET_BYTES 8
#define HTT_TX_DESC_FRAGS_DESC_PADDR_OFFSET_DWORD 2
/* for systems using 64-bit format for bus addresses */
#define HTT_TX_DESC_FRAGS_DESC_PADDR_HI_M 0xffffffff
#define HTT_TX_DESC_FRAGS_DESC_PADDR_HI_S 0
#define HTT_TX_DESC_FRAGS_DESC_PADDR_LO_M 0xffffffff
#define HTT_TX_DESC_FRAGS_DESC_PADDR_LO_S 0
/* for systems using 32-bit format for bus addresses */
#define HTT_TX_DESC_FRAGS_DESC_PADDR_M 0xffffffff
#define HTT_TX_DESC_FRAGS_DESC_PADDR_S 0
/* dword 3 */
#define HTT_TX_DESC_PEER_ID_OFFSET_BYTES_64 16
#define HTT_TX_DESC_PEER_ID_OFFSET_BYTES_32 12
#define HTT_TX_DESC_PEER_ID_OFFSET_DWORD_64 \
(HTT_TX_DESC_PEER_ID_OFFSET_BYTES_64 >> 2)
#define HTT_TX_DESC_PEER_ID_OFFSET_DWORD_32 \
(HTT_TX_DESC_PEER_ID_OFFSET_BYTES_32 >> 2)
#if HTT_PADDR64
#define HTT_TX_DESC_PEER_ID_OFFSET_BYTES HTT_TX_DESC_PEER_ID_OFFSET_BYTES_64
#define HTT_TX_DESC_PEER_ID_OFFSET_DWORD HTT_TX_DESC_PEER_ID_OFFSET_DWORD_64
#else
#define HTT_TX_DESC_PEER_ID_OFFSET_BYTES HTT_TX_DESC_PEER_ID_OFFSET_BYTES_32
#define HTT_TX_DESC_PEER_ID_OFFSET_DWORD HTT_TX_DESC_PEER_ID_OFFSET_DWORD_32
#endif
#define HTT_TX_DESC_PEER_ID_M 0x0000ffff
#define HTT_TX_DESC_PEER_ID_S 0
/*
* TEMPORARY:
* The original definitions for the PEER_ID fields contained typos
* (with _DESC_PADDR appended to this PEER_ID field name).
* Retain deprecated original names for PEER_ID fields until all code that
* refers to them has been updated.
*/
#define HTT_TX_DESC_PEERID_DESC_PADDR_OFFSET_BYTES \
HTT_TX_DESC_PEER_ID_OFFSET_BYTES
#define HTT_TX_DESC_PEERID_DESC_PADDR_OFFSET_DWORD \
HTT_TX_DESC_PEER_ID_OFFSET_DWORD
#define HTT_TX_DESC_PEERID_DESC_PADDR_M \
HTT_TX_DESC_PEER_ID_M
#define HTT_TX_DESC_PEERID_DESC_PADDR_S \
HTT_TX_DESC_PEER_ID_S
#define HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES_64 16 /* to dword with chan freq */
#define HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES_32 12 /* to dword with chan freq */
#define HTT_TX_DESC_CHAN_FREQ_OFFSET_DWORD_64 \
(HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES_64 >> 2)
#define HTT_TX_DESC_CHAN_FREQ_OFFSET_DWORD_32 \
(HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES_32 >> 2)
#if HTT_PADDR64
#define HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES_64
#define HTT_TX_DESC_CHAN_FREQ_OFFSET_DWORD HTT_TX_DESC_CHAN_FREQ_OFFSET_DWORD_64
#else
#define HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES HTT_TX_DESC_CHAN_FREQ_OFFSET_BYTES_32
#define HTT_TX_DESC_CHAN_FREQ_OFFSET_DWORD HTT_TX_DESC_CHAN_FREQ_OFFSET_DWORD_32
#endif
#define HTT_TX_DESC_CHAN_FREQ_M 0xffff0000
#define HTT_TX_DESC_CHAN_FREQ_S 16
#define HTT_TX_DESC_PKT_SUBTYPE_GET(_var) \
(((_var) & HTT_TX_DESC_PKT_SUBTYPE_M) >> HTT_TX_DESC_PKT_SUBTYPE_S)
#define HTT_TX_DESC_PKT_SUBTYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_PKT_SUBTYPE, _val); \
((_var) |= ((_val) << HTT_TX_DESC_PKT_SUBTYPE_S)); \
} while (0)
#define HTT_TX_DESC_NO_ENCRYPT_GET(_var) \
(((_var) & HTT_TX_DESC_NO_ENCRYPT_M) >> HTT_TX_DESC_NO_ENCRYPT_S)
#define HTT_TX_DESC_NO_ENCRYPT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_NO_ENCRYPT, _val); \
((_var) |= ((_val) << HTT_TX_DESC_NO_ENCRYPT_S)); \
} while (0)
#define HTT_TX_DESC_PKT_TYPE_GET(_var) \
(((_var) & HTT_TX_DESC_PKT_TYPE_M) >> HTT_TX_DESC_PKT_TYPE_S)
#define HTT_TX_DESC_PKT_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_PKT_TYPE, _val); \
((_var) |= ((_val) << HTT_TX_DESC_PKT_TYPE_S)); \
} while (0)
#define HTT_TX_DESC_VDEV_ID_GET(_var) \
(((_var) & HTT_TX_DESC_VDEV_ID_M) >> HTT_TX_DESC_VDEV_ID_S)
#define HTT_TX_DESC_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_TX_DESC_VDEV_ID_S)); \
} while (0)
#define HTT_TX_DESC_EXT_TID_GET(_var) \
(((_var) & HTT_TX_DESC_EXT_TID_M) >> HTT_TX_DESC_EXT_TID_S)
#define HTT_TX_DESC_EXT_TID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_EXT_TID, _val); \
((_var) |= ((_val) << HTT_TX_DESC_EXT_TID_S)); \
} while (0)
#define HTT_TX_DESC_POSTPONED_GET(_var) \
(((_var) & HTT_TX_DESC_POSTPONED_M) >> HTT_TX_DESC_POSTPONED_S)
#define HTT_TX_DESC_POSTPONED_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_POSTPONED, _val); \
((_var) |= ((_val) << HTT_TX_DESC_POSTPONED_S)); \
} while (0)
#define HTT_TX_DESC_EXTENSION_GET(_var) \
(((_var) & HTT_TX_DESC_EXTENSION_M) >> HTT_TX_DESC_EXTENSION_S)
#define HTT_TX_DESC_EXTENSION_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_EXTENSION, _val); \
((_var) |= ((_val) << HTT_TX_DESC_EXTENSION_S)); \
} while (0)
#define HTT_TX_DESC_FRM_LEN_GET(_var) \
(((_var) & HTT_TX_DESC_FRM_LEN_M) >> HTT_TX_DESC_FRM_LEN_S)
#define HTT_TX_DESC_FRM_LEN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_FRM_LEN, _val); \
((_var) |= ((_val) << HTT_TX_DESC_FRM_LEN_S)); \
} while (0)
#define HTT_TX_DESC_FRM_ID_GET(_var) \
(((_var) & HTT_TX_DESC_FRM_ID_M) >> HTT_TX_DESC_FRM_ID_S)
#define HTT_TX_DESC_FRM_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_FRM_ID, _val); \
((_var) |= ((_val) << HTT_TX_DESC_FRM_ID_S)); \
} while (0)
#define HTT_TX_DESC_CKSUM_OFFLOAD_GET(_var) \
(((_var) & HTT_TX_DESC_CKSUM_OFFLOAD_M) >> HTT_TX_DESC_CKSUM_OFFLOAD_S)
#define HTT_TX_DESC_CKSUM_OFFLOAD_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_CKSUM_OFFLOAD, _val); \
((_var) |= ((_val) << HTT_TX_DESC_CKSUM_OFFLOAD_S)); \
} while (0)
#define HTT_TX_DESC_TX_COMP_GET(_var) \
(((_var) & HTT_TX_DESC_TX_COMP_M) >> HTT_TX_DESC_TX_COMP_S)
#define HTT_TX_DESC_TX_COMP_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_TX_COMP, _val); \
((_var) |= ((_val) << HTT_TX_DESC_TX_COMP_S)); \
} while (0)
#define HTT_TX_DESC_PEER_ID_GET(_var) \
(((_var) & HTT_TX_DESC_PEER_ID_M) >> HTT_TX_DESC_PEER_ID_S)
#define HTT_TX_DESC_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_PEER_ID, _val); \
((_var) |= ((_val) << HTT_TX_DESC_PEER_ID_S)); \
} while (0)
#define HTT_TX_DESC_CHAN_FREQ_GET(_var) \
(((_var) & HTT_TX_DESC_CHAN_FREQ_M) >> HTT_TX_DESC_CHAN_FREQ_S)
#define HTT_TX_DESC_CHAN_FREQ_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_DESC_CHAN_FREQ, _val); \
((_var) |= ((_val) << HTT_TX_DESC_CHAN_FREQ_S)); \
} while (0)
/* enums used in the HTT tx MSDU extension descriptor */
enum {
htt_tx_guard_interval_regular = 0,
htt_tx_guard_interval_short = 1,
};
enum {
htt_tx_preamble_type_ofdm = 0,
htt_tx_preamble_type_cck = 1,
htt_tx_preamble_type_ht = 2,
htt_tx_preamble_type_vht = 3,
};
enum {
htt_tx_bandwidth_5MHz = 0,
htt_tx_bandwidth_10MHz = 1,
htt_tx_bandwidth_20MHz = 2,
htt_tx_bandwidth_40MHz = 3,
htt_tx_bandwidth_80MHz = 4,
htt_tx_bandwidth_160MHz = 5, /* includes 80+80 */
};
/**
* @brief HTT tx MSDU extension descriptor
* @details
* If the target supports HTT tx MSDU extension descriptors, the host has
* the option of appending the following struct following the regular
* HTT tx MSDU descriptor (and setting the "extension" flag in the regular
* HTT tx MSDU descriptor, to show that the extension descriptor is present).
* The HTT tx MSDU extension descriptors allows the host to provide detailed
* tx specs for each frame.
*/
PREPACK struct htt_tx_msdu_desc_ext_t {
/* DWORD 0: flags */
A_UINT32
valid_pwr: 1, /* bit 0: if set, tx pwr spec is valid */
valid_mcs_mask: 1, /* bit 1: if set, tx MCS mask spec is valid */
valid_nss_mask: 1, /* bit 2: if set, tx Nss mask spec is valid */
valid_guard_interval: 1, /* bit 3: if set, tx guard intv spec is valid*/
valid_preamble_type_mask: 1, /* 4: if set, tx preamble mask is valid */
valid_chainmask: 1, /* bit 5: if set, tx chainmask spec is valid */
valid_retries: 1, /* bit 6: if set, tx retries spec is valid */
valid_bandwidth: 1, /* bit 7: if set, tx bandwidth spec is valid */
valid_expire_tsf: 1, /* bit 8: if set, tx expire TSF spec is valid*/
is_dsrc: 1, /* bit 9: if set, MSDU is a DSRC frame */
reserved0_31_7: 22; /* bits 31:10 - unused, set to 0x0 */
/* DWORD 1: tx power, tx rate, tx BW */
A_UINT32
/* pwr -
* Specify what power the tx frame needs to be transmitted at.
* The power a signed (two's complement) value is in units of 0.5 dBm.
* The value needs to be appropriately sign-extended when extracting
* the value from the message and storing it in a variable that is
* larger than A_INT8. (The HTT_TX_MSDU_EXT_DESC_FLAG_PWR_GET macro
* automatically handles this sign-extension.)
* If the transmission uses multiple tx chains, this power spec is
* the total transmit power, assuming incoherent combination of
* per-chain power to produce the total power.
*/
pwr: 8,
/* mcs_mask -
* Specify the allowable values for MCS index (modulation and coding)
* to use for transmitting the frame.
*
* For HT / VHT preamble types, this mask directly corresponds to
* the HT or VHT MCS indices that are allowed. For each bit N set
* within the mask, MCS index N is allowed for transmitting the frame.
* For legacy CCK and OFDM rates, separate bits are provided for CCK
* rates versus OFDM rates, so the host has the option of specifying
* that the target must transmit the frame with CCK or OFDM rates
* (not HT or VHT), but leaving the decision to the target whether
* to use CCK or OFDM.
*
* For CCK and OFDM, the bits within this mask are interpreted as
* follows:
* bit 0 -> CCK 1 Mbps rate is allowed
* bit 1 -> CCK 2 Mbps rate is allowed
* bit 2 -> CCK 5.5 Mbps rate is allowed
* bit 3 -> CCK 11 Mbps rate is allowed
* bit 4 -> OFDM BPSK modulation, 1/2 coding rate is allowed
* bit 5 -> OFDM BPSK modulation, 3/4 coding rate is allowed
* bit 6 -> OFDM QPSK modulation, 1/2 coding rate is allowed
* bit 7 -> OFDM QPSK modulation, 3/4 coding rate is allowed
* bit 8 -> OFDM 16-QAM modulation, 1/2 coding rate is allowed
* bit 9 -> OFDM 16-QAM modulation, 3/4 coding rate is allowed
* bit 10 -> OFDM 64-QAM modulation, 2/3 coding rate is allowed
* bit 11 -> OFDM 64-QAM modulation, 3/4 coding rate is allowed
*
* The MCS index specification needs to be compatible with the
* bandwidth mask specification. For example, a MCS index == 9
* specification is inconsistent with a preamble type == VHT,
* Nss == 1, and channel bandwidth == 20 MHz.
*
* Furthermore, the host has only a limited ability to specify to
* the target to select from HT + legacy rates, or VHT + legacy rates,
* since this mcs_mask can specify either HT/VHT rates or legacy rates.
*/
mcs_mask: 12,
/* nss_mask -
* Specify which numbers of spatial streams (MIMO factor) are permitted.
* Each bit in this mask corresponds to a Nss value:
* bit 0: if set, Nss = 1 (non-MIMO) is permitted
* bit 1: if set, Nss = 2 (2x2 MIMO) is permitted
* bit 2: if set, Nss = 3 (3x3 MIMO) is permitted
* bit 3: if set, Nss = 4 (4x4 MIMO) is permitted
* The values in the Nss mask must be suitable for the recipient, e.g.
* a value of 0x4 (Nss = 3) cannot be specified for a tx frame to a
* recipient which only supports 2x2 MIMO.
*/
nss_mask: 4,
/* guard_interval -
* Specify a htt_tx_guard_interval enum value to indicate whether
* the transmission should use a regular guard interval or a
* short guard interval.
*/
guard_interval: 1,
/* preamble_type_mask -
* Specify which preamble types (CCK, OFDM, HT, VHT) the target
* may choose from for transmitting this frame.
* The bits in this mask correspond to the values in the
* htt_tx_preamble_type enum. For example, to allow the target
* to transmit the frame as either CCK or OFDM, this field would
* be set to
* (1 << htt_tx_preamble_type_ofdm) |
* (1 << htt_tx_preamble_type_cck)
*/
preamble_type_mask: 4,
reserved1_31_29: 3; /* unused, set to 0x0 */
/* DWORD 2: tx chain mask, tx retries */
A_UINT32
/* chain_mask - specify which chains to transmit from */
chain_mask: 4,
/* retry_limit -
* Specify the maximum number of transmissions, including the
* initial transmission, to attempt before giving up if no ack
* is received.
* If the tx rate is specified, then all retries shall use the
* same rate as the initial transmission.
* If no tx rate is specified, the target can choose whether to
* retain the original rate during the retransmissions, or to
* fall back to a more robust rate.
*/
retry_limit: 4,
/* bandwidth_mask -
* Specify what channel widths may be used for the transmission.
* A value of zero indicates "don't care" - the target may choose
* the transmission bandwidth.
* The bits within this mask correspond to the htt_tx_bandwidth
* enum values - bit 0 is for 5 MHz, bit 1 is for 10 MHz, etc.
* The bandwidth_mask must be consistent with the preamble_type_mask
* and mcs_mask specs, if they are provided. For example, 80 MHz and
* 160 MHz can only be enabled in the mask if preamble_type == VHT.
*/
bandwidth_mask: 6,
reserved2_31_14: 18; /* unused, set to 0x0 */
/* DWORD 3: tx expiry time (TSF) LSBs */
A_UINT32 expire_tsf_lo;
/* DWORD 4: tx expiry time (TSF) MSBs */
A_UINT32 expire_tsf_hi;
A_UINT32 reserved_for_future_expansion_set_to_zero[3];
} POSTPACK;
/* DWORD 0 */
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_M 0x00000001
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_S 0
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_M 0x00000002
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_S 1
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_NSS_MASK_M 0x00000004
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_NSS_MASK_S 2
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_M 0x00000008
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_S 3
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_M 0x00000010
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_S 4
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_M 0x00000020
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_S 5
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_M 0x00000040
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_S 6
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_M 0x00000080
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_S 7
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_M 0x00000100
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_S 8
#define HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_M 0x00000200
#define HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_S 9
/* DWORD 1 */
#define HTT_TX_MSDU_EXT_DESC_PWR_M 0x000000ff
#define HTT_TX_MSDU_EXT_DESC_PWR_S 0
#define HTT_TX_MSDU_EXT_DESC_MCS_MASK_M 0x000fff00
#define HTT_TX_MSDU_EXT_DESC_MCS_MASK_S 8
#define HTT_TX_MSDU_EXT_DESC_NSS_MASK_M 0x00f00000
#define HTT_TX_MSDU_EXT_DESC_NSS_MASK_S 20
#define HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_M 0x01000000
#define HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_S 24
#define HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_M 0x1c000000
#define HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_S 25
/* DWORD 2 */
#define HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_M 0x0000000f
#define HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_S 0
#define HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_M 0x000000f0
#define HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_S 4
#define HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_M 0x00003f00
#define HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_S 8
/* DWORD 0 */
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_M) >> \
HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_S)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_S)); \
} while (0)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_M) >> \
HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_S)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_MCS_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_M) >> \
HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_S)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL( \
HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL, _val); \
((_var) |= ((_val) \
<< HTT_TX_MSDU_EXT_DESC_FLAG_VALID_GUARD_INTERVAL_S)); \
} while (0)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_M) >> \
HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_S)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL( \
HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK, _val); \
((_var) |= ((_val) \
<< HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PREAMBLE_TYPE_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_M) >> \
HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_S)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_CHAIN_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_M) >> \
HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_S)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_RETRIES_S)); \
} while (0)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_M) >> \
HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_S)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_BANDWIDTH_S)); \
} while (0)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_M) >> \
HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_S)
#define HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_VALID_EXPIRE_TIME_S));\
} while (0)
#define HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_M) >> \
HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_S)
#define HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_FLAG_IS_DSRC_S)); \
} while (0)
/* DWORD 1 */
#define HTT_TX_MSDU_EXT_DESC_PWR_GET_BASE(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_PWR_M) >> \
HTT_TX_MSDU_EXT_DESC_PWR_S)
#define HTT_TX_MSDU_EXT_DESC_PWR_GET(_var) \
(HTT_TX_MSDU_EXT_DESC_PWR_GET_BASE(_var) | \
HTT_SIGN_BIT_EXTENSION_MASK(_var, HTT_TX_MSDU_EXT_DESC_PWR))
#define HTT_TX_MSDU_EXT_DESC_PWR_SET(_var, _val) \
((_var) |= (((_val) << HTT_TX_MSDU_EXT_DESC_PWR_S)) & \
HTT_TX_MSDU_EXT_DESC_PWR_M)
#define HTT_TX_MSDU_EXT_DESC_MCS_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_MCS_MASK_M) >> \
HTT_TX_MSDU_EXT_DESC_MCS_MASK_S)
#define HTT_TX_MSDU_EXT_DESC_MCS_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_MCS_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_MCS_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT_DESC_NSS_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_NSS_MASK_M) >> \
HTT_TX_MSDU_EXT_DESC_NSS_MASK_S)
#define HTT_TX_MSDU_EXT_DESC_NSS_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_NSS_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_NSS_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_M) >> \
HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_S)
#define HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_GUARD_INTERVAL_S)); \
} while (0)
#define HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_M) >> \
HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_S)
#define HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_PREAMBLE_TYPE_MASK_S)); \
} while (0)
/* DWORD 2 */
#define HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_M) >> \
HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_S)
#define HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_CHAIN_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_CHAIN_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_M) >> \
HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_S)
#define HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_RETRY_LIMIT_S)); \
} while (0)
#define HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_M) >> \
HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_S)
#define HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT_DESC_BANDWIDTH_MASK_S)); \
} while (0)
typedef enum {
HTT_11AX_HE_LTF_SUBTYPE_1X,
HTT_11AX_HE_LTF_SUBTYPE_2X,
HTT_11AX_HE_LTF_SUBTYPE_4X,
} htt_11ax_ltf_subtype_t;
typedef enum {
HTT_TX_MSDU_EXT2_DESC_PREAM_OFDM,
HTT_TX_MSDU_EXT2_DESC_PREAM_CCK,
HTT_TX_MSDU_EXT2_DESC_PREAM_HT ,
HTT_TX_MSDU_EXT2_DESC_PREAM_VHT,
HTT_TX_MSDU_EXT2_DESC_PREAM_HE_SU,
HTT_TX_MSDU_EXT2_DESC_PREAM_HE_EXT_SU,
} htt_tx_ext2_preamble_type_t;
#define HTT_TX_MSDU_EXT2_DESC_BW_5MHZ_M 0x00000001
#define HTT_TX_MSDU_EXT2_DESC_BW_5MHZ_S 0
#define HTT_TX_MSDU_EXT2_DESC_BW_10MHZ_M 0x00000002
#define HTT_TX_MSDU_EXT2_DESC_BW_10MHZ_S 1
#define HTT_TX_MSDU_EXT2_DESC_BW_20MHZ_M 0x00000004
#define HTT_TX_MSDU_EXT2_DESC_BW_20MHZ_S 2
#define HTT_TX_MSDU_EXT2_DESC_BW_40MHZ_M 0x00000008
#define HTT_TX_MSDU_EXT2_DESC_BW_40MHZ_S 3
#define HTT_TX_MSDU_EXT2_DESC_BW_80MHZ_M 0x00000010
#define HTT_TX_MSDU_EXT2_DESC_BW_80MHZ_S 4
#define HTT_TX_MSDU_EXT2_DESC_BW_160MHZ_M 0x00000020
#define HTT_TX_MSDU_EXT2_DESC_BW_160MHZ_S 5
/* Rx buffer addr qdata ctrl pkt */
struct htt_h2t_rx_buffer_addr_info {
A_UINT32 buffer_addr_31_0 : 32; // [31:0]
A_UINT32 buffer_addr_39_32 : 8, // [7:0]
return_buffer_manager : 4, // [11:8]
sw_buffer_cookie : 20; // [31:12]
};
/**
* @brief HTT tx MSDU extension descriptor v2
* @details
* In Lithium, if htt_tx_tcl_metadata->valid_htt_ext is set, this structure
* is received as tcl_exit_base->host_meta_info in firmware.
* Also there is no htt_tx_msdu_desc_t in Lithium since most of those fields
* are already part of tcl_exit_base.
*/
PREPACK struct htt_tx_msdu_desc_ext2_t {
/* DWORD 0: flags */
A_UINT32
valid_pwr : 1, /* if set, tx pwr spec is valid */
valid_mcs_mask : 1, /* if set, tx MCS mask is valid */
valid_nss_mask : 1, /* if set, tx Nss mask is valid */
valid_preamble_type : 1, /* if set, tx preamble spec is valid */
valid_retries : 1, /* if set, tx retries spec is valid */
valid_bw_info : 1, /* if set, tx dyn_bw and bw_mask are valid */
valid_guard_interval : 1, /* if set, tx guard intv spec is valid */
valid_chainmask : 1, /* if set, tx chainmask is valid */
valid_encrypt_type : 1, /* if set, encrypt type is valid */
valid_key_flags : 1, /* if set, key flags is valid */
valid_expire_tsf : 1, /* if set, tx expire TSF spec is valid */
valid_chanfreq : 1, /* if set, chanfreq is valid */
is_dsrc : 1, /* if set, MSDU is a DSRC frame */
guard_interval : 2, /* 0.4us, 0.8us, 1.6us, 3.2us */
encrypt_type : 2, /* 0 = NO_ENCRYPT,
1 = ENCRYPT,
2 ~ 3 - Reserved */
/* retry_limit -
* Specify the maximum number of transmissions, including the
* initial transmission, to attempt before giving up if no ack
* is received.
* If the tx rate is specified, then all retries shall use the
* same rate as the initial transmission.
* If no tx rate is specified, the target can choose whether to
* retain the original rate during the retransmissions, or to
* fall back to a more robust rate.
*/
retry_limit : 4,
use_dcm_11ax : 1, /* If set, Use Dual subcarrier modulation.
* Valid only for 11ax preamble types HE_SU
* and HE_EXT_SU
*/
ltf_subtype_11ax : 2, /* Takes enum values of htt_11ax_ltf_subtype_t
* Valid only for 11ax preamble types HE_SU
* and HE_EXT_SU
*/
dyn_bw : 1, /* 0 = static bw, 1 = dynamic bw */
bw_mask : 6, /* Valid only if dyn_bw == 0 (static bw).
* (Bit mask of 5, 10, 20, 40, 80, 160Mhz.
* Refer to HTT_TX_MSDU_EXT2_DESC_BW defs.)
*/
host_tx_desc_pool : 1; /* If set, Firmware allocates tx_descriptors
* in WAL_BUFFERID_TX_HOST_DATA_EXP,instead
* of WAL_BUFFERID_TX_TCL_DATA_EXP.
* Use cases:
* Any time firmware uses TQM-BYPASS for Data
* TID, firmware expect host to set this bit.
*/
/* DWORD 1: tx power, tx rate */
A_UINT32
power : 8, /* unit of the power field is 0.5 dbm
* similar to pwr field in htt_tx_msdu_desc_ext_t
* signed value ranging from -64dbm to 63.5 dbm
*/
mcs_mask : 12, /* mcs bit mask of 0 ~ 11
* Setting more than one MCS isn't currently
* supported by the target (but is supported
* in the interface in case in the future
* the target supports specifications of
* a limited set of MCS values.
*/
nss_mask : 8, /* Nss bit mask 0 ~ 7
* Setting more than one Nss isn't currently
* supported by the target (but is supported
* in the interface in case in the future
* the target supports specifications of
* a limited set of Nss values.
*/
pream_type : 3, /* Takes enum values of htt_tx_ext2_preamble_type_t */
update_peer_cache : 1; /* When set these custom values will be
* used for all packets, until the next
* update via this ext header.
* This is to make sure not all packets
* need to include this header.
*/
/* DWORD 2: tx chain mask, tx retries */
A_UINT32
/* chain_mask - specify which chains to transmit from */
chain_mask : 8,
key_flags : 8, /* Key Index and related flags - used in mesh mode
* TODO: Update Enum values for key_flags
*/
/*
* Channel frequency: This identifies the desired channel
* frequency (in MHz) for tx frames. This is used by FW to help
* determine when it is safe to transmit or drop frames for
* off-channel operation.
* The default value of zero indicates to FW that the corresponding
* VDEV's home channel (if there is one) is the desired channel
* frequency.
*/
chanfreq : 16;
/* DWORD 3: tx expiry time (TSF) LSBs */
A_UINT32 expire_tsf_lo;
/* DWORD 4: tx expiry time (TSF) MSBs */
A_UINT32 expire_tsf_hi;
/* DWORD 5: flags to control routing / processing of the MSDU */
A_UINT32
/* learning_frame
* When this flag is set, this frame will be dropped by FW
* rather than being enqueued to the Transmit Queue Manager (TQM) HW.
*/
learning_frame : 1,
/* send_as_standalone
* This will indicate if the msdu needs to be sent as a singleton PPDU,
* i.e. with no A-MSDU or A-MPDU aggregation.
* The scope is extended to other use-cases.
*/
send_as_standalone : 1,
/* is_host_opaque_valid
* Host should set this bit to 1 if the host_opaque_cookie is populated
* with valid information.
*/
is_host_opaque_valid : 1,
traffic_end_indication: 1,
rsvd0 : 28;
/* DWORD 6 : Host opaque cookie for special frames */
A_UINT32 host_opaque_cookie : 16, /* see is_host_opaque_valid */
rsvd1 : 16;
/* DWORD 7-8 : Rx buffer addr for qdata frames */
struct htt_h2t_rx_buffer_addr_info rx_buffer_addr;
/*
* This structure can be expanded further up to 32 bytes
* by adding further DWORDs as needed.
*/
} POSTPACK;
/* DWORD 0 */
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR_M 0x00000001
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR_S 0
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_M 0x00000002
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_S 1
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_M 0x00000004
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_S 2
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_M 0x00000008
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_S 3
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_M 0x00000010
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_S 4
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_M 0x00000020
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_S 5
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_M 0x00000040
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_S 6
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_M 0x00000080
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_S 7
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_M 0x00000100
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_S 8
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_M 0x00000200
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_S 9
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_M 0x00000400
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_S 10
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_M 0x00000800
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_S 11
#define HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_M 0x00001000
#define HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_S 12
#define HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_M 0x00006000
#define HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_S 13
#define HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_M 0x00018000
#define HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_S 15
#define HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_M 0x001e0000
#define HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_S 17
#define HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_M 0x00200000
#define HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_S 21
#define HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_M 0x00c00000
#define HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_S 22
#define HTT_TX_MSDU_EXT2_DESC_DYN_BW_M 0x01000000
#define HTT_TX_MSDU_EXT2_DESC_DYN_BW_S 24
#define HTT_TX_MSDU_EXT2_DESC_BW_MASK_M 0x7e000000
#define HTT_TX_MSDU_EXT2_DESC_BW_MASK_S 25
/* DWORD 1 */
#define HTT_TX_MSDU_EXT2_DESC_PWR_M 0x000000ff
#define HTT_TX_MSDU_EXT2_DESC_PWR_S 0
#define HTT_TX_MSDU_EXT2_DESC_MCS_MASK_M 0x000fff00
#define HTT_TX_MSDU_EXT2_DESC_MCS_MASK_S 8
#define HTT_TX_MSDU_EXT2_DESC_NSS_MASK_M 0x0ff00000
#define HTT_TX_MSDU_EXT2_DESC_NSS_MASK_S 20
#define HTT_TX_MSDU_EXT2_DESC_PREAM_TYPE_M 0x70000000
#define HTT_TX_MSDU_EXT2_DESC_PREAM_TYPE_S 28
#define HTT_TX_MSDU_EXT2_DESC_UPDATE_PEER_CACHE_M 0x80000000
#define HTT_TX_MSDU_EXT2_DESC_UPDATE_PEER_CACHE_S 31
/* DWORD 2 */
#define HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_M 0x000000ff
#define HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_S 0
#define HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_M 0x0000ff00
#define HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_S 8
#define HTT_TX_MSDU_EXT_DESC_CHANFREQ_M 0xffff0000
#define HTT_TX_MSDU_EXT_DESC_CHANFREQ_S 16
/* DWORD 5 */
#define HTT_TX_MSDU_EXT2_DESC_FLAG_LEARNING_FRAME_M 0x00000001
#define HTT_TX_MSDU_EXT2_DESC_FLAG_LEARNING_FRAME_S 0
#define HTT_TX_MSDU_EXT2_DESC_FLAG_SEND_AS_STANDALONE_M 0x00000002
#define HTT_TX_MSDU_EXT2_DESC_FLAG_SEND_AS_STANDALONE_S 1
#define HTT_TX_MSDU_EXT2_DESC_FLAG_HOST_OPAQUE_VALID_M 0x00000004
#define HTT_TX_MSDU_EXT2_DESC_FLAG_HOST_OPAQUE_VALID_S 2
/* DWORD 6 */
#define HTT_TX_MSDU_EXT2_DESC_HOST_OPAQUE_COOKIE_M 0x0000FFFF
#define HTT_TX_MSDU_EXT2_DESC_HOST_OPAQUE_COOKIE_S 0
/* DWORD 0 */
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT_DESC_FLAG_VALID_PWR_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PWR_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_MCS_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_NSS_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL( \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE, _val); \
((_var) |= ((_val) \
<< HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_PREAMBLE_TYPE_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_RETRIES_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_BW_INFO_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL( \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL, _val); \
((_var) |= ((_val) \
<< HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_GUARD_INTERVAL_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHAIN_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_ENCRYPT_TYPE_S));\
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_KEY_FLAGS_S));\
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_EXPIRE_TIME_S));\
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_VALID_CHANFREQ_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_IS_DSRC_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_M) >> \
HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_S)
#define HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_GUARD_INTERVAL_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_M) >> \
HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_S)
#define HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_ENCRYPT_TYPE_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_M) >> \
HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_S)
#define HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_RETRY_LIMIT_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_M) >> \
HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_S)
#define HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_USE_DCM_11AX_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_M) >> \
HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_S)
#define HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_LTF_SUBTYPE_11AX_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_BW_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_BW_MASK_M) >> \
HTT_TX_MSDU_EXT2_DESC_BW_MASK_S)
#define HTT_TX_MSDU_EXT2_DESC_BW_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_BW_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_BW_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_PARTIAL_BW_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_PARTIAL_BW_MASK_M) >> \
HTT_TX_MSDU_EXT2_DESC_PARTIAL_BW_MASK_S)
#define HTT_TX_MSDU_EXT2_DESC_PARTIAL_BW_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_PARTIAL_BW_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_PARTIAL_BW_MASK_S)); \
} while (0)
/* DWORD 1 */
#define HTT_TX_MSDU_EXT2_DESC_PWR_GET_BASE(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_PWR_M) >> \
HTT_TX_MSDU_EXT2_DESC_PWR_S)
#define HTT_TX_MSDU_EXT2_DESC_PWR_GET(_var) \
(HTT_TX_MSDU_EXT2_DESC_PWR_GET_BASE(_var) | \
HTT_SIGN_BIT_EXTENSION_MASK(_var, HTT_TX_MSDU_EXT2_DESC_PWR))
#define HTT_TX_MSDU_EXT2_DESC_PWR_SET(_var, _val) \
((_var) |= (((_val) << HTT_TX_MSDU_EXT2_DESC_PWR_S)) & \
HTT_TX_MSDU_EXT2_DESC_PWR_M)
#define HTT_TX_MSDU_EXT2_DESC_MCS_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_MCS_MASK_M) >> \
HTT_TX_MSDU_EXT2_DESC_MCS_MASK_S)
#define HTT_TX_MSDU_EXT2_DESC_MCS_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_MCS_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_MCS_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_NSS_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_NSS_MASK_M) >> \
HTT_TX_MSDU_EXT2_DESC_NSS_MASK_S)
#define HTT_TX_MSDU_EXT2_DESC_NSS_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_NSS_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_NSS_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_PREAMBLE_TYPE_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_PREAMBLE_TYPE_M) >> \
HTT_TX_MSDU_EXT2_DESC_PREAMBLE_TYPE_S)
#define HTT_TX_MSDU_EXT2_DESC_PREAMBLE_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_PREAMBLE_TYPE, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_PREAMBLE_TYPE_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_UPDATE_PEER_CACHE_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_UPDATE_PEER_CACHE_M) >> \
HTT_TX_MSDU_EXT2_UPDATE_PEER_CACHE_S)
#define HTT_TX_MSDU_EXT2_UPDATE_PEER_CACHE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_UPDATE_PEER_CACHE, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_UPDATE_PEER_CACHE_S)); \
} while (0)
/* DWORD 2 */
#define HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_M) >> \
HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_S)
#define HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_CHAIN_MASK_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_MASK_M) >> \
HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_S)
#define HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_KEY_FLAGS_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_CHANFREQ_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_CHANFREQ_MASK_M) >> \
HTT_TX_MSDU_EXT2_DESC_CHANFREQ_S)
#define HTT_TX_MSDU_EXT2_DESC_CHANFREQ_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_CHANFREQ, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_CHANFREQ_S)); \
} while (0)
/* DWORD 5 */
#define HTT_TX_MSDU_EXT2_DESC_FLAG_LEARNING_FRAME_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_LEARNING_FRAME_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_LEARNING_FRAME_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_LEARNING_FRAME_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_LEARNING_FRAME, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_LEARNING_FRAME_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_SEND_AS_STANDALONE_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_SEND_AS_STANDALONE_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_SEND_AS_STANDALONE_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_SEND_AS_STANDALONE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_SEND_AS_STANDALONE, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_SEND_AS_STANDALONE_S)); \
} while (0)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_HOST_OPAQUE_VALID_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_FLAG_HOST_OPAQUE_VALID_M) >> \
HTT_TX_MSDU_EXT2_DESC_FLAG_HOST_OPAQUE_VALID_S)
#define HTT_TX_MSDU_EXT2_DESC_FLAG_HOST_OPAQUE_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_FLAG_HOST_OPAQUE_VALID, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_FLAG_HOST_OPAQUE_VALID_S)); \
} while (0)
/* DWORD 6 */
#define HTT_TX_MSDU_EXT2_DESC_HOST_OPAQUE_COOKIE_GET(_var) \
(((_var) & HTT_TX_MSDU_EXT2_DESC_HOST_OPAQUE_COOKIE_M) >> \
HTT_TX_MSDU_EXT2_DESC_HOST_OPAQUE_COOKIE_S)
#define HTT_TX_MSDU_EXT2_DESC_HOST_OPAQUE_COOKIE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_EXT2_DESC_HOST_OPAQUE_COOKIE, _val); \
((_var) |= ((_val) << HTT_TX_MSDU_EXT2_DESC_HOST_OPAQUE_COOKIE_S)); \
} while (0)
/* DWORD 7 */
#define HTT_RX_BUFFER_ADDR_INFO_ADDR_31_0_M 0xFFFFFFFF
#define HTT_RX_BUFFER_ADDR_INFO_ADDR_31_0_S 0
#define HTT_RX_BUFFER_ADDR_INFO_ADDR_31_0_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_BUFFER_ADDR_INFO_ADDR_31_0, value); \
(word) |= (value) << HTT_RX_BUFFER_ADDR_INFO_ADDR_31_0_S; \
} while (0)
#define HTT_RX_BUFFER_ADDR_INFO_ADDR_31_0_GET(word) \
(((word) & HTT_RX_BUFFER_ADDR_INFO_ADDR_31_0_M) >> HTT_RX_BUFFER_ADDR_INFO_ADDR_31_0_S)
/* DWORD 8 */
#define HTT_RX_BUFFER_ADDR_INFO_ADDR_39_32_M 0x000000FF
#define HTT_RX_BUFFER_ADDR_INFO_ADDR_39_32_S 0
#define HTT_RX_BUFFER_ADDR_INFO_ADDR_39_32_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_BUFFER_ADDR_INFO_ADDR_39_32, value); \
(word) |= (value) << HTT_RX_BUFFER_ADDR_INFO_ADDR_39_32_S; \
} while (0)
#define HTT_RX_BUFFER_ADDR_INFO_ADDR_39_32_GET(word) \
(((word) & HTT_RX_BUFFER_ADDR_INFO_ADDR_39_32_M) >> HTT_RX_BUFFER_ADDR_INFO_ADDR_39_32_S)
#define HTT_RX_BUFFER_ADDR_INFO_RETURN_BUFFER_MANAGER_M 0x00000F00
#define HTT_RX_BUFFER_ADDR_INFO_RETURN_BUFFER_MANAGER_S 8
#define HTT_RX_BUFFER_ADDR_INFO_RETURN_BUFFER_MANAGER_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_BUFFER_ADDR_INFO_RETURN_BUFFER_MANAGER, value); \
(word) |= (value) << HTT_RX_BUFFER_ADDR_INFO_RETURN_BUFFER_MANAGER_S; \
} while (0)
#define HTT_RX_BUFFER_ADDR_INFO_RETURN_BUFFER_MANAGER_GET(word) \
(((word) & HTT_RX_BUFFER_ADDR_INFO_RETURN_BUFFER_MANAGER_M) >> HTT_RX_BUFFER_ADDR_INFO_RETURN_BUFFER_MANAGER_S)
#define HTT_RX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_M 0xFFFFF000
#define HTT_RX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_S 12
#define HTT_RX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE, value); \
(word) |= (value) << HTT_RX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_S; \
} while (0)
#define HTT_RX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_GET(word) \
(((word) & HTT_RX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_M) >> HTT_RX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_S)
typedef enum {
HTT_TCL_METADATA_TYPE_PEER_BASED = 0,
HTT_TCL_METADATA_TYPE_VDEV_BASED = 1,
} htt_tcl_metadata_type;
/**
* @brief HTT TCL command number format
* @details
* This structure is passed from host as tcl_data_cmd->tcl_cmd_number and
* available to firmware as tcl_exit_base->tcl_status_number.
* For regular / multicast packets host will send vdev and mac id and for
* NAWDS packets, host will send peer id.
* A_UINT32 is used to avoid endianness conversion problems.
* tcl_status_number size is 16 bits, hence only 16 bits can be used.
*/
typedef struct {
A_UINT32
type: 1, /* vdev_id based or peer_id based */
rsvd: 31;
} htt_tx_tcl_vdev_or_peer_t;
typedef struct {
A_UINT32
type: 1, /* vdev_id based or peer_id based */
valid_htt_ext: 1, /* If set, tcl_exit_base->host_meta_info is valid */
vdev_id: 8,
pdev_id: 2,
host_inspected:1,
opt_dp_ctrl: 1, /* 1 -> qdata consent pkt */
rsvd: 18;
} htt_tx_tcl_vdev_metadata;
typedef struct {
A_UINT32
type: 1, /* vdev_id based or peer_id based */
valid_htt_ext: 1, /* If set, tcl_exit_base->host_meta_info is valid */
peer_id: 14,
rsvd: 16;
} htt_tx_tcl_peer_metadata;
PREPACK struct htt_tx_tcl_metadata {
union {
htt_tx_tcl_vdev_or_peer_t vdev_or_peer;
htt_tx_tcl_vdev_metadata vdev_meta;
htt_tx_tcl_peer_metadata peer_meta;
};
} POSTPACK;
/* DWORD 0 */
#define HTT_TX_TCL_METADATA_TYPE_M 0x00000001
#define HTT_TX_TCL_METADATA_TYPE_S 0
#define HTT_TX_TCL_METADATA_VALID_HTT_M 0x00000002
#define HTT_TX_TCL_METADATA_VALID_HTT_S 1
/* VDEV metadata */
#define HTT_TX_TCL_METADATA_VDEV_ID_M 0x000003fc
#define HTT_TX_TCL_METADATA_VDEV_ID_S 2
#define HTT_TX_TCL_METADATA_PDEV_ID_M 0x00000c00
#define HTT_TX_TCL_METADATA_PDEV_ID_S 10
#define HTT_TX_TCL_METADATA_HOST_INSPECTED_M 0x00001000
#define HTT_TX_TCL_METADATA_HOST_INSPECTED_S 12
#define HTT_TX_TCL_METADATA_OPT_DP_CTRL_M 0x00002000
#define HTT_TX_TCL_METADATA_OPT_DP_CTRL_S 13
/* PEER metadata */
#define HTT_TX_TCL_METADATA_PEER_ID_M 0x0000fffc
#define HTT_TX_TCL_METADATA_PEER_ID_S 2
#define HTT_TX_TCL_METADATA_TYPE_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_TYPE_M) >> \
HTT_TX_TCL_METADATA_TYPE_S)
#define HTT_TX_TCL_METADATA_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_TYPE, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_TYPE_S)); \
} while (0)
#define HTT_TX_TCL_METADATA_VALID_HTT_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_VALID_HTT_M) >> \
HTT_TX_TCL_METADATA_VALID_HTT_S)
#define HTT_TX_TCL_METADATA_VALID_HTT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_VALID_HTT, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_VALID_HTT_S)); \
} while (0)
#define HTT_TX_TCL_METADATA_VDEV_ID_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_VDEV_ID_M) >> \
HTT_TX_TCL_METADATA_VDEV_ID_S)
#define HTT_TX_TCL_METADATA_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_VDEV_ID_S)); \
} while (0)
#define HTT_TX_TCL_METADATA_PDEV_ID_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_PDEV_ID_M) >> \
HTT_TX_TCL_METADATA_PDEV_ID_S)
#define HTT_TX_TCL_METADATA_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_PDEV_ID_S)); \
} while (0)
#define HTT_TX_TCL_METADATA_HOST_INSPECTED_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_HOST_INSPECTED_M) >> \
HTT_TX_TCL_METADATA_HOST_INSPECTED_S)
#define HTT_TX_TCL_METADATA_HOST_INSPECTED_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_HOST_INSPECTED, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_HOST_INSPECTED_S)); \
} while (0)
#define HTT_TX_TCL_METADATA_PEER_ID_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_PEER_ID_M) >> \
HTT_TX_TCL_METADATA_PEER_ID_S)
#define HTT_TX_TCL_METADATA_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_PEER_ID, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_PEER_ID_S)); \
} while (0)
#define HTT_TX_TCL_METADATA_OPT_DP_CTRL_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_OPT_DP_CTRL_M) >> \
HTT_TX_TCL_METADATA_OPT_DP_CTRL_S)
#define HTT_TX_TCL_METADATA_OPT_DP_CTRL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_OPT_DP_CTRL, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_OPT_DP_CTRL_S)); \
} while (0)
/*------------------------------------------------------------------
* V2 Version of TCL Data Command
* V2 Version to support peer_id, vdev_id, svc_class_id and
* MLO global_seq all flavours of TCL Data Cmd.
*-----------------------------------------------------------------*/
typedef enum {
HTT_TCL_METADATA_V2_TYPE_PEER_BASED = 0,
HTT_TCL_METADATA_V2_TYPE_VDEV_BASED = 1,
HTT_TCL_METADATA_V2_TYPE_SVC_ID_BASED = 2,
HTT_TCL_METADATA_V2_TYPE_GLOBAL_SEQ_BASED = 3,
} htt_tcl_metadata_type_v2;
/**
* @brief HTT TCL command number format
* @details
* This structure is passed from host as tcl_data_cmd->tcl_cmd_number and
* available to firmware as tcl_exit_base->tcl_status_number.
* A_UINT32 is used to avoid endianness conversion problems.
* tcl_status_number size is 16 bits, hence only 16 bits can be used.
*/
typedef struct {
A_UINT32
type: 2, /* vdev_id based or peer_id or svc_id or global seq based */
valid_htt_ext: 1, /* If set, tcl_exit_base->host_meta_info is valid */
vdev_id: 8,
pdev_id: 2,
host_inspected:1,
rsvd: 2,
padding: 16; /* These 16 bits cannot be used by FW for the tcl command */
} htt_tx_tcl_vdev_metadata_v2;
typedef struct {
A_UINT32
type: 2, /* vdev_id based or peer_id or svc_id or global seq based */
valid_htt_ext: 1, /* If set, tcl_exit_base->host_meta_info is valid */
peer_id: 13,
padding: 16; /* These 16 bits cannot be used by FW for the tcl command */
} htt_tx_tcl_peer_metadata_v2;
typedef struct {
A_UINT32
type: 2, /* vdev_id based or peer_id or svc_id or global seq based */
valid_htt_ext: 1, /* If set, tcl_exit_base->host_meta_info is valid */
svc_class_id: 8,
ast_index: 3, /* Indicates to firmware the AST index to be used for Pine for AST Override */
rsvd: 2,
padding: 16; /* These 16 bits cannot be used by FW for the tcl command */
} htt_tx_tcl_svc_class_id_metadata;
typedef struct {
A_UINT32
type: 2, /* vdev_id based or peer_id or svc_id or global seq based */
host_inspected: 1,
global_seq_no: 12,
htt_ext_present:1,
padding: 16; /* These 16 bits cannot be used by FW for the tcl command */
} htt_tx_tcl_global_seq_metadata;
PREPACK struct htt_tx_tcl_metadata_v2 {
union {
htt_tx_tcl_vdev_metadata_v2 vdev_meta_v2;
htt_tx_tcl_peer_metadata_v2 peer_meta_v2;
htt_tx_tcl_svc_class_id_metadata svc_class_id_meta;
htt_tx_tcl_global_seq_metadata global_seq_meta;
};
} POSTPACK;
/* DWORD 0 */
#define HTT_TX_TCL_METADATA_TYPE_V2_M 0x00000003
#define HTT_TX_TCL_METADATA_TYPE_V2_S 0
/* Valid htt ext for V2 tcl data cmd used by VDEV, PEER and SVC_ID meta */
#define HTT_TX_TCL_METADATA_V2_VALID_HTT_EXT_ID_M 0x00000004
#define HTT_TX_TCL_METADATA_V2_VALID_HTT_EXT_ID_S 2
/* VDEV V2 metadata */
#define HTT_TX_TCL_METADATA_V2_VDEV_ID_M 0x000007f8
#define HTT_TX_TCL_METADATA_V2_VDEV_ID_S 3
#define HTT_TX_TCL_METADATA_V2_PDEV_ID_M 0x00001800
#define HTT_TX_TCL_METADATA_V2_PDEV_ID_S 11
#define HTT_TX_TCL_METADATA_V2_HOST_INSPECTED_M 0x00002000
#define HTT_TX_TCL_METADATA_V2_HOST_INSPECTED_S 13
/* PEER V2 metadata */
#define HTT_TX_TCL_METADATA_V2_PEER_ID_M 0x0000fff8
#define HTT_TX_TCL_METADATA_V2_PEER_ID_S 3
/* SVC_CLASS_ID metadata */
#define HTT_TX_TCL_METADATA_SVC_CLASS_ID_M 0x000007f8
#define HTT_TX_TCL_METADATA_SVC_CLASS_ID_S 3
/* Global Seq no metadata */
#define HTT_TX_TCL_METADATA_GLBL_SEQ_HOST_INSPECTED_M 0x00000004
#define HTT_TX_TCL_METADATA_GLBL_SEQ_HOST_INSPECTED_S 2
#define HTT_TX_TCL_METADATA_GLBL_SEQ_NO_M 0x00007ff8
#define HTT_TX_TCL_METADATA_GLBL_SEQ_NO_S 3
/* HTT ext present flag:
* Specify whether there is a htt ext desc present for this packet,
* accompanying the global seq no metadata.
*/
#define HTT_TX_TCL_METADATA_GLBL_SEQ_HTT_EXT_PRESENT_M 0x00008000
#define HTT_TX_TCL_METADATA_GLBL_SEQ_HTT_EXT_PRESENT_S 15
/*----- Get and Set V2 type field in Vdev, Peer, Svc_Class_Id, Global_seq_no */
#define HTT_TX_TCL_METADATA_TYPE_V2_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_TYPE_V2_M) >> \
HTT_TX_TCL_METADATA_TYPE_V2_S)
#define HTT_TX_TCL_METADATA_TYPE_V2_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_TYPE_V2, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_TYPE_V2_S)); \
} while (0)
#define HTT_TX_TCL_METADATA_V2_VALID_HTT_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_V2_VALID_HTT_EXT_ID_M) >> \
HTT_TX_TCL_METADATA_V2_VALID_HTT_EXT_ID_S)
#define HTT_TX_TCL_METADATA_V2_VALID_HTT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_V2_VALID_HTT_EXT_ID, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_V2_VALID_HTT_EXT_ID_S)); \
} while (0)
/*----- Get and Set V2 type field in Vdev meta fields ----*/
#define HTT_TX_TCL_METADATA_V2_VDEV_ID_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_V2_VDEV_ID_M) >> \
HTT_TX_TCL_METADATA_V2_VDEV_ID_S)
#define HTT_TX_TCL_METADATA_V2_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_V2_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_V2_VDEV_ID_S)); \
} while (0)
#define HTT_TX_TCL_METADATA_V2_PDEV_ID_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_V2_PDEV_ID_M) >> \
HTT_TX_TCL_METADATA_V2_PDEV_ID_S)
#define HTT_TX_TCL_METADATA_V2_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_V2_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_V2_PDEV_ID_S)); \
} while (0)
#define HTT_TX_TCL_METADATA_V2_HOST_INSPECTED_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_V2_HOST_INSPECTED_M) >> \
HTT_TX_TCL_METADATA_V2_HOST_INSPECTED_S)
#define HTT_TX_TCL_METADATA_V2_HOST_INSPECTED_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_V2_HOST_INSPECTED, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_V2_HOST_INSPECTED_S)); \
} while (0)
/*----- Get and Set V2 type field in Peer meta fields ----*/
#define HTT_TX_TCL_METADATA_V2_PEER_ID_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_V2_PEER_ID_M) >> \
HTT_TX_TCL_METADATA_V2_PEER_ID_S)
#define HTT_TX_TCL_METADATA_V2_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_V2_PEER_ID, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_V2_PEER_ID_S)); \
} while (0)
/*----- Get and Set V2 type field in Service Class fields ----*/
#define HTT_TX_TCL_METADATA_SVC_CLASS_ID_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_SVC_CLASS_ID_M) >> \
HTT_TX_TCL_METADATA_SVC_CLASS_ID_S)
#define HTT_TX_TCL_METADATA_SVC_CLASS_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_SVC_CLASS_ID, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_SVC_CLASS_ID_S)); \
} while (0)
/*----- Get and Set V2 type field in Global sequence fields ----*/
#define HTT_TX_TCL_METADATA_GLBL_SEQ_HOST_INSPECTED_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_GLBL_SEQ_HOST_INSPECTED_M) >> \
HTT_TX_TCL_METADATA_GLBL_SEQ_HOST_INSPECTED_S)
#define HTT_TX_TCL_METADATA_GLBL_SEQ_HOST_INSPECTED_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_GLBL_SEQ_HOST_INSPECTED, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_GLBL_SEQ_HOST_INSPECTED_S)); \
} while (0)
#define HTT_TX_TCL_METADATA_GLBL_SEQ_NO_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_GLBL_SEQ_NO_M) >> \
HTT_TX_TCL_METADATA_GLBL_SEQ_NO_S)
#define HTT_TX_TCL_METADATA_GLBL_SEQ_NO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_GLBL_SEQ_NO, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_GLBL_SEQ_NO_S)); \
} while (0)
#define HTT_TX_TCL_METADATA_GLBL_SEQ_HTT_EXT_PRESENT_GET(_var) \
(((_var) & HTT_TX_TCL_METADATA_GLBL_SEQ_HTT_EXT_PRESENT_M) >> \
HTT_TX_TCL_METADATA_GLBL_SEQ_HTT_EXT_PRESENT_S)
#define HTT_TX_TCL_METADATA_GLBL_SEQ_HTT_EXT_PRESENT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_TCL_METADATA_GLBL_SEQ_HTT_EXT_PRESENT, _val); \
((_var) |= ((_val) << HTT_TX_TCL_METADATA_GLBL_SEQ_HTT_EXT_PRESENT_S)); \
} while (0)
/*------------------------------------------------------------------
* End V2 Version of TCL Data Command
*-----------------------------------------------------------------*/
typedef enum {
HTT_TX_FW2WBM_TX_STATUS_OK,
HTT_TX_FW2WBM_TX_STATUS_DROP,
HTT_TX_FW2WBM_TX_STATUS_TTL,
HTT_TX_FW2WBM_TX_STATUS_REINJECT,
HTT_TX_FW2WBM_TX_STATUS_INSPECT,
HTT_TX_FW2WBM_TX_STATUS_MEC_NOTIFY,
HTT_TX_FW2WBM_TX_STATUS_VDEVID_MISMATCH,
HTT_TX_FW2WBM_TX_STATUS_MAX
} htt_tx_fw2wbm_tx_status_t;
typedef enum {
HTT_TX_FW2WBM_REINJECT_REASON_EAPOL_ENCAP_EXP, /* deprecated */
HTT_TX_FW2WBM_REINJECT_REASON_RAW_ENCAP_EXP /* current */ =
HTT_TX_FW2WBM_REINJECT_REASON_EAPOL_ENCAP_EXP,
HTT_TX_FW2WBM_REINJECT_REASON_INJECT_VIA_EXP,
HTT_TX_FW2WBM_REINJECT_REASON_MCAST,
HTT_TX_FW2WBM_REINJECT_REASON_ARP,
HTT_TX_FW2WBM_REINJECT_REASON_DHCP,
HTT_TX_FW2WBM_REINJECT_REASON_FLOW_CONTROL,
HTT_TX_FW2WBM_REINJECT_REASON_MLO_MCAST,
HTT_TX_FW2WBM_REINJECT_REASON_SAWF_SVC_CLASS_ID_ABSENT,
HTT_TX_FW2WBM_REINJECT_REASON_OPT_DP_CTRL, /* tx qdata packet */
HTT_TX_FW2WBM_REINJECT_REASON_MAX,
} htt_tx_fw2wbm_reinject_reason_t;
/**
* @brief HTT TX WBM Completion from firmware to host
* @details
* This structure is passed from firmware to host overlaid on wbm_release_ring
* DWORD 3 and 4 for software based completions (Exception frames and
* TQM bypass frames)
* For software based completions, wbm_release_ring->release_source_module will
* be set to release_source_fw
*/
PREPACK struct htt_tx_wbm_completion {
A_UINT32
sch_cmd_id: 24,
exception_frame: 1, /* If set, this packet was queued via exception path */
rsvd0_31_25: 7;
A_UINT32
ack_frame_rssi: 8, /* If this frame is removed as the result of the
* reception of an ACK or BA, this field indicates
* the RSSI of the received ACK or BA frame.
* When the frame is removed as result of a direct
* remove command from the SW, this field is set
* to 0x0 (which is never a valid value when real
* RSSI is available).
* Units: dB w.r.t noise floor
*/
tx_status: 4, /* Takes enum values of htt_tx_fw2wbm_tx_status_t */
reinject_reason: 4, /* Takes enum values of htt_tx_fw2wbm_reinject_reason_t */
rsvd1_31_16: 16;
} POSTPACK;
/* DWORD 0 */
#define HTT_TX_WBM_COMPLETION_SCH_CMD_ID_M 0x00ffffff
#define HTT_TX_WBM_COMPLETION_SCH_CMD_ID_S 0
#define HTT_TX_WBM_COMPLETION_EXP_FRAME_M 0x01000000
#define HTT_TX_WBM_COMPLETION_EXP_FRAME_S 24
/* DWORD 1 */
#define HTT_TX_WBM_COMPLETION_ACK_RSSI_M 0x000000ff
#define HTT_TX_WBM_COMPLETION_ACK_RSSI_S 0
#define HTT_TX_WBM_COMPLETION_TX_STATUS_M 0x00000f00
#define HTT_TX_WBM_COMPLETION_TX_STATUS_S 8
#define HTT_TX_WBM_COMPLETION_REINJECT_REASON_M 0x0000f000
#define HTT_TX_WBM_COMPLETION_REINJECT_REASON_S 12
/* DWORD 0 */
#define HTT_TX_WBM_COMPLETION_SCH_CMD_ID_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_SCH_CMD_ID_M) >> \
HTT_TX_WBM_COMPLETION_SCH_CMD_ID_S)
#define HTT_TX_WBM_COMPLETION_SCH_CMD_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_SCH_CMD_ID, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_SCH_CMD_ID_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_EXP_FRAME_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_EXP_FRAME_M) >> \
HTT_TX_WBM_COMPLETION_EXP_FRAME_S)
#define HTT_TX_WBM_COMPLETION_EXP_FRAME_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_EXP_FRAME, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_EXP_FRAME_S)); \
} while (0)
/* DWORD 1 */
#define HTT_TX_WBM_COMPLETION_ACK_RSSI_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_ACK_RSSI_M) >> \
HTT_TX_WBM_COMPLETION_ACK_RSSI_S)
#define HTT_TX_WBM_COMPLETION_ACK_RSSI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_ACK_RSSI, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_ACK_RSSI_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_TX_STATUS_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_TX_STATUS_M) >> \
HTT_TX_WBM_COMPLETION_TX_STATUS_S)
#define HTT_TX_WBM_COMPLETION_TX_STATUS_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_TX_STATUS, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_TX_STATUS_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_REINJECT_REASON_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_REINJECT_REASON_M) >> \
HTT_TX_WBM_COMPLETION_REINJECT_REASON_S)
#define HTT_TX_WBM_COMPLETION_REINJECT_REASON_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_REINJECT_REASON, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_REINJECT_REASON_S)); \
} while (0)
/**
* @brief HTT TX WBM Completion from firmware to host
* @details
* This structure applies only to WLAN chips that contain WLAN Buffer Mgmt
* (WBM) offload HW.
* This structure is passed from firmware to host overlaid on wbm_release_ring
* For software based completions, release_source_module will
* be set to WIFIRELEASE_SOURCE_FW_E. Host SW is expected to inspect using
* struct wbm_release_ring and then switch to this after looking at
* release_source_module.
*/
PREPACK struct htt_tx_wbm_completion_v2 {
A_UINT32
used_by_hw0; /* Refer to struct wbm_release_ring */
A_UINT32
used_by_hw1; /* Refer to struct wbm_release_ring */
A_UINT32
used_by_hw2: 9, /* Refer to struct wbm_release_ring */
tx_status: 4, /* Takes enum values of htt_tx_fw2wbm_tx_status_t */
reinject_reason: 4, /* Takes enum values of htt_tx_fw2wbm_reinject_reason_t */
exception_frame: 1,
transmit_count: 7, /* Refer to struct wbm_release_ring */
rsvd0: 5, /* For future use */
used_by_hw4: 1, /* wbm_internal_error bit being used by HW */
rsvd1: 1; /* For future use */
A_UINT32
data0: 32; /* data0,1 and 2 changes based on tx_status type
* if HTT_TX_FW2WBM_TX_STATUS_OK or HTT_TX_FW2WBM_TX_STATUS_DROP
* or HTT_TX_FW2WBM_TX_STATUS_TTL, struct htt_tx_wbm_transmit_status will be used.
* if HTT_TX_FW2WBM_TX_STATUS_REINJECT, struct htt_tx_wbm_reinject_status will be used.
* if HTT_TX_FW2WBM_TX_STATUS_MEC_NOTIFY, struct htt_tx_wbm_mec_addr_notify will be used.
*/
A_UINT32
data1: 32;
A_UINT32
data2: 32;
A_UINT32
used_by_hw3; /* Refer to struct wbm_release_ring */
} POSTPACK;
/* DWORD 1, 2 and part of 3 are accessed via HW header files */
/* DWORD 3 */
#define HTT_TX_WBM_COMPLETION_V2_TX_STATUS_M 0x00001e00
#define HTT_TX_WBM_COMPLETION_V2_TX_STATUS_S 9
#define HTT_TX_WBM_COMPLETION_V2_REINJECT_REASON_M 0x0001e000
#define HTT_TX_WBM_COMPLETION_V2_REINJECT_REASON_S 13
#define HTT_TX_WBM_COMPLETION_V2_EXP_FRAME_M 0x00020000
#define HTT_TX_WBM_COMPLETION_V2_EXP_FRAME_S 17
#define HTT_TX_WBM_COMPLETION_V2_TRANSMIT_COUNT_M 0x01FC0000
#define HTT_TX_WBM_COMPLETION_V2_TRANSMIT_COUNT_S 18
/* DWORD 3 */
#define HTT_TX_WBM_COMPLETION_V2_TX_STATUS_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_TX_STATUS_M) >> \
HTT_TX_WBM_COMPLETION_V2_TX_STATUS_S)
#define HTT_TX_WBM_COMPLETION_V2_TX_STATUS_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_TX_STATUS, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_TX_STATUS_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V2_REINJECT_REASON_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_REINJECT_REASON_M) >> \
HTT_TX_WBM_COMPLETION_V2_REINJECT_REASON_S)
#define HTT_TX_WBM_COMPLETION_V2_REINJECT_REASON_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_REINJECT_REASON, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_REINJECT_REASON_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V2_EXP_FRAME_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_EXP_FRAME_M) >> \
HTT_TX_WBM_COMPLETION_V2_EXP_FRAME_S)
#define HTT_TX_WBM_COMPLETION_V2_EXP_FRAME_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_EXP_FRAME, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_EXP_FRAME_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V2_TRANSMIT_COUNT_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_TRANSMIT_COUNT_M) >> \
HTT_TX_WBM_COMPLETION_V2_TRANSMIT_COUNT_S)
#define HTT_TX_WBM_COMPLETION_V2_TRANSMIT_COUNT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_TRANSMIT_COUNT, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_TRANSMIT_COUNT_S)); \
} while (0)
/**
* @brief HTT TX WBM Completion from firmware to host (V3)
* @details
* This structure applies only to WLAN chips that contain WLAN Buffer Mgmt
* (WBM) offload HW.
* This structure is passed from firmware to host overlaid on wbm_release_ring
* For software based completions, release_source_module will
* be set to WIFIRELEASE_SOURCE_FW_E. Host SW is expected to inspect using
* struct wbm_release_ring and then switch to this after looking at
* release_source_module.
* Due to overlap with WBM block, htt_tx_wbm_completion_v3 will be used
* by new generations of targets.
*/
PREPACK struct htt_tx_wbm_completion_v3 {
A_UINT32
used_by_hw0; /* Refer to struct wbm_release_ring */
A_UINT32
used_by_hw1; /* Refer to struct wbm_release_ring */
A_UINT32
used_by_hw2: 13, /* Refer to struct wbm_release_ring */
tx_status: 4, /* Takes enum values of htt_tx_fw2wbm_tx_status_t */
used_by_hw3: 15;
A_UINT32
reinject_reason: 4, /* Takes enum values of htt_tx_fw2wbm_reinject_reason_t */
exception_frame: 1,
transmit_count: 7, /* Refer to struct wbm_release_ring */
rsvd0: 20; /* For future use */
A_UINT32
data0: 32; /* data0,1 and 2 changes based on tx_status type
* if HTT_TX_FW2WBM_TX_STATUS_OK or HTT_TX_FW2WBM_TX_STATUS_DROP
* or HTT_TX_FW2WBM_TX_STATUS_TTL, struct htt_tx_wbm_transmit_status will be used.
* if HTT_TX_FW2WBM_TX_STATUS_REINJECT, struct htt_tx_wbm_reinject_status will be used.
* if HTT_TX_FW2WBM_TX_STATUS_MEC_NOTIFY, struct htt_tx_wbm_mec_addr_notify will be used.
*/
A_UINT32
data1: 32;
A_UINT32
data2: 32;
A_UINT32
rsvd1: 20,
used_by_hw4: 12; /* Refer to struct wbm_release_ring */
} POSTPACK;
/* DWORD 3 */
#define HTT_TX_WBM_COMPLETION_V3_TX_STATUS_M 0x0001E000
#define HTT_TX_WBM_COMPLETION_V3_TX_STATUS_S 13
/* DWORD 4 */
#define HTT_TX_WBM_COMPLETION_V3_REINJECT_REASON_M 0x0000000F
#define HTT_TX_WBM_COMPLETION_V3_REINJECT_REASON_S 0
#define HTT_TX_WBM_COMPLETION_V3_EXP_FRAME_M 0x00000010
#define HTT_TX_WBM_COMPLETION_V3_EXP_FRAME_S 4
#define HTT_TX_WBM_COMPLETION_V3_TRANSMIT_COUNT_M 0x00000FE0
#define HTT_TX_WBM_COMPLETION_V3_TRANSMIT_COUNT_S 5
#define HTT_TX_WBM_COMPLETION_V3_TX_STATUS_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V3_TX_STATUS_M) >> \
HTT_TX_WBM_COMPLETION_V3_TX_STATUS_S)
#define HTT_TX_WBM_COMPLETION_V3_TX_STATUS_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V3_TX_STATUS, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V3_TX_STATUS_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V3_REINJECT_REASON_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V3_REINJECT_REASON_M) >> \
HTT_TX_WBM_COMPLETION_V3_REINJECT_REASON_S)
#define HTT_TX_WBM_COMPLETION_V3_REINJECT_REASON_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V3_REINJECT_REASON, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V3_REINJECT_REASON_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V3_EXP_FRAME_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V3_EXP_FRAME_M) >> \
HTT_TX_WBM_COMPLETION_V3_EXP_FRAME_S)
#define HTT_TX_WBM_COMPLETION_V3_EXP_FRAME_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V3_EXP_FRAME, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V3_EXP_FRAME_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V3_TRANSMIT_COUNT_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V3_TRANSMIT_COUNT_M) >> \
HTT_TX_WBM_COMPLETION_V3_TRANSMIT_COUNT_S)
#define HTT_TX_WBM_COMPLETION_V3_TRANSMIT_COUNT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V3_TRANSMIT_COUNT, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V3_TRANSMIT_COUNT_S)); \
} while (0)
typedef enum {
TX_FRAME_TYPE_UNDEFINED = 0,
TX_FRAME_TYPE_EAPOL = 1,
} htt_tx_wbm_status_frame_type;
/**
* @brief HTT TX WBM transmit status from firmware to host
* @details
* This structure applies only to WLAN chips that contain WLAN Buffer Mgmt
* (WBM) offload HW.
* This structure is passed from firmware to host overlaid on wbm_release_ring.
* used only if tx_status is HTT_TX_FW2WBM_TX_STATUS_OK or HTT_TX_FW2WBM_TX_STATUS_DROP
* or HTT_TX_FW2WBM_TX_STATUS_TTL
*/
PREPACK struct htt_tx_wbm_transmit_status {
A_UINT32
sch_cmd_id: 24,
ack_frame_rssi: 8; /* If this frame is removed as the result of the
* reception of an ACK or BA, this field indicates
* the RSSI of the received ACK or BA frame.
* When the frame is removed as result of a direct
* remove command from the SW, this field is set
* to 0x0 (which is never a valid value when real
* RSSI is available).
* Units: dB w.r.t noise floor
*/
A_UINT32
sw_peer_id: 16,
tid_num: 5,
valid: 1, /* If this "valid" flag is set, the sw_peer_id
* and tid_num fields contain valid data.
* If this "valid" flag is not set, the
* sw_peer_id and tid_num fields must be ignored.
*/
mcast: 1,
mcast_valid: 1, /* If this "mcast_valid" is set, the mcast field
* contains valid data.
*/
frame_type: 4, /* holds htt_tx_wbm_status_frame_type value */
transmit_count_valid: 1, /* If this "transmit_count_valid" is set, the
* transmit_count field in struct
* htt_tx_wbm_completion_vx has valid data.
*/
reserved: 3;
A_UINT32
ppdu_start_tsf: 32; /* PPDU Start timestamp added for multicast
* packets in the wbm completion path
*/
} POSTPACK;
/* DWORD 4 */
#define HTT_TX_WBM_COMPLETION_V2_SCH_CMD_ID_M 0x00ffffff
#define HTT_TX_WBM_COMPLETION_V2_SCH_CMD_ID_S 0
#define HTT_TX_WBM_COMPLETION_V2_ACK_FRAME_RSSI_M 0xff000000
#define HTT_TX_WBM_COMPLETION_V2_ACK_FRAME_RSSI_S 24
/* DWORD 5 */
#define HTT_TX_WBM_COMPLETION_V2_SW_PEER_ID_M 0x0000ffff
#define HTT_TX_WBM_COMPLETION_V2_SW_PEER_ID_S 0
#define HTT_TX_WBM_COMPLETION_V2_TID_NUM_M 0x001f0000
#define HTT_TX_WBM_COMPLETION_V2_TID_NUM_S 16
#define HTT_TX_WBM_COMPLETION_V2_VALID_M 0x00200000
#define HTT_TX_WBM_COMPLETION_V2_VALID_S 21
#define HTT_TX_WBM_COMPLETION_V2_MCAST_M 0x00400000
#define HTT_TX_WBM_COMPLETION_V2_MCAST_S 22
#define HTT_TX_WBM_COMPLETION_V2_MCAST_VALID_M 0x00800000
#define HTT_TX_WBM_COMPLETION_V2_MCAST_VALID_S 23
#define HTT_TX_WBM_COMPLETION_V2_FRAME_TYPE_M 0x0F000000
#define HTT_TX_WBM_COMPLETION_V2_FRAME_TYPE_S 24
#define HTT_TX_WBM_COMPLETION_V2_TRANSMIT_CNT_VALID_M 0x10000000
#define HTT_TX_WBM_COMPLETION_V2_TRANSMIT_CNT_VALID_S 28
/* DWORD 4 */
#define HTT_TX_WBM_COMPLETION_V2_SCH_CMD_ID_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_SCH_CMD_ID_M) >> \
HTT_TX_WBM_COMPLETION_V2_SCH_CMD_ID_S)
#define HTT_TX_WBM_COMPLETION_V2_SCH_CMD_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_SCH_CMD_ID, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_SCH_CMD_ID_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V2_ACK_FRAME_RSSI_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_ACK_FRAME_RSSI_M) >> \
HTT_TX_WBM_COMPLETION_V2_ACK_FRAME_RSSI_S)
#define HTT_TX_WBM_COMPLETION_V2_ACK_FRAME_RSSI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_ACK_FRAME_RSSI, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_ACK_FRAME_RSSI_S)); \
} while (0)
/* DWORD 5 */
#define HTT_TX_WBM_COMPLETION_V2_SW_PEER_ID_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_SW_PEER_ID_M) >> \
HTT_TX_WBM_COMPLETION_V2_SW_PEER_ID_S)
#define HTT_TX_WBM_COMPLETION_V2_SW_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_SW_PEER_ID, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_SW_PEER_ID_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V2_TID_NUM_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_TID_NUM_M) >> \
HTT_TX_WBM_COMPLETION_V2_TID_NUM_S)
#define HTT_TX_WBM_COMPLETION_V2_TID_NUM_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_TID_NUM, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_TID_NUM_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V2_VALID_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_VALID_M) >> \
HTT_TX_WBM_COMPLETION_V2_VALID_S)
#define HTT_TX_WBM_COMPLETION_V2_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_VALID, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_VALID_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V2_MCAST_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_MCAST_M) >> \
HTT_TX_WBM_COMPLETION_V2_MCAST_S)
#define HTT_TX_WBM_COMPLETION_V2_MCAST_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_MCAST, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_MCAST_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V2_MCAST_VALID_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_MCAST_VALID_M) >> \
HTT_TX_WBM_COMPLETION_V2_MCAST_VALID_S)
#define HTT_TX_WBM_COMPLETION_V2_MCAST_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_MCAST_VALID, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_MCAST_VALID_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V2_FRAME_TYPE_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_FRAME_TYPE_M) >> \
HTT_TX_WBM_COMPLETION_V2_FRAME_TYPE_S)
#define HTT_TX_WBM_COMPLETION_V2_FRAME_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_FRAME_TYPE, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_FRAME_TYPE_S)); \
#define HTT_TX_WBM_COMPLETION_V2_TRANSMIT_CNT_VALID_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_TRANSMIT_CNT_VALID_M) >> \
HTT_TX_WBM_COMPLETION_V2_TRANSMIT_CNT_VALID_S)
#define HTT_TX_WBM_COMPLETION_V2_TRANSMIT_CNT_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_MCAST_VALID, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_TRANSMIT_CNT_VALID_S)); \
} while (0)
/**
* @brief HTT TX WBM reinject status from firmware to host
* @details
* This structure applies only to WLAN chips that contain WLAN Buffer Mgmt
* (WBM) offload HW.
* This structure is passed from firmware to host overlaid on wbm_release_ring.
* used only if tx_status is HTT_TX_FW2WBM_TX_STATUS_REINJECT.
*/
PREPACK struct htt_tx_wbm_reinject_status {
A_UINT32
sw_peer_id : 16,
data_length : 16;
A_UINT32
tid : 5,
msduq_idx : 4,
reserved1 : 23;
A_UINT32
reserved2: 32;
} POSTPACK;
#define HTT_TX_WBM_REINJECT_SW_PEER_ID_M 0x0000ffff
#define HTT_TX_WBM_REINJECT_SW_PEER_ID_S 0
#define HTT_TX_WBM_REINJECT_DATA_LEN_M 0xffff0000
#define HTT_TX_WBM_REINJECT_DATA_LEN_S 16
#define HTT_TX_WBM_REINJECT_TID_M 0x0000001f
#define HTT_TX_WBM_REINJECT_TID_S 0
#define HTT_TX_WBM_REINJECT_MSDUQ_ID_M 0x000001e0
#define HTT_TX_WBM_REINJECT_MSDUQ_ID_S 5
#define HTT_TX_WBM_REINJECT_SW_PEER_ID_GET(_var)\
(((_var) & HTT_TX_WBM_REINJECT_SW_PEER_ID_M) >>\
HTT_TX_WBM_REINJECT_SW_PEER_ID_S)\
#define HTT_TX_WBM_REINJECT_SW_PEER_ID_SET(_var, _val)\
do {\
HTT_CHECK_SET_VAL(HTT_TX_WBM_REINJECT_SW_PEER_ID, _val); \
((_var) |= ((_val) << HTT_TX_WBM_REINJECT_SW_PEER_ID_S));\
} while(0)
#define HTT_TX_WBM_REINJECT_DATA_LEN_GET(_var)\
(((_var) & HTT_TX_WBM_REINJECT_DATA_LEN_M) >>\
HTT_TX_WBM_REINJECT_DATA_LEN_S)\
#define HTT_TX_WBM_REINJECT_DATA_LEN_SET(_var, _val)\
do {\
HTT_CHECK_SET_VAL(HTT_TX_WBM_REINJECT_DATA_LEN, _val); \
((_var) |= ((_val) << HTT_TX_WBM_REINJECT_DATA_LEN_S));\
} while(0)
#define HTT_TX_WBM_REINJECT_TID_GET(_var)\
(((_var) & HTT_TX_WBM_REINJECT_TID_M) >>\
HTT_TX_WBM_REINJECT_TID_S)\
#define HTT_TX_WBM_REINJECT_TID_SET(_var, _val)\
do {\
HTT_CHECK_SET_VAL(HTT_TX_WBM_REINJECT_TID, _val); \
((_var) |= ((_val) << HTT_TX_WBM_REINJECT_TID_S));\
} while(0)
#define HTT_TX_WBM_REINJECT_MSDUQ_ID_GET(_var)\
(((_var) & HTT_TX_WBM_REINJECT_MSDUQ_ID_M) >>\
HTT_TX_WBM_REINJECT_MSDUQ_ID_S)\
#define HTT_TX_WBM_REINJECT_MSDUQ_ID_SET(_var, _val)\
do {\
HTT_CHECK_SET_VAL(HTT_TX_WBM_REINJECT_MSDUQ_ID, _val); \
((_var) |= ((_val) << HTT_TX_WBM_REINJECT_MSDUQ_ID_S));\
} while(0)
/**
* @brief HTT TX WBM multicast echo check notification from firmware to host
* @details
* This structure applies only to WLAN chips that contain WLAN Buffer Mgmt
* (WBM) offload HW.
* This structure is passed from firmware to host overlaid on wbm_release_ring.
* used only if tx_status is HTT_TX_FW2WBM_TX_STATUS_MEC_NOTIFY.
* FW sends SA addresses to host for all multicast/broadcast packets received on
* STA side.
*/
PREPACK struct htt_tx_wbm_mec_addr_notify {
A_UINT32
mec_sa_addr_31_0;
A_UINT32
mec_sa_addr_47_32: 16,
sa_ast_index: 16;
A_UINT32
vdev_id: 8,
reserved0: 24;
} POSTPACK;
/* DWORD 4 - mec_sa_addr_31_0 */
/* DWORD 5 */
#define HTT_TX_WBM_COMPLETION_V2_MEC_SA_ADDR_47_32_M 0x0000ffff
#define HTT_TX_WBM_COMPLETION_V2_MEC_SA_ADDR_47_32_S 0
#define HTT_TX_WBM_COMPLETION_V2_SA_AST_INDEX_M 0xffff0000
#define HTT_TX_WBM_COMPLETION_V2_SA_AST_INDEX_S 16
/* DWORD 6 */
#define HTT_TX_WBM_COMPLETION_V2_VDEV_ID_M 0x000000ff
#define HTT_TX_WBM_COMPLETION_V2_VDEV_ID_S 0
#define HTT_TX_WBM_COMPLETION_V2_MEC_SA_ADDR_47_32_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_MEC_SA_ADDR_47_32_M) >> \
HTT_TX_WBM_COMPLETION_V2_MEC_SA_ADDR_47_32_S)
#define HTT_TX_WBM_COMPLETION_V2_MEC_SA_ADDR_47_32_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_MEC_SA_ADDR_47_32, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_MEC_SA_ADDR_47_32_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V2_SA_AST_INDEX_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_SA_AST_INDEX_M) >> \
HTT_TX_WBM_COMPLETION_V2_SA_AST_INDEX_S)
#define HTT_TX_WBM_COMPLETION_V2_SA_AST_INDEX_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_SA_AST_INDEX, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_SA_AST_INDEX_S)); \
} while (0)
#define HTT_TX_WBM_COMPLETION_V2_VDEV_ID_GET(_var) \
(((_var) & HTT_TX_WBM_COMPLETION_V2_VDEV_ID_M) >> \
HTT_TX_WBM_COMPLETION_V2_VDEV_ID_S)
#define HTT_TX_WBM_COMPLETION_V2_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_WBM_COMPLETION_V2_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_TX_WBM_COMPLETION_V2_VDEV_ID_S)); \
} while (0)
typedef enum {
TX_FLOW_PRIORITY_BE,
TX_FLOW_PRIORITY_HIGH,
TX_FLOW_PRIORITY_LOW,
} htt_tx_flow_priority_t;
typedef enum {
TX_FLOW_LATENCY_SENSITIVE,
TX_FLOW_LATENCY_INSENSITIVE,
} htt_tx_flow_latency_t;
typedef enum {
TX_FLOW_BEST_EFFORT_TRAFFIC,
TX_FLOW_INTERACTIVE_TRAFFIC,
TX_FLOW_PERIODIC_TRAFFIC,
TX_FLOW_BURSTY_TRAFFIC,
TX_FLOW_OVER_SUBSCRIBED_TRAFFIC,
} htt_tx_flow_traffic_pattern_t;
/**
* @brief HTT TX Flow search metadata format
* @details
* Host will set this metadata in flow table's flow search entry along with
* to_tqm_if_m0_fw. It indicates to forward the first MSDU to both the
* firmware and TQM ring if the flow search entry wins.
* This metadata is available to firmware in that first MSDU's
* tcl_exit_base->meta_data_fse. Firmware uses this metadata to map a new flow
* to one of the available flows for specific tid and returns the tqm flow
* pointer as part of htt_tx_map_flow_info message.
*/
PREPACK struct htt_tx_flow_metadata {
A_UINT32
rsvd0_1_0: 2,
tid: 4,
priority: 3, /* Takes enum values of htt_tx_flow_priority_t */
traffic_pattern: 3, /* Takes enum values of htt_tx_flow_traffic_pattern_t */
tid_override: 1, /* If set, tid field in this struct is the final tid.
* Else choose final tid based on latency, priority.
*/
dedicated_flowq: 1, /* Dedicated flowq per 5 tuple flow. */
latency_sensitive: 2, /* Takes enum values of htt_tx_flow_latency_t */
host_flow_identifier: 16; /* Used by host to map flow metadata with flow entry */
} POSTPACK;
/* DWORD 0 */
#define HTT_TX_FLOW_METADATA_TID_M 0x0000003c
#define HTT_TX_FLOW_METADATA_TID_S 2
#define HTT_TX_FLOW_METADATA_PRIORITY_M 0x000001c0
#define HTT_TX_FLOW_METADATA_PRIORITY_S 6
#define HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_M 0x00000e00
#define HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_S 9
#define HTT_TX_FLOW_METADATA_TID_OVERRIDE_M 0x00001000
#define HTT_TX_FLOW_METADATA_TID_OVERRIDE_S 12
#define HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_M 0x00002000
#define HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_S 13
#define HTT_TX_FLOW_METADATA_LATENCY_SENSITIVE_M 0x0000c000
#define HTT_TX_FLOW_METADATA_LATENCY_SENSITIVE_S 14
#define HTT_TX_FLOW_METADATA_HOST_FLOW_ID_M 0xffff0000
#define HTT_TX_FLOW_METADATA_HOST_FLOW_ID_S 16
/* DWORD 0 */
#define HTT_TX_FLOW_METADATA_TID_GET(_var) \
(((_var) & HTT_TX_FLOW_METADATA_TID_M) >> \
HTT_TX_FLOW_METADATA_TID_S)
#define HTT_TX_FLOW_METADATA_TID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_FLOW_METADATA_TID, _val); \
((_var) |= ((_val) << HTT_TX_FLOW_METADATA_TID_S)); \
} while (0)
#define HTT_TX_FLOW_METADATA_PRIORITY_GET(_var) \
(((_var) & HTT_TX_FLOW_PRIORITY_M) >> \
HTT_TX_FLOW_METADATA_PRIORITY_S)
#define HTT_TX_FLOW_METADATA_PRIORITY_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_FLOW_METADATA_PRIORITY, _val); \
((_var) |= ((_val) << HTT_TX_FLOW_METADATA_PRIORITY_S)); \
} while (0)
#define HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_GET(_var) \
(((_var) & HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_M) >> \
HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_S)
#define HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN, _val); \
((_var) |= ((_val) << HTT_TX_FLOW_METADATA_TRAFFIC_PATTERN_S)); \
} while (0)
#define HTT_TX_FLOW_METADATA_TID_OVERRIDE_GET(_var) \
(((_var) & HTT_TX_FLOW_METADATA_TID_OVERRIDE_M) >> \
HTT_TX_FLOW_METADATA_TID_OVERRIDE_S)
#define HTT_TX_FLOW_METADATA_TID_OVERRIDE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_FLOW_METADATA_TID_OVERRIDE, _val); \
((_var) |= ((_val) << HTT_TX_FLOW_METADATA_TID_OVERRIDE_S)); \
} while (0)
#define HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_GET(_var) \
(((_var) & HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_M) >> \
HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_S)
#define HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ, _val); \
((_var) |= ((_val) << HTT_TX_FLOW_METADATA_DEDICATED_FLOWQ_S)); \
} while (0)
#define HTT_TX_FLOW_METADATA_LATENCY_SENSITIVE_GET(_var) \
(((_var) & HTT_TX_FLOW_METADATA_LATENCY_SENSITIVE_M) >> \
HTT_TX_FLOW_METADATA_LATENCY_SENSITIVE_S)
#define HTT_TX_FLOW_METADATA_LATENCY_SENSITIVE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_FLOW_LATENCY_SENSITIVE, _val); \
((_var) |= ((_val) << HTT_TX_FLOW_LATENCY_SENSITIVE_S)); \
} while (0)
#define HTT_TX_FLOW_METADATA_HOST_FLOW_ID_GET(_var) \
(((_var) & HTT_TX_FLOW_METADATA_HOST_FLOW_ID_M) >> \
HTT_TX_FLOW_METADATA_HOST_FLOW_ID_S)
#define HTT_TX_FLOW_METADATA_HOST_FLOW_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_FLOW_METADATA_HOST_FLOW_ID, _val); \
((_var) |= ((_val) << HTT_TX_FLOW_METADATA_HOST_FLOW_ID_S)); \
} while (0)
/**
* @brief host -> target ADD WDS Entry
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_ADD_WDS_ENTRY
*
* @brief host -> target DELETE WDS Entry
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_DELETE_WDS_ENTRY
*
* @details
* HTT wds entry from source port learning
* Host will learn wds entries from rx and send this message to firmware
* to enable firmware to configure/delete AST entries for wds clients.
* Firmware creates Source address's AST entry with Transmit MAC's peer_id
* and when SA's entry is deleted, firmware removes this AST entry
*
* The message would appear as follows:
*
* |31 30|29 |17 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | rsvd0 |PDVID| vdev_id | msg_type |
* |-------------------------------------------------------------------|
* | sa_addr_31_0 |
* |-------------------------------------------------------------------|
* | | ta_peer_id | sa_addr_47_32 |
* |-------------------------------------------------------------------|
* Where PDVID = pdev_id
*
* The message is interpreted as follows:
*
* dword0 - b'0:7 - msg_type: This will be set to
* 0xd (HTT_H2T_MSG_TYPE_ADD_WDS_ENTRY) or
* 0xe (HTT_H2T_MSG_TYPE_DELETE_WDS_ENTRY)
*
* dword0 - b'8:15 - vdev_id
*
* dword0 - b'16:17 - pdev_id
*
* dword0 - b'18:31 - rsvd10: Reserved for future use
*
* dword1 - b'0:31 - sa_addr_31_0: Lower 32 bits of source mac address
*
* dword2 - b'0:15 - sa_addr_47_32: Upper 16 bits of source mac address
*
* dword2 - b'16:19 - ta_peer_id: peer id of Transmit MAC
*/
PREPACK struct htt_wds_entry {
A_UINT32
msg_type: 8,
vdev_id: 8,
pdev_id: 2,
rsvd0: 14;
A_UINT32 sa_addr_31_0;
A_UINT32
sa_addr_47_32: 16,
ta_peer_id: 14,
rsvd2: 2;
} POSTPACK;
/* DWORD 0 */
#define HTT_WDS_ENTRY_VDEV_ID_M 0x0000ff00
#define HTT_WDS_ENTRY_VDEV_ID_S 8
#define HTT_WDS_ENTRY_PDEV_ID_M 0x00030000
#define HTT_WDS_ENTRY_PDEV_ID_S 16
/* DWORD 2 */
#define HTT_WDS_ENTRY_SA_ADDR_47_32_M 0x0000ffff
#define HTT_WDS_ENTRY_SA_ADDR_47_32_S 0
#define HTT_WDS_ENTRY_TA_PEER_ID_M 0x3fff0000
#define HTT_WDS_ENTRY_TA_PEER_ID_S 16
/* DWORD 0 */
#define HTT_WDS_ENTRY_VDEV_ID_GET(_var) \
(((_var) & HTT_WDS_ENTRY_VDEV_ID_M) >> \
HTT_WDS_ENTRY_VDEV_ID_S)
#define HTT_WDS_ENTRY_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDS_ENTRY_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_WDS_ENTRY_VDEV_ID_S)); \
} while (0)
#define HTT_WDS_ENTRY_PDEV_ID_GET(_var) \
(((_var) & HTT_WDS_ENTRY_PDEV_ID_M) >> \
HTT_WDS_ENTRY_PDEV_ID_S)
#define HTT_WDS_ENTRY_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDS_ENTRY_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_WDS_ENTRY_PDEV_ID_S)); \
} while (0)
/* DWORD 2 */
#define HTT_WDS_ENTRY_SA_ADDR_47_32_GET(_var) \
(((_var) & HTT_WDS_ENTRY_SA_ADDR_47_32_M) >> \
HTT_WDS_ENTRY_SA_ADDR_47_32_S)
#define HTT_WDS_ENTRY_SA_ADDR_47_32_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDS_ENTRY_SA_ADDR_47_32, _val); \
((_var) |= ((_val) << HTT_WDS_ENTRY_SA_ADDR_47_32_S)); \
} while (0)
#define HTT_WDS_ENTRY_TA_PEER_ID_GET(_var) \
(((_var) & HTT_WDS_ENTRY_TA_PEER_ID_M) >> \
HTT_WDS_ENTRY_TA_PEER_ID_S)
#define HTT_WDS_ENTRY_TA_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDS_ENTRY_TA_PEER_ID, _val); \
((_var) |= ((_val) << HTT_WDS_ENTRY_TA_PEER_ID_S)); \
} while (0)
/**
* @brief MAC DMA rx ring setup specification
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_RX_RING_CFG
*
* @details
* To allow for dynamic rx ring reconfiguration and to avoid race
* conditions, the host SW never directly programs the MAC DMA rx ring(s)
* it uses. Instead, it sends this message to the target, indicating how
* the rx ring used by the host should be set up and maintained.
* The message consists of a 4-octet header followed by 1 or 2 rx ring setup
* specifications.
*
* |31 16|15 8|7 0|
* |---------------------------------------------------------------|
* header: | reserved | num rings | msg type |
* |---------------------------------------------------------------|
* payload 1: | FW_IDX shadow register physical address (bits 31:0) |
#if HTT_PADDR64
* | FW_IDX shadow register physical address (bits 63:32) |
#endif
* |---------------------------------------------------------------|
* | rx ring base physical address (bits 31:0) |
#if HTT_PADDR64
* | rx ring base physical address (bits 63:32) |
#endif
* |---------------------------------------------------------------|
* | rx ring buffer size | rx ring length |
* |---------------------------------------------------------------|
* | FW_IDX initial value | enabled flags |
* |---------------------------------------------------------------|
* | MSDU payload offset | 802.11 header offset |
* |---------------------------------------------------------------|
* | PPDU end offset | PPDU start offset |
* |---------------------------------------------------------------|
* | MPDU end offset | MPDU start offset |
* |---------------------------------------------------------------|
* | MSDU end offset | MSDU start offset |
* |---------------------------------------------------------------|
* | frag info offset | rx attention offset |
* |---------------------------------------------------------------|
* payload 2, if present, has the same format as payload 1
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an rx ring configuration message
* Value: 0x2 (HTT_H2T_MSG_TYPE_RX_RING_CFG)
* - NUM_RINGS
* Bits 15:8
* Purpose: indicates whether the host is setting up one rx ring or two
* Value: 1 or 2
* Payload:
* for systems using 64-bit format for bus addresses:
* - IDX_SHADOW_REG_PADDR_LO
* Bits 31:0
* Value: lower 4 bytes of physical address of the host's
* FW_IDX shadow register
* - IDX_SHADOW_REG_PADDR_HI
* Bits 31:0
* Value: upper 4 bytes of physical address of the host's
* FW_IDX shadow register
* - RING_BASE_PADDR_LO
* Bits 31:0
* Value: lower 4 bytes of physical address of the host's rx ring
* - RING_BASE_PADDR_HI
* Bits 31:0
* Value: uppper 4 bytes of physical address of the host's rx ring
* for systems using 32-bit format for bus addresses:
* - IDX_SHADOW_REG_PADDR
* Bits 31:0
* Value: physical address of the host's FW_IDX shadow register
* - RING_BASE_PADDR
* Bits 31:0
* Value: physical address of the host's rx ring
* - RING_LEN
* Bits 15:0
* Value: number of elements in the rx ring
* - RING_BUF_SZ
* Bits 31:16
* Value: size of the buffers referenced by the rx ring, in byte units
* - ENABLED_FLAGS
* Bits 15:0
* Value: 1-bit flags to show whether different rx fields are enabled
* bit 0: 802.11 header enabled (1) or disabled (0)
* bit 1: MSDU payload enabled (1) or disabled (0)
* bit 2: PPDU start enabled (1) or disabled (0)
* bit 3: PPDU end enabled (1) or disabled (0)
* bit 4: MPDU start enabled (1) or disabled (0)
* bit 5: MPDU end enabled (1) or disabled (0)
* bit 6: MSDU start enabled (1) or disabled (0)
* bit 7: MSDU end enabled (1) or disabled (0)
* bit 8: rx attention enabled (1) or disabled (0)
* bit 9: frag info enabled (1) or disabled (0)
* bit 10: unicast rx enabled (1) or disabled (0)
* bit 11: multicast rx enabled (1) or disabled (0)
* bit 12: ctrl rx enabled (1) or disabled (0)
* bit 13: mgmt rx enabled (1) or disabled (0)
* bit 14: null rx enabled (1) or disabled (0)
* bit 15: phy data rx enabled (1) or disabled (0)
* - IDX_INIT_VAL
* Bits 31:16
* Purpose: Specify the initial value for the FW_IDX.
* Value: the number of buffers initially present in the host's rx ring
* - OFFSET_802_11_HDR
* Bits 15:0
* Value: offset in QUAD-bytes of 802.11 header from the buffer start
* - OFFSET_MSDU_PAYLOAD
* Bits 31:16
* Value: offset in QUAD-bytes of MSDU payload from the buffer start
* - OFFSET_PPDU_START
* Bits 15:0
* Value: offset in QUAD-bytes of PPDU start rx desc from the buffer start
* - OFFSET_PPDU_END
* Bits 31:16
* Value: offset in QUAD-bytes of PPDU end rx desc from the buffer start
* - OFFSET_MPDU_START
* Bits 15:0
* Value: offset in QUAD-bytes of MPDU start rx desc from the buffer start
* - OFFSET_MPDU_END
* Bits 31:16
* Value: offset in QUAD-bytes of MPDU end rx desc from the buffer start
* - OFFSET_MSDU_START
* Bits 15:0
* Value: offset in QUAD-bytes of MSDU start rx desc from the buffer start
* - OFFSET_MSDU_END
* Bits 31:16
* Value: offset in QUAD-bytes of MSDU end rx desc from the buffer start
* - OFFSET_RX_ATTN
* Bits 15:0
* Value: offset in QUAD-bytes of rx attention word from the buffer start
* - OFFSET_FRAG_INFO
* Bits 31:16
* Value: offset in QUAD-bytes of frag info table
*/
/* header fields */
#define HTT_RX_RING_CFG_NUM_RINGS_M 0xff00
#define HTT_RX_RING_CFG_NUM_RINGS_S 8
/* payload fields */
/* for systems using a 64-bit format for bus addresses */
#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_HI_M 0xffffffff
#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_HI_S 0
#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_LO_M 0xffffffff
#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_LO_S 0
#define HTT_RX_RING_CFG_BASE_PADDR_HI_M 0xffffffff
#define HTT_RX_RING_CFG_BASE_PADDR_HI_S 0
#define HTT_RX_RING_CFG_BASE_PADDR_LO_M 0xffffffff
#define HTT_RX_RING_CFG_BASE_PADDR_LO_S 0
/* for systems using a 32-bit format for bus addresses */
#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_M 0xffffffff
#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_S 0
#define HTT_RX_RING_CFG_BASE_PADDR_M 0xffffffff
#define HTT_RX_RING_CFG_BASE_PADDR_S 0
#define HTT_RX_RING_CFG_LEN_M 0xffff
#define HTT_RX_RING_CFG_LEN_S 0
#define HTT_RX_RING_CFG_BUF_SZ_M 0xffff0000
#define HTT_RX_RING_CFG_BUF_SZ_S 16
#define HTT_RX_RING_CFG_ENABLED_802_11_HDR_M 0x1
#define HTT_RX_RING_CFG_ENABLED_802_11_HDR_S 0
#define HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_M 0x2
#define HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_S 1
#define HTT_RX_RING_CFG_ENABLED_PPDU_START_M 0x4
#define HTT_RX_RING_CFG_ENABLED_PPDU_START_S 2
#define HTT_RX_RING_CFG_ENABLED_PPDU_END_M 0x8
#define HTT_RX_RING_CFG_ENABLED_PPDU_END_S 3
#define HTT_RX_RING_CFG_ENABLED_MPDU_START_M 0x10
#define HTT_RX_RING_CFG_ENABLED_MPDU_START_S 4
#define HTT_RX_RING_CFG_ENABLED_MPDU_END_M 0x20
#define HTT_RX_RING_CFG_ENABLED_MPDU_END_S 5
#define HTT_RX_RING_CFG_ENABLED_MSDU_START_M 0x40
#define HTT_RX_RING_CFG_ENABLED_MSDU_START_S 6
#define HTT_RX_RING_CFG_ENABLED_MSDU_END_M 0x80
#define HTT_RX_RING_CFG_ENABLED_MSDU_END_S 7
#define HTT_RX_RING_CFG_ENABLED_RX_ATTN_M 0x100
#define HTT_RX_RING_CFG_ENABLED_RX_ATTN_S 8
#define HTT_RX_RING_CFG_ENABLED_FRAG_INFO_M 0x200
#define HTT_RX_RING_CFG_ENABLED_FRAG_INFO_S 9
#define HTT_RX_RING_CFG_ENABLED_UCAST_M 0x400
#define HTT_RX_RING_CFG_ENABLED_UCAST_S 10
#define HTT_RX_RING_CFG_ENABLED_MCAST_M 0x800
#define HTT_RX_RING_CFG_ENABLED_MCAST_S 11
#define HTT_RX_RING_CFG_ENABLED_CTRL_M 0x1000
#define HTT_RX_RING_CFG_ENABLED_CTRL_S 12
#define HTT_RX_RING_CFG_ENABLED_MGMT_M 0x2000
#define HTT_RX_RING_CFG_ENABLED_MGMT_S 13
#define HTT_RX_RING_CFG_ENABLED_NULL_M 0x4000
#define HTT_RX_RING_CFG_ENABLED_NULL_S 14
#define HTT_RX_RING_CFG_ENABLED_PHY_M 0x8000
#define HTT_RX_RING_CFG_ENABLED_PHY_S 15
#define HTT_RX_RING_CFG_IDX_INIT_VAL_M 0xffff0000
#define HTT_RX_RING_CFG_IDX_INIT_VAL_S 16
#define HTT_RX_RING_CFG_OFFSET_802_11_HDR_M 0xffff
#define HTT_RX_RING_CFG_OFFSET_802_11_HDR_S 0
#define HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_M 0xffff0000
#define HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_S 16
#define HTT_RX_RING_CFG_OFFSET_PPDU_START_M 0xffff
#define HTT_RX_RING_CFG_OFFSET_PPDU_START_S 0
#define HTT_RX_RING_CFG_OFFSET_PPDU_END_M 0xffff0000
#define HTT_RX_RING_CFG_OFFSET_PPDU_END_S 16
#define HTT_RX_RING_CFG_OFFSET_MPDU_START_M 0xffff
#define HTT_RX_RING_CFG_OFFSET_MPDU_START_S 0
#define HTT_RX_RING_CFG_OFFSET_MPDU_END_M 0xffff0000
#define HTT_RX_RING_CFG_OFFSET_MPDU_END_S 16
#define HTT_RX_RING_CFG_OFFSET_MSDU_START_M 0xffff
#define HTT_RX_RING_CFG_OFFSET_MSDU_START_S 0
#define HTT_RX_RING_CFG_OFFSET_MSDU_END_M 0xffff0000
#define HTT_RX_RING_CFG_OFFSET_MSDU_END_S 16
#define HTT_RX_RING_CFG_OFFSET_RX_ATTN_M 0xffff
#define HTT_RX_RING_CFG_OFFSET_RX_ATTN_S 0
#define HTT_RX_RING_CFG_OFFSET_FRAG_INFO_M 0xffff0000
#define HTT_RX_RING_CFG_OFFSET_FRAG_INFO_S 16
#define HTT_RX_RING_CFG_HDR_BYTES 4
#define HTT_RX_RING_CFG_PAYLD_BYTES_64 44
#define HTT_RX_RING_CFG_PAYLD_BYTES_32 36
#if HTT_PADDR64
#define HTT_RX_RING_CFG_PAYLD_BYTES HTT_RX_RING_CFG_PAYLD_BYTES_64
#else
#define HTT_RX_RING_CFG_PAYLD_BYTES HTT_RX_RING_CFG_PAYLD_BYTES_32
#endif
#define HTT_RX_RING_CFG_BYTES(num_rings) \
(HTT_RX_RING_CFG_HDR_BYTES + (num_rings) * HTT_RX_RING_CFG_PAYLD_BYTES)
#define HTT_RX_RING_CFG_NUM_RINGS_GET(_var) \
(((_var) & HTT_RX_RING_CFG_NUM_RINGS_M) >> HTT_RX_RING_CFG_NUM_RINGS_S)
#define HTT_RX_RING_CFG_NUM_RINGS_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_NUM_RINGS, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_NUM_RINGS_S)); \
} while (0)
/* degenerate case for 32-bit fields */
#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_HI_GET(_var) (_var)
#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_HI_SET(_var, _val) \
((_var) = (_val))
#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_LO_GET(_var) (_var)
#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_LO_SET(_var, _val) \
((_var) = (_val))
#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_GET(_var) (_var)
#define HTT_RX_RING_CFG_IDX_SHADOW_REG_PADDR_SET(_var, _val) \
((_var) = (_val))
/* degenerate case for 32-bit fields */
#define HTT_RX_RING_CFG_BASE_PADDR_HI_GET(_var) (_var)
#define HTT_RX_RING_CFG_BASE_PADDR_HI_SET(_var, _val) \
((_var) = (_val))
#define HTT_RX_RING_CFG_BASE_PADDR_LO_GET(_var) (_var)
#define HTT_RX_RING_CFG_BASE_PADDR_LO_SET(_var, _val) \
((_var) = (_val))
#define HTT_RX_RING_CFG_BASE_PADDR_GET(_var) (_var)
#define HTT_RX_RING_CFG_BASE_PADDR_SET(_var, _val) \
((_var) = (_val))
#define HTT_RX_RING_CFG_LEN_GET(_var) \
(((_var) & HTT_RX_RING_CFG_LEN_M) >> HTT_RX_RING_CFG_LEN_S)
#define HTT_RX_RING_CFG_LEN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_LEN, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_LEN_S)); \
} while (0)
#define HTT_RX_RING_CFG_BUF_SZ_GET(_var) \
(((_var) & HTT_RX_RING_CFG_BUF_SZ_M) >> HTT_RX_RING_CFG_BUF_SZ_S)
#define HTT_RX_RING_CFG_BUF_SZ_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_BUF_SZ, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_BUF_SZ_S)); \
} while (0)
#define HTT_RX_RING_CFG_IDX_INIT_VAL_GET(_var) \
(((_var) & HTT_RX_RING_CFG_IDX_INIT_VAL_M) >> \
HTT_RX_RING_CFG_IDX_INIT_VAL_S)
#define HTT_RX_RING_CFG_IDX_INIT_VAL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_IDX_INIT_VAL, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_IDX_INIT_VAL_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_802_11_HDR_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_802_11_HDR_M) >> \
HTT_RX_RING_CFG_ENABLED_802_11_HDR_S)
#define HTT_RX_RING_CFG_ENABLED_802_11_HDR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_802_11_HDR, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_802_11_HDR_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_M) >> \
HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_S)
#define HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MSDU_PAYLD_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_PPDU_START_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_PPDU_START_M) >> \
HTT_RX_RING_CFG_ENABLED_PPDU_START_S)
#define HTT_RX_RING_CFG_ENABLED_PPDU_START_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_PPDU_START, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_PPDU_START_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_PPDU_END_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_PPDU_END_M) >> \
HTT_RX_RING_CFG_ENABLED_PPDU_END_S)
#define HTT_RX_RING_CFG_ENABLED_PPDU_END_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_PPDU_END, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_PPDU_END_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_MPDU_START_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_MPDU_START_M) >> \
HTT_RX_RING_CFG_ENABLED_MPDU_START_S)
#define HTT_RX_RING_CFG_ENABLED_MPDU_START_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MPDU_START, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MPDU_START_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_MPDU_END_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_MPDU_END_M) >> \
HTT_RX_RING_CFG_ENABLED_MPDU_END_S)
#define HTT_RX_RING_CFG_ENABLED_MPDU_END_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MPDU_END, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MPDU_END_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_MSDU_START_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_MSDU_START_M) >> \
HTT_RX_RING_CFG_ENABLED_MSDU_START_S)
#define HTT_RX_RING_CFG_ENABLED_MSDU_START_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MSDU_START, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MSDU_START_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_MSDU_END_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_MSDU_END_M) >> \
HTT_RX_RING_CFG_ENABLED_MSDU_END_S)
#define HTT_RX_RING_CFG_ENABLED_MSDU_END_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MSDU_END, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MSDU_END_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_RX_ATTN_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_RX_ATTN_M) >> \
HTT_RX_RING_CFG_ENABLED_RX_ATTN_S)
#define HTT_RX_RING_CFG_ENABLED_RX_ATTN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_RX_ATTN, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_RX_ATTN_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_FRAG_INFO_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_FRAG_INFO_M) >> \
HTT_RX_RING_CFG_ENABLED_FRAG_INFO_S)
#define HTT_RX_RING_CFG_ENABLED_FRAG_INFO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_FRAG_INFO, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_FRAG_INFO_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_UCAST_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_UCAST_M) >> \
HTT_RX_RING_CFG_ENABLED_UCAST_S)
#define HTT_RX_RING_CFG_ENABLED_UCAST_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_UCAST, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_UCAST_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_MCAST_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_MCAST_M) >> \
HTT_RX_RING_CFG_ENABLED_MCAST_S)
#define HTT_RX_RING_CFG_ENABLED_MCAST_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MCAST, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MCAST_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_CTRL_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_CTRL_M) >> \
HTT_RX_RING_CFG_ENABLED_CTRL_S)
#define HTT_RX_RING_CFG_ENABLED_CTRL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_CTRL, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_CTRL_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_MGMT_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_MGMT_M) >> \
HTT_RX_RING_CFG_ENABLED_MGMT_S)
#define HTT_RX_RING_CFG_ENABLED_MGMT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_MGMT, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_MGMT_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_NULL_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_NULL_M) >> \
HTT_RX_RING_CFG_ENABLED_NULL_S)
#define HTT_RX_RING_CFG_ENABLED_NULL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_NULL, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_NULL_S)); \
} while (0)
#define HTT_RX_RING_CFG_ENABLED_PHY_GET(_var) \
(((_var) & HTT_RX_RING_CFG_ENABLED_PHY_M) >> \
HTT_RX_RING_CFG_ENABLED_PHY_S)
#define HTT_RX_RING_CFG_ENABLED_PHY_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_ENABLED_PHY, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_ENABLED_PHY_S)); \
} while (0)
#define HTT_RX_RING_CFG_OFFSET_802_11_HDR_GET(_var) \
(((_var) & HTT_RX_RING_CFG_OFFSET_802_11_HDR_M) >> \
HTT_RX_RING_CFG_OFFSET_802_11_HDR_S)
#define HTT_RX_RING_CFG_OFFSET_802_11_HDR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_802_11_HDR, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_802_11_HDR_S)); \
} while (0)
#define HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_GET(_var) \
(((_var) & HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_M) >> \
HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_S)
#define HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_MSDU_PAYLD_S)); \
} while (0)
#define HTT_RX_RING_CFG_OFFSET_PPDU_START_GET(_var) \
(((_var) & HTT_RX_RING_CFG_OFFSET_PPDU_START_M) >> \
HTT_RX_RING_CFG_OFFSET_PPDU_START_S)
#define HTT_RX_RING_CFG_OFFSET_PPDU_START_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_PPDU_START, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_PPDU_START_S)); \
} while (0)
#define HTT_RX_RING_CFG_OFFSET_PPDU_END_GET(_var) \
(((_var) & HTT_RX_RING_CFG_OFFSET_PPDU_END_M) >> \
HTT_RX_RING_CFG_OFFSET_PPDU_END_S)
#define HTT_RX_RING_CFG_OFFSET_PPDU_END_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_PPDU_END, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_PPDU_END_S)); \
} while (0)
#define HTT_RX_RING_CFG_OFFSET_MPDU_START_GET(_var) \
(((_var) & HTT_RX_RING_CFG_OFFSET_MPDU_START_M) >> \
HTT_RX_RING_CFG_OFFSET_MPDU_START_S)
#define HTT_RX_RING_CFG_OFFSET_MPDU_START_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_MPDU_START, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_MPDU_START_S)); \
} while (0)
#define HTT_RX_RING_CFG_OFFSET_MPDU_END_GET(_var) \
(((_var) & HTT_RX_RING_CFG_OFFSET_MPDU_END_M) >> \
HTT_RX_RING_CFG_OFFSET_MPDU_END_S)
#define HTT_RX_RING_CFG_OFFSET_MPDU_END_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_MPDU_END, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_MPDU_END_S)); \
} while (0)
#define HTT_RX_RING_CFG_OFFSET_MSDU_START_GET(_var) \
(((_var) & HTT_RX_RING_CFG_OFFSET_MSDU_START_M) >> \
HTT_RX_RING_CFG_OFFSET_MSDU_START_S)
#define HTT_RX_RING_CFG_OFFSET_MSDU_START_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_MSDU_START, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_MSDU_START_S)); \
} while (0)
#define HTT_RX_RING_CFG_OFFSET_MSDU_END_GET(_var) \
(((_var) & HTT_RX_RING_CFG_OFFSET_MSDU_END_M) >> \
HTT_RX_RING_CFG_OFFSET_MSDU_END_S)
#define HTT_RX_RING_CFG_OFFSET_MSDU_END_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_MSDU_END, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_MSDU_END_S)); \
} while (0)
#define HTT_RX_RING_CFG_OFFSET_RX_ATTN_GET(_var) \
(((_var) & HTT_RX_RING_CFG_OFFSET_RX_ATTN_M) >> \
HTT_RX_RING_CFG_OFFSET_RX_ATTN_S)
#define HTT_RX_RING_CFG_OFFSET_RX_ATTN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_RX_ATTN, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_RX_ATTN_S)); \
} while (0)
#define HTT_RX_RING_CFG_OFFSET_FRAG_INFO_GET(_var) \
(((_var) & HTT_RX_RING_CFG_OFFSET_FRAG_INFO_M) >> \
HTT_RX_RING_CFG_OFFSET_FRAG_INFO_S)
#define HTT_RX_RING_CFG_OFFSET_FRAG_INFO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_CFG_OFFSET_FRAG_INFO, _val); \
((_var) |= ((_val) << HTT_RX_RING_CFG_OFFSET_FRAG_INFO_S)); \
} while (0)
/**
* @brief host -> target FW statistics retrieve
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_STATS_REQ
*
* @details
* The following field definitions describe the format of the HTT host
* to target FW stats retrieve message. The message specifies the type of
* stats host wants to retrieve.
*
* |31 24|23 16|15 8|7 0|
* |-----------------------------------------------------------|
* | stats types request bitmask | msg type |
* |-----------------------------------------------------------|
* | stats types reset bitmask | reserved |
* |-----------------------------------------------------------|
* | stats type | config value |
* |-----------------------------------------------------------|
* | cookie LSBs |
* |-----------------------------------------------------------|
* | cookie MSBs |
* |-----------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this is a stats upload request message
* Value: 0x3 (HTT_H2T_MSG_TYPE_STATS_REQ)
* - UPLOAD_TYPES
* Bits 31:8
* Purpose: identifies which types of FW statistics to upload
* Value: mask with bits set in positions defined by htt_dbg_stats_type
* - RESET_TYPES
* Bits 31:8
* Purpose: identifies which types of FW statistics to reset
* Value: mask with bits set in positions defined by htt_dbg_stats_type
* - CFG_VAL
* Bits 23:0
* Purpose: give an opaque configuration value to the specified stats type
* Value: stats-type specific configuration value
* if stats type == tx PPDU log, then CONFIG_VAL has the format:
* bits 7:0 - how many per-MPDU byte counts to include in a record
* bits 15:8 - how many per-MPDU MSDU counts to include in a record
* bits 23:16 - how many per-MSDU byte counts to include in a record
* - CFG_STAT_TYPE
* Bits 31:24
* Purpose: specify which stats type (if any) the config value applies to
* Value: htt_dbg_stats_type value, or 0xff if the message doesn't have
* a valid configuration specification
* - COOKIE_LSBS
* Bits 31:0
* Purpose: Provide a mechanism to match a target->host stats confirmation
* message with its preceding host->target stats request message.
* Value: LSBs of the opaque cookie specified by the host-side requestor
* - COOKIE_MSBS
* Bits 31:0
* Purpose: Provide a mechanism to match a target->host stats confirmation
* message with its preceding host->target stats request message.
* Value: MSBs of the opaque cookie specified by the host-side requestor
*/
#define HTT_H2T_STATS_REQ_MSG_SZ 20 /* bytes */
#define HTT_H2T_STATS_REQ_CFG_STAT_TYPE_INVALID 0xff
#define HTT_H2T_STATS_REQ_UPLOAD_TYPES_M 0xffffff00
#define HTT_H2T_STATS_REQ_UPLOAD_TYPES_S 8
#define HTT_H2T_STATS_REQ_RESET_TYPES_M 0xffffff00
#define HTT_H2T_STATS_REQ_RESET_TYPES_S 8
#define HTT_H2T_STATS_REQ_CFG_VAL_M 0x00ffffff
#define HTT_H2T_STATS_REQ_CFG_VAL_S 0
#define HTT_H2T_STATS_REQ_CFG_STAT_TYPE_M 0xff000000
#define HTT_H2T_STATS_REQ_CFG_STAT_TYPE_S 24
#define HTT_H2T_STATS_REQ_UPLOAD_TYPES_GET(_var) \
(((_var) & HTT_H2T_STATS_REQ_UPLOAD_TYPES_M) >> \
HTT_H2T_STATS_REQ_UPLOAD_TYPES_S)
#define HTT_H2T_STATS_REQ_UPLOAD_TYPES_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_STATS_REQ_UPLOAD_TYPES, _val); \
((_var) |= ((_val) << HTT_H2T_STATS_REQ_UPLOAD_TYPES_S)); \
} while (0)
#define HTT_H2T_STATS_REQ_RESET_TYPES_GET(_var) \
(((_var) & HTT_H2T_STATS_REQ_RESET_TYPES_M) >> \
HTT_H2T_STATS_REQ_RESET_TYPES_S)
#define HTT_H2T_STATS_REQ_RESET_TYPES_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_STATS_REQ_RESET_TYPES, _val); \
((_var) |= ((_val) << HTT_H2T_STATS_REQ_RESET_TYPES_S)); \
} while (0)
#define HTT_H2T_STATS_REQ_CFG_VAL_GET(_var) \
(((_var) & HTT_H2T_STATS_REQ_CFG_VAL_M) >> \
HTT_H2T_STATS_REQ_CFG_VAL_S)
#define HTT_H2T_STATS_REQ_CFG_VAL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_STATS_REQ_CFG_VAL, _val); \
((_var) |= ((_val) << HTT_H2T_STATS_REQ_CFG_VAL_S)); \
} while (0)
#define HTT_H2T_STATS_REQ_CFG_STAT_TYPE_GET(_var) \
(((_var) & HTT_H2T_STATS_REQ_CFG_STAT_TYPE_M) >> \
HTT_H2T_STATS_REQ_CFG_STAT_TYPE_S)
#define HTT_H2T_STATS_REQ_CFG_STAT_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_STATS_REQ_CFG_STAT_TYPE, _val); \
((_var) |= ((_val) << HTT_H2T_STATS_REQ_CFG_STAT_TYPE_S)); \
} while (0)
/**
* @brief host -> target HTT out-of-band sync request
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_SYNC
*
* @details
* The HTT SYNC tells the target to suspend processing of subsequent
* HTT host-to-target messages until some other target agent locally
* informs the target HTT FW that the current sync counter is equal to
* or greater than (in a modulo sense) the sync counter specified in
* the SYNC message.
* This allows other host-target components to synchronize their operation
* with HTT, e.g. to ensure that tx frames don't get transmitted until a
* security key has been downloaded to and activated by the target.
* In the absence of any explicit synchronization counter value
* specification, the target HTT FW will use zero as the default current
* sync value.
*
* |31 24|23 16|15 8|7 0|
* |-----------------------------------------------------------|
* | reserved | sync count | msg type |
* |-----------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a sync message
* Value: 0x4 (HTT_H2T_MSG_TYPE_SYNC)
* - SYNC_COUNT
* Bits 15:8
* Purpose: specifies what sync value the HTT FW will wait for from
* an out-of-band specification to resume its operation
* Value: in-band sync counter value to compare against the out-of-band
* counter spec.
* The HTT target FW will suspend its host->target message processing
* as long as
* 0 < (in-band sync counter - out-of-band sync counter) & 0xff < 128
*/
#define HTT_H2T_SYNC_MSG_SZ 4
#define HTT_H2T_SYNC_COUNT_M 0x0000ff00
#define HTT_H2T_SYNC_COUNT_S 8
#define HTT_H2T_SYNC_COUNT_GET(_var) \
(((_var) & HTT_H2T_SYNC_COUNT_M) >> \
HTT_H2T_SYNC_COUNT_S)
#define HTT_H2T_SYNC_COUNT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_SYNC_COUNT, _val); \
((_var) |= ((_val) << HTT_H2T_SYNC_COUNT_S)); \
} while (0)
/**
* @brief host -> target HTT aggregation configuration
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_AGGR_CFG
*/
#define HTT_AGGR_CFG_MSG_SZ 4
#define HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_M 0xff00
#define HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_S 8
#define HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_M 0x1f0000
#define HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_S 16
#define HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_GET(_var) \
(((_var) & HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_M) >> \
HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_S)
#define HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM, _val); \
((_var) |= ((_val) << HTT_AGGR_CFG_MAX_NUM_AMPDU_SUBFRM_S)); \
} while (0)
#define HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_GET(_var) \
(((_var) & HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_M) >> \
HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_S)
#define HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM, _val); \
((_var) |= ((_val) << HTT_AGGR_CFG_MAX_NUM_AMSDU_SUBFRM_S)); \
} while (0)
/**
* @brief host -> target HTT configure max amsdu info per vdev
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_AGGR_CFG_EX
*
* @details
* The HTT AGGR CFG EX tells the target to configure max_amsdu info per vdev
*
* |31 21|20 16|15 8|7 0|
* |-----------------------------------------------------------|
* | reserved | vdev id | max amsdu | msg type |
* |-----------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a aggr cfg ex message
* Value: 0xa (HTT_H2T_MSG_TYPE_AGGR_CFG_EX)
* - MAX_NUM_AMSDU_SUBFRM
* Bits 15:8
* Purpose: max MSDUs per A-MSDU
* - VDEV_ID
* Bits 20:16
* Purpose: ID of the vdev to which this limit is applied
*/
#define HTT_AGGR_CFG_EX_MSG_SZ 4
#define HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_M 0xff00
#define HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_S 8
#define HTT_AGGR_CFG_EX_VDEV_ID_M 0x1f0000
#define HTT_AGGR_CFG_EX_VDEV_ID_S 16
#define HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_GET(_var) \
(((_var) & HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_M) >> \
HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_S)
#define HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM, _val); \
((_var) |= ((_val) << HTT_AGGR_CFG_EX_MAX_NUM_AMSDU_SUBFRM_S)); \
} while (0)
#define HTT_AGGR_CFG_EX_VDEV_ID_GET(_var) \
(((_var) & HTT_AGGR_CFG_EX_VDEV_ID_M) >> \
HTT_AGGR_CFG_EX_VDEV_ID_S)
#define HTT_AGGR_CFG_EX_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_AGGR_CFG_EX_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_AGGR_CFG_EX_VDEV_ID_S)); \
} while (0)
/**
* @brief HTT WDI_IPA Config Message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_WDI_IPA_CFG
*
* @details
* The HTT WDI_IPA config message is created/sent by host at driver
* init time. It contains information about data structures used on
* WDI_IPA TX and RX path.
* TX CE ring is used for pushing packet metadata from IPA uC
* to WLAN FW
* TX Completion ring is used for generating TX completions from
* WLAN FW to IPA uC
* RX Indication ring is used for indicating RX packets from FW
* to IPA uC
* RX Ring2 is used as either completion ring or as second
* indication ring. when Ring2 is used as completion ring, IPA uC
* puts completed RX packet meta data to Ring2. when Ring2 is used
* as second indication ring, RX packets for LTE-WLAN aggregation are
* indicated in Ring2, other RX packets (e.g. hotspot related) are
* indicated in RX Indication ring. Please see WDI_IPA specification
* for more details.
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | tx pkt pool size | Rsvd | msg_type |
* |-------------------------------------------------------------------|
* | tx comp ring base (bits 31:0) |
#if HTT_PADDR64
* | tx comp ring base (bits 63:32) |
#endif
* |-------------------------------------------------------------------|
* | tx comp ring size |
* |-------------------------------------------------------------------|
* | tx comp WR_IDX physical address (bits 31:0) |
#if HTT_PADDR64
* | tx comp WR_IDX physical address (bits 63:32) |
#endif
* |-------------------------------------------------------------------|
* | tx CE WR_IDX physical address (bits 31:0) |
#if HTT_PADDR64
* | tx CE WR_IDX physical address (bits 63:32) |
#endif
* |-------------------------------------------------------------------|
* | rx indication ring base (bits 31:0) |
#if HTT_PADDR64
* | rx indication ring base (bits 63:32) |
#endif
* |-------------------------------------------------------------------|
* | rx indication ring size |
* |-------------------------------------------------------------------|
* | rx ind RD_IDX physical address (bits 31:0) |
#if HTT_PADDR64
* | rx ind RD_IDX physical address (bits 63:32) |
#endif
* |-------------------------------------------------------------------|
* | rx ind WR_IDX physical address (bits 31:0) |
#if HTT_PADDR64
* | rx ind WR_IDX physical address (bits 63:32) |
#endif
* |-------------------------------------------------------------------|
* |-------------------------------------------------------------------|
* | rx ring2 base (bits 31:0) |
#if HTT_PADDR64
* | rx ring2 base (bits 63:32) |
#endif
* |-------------------------------------------------------------------|
* | rx ring2 size |
* |-------------------------------------------------------------------|
* | rx ring2 RD_IDX physical address (bits 31:0) |
#if HTT_PADDR64
* | rx ring2 RD_IDX physical address (bits 63:32) |
#endif
* |-------------------------------------------------------------------|
* | rx ring2 WR_IDX physical address (bits 31:0) |
#if HTT_PADDR64
* | rx ring2 WR_IDX physical address (bits 63:32) |
#endif
* |-------------------------------------------------------------------|
*
* Header fields:
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: Identifies this as WDI_IPA config message
* value: = 0x8 (HTT_H2T_MSG_TYPE_WDI_IPA_CFG)
* - TX_PKT_POOL_SIZE
* Bits 15:0
* Purpose: Total number of TX packet buffer pool allocated by Host for
* WDI_IPA TX path
* For systems using 32-bit format for bus addresses:
* - TX_COMP_RING_BASE_ADDR
* Bits 31:0
* Purpose: TX Completion Ring base address in DDR
* - TX_COMP_RING_SIZE
* Bits 31:0
* Purpose: TX Completion Ring size (must be power of 2)
* - TX_COMP_WR_IDX_ADDR
* Bits 31:0
* Purpose: IPA doorbell register address OR DDR address where WIFI FW
* updates the Write Index for WDI_IPA TX completion ring
* - TX_CE_WR_IDX_ADDR
* Bits 31:0
* Purpose: DDR address where IPA uC
* updates the WR Index for TX CE ring
* (needed for fusion platforms)
* - RX_IND_RING_BASE_ADDR
* Bits 31:0
* Purpose: RX Indication Ring base address in DDR
* - RX_IND_RING_SIZE
* Bits 31:0
* Purpose: RX Indication Ring size
* - RX_IND_RD_IDX_ADDR
* Bits 31:0
* Purpose: DDR address where IPA uC updates the Read Index for WDI_IPA
* RX indication ring
* - RX_IND_WR_IDX_ADDR
* Bits 31:0
* Purpose: IPA doorbell register address OR DDR address where WIFI FW
* updates the Write Index for WDI_IPA RX indication ring
* - RX_RING2_BASE_ADDR
* Bits 31:0
* Purpose: Second RX Ring(Indication or completion)base address in DDR
* - RX_RING2_SIZE
* Bits 31:0
* Purpose: Second RX Ring size (must be >= RX_IND_RING_SIZE)
* - RX_RING2_RD_IDX_ADDR
* Bits 31:0
* Purpose: If Second RX ring is Indication ring, DDR address where
* IPA uC updates the Read Index for Ring2.
* If Second RX ring is completion ring, this is NOT used
* - RX_RING2_WR_IDX_ADDR
* Bits 31:0
* Purpose: If Second RX ring is Indication ring, DDR address where
* WIFI FW updates the Write Index for WDI_IPA RX ring2
* If second RX ring is completion ring, DDR address where
* IPA uC updates the Write Index for Ring 2.
* For systems using 64-bit format for bus addresses:
* - TX_COMP_RING_BASE_ADDR_LO
* Bits 31:0
* Purpose: Lower 4 bytes of TX Completion Ring base physical address in DDR
* - TX_COMP_RING_BASE_ADDR_HI
* Bits 31:0
* Purpose: Higher 4 bytes of TX Completion Ring base physical address in DDR
* - TX_COMP_RING_SIZE
* Bits 31:0
* Purpose: TX Completion Ring size (must be power of 2)
* - TX_COMP_WR_IDX_ADDR_LO
* Bits 31:0
* Purpose: Lower 4 bytes of IPA doorbell register address OR
* Lower 4 bytes of DDR address where WIFI FW
* updates the Write Index for WDI_IPA TX completion ring
* - TX_COMP_WR_IDX_ADDR_HI
* Bits 31:0
* Purpose: Higher 4 bytes of IPA doorbell register address OR
* Higher 4 bytes of DDR address where WIFI FW
* updates the Write Index for WDI_IPA TX completion ring
* - TX_CE_WR_IDX_ADDR_LO
* Bits 31:0
* Purpose: Lower 4 bytes of DDR address where IPA uC
* updates the WR Index for TX CE ring
* (needed for fusion platforms)
* - TX_CE_WR_IDX_ADDR_HI
* Bits 31:0
* Purpose: Higher 4 bytes of DDR address where IPA uC
* updates the WR Index for TX CE ring
* (needed for fusion platforms)
* - RX_IND_RING_BASE_ADDR_LO
* Bits 31:0
* Purpose: Lower 4 bytes of RX Indication Ring base address in DDR
* - RX_IND_RING_BASE_ADDR_HI
* Bits 31:0
* Purpose: Higher 4 bytes of RX Indication Ring base address in DDR
* - RX_IND_RING_SIZE
* Bits 31:0
* Purpose: RX Indication Ring size
* - RX_IND_RD_IDX_ADDR_LO
* Bits 31:0
* Purpose: Lower 4 bytes of DDR address where IPA uC updates the Read Index
* for WDI_IPA RX indication ring
* - RX_IND_RD_IDX_ADDR_HI
* Bits 31:0
* Purpose: Higher 4 bytes of DDR address where IPA uC updates the Read Index
* for WDI_IPA RX indication ring
* - RX_IND_WR_IDX_ADDR_LO
* Bits 31:0
* Purpose: Lower 4 bytes of IPA doorbell register address OR
* Lower 4 bytes of DDR address where WIFI FW
* updates the Write Index for WDI_IPA RX indication ring
* - RX_IND_WR_IDX_ADDR_HI
* Bits 31:0
* Purpose: Higher 4 bytes of IPA doorbell register address OR
* Higher 4 bytes of DDR address where WIFI FW
* updates the Write Index for WDI_IPA RX indication ring
* - RX_RING2_BASE_ADDR_LO
* Bits 31:0
* Purpose: Lower 4 bytes of Second RX Ring(Indication OR completion)base address in DDR
* - RX_RING2_BASE_ADDR_HI
* Bits 31:0
* Purpose: Higher 4 bytes of Second RX Ring(Indication OR completion)base address in DDR
* - RX_RING2_SIZE
* Bits 31:0
* Purpose: Second RX Ring size (must be >= RX_IND_RING_SIZE)
* - RX_RING2_RD_IDX_ADDR_LO
* Bits 31:0
* Purpose: If Second RX ring is Indication ring, lower 4 bytes of
* DDR address where IPA uC updates the Read Index for Ring2.
* If Second RX ring is completion ring, this is NOT used
* - RX_RING2_RD_IDX_ADDR_HI
* Bits 31:0
* Purpose: If Second RX ring is Indication ring, higher 4 bytes of
* DDR address where IPA uC updates the Read Index for Ring2.
* If Second RX ring is completion ring, this is NOT used
* - RX_RING2_WR_IDX_ADDR_LO
* Bits 31:0
* Purpose: If Second RX ring is Indication ring, lower 4 bytes of
* DDR address where WIFI FW updates the Write Index
* for WDI_IPA RX ring2
* If second RX ring is completion ring, lower 4 bytes of
* DDR address where IPA uC updates the Write Index for Ring 2.
* - RX_RING2_WR_IDX_ADDR_HI
* Bits 31:0
* Purpose: If Second RX ring is Indication ring, higher 4 bytes of
* DDR address where WIFI FW updates the Write Index
* for WDI_IPA RX ring2
* If second RX ring is completion ring, higher 4 bytes of
* DDR address where IPA uC updates the Write Index for Ring 2.
*/
#if HTT_PADDR64
#define HTT_WDI_IPA_CFG_SZ 88 /* bytes */
#else
#define HTT_WDI_IPA_CFG_SZ 52 /* bytes */
#endif
#define HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_M 0xffff0000
#define HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_S 16
#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_M 0xffffffff
#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_S 0
#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_M 0xffffffff
#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_S 0
#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_M 0xffffffff
#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_S 0
#define HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_M 0xffffffff
#define HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_S 0
#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_M 0xffffffff
#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_S 0
#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_M 0xffffffff
#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_S 0
#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_M 0xffffffff
#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_S 0
#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_M 0xffffffff
#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_S 0
#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_M 0xffffffff
#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_S 0
#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_M 0xffffffff
#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_S 0
#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_S 0
#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_S 0
#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_S 0
#define HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_S 0
#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_S 0
#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_S 0
#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_S 0
#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_S 0
#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_S 0
#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_S 0
#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_S 0
#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_S 0
#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_S 0
#define HTT_WDI_IPA_CFG_RX_RING2_SIZE_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_RING2_SIZE_S 0
#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_S 0
#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_S 0
#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_S 0
#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_S 0
#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_S 0
#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_M 0xffffffff
#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_S 0
#define HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_M) >> HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_S)
#define HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_PKT_POOL_SIZE_S)); \
} while (0)
/* for systems using 32-bit format for bus addr */
#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_M) >> HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_S)
#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_M) >> HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_S)
#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_HI_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_M) >> HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_S)
#define HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_RING_BASE_ADDR_LO_S)); \
} while (0)
#define HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_M) >> HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_S)
#define HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_RING_SIZE_S)); \
} while (0)
/* for systems using 32-bit format for bus addr */
#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_M) >> HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_S)
#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_M) >> HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_S)
#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_HI_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_M) >> HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_S)
#define HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_COMP_WR_IDX_ADDR_LO_S)); \
} while (0)
/* for systems using 32-bit format for bus addr */
#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_M) >> HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_S)
#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_M) >> HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_S)
#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_HI_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_M) >> HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_S)
#define HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_TX_CE_WR_IDX_ADDR_LO_S)); \
} while (0)
/* for systems using 32-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_M) >> HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_S)
#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_M) >> HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_S)
#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_HI_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_M) >> HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_S)
#define HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RING_BASE_ADDR_LO_S)); \
} while (0)
#define HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_M) >> HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_S)
#define HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RING_SIZE, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RING_SIZE_S)); \
} while (0)
/* for systems using 32-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_M) >> HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_S)
#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_M) >> HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_S)
#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_HI_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_M) >> HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_S)
#define HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_RD_IDX_ADDR_LO_S)); \
} while (0)
/* for systems using 32-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_M) >> HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_S)
#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_M) >> HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_S)
#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_HI_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_M) >> HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_S)
#define HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_IND_WR_IDX_ADDR_LO_S)); \
} while (0)
/* for systems using 32-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_M) >> HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_S)
#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_M) >> HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_S)
#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_HI_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_M) >> HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_S)
#define HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_BASE_ADDR_LO_S)); \
} while (0)
#define HTT_WDI_IPA_CFG_RX_RING2_SIZE_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_RING2_SIZE_M) >> HTT_WDI_IPA_CFG_RX_RING2_SIZE_S)
#define HTT_WDI_IPA_CFG_RX_RING2_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_SIZE, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_SIZE_S)); \
} while (0)
/* for systems using 32-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_M) >> HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_S)
#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_M) >> HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_S)
#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_HI_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_M) >> HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_S)
#define HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_RD_IDX_ADDR_LO_S)); \
} while (0)
/* for systems using 32-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_M) >> HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_S)
#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_M) >> HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_S)
#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_HI_S)); \
} while (0)
/* for systems using 64-bit format for bus addr */
#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_GET(_var) \
(((_var) & HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_M) >> HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_S)
#define HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_CFG_RX_RING2_WR_IDX_ADDR_LO_S)); \
} while (0)
/*
* TEMPLATE_HTT_WDI_IPA_CONFIG_T:
* This macro defines a htt_wdi_ipa_configXXX_t in which any physical
* addresses are stored in a XXX-bit field.
* This macro is used to define both htt_wdi_ipa_config32_t and
* htt_wdi_ipa_config64_t structs.
*/
#define TEMPLATE_HTT_WDI_IPA_CONFIG_T(_paddr_bits_, \
_paddr__tx_comp_ring_base_addr_, \
_paddr__tx_comp_wr_idx_addr_, \
_paddr__tx_ce_wr_idx_addr_, \
_paddr__rx_ind_ring_base_addr_, \
_paddr__rx_ind_rd_idx_addr_, \
_paddr__rx_ind_wr_idx_addr_, \
_paddr__rx_ring2_base_addr_,\
_paddr__rx_ring2_rd_idx_addr_,\
_paddr__rx_ring2_wr_idx_addr_) \
PREPACK struct htt_wdi_ipa_cfg ## _paddr_bits_ ## _t \
{ \
/* DWORD 0: flags and meta-data */ \
A_UINT32 \
msg_type: 8, /* HTT_H2T_MSG_TYPE_WDI_IPA_CFG */ \
reserved: 8, \
tx_pkt_pool_size: 16;\
/* DWORD 1 */\
_paddr__tx_comp_ring_base_addr_;\
/* DWORD 2 (or 3)*/\
A_UINT32 tx_comp_ring_size;\
/* DWORD 3 (or 4)*/\
_paddr__tx_comp_wr_idx_addr_;\
/* DWORD 4 (or 6)*/\
_paddr__tx_ce_wr_idx_addr_;\
/* DWORD 5 (or 8)*/\
_paddr__rx_ind_ring_base_addr_;\
/* DWORD 6 (or 10)*/\
A_UINT32 rx_ind_ring_size;\
/* DWORD 7 (or 11)*/\
_paddr__rx_ind_rd_idx_addr_;\
/* DWORD 8 (or 13)*/\
_paddr__rx_ind_wr_idx_addr_;\
/* DWORD 9 (or 15)*/\
_paddr__rx_ring2_base_addr_;\
/* DWORD 10 (or 17) */\
A_UINT32 rx_ring2_size;\
/* DWORD 11 (or 18) */\
_paddr__rx_ring2_rd_idx_addr_;\
/* DWORD 12 (or 20) */\
_paddr__rx_ring2_wr_idx_addr_;\
} POSTPACK
/* define a htt_wdi_ipa_config32_t type */
TEMPLATE_HTT_WDI_IPA_CONFIG_T(32, HTT_VAR_PADDR32(tx_comp_ring_base_addr), HTT_VAR_PADDR32(tx_comp_wr_idx_addr), HTT_VAR_PADDR32(tx_ce_wr_idx_addr), HTT_VAR_PADDR32(rx_ind_ring_base_addr), HTT_VAR_PADDR32(rx_ind_rd_idx_addr),HTT_VAR_PADDR32(rx_ind_wr_idx_addr), HTT_VAR_PADDR32(rx_ring2_base_addr), HTT_VAR_PADDR32(rx_ring2_rd_idx_addr), HTT_VAR_PADDR32(rx_ring2_wr_idx_addr));
/* define a htt_wdi_ipa_config64_t type */
TEMPLATE_HTT_WDI_IPA_CONFIG_T(64, HTT_VAR_PADDR64_LE(tx_comp_ring_base_addr), HTT_VAR_PADDR64_LE(tx_comp_wr_idx_addr), HTT_VAR_PADDR64_LE(tx_ce_wr_idx_addr), HTT_VAR_PADDR64_LE(rx_ind_ring_base_addr), HTT_VAR_PADDR64_LE(rx_ind_rd_idx_addr), HTT_VAR_PADDR64_LE(rx_ind_wr_idx_addr), HTT_VAR_PADDR64_LE(rx_ring2_base_addr), HTT_VAR_PADDR64_LE(rx_ring2_rd_idx_addr), HTT_VAR_PADDR64_LE(rx_ring2_wr_idx_addr));
#if HTT_PADDR64
#define htt_wdi_ipa_cfg_t htt_wdi_ipa_cfg64_t
#else
#define htt_wdi_ipa_cfg_t htt_wdi_ipa_cfg32_t
#endif
enum htt_wdi_ipa_op_code {
HTT_WDI_IPA_OPCODE_TX_SUSPEND = 0,
HTT_WDI_IPA_OPCODE_TX_RESUME = 1,
HTT_WDI_IPA_OPCODE_RX_SUSPEND = 2,
HTT_WDI_IPA_OPCODE_RX_RESUME = 3,
HTT_WDI_IPA_OPCODE_DBG_STATS = 4,
HTT_WDI_IPA_OPCODE_GET_SHARING_STATS = 5,
HTT_WDI_IPA_OPCODE_SET_QUOTA = 6,
HTT_WDI_IPA_OPCODE_IND_QUOTA = 7,
/* keep this last */
HTT_WDI_IPA_OPCODE_MAX
};
/**
* @brief HTT WDI_IPA Operation Request Message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_WDI_IPA_OP_REQ
*
* @details
* HTT WDI_IPA Operation Request message is sent by host
* to either suspend or resume WDI_IPA TX or RX path.
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | op_code | Rsvd | msg_type |
* |-------------------------------------------------------------------|
*
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: Identifies this as WDI_IPA Operation Request message
* value: = 0x9 (HTT_H2T_MSG_TYPE_WDI_IPA_OP_REQ)
* - OP_CODE
* Bits 31:16
* Purpose: Identifies operation host is requesting (e.g. TX suspend)
* value: = enum htt_wdi_ipa_op_code
*/
PREPACK struct htt_wdi_ipa_op_request_t
{
/* DWORD 0: flags and meta-data */
A_UINT32
msg_type: 8, /* HTT_H2T_MSG_TYPE_WDI_IPA_OP_REQUEST */
reserved: 8,
op_code: 16;
} POSTPACK;
#define HTT_WDI_IPA_OP_REQUEST_SZ 4 /* bytes */
#define HTT_WDI_IPA_OP_REQUEST_OP_CODE_M 0xffff0000
#define HTT_WDI_IPA_OP_REQUEST_OP_CODE_S 16
#define HTT_WDI_IPA_OP_REQUEST_OP_CODE_GET(_var) \
(((_var) & HTT_WDI_IPA_OP_REQUEST_OP_CODE_M) >> HTT_WDI_IPA_OP_REQUEST_OP_CODE_S)
#define HTT_WDI_IPA_OP_REQUEST_OP_CODE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_OP_REQUEST_OP_CODE, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_OP_REQUEST_OP_CODE_S)); \
} while (0)
/*
* @brief host -> target HTT_MSI_SETUP message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_MSI_SETUP
*
* @details
* After target is booted up, host can send MSI setup message so that
* target sets up HW registers based on setup message.
*
* The message would appear as follows:
* |31 24|23 16|15|14 8|7 0|
* |---------------+-----------------+-----------------+-----------------|
* | reserved | msi_type | pdev_id | msg_type |
* |---------------------------------------------------------------------|
* | msi_addr_lo |
* |---------------------------------------------------------------------|
* | msi_addr_hi |
* |---------------------------------------------------------------------|
* | msi_data |
* |---------------------------------------------------------------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to
* 0x1f (HTT_H2T_MSG_TYPE_MSI_SETUP)
* b'8:15 - pdev_id:
* 0 (for rings at SOC/UMAC level),
* 1/2/3 mac id (for rings at LMAC level)
* b'16:23 - msi_type: identify which msi registers need to be setup
* more details can be got from enum htt_msi_setup_type
* b'24:31 - reserved
* dword8 - b'0:31 - ring_msi_addr_lo: Lower 32bits of MSI cfg address
* dword9 - b'0:31 - ring_msi_addr_hi: Upper 32bits of MSI cfg address
* dword10 - b'0:31 - ring_msi_data: MSI data configured by host
*/
PREPACK struct htt_msi_setup_t {
A_UINT32 msg_type: 8,
pdev_id: 8,
msi_type: 8,
reserved: 8;
A_UINT32 msi_addr_lo;
A_UINT32 msi_addr_hi;
A_UINT32 msi_data;
} POSTPACK;
enum htt_msi_setup_type {
HTT_PPDU_END_MSI_SETUP_TYPE,
/* Insert new types here*/
};
#define HTT_MSI_SETUP_SZ (sizeof(struct htt_msi_setup_t))
#define HTT_MSI_SETUP_PDEV_ID_M 0x0000ff00
#define HTT_MSI_SETUP_PDEV_ID_S 8
#define HTT_MSI_SETUP_PDEV_ID_GET(_var) \
(((_var) & HTT_MSI_SETUP_PDEV_ID_M) >> \
HTT_MSI_SETUP_PDEV_ID_S)
#define HTT_MSI_SETUP_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_MSI_SETUP_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_MSI_SETUP_PDEV_ID_S)); \
} while (0)
#define HTT_MSI_SETUP_MSI_TYPE_M 0x00ff0000
#define HTT_MSI_SETUP_MSI_TYPE_S 16
#define HTT_MSI_SETUP_MSI_TYPE_GET(_var) \
(((_var) & HTT_MSI_SETUP_MSI_TYPE_M) >> \
HTT_MSI_SETUP_MSI_TYPE_S)
#define HTT_MSI_SETUP_MSI_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_MSI_SETUP_MSI_TYPE, _val); \
((_var) |= ((_val) << HTT_MSI_SETUP_MSI_TYPE_S)); \
} while (0)
#define HTT_MSI_SETUP_MSI_ADDR_LO_M 0xffffffff
#define HTT_MSI_SETUP_MSI_ADDR_LO_S 0
#define HTT_MSI_SETUP_MSI_ADDR_LO_GET(_var) \
(((_var) & HTT_MSI_SETUP_MSI_ADDR_LO_M) >> \
HTT_MSI_SETUP_MSI_ADDR_LO_S)
#define HTT_MSI_SETUP_MSI_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_MSI_SETUP_MSI_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_MSI_SETUP_MSI_ADDR_LO_S)); \
} while (0)
#define HTT_MSI_SETUP_MSI_ADDR_HI_M 0xffffffff
#define HTT_MSI_SETUP_MSI_ADDR_HI_S 0
#define HTT_MSI_SETUP_MSI_ADDR_HI_GET(_var) \
(((_var) & HTT_MSI_SETUP_MSI_ADDR_HI_M) >> \
HTT_MSI_SETUP_MSI_ADDR_HI_S)
#define HTT_MSI_SETUP_MSI_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_MSI_SETUP_MSI_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_MSI_SETUP_MSI_ADDR_HI_S)); \
} while (0)
#define HTT_MSI_SETUP_MSI_DATA_M 0xffffffff
#define HTT_MSI_SETUP_MSI_DATA_S 0
#define HTT_MSI_SETUP_MSI_DATA_GET(_var) \
(((_var) & HTT_MSI_SETUP_MSI_DATA_M) >> \
HTT_MSI_SETUP_MSI_DATA_S)
#define HTT_MSI_SETUP_MSI_DATA_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_MSI_SETUP_MSI_DATA, _val); \
((_var) |= ((_val) << HTT_MSI_SETUP_MSI_DATA_S)); \
} while (0)
/*
* @brief host -> target HTT_SRING_SETUP message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_SRING_SETUP
*
* @details
* After target is booted up, Host can send SRING setup message for
* each host facing LMAC SRING. Target setups up HW registers based
* on setup message and confirms back to Host if response_required is set.
* Host should wait for confirmation message before sending new SRING
* setup message
*
* The message would appear as follows:
* |31 24|23 21|20|19|18 16|15|14 8|7 0|
* |--------------- +-----------------+-----------------+-----------------|
* | ring_type | ring_id | pdev_id | msg_type |
* |----------------------------------------------------------------------|
* | ring_base_addr_lo |
* |----------------------------------------------------------------------|
* | ring_base_addr_hi |
* |----------------------------------------------------------------------|
* |ring_misc_cfg_flag|ring_entry_size| ring_size |
* |----------------------------------------------------------------------|
* | ring_head_offset32_remote_addr_lo |
* |----------------------------------------------------------------------|
* | ring_head_offset32_remote_addr_hi |
* |----------------------------------------------------------------------|
* | ring_tail_offset32_remote_addr_lo |
* |----------------------------------------------------------------------|
* | ring_tail_offset32_remote_addr_hi |
* |----------------------------------------------------------------------|
* | ring_msi_addr_lo |
* |----------------------------------------------------------------------|
* | ring_msi_addr_hi |
* |----------------------------------------------------------------------|
* | ring_msi_data |
* |----------------------------------------------------------------------|
* | intr_timer_th |IM| intr_batch_counter_th |
* |----------------------------------------------------------------------|
* | reserved |ID|RR| PTCF| intr_low_threshold |
* |----------------------------------------------------------------------|
* | reserved |IPA drop thres hi|IPA drop thres lo|
* |----------------------------------------------------------------------|
* Where
* IM = sw_intr_mode
* RR = response_required
* PTCF = prefetch_timer_cfg
* IP = IPA drop flag
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to
* 0xb (HTT_H2T_MSG_TYPE_SRING_SETUP)
* b'8:15 - pdev_id:
* 0 (for rings at SOC/UMAC level),
* 1/2/3 mac id (for rings at LMAC level)
* b'16:23 - ring_id: identify which ring is to setup,
* more details can be got from enum htt_srng_ring_id
* b'24:31 - ring_type: identify type of host rings,
* more details can be got from enum htt_srng_ring_type
* dword1 - b'0:31 - ring_base_addr_lo: Lower 32bits of ring base address
* dword2 - b'0:31 - ring_base_addr_hi: Upper 32bits of ring base address
* dword3 - b'0:15 - ring_size: size of the ring in unit of 4-bytes words
* b'16:23 - ring_entry_size: Size of each entry in 4-byte word units
* b'24:31 - ring_misc_cfg_flag: Valid only for HW_TO_SW_RING and
* SW_TO_HW_RING.
* Refer to HTT_SRING_SETUP_RING_MISC_CFG_RING defs.
* dword4 - b'0:31 - ring_head_offset32_remote_addr_lo:
* Lower 32 bits of memory address of the remote variable
* storing the 4-byte word offset that identifies the head
* element within the ring.
* (The head offset variable has type A_UINT32.)
* Valid for HW_TO_SW and SW_TO_SW rings.
* dword5 - b'0:31 - ring_head_offset32_remote_addr_hi:
* Upper 32 bits of memory address of the remote variable
* storing the 4-byte word offset that identifies the head
* element within the ring.
* (The head offset variable has type A_UINT32.)
* Valid for HW_TO_SW and SW_TO_SW rings.
* dword6 - b'0:31 - ring_tail_offset32_remote_addr_lo:
* Lower 32 bits of memory address of the remote variable
* storing the 4-byte word offset that identifies the tail
* element within the ring.
* (The tail offset variable has type A_UINT32.)
* Valid for HW_TO_SW and SW_TO_SW rings.
* dword7 - b'0:31 - ring_tail_offset32_remote_addr_hi:
* Upper 32 bits of memory address of the remote variable
* storing the 4-byte word offset that identifies the tail
* element within the ring.
* (The tail offset variable has type A_UINT32.)
* Valid for HW_TO_SW and SW_TO_SW rings.
* dword8 - b'0:31 - ring_msi_addr_lo: Lower 32bits of MSI cfg address
* valid only for HW_TO_SW_RING and SW_TO_HW_RING
* dword9 - b'0:31 - ring_msi_addr_hi: Upper 32bits of MSI cfg address
* valid only for HW_TO_SW_RING and SW_TO_HW_RING
* dword10 - b'0:31 - ring_msi_data: MSI data
* Refer to HTT_SRING_SETUP_RING_MSC_CFG_xxx defs
* valid only for HW_TO_SW_RING and SW_TO_HW_RING
* dword11 - b'0:14 - intr_batch_counter_th:
* batch counter threshold is in units of 4-byte words.
* HW internally maintains and increments batch count.
* (see SRING spec for detail description).
* When batch count reaches threshold value, an interrupt
* is generated by HW.
* b'15 - sw_intr_mode:
* This configuration shall be static.
* Only programmed at power up.
* 0: generate pulse style sw interrupts
* 1: generate level style sw interrupts
* b'16:31 - intr_timer_th:
* The timer init value when timer is idle or is
* initialized to start downcounting.
* In 8us units (to cover a range of 0 to 524 ms)
* dword12 - b'0:15 - intr_low_threshold:
* Used only by Consumer ring to generate ring_sw_int_p.
* Ring entries low threshold water mark, that is used
* in combination with the interrupt timer as well as
* the the clearing of the level interrupt.
* b'16:18 - prefetch_timer_cfg:
* Used only by Consumer ring to set timer mode to
* support Application prefetch handling.
* The external tail offset/pointer will be updated
* at following intervals:
* 3'b000: (Prefetch feature disabled; used only for debug)
* 3'b001: 1 usec
* 3'b010: 4 usec
* 3'b011: 8 usec (default)
* 3'b100: 16 usec
* Others: Reserved
* b'19 - response_required:
* Host needs HTT_T2H_MSG_TYPE_SRING_SETUP_DONE as response
* b'20 - ipa_drop_flag:
Indicates that host will config ipa drop threshold percentage
* b'21:31 - reserved: reserved for future use
* dword13 - b'0:7 - ipa drop low threshold percentage:
* b'8:15 - ipa drop high threshold percentage:
* b'16:31 - Reserved
*/
PREPACK struct htt_sring_setup_t {
A_UINT32 msg_type: 8,
pdev_id: 8,
ring_id: 8,
ring_type: 8;
A_UINT32 ring_base_addr_lo;
A_UINT32 ring_base_addr_hi;
A_UINT32 ring_size: 16,
ring_entry_size: 8,
ring_misc_cfg_flag: 8;
A_UINT32 ring_head_offset32_remote_addr_lo;
A_UINT32 ring_head_offset32_remote_addr_hi;
A_UINT32 ring_tail_offset32_remote_addr_lo;
A_UINT32 ring_tail_offset32_remote_addr_hi;
A_UINT32 ring_msi_addr_lo;
A_UINT32 ring_msi_addr_hi;
A_UINT32 ring_msi_data;
A_UINT32 intr_batch_counter_th: 15,
sw_intr_mode: 1,
intr_timer_th: 16;
A_UINT32 intr_low_threshold: 16,
prefetch_timer_cfg: 3,
response_required: 1,
ipa_drop_flag: 1,
reserved1: 11;
A_UINT32 ipa_drop_low_threshold: 8,
ipa_drop_high_threshold: 8,
reserved: 16;
} POSTPACK;
enum htt_srng_ring_type {
HTT_HW_TO_SW_RING = 0,
HTT_SW_TO_HW_RING,
HTT_SW_TO_SW_RING,
/* Insert new ring types above this line */
};
enum htt_srng_ring_id {
HTT_RXDMA_HOST_BUF_RING = 0, /* Used by FW to feed remote buffers and update remote packets */
HTT_RXDMA_MONITOR_STATUS_RING, /* For getting all PPDU/MPDU/MSDU status deescriptors on host for monitor VAP or packet log purposes */
HTT_RXDMA_MONITOR_BUF_RING, /* For feeding free host buffers to RxDMA for monitor traffic upload */
HTT_RXDMA_MONITOR_DESC_RING, /* For providing free LINK_DESC to RXDMA for monitor traffic upload */
HTT_RXDMA_MONITOR_DEST_RING, /* Per MPDU indication to host for monitor traffic upload */
HTT_HOST1_TO_FW_RXBUF_RING, /* (mobile only) used by host to provide remote RX buffers */
HTT_HOST2_TO_FW_RXBUF_RING, /* (mobile only) second ring used by host to provide remote RX buffers */
HTT_RXDMA_NON_MONITOR_DEST_RING, /* Per MDPU indication to host for non-monitor RxDMA traffic upload */
HTT_RXDMA_HOST_BUF_RING2, /* Second ring used by FW to feed removed buffers and update removed packets */
HTT_TX_MON_HOST2MON_BUF_RING, /* Status buffers and Packet buffers are provided by host */
HTT_TX_MON_MON2HOST_DEST_RING, /* Used by monitor to fill status buffers and provide to host */
HTT_RX_MON_HOST2MON_BUF_RING, /* Status buffers and Packet buffers are provided by host */
HTT_RX_MON_MON2HOST_DEST_RING, /* Used by monitor to fill status buffers and provide to host */
HTT_LPASS_TO_FW_RXBUF_RING, /* new LPASS to FW refill ring to recycle rx buffers */
HTT_HOST3_TO_FW_RXBUF_RING, /* used by host for EasyMesh feature */
HTT_HOST4_TO_FW_RXBUF_RING, /* fourth ring used by host to provide buffers for MGMT packets */
/* Add Other SRING which can't be directly configured by host software above this line */
};
#define HTT_SRING_SETUP_SZ (sizeof(struct htt_sring_setup_t))
#define HTT_SRING_SETUP_PDEV_ID_M 0x0000ff00
#define HTT_SRING_SETUP_PDEV_ID_S 8
#define HTT_SRING_SETUP_PDEV_ID_GET(_var) \
(((_var) & HTT_SRING_SETUP_PDEV_ID_M) >> \
HTT_SRING_SETUP_PDEV_ID_S)
#define HTT_SRING_SETUP_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_PDEV_ID_S)); \
} while (0)
#define HTT_SRING_SETUP_RING_ID_M 0x00ff0000
#define HTT_SRING_SETUP_RING_ID_S 16
#define HTT_SRING_SETUP_RING_ID_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_ID_M) >> \
HTT_SRING_SETUP_RING_ID_S)
#define HTT_SRING_SETUP_RING_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_ID, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_ID_S)); \
} while (0)
#define HTT_SRING_SETUP_RING_TYPE_M 0xff000000
#define HTT_SRING_SETUP_RING_TYPE_S 24
#define HTT_SRING_SETUP_RING_TYPE_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_TYPE_M) >> \
HTT_SRING_SETUP_RING_TYPE_S)
#define HTT_SRING_SETUP_RING_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_TYPE, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_TYPE_S)); \
} while (0)
#define HTT_SRING_SETUP_RING_BASE_ADDR_LO_M 0xffffffff
#define HTT_SRING_SETUP_RING_BASE_ADDR_LO_S 0
#define HTT_SRING_SETUP_RING_BASE_ADDR_LO_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_BASE_ADDR_LO_M) >> \
HTT_SRING_SETUP_RING_BASE_ADDR_LO_S)
#define HTT_SRING_SETUP_RING_BASE_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_BASE_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_BASE_ADDR_LO_S)); \
} while (0)
#define HTT_SRING_SETUP_RING_BASE_ADDR_HI_M 0xffffffff
#define HTT_SRING_SETUP_RING_BASE_ADDR_HI_S 0
#define HTT_SRING_SETUP_RING_BASE_ADDR_HI_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_BASE_ADDR_HI_M) >> \
HTT_SRING_SETUP_RING_BASE_ADDR_HI_S)
#define HTT_SRING_SETUP_RING_BASE_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_BASE_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_BASE_ADDR_HI_S)); \
} while (0)
#define HTT_SRING_SETUP_RING_SIZE_M 0x0000ffff
#define HTT_SRING_SETUP_RING_SIZE_S 0
#define HTT_SRING_SETUP_RING_SIZE_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_SIZE_M) >> \
HTT_SRING_SETUP_RING_SIZE_S)
#define HTT_SRING_SETUP_RING_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_SIZE, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_SIZE_S)); \
} while (0)
#define HTT_SRING_SETUP_ENTRY_SIZE_M 0x00ff0000
#define HTT_SRING_SETUP_ENTRY_SIZE_S 16
#define HTT_SRING_SETUP_ENTRY_SIZE_GET(_var) \
(((_var) & HTT_SRING_SETUP_ENTRY_SIZE_M) >> \
HTT_SRING_SETUP_ENTRY_SIZE_S)
#define HTT_SRING_SETUP_ENTRY_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_ENTRY_SIZE, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_ENTRY_SIZE_S)); \
} while (0)
#define HTT_SRING_SETUP_MISC_CFG_FLAG_M 0xff000000
#define HTT_SRING_SETUP_MISC_CFG_FLAG_S 24
#define HTT_SRING_SETUP_MISC_CFG_FLAG_GET(_var) \
(((_var) & HTT_SRING_SETUP_MISC_CFG_FLAG_M) >> \
HTT_SRING_SETUP_MISC_CFG_FLAG_S)
#define HTT_SRING_SETUP_MISC_CFG_FLAG_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_MISC_CFG_FLAG, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_MISC_CFG_FLAG_S)); \
} while (0)
/* This control bit is applicable to only Producer, which updates Ring ID field
* of each descriptor before pushing into the ring.
* 0: updates ring_id(default)
* 1: ring_id updating disabled */
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_M 0x01000000
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_S 24
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_M) >> \
HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_S)
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RING_ID_DISABLE_S)); \
} while (0)
/* This control bit is applicable to only Producer, which updates Loopcnt field
* of each descriptor before pushing into the ring.
* 0: updates Loopcnt(default)
* 1: Loopcnt updating disabled */
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_M 0x02000000
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_S 25
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_M) >> \
HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_S)
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_MISC_CFG_FLAG_LOOPCOUNT_DISABLE_S)); \
} while (0)
/* Secured access enable/disable bit. SRNG drives value of this register bit
* into security_id port of GXI/AXI. */
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_M 0x04000000
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_S 26
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_M) >> \
HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_S)
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_MISC_CFG_FLAG_SECURITY_S)); \
} while (0)
/* During MSI write operation, SRNG drives value of this register bit into
* swap bit of GXI/AXI. */
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_M 0x08000000
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_S 27
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_M) >> \
HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_S)
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_MISC_CFG_FLAG_MSI_SWAP_S)); \
} while (0)
/* During Pointer write operation, SRNG drives value of this register bit into
* swap bit of GXI/AXI. */
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_M 0x10000000
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_S 28
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_M) >> \
HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_S)
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_MISC_CFG_FLAG_HOST_FW_SWAP_S)); \
} while (0)
/* During any data or TLV write operation, SRNG drives value of this register
* bit into swap bit of GXI/AXI. */
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_M 0x20000000
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_S 29
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_M) >> \
HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_S)
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_MISC_CFG_FLAG_TLV_SWAP_S)); \
} while (0)
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RESERVED1 0x40000000
#define HTT_SRING_SETUP_RING_MISC_CFG_FLAG_RESERVED2 0x80000000
#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_M 0xffffffff
#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_S 0
#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_GET(_var) \
(((_var) & HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_M) >> \
HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_S)
#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_LO_S)); \
} while (0)
#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_M 0xffffffff
#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_S 0
#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_GET(_var) \
(((_var) & HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_M) >> \
HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_S)
#define HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_HEAD_OFFSET32_REMOTE_BASE_ADDR_HI_S)); \
} while (0)
#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_M 0xffffffff
#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_S 0
#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_GET(_var) \
(((_var) & HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_M) >> \
HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_S)
#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_LO_S)); \
} while (0)
#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_M 0xffffffff
#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_S 0
#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_GET(_var) \
(((_var) & HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_M) >> \
HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_S)
#define HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_TAIL_OFFSET32_REMOTE_BASE_ADDR_HI_S)); \
} while (0)
#define HTT_SRING_SETUP_RING_MSI_ADDR_LO_M 0xffffffff
#define HTT_SRING_SETUP_RING_MSI_ADDR_LO_S 0
#define HTT_SRING_SETUP_RING_MSI_ADDR_LO_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_MSI_ADDR_LO_M) >> \
HTT_SRING_SETUP_RING_MSI_ADDR_LO_S)
#define HTT_SRING_SETUP_RING_MSI_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MSI_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_MSI_ADDR_LO_S)); \
} while (0)
#define HTT_SRING_SETUP_RING_MSI_ADDR_HI_M 0xffffffff
#define HTT_SRING_SETUP_RING_MSI_ADDR_HI_S 0
#define HTT_SRING_SETUP_RING_MSI_ADDR_HI_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_MSI_ADDR_HI_M) >> \
HTT_SRING_SETUP_RING_MSI_ADDR_HI_S)
#define HTT_SRING_SETUP_RING_MSI_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MSI_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_MSI_ADDR_HI_S)); \
} while (0)
#define HTT_SRING_SETUP_RING_MSI_DATA_M 0xffffffff
#define HTT_SRING_SETUP_RING_MSI_DATA_S 0
#define HTT_SRING_SETUP_RING_MSI_DATA_GET(_var) \
(((_var) & HTT_SRING_SETUP_RING_MSI_DATA_M) >> \
HTT_SRING_SETUP_RING_MSI_DATA_S)
#define HTT_SRING_SETUP_RING_MSI_DATA_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RING_MSI_DATA, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RING_MSI_DATA_S)); \
} while (0)
#define HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_M 0x00007fff
#define HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_S 0
#define HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_GET(_var) \
(((_var) & HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_M) >> \
HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_S)
#define HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_INTR_BATCH_COUNTER_TH_S)); \
} while (0)
#define HTT_SRING_SETUP_SW_INTR_MODE_M 0x00008000
#define HTT_SRING_SETUP_SW_INTR_MODE_S 15
#define HTT_SRING_SETUP_SW_INTR_MODE_GET(_var) \
(((_var) & HTT_SRING_SETUP_SW_INTR_MODE_M) >> \
HTT_SRING_SETUP_SW_INTR_MODE_S)
#define HTT_SRING_SETUP_SW_INTR_MODE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_SW_INTR_MODE, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_SW_INTR_MODE_S)); \
} while (0)
#define HTT_SRING_SETUP_INTR_TIMER_TH_M 0xffff0000
#define HTT_SRING_SETUP_INTR_TIMER_TH_S 16
#define HTT_SRING_SETUP_INTR_TIMER_TH_GET(_var) \
(((_var) & HTT_SRING_SETUP_INTR_TIMER_TH_M) >> \
HTT_SRING_SETUP_INTR_TIMER_TH_S)
#define HTT_SRING_SETUP_INTR_TIMER_TH_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_INTR_TIMER_TH, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_INTR_TIMER_TH_S)); \
} while (0)
#define HTT_SRING_SETUP_INTR_LOW_TH_M 0x0000ffff
#define HTT_SRING_SETUP_INTR_LOW_TH_S 0
#define HTT_SRING_SETUP_INTR_LOW_TH_GET(_var) \
(((_var) & HTT_SRING_SETUP_INTR_LOW_TH_M) >> \
HTT_SRING_SETUP_INTR_LOW_TH_S)
#define HTT_SRING_SETUP_INTR_LOW_TH_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_INTR_LOW_TH, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_INTR_LOW_TH_S)); \
} while (0)
#define HTT_SRING_SETUP_PREFETCH_TIMER_CFG_M 0x00070000
#define HTT_SRING_SETUP_PREFETCH_TIMER_CFG_S 16
#define HTT_SRING_SETUP_PREFETCH_TIMER_CFG_GET(_var) \
(((_var) & HTT_SRING_SETUP_PREFETCH_TIMER_CFG_M) >> \
HTT_SRING_SETUP_PREFETCH_TIMER_CFG_S)
#define HTT_SRING_SETUP_PREFETCH_TIMER_CFG_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_PREFETCH_TIMER_CFG, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_PREFETCH_TIMER_CFG_S)); \
} while (0)
#define HTT_SRING_SETUP_RESPONSE_REQUIRED_M 0x00080000
#define HTT_SRING_SETUP_RESPONSE_REQUIRED_S 19
#define HTT_SRING_SETUP_RESPONSE_REQUIRED_GET(_var) \
(((_var) & HTT_SRING_SETUP_RESPONSE_REQUIRED_M) >> \
HTT_SRING_SETUP_RESPONSE_REQUIRED_S)
#define HTT_SRING_SETUP_RESPONSE_REQUIRED_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_RESPONSE_REQUIRED, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_RESPONSE_REQUIRED_S)); \
} while (0)
/**
* @brief host -> target RX ring selection config message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG
*
* @details
* HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG message is sent by host to
* configure RXDMA rings.
* The configuration is per ring based and includes both packet subtypes
* and PPDU/MPDU TLVs.
*
* The message would appear as follows:
*
* |31 29|28|27|26|25|24|23|22|21 19|18 16|15 | 11| 10|9 8|7 0|
* |-----+--+--+--+--+--+-----------------+----+---+---+---+---------------|
* |rsvd1|ED|DT|OV|PS|SS| ring_id | pdev_id | msg_type |
* |--------------------------+-----+-----+--------------------------------|
* | rsvd2 |RX|RXHDL| CLD | CLC | CLM | ring_buffer_size |
* |-----------------------------------------------------------------------|
* | packet_type_enable_flags_0 |
* |-----------------------------------------------------------------------|
* | packet_type_enable_flags_1 |
* |-----------------------------------------------------------------------|
* | packet_type_enable_flags_2 |
* |-----------------------------------------------------------------------|
* | packet_type_enable_flags_3 |
* |-----------------------------------------------------------------------|
* | tlv_filter_in_flags |
* |--------------------------------------+--------------------------------|
* | rx_header_offset | rx_packet_offset |
* |--------------------------------------+--------------------------------|
* | rx_mpdu_start_offset | rx_mpdu_end_offset |
* |--------------------------------------+--------------------------------|
* | rx_msdu_start_offset | rx_msdu_end_offset |
* |--------------------------------------+--------------------------------|
* | rsvd3 | rx_attention_offset |
* |-----------------------------------------------------------------------|
* | rsvd4 | mo| fp| rx_drop_threshold |
* | |ndp|ndp| |
* |-----------------------------------------------------------------------|
* Where:
* PS = pkt_swap
* SS = status_swap
* OV = rx_offsets_valid
* DT = drop_thresh_valid
* ED = packet type enable data flags fields present / valid
* CLM = config_length_mgmt
* CLC = config_length_ctrl
* CLD = config_length_data
* RXHDL = rx_hdr_len
* RX = rxpcu_filter_enable_flag
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to
* 0xc (HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG)
* b'8:15 - pdev_id:
* 0 (for rings at SOC/UMAC level),
* 1/2/3 mac id (for rings at LMAC level)
* b'16:23 - ring_id : Identify the ring to configure.
* More details can be got from enum htt_srng_ring_id
* b'24 - status_swap (SS): 1 is to swap status TLV - refer to
* BUF_RING_CFG_0 defs within HW .h files,
* e.g. wmac_top_reg_seq_hwioreg.h
* b'25 - pkt_swap (PS): 1 is to swap packet TLV - refer to
* BUF_RING_CFG_0 defs within HW .h files,
* e.g. wmac_top_reg_seq_hwioreg.h
* b'26 - rx_offset_valid (OV): flag to indicate rx offsets
* configuration fields are valid
* b'27 - drop_thresh_valid (DT): flag to indicate if the
* rx_drop_threshold field is valid
* b'28 - rx_mon_global_en: Enable/Disable global register
* configuration in Rx monitor module.
* b'29 - packet_type_enable_data: flag to indicate whether
* newer packet_type_enable_data_flags_* are valid or not
* If not set, will use pkt_type_enable_flags for both status
* and full pkt buffer configuration.
* b'30:31 - rsvd1: reserved for future use
* dword1 - b'0:15 - ring_buffer_size: size of bufferes referenced by rx ring,
* in byte units.
* Valid only for HW_TO_SW_RING and SW_TO_HW_RING
* b'16:18 - config_length_mgmt (MGMT):
* Represents the length of mpdu bytes for mgmt pkt.
* valid values:
* 001 - 64bytes
* 010 - 128bytes
* 100 - 256bytes
* 111 - Full mpdu bytes
* b'19:21 - config_length_ctrl (CTRL):
* Represents the length of mpdu bytes for ctrl pkt.
* valid values:
* 001 - 64bytes
* 010 - 128bytes
* 100 - 256bytes
* 111 - Full mpdu bytes
* b'22:24 - config_length_data (DATA):
* Represents the length of mpdu bytes for data pkt.
* valid values:
* 001 - 64bytes
* 010 - 128bytes
* 100 - 256bytes
* 111 - Full mpdu bytes
* b'25:26 - rx_hdr_len:
* Specifies the number of bytes of recvd packet to copy
* into the rx_hdr tlv.
* supported values for now by host:
* 01 - 64bytes
* 10 - 128bytes
* 11 - 256bytes
* default - 128 bytes
* b'27 - rxpcu_filter_enable_flag
* For Scan Radio Host CPU utilization is very high.
* In order to reduce CPU utilization we need to filter out
* certain configured MAC frames.
* To filter out configured MAC address frames, RxPCU should
* be zero which means allow all frames for MD at RxOLE
* host wil fiter out frames.
* RxPCU (Filter IN) -> RxOLE (Filter In/Filter Out)
* b'28:31 - rsvd2: Reserved for future use
* dword2 - b'0:31 - packet_type_enable_flags_0:
* Enable MGMT packet from 0b0000 to 0b1001
* bits from low to high: FP, MD, MO - 3 bits
* FP: Filter_Pass
* MD: Monitor_Direct
* MO: Monitor_Other
* 10 mgmt subtypes * 3 bits -> 30 bits
* Refer to PKT_TYPE_ENABLE_FLAG0_xxx_MGMT_xxx defs
* dword3 - b'0:31 - packet_type_enable_flags_1:
* Enable MGMT packet from 0b1010 to 0b1111
* bits from low to high: FP, MD, MO - 3 bits
* Refer to PKT_TYPE_ENABLE_FLAG1_xxx_MGMT_xxx defs
* dword4 - b'0:31 - packet_type_enable_flags_2:
* Enable CTRL packet from 0b0000 to 0b1001
* bits from low to high: FP, MD, MO - 3 bits
* Refer to PKT_TYPE_ENABLE_FLAG2_xxx_CTRL_xxx defs
* dword5 - b'0:31 - packet_type_enable_flags_3:
* Enable CTRL packet from 0b1010 to 0b1111,
* MCAST_DATA, UCAST_DATA, NULL_DATA
* bits from low to high: FP, MD, MO - 3 bits
* Refer to PKT_TYPE_ENABLE_FLAG3_xxx_CTRL_xxx defs
* dword6 - b'0:31 - tlv_filter_in_flags:
* Filter in Attention/MPDU/PPDU/Header/User tlvs
* Refer to CFG_TLV_FILTER_IN_FLAG defs
* dword7 - b'0:15 - rx_packet_offset: rx_packet_offset in byte units
* Valid only for HW_TO_SW_RING and SW_TO_HW_RING
* A value of 0 will be considered as ignore this config.
* Refer to BUF_RING_CFG_1 defs within HW .h files,
* e.g. wmac_top_reg_seq_hwioreg.h
* - b'16:31 - rx_header_offset: rx_header_offset in byte units
* Valid only for HW_TO_SW_RING and SW_TO_HW_RING
* A value of 0 will be considered as ignore this config.
* Refer to BUF_RING_CFG_1 defs within HW .h files,
* e.g. wmac_top_reg_seq_hwioreg.h
* dword8 - b'0:15 - rx_mpdu_end_offset: rx_mpdu_end_offset in byte units
* Valid only for HW_TO_SW_RING and SW_TO_HW_RING
* A value of 0 will be considered as ignore this config.
* Refer to BUF_RING_CFG_2 defs within HW .h files,
* e.g. wmac_top_reg_seq_hwioreg.h
* - b'16:31 - rx_mpdu_start_offset: rx_mpdu_start_offset in byte units
* Valid only for HW_TO_SW_RING and SW_TO_HW_RING
* A value of 0 will be considered as ignore this config.
* Refer to BUF_RING_CFG_2 defs within HW .h files,
* e.g. wmac_top_reg_seq_hwioreg.h
* dword9 - b'0:15 - rx_msdu_end_offset: rx_msdu_end_offset in byte units
* Valid only for HW_TO_SW_RING and SW_TO_HW_RING
* A value of 0 will be considered as ignore this config.
* Refer to BUF_RING_CFG_3 defs within HW .h files,
* e.g. wmac_top_reg_seq_hwioreg.h
* - b'16:31 - rx_msdu_start_offset: rx_msdu_start_offset in byte units
* Valid only for HW_TO_SW_RING and SW_TO_HW_RING
* A value of 0 will be considered as ignore this config.
* Refer to BUF_RING_CFG_3 defs within HW .h files,
* e.g. wmac_top_reg_seq_hwioreg.h
* dword10- b'0:15 - rx_attention_offset: rx_attention_offset in byte units
* Valid only for HW_TO_SW_RING and SW_TO_HW_RING
* A value of 0 will be considered as ignore this config.
* Refer to BUF_RING_CFG_4 defs within HW .h files,
* e.g. wmac_top_reg_seq_hwioreg.h
* - b'16:31 - rsvd3 for future use
* dword11- b'9:0 - rx_drop_threshold: Threshold configured in monitor mode
* to source rings. Consumer drops packets if the available
* words in the ring falls below the configured threshold
* value.
* - b'10 - fp_ndp: Flag to indicate FP NDP status tlv is subscribed
* by host. 1 -> subscribed
* - b'11 - mo_ndp: Flag to indicate MO NDP status tlv is subscribed
* by host. 1 -> subscribed
* - b'12 - fp_phy_err: Flag to indicate FP PHY status tlv is
* subscribed by host. 1 -> subscribed
* - b'13:14 - fp_phy_err_buf_src: This indicates the source ring
* selection for the FP PHY ERR status tlv.
* 0 - wbm2rxdma_buf_source_ring
* 1 - fw2rxdma_buf_source_ring
* 2 - sw2rxdma_buf_source_ring
* 3 - no_buffer_ring
* - b'15:16 - fp_phy_err_buf_dest: This indicates the destination ring
* selection for the FP PHY ERR status tlv.
* 0 - rxdma_release_ring
* 1 - rxdma2fw_ring
* 2 - rxdma2sw_ring
* 3 - rxdma2reo_ring
* - b'17:19 - pkt_type_en_msdu_or_mpdu_logging
* b'17 - Enables MSDU/MPDU logging for frames of MGMT type
* b'18 - Enables MSDU/MPDU logging for frames of CTRL type
* b'19 - Enables MSDU/MPDU logging for frames of DATA type
* - b'20 - dma_mpdu_mgmt: 1: MPDU level logging
* 0: MSDU level logging
* - b'21 - dma_mpdu_ctrl: 1: MPDU level logging
* 0: MSDU level logging
* - b'22 - dma_mpdu_data: 1: MPDU level logging
* 0: MSDU level logging
* - b'23 - word_mask_compaction: enable/disable word mask for
* mpdu/msdu start/end tlvs
* - b'24 - rbm_override_enable: enabling/disabling return buffer
* manager override
* - b'25:28 - rbm_override_val: return buffer manager override value
* dword12- b'0:31 - phy_err_mask: This field is to select the fp phy errors
* which have to be posted to host from phy.
* Corresponding to errors defined in
* phyrx_abort_request_reason enums 0 to 31.
* Refer to RXPCU register definition header files for the
* phyrx_abort_request_reason enum definition.
* dword13- b'0:31 - phy_err_mask_cont: This field is to select the fp phy
* errors which have to be posted to host from phy.
* Corresponding to errors defined in
* phyrx_abort_request_reason enums 32 to 63.
* Refer to RXPCU register definition header files for the
* phyrx_abort_request_reason enum definition.
* dword14- b'0:15 - rx_mpdu_start_word_mask: word mask for rx mpdu start,
* applicable if word mask enabled
* - b'16:18 - rx_mpdu_end_word_mask: word mask value for rx mpdu end,
* applicable if word mask enabled
* - b'19:31 - rsvd7
* dword15- b'0:16 - rx_msdu_end_word_mask
* - b'17:31 - rsvd5
* dword17- b'0 - en_rx_tlv_pkt_offset:
* 0: RX_PKT TLV logging at offset 0 for the subsequent
* buffer
* 1: RX_PKT TLV logging at specified offset for the
* subsequent buffer
* b`15:1 - rx_pkt_tlv_offset: Qword offset for rx_packet TLVs.
* dword18- b'0:19 - rx_mpdu_start_wmask_v2 - wmask address for rx mpdu start
* b'20-27 - rx_mpdu_end_wmask_v2 - wmask addr for rx mpdu end tlv addr
* b'28-31 - reserved
* dword19- b'0-19 - rx_msdu_end_wmask_v2
* b'20-31 - reserved
* dword20- b'0:19 - rx_ppdu_end_user_stats_wmask_v2
* offset for ppdu_end_user_stats tlv
* b'20-31 - reserved
* dword21- b'0-31 - packet_type_enable_fpmo_flags_0 - filter bmap for each
* mode mgmt/ctrl type/subtype for fpmo mode
* dword22- b'0-31 - packet_type_enable_fpmo_flags_1 - filter bmap for each
* mode ctrl/data type/subtype for fpmo mode
* dword23- b'0-31 - packet_type_enable_data_flags_0 - filter bmap for full
* pkt buffer each mode MGMT type/subtype
* dword24- b'0-31 - packet_type_enable_data_flags_0 - filter bmap for full
* pkt buffer each mode MGMT type/subtype
* dword25- b'0-31 - packet_type_enable_data_flags_0 - filter bmap for full
* pkt buffer each mode CTRL type/subtype
* dword26- b'0-31 - packet_type_enable_data_flags_0 - filter bmap for full
* pkt buffer each mode CTRL/DATA type/subtype
* dword27- b'0-31 - packet_type_enable_data_fpmo_flags_0 - filter bmap for
* full pkt buffer each mode mgmt/ctrl type/subtype for
* fpmo mode
* dword28- b'0-31 - packet_type_enable_data_fpmo_flags_1 - filter bmap for
* full pkt buffer each mode ctrl/data type/subtype for
* fpmo mode
*/
PREPACK struct htt_rx_ring_selection_cfg_t {
A_UINT32 msg_type: 8,
pdev_id: 8,
ring_id: 8,
status_swap: 1,
pkt_swap: 1,
rx_offsets_valid: 1,
drop_thresh_valid: 1,
rx_mon_global_en: 1,
packet_type_enable_data: 1,
rsvd1: 2;
A_UINT32 ring_buffer_size: 16,
config_length_mgmt:3,
config_length_ctrl:3,
config_length_data:3,
rx_hdr_len: 2,
rxpcu_filter_enable_flag:1,
rsvd2: 4;
A_UINT32 packet_type_enable_flags_0;
A_UINT32 packet_type_enable_flags_1;
A_UINT32 packet_type_enable_flags_2;
A_UINT32 packet_type_enable_flags_3;
A_UINT32 tlv_filter_in_flags;
A_UINT32 rx_packet_offset: 16,
rx_header_offset: 16;
A_UINT32 rx_mpdu_end_offset: 16,
rx_mpdu_start_offset: 16;
A_UINT32 rx_msdu_end_offset: 16,
rx_msdu_start_offset: 16;
A_UINT32 rx_attn_offset: 16,
rsvd3: 16;
A_UINT32 rx_drop_threshold: 10,
fp_ndp: 1,
mo_ndp: 1,
fp_phy_err: 1,
fp_phy_err_buf_src: 2,
fp_phy_err_buf_dest: 2,
pkt_type_enable_msdu_or_mpdu_logging:3,
dma_mpdu_mgmt: 1,
dma_mpdu_ctrl: 1,
dma_mpdu_data: 1,
word_mask_compaction_enable:1,
rbm_override_enable: 1,
rbm_override_val: 4,
rsvd4: 3;
A_UINT32 phy_err_mask;
A_UINT32 phy_err_mask_cont;
A_UINT32 rx_mpdu_start_word_mask:16,
rx_mpdu_end_word_mask: 3,
rsvd7: 13;
A_UINT32 rx_msdu_end_word_mask: 17,
rsvd5: 15;
A_UINT32 en_rx_tlv_pkt_offset: 1,
rx_pkt_tlv_offset: 15,
rsvd6: 16;
A_UINT32 rx_mpdu_start_word_mask_v2: 20,
rx_mpdu_end_word_mask_v2: 8,
rsvd8: 4;
A_UINT32 rx_msdu_end_word_mask_v2: 20,
rsvd9: 12;
A_UINT32 rx_ppdu_end_usr_stats_word_mask_v2: 20,
rsvd10: 12;
A_UINT32 packet_type_enable_fpmo_flags0;
A_UINT32 packet_type_enable_fpmo_flags1;
A_UINT32 packet_type_enable_data_flags_0;
A_UINT32 packet_type_enable_data_flags_1;
A_UINT32 packet_type_enable_data_flags_2;
A_UINT32 packet_type_enable_data_flags_3;
A_UINT32 packet_type_enable_data_fpmo_flags0;
A_UINT32 packet_type_enable_data_fpmo_flags1;
} POSTPACK;
#define HTT_RX_RING_SELECTION_CFG_SZ (sizeof(struct htt_rx_ring_selection_cfg_t))
#define HTT_RX_RING_SELECTION_CFG_PDEV_ID_M 0x0000ff00
#define HTT_RX_RING_SELECTION_CFG_PDEV_ID_S 8
#define HTT_RX_RING_SELECTION_CFG_PDEV_ID_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PDEV_ID_M) >> \
HTT_RX_RING_SELECTION_CFG_PDEV_ID_S)
#define HTT_RX_RING_SELECTION_CFG_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PDEV_ID_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RING_ID_M 0x00ff0000
#define HTT_RX_RING_SELECTION_CFG_RING_ID_S 16
#define HTT_RX_RING_SELECTION_CFG_RING_ID_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RING_ID_M) >> \
HTT_RX_RING_SELECTION_CFG_RING_ID_S)
#define HTT_RX_RING_SELECTION_CFG_RING_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RING_ID, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RING_ID_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SWAP_M 0x01000000
#define HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SWAP_S 24
#define HTT_RX_RING_SELECTION_CFG_STATUS_TLV_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SWAP_M) >> \
HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SWAP_S)
#define HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SWAP, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_STATUS_TLV_SWAP_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PKT_TLV_SWAP_M 0x02000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TLV_SWAP_S 25
#define HTT_RX_RING_SELECTION_CFG_PKT_TLV_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PKT_TLV_SWAP_M) >> \
HTT_RX_RING_SELECTION_CFG_PKT_TLV_SWAP_S)
#define HTT_RX_RING_SELECTION_CFG_PKT_TLV_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PKT_TLV_SWAP, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PKT_TLV_SWAP_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_OFFSETS_VALID_M 0x04000000
#define HTT_RX_RING_SELECTION_CFG_RX_OFFSETS_VALID_S 26
#define HTT_RX_RING_SELECTION_CFG_RX_OFFSETS_VALID_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_OFFSETS_VALID_M) >> \
HTT_RX_RING_SELECTION_CFG_RX_OFFSETS_VALID_S)
#define HTT_RX_RING_SELECTION_CFG_RX_OFFSETS_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_OFFSETS_VALID, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_OFFSETS_VALID_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_DROP_THRESHOLD_VALID_M 0x08000000
#define HTT_RX_RING_SELECTION_CFG_DROP_THRESHOLD_VALID_S 27
#define HTT_RX_RING_SELECTION_CFG_DROP_THRESHOLD_VALID_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_DROP_THRESHOLD_VALID_M) >> \
HTT_RX_RING_SELECTION_CFG_DROP_THRESHOLD_VALID_S)
#define HTT_RX_RING_SELECTION_CFG_DROP_THRESHOLD_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_DROP_THRESHOLD_VALID, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_DROP_THRESHOLD_VALID_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_MON_GLOBAL_EN_M 0x10000000
#define HTT_RX_RING_SELECTION_CFG_RX_MON_GLOBAL_EN_S 28
#define HTT_RX_RING_SELECTION_CFG_RX_MON_GLOBAL_EN_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_MON_GLOBAL_EN_M) >> \
HTT_RX_RING_SELECTION_CFG_RX_MON_GLOBAL_EN_S)
#define HTT_RX_RING_SELECTION_CFG_RX_MON_GLOBAL_EN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_MON_GLOBAL_EN, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_MON_GLOBAL_EN_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_M 0x20000000
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_S 29
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_M) >> \
HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_S)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_M 0x0000ffff
#define HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_S 0
#define HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_M) >> \
HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_S)
#define HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RING_BUFFER_SIZE_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_MGMT_M 0x00070000
#define HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_MGMT_S 16
#define HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_MGMT_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_MGMT_M) >> \
HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_MGMT_S)
#define HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_MGMT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_MGMT, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_MGMT_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_CTRL_M 0x00380000
#define HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_CTRL_S 19
#define HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_CTRL_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_CTRL_M) >> \
HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_CTRL_S)
#define HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_CTRL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_CTRL, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_CTRL_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_DATA_M 0x01C00000
#define HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_DATA_S 22
#define HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_DATA_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_DATA_M) >> \
HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_DATA_S)
#define HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_DATA_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_DATA, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_CONFIG_LENGTH_DATA_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_HDR_LEN_M 0x06000000
#define HTT_RX_RING_SELECTION_CFG_RX_HDR_LEN_S 25
#define HTT_RX_RING_SELECTION_CFG_RX_HDR_LEN_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_HDR_LEN_M) >> \
HTT_RX_RING_SELECTION_CFG_RX_HDR_LEN_S)
#define HTT_RX_RING_SELECTION_CFG_RX_HDR_LEN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL( HTT_RX_RING_SELECTION_CFG_RX_HDR_LEN, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_HDR_LEN_S));\
} while(0)
#define HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER_M 0x08000000
#define HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER_S 27
#define HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER_M) >> \
HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER_S)
#define HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL( HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER_S));\
} while(0)
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_M 0xffffffff
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_S 0
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_M) >> \
HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_S)
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_M 0xffffffff
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_S 0
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_M) >> \
HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_S)
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_1_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_M 0xffffffff
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_S 0
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_M) >> \
HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_S)
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_2_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_M 0xffffffff
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_S 0
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_M) >> \
HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_S)
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_3_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_M 0xffffffff
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_S 0
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_M) >> \
HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_S)
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_PACKET_OFFSET_M 0x0000ffff
#define HTT_RX_RING_SELECTION_CFG_RX_PACKET_OFFSET_S 0
#define HTT_RX_RING_SELECTION_CFG_RX_PACKET_OFFSET_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_PACKET_OFFSET_M) >> \
HTT_RX_RING_SELECTION_CFG_RX_PACKET_OFFSET_S)
#define HTT_RX_RING_SELECTION_CFG_RX_PACKET_OFFSET_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_PACKET_OFFSET, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_PACKET_OFFSET_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_HEADER_OFFSET_M 0xffff0000
#define HTT_RX_RING_SELECTION_CFG_RX_HEADER_OFFSET_S 16
#define HTT_RX_RING_SELECTION_CFG_RX_HEADER_OFFSET_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_HEADER_OFFSET_M) >> \
HTT_RX_RING_SELECTION_CFG_RX_HEADER_OFFSET_S)
#define HTT_RX_RING_SELECTION_CFG_RX_HEADER_OFFSET_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_HEADER_OFFSET, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_HEADER_OFFSET_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_OFFSET_M 0x0000ffff
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_OFFSET_S 0
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_OFFSET_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_OFFSET_M) >> \
HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_OFFSET_S)
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_OFFSET_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_OFFSET, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_OFFSET_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_OFFSET_M 0xffff0000
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_OFFSET_S 16
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_OFFSET_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_OFFSET_M) >> \
HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_OFFSET_S)
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_OFFSET_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_OFFSET, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_OFFSET_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_OFFSET_M 0x0000ffff
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_OFFSET_S 0
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_OFFSET_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_OFFSET_M) >> \
HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_OFFSET_S)
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_OFFSET_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_OFFSET, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_OFFSET_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_START_OFFSET_M 0xffff0000
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_START_OFFSET_S 16
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_START_OFFSET_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_MSDU_START_OFFSET_M) >> \
HTT_RX_RING_SELECTION_CFG_RX_MSDU_START_OFFSET_S)
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_START_OFFSET_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_MSDU_START_OFFSET, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_MSDU_START_OFFSET_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_ATTENTION_OFFSET_M 0x0000ffff
#define HTT_RX_RING_SELECTION_CFG_RX_ATTENTION_OFFSET_S 0
#define HTT_RX_RING_SELECTION_CFG_RX_ATTENTION_OFFSET_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_ATTENTION_OFFSET_M) >> \
HTT_RX_RING_SELECTION_CFG_RX_ATTENTION_OFFSET_S)
#define HTT_RX_RING_SELECTION_CFG_RX_ATTENTION_OFFSET_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_ATTENTION_OFFSET, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_ATTENTION_OFFSET_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_DROP_THRESHOLD_M 0x000003ff
#define HTT_RX_RING_SELECTION_CFG_RX_DROP_THRESHOLD_S 0
#define HTT_RX_RING_SELECTION_CFG_RX_DROP_THRESHOLD_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_DROP_THRESHOLD_M) >> \
HTT_RX_RING_SELECTION_CFG_RX_DROP_THRESHOLD_S)
#define HTT_RX_RING_SELECTION_CFG_RX_DROP_THRESHOLD_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_DROP_THRESHOLD, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_DROP_THRESHOLD_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_FP_NDP_M 0x00000400
#define HTT_RX_RING_SELECTION_CFG_FP_NDP_S 10
#define HTT_RX_RING_SELECTION_CFG_FP_NDP_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_FP_NDP_M) >> \
HTT_RX_RING_SELECTION_CFG_FP_NDP_S)
#define HTT_RX_RING_SELECTION_CFG_FP_NDP_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_FP_NDP, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_FP_NDP_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_MO_NDP_M 0x00000800
#define HTT_RX_RING_SELECTION_CFG_MO_NDP_S 11
#define HTT_RX_RING_SELECTION_CFG_MO_NDP_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_MO_NDP_M) >> \
HTT_RX_RING_SELECTION_CFG_MO_NDP_S)
#define HTT_RX_RING_SELECTION_CFG_MO_NDP_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_MO_NDP, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_MO_NDP_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_M 0x00001000
#define HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_S 12
#define HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_M) >> \
HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_S)
#define HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_SRC_M 0x00006000
#define HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_SRC_S 13
#define HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_SRC_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_SRC_M) >> \
HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_SRC_S)
#define HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_SRC_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_SRC, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_SRC_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_DEST_M 0x00018000
#define HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_DEST_S 15
#define HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_DEST_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_DEST_M) >> \
HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_DEST_S)
#define HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_DEST_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_DEST, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_FP_PHY_ERR_BUF_DEST_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_MSDU_MPDU_LOGGING_M 0x000E0000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_MSDU_MPDU_LOGGING_S 17
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_MSDU_MPDU_LOGGING_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_MSDU_MPDU_LOGGING_M) >> \
HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_MSDU_MPDU_LOGGING_S)
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_MSDU_MPDU_LOGGING_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_MSDU_MPDU_LOGGING, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_MSDU_MPDU_LOGGING_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_DMA_MPDU_MGMT_M 0x00100000
#define HTT_RX_RING_SELECTION_CFG_DMA_MPDU_MGMT_S 20
#define HTT_RX_RING_SELECTION_CFG_DMA_MPDU_MGMT_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_DMA_MPDU_MGMT_M) >> \
HTT_RX_RING_SELECTION_CFG_DMA_MPDU_MGMT_S)
#define HTT_RX_RING_SELECTION_CFG_DMA_MPDU_MGMT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_DMA_MPDU_MGMT, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_DMA_MPDU_MGMT_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_DMA_MPDU_CTRL_M 0x00200000
#define HTT_RX_RING_SELECTION_CFG_DMA_MPDU_CTRL_S 21
#define HTT_RX_RING_SELECTION_CFG_DMA_MPDU_CTRL_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_DMA_MPDU_CTRL_M) >> \
HTT_RX_RING_SELECTION_CFG_DMA_MPDU_CTRL_S)
#define HTT_RX_RING_SELECTION_CFG_DMA_MPDU_CTRL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_DMA_MPDU_CTRL, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_DMA_MPDU_CTRL_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_DMA_MPDU_DATA_M 0x00400000
#define HTT_RX_RING_SELECTION_CFG_DMA_MPDU_DATA_S 22
#define HTT_RX_RING_SELECTION_CFG_DMA_MPDU_DATA_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_DMA_MPDU_DATA_M) >> \
HTT_RX_RING_SELECTION_CFG_DMA_MPDU_DATA_S)
#define HTT_RX_RING_SELECTION_CFG_DMA_MPDU_DATA_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_DMA_MPDU_DATA, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_DMA_MPDU_DATA_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_WORD_MASK_COMPACTION_ENABLE_M 0x00800000
#define HTT_RX_RING_SELECTION_CFG_WORD_MASK_COMPACTION_ENABLE_S 23
#define HTT_RX_RING_SELECTION_CFG_WORD_MASK_COMPACTION_ENABLE_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_WORD_MASK_COMPACTION_ENABLE_M) >> \
HTT_RX_RING_SELECTION_CFG_WORD_MASK_COMPACTION_ENABLE_S)
#define HTT_RX_RING_SELECTION_CFG_WORD_MASK_COMPACTION_ENABLE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_WORD_MASK_COMPACTION_ENABLE, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_WORD_MASK_COMPACTION_ENABLE_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_ENABLE_M 0x01000000
#define HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_ENABLE_S 24
#define HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_ENABLE_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_ENABLE_M) >> \
HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_ENABLE_S)
#define HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_ENABLE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_ENABLE, _val);\
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_ENABLE_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_VALUE_M 0x1E000000
#define HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_VALUE_S 25
#define HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_VALUE_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_VALUE_M) >> \
HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_VALUE_S)
#define HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_VALUE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_VALUE, _val);\
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RBM_OVERRIDE_VALUE_S));\
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_M 0xffffffff
#define HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_S 0
#define HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_M) >> \
HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_S)
#define HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_CONT_M 0xffffffff
#define HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_CONT_S 0
#define HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_CONT_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_CONT_M) >> \
HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_CONT_S)
#define HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_CONT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_CONT, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PHY_ERR_MASK_CONT_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_M 0x0000FFFF
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_S 0
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_M)>> \
HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_S)
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK, _val);\
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_M 0x00070000
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_S 16
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_M)>> \
HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_S)
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK, _val);\
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_M 0x0001FFFF
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_S 0
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_M)>> \
HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_S)
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK, _val);\
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_ENABLE_RX_PKT_TLV_OFFSET_M 0x00000001
#define HTT_RX_RING_SELECTION_CFG_ENABLE_RX_PKT_TLV_OFFSET_S 0
#define HTT_RX_RING_SELECTION_CFG_ENABLE_RX_PKT_TLV_OFFSET_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_ENABLE_RX_PKT_TLV_OFFSET_M)>> \
HTT_RX_RING_SELECTION_CFG_ENABLE_RX_PKT_TLV_OFFSET_S)
#define HTT_RX_RING_SELECTION_CFG_ENABLE_RX_PKT_TLV_OFFSET_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_ENABLE_RX_PKT_TLV_OFFSET, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_ENABLE_RX_PKT_TLV_OFFSET_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_PKT_TLV_OFFSET_M 0x0000FFFE
#define HTT_RX_RING_SELECTION_CFG_RX_PKT_TLV_OFFSET_S 1
#define HTT_RX_RING_SELECTION_CFG_RX_PKT_TLV_OFFSET_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_PKT_TLV_OFFSET_M)>> \
HTT_RX_RING_SELECTION_CFG_RX_PKT_TLV_OFFSET_S)
#define HTT_RX_RING_SELECTION_CFG_RX_PKT_TLV_OFFSET_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_PKT_TLV_OFFSET, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_PKT_TLV_OFFSET_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_V2_M 0x000FFFFF
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_V2_S 0
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_V2_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_V2_M)>> \
HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_V2_S)
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_V2_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_V2, _val);\
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_MPDU_START_WORD_MASK_V2_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_V2_M 0x0FF00000
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_V2_S 20
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_V2_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_V2_M)>> \
HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_V2_S)
#define HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_V2_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_V2, _val);\
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_MPDU_END_WORD_MASK_V2_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_V2_M 0x000FFFFF
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_V2_S 0
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_V2_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_V2_M)>> \
HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_V2_S)
#define HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_V2_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_V2, _val);\
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_MSDU_END_WORD_MASK_V2_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_RX_PPDU_END_USR_STATS_WORD_MASK_V2_M 0x000FFFFF
#define HTT_RX_RING_SELECTION_CFG_RX_PPDU_END_USR_STATS_WORD_MASK_V2_S 0
#define HTT_RX_RING_SELECTION_CFG_RX_PPDU_END_USR_STATS_WORD_MASK_V2_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_RX_PPDU_END_USR_STATS_WORD_MASK_V2_M)>> \
HTT_RX_RING_SELECTION_CFG_RX_PPDU_END_USR_STATS_WORD_MASK_V2_S)
#define HTT_RX_RING_SELECTION_CFG_RX_PPDU_END_USR_STATS_WORD_MASK_V2_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_RX_PPDU_END_USR_STATS_WORD_MASK_V2, _val);\
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_PPDU_END_USR_STATS_WORD_MASK_V2_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS0_M 0xFFFFFFFF
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS0_S 0
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS0_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS0_M)>> \
HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS0_S)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS0_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS0, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS0_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS1_M 0xFFFFFFFF
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS1_S 0
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS1_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS1_M)>> \
HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS1_S)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS1_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS1, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_FPMO_FLAGS1_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_0_M 0xffffffff
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_0_S 0
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_0_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_0_M) >> \
HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_0_S)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_0_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_0, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_0_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_1_M 0xffffffff
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_1_S 0
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_1_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_1_M) >> \
HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_1_S)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_1_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_1, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_1_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_2_M 0xffffffff
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_2_S 0
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_2_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_2_M) >> \
HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_2_S)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_2_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_2, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_2_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_3_M 0xffffffff
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_3_S 0
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_3_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_3_M) >> \
HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_3_S)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_3_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_3, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FLAG_3_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS0_M 0xFFFFFFFF
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS0_S 0
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS0_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS0_M)>> \
HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS0_S)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS0_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS0, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS0_S)); \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS1_M 0xFFFFFFFF
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS1_S 0
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS1_GET(_var) \
(((_var) & HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS1_M)>> \
HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS1_S)
#define HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS1_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS1, _val); \
((_var) |= ((_val) << HTT_RX_RING_SELECTION_CFG_PACKET_TYPE_ENABLE_DATA_FPMO_FLAGS1_S)); \
} while (0)
/*
* Subtype based MGMT frames enable bits.
* FP: Filter_Pass, MD: Monitor_Direct MO: Monitor_Other
*/
/* association request */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0000_M 0x00000001
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0000_S 0
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0000_M 0x00000002
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0000_S 1
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0000_M 0x00000004
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0000_S 2
/* association response */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0001_M 0x00000008
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0001_S 3
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0001_M 0x00000010
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0001_S 4
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0001_M 0x00000020
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0001_S 5
/* Reassociation request */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0010_M 0x00000040
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0010_S 6
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0010_M 0x00000080
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0010_S 7
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0010_M 0x00000100
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0010_S 8
/* Reassociation response */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0011_M 0x00000200
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0011_S 9
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0011_M 0x00000400
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0011_S 10
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0011_M 0x00000800
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0011_S 11
/* Probe request */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0100_M 0x00001000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0100_S 12
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0100_M 0x00002000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0100_S 13
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0100_M 0x00004000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0100_S 14
/* Probe response */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0101_M 0x00008000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0101_S 15
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0101_M 0x00010000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0101_S 16
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0101_M 0x00020000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0101_S 17
/* Timing Advertisement */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0110_M 0x00040000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0110_S 18
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0110_M 0x00080000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0110_S 19
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0110_M 0x00100000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0110_S 20
/* Reserved */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0111_M 0x00200000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_0111_S 21
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0111_M 0x00400000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_0111_S 22
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0111_M 0x00800000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_0111_S 23
/* Beacon */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_1000_M 0x01000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_1000_S 24
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_1000_M 0x02000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_1000_S 25
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_1000_M 0x04000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_1000_S 26
/* ATIM */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_1001_M 0x08000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FP_MGMT_1001_S 27
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_1001_M 0x10000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MD_MGMT_1001_S 28
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_1001_M 0x20000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_MO_MGMT_1001_S 29
/* Disassociation */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1010_M 0x00000001
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1010_S 0
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1010_M 0x00000002
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1010_S 1
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1010_M 0x00000004
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1010_S 2
/* Authentication */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1011_M 0x00000008
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1011_S 3
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1011_M 0x00000010
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1011_S 4
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1011_M 0x00000020
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1011_S 5
/* Deauthentication */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1100_M 0x00000040
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1100_S 6
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1100_M 0x00000080
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1100_S 7
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1100_M 0x00000100
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1100_S 8
/* Action */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1101_M 0x00000200
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1101_S 9
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1101_M 0x00000400
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1101_S 10
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1101_M 0x00000800
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1101_S 11
/* Action No Ack */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1110_M 0x00001000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1110_S 12
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1110_M 0x00002000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1110_S 13
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1110_M 0x00004000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1110_S 14
/* Reserved */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1111_M 0x00008000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FP_MGMT_1111_S 15
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1111_M 0x00010000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MD_MGMT_1111_S 16
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1111_M 0x00020000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_MO_MGMT_1111_S 17
/*
* Subtype based CTRL frames enable bits.
* FP: Filter_Pass, MD: Monitor_Direct, MO: Monitor_Other
*/
/* Reserved */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0000_M 0x00000001
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0000_S 0
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0000_M 0x00000002
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0000_S 1
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0000_M 0x00000004
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0000_S 2
/* Reserved */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0001_M 0x00000008
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0001_S 3
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0001_M 0x00000010
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0001_S 4
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0001_M 0x00000020
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0001_S 5
/* Reserved */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0010_M 0x00000040
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0010_S 6
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0010_M 0x00000080
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0010_S 7
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0010_M 0x00000100
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0010_S 8
/* Reserved */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0011_M 0x00000200
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0011_S 9
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0011_M 0x00000400
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0011_S 10
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0011_M 0x00000800
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0011_S 11
/* Reserved */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0100_M 0x00001000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0100_S 12
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0100_M 0x00002000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0100_S 13
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0100_M 0x00004000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0100_S 14
/* Reserved */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0101_M 0x00008000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0101_S 15
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0101_M 0x00010000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0101_S 16
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0101_M 0x00020000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0101_S 17
/* Reserved */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0110_M 0x00040000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0110_S 18
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0110_M 0x00080000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0110_S 19
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0110_M 0x00100000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0110_S 20
/* Control Wrapper */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0111_M 0x00200000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_0111_S 21
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0111_M 0x00400000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_0111_S 22
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0111_M 0x00800000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_0111_S 23
/* Block Ack Request */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_1000_M 0x01000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_1000_S 24
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_1000_M 0x02000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_1000_S 25
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_1000_M 0x04000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_1000_S 26
/* Block Ack*/
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_1001_M 0x08000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_FP_CTRL_1001_S 27
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_1001_M 0x10000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MD_CTRL_1001_S 28
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_1001_M 0x20000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG2_MO_CTRL_1001_S 29
/* PS-POLL */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1010_M 0x00000001
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1010_S 0
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1010_M 0x00000002
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1010_S 1
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1010_M 0x00000004
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1010_S 2
/* RTS */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1011_M 0x00000008
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1011_S 3
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1011_M 0x00000010
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1011_S 4
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1011_M 0x00000020
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1011_S 5
/* CTS */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1100_M 0x00000040
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1100_S 6
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1100_M 0x00000080
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1100_S 7
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1100_M 0x00000100
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1100_S 8
/* ACK */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1101_M 0x00000200
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1101_S 9
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1101_M 0x00000400
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1101_S 10
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1101_M 0x00000800
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1101_S 11
/* CF-END */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1110_M 0x00001000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1110_S 12
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1110_M 0x00002000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1110_S 13
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1110_M 0x00004000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1110_S 14
/* CF-END + CF-ACK */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1111_M 0x00008000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_CTRL_1111_S 15
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1111_M 0x00010000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_CTRL_1111_S 16
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1111_M 0x00020000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_CTRL_1111_S 17
/* Multicast data */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_DATA_MCAST_M 0x00040000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_DATA_MCAST_S 18
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_DATA_MCAST_M 0x00080000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_DATA_MCAST_S 19
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_DATA_MCAST_M 0x00100000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_DATA_MCAST_S 20
/* Unicast data */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_DATA_UCAST_M 0x00200000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_DATA_UCAST_S 21
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_DATA_UCAST_M 0x00400000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_DATA_UCAST_S 22
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_DATA_UCAST_M 0x00800000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_DATA_UCAST_S 23
/* NULL data */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_DATA_NULL_M 0x01000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_FP_DATA_NULL_S 24
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_DATA_NULL_M 0x02000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MD_DATA_NULL_S 25
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_DATA_NULL_M 0x04000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG3_MO_DATA_NULL_S 26
/* FPMO mode flags */
/* MGMT */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0000_M 0x00000001
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0000_S 0
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0001_M 0x00000002
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0001_S 1
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0010_M 0x00000004
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0010_S 2
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0011_M 0x00000008
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0011_S 3
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0100_M 0x00000010
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0100_S 4
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0101_M 0x00000020
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0101_S 5
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0110_M 0x00000040
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0110_S 6
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0111_M 0x00000080
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_0111_S 7
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1000_M 0x00000100
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1000_S 8
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1001_M 0x00000200
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1001_S 9
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1010_M 0x00000400
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1010_S 10
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1011_M 0x00000800
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1011_S 11
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1100_M 0x00001000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1100_S 12
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1101_M 0x00002000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1101_S 13
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1110_M 0x00004000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1110_S 14
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1111_M 0x00008000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_MGMT_1111_S 15
/* CTRL */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0000_M 0x00010000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0000_S 16
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0001_M 0x00020000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0001_S 17
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0010_M 0x00040000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0010_S 18
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0011_M 0x00080000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0011_S 19
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0100_M 0x00100000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0100_S 20
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0101_M 0x00200000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0101_S 21
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0110_M 0x00400000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0110_S 22
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0111_M 0x00800000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_0111_S 23
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1000_M 0x01000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1000_S 24
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1001_M 0x02000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1001_S 25
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1010_M 0x04000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1010_S 26
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1011_M 0x08000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1011_S 27
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1100_M 0x10000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1100_S 28
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1101_M 0x20000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1101_S 29
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1110_M 0x40000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1110_S 30
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1111_M 0x80000000
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG0_FPMO_CTRL_1111_S 31
/* DATA */
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FPMO_DATA_MCAST_M 0x00000001
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FPMO_DATA_MCAST_S 0
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FPMO_DATA_UCAST_M 0x00000002
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FPMO_DATA_UCAST_S 1
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FPMO_DATA_NULL_M 0x00000004
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FPMO_DATA_NULL_S 2
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FPMO_DATA_QOS_NULL_DATA_M 0x00000008
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FPMO_DATA_QOS_NULL_DATA_S 3
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FPMO_DATA_QOS_NULL_TB_M 0x00000010
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG1_FPMO_DATA_QOS_NULL_TB_S 4
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_SET(word, httsym, value) \
do { \
HTT_CHECK_SET_VAL(httsym, value); \
(word) |= (value) << httsym##_S; \
} while (0)
#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_GET(word, httsym) \
(((word) & httsym##_M) >> httsym##_S)
#define htt_rx_ring_pkt_enable_subtype_set( \
word, flag, mode, type, subtype, val) \
HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_SET( \
word, HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_##flag##_##mode##_##type##_##subtype, val)
#define htt_rx_ring_pkt_enable_subtype_get( \
word, flag, mode, type, subtype) \
HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_GET( \
word, HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_##flag##_##mode##_##type##_##subtype)
/* Definition to filter in TLVs */
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MPDU_START_M 0x00000001
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MPDU_START_S 0
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MSDU_START_M 0x00000002
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MSDU_START_S 1
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PACKET_M 0x00000004
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PACKET_S 2
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MSDU_END_M 0x00000008
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MSDU_END_S 3
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MPDU_END_M 0x00000010
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_MPDU_END_S 4
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PACKET_HEADER_M 0x00000020
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PACKET_HEADER_S 5
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_RESERVED_M 0x00000040
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_RESERVED_S 6
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_ATTENTION_M 0x00000080
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_ATTENTION_S 7
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_START_M 0x00000100
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_START_S 8
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_M 0x00000200
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_S 9
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_USER_STATS_M 0x00000400
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_USER_STATS_S 10
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_USER_STATS_EXT_M 0x00000800
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_USER_STATS_EXT_S 11
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_STATUS_DONE_M 0x00001000
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_END_STATUS_DONE_S 12
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_START_USER_INFO_M 0x00002000
#define HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_PPDU_START_USER_INFO_S 13
#define HTT_RX_RING_TLV_ENABLE_SET(word, httsym, enable) \
do { \
HTT_CHECK_SET_VAL(httsym, enable); \
(word) |= (enable) << httsym##_S; \
} while (0)
#define HTT_RX_RING_TLV_ENABLE_GET(word, httsym) \
(((word) & httsym##_M) >> httsym##_S)
#define htt_rx_ring_tlv_filter_in_enable_set(word, tlv, enable) \
HTT_RX_RING_TLV_ENABLE_SET( \
word, HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_##tlv, enable)
#define htt_rx_ring_tlv_filter_in_enable_get(word, tlv) \
HTT_RX_RING_TLV_ENABLE_GET( \
word, HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_##tlv)
/**
* @brief host -> target TX monitor config message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_TX_MONITOR_CFG
*
* @details
* HTT_H2T_MSG_TYPE_TX_MONITOR_CFG message is sent by host to
* configure RXDMA rings.
* The configuration is per ring based and includes both packet types
* and PPDU/MPDU TLVs.
*
* The message would appear as follows:
*
* |31 28|27|26|25|24|23 22|21|20|19|18 16|15|14|13|12|11|10|9|8|7|6|5|4|3|2 0|
* |-----+--+--+--+--+-----+--+--+--+-----+--+--+--+--+--+--+-+-+-+-+-+-+-+----|
* |rsvd1|MF|TM|PS|SS| ring_id | pdev_id | msg_type |
* |--------------+--------+--------+-----+------------------------------------|
* | rsvd2 | DATA | CTRL | MGMT| ring_buffer_size |
* |-----------------------------------------+--+--+--+--+--+-+-+-+-+-+-+-+----|
* | | M| M| M| M| M|M|M|M|M|M|M|M| |
* | | S| S| S| P| P|P|S|S|S|P|P|P| |
* | | E| E| E| E| E|E|S|S|S|S|S|S| |
* | rsvd3 | D| C| M| D| C|M|D|C|M|D|C|M| E |
* |---------------------------------------------------------------------------|
* | tlv_filter_mask_in0 |
* |---------------------------------------------------------------------------|
* | tlv_filter_mask_in1 |
* |---------------------------------------------------------------------------|
* | tlv_filter_mask_in2 |
* |---------------------------------------------------------------------------|
* | tlv_filter_mask_in3 |
* |--------------------+-----------------+---------------------+--------------|
* | tx_msdu_start_wm | tx_queue_ext_wm | tx_peer_entry_wm |tx_fes_stup_wm|
* |---------------------------------------------------------------------------|
* | pcu_ppdu_setup_word_mask |
* |-----------------------+--+--+--+-----+---------------------+--------------|
* | rsvd4 | D| C| M| PT | rxpcu_usrsetp_wm |tx_mpdu_srt_wm|
* |---------------------------------------------------------------------------|
*
* Where:
* MF = MAC address filtering enable
* TM = tx monitor global enable
* PS = pkt_swap
* SS = status_swap
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to
* 0x1b (HTT_H2T_MSG_TYPE_TX_MONITOR_CFG)
* b'8:15 - pdev_id:
* 0 (for rings at SOC level),
* 1/2/3 mac id (for rings at LMAC level)
* b'16:23 - ring_id : Identify the ring to configure.
* More details can be got from enum htt_srng_ring_id
* b'24 - status_swap (SS): 1 is to swap status TLV - refer to
* BUF_RING_CFG_0 defs within HW .h files,
* e.g. wmac_top_reg_seq_hwioreg.h
* b'25 - pkt_swap (PS): 1 is to swap packet TLV - refer to
* BUF_RING_CFG_0 defs within HW .h files,
* e.g. wmac_top_reg_seq_hwioreg.h
* b'26 - tx_mon_global_en: Enable/Disable global register
* configuration in Tx monitor module.
* b'27 - mac_addr_filter_en:
* Enable/Disable Mac Address based filter.
* b'28:31 - rsvd1: reserved for future use
* dword1 - b'0:15 - ring_buffer_size: size of bufferes referenced by rx ring,
* in byte units.
* Valid only for HW_TO_SW_RING and SW_TO_HW_RING
* b'16:18 - config_length_mgmt(MGMT) for MGMT: Each bit set represent
* 64, 128, 256.
* If all 3 bits are set config length is > 256.
* if val is '0', then ignore this field.
* b'19:21 - config_length_ctrl(CTRL) for CTRL: Each bit set represent
* 64, 128, 256.
* If all 3 bits are set config length is > 256.
* if val is '0', then ignore this field.
* b'22:24 - config_length_data(DATA) for DATA: Each bit set represent
* 64, 128, 256.
* If all 3 bits are set config length is > 256.
* If val is '0', then ignore this field.
* - b'25:31 - rsvd2: Reserved for future use
* dword2 - b'0:2 - packet_type_enable_flags(E): MGMT, CTRL, DATA
* b'3 - filter_in_tx_mpdu_start_mgmt(MPSM):
* If packet_type_enable_flags is '1' for MGMT type,
* monitor will ignore this bit and allow this TLV.
* If packet_type_enable_flags is '0' for MGMT type,
* monitor will use this bit to enable/disable logging
* of this TLV.
* b'4 - filter_in_tx_mpdu_start_ctrl(MPSC)
* If packet_type_enable_flags is '1' for CTRL type,
* monitor will ignore this bit and allow this TLV.
* If packet_type_enable_flags is '0' for CTRL type,
* monitor will use this bit to enable/disable logging
* of this TLV.
* b'5 - filter_in_tx_mpdu_start_data(MPSD)
* If packet_type_enable_flags is '1' for DATA type,
* monitor will ignore this bit and allow this TLV.
* If packet_type_enable_flags is '0' for DATA type,
* monitor will use this bit to enable/disable logging
* of this TLV.
* b'6 - filter_in_tx_msdu_start_mgmt(MSSM)
* If packet_type_enable_flags is '1' for MGMT type,
* monitor will ignore this bit and allow this TLV.
* If packet_type_enable_flags is '0' for MGMT type,
* monitor will use this bit to enable/disable logging
* of this TLV.
* b'7 - filter_in_tx_msdu_start_ctrl(MSSC)
* If packet_type_enable_flags is '1' for CTRL type,
* monitor will ignore this bit and allow this TLV.
* If packet_type_enable_flags is '0' for CTRL type,
* monitor will use this bit to enable/disable logging
* of this TLV.
* b'8 - filter_in_tx_msdu_start_data(MSSD)
* If packet_type_enable_flags is '1' for DATA type,
* monitor will ignore this bit and allow this TLV.
* If packet_type_enable_flags is '0' for DATA type,
* monitor will use this bit to enable/disable logging
* of this TLV.
* b'9 - filter_in_tx_mpdu_end_mgmt(MPEM)
* If packet_type_enable_flags is '1' for MGMT type,
* monitor will ignore this bit and allow this TLV.
* If packet_type_enable_flags is '0' for MGMT type,
* monitor will use this bit to enable/disable logging
* of this TLV.
* If filter_in_TX_MPDU_START = 1 it is recommended
* to set this bit.
* b'10 - filter_in_tx_mpdu_end_ctrl(MPEC)
* If packet_type_enable_flags is '1' for CTRL type,
* monitor will ignore this bit and allow this TLV.
* If packet_type_enable_flags is '0' for CTRL type,
* monitor will use this bit to enable/disable logging
* of this TLV.
* If filter_in_TX_MPDU_START = 1 it is recommended
* to set this bit.
* b'11 - filter_in_tx_mpdu_end_data(MPED)
* If packet_type_enable_flags is '1' for DATA type,
* monitor will ignore this bit and allow this TLV.
* If packet_type_enable_flags is '0' for DATA type,
* monitor will use this bit to enable/disable logging
* of this TLV.
* If filter_in_TX_MPDU_START = 1 it is recommended
* to set this bit.
* b'12 - filter_in_tx_msdu_end_mgmt(MSEM)
* If packet_type_enable_flags is '1' for MGMT type,
* monitor will ignore this bit and allow this TLV.
* If packet_type_enable_flags is '0' for MGMT type,
* monitor will use this bit to enable/disable logging
* of this TLV.
* If filter_in_TX_MSDU_START = 1 it is recommended
* to set this bit.
* b'13 - filter_in_tx_msdu_end_ctrl(MSEC)
* If packet_type_enable_flags is '1' for CTRL type,
* monitor will ignore this bit and allow this TLV.
* If packet_type_enable_flags is '0' for CTRL type,
* monitor will use this bit to enable/disable logging
* of this TLV.
* If filter_in_TX_MSDU_START = 1 it is recommended
* to set this bit.
* b'14 - filter_in_tx_msdu_end_data(MSED)
* If packet_type_enable_flags is '1' for DATA type,
* monitor will ignore this bit and allow this TLV.
* If packet_type_enable_flags is '0' for DATA type,
* monitor will use this bit to enable/disable logging
* of this TLV.
* If filter_in_TX_MSDU_START = 1 it is recommended
* to set this bit.
* b'15:31 - rsvd3: Reserved for future use
* dword3 - b'0:31 - tlv_filter_mask_in0:
* dword4 - b'0:31 - tlv_filter_mask_in1:
* dword5 - b'0:31 - tlv_filter_mask_in2:
* dword6 - b'0:31 - tlv_filter_mask_in3:
* dword7 - b'0:7 - tx_fes_setup_word_mask:
* - b'8:15 - tx_peer_entry_word_mask:
* - b'16:23 - tx_queue_ext_word_mask:
* - b'24:31 - tx_msdu_start_word_mask:
* dword8 - b'0:31 - pcu_ppdu_setup_word_mask:
* dword9 - b'0:7 - tx_mpdu_start_word_mask:
* - b'8:15 - rxpcu_user_setup_word_mask:
* - b'16:18 - pkt_type_enable_msdu_or_mpdu_logging (PT):
* MGMT, CTRL, DATA
* - b'19 - dma_mpdu_mgmt(M): For MGMT
* 0 -> MSDU level logging is enabled
* (valid only if bit is set in
* pkt_type_enable_msdu_or_mpdu_logging)
* 1 -> MPDU level logging is enabled
* (valid only if bit is set in
* pkt_type_enable_msdu_or_mpdu_logging)
* - b'20 - dma_mpdu_ctrl(C) : For CTRL
* 0 -> MSDU level logging is enabled
* (valid only if bit is set in
* pkt_type_enable_msdu_or_mpdu_logging)
* 1 -> MPDU level logging is enabled
* (valid only if bit is set in
* pkt_type_enable_msdu_or_mpdu_logging)
* - b'21 - dma_mpdu_data(D) : For DATA
* 0 -> MSDU level logging is enabled
* (valid only if bit is set in
* pkt_type_enable_msdu_or_mpdu_logging)
* 1 -> MPDU level logging is enabled
* (valid only if bit is set in
* pkt_type_enable_msdu_or_mpdu_logging)
* - b'22:31 - rsvd4 for future use
*/
PREPACK struct htt_tx_monitor_cfg_t {
A_UINT32 msg_type: 8,
pdev_id: 8,
ring_id: 8,
status_swap: 1,
pkt_swap: 1,
tx_mon_global_en: 1,
mac_addr_filter_en: 1,
rsvd1: 4;
A_UINT32 ring_buffer_size: 16,
config_length_mgmt: 3,
config_length_ctrl: 3,
config_length_data: 3,
rsvd2: 7;
A_UINT32 pkt_type_enable_flags: 3,
filter_in_tx_mpdu_start_mgmt: 1,
filter_in_tx_mpdu_start_ctrl: 1,
filter_in_tx_mpdu_start_data: 1,
filter_in_tx_msdu_start_mgmt: 1,
filter_in_tx_msdu_start_ctrl: 1,
filter_in_tx_msdu_start_data: 1,
filter_in_tx_mpdu_end_mgmt: 1,
filter_in_tx_mpdu_end_ctrl: 1,
filter_in_tx_mpdu_end_data: 1,
filter_in_tx_msdu_end_mgmt: 1,
filter_in_tx_msdu_end_ctrl: 1,
filter_in_tx_msdu_end_data: 1,
word_mask_compaction_enable: 1,
rsvd3: 16;
A_UINT32 tlv_filter_mask_in0;
A_UINT32 tlv_filter_mask_in1;
A_UINT32 tlv_filter_mask_in2;
A_UINT32 tlv_filter_mask_in3;
A_UINT32 tx_fes_setup_word_mask: 8,
tx_peer_entry_word_mask: 8,
tx_queue_ext_word_mask: 8,
tx_msdu_start_word_mask: 8;
A_UINT32 pcu_ppdu_setup_word_mask;
A_UINT32 tx_mpdu_start_word_mask: 8,
rxpcu_user_setup_word_mask: 8,
pkt_type_enable_msdu_or_mpdu_logging: 3,
dma_mpdu_mgmt: 1,
dma_mpdu_ctrl: 1,
dma_mpdu_data: 1,
rsvd4: 10;
A_UINT32 tx_queue_ext_v2_word_mask: 12,
tx_peer_entry_v2_word_mask: 12,
rsvd5: 8;
A_UINT32 fes_status_end_word_mask: 16,
response_end_status_word_mask: 16;
A_UINT32 fes_status_prot_word_mask: 11,
rsvd6: 21;
} POSTPACK;
#define HTT_TX_MONITOR_CFG_SZ (sizeof(struct htt_tx_monitor_cfg_t))
#define HTT_TX_MONITOR_CFG_PDEV_ID_M 0x0000ff00
#define HTT_TX_MONITOR_CFG_PDEV_ID_S 8
#define HTT_TX_MONITOR_CFG_PDEV_ID_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_PDEV_ID_M) >> \
HTT_TX_MONITOR_CFG_PDEV_ID_S)
#define HTT_TX_MONITOR_CFG_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_PDEV_ID_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_RING_ID_M 0x00ff0000
#define HTT_TX_MONITOR_CFG_RING_ID_S 16
#define HTT_TX_MONITOR_CFG_RING_ID_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_RING_ID_M) >> \
HTT_TX_MONITOR_CFG_RING_ID_S)
#define HTT_TX_MONITOR_CFG_RING_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_RING_ID, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_RING_ID_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_STATUS_SWAP_M 0x01000000
#define HTT_TX_MONITOR_CFG_STATUS_SWAP_S 24
#define HTT_TX_MONITOR_CFG_STATUS_TLV_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_STATUS_SWAP_M) >> \
HTT_TX_MONITOR_CFG_STATUS_SWAP_S)
#define HTT_TX_MONITOR_CFG_STATUS_TLV_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_STATUS_SWAP, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_STATUS_SWAP_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_PKT_SWAP_M 0x02000000
#define HTT_TX_MONITOR_CFG_PKT_SWAP_S 25
#define HTT_TX_MONITOR_CFG_PKT_TLV_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_PKT_SWAP_M) >> \
HTT_TX_MONITOR_CFG_PKT_SWAP_S)
#define HTT_TX_MONITOR_CFG_PKT_TLV_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_PKT_SWAP, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_PKT_SWAP_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_TX_MON_GLOBAL_EN_M 0x04000000
#define HTT_TX_MONITOR_CFG_TX_MON_GLOBAL_EN_S 26
#define HTT_TX_MONITOR_CFG_TX_MON_GLOBAL_EN_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_TX_MON_GLOBAL_EN_M) >> \
HTT_TX_MONITOR_CFG_TX_MON_GLOBAL_EN_S)
#define HTT_TX_MONITOR_CFG_TX_MON_GLOBAL_EN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_TX_MON_GLOBAL_EN, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_TX_MON_GLOBAL_EN_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_MAC_ADDR_FILTER_EN_M 0x08000000
#define HTT_TX_MONITOR_CFG_MAC_ADDR_FILTER_EN_S 27
#define HTT_TX_MONITOR_CFG_MAC_ADDR_FILTER_EN_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_MAC_ADDR_FILTER_EN_M) >> \
HTT_TX_MONITOR_CFG_MAC_ADDR_FILTER_EN_S)
#define HTT_TX_MONITOR_CFG_MAC_ADDR_FILTER_EN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_MAC_ADDR_FILTER_EN, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_MAC_ADDR_FILTER_EN_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_RING_BUFFER_SIZE_M 0x0000ffff
#define HTT_TX_MONITOR_CFG_RING_BUFFER_SIZE_S 0
#define HTT_TX_MONITOR_CFG_RING_BUFFER_SIZE_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_RING_BUFFER_SIZE_M) >> \
HTT_TX_MONITOR_CFG_RING_BUFFER_SIZE_S)
#define HTT_TX_MONITOR_CFG_RING_BUFFER_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_RING_BUFFER_SIZE, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_RING_BUFFER_SIZE_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_CONFIG_LENGTH_MGMT_M 0x00070000
#define HTT_TX_MONITOR_CFG_CONFIG_LENGTH_MGMT_S 16
#define HTT_TX_MONITOR_CFG_CONFIG_LENGTH_MGMT_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_CONFIG_LENGTH_MGMT_M) >> \
HTT_TX_MONITOR_CFG_CONFIG_LENGTH_MGMT_S)
#define HTT_TX_MONITOR_CFG_CONFIG_LENGTH_MGMT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_CONFIG_LENGTH_MGMT, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_CONFIG_LENGTH_MGMT_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_CONFIG_LENGTH_CTRL_M 0x00380000
#define HTT_TX_MONITOR_CFG_CONFIG_LENGTH_CTRL_S 19
#define HTT_TX_MONITOR_CFG_CONFIG_LENGTH_CTRL_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_CONFIG_LENGTH_CTRL_M) >> \
HTT_TX_MONITOR_CFG_CONFIG_LENGTH_CTRL_S)
#define HTT_TX_MONITOR_CFG_CONFIG_LENGTH_CTRL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_CONFIG_LENGTH_CTRL, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_CONFIG_LENGTH_CTRL_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_CONFIG_LENGTH_DATA_M 0x01C00000
#define HTT_TX_MONITOR_CFG_CONFIG_LENGTH_DATA_S 22
#define HTT_TX_MONITOR_CFG_CONFIG_LENGTH_DATA_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_CONFIG_LENGTH_DATA_M) >> \
HTT_TX_MONITOR_CFG_CONFIG_LENGTH_DATA_S)
#define HTT_TX_MONITOR_CFG_CONFIG_LENGTH_DATA_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_CONFIG_LENGTH_DATA, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_CONFIG_LENGTH_DATA_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_M 0x00000007
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_S 0
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_M) >> \
HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_S)
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_MGMT_M 0x00000008
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_MGMT_S 3
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_MGMT_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_MGMT_M) >> \
HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_MGMT_S)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_MGMT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_MGMT, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_MGMT_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_CTRL_M 0x00000010
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_CTRL_S 4
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_CTRL_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_CTRL_M) >> \
HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_CTRL_S)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_CTRL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_CTRL, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_CTRL_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_DATA_M 0x00000020
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_DATA_S 5
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_DATA_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_DATA_M) >> \
HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_DATA_S)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_DATA_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_DATA, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_START_DATA_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_MGMT_M 0x00000040
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_MGMT_S 6
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_MGMT_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_MGMT_M) >> \
HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_MGMT_S)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_MGMT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_MGMT, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_MGMT_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_CTRL_M 0x00000080
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_CTRL_S 7
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_CTRL_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_CTRL_M) >> \
HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_CTRL_S)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_CTRL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_CTRL, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_CTRL_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_DATA_M 0x00000100
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_DATA_S 8
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_DATA_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_DATA_M) >> \
HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_DATA_S)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_DATA_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_DATA, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_START_DATA_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_MGMT_M 0x00000200
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_MGMT_S 9
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_MGMT_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_MGMT_M) >> \
HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_MGMT_S)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_MGMT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_MGMT, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_MGMT_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_CTRL_M 0x00000400
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_CTRL_S 10
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_CTRL_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_CTRL_M) >> \
HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_CTRL_S)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_CTRL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_CTRL, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_CTRL_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_DATA_M 0x00000800
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_DATA_S 11
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_DATA_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_DATA_M) >> \
HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_DATA_S)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_DATA_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_DATA, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FILTER_IN_TX_MPDU_END_DATA_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_MGMT_M 0x00001000
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_MGMT_S 12
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_MGMT_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_MGMT_M) >> \
HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_MGMT_S)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_MGMT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_MGMT, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_MGMT_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_CTRL_M 0x00002000
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_CTRL_S 13
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_CTRL_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_CTRL_M) >> \
HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_CTRL_S)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_CTRL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_CTRL, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_CTRL_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_DATA_M 0x00004000
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_DATA_S 14
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_DATA_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_DATA_M) >> \
HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_DATA_S)
#define HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_DATA_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_DATA, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FILTER_IN_TX_MSDU_END_DATA_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_WORD_MASK_COMPACTION_ENABLE_M 0x00008000
#define HTT_TX_MONITOR_CFG_WORD_MASK_COMPACTION_ENABLE_S 15
#define HTT_TX_MONITOR_CFG_WORD_MASK_COMPACTION_ENABLE_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_WORD_MASK_COMPACTION_ENABLE_M) >> \
HTT_TX_MONITOR_CFG_WORD_MASK_COMPACTION_ENABLE_S)
#define HTT_TX_MONITOR_CFG_WORD_MASK_COMPACTION_ENABLE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_WORD_MASK_COMPACTION_ENABLE, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_WORD_MASK_COMPACTION_ENABLE_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_M 0xffffffff
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_S 0
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_M) >> \
HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_S)
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_TLV_FILTER_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_TX_FES_SETUP_WORD_MASK_M 0x000000ff
#define HTT_TX_MONITOR_CFG_TX_FES_SETUP_WORD_MASK_S 0
#define HTT_TX_MONITOR_CFG_TX_FES_SETUP_WORD_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_TX_FES_SETUP_WORD_MASK_M) >> \
HTT_TX_MONITOR_CFG_TX_FES_SETUP_WORD_MASK_S)
#define HTT_TX_MONITOR_CFG_TX_FES_SETUP_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_TX_FES_SETUP_WORD_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_TX_FES_SETUP_WORD_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_WORD_MASK_M 0x0000ff00
#define HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_WORD_MASK_S 8
#define HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_WORD_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_WORD_MASK_M) >> \
HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_WORD_MASK_S)
#define HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_WORD_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_WORD_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_WORD_MASK_M 0x00ff0000
#define HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_WORD_MASK_S 16
#define HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_WORD_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_WORD_MASK_M) >> \
HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_WORD_MASK_S)
#define HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_WORD_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_WORD_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_TX_MSDU_START_WORD_MASK_M 0xff000000
#define HTT_TX_MONITOR_CFG_TX_MSDU_START_WORD_MASK_S 24
#define HTT_TX_MONITOR_CFG_TX_MSDU_START_WORD_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_TX_MSDU_START_WORD_MASK_M) >> \
HTT_TX_MONITOR_CFG_TX_MSDU_START_WORD_MASK_S)
#define HTT_TX_MONITOR_CFG_TX_MSDU_START_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_TX_MSDU_START_WORD_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_TX_MSDU_START_WORD_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_PCU_PPDU_SETUP_WORD_MASK_M 0xffffffff
#define HTT_TX_MONITOR_CFG_PCU_PPDU_SETUP_WORD_MASK_S 0
#define HTT_TX_MONITOR_CFG_PCU_PPDU_SETUP_WORD_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_PCU_PPDU_SETUP_WORD_MASK_M) >> \
HTT_TX_MONITOR_CFG_PCU_PPDU_SETUP_WORD_MASK_S)
#define HTT_TX_MONITOR_CFG_PCU_PPDU_SETUP_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_PCU_PPDU_SETUP_WORD_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_PCU_PPDU_SETUP_WORD_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_TX_MPDU_START_WORD_MASK_M 0x000000ff
#define HTT_TX_MONITOR_CFG_TX_MPDU_START_WORD_MASK_S 0
#define HTT_TX_MONITOR_CFG_TX_MPDU_START_WORD_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_TX_MPDU_START_WORD_MASK_M) >> \
HTT_TX_MONITOR_CFG_TX_MPDU_START_WORD_MASK_S)
#define HTT_TX_MONITOR_CFG_TX_MPDU_START_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_TX_MPDU_START_WORD_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_TX_MPDU_START_WORD_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_RXPCU_USER_SETUP_WORD_MASK_M 0x0000ff00
#define HTT_TX_MONITOR_CFG_RXPCU_USER_SETUP_WORD_MASK_S 8
#define HTT_TX_MONITOR_CFG_RXPCU_USER_SETUP_WORD_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_RXPCU_USER_SETUP_WORD_MASK_M) >> \
HTT_TX_MONITOR_CFG_RXPCU_USER_SETUP_WORD_MASK_S)
#define HTT_TX_MONITOR_CFG_RXPCU_USER_SETUP_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_RXPCU_USER_SETUP_WORD_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_RXPCU_USER_SETUP_WORD_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_MASK_M 0x00070000
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_MASK_S 16
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_MASK_M) >> \
HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_MASK_S)
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_DMA_MPDU_MGMT_M 0x00080000
#define HTT_TX_MONITOR_CFG_DMA_MPDU_MGMT_S 19
#define HTT_TX_MONITOR_CFG_DMA_MPDU_MGMT_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_DMA_MPDU_MGMT_M) >> \
HTT_TX_MONITOR_CFG_DMA_MPDU_MGMT_S)
#define HTT_TX_MONITOR_CFG_DMA_MPDU_MGMT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_DMA_MPDU_MGMT, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_DMA_MPDU_MGMT_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_DMA_MPDU_CTRL_M 0x00100000
#define HTT_TX_MONITOR_CFG_DMA_MPDU_CTRL_S 20
#define HTT_TX_MONITOR_CFG_DMA_MPDU_CTRL_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_DMA_MPDU_CTRL_M) >> \
HTT_TX_MONITOR_CFG_DMA_MPDU_CTRL_S)
#define HTT_TX_MONITOR_CFG_DMA_MPDU_CTRL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_DMA_MPDU_CTRL, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_DMA_MPDU_CTRL_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_DMA_MPDU_DATA_M 0x00200000
#define HTT_TX_MONITOR_CFG_DMA_MPDU_DATA_S 21
#define HTT_TX_MONITOR_CFG_DMA_MPDU_DATA_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_DMA_MPDU_DATA_M) >> \
HTT_TX_MONITOR_CFG_DMA_MPDU_DATA_S)
#define HTT_TX_MONITOR_CFG_DMA_MPDU_DATA_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_DMA_MPDU_DATA, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_DMA_MPDU_DATA_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_V2_WORD_MASK_M 0x00000fff
#define HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_V2_WORD_MASK_S 0
#define HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_V2_WORD_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_V2_WORD_MASK_M) >> \
HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_V2_WORD_MASK_S)
#define HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_V2_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_V2_WORD_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_TX_QUEUE_EXT_V2_WORD_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_V2_WORD_MASK_M 0x00fff000
#define HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_V2_WORD_MASK_S 12
#define HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_V2_WORD_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_V2_WORD_MASK_M) >> \
HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_V2_WORD_MASK_S)
#define HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_V2_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_V2_WORD_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_TX_PEER_ENTRY_V2_WORD_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FES_STATUS_END_WORD_MASK_M 0x0000ffff
#define HTT_TX_MONITOR_CFG_FES_STATUS_END_WORD_MASK_S 0
#define HTT_TX_MONITOR_CFG_FES_STATUS_END_WORD_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FES_STATUS_END_WORD_MASK_M) >> \
HTT_TX_MONITOR_CFG_FES_STATUS_END_WORD_MASK_S)
#define HTT_TX_MONITOR_CFG_FES_STATUS_END_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FES_STATUS_END_WORD_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FES_STATUS_END_WORD_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_RESPONSE_END_STATUS_WORD_MASK_M 0xffff0000
#define HTT_TX_MONITOR_CFG_RESPONSE_END_STATUS_WORD_MASK_S 16
#define HTT_TX_MONITOR_CFG_RESPONSE_END_STATUS_WORD_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_RESPONSE_END_STATUS_WORD_MASK_M) >> \
HTT_TX_MONITOR_CFG_RESPONSE_END_STATUS_WORD_MASK_S)
#define HTT_TX_MONITOR_CFG_RESPONSE_END_STATUS_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_RESPONSE_END_STATUS_WORD_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_RESPONSE_END_STATUS_WORD_MASK_S)); \
} while (0)
#define HTT_TX_MONITOR_CFG_FES_STATUS_PROT_WORD_MASK_M 0x000007ff
#define HTT_TX_MONITOR_CFG_FES_STATUS_PROT_WORD_MASK_S 0
#define HTT_TX_MONITOR_CFG_FES_STATUS_PROT_WORD_MASK_GET(_var) \
(((_var) & HTT_TX_MONITOR_CFG_FES_STATUS_PROT_WORD_MASK_M) >> \
HTT_TX_MONITOR_CFG_FES_STATUS_PROT_WORD_MASK_S)
#define HTT_TX_MONITOR_CFG_FES_STATUS_PROT_WORD_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MONITOR_CFG_FES_STATUS_PROT_WORD_MASK, _val); \
((_var) |= ((_val) << HTT_TX_MONITOR_CFG_FES_STATUS_PROT_WORD_MASK_S)); \
} while (0)
/*
* pkt_type_enable_flags
*/
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_MGMT_M 0x00000001
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_MGMT_S 0
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_CTRL_M 0x00000002
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_CTRL_S 1
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_DATA_M 0x00000004
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_FLAGS_DATA_S 2
/*
* PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING
*/
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_MGMT_M 0x00010000
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_MGMT_S 16
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_CTRL_M 0x00020000
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_CTRL_S 17
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_DATA_M 0x00040000
#define HTT_TX_MONITOR_CFG_PKT_TYPE_ENABLE_MSDU_OR_MPDU_LOGGING_DATA_S 18
#define HTT_TX_MONITOR_CFG_PKT_TYPE_SET(word, httsym, value) \
do { \
HTT_CHECK_SET_VAL(httsym, value); \
(word) |= (value) << httsym##_S; \
} while (0)
#define HTT_TX_MONITOR_CFG_PKT_TYPE_GET(word, httsym) \
(((word) & httsym##_M) >> httsym##_S)
/* mode -> ENABLE_FLAGS, ENABLE_MSDU_OR_MPDU_LOGGING
* type -> MGMT, CTRL, DATA*/
#define htt_tx_ring_pkt_type_set( \
word, mode, type, val) \
HTT_TX_MONITOR_CFG_PKT_TYPE_SET( \
word, HTT_TX_MONITOR_CFG_PKT_TYPE_##mode##_##type, val)
#define htt_tx_ring_pkt_type_get( \
word, mode, type) \
HTT_TX_MONITOR_CFG_PKT_TYPE_GET( \
word, HTT_TX_MONITOR_CFG_PKT_TYPE_##mode##_##type)
/* Definition to filter in TLVs */
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_FES_SETUP_M 0x00000001
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_FES_SETUP_S 0
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_PEER_ENTRY_M 0x00000002
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_PEER_ENTRY_S 1
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_QUEUE_EXTENSION_M 0x00000004
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_QUEUE_EXTENSION_S 2
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_LAST_MPDU_END_M 0x00000008
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_LAST_MPDU_END_S 3
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_LAST_MPDU_FETCHED_M 0x00000010
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_LAST_MPDU_FETCHED_S 4
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_DATA_SYNC_M 0x00000020
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_DATA_SYNC_S 5
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_PCU_PPDU_SETUP_INIT_M 0x00000040
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_PCU_PPDU_SETUP_INIT_S 6
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_FW2SW_MON_M 0x00000080
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_FW2SW_MON_S 7
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_LOOPBACK_SETUP_M 0x00000100
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_LOOPBACK_SETUP_S 8
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_SCH_CRITICAL_TLV_REFERENCE_M 0x00000200
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_SCH_CRITICAL_TLV_REFERENCE_S 9
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_NDP_PREAMBLE_DONE_M 0x00000400
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_NDP_PREAMBLE_DONE_S 10
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_RAW_OR_NATIVE_FRAME_SETUP_M 0x00000800
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_RAW_OR_NATIVE_FRAME_SETUP_S 11
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TXPCU_USER_SETUP_M 0x00001000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TXPCU_USER_SETUP_S 12
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_RXPCU_SETUP_M 0x00002000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_RXPCU_SETUP_S 13
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_RXPCU_SETUP_COMPLETE_M 0x00004000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_RXPCU_SETUP_COMPLETE_S 14
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_COEX_TX_REQ_M 0x00008000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_COEX_TX_REQ_S 15
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_RXPCU_USER_SETUP_M 0x00010000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_RXPCU_USER_SETUP_S 16
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_RXPCU_USER_SETUP_EXT_M 0x00020000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_RXPCU_USER_SETUP_EXT_S 17
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_WUR_DATA_M 0x00040000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_WUR_DATA_S 18
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TQM_MPDU_GLOBAL_START_M 0x00080000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TQM_MPDU_GLOBAL_START_S 19
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_FES_SETUP_COMPLETE_M 0x00100000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_TX_FES_SETUP_COMPLETE_S 20
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_SCHEDULER_END_M 0x00200000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_SCHEDULER_END_S 21
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_SCH_WAIT_INSTR_TX_PATH_M 0x00400000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_SCH_WAIT_INSTR_TX_PATH_S 22
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MACTX_MU_UPLINK_COMMON_M 0x00800000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MACTX_MU_UPLINK_COMMON_S 23
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MACTX_MU_UPLINK_COMMON_PUNC_M 0x01000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MACTX_MU_UPLINK_COMMON_PUNC_S 24
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MACTX_MU_UPLINK_COMMON_PER_BW_M 0x02000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MACTX_MU_UPLINK_COMMON_PER_BW_S 25
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MACTX_MU_UPLINK_USER_SETUP_M 0x04000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MACTX_MU_UPLINK_USER_SETUP_S 26
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MACTX_MU_UPLINK_USER_SETUP_PUNC_M 0x08000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MACTX_MU_UPLINK_USER_SETUP_PUNC_S 27
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MACTX_MU_UPLINK_USER_SETUP_PER_BW_M 0x10000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MACTX_MU_UPLINK_USER_SETUP_PER_BW_S 28
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MPDU_QUEUE_OVERVIEW_M 0x20000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_MPDU_QUEUE_OVERVIEW_S 29
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_BF_PARAMS_COMMON_M 0x40000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_BF_PARAMS_COMMON_S 30
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_BF_PARAMS_PER_USER_M 0x80000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_BF_PARAMS_PER_USER_S 31
#define HTT_TX_MONITOR_TLV_FILTER_MASK_IN0_SET(word, httsym, enable) \
do { \
HTT_CHECK_SET_VAL(httsym, enable); \
(word) |= (enable) << httsym##_S; \
} while (0)
#define HTT_TX_MONITOR_TLV_FILTER_MASK_IN0_GET(word, httsym) \
(((word) & httsym##_M) >> httsym##_S)
#define htt_tx_monitor_tlv_filter_in0_enable_set(word, tlv, enable) \
HTT_TX_MONITOR_TLV_FILTER_MASK_IN0_SET( \
word, HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_##tlv, enable)
#define htt_tx_monitor_tlv_filter_in0_enable_get(word, tlv) \
HTT_TX_MONITOR_TLV_FILTER_MASK_IN0_GET( \
word, HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN0_##tlv)
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RX_RESPONSE_REQUIRED_INFO_M 0x00000001
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RX_RESPONSE_REQUIRED_INFO_S 0
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RESPONSE_START_STATUS_M 0x00000002
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RESPONSE_START_STATUS_S 1
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RESPONSE_END_STATUS_M 0x00000004
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RESPONSE_END_STATUS_S 2
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_START_M 0x00000008
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_START_S 3
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_END_M 0x00000010
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_END_S 4
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_START_PPDU_M 0x00000020
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_START_PPDU_S 5
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_USER_PPDU_M 0x00000040
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_USER_PPDU_S 6
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_ACK_OR_BA_M 0x00000080
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_ACK_OR_BA_S 7
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_1K_BA_M 0x00000100
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_1K_BA_S 8
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_START_PROT_M 0x00000200
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_START_PROT_S 9
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_PROT_M 0x00000400
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_PROT_S 10
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_USER_RESPONSE_M 0x00000800
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TX_FES_STATUS_USER_RESPONSE_S 11
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RX_FRAME_BITMAP_ACK_M 0x00001000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RX_FRAME_BITMAP_ACK_S 12
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RX_FRAME_1K_BITMAP_ACK_M 0x00002000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RX_FRAME_1K_BITMAP_ACK_S 13
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_COEX_TX_STATUS_M 0x00004000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_COEX_TX_STATUS_S 14
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RECEIVED_RESPONSE_INFO_M 0x00008000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RECEIVED_RESPONSE_INFO_S 15
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RECEIVED_RESPONSE_INFO_PART2_M 0x00010000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RECEIVED_RESPONSE_INFO_PART2_S 16
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_OFDMA_TRIGGER_DETAILS_M 0x00020000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_OFDMA_TRIGGER_DETAILS_S 17
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RECEIVED_TRIGGER_INFO_M 0x00040000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_RECEIVED_TRIGGER_INFO_S 18
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_PDG_TX_REQUEST_M 0x00080000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_PDG_TX_REQUEST_S 19
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_PDG_RESPONSE_M 0x00100000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_PDG_RESPONSE_S 20
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_PDG_TRIG_RESPONSE_M 0x00200000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_PDG_TRIG_RESPONSE_S 21
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TRIGGER_RESPONSE_TX_DONE_M 0x00400000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_TRIGGER_RESPONSE_TX_DONE_S 22
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_PROT_TX_END_M 0x00800000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_PROT_TX_END_S 23
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_PPDU_TX_END_M 0x01000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_PPDU_TX_END_S 24
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_R2R_STATUS_END_M 0x02000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_R2R_STATUS_END_S 25
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_FLUSH_REQ_M 0x04000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_FLUSH_REQ_S 26
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_MACTX_PHY_DESC_M 0x08000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_MACTX_PHY_DESC_S 27
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_MACTX_USER_DESC_COMMON_M 0x10000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_MACTX_USER_DESC_COMMON_S 28
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_MACTX_USER_DESC_PER_USER_M 0x20000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_MACTX_USER_DESC_PER_USER_S 29
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_L_SIG_A_M 0x40000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_L_SIG_A_S 30
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_L_SIG_B_M 0x80000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_L_SIG_B_S 31
#define HTT_TX_MONITOR_TLV_FILTER_MASK_IN1_SET(word, httsym, enable) \
do { \
HTT_CHECK_SET_VAL(httsym, enable); \
(word) |= (enable) << httsym##_S; \
} while (0)
#define HTT_TX_MONITOR_TLV_FILTER_MASK_IN1_GET(word, httsym) \
(((word) & httsym##_M) >> httsym##_S)
#define htt_tx_monitor_tlv_filter_in1_enable_set(word, tlv, enable) \
HTT_TX_MONITOR_TLV_FILTER_MASK_IN1_SET( \
word, HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_##tlv, enable)
#define htt_tx_monitor_tlv_filter_in1_enable_get(word, tlv) \
HTT_TX_MONITOR_TLV_FILTER_MASK_IN1_GET( \
word, HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN1_##tlv)
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HT_SIG_M 0x00000001
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HT_SIG_S 0
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_A_M 0x00000002
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_A_S 1
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_SU20_M 0x00000004
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_SU20_S 2
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_SU40_M 0x00000008
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_SU40_S 3
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_SU80_M 0x00000010
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_SU80_S 4
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_SU160_M 0x00000020
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_SU160_S 5
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_MU20_M 0x00000040
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_MU20_S 6
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_MU40_M 0x00000080
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_MU40_S 7
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_MU80_M 0x00000100
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_MU80_S 8
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_MU160_M 0x00000200
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_VHT_SIG_B_MU160_S 9
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TX_SERVICE_M 0x00000400
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TX_SERVICE_S 10
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HE_SIG_A_SU_M 0x00000800
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HE_SIG_A_SU_S 11
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HE_SIG_A_MU_DL_M 0x00001000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HE_SIG_A_MU_DL_S 12
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HE_SIG_A_MU_UL_M 0x00002000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HE_SIG_A_MU_UL_S 13
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HE_SIG_B1_MU_M 0x00004000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HE_SIG_B1_MU_S 14
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HE_SIG_B2_MU_M 0x00008000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HE_SIG_B2_MU_S 15
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HE_SIG_B2_OFDMA_M 0x00010000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_HE_SIG_B2_OFDMA_S 16
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_U_SIG_EHT_SU_MU_M 0x00020000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_U_SIG_EHT_SU_MU_S 17
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_U_SIG_EHT_SU_M 0x00040000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_U_SIG_EHT_SU_S 18
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_U_SIG_EHT_TB_M 0x00080000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_U_SIG_EHT_TB_S 19
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_EHT_SIG_USR_SU_M 0x00100000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_EHT_SIG_USR_SU_S 20
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_EHT_SIG_USR_MU_MIMO_M 0x00200000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_EHT_SIG_USR_MU_MIMO_S 21
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_EHT_SIG_USR_OFDMA_M 0x00400000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_EHT_SIG_USR_OFDMA_S 22
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_PHYTX_PPDU_HEADER_INFO_REQUEST_M 0x00800000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_PHYTX_PPDU_HEADER_INFO_REQUEST_S 23
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TQM_UPDATE_TX_MPDU_COUNT_M 0x01000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TQM_UPDATE_TX_MPDU_COUNT_S 24
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TQM_ACKED_MPDU_M 0x02000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TQM_ACKED_MPDU_S 25
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TQM_ACKED_1K_MPDU_M 0x04000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TQM_ACKED_1K_MPDU_S 26
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TXPCU_BUFFER_STATUS_M 0x08000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TXPCU_BUFFER_STATUS_S 27
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TXPCU_USER_BUFFER_STATUS_M 0x10000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TXPCU_USER_BUFFER_STATUS_S 28
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TXDMA_STOP_REQUEST_M 0x20000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TXDMA_STOP_REQUEST_S 29
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_EXPECTED_RESPONSE_M 0x40000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_EXPECTED_RESPONSE_S 30
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TX_MPDU_COUNT_TRANSFER_END_M 0x80000000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_TX_MPDU_COUNT_TRANSFER_END_S 31
#define HTT_TX_MONITOR_TLV_FILTER_MASK_IN2_SET(word, httsym, enable) \
do { \
HTT_CHECK_SET_VAL(httsym, enable); \
(word) |= (enable) << httsym##_S; \
} while (0)
#define HTT_TX_MONITOR_TLV_FILTER_MASK_IN2_GET(word, httsym) \
(((word) & httsym##_M) >> httsym##_S)
#define htt_tx_monitor_tlv_filter_in2_enable_set(word, tlv, enable) \
HTT_TX_MONITOR_TLV_FILTER_MASK_IN2_SET( \
word, HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_##tlv, enable)
#define htt_tx_monitor_tlv_filter_in2_enable_get(word, tlv) \
HTT_TX_MONITOR_TLV_FILTER_MASK_IN2_GET( \
word, HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN2_##tlv)
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_TRIG_INFO_M 0x00000001
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_TRIG_INFO_S 0
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RXPCU_TX_SETUP_CLEAR_M 0x00000002
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RXPCU_TX_SETUP_CLEAR_S 1
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_FRAME_BITMAP_REQ_M 0x00000004
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_FRAME_BITMAP_REQ_S 2
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_PHY_SLEEP_M 0x00000008
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_PHY_SLEEP_S 3
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_TXPCU_PREAMBLE_DONE_M 0x00000010
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_TXPCU_PREAMBLE_DONE_S 4
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_TXPCU_PHYTX_DEBUG32_M 0x00000020
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_TXPCU_PHYTX_DEBUG32_S 5
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_TXPCU_PHYTX_OTHER_TRANSMIT_INFO32_M 0x00000040
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_TXPCU_PHYTX_OTHER_TRANSMIT_INFO32_S 6
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_PPDU_NO_ACK_REPORT_M 0x00000080
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_PPDU_NO_ACK_REPORT_S 7
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_PPDU_ACK_REPORT_M 0x00000100
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_PPDU_ACK_REPORT_S 8
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_COEX_RX_STATUS_M 0x00000200
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_COEX_RX_STATUS_S 9
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_START_PARAM_M 0x00000400
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_START_PARAM_S 10
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_TX_CBF_INFO_M 0x00000800
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_TX_CBF_INFO_S 11
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RXPCU_EARLY_RX_INDICATION_M 0x00001000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RXPCU_EARLY_RX_INDICATION_S 12
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RECEIVED_RESPONSE_USER_7_0_M 0x00002000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RECEIVED_RESPONSE_USER_7_0_S 13
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RECEIVED_RESPONSE_USER_15_8_M 0x00004000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RECEIVED_RESPONSE_USER_15_8_S 14
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RECEIVED_RESPONSE_USER_23_16_M 0x00008000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RECEIVED_RESPONSE_USER_23_16_S 15
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RECEIVED_RESPONSE_USER_31_24_M 0x00010000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RECEIVED_RESPONSE_USER_31_24_S 16
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RECEIVED_RESPONSE_USER_36_32_M 0x00020000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RECEIVED_RESPONSE_USER_36_32_S 17
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_PM_INFO_M 0x00040000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_PM_INFO_S 18
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_PREAMBLE_M 0x00080000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_RX_PREAMBLE_S 19
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_OTHERS_M 0x00100000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_OTHERS_S 20
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_MACTX_PRE_PHY_DESC_M 0x00200000
#define HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_MACTX_PRE_PHY_DESC_S 21
#define HTT_TX_MONITOR_TLV_FILTER_MASK_IN3_SET(word, httsym, enable) \
do { \
HTT_CHECK_SET_VAL(httsym, enable); \
(word) |= (enable) << httsym##_S; \
} while (0)
#define HTT_TX_MONITOR_TLV_FILTER_MASK_IN3_GET(word, httsym) \
(((word) & httsym##_M) >> httsym##_S)
#define htt_tx_monitor_tlv_filter_in3_enable_set(word, tlv, enable) \
HTT_TX_MONITOR_TLV_FILTER_MASK_IN3_SET( \
word, HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_##tlv, enable)
#define htt_tx_monitor_tlv_filter_in3_enable_get(word, tlv) \
HTT_TX_MONITOR_TLV_FILTER_MASK_IN3_GET( \
word, HTT_TX_MONITOR_CFG_TLV_FILTER_MASK_IN3_##tlv)
/**
* @brief host --> target Receive Flow Steering configuration message definition
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_RFS_CONFIG
*
* host --> target Receive Flow Steering configuration message definition.
* Host must send this message before sending HTT_H2T_MSG_TYPE_RX_RING_CFG.
* The reason for this is we want RFS to be configured and ready before MAC
* remote ring is enabled via HTT_H2T_MSG_TYPE_RX_RING_CFG.
*
* |31 24|23 16|15 9|8|7 0|
* |----------------+----------------+----------------+----------------|
* | reserved |E| msg type |
* |-------------------------------------------------------------------|
* Where E = RFS enable flag
*
* The RFS_CONFIG message consists of a single 4-byte word.
*
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a RFS config msg
* Value: 0xf (HTT_H2T_MSG_TYPE_RFS_CONFIG)
* - RFS_CONFIG
* Bit 8
* Purpose: Tells target whether to enable (1) or disable (0)
* flow steering feature when sending rx indication messages to host
*/
#define HTT_H2T_RFS_CONFIG_M 0x100
#define HTT_H2T_RFS_CONFIG_S 8
#define HTT_RX_RFS_CONFIG_GET(_var) \
(((_var) & HTT_H2T_RFS_CONFIG_M) >> \
HTT_H2T_RFS_CONFIG_S)
#define HTT_RX_RFS_CONFIG_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_RFS_CONFIG, _val); \
((_var) |= ((_val) << HTT_H2T_RFS_CONFIG_S)); \
} while (0)
#define HTT_RFS_CFG_REQ_BYTES 4
/**
* @brief host -> target FW extended statistics request
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_EXT_STATS_REQ
*
* @details
* The following field definitions describe the format of the HTT host
* to target FW extended stats retrieve message.
* The message specifies the type of stats the host wants to retrieve.
*
* |31 24|23 16|15 8|7 0|
* |-----------------------------------------------------------|
* | reserved | stats type | pdev_mask | msg type |
* |-----------------------------------------------------------|
* | config param [0] |
* |-----------------------------------------------------------|
* | config param [1] |
* |-----------------------------------------------------------|
* | config param [2] |
* |-----------------------------------------------------------|
* | config param [3] |
* |-----------------------------------------------------------|
* | reserved |
* |-----------------------------------------------------------|
* | cookie LSBs |
* |-----------------------------------------------------------|
* | cookie MSBs |
* |-----------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this is a extended stats upload request message
* Value: 0x10 (HTT_H2T_MSG_TYPE_EXT_STATS_REQ)
* - PDEV_MASK
* Bits 8:15
* Purpose: identifies the mask of PDEVs to retrieve stats from
* Value: This is a overloaded field, refer to usage and interpretation of
* PDEV in interface document.
* Bit 8 : Reserved for SOC stats
* Bit 9 - 15 : Indicates PDEV_MASK in DBDC
* Indicates MACID_MASK in DBS
* - STATS_TYPE
* Bits 23:16
* Purpose: identifies which FW statistics to upload
* Value: Defined by htt_dbg_ext_stats_type (see htt_stats.h)
* - Reserved
* Bits 31:24
* - CONFIG_PARAM [0]
* Bits 31:0
* Purpose: give an opaque configuration value to the specified stats type
* Value: stats-type specific configuration value
* Refer to htt_stats.h for interpretation for each stats sub_type
* - CONFIG_PARAM [1]
* Bits 31:0
* Purpose: give an opaque configuration value to the specified stats type
* Value: stats-type specific configuration value
* Refer to htt_stats.h for interpretation for each stats sub_type
* - CONFIG_PARAM [2]
* Bits 31:0
* Purpose: give an opaque configuration value to the specified stats type
* Value: stats-type specific configuration value
* Refer to htt_stats.h for interpretation for each stats sub_type
* - CONFIG_PARAM [3]
* Bits 31:0
* Purpose: give an opaque configuration value to the specified stats type
* Value: stats-type specific configuration value
* Refer to htt_stats.h for interpretation for each stats sub_type
* - Reserved [31:0] for future use.
* - COOKIE_LSBS
* Bits 31:0
* Purpose: Provide a mechanism to match a target->host stats confirmation
* message with its preceding host->target stats request message.
* Value: LSBs of the opaque cookie specified by the host-side requestor
* - COOKIE_MSBS
* Bits 31:0
* Purpose: Provide a mechanism to match a target->host stats confirmation
* message with its preceding host->target stats request message.
* Value: MSBs of the opaque cookie specified by the host-side requestor
*/
#define HTT_H2T_EXT_STATS_REQ_MSG_SZ 32 /* bytes */
#define HTT_H2T_EXT_STATS_REQ_PDEV_MASK_M 0x0000ff00
#define HTT_H2T_EXT_STATS_REQ_PDEV_MASK_S 8
#define HTT_H2T_EXT_STATS_REQ_STATS_TYPE_M 0x00ff0000
#define HTT_H2T_EXT_STATS_REQ_STATS_TYPE_S 16
#define HTT_H2T_EXT_STATS_REQ_CONFIG_PARAM_M 0xffffffff
#define HTT_H2T_EXT_STATS_REQ_CONFIG_PARAM_S 0
#define HTT_H2T_EXT_STATS_REQ_PDEV_MASK_GET(_var) \
(((_var) & HTT_H2T_EXT_STATS_REQ_PDEV_MASK_M) >> \
HTT_H2T_EXT_STATS_REQ_PDEV_MASK_S)
#define HTT_H2T_EXT_STATS_REQ_PDEV_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_EXT_STATS_REQ_PDEV_MASK, _val); \
((_var) |= ((_val) << HTT_H2T_EXT_STATS_REQ_PDEV_MASK_S)); \
} while (0)
#define HTT_H2T_EXT_STATS_REQ_STATS_TYPE_GET(_var) \
(((_var) & HTT_H2T_EXT_STATS_REQ_STATS_TYPE_M) >> \
HTT_H2T_EXT_STATS_REQ_STATS_TYPE_S)
#define HTT_H2T_EXT_STATS_REQ_STATS_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_EXT_STATS_REQ_STATS_TYPE, _val); \
((_var) |= ((_val) << HTT_H2T_EXT_STATS_REQ_STATS_TYPE_S)); \
} while (0)
#define HTT_H2T_EXT_STATS_REQ_CONFIG_PARAM_GET(_var) \
(((_var) & HTT_H2T_EXT_STATS_REQ_CONFIG_PARAM_M) >> \
HTT_H2T_EXT_STATS_REQ_CONFIG_PARAM_S)
#define HTT_H2T_EXT_STATS_REQ_CONFIG_PARAM_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_EXT_STATS_REQ_CONFIG_PARAM, _val); \
((_var) |= ((_val) << HTT_H2T_EXT_STATS_REQ_CONFIG_PARAM_S)); \
} while (0)
/**
* @brief host -> target FW streaming statistics request
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_STREAMING_STATS_REQ
*
* @details
* The following field definitions describe the format of the HTT host
* to target message that requests the target to start or stop producing
* ongoing stats of the specified type.
*
* |31|30 |23 16|15 8|7 0|
* |-----------------------------------------------------------|
* |EN| reserved | stats type | reserved | msg type |
* |-----------------------------------------------------------|
* | config param [0] |
* |-----------------------------------------------------------|
* | config param [1] |
* |-----------------------------------------------------------|
* | config param [2] |
* |-----------------------------------------------------------|
* | config param [3] |
* |-----------------------------------------------------------|
* Where:
* - EN is an enable/disable flag
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this is a streaming stats upload request message
* Value: 0x20 (HTT_H2T_MSG_TYPE_STREAMING_STATS_REQ)
* - STATS_TYPE
* Bits 23:16
* Purpose: identifies which FW statistics to upload
* Value: Defined by htt_dbg_ext_stats_type (see htt_stats.h)
* Only the htt_dbg_ext_stats_type values identified as streaming
* stats are valid to specify in this STEAMING_STATS_REQ message.
* - ENABLE
* Bit 31
* Purpose: enable/disable the target's ongoing stats of the specified type
* Value:
* 0 - disable ongoing production of the specified stats type
* 1 - enable ongoing production of the specified stats type
* - CONFIG_PARAM [0]
* Bits 31:0
* Purpose: give an opaque configuration value to the specified stats type
* Value: stats-type specific configuration value
* Refer to htt_stats.h for interpretation for each stats sub_type
* - CONFIG_PARAM [1]
* Bits 31:0
* Purpose: give an opaque configuration value to the specified stats type
* Value: stats-type specific configuration value
* Refer to htt_stats.h for interpretation for each stats sub_type
* - CONFIG_PARAM [2]
* Bits 31:0
* Purpose: give an opaque configuration value to the specified stats type
* Value: stats-type specific configuration value
* Refer to htt_stats.h for interpretation for each stats sub_type
* - CONFIG_PARAM [3]
* Bits 31:0
* Purpose: give an opaque configuration value to the specified stats type
* Value: stats-type specific configuration value
* Refer to htt_stats.h for interpretation for each stats sub_type
*/
#define HTT_H2T_STREAMING_STATS_REQ_MSG_SZ 20 /* bytes */
#define HTT_H2T_STREAMING_STATS_REQ_STATS_TYPE_M 0x00ff0000
#define HTT_H2T_STREAMING_STATS_REQ_STATS_TYPE_S 16
#define HTT_H2T_STREAMING_STATS_REQ_ENABLE_M 0x80000000
#define HTT_H2T_STREAMING_STATS_REQ_ENABLE_S 31
#define HTT_H2T_STREAMING_STATS_REQ_STATS_TYPE_GET(_var) \
(((_var) & HTT_H2T_STREAMING_STATS_REQ_STATS_TYPE_M) >> \
HTT_H2T_STREAMING_STATS_REQ_STATS_TYPE_S)
#define HTT_H2T_STREAMING_STATS_REQ_STATS_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_STREAMING_STATS_REQ_STATS_TYPE, _val); \
((_var) |= ((_val) << HTT_H2T_STREAMING_STATS_REQ_STATS_TYPE_S)); \
} while (0)
#define HTT_H2T_STREAMING_STATS_REQ_ENABLE_GET(_var) \
(((_var) & HTT_H2T_STREAMING_STATS_REQ_ENABLE_M) >> \
HTT_H2T_STREAMING_STATS_REQ_ENABLE_S)
#define HTT_H2T_STREAMING_STATS_REQ_ENABLE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_STREAMING_STATS_REQ_ENABLE, _val); \
((_var) |= ((_val) << HTT_H2T_STREAMING_STATS_REQ_ENABLE_S)); \
} while (0)
/**
* @brief host -> target FW PPDU_STATS request message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_PPDU_STATS_CFG
*
* @details
* The following field definitions describe the format of the HTT host
* to target FW for PPDU_STATS_CFG msg.
* The message allows the host to configure the PPDU_STATS_IND messages
* produced by the target.
*
* |31 24|23 16|15 8|7 0|
* |-----------------------------------------------------------|
* | REQ bit mask | pdev_mask | msg type |
* |-----------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this is a req to configure ppdu_stats_ind from target
* Value: 0x11 (HTT_H2T_MSG_TYPE_PPDU_STATS_CFG)
* - PDEV_MASK
* Bits 8:15
* Purpose: identifies which pdevs this PPDU stats configuration applies to
* Value: This is a overloaded field, refer to usage and interpretation of
* PDEV in interface document.
* Bit 8 : Reserved for SOC stats
* Bit 9 - 15 : Indicates PDEV_MASK in DBDC
* Indicates MACID_MASK in DBS
* - REQ_TLV_BIT_MASK
* Bits 16:31
* Purpose: each set bit indicates the corresponding PPDU stats TLV type
* needs to be included in the target's PPDU_STATS_IND messages.
* Value: refer htt_ppdu_stats_tlv_tag_t
*
*/
#define HTT_H2T_PPDU_STATS_CFG_MSG_SZ 4 /* bytes */
#define HTT_H2T_PPDU_STATS_CFG_PDEV_MASK_M 0x0000ff00
#define HTT_H2T_PPDU_STATS_CFG_PDEV_MASK_S 8
#define HTT_H2T_PPDU_STATS_CFG_TLV_BITMASK_M 0xffff0000
#define HTT_H2T_PPDU_STATS_CFG_TLV_BITMASK_S 16
#define HTT_H2T_PPDU_STATS_CFG_PDEV_MASK_GET(_var) \
(((_var) & HTT_H2T_PPDU_STATS_CFG_PDEV_MASK_M) >> \
HTT_H2T_PPDU_STATS_CFG_PDEV_MASK_S)
#define HTT_H2T_PPDU_STATS_CFG_PDEV_MASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_PPDU_STATS_CFG_PDEV_MASK, _val); \
((_var) |= ((_val) << HTT_H2T_PPDU_STATS_CFG_PDEV_MASK_S)); \
} while (0)
#define HTT_H2T_PPDU_STATS_CFG_TLV_BITMASK_GET(_var) \
(((_var) & HTT_H2T_PPDU_STATS_CFG_TLV_BITMASK_M) >> \
HTT_H2T_PPDU_STATS_CFG_TLV_BITMASK_S)
#define HTT_H2T_PPDU_STATS_CFG_TLV_BITMASK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_PPDU_STATS_CFG_TLV_BITMASK, _val); \
((_var) |= ((_val) << HTT_H2T_PPDU_STATS_CFG_TLV_BITMASK_S)); \
} while (0)
/**
* @brief Host-->target HTT RX FSE setup message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_RX_FSE_SETUP_CFG
*
* @details
* Through this message, the host will provide details of the flow tables
* in host DDR along with hash keys.
* This message can be sent per SOC or per PDEV, which is differentiated
* by pdev id values.
* The host will allocate flow search table and sends table size,
* physical DMA address of flow table, and hash keys to firmware to
* program into the RXOLE FSE HW block.
*
* The following field definitions describe the format of the RX FSE setup
* message sent from the host to target
*
* Header fields:
* dword0 - b'7:0 - msg_type: This will be set to
* 0x12 (HTT_H2T_MSG_TYPE_RX_FSE_SETUP_CFG)
* b'15:8 - pdev_id: 0 indicates msg is for all LMAC rings, i.e. soc
* 1, 2, 3 indicates pdev_id 0,1,2 and the msg is for that
* pdev's LMAC ring.
* b'31:16 - reserved : Reserved for future use
* dword1 - b'19:0 - number of records: This field indicates the number of
* entries in the flow table. For example: 8k number of
* records is equivalent to
* 8 * 1024 * sizeof(RX_FLOW_SEARCH_ENTRY_STRUCT)
* b'27:20 - max search: This field specifies the skid length to FSE
* parser HW module whenever match is not found at the
* exact index pointed by hash.
* b'29:28 - ip_da_sa: This indicates which IPV4-IPV6 RFC to be used.
* Refer htt_ip_da_sa_prefix below for more details.
* b'31:30 - reserved: Reserved for future use
* dword2 - b'31:0 - base address lo: Lower 4 bytes base address of flow
* table allocated by host in DDR
* dword3 - b'31:0 - base address hi: Higher 4 bytes of base address of flow
* table allocated by host in DDR
* dword4:13 - b'31:0 - Toeplitz: 315 bits of Toeplitz keys for flow table
* entry hashing
*
*
* |31 30|29 28|27|26|25 20|19 16|15 8|7 0|
* |---------------------------------------------------------------|
* | reserved | pdev_id | MSG_TYPE |
* |---------------------------------------------------------------|
* |resvd|IPDSA| max_search | Number of records |
* |---------------------------------------------------------------|
* | base address lo |
* |---------------------------------------------------------------|
* | base address high |
* |---------------------------------------------------------------|
* | toeplitz key 31_0 |
* |---------------------------------------------------------------|
* | toeplitz key 63_32 |
* |---------------------------------------------------------------|
* | toeplitz key 95_64 |
* |---------------------------------------------------------------|
* | toeplitz key 127_96 |
* |---------------------------------------------------------------|
* | toeplitz key 159_128 |
* |---------------------------------------------------------------|
* | toeplitz key 191_160 |
* |---------------------------------------------------------------|
* | toeplitz key 223_192 |
* |---------------------------------------------------------------|
* | toeplitz key 255_224 |
* |---------------------------------------------------------------|
* | toeplitz key 287_256 |
* |---------------------------------------------------------------|
* | reserved | toeplitz key 314_288(26:0 bits) |
* |---------------------------------------------------------------|
* where:
* IPDSA = ip_da_sa
*/
/**
* @brief: htt_ip_da_sa_prefix
* 0x0 -> Prefix is 0x20010db8_00000000_00000000
* IPv6 addresses beginning with 0x20010db8 are reserved for
* documentation per RFC3849
* 0x1 -> Prefix is 0x00000000_00000000_0000ffff RFC4291 IPv4-mapped IPv6
* 0x2 -> Prefix is 0x0 RFC4291 IPv4-compatible IPv6
* 0x3 -> Prefix is 0x0064ff9b_00000000_00000000 RFC6052 well-known prefix
*/
enum htt_ip_da_sa_prefix {
HTT_RX_IPV6_20010db8,
HTT_RX_IPV4_MAPPED_IPV6,
HTT_RX_IPV4_COMPATIBLE_IPV6,
HTT_RX_IPV6_64FF9B,
};
/**
* @brief Host-->target HTT RX FISA configure and enable
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_RX_FISA_CFG
*
* @details
* The host will send this command down to configure and enable the FISA
* operational params.
* Configure RXOLE_RXOLE_R0_FISA_CTRL and RXOLE_RXOLE_R0_FISA_TIMEOUT_THRESH
* register.
* Should configure both the MACs.
*
* dword0 - b'7:0 - msg_type:
* This will be set to 0x15 (HTT_H2T_MSG_TYPE_RX_FISA_CFG)
* b'15:8 - pdev_id: 0 indicates msg is for all LMAC rings, i.e. soc
* 1, 2, 3 indicates pdev_id 0,1,2 and the msg is for that
* pdev's LMAC ring.
* b'31:16 - reserved : Reserved for future use
*
* dword1 - b'0 - enable: Global FISA Enable, 0-FISA Disable, 1-Enable
* b'1 - IPSEC_SKIP_SEARCH: Flow search will be skipped for IP_SEC
* packets. 1 flow search will be skipped
* b'2 - NON_TCP_SKIP_SEARCH: Flow search will be skipped for Non
* tcp,udp packets
* b'3 - ADD_IPV4_FIXED_HDR_LEN: Add IPV4 Fixed HDR to length
* calculation
* b'4 - ADD_IPV6_FIXED_HDR_LEN: Add IPV6 Fixed HDR to length
* calculation
* b'5 - ADD_TCP_FIXED_HDR_LEN: Add TCP Fixed HDR to length
* calculation
* b'6 - ADD_UDP_HDR_LEN: Add UDP HDR to length calculation
* b'7 - CHKSUM_CUM_IP_LEN_EN: IPV4 hdr Checksum over cumulative IP
* length
* 0 L4 checksum will be provided in the RX_MSDU_END tlv
* 1 IPV4 hdr checksum after adjusting for cumulative IP
* length
* b'8 - DISABLE_TID_CHECK: 1- Disable TID check for MPDU Sequence
* num jump
* b'9 - DISABLE_TA_CHECK: 1- Disable TA check for MPDU Sequence
* num jump
* b'10 - DISABLE_QOS_CHECK: 1- Disable checking if qos/nonqos
* data type switch has happened for MPDU Sequence num jump
* b'11 - DISABLE_RAW_CHECK: 1- Disable checking for raw packet type
* for MPDU Sequence num jump
* b'12 - DISABLE_DECRYPT_ERR_CHECK: 1- Disable fisa cache commands
* for decrypt errors
* b'13 - DISABLE_MSDU_DROP_CHECK: 1- Ignore checking of msdu drop
* while aggregating a msdu
* b'17:14 - LIMIT, Aggregtion limit for number of MSDUs.
* The aggregation is done until (number of MSDUs aggregated
* < LIMIT + 1)
* b'31:18 - Reserved
*
* fisa_control_value - 32bit value FW can write to register
*
* dword2 - b'31:0 - FISA_TIMEOUT_THRESH, Timeout threshold for aggregation
* Threshold value for FISA timeout (units are microseconds).
* When the global timestamp exceeds this threshold, FISA
* aggregation will be restarted.
* A value of 0 means timeout is disabled.
* Compare the threshold register with timestamp field in
* flow entry to generate timeout for the flow.
*
* |31 18 |17 16|15 8|7 0|
* |-------------------------------------------------------------|
* | reserved | pdev_mask | msg type |
* |-------------------------------------------------------------|
* | reserved | FISA_CTRL |
* |-------------------------------------------------------------|
* | FISA_TIMEOUT_THRESH |
* |-------------------------------------------------------------|
*/
PREPACK struct htt_h2t_msg_type_fisa_config_t {
A_UINT32 msg_type:8,
pdev_id:8,
reserved0:16;
/**
* @brief fisa_control - RXOLE_RXOLE_R0_FISA_CTRL FISA control register
* [17:0]
*/
union {
/*
* fisa_control_bits structure is deprecated.
* Please use fisa_control_bits_v2 going forward.
*/
struct {
A_UINT32 fisa_enable: 1,
ipsec_skip_search: 1,
nontcp_skip_search: 1,
add_ipv4_fixed_hdr_len: 1,
add_ipv6_fixed_hdr_len: 1,
add_tcp_fixed_hdr_len: 1,
add_udp_hdr_len: 1,
chksum_cum_ip_len_en: 1,
disable_tid_check: 1,
disable_ta_check: 1,
disable_qos_check: 1,
disable_raw_check: 1,
disable_decrypt_err_check: 1,
disable_msdu_drop_check: 1,
fisa_aggr_limit: 4,
reserved: 14;
} fisa_control_bits;
struct {
A_UINT32 fisa_enable: 1,
fisa_aggr_limit: 6,
reserved: 25;
} fisa_control_bits_v2;
A_UINT32 fisa_control_value;
} u_fisa_control;
/**
* @brief fisa_timeout_threshold - RXOLE_RXOLE_R0_FISA_TIMEOUT_THRESH FISA
* timeout threshold for aggregation. Unit in usec.
* [31:0]
*/
A_UINT32 fisa_timeout_threshold;
} POSTPACK;
/* DWord 0: pdev-ID */
#define HTT_RX_FISA_CONFIG_PDEV_ID_M 0x0000ff00
#define HTT_RX_FISA_CONFIG_PDEV_ID_S 8
#define HTT_RX_FISA_CONFIG_PDEV_ID_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_PDEV_ID_M) >> \
HTT_RX_FISA_CONFIG_PDEV_ID_S)
#define HTT_RX_FISA_CONFIG_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_PDEV_ID_S)); \
} while (0)
/* Dword 1: fisa_control_value fisa config */
#define HTT_RX_FISA_CONFIG_FISA_ENABLE_M 0x00000001
#define HTT_RX_FISA_CONFIG_FISA_ENABLE_S 0
#define HTT_RX_FISA_CONFIG_FISA_ENABLE_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_FISA_ENABLE_M) >> \
HTT_RX_FISA_CONFIG_FISA_ENABLE_S)
#define HTT_RX_FISA_CONFIG_FISA_ENABLE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_FISA_ENABLE, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_FISA_ENABLE_S)); \
} while (0)
/* Dword 1: fisa_control_value ipsec_skip_search */
#define HTT_RX_FISA_CONFIG_IPSEC_SKIP_SEARCH_M 0x00000002
#define HTT_RX_FISA_CONFIG_IPSEC_SKIP_SEARCH_S 1
#define HTT_RX_FISA_CONFIG_IPSEC_SKIP_SEARCH_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_IPSEC_SKIP_SEARCH_M) >> \
HTT_RX_FISA_CONFIG_IPSEC_SKIP_SEARCH_S)
#define HTT_RX_FISA_CONFIG_IPSEC_SKIP_SEARCH_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_IPSEC_SKIP_SEARCH, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_IPSEC_SKIP_SEARCH_S)); \
} while (0)
/* Dword 1: fisa_control_value non_tcp_skip_search */
#define HTT_RX_FISA_CONFIG_NON_TCP_SKIP_SEARCH_M 0x00000004
#define HTT_RX_FISA_CONFIG_NON_TCP_SKIP_SEARCH_S 2
#define HTT_RX_FISA_CONFIG_NON_TCP_SKIP_SEARCH_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_NON_TCP_SKIP_SEARCH_M) >> \
HTT_RX_FISA_CONFIG_NON_TCP_SKIP_SEARCH_S)
#define HTT_RX_FISA_CONFIG_NON_TCP_SKIP_SEARCH_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_NON_TCP_SKIP_SEARCH, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_NON_TCP_SKIP_SEARCH_S)); \
} while (0)
/* Dword 1: fisa_control_value add_ipv4_fixed_hdr */
#define HTT_RX_FISA_CONFIG_ADD_IPV4_FIXED_HDR_LEN_M 0x00000008
#define HTT_RX_FISA_CONFIG_ADD_IPV4_FIXED_HDR_LEN_S 3
#define HTT_RX_FISA_CONFIG_ADD_IPV4_FIXED_HDR_LEN_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_ADD_IPV4_FIXED_HDR_LEN_M) >> \
HTT_RX_FISA_CONFIG_ADD_IPV4_FIXED_HDR_LEN_S)
#define HTT_RX_FISA_CONFIG_ADD_IPV4_FIXED_HDR_LEN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_ADD_IPV4_FIXED_HDR_LEN, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_ADD_IPV4_FIXED_HDR_LEN_S)); \
} while (0)
/* Dword 1: fisa_control_value add_ipv6_fixed_hdr */
#define HTT_RX_FISA_CONFIG_ADD_IPV6_FIXED_HDR_LEN_M 0x00000010
#define HTT_RX_FISA_CONFIG_ADD_IPV6_FIXED_HDR_LEN_S 4
#define HTT_RX_FISA_CONFIG_ADD_IPV6_FIXED_HDR_LEN_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_ADD_IPV6_FIXED_HDR_LEN_M) >> \
HTT_RX_FISA_CONFIG_ADD_IPV6_FIXED_HDR_LEN_S)
#define HTT_RX_FISA_CONFIG_ADD_IPV6_FIXED_HDR_LEN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_ADD_IPV6_FIXED_HDR_LEN, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_ADD_IPV6_FIXED_HDR_LEN_S)); \
} while (0)
/* Dword 1: fisa_control_value tcp_fixed_hdr_len */
#define HTT_RX_FISA_CONFIG_ADD_TCP_FIXED_HDR_LEN_M 0x00000020
#define HTT_RX_FISA_CONFIG_ADD_TCP_FIXED_HDR_LEN_S 5
#define HTT_RX_FISA_CONFIG_ADD_TCP_FIXED_HDR_LEN_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_ADD_TCP_FIXED_HDR_LEN_M) >> \
HTT_RX_FISA_CONFIG_ADD_TCP_FIXED_HDR_LEN_S)
#define HTT_RX_FISA_CONFIG_ADD_TCP_FIXED_HDR_LEN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_ADD_TCP_FIXED_HDR_LEN, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_ADD_TCP_FIXED_HDR_LEN_S)); \
} while (0)
/* Dword 1: fisa_control_value add_udp_hdr_len */
#define HTT_RX_FISA_CONFIG_ADD_UDP_HDR_LEN_M 0x00000040
#define HTT_RX_FISA_CONFIG_ADD_UDP_HDR_LEN_S 6
#define HTT_RX_FISA_CONFIG_ADD_UDP_HDR_LEN_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_ADD_UDP_HDR_LEN_M) >> \
HTT_RX_FISA_CONFIG_ADD_UDP_HDR_LEN_S)
#define HTT_RX_FISA_CONFIG_ADD_UDP_HDR_LEN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_ADD_UDP_HDR_LEN, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_ADD_UDP_HDR_LEN_S)); \
} while (0)
/* Dword 1: fisa_control_value chksum_cum_ip_len_en */
#define HTT_RX_FISA_CONFIG_CHKSUM_CUM_IP_LEN_EN_M 0x00000080
#define HTT_RX_FISA_CONFIG_CHKSUM_CUM_IP_LEN_EN_S 7
#define HTT_RX_FISA_CONFIG_CHKSUM_CUM_IP_LEN_EN_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_CHKSUM_CUM_IP_LEN_EN_M) >> \
HTT_RX_FISA_CONFIG_CHKSUM_CUM_IP_LEN_EN_S)
#define HTT_RX_FISA_CONFIG_CHKSUM_CUM_IP_LEN_EN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_CHKSUM_CUM_IP_LEN_EN, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_CHKSUM_CUM_IP_LEN_EN_S)); \
} while (0)
/* Dword 1: fisa_control_value disable_tid_check */
#define HTT_RX_FISA_CONFIG_DISABLE_TID_CHECK_M 0x00000100
#define HTT_RX_FISA_CONFIG_DISABLE_TID_CHECK_S 8
#define HTT_RX_FISA_CONFIG_DISABLE_TID_CHECK_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_DISABLE_TID_CHECK_M) >> \
HTT_RX_FISA_CONFIG_DISABLE_TID_CHECK_S)
#define HTT_RX_FISA_CONFIG_DISABLE_TID_CHECK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_DISABLE_TID_CHECK, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_DISABLE_TID_CHECK_S)); \
} while (0)
/* Dword 1: fisa_control_value disable_ta_check */
#define HTT_RX_FISA_CONFIG_DISABLE_TA_CHECK_M 0x00000200
#define HTT_RX_FISA_CONFIG_DISABLE_TA_CHECK_S 9
#define HTT_RX_FISA_CONFIG_DISABLE_TA_CHECK_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_DISABLE_TA_CHECK_M) >> \
HTT_RX_FISA_CONFIG_DISABLE_TA_CHECK_S)
#define HTT_RX_FISA_CONFIG_DISABLE_TA_CHECK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_DISABLE_TA_CHECK, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_DISABLE_TA_CHECK_S)); \
} while (0)
/* Dword 1: fisa_control_value disable_qos_check */
#define HTT_RX_FISA_CONFIG_DISABLE_QOS_CHECK_M 0x00000400
#define HTT_RX_FISA_CONFIG_DISABLE_QOS_CHECK_S 10
#define HTT_RX_FISA_CONFIG_DISABLE_QOS_CHECK_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_DISABLE_QOS_CHECK_M) >> \
HTT_RX_FISA_CONFIG_DISABLE_QOS_CHECK_S)
#define HTT_RX_FISA_CONFIG_DISABLE_QOS_CHECK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_DISABLE_QOS_CHECK, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_DISABLE_QOS_CHECK_S)); \
} while (0)
/* Dword 1: fisa_control_value disable_raw_check */
#define HTT_RX_FISA_CONFIG_DISABLE_RAW_CHECK_M 0x00000800
#define HTT_RX_FISA_CONFIG_DISABLE_RAW_CHECK_S 11
#define HTT_RX_FISA_CONFIG_DISABLE_RAW_CHECK_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_DISABLE_RAW_CHECK_M) >> \
HTT_RX_FISA_CONFIG_DISABLE_RAW_CHECK_S)
#define HTT_RX_FISA_CONFIG_DISABLE_RAW_CHECK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_DISABLE_RAW_CHECK, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_DISABLE_RAW_CHECK_S)); \
} while (0)
/* Dword 1: fisa_control_value disable_decrypt_err_check */
#define HTT_RX_FISA_CONFIG_DISABLE_DECRYPT_ERR_CHECK_M 0x00001000
#define HTT_RX_FISA_CONFIG_DISABLE_DECRYPT_ERR_CHECK_S 12
#define HTT_RX_FISA_CONFIG_DISABLE_DECRYPT_ERR_CHECK_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_DISABLE_DECRYPT_ERR_CHECK_M) >> \
HTT_RX_FISA_CONFIG_DISABLE_DECRYPT_ERR_CHECK_S)
#define HTT_RX_FISA_CONFIG_DISABLE_DECRYPT_ERR_CHECK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_DISABLE_DECRYPT_ERR_CHECK, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_DISABLE_DECRYPT_ERR_CHECK_S)); \
} while (0)
/* Dword 1: fisa_control_value disable_msdu_drop_check */
#define HTT_RX_FISA_CONFIG_DISABLE_MSDU_DROP_CHECK_M 0x00002000
#define HTT_RX_FISA_CONFIG_DISABLE_MSDU_DROP_CHECK_S 13
#define HTT_RX_FISA_CONFIG_DISABLE_MSDU_DROP_CHECK_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_DISABLE_MSDU_DROP_CHECK_M) >> \
HTT_RX_FISA_CONFIG_DISABLE_MSDU_DROP_CHECK_S)
#define HTT_RX_FISA_CONFIG_DISABLE_MSDU_DROP_CHECK_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_DISABLE_MSDU_DROP_CHECK, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_DISABLE_MSDU_DROP_CHECK_S)); \
} while (0)
/* Dword 1: fisa_control_value fisa_aggr_limit */
#define HTT_RX_FISA_CONFIG_FISA_AGGR_LIMIT_M 0x0003c000
#define HTT_RX_FISA_CONFIG_FISA_AGGR_LIMIT_S 14
#define HTT_RX_FISA_CONFIG_FISA_AGGR_LIMIT_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_FISA_AGGR_LIMIT_M) >> \
HTT_RX_FISA_CONFIG_FISA_AGGR_LIMIT_S)
#define HTT_RX_FISA_CONFIG_FISA_AGGR_LIMIT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_FISA_AGGR_LIMIT, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_FISA_AGGR_LIMIT_S)); \
} while (0)
/* Dword 1: fisa_control_value fisa config */
#define HTT_RX_FISA_CONFIG_FISA_V2_ENABLE_M 0x00000001
#define HTT_RX_FISA_CONFIG_FISA_V2_ENABLE_S 0
#define HTT_RX_FISA_CONFIG_FISA_V2_ENABLE_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_FISA_V2_ENABLE_M) >> \
HTT_RX_FISA_CONFIG_FISA_V2_ENABLE_S)
#define HTT_RX_FISA_CONFIG_FISA_V2_ENABLE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_FISA_V2_ENABLE, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_FISA_V2_ENABLE_S)); \
} while (0)
/* Dword 1: fisa_control_value fisa_aggr_limit */
#define HTT_RX_FISA_CONFIG_FISA_V2_AGGR_LIMIT_M 0x0000007e
#define HTT_RX_FISA_CONFIG_FISA_V2_AGGR_LIMIT_S 1
#define HTT_RX_FISA_CONFIG_FISA_V2_AGGR_LIMIT_GET(_var) \
(((_var) & HTT_RX_FISA_CONFIG_FISA_V2_AGGR_LIMIT_M) >> \
HTT_RX_FISA_CONFIG_FISA_V2_AGGR_LIMIT_S)
#define HTT_RX_FISA_CONFIG_FISA_V2_AGGR_LIMIT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FISA_CONFIG_FISA_V2_AGGR_LIMIT, _val); \
((_var) |= ((_val) << HTT_RX_FISA_CONFIG_FISA_V2_AGGR_LIMIT_S)); \
} while (0)
PREPACK struct htt_h2t_msg_rx_fse_setup_t {
A_UINT32 msg_type:8, /* HTT_H2T_MSG_TYPE_RX_FSE_SETUP_CFG */
pdev_id:8,
reserved0:16;
A_UINT32 num_records:20,
max_search:8,
ip_da_sa:2, /* htt_ip_da_sa_prefix enumeration */
reserved1:2;
A_UINT32 base_addr_lo;
A_UINT32 base_addr_hi;
A_UINT32 toeplitz31_0;
A_UINT32 toeplitz63_32;
A_UINT32 toeplitz95_64;
A_UINT32 toeplitz127_96;
A_UINT32 toeplitz159_128;
A_UINT32 toeplitz191_160;
A_UINT32 toeplitz223_192;
A_UINT32 toeplitz255_224;
A_UINT32 toeplitz287_256;
A_UINT32 toeplitz314_288:27,
reserved2:5;
} POSTPACK;
#define HTT_RX_FSE_SETUP_SZ (sizeof(struct htt_h2t_msg_rx_fse_setup_t))
#define HTT_RX_FSE_OPERATION_SZ (sizeof(struct htt_h2t_msg_rx_fse_operation_t))
#define HTT_RX_FISA_CONFIG_SZ (sizeof(struct htt_h2t_msg_type_fisa_config_t))
#define HTT_RX_FSE_SETUP_HASH_314_288_M 0x07ffffff
#define HTT_RX_FSE_SETUP_HASH_314_288_S 0
/* DWORD 0: Pdev ID */
#define HTT_RX_FSE_SETUP_PDEV_ID_M 0x0000ff00
#define HTT_RX_FSE_SETUP_PDEV_ID_S 8
#define HTT_RX_FSE_SETUP_PDEV_ID_GET(_var) \
(((_var) & HTT_RX_FSE_SETUP_PDEV_ID_M) >> \
HTT_RX_FSE_SETUP_PDEV_ID_S)
#define HTT_RX_FSE_SETUP_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_SETUP_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_RX_FSE_SETUP_PDEV_ID_S)); \
} while (0)
/* DWORD 1:num of records */
#define HTT_RX_FSE_SETUP_NUM_REC_M 0x000fffff
#define HTT_RX_FSE_SETUP_NUM_REC_S 0
#define HTT_RX_FSE_SETUP_NUM_REC_GET(_var) \
(((_var) & HTT_RX_FSE_SETUP_NUM_REC_M) >> \
HTT_RX_FSE_SETUP_NUM_REC_S)
#define HTT_RX_FSE_SETUP_NUM_REC_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_SETUP_NUM_REC, _val); \
((_var) |= ((_val) << HTT_RX_FSE_SETUP_NUM_REC_S)); \
} while (0)
/* DWORD 1:max_search */
#define HTT_RX_FSE_SETUP_MAX_SEARCH_M 0x0ff00000
#define HTT_RX_FSE_SETUP_MAX_SEARCH_S 20
#define HTT_RX_FSE_SETUP_MAX_SEARCH_GET(_var) \
(((_var) & HTT_RX_FSE_SETUP_MAX_SEARCH_M) >> \
HTT_RX_FSE_SETUP_MAX_SEARCH_S)
#define HTT_RX_FSE_SETUP_MAX_SEARCH_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_SETUP_MAX_SEARCH, _val); \
((_var) |= ((_val) << HTT_RX_FSE_SETUP_MAX_SEARCH_S)); \
} while (0)
/* DWORD 1:ip_da_sa prefix */
#define HTT_RX_FSE_SETUP_IP_DA_SA_PREFIX_M 0x30000000
#define HTT_RX_FSE_SETUP_IP_DA_SA_PREFIX_S 28
#define HTT_RX_FSE_SETUP_IP_DA_SA_PREFIX_GET(_var) \
(((_var) & HTT_RX_FSE_SETUP_IP_DA_SA_PREFIX_M) >> \
HTT_RX_FSE_SETUP_IP_DA_SA_PREFIX_S)
#define HTT_RX_FSE_SETUP_IP_DA_SA_PREFIX_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_SETUP_IP_DA_SA_PREFIX, _val); \
((_var) |= ((_val) << HTT_RX_FSE_SETUP_IP_DA_SA_PREFIX_S)); \
} while (0)
/* DWORD 2: Base Address LO */
#define HTT_RX_FSE_SETUP_BASE_ADDR_LO_M 0xffffffff
#define HTT_RX_FSE_SETUP_BASE_ADDR_LO_S 0
#define HTT_RX_FSE_SETUP_BASE_ADDR_LO_GET(_var) \
(((_var) & HTT_RX_FSE_SETUP_BASE_ADDR_LO_M) >> \
HTT_RX_FSE_SETUP_BASE_ADDR_LO_S)
#define HTT_RX_FSE_SETUP_BASE_ADDR_LO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_SETUP_BASE_ADDR_LO, _val); \
((_var) |= ((_val) << HTT_RX_FSE_SETUP_BASE_ADDR_LO_S)); \
} while (0)
/* DWORD 3: Base Address High */
#define HTT_RX_FSE_SETUP_BASE_ADDR_HI_M 0xffffffff
#define HTT_RX_FSE_SETUP_BASE_ADDR_HI_S 0
#define HTT_RX_FSE_SETUP_BASE_ADDR_HI_GET(_var) \
(((_var) & HTT_RX_FSE_SETUP_BASE_ADDR_HI_M) >> \
HTT_RX_FSE_SETUP_BASE_ADDR_HI_S)
#define HTT_RX_FSE_SETUP_BASE_ADDR_HI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_SETUP_BASE_ADDR_HI, _val); \
((_var) |= ((_val) << HTT_RX_FSE_SETUP_BASE_ADDR_HI_S)); \
} while (0)
/* DWORD 4-12: Hash Value */
#define HTT_RX_FSE_SETUP_HASH_VALUE_M 0xffffffff
#define HTT_RX_FSE_SETUP_HASH_VALUE_S 0
#define HTT_RX_FSE_SETUP_HASH_VALUE_GET(_var) \
(((_var) & HTT_RX_FSE_SETUP_HASH_VALUE_M) >> \
HTT_RX_FSE_SETUP_HASH_VALUE_S)
#define HTT_RX_FSE_SETUP_HASH_VALUE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_SETUP_HASH_VALUE, _val); \
((_var) |= ((_val) << HTT_RX_FSE_SETUP_HASH_VALUE_S)); \
} while (0)
/* DWORD 13: Hash Value 314:288 bits */
#define HTT_RX_FSE_SETUP_HASH_314_288_GET(_var) \
(((_var) & HTT_RX_FSE_SETUP_HASH_314_288_M) >> \
HTT_RX_FSE_SETUP_HASH_314_288_S)
#define HTT_RX_FSE_SETUP_HASH_314_288_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_SETUP_HASH_314_288, _val); \
((_var) |= ((_val) << HTT_RX_FSE_SETUP_HASH_314_288_S)); \
} while (0)
/**
* @brief Host-->target HTT RX FSE operation message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_RX_FSE_OPERATION_CFG
*
* @details
* The host will send this Flow Search Engine (FSE) operation message for
* every flow add/delete operation.
* The FSE operation includes FSE full cache invalidation or individual entry
* invalidation.
* This message can be sent per SOC or per PDEV which is differentiated
* by pdev id values.
*
* |31 16|15 8|7 1|0|
* |-------------------------------------------------------------|
* | reserved | pdev_id | MSG_TYPE |
* |-------------------------------------------------------------|
* | reserved | operation |I|
* |-------------------------------------------------------------|
* | ip_src_addr_31_0 |
* |-------------------------------------------------------------|
* | ip_src_addr_63_32 |
* |-------------------------------------------------------------|
* | ip_src_addr_95_64 |
* |-------------------------------------------------------------|
* | ip_src_addr_127_96 |
* |-------------------------------------------------------------|
* | ip_dst_addr_31_0 |
* |-------------------------------------------------------------|
* | ip_dst_addr_63_32 |
* |-------------------------------------------------------------|
* | ip_dst_addr_95_64 |
* |-------------------------------------------------------------|
* | ip_dst_addr_127_96 |
* |-------------------------------------------------------------|
* | l4_dst_port | l4_src_port |
* | (32-bit SPI incase of IPsec) |
* |-------------------------------------------------------------|
* | reserved | l4_proto |
* |-------------------------------------------------------------|
*
* where I is 1-bit ipsec_valid.
*
* The following field definitions describe the format of the RX FSE operation
* message sent from the host to target for every add/delete flow entry to flow
* table.
*
* Header fields:
* dword0 - b'7:0 - msg_type: This will be set to
* 0x13 (HTT_H2T_MSG_TYPE_RX_FSE_OPERATION_CFG)
* b'15:8 - pdev_id: 0 indicates msg is for all LMAC rings, i.e. soc
* 1, 2, 3 indicates pdev_id 0,1,2 and the msg is for the
* specified pdev's LMAC ring.
* b'31:16 - reserved : Reserved for future use
* dword1 - b'0 - ipsec_valid: This indicates protocol IP or IPsec
* (Internet Protocol Security).
* IPsec describes the framework for providing security at
* IP layer. IPsec is defined for both versions of IP:
* IPV4 and IPV6.
* Please refer to htt_rx_flow_proto enumeration below for
* more info.
* ipsec_valid = 1 for IPSEC packets
* ipsec_valid = 0 for IP Packets
* b'7:1 - operation: This indicates types of FSE operation.
* Refer to htt_rx_fse_operation enumeration:
* 0 - No Cache Invalidation required
* 1 - Cache invalidate only one entry given by IP
* src/dest address at DWORD[2:9]
* 2 - Complete FSE Cache Invalidation
* 3 - FSE Disable
* 4 - FSE Enable
* b'31:8 - reserved: Reserved for future use
* dword2:9-b'31:0 - IP src/dest: IPV4/IPV6 source and destination address
* for per flow addition/deletion
* For IPV4 src/dest addresses, the first A_UINT32 is used
* and the subsequent 3 A_UINT32 will be padding bytes.
* For IPV6 src/dest Addresses, all A_UINT32 are used.
* dword10 -b'31:0 - L4 src port (15:0): 16-bit Source Port numbers range
* from 0 to 65535 but only 0 to 1023 are designated as
* well-known ports. Refer to [RFC1700] for more details.
* This field is valid only if
* (valid_ip_proto(l4_proto) && (ipsec_valid == 0))
* - L4 dest port (31:16): 16-bit Destination Port numbers
* range from 0 to 65535 but only 0 to 1023 are designated
* as well-known ports. Refer to [RFC1700] for more details.
* This field is valid only if
* (valid_ip_proto(l4_proto) && (ipsec_valid == 0))
* - SPI (31:0): Security Parameters Index is an
* identification tag added to the header while using IPsec
* for tunneling the IP traffici.
* Valid only if IPSec_valid bit (in DWORD1) is set to 1.
* dword11 -b'7:0 - l4_proto: This carries L4 protocol numbers, which are
* Assigned Internet Protocol Numbers.
* l4_proto numbers for standard protocol like UDP/TCP
* protocol at l4 layer, e.g. l4_proto = 6 for TCP,
* l4_proto = 17 for UDP etc.
* b'31:8 - reserved: Reserved for future use.
*
*/
PREPACK struct htt_h2t_msg_rx_fse_operation_t {
A_UINT32 msg_type:8,
pdev_id:8,
reserved0:16;
A_UINT32 ipsec_valid:1,
operation:7,
reserved1:24;
A_UINT32 ip_src_addr_31_0;
A_UINT32 ip_src_addr_63_32;
A_UINT32 ip_src_addr_95_64;
A_UINT32 ip_src_addr_127_96;
A_UINT32 ip_dest_addr_31_0;
A_UINT32 ip_dest_addr_63_32;
A_UINT32 ip_dest_addr_95_64;
A_UINT32 ip_dest_addr_127_96;
union {
A_UINT32 spi;
struct {
A_UINT32 l4_src_port:16,
l4_dest_port:16;
} ip;
} u;
A_UINT32 l4_proto:8,
reserved:24;
} POSTPACK;
/**
* @brief Host-->target HTT RX Full monitor mode register configuration message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_RX_FULL_MONITOR_MODE
*
* @details
* The host will send this Full monitor mode register configuration message.
* This message can be sent per SOC or per PDEV which is differentiated
* by pdev id values.
*
* |31 16|15 11|10 8|7 3|2|1|0|
* |-------------------------------------------------------------|
* | reserved | pdev_id | MSG_TYPE |
* |-------------------------------------------------------------|
* | reserved |Release Ring |N|Z|E|
* |-------------------------------------------------------------|
*
* where E is 1-bit full monitor mode enable/disable.
* Z is 1-bit additional descriptor for zero mpdu enable/disable
* N is 1-bit additional descriptor for non zero mdpu enable/disable
*
* The following field definitions describe the format of the full monitor
* mode configuration message sent from the host to target for each pdev.
*
* Header fields:
* dword0 - b'7:0 - msg_type: This will be set to
* 0x17 (HTT_H2T_MSG_TYPE_RX_FULL_MONITOR_MODE)
* b'15:8 - pdev_id: 0 indicates msg is for all LMAC rings, i.e. soc
* 1, 2, 3 indicates pdev_id 0,1,2 and the msg is for the
* specified pdev's LMAC ring.
* b'31:16 - reserved : Reserved for future use.
* dword1 - b'0 - full_monitor_mode enable: This indicates that the full
* monitor mode rxdma register is to be enabled or disabled.
* b'1 - addnl_descs_zero_mpdus_end: This indicates that the
* additional descriptors at ppdu end for zero mpdus
* enabled or disabled.
* b'2 - addnl_descs_non_zero_mpdus_end: This indicates that the
* additional descriptors at ppdu end for non zero mpdus
* enabled or disabled.
* b'10:3 - release_ring: This indicates the destination ring
* selection for the descriptor at the end of PPDU
* 0 - REO ring select
* 1 - FW ring select
* 2 - SW ring select
* 3 - Release ring select
* Refer to htt_rx_full_mon_release_ring.
* b'31:11 - reserved for future use
*/
PREPACK struct htt_h2t_msg_rx_full_monitor_mode_t {
A_UINT32 msg_type:8,
pdev_id:8,
reserved0:16;
A_UINT32 full_monitor_mode_enable:1,
addnl_descs_zero_mpdus_end:1,
addnl_descs_non_zero_mpdus_end:1,
release_ring:8,
reserved1:21;
} POSTPACK;
/**
* Enumeration for full monitor mode destination ring select
* 0 - REO destination ring select
* 1 - FW destination ring select
* 2 - SW destination ring select
* 3 - Release destination ring select
*/
enum htt_rx_full_mon_release_ring {
HTT_RX_MON_RING_REO,
HTT_RX_MON_RING_FW,
HTT_RX_MON_RING_SW,
HTT_RX_MON_RING_RELEASE,
};
#define HTT_RX_FULL_MONITOR_MODE_SETUP_SZ (sizeof(struct htt_h2t_msg_rx_full_monitor_mode_t))
/* DWORD 0: Pdev ID */
#define HTT_RX_FULL_MONITOR_MODE_OPERATION_PDEV_ID_M 0x0000ff00
#define HTT_RX_FULL_MONITOR_MODE_OPERATION_PDEV_ID_S 8
#define HTT_RX_FULL_MONITOR_MODE_OPERATION_PDEV_ID_GET(_var) \
(((_var) & HTT_RX_FULL_MONITOR_MODE_OPERATION_PDEV_ID_M) >> \
HTT_RX_FULL_MONITOR_MODE_OPERATION_PDEV_ID_S)
#define HTT_RX_FULL_MONITOR_MODE_OPERATION_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FULL_MONITOR_MODE_OPERATION_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_RX_FULL_MONITOR_MODE_OPERATION_PDEV_ID_S)); \
} while (0)
/* DWORD 1:ENABLE */
#define HTT_RX_FULL_MONITOR_MODE_ENABLE_M 0x00000001
#define HTT_RX_FULL_MONITOR_MODE_ENABLE_S 0
#define HTT_RX_FULL_MONITOR_MODE_ENABLE_SET(word, enable) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FULL_MONITOR_MODE_ENABLE, enable); \
(word) |= ((enable) << HTT_RX_FULL_MONITOR_MODE_ENABLE_S); \
} while (0)
#define HTT_RX_FULL_MONITOR_MODE_ENABLE_GET(word) \
(((word) & HTT_RX_FULL_MONITOR_MODE_ENABLE_M) >> HTT_RX_FULL_MONITOR_MODE_ENABLE_S)
/* DWORD 1:ZERO_MPDU */
#define HTT_RX_FULL_MONITOR_MODE_ZERO_MPDU_M 0x00000002
#define HTT_RX_FULL_MONITOR_MODE_ZERO_MPDU_S 1
#define HTT_RX_FULL_MONITOR_MODE_ZERO_MPDU_SET(word, zerompdu) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FULL_MONITOR_MODE_ZERO_MPDU, zerompdu); \
(word) |= ((zerompdu) << HTT_RX_FULL_MONITOR_MODE_ZERO_MPDU_S); \
} while (0)
#define HTT_RX_FULL_MONITOR_MODE_ZERO_MPDU_GET(word) \
(((word) & HTT_RX_FULL_MONITOR_MODE_ZERO_MPDU_M) >> HTT_RX_FULL_MONITOR_MODE_ZERO_MPDU_S)
/* DWORD 1:NON_ZERO_MPDU */
#define HTT_RX_FULL_MONITOR_MODE_NON_ZERO_MPDU_M 0x00000004
#define HTT_RX_FULL_MONITOR_MODE_NON_ZERO_MPDU_S 2
#define HTT_RX_FULL_MONITOR_MODE_NON_ZERO_MPDU_SET(word, nonzerompdu) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FULL_MONITOR_MODE_NON_ZERO_MPDU, nonzerompdu); \
(word) |= ((nonzerompdu) << HTT_RX_FULL_MONITOR_MODE_NON_ZERO_MPDU_S); \
} while (0)
#define HTT_RX_FULL_MONITOR_MODE_NON_ZERO_MPDU_GET(word) \
(((word) & HTT_RX_FULL_MONITOR_MODE_NON_ZERO_MPDU_M) >> HTT_RX_FULL_MONITOR_MODE_NON_ZERO_MPDU_S)
/* DWORD 1:RELEASE_RINGS */
#define HTT_RX_FULL_MONITOR_MODE_RELEASE_RINGS_M 0x000007f8
#define HTT_RX_FULL_MONITOR_MODE_RELEASE_RINGS_S 3
#define HTT_RX_FULL_MONITOR_MODE_RELEASE_RINGS_SET(word, releaserings) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FULL_MONITOR_MODE_RELEASE_RINGS, releaserings); \
(word) |= ((releaserings) << HTT_RX_FULL_MONITOR_MODE_RELEASE_RINGS_S); \
} while (0)
#define HTT_RX_FULL_MONITOR_MODE_RELEASE_RINGS_GET(word) \
(((word) & HTT_RX_FULL_MONITOR_MODE_RELEASE_RINGS_M) >> HTT_RX_FULL_MONITOR_MODE_RELEASE_RINGS_S)
/**
* Enumeration for IP Protocol or IPSEC Protocol
* IPsec describes the framework for providing security at IP layer.
* IPsec is defined for both versions of IP: IPV4 and IPV6.
*/
enum htt_rx_flow_proto {
HTT_RX_FLOW_IP_PROTO,
HTT_RX_FLOW_IPSEC_PROTO,
};
/**
* Enumeration for FSE Cache Invalidation
* 0 - No Cache Invalidation required
* 1 - Cache invalidate only one entry given by IP src/dest address at DWORD2:9
* 2 - Complete FSE Cache Invalidation
* 3 - FSE Disable
* 4 - FSE Enable
*/
enum htt_rx_fse_operation {
HTT_RX_FSE_CACHE_INVALIDATE_NONE,
HTT_RX_FSE_CACHE_INVALIDATE_ENTRY,
HTT_RX_FSE_CACHE_INVALIDATE_FULL,
HTT_RX_FSE_DISABLE,
HTT_RX_FSE_ENABLE,
};
/* DWORD 0: Pdev ID */
#define HTT_RX_FSE_OPERATION_PDEV_ID_M 0x0000ff00
#define HTT_RX_FSE_OPERATION_PDEV_ID_S 8
#define HTT_RX_FSE_OPERATION_PDEV_ID_GET(_var) \
(((_var) & HTT_RX_FSE_OPERATION_PDEV_ID_M) >> \
HTT_RX_FSE_OPERATION_PDEV_ID_S)
#define HTT_RX_FSE_OPERATION_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_OPERATION_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_RX_FSE_OPERATION_PDEV_ID_S)); \
} while (0)
/* DWORD 1:IP PROTO or IPSEC */
#define HTT_RX_FSE_IPSEC_VALID_M 0x00000001
#define HTT_RX_FSE_IPSEC_VALID_S 0
#define HTT_RX_FSE_IPSEC_VALID_SET(word, ipsec_valid) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_IPSEC_VALID, ipsec_valid); \
(word) |= ((ipsec_valid) << HTT_RX_FSE_IPSEC_VALID_S); \
} while (0)
#define HTT_RX_FSE_IPSEC_VALID_GET(word) \
(((word) & HTT_RX_FSE_IPSEC_VALID_M) >> HTT_RX_FSE_IPSEC_VALID_S)
/* DWORD 1:FSE Operation */
#define HTT_RX_FSE_OPERATION_M 0x000000fe
#define HTT_RX_FSE_OPERATION_S 1
#define HTT_RX_FSE_OPERATION_SET(word, op_val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_OPERATION, op_val); \
(word) |= ((op_val) << HTT_RX_FSE_OPERATION_S); \
} while (0)
#define HTT_RX_FSE_OPERATION_GET(word) \
(((word) & HTT_RX_FSE_OPERATION_M) >> HTT_RX_FSE_OPERATION_S)
/* DWORD 2-9:IP Address */
#define HTT_RX_FSE_OPERATION_IP_ADDR_M 0xffffffff
#define HTT_RX_FSE_OPERATION_IP_ADDR_S 0
#define HTT_RX_FSE_OPERATION_IP_ADDR_GET(_var) \
(((_var) & HTT_RX_FSE_OPERATION_IP_ADDR_M) >> \
HTT_RX_FSE_OPERATION_IP_ADDR_S)
#define HTT_RX_FSE_OPERATION_IP_ADDR_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_OPERATION_IP_ADDR, _val); \
((_var) |= ((_val) << HTT_RX_FSE_OPERATION_IP_ADDR_S)); \
} while (0)
/* DWORD 10:Source Port Number */
#define HTT_RX_FSE_SOURCEPORT_M 0x0000ffff
#define HTT_RX_FSE_SOURCEPORT_S 0
#define HTT_RX_FSE_SOURCEPORT_SET(word, sport) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_SOURCEPORT, sport); \
(word) |= ((sport) << HTT_RX_FSE_SOURCEPORT_S); \
} while (0)
#define HTT_RX_FSE_SOURCEPORT_GET(word) \
(((word) & HTT_RX_FSE_SOURCEPORT_M) >> HTT_RX_FSE_SOURCEPORT_S)
/* DWORD 11:Destination Port Number */
#define HTT_RX_FSE_DESTPORT_M 0xffff0000
#define HTT_RX_FSE_DESTPORT_S 16
#define HTT_RX_FSE_DESTPORT_SET(word, dport) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_DESTPORT, dport); \
(word) |= ((dport) << HTT_RX_FSE_DESTPORT_S); \
} while (0)
#define HTT_RX_FSE_DESTPORT_GET(word) \
(((word) & HTT_RX_FSE_DESTPORT_M) >> HTT_RX_FSE_DESTPORT_S)
/* DWORD 10-11:SPI (In case of IPSEC) */
#define HTT_RX_FSE_OPERATION_SPI_M 0xffffffff
#define HTT_RX_FSE_OPERATION_SPI_S 0
#define HTT_RX_FSE_OPERATION_SPI_GET(_var) \
(((_var) & HTT_RX_FSE_OPERATION_SPI_ADDR_M) >> \
HTT_RX_FSE_OPERATION_SPI_ADDR_S)
#define HTT_RX_FSE_OPERATION_SPI_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_OPERATION_SPI, _val); \
((_var) |= ((_val) << HTT_RX_FSE_OPERATION_SPI_S)); \
} while (0)
/* DWORD 12:L4 PROTO */
#define HTT_RX_FSE_L4_PROTO_M 0x000000ff
#define HTT_RX_FSE_L4_PROTO_S 0
#define HTT_RX_FSE_L4_PROTO_SET(word, proto_val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FSE_L4_PROTO, proto_val); \
(word) |= ((proto_val) << HTT_RX_FSE_L4_PROTO_S); \
} while (0)
#define HTT_RX_FSE_L4_PROTO_GET(word) \
(((word) & HTT_RX_FSE_L4_PROTO_M) >> HTT_RX_FSE_L4_PROTO_S)
/**
* @brief host --> target Receive to configure the RxOLE 3-tuple Hash
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_3_TUPLE_HASH_CFG
*
* |31 24|23 |15 8|7 3|2|1|0|
* |----------------+----------------+----------------+----------------|
* | reserved | pdev_id | msg_type |
* |---------------------------------+----------------+----------------|
* | reserved |G|E|F|
* |---------------------------------+----------------+----------------|
* Where E = Configure the target to provide the 3-tuple hash value in
* toeplitz_hash_2_or_4 field of rx_msdu_start tlv
* F = Configure the target to provide the 3-tuple hash value in
* flow_id_toeplitz field of rx_msdu_start tlv
* G = Configure the target to provide the 3-tuple based flow
* classification search
*
* The following field definitions describe the format of the 3 tuple hash value
* message sent from the host to target as part of initialization sequence.
*
* Header fields:
* dword0 - b'7:0 - msg_type: This will be set to
* 0x16 (HTT_H2T_MSG_TYPE_3_TUPLE_HASH_CFG)
* b'15:8 - pdev_id: 0 indicates msg is for all LMAC rings, i.e. soc
* 1, 2, 3 indicates pdev_id 0,1,2 and the msg is for the
* specified pdev's LMAC ring.
* b'31:16 - reserved : Reserved for future use
* dword1 - b'0 - flow_id_toeplitz_field_enable
* b'1 - toeplitz_hash_2_or_4_field_enable
* b'2 - flow_classification_3_tuple_field_enable
* b'31:3 - reserved : Reserved for future use
* ---------+------+----------------------------------------------------------
* bit1 | bit0 | Functionality
* ---------+------+----------------------------------------------------------
* 0 | 1 | Configure the target to provide the 3 tuple hash value
* | | in flow_id_toeplitz field
* ---------+------+----------------------------------------------------------
* 1 | 0 | Configure the target to provide the 3 tuple hash value
* | | in toeplitz_hash_2_or_4 field
* ---------+------+----------------------------------------------------------
* 1 | 1 | Configure the target to provide the 3 tuple hash value
* | | in both flow_id_toeplitz & toeplitz_hash_2_or_4 field
* ---------+------+----------------------------------------------------------
* 0 | 0 | Configure the target to provide the 5 tuple hash value
* | | in flow_id_toeplitz field 2 or 4 tuple has value in
* | | toeplitz_hash_2_or_4 field
*----------------------------------------------------------------------------
*/
PREPACK struct htt_h2t_msg_rx_3_tuple_hash_cfg_t {
A_UINT32 msg_type :8,
pdev_id :8,
reserved0 :16;
A_UINT32 flow_id_toeplitz_field_enable :1,
toeplitz_hash_2_or_4_field_enable :1,
flow_classification_3_tuple_field_enable :1,
reserved1 :29;
} POSTPACK;
/* DWORD0 : pdev_id configuration Macros */
#define HTT_H2T_3_TUPLE_HASH_PDEV_ID_M 0xff00
#define HTT_H2T_3_TUPLE_HASH_PDEV_ID_S 8
#define HTT_RX_3_TUPLE_HASH_PDEV_ID_GET(_var) \
(((_var) & HTT_H2T_3_TUPLE_HASH_PDEV_ID_M) >> \
HTT_H2T_3_TUPLE_HASH_PDEV_ID_S)
#define HTT_RX_3_TUPLE_HASH_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_3_TUPLE_HASH_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_H2T_3_TUPLE_HASH_PDEV_ID_S)); \
} while (0)
/* DWORD1: rx 3 tuple hash value reception field configuration Macros */
#define HTT_H2T_FLOW_ID_TOEPLITZ_FIELD_CONFIG_M 0x00000001
#define HTT_H2T_FLOW_ID_TOEPLITZ_FIELD_CONFIG_S 0
#define HTT_FLOW_ID_TOEPLITZ_FIELD_CONFIG_GET(_var) \
(((_var) & HTT_H2T_FLOW_ID_TOEPLITZ_FIELD_CONFIG_M) >> \
HTT_H2T_FLOW_ID_TOEPLITZ_FIELD_CONFIG_S)
#define HTT_H2T_FLOW_ID_TOEPLITZ_FIELD_CONFIG_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_FLOW_ID_TOEPLITZ_FIELD_CONFIG, _val); \
((_var) |= ((_val) << HTT_H2T_FLOW_ID_TOEPLITZ_FIELD_CONFIG_S)); \
} while (0)
#define HTT_H2T_TOEPLITZ_2_OR_4_FIELD_CONFIG_M 0x00000002
#define HTT_H2T_TOEPLITZ_2_OR_4_FIELD_CONFIG_S 1
#define HTT_TOEPLITZ_2_OR_4_FIELD_CONFIG_GET(_var) \
(((_var) & HTT_H2T_TOEPLITZ_2_OR_4_FIELD_CONFIG_M) >> \
HTT_H2T_TOEPLITZ_2_OR_4_FIELD_CONFIG_S)
#define HTT_H2T_TOEPLITZ_2_OR_4_FIELD_CONFIG_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_TOEPLITZ_2_OR_4_FIELD_CONFIG, _val); \
((_var) |= ((_val) << HTT_H2T_TOEPLITZ_2_OR_4_FIELD_CONFIG_S)); \
} while (0)
#define HTT_H2T_FLOW_CLASSIFY_3_TUPLE_FIELD_ENABLE_M 0x00000004
#define HTT_H2T_FLOW_CLASSIFY_3_TUPLE_FIELD_ENABLE_S 2
#define HTT_FLOW_CLASSIFY_3_TUPLE_FIELD_ENABLE_GET(_var) \
(((_var) & HTT_H2T_FLOW_CLASSIFY_3_TUPLE_FIELD_ENABLE_M) >> \
HTT_H2T_FLOW_CLASSIFY_3_TUPLE_FIELD_ENABLE_S)
#define HTT_H2T_FLOW_CLASSIFY_3_TUPLE_FIELD_ENABLE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_FLOW_CLASSIFY_3_TUPLE_FIELD_ENABLE, _val); \
((_var) |= ((_val) << HTT_H2T_FLOW_CLASSIFY_3_TUPLE_FIELD_ENABLE_S)); \
} while (0)
#define HTT_3_TUPLE_HASH_CFG_REQ_BYTES 8
/**
* @brief host --> target Host PA Address Size
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_HOST_PADDR_SIZE
*
* @details
* The HTT_H2T_MSG_TYPE_HOST_PADDR_SIZE message is sent by the host to
* provide the physical start address and size of each of the memory
* areas within host DDR that the target FW may need to access.
*
* For example, the host can use this message to allow the target FW
* to set up access to the host's pools of TQM link descriptors.
* The message would appear as follows:
*
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | reserved | num_entries | msg_type |
* |-=-=-=-=-=-=-=-=+-=-=-=-=-=-=-=-=+=-=-=-=-=-=-=-=-+=-=-=-=-=-=-=-=-|
* | mem area 0 size |
* |----------------+----------------+----------------+----------------|
* | mem area 0 physical_address_lo |
* |----------------+----------------+----------------+----------------|
* | mem area 0 physical_address_hi |
* |-=-=-=-=-=-=-=-=+-=-=-=-=-=-=-=-=+=-=-=-=-=-=-=-=-+=-=-=-=-=-=-=-=-|
* | mem area 1 size |
* |----------------+----------------+----------------+----------------|
* | mem area 1 physical_address_lo |
* |----------------+----------------+----------------+----------------|
* | mem area 1 physical_address_hi |
* |----------------+----------------+----------------+----------------|
* ...
* |-=-=-=-=-=-=-=-=+-=-=-=-=-=-=-=-=+=-=-=-=-=-=-=-=-+=-=-=-=-=-=-=-=-|
* | mem area N size |
* |----------------+----------------+----------------+----------------|
* | mem area N physical_address_lo |
* |----------------+----------------+----------------+----------------|
* | mem area N physical_address_hi |
* |----------------+----------------+----------------+----------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to
* 0x18 (HTT_H2T_MSG_TYPE_HOST_PADDR_SIZE)
* b'8:15 - number_entries: Indicated the number of host memory
* areas specified within the remainder of the message
* b'16:31 - reserved.
* dword1 - b'0:31 - memory area 0 size in bytes
* dword2 - b'0:31 - memory area 0 physical address, lower 32 bits
* dword3 - b'0:31 - memory area 0 physical address, upper 32 bits
* and similar for memory area 1 through memory area N.
*/
PREPACK struct htt_h2t_host_paddr_size {
A_UINT32 msg_type: 8,
num_entries: 8,
reserved: 16;
} POSTPACK;
PREPACK struct htt_h2t_host_paddr_size_entry_t {
A_UINT32 size;
A_UINT32 physical_address_lo;
A_UINT32 physical_address_hi;
} POSTPACK;
#define HTT_H2T_HOST_PADDR_SIZE_ENTRY_SIZE \
(sizeof(struct htt_h2t_host_paddr_size_entry_t))
#define HTT_H2T_HOST_PADDR_SIZE_ENTRY_DWORDS \
(HTT_H2T_HOST_PADDR_SIZE_ENTRY_SIZE >> 2)
#define HTT_H2T_HOST_PADDR_SIZE_NUM_ENTRIES_M 0x0000FF00
#define HTT_H2T_HOST_PADDR_SIZE_NUM_ENTRIES_S 8
#define HTT_H2T_HOST_PADDR_SIZE_NUM_ENTRIES_GET(_var) \
(((_var) & HTT_H2T_HOST_PADDR_SIZE_NUM_ENTRIES_M) >> \
HTT_H2T_HOST_PADDR_SIZE_NUM_ENTRIES_S)
#define HTT_H2T_HOST_PADDR_SIZE_NUM_ENTRIES_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_HOST_PADDR_SIZE_NUM_ENTRIES, _val); \
((_var) |= ((_val) << HTT_H2T_HOST_PADDR_SIZE_NUM_ENTRIES_S)); \
} while (0)
/**
* @brief host --> target Host RXDMA RXOLE PPE register configuration
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_RXDMA_RXOLE_PPE_CFG
*
* @details
* The HTT_H2T_MSG_TYPE_RXDMA_RXOLE_PPE_CFG message is sent by the host to
* provide the PPE DS register confiuration for RXOLE and RXDMA.
*
* The message would appear as follows:
*
* |31 19|18 |17 |16 |15 |14 |13 9|8|7 0|
* |---------------------------------+---+---+----------+-+-----------|
* | reserved |IFO|DNO|DRO|IBO|MIO| RDI |O| msg_type |
* |---------------------+---+---+---+---+---+----------+-+-----------|
*
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to
* 0x19 (HTT_H2T_MSG_TYPE_RXDMA_RXOLE_PPE_CFG)
* b'8 - override bit to drive MSDUs to PPE ring
* b'9:13 - REO destination ring indication
* b'14 - Multi buffer msdu override enable bit
* b'15 - Intra BSS override
* b'16 - Decap raw override
* b'17 - Decap Native wifi override
* b'18 - IP frag override
* b'19:31 - reserved
*/
PREPACK struct htt_h2t_msg_type_rxdma_rxole_ppe_cfg_t {
A_UINT32 msg_type: 8, /* HTT_H2T_MSG_TYPE_RXDMA_RXOLE_PPE_CFG */
override: 1,
reo_destination_indication: 5,
multi_buffer_msdu_override_en: 1,
intra_bss_override: 1,
decap_raw_override: 1,
decap_nwifi_override: 1,
ip_frag_override: 1,
reserved: 13;
} POSTPACK;
/* DWORD 0: Override */
#define HTT_PPE_CFG_OVERRIDE_M 0x00000100
#define HTT_PPE_CFG_OVERRIDE_S 8
#define HTT_PPE_CFG_OVERRIDE_GET(_var) \
(((_var) & HTT_PPE_CFG_OVERRIDE_M) >> \
HTT_PPE_CFG_OVERRIDE_S)
#define HTT_PPE_CFG_OVERRIDE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPE_CFG_OVERRIDE, _val); \
((_var) |= ((_val) << HTT_PPE_CFG_OVERRIDE_S)); \
} while (0)
/* DWORD 0: REO Destination Indication*/
#define HTT_PPE_CFG_REO_DEST_IND_M 0x00003E00
#define HTT_PPE_CFG_REO_DEST_IND_S 9
#define HTT_PPE_CFG_REO_DEST_IND_GET(_var) \
(((_var) & HTT_PPE_CFG_REO_DEST_IND_M) >> \
HTT_PPE_CFG_REO_DEST_IND_S)
#define HTT_PPE_CFG_REO_DEST_IND_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPE_CFG_REO_DEST_IND, _val); \
((_var) |= ((_val) << HTT_PPE_CFG_REO_DEST_IND_S)); \
} while (0)
/* DWORD 0: Multi buffer MSDU override */
#define HTT_PPE_CFG_MULTI_BUF_MSDU_OVERRIDE_EN_M 0x00004000
#define HTT_PPE_CFG_MULTI_BUF_MSDU_OVERRIDE_EN_S 14
#define HTT_PPE_CFG_MULTI_BUF_MSDU_OVERRIDE_EN_GET(_var) \
(((_var) & HTT_PPE_CFG_MULTI_BUF_MSDU_OVERRIDE_EN_M) >> \
HTT_PPE_CFG_MULTI_BUF_MSDU_OVERRIDE_EN_S)
#define HTT_PPE_CFG_MULTI_BUF_MSDU_OVERRIDE_EN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPE_CFG_MULTI_BUF_MSDU_OVERRIDE_EN, _val); \
((_var) |= ((_val) << HTT_PPE_CFG_MULTI_BUF_MSDU_OVERRIDE_EN_S)); \
} while (0)
/* DWORD 0: Intra BSS override */
#define HTT_PPE_CFG_INTRA_BSS_OVERRIDE_EN_M 0x00008000
#define HTT_PPE_CFG_INTRA_BSS_OVERRIDE_EN_S 15
#define HTT_PPE_CFG_INTRA_BSS_OVERRIDE_EN_GET(_var) \
(((_var) & HTT_PPE_CFG_INTRA_BSS_OVERRIDE_EN_M) >> \
HTT_PPE_CFG_INTRA_BSS_OVERRIDE_EN_S)
#define HTT_PPE_CFG_INTRA_BSS_OVERRIDE_EN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPE_CFG_INTRA_BSS_OVERRIDE_EN, _val); \
((_var) |= ((_val) << HTT_PPE_CFG_INTRA_BSS_OVERRIDE_EN_S)); \
} while (0)
/* DWORD 0: Decap RAW override */
#define HTT_PPE_CFG_DECAP_RAW_OVERRIDE_EN_M 0x00010000
#define HTT_PPE_CFG_DECAP_RAW_OVERRIDE_EN_S 16
#define HTT_PPE_CFG_DECAP_RAW_OVERRIDE_EN_GET(_var) \
(((_var) & HTT_PPE_CFG_DECAP_RAW_OVERRIDE_EN_M) >> \
HTT_PPE_CFG_DECAP_RAW_OVERRIDE_EN_S)
#define HTT_PPE_CFG_DECAP_RAW_OVERRIDE_EN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPE_CFG_DECAP_RAW_OVERRIDE_EN, _val); \
((_var) |= ((_val) << HTT_PPE_CFG_DECAP_RAW_OVERRIDE_EN_S)); \
} while (0)
/* DWORD 0: Decap NWIFI override */
#define HTT_PPE_CFG_DECAP_NWIFI_OVERRIDE_EN_M 0x00020000
#define HTT_PPE_CFG_DECAP_NWIFI_OVERRIDE_EN_S 17
#define HTT_PPE_CFG_DECAP_NWIFI_OVERRIDE_EN_GET(_var) \
(((_var) & HTT_PPE_CFG_DECAP_NWIFI_OVERRIDE_EN_M) >> \
HTT_PPE_CFG_DECAP_NWIFI_OVERRIDE_EN_S)
#define HTT_PPE_CFG_DECAP_NWIFI_OVERRIDE_EN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPE_CFG_DECAP_NWIFI_OVERRIDE_EN, _val); \
((_var) |= ((_val) << HTT_PPE_CFG_DECAP_NWIFI_OVERRIDE_EN_S)); \
} while (0)
/* DWORD 0: IP frag override */
#define HTT_PPE_CFG_IP_FRAG_OVERRIDE_EN_M 0x00040000
#define HTT_PPE_CFG_IP_FRAG_OVERRIDE_EN_S 18
#define HTT_PPE_CFG_IP_FRAG_OVERRIDE_EN_GET(_var) \
(((_var) & HTT_PPE_CFG_IP_FRAG_OVERRIDE_EN_M) >> \
HTT_PPE_CFG_IP_FRAG_OVERRIDE_EN_S)
#define HTT_PPE_CFG_IP_FRAG_OVERRIDE_EN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPE_CFG_IP_FRAG_OVERRIDE_EN, _val); \
((_var) |= ((_val) << HTT_PPE_CFG_IP_FRAG_OVERRIDE_EN_S)); \
} while (0)
/*
* MSG_TYPE => HTT_H2T_MSG_TYPE_VDEVS_TXRX_STATS_CFG
*
* @details
* The following field definitions describe the format of the HTT host
* to target FW VDEV TX RX stats retrieve message.
* The message specifies the type of stats the host wants to retrieve.
*
* |31 27|26 25|24 17|16|15 8|7 0|
* |-----------------------------------------------------------|
* | rsvd | R | Periodic Int| E| pdev_id | msg type |
* |-----------------------------------------------------------|
* | vdev_id lower bitmask |
* |-----------------------------------------------------------|
* | vdev_id upper bitmask |
* |-----------------------------------------------------------|
* Header fields:
* Where:
* dword0 - b'7:0 - msg_type: This will be set to
* 0x1a (HTT_H2T_MSG_TYPE_VDEVS_TXRX_STATS_CFG)
* b'15:8 - pdev id
* b'16(E) - Enable/Disable the vdev HW stats
* b'17:24(PI) - Periodic Interval, units = 8 ms, e.g. 125 -> 1000 ms
* b'25:26(R) - Reset stats bits
* 0: don't reset stats
* 1: reset stats once
* 2: reset stats at the start of each periodic interval
* b'27:31 - reserved for future use
* dword1 - b'0:31 - vdev_id lower bitmask
* dword2 - b'0:31 - vdev_id upper bitmask
*/
PREPACK struct htt_h2t_vdevs_txrx_stats_cfg {
A_UINT32 msg_type :8,
pdev_id :8,
enable :1,
periodic_interval :8,
reset_stats_bits :2,
reserved0 :5;
A_UINT32 vdev_id_lower_bitmask;
A_UINT32 vdev_id_upper_bitmask;
} POSTPACK;
#define HTT_H2T_VDEVS_TXRX_STATS_PDEV_ID_M 0xFF00
#define HTT_H2T_VDEVS_TXRX_STATS_PDEV_ID_S 8
#define HTT_H2T_VDEVS_TXRX_STATS_PDEV_ID_GET(_var) \
(((_var) & HTT_H2T_VDEVS_TXRX_STATS_PDEV_ID_M) >> \
HTT_H2T_VDEVS_TXRX_STATS_PDEV_ID_S)
#define HTT_RX_VDEVS_TXRX_STATS_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_VDEVS_TXRX_STATS_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_H2T_VDEVS_TXRX_STATS_PDEV_ID_S)); \
} while (0)
#define HTT_H2T_VDEVS_TXRX_STATS_ENABLE_M 0x10000
#define HTT_H2T_VDEVS_TXRX_STATS_ENABLE_S 16
#define HTT_H2T_VDEVS_TXRX_STATS_ENABLE_GET(_var) \
(((_var) & HTT_H2T_VDEVS_TXRX_STATS_ENABLE_M) >> \
HTT_H2T_VDEVS_TXRX_STATS_ENABLE_S)
#define HTT_RX_VDEVS_TXRX_STATS_ENABLE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_VDEVS_TXRX_STATS_ENABLE, _val); \
((_var) |= ((_val) << HTT_H2T_VDEVS_TXRX_STATS_ENABLE_S)); \
} while (0)
#define HTT_H2T_VDEVS_TXRX_STATS_PERIODIC_INTERVAL_M 0x1FE0000
#define HTT_H2T_VDEVS_TXRX_STATS_PERIODIC_INTERVAL_S 17
#define HTT_H2T_VDEVS_TXRX_STATS_PERIODIC_INTERVAL_GET(_var) \
(((_var) & HTT_H2T_VDEVS_TXRX_STATS_PERIODIC_INTERVAL_M) >> \
HTT_H2T_VDEVS_TXRX_STATS_PERIODIC_INTERVAL_S)
#define HTT_RX_VDEVS_TXRX_STATS_PERIODIC_INTERVAL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_VDEVS_TXRX_STATS_PERIODIC_INTERVAL, _val); \
((_var) |= ((_val) << HTT_H2T_VDEVS_TXRX_STATS_PERIODIC_INTERVAL_S)); \
} while (0)
#define HTT_H2T_VDEVS_TXRX_STATS_RESET_STATS_BITS_M 0x6000000
#define HTT_H2T_VDEVS_TXRX_STATS_RESET_STATS_BITS_S 25
#define HTT_H2T_VDEVS_TXRX_STATS_RESET_STATS_BITS_GET(_var) \
(((_var) & HTT_H2T_VDEVS_TXRX_STATS_RESET_STATS_BITS_M) >> \
HTT_H2T_VDEVS_TXRX_STATS_RESET_STATS_BITS_S)
#define HTT_RX_VDEVS_TXRX_STATS_RESET_STATS_BITS_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_VDEVS_TXRX_STATS_RESET_STATS_BITS, _val); \
((_var) |= ((_val) << HTT_H2T_VDEVS_TXRX_STATS_RESET_STATS_BITS_S)); \
} while (0)
/*
* MSG_TYPE => HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ
*
* @details
* The SAWF_DEF_QUEUES_MAP_REQ message is sent by the host to link
* the default MSDU queues for one of the TIDs within the specified peer
* to the specified service class.
* The TID is indirectly specified - each service class is associated
* with a TID. All default MSDU queues for this peer-TID will be
* linked to the service class in question.
*
* |31 16|15 8|7 0|
* |------------------------------+--------------+--------------|
* | peer ID | svc class ID | msg type |
* |------------------------------------------------------------|
* Header fields:
* dword0 - b'7:0 - msg_type: This will be set to
* 0x1c (HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ)
* b'15:8 - service class ID
* b'31:16 - peer ID
*/
PREPACK struct htt_h2t_sawf_def_queues_map_req {
A_UINT32 msg_type :8,
svc_class_id :8,
peer_id :16;
} POSTPACK;
#define HTT_SAWF_DEF_QUEUES_MAP_REQ_BYTES 4
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_SVC_CLASS_ID_M 0x0000FF00
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_SVC_CLASS_ID_S 8
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_SVC_CLASS_ID_GET(_var) \
(((_var) & HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_SVC_CLASS_ID_M) >> \
HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_SVC_CLASS_ID_S)
#define HTT_RX_SAWF_DEF_QUEUES_MAP_REQ_SVC_CLASS_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_SVC_CLASS_ID, _val); \
((_var) |= ((_val) << HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_SVC_CLASS_ID_S));\
} while (0)
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_PEER_ID_M 0xFFFF0000
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_PEER_ID_S 16
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_PEER_ID_GET(_var) \
(((_var) & HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_PEER_ID_M) >> \
HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_PEER_ID_S)
#define HTT_RX_SAWF_DEF_QUEUES_MAP_REQ_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_PEER_ID, _val); \
((_var) |= ((_val) << HTT_H2T_SAWF_DEF_QUEUES_MAP_REQ_PEER_ID_S)); \
} while (0)
/*
* MSG_TYPE => HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ
*
* @details
* The SAWF_DEF_QUEUES_UNMAP_REQ message is sent by the host to
* remove the linkage of the specified peer-TID's MSDU queues to
* service classes.
*
* |31 16|15 8|7 0|
* |------------------------------+--------------+--------------|
* | peer ID | svc class ID | msg type |
* |------------------------------------------------------------|
* Header fields:
* dword0 - b'7:0 - msg_type: This will be set to
* 0x1d (HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ)
* b'15:8 - service class ID
* b'31:16 - peer ID
* A HTT_H2T_SAWF_DEF_QUEUES_UNMAP_PEER_ID_WILDCARD
* value for peer ID indicates that the target should
* apply the UNMAP_REQ to all peers.
*/
#define HTT_H2T_SAWF_DEF_QUEUES_UNMAP_PEER_ID_WILDCARD 0xff
PREPACK struct htt_h2t_sawf_def_queues_unmap_req {
A_UINT32 msg_type :8,
svc_class_id :8,
peer_id :16;
} POSTPACK;
#define HTT_SAWF_DEF_QUEUES_UNMAP_REQ_BYTES 4
#define HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_SVC_CLASS_ID_M 0x0000FF00
#define HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_SVC_CLASS_ID_S 8
#define HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_SVC_CLASS_ID_GET(word0) \
(((word0) & HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_SVC_CLASS_ID_M) >> \
HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_SVC_CLASS_ID_S)
#define HTT_RX_SAWF_DEF_QUEUES_UNMAP_REQ_SVC_CLASS_ID_SET(word0, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_SVC_CLASS_ID, _val); \
((word0) |= ((_val) << HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_SVC_CLASS_ID_S)); \
} while (0)
#define HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_PEER_ID_M 0xFFFF0000
#define HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_PEER_ID_S 16
#define HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_PEER_ID_GET(word0) \
(((word0) & HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_PEER_ID_M) >> \
HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_PEER_ID_S)
#define HTT_RX_SAWF_DEF_QUEUES_UNMAP_REQ_PEER_ID_SET(word0, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_PEER_ID, _val); \
((word0) |= ((_val) << HTT_H2T_SAWF_DEF_QUEUES_UNMAP_REQ_PEER_ID_S)); \
} while (0)
/*
* MSG_TYPE => HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ
*
* @details
* The SAWF_DEF_QUEUES_MAP_REPORT_REQ message is sent by the host to
* request the target to report what service class the default MSDU queues
* of the specified TIDs within the peer are linked to.
* The target will respond with a SAWF_DEF_QUEUES_MAP_REPORT_CONF message
* to report what service class (if any) the default MSDU queues for
* each of the specified TIDs are linked to.
*
* |31 16|15 8|7 1| 0|
* |------------------------------+--------------+--------------|
* | peer ID | TID mask | msg type |
* |------------------------------------------------------------|
* | reserved |ETO|
* |------------------------------------------------------------|
* Header fields:
* dword0 - b'7:0 - msg_type: This will be set to
* 0x1e (HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ)
* b'15:8 - TID mask
* b'31:16 - peer ID
* dword1 - b'0 - "Existing Tids Only" flag
* If this flag is set, the DEF_QUEUES_MAP_REPORT_CONF
* message generated by this REQ will only show the
* mapping for TIDs that actually exist in the target's
* peer object.
* Any TIDs that are covered by a MAP_REQ but which
* do not actually exist will be shown as being
* unmapped (i.e. svc class ID 0xff).
* If this flag is cleared, the MAP_REPORT_CONF message
* will consider not only the mapping of TIDs currently
* existing in the peer, but also the mapping that will
* be applied for any TID objects created within this
* peer in the future.
* b'31:1 - reserved for future use
*/
PREPACK struct htt_h2t_sawf_def_queues_map_report_req {
A_UINT32 msg_type :8,
tid_mask :8,
peer_id :16;
A_UINT32 existing_tids_only:1,
reserved :31;
} POSTPACK;
#define HTT_SAWF_DEF_QUEUES_MAP_REPORT_REQ_BYTES 8
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_TID_MASK_M 0x0000FF00
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_TID_MASK_S 8
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_TID_MASK_GET(word0) \
(((word0) & HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_TID_MASK_M) >> \
HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_TID_MASK_S)
#define HTT_RX_SAWF_DEF_QUEUES_MAP_REPORT_REQ_TID_MASK_SET(word0, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_TID_MASK, _val); \
((word0) |= ((_val) << HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_TID_MASK_S));\
} while (0)
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_PEER_ID_M 0xFFFF0000
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_PEER_ID_S 16
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_PEER_ID_GET(word0) \
(((word0) & HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_PEER_ID_M) >> \
HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_PEER_ID_S)
#define HTT_RX_SAWF_DEF_QUEUES_MAP_REPORT_REQ_PEER_ID_SET(word0, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_PEER_ID, _val); \
((word0) |= ((_val) << HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_PEER_ID_S)); \
} while (0)
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_EXISTING_TIDS_ONLY_M 0x00000001
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_EXISTING_TIDS_ONLY_S 0
#define HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_EXISTING_TIDS_ONLY_GET(word1) \
(((word1) & HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_EXISTING_TIDS_ONLY_M) >> \
HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_EXISTING_TIDS_ONLY_S)
#define HTT_RX_SAWF_DEF_QUEUES_MAP_REPORT_REQ_EXISTING_TIDS_ONLY_SET(word1, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_EXISTING_TIDS_ONLY, _val); \
((word1) |= ((_val) << HTT_H2T_SAWF_DEF_QUEUES_MAP_REPORT_REQ_EXISTING_TIDS_ONLY_S)); \
} while (0)
/**
* @brief Format of shared memory between Host and Target
* for UMAC recovery feature messaging.
* @details
* This is shared memory between Host and Target allocated
* and used in chips where UMAC recovery feature is supported.
* This shared memory is allocated per SOC level by Host since each
* SOC's target Q6FW needs to communicate independently to the Host
* through its own shared memory.
* If target sets a bit in t2h_msg (provided it's valid bit offset)
* then host interprets it as a new message from target.
* Host clears that particular read bit in t2h_msg after each read
* operation. It is vice versa for h2t_msg. At any given point
* of time there is expected to be only one bit set
* either in t2h_msg or h2t_msg (referring to valid bit offset).
*
* The message is interpreted as follows:
* dword0 - b'0:31 - magic_num: Magic number for the shared memory region
* added for debuggability purpose.
* dword1 - b'0 - do_pre_reset
* b'1 - do_post_reset_start
* b'2 - do_post_reset_complete
* b'3 - initiate_umac_recovery
* b'4 - initiate_target_recovery_sync_using_umac
* b'5:31 - rsvd_t2h
* dword2 - b'0 - pre_reset_done
* b'1 - post_reset_start_done
* b'2 - post_reset_complete_done
* b'3 - start_pre_reset (deprecated)
* b'4:31 - rsvd_h2t
*/
PREPACK typedef struct {
/** Magic number added for debuggability. */
A_UINT32 magic_num;
union {
/*
* BIT [0] :- T2H msg to do pre-reset
* BIT [1] :- T2H msg to do post-reset start
* BIT [2] :- T2H msg to do post-reset complete
* BIT [3] :- T2H msg to indicate to Host that
* a trigger request for MLO UMAC Recovery
* is received for UMAC hang.
* BIT [4] :- T2H msg to indicate to Host that
* a trigger request for MLO UMAC Recovery
* is received for Mode-1 Target Recovery.
* BIT [31 : 5] :- reserved
*/
A_UINT32 t2h_msg;
struct {
A_UINT32
do_pre_reset: 1, /* BIT [0] */
do_post_reset_start: 1, /* BIT [1] */
do_post_reset_complete: 1, /* BIT [2] */
initiate_umac_recovery: 1, /* BIT [3] */
initiate_target_recovery_sync_using_umac: 1, /* BIT [4] */
rsvd_t2h: 27; /* BIT [31:5] */
};
};
union {
/*
* BIT [0] :- H2T msg to send pre-reset done
* BIT [1] :- H2T msg to send post-reset start done
* BIT [2] :- H2T msg to send post-reset complete done
* BIT [3] :- H2T msg to start pre-reset. This is deprecated.
* BIT [31 : 4] :- reserved
*/
A_UINT32 h2t_msg;
struct {
A_UINT32 pre_reset_done : 1, /* BIT [0] */
post_reset_start_done : 1, /* BIT [1] */
post_reset_complete_done : 1, /* BIT [2] */
start_pre_reset : 1, /* BIT [3] */
rsvd_h2t : 28; /* BIT [31 : 4] */
};
};
} POSTPACK htt_umac_hang_recovery_msg_shmem_t;
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_BYTES \
(sizeof(htt_umac_hang_recovery_msg_shmem_t))
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DWORDS \
(HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_BYTES >> 2)
/* dword1 - b'0 - do_pre_reset */
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_PRE_RESET_M 0x00000001
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_PRE_RESET_S 0
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_PRE_RESET_GET(word1) \
(((word1) & HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_PRE_RESET_M) >> \
HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_PRE_RESET_S)
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_PRE_RESET_SET(word1, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_PRE_RESET, _val); \
((word1) |= ((_val) << HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_PRE_RESET_S));\
} while (0)
/* dword1 - b'1 - do_post_reset_start */
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_START_M 0x00000002
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_START_S 1
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_START_GET(word1) \
(((word1) & HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_START_M) >> \
HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_START_S)
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_START_SET(word1, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_START, _val); \
((word1) |= ((_val) << HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_START_S));\
} while (0)
/* dword1 - b'2 - do_post_reset_complete */
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_COMPLETE_M 0x00000004
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_COMPLETE_S 2
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_COMPLETE_GET(word1) \
(((word1) & HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_COMPLETE_M) >> \
HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_COMPLETE_S)
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_COMPLETE_SET(word1, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_COMPLETE, _val); \
((word1) |= ((_val) << HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_DO_POST_RESET_COMPLETE_S));\
} while (0)
/* dword1 - b'3 - initiate_umac_recovery */
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_UMAC_RECOVERY_M 0x00000008
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_UMAC_RECOVERY_S 3
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_UMAC_RECOVERY_GET(word1) \
(((word1) & HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_UMAC_RECOVERY_M) >> \
HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_UMAC_RECOVERY_S)
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_UMAC_RECOVERY_SET(word1, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_UMAC_RECOVERY, _val); \
((word1) |= ((_val) << HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_UMAC_RECOVERY_S));\
} while (0)
/* dword1 - b'4 - initiate_target_recovery_sync_using_umac */
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_TARGET_RECOVERY_SYNC_USING_UMAC_M 0x00000010
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_TARGET_RECOVERY_SYNC_USING_UMAC_S 4
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_TARGET_RECOVERY_SYNC_USING_UMAC_GET(word1) \
(((word1) & HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_TARGET_RECOVERY_SYNC_USING_UMAC_M) >> \
HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_TARGET_RECOVERY_SYNC_USING_UMAC_S)
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_TARGET_RECOVERY_SYNC_USING_UMAC_SET(word1, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_TARGET_RECOVERY_SYNC_USING_UMAC, _val); \
((word1) |= ((_val) << HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_INITIATE_TARGET_RECOVERY_SYNC_USING_UMAC_S));\
} while (0)
/* dword2 - b'0 - pre_reset_done */
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_PRE_RESET_DONE_M 0x00000001
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_PRE_RESET_DONE_S 0
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_PRE_RESET_DONE_GET(word2) \
(((word2) & HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_PRE_RESET_DONE_M) >> \
HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_PRE_RESET_DONE_S)
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_PRE_RESET_DONE_SET(word2, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_PRE_RESET_DONE, _val); \
((word2) |= ((_val) << HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_PRE_RESET_DONE_S));\
} while (0)
/* dword2 - b'1 - post_reset_start_done */
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_START_DONE_M 0x00000002
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_START_DONE_S 1
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_START_DONE_GET(word2) \
(((word2) & HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_START_DONE_M) >> \
HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_START_DONE_S)
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_START_DONE_SET(word2, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_START_DONE, _val); \
((word2) |= ((_val) << HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_START_DONE_S));\
} while (0)
/* dword2 - b'2 - post_reset_complete_done */
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_COMPLETE_DONE_M 0x00000004
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_COMPLETE_DONE_S 2
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_COMPLETE_DONE_GET(word2) \
(((word2) & HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_COMPLETE_DONE_M) >> \
HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_COMPLETE_DONE_S)
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_COMPLETE_DONE_SET(word2, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_COMPLETE_DONE, _val); \
((word2) |= ((_val) << HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_POST_RESET_COMPLETE_DONE_S));\
} while (0)
/* dword2 - b'3 - start_pre_reset */
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_START_PRE_RESET_M 0x00000008
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_START_PRE_RESET_S 3
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_START_PRE_RESET_GET(word2) \
(((word2) & HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_START_PRE_RESET_M) >> \
HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_START_PRE_RESET_S)
#define HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_START_PRE_RESET_SET(word2, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_START_PRE_RESET, _val); \
((word2) |= ((_val) << HTT_UMAC_HANG_RECOVERY_MSG_SHMEM_START_PRE_RESET_S));\
} while (0)
/**
* @brief HTT_H2T_MSG_TYPE_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP message
*
* @details
* The HTT_H2T_MSG_TYPE_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP message is sent
* by the host to provide prerequisite info to target for the UMAC hang
* recovery feature.
* The info sent in this H2T message are T2H message method, H2T message
* method, T2H MSI interrupt number and physical start address, size of
* the shared memory (refers to the shared memory dedicated for messaging
* between host and target when the DUT is in UMAC hang recovery mode).
* This H2T message is expected to be only sent if the WMI service bit
* WMI_SERVICE_UMAC_HANG_RECOVERY_SUPPORT was firstly indicated by the target.
*
* |31 16|15 12|11 8|7 0|
* |-------------------------------+--------------+--------------+------------|
* | reserved |h2t msg method|t2h msg method| msg_type |
* |--------------------------------------------------------------------------|
* | t2h msi interrupt number |
* |--------------------------------------------------------------------------|
* | shared memory area size |
* |--------------------------------------------------------------------------|
* | shared memory area physical address low |
* |--------------------------------------------------------------------------|
* | shared memory area physical address high |
* |--------------------------------------------------------------------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type
* (HTT_H2T_MSG_TYPE_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP)
* b'8:11 - t2h_msg_method: indicates method to be used for
* T2H communication in UMAC hang recovery mode.
* Value zero indicates MSI interrupt (default method).
* Refer to htt_umac_hang_recovery_msg_method enum.
* b'12:15 - h2t_msg_method: indicates method to be used for
* H2T communication in UMAC hang recovery mode.
* Value zero indicates polling by target for this h2t msg
* during UMAC hang recovery mode.
* Refer to htt_umac_hang_recovery_msg_method enum.
* b'16:31 - reserved.
* dword1 - b'0:31 - t2h_msi_data: MSI data to be used for
* T2H communication in UMAC hang recovery mode.
* dword2 - b'0:31 - size: size of shared memory dedicated for messaging
* only when in UMAC hang recovery mode.
* This refers to size in bytes.
* dword3 - b'0:31 - physical_address_lo: lower 32 bit physical address
* of the shared memory dedicated for messaging only when
* in UMAC hang recovery mode.
* dword4 - b'0:31 - physical_address_hi: higher 32 bit physical address
* of the shared memory dedicated for messaging only when
* in UMAC hang recovery mode.
*/
/* t2h_msg_method and h2t_msg_method */
enum htt_umac_hang_recovery_msg_method {
htt_umac_hang_recovery_msg_t2h_msi_and_h2t_polling = 0,
};
PREPACK typedef struct {
A_UINT32 msg_type : 8,
t2h_msg_method : 4,
h2t_msg_method : 4,
reserved : 16;
A_UINT32 t2h_msi_data;
/* size bytes and physical address of shared memory. */
struct htt_h2t_host_paddr_size_entry_t msg_shared_mem;
} POSTPACK htt_h2t_umac_hang_recovery_prerequisite_setup_t;
#define HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_BYTES \
(sizeof(htt_h2t_umac_hang_recovery_prerequisite_setup_t))
#define HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_DWORDS \
(HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_BYTES >> 2)
#define HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_T2H_MSG_METHOD_M 0x00000F00
#define HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_T2H_MSG_METHOD_S 8
#define HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_T2H_MSG_METHOD_GET(word0) \
(((word0) & HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_T2H_MSG_METHOD_M) >> \
HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_T2H_MSG_METHOD_S)
#define HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_T2H_MSG_METHOD_SET(word0, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_T2H_MSG_METHOD, _val); \
((word0) |= ((_val) << HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_T2H_MSG_METHOD_S));\
} while (0)
#define HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_H2T_MSG_METHOD_M 0x0000F000
#define HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_H2T_MSG_METHOD_S 12
#define HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_H2T_MSG_METHOD_GET(word0) \
(((word0) & HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_H2T_MSG_METHOD_M) >> \
HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_H2T_MSG_METHOD_S)
#define HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_H2T_MSG_METHOD_SET(word0, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_H2T_MSG_METHOD, _val); \
((word0) |= ((_val) << HTT_H2T_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP_H2T_MSG_METHOD_S));\
} while (0)
/**
* @brief HTT_H2T_MSG_TYPE_UMAC_HANG_RECOVERY_SOC_START_PRE_RESET message
*
* @details
* The HTT_H2T_MSG_TYPE_UMAC_HANG_RECOVERY_SOC_START_PRE_RESET is a SOC level
* HTT message sent by the host to indicate that the target needs to start the
* UMAC hang recovery feature from the point of pre-reset routine.
* The purpose of this H2T message is to have host synchronize and trigger
* UMAC recovery across all targets.
* The info sent in this H2T message is the flag to indicate whether the
* target needs to execute UMAC-recovery in context of the Initiator or
* Non-Initiator.
* This H2T message is expected to be sent as response to the
* initiate_umac_recovery indication from the Initiator target attached to
* this same host.
* This H2T message is expected to be only sent if the WMI service bit
* WMI_SERVICE_UMAC_HANG_RECOVERY_SUPPORT was firstly indicated by the target
* and HTT_H2T_MSG_TYPE_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP was sent
* beforehand.
*
* |31 10|9|8|7 0|
* |-----------------------------------------------------------|
* | reserved |U|I| msg_type |
* |-----------------------------------------------------------|
* Where:
* I = is_initiator
* U = is_umac_hang
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type
* (HTT_H2T_MSG_TYPE_UMAC_HANG_RECOVERY_SOC_START_PRE_RESET)
* b'8 - is_initiator: indicates whether the target needs to
* execute the UMAC-recovery in context of the Initiator or
* Non-Initiator.
* The value zero indicates this target is Non-Initiator.
* b'9 - is_umac_hang: indicates whether MLO UMAC recovery
* executed in context of UMAC hang or Target recovery.
* b'10:31 - reserved.
*/
PREPACK typedef struct {
A_UINT32 msg_type : 8,
is_initiator : 1,
is_umac_hang : 1,
reserved : 22;
} POSTPACK htt_h2t_umac_hang_recovery_start_pre_reset_t;
#define HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_BYTES \
(sizeof(htt_h2t_umac_hang_recovery_start_pre_reset_t))
#define HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_DWORDS \
(HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_BYTES >> 2)
#define HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_INITIATOR_M 0x00000100
#define HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_INITIATOR_S 8
#define HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_INITIATOR_GET(word0) \
(((word0) & HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_INITIATOR_M) >> \
HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_INITIATOR_S)
#define HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_INITIATOR_SET(word0, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_INITIATOR, _val); \
((word0) |= ((_val) << HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_INITIATOR_S));\
} while (0)
#define HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_UMAC_HANG_M 0x00000200
#define HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_UMAC_HANG_S 9
#define HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_UMAC_HANG_GET(word0) \
(((word0) & HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_UMAC_HANG_M) >> \
HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_UMAC_HANG_S)
#define HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_UMAC_HANG_SET(word0, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_UMAC_HANG, _val); \
((word0) |= ((_val) << HTT_H2T_UMAC_HANG_RECOVERY_START_PRE_RESET_IS_UMAC_HANG_S));\
} while (0)
/*
* @brief host -> target HTT RX_CCE_SUPER_RULE_SETUP message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_RX_CCE_SUPER_RULE_SETUP
*
* @details
* Host sends RX_CCE_SUPER_RULE setup message to target, in order to request,
* install or uninstall rx cce super rules to match certain kind of packets
* with specific parameters. Target sets up HW registers based on setup message
* and always confirms back to Host.
*
* The message would appear as follows:
* |31 24|23 16|15 8|7 0|
* |-----------------+-----------------+-----------------+-----------------|
* | reserved | operation | pdev_id | msg_type |
* |-----------------------------------------------------------------------|
* | cce_super_rule_param[0] |
* |-----------------------------------------------------------------------|
* | cce_super_rule_param[1] |
* |-----------------------------------------------------------------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to
* 0x23 (HTT_H2T_MSG_TYPE_RX_CCE_SUPER_RULE_SETUP)
* b'8:15 - pdev_id: Identify which pdev RX_CCE_SUPER_RULE is for
* b'16:23 - operation: Identify operation to be taken,
* 0: HTT_RX_CCE_SUPER_RULE_SETUP_REQUEST
* 1: HTT_RX_CCE_SUPER_RULE_INSTALL
* 2: HTT_RX_CCE_SUPER_RULE_RELEASE
* b'24:31 - reserved
* dword1~10 - cce_super_rule_param[0]:
* contains parameters used to setup RX_CCE_SUPER_RULE_0
* dword11~20 - cce_super_rule_param[1]:
* contains parameters used to setup RX_CCE_SUPER_RULE_1
*
* Each cce_super_rule_param structure would appear as follows:
* |31 24|23 16|15 8|7 0|
* |-----------------+-----------------+-----------------+-----------------|
* |src_ipv6_addr[3] |src_ipv6_addr[2] |src_ipv6_addr[1] |src_ipv6_addr[0] |
* |/src_ipv4_addr[3]|/src_ipv4_addr[2]|/src_ipv4_addr[1]|/src_ipv4_addr[0]|
* |-----------------------------------------------------------------------|
* |src_ipv6_addr[7] |src_ipv6_addr[6] |src_ipv6_addr[5] |src_ipv6_addr[4] |
* |-----------------------------------------------------------------------|
* |src_ipv6_addr[11]|src_ipv6_addr[10]|src_ipv6_addr[9] |src_ipv6_addr[8] |
* |-----------------------------------------------------------------------|
* |src_ipv6_addr[15]|src_ipv6_addr[14]|src_ipv6_addr[13]|src_ipv6_addr[12]|
* |-----------------------------------------------------------------------|
* |dst_ipv6_addr[3] |dst_ipv6_addr[2] |dst_ipv6_addr[1] |dst_ipv6_addr[0] |
* |/dst_ipv4_addr[3]|/dst_ipv4_addr[2]|/dst_ipv4_addr[1]|/dst_ipv4_addr[0]|
* |-----------------------------------------------------------------------|
* |dst_ipv6_addr[7] |dst_ipv6_addr[6] |dst_ipv6_addr[5] |dst_ipv6_addr[4] |
* |-----------------------------------------------------------------------|
* |dst_ipv6_addr[11]|dst_ipv6_addr[10]|dst_ipv6_addr[9] |dst_ipv6_addr[8] |
* |-----------------------------------------------------------------------|
* |dst_ipv6_addr[15]|dst_ipv6_addr[14]|dst_ipv6_addr[13]|dst_ipv6_addr[12]|
* |-----------------------------------------------------------------------|
* | is_valid | l4_type | l3_type |
* |-----------------------------------------------------------------------|
* | l4_dst_port | l4_src_port |
* |-----------------------------------------------------------------------|
*
* The cce_super_rule_param[0] structure is interpreted as follows:
* dword1 - b'0:7 - src_ipv6_addr[0]: b'120:127 of source ipv6 address
* (or src_ipv4_addr[0]: b'24:31 of source ipv4 address,
* in case of ipv4)
* b'8:15 - src_ipv6_addr[1]: b'112:119 of source ipv6 address
* (or src_ipv4_addr[1]: b'16:23 of source ipv4 address,
* in case of ipv4)
* b'16:23 - src_ipv6_addr[2]: b'104:111 of source ipv6 address
* (or src_ipv4_addr[2]: b'8:15 of source ipv4 address,
* in case of ipv4)
* b'24:31 - src_ipv6_addr[3]: b'96:103 of source ipv6 address
* (or src_ipv4_addr[3]: b'0:7 of source ipv4 address,
* in case of ipv4)
* dword2 - b'0:7 - src_ipv6_addr[4]: b'88:95 of source ipv6 address
* b'8:15 - src_ipv6_addr[5]: b'80:87 of source ipv6 address
* b'16:23 - src_ipv6_addr[6]: b'72:79 of source ipv6 address
* b'24:31 - src_ipv6_addr[7]: b'64:71 of source ipv6 address
* dword3 - b'0:7 - src_ipv6_addr[8]: b'56:63 of source ipv6 address
* b'8:15 - src_ipv6_addr[9]: b'48:55 of source ipv6 address
* b'16:23 - src_ipv6_addr[10]: b'40:47 of source ipv6 address
* b'24:31 - src_ipv6_addr[11]: b'32:39 of source ipv6 address
* dword4 - b'0:7 - src_ipv6_addr[12]: b'24:31 of source ipv6 address
* b'8:15 - src_ipv6_addr[13]: b'16:23 of source ipv6 address
* b'16:23 - src_ipv6_addr[14]: b'8:15 of source ipv6 address
* b'24:31 - src_ipv6_addr[15]: b'0:7 of source ipv6 address
* dword5 - b'0:7 - dst_ipv6_addr[0]: b'120:127 of destination ipv6 address
* (or dst_ipv4_addr[0]: b'24:31 of destination
* ipv4 address, in case of ipv4)
* b'8:15 - dst_ipv6_addr[1]: b'112:119 of destination ipv6 address
* (or dst_ipv4_addr[1]: b'16:23 of destination
* ipv4 address, in case of ipv4)
* b'16:23 - dst_ipv6_addr[2]: b'104:111 of destination ipv6 address
* (or dst_ipv4_addr[2]: b'8:15 of destination
* ipv4 address, in case of ipv4)
* b'24:31 - dst_ipv6_addr[3]: b'96:103 of destination ipv6 address
* (or dst_ipv4_addr[3]: b'0:7 of destination
* ipv4 address, in case of ipv4)
* dword6 - b'0:7 - dst_ipv6_addr[4]: b'88:95 of destination ipv6 address
* b'8:15 - dst_ipv6_addr[5]: b'80:87 of destination ipv6 address
* b'16:23 - dst_ipv6_addr[6]: b'72:79 of destination ipv6 address
* b'24:31 - dst_ipv6_addr[7]: b'64:71 of destination ipv6 address
* dword7 - b'0:7 - dst_ipv6_addr[8]: b'56:63 of destination ipv6 address
* b'8:15 - dst_ipv6_addr[9]: b'48:55 of destination ipv6 address
* b'16:23 - dst_ipv6_addr[10]: b'40:47 of destination ipv6 address
* b'24:31 - dst_ipv6_addr[11]: b'32:39 of destination ipv6 address
* dword8 - b'0:7 - dst_ipv6_addr[12]: b'24:31 of destination ipv6 address
* b'8:15 - dst_ipv6_addr[13]: b'16:23 of destination ipv6 address
* b'16:23 - dst_ipv6_addr[14]: b'8:15 of destination ipv6 address
* b'24:31 - dst_ipv6_addr[15]: b'0:7 of destination ipv6 address
* dword9 - b'0:15 - l3_type: type of L3 protocol, indicating L3 protocol used
* 0x0008: ipv4
* 0xdd86: ipv6
* b'16:23 - l4_type: type of L4 protocol, indicating L4 protocol used
* 6: TCP
* 17: UDP
* b'24:31 - is_valid: indicate whether this parameter is valid
* 0: invalid
* 1: valid
* dword10 - b'0:15 - l4_src_port: TCP/UDP source port field
* b'16:31 - l4_dst_port: TCP/UDP destination port field
*
* The cce_super_rule_param[1] structure is similar.
*/
#define HTT_RX_CCE_SUPER_RULE_SETUP_NUM 2
enum htt_rx_cce_super_rule_setup_operation {
HTT_RX_CCE_SUPER_RULE_SETUP_REQUEST = 0,
HTT_RX_CCE_SUPER_RULE_INSTALL,
HTT_RX_CCE_SUPER_RULE_RELEASE,
/* All operation should be before this */
HTT_RX_CCE_SUPER_RULE_SETUP_INVALID_OPERATION,
};
typedef struct {
union {
A_UINT8 src_ipv4_addr[4];
A_UINT8 src_ipv6_addr[16];
};
union {
A_UINT8 dst_ipv4_addr[4];
A_UINT8 dst_ipv6_addr[16];
};
A_UINT32 l3_type: 16,
l4_type: 8,
is_valid: 8;
A_UINT32 l4_src_port: 16,
l4_dst_port: 16;
} htt_rx_cce_super_rule_param_t;
PREPACK struct htt_rx_cce_super_rule_setup_t {
A_UINT32 msg_type: 8,
pdev_id: 8,
operation: 8,
reserved: 8;
htt_rx_cce_super_rule_param_t
cce_super_rule_param[HTT_RX_CCE_SUPER_RULE_SETUP_NUM];
} POSTPACK;
#define HTT_RX_CCE_SUPER_RULE_SETUP_SZ \
(sizeof(struct htt_rx_cce_super_rule_setup_t))
#define HTT_RX_CCE_SUPER_RULE_SETUP_PDEV_ID_M 0x0000ff00
#define HTT_RX_CCE_SUPER_RULE_SETUP_PDEV_ID_S 8
#define HTT_RX_CCE_SUPER_RULE_SETUP_PDEV_ID_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_PDEV_ID_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_PDEV_ID_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_PDEV_ID_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_OPERATION_M 0x00ff0000
#define HTT_RX_CCE_SUPER_RULE_SETUP_OPERATION_S 16
#define HTT_RX_CCE_SUPER_RULE_SETUP_OPERATION_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_OPERATION_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_OPERATION_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_OPERATION_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_OPERATION, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_OPERATION_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_L3_TYPE_M 0x0000ffff
#define HTT_RX_CCE_SUPER_RULE_SETUP_L3_TYPE_S 0
#define HTT_RX_CCE_SUPER_RULE_SETUP_L3_TYPE_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_L3_TYPE_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_L3_TYPE_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_L3_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_L3_TYPE, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_L3_TYPE_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_L4_TYPE_M 0x00ff0000
#define HTT_RX_CCE_SUPER_RULE_SETUP_L4_TYPE_S 16
#define HTT_RX_CCE_SUPER_RULE_SETUP_L4_TYPE_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_L4_TYPE_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_L4_TYPE_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_L4_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_L4_TYPE, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_L4_TYPE_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_IS_VALID_M 0xff000000
#define HTT_RX_CCE_SUPER_RULE_SETUP_IS_VALID_S 24
#define HTT_RX_CCE_SUPER_RULE_SETUP_IS_VALID_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_IS_VALID_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_IS_VALID_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_IS_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_IS_VALID, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_IS_VALID_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_L4_SRC_PORT_M 0x0000ffff
#define HTT_RX_CCE_SUPER_RULE_SETUP_L4_SRC_PORT_S 0
#define HTT_RX_CCE_SUPER_RULE_SETUP_L4_SRC_PORT_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_L4_SRC_PORT_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_L4_SRC_PORT_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_L4_SRC_PORT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_L4_SRC_PORT, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_L4_SRC_PORT_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_L4_DST_PORT_M 0xffff0000
#define HTT_RX_CCE_SUPER_RULE_SETUP_L4_DST_PORT_S 16
#define HTT_RX_CCE_SUPER_RULE_SETUP_L4_DST_PORT_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_L4_DST_PORT_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_L4_DST_PORT_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_L4_DST_PORT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_L4_DST_PORT, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_L4_DST_PORT_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_IPV4_ADDR_ARRAY_GET(_ptr, _array) \
do { \
A_MEMCPY(_array, _ptr, 4); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_IPV4_ADDR_ARRAY_SET(_ptr, _array) \
do { \
A_MEMCPY(_ptr, _array, 4); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_IPV6_ADDR_ARRAY_GET(_ptr, _array) \
do { \
A_MEMCPY(_array, _ptr, 16); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_IPV6_ADDR_ARRAY_SET(_ptr, _array) \
do { \
A_MEMCPY(_ptr, _array, 16); \
} while (0)
/*
* @brief host -> target HTT TX_LCE_SUPER_RULE_SETUP message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_TX_LCE_SUPER_RULE_SETUP
*
* @details
* Host sends TX_SUPER_RULE setup message to target, in order to request,
* install, or uninstall tx super rules to match certain kind of packets
* with specific parameters. Target sets up HW registers based on setup
* message and always confirms back to host (by sending a T2H
* TX_LCE_SUPER_RULE_SETUP_DONE message).
*
* The message would appear as follows:
* |31 24|23 16|15 8|7 0|
* |-----------------+-----------------+-----------------+-----------------|
* | reserved | operation | pdev_id | msg_type |
* |-----------------------------------------------------------------------|
* | tx_super_rule_param[0] |
* |-----------------------------------------------------------------------|
* | tx_super_rule_param[1] |
* |-----------------------------------------------------------------------|
* | tx_super_rule_param[2] |
* |-----------------------------------------------------------------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to
* 0x26 (HTT_H2T_MSG_TYPE_TX_LCE_SUPER_RULE_SETUP)
* b'8:15 - pdev_id: Identify which pdev TX_SUPER_RULE is for
* b'16:23 - operation: Identify operation to be taken,
* 0: HTT_TX_LCE_SUPER_RULE_INSTALL
* 1: HTT_TX_LCE_SUPER_RULE_RELEASE
* b'24:31 - reserved
* dword1~10 - tx_super_rule_param[0]:
* contains parameters used to setup TX_SUPER_RULE_0
* dword11~20 - tx_super_rule_param[1]:
* contains parameters used to setup TX_SUPER_RULE_1
* dword21~30 - tx_super_rule_param[2]:
* contains parameters used to setup TX_SUPER_RULE_2
*
* Each tx_super_rule_param structure would appear as follows:
* |31 24|23 16|15 8|7 0|
* |-----------------+-----------------+-----------------+-----------------|
* |src_ipv6_addr[3] |src_ipv6_addr[2] |src_ipv6_addr[1] |src_ipv6_addr[0] |
* |/src_ipv4_addr[3]|/src_ipv4_addr[2]|/src_ipv4_addr[1]|/src_ipv4_addr[0]|
* |-----------------------------------------------------------------------|
* |src_ipv6_addr[7] |src_ipv6_addr[6] |src_ipv6_addr[5] |src_ipv6_addr[4] |
* |-----------------------------------------------------------------------|
* |src_ipv6_addr[11]|src_ipv6_addr[10]|src_ipv6_addr[9] |src_ipv6_addr[8] |
* |-----------------------------------------------------------------------|
* |src_ipv6_addr[15]|src_ipv6_addr[14]|src_ipv6_addr[13]|src_ipv6_addr[12]|
* |-----------------------------------------------------------------------|
* |dst_ipv6_addr[3] |dst_ipv6_addr[2] |dst_ipv6_addr[1] |dst_ipv6_addr[0] |
* |/dst_ipv4_addr[3]|/dst_ipv4_addr[2]|/dst_ipv4_addr[1]|/dst_ipv4_addr[0]|
* |-----------------------------------------------------------------------|
* |dst_ipv6_addr[7] |dst_ipv6_addr[6] |dst_ipv6_addr[5] |dst_ipv6_addr[4] |
* |-----------------------------------------------------------------------|
* |dst_ipv6_addr[11]|dst_ipv6_addr[10]|dst_ipv6_addr[9] |dst_ipv6_addr[8] |
* |-----------------------------------------------------------------------|
* |dst_ipv6_addr[15]|dst_ipv6_addr[14]|dst_ipv6_addr[13]|dst_ipv6_addr[12]|
* |-----------------------------------------------------------------------|
* | is_valid | l4_type | l3_type |
* |-----------------------------------------------------------------------|
* | l4_dst_port | l4_src_port |
* |-----------------------------------------------------------------------|
* Where l3_type is 802.3 EtherType, l4_type is IANA IP protocol type.
*
* The tx_super_rule_param[1] structure is similar.
* The tx_super_rule_param[2] structure is similar.
*/
#define HTT_TX_LCE_SUPER_RULE_SETUP_NUM 3
enum htt_tx_lce_super_rule_setup_operation {
HTT_TX_LCE_SUPER_RULE_INSTALL = 0,
HTT_TX_LCE_SUPER_RULE_RELEASE,
/* All operation should be before this */
HTT_TX_LCE_SUPER_RULE_SETUP_INVALID_OPERATION,
};
typedef struct {
union {
A_UINT8 src_ipv4_addr[4];
A_UINT8 src_ipv6_addr[16];
};
union {
A_UINT8 dst_ipv4_addr[4];
A_UINT8 dst_ipv6_addr[16];
};
A_UINT32 l3_type: 16,
l4_type: 8,
is_valid: 8;
A_UINT32 l4_src_port: 16,
l4_dst_port: 16;
} htt_tx_lce_super_rule_param_t;
PREPACK struct htt_tx_lce_super_rule_setup_t {
A_UINT32 msg_type: 8,
pdev_id: 8,
operation: 8, /* htt_tx_lce_super_rule_setup_operation */
reserved: 8;
htt_tx_lce_super_rule_param_t
lce_super_rule_param[HTT_TX_LCE_SUPER_RULE_SETUP_NUM];
} POSTPACK;
#define HTT_TX_LCE_SUPER_RULE_SETUP_SZ (sizeof(struct htt_tx_lce_super_rule_setup_t))
#define HTT_TX_LCE_SUPER_RULE_SETUP_PDEV_ID_M 0x0000ff00
#define HTT_TX_LCE_SUPER_RULE_SETUP_PDEV_ID_S 8
#define HTT_TX_LCE_SUPER_RULE_SETUP_PDEV_ID_GET(_var) \
(((_var) & HTT_TX_LCE_SUPER_RULE_SETUP_PDEV_ID_M) >> \
HTT_TX_LCE_SUPER_RULE_SETUP_PDEV_ID_S)
#define HTT_TX_LCE_SUPER_RULE_SETUP_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_LCE_SUPER_RULE_SETUP_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_TX_LCE_SUPER_RULE_SETUP_PDEV_ID_S)); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_OPERATION_M 0x00ff0000
#define HTT_TX_LCE_SUPER_RULE_SETUP_OPERATION_S 16
#define HTT_TX_LCE_SUPER_RULE_SETUP_OPERATION_GET(_var) \
(((_var) & HTT_TX_LCE_SUPER_RULE_SETUP_OPERATION_M) >> \
HTT_TX_LCE_SUPER_RULE_SETUP_OPERATION_S)
#define HTT_TX_LCE_SUPER_RULE_SETUP_OPERATION_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_LCE_SUPER_RULE_SETUP_OPERATION, _val); \
((_var) |= ((_val) << HTT_TX_LCE_SUPER_RULE_SETUP_OPERATION_S)); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_L3_TYPE_M 0x0000ffff
#define HTT_TX_LCE_SUPER_RULE_SETUP_L3_TYPE_S 0
#define HTT_TX_LCE_SUPER_RULE_SETUP_L3_TYPE_GET(_var) \
(((_var) & HTT_TX_LCE_SUPER_RULE_SETUP_L3_TYPE_M) >> \
HTT_TX_LCE_SUPER_RULE_SETUP_L3_TYPE_S)
#define HTT_TX_LCE_SUPER_RULE_SETUP_L3_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_LCE_SUPER_RULE_SETUP_L3_TYPE, _val); \
((_var) |= ((_val) << HTT_TX_LCE_SUPER_RULE_SETUP_L3_TYPE_S)); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_L4_TYPE_M 0x00ff0000
#define HTT_TX_LCE_SUPER_RULE_SETUP_L4_TYPE_S 16
#define HTT_TX_LCE_SUPER_RULE_SETUP_L4_TYPE_GET(_var) \
(((_var) & HTT_TX_LCE_SUPER_RULE_SETUP_L4_TYPE_M) >> \
HTT_TX_LCE_SUPER_RULE_SETUP_L4_TYPE_S)
#define HTT_TX_LCE_SUPER_RULE_SETUP_L4_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_LCE_SUPER_RULE_SETUP_L4_TYPE, _val); \
((_var) |= ((_val) << HTT_TX_LCE_SUPER_RULE_SETUP_L4_TYPE_S)); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_IS_VALID_M 0xff000000
#define HTT_TX_LCE_SUPER_RULE_SETUP_IS_VALID_S 24
#define HTT_TX_LCE_SUPER_RULE_SETUP_IS_VALID_GET(_var) \
(((_var) & HTT_TX_LCE_SUPER_RULE_SETUP_IS_VALID_M) >> \
HTT_TX_LCE_SUPER_RULE_SETUP_IS_VALID_S)
#define HTT_TX_LCE_SUPER_RULE_SETUP_IS_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_LCE_SUPER_RULE_SETUP_IS_VALID, _val); \
((_var) |= ((_val) << HTT_TX_LCE_SUPER_RULE_SETUP_IS_VALID_S)); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_L4_SRC_PORT_M 0x0000ffff
#define HTT_TX_LCE_SUPER_RULE_SETUP_L4_SRC_PORT_S 0
#define HTT_TX_LCE_SUPER_RULE_SETUP_L4_SRC_PORT_GET(_var) \
(((_var) & HTT_TX_LCE_SUPER_RULE_SETUP_L4_SRC_PORT_M) >> \
HTT_TX_LCE_SUPER_RULE_SETUP_L4_SRC_PORT_S)
#define HTT_TX_LCE_SUPER_RULE_SETUP_L4_SRC_PORT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_LCE_SUPER_RULE_SETUP_L4_SRC_PORT, _val); \
((_var) |= ((_val) << HTT_TX_LCE_SUPER_RULE_SETUP_L4_SRC_PORT_S)); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_L4_DST_PORT_M 0xffff0000
#define HTT_TX_LCE_SUPER_RULE_SETUP_L4_DST_PORT_S 16
#define HTT_TX_LCE_SUPER_RULE_SETUP_L4_DST_PORT_GET(_var) \
(((_var) & HTT_TX_LCE_SUPER_RULE_SETUP_L4_DST_PORT_M) >> \
HTT_TX_LCE_SUPER_RULE_SETUP_L4_DST_PORT_S)
#define HTT_TX_LCE_SUPER_RULE_SETUP_L4_DST_PORT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_LCE_SUPER_RULE_SETUP_L4_DST_PORT, _val); \
((_var) |= ((_val) << HTT_TX_LCE_SUPER_RULE_SETUP_L4_DST_PORT_S)); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_IPV4_ADDR_ARRAY_GET(_ptr, _array) \
do { \
A_MEMCPY(_array, _ptr, 4); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_IPV4_ADDR_ARRAY_SET(_ptr, _array) \
do { \
A_MEMCPY(_ptr, _array, 4); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_IPV6_ADDR_ARRAY_GET(_ptr, _array) \
do { \
A_MEMCPY(_array, _ptr, 16); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_IPV6_ADDR_ARRAY_SET(_ptr, _array) \
do { \
A_MEMCPY(_ptr, _array, 16); \
} while (0)
/**
* htt_h2t_primary_link_peer_status_type -
* Unique number for each status or reasons
* The status reasons can go up to 255 max
*/
enum htt_h2t_primary_link_peer_status_type {
/* Host Primary Link Peer migration Success */
HTT_H2T_PRIMARY_LINK_PEER_MIGRATION_OK = 0,
/* keep this last */
/* Host Primary Link Peer migration Fail */
HTT_H2T_PRIMARY_LINK_PEER_MIGRATION_FAIL = 254,
HTT_H2T_PRIMARY_LINK_PEER_MIGRATION_NUM_STATUS = 255
};
/**
* @brief host -> Primary peer migration completion message from host
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_PRIMARY_LINK_PEER_MIGRATE_RESP
*
* @details
* HTT_H2T_MSG_TYPE_PRIMARY_PEER_MIGRATE_RESP message is sent by host to
* target Confirming that primary link peer migration has completed,
* in response to a HTT_T2H_MSG_TYPE_PRIMARY_LINK_PEER_MIGRATE_IND
* message from the target.
*
* The message would appear as follows:
*
* |31 25|24|23 16|15 12|11 8|7 0|
* |----------------------------+----------+---------+--------------|
* | vdev ID | pdev ID | chip ID | msg type |
* |----------------------------+----------+---------+--------------|
* | ML peer ID | SW peer ID |
* |------------+--+------------+--------------------+--------------|
* | reserved |SV| src_info | status |
* |------------+--+---------------------------------+--------------|
* Where:
* SV = src_info_valid flag
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to 0x24
* (HTT_H2T_MSG_TYPE_PRIMARY_LINK_PEER_MIGRATE_RESP)
* b'8:11 - chip_id: Indicate which chip has been chosen as primary
* b'12:15 - pdev_id: Indicate which pdev in the chip is chosen
* as primary
* b'16:31 - vdev_id: Indicate which vdev in the pdev is chosen
* as primary
*
* dword1 - b'0:15 - sw_link_peer_id: Indicate the sw_peer_id of the peer
* chosen as primary
* b'16:31 - ml_peer_id: Indicate the ml_peer_id to which the
* primary peer belongs.
* dword2 - b'0:7 - status: Indicates the status of Rx/TCL migration
* b'8:23 - src_info: Indicates New Virtual port number through
* which Rx Pipe connects to the correct PPE.
* b'24 - src_info_valid: Indicates src_info is valid.
*/
typedef struct {
A_UINT32 msg_type: 8, /* bits 7:0 */
chip_id: 4, /* bits 11:8 */
pdev_id: 4, /* bits 15:12 */
vdev_id: 16; /* bits 31:16 */
A_UINT32 sw_link_peer_id: 16, /* bits 15:0 */
ml_peer_id: 16; /* bits 31:16 */
A_UINT32 status: 8, /* bits 7:0 */
src_info: 16, /* bits 23:8 */
src_info_valid: 1, /* bit 24 */
reserved: 7; /* bits 31:25 */
} htt_h2t_primary_link_peer_migrate_resp_t;
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_M 0x00000F00
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_S 8
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_GET(_var) \
(((_var) & HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_M) >> \
HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_S)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID, _val); \
((_var) |= ((_val) << HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_S));\
} while (0)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_M 0x0000F000
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_S 12
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_GET(_var) \
(((_var) & HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_M) >> \
HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_S)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_S));\
} while (0)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_M 0xFFFF0000
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_S 16
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_GET(_var) \
(((_var) & HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_M) >> \
HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_S)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_S));\
} while (0)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_M 0x0000FFFF
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_S 0
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_GET(_var) \
(((_var) & HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_M) >> \
HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_S)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID, _val); \
((_var) |= ((_val) << HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_S));\
} while (0)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_M 0xFFFF0000
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_S 16
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_GET(_var) \
(((_var) & HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_M) >> \
HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_S)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID, _val); \
((_var) |= ((_val) << HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_S));\
} while (0)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_STATUS_M 0x000000FF
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_STATUS_S 0
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_STATUS_GET(_var) \
(((_var) & HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_STATUS_M) >> \
HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_STATUS_S)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_STATUS_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_STATUS, _val); \
((_var) |= ((_val) << HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_STATUS_S));\
} while (0)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_M 0x00FFFF00
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_S 8
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_GET(_var) \
(((_var) & HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_M) >> \
HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_S)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO, _val); \
((_var) |= ((_val) << HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_S));\
} while (0)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_VALID_M 0x01000000
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_VALID_S 24
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_VALID_GET(_var) \
(((_var) & HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_VALID_M) >> \
HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_VALID_S)
#define HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_VALID, _val); \
((_var) |= ((_val) << HTT_H2T_PRIMARY_LINK_PEER_MIGRATE_SRC_INFO_VALID_S));\
} while (0)
/**
* @brief host -> tgt msg to configure params for PPDU tx latency stats report
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_TX_LATENCY_STATS_CFG
*
* @details
* HTT_H2T_MSG_TYPE_TX_LATENCY_STATS_CFG message is sent by the host to
* configure the parameters needed for FW to report PPDU tx latency stats
* for latency prediction in user space.
*
* The message would appear as follows:
* |31 28|27 12|11|10 8|7 0|
* |-----------+-------------------+--+-------+--------------|
* |granularity| periodic interval | E|vdev ID| msg type |
* |-----------+-------------------+--+-------+--------------|
* Where: E = enable
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to 0x25
* (HTT_H2T_MSG_TYPE_TX_LATENCY_STATS_CFG)
* b'8:10 - vdev_id: Indicate which vdev is configuration is for
* b'11 - enable: Indicate this message is to enable/disable
* PPDU latency report from FW
* b'12:27 - periodic_interval: Indicate the report interval in MS
* b'28:31 - granularity: Indicate the granularity of the latency
* stats report, in ms
*/
/* HTT_H2T_MSG_TYPE_TX_LATENCY_STATS_CFG */
PREPACK struct htt_h2t_tx_latency_stats_cfg {
A_UINT32 msg_type :8,
vdev_id :3,
enable :1,
periodic_interval :16,
granularity :4;
} POSTPACK;
#define HTT_H2T_TX_LATENCY_STATS_CFG_VDEV_ID_M 0x00000700
#define HTT_H2T_TX_LATENCY_STATS_CFG_VDEV_ID_S 8
#define HTT_H2T_TX_LATENCY_STATS_CFG_VDEV_ID_GET(_var) \
(((_var) & HTT_H2T_TX_LATENCY_STATS_CFG_VDEV_ID_M) >> \
HTT_H2T_TX_LATENCY_STATS_CFG_VDEV_ID_S)
#define HTT_H2T_TX_LATENCY_STATS_CFG_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_TX_LATENCY_STATS_CFG_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_H2T_TX_LATENCY_STATS_CFG_VDEV_ID_S)); \
} while (0)
#define HTT_H2T_TX_LATENCY_STATS_CFG_ENABLE_M 0x00000800
#define HTT_H2T_TX_LATENCY_STATS_CFG_ENABLE_S 11
#define HTT_H2T_TX_LATENCY_STATS_CFG_ENABLE_GET(_var) \
(((_var) & HTT_H2T_TX_LATENCY_STATS_CFG_ENABLE_M) >> \
HTT_H2T_TX_LATENCY_STATS_CFG_ENABLE_S)
#define HTT_H2T_TX_LATENCY_STATS_CFG_ENABLE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_TX_LATENCY_STATS_CFG_ENABLE, _val); \
((_var) |= ((_val) << HTT_H2T_TX_LATENCY_STATS_CFG_ENABLE_S)); \
} while (0)
#define HTT_H2T_TX_LATENCY_STATS_CFG_PERIODIC_INTERVAL_M 0x0FFFF000
#define HTT_H2T_TX_LATENCY_STATS_CFG_PERIODIC_INTERVAL_S 12
#define HTT_H2T_TX_LATENCY_STATS_CFG_PERIODIC_INTERVAL_GET(_var) \
(((_var) & HTT_H2T_TX_LATENCY_STATS_CFG_PERIODIC_INTERVAL_M) >> \
HTT_H2T_TX_LATENCY_STATS_CFG_PERIODIC_INTERVAL_S)
#define HTT_H2T_TX_LATENCY_STATS_CFG_PERIODIC_INTERVAL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_TX_LATENCY_STATS_CFG_PERIODIC_INTERVAL, _val); \
((_var) |= ((_val) << HTT_H2T_TX_LATENCY_STATS_CFG_PERIODIC_INTERVAL_S)); \
} while (0)
#define HTT_H2T_TX_LATENCY_STATS_CFG_GRANULARITY_M 0xF0000000
#define HTT_H2T_TX_LATENCY_STATS_CFG_GRANULARITY_S 28
#define HTT_H2T_TX_LATENCY_STATS_CFG_GRANULARITY_GET(_var) \
(((_var) & HTT_H2T_TX_LATENCY_STATS_CFG_GRANULARITY_M) >> \
HTT_H2T_TX_LATENCY_STATS_CFG_GRANULARITY_S)
#define HTT_H2T_TX_LATENCY_STATS_CFG_GRANULARITY_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_TX_LATENCY_STATS_CFG_GRANULARITY, _val); \
((_var) |= ((_val) << HTT_H2T_TX_LATENCY_STATS_CFG_GRANULARITY_S)); \
} while (0)
/**
* @brief host -> tgt msg to reconfigure params for a MSDU queue
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_SDWF_MSDUQ_RECFG_REQ
*
* @details
* HTT_H2T_MSG_TYPE_SDWF_MSDUQ_RECFG_REQ message is sent by the host to
* update the configuration of the identified MSDU.
* This message supports the following MSDU queue reconfigurations:
* 1. Deactivating or reactivating the MSDU queue.
* 2. Moving the MSDU queue from its current service class to a
* different service class.
* The new service class needs to be within the same TID as the
* current service class.
* This msg overlaps with the HTT_H2T_SAWF_DEF_QUEUES_[MAP,UNMAP]_REQ
* messages, but those only apply to the default MSDU queues within
* a peer-TID, while this message applies only to a single MSDU queue,
* and that MSDU queue can be a user-defined queue or a default queue.
* Also, the concurrent combination of reconfigurations 1+2 is supported.
*
* The message format is as follows:
* |31 24|23 9|8|7 0|
* |--------------------------------------------------------------|
* | tgt_opaque_msduq_id | msg type |
* |--------------------------------------------------------------|
* | request_cookie | reserved |D| svc_class_id |
* |--------------------------------------------------------------|
* Where: D = deactivate flag
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to 0x27
* (HTT_H2T_MSG_TYPE_SDWF_MSDUQ_RECFG_REQ)
* b'8:31 - tgt_opaque_msduq_id: tx flow number that uniquely
* identifies the MSDU queue
* dword1 - b'0:7 - svc_class_id: ID of the SAWF service class to which
* the MSDU queue should be associated.
* On reactivate requests, svc_class_id may be set to the
* same service class ID as before the deactivate or it may
* be set to a different service class ID.
* b'8:8 - deactivate: Whether the MSDU queue should be deactivated
* or reactivated (refer to HTT_MSDUQ_DEACTIVATE_E)
* b'9:23 - reserved
* b'31:24 - request_cookie: Identifier for FW to use in the
* completion indication (T2H SDWF_MSDU_CFG_IND) to call
* out this specific request. The host shall avoid using
* a value of 0xFF (COOKIE_INVALID) here, so that a
* 0xFF / COOKIE_INVALID value can be used in any T2H
* SDWF_MSDUQ_CFG_IND messages that the target sends
* autonomously rather than in response to a H2T
* SDWF_MSDUQ_RECFG_REQ.
*/
/* HTT_H2T_MSG_TYPE_SDWF_MSDUQ_RECFG_REQ */
typedef enum {
HTT_MSDUQ_REACTIVATE = 0,
HTT_MSDUQ_DEACTIVATE = 1,
} HTT_MSDUQ_DEACTIVATE_E;
PREPACK struct htt_h2t_sdwf_msduq_recfg_req {
A_UINT32 msg_type :8, /* bits 7:0 */
tgt_opaque_msduq_id :24; /* bits 31:8 */
A_UINT32 svc_class_id :8, /* bits 7:0 */
deactivate :1, /* bits 8:8 */
reserved :15, /* bits 23:9 */
request_cookie :8; /* bits 31:24 */
} POSTPACK;
#define HTT_MSDUQ_CFG_REG_COOKIE_INVALID 0xFF
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQ_TGT_OPAQUE_MSDUQ_ID_M 0xFFFFFF00
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQ_TGT_OPAQUE_MSDUQ_ID_S 8
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQ_TGT_OPAQUE_MSDUQ_ID_GET(_var) \
(((_var) & HTT_H2T_SDWF_MSDUQ_RECFG_REQ_TGT_OPAQUE_MSDUQ_ID_M) >> \
HTT_H2T_SDWF_MSDUQ_RECFG_REQ_TGT_OPAQUE_MSDUQ_ID_S)
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQ_TGT_OPAQUE_MSDUQ_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_SDWF_MSDUQ_RECFG_REQ_TGT_OPAQUE_MSDUQ_ID, _val); \
((_var) |= ((_val) << HTT_H2T_SDWF_MSDUQ_RECFG_REQ_TGT_OPAQUE_MSDUQ_ID_S)); \
} while (0)
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQ_SVC_CLASS_ID_M 0x000000FF
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQ_SVC_CLASS_ID_S 0
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQ_SVC_CLASS_ID_GET(_var) \
(((_var) & HTT_H2T_SDWF_MSDUQ_RECFG_REQ_SVC_CLASS_ID_M) >> \
HTT_H2T_SDWF_MSDUQ_RECFG_REQ_SVC_CLASS_ID_S)
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQ_SVC_CLASS_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_SDWF_MSDUQ_RECFG_REQ_SVC_CLASS_ID, _val); \
((_var) |= ((_val) << HTT_H2T_SDWF_MSDUQ_RECFG_REQ_SVC_CLASS_ID_S)); \
} while (0)
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQ_DEACTIVATE_M 0x00000100
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQ_DEACTIVATE_S 8
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQ_DEACTIVATE_GET(_var) \
(((_var) & HTT_H2T_SDWF_MSDUQ_RECFG_REQ_DEACTIVATE_M) >> \
HTT_H2T_SDWF_MSDUQ_RECFG_REQ_DEACTIVATE_S)
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQ_DEACTIVATE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_SDWF_MSDUQ_RECFG_REQ_DEACTIVATE, _val); \
((_var) |= ((_val) << HTT_H2T_SDWF_MSDUQ_RECFG_REQ_DEACTIVATE_S)); \
} while (0)
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQUEST_COOKIE_M 0xFF000000
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQUEST_COOKIE_S 24
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQUEST_COOKIE_GET(_var) \
(((_var) & HTT_H2T_SDWF_MSDUQ_RECFG_REQUEST_COOKIE_M) >> \
HTT_H2T_SDWF_MSDUQ_RECFG_REQUEST_COOKIE_S)
#define HTT_H2T_SDWF_MSDUQ_RECFG_REQUEST_COOKIE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_SDWF_MSDUQ_RECFG_REQUEST_COOKIE, _val); \
((_var) |= ((_val) << HTT_H2T_SDWF_MSDUQ_RECFG_REQUEST_COOKIE_S)); \
} while (0)
/*=== target -> host messages ===============================================*/
enum htt_t2h_msg_type {
HTT_T2H_MSG_TYPE_VERSION_CONF = 0x0,
HTT_T2H_MSG_TYPE_RX_IND = 0x1,
HTT_T2H_MSG_TYPE_RX_FLUSH = 0x2,
HTT_T2H_MSG_TYPE_PEER_MAP = 0x3,
HTT_T2H_MSG_TYPE_PEER_UNMAP = 0x4,
HTT_T2H_MSG_TYPE_RX_ADDBA = 0x5,
HTT_T2H_MSG_TYPE_RX_DELBA = 0x6,
HTT_T2H_MSG_TYPE_TX_COMPL_IND = 0x7,
HTT_T2H_MSG_TYPE_PKTLOG = 0x8,
HTT_T2H_MSG_TYPE_STATS_CONF = 0x9,
HTT_T2H_MSG_TYPE_RX_FRAG_IND = 0xa,
HTT_T2H_MSG_TYPE_SEC_IND = 0xb,
DEPRECATED_HTT_T2H_MSG_TYPE_RC_UPDATE_IND = 0xc, /* no longer used */
HTT_T2H_MSG_TYPE_TX_INSPECT_IND = 0xd,
HTT_T2H_MSG_TYPE_MGMT_TX_COMPL_IND = 0xe,
/* only used for HL, add HTT MSG for HTT CREDIT update */
HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND = 0xf,
HTT_T2H_MSG_TYPE_RX_PN_IND = 0x10,
HTT_T2H_MSG_TYPE_RX_OFFLOAD_DELIVER_IND = 0x11,
HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND = 0x12,
/* 0x13 is reserved for RX_RING_LOW_IND (RX Full reordering related) */
HTT_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE = 0x14,
HTT_T2H_MSG_TYPE_CHAN_CHANGE = 0x15,
HTT_T2H_MSG_TYPE_RX_OFLD_PKT_ERR = 0x16,
HTT_T2H_MSG_TYPE_RATE_REPORT = 0x17,
HTT_T2H_MSG_TYPE_FLOW_POOL_MAP = 0x18,
HTT_T2H_MSG_TYPE_FLOW_POOL_UNMAP = 0x19,
HTT_T2H_MSG_TYPE_SRING_SETUP_DONE = 0x1a,
HTT_T2H_MSG_TYPE_MAP_FLOW_INFO = 0x1b,
HTT_T2H_MSG_TYPE_EXT_STATS_CONF = 0x1c,
HTT_T2H_MSG_TYPE_PPDU_STATS_IND = 0x1d,
HTT_T2H_MSG_TYPE_PEER_MAP_V2 = 0x1e,
HTT_T2H_MSG_TYPE_PEER_UNMAP_V2 = 0x1f,
HTT_T2H_MSG_TYPE_MONITOR_MAC_HEADER_IND = 0x20,
HTT_T2H_MSG_TYPE_FLOW_POOL_RESIZE = 0x21,
HTT_T2H_MSG_TYPE_CFR_DUMP_COMPL_IND = 0x22,
HTT_T2H_MSG_TYPE_PEER_STATS_IND = 0x23,
HTT_T2H_MSG_TYPE_BKPRESSURE_EVENT_IND = 0x24,
/* TX_OFFLOAD_DELIVER_IND:
* Forward the target's locally-generated packets to the host,
* to provide to the monitor mode interface.
*/
HTT_T2H_MSG_TYPE_TX_OFFLOAD_DELIVER_IND = 0x25,
HTT_T2H_MSG_TYPE_CHAN_CALDATA = 0x26,
HTT_T2H_MSG_TYPE_FSE_CMEM_BASE_SEND = 0x27,
HTT_T2H_MSG_TYPE_MLO_TIMESTAMP_OFFSET_IND = 0x28,
HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP = 0x29,
HTT_T2H_MSG_TYPE_MLO_RX_PEER_UNMAP = 0x2a,
HTT_T2H_MSG_TYPE_PEER_MAP_V3 = 0x2b,
HTT_T2H_MSG_TYPE_VDEVS_TXRX_STATS_PERIODIC_IND = 0x2c,
HTT_T2H_MSG_TYPE_SAWF_DEF_QUEUES_MAP_REPORT_CONF = 0x2d,
HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF = 0x2d, /* alias */
HTT_T2H_MSG_TYPE_SAWF_MSDUQ_INFO_IND = 0x2e,
HTT_T2H_SAWF_MSDUQ_INFO_IND = 0x2e, /* alias */
HTT_T2H_MSG_TYPE_STREAMING_STATS_IND = 0x2f,
HTT_T2H_PPDU_ID_FMT_IND = 0x30,
HTT_T2H_MSG_TYPE_RX_ADDBA_EXTN = 0x31,
HTT_T2H_MSG_TYPE_RX_DELBA_EXTN = 0x32,
HTT_T2H_MSG_TYPE_RX_CCE_SUPER_RULE_SETUP_DONE = 0x33,
HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_IND = 0x34, /* DEPRECATED */
HTT_T2H_MSG_TYPE_RX_DATA_IND = 0x35,
HTT_T2H_MSG_TYPE_SOFT_UMAC_TX_COMPL_IND = 0x36,
HTT_T2H_MSG_TYPE_PRIMARY_LINK_PEER_MIGRATE_IND = 0x37,
HTT_T2H_MSG_TYPE_PEER_AST_OVERRIDE_INDEX_IND = 0x38,
HTT_T2H_MSG_TYPE_PEER_EXTENDED_EVENT = 0x39,
HTT_T2H_MSG_TYPE_TX_LATENCY_STATS_PERIODIC_IND = 0x3a,
HTT_T2H_MSG_TYPE_TX_LCE_SUPER_RULE_SETUP_DONE = 0x3b,
HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND = 0x3c,
HTT_T2H_MSG_TYPE_TEST,
/* keep this last */
HTT_T2H_NUM_MSGS
};
/*
* HTT target to host message type -
* stored in bits 7:0 of the first word of the message
*/
#define HTT_T2H_MSG_TYPE_M 0xff
#define HTT_T2H_MSG_TYPE_S 0
#define HTT_T2H_MSG_TYPE_SET(word, msg_type) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE, msg_type); \
(word) |= ((msg_type) << HTT_T2H_MSG_TYPE_S); \
} while (0)
#define HTT_T2H_MSG_TYPE_GET(word) \
(((word) & HTT_T2H_MSG_TYPE_M) >> HTT_T2H_MSG_TYPE_S)
/**
* @brief target -> host version number confirmation message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_VERSION_CONF
*
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | reserved | major number | minor number | msg type |
* |-------------------------------------------------------------------|
* : option request TLV (optional) |
* :...................................................................:
*
* The VER_CONF message may consist of a single 4-byte word, or may be
* extended with TLVs that specify HTT options selected by the target.
* The following option TLVs may be appended to the VER_CONF message:
* - LL_BUS_ADDR_SIZE
* - HL_SUPPRESS_TX_COMPL_IND
* - MAX_TX_QUEUE_GROUPS
* These TLVs may appear in an arbitrary order. Any number of these TLVs
* may be appended to the VER_CONF message (but only one TLV of each type).
*
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a version number confirmation message
* Value: 0x0 (HTT_T2H_MSG_TYPE_VERSION_CONF)
* - VER_MINOR
* Bits 15:8
* Purpose: Specify the minor number of the HTT message library version
* in use by the target firmware.
* The minor number specifies the specific revision within a range
* of fundamentally compatible HTT message definition revisions.
* Compatible revisions involve adding new messages or perhaps
* adding new fields to existing messages, in a backwards-compatible
* manner.
* Incompatible revisions involve changing the message type values,
* or redefining existing messages.
* Value: minor number
* - VER_MAJOR
* Bits 15:8
* Purpose: Specify the major number of the HTT message library version
* in use by the target firmware.
* The major number specifies the family of minor revisions that are
* fundamentally compatible with each other, but not with prior or
* later families.
* Value: major number
*/
#define HTT_VER_CONF_MINOR_M 0x0000ff00
#define HTT_VER_CONF_MINOR_S 8
#define HTT_VER_CONF_MAJOR_M 0x00ff0000
#define HTT_VER_CONF_MAJOR_S 16
#define HTT_VER_CONF_MINOR_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_VER_CONF_MINOR, value); \
(word) |= (value) << HTT_VER_CONF_MINOR_S; \
} while (0)
#define HTT_VER_CONF_MINOR_GET(word) \
(((word) & HTT_VER_CONF_MINOR_M) >> HTT_VER_CONF_MINOR_S)
#define HTT_VER_CONF_MAJOR_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_VER_CONF_MAJOR, value); \
(word) |= (value) << HTT_VER_CONF_MAJOR_S; \
} while (0)
#define HTT_VER_CONF_MAJOR_GET(word) \
(((word) & HTT_VER_CONF_MAJOR_M) >> HTT_VER_CONF_MAJOR_S)
#define HTT_VER_CONF_BYTES 4
/**
* @brief - target -> host HTT Rx In order indication message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
*
* @details
*
* |31 24|23 |15|14|13|12|11|10|9|8|7|6|5|4 0|
* |----------------+-------------------+---------------------+---------------|
* | peer ID | P| F| O| ext TID | msg type |
* |--------------------------------------------------------------------------|
* | MSDU count | Reserved | vdev id |
* |--------------------------------------------------------------------------|
* | MSDU 0 bus address (bits 31:0) |
#if HTT_PADDR64
* | MSDU 0 bus address (bits 63:32) |
#endif
* |--------------------------------------------------------------------------|
* | MSDU info | MSDU 0 FW Desc | MSDU 0 Length |
* |--------------------------------------------------------------------------|
* | MSDU 1 bus address (bits 31:0) |
#if HTT_PADDR64
* | MSDU 1 bus address (bits 63:32) |
#endif
* |--------------------------------------------------------------------------|
* | MSDU info | MSDU 1 FW Desc | MSDU 1 Length |
* |--------------------------------------------------------------------------|
*/
/** @brief - MSDU info byte for TCP_CHECKSUM_OFFLOAD use
*
* @details
* bits
* | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
* |-----+----+-------+--------+--------+---------+---------+-----------|
* | reserved | is IP | is UDP | is TCP | is IPv6 |IP chksum| TCP/UDP |
* | | frag | | | | fail |chksum fail|
* |-----+----+-------+--------+--------+---------+---------+-----------|
* (see fw_rx_msdu_info def in wal_rx_desc.h)
*/
struct htt_rx_in_ord_paddr_ind_hdr_t
{
A_UINT32 /* word 0 */
msg_type: 8,
ext_tid: 5,
offload: 1,
frag: 1,
pktlog: 1, /* tell host whether to store MSDUs referenced in this message in pktlog */
peer_id: 16;
A_UINT32 /* word 1 */
vap_id: 8,
/* NOTE:
* This reserved_1 field is not truly reserved - certain targets use
* this field internally to store debug information, and do not zero
* out the contents of the field before uploading the message to the
* host. Thus, any host-target communication supported by this field
* is limited to using values that are never used by the debug
* information stored by certain targets in the reserved_1 field.
* In particular, the targets in question don't use the value 0x3
* within bits 7:6 of this field (i.e. bits 15:14 of the A_UINT32),
* so this previously-unused value within these bits is available to
* use as the host / target PKT_CAPTURE_MODE flag.
*/
reserved_1: 8, /* reserved_1a: 6, pkt_capture_mode: 2, */
/* if pkt_capture_mode == 0x3, host should
* send rx frames to monitor mode interface
*/
msdu_cnt: 16;
};
struct htt_rx_in_ord_paddr_ind_msdu32_t
{
A_UINT32 dma_addr;
A_UINT32
length: 16,
fw_desc: 8,
msdu_info:8;
};
struct htt_rx_in_ord_paddr_ind_msdu64_t
{
A_UINT32 dma_addr_lo;
A_UINT32 dma_addr_hi;
A_UINT32
length: 16,
fw_desc: 8,
msdu_info:8;
};
#if HTT_PADDR64
#define htt_rx_in_ord_paddr_ind_msdu_t htt_rx_in_ord_paddr_ind_msdu64_t
#else
#define htt_rx_in_ord_paddr_ind_msdu_t htt_rx_in_ord_paddr_ind_msdu32_t
#endif
#define HTT_RX_IN_ORD_PADDR_IND_HDR_BYTES (sizeof(struct htt_rx_in_ord_paddr_ind_hdr_t))
#define HTT_RX_IN_ORD_PADDR_IND_HDR_DWORDS (HTT_RX_IN_ORD_PADDR_IND_HDR_BYTES >> 2)
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTE_OFFSET HTT_RX_IN_ORD_PADDR_IND_HDR_BYTES
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_DWORD_OFFSET HTT_RX_IN_ORD_PADDR_IND_HDR_DWORDS
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTES_64 (sizeof(struct htt_rx_in_ord_paddr_ind_msdu64_t))
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_DWORDS_64 (HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTES_64 >> 2)
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTES_32 (sizeof(struct htt_rx_in_ord_paddr_ind_msdu32_t))
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_DWORDS_32 (HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTES_32 >> 2)
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTES (sizeof(struct htt_rx_in_ord_paddr_ind_msdu_t))
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_DWORDS (HTT_RX_IN_ORD_PADDR_IND_MSDU_BYTES >> 2)
#define HTT_RX_IN_ORD_PADDR_IND_EXT_TID_M 0x00001f00
#define HTT_RX_IN_ORD_PADDR_IND_EXT_TID_S 8
#define HTT_RX_IN_ORD_PADDR_IND_OFFLOAD_M 0x00002000
#define HTT_RX_IN_ORD_PADDR_IND_OFFLOAD_S 13
#define HTT_RX_IN_ORD_PADDR_IND_FRAG_M 0x00004000
#define HTT_RX_IN_ORD_PADDR_IND_FRAG_S 14
#define HTT_RX_IN_ORD_PADDR_IND_PKTLOG_M 0x00008000
#define HTT_RX_IN_ORD_PADDR_IND_PKTLOG_S 15
#define HTT_RX_IN_ORD_PADDR_IND_PEER_ID_M 0xffff0000
#define HTT_RX_IN_ORD_PADDR_IND_PEER_ID_S 16
#define HTT_RX_IN_ORD_PADDR_IND_VAP_ID_M 0x000000ff
#define HTT_RX_IN_ORD_PADDR_IND_VAP_ID_S 0
#define HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE_M 0x0000c000
#define HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE_S 14
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_M 0xffff0000
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_S 16
/* for systems using 64-bit format for bus addresses */
#define HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_M 0xffffffff
#define HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_S 0
#define HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_M 0xffffffff
#define HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_S 0
/* for systems using 32-bit format for bus addresses */
#define HTT_RX_IN_ORD_PADDR_IND_PADDR_M 0xffffffff
#define HTT_RX_IN_ORD_PADDR_IND_PADDR_S 0
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_M 0x0000ffff
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_S 0
#define HTT_RX_IN_ORD_PADDR_IND_FW_DESC_M 0x00ff0000
#define HTT_RX_IN_ORD_PADDR_IND_FW_DESC_S 16
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_M 0xff000000
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_S 24
#define HTT_RX_IN_ORD_PADDR_IND_EXT_TID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_EXT_TID, value); \
(word) |= (value) << HTT_RX_IN_ORD_PADDR_IND_EXT_TID_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_EXT_TID_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_EXT_TID_M) >> HTT_RX_IN_ORD_PADDR_IND_EXT_TID_S)
#define HTT_RX_IN_ORD_PADDR_IND_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_PEER_ID, value); \
(word) |= (value) << HTT_RX_IN_ORD_PADDR_IND_PEER_ID_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_PEER_ID_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_PEER_ID_M) >> HTT_RX_IN_ORD_PADDR_IND_PEER_ID_S)
#define HTT_RX_IN_ORD_PADDR_IND_VAP_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_VAP_ID, value); \
(word) |= (value) << HTT_RX_IN_ORD_PADDR_IND_VAP_ID_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_VAP_ID_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_VAP_ID_M) >> HTT_RX_IN_ORD_PADDR_IND_VAP_ID_S)
/*
* If the PKT_CAPTURE_MODE flags value is MONITOR (0x3), the host should
* deliver the rx frames to the monitor mode interface.
* The HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE_MONITOR_SET macro
* sets the PKT_CAPTURE_MODE flags value to MONITOR, and the
* HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE_IS_MONITOR_SET macro
* checks whether the PKT_CAPTURE_MODE flags value is MONITOR.
*/
#define HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE_MONITOR 0x3
#define HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE_MONITOR_SET(word) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE, HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE_MONITOR); \
(word) |= (value) << HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE_IS_MONITOR_SET(word) \
((((word) & HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE_M) >> HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE_S) == \
HTT_RX_IN_ORD_PADDR_IND_PKT_CAPTURE_MODE_MONITOR)
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT, value); \
(word) |= (value) << HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_M) >> HTT_RX_IN_ORD_PADDR_IND_MSDU_CNT_S)
/* for systems using 64-bit format for bus addresses */
#define HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_PADDR_HI, value); \
(word) |= (value) << HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_M) >> HTT_RX_IN_ORD_PADDR_IND_PADDR_HI_S)
#define HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_PADDR_LO, value); \
(word) |= (value) << HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_M) >> HTT_RX_IN_ORD_PADDR_IND_PADDR_LO_S)
/* for systems using 32-bit format for bus addresses */
#define HTT_RX_IN_ORD_PADDR_IND_PADDR_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_PADDR, value); \
(word) |= (value) << HTT_RX_IN_ORD_PADDR_IND_PADDR_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_PADDR_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_PADDR_M) >> HTT_RX_IN_ORD_PADDR_IND_PADDR_S)
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN, value); \
(word) |= (value) << HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_M) >> HTT_RX_IN_ORD_PADDR_IND_MSDU_LEN_S)
#define HTT_RX_IN_ORD_PADDR_IND_FW_DESC_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_FW_DESC, value); \
(word) |= (value) << HTT_RX_IN_ORD_PADDR_IND_FW_DESC_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_FW_DESC_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_FW_DESC_M) >> HTT_RX_IN_ORD_PADDR_IND_FW_DESC_S)
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO, value); \
(word) |= (value) << HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_M) >> HTT_RX_IN_ORD_PADDR_IND_MSDU_INFO_S)
#define HTT_RX_IN_ORD_PADDR_IND_OFFLOAD_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_IND_OFFLOAD, value); \
(word) |= (value) << HTT_RX_IN_ORD_IND_OFFLOAD_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_OFFLOAD_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_OFFLOAD_M) >> HTT_RX_IN_ORD_PADDR_IND_OFFLOAD_S)
#define HTT_RX_IN_ORD_PADDR_IND_FRAG_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_IND_FRAG, value); \
(word) |= (value) << HTT_RX_IN_ORD_IND_FRAG_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_FRAG_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_FRAG_M) >> HTT_RX_IN_ORD_PADDR_IND_FRAG_S)
#define HTT_RX_IN_ORD_PADDR_IND_PKTLOG_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IN_ORD_PADDR_IND_PKTLOG, value); \
(word) |= (value) << HTT_RX_IN_ORD_PADDR_IND_PKTLOG_S; \
} while (0)
#define HTT_RX_IN_ORD_PADDR_IND_PKTLOG_GET(word) \
(((word) & HTT_RX_IN_ORD_PADDR_IND_PKTLOG_M) >> HTT_RX_IN_ORD_PADDR_IND_PKTLOG_S)
/* definitions used within target -> host rx indication message */
PREPACK struct htt_rx_ind_hdr_prefix_t
{
A_UINT32 /* word 0 */
msg_type: 8,
ext_tid: 5,
release_valid: 1,
flush_valid: 1,
reserved0: 1,
peer_id: 16;
A_UINT32 /* word 1 */
flush_start_seq_num: 6,
flush_end_seq_num: 6,
release_start_seq_num: 6,
release_end_seq_num: 6,
num_mpdu_ranges: 8;
} POSTPACK;
#define HTT_RX_IND_HDR_PREFIX_BYTES (sizeof(struct htt_rx_ind_hdr_prefix_t))
#define HTT_RX_IND_HDR_PREFIX_SIZE32 (HTT_RX_IND_HDR_PREFIX_BYTES >> 2)
#define HTT_TGT_RSSI_INVALID 0x80
PREPACK struct htt_rx_ppdu_desc_t
{
#define HTT_RX_IND_PPDU_OFFSET_WORD_RSSI_CMB 0
#define HTT_RX_IND_PPDU_OFFSET_WORD_TIMESTAMP_SUBMICROSEC 0
#define HTT_RX_IND_PPDU_OFFSET_WORD_PHY_ERR_CODE 0
#define HTT_RX_IND_PPDU_OFFSET_WORD_PHY_ERR 0
#define HTT_RX_IND_PPDU_OFFSET_WORD_LEGACY_RATE 0
#define HTT_RX_IND_PPDU_OFFSET_WORD_LEGACY_RATE_SEL 0
#define HTT_RX_IND_PPDU_OFFSET_WORD_END_VALID 0
#define HTT_RX_IND_PPDU_OFFSET_WORD_START_VALID 0
A_UINT32 /* word 0 */
rssi_cmb: 8,
timestamp_submicrosec: 8,
phy_err_code: 8,
phy_err: 1,
legacy_rate: 4,
legacy_rate_sel: 1,
end_valid: 1,
start_valid: 1;
#define HTT_RX_IND_PPDU_OFFSET_WORD_RSSI0 1
union {
A_UINT32 /* word 1 */
rssi0_pri20: 8,
rssi0_ext20: 8,
rssi0_ext40: 8,
rssi0_ext80: 8;
A_UINT32 rssi0; /* access all 20/40/80 per-bandwidth RSSIs together */
} u0;
#define HTT_RX_IND_PPDU_OFFSET_WORD_RSSI1 2
union {
A_UINT32 /* word 2 */
rssi1_pri20: 8,
rssi1_ext20: 8,
rssi1_ext40: 8,
rssi1_ext80: 8;
A_UINT32 rssi1; /* access all 20/40/80 per-bandwidth RSSIs together */
} u1;
#define HTT_RX_IND_PPDU_OFFSET_WORD_RSSI2 3
union {
A_UINT32 /* word 3 */
rssi2_pri20: 8,
rssi2_ext20: 8,
rssi2_ext40: 8,
rssi2_ext80: 8;
A_UINT32 rssi2; /* access all 20/40/80 per-bandwidth RSSIs together */
} u2;
#define HTT_RX_IND_PPDU_OFFSET_WORD_RSSI3 4
union {
A_UINT32 /* word 4 */
rssi3_pri20: 8,
rssi3_ext20: 8,
rssi3_ext40: 8,
rssi3_ext80: 8;
A_UINT32 rssi3; /* access all 20/40/80 per-bandwidth RSSIs together */
} u3;
#define HTT_RX_IND_PPDU_OFFSET_WORD_TSF32 5
A_UINT32 tsf32; /* word 5 */
#define HTT_RX_IND_PPDU_OFFSET_WORD_TIMESTAMP_MICROSEC 6
A_UINT32 timestamp_microsec; /* word 6 */
#define HTT_RX_IND_PPDU_OFFSET_WORD_PREAMBLE_TYPE 7
#define HTT_RX_IND_PPDU_OFFSET_WORD_VHT_SIG_A1 7
A_UINT32 /* word 7 */
vht_sig_a1: 24,
preamble_type: 8;
#define HTT_RX_IND_PPDU_OFFSET_WORD_VHT_SIG_A2 8
#define HTT_RX_IND_PPDU_OFFSET_WORD_SA_ANT_MATRIX 8
A_UINT32 /* word 8 */
vht_sig_a2: 24,
/* sa_ant_matrix
* For cases where a single rx chain has options to be connected to
* different rx antennas, show which rx antennas were in use during
* receipt of a given PPDU.
* This sa_ant_matrix provides a bitmask of the antennas used while
* receiving this frame.
*/
sa_ant_matrix: 8;
} POSTPACK;
#define HTT_RX_PPDU_DESC_BYTES (sizeof(struct htt_rx_ppdu_desc_t))
#define HTT_RX_PPDU_DESC_SIZE32 (HTT_RX_PPDU_DESC_BYTES >> 2)
PREPACK struct htt_rx_ind_hdr_suffix_t
{
A_UINT32 /* word 0 */
fw_rx_desc_bytes: 16,
reserved0: 16;
} POSTPACK;
#define HTT_RX_IND_HDR_SUFFIX_BYTES (sizeof(struct htt_rx_ind_hdr_suffix_t))
#define HTT_RX_IND_HDR_SUFFIX_SIZE32 (HTT_RX_IND_HDR_SUFFIX_BYTES >> 2)
PREPACK struct htt_rx_ind_hdr_t
{
struct htt_rx_ind_hdr_prefix_t prefix;
struct htt_rx_ppdu_desc_t rx_ppdu_desc;
struct htt_rx_ind_hdr_suffix_t suffix;
} POSTPACK;
#define HTT_RX_IND_HDR_BYTES (sizeof(struct htt_rx_ind_hdr_t))
#define HTT_RX_IND_HDR_SIZE32 (HTT_RX_IND_HDR_BYTES >> 2)
/* confirm that HTT_RX_IND_HDR_BYTES is a multiple of 4 */
A_COMPILE_TIME_ASSERT(HTT_RX_IND_hdr_size_quantum,
(HTT_RX_IND_HDR_BYTES & 0x3) == 0);
/*
* HTT_RX_IND_FW_RX_PPDU_DESC_BYTE_OFFSET:
* the offset into the HTT rx indication message at which the
* FW rx PPDU descriptor resides
*/
#define HTT_RX_IND_FW_RX_PPDU_DESC_BYTE_OFFSET HTT_RX_IND_HDR_PREFIX_BYTES
/*
* HTT_RX_IND_HDR_SUFFIX_BYTE_OFFSET:
* the offset into the HTT rx indication message at which the
* header suffix (FW rx MSDU byte count) resides
*/
#define HTT_RX_IND_HDR_SUFFIX_BYTE_OFFSET \
(HTT_RX_IND_FW_RX_PPDU_DESC_BYTE_OFFSET + HTT_RX_PPDU_DESC_BYTES)
/*
* HTT_RX_IND_FW_RX_DESC_BYTE_OFFSET:
* the offset into the HTT rx indication message at which the per-MSDU
* information starts
* Bytes 0-7 are the message header; bytes 8-11 contain the length of the
* per-MSDU information portion of the message. The per-MSDU info itself
* starts at byte 12.
*/
#define HTT_RX_IND_FW_RX_DESC_BYTE_OFFSET HTT_RX_IND_HDR_BYTES
/**
* @brief target -> host rx indication message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_IND
*
* @details
* The following field definitions describe the format of the rx indication
* message sent from the target to the host.
* The message consists of three major sections:
* 1. a fixed-length header
* 2. a variable-length list of firmware rx MSDU descriptors
* 3. one or more 4-octet MPDU range information elements
* The fixed length header itself has two sub-sections
* 1. the message meta-information, including identification of the
* sender and type of the received data, and a 4-octet flush/release IE
* 2. the firmware rx PPDU descriptor
*
* The format of the message is depicted below.
* in this depiction, the following abbreviations are used for information
* elements within the message:
* - SV - start valid: this flag is set if the FW rx PPDU descriptor
* elements associated with the PPDU start are valid.
* Specifically, the following fields are valid only if SV is set:
* RSSI (all variants), L, legacy rate, preamble type, service,
* VHT-SIG-A
* - EV - end valid: this flag is set if the FW rx PPDU descriptor
* elements associated with the PPDU end are valid.
* Specifically, the following fields are valid only if EV is set:
* P, PHY err code, TSF, microsec / sub-microsec timestamp
* - L - Legacy rate selector - if legacy rates are used, this flag
* indicates whether the rate is from a CCK (L == 1) or OFDM
* (L == 0) PHY.
* - P - PHY error flag - boolean indication of whether the rx frame had
* a PHY error
*
* |31 24|23 18|17|16|15|14|13|12|11|10|9|8|7|6|5|4 0|
* |----------------+-------------------+---------------------+---------------|
* | peer ID | |RV|FV| ext TID | msg type |
* |--------------------------------------------------------------------------|
* | num | release | release | flush | flush |
* | MPDU | end | start | end | start |
* | ranges | seq num | seq num | seq num | seq num |
* |==========================================================================|
* |S|E|L| legacy |P| PHY err code | sub-microsec | combined |
* |V|V| | rate | | | timestamp | RSSI |
* |--------------------------------------------------------------------------|
* | RSSI rx0 ext80 | RSSI rx0 ext40 | RSSI rx0 ext20 | RSSI rx0 pri20|
* |--------------------------------------------------------------------------|
* | RSSI rx1 ext80 | RSSI rx1 ext40 | RSSI rx1 ext20 | RSSI rx1 pri20|
* |--------------------------------------------------------------------------|
* | RSSI rx2 ext80 | RSSI rx2 ext40 | RSSI rx2 ext20 | RSSI rx2 pri20|
* |--------------------------------------------------------------------------|
* | RSSI rx3 ext80 | RSSI rx3 ext40 | RSSI rx3 ext20 | RSSI rx3 pri20|
* |--------------------------------------------------------------------------|
* | TSF LSBs |
* |--------------------------------------------------------------------------|
* | microsec timestamp |
* |--------------------------------------------------------------------------|
* | preamble type | HT-SIG / VHT-SIG-A1 |
* |--------------------------------------------------------------------------|
* | service | HT-SIG / VHT-SIG-A2 |
* |==========================================================================|
* | reserved | FW rx desc bytes |
* |--------------------------------------------------------------------------|
* | MSDU Rx | MSDU Rx | MSDU Rx | MSDU Rx |
* | desc B3 | desc B2 | desc B1 | desc B0 |
* |--------------------------------------------------------------------------|
* : : :
* |--------------------------------------------------------------------------|
* | alignment | MSDU Rx |
* | padding | desc Bn |
* |--------------------------------------------------------------------------|
* | reserved | MPDU range status | MPDU count |
* |--------------------------------------------------------------------------|
* : reserved : MPDU range status : MPDU count :
* :- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - :
*
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an rx indication message
* Value: 0x1 (HTT_T2H_MSG_TYPE_RX_IND)
* - EXT_TID
* Bits 12:8
* Purpose: identify the traffic ID of the rx data, including
* special "extended" TID values for multicast, broadcast, and
* non-QoS data frames
* Value: 0-15 for regular TIDs, or >= 16 for bcast/mcast/non-QoS
* - FLUSH_VALID (FV)
* Bit 13
* Purpose: indicate whether the flush IE (start/end sequence numbers)
* is valid
* Value:
* 1 -> flush IE is valid and needs to be processed
* 0 -> flush IE is not valid and should be ignored
* - REL_VALID (RV)
* Bit 13
* Purpose: indicate whether the release IE (start/end sequence numbers)
* is valid
* Value:
* 1 -> release IE is valid and needs to be processed
* 0 -> release IE is not valid and should be ignored
* - PEER_ID
* Bits 31:16
* Purpose: Identify, by ID, which peer sent the rx data
* Value: ID of the peer who sent the rx data
* - FLUSH_SEQ_NUM_START
* Bits 5:0
* Purpose: Indicate the start of a series of MPDUs to flush
* Not all MPDUs within this series are necessarily valid - the host
* must check each sequence number within this range to see if the
* corresponding MPDU is actually present.
* This field is only valid if the FV bit is set.
* Value:
* The sequence number for the first MPDUs to check to flush.
* The sequence number is masked by 0x3f.
* - FLUSH_SEQ_NUM_END
* Bits 11:6
* Purpose: Indicate the end of a series of MPDUs to flush
* Value:
* The sequence number one larger than the sequence number of the
* last MPDU to check to flush.
* The sequence number is masked by 0x3f.
* Not all MPDUs within this series are necessarily valid - the host
* must check each sequence number within this range to see if the
* corresponding MPDU is actually present.
* This field is only valid if the FV bit is set.
* - REL_SEQ_NUM_START
* Bits 17:12
* Purpose: Indicate the start of a series of MPDUs to release.
* All MPDUs within this series are present and valid - the host
* need not check each sequence number within this range to see if
* the corresponding MPDU is actually present.
* This field is only valid if the RV bit is set.
* Value:
* The sequence number for the first MPDUs to check to release.
* The sequence number is masked by 0x3f.
* - REL_SEQ_NUM_END
* Bits 23:18
* Purpose: Indicate the end of a series of MPDUs to release.
* Value:
* The sequence number one larger than the sequence number of the
* last MPDU to check to release.
* The sequence number is masked by 0x3f.
* All MPDUs within this series are present and valid - the host
* need not check each sequence number within this range to see if
* the corresponding MPDU is actually present.
* This field is only valid if the RV bit is set.
* - NUM_MPDU_RANGES
* Bits 31:24
* Purpose: Indicate how many ranges of MPDUs are present.
* Each MPDU range consists of a series of contiguous MPDUs within the
* rx frame sequence which all have the same MPDU status.
* Value: 1-63 (typically a small number, like 1-3)
*
* Rx PPDU descriptor fields:
* - RSSI_CMB
* Bits 7:0
* Purpose: Combined RSSI from all active rx chains, across the active
* bandwidth.
* Value: RSSI dB units w.r.t. noise floor
* - TIMESTAMP_SUBMICROSEC
* Bits 15:8
* Purpose: high-resolution timestamp
* Value:
* Sub-microsecond time of PPDU reception.
* This timestamp ranges from [0,MAC clock MHz).
* This timestamp can be used in conjunction with TIMESTAMP_MICROSEC
* to form a high-resolution, large range rx timestamp.
* - PHY_ERR_CODE
* Bits 23:16
* Purpose:
* If the rx frame processing resulted in a PHY error, indicate what
* type of rx PHY error occurred.
* Value:
* This field is valid if the "P" (PHY_ERR) flag is set.
* TBD: document/specify the values for this field
* - PHY_ERR
* Bit 24
* Purpose: indicate whether the rx PPDU had a PHY error
* Value: 0 -> no rx PHY error, 1 -> rx PHY error encountered
* - LEGACY_RATE
* Bits 28:25
* Purpose:
* If the rx frame used a legacy rate rather than a HT or VHT rate,
* specify which rate was used.
* Value:
* The LEGACY_RATE field's value depends on the "L" (LEGACY_RATE_SEL)
* flag.
* If LEGACY_RATE_SEL is 0:
* 0x8: OFDM 48 Mbps
* 0x9: OFDM 24 Mbps
* 0xA: OFDM 12 Mbps
* 0xB: OFDM 6 Mbps
* 0xC: OFDM 54 Mbps
* 0xD: OFDM 36 Mbps
* 0xE: OFDM 18 Mbps
* 0xF: OFDM 9 Mbps
* If LEGACY_RATE_SEL is 1:
* 0x8: CCK 11 Mbps long preamble
* 0x9: CCK 5.5 Mbps long preamble
* 0xA: CCK 2 Mbps long preamble
* 0xB: CCK 1 Mbps long preamble
* 0xC: CCK 11 Mbps short preamble
* 0xD: CCK 5.5 Mbps short preamble
* 0xE: CCK 2 Mbps short preamble
* - LEGACY_RATE_SEL
* Bit 29
* Purpose: if rx used a legacy rate, specify whether it was OFDM or CCK
* Value:
* This field is valid if the PREAMBLE_TYPE field indicates the rx
* used a legacy rate.
* 0 -> OFDM, 1 -> CCK
* - END_VALID
* Bit 30
* Purpose: Indicate whether the FW rx PPDU desc fields associated with
* the start of the PPDU are valid. Specifically, the following
* fields are only valid if END_VALID is set:
* PHY_ERR, PHY_ERR_CODE, TSF32, TIMESTAMP_MICROSEC,
* TIMESTAMP_SUBMICROSEC
* Value:
* 0 -> rx PPDU desc end fields are not valid
* 1 -> rx PPDU desc end fields are valid
* - START_VALID
* Bit 31
* Purpose: Indicate whether the FW rx PPDU desc fields associated with
* the end of the PPDU are valid. Specifically, the following
* fields are only valid if START_VALID is set:
* RSSI, LEGACY_RATE_SEL, LEGACY_RATE, PREAMBLE_TYPE, SERVICE,
* VHT-SIG-A
* Value:
* 0 -> rx PPDU desc start fields are not valid
* 1 -> rx PPDU desc start fields are valid
* - RSSI0_PRI20
* Bits 7:0
* Purpose: RSSI from chain 0 on the primary 20 MHz channel
* Value: RSSI dB units w.r.t. noise floor
*
* - RSSI0_EXT20
* Bits 7:0
* Purpose: RSSI from chain 0 on the bonded extension 20 MHz channel
* (if the rx bandwidth was >= 40 MHz)
* Value: RSSI dB units w.r.t. noise floor
* - RSSI0_EXT40
* Bits 7:0
* Purpose: RSSI from chain 0 on the bonded extension 40 MHz channel
* (if the rx bandwidth was >= 80 MHz)
* Value: RSSI dB units w.r.t. noise floor
* - RSSI0_EXT80
* Bits 7:0
* Purpose: RSSI from chain 0 on the bonded extension 80 MHz channel
* (if the rx bandwidth was >= 160 MHz)
* Value: RSSI dB units w.r.t. noise floor
*
* - RSSI1_PRI20
* Bits 7:0
* Purpose: RSSI from chain 1 on the primary 20 MHz channel
* Value: RSSI dB units w.r.t. noise floor
* - RSSI1_EXT20
* Bits 7:0
* Purpose: RSSI from chain 1 on the bonded extension 20 MHz channel
* (if the rx bandwidth was >= 40 MHz)
* Value: RSSI dB units w.r.t. noise floor
* - RSSI1_EXT40
* Bits 7:0
* Purpose: RSSI from chain 1 on the bonded extension 40 MHz channel
* (if the rx bandwidth was >= 80 MHz)
* Value: RSSI dB units w.r.t. noise floor
* - RSSI1_EXT80
* Bits 7:0
* Purpose: RSSI from chain 1 on the bonded extension 80 MHz channel
* (if the rx bandwidth was >= 160 MHz)
* Value: RSSI dB units w.r.t. noise floor
*
* - RSSI2_PRI20
* Bits 7:0
* Purpose: RSSI from chain 2 on the primary 20 MHz channel
* Value: RSSI dB units w.r.t. noise floor
* - RSSI2_EXT20
* Bits 7:0
* Purpose: RSSI from chain 2 on the bonded extension 20 MHz channel
* (if the rx bandwidth was >= 40 MHz)
* Value: RSSI dB units w.r.t. noise floor
* - RSSI2_EXT40
* Bits 7:0
* Purpose: RSSI from chain 2 on the bonded extension 40 MHz channel
* (if the rx bandwidth was >= 80 MHz)
* Value: RSSI dB units w.r.t. noise floor
* - RSSI2_EXT80
* Bits 7:0
* Purpose: RSSI from chain 2 on the bonded extension 80 MHz channel
* (if the rx bandwidth was >= 160 MHz)
* Value: RSSI dB units w.r.t. noise floor
*
* - RSSI3_PRI20
* Bits 7:0
* Purpose: RSSI from chain 3 on the primary 20 MHz channel
* Value: RSSI dB units w.r.t. noise floor
* - RSSI3_EXT20
* Bits 7:0
* Purpose: RSSI from chain 3 on the bonded extension 20 MHz channel
* (if the rx bandwidth was >= 40 MHz)
* Value: RSSI dB units w.r.t. noise floor
* - RSSI3_EXT40
* Bits 7:0
* Purpose: RSSI from chain 3 on the bonded extension 40 MHz channel
* (if the rx bandwidth was >= 80 MHz)
* Value: RSSI dB units w.r.t. noise floor
* - RSSI3_EXT80
* Bits 7:0
* Purpose: RSSI from chain 3 on the bonded extension 80 MHz channel
* (if the rx bandwidth was >= 160 MHz)
* Value: RSSI dB units w.r.t. noise floor
*
* - TSF32
* Bits 31:0
* Purpose: specify the time the rx PPDU was received, in TSF units
* Value: 32 LSBs of the TSF
* - TIMESTAMP_MICROSEC
* Bits 31:0
* Purpose: specify the time the rx PPDU was received, in microsecond units
* Value: PPDU rx time, in microseconds
* - VHT_SIG_A1
* Bits 23:0
* Purpose: Provide the HT-SIG (initial 24 bits) or VHT-SIG-A1 field
* from the rx PPDU
* Value:
* If PREAMBLE_TYPE specifies VHT, then this field contains the
* VHT-SIG-A1 data.
* If PREAMBLE_TYPE specifies HT, then this field contains the
* first 24 bits of the HT-SIG data.
* Otherwise, this field is invalid.
* Refer to the the 802.11 protocol for the definition of the
* HT-SIG and VHT-SIG-A1 fields
* - VHT_SIG_A2
* Bits 23:0
* Purpose: Provide the HT-SIG (final 24 bits) or VHT-SIG-A2 field
* from the rx PPDU
* Value:
* If PREAMBLE_TYPE specifies VHT, then this field contains the
* VHT-SIG-A2 data.
* If PREAMBLE_TYPE specifies HT, then this field contains the
* last 24 bits of the HT-SIG data.
* Otherwise, this field is invalid.
* Refer to the the 802.11 protocol for the definition of the
* HT-SIG and VHT-SIG-A2 fields
* - PREAMBLE_TYPE
* Bits 31:24
* Purpose: indicate the PHY format of the received burst
* Value:
* 0x4: Legacy (OFDM/CCK)
* 0x8: HT
* 0x9: HT with TxBF
* 0xC: VHT
* 0xD: VHT with TxBF
* - SERVICE
* Bits 31:24
* Purpose: TBD
* Value: TBD
*
* Rx MSDU descriptor fields:
* - FW_RX_DESC_BYTES
* Bits 15:0
* Purpose: Indicate how many bytes in the Rx indication are used for
* FW Rx descriptors
*
* Payload fields:
* - MPDU_COUNT
* Bits 7:0
* Purpose: Indicate how many sequential MPDUs share the same status.
* All MPDUs within the indicated list are from the same RA-TA-TID.
* - MPDU_STATUS
* Bits 15:8
* Purpose: Indicate whether the (group of sequential) MPDU(s) were
* received successfully.
* Value:
* 0x1: success
* 0x2: FCS error
* 0x3: duplicate error
* 0x4: replay error
* 0x5: invalid peer
*/
/* header fields */
#define HTT_RX_IND_EXT_TID_M 0x1f00
#define HTT_RX_IND_EXT_TID_S 8
#define HTT_RX_IND_FLUSH_VALID_M 0x2000
#define HTT_RX_IND_FLUSH_VALID_S 13
#define HTT_RX_IND_REL_VALID_M 0x4000
#define HTT_RX_IND_REL_VALID_S 14
#define HTT_RX_IND_PEER_ID_M 0xffff0000
#define HTT_RX_IND_PEER_ID_S 16
#define HTT_RX_IND_FLUSH_SEQ_NUM_START_M 0x3f
#define HTT_RX_IND_FLUSH_SEQ_NUM_START_S 0
#define HTT_RX_IND_FLUSH_SEQ_NUM_END_M 0xfc0
#define HTT_RX_IND_FLUSH_SEQ_NUM_END_S 6
#define HTT_RX_IND_REL_SEQ_NUM_START_M 0x3f000
#define HTT_RX_IND_REL_SEQ_NUM_START_S 12
#define HTT_RX_IND_REL_SEQ_NUM_END_M 0xfc0000
#define HTT_RX_IND_REL_SEQ_NUM_END_S 18
#define HTT_RX_IND_NUM_MPDU_RANGES_M 0xff000000
#define HTT_RX_IND_NUM_MPDU_RANGES_S 24
/* rx PPDU descriptor fields */
#define HTT_RX_IND_RSSI_CMB_M 0x000000ff
#define HTT_RX_IND_RSSI_CMB_S 0
#define HTT_RX_IND_TIMESTAMP_SUBMICROSEC_M 0x0000ff00
#define HTT_RX_IND_TIMESTAMP_SUBMICROSEC_S 8
#define HTT_RX_IND_PHY_ERR_CODE_M 0x00ff0000
#define HTT_RX_IND_PHY_ERR_CODE_S 16
#define HTT_RX_IND_PHY_ERR_M 0x01000000
#define HTT_RX_IND_PHY_ERR_S 24
#define HTT_RX_IND_LEGACY_RATE_M 0x1e000000
#define HTT_RX_IND_LEGACY_RATE_S 25
#define HTT_RX_IND_LEGACY_RATE_SEL_M 0x20000000
#define HTT_RX_IND_LEGACY_RATE_SEL_S 29
#define HTT_RX_IND_END_VALID_M 0x40000000
#define HTT_RX_IND_END_VALID_S 30
#define HTT_RX_IND_START_VALID_M 0x80000000
#define HTT_RX_IND_START_VALID_S 31
#define HTT_RX_IND_RSSI_PRI20_M 0x000000ff
#define HTT_RX_IND_RSSI_PRI20_S 0
#define HTT_RX_IND_RSSI_EXT20_M 0x0000ff00
#define HTT_RX_IND_RSSI_EXT20_S 8
#define HTT_RX_IND_RSSI_EXT40_M 0x00ff0000
#define HTT_RX_IND_RSSI_EXT40_S 16
#define HTT_RX_IND_RSSI_EXT80_M 0xff000000
#define HTT_RX_IND_RSSI_EXT80_S 24
#define HTT_RX_IND_VHT_SIG_A1_M 0x00ffffff
#define HTT_RX_IND_VHT_SIG_A1_S 0
#define HTT_RX_IND_VHT_SIG_A2_M 0x00ffffff
#define HTT_RX_IND_VHT_SIG_A2_S 0
#define HTT_RX_IND_PREAMBLE_TYPE_M 0xff000000
#define HTT_RX_IND_PREAMBLE_TYPE_S 24
#define HTT_RX_IND_SERVICE_M 0xff000000
#define HTT_RX_IND_SERVICE_S 24
#define HTT_RX_IND_SA_ANT_MATRIX_M 0xff000000
#define HTT_RX_IND_SA_ANT_MATRIX_S 24
/* rx MSDU descriptor fields */
#define HTT_RX_IND_FW_RX_DESC_BYTES_M 0xffff
#define HTT_RX_IND_FW_RX_DESC_BYTES_S 0
/* payload fields */
#define HTT_RX_IND_MPDU_COUNT_M 0xff
#define HTT_RX_IND_MPDU_COUNT_S 0
#define HTT_RX_IND_MPDU_STATUS_M 0xff00
#define HTT_RX_IND_MPDU_STATUS_S 8
#define HTT_RX_IND_EXT_TID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_EXT_TID, value); \
(word) |= (value) << HTT_RX_IND_EXT_TID_S; \
} while (0)
#define HTT_RX_IND_EXT_TID_GET(word) \
(((word) & HTT_RX_IND_EXT_TID_M) >> HTT_RX_IND_EXT_TID_S)
#define HTT_RX_IND_FLUSH_VALID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_FLUSH_VALID, value); \
(word) |= (value) << HTT_RX_IND_FLUSH_VALID_S; \
} while (0)
#define HTT_RX_IND_FLUSH_VALID_GET(word) \
(((word) & HTT_RX_IND_FLUSH_VALID_M) >> HTT_RX_IND_FLUSH_VALID_S)
#define HTT_RX_IND_REL_VALID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_REL_VALID, value); \
(word) |= (value) << HTT_RX_IND_REL_VALID_S; \
} while (0)
#define HTT_RX_IND_REL_VALID_GET(word) \
(((word) & HTT_RX_IND_REL_VALID_M) >> HTT_RX_IND_REL_VALID_S)
#define HTT_RX_IND_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_PEER_ID, value); \
(word) |= (value) << HTT_RX_IND_PEER_ID_S; \
} while (0)
#define HTT_RX_IND_PEER_ID_GET(word) \
(((word) & HTT_RX_IND_PEER_ID_M) >> HTT_RX_IND_PEER_ID_S)
#define HTT_RX_IND_FW_RX_DESC_BYTES_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_FW_RX_DESC_BYTES, value); \
(word) |= (value) << HTT_RX_IND_FW_RX_DESC_BYTES_S; \
} while (0)
#define HTT_RX_IND_FW_RX_DESC_BYTES_GET(word) \
(((word) & HTT_RX_IND_FW_RX_DESC_BYTES_M) >> HTT_RX_IND_FW_RX_DESC_BYTES_S)
#define HTT_RX_IND_FLUSH_SEQ_NUM_START_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_FLUSH_SEQ_NUM_START, value); \
(word) |= (value) << HTT_RX_IND_FLUSH_SEQ_NUM_START_S; \
} while (0)
#define HTT_RX_IND_FLUSH_SEQ_NUM_START_GET(word) \
(((word) & HTT_RX_IND_FLUSH_SEQ_NUM_START_M) >> \
HTT_RX_IND_FLUSH_SEQ_NUM_START_S)
#define HTT_RX_IND_FLUSH_SEQ_NUM_END_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_FLUSH_SEQ_NUM_END, value); \
(word) |= (value) << HTT_RX_IND_FLUSH_SEQ_NUM_END_S; \
} while (0)
#define HTT_RX_IND_FLUSH_SEQ_NUM_END_GET(word) \
(((word) & HTT_RX_IND_FLUSH_SEQ_NUM_END_M) >> \
HTT_RX_IND_FLUSH_SEQ_NUM_END_S)
#define HTT_RX_IND_REL_SEQ_NUM_START_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_REL_SEQ_NUM_START, value); \
(word) |= (value) << HTT_RX_IND_REL_SEQ_NUM_START_S; \
} while (0)
#define HTT_RX_IND_REL_SEQ_NUM_START_GET(word) \
(((word) & HTT_RX_IND_REL_SEQ_NUM_START_M) >> \
HTT_RX_IND_REL_SEQ_NUM_START_S)
#define HTT_RX_IND_REL_SEQ_NUM_END_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_REL_SEQ_NUM_END, value); \
(word) |= (value) << HTT_RX_IND_REL_SEQ_NUM_END_S; \
} while (0)
#define HTT_RX_IND_REL_SEQ_NUM_END_GET(word) \
(((word) & HTT_RX_IND_REL_SEQ_NUM_END_M) >> \
HTT_RX_IND_REL_SEQ_NUM_END_S)
#define HTT_RX_IND_NUM_MPDU_RANGES_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_NUM_MPDU_RANGES, value); \
(word) |= (value) << HTT_RX_IND_NUM_MPDU_RANGES_S; \
} while (0)
#define HTT_RX_IND_NUM_MPDU_RANGES_GET(word) \
(((word) & HTT_RX_IND_NUM_MPDU_RANGES_M) >> \
HTT_RX_IND_NUM_MPDU_RANGES_S)
/* FW rx PPDU descriptor fields */
#define HTT_RX_IND_RSSI_CMB_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_RSSI_CMB, value); \
(word) |= (value) << HTT_RX_IND_RSSI_CMB_S; \
} while (0)
#define HTT_RX_IND_RSSI_CMB_GET(word) \
(((word) & HTT_RX_IND_RSSI_CMB_M) >> \
HTT_RX_IND_RSSI_CMB_S)
#define HTT_RX_IND_TIMESTAMP_SUBMICROSEC_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_TIMESTAMP_SUBMICROSEC, value); \
(word) |= (value) << HTT_RX_IND_TIMESTAMP_SUBMICROSEC_S; \
} while (0)
#define HTT_RX_IND_TIMESTAMP_SUBMICROSEC_GET(word) \
(((word) & HTT_RX_IND_TIMESTAMP_SUBMICROSEC_M) >> \
HTT_RX_IND_TIMESTAMP_SUBMICROSEC_S)
#define HTT_RX_IND_PHY_ERR_CODE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_PHY_ERR_CODE, value); \
(word) |= (value) << HTT_RX_IND_PHY_ERR_CODE_S; \
} while (0)
#define HTT_RX_IND_PHY_ERR_CODE_GET(word) \
(((word) & HTT_RX_IND_PHY_ERR_CODE_M) >> \
HTT_RX_IND_PHY_ERR_CODE_S)
#define HTT_RX_IND_PHY_ERR_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_PHY_ERR, value); \
(word) |= (value) << HTT_RX_IND_PHY_ERR_S; \
} while (0)
#define HTT_RX_IND_PHY_ERR_GET(word) \
(((word) & HTT_RX_IND_PHY_ERR_M) >> \
HTT_RX_IND_PHY_ERR_S)
#define HTT_RX_IND_LEGACY_RATE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_LEGACY_RATE, value); \
(word) |= (value) << HTT_RX_IND_LEGACY_RATE_S; \
} while (0)
#define HTT_RX_IND_LEGACY_RATE_GET(word) \
(((word) & HTT_RX_IND_LEGACY_RATE_M) >> \
HTT_RX_IND_LEGACY_RATE_S)
#define HTT_RX_IND_LEGACY_RATE_SEL_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_LEGACY_RATE_SEL, value); \
(word) |= (value) << HTT_RX_IND_LEGACY_RATE_SEL_S; \
} while (0)
#define HTT_RX_IND_LEGACY_RATE_SEL_GET(word) \
(((word) & HTT_RX_IND_LEGACY_RATE_SEL_M) >> \
HTT_RX_IND_LEGACY_RATE_SEL_S)
#define HTT_RX_IND_END_VALID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_END_VALID, value); \
(word) |= (value) << HTT_RX_IND_END_VALID_S; \
} while (0)
#define HTT_RX_IND_END_VALID_GET(word) \
(((word) & HTT_RX_IND_END_VALID_M) >> \
HTT_RX_IND_END_VALID_S)
#define HTT_RX_IND_START_VALID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_START_VALID, value); \
(word) |= (value) << HTT_RX_IND_START_VALID_S; \
} while (0)
#define HTT_RX_IND_START_VALID_GET(word) \
(((word) & HTT_RX_IND_START_VALID_M) >> \
HTT_RX_IND_START_VALID_S)
#define HTT_RX_IND_RSSI_PRI20_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_RSSI_PRI20, value); \
(word) |= (value) << HTT_RX_IND_RSSI_PRI20_S; \
} while (0)
#define HTT_RX_IND_RSSI_PRI20_GET(word) \
(((word) & HTT_RX_IND_RSSI_PRI20_M) >> \
HTT_RX_IND_RSSI_PRI20_S)
#define HTT_RX_IND_RSSI_EXT20_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_RSSI_EXT20, value); \
(word) |= (value) << HTT_RX_IND_RSSI_EXT20_S; \
} while (0)
#define HTT_RX_IND_RSSI_EXT20_GET(word) \
(((word) & HTT_RX_IND_RSSI_EXT20_M) >> \
HTT_RX_IND_RSSI_EXT20_S)
#define HTT_RX_IND_RSSI_EXT40_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_RSSI_EXT40, value); \
(word) |= (value) << HTT_RX_IND_RSSI_EXT40_S; \
} while (0)
#define HTT_RX_IND_RSSI_EXT40_GET(word) \
(((word) & HTT_RX_IND_RSSI_EXT40_M) >> \
HTT_RX_IND_RSSI_EXT40_S)
#define HTT_RX_IND_RSSI_EXT80_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_RSSI_EXT80, value); \
(word) |= (value) << HTT_RX_IND_RSSI_EXT80_S; \
} while (0)
#define HTT_RX_IND_RSSI_EXT80_GET(word) \
(((word) & HTT_RX_IND_RSSI_EXT80_M) >> \
HTT_RX_IND_RSSI_EXT80_S)
#define HTT_RX_IND_VHT_SIG_A1_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_VHT_SIG_A1, value); \
(word) |= (value) << HTT_RX_IND_VHT_SIG_A1_S; \
} while (0)
#define HTT_RX_IND_VHT_SIG_A1_GET(word) \
(((word) & HTT_RX_IND_VHT_SIG_A1_M) >> \
HTT_RX_IND_VHT_SIG_A1_S)
#define HTT_RX_IND_VHT_SIG_A2_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_VHT_SIG_A2, value); \
(word) |= (value) << HTT_RX_IND_VHT_SIG_A2_S; \
} while (0)
#define HTT_RX_IND_VHT_SIG_A2_GET(word) \
(((word) & HTT_RX_IND_VHT_SIG_A2_M) >> \
HTT_RX_IND_VHT_SIG_A2_S)
#define HTT_RX_IND_PREAMBLE_TYPE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_PREAMBLE_TYPE, value); \
(word) |= (value) << HTT_RX_IND_PREAMBLE_TYPE_S; \
} while (0)
#define HTT_RX_IND_PREAMBLE_TYPE_GET(word) \
(((word) & HTT_RX_IND_PREAMBLE_TYPE_M) >> \
HTT_RX_IND_PREAMBLE_TYPE_S)
#define HTT_RX_IND_SERVICE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_SERVICE, value); \
(word) |= (value) << HTT_RX_IND_SERVICE_S; \
} while (0)
#define HTT_RX_IND_SERVICE_GET(word) \
(((word) & HTT_RX_IND_SERVICE_M) >> \
HTT_RX_IND_SERVICE_S)
#define HTT_RX_IND_SA_ANT_MATRIX_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_SA_ANT_MATRIX, value); \
(word) |= (value) << HTT_RX_IND_SA_ANT_MATRIX_S; \
} while (0)
#define HTT_RX_IND_SA_ANT_MATRIX_GET(word) \
(((word) & HTT_RX_IND_SA_ANT_MATRIX_M) >> \
HTT_RX_IND_SA_ANT_MATRIX_S)
#define HTT_RX_IND_MPDU_COUNT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_MPDU_COUNT, value); \
(word) |= (value) << HTT_RX_IND_MPDU_COUNT_S; \
} while (0)
#define HTT_RX_IND_MPDU_COUNT_GET(word) \
(((word) & HTT_RX_IND_MPDU_COUNT_M) >> HTT_RX_IND_MPDU_COUNT_S)
#define HTT_RX_IND_MPDU_STATUS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_IND_MPDU_STATUS, value); \
(word) |= (value) << HTT_RX_IND_MPDU_STATUS_S; \
} while (0)
#define HTT_RX_IND_MPDU_STATUS_GET(word) \
(((word) & HTT_RX_IND_MPDU_STATUS_M) >> HTT_RX_IND_MPDU_STATUS_S)
#define HTT_RX_IND_HL_BYTES \
(HTT_RX_IND_HDR_BYTES + \
4 /* single FW rx MSDU descriptor */ + \
4 /* single MPDU range information element */)
#define HTT_RX_IND_HL_SIZE32 (HTT_RX_IND_HL_BYTES >> 2)
/* Could we use one macro entry? */
#define HTT_WORD_SET(word, field, value) \
do { \
HTT_CHECK_SET_VAL(field, value); \
(word) |= ((value) << field ## _S); \
} while (0)
#define HTT_WORD_GET(word, field) \
(((word) & field ## _M) >> field ## _S)
PREPACK struct hl_htt_rx_ind_base {
A_UINT32 rx_ind_msg[HTT_RX_IND_HL_SIZE32]; /* align with LL case rx indication message, but reduced to 5 words */
} POSTPACK;
/*
* HTT_RX_IND_HL_RX_DESC_BASE_OFFSET
* Currently, we use a resv field in hl_htt_rx_ind_base to store some
* HL host needed info; refer to fw_rx_desc_base in wal_rx_desc.h.
* The field is just after the MSDU FW rx desc, and 1 byte ahead of
* htt_rx_ind_hl_rx_desc_t.
*/
#define HTT_RX_IND_HL_RX_DESC_BASE_OFFSET (HTT_RX_IND_FW_RX_DESC_BYTE_OFFSET + 1)
struct htt_rx_ind_hl_rx_desc_t {
A_UINT8 ver;
A_UINT8 len;
struct {
A_UINT8
first_msdu: 1,
last_msdu: 1,
c3_failed: 1,
c4_failed: 1,
ipv6: 1,
tcp: 1,
udp: 1,
reserved: 1;
} flags;
/* NOTE: no reserved space - don't append any new fields here */
};
#define HTT_RX_IND_HL_RX_DESC_VER_OFFSET \
(HTT_RX_IND_HL_RX_DESC_BASE_OFFSET \
+ offsetof(struct htt_rx_ind_hl_rx_desc_t, ver))
#define HTT_RX_IND_HL_RX_DESC_VER 0
#define HTT_RX_IND_HL_RX_DESC_LEN_OFFSET \
(HTT_RX_IND_HL_RX_DESC_BASE_OFFSET \
+ offsetof(struct htt_rx_ind_hl_rx_desc_t, len))
#define HTT_RX_IND_HL_FLAG_OFFSET \
(HTT_RX_IND_HL_RX_DESC_BASE_OFFSET \
+ offsetof(struct htt_rx_ind_hl_rx_desc_t, flags))
#define HTT_RX_IND_HL_FLAG_FIRST_MSDU (0x01 << 0)
#define HTT_RX_IND_HL_FLAG_LAST_MSDU (0x01 << 1)
#define HTT_RX_IND_HL_FLAG_C3_FAILED (0x01 << 2) /* L3 checksum failed */
#define HTT_RX_IND_HL_FLAG_C4_FAILED (0x01 << 3) /* L4 checksum failed */
#define HTT_RX_IND_HL_FLAG_IPV6 (0x01 << 4) /* is ipv6, or else ipv4 */
#define HTT_RX_IND_HL_FLAG_TCP (0x01 << 5) /* is tcp */
#define HTT_RX_IND_HL_FLAG_UDP (0x01 << 6) /* is udp */
/* This structure is used in HL, the basic descriptor information
* used by host. the structure is translated by FW from HW desc
* or generated by FW. But in HL monitor mode, the host would use
* the same structure with LL.
*/
PREPACK struct hl_htt_rx_desc_base {
A_UINT32
seq_num:12,
encrypted:1,
chan_info_present:1,
resv0:2,
mcast_bcast:1,
fragment:1,
key_id_oct:8,
resv1:6;
A_UINT32
pn_31_0;
union {
struct {
A_UINT16 pn_47_32;
A_UINT16 pn_63_48;
} pn16;
A_UINT32 pn_63_32;
} u0;
A_UINT32
pn_95_64;
A_UINT32
pn_127_96;
} POSTPACK;
/*
* Channel information can optionally be appended after hl_htt_rx_desc_base.
* If so, the len field in htt_rx_ind_hl_rx_desc_t will be updated accordingly,
* and the chan_info_present flag in hl_htt_rx_desc_base will be set.
* Please see htt_chan_change_t for description of the fields.
*/
PREPACK struct htt_chan_info_t
{
A_UINT32 primary_chan_center_freq_mhz: 16,
contig_chan1_center_freq_mhz: 16;
A_UINT32 contig_chan2_center_freq_mhz: 16,
phy_mode: 8,
reserved: 8;
} POSTPACK;
#define HTT_CHAN_INFO_SIZE sizeof(struct htt_chan_info_t)
#define HL_RX_DESC_SIZE (sizeof(struct hl_htt_rx_desc_base))
#define HL_RX_DESC_SIZE_DWORD (HL_RX_STD_DESC_SIZE >> 2)
#define HTT_HL_RX_DESC_MPDU_SEQ_NUM_M 0xfff
#define HTT_HL_RX_DESC_MPDU_SEQ_NUM_S 0
#define HTT_HL_RX_DESC_MPDU_ENC_M 0x1000
#define HTT_HL_RX_DESC_MPDU_ENC_S 12
#define HTT_HL_RX_DESC_CHAN_INFO_PRESENT_M 0x2000
#define HTT_HL_RX_DESC_CHAN_INFO_PRESENT_S 13
#define HTT_HL_RX_DESC_MCAST_BCAST_M 0x10000
#define HTT_HL_RX_DESC_MCAST_BCAST_S 16
#define HTT_HL_RX_DESC_FRAGMENT_M 0x20000
#define HTT_HL_RX_DESC_FRAGMENT_S 17
#define HTT_HL_RX_DESC_KEY_ID_OCT_M 0x3fc0000
#define HTT_HL_RX_DESC_KEY_ID_OCT_S 18
#define HTT_HL_RX_DESC_PN_OFFSET offsetof(struct hl_htt_rx_desc_base, pn_31_0)
#define HTT_HL_RX_DESC_PN_WORD_OFFSET (HTT_HL_RX_DESC_PN_OFFSET >> 2)
/* Channel information */
#define HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_M 0x0000ffff
#define HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_S 0
#define HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_M 0xffff0000
#define HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_S 16
#define HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_M 0x0000ffff
#define HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_S 0
#define HTT_CHAN_INFO_PHY_MODE_M 0x00ff0000
#define HTT_CHAN_INFO_PHY_MODE_S 16
#define HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ, value); \
(word) |= (value) << HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_S; \
} while (0)
#define HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_GET(word) \
(((word) & HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_M) >> HTT_CHAN_INFO_PRIMARY_CHAN_CENTER_FREQ_S)
#define HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ, value); \
(word) |= (value) << HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_S; \
} while (0)
#define HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_GET(word) \
(((word) & HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_M) >> HTT_CHAN_INFO_CONTIG_CHAN1_CENTER_FREQ_S)
#define HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ, value); \
(word) |= (value) << HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_S; \
} while (0)
#define HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_GET(word) \
(((word) & HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_M) >> HTT_CHAN_INFO_CONTIG_CHAN2_CENTER_FREQ_S)
#define HTT_CHAN_INFO_PHY_MODE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_INFO_PHY_MODE, value); \
(word) |= (value) << HTT_CHAN_INFO_PHY_MODE_S; \
} while (0)
#define HTT_CHAN_INFO_PHY_MODE_GET(word) \
(((word) & HTT_CHAN_INFO_PHY_MODE_M) >> HTT_CHAN_INFO_PHY_MODE_S)
/*
* @brief target -> host message definition for FW offloaded pkts
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_TX_OFFLOAD_DELIVER_IND
*
* @details
* The following field definitions describe the format of the firmware
* offload deliver message sent from the target to the host.
*
* definition for struct htt_tx_offload_deliver_ind_hdr_t
*
* |31 20|19 16|15 13|12 8|7 5|4|3|2 0|
* |----------------------------+--------+-----+---------------+-----+-+-+----|
* | reserved_1 | msg type |
* |--------------------------------------------------------------------------|
* | phy_timestamp_l32 |
* |--------------------------------------------------------------------------|
* | WORD2 (see below) |
* |--------------------------------------------------------------------------|
* | seqno | framectrl |
* |--------------------------------------------------------------------------|
* | reserved_3 | vdev_id | tid_num|
* |--------------------------------------------------------------------------|
* | reserved_4 | tx_mpdu_bytes |F|STAT|
* |--------------------------------------------------------------------------|
*
* where:
* STAT = status
* F = format (802.3 vs. 802.11)
*
* definition for word 2
*
* |31 26|25| 24 |23 | 22 |21 19|18 17|16 9|8 6|5 2|1 0|
* |--------+--+----+---+----+-----+-----+---------------------+----+-----+---|
* |reserv_2|BF|LDPC|SGI|STBC| BW | NSS | RSSI |RATE| MCS |PR |
* |--------------------------------------------------------------------------|
*
* where:
* PR = preamble
* BF = beamformed
*/
PREPACK struct htt_tx_offload_deliver_ind_hdr_t
{
A_UINT32 /* word 0 */
msg_type:8, /* [ 7: 0] */
reserved_1:24; /* [31: 8] */
A_UINT32 phy_timestamp_l32; /* word 1 [31:0] */
A_UINT32 /* word 2 */
/* preamble:
* 0-OFDM,
* 1-CCk,
* 2-HT,
* 3-VHT
*/
preamble: 2, /* [1:0] */
/* mcs:
* In case of HT preamble interpret
* MCS along with NSS.
* Valid values for HT are 0 to 7.
* HT mcs 0 with NSS 2 is mcs 8.
* Valid values for VHT are 0 to 9.
*/
mcs: 4, /* [5:2] */
/* rate:
* This is applicable only for
* CCK and OFDM preamble type
* rate 0: OFDM 48 Mbps,
* 1: OFDM 24 Mbps,
* 2: OFDM 12 Mbps
* 3: OFDM 6 Mbps
* 4: OFDM 54 Mbps
* 5: OFDM 36 Mbps
* 6: OFDM 18 Mbps
* 7: OFDM 9 Mbps
* rate 0: CCK 11 Mbps Long
* 1: CCK 5.5 Mbps Long
* 2: CCK 2 Mbps Long
* 3: CCK 1 Mbps Long
* 4: CCK 11 Mbps Short
* 5: CCK 5.5 Mbps Short
* 6: CCK 2 Mbps Short
*/
rate : 3, /* [ 8: 6] */
rssi : 8, /* [16: 9] units=dBm */
nss : 2, /* [18:17] if nss 1 means 1ss and 2 means 2ss */
bw : 3, /* [21:19] (0=>20MHz, 1=>40MHz, 2=>80MHz, 3=>160MHz) */
stbc : 1, /* [22] */
sgi : 1, /* [23] */
ldpc : 1, /* [24] */
beamformed: 1, /* [25] */
reserved_2: 6; /* [31:26] */
A_UINT32 /* word 3 */
framectrl:16, /* [15: 0] */
seqno:16; /* [31:16] */
A_UINT32 /* word 4 */
tid_num:5, /* [ 4: 0] actual TID number */
vdev_id:8, /* [12: 5] */
reserved_3:19; /* [31:13] */
A_UINT32 /* word 5 */
/* status:
* 0: tx_ok
* 1: retry
* 2: drop
* 3: filtered
* 4: abort
* 5: tid delete
* 6: sw abort
* 7: dropped by peer migration
*/
status:3, /* [2:0] */
format:1, /* [3] 0: 802.3 format, 1: 802.11 format */
tx_mpdu_bytes:16, /* [19:4] */
/* Indicates retry count of offloaded/local generated Data tx frames */
tx_retry_cnt:6, /* [25:20] */
reserved_4:6; /* [31:26] */
} POSTPACK;
/* FW offload deliver ind message header fields */
/* DWORD one */
#define HTT_FW_OFFLOAD_IND_PHY_TIMESTAMP_L32_M 0xffffffff
#define HTT_FW_OFFLOAD_IND_PHY_TIMESTAMP_L32_S 0
/* DWORD two */
#define HTT_FW_OFFLOAD_IND_PREAMBLE_M 0x00000003
#define HTT_FW_OFFLOAD_IND_PREAMBLE_S 0
#define HTT_FW_OFFLOAD_IND_MCS_M 0x0000003c
#define HTT_FW_OFFLOAD_IND_MCS_S 2
#define HTT_FW_OFFLOAD_IND_RATE_M 0x000001c0
#define HTT_FW_OFFLOAD_IND_RATE_S 6
#define HTT_FW_OFFLOAD_IND_RSSI_M 0x0001fe00
#define HTT_FW_OFFLOAD_IND_RSSI_S 9
#define HTT_FW_OFFLOAD_IND_NSS_M 0x00060000
#define HTT_FW_OFFLOAD_IND_NSS_S 17
#define HTT_FW_OFFLOAD_IND_BW_M 0x00380000
#define HTT_FW_OFFLOAD_IND_BW_S 19
#define HTT_FW_OFFLOAD_IND_STBC_M 0x00400000
#define HTT_FW_OFFLOAD_IND_STBC_S 22
#define HTT_FW_OFFLOAD_IND_SGI_M 0x00800000
#define HTT_FW_OFFLOAD_IND_SGI_S 23
#define HTT_FW_OFFLOAD_IND_LDPC_M 0x01000000
#define HTT_FW_OFFLOAD_IND_LDPC_S 24
#define HTT_FW_OFFLOAD_IND_BEAMFORMED_M 0x02000000
#define HTT_FW_OFFLOAD_IND_BEAMFORMED_S 25
/* DWORD three*/
#define HTT_FW_OFFLOAD_IND_FRAMECTRL_M 0x0000ffff
#define HTT_FW_OFFLOAD_IND_FRAMECTRL_S 0
#define HTT_FW_OFFLOAD_IND_SEQNO_M 0xffff0000
#define HTT_FW_OFFLOAD_IND_SEQNO_S 16
/* DWORD four */
#define HTT_FW_OFFLOAD_IND_TID_NUM_M 0x0000001f
#define HTT_FW_OFFLOAD_IND_TID_NUM_S 0
#define HTT_FW_OFFLOAD_IND_VDEV_ID_M 0x00001fe0
#define HTT_FW_OFFLOAD_IND_VDEV_ID_S 5
/* DWORD five */
#define HTT_FW_OFFLOAD_IND_STATUS_M 0x00000007
#define HTT_FW_OFFLOAD_IND_STATUS_S 0
#define HTT_FW_OFFLOAD_IND_FORMAT_M 0x00000008
#define HTT_FW_OFFLOAD_IND_FORMAT_S 3
#define HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES_M 0x000ffff0
#define HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES_S 4
#define HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_M 0x03f00000
#define HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_S 20
#define HTT_FW_OFFLOAD_IND_PHY_TIMESTAMP_L32_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_PHY_TIMESTAMP_L32, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_PHY_TIMESTAMP_L32_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_PHY_TIMESTAMP_L32_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_PHY_TIMESTAMP_L32_M) >> HTT_FW_OFFLOAD_IND_PHY_TIMESTAMP_L32_S)
#define HTT_FW_OFFLOAD_IND_PREAMBLE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_PREAMBLE, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_PREAMBLE_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_PREAMBLE_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_PREAMBLE_M) >> HTT_FW_OFFLOAD_IND_PREAMBLE_S)
#define HTT_FW_OFFLOAD_IND_MCS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_MCS, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_MCS_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_MCS_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_MCS_M) >> HTT_FW_OFFLOAD_IND_MCS_S)
#define HTT_FW_OFFLOAD_IND_RATE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_RATE, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_RATE_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_RATE_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_RATE_M) >> HTT_FW_OFFLOAD_IND_RATE_S)
#define HTT_FW_OFFLOAD_IND_RSSI_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_RSSI, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_RSSI_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_RSSI_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_RSSI_M) >> HTT_FW_OFFLOAD_IND_RSSI_S)
#define HTT_FW_OFFLOAD_IND_NSS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_NSS, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_NSS_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_NSS_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_NSS_M) >> HTT_FW_OFFLOAD_IND_NSS_S)
#define HTT_FW_OFFLOAD_IND_BW_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_BW, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_BW_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_BW_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_BW_M) >> HTT_FW_OFFLOAD_IND_BW_S)
#define HTT_FW_OFFLOAD_IND_STBC_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_STBC, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_STBC_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_STBC_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_STBC_M) >> HTT_FW_OFFLOAD_IND_STBC_S)
#define HTT_FW_OFFLOAD_IND_SGI_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_SGI, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_SGI_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_SGI_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_SGI_M) >> HTT_FW_OFFLOAD_IND_SGI_S)
#define HTT_FW_OFFLOAD_IND_LDPC_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_LDPC, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_LDPC_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_LDPC_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_LDPC_M) >> HTT_FW_OFFLOAD_IND_LDPC_S)
#define HTT_FW_OFFLOAD_IND_BEAMFORMED_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_BEAMFORMED, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_BEAMFORMED_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_BEAMFORMED_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_BEAMFORMED_M) >> HTT_FW_OFFLOAD_IND_BEAMFORMED_S)
#define HTT_FW_OFFLOAD_IND_FRAMECTRL_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_FRAMECTRL, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_FRAMECTRL_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_FRAMECTRL_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_FRAMECTRL_M) >> HTT_FW_OFFLOAD_IND_FRAMECTRL_S)
#define HTT_FW_OFFLOAD_IND_SEQNO_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_SEQNO, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_SEQNO_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_SEQNO_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_SEQNO_M) >> HTT_FW_OFFLOAD_IND_SEQNO_S)
#define HTT_FW_OFFLOAD_IND_TID_NUM_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_TID_NUM, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_TID_NUM_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_TID_NUM_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_TID_NUM_M) >> HTT_FW_OFFLOAD_IND_TID_NUM_S)
#define HTT_FW_OFFLOAD_IND_VDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_VDEV_ID, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_VDEV_ID_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_VDEV_ID_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_VDEV_ID_M) >> HTT_FW_OFFLOAD_IND_VDEV_ID_S)
#define HTT_FW_OFFLOAD_IND_STATUS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_STATUS, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_STATUS_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_STATUS_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_STATUS_M) >> HTT_FW_OFFLOAD_IND_STATUS_M)
#define HTT_FW_OFFLOAD_IND_FORMAT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_FORMAT, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_FORMAT_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_FORMAT_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_FORMAT_M) >> HTT_FW_OFFLOAD_IND_FORMAT_S)
#define HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES_M) >> HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES_S)
#define HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_TX_RETRY_CNT, value); \
(word) |= (value) << HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_S; \
} while (0)
#define HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_GET(word) \
(((word) & HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_M) >> HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_S)
/*
* @brief target -> host rx reorder flush message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_FLUSH
*
* @details
* The following field definitions describe the format of the rx flush
* message sent from the target to the host.
* The message consists of a 4-octet header, followed by one or more
* 4-octet payload information elements.
*
* |31 24|23 8|7 0|
* |--------------------------------------------------------------|
* | TID | peer ID | msg type |
* |--------------------------------------------------------------|
* | seq num end | seq num start | MPDU status | reserved |
* |--------------------------------------------------------------|
* First DWORD:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an rx flush message
* Value: 0x2 (HTT_T2H_MSG_TYPE_RX_FLUSH)
* - PEER_ID
* Bits 23:8 (only bits 18:8 actually used)
* Purpose: identify which peer's rx data is being flushed
* Value: (rx) peer ID
* - TID
* Bits 31:24 (only bits 27:24 actually used)
* Purpose: Specifies which traffic identifier's rx data is being flushed
* Value: traffic identifier
* Second DWORD:
* - MPDU_STATUS
* Bits 15:8
* Purpose:
* Indicate whether the flushed MPDUs should be discarded or processed.
* Value:
* 0x1: send the MPDUs from the rx reorder buffer to subsequent
* stages of rx processing
* other: discard the MPDUs
* It is anticipated that flush messages will always have
* MPDU status == 1, but the status flag is included for
* flexibility.
* - SEQ_NUM_START
* Bits 23:16
* Purpose:
* Indicate the start of a series of consecutive MPDUs being flushed.
* Not all MPDUs within this range are necessarily valid - the host
* must check each sequence number within this range to see if the
* corresponding MPDU is actually present.
* Value:
* The sequence number for the first MPDU in the sequence.
* This sequence number is the 6 LSBs of the 802.11 sequence number.
* - SEQ_NUM_END
* Bits 30:24
* Purpose:
* Indicate the end of a series of consecutive MPDUs being flushed.
* Value:
* The sequence number one larger than the sequence number of the
* last MPDU being flushed.
* This sequence number is the 6 LSBs of the 802.11 sequence number.
* The range of MPDUs from [SEQ_NUM_START,SEQ_NUM_END-1] inclusive
* are to be released for further rx processing.
* Not all MPDUs within this range are necessarily valid - the host
* must check each sequence number within this range to see if the
* corresponding MPDU is actually present.
*/
/* first DWORD */
#define HTT_RX_FLUSH_PEER_ID_M 0xffff00
#define HTT_RX_FLUSH_PEER_ID_S 8
#define HTT_RX_FLUSH_TID_M 0xff000000
#define HTT_RX_FLUSH_TID_S 24
/* second DWORD */
#define HTT_RX_FLUSH_MPDU_STATUS_M 0x0000ff00
#define HTT_RX_FLUSH_MPDU_STATUS_S 8
#define HTT_RX_FLUSH_SEQ_NUM_START_M 0x00ff0000
#define HTT_RX_FLUSH_SEQ_NUM_START_S 16
#define HTT_RX_FLUSH_SEQ_NUM_END_M 0xff000000
#define HTT_RX_FLUSH_SEQ_NUM_END_S 24
#define HTT_RX_FLUSH_BYTES 8
#define HTT_RX_FLUSH_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FLUSH_PEER_ID, value); \
(word) |= (value) << HTT_RX_FLUSH_PEER_ID_S; \
} while (0)
#define HTT_RX_FLUSH_PEER_ID_GET(word) \
(((word) & HTT_RX_FLUSH_PEER_ID_M) >> HTT_RX_FLUSH_PEER_ID_S)
#define HTT_RX_FLUSH_TID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FLUSH_TID, value); \
(word) |= (value) << HTT_RX_FLUSH_TID_S; \
} while (0)
#define HTT_RX_FLUSH_TID_GET(word) \
(((word) & HTT_RX_FLUSH_TID_M) >> HTT_RX_FLUSH_TID_S)
#define HTT_RX_FLUSH_MPDU_STATUS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FLUSH_MPDU_STATUS, value); \
(word) |= (value) << HTT_RX_FLUSH_MPDU_STATUS_S; \
} while (0)
#define HTT_RX_FLUSH_MPDU_STATUS_GET(word) \
(((word) & HTT_RX_FLUSH_MPDU_STATUS_M) >> HTT_RX_FLUSH_MPDU_STATUS_S)
#define HTT_RX_FLUSH_SEQ_NUM_START_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FLUSH_SEQ_NUM_START, value); \
(word) |= (value) << HTT_RX_FLUSH_SEQ_NUM_START_S; \
} while (0)
#define HTT_RX_FLUSH_SEQ_NUM_START_GET(word) \
(((word) & HTT_RX_FLUSH_SEQ_NUM_START_M) >> HTT_RX_FLUSH_SEQ_NUM_START_S)
#define HTT_RX_FLUSH_SEQ_NUM_END_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_FLUSH_SEQ_NUM_END, value); \
(word) |= (value) << HTT_RX_FLUSH_SEQ_NUM_END_S; \
} while (0)
#define HTT_RX_FLUSH_SEQ_NUM_END_GET(word) \
(((word) & HTT_RX_FLUSH_SEQ_NUM_END_M) >> HTT_RX_FLUSH_SEQ_NUM_END_S)
/*
* @brief target -> host rx pn check indication message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_PN_IND
*
* @details
* The following field definitions describe the format of the Rx PN check
* indication message sent from the target to the host.
* The message consists of a 4-octet header, followed by the start and
* end sequence numbers to be released, followed by the PN IEs. Each PN
* IE is one octet containing the sequence number that failed the PN
* check.
*
* |31 24|23 8|7 0|
* |--------------------------------------------------------------|
* | TID | peer ID | msg type |
* |--------------------------------------------------------------|
* | Reserved | PN IE count | seq num end | seq num start|
* |--------------------------------------------------------------|
* l : PN IE 2 | PN IE 1 | PN IE 0 |
* |--------------------------------------------------------------|
* First DWORD:
* - MSG_TYPE
* Bits 7:0
* Purpose: Identifies this as an rx pn check indication message
* Value: 0x10 (HTT_T2H_MSG_TYPE_RX_PN_IND)
* - PEER_ID
* Bits 23:8 (only bits 18:8 actually used)
* Purpose: identify which peer
* Value: (rx) peer ID
* - TID
* Bits 31:24 (only bits 27:24 actually used)
* Purpose: identify traffic identifier
* Value: traffic identifier
* Second DWORD:
* - SEQ_NUM_START
* Bits 7:0
* Purpose:
* Indicates the starting sequence number of the MPDU in this
* series of MPDUs that went though PN check.
* Value:
* The sequence number for the first MPDU in the sequence.
* This sequence number is the 6 LSBs of the 802.11 sequence number.
* - SEQ_NUM_END
* Bits 15:8
* Purpose:
* Indicates the ending sequence number of the MPDU in this
* series of MPDUs that went though PN check.
* Value:
* The sequence number one larger then the sequence number of the last
* MPDU being flushed.
* This sequence number is the 6 LSBs of the 802.11 sequence number.
* The range of MPDUs from [SEQ_NUM_START,SEQ_NUM_END-1] have been checked
* for invalid PN numbers and are ready to be released for further processing.
* Not all MPDUs within this range are necessarily valid - the host
* must check each sequence number within this range to see if the
* corresponding MPDU is actually present.
* - PN_IE_COUNT
* Bits 23:16
* Purpose:
* Used to determine the variable number of PN information elements in this
* message
*
* PN information elements:
* - PN_IE_x-
* Purpose:
* Each PN information element contains the sequence number of the MPDU that
* has failed the target PN check.
* Value:
* Contains the 6 LSBs of the 802.11 sequence number corresponding to the MPDU
* that failed the PN check.
*/
/* first DWORD */
#define HTT_RX_PN_IND_PEER_ID_M 0xffff00
#define HTT_RX_PN_IND_PEER_ID_S 8
#define HTT_RX_PN_IND_TID_M 0xff000000
#define HTT_RX_PN_IND_TID_S 24
/* second DWORD */
#define HTT_RX_PN_IND_SEQ_NUM_START_M 0x000000ff
#define HTT_RX_PN_IND_SEQ_NUM_START_S 0
#define HTT_RX_PN_IND_SEQ_NUM_END_M 0x0000ff00
#define HTT_RX_PN_IND_SEQ_NUM_END_S 8
#define HTT_RX_PN_IND_PN_IE_CNT_M 0x00ff0000
#define HTT_RX_PN_IND_PN_IE_CNT_S 16
#define HTT_RX_PN_IND_BYTES 8
#define HTT_RX_PN_IND_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PN_IND_PEER_ID, value); \
(word) |= (value) << HTT_RX_PN_IND_PEER_ID_S; \
} while (0)
#define HTT_RX_PN_IND_PEER_ID_GET(word) \
(((word) & HTT_RX_PN_IND_PEER_ID_M) >> HTT_RX_PN_IND_PEER_ID_S)
#define HTT_RX_PN_IND_EXT_TID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PN_IND_TID, value); \
(word) |= (value) << HTT_RX_PN_IND_TID_S; \
} while (0)
#define HTT_RX_PN_IND_EXT_TID_GET(word) \
(((word) & HTT_RX_PN_IND_TID_M) >> HTT_RX_PN_IND_TID_S)
#define HTT_RX_PN_IND_SEQ_NUM_START_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PN_IND_SEQ_NUM_START, value); \
(word) |= (value) << HTT_RX_PN_IND_SEQ_NUM_START_S; \
} while (0)
#define HTT_RX_PN_IND_SEQ_NUM_START_GET(word) \
(((word) & HTT_RX_PN_IND_SEQ_NUM_START_M) >> HTT_RX_PN_IND_SEQ_NUM_START_S)
#define HTT_RX_PN_IND_SEQ_NUM_END_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PN_IND_SEQ_NUM_END, value); \
(word) |= (value) << HTT_RX_PN_IND_SEQ_NUM_END_S; \
} while (0)
#define HTT_RX_PN_IND_SEQ_NUM_END_GET(word) \
(((word) & HTT_RX_PN_IND_SEQ_NUM_END_M) >> HTT_RX_PN_IND_SEQ_NUM_END_S)
#define HTT_RX_PN_IND_PN_IE_CNT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PN_IND_PN_IE_CNT, value); \
(word) |= (value) << HTT_RX_PN_IND_PN_IE_CNT_S; \
} while (0)
#define HTT_RX_PN_IND_PN_IE_CNT_GET(word) \
(((word) & HTT_RX_PN_IND_PN_IE_CNT_M) >> HTT_RX_PN_IND_PN_IE_CNT_S)
/*
* @brief target -> host rx offload deliver message for LL system
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_OFFLOAD_DELIVER_IND
*
* @details
* In a low latency system this message is sent whenever the offload
* manager flushes out the packets it has coalesced in its coalescing buffer.
* The DMA of the actual packets into host memory is done before sending out
* this message. This message indicates only how many MSDUs to reap. The
* peer ID, vdev ID, tid and MSDU length are copied inline into the header
* portion of the MSDU while DMA'ing into the host memory. Unlike the packets
* DMA'd by the MAC directly into host memory these packets do not contain
* the MAC descriptors in the header portion of the packet. Instead they contain
* the peer ID, vdev ID, tid and MSDU length. Also when the host receives this
* message, the packets are delivered directly to the NW stack without going
* through the regular reorder buffering and PN checking path since it has
* already been done in target.
*
* |31 24|23 16|15 8|7 0|
* |-----------------------------------------------------------------------|
* | Total MSDU count | reserved | msg type |
* |-----------------------------------------------------------------------|
*
* @brief target -> host rx offload deliver message for HL system
*
* @details
* In a high latency system this message is sent whenever the offload manager
* flushes out the packets it has coalesced in its coalescing buffer. The
* actual packets are also carried along with this message. When the host
* receives this message, it is expected to deliver these packets to the NW
* stack directly instead of routing them through the reorder buffering and
* PN checking path since it has already been done in target.
*
* |31 24|23 16|15 8|7 0|
* |-----------------------------------------------------------------------|
* | Total MSDU count | reserved | msg type |
* |-----------------------------------------------------------------------|
* | peer ID | MSDU length |
* |-----------------------------------------------------------------------|
* | MSDU payload | FW Desc | tid | vdev ID |
* |-----------------------------------------------------------------------|
* | MSDU payload contd. |
* |-----------------------------------------------------------------------|
* | peer ID | MSDU length |
* |-----------------------------------------------------------------------|
* | MSDU payload | FW Desc | tid | vdev ID |
* |-----------------------------------------------------------------------|
* | MSDU payload contd. |
* |-----------------------------------------------------------------------|
*
*/
/* first DWORD */
#define HTT_RX_OFFLOAD_DELIVER_IND_HDR_BYTES 4
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_HDR_BYTES 7
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_M 0xffff0000
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_S 16
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_M 0x0000ffff
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_S 0
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_M 0xffff0000
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_S 16
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_M 0x000000ff
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_S 0
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_M 0x0000ff00
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_S 8
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_M 0x00ff0000
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_S 16
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_GET(word) \
(((word) & HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_M) >> HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_S)
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT, value); \
(word) |= (value) << HTT_RX_OFFLOAD_DELIVER_IND_MSDU_CNT_S; \
} while (0)
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_GET(word) \
(((word) & HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_M) >> HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_S)
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN, value); \
(word) |= (value) << HTT_RX_OFFLOAD_DELIVER_IND_MSDU_LEN_S; \
} while (0)
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_GET(word) \
(((word) & HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_M) >> HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_S)
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID, value); \
(word) |= (value) << HTT_RX_OFFLOAD_DELIVER_IND_MSDU_PEER_ID_S; \
} while (0)
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_GET(word) \
(((word) & HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_M) >> HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_S)
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID, value); \
(word) |= (value) << HTT_RX_OFFLOAD_DELIVER_IND_MSDU_VDEV_ID_S; \
} while (0)
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_GET(word) \
(((word) & HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_M) >> HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_S)
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID, value); \
(word) |= (value) << HTT_RX_OFFLOAD_DELIVER_IND_MSDU_TID_S; \
} while (0)
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_GET(word) \
(((word) & HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_M) >> HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_S)
#define HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC, value); \
(word) |= (value) << HTT_RX_OFFLOAD_DELIVER_IND_MSDU_DESC_S; \
} while (0)
/**
* @brief target -> host rx peer map/unmap message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_PEER_MAP
*
* @details
* The following diagram shows the format of the rx peer map message sent
* from the target to the host. This layout assumes the target operates
* as little-endian.
*
* This message always contains a SW peer ID. The main purpose of the
* SW peer ID is to tell the host what peer ID rx packets will be tagged
* with, so that the host can use that peer ID to determine which peer
* transmitted the rx frame. This SW peer ID is sometimes also used for
* other purposes, such as identifying during tx completions which peer
* the tx frames in question were transmitted to.
*
* In certain generations of chips, the peer map message also contains
* a HW peer ID. This HW peer ID is used during rx --> tx frame forwarding
* to identify which peer the frame needs to be forwarded to (i.e. the
* peer associated with the Destination MAC Address within the packet),
* and particularly which vdev needs to transmit the frame (for cases
* of inter-vdev rx --> tx forwarding). The HW peer id here is the same
* meaning as AST_INDEX_0.
* This DA-based peer ID that is provided for certain rx frames
* (the rx frames that need to be re-transmitted as tx frames)
* is the ID that the HW uses for referring to the peer in question,
* rather than the peer ID that the SW+FW use to refer to the peer.
*
*
* |31 24|23 16|15 8|7 0|
* |-----------------------------------------------------------------------|
* | SW peer ID | VDEV ID | msg type |
* |-----------------------------------------------------------------------|
* | MAC addr 3 | MAC addr 2 | MAC addr 1 | MAC addr 0 |
* |-----------------------------------------------------------------------|
* | HW peer ID / AST index 0 | MAC addr 5 | MAC addr 4 |
* |-----------------------------------------------------------------------|
*
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_PEER_UNMAP
*
* The following diagram shows the format of the rx peer unmap message sent
* from the target to the host.
*
* |31 24|23 16|15 8|7 0|
* |-----------------------------------------------------------------------|
* | SW peer ID | VDEV ID | msg type |
* |-----------------------------------------------------------------------|
*
* The following field definitions describe the format of the rx peer map
* and peer unmap messages sent from the target to the host.
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an rx peer map or peer unmap message
* Value: peer map -> 0x3 (HTT_T2H_MSG_TYPE_PEER_MAP),
* peer unmap -> 0x4 (HTT_T2H_MSG_TYPE_PEER_UNMAP)
* - VDEV_ID
* Bits 15:8
* Purpose: Indicates which virtual device the peer is associated
* with.
* Value: vdev ID (used in the host to look up the vdev object)
* - PEER_ID (a.k.a. SW_PEER_ID)
* Bits 31:16
* Purpose: The peer ID (index) that WAL is allocating (map) or
* freeing (unmap)
* Value: (rx) peer ID
* - MAC_ADDR_L32 (peer map only)
* Bits 31:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: lower 4 bytes of peer node's MAC address
* - MAC_ADDR_U16 (peer map only)
* Bits 15:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: upper 2 bytes of peer node's MAC address
* - HW_PEER_ID
* Bits 31:16
* Purpose: Identifies the HW peer ID corresponding to the peer MAC
* address, so for rx frames marked for rx --> tx forwarding, the
* host can determine from the HW peer ID provided as meta-data with
* the rx frame which peer the frame is supposed to be forwarded to.
* Value: ID used by the MAC HW to identify the peer
*/
#define HTT_RX_PEER_MAP_VDEV_ID_M 0xff00
#define HTT_RX_PEER_MAP_VDEV_ID_S 8
#define HTT_RX_PEER_MAP_PEER_ID_M 0xffff0000
#define HTT_RX_PEER_MAP_PEER_ID_S 16
#define HTT_RX_PEER_MAP_SW_PEER_ID_M HTT_RX_PEER_MAP_PEER_ID_M /* alias */
#define HTT_RX_PEER_MAP_SW_PEER_ID_S HTT_RX_PEER_MAP_PEER_ID_S /* alias */
#define HTT_RX_PEER_MAP_MAC_ADDR_L32_M 0xffffffff
#define HTT_RX_PEER_MAP_MAC_ADDR_L32_S 0
#define HTT_RX_PEER_MAP_MAC_ADDR_U16_M 0xffff
#define HTT_RX_PEER_MAP_MAC_ADDR_U16_S 0
#define HTT_RX_PEER_MAP_HW_PEER_ID_M 0xffff0000
#define HTT_RX_PEER_MAP_HW_PEER_ID_S 16
#define HTT_RX_PEER_MAP_VAP_ID_SET HTT_RX_PEER_MAP_VDEV_ID_SET /* deprecated */
#define HTT_RX_PEER_MAP_VDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_VDEV_ID, value); \
(word) |= (value) << HTT_RX_PEER_MAP_VDEV_ID_S; \
} while (0)
#define HTT_RX_PEER_MAP_VAP_ID_GET HTT_RX_PEER_MAP_VDEV_ID_GET /* deprecated */
#define HTT_RX_PEER_MAP_VDEV_ID_GET(word) \
(((word) & HTT_RX_PEER_MAP_VDEV_ID_M) >> HTT_RX_PEER_MAP_VDEV_ID_S)
#define HTT_RX_PEER_MAP_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_PEER_ID, value); \
(word) |= (value) << HTT_RX_PEER_MAP_PEER_ID_S; \
} while (0)
#define HTT_RX_PEER_MAP_PEER_ID_GET(word) \
(((word) & HTT_RX_PEER_MAP_PEER_ID_M) >> HTT_RX_PEER_MAP_PEER_ID_S)
#define HTT_RX_PEER_MAP_SW_PEER_ID_SET HTT_RX_PEER_MAP_PEER_ID_SET /* alias */
#define HTT_RX_PEER_MAP_SW_PEER_ID_GET HTT_RX_PEER_MAP_PEER_ID_GET /* alias */
#define HTT_RX_PEER_MAP_HW_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_HW_PEER_ID, value); \
(word) |= (value) << HTT_RX_PEER_MAP_HW_PEER_ID_S; \
} while (0)
#define HTT_RX_PEER_MAP_HW_PEER_ID_GET(word) \
(((word) & HTT_RX_PEER_MAP_HW_PEER_ID_M) >> HTT_RX_PEER_MAP_HW_PEER_ID_S)
#define HTT_RX_PEER_MAP_MAC_ADDR_OFFSET 4 /* bytes */
#define HTT_RX_PEER_MAP_HW_PEER_ID_OFFSET 8 /* bytes */
#define HTT_RX_PEER_MAP_BYTES 12
#define HTT_RX_PEER_UNMAP_PEER_ID_M HTT_RX_PEER_MAP_PEER_ID_M
#define HTT_RX_PEER_UNMAP_PEER_ID_S HTT_RX_PEER_MAP_PEER_ID_S
#define HTT_RX_PEER_UNMAP_SW_PEER_ID_M HTT_RX_PEER_MAP_SW_PEER_ID_M
#define HTT_RX_PEER_UNMAP_SW_PEER_ID_S HTT_RX_PEER_MAP_SW_PEER_ID_S
#define HTT_RX_PEER_UNMAP_PEER_ID_SET HTT_RX_PEER_MAP_PEER_ID_SET
#define HTT_RX_PEER_UNMAP_PEER_ID_GET HTT_RX_PEER_MAP_PEER_ID_GET
#define HTT_RX_PEER_UNMAP_VDEV_ID_SET HTT_RX_PEER_MAP_VDEV_ID_SET
#define HTT_RX_PEER_UNMAP_VDEV_ID_GET HTT_RX_PEER_MAP_VDEV_ID_GET
#define HTT_RX_PEER_UNMAP_BYTES 4
/**
* @brief target -> host rx peer map V2 message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_PEER_MAP_V2
*
* @details
* The following diagram shows the format of the rx peer map v2 message sent
* from the target to the host. This layout assumes the target operates
* as little-endian.
*
* This message always contains a SW peer ID. The main purpose of the
* SW peer ID is to tell the host what peer ID rx packets will be tagged
* with, so that the host can use that peer ID to determine which peer
* transmitted the rx frame. This SW peer ID is sometimes also used for
* other purposes, such as identifying during tx completions which peer
* the tx frames in question were transmitted to.
*
* The peer map v2 message also contains a HW peer ID. This HW peer ID
* is used during rx --> tx frame forwarding to identify which peer the
* frame needs to be forwarded to (i.e. the peer associated with the
* Destination MAC Address within the packet), and particularly which vdev
* needs to transmit the frame (for cases of inter-vdev rx --> tx forwarding).
* This DA-based peer ID that is provided for certain rx frames
* (the rx frames that need to be re-transmitted as tx frames)
* is the ID that the HW uses for referring to the peer in question,
* rather than the peer ID that the SW+FW use to refer to the peer.
*
* The HW peer id here is the same meaning as AST_INDEX_0.
* Some chips support up to 4 AST indices per peer: AST_INDEX_0, AST_INDEX_1,
* AST_INDEX_2, and AST_INDEX_3. AST 0 is always valid; for AST 1 through
* AST 3, check the AST_VALID_MASK(3) to see if the corresponding extension
* AST is valid.
*
* |31 28|27 24|23 21|20|19 17|16|15 8|7 0|
* |-------------------------------------------------------------------------|
* | SW peer ID | VDEV ID | msg type |
* |-------------------------------------------------------------------------|
* | MAC addr 3 | MAC addr 2 | MAC addr 1 | MAC addr 0 |
* |-------------------------------------------------------------------------|
* | HW peer ID / AST index 0 | MAC addr 5 | MAC addr 4 |
* |-------------------------------------------------------------------------|
* | Reserved_21_31 |OA|ASTVM|NH| AST Hash Value |
* |-------------------------------------------------------------------------|
* | ASTFM3 | ASTFM2 | ASTFM1 | ASTFM0 | AST index 1 |
* |-------------------------------------------------------------------------|
* |TID valid low pri| TID valid hi pri | AST index 2 |
* |-------------------------------------------------------------------------|
* | LMAC/PMAC_RXPCU AST index | AST index 3 |
* |-------------------------------------------------------------------------|
* | Reserved_2 |
* |-------------------------------------------------------------------------|
* Where:
* NH = Next Hop
* ASTVM = AST valid mask
* OA = on-chip AST valid bit
* ASTFM = AST flow mask
*
* The following field definitions describe the format of the rx peer map v2
* messages sent from the target to the host.
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an rx peer map v2 message
* Value: peer map v2 -> 0x1e (HTT_T2H_MSG_TYPE_PEER_MAP_V2)
* - VDEV_ID
* Bits 15:8
* Purpose: Indicates which virtual device the peer is associated with.
* Value: vdev ID (used in the host to look up the vdev object)
* - SW_PEER_ID
* Bits 31:16
* Purpose: The peer ID (index) that WAL is allocating
* Value: (rx) peer ID
* - MAC_ADDR_L32
* Bits 31:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: lower 4 bytes of peer node's MAC address
* - MAC_ADDR_U16
* Bits 15:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: upper 2 bytes of peer node's MAC address
* - HW_PEER_ID / AST_INDEX_0
* Bits 31:16
* Purpose: Identifies the HW peer ID corresponding to the peer MAC
* address, so for rx frames marked for rx --> tx forwarding, the
* host can determine from the HW peer ID provided as meta-data with
* the rx frame which peer the frame is supposed to be forwarded to.
* Value: ID used by the MAC HW to identify the peer
* - AST_HASH_VALUE
* Bits 15:0
* Purpose: Indicates AST Hash value is required for the TCL AST index
* override feature.
* - NEXT_HOP
* Bit 16
* Purpose: Bit indicates that a next_hop AST entry is used for WDS
* (Wireless Distribution System).
* - AST_VALID_MASK
* Bits 19:17
* Purpose: Indicate if the AST 1 through AST 3 are valid
* - ONCHIP_AST_VALID_FLAG
* Bit 20
* Purpose: Indicate if the on-chip AST index field (ONCHIP_AST_IDX)
* is valid.
* - AST_INDEX_1
* Bits 15:0
* Purpose: indicate the second AST index for this peer
* - AST_0_FLOW_MASK
* Bits 19:16
* Purpose: identify the which flow the AST 0 entry corresponds to.
* - AST_1_FLOW_MASK
* Bits 23:20
* Purpose: identify the which flow the AST 1 entry corresponds to.
* - AST_2_FLOW_MASK
* Bits 27:24
* Purpose: identify the which flow the AST 2 entry corresponds to.
* - AST_3_FLOW_MASK
* Bits 31:28
* Purpose: identify the which flow the AST 3 entry corresponds to.
* - AST_INDEX_2
* Bits 15:0
* Purpose: indicate the third AST index for this peer
* - TID_VALID_HI_PRI
* Bits 23:16
* Purpose: identify if this peer's TIDs 0-7 support HI priority flow
* - TID_VALID_LOW_PRI
* Bits 31:24
* Purpose: identify if this peer's TIDs 0-7 support Low priority flow
* - AST_INDEX_3
* Bits 15:0
* Purpose: indicate the fourth AST index for this peer
* - ONCHIP_AST_IDX / RESERVED
* Bits 31:16
* Purpose: This field is valid only when split AST feature is enabled.
* The ONCHIP_AST_VALID_FLAG identifies whether this field is valid.
* If valid, identifies the HW peer ID corresponding to the peer MAC
* address, this ast_idx is used for LMAC modules for RXPCU.
* Value: ID used by the LMAC HW to identify the peer
*/
#define HTT_RX_PEER_MAP_V2_VDEV_ID_M 0xff00
#define HTT_RX_PEER_MAP_V2_VDEV_ID_S 8
#define HTT_RX_PEER_MAP_V2_SW_PEER_ID_M 0xffff0000
#define HTT_RX_PEER_MAP_V2_SW_PEER_ID_S 16
#define HTT_RX_PEER_MAP_V2_MAC_ADDR_L32_M 0xffffffff
#define HTT_RX_PEER_MAP_V2_MAC_ADDR_L32_S 0
#define HTT_RX_PEER_MAP_V2_MAC_ADDR_U16_M 0xffff
#define HTT_RX_PEER_MAP_V2_MAC_ADDR_U16_S 0
#define HTT_RX_PEER_MAP_V2_HW_PEER_ID_M 0xffff0000
#define HTT_RX_PEER_MAP_V2_HW_PEER_ID_S 16
#define HTT_RX_PEER_MAP_V2_AST_HASH_VALUE_M 0x0000ffff
#define HTT_RX_PEER_MAP_V2_AST_HASH_VALUE_S 0
#define HTT_RX_PEER_MAP_V2_NEXT_HOP_M 0x00010000
#define HTT_RX_PEER_MAP_V2_NEXT_HOP_S 16
#define HTT_RX_PEER_MAP_V2_AST_VALID_MASK_M 0x000e0000
#define HTT_RX_PEER_MAP_V2_AST_VALID_MASK_S 17
#define HTT_RX_PEER_MAP_V2_ONCHIP_AST_VALID_FLAG_M 0x00100000
#define HTT_RX_PEER_MAP_V2_ONCHIP_AST_VALID_FLAG_S 20
#define HTT_RX_PEER_MAP_V2_AST_INDEX_1_M 0xffff
#define HTT_RX_PEER_MAP_V2_AST_INDEX_1_S 0
#define HTT_RX_PEER_MAP_V2_AST_0_FLOW_MASK_M 0x000f0000
#define HTT_RX_PEER_MAP_V2_AST_0_FLOW_MASK_S 16
#define HTT_RX_PEER_MAP_V2_AST_1_FLOW_MASK_M 0x00f00000
#define HTT_RX_PEER_MAP_V2_AST_1_FLOW_MASK_S 20
#define HTT_RX_PEER_MAP_V2_AST_2_FLOW_MASK_M 0x0f000000
#define HTT_RX_PEER_MAP_V2_AST_2_FLOW_MASK_S 24
#define HTT_RX_PEER_MAP_V2_AST_3_FLOW_MASK_M 0xf0000000
#define HTT_RX_PEER_MAP_V2_AST_3_FLOW_MASK_S 28
#define HTT_RX_PEER_MAP_V2_AST_INDEX_2_M 0xffff
#define HTT_RX_PEER_MAP_V2_AST_INDEX_2_S 0
#define HTT_RX_PEER_MAP_V2_TID_VALID_HI_PRI_M 0x00ff0000
#define HTT_RX_PEER_MAP_V2_TID_VALID_HI_PRI_S 16
#define HTT_RX_PEER_MAP_V2_TID_VALID_LOW_PRI_M 0xff000000
#define HTT_RX_PEER_MAP_V2_TID_VALID_LOW_PRI_S 24
#define HTT_RX_PEER_MAP_V2_AST_INDEX_3_M 0xffff
#define HTT_RX_PEER_MAP_V2_AST_INDEX_3_S 0
#define HTT_RX_PEER_MAP_V2_ONCHIP_AST_HASH_VALUE_M 0xffff0000
#define HTT_RX_PEER_MAP_V2_ONCHIP_AST_HASH_VALUE_S 16
#define HTT_RX_PEER_MAP_V2_VDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_VDEV_ID, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_VDEV_ID_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_VDEV_ID_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_VDEV_ID_M) >> HTT_RX_PEER_MAP_V2_VDEV_ID_S)
#define HTT_RX_PEER_MAP_V2_SW_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_SW_PEER_ID, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_SW_PEER_ID_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_SW_PEER_ID_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_SW_PEER_ID_M) >> HTT_RX_PEER_MAP_V2_SW_PEER_ID_S)
#define HTT_RX_PEER_MAP_V2_HW_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_HW_PEER_ID, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_HW_PEER_ID_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_HW_PEER_ID_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_HW_PEER_ID_M) >> HTT_RX_PEER_MAP_V2_HW_PEER_ID_S)
#define HTT_RX_PEER_MAP_V2_AST_HASH_VALUE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_AST_HASH_VALUE, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_AST_HASH_VALUE_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_AST_HASH_VALUE_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_AST_HASH_VALUE_M) >> HTT_RX_PEER_MAP_V2_AST_HASH_VALUE_S)
#define HTT_RX_PEER_MAP_V2_ONCHIP_AST_HASH_VALUE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_ONCHIP_AST_HASH_VALUE_M, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_ONCHIP_AST_HASH_VALUE_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_ONCHIP_AST_HASH_VALUE_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_ONCHIP_AST_HASH_VALUE_M) >> HTT_RX_PEER_MAP_V2_ONCHIP_AST_HASH_VALUE_S)
#define HTT_RX_PEER_MAP_V2_NEXT_HOP_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_NEXT_HOP, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_NEXT_HOP_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_NEXT_HOP_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_NEXT_HOP_M) >> HTT_RX_PEER_MAP_V2_NEXT_HOP_S)
#define HTT_RX_PEER_MAP_V2_AST_VALID_MASK_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_AST_VALID_MASK, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_AST_VALID_MASK_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_AST_VALID_MASK_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_AST_VALID_MASK_M) >> HTT_RX_PEER_MAP_V2_AST_VALID_MASK_S)
#define HTT_RX_PEER_MAP_V2_ONCHIP_AST_VALID_FLAG_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_ONCHIP_AST_VALID_FLAG_M, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_ONCHIP_AST_VALID_FLAG_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_ONCHIP_AST_VALID_MASK_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_ONCHIP_AST_VALID_FLAG_M) >> HTT_RX_PEER_MAP_V2_ONCHIP_AST_VALID_FLAG_S)
#define HTT_RX_PEER_MAP_V2_AST_INDEX_1_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_AST_INDEX_1, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_AST_INDEX_1_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_AST_INDEX_1_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_AST_INDEX_1_M) >> HTT_RX_PEER_MAP_V2_AST_INDEX_1_S)
#define HTT_RX_PEER_MAP_V2_AST_0_FLOW_MASK_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_AST_0_FLOW_MASK, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_AST_0_FLOW_MASK_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_AST_0_FLOW_MASK_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_AST_0_FLOW_MASK_M) >> HTT_RX_PEER_MAP_V2_AST_0_FLOW_MASK_S)
#define HTT_RX_PEER_MAP_V2_AST_1_FLOW_MASK_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_AST_1_FLOW_MASK, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_AST_1_FLOW_MASK_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_AST_1_FLOW_MASK_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_AST_1_FLOW_MASK_M) >> HTT_RX_PEER_MAP_V2_AST_1_FLOW_MASK_S)
#define HTT_RX_PEER_MAP_V2_AST_2_FLOW_MASK_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_AST_2_FLOW_MASK, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_AST_2_FLOW_MASK_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_AST_2_FLOW_MASK_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_AST_2_FLOW_MASK_M) >> HTT_RX_PEER_MAP_V2_AST_2_FLOW_MASK_S)
#define HTT_RX_PEER_MAP_V2_AST_3_FLOW_MASK_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_AST_3_FLOW_MASK, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_AST_3_FLOW_MASK_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_AST_3_FLOW_MASK_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_AST_3_FLOW_MASK_M) >> HTT_RX_PEER_MAP_V2_AST_3_FLOW_MASK_S)
#define HTT_RX_PEER_MAP_V2_AST_INDEX_2_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_AST_INDEX_2, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_AST_INDEX_2_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_AST_INDEX_2_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_AST_INDEX_2_M) >> HTT_RX_PEER_MAP_V2_AST_INDEX_2_S)
#define HTT_RX_PEER_MAP_V2_TID_VALID_HI_PRI_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_TID_VALID_HI_PRI, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_TID_VALID_HI_PRI_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_TID_VALID_HI_PRI_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_TID_VALID_HI_PRI_M) >> HTT_RX_PEER_MAP_V2_TID_VALID_HI_PRI_S)
#define HTT_RX_PEER_MAP_V2_TID_VALID_LOW_PRI_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_TID_VALID_LOW_PRI, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_TID_VALID_LOW_PRI_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_TID_VALID_LOW_PRI_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_TID_VALID_LOW_PRI_M) >> HTT_RX_PEER_MAP_V2_TID_VALID_LOW_PRI_S)
#define HTT_RX_PEER_MAP_V2_AST_INDEX_3_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V2_AST_INDEX_3, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V2_AST_INDEX_3_S; \
} while (0)
#define HTT_RX_PEER_MAP_V2_AST_INDEX_3_GET(word) \
(((word) & HTT_RX_PEER_MAP_V2_AST_INDEX_3_M) >> HTT_RX_PEER_MAP_V2_AST_INDEX_3_S)
#define HTT_RX_PEER_MAP_V2_MAC_ADDR_OFFSET 4 /* bytes */
#define HTT_RX_PEER_MAP_V2_HW_PEER_ID_OFFSET 8 /* bytes */
#define HTT_RX_PEER_MAP_V2_AST_HASH_INDEX_OFFSET 12 /* bytes */
#define HTT_RX_PEER_MAP_V2_NEXT_HOP_OFFSET 12 /* bytes */
#define HTT_RX_PEER_MAP_V2_AST_VALID_MASK_OFFSET 12 /* bytes */
#define HTT_RX_PEER_MAP_V2_AST_INDEX_1_OFFSET 16 /* bytes */
#define HTT_RX_PEER_MAP_V2_AST_X_FLOW_MASK_OFFSET 16 /* bytes */
#define HTT_RX_PEER_MAP_V2_AST_INDEX_2_OFFSET 20 /* bytes */
#define HTT_RX_PEER_MAP_V2_TID_VALID_LO_PRI_OFFSET 20 /* bytes */
#define HTT_RX_PEER_MAP_V2_TID_VALID_HI_PRI_OFFSET 20 /* bytes */
#define HTT_RX_PEER_MAP_V2_AST_INDEX_3_OFFSET 24 /* bytes */
#define HTT_RX_PEER_MAP_V2_BYTES 32
/**
* @brief target -> host rx peer map V3 message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_PEER_MAP_V3
*
* @details
* The following diagram shows the format of the rx peer map v3 message sent
* from the target to the host.
* Format inherits HTT_T2H_MSG_TYPE_PEER_MAP_V2 published above
* This layout assumes the target operates as little-endian.
*
* |31 24|23 20|19|18|17|16|15 8|7 0|
* |-----------------+--------+--+--+--+--+-----------------+-----------------|
* | SW peer ID | VDEV ID | msg type |
* |-----------------+--------------------+-----------------+-----------------|
* | MAC addr 3 | MAC addr 2 | MAC addr 1 | MAC addr 0 |
* |-----------------+--------------------+-----------------+-----------------|
* | Multicast SW peer ID | MAC addr 5 | MAC addr 4 |
* |-----------------+--------+-----------+-----------------+-----------------|
* | HTT_MSDU_IDX_ |RESERVED| CACHE_ | |
* | VALID_MASK |(4bits) | SET_NUM | HW peer ID / AST index |
* | (8bits) | | (4bits) | |
* |-----------------+--------+--+--+--+--------------------------------------|
* | RESERVED |E |O | | |
* | (13bits) |A |A |NH| on-Chip PMAC_RXPCU AST index |
* | |V |V | | |
* |-----------------+--------------------+-----------------------------------|
* | HTT_MSDU_IDX_ | RESERVED | |
* | VALID_MASK_EXT | (8bits) | EXT AST index |
* | (8bits) | | |
* |-----------------+--------------------+-----------------------------------|
* | Reserved_2 |
* |--------------------------------------------------------------------------|
* | Reserved_3 |
* |--------------------------------------------------------------------------|
*
* Where:
* EAV = EXT_AST_VALID flag, for "EXT AST index"
* OAV = ONCHIP_AST_VALID flag, for "on-Chip PMAC_RXPCU AST index"
* NH = Next Hop
* The following field definitions describe the format of the rx peer map v3
* messages sent from the target to the host.
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a peer map v3 message
* Value: 0x2b (HTT_T2H_MSG_TYPE_PEER_MAP_V3)
* - VDEV_ID
* Bits 15:8
* Purpose: Indicates which virtual device the peer is associated with.
* - SW_PEER_ID
* Bits 31:16
* Purpose: The peer ID (index) that WAL has allocated for this peer.
* - MAC_ADDR_L32
* Bits 31:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: lower 4 bytes of peer node's MAC address
* - MAC_ADDR_U16
* Bits 15:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: upper 2 bytes of peer node's MAC address
* - MULTICAST_SW_PEER_ID
* Bits 31:16
* Purpose: The multicast peer ID (index)
* Value: set to HTT_INVALID_PEER if not valid
* - HW_PEER_ID / AST_INDEX
* Bits 15:0
* Purpose: Identifies the HW peer ID corresponding to the peer MAC
* address, so for rx frames marked for rx --> tx forwarding, the
* host can determine from the HW peer ID provided as meta-data with
* the rx frame which peer the frame is supposed to be forwarded to.
* - CACHE_SET_NUM
* Bits 19:16
* Purpose: Cache Set Number for AST_INDEX
* Cache set number that should be used to cache the index based
* search results, for address and flow search.
* This value should be equal to LSB 4 bits of the hash value
* of match data, in case of search index points to an entry which
* may be used in content based search also. The value can be
* anything when the entry pointed by search index will not be
* used for content based search.
* - HTT_MSDU_IDX_VALID_MASK
* Bits 31:24
* Purpose: Shows MSDU indexes valid mask for AST_INDEX
* - ONCHIP_AST_IDX / RESERVED
* Bits 15:0
* Purpose: This field is valid only when split AST feature is enabled.
* The ONCHIP_AST_VALID flag identifies whether this field is valid.
* If valid, identifies the HW peer ID corresponding to the peer MAC
* address, this ast_idx is used for LMAC modules for RXPCU.
* - NEXT_HOP
* Bits 16
* Purpose: Flag indicates next_hop AST entry used for WDS
* (Wireless Distribution System).
* - ONCHIP_AST_VALID
* Bits 17
* Purpose: Flag indicates valid data behind of the ONCHIP_AST_IDX field
* - EXT_AST_VALID
* Bits 18
* Purpose: Flag indicates valid data behind of the EXT_AST_INDEX field
* - EXT_AST_INDEX
* Bits 15:0
* Purpose: This field describes Extended AST index
* Valid if EXT_AST_VALID flag set
* - HTT_MSDU_IDX_VALID_MASK_EXT
* Bits 31:24
* Purpose: Shows MSDU indexes valid mask for EXT_AST_INDEX
*/
/* dword 0 */
#define HTT_RX_PEER_MAP_V3_SW_PEER_ID_M 0xffff0000
#define HTT_RX_PEER_MAP_V3_SW_PEER_ID_S 16
#define HTT_RX_PEER_MAP_V3_VDEV_ID_M 0x0000ff00
#define HTT_RX_PEER_MAP_V3_VDEV_ID_S 8
/* dword 1 */
#define HTT_RX_PEER_MAP_V3_MAC_ADDR_L32_M 0xffffffff
#define HTT_RX_PEER_MAP_V3_MAC_ADDR_L32_S 0
/* dword 2 */
#define HTT_RX_PEER_MAP_V3_MAC_ADDR_U16_M 0x0000ffff
#define HTT_RX_PEER_MAP_V3_MAC_ADDR_U16_S 0
#define HTT_RX_PEER_MAP_V3_MULTICAST_SW_PEER_ID_M 0xffff0000
#define HTT_RX_PEER_MAP_V3_MULTICAST_SW_PEER_ID_S 16
/* dword 3 */
#define HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_AST_M 0xff000000
#define HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_AST_S 24
#define HTT_RX_PEER_MAP_V3_CACHE_SET_NUM_M 0x000f0000
#define HTT_RX_PEER_MAP_V3_CACHE_SET_NUM_S 16
#define HTT_RX_PEER_MAP_V3_HW_PEER_ID_M 0x0000ffff
#define HTT_RX_PEER_MAP_V3_HW_PEER_ID_S 0
/* dword 4 */
#define HTT_RX_PEER_MAP_V3_EXT_AST_VALID_FLAG_M 0x00040000
#define HTT_RX_PEER_MAP_V3_EXT_AST_VALID_FLAG_S 18
#define HTT_RX_PEER_MAP_V3_ONCHIP_AST_VALID_FLAG_M 0x00020000
#define HTT_RX_PEER_MAP_V3_ONCHIP_AST_VALID_FLAG_S 17
#define HTT_RX_PEER_MAP_V3_NEXT_HOP_M 0x00010000
#define HTT_RX_PEER_MAP_V3_NEXT_HOP_S 16
#define HTT_RX_PEER_MAP_V3_ON_CHIP_PMAC_RXPCU_AST_IDX_M 0x0000ffff
#define HTT_RX_PEER_MAP_V3_ON_CHIP_PMAC_RXPCU_AST_IDX_S 0
/* dword 5 */
#define HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_EXT_AST_M 0xff000000
#define HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_EXT_AST_S 24
#define HTT_RX_PEER_MAP_V3_EXT_AST_IDX_M 0x0000ffff
#define HTT_RX_PEER_MAP_V3_EXT_AST_IDX_S 0
#define HTT_RX_PEER_MAP_V3_VDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V3_VDEV_ID, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V3_VDEV_ID_S; \
} while (0)
#define HTT_RX_PEER_MAP_V3_VDEV_ID_GET(word) \
(((word) & HTT_RX_PEER_MAP_V3_VDEV_ID_M) >> HTT_RX_PEER_MAP_V3_VDEV_ID_S)
#define HTT_RX_PEER_MAP_V3_SW_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V3_SW_PEER_ID, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V3_SW_PEER_ID_S; \
} while (0)
#define HTT_RX_PEER_MAP_V3_SW_PEER_ID_GET(word) \
(((word) & HTT_RX_PEER_MAP_V3_SW_PEER_ID_M) >> HTT_RX_PEER_MAP_V3_SW_PEER_ID_S)
#define HTT_RX_PEER_MAP_V3_MULTICAST_SW_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V3_MULTICAST_SW_PEER_ID, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V3_MULTICAST_SW_PEER_ID_S; \
} while (0)
#define HTT_RX_PEER_MAP_V3_MULTICAST_SW_PEER_ID_GET(word) \
(((word) & HTT_RX_PEER_MAP_V3_MULTICAST_SW_PEER_ID_M) >> HTT_RX_PEER_MAP_V3_MULTICAST_SW_PEER_ID_S)
#define HTT_RX_PEER_MAP_V3_HW_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V3_HW_PEER_ID, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V3_HW_PEER_ID_S; \
} while (0)
#define HTT_RX_PEER_MAP_V3_HW_PEER_ID_GET(word) \
(((word) & HTT_RX_PEER_MAP_V3_HW_PEER_ID_M) >> HTT_RX_PEER_MAP_V3_HW_PEER_ID_S)
#define HTT_RX_PEER_MAP_V3_CACHE_SET_NUM_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V3_CACHE_SET_NUM, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V3_CACHE_SET_NUM_S; \
} while (0)
#define HTT_RX_PEER_MAP_V3_CACHE_SET_NUM_GET(word) \
(((word) & HTT_RX_PEER_MAP_V3_CACHE_SET_NUM_M) >> HTT_RX_PEER_MAP_V3_CACHE_SET_NUM_S)
#define HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_AST_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_AST, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_AST_S; \
} while (0)
#define HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_AST_GET(word) \
(((word) & HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_AST_M) >> HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_AST_S)
#define HTT_RX_PEER_MAP_V3_ON_CHIP_PMAC_RXPCU_AST_IDX_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V3_ON_CHIP_PMAC_RXPCU_AST_IDX, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V3_ON_CHIP_PMAC_RXPCU_AST_IDX_S; \
} while (0)
#define HTT_RX_PEER_MAP_V3_ON_CHIP_PMAC_RXPCU_AST_IDX_GET(word) \
(((word) & HTT_RX_PEER_MAP_V3_ON_CHIP_PMAC_RXPCU_AST_IDX_M) >> HTT_RX_PEER_MAP_V3_ON_CHIP_PMAC_RXPCU_AST_IDX_S)
#define HTT_RX_PEER_MAP_V3_NEXT_HOP_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V3_NEXT_HOP, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V3_NEXT_HOP_S; \
} while (0)
#define HTT_RX_PEER_MAP_V3_NEXT_HOP_GET(word) \
(((word) & HTT_RX_PEER_MAP_V3_NEXT_HOP_M) >> HTT_RX_PEER_MAP_V3_NEXT_HOP_S)
#define HTT_RX_PEER_MAP_V3_ONCHIP_AST_VALID_FLAG_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V3_ONCHIP_AST_VALID_FLAG, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V3_ONCHIP_AST_VALID_FLAG_S; \
} while (0)
#define HTT_RX_PEER_MAP_V3_ONCHIP_AST_VALID_FLAG_GET(word) \
(((word) & HTT_RX_PEER_MAP_V3_ONCHIP_AST_VALID_FLAG_M) >> HTT_RX_PEER_MAP_V3_ONCHIP_AST_VALID_FLAG_S)
#define HTT_RX_PEER_MAP_V3_EXT_AST_VALID_FLAG_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V3_EXT_AST_VALID_FLAG, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V3_EXT_AST_VALID_FLAG_S; \
} while (0)
#define HTT_RX_PEER_MAP_V3_EXT_AST_VALID_FLAG_GET(word) \
(((word) & HTT_RX_PEER_MAP_V3_EXT_AST_VALID_FLAG_M) >> HTT_RX_PEER_MAP_V3_EXT_AST_VALID_FLAG_S)
#define HTT_RX_PEER_MAP_V3_EXT_AST_IDX_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V3_EXT_AST_IDX, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V3_EXT_AST_IDX_S; \
} while (0)
#define HTT_RX_PEER_MAP_V3_EXT_AST_IDX_GET(word) \
(((word) & HTT_RX_PEER_MAP_V3_EXT_AST_IDX_M) >> HTT_RX_PEER_MAP_V3_EXT_AST_IDX_S)
#define HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_EXT_AST_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_EXT_AST, value); \
(word) |= (value) << HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_EXT_AST_S; \
} while (0)
#define HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_EXT_AST_GET(word) \
(((word) & HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_EXT_AST_M) >> HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_EXT_AST_S)
#define HTT_RX_PEER_MAP_V3_MAC_ADDR_OFFSET 4 /* bytes */
#define HTT_RX_PEER_MAP_V3_MULTICAST_SW_PEER_ID_OFFSET 8 /* bytes */
#define HTT_RX_PEER_MAP_V3_HW_PEER_ID_OFFSET 12 /* bytes */
#define HTT_RX_PEER_MAP_V3_CACHE_SET_NUM_OFFSET 12 /* bytes */
#define HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_AST_OFFSET 12 /* bytes */
#define HTT_RX_PEER_MAP_V3_ON_CHIP_PMAC_RXPCU_AST_IDX_OFFSET 16 /* bytes */
#define HTT_RX_PEER_MAP_V3_NEXT_HOP_OFFSET 16 /* bytes */
#define HTT_RX_PEER_MAP_V3_ONCHIP_AST_VALID_FLAG_OFFSET 16 /* bytes */
#define HTT_RX_PEER_MAP_V3_EXT_AST_VALID_FLAG_OFFSET 16 /* bytes */
#define HTT_RX_PEER_MAP_V3_EXT_AST_IDX_OFFSET 20 /* bytes */
#define HTT_RX_PEER_MAP_V3_MSDU_IDX_VM_EXT_AST_OFFSET 20 /* bytes */
#define HTT_RX_PEER_MAP_V3_BYTES 32
/**
* @brief target -> host rx peer unmap V2 message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_PEER_UNMAP_V2
*
* The following diagram shows the format of the rx peer unmap message sent
* from the target to the host.
*
* |31 24|23 16|15 8|7 0|
* |-----------------------------------------------------------------------|
* | SW peer ID | VDEV ID | msg type |
* |-----------------------------------------------------------------------|
* | MAC addr 3 | MAC addr 2 | MAC addr 1 | MAC addr 0 |
* |-----------------------------------------------------------------------|
* | Reserved_17_31 | Next Hop | MAC addr 5 | MAC addr 4 |
* |-----------------------------------------------------------------------|
* | Peer Delete Duration |
* |-----------------------------------------------------------------------|
* | Reserved_0 | WDS Free Count |
* |-----------------------------------------------------------------------|
* | Reserved_1 |
* |-----------------------------------------------------------------------|
* | Reserved_2 |
* |-----------------------------------------------------------------------|
*
*
* The following field definitions describe the format of the rx peer unmap
* messages sent from the target to the host.
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an rx peer unmap v2 message
* Value: peer unmap v2 -> 0x1f (HTT_T2H_MSG_TYPE_PEER_UNMAP_V2)
* - VDEV_ID
* Bits 15:8
* Purpose: Indicates which virtual device the peer is associated
* with.
* Value: vdev ID (used in the host to look up the vdev object)
* - SW_PEER_ID
* Bits 31:16
* Purpose: The peer ID (index) that WAL is freeing
* Value: (rx) peer ID
* - MAC_ADDR_L32
* Bits 31:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: lower 4 bytes of peer node's MAC address
* - MAC_ADDR_U16
* Bits 15:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: upper 2 bytes of peer node's MAC address
* - NEXT_HOP
* Bits 16
* Purpose: Bit indicates next_hop AST entry used for WDS
* (Wireless Distribution System).
* - PEER_DELETE_DURATION
* Bits 31:0
* Purpose: Time taken to delete peer, in msec,
* Used for monitoring / debugging PEER delete response delay
* - PEER_WDS_FREE_COUNT
* Bits 15:0
* Purpose: Count of WDS entries deleted associated to peer deleted
*/
#define HTT_RX_PEER_UNMAP_V2_VDEV_ID_M HTT_RX_PEER_MAP_V2_VDEV_ID_M
#define HTT_RX_PEER_UNMAP_V2_VDEV_ID_S HTT_RX_PEER_MAP_V2_VDEV_ID_S
#define HTT_RX_PEER_UNMAP_V2_SW_PEER_ID_M HTT_RX_PEER_MAP_V2_SW_PEER_ID_M
#define HTT_RX_PEER_UNMAP_V2_SW_PEER_ID_S HTT_RX_PEER_MAP_V2_SW_PEER_ID_S
#define HTT_RX_PEER_UNMAP_V2_MAC_ADDR_L32_M HTT_RX_PEER_MAP_V2_MAC_ADDR_L32_M
#define HTT_RX_PEER_UNMAP_V2_MAC_ADDR_L32_S HTT_RX_PEER_MAP_V2_MAC_ADDR_L32_S
#define HTT_RX_PEER_UNMAP_V2_MAC_ADDR_U16_M HTT_RX_PEER_MAP_V2_MAC_ADDR_U16_M
#define HTT_RX_PEER_UNMAP_V2_MAC_ADDR_U16_S HTT_RX_PEER_MAP_V2_MAC_ADDR_U16_S
#define HTT_RX_PEER_UNMAP_V2_NEXT_HOP_M HTT_RX_PEER_MAP_V2_NEXT_HOP_M
#define HTT_RX_PEER_UNMAP_V2_NEXT_HOP_S HTT_RX_PEER_MAP_V2_NEXT_HOP_S
#define HTT_RX_PEER_UNMAP_V2_PEER_DELETE_DURATION_M 0xffffffff
#define HTT_RX_PEER_UNMAP_V2_PEER_DELETE_DURATION_S 0
#define HTT_RX_PEER_UNMAP_V2_PEER_WDS_FREE_COUNT_M 0x0000ffff
#define HTT_RX_PEER_UNMAP_V2_PEER_WDS_FREE_COUNT_S 0
#define HTT_RX_PEER_UNMAP_V2_VDEV_ID_SET HTT_RX_PEER_MAP_V2_VDEV_ID_SET
#define HTT_RX_PEER_UNMAP_V2_VDEV_ID_GET HTT_RX_PEER_MAP_V2_VDEV_ID_GET
#define HTT_RX_PEER_UNMAP_V2_SW_PEER_ID_SET HTT_RX_PEER_MAP_V2_SW_PEER_ID_SET
#define HTT_RX_PEER_UNMAP_V2_SW_PEER_ID_GET HTT_RX_PEER_MAP_V2_SW_PEER_ID_GET
#define HTT_RX_PEER_UNMAP_V2_NEXT_HOP_SET HTT_RX_PEER_MAP_V2_NEXT_HOP_SET
#define HTT_RX_PEER_UNMAP_V2_NEXT_HOP_GET HTT_RX_PEER_MAP_V2_NEXT_HOP_GET
#define HTT_RX_PEER_UNMAP_V2_PEER_DELETE_DURATION_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_UNMAP_V2_PEER_DELETE_DURATION, value); \
(word) |= (value) << HTT_RX_PEER_UNMAP_V2_PEER_DELETE_DURATION_S; \
} while (0)
#define HTT_RX_PEER_UNMAP_V2_PEER_DELETE_DURATION_GET(word) \
(((word) & HTT_RX_PEER_UNMAP_V2_PEER_DELETE_DURATION_M) >> HTT_RX_PEER_UNMAP_V2_PEER_DELETE_DURATION_S)
#define HTT_RX_PEER_UNMAP_V2_PEER_WDS_FREE_COUNT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_UNMAP_V2_PEER_WDS_FREE_COUNT, value); \
(word) |= (value) << HTT_RX_PEER_UNMAP_V2_PEER_WDS_FREE_COUNT_S; \
} while (0)
#define HTT_RX_PEER_UNMAP_V2_PEER_WDS_FREE_COUNT_GET(word) \
(((word) & HTT_RX_PEER_UNMAP_V2_PEER_WDS_FREE_COUNT_M) >> HTT_RX_PEER_UNMAP_V2_PEER_WDS_FREE_COUNT_S)
#define HTT_RX_PEER_UNMAP_V2_MAC_ADDR_OFFSET 4 /* bytes */
#define HTT_RX_PEER_UNMAP_V2_NEXT_HOP_OFFSET 8 /* bytes */
#define HTT_RX_PEER_UNMAP_V2_PEER_DELETE_DURATION_OFFSET 12 /* bytes */
#define HTT_RX_PEER_UNMAP_V2_PEER_WDS_FREE_COUNT_OFFSET 16 /* bytes */
#define HTT_RX_PEER_UNMAP_V2_BYTES 28
/**
* @brief target -> host rx peer mlo map message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP
*
* @details
* The following diagram shows the format of the rx mlo peer map message sent
* from the target to the host. This layout assumes the target operates
* as little-endian.
*
* MCC:
* One HTT_MLO_PEER_MAP is sent after PEER_ASSOC received on first LINK for both STA and SAP.
*
* WIN:
* One HTT_MLO_PEER_MAP is sent after peers are created on all the links for both AP and STA.
* It will be sent on the Assoc Link.
*
* This message always contains a MLO peer ID. The main purpose of the
* MLO peer ID is to tell the host what peer ID rx packets will be tagged
* with, so that the host can use that MLO peer ID to determine which peer
* transmitted the rx frame.
*
* |31 |29 27|26 24|23 20|19 17|16|15 8|7 0|
* |-------------------------------------------------------------------------|
* |RSVD | PRC |NUMLINK| MLO peer ID | msg type |
* |-------------------------------------------------------------------------|
* | MAC addr 3 | MAC addr 2 | MAC addr 1 | MAC addr 0 |
* |-------------------------------------------------------------------------|
* | RSVD_16_31 | MAC addr 5 | MAC addr 4 |
* |-------------------------------------------------------------------------|
* |CACHE_SET_NUM| TIDMASK |CHIPID|V| Primary TCL AST IDX 0 |
* |-------------------------------------------------------------------------|
* |CACHE_SET_NUM| TIDMASK |CHIPID|V| Primary TCL AST IDX 1 |
* |-------------------------------------------------------------------------|
* |CACHE_SET_NUM| TIDMASK |CHIPID|V| Primary TCL AST IDX 2 |
* |-------------------------------------------------------------------------|
* |RSVD |
* |-------------------------------------------------------------------------|
* |RSVD |
* |-------------------------------------------------------------------------|
* | htt_tlv_hdr_t |
* |-------------------------------------------------------------------------|
* |RSVD_27_31 |CHIPID| VDEVID | SW peer ID |
* |-------------------------------------------------------------------------|
* | htt_tlv_hdr_t |
* |-------------------------------------------------------------------------|
* |RSVD_27_31 |CHIPID| VDEVID | SW peer ID |
* |-------------------------------------------------------------------------|
* | htt_tlv_hdr_t |
* |-------------------------------------------------------------------------|
* |RSVD_27_31 |CHIPID| VDEVID | SW peer ID |
* |-------------------------------------------------------------------------|
*
* Where:
* PRC - Primary REO CHIPID - 3 Bits Bit24,25,26
* NUMLINK - NUM_LOGICAL_LINKS - 3 Bits Bit27,28,29
* V (valid) - 1 Bit Bit17
* CHIPID - 3 Bits
* TIDMASK - 8 Bits
* CACHE_SET_NUM - 8 Bits
*
* The following field definitions describe the format of the rx MLO peer map
* messages sent from the target to the host.
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an rx mlo peer map message
* Value: 0x29 (HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP)
*
* - MLO_PEER_ID
* Bits 23:8
* Purpose: The MLO peer ID (index).
* For MCC, FW will allocate it. For WIN, Host will allocate it.
* Value: MLO peer ID
*
* - NUMLINK
* Bits: 26:24 (3Bits)
* Purpose: Indicate the max number of logical links supported per client.
* Value: number of logical links
*
* - PRC
* Bits: 29:27 (3Bits)
* Purpose: Indicate the Primary REO CHIPID. The ID can be used to indicate
* if there is migration of the primary chip.
* Value: Primary REO CHIPID
*
* - MAC_ADDR_L32
* Bits 31:0
* Purpose: Identifies which mlo peer node the mlo peer ID is for.
* Value: lower 4 bytes of peer node's MAC address
*
* - MAC_ADDR_U16
* Bits 15:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: upper 2 bytes of peer node's MAC address
*
* - PRIMARY_TCL_AST_IDX
* Bits 15:0
* Purpose: Primary TCL AST index for this peer.
*
* - V
* 1 Bit Position 16
* Purpose: If the ast idx is valid.
*
* - CHIPID
* Bits 19:17
* Purpose: Identifies which chip id of PRIMARY_TCL_AST_IDX
*
* - TIDMASK
* Bits 27:20
* Purpose: LINK to TID mapping for PRIMARY_TCL_AST_IDX
*
* - CACHE_SET_NUM
* Bits 31:28
* Purpose: Cache Set Number for PRIMARY_TCL_AST_IDX
* Cache set number that should be used to cache the index based
* search results, for address and flow search.
* This value should be equal to LSB four bits of the hash value
* of match data, in case of search index points to an entry which
* may be used in content based search also. The value can be
* anything when the entry pointed by search index will not be
* used for content based search.
*
* - htt_tlv_hdr_t
* Purpose: Provide link specific chip,vdev and sw_peer IDs
*
* Bits 11:0
* Purpose: tag equal to MLO_PEER_MAP_TLV_STRUCT_SOC_VDEV_PEER_IDS.
*
* Bits 23:12
* Purpose: Length, Length of the value that follows the header
*
* Bits 31:28
* Purpose: Reserved.
*
*
* - SW_PEER_ID
* Bits 15:0
* Purpose: The peer ID (index) that WAL is allocating
* Value: (rx) peer ID
*
* - VDEV_ID
* Bits 23:16
* Purpose: Indicates which virtual device the peer is associated with.
* Value: vdev ID (used in the host to look up the vdev object)
*
* - CHIPID
* Bits 26:24
* Purpose: Indicates which Chip id the peer is associated with.
* Value: chip ID (Provided by Host as part of QMI exchange)
*/
typedef enum {
MLO_PEER_MAP_TLV_STRUCT_SOC_VDEV_PEER_IDS,
} MLO_PEER_MAP_TLV_TAG_ID;
#define HTT_RX_MLO_PEER_MAP_MLO_PEER_ID_M 0x00ffff00
#define HTT_RX_MLO_PEER_MAP_MLO_PEER_ID_S 8
#define HTT_RX_MLO_PEER_MAP_NUM_LOGICAL_LINKS_M 0x07000000
#define HTT_RX_MLO_PEER_MAP_NUM_LOGICAL_LINKS_S 24
#define HTT_RX_MLO_PEER_PRIMARY_REO_CHIP_ID_M 0x38000000
#define HTT_RX_MLO_PEER_PRIMARY_REO_CHIP_ID_S 27
#define HTT_RX_MLO_PEER_MAP_MAC_ADDR_L32_M 0xffffffff
#define HTT_RX_MLO_PEER_MAP_MAC_ADDR_L32_S 0
#define HTT_RX_MLO_PEER_MAP_MAC_ADDR_U16_M 0x0000ffff
#define HTT_RX_MLO_PEER_MAP_MAC_ADDR_U16_S 0
#define HTT_RX_MLO_PEER_MAP_PRIMARY_AST_INDEX_M 0x0000ffff
#define HTT_RX_MLO_PEER_MAP_PRIMARY_AST_INDEX_S 0
#define HTT_RX_MLO_PEER_MAP_AST_INDEX_VALID_FLAG_M 0x00010000
#define HTT_RX_MLO_PEER_MAP_AST_INDEX_VALID_FLAG_S 16
#define HTT_RX_MLO_PEER_MAP_CHIP_ID_AST_INDEX_M 0x000E0000
#define HTT_RX_MLO_PEER_MAP_CHIP_ID_AST_INDEX_S 17
#define HTT_RX_MLO_PEER_MAP_TIDMASK_AST_INDEX_M 0x00F00000
#define HTT_RX_MLO_PEER_MAP_TIDMASK_AST_INDEX_S 20
#define HTT_RX_MLO_PEER_MAP_CACHE_SET_NUM_AST_INDEX_M 0xF0000000
#define HTT_RX_MLO_PEER_MAP_CACHE_SET_NUM_AST_INDEX_S 28
#define HTT_RX_MLO_PEER_MAP_TLV_TAG_M 0x00000fff
#define HTT_RX_MLO_PEER_MAP_TLV_TAG_S 0
#define HTT_RX_MLO_PEER_MAP_TLV_LENGTH_M 0x00fff000
#define HTT_RX_MLO_PEER_MAP_TLV_LENGTH_S 12
#define HTT_RX_MLO_PEER_MAP_SW_PEER_ID_M 0x0000ffff
#define HTT_RX_MLO_PEER_MAP_SW_PEER_ID_S 0
#define HTT_RX_MLO_PEER_MAP_VDEV_ID_M 0x00ff0000
#define HTT_RX_MLO_PEER_MAP_VDEV_ID_S 16
#define HTT_RX_MLO_PEER_MAP_CHIP_ID_M 0x07000000
#define HTT_RX_MLO_PEER_MAP_CHIP_ID_S 24
#define HTT_RX_MLO_PEER_MAP_MLO_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_MAP_MLO_PEER_ID, value); \
(word) |= (value) << HTT_RX_MLO_PEER_MAP_MLO_PEER_ID_S; \
} while (0)
#define HTT_RX_MLO_PEER_MAP_MLO_PEER_ID_GET(word) \
(((word) & HTT_RX_MLO_PEER_MAP_MLO_PEER_ID_M) >> HTT_RX_MLO_PEER_MAP_MLO_PEER_ID_S)
#define HTT_RX_MLO_PEER_MAP_NUM_LOGICAL_LINKS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_MAP_NUM_LOGICAL_LINKS, value); \
(word) |= (value) << HTT_RX_MLO_PEER_MAP_NUM_LOGICAL_LINKS_S; \
} while (0)
#define HTT_RX_MLO_PEER_MAP_NUM_LOGICAL_LINKS_GET(word) \
(((word) & HTT_RX_MLO_PEER_MAP_NUM_LOGICAL_LINKS_M) >> HTT_RX_MLO_PEER_MAP_NUM_LOGICAL_LINKS_S)
#define HTT_RX_MLO_PEER_PRIMARY_REO_CHIP_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_PRIMARY_REO_CHIP_ID, value); \
(word) |= (value) << HTT_RX_MLO_PEER_PRIMARY_REO_CHIP_ID_S; \
} while (0)
#define HTT_RX_MLO_PEER_PRIMARY_REO_CHIP_ID_GET(word) \
(((word) & HTT_RX_MLO_PEER_PRIMARY_REO_CHIP_ID_M) >> HTT_RX_MLO_PEER_PRIMARY_REO_CHIP_ID_S)
#define HTT_RX_MLO_PEER_MAP_PRIMARY_AST_INDEX_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_MAP_PRIMARY_AST_INDEX, value); \
(word) |= (value) << HTT_RX_MLO_PEER_MAP_PRIMARY_AST_INDEX_S; \
} while (0)
#define HTT_RX_MLO_PEER_MAP_PRIMARY_AST_INDEX_GET(word) \
(((word) & HTT_RX_MLO_PEER_MAP_PRIMARY_AST_INDEX_M) >> HTT_RX_MLO_PEER_MAP_PRIMARY_AST_INDEX_S)
#define HTT_RX_MLO_PEER_MAP_AST_INDEX_VALID_FLAG_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_MAP_AST_INDEX_VALID_FLAG, value); \
(word) |= (value) << HTT_RX_MLO_PEER_MAP_AST_INDEX_VALID_FLAG_S; \
} while (0)
#define HTT_RX_MLO_PEER_MAP_AST_INDEX_VALID_FLAG_GET(word) \
(((word) & HTT_RX_MLO_PEER_MAP_AST_INDEX_VALID_FLAG_M) >> HTT_RX_MLO_PEER_MAP_AST_INDEX_VALID_FLAG_S)
#define HTT_RX_MLO_PEER_MAP_CHIP_ID_AST_INDEX_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_MAP_CHIP_ID_AST_INDEX, value); \
(word) |= (value) << HTT_RX_MLO_PEER_MAP_CHIP_ID_AST_INDEX_S; \
} while (0)
#define HTT_RX_MLO_PEER_MAP_CHIP_ID_AST_INDEX_GET(word) \
(((word) & HTT_RX_MLO_PEER_MAP_CHIP_ID_AST_INDEX_M) >> HTT_RX_MLO_PEER_MAP_CHIP_ID_AST_INDEX_S)
#define HTT_RX_MLO_PEER_MAP_TIDMASK_AST_INDEX_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_MAP_TIDMASK_AST_INDEX, value); \
(word) |= (value) << HTT_RX_MLO_PEER_MAP_TIDMASK_AST_INDEX_S; \
} while (0)
#define HTT_RX_MLO_PEER_MAP_TIDMASK_AST_INDEX_GET(word) \
(((word) & HTT_RX_MLO_PEER_MAP_TIDMASK_AST_INDEX_M) >> HTT_RX_MLO_PEER_MAP_TIDMASK_AST_INDEX_S)
#define HTT_RX_MLO_PEER_MAP_CACHE_SET_NUM_AST_INDEX_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_MAP_CACHE_SET_NUM_AST_INDEX, value); \
(word) |= (value) << HTT_RX_MLO_PEER_MAP_CACHE_SET_NUM_AST_INDEX_S; \
} while (0)
#define HTT_RX_MLO_PEER_MAP_CACHE_SET_NUM_AST_INDEX_GET(word) \
(((word) & HTT_RX_MLO_PEER_MAP_CACHE_SET_NUM_AST_INDEX_M) >> HTT_RX_MLO_PEER_MAP_CACHE_SET_NUM_AST_INDEX_S)
#define HTT_RX_MLO_PEER_MAP_TLV_TAG_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_MAP_TLV_TAG, value); \
(word) |= (value) << HTT_RX_MLO_PEER_MAP_TLV_TAG_S; \
} while (0)
#define HTT_RX_MLO_PEER_MAP_TLV_TAG_GET(word) \
(((word) & HTT_RX_MLO_PEER_MAP_TLV_TAG_M) >> HTT_RX_MLO_PEER_MAP_TLV_TAG_S)
#define HTT_RX_MLO_PEER_MAP_TLV_LENGTH_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_MAP_TLV_LENGTH, value); \
(word) |= (value) << HTT_RX_MLO_PEER_MAP_TLV_LENGTH_S; \
} while (0)
#define HTT_RX_MLO_PEER_MAP_TLV_LENGTH_GET(word) \
(((word) & HTT_RX_MLO_PEER_MAP_TLV_LENGTH_M) >> HTT_RX_MLO_PEER_MAP_TLV_LENGTH_S)
#define HTT_RX_MLO_PEER_MAP_SW_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_MAP_SW_PEER_ID, value); \
(word) |= (value) << HTT_RX_MLO_PEER_MAP_SW_PEER_ID_S; \
} while (0)
#define HTT_RX_MLO_PEER_MAP_SW_PEER_ID_GET(word) \
(((word) & HTT_RX_MLO_PEER_MAP_SW_PEER_ID_M) >> HTT_RX_MLO_PEER_MAP_SW_PEER_ID_S)
#define HTT_RX_MLO_PEER_MAP_VDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_MAP_VDEV_ID, value); \
(word) |= (value) << HTT_RX_MLO_PEER_MAP_VDEV_ID_S; \
} while (0)
#define HTT_RX_MLO_PEER_MAP_VDEV_ID_GET(word) \
(((word) & HTT_RX_MLO_PEER_MAP_VDEV_ID_M) >> HTT_RX_MLO_PEER_MAP_VDEV_ID_S)
#define HTT_RX_MLO_PEER_MAP_CHIP_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_MLO_PEER_MAP_CHIP_ID, value); \
(word) |= (value) << HTT_RX_MLO_PEER_MAP_CHIP_ID_S; \
} while (0)
#define HTT_RX_MLO_PEER_MAP_CHIP_ID_GET(word) \
(((word) & HTT_RX_MLO_PEER_MAP_CHIP_ID_M) >> HTT_RX_MLO_PEER_MAP_CHIP_ID_S)
#define HTT_RX_MLO_PEER_MAP_MAC_ADDR_OFFSET 4 /* bytes */
#define HTT_RX_MLO_PEER_MAP_PRIMARY_AST_INDEX_0_OFFSET 12 /* bytes */
#define HTT_RX_MLO_PEER_MAP_PRIMARY_AST_INDEX_1_OFFSET 16 /* bytes */
#define HTT_RX_MLO_PEER_MAP_PRIMARY_AST_INDEX_2_OFFSET 20 /* bytes */
#define HTT_RX_MLO_PEER_MAP_TLV_OFFSET 32 /* bytes */
#define HTT_RX_MLO_PEER_MAP_FIXED_BYTES 8*4 /* 8 Dwords. Does not include the TLV header and the TLV */
/* MSG_TYPE => HTT_T2H_MSG_TYPE_MLO_RX_PEER_UNMAP
*
* The following diagram shows the format of the rx mlo peer unmap message sent
* from the target to the host.
*
* |31 24|23 16|15 8|7 0|
* |-----------------------------------------------------------------------|
* | RSVD_24_31 | MLO peer ID | msg type |
* |-----------------------------------------------------------------------|
*/
#define HTT_RX_MLO_PEER_UNMAP_MLO_PEER_ID_M HTT_RX_MLO_PEER_MAP_MLO_PEER_ID_M
#define HTT_RX_MLO_PEER_UNMAP_MLO_PEER_ID_S HTT_RX_MLO_PEER_MAP_MLO_PEER_ID_S
#define HTT_RX_MLO_PEER_UNMAP_MLO_PEER_ID_SET HTT_RX_MLO_PEER_MAP_MLO_PEER_ID_SET
#define HTT_RX_MLO_PEER_UNMAP_MLO_PEER_ID_GET HTT_RX_MLO_PEER_MAP_MLO_PEER_ID_GET
/**
* @brief target -> host peer extended event for additional information
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_PEER_EXTENDED_EVENT
*
* @details
* The following diagram shows the format of the peer extended message sent
* from the target to the host. This layout assumes the target operates
* as little-endian.
*
* This message always contains a SW peer ID. The main purpose of the
* SW peer ID is to tell the host what peer ID logical link id will be tagged
* with, so that the host can use that peer ID to determine which link
* transmitted the rx/tx frame.
*
* This message also contains MLO logical link id assigned to peer
* with sw_peer_id if it is valid ML link peer.
*
*
* |31 28|27 24|23 20|19|18 16|15 8|7 0|
* |---------------------------------------------------------------------------|
* | VDEV_ID | SW peer ID | msg type |
* |---------------------------------------------------------------------------|
* | MAC addr 3 | MAC addr 2 | MAC addr 1 | MAC addr 0 |
* |---------------------------------------------------------------------------|
* | Reserved |V | LINK ID | MAC addr 5 | MAC addr 4 |
* |---------------------------------------------------------------------------|
* | Reserved |
* |---------------------------------------------------------------------------|
* | Reserved |
* |---------------------------------------------------------------------------|
*
* Where:
* LINK_ID (LOGICAL) - 3 Bits Bit16,17,18 of 3rd byte
* V (valid) - 1 Bit Bit19 of 3rd byte
*
* The following field definitions describe the format of the rx peer extended
* event messages sent from the target to the host.
* MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an rx MLO peer extended information message
* Value: 0x39 (HTT_T2H_MSG_TYPE_PEER_EXTENDED_EVENT)
* - PEER_ID (a.k.a. SW_PEER_ID)
* Bits 8:23
* Purpose: The peer ID (index) that WAL has allocated
* Value: (rx) peer ID
* - VDEV_ID
* Bits 24:31
* Purpose: Gives the vdev id of peer with peer_id as above.
* Value: VDEV ID of wal_peer
*
* - MAC_ADDR_L32
* Bits 31:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: lower 4 bytes of peer node's MAC address
*
* - MAC_ADDR_U16
* Bits 15:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: upper 2 bytes of peer node's MAC address
* Rest all bits are reserved for future expansion
* - LOGICAL_LINK_ID
* Bits 18:16
* Purpose: Gives the logical link id of peer with peer_id as above. This
* field should be taken alongwith LOGICAL_LINK_ID_VALID
* Value: Logical link id used by wal_peer
* - LOGICAL_LINK_ID_VALID
* Bit 19
* Purpose: Clarifies whether the logical link id of peer with peer_id as
* is valid or not
* Value: 0/1 indicating LOGICAL_LINK_ID is valid or not
*/
#define HTT_RX_PEER_EXTENDED_PEER_ID_M 0x00ffff00
#define HTT_RX_PEER_EXTENDED_PEER_ID_S 8
#define HTT_RX_PEER_EXTENDED_VDEV_ID_M 0xff000000
#define HTT_RX_PEER_EXTENDED_VDEV_ID_S 24
#define HTT_RX_PEER_EXTENDED_MAC_ADDR_L32_M 0xffffffff
#define HTT_RX_PEER_EXTENDED_MAC_ADDR_L32_S 0
#define HTT_RX_PEER_EXTENDED_MAC_ADDR_U16_M 0x0000ffff
#define HTT_RX_PEER_EXTENDED_MAC_ADDR_U16_S 0
#define HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_M 0x00070000
#define HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_S 16
#define HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_VALID_M 0x00080000
#define HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_VALID_S 19
#define HTT_RX_PEER_EXTENDED_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_MAP_PEER_ID, value); \
(word) |= (value) << HTT_RX_PEER_EXTENDED_PEER_ID_S; \
} while (0)
#define HTT_RX_PEER_EXTENDED_PEER_ID_GET(word) \
(((word) & HTT_RX_PEER_EXTENDED_PEER_ID_M) >> HTT_RX_PEER_EXTENDED_PEER_ID_S)
#define HTT_RX_PEER_EXTENDED_VDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_EXTENDED_VDEV_ID, value); \
(word) |= (value) << HTT_RX_PEER_EXTENDED_VDEV_ID_S; \
} while (0)
#define HTT_RX_PEER_EXTENDED_VDEV_ID_GET(word) \
(((word) & HTT_RX_PEER_EXTENDED_VDEV_ID_M) >> HTT_RX_PEER_EXTENDED_VDEV_ID_S)
#define HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID, value); \
(word) |= (value) << HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_S; \
} while (0)
#define HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_GET(word) \
(((word) & HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_M) >> HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_S)
#define HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_VALID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_VALID, value); \
(word) |= (value) << HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_VALID_S; \
} while (0)
#define HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_VALID_GET(word) \
(((word) & HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_VALID_M) >> HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_VALID_S)
#define HTT_RX_PEER_EXTENDED_MAC_ADDR_OFFSET 4 /* bytes */
#define HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_OFFSET 8 /* bytes */
#define HTT_RX_PEER_EXTENDED_LOGICAL_LINK_ID_VALID_OFFSET 8 /* bytes */
#define HTT_RX_PEER_EXTENDED_EVENT_BYTES 20 /* bytes */
/**
* @brief target -> host message specifying security parameters
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_SEC_IND
*
* @details
* The following diagram shows the format of the security specification
* message sent from the target to the host.
* This security specification message tells the host whether a PN check is
* necessary on rx data frames, and if so, how large the PN counter is.
* This message also tells the host about the security processing to apply
* to defragmented rx frames - specifically, whether a Message Integrity
* Check is required, and the Michael key to use.
*
* |31 24|23 16|15|14 8|7 0|
* |-----------------------------------------------------------------------|
* | peer ID | U| security type | msg type |
* |-----------------------------------------------------------------------|
* | Michael Key K0 |
* |-----------------------------------------------------------------------|
* | Michael Key K1 |
* |-----------------------------------------------------------------------|
* | WAPI RSC Low0 |
* |-----------------------------------------------------------------------|
* | WAPI RSC Low1 |
* |-----------------------------------------------------------------------|
* | WAPI RSC Hi0 |
* |-----------------------------------------------------------------------|
* | WAPI RSC Hi1 |
* |-----------------------------------------------------------------------|
*
* The following field definitions describe the format of the security
* indication message sent from the target to the host.
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a security specification message
* Value: 0xb (HTT_T2H_MSG_TYPE_SEC_IND)
* - SEC_TYPE
* Bits 14:8
* Purpose: specifies which type of security applies to the peer
* Value: htt_sec_type enum value
* - UNICAST
* Bit 15
* Purpose: whether this security is applied to unicast or multicast data
* Value: 1 -> unicast, 0 -> multicast
* - PEER_ID
* Bits 31:16
* Purpose: The ID number for the peer the security specification is for
* Value: peer ID
* - MICHAEL_KEY_K0
* Bits 31:0
* Purpose: 4-byte word that forms the 1st half of the TKIP Michael key
* Value: Michael Key K0 (if security type is TKIP)
* - MICHAEL_KEY_K1
* Bits 31:0
* Purpose: 4-byte word that forms the 2nd half of the TKIP Michael key
* Value: Michael Key K1 (if security type is TKIP)
* - WAPI_RSC_LOW0
* Bits 31:0
* Purpose: 4-byte word that forms the 1st quarter of the 16 byte WAPI RSC
* Value: WAPI RSC Low0 (if security type is WAPI)
* - WAPI_RSC_LOW1
* Bits 31:0
* Purpose: 4-byte word that forms the 2nd quarter of the 16 byte WAPI RSC
* Value: WAPI RSC Low1 (if security type is WAPI)
* - WAPI_RSC_HI0
* Bits 31:0
* Purpose: 4-byte word that forms the 3rd quarter of the 16 byte WAPI RSC
* Value: WAPI RSC Hi0 (if security type is WAPI)
* - WAPI_RSC_HI1
* Bits 31:0
* Purpose: 4-byte word that forms the 4th quarter of the 16 byte WAPI RSC
* Value: WAPI RSC Hi1 (if security type is WAPI)
*/
#define HTT_SEC_IND_SEC_TYPE_M 0x00007f00
#define HTT_SEC_IND_SEC_TYPE_S 8
#define HTT_SEC_IND_UNICAST_M 0x00008000
#define HTT_SEC_IND_UNICAST_S 15
#define HTT_SEC_IND_PEER_ID_M 0xffff0000
#define HTT_SEC_IND_PEER_ID_S 16
#define HTT_SEC_IND_SEC_TYPE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_SEC_IND_SEC_TYPE, value); \
(word) |= (value) << HTT_SEC_IND_SEC_TYPE_S; \
} while (0)
#define HTT_SEC_IND_SEC_TYPE_GET(word) \
(((word) & HTT_SEC_IND_SEC_TYPE_M) >> HTT_SEC_IND_SEC_TYPE_S)
#define HTT_SEC_IND_UNICAST_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_SEC_IND_UNICAST, value); \
(word) |= (value) << HTT_SEC_IND_UNICAST_S; \
} while (0)
#define HTT_SEC_IND_UNICAST_GET(word) \
(((word) & HTT_SEC_IND_UNICAST_M) >> HTT_SEC_IND_UNICAST_S)
#define HTT_SEC_IND_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_SEC_IND_PEER_ID, value); \
(word) |= (value) << HTT_SEC_IND_PEER_ID_S; \
} while (0)
#define HTT_SEC_IND_PEER_ID_GET(word) \
(((word) & HTT_SEC_IND_PEER_ID_M) >> HTT_SEC_IND_PEER_ID_S)
#define HTT_SEC_IND_BYTES 28
/**
* @brief target -> host rx ADDBA / DELBA message definitions
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_ADDBA
*
* @details
* The following diagram shows the format of the rx ADDBA message sent
* from the target to the host:
*
* |31 20|19 16|15 8|7 0|
* |---------------------------------------------------------------------|
* | peer ID | TID | window size | msg type |
* |---------------------------------------------------------------------|
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_DELBA
*
* The following diagram shows the format of the rx DELBA message sent
* from the target to the host:
*
* |31 20|19 16|15 10|9 8|7 0|
* |---------------------------------------------------------------------|
* | peer ID | TID | window size | IR| msg type |
* |---------------------------------------------------------------------|
*
* The following field definitions describe the format of the rx ADDBA
* and DELBA messages sent from the target to the host.
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an rx ADDBA or DELBA message
* Value: ADDBA -> 0x5 (HTT_T2H_MSG_TYPE_RX_ADDBA),
* DELBA -> 0x6 (HTT_T2H_MSG_TYPE_RX_DELBA)
* - IR (initiator / recipient)
* Bits 9:8 (DELBA only)
* Purpose: specify whether the DELBA handshake was initiated by the
* local STA/AP, or by the peer STA/AP
* Value:
* 0 - unspecified
* 1 - initiator (a.k.a. originator)
* 2 - recipient (a.k.a. responder)
* 3 - unused / reserved
* - WIN_SIZE
* Bits 15:8 for ADDBA, bits 15:10 for DELBA
* Purpose: Specifies the length of the block ack window (max = 64).
* Value:
* block ack window length specified by the received ADDBA/DELBA
* management message.
* - TID
* Bits 19:16
* Purpose: Specifies which traffic identifier the ADDBA / DELBA is for.
* Value:
* TID specified by the received ADDBA or DELBA management message.
* - PEER_ID
* Bits 31:20
* Purpose: Identifies which peer sent the ADDBA / DELBA.
* Value:
* ID (hash value) used by the host for fast, direct lookup of
* host SW peer info, including rx reorder states.
*/
#define HTT_RX_ADDBA_WIN_SIZE_M 0xff00
#define HTT_RX_ADDBA_WIN_SIZE_S 8
#define HTT_RX_ADDBA_TID_M 0xf0000
#define HTT_RX_ADDBA_TID_S 16
#define HTT_RX_ADDBA_PEER_ID_M 0xfff00000
#define HTT_RX_ADDBA_PEER_ID_S 20
#define HTT_RX_ADDBA_WIN_SIZE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_ADDBA_WIN_SIZE, value); \
(word) |= (value) << HTT_RX_ADDBA_WIN_SIZE_S; \
} while (0)
#define HTT_RX_ADDBA_WIN_SIZE_GET(word) \
(((word) & HTT_RX_ADDBA_WIN_SIZE_M) >> HTT_RX_ADDBA_WIN_SIZE_S)
#define HTT_RX_ADDBA_TID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_ADDBA_TID, value); \
(word) |= (value) << HTT_RX_ADDBA_TID_S; \
} while (0)
#define HTT_RX_ADDBA_TID_GET(word) \
(((word) & HTT_RX_ADDBA_TID_M) >> HTT_RX_ADDBA_TID_S)
#define HTT_RX_ADDBA_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_ADDBA_PEER_ID, value); \
(word) |= (value) << HTT_RX_ADDBA_PEER_ID_S; \
} while (0)
#define HTT_RX_ADDBA_PEER_ID_GET(word) \
(((word) & HTT_RX_ADDBA_PEER_ID_M) >> HTT_RX_ADDBA_PEER_ID_S)
#define HTT_RX_ADDBA_BYTES 4
#define HTT_RX_DELBA_INITIATOR_M 0x00000300
#define HTT_RX_DELBA_INITIATOR_S 8
#define HTT_RX_DELBA_WIN_SIZE_M 0x0000FC00
#define HTT_RX_DELBA_WIN_SIZE_S 10
#define HTT_RX_DELBA_TID_M HTT_RX_ADDBA_TID_M
#define HTT_RX_DELBA_TID_S HTT_RX_ADDBA_TID_S
#define HTT_RX_DELBA_PEER_ID_M HTT_RX_ADDBA_PEER_ID_M
#define HTT_RX_DELBA_PEER_ID_S HTT_RX_ADDBA_PEER_ID_S
#define HTT_RX_DELBA_TID_SET HTT_RX_ADDBA_TID_SET
#define HTT_RX_DELBA_TID_GET HTT_RX_ADDBA_TID_GET
#define HTT_RX_DELBA_PEER_ID_SET HTT_RX_ADDBA_PEER_ID_SET
#define HTT_RX_DELBA_PEER_ID_GET HTT_RX_ADDBA_PEER_ID_GET
#define HTT_RX_DELBA_INITIATOR_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DELBA_INITIATOR, value); \
(word) |= (value) << HTT_RX_DELBA_INITIATOR_S; \
} while (0)
#define HTT_RX_DELBA_INITIATOR_GET(word) \
(((word) & HTT_RX_DELBA_INITIATOR_M) >> HTT_RX_DELBA_INITIATOR_S)
#define HTT_RX_DELBA_WIN_SIZE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DELBA_WIN_SIZE, value); \
(word) |= (value) << HTT_RX_DELBA_WIN_SIZE_S; \
} while (0)
#define HTT_RX_DELBA_WIN_SIZE_GET(word) \
(((word) & HTT_RX_DELBA_WIN_SIZE_M) >> HTT_RX_DELBA_WIN_SIZE_S)
#define HTT_RX_DELBA_BYTES 4
/**
* @brief target -> host rx ADDBA / DELBA message definitions
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_ADDBA_EXTN
*
* @details
* The following diagram shows the format of the rx ADDBA extn message sent
* from the target to the host:
*
* |31 20|19 16|15 13|12 8|7 0|
* |---------------------------------------------------------------------|
* | peer ID | TID | reserved | msg type |
* |---------------------------------------------------------------------|
* | reserved | window size |
* |---------------------------------------------------------------------|
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_DELBA_EXTN
*
* The following diagram shows the format of the rx DELBA message sent
* from the target to the host:
*
* |31 20|19 16|15 13|12 10|9 8|7 0|
* |---------------------------------------------------------------------|
* | peer ID | TID | reserved | IR| msg type |
* |---------------------------------------------------------------------|
* | reserved | window size |
* |---------------------------------------------------------------------|
*
* The following field definitions describe the format of the rx ADDBA
* and DELBA messages sent from the target to the host.
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an rx ADDBA or DELBA message
* Value: ADDBA -> 0x31 (HTT_T2H_MSG_TYPE_RX_ADDBA_EXTN),
* DELBA -> 0x32 (HTT_T2H_MSG_TYPE_RX_DELBA_EXTN)
* - IR (initiator / recipient)
* Bits 9:8 (DELBA only)
* Purpose: specify whether the DELBA handshake was initiated by the
* local STA/AP, or by the peer STA/AP
* Value:
* 0 - unspecified
* 1 - initiator (a.k.a. originator)
* 2 - recipient (a.k.a. responder)
* 3 - unused / reserved
* Value:
* block ack window length specified by the received ADDBA/DELBA
* management message.
* - TID
* Bits 19:16
* Purpose: Specifies which traffic identifier the ADDBA / DELBA is for.
* Value:
* TID specified by the received ADDBA or DELBA management message.
* - PEER_ID
* Bits 31:20
* Purpose: Identifies which peer sent the ADDBA / DELBA.
* Value:
* ID (hash value) used by the host for fast, direct lookup of
* host SW peer info, including rx reorder states.
* == DWORD 1
* - WIN_SIZE
* Bits 12:0 for ADDBA, bits 12:0 for DELBA
* Purpose: Specifies the length of the block ack window (max = 8191).
*/
#define HTT_RX_ADDBA_EXTN_TID_M 0xf0000
#define HTT_RX_ADDBA_EXTN_TID_S 16
#define HTT_RX_ADDBA_EXTN_PEER_ID_M 0xfff00000
#define HTT_RX_ADDBA_EXTN_PEER_ID_S 20
/*--- Dword 0 ---*/
#define HTT_RX_ADDBA_EXTN_TID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_ADDBA_EXTN_TID, value); \
(word) |= (value) << HTT_RX_ADDBA_EXTN_TID_S; \
} while (0)
#define HTT_RX_ADDBA_EXTN_TID_GET(word) \
(((word) & HTT_RX_ADDBA_EXTN_TID_M) >> HTT_RX_ADDBA_EXTN_TID_S)
#define HTT_RX_ADDBA_EXTN_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_ADDBA_EXTN_PEER_ID, value); \
(word) |= (value) << HTT_RX_ADDBA_EXTN_PEER_ID_S; \
} while (0)
#define HTT_RX_ADDBA_EXTN_PEER_ID_GET(word) \
(((word) & HTT_RX_ADDBA_EXTN_PEER_ID_M) >> HTT_RX_ADDBA_EXTN_PEER_ID_S)
/*--- Dword 1 ---*/
#define HTT_RX_ADDBA_EXTN_WIN_SIZE_M 0x1fff
#define HTT_RX_ADDBA_EXTN_WIN_SIZE_S 0
#define HTT_RX_ADDBA_EXTN_WIN_SIZE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_ADDBA_EXTN_WIN_SIZE, value); \
(word) |= (value) << HTT_RX_ADDBA_EXTN_WIN_SIZE_S; \
} while (0)
#define HTT_RX_ADDBA_EXTN_WIN_SIZE_GET(word) \
(((word) & HTT_RX_ADDBA_WIN_SIZE_M) >> HTT_RX_ADDBA_WIN_SIZE_S)
#define HTT_RX_ADDBA_EXTN_BYTES 8
#define HTT_RX_DELBA_EXTN_INITIATOR_M 0x00000300
#define HTT_RX_DELBA_EXTN_INITIATOR_S 8
#define HTT_RX_DELBA_EXTN_TID_M 0xf0000
#define HTT_RX_DELBA_EXTN_TID_S 16
#define HTT_RX_DELBA_EXTN_PEER_ID_M 0xfff00000
#define HTT_RX_DELBA_EXTN_PEER_ID_S 20
/*--- Dword 0 ---*/
#define HTT_RX_DELBA_INITIATOR_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DELBA_INITIATOR, value); \
(word) |= (value) << HTT_RX_DELBA_INITIATOR_S; \
} while (0)
#define HTT_RX_DELBA_INITIATOR_GET(word) \
(((word) & HTT_RX_DELBA_INITIATOR_M) >> HTT_RX_DELBA_INITIATOR_S)
#define HTT_RX_DELBA_EXTN_TID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DELBA_EXTN_TID, value); \
(word) |= (value) << HTT_RX_DELBA_EXTN_TID_S; \
} while (0)
#define HTT_RX_DELBA_EXTN_TID_GET(word) \
(((word) & HTT_RX_DELBA_EXTN_TID_M) >> HTT_RX_DELBA_EXTN_TID_S)
#define HTT_RX_DELBA_EXTN_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DELBA_EXTN_PEER_ID, value); \
(word) |= (value) << HTT_RX_DELBA_EXTN_PEER_ID_S; \
} while (0)
#define HTT_RX_DELBA_EXTN_PEER_ID_GET(word) \
(((word) & HTT_RX_DELBA_EXTN_PEER_ID_M) >> HTT_RX_DELBA_EXTN_PEER_ID_S)
/*--- Dword 1 ---*/
#define HTT_RX_DELBA_EXTN_WIN_SIZE_M 0x1fff
#define HTT_RX_DELBA_EXTN_WIN_SIZE_S 0
#define HTT_RX_DELBA_EXTN_WIN_SIZE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DELBA_EXTN_WIN_SIZE, value); \
(word) |= (value) << HTT_RX_DELBA_EXTN_WIN_SIZE_S; \
} while (0)
#define HTT_RX_DELBA_EXTN_WIN_SIZE_GET(word) \
(((word) & HTT_RX_DELBA_EXTN_WIN_SIZE_M) >> HTT_RX_DELBA_EXTN_WIN_SIZE_S)
#define HTT_RX_DELBA_EXTN_BYTES 8
/**
* @brief tx queue group information element definition
*
* @details
* The following diagram shows the format of the tx queue group
* information element, which can be included in target --> host
* messages to specify the number of tx "credits" (tx descriptors
* for LL, or tx buffers for HL) available to a particular group
* of host-side tx queues, and which host-side tx queues belong to
* the group.
*
* |31|30 24|23 16|15|14|13 0|
* |------------------------------------------------------------------------|
* | X| reserved | tx queue grp ID | A| S| credit count |
* |------------------------------------------------------------------------|
* | vdev ID mask | AC mask |
* |------------------------------------------------------------------------|
*
* The following definitions describe the fields within the tx queue group
* information element:
* - credit_count
* Bits 13:1
* Purpose: specify how many tx credits are available to the tx queue group
* Value: An absolute or relative, positive or negative credit value
* The 'A' bit specifies whether the value is absolute or relative.
* The 'S' bit specifies whether the value is positive or negative.
* A negative value can only be relative, not absolute.
* An absolute value replaces any prior credit value the host has for
* the tx queue group in question.
* A relative value is added to the prior credit value the host has for
* the tx queue group in question.
* - sign
* Bit 14
* Purpose: specify whether the credit count is positive or negative
* Value: 0 -> positive, 1 -> negative
* - absolute
* Bit 15
* Purpose: specify whether the credit count is absolute or relative
* Value: 0 -> relative, 1 -> absolute
* - txq_group_id
* Bits 23:16
* Purpose: indicate which tx queue group's credit and/or membership are
* being specified
* Value: 0 to max_tx_queue_groups-1
* - reserved
* Bits 30:16
* Value: 0x0
* - eXtension
* Bit 31
* Purpose: specify whether another tx queue group info element follows
* Value: 0 -> no more tx queue group information elements
* 1 -> another tx queue group information element immediately follows
* - ac_mask
* Bits 15:0
* Purpose: specify which Access Categories belong to the tx queue group
* Value: bit-OR of masks for the ACs (WMM and extension) that belong to
* the tx queue group.
* The AC bit-mask values are obtained by left-shifting by the
* corresponding HTT_AC_WMM enum values, e.g. (1 << HTT_AC_WMM_BE) == 0x1
* - vdev_id_mask
* Bits 31:16
* Purpose: specify which vdev's tx queues belong to the tx queue group
* Value: bit-OR of masks based on the IDs of the vdevs whose tx queues
* belong to the tx queue group.
* For example, if vdev IDs 1 and 4 belong to a tx queue group, the
* vdev_id_mask would be (1 << 1) | (1 << 4) = 0x12
*/
PREPACK struct htt_txq_group {
A_UINT32
credit_count: 14,
sign: 1,
absolute: 1,
tx_queue_group_id: 8,
reserved0: 7,
extension: 1;
A_UINT32
ac_mask: 16,
vdev_id_mask: 16;
} POSTPACK;
/* first word */
#define HTT_TXQ_GROUP_CREDIT_COUNT_S 0
#define HTT_TXQ_GROUP_CREDIT_COUNT_M 0x00003fff
#define HTT_TXQ_GROUP_SIGN_S 14
#define HTT_TXQ_GROUP_SIGN_M 0x00004000
#define HTT_TXQ_GROUP_ABS_S 15
#define HTT_TXQ_GROUP_ABS_M 0x00008000
#define HTT_TXQ_GROUP_ID_S 16
#define HTT_TXQ_GROUP_ID_M 0x00ff0000
#define HTT_TXQ_GROUP_EXT_S 31
#define HTT_TXQ_GROUP_EXT_M 0x80000000
/* second word */
#define HTT_TXQ_GROUP_AC_MASK_S 0
#define HTT_TXQ_GROUP_AC_MASK_M 0x0000ffff
#define HTT_TXQ_GROUP_VDEV_ID_MASK_S 16
#define HTT_TXQ_GROUP_VDEV_ID_MASK_M 0xffff0000
#define HTT_TXQ_GROUP_CREDIT_COUNT_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_CREDIT_COUNT, _val); \
((_info) |= ((_val) << HTT_TXQ_GROUP_CREDIT_COUNT_S)); \
} while (0)
#define HTT_TXQ_GROUP_CREDIT_COUNT_GET(_info) \
(((_info) & HTT_TXQ_GROUP_CREDIT_COUNT_M) >> HTT_TXQ_GROUP_CREDIT_COUNT_S)
#define HTT_TXQ_GROUP_SIGN_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_SIGN, _val); \
((_info) |= ((_val) << HTT_TXQ_GROUP_SIGN_S)); \
} while (0)
#define HTT_TXQ_GROUP_SIGN_GET(_info) \
(((_info) & HTT_TXQ_GROUP_SIGN_M) >> HTT_TXQ_GROUP_SIGN_S)
#define HTT_TXQ_GROUP_ABS_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_ABS, _val); \
((_info) |= ((_val) << HTT_TXQ_GROUP_ABS_S)); \
} while (0)
#define HTT_TXQ_GROUP_ABS_GET(_info) \
(((_info) & HTT_TXQ_GROUP_ABS_M) >> HTT_TXQ_GROUP_ABS_S)
#define HTT_TXQ_GROUP_ID_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_ID, _val); \
((_info) |= ((_val) << HTT_TXQ_GROUP_ID_S)); \
} while (0)
#define HTT_TXQ_GROUP_ID_GET(_info) \
(((_info) & HTT_TXQ_GROUP_ID_M) >> HTT_TXQ_GROUP_ID_S)
#define HTT_TXQ_GROUP_EXT_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_EXT, _val); \
((_info) |= ((_val) << HTT_TXQ_GROUP_EXT_S)); \
} while (0)
#define HTT_TXQ_GROUP_EXT_GET(_info) \
(((_info) & HTT_TXQ_GROUP_EXT_M) >> HTT_TXQ_GROUP_EXT_S)
#define HTT_TXQ_GROUP_AC_MASK_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_AC_MASK, _val); \
((_info) |= ((_val) << HTT_TXQ_GROUP_AC_MASK_S)); \
} while (0)
#define HTT_TXQ_GROUP_AC_MASK_GET(_info) \
(((_info) & HTT_TXQ_GROUP_AC_MASK_M) >> HTT_TXQ_GROUP_AC_MASK_S)
#define HTT_TXQ_GROUP_VDEV_ID_MASK_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TXQ_GROUP_VDEV_ID_MASK, _val); \
((_info) |= ((_val) << HTT_TXQ_GROUP_VDEV_ID_MASK_S)); \
} while (0)
#define HTT_TXQ_GROUP_VDEV_ID_MASK_GET(_info) \
(((_info) & HTT_TXQ_GROUP_VDEV_ID_MASK_M) >> HTT_TXQ_GROUP_VDEV_ID_MASK_S)
/**
* @brief target -> host TX completion indication message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_TX_COMPL_IND
*
* @details
* The following diagram shows the format of the TX completion indication sent
* from the target to the host
*
* |31 30|29|28|27|26|25|24|23 16| 15 |14 11|10 8|7 0|
* |-------------------------------------------------------------------|
* header: |rsvd |A4|A3|A2|TP|A1|A0| num | t_i| tid |status| msg_type |
* |-------------------------------------------------------------------|
* payload:| MSDU1 ID | MSDU0 ID |
* |-------------------------------------------------------------------|
* : MSDU3 ID | MSDU2 ID :
* |-------------------------------------------------------------------|
* | struct htt_tx_compl_ind_append_retries |
* |- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -|
* | struct htt_tx_compl_ind_append_tx_tstamp |
* |- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -|
* | MSDU1 ACK RSSI | MSDU0 ACK RSSI |
* |-------------------------------------------------------------------|
* : MSDU3 ACK RSSI | MSDU2 ACK RSSI :
* |- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -|
* | MSDU0 tx_tsf64_low |
* |-------------------------------------------------------------------|
* | MSDU0 tx_tsf64_high |
* |-------------------------------------------------------------------|
* | MSDU1 tx_tsf64_low |
* |-------------------------------------------------------------------|
* | MSDU1 tx_tsf64_high |
* |- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -|
* | phy_timestamp |
* |-------------------------------------------------------------------|
* | rate specs (see below) |
* |-------------------------------------------------------------------|
* | seqctrl | framectrl |
* |- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -|
* Where:
* A0 = append (a.k.a. append0)
* A1 = append1
* TP = MSDU tx power presence
* A2 = append2
* A3 = append3
* A4 = append4
*
* The following field definitions describe the format of the TX completion
* indication sent from the target to the host
* Header fields:
* - msg_type
* Bits 7:0
* Purpose: identifies this as HTT TX completion indication
* Value: 0x7 (HTT_T2H_MSG_TYPE_TX_COMPL_IND)
* - status
* Bits 10:8
* Purpose: the TX completion status of payload fragmentations descriptors
* Value: could be HTT_TX_COMPL_IND_STAT_OK or HTT_TX_COMPL_IND_STAT_DISCARD
* - tid
* Bits 14:11
* Purpose: the tid associated with those fragmentation descriptors. It is
* valid or not, depending on the tid_invalid bit.
* Value: 0 to 15
* - tid_invalid
* Bits 15:15
* Purpose: this bit indicates whether the tid field is valid or not
* Value: 0 indicates valid; 1 indicates invalid
* - num
* Bits 23:16
* Purpose: the number of payload in this indication
* Value: 1 to 255
* - append (a.k.a. append0)
* Bits 24:24
* Purpose: append the struct htt_tx_compl_ind_append_retries which contains
* the number of tx retries for one MSDU at the end of this message
* Value: 0 indicates no appending; 1 indicates appending
* - append1
* Bits 25:25
* Purpose: Append the struct htt_tx_compl_ind_append_tx_tstamp which
* contains the timestamp info for each TX msdu id in payload.
* The order of the timestamps matches the order of the MSDU IDs.
* Note that a big-endian host needs to account for the reordering
* of MSDU IDs within each 4-byte MSDU ID pair (during endianness
* conversion) when determining which tx timestamp corresponds to
* which MSDU ID.
* Value: 0 indicates no appending; 1 indicates appending
* - msdu_tx_power_presence
* Bits 26:26
* Purpose: Indicate whether the TX_COMPL_IND includes a tx power report
* for each MSDU referenced by the TX_COMPL_IND message.
* The tx power is reported in 0.5 dBm units.
* The order of the per-MSDU tx power reports matches the order
* of the MSDU IDs.
* Note that a big-endian host needs to account for the reordering
* of MSDU IDs within each 4-byte MSDU ID pair (during endianness
* conversion) when determining which Tx Power corresponds to
* which MSDU ID.
* Value: 0 indicates MSDU tx power reports are not appended,
* 1 indicates MSDU tx power reports are appended
* - append2
* Bits 27:27
* Purpose: Indicate whether data ACK RSSI is appended for each MSDU in
* TX_COMP_IND message. The order of the per-MSDU ACK RSSI report
* matches the order of the MSDU IDs. Although the ACK RSSI is the
* same for all MSDUs within a single PPDU, the RSSI is duplicated
* for each MSDU, for convenience.
* The ACK RSSI values are valid when status is COMPLETE_OK (and
* this append2 bit is set).
* The ACK RSSI values are SNR in dB, i.e. are the RSSI in units of
* dB above the noise floor.
* Value: 0 indicates MSDU ACK RSSI values are not appended,
* 1 indicates MSDU ACK RSSI values are appended.
* - append3
* Bits 28:28
* Purpose: Append the struct htt_tx_compl_ind_append_tx_tsf64 which
* contains the tx tsf info based on wlan global TSF for
* each TX msdu id in payload.
* The order of the tx tsf matches the order of the MSDU IDs.
* The struct htt_tx_compl_ind_append_tx_tsf64 contains two 32-bits
* values to indicate the the lower 32 bits and higher 32 bits of
* the tx tsf.
* The tx_tsf64 here represents the time MSDU was acked and the
* tx_tsf64 has microseconds units.
* Value: 0 indicates no appending; 1 indicates appending
* - append4
* Bits 29:29
* Purpose: Indicate whether data frame control fields and fields required
* for radio tap header are appended for each MSDU in TX_COMP_IND
* message. The order of the this message matches the order of
* the MSDU IDs.
* Value: 0 indicates frame control fields and fields required for
* radio tap header values are not appended,
* 1 indicates frame control fields and fields required for
* radio tap header values are appended.
* Payload fields:
* - hmsdu_id
* Bits 15:0
* Purpose: this ID is used to track the Tx buffer in host
* Value: 0 to "size of host MSDU descriptor pool - 1"
*/
PREPACK struct htt_tx_data_hdr_information {
A_UINT32 phy_timestamp_l32; /* word 0 [31:0] */
A_UINT32 /* word 1 */
/* preamble:
* 0-OFDM,
* 1-CCk,
* 2-HT,
* 3-VHT
*/
preamble: 2, /* [1:0] */
/* mcs:
* In case of HT preamble interpret
* MCS along with NSS.
* Valid values for HT are 0 to 7.
* HT mcs 0 with NSS 2 is mcs 8.
* Valid values for VHT are 0 to 9.
*/
mcs: 4, /* [5:2] */
/* rate:
* This is applicable only for
* CCK and OFDM preamble type
* rate 0: OFDM 48 Mbps,
* 1: OFDM 24 Mbps,
* 2: OFDM 12 Mbps
* 3: OFDM 6 Mbps
* 4: OFDM 54 Mbps
* 5: OFDM 36 Mbps
* 6: OFDM 18 Mbps
* 7: OFDM 9 Mbps
* rate 0: CCK 11 Mbps Long
* 1: CCK 5.5 Mbps Long
* 2: CCK 2 Mbps Long
* 3: CCK 1 Mbps Long
* 4: CCK 11 Mbps Short
* 5: CCK 5.5 Mbps Short
* 6: CCK 2 Mbps Short
*/
rate : 3, /* [ 8: 6] */
rssi : 8, /* [16: 9] units=dBm */
nss : 2, /* [18:17] if nss 1 means 1ss and 2 means 2ss */
bw : 3, /* [21:19] (0=>20MHz, 1=>40MHz, 2=>80MHz, 3=>160MHz) */
stbc : 1, /* [22] */
sgi : 1, /* [23] */
ldpc : 1, /* [24] */
beamformed: 1, /* [25] */
/* tx_retry_cnt:
* Indicates retry count of data tx frames provided by the host.
*/
tx_retry_cnt: 6; /* [31:26] */
A_UINT32 /* word 2 */
framectrl:16, /* [15: 0] */
seqno:16; /* [31:16] */
} POSTPACK;
#define HTT_TX_COMPL_IND_STATUS_S 8
#define HTT_TX_COMPL_IND_STATUS_M 0x00000700
#define HTT_TX_COMPL_IND_TID_S 11
#define HTT_TX_COMPL_IND_TID_M 0x00007800
#define HTT_TX_COMPL_IND_TID_INV_S 15
#define HTT_TX_COMPL_IND_TID_INV_M 0x00008000
#define HTT_TX_COMPL_IND_NUM_S 16
#define HTT_TX_COMPL_IND_NUM_M 0x00ff0000
#define HTT_TX_COMPL_IND_APPEND_S 24
#define HTT_TX_COMPL_IND_APPEND_M 0x01000000
#define HTT_TX_COMPL_IND_APPEND1_S 25
#define HTT_TX_COMPL_IND_APPEND1_M 0x02000000
#define HTT_TX_COMPL_IND_TX_POWER_S 26
#define HTT_TX_COMPL_IND_TX_POWER_M 0x04000000
#define HTT_TX_COMPL_IND_APPEND2_S 27
#define HTT_TX_COMPL_IND_APPEND2_M 0x08000000
#define HTT_TX_COMPL_IND_APPEND3_S 28
#define HTT_TX_COMPL_IND_APPEND3_M 0x10000000
#define HTT_TX_COMPL_IND_APPEND4_S 29
#define HTT_TX_COMPL_IND_APPEND4_M 0x20000000
#define HTT_TX_COMPL_IND_STATUS_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_STATUS, _val); \
((_info) |= ((_val) << HTT_TX_COMPL_IND_STATUS_S)); \
} while (0)
#define HTT_TX_COMPL_IND_STATUS_GET(_info) \
(((_info) & HTT_TX_COMPL_IND_STATUS_M) >> HTT_TX_COMPL_IND_STATUS_S)
#define HTT_TX_COMPL_IND_NUM_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_NUM, _val); \
((_info) |= ((_val) << HTT_TX_COMPL_IND_NUM_S)); \
} while (0)
#define HTT_TX_COMPL_IND_NUM_GET(_info) \
(((_info) & HTT_TX_COMPL_IND_NUM_M) >> HTT_TX_COMPL_IND_NUM_S)
#define HTT_TX_COMPL_IND_TID_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_TID, _val); \
((_info) |= ((_val) << HTT_TX_COMPL_IND_TID_S)); \
} while (0)
#define HTT_TX_COMPL_IND_TID_GET(_info) \
(((_info) & HTT_TX_COMPL_IND_TID_M) >> HTT_TX_COMPL_IND_TID_S)
#define HTT_TX_COMPL_IND_TID_INV_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_TID_INV, _val); \
((_info) |= ((_val) << HTT_TX_COMPL_IND_TID_INV_S)); \
} while (0)
#define HTT_TX_COMPL_IND_TID_INV_GET(_info) \
(((_info) & HTT_TX_COMPL_IND_TID_INV_M) >> \
HTT_TX_COMPL_IND_TID_INV_S)
#define HTT_TX_COMPL_IND_APPEND_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_APPEND, _val); \
((_info) |= ((_val) << HTT_TX_COMPL_IND_APPEND_S)); \
} while (0)
#define HTT_TX_COMPL_IND_APPEND_GET(_info) \
(((_info) & HTT_TX_COMPL_IND_APPEND_M) >> HTT_TX_COMPL_IND_APPEND_S)
#define HTT_TX_COMPL_IND_APPEND1_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_APPEND1, _val); \
((_info) |= ((_val) << HTT_TX_COMPL_IND_APPEND1_S)); \
} while (0)
#define HTT_TX_COMPL_IND_APPEND1_GET(_info) \
(((_info) & HTT_TX_COMPL_IND_APPEND1_M) >> HTT_TX_COMPL_IND_APPEND1_S)
#define HTT_TX_COMPL_IND_TX_POWER_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_TX_POWER, _val); \
((_info) |= ((_val) << HTT_TX_COMPL_IND_TX_POWER_S)); \
} while (0)
#define HTT_TX_COMPL_IND_TX_POWER_GET(_info) \
(((_info) & HTT_TX_COMPL_IND_TX_POWER_M) >> HTT_TX_COMPL_IND_TX_POWER_S)
#define HTT_TX_COMPL_IND_APPEND2_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_APPEND2, _val); \
((_info) |= ((_val) << HTT_TX_COMPL_IND_APPEND2_S)); \
} while (0)
#define HTT_TX_COMPL_IND_APPEND2_GET(_info) \
(((_info) & HTT_TX_COMPL_IND_APPEND2_M) >> HTT_TX_COMPL_IND_APPEND2_S)
#define HTT_TX_COMPL_IND_APPEND3_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_APPEND3, _val); \
((_info) |= ((_val) << HTT_TX_COMPL_IND_APPEND3_S)); \
} while (0)
#define HTT_TX_COMPL_IND_APPEND3_GET(_info) \
(((_info) & HTT_TX_COMPL_IND_APPEND3_M) >> HTT_TX_COMPL_IND_APPEND3_S)
#define HTT_TX_COMPL_IND_APPEND4_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_COMPL_IND_APPEND4, _val); \
((_info) |= ((_val) << HTT_TX_COMPL_IND_APPEND4_S)); \
} while (0)
#define HTT_TX_COMPL_IND_APPEND4_GET(_info) \
(((_info) & HTT_TX_COMPL_IND_APPEND4_M) >> HTT_TX_COMPL_IND_APPEND4_S)
#define HTT_TX_COMPL_INV_TX_POWER 0xffff
#define HTT_TX_COMPL_CTXT_SZ sizeof(A_UINT16)
#define HTT_TX_COMPL_CTXT_NUM(_bytes) ((_bytes) >> 1)
#define HTT_TX_COMPL_INV_MSDU_ID 0xffff
#define HTT_TX_COMPL_IND_STAT_OK 0
/* DISCARD:
* current meaning:
* MSDUs were queued for transmission but filtered by HW or SW
* without any over the air attempts
* legacy meaning (HL Rome):
* MSDUs were discarded by the target FW without any over the air
* attempts due to lack of space
*/
#define HTT_TX_COMPL_IND_STAT_DISCARD 1
/* NO_ACK:
* MSDUs were transmitted (repeatedly) but no ACK was received from the peer
*/
#define HTT_TX_COMPL_IND_STAT_NO_ACK 2
/* POSTPONE:
* temporarily-undeliverable MSDUs were deleted to free up space, but should
* be downloaded again later (in the appropriate order), when they are
* deliverable.
*/
#define HTT_TX_COMPL_IND_STAT_POSTPONE 3
/*
* The PEER_DEL tx completion status is used for HL cases
* where the peer the frame is for has been deleted.
* The host has already discarded its copy of the frame, but
* it still needs the tx completion to restore its credit.
*/
#define HTT_TX_COMPL_IND_STAT_PEER_DEL 4
/* DROP: MSDUs dropped due to lack of space (congestion control) */
#define HTT_TX_COMPL_IND_STAT_DROP 5
#define HTT_TX_COMPL_IND_STAT_HOST_INSPECT 6
#define HTT_TX_COMPL_IND_APPEND_SET_MORE_RETRY(f) ((f) |= 0x1)
#define HTT_TX_COMPL_IND_APPEND_CLR_MORE_RETRY(f) ((f) &= (~0x1))
PREPACK struct htt_tx_compl_ind_base {
A_UINT32 hdr;
A_UINT16 payload[1/*or more*/];
} POSTPACK;
PREPACK struct htt_tx_compl_ind_append_retries {
A_UINT16 msdu_id;
A_UINT8 tx_retries;
A_UINT8 flag; /* Bit 0, 1: another append_retries struct is appended
0: this is the last append_retries struct */
} POSTPACK;
PREPACK struct htt_tx_compl_ind_append_tx_tstamp {
A_UINT32 timestamp[1/*or more*/];
} POSTPACK;
PREPACK struct htt_tx_compl_ind_append_tx_tsf64 {
A_UINT32 tx_tsf64_low;
A_UINT32 tx_tsf64_high;
} POSTPACK;
/* htt_tx_data_hdr_information payload extension fields: */
/* DWORD zero */
#define HTT_FW_TX_DATA_HDR_PHY_TIMESTAMP_L32_M 0xffffffff
#define HTT_FW_TX_DATA_HDR_PHY_TIMESTAMP_L32_S 0
/* DWORD one */
#define HTT_FW_TX_DATA_HDR_PREAMBLE_M 0x00000003
#define HTT_FW_TX_DATA_HDR_PREAMBLE_S 0
#define HTT_FW_TX_DATA_HDR_MCS_M 0x0000003c
#define HTT_FW_TX_DATA_HDR_MCS_S 2
#define HTT_FW_TX_DATA_HDR_RATE_M 0x000001c0
#define HTT_FW_TX_DATA_HDR_RATE_S 6
#define HTT_FW_TX_DATA_HDR_RSSI_M 0x0001fe00
#define HTT_FW_TX_DATA_HDR_RSSI_S 9
#define HTT_FW_TX_DATA_HDR_NSS_M 0x00060000
#define HTT_FW_TX_DATA_HDR_NSS_S 17
#define HTT_FW_TX_DATA_HDR_BW_M 0x00380000
#define HTT_FW_TX_DATA_HDR_BW_S 19
#define HTT_FW_TX_DATA_HDR_STBC_M 0x00400000
#define HTT_FW_TX_DATA_HDR_STBC_S 22
#define HTT_FW_TX_DATA_HDR_SGI_M 0x00800000
#define HTT_FW_TX_DATA_HDR_SGI_S 23
#define HTT_FW_TX_DATA_HDR_LDPC_M 0x01000000
#define HTT_FW_TX_DATA_HDR_LDPC_S 24
#define HTT_FW_TX_DATA_HDR_BEAMFORMED_M 0x02000000
#define HTT_FW_TX_DATA_HDR_BEAMFORMED_S 25
#define HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_M 0xfc000000
#define HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_S 26
/* DWORD two */
#define HTT_FW_TX_DATA_HDR_FRAMECTRL_M 0x0000ffff
#define HTT_FW_TX_DATA_HDR_FRAMECTRL_S 0
#define HTT_FW_TX_DATA_HDR_SEQNO_M 0xffff0000
#define HTT_FW_TX_DATA_HDR_SEQNO_S 16
#define HTT_FW_TX_DATA_HDR_PHY_TIMESTAMP_L32_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_PHY_TIMESTAMP_L32, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_PHY_TIMESTAMP_L32_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_PHY_TIMESTAMP_L32_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_PHY_TIMESTAMP_L32_M) >> HTT_FW_TX_DATA_HDR_PHY_TIMESTAMP_L32_S)
#define HTT_FW_TX_DATA_HDR_PREAMBLE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_PREAMBLE, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_PREAMBLE_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_PREAMBLE_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_PREAMBLE_M) >> HTT_FW_TX_DATA_HDR_PREAMBLE_S)
#define HTT_FW_TX_DATA_HDR_MCS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_MCS, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_MCS_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_MCS_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_MCS_M) >> HTT_FW_TX_DATA_HDR_MCS_S)
#define HTT_FW_TX_DATA_HDR_RATE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_RATE, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_RATE_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_RATE_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_RATE_M) >> HTT_FW_TX_DATA_HDR_RATE_S)
#define HTT_FW_TX_DATA_HDR_RSSI_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_RSSI, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_RSSI_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_RSSI_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_RSSI_M) >> HTT_FW_TX_DATA_HDR_RSSI_S)
#define HTT_FW_TX_DATA_HDR_NSS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_NSS, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_NSS_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_NSS_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_NSS_M) >> HTT_FW_TX_DATA_HDR_NSS_S)
#define HTT_FW_TX_DATA_HDR_BW_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_BW, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_BW_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_BW_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_BW_M) >> HTT_FW_TX_DATA_HDR_BW_S)
#define HTT_FW_TX_DATA_HDR_STBC_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_STBC, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_STBC_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_STBC_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_STBC_M) >> HTT_FW_TX_DATA_HDR_STBC_S)
#define HTT_FW_TX_DATA_HDR_SGI_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_SGI, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_SGI_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_SGI_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_SGI_M) >> HTT_FW_TX_DATA_HDR_SGI_S)
#define HTT_FW_TX_DATA_HDR_LDPC_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_LDPC, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_LDPC_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_LDPC_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_LDPC_M) >> HTT_FW_TX_DATA_HDR_LDPC_S)
#define HTT_FW_TX_DATA_HDR_BEAMFORMED_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_BEAMFORMED, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_BEAMFORMED_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_BEAMFORMED_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_BEAMFORMED_M) >> HTT_FW_TX_DATA_HDR_BEAMFORMED_S)
#define HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_TX_RETRY_CNT, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_M) >> HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_S)
#define HTT_FW_TX_DATA_HDR_FRAMECTRL_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_FRAMECTRL, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_FRAMECTRL_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_FRAMECTRL_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_FRAMECTRL_M) >> HTT_FW_TX_DATA_HDR_FRAMECTRL_S)
#define HTT_FW_TX_DATA_HDR_SEQNO_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_SEQNO, value); \
(word) |= (value) << HTT_FW_TX_DATA_HDR_SEQNO_S; \
} while (0)
#define HTT_FW_TX_DATA_HDR_SEQNO_GET(word) \
(((word) & HTT_FW_TX_DATA_HDR_SEQNO_M) >> HTT_FW_TX_DATA_HDR_SEQNO_S)
/**
* @brief target -> host software UMAC TX completion indication message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_SOFT_UMAC_TX_COMPL_IND
*
* @details
* The following diagram shows the format of the soft UMAC TX completion
* indication sent from the target to the host
*
* |31 30|29|28|27|26 20|19 17|16|15 12|11|10| 9|8|7 4|3 1|0|
* |-------------------------------------+----------------+------------|
* hdr: | rsvd | msdu_cnt | msg_type |
* pyld: |===================================================================|
* MSDU 0| buf addr low (bits 31:0) |
* |-----------------------------------------------+------+------------|
* | SW buffer cookie | RS | buf addr hi|
* |--------+--+--+-------------+--------+---------+------+------------|
* | rsvd0 | M| V| tx count | TID | SW peer ID |
* |--------+--+--+-------------+--------+----------------------+------|
* | frametype | TQM status number | RELR |
* |-----+-----+-----------------------------------+--+-+-+-----+------|
* |rsvd1| buffer timestamp | A|L|F| ACK RSSI |
* |-----+--+-------------------------+--+------+-----+--+-+-----+---+-|
* | rsvd2 | tones in RU |OF|tx MCS|txSGI|LC|S|PKTYP|BW |I|
* |--------+-------------------------+--+------+-----+--+-+-----+---+-|
* | PPDU transmission TSF |
* |-------------------------------------------------------------------|
* | rsvd3 |
* |===================================================================|
* MSDU 1| buf addr low (bits 31:0) |
* : ... :
* | rsvd3 |
* |===================================================================|
* etc.
*
* Where:
* RS = release source
* V = valid
* M = multicast
* RELR = release reason
* F = first MSDU
* L = last MSDU
* A = MSDU is part of A-MSDU
* I = rate info valid
* PKTYP = packet type
* S = STBC
* LC = LDPC
* OF = OFDMA transmission
*/
typedef enum {
/* 0 (REASON_FRAME_ACKED):
* Corresponds to tqm_release_reason = <enum 0 tqm_rr_frame_acked>;
* frame is removed because an ACK of BA for it was received.
*/
HTT_TX_MSDU_RELEASE_REASON_FRAME_ACKED,
/* 1 (REASON_REMOVE_CMD_FW):
* Corresponds to tqm_release_reason = <enum 1 tqm_rr_rem_cmd_rem>;
* frame is removed because a remove command of type "Remove_mpdus"
* initiated by SW.
*/
HTT_TX_MSDU_RELEASE_REASON_REMOVE_CMD_FW,
/* 2 (REASON_REMOVE_CMD_TX):
* Corresponds to tqm_release_reason = <enum 2 tqm_rr_rem_cmd_tx>;
* frame is removed because a remove command of type
* "Remove_transmitted_mpdus" initiated by SW.
*/
HTT_TX_MSDU_RELEASE_REASON_REMOVE_CMD_TX,
/* 3 (REASON_REMOVE_CMD_NOTX):
* Corresponds to tqm_release_reason = <enum 3 tqm_rr_rem_cmd_notx>;
* frame is removed because a remove command of type
* "Remove_untransmitted_mpdus" initiated by SW.
*/
HTT_TX_MSDU_RELEASE_REASON_REMOVE_CMD_NOTX,
/* 4 (REASON_REMOVE_CMD_AGED):
* Corresponds to tqm_release_reason = <enum 4 tqm_rr_rem_cmd_aged>;
* frame is removed because a remove command of type "Remove_aged_mpdus"
* or "Remove_aged_msdus" initiated by SW.
*/
HTT_TX_MSDU_RELEASE_REASON_REMOVE_CMD_AGED,
/* 5 (RELEASE_FW_REASON1):
* Corresponds to tqm_release_reason = <enum 5 tqm_fw_reason1>;
* frame is removed because a remove command where fw indicated that
* remove reason is fw_reason1.
*/
HTT_TX_MSDU_RELEASE_FW_REASON1,
/* 6 (RELEASE_FW_REASON2):
* Corresponds to tqm_release_reason = <enum 6 tqm_fw_reason2>;
* frame is removed because a remove command where fw indicated that
* remove reason is fw_reason1.
*/
HTT_TX_MSDU_RELEASE_FW_REASON2,
/* 7 (RELEASE_FW_REASON3):
* Corresponds to tqm_release_reason = <enum 7 tqm_fw_reason3>;
* frame is removed because a remove command where fw indicated that
* remove reason is fw_reason1.
*/
HTT_TX_MSDU_RELEASE_FW_REASON3,
/* 8 (REASON_REMOVE_CMD_DISABLEQ):
* Corresponds to tqm_release_reason = <enum 8 tqm_rr_rem_cmd_disable_queue>
* frame is removed because a remove command of type
* "remove_mpdus_and_disable_queue" or "remove_msdus_and_disable_flow"
* initiated by SW.
*/
HTT_TX_MSDU_RELEASE_REASON_REMOVE_CMD_DISABLEQ,
/* 9 (REASON_DROP_MISC):
* Corresponds to sw_release_reason = Packet dropped by FW due to
* any discard reason that is not categorized as MSDU TTL expired.
* Examples: TXDE ENQ layer dropped the packet due to peer delete,
* tid delete, no resource credit available.
*/
HTT_TX_MSDU_RELEASE_REASON_DROP_MISC,
/* 10 (REASON_DROP_TTL):
* Corresponds to sw_release_reason = Packet dropped by FW due to
* discard reason that frame is not transmitted due to MSDU TTL expired.
*/
HTT_TX_MSDU_RELEASE_REASON_DROP_TTL,
/* 11 - available for use */
/* 12 - available for use */
/* 13 - available for use */
/* 14 - available for use */
/* 15 - available for use */
HTT_TX_MSDU_RELEASE_REASON_MAX = 16
} htt_t2h_tx_msdu_release_reason_e;
typedef enum {
/* 0 (RELEASE_SOURCE_FW):
* MSDU released by FW even before the frame was queued to TQM-L HW.
*/
HTT_TX_MSDU_RELEASE_SOURCE_FW,
/* 1 (RELEASE_SOURCE_TQM_LITE):
* MSDU released by TQM-L HW.
*/
HTT_TX_MSDU_RELEASE_SOURCE_TQM_LITE,
HTT_TX_MSDU_RELEASE_SOURCE_MAX = 8
} htt_t2h_tx_msdu_release_source_e;
struct htt_t2h_tx_buffer_addr_info { /* 2 words */
A_UINT32 buffer_addr_31_0 : 32; /* [31:0] */
A_UINT32 buffer_addr_39_32 : 8, /* [7:0] */
/* release_source:
* holds a htt_t2h_tx_msdu_release_source_e enum value
*/
release_source : 3, /* [10:8] */
sw_buffer_cookie : 21; /* [31:11] */
/* NOTE:
* To preserve backwards compatibility,
* no new fields can be added in this struct.
*/
};
/* member definitions of htt_t2h_tx_buffer_addr_info */
#define HTT_TX_BUFFER_ADDR_INFO_ADDR_31_0_M 0xFFFFFFFF
#define HTT_TX_BUFFER_ADDR_INFO_ADDR_31_0_S 0
#define HTT_TX_BUFFER_ADDR_INFO_ADDR_31_0_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_BUFFER_ADDR_INFO_ADDR_31_0, value); \
(word) |= (value) << HTT_TX_BUFFER_ADDR_INFO_ADDR_31_0_S; \
} while (0)
#define HTT_TX_BUFFER_ADDR_INFO_ADDR_31_0_GET(word) \
(((word) & HTT_TX_BUFFER_ADDR_INFO_ADDR_31_0_M) >> HTT_TX_BUFFER_ADDR_INFO_ADDR_31_0_S)
#define HTT_TX_BUFFER_ADDR_INFO_ADDR_39_32_M 0x000000FF
#define HTT_TX_BUFFER_ADDR_INFO_ADDR_39_32_S 0
#define HTT_TX_BUFFER_ADDR_INFO_ADDR_39_32_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_BUFFER_ADDR_INFO_ADDR_39_32, value); \
(word) |= (value) << HTT_TX_BUFFER_ADDR_INFO_ADDR_39_32_S; \
} while (0)
#define HTT_TX_BUFFER_ADDR_INFO_ADDR_39_32_GET(word) \
(((word) & HTT_TX_BUFFER_ADDR_INFO_ADDR_39_32_M) >> HTT_TX_BUFFER_ADDR_INFO_ADDR_39_32_S)
#define HTT_TX_BUFFER_ADDR_INFO_RELEASE_SOURCE_M 0x00000700
#define HTT_TX_BUFFER_ADDR_INFO_RELEASE_SOURCE_S 8
#define HTT_TX_BUFFER_ADDR_INFO_RELEASE_SOURCE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_BUFFER_ADDR_INFO_RELEASE_SOURCE, value); \
(word) |= (value) << HTT_TX_BUFFER_ADDR_INFO_RELEASE_SOURCE_S; \
} while (0)
#define HTT_TX_BUFFER_ADDR_INFO_RELEASE_SOURCE_GET(word) \
(((word) & HTT_TX_BUFFER_ADDR_INFO_RELEASE_SOURCE_M) >> HTT_TX_BUFFER_ADDR_INFO_RELEASE_SOURCE_S)
#define HTT_TX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_M 0xFFFFF800
#define HTT_TX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_S 11
#define HTT_TX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE, value); \
(word) |= (value) << HTT_TX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_S; \
} while (0)
#define HTT_TX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_GET(word) \
(((word) & HTT_TX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_M) >> HTT_TX_BUFFER_ADDR_INFO_SW_BUFFER_COOKIE_S)
struct htt_t2h_tx_rate_stats_info { /* 2 words */
/* word 0 */
A_UINT32
/* tx_rate_stats_info_valid:
* Indicates if the tx rate stats below are valid.
*/
tx_rate_stats_info_valid : 1, /* [0] */
/* transmit_bw:
* Same as TX_RATE_STATS_INFO. Transmit_BW populated by MAC HW.
* Indicates the BW of the upcoming transmission that shall likely
* start in about 3 -4 us on the medium:
* <enum 0 transmit_bw_20_MHz>
* <enum 1 transmit_bw_40_MHz>
* <enum 2 transmit_bw_80_MHz>
* <enum 3 transmit_bw_160_MHz>
* <enum 4 transmit_bw_320_MHz>
*/
transmit_bw : 3, /* [3:1] */
/* transmit_pkt_type:
* same as TX_RATE_STATS_INFO. Transmit_BW populated by MAC HW.
* Field filled in by PDG.
* Not valid when in SW transmit mode
* The packet type
* <enum_type PKT_TYPE_ENUM>
* Type: enum Definition Name: PKT_TYPE_ENUM
* enum number enum name Description
* ------------------------------------
* 0 dot11a 802.11a PPDU type
* 1 dot11b 802.11b PPDU type
* 2 dot11n_mm 802.11n Mixed Mode PPDU type
* 3 dot11ac 802.11ac PPDU type
* 4 dot11ax 802.11ax PPDU type
* 5 dot11ba 802.11ba (WUR) PPDU type
* 6 dot11be 802.11be PPDU type
* 7 dot11az 802.11az (ranging) PPDU type
*/
transmit_pkt_type : 4, /* [7:4] */
/* transmit_stbc:
* Same as TX_RATE_STATS_INFO. Transmit_BW populated by MAC HW.
* Field filled in by PDG.
* Not valid when in SW transmit mode
* When set, STBC transmission rate was used.
*/
transmit_stbc : 1, /* [8] */
/* transmit_ldpc:
* Same as TX_RATE_STATS_INFO. Transmit_BW populated by MAC HW.
* Field filled in by PDG.
* Not valid when in SW transmit mode
* When set, use LDPC transmission rates
*/
transmit_ldpc : 1, /* [9] */
/* transmit_sgi:
* Same as TX_RATE_STATS_INFO. Transmit_BW populated by MAC HW.
* Field filled in by PDG.
* Not valid when in SW transmit mode
* <enum 0 0_8_us_sgi > Legacy normal GI. Can also be used for HE
* <enum 1 0_4_us_sgi > Legacy short GI. Can also be used for HE
* <enum 2 1_6_us_sgi > HE related GI
* <enum 3 3_2_us_sgi > HE related GI
* <legal 0 - 3>
*/
transmit_sgi : 2, /* [11:10] */
/* transmit_mcs:
* Same as TX_RATE_STATS_INFO. Transmit_BW populated by MAC HW.
* Field filled in by PDG.
* Not valid when in SW transmit mode
*
* For details, refer to MCS_TYPE description
* <legal all>
* Pkt_type Related definition of MCS_TYPE
* dot11b This field is the rate:
* 0: CCK 11 Mbps Long
* 1: CCK 5.5 Mbps Long
* 2: CCK 2 Mbps Long
* 3: CCK 1 Mbps Long
* 4: CCK 11 Mbps Short
* 5: CCK 5.5 Mbps Short
* 6: CCK 2 Mbps Short
* NOTE: The numbering here is NOT the same as the as MAC gives
* in the "rate" field in the SIG given to the PHY.
* The MAC will do an internal translation.
*
* Dot11a This field is the rate:
* 0: OFDM 48 Mbps
* 1: OFDM 24 Mbps
* 2: OFDM 12 Mbps
* 3: OFDM 6 Mbps
* 4: OFDM 54 Mbps
* 5: OFDM 36 Mbps
* 6: OFDM 18 Mbps
* 7: OFDM 9 Mbps
* NOTE: The numbering here is NOT the same as the as MAC gives
* in the "rate" field in the SIG given to the PHY.
* The MAC will do an internal translation.
*
* Dot11n_mm (mixed mode) This field represends the MCS.
* 0: HT MCS 0 (BPSK 1/2)
* 1: HT MCS 1 (QPSK 1/2)
* 2: HT MCS 2 (QPSK 3/4)
* 3: HT MCS 3 (16-QAM 1/2)
* 4: HT MCS 4 (16-QAM 3/4)
* 5: HT MCS 5 (64-QAM 2/3)
* 6: HT MCS 6 (64-QAM 3/4)
* 7: HT MCS 7 (64-QAM 5/6)
* NOTE: To get higher MCS's use the nss field to indicate the
* number of spatial streams.
*
* Dot11ac This field represends the MCS.
* 0: VHT MCS 0 (BPSK 1/2)
* 1: VHT MCS 1 (QPSK 1/2)
* 2: VHT MCS 2 (QPSK 3/4)
* 3: VHT MCS 3 (16-QAM 1/2)
* 4: VHT MCS 4 (16-QAM 3/4)
* 5: VHT MCS 5 (64-QAM 2/3)
* 6: VHT MCS 6 (64-QAM 3/4)
* 7: VHT MCS 7 (64-QAM 5/6)
* 8: VHT MCS 8 (256-QAM 3/4)
* 9: VHT MCS 9 (256-QAM 5/6)
* 10: VHT MCS 10 (1024-QAM 3/4)
* 11: VHT MCS 11 (1024-QAM 5/6)
* NOTE: There are several illegal VHT rates due to fractional
* number of bits per symbol.
* Below are the illegal rates for 4 streams and lower:
* 20 MHz, 1 stream, MCS 9
* 20 MHz, 2 stream, MCS 9
* 20 MHz, 4 stream, MCS 9
* 80 MHz, 3 stream, MCS 6
* 160 MHz, 3 stream, MCS 9 (Unsupported)
* 160 MHz, 4 stream, MCS 7 (Unsupported)
*
* dot11ax This field represends the MCS.
* 0: HE MCS 0 (BPSK 1/2)
* 1: HE MCS 1 (QPSK 1/2)
* 2: HE MCS 2 (QPSK 3/4)
* 3: HE MCS 3 (16-QAM 1/2)
* 4: HE MCS 4 (16-QAM 3/4)
* 5: HE MCS 5 (64-QAM 2/3)
* 6: HE MCS 6 (64-QAM 3/4)
* 7: HE MCS 7 (64-QAM 5/6)
* 8: HE MCS 8 (256-QAM 3/4)
* 9: HE MCS 9 (256-QAM 5/6)
* 10: HE MCS 10 (1024-QAM 3/4)
* 11: HE MCS 11 (1024-QAM 5/6)
* 12: HE MCS 12 (4096-QAM 3/4)
* 13: HE MCS 13 (4096-QAM 5/6)
*
* dot11ba This field is the rate:
* 0: LDR
* 1: HDR
* 2: Exclusive rate
*/
transmit_mcs : 4, /* [15:12] */
/* ofdma_transmission:
* Same as TX_RATE_STATS_INFO. Transmit_BW populated by MAC HW.
* Field filled in by PDG.
* Set when the transmission was an OFDMA transmission (DL or UL).
* <legal all>
*/
ofdma_transmission : 1, /* [16] */
/* tones_in_ru:
* Same as TX_RATE_STATS_INFO. Transmit_BW populated by MAC HW.
* Field filled in by PDG.
* Not valid when in SW transmit mode
* The number of tones in the RU used.
* <legal all>
*/
tones_in_ru : 12, /* [28:17] */
rsvd2 : 3; /* [31:29] */
/* word 1 */
/* ppdu_transmission_tsf:
* Based on a HWSCH configuration register setting,
* this field either contains:
* Lower 32 bits of the TSF, snapshot of this value when transmission
* of the PPDU containing the frame finished.
* OR
* Lower 32 bits of the TSF, snapshot of this value when transmission
* of the PPDU containing the frame started.
* <legal all>
*/
A_UINT32 ppdu_transmission_tsf;
/* NOTE:
* To preserve backwards compatibility,
* no new fields can be added in this struct.
*/
};
/* member definitions of htt_t2h_tx_rate_stats_info */
#define HTT_TX_RATE_STATS_INFO_VALID_M 0x00000001
#define HTT_TX_RATE_STATS_INFO_VALID_S 0
#define HTT_TX_RATE_STATS_INFO_VALID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_RATE_STATS_INFO_VALID, value); \
(word) |= (value) << HTT_TX_RATE_STATS_INFO_VALID_S; \
} while (0)
#define HTT_TX_RATE_STATS_INFO_VALID_GET(word) \
(((word) & HTT_TX_RATE_STATS_INFO_VALID_M) >> HTT_TX_RATE_STATS_INFO_VALID_S)
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_BW_M 0x0000000E
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_BW_S 1
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_BW_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_RATE_STATS_INFO_TRANSMIT_BW, value); \
(word) |= (value) << HTT_TX_RATE_STATS_INFO_TRANSMIT_BW_S; \
} while (0)
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_BW_GET(word) \
(((word) & HTT_TX_RATE_STATS_INFO_TRANSMIT_BW_M) >> HTT_TX_RATE_STATS_INFO_TRANSMIT_BW_S)
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_PKT_TYPE_M 0x000000F0
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_PKT_TYPE_S 4
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_PKT_TYPE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_RATE_STATS_INFO_TRANSMIT_PKT_TYPE, value); \
(word) |= (value) << HTT_TX_RATE_STATS_INFO_TRANSMIT_PKT_TYPE_S; \
} while (0)
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_PKT_TYPE_GET(word) \
(((word) & HTT_TX_RATE_STATS_INFO_TRANSMIT_PKT_TYPE_M) >> HTT_TX_RATE_STATS_INFO_TRANSMIT_PKT_TYPE_S)
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_STBC_M 0x00000100
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_STBC_S 8
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_STBC_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_RATE_STATS_INFO_TRANSMIT_STBC, value); \
(word) |= (value) << HTT_TX_RATE_STATS_INFO_TRANSMIT_STBC_S; \
} while (0)
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_STBC_GET(word) \
(((word) & HTT_TX_RATE_STATS_INFO_TRANSMIT_STBC_M) >> HTT_TX_RATE_STATS_INFO_TRANSMIT_STBC_S)
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_LDPC_M 0x00000200
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_LDPC_S 9
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_LDPC_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_RATE_STATS_INFO_TRANSMIT_LDPC, value); \
(word) |= (value) << HTT_TX_RATE_STATS_INFO_TRANSMIT_LDPC_S; \
} while (0)
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_LDPC_GET(word) \
(((word) & HTT_TX_RATE_STATS_INFO_TRANSMIT_LDPC_M) >> HTT_TX_RATE_STATS_INFO_TRANSMIT_LDPC_S)
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_SGI_M 0x00000C00
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_SGI_S 10
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_SGI_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_RATE_STATS_INFO_TRANSMIT_SGI, value); \
(word) |= (value) << HTT_TX_RATE_STATS_INFO_TRANSMIT_SGI_S; \
} while (0)
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_SGI_GET(word) \
(((word) & HTT_TX_RATE_STATS_INFO_TRANSMIT_SGI_M) >> HTT_TX_RATE_STATS_INFO_TRANSMIT_SGI_S)
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_MCS_M 0x0000F000
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_MCS_S 12
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_MCS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_RATE_STATS_INFO_TRANSMIT_MCS, value); \
(word) |= (value) << HTT_TX_RATE_STATS_INFO_TRANSMIT_MCS_S; \
} while (0)
#define HTT_TX_RATE_STATS_INFO_TRANSMIT_MCS_GET(word) \
(((word) & HTT_TX_RATE_STATS_INFO_TRANSMIT_MCS_M) >> HTT_TX_RATE_STATS_INFO_TRANSMIT_MCS_S)
#define HTT_TX_RATE_STATS_INFO_OFDMA_TRANSMISSION_M 0x00010000
#define HTT_TX_RATE_STATS_INFO_OFDMA_TRANSMISSION_S 16
#define HTT_TX_RATE_STATS_INFO_OFDMA_TRANSMISSION_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_RATE_STATS_INFO_OFDMA_TRANSMISSION, value); \
(word) |= (value) << HTT_TX_RATE_STATS_INFO_OFDMA_TRANSMISSION_S; \
} while (0)
#define HTT_TX_RATE_STATS_INFO_OFDMA_TRANSMISSION_GET(word) \
(((word) & HTT_TX_RATE_STATS_INFO_OFDMA_TRANSMISSION_M) >> HTT_TX_RATE_STATS_INFO_OFDMA_TRANSMISSION_S)
#define HTT_TX_RATE_STATS_INFO_TONES_IN_RU_M 0x1FFE0000
#define HTT_TX_RATE_STATS_INFO_TONES_IN_RU_S 17
#define HTT_TX_RATE_STATS_INFO_TONES_IN_RU_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_RATE_STATS_INFO_TONES_IN_RU, value); \
(word) |= (value) << HTT_TX_RATE_STATS_INFO_TONES_IN_RU_S; \
} while (0)
#define HTT_TX_RATE_STATS_INFO_TONES_IN_RU_GET(word) \
(((word) & HTT_TX_RATE_STATS_INFO_TONES_IN_RU_M) >> HTT_TX_RATE_STATS_INFO_TONES_IN_RU_S)
#define HTT_TX_RATE_STATS_INFO_PPDU_TRANSMISSION_TSF_M 0xFFFFFFFF
#define HTT_TX_RATE_STATS_INFO_PPDU_TRANSMISSION_TSF_S 0
#define HTT_TX_RATE_STATS_INFO_PPDU_TRANSMISSION_TSF_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_RATE_STATS_INFO_PPDU_TRANSMISSION_TSF, value); \
(word) |= (value) << HTT_TX_RATE_STATS_INFO_PPDU_TRANSMISSION_TSF_S; \
} while (0)
#define HTT_TX_RATE_STATS_INFO_PPDU_TRANSMISSION_TSF_GET(word) \
(((word) & HTT_TX_RATE_STATS_INFO_PPDU_TRANSMISSION_TSF_M) >> HTT_TX_RATE_STATS_INFO_PPDU_TRANSMISSION_TSF_S)
struct htt_t2h_tx_msdu_info { /* 8 words */
/* words 0 + 1 */
struct htt_t2h_tx_buffer_addr_info addr_info;
/* word 2 */
A_UINT32
sw_peer_id : 16,
tid : 4,
transmit_cnt : 7,
valid : 1,
mcast : 1,
rsvd0 : 3;
/* word 3 */
A_UINT32
release_reason : 4, /* Refer to htt_t2h_tx_msdu_release_reason_e */
tqm_status_number : 24,
frame_type : 4; /* holds htt_tx_wbm_status_frame_type value */
/* word 4 */
A_UINT32
/* ack_frame_rssi:
* If this frame is removed as the result of the
* reception of an ACK or BA, this field indicates
* the RSSI of the received ACK or BA frame.
* When the frame is removed as result of a direct
* remove command from the SW, this field is set
* to 0x0 (which is never a valid value when real
* RSSI is available).
* Units: dB w.r.t noise floor
*/
ack_frame_rssi : 8,
first_msdu : 1,
last_msdu : 1,
msdu_part_of_amsdu : 1,
buffer_timestamp : 19, /* units = TU = 1024 microseconds */
rsvd1 : 2;
/* words 5 + 6 */
struct htt_t2h_tx_rate_stats_info tx_rate_stats;
/* word 7 */
/* rsvd3:
* backup reserved field to add new parameters if [rsvd0, rsvd1, rsvd2]
* is not sufficient
*/
A_UINT32 rsvd3;
/* NOTE:
* To preserve backwards compatibility,
* no new fields can be added in this struct.
*/
};
/* member definitions of htt_t2h_tx_msdu_info */
#define HTT_TX_MSDU_INFO_SW_PEER_ID_M 0x0000FFFF
#define HTT_TX_MSDU_INFO_SW_PEER_ID_S 0
#define HTT_TX_MSDU_INFO_SW_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_SW_PEER_ID, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_SW_PEER_ID_S; \
} while (0)
#define HTT_TX_MSDU_INFO_SW_PEER_ID_GET(word) \
(((word) & HTT_TX_MSDU_INFO_SW_PEER_ID_M) >> HTT_TX_MSDU_INFO_SW_PEER_ID_S)
#define HTT_TX_MSDU_INFO_TID_M 0x000F0000
#define HTT_TX_MSDU_INFO_TID_S 16
#define HTT_TX_MSDU_INFO_TID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_TID, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_TID_S; \
} while (0)
#define HTT_TX_MSDU_INFO_TID_GET(word) \
(((word) & HTT_TX_MSDU_INFO_TID_M) >> HTT_TX_MSDU_INFO_TID_S)
#define HTT_TX_MSDU_INFO_TRANSMIT_CNT_M 0x07F00000
#define HTT_TX_MSDU_INFO_TRANSMIT_CNT_S 20
#define HTT_TX_MSDU_INFO_TRANSMIT_CNT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_TRANSMIT_CNT, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_TRANSMIT_CNT_S; \
} while (0)
#define HTT_TX_MSDU_INFO_TRANSMIT_CNT_GET(word) \
(((word) & HTT_TX_MSDU_INFO_TRANSMIT_CNT_M) >> HTT_TX_MSDU_INFO_TRANSMIT_CNT_S)
#define HTT_TX_MSDU_INFO_VALID_M 0x08000000
#define HTT_TX_MSDU_INFO_VALID_S 27
#define HTT_TX_MSDU_INFO_VALID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_VALID, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_VALID_S; \
} while (0)
#define HTT_TX_MSDU_INFO_VALID_GET(word) \
(((word) & HTT_TX_MSDU_INFO_VALID_M) >> HTT_TX_MSDU_INFO_VALID_S)
#define HTT_TX_MSDU_INFO_MCAST_M 0x10000000
#define HTT_TX_MSDU_INFO_MCAST_S 28
#define HTT_TX_MSDU_INFO_MCAST_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_MCAST, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_MCAST_S; \
} while (0)
#define HTT_TX_MSDU_INFO_MCAST_GET(word) \
(((word) & HTT_TX_MSDU_INFO_MCAST_M) >> HTT_TX_MSDU_INFO_MCAST_S)
#define HTT_TX_MSDU_INFO_RELEASE_REASON_M 0x0000000F
#define HTT_TX_MSDU_INFO_RELEASE_REASON_S 0
#define HTT_TX_MSDU_INFO_RELEASE_REASON_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_RELEASE_REASON, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_RELEASE_REASON_S; \
} while (0)
#define HTT_TX_MSDU_INFO_RELEASE_REASON_GET(word) \
(((word) & HTT_TX_MSDU_INFO_RELEASE_REASON_M) >> HTT_TX_MSDU_INFO_RELEASE_REASON_S)
#define HTT_TX_MSDU_INFO_TQM_STATUS_NUMBER_M 0x0FFFFFF0
#define HTT_TX_MSDU_INFO_TQM_STATUS_NUMBER_S 4
#define HTT_TX_MSDU_INFO_TQM_STATUS_NUMBER_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_TQM_STATUS_NUMBER, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_TQM_STATUS_NUMBER_S; \
} while (0)
#define HTT_TX_MSDU_INFO_TQM_STATUS_NUMBER_GET(word) \
(((word) & HTT_TX_MSDU_INFO_TQM_STATUS_NUMBER_M) >> HTT_TX_MSDU_INFO_TQM_STATUS_NUMBER_S)
#define HTT_TX_MSDU_INFO_FRAME_TYPE_M 0xF0000000
#define HTT_TX_MSDU_INFO_FRAME_TYPE_S 28
#define HTT_TX_MSDU_INFO_FRAME_TYPE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_FRAME_TYPE, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_FRAME_TYPE_S; \
} while (0)
#define HTT_TX_MSDU_INFO_FRAME_TYPE_GET(word) \
(((word) & HTT_TX_MSDU_INFO_FRAME_TYPE_M) >> HTT_TX_MSDU_INFO_FRAME_TYPE_S)
#define HTT_TX_MSDU_INFO_ACK_FRAME_RSSI_M 0x000000FF
#define HTT_TX_MSDU_INFO_ACK_FRAME_RSSI_S 0
#define HTT_TX_MSDU_INFO_ACK_FRAME_RSSI_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_ACK_FRAME_RSSI, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_ACK_FRAME_RSSI_S; \
} while (0)
#define HTT_TX_MSDU_INFO_ACK_FRAME_RSSI_GET(word) \
(((word) & HTT_TX_MSDU_INFO_ACK_FRAME_RSSI_M) >> HTT_TX_MSDU_INFO_ACK_FRAME_RSSI_S)
#define HTT_TX_MSDU_INFO_FIRST_MSDU_M 0x00000100
#define HTT_TX_MSDU_INFO_FIRST_MSDU_S 8
#define HTT_TX_MSDU_INFO_FIRST_MSDU_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_FIRST_MSDU, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_FIRST_MSDU_S; \
} while (0)
#define HTT_TX_MSDU_INFO_FIRST_MSDU_GET(word) \
(((word) & HTT_TX_MSDU_INFO_FIRST_MSDU_M) >> HTT_TX_MSDU_INFO_FIRST_MSDU_S)
#define HTT_TX_MSDU_INFO_LAST_MSDU_M 0x00000200
#define HTT_TX_MSDU_INFO_LAST_MSDU_S 9
#define HTT_TX_MSDU_INFO_LAST_MSDU_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_LAST_MSDU, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_LAST_MSDU_S; \
} while (0)
#define HTT_TX_MSDU_INFO_LAST_MSDU_GET(word) \
(((word) & HTT_TX_MSDU_INFO_LAST_MSDU_M) >> HTT_TX_MSDU_INFO_LAST_MSDU_S)
#define HTT_TX_MSDU_INFO_MSDU_PART_OF_AMSDU_M 0x00000400
#define HTT_TX_MSDU_INFO_MSDU_PART_OF_AMSDU_S 10
#define HTT_TX_MSDU_INFO_MSDU_PART_OF_AMSDU_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_MSDU_PART_OF_AMSDU, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_MSDU_PART_OF_AMSDU_S; \
} while (0)
#define HTT_TX_MSDU_INFO_MSDU_PART_OF_AMSDU_GET(word) \
(((word) & HTT_TX_MSDU_INFO_MSDU_PART_OF_AMSDU_M) >> HTT_TX_MSDU_INFO_MSDU_PART_OF_AMSDU_S)
#define HTT_TX_MSDU_INFO_BUFFER_TIMESTAMP_M 0x3FFFF800
#define HTT_TX_MSDU_INFO_BUFFER_TIMESTAMP_S 11
#define HTT_TX_MSDU_INFO_BUFFER_TIMESTAMP_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MSDU_INFO_BUFFER_TIMESTAMP, value); \
(word) |= (value) << HTT_TX_MSDU_INFO_BUFFER_TIMESTAMP_S; \
} while (0)
#define HTT_TX_MSDU_INFO_BUFFER_TIMESTAMP_GET(word) \
(((word) & HTT_TX_MSDU_INFO_BUFFER_TIMESTAMP_M) >> HTT_TX_MSDU_INFO_BUFFER_TIMESTAMP_S)
struct htt_t2h_soft_umac_tx_compl_ind {
A_UINT32 msg_type : 8, /* HTT_T2H_MSG_TYPE_SOFT_UMAC_TX_COMPL_IND */
msdu_cnt : 8, /* min: 0, max: 255 */
rsvd0 : 16;
/* NOTE:
* To preserve backwards compatibility,
* no new fields can be added in this struct.
*/
/*
* append here:
* struct htt_t2h_tx_msdu_info payload[1(or more)]
* for all the msdu's that are part of this completion.
*/
};
/* member definitions of htt_t2h_soft_umac_tx_compl_ind */
#define HTT_SOFT_UMAC_TX_COMP_IND_MSDU_COUNT_M 0x0000FF00
#define HTT_SOFT_UMAC_TX_COMP_IND_MSDU_COUNT_S 8
#define HTT_SOFT_UMAC_TX_COMP_IND_MSDU_COUNT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_SOFT_UMAC_TX_COMP_IND_MSDU_COUNT, value); \
(word) |= (value) << HTT_SOFT_UMAC_TX_COMP_IND_MSDU_COUNT_S; \
} while (0)
#define HTT_SOFT_UMAC_TX_COMP_IND_MSDU_COUNT_GET(word) \
(((word) & HTT_SOFT_UMAC_TX_COMP_IND_MSDU_COUNT_M) >> HTT_SOFT_UMAC_TX_COMP_IND_MSDU_COUNT_S)
/**
* @brief target -> host rate-control update indication message
*
* DEPRECATED (DEPRECATED_HTT_T2H_MSG_TYPE_RC_UPDATE_IND)
*
* @details
* The following diagram shows the format of the RC Update message
* sent from the target to the host, while processing the tx-completion
* of a transmitted PPDU.
*
* |31 24|23 16|15 8|7 0|
* |-------------------------------------------------------------|
* | peer ID | vdev ID | msg_type |
* |-------------------------------------------------------------|
* | MAC addr 3 | MAC addr 2 | MAC addr 1 | MAC addr 0 |
* |-------------------------------------------------------------|
* | reserved | num elems | MAC addr 5 | MAC addr 4 |
* |-------------------------------------------------------------|
* | : |
* : HTT_RC_TX_DONE_PARAMS (DWORD-aligned) :
* | : |
* |-------------------------------------------------------------|
* | : |
* : HTT_RC_TX_DONE_PARAMS (DWORD-aligned) :
* | : |
* |-------------------------------------------------------------|
* : :
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
*
*/
typedef struct {
A_UINT32 rate_code; /* rate code, bw, chain mask sgi */
A_UINT32 rate_code_flags;
A_UINT32 flags; /* Encodes information such as excessive
retransmission, aggregate, some info
from .11 frame control,
STBC, LDPC, (SGI and Tx Chain Mask
are encoded in ptx_rc->flags field),
AMPDU truncation (BT/time based etc.),
RTS/CTS attempt */
A_UINT32 num_enqued; /* # of MPDUs (for non-AMPDU 1) for this rate */
A_UINT32 num_retries; /* Total # of transmission attempt for this rate */
A_UINT32 num_failed; /* # of failed MPDUs in A-MPDU, 0 otherwise */
A_UINT32 ack_rssi; /* ACK RSSI: b'7..b'0 avg RSSI across all chain */
A_UINT32 time_stamp ; /* ACK timestamp (helps determine age) */
A_UINT32 is_probe; /* Valid if probing. Else, 0 */
} HTT_RC_TX_DONE_PARAMS;
#define HTT_RC_UPDATE_CTXT_SZ (sizeof(HTT_RC_TX_DONE_PARAMS)) /* bytes */
#define HTT_RC_UPDATE_HDR_SZ (12) /* bytes */
#define HTT_RC_UPDATE_MAC_ADDR_OFFSET (4) /* bytes */
#define HTT_RC_UPDATE_MAC_ADDR_LENGTH IEEE80211_ADDR_LEN /* bytes */
#define HTT_RC_UPDATE_VDEVID_S 8
#define HTT_RC_UPDATE_VDEVID_M 0xff00
#define HTT_RC_UPDATE_PEERID_S 16
#define HTT_RC_UPDATE_PEERID_M 0xffff0000
#define HTT_RC_UPDATE_NUM_ELEMS_S 16
#define HTT_RC_UPDATE_NUM_ELEMS_M 0x00ff0000
#define HTT_RC_UPDATE_VDEVID_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RC_UPDATE_VDEVID, _val); \
((_info) |= ((_val) << HTT_RC_UPDATE_VDEVID_S)); \
} while (0)
#define HTT_RC_UPDATE_VDEVID_GET(_info) \
(((_info) & HTT_RC_UPDATE_VDEVID_M) >> HTT_RC_UPDATE_VDEVID_S)
#define HTT_RC_UPDATE_PEERID_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RC_UPDATE_PEERID, _val); \
((_info) |= ((_val) << HTT_RC_UPDATE_PEERID_S)); \
} while (0)
#define HTT_RC_UPDATE_PEERID_GET(_info) \
(((_info) & HTT_RC_UPDATE_PEERID_M) >> HTT_RC_UPDATE_PEERID_S)
#define HTT_RC_UPDATE_NUM_ELEMS_SET(_info, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RC_UPDATE_NUM_ELEMS, _val); \
((_info) |= ((_val) << HTT_RC_UPDATE_NUM_ELEMS_S)); \
} while (0)
#define HTT_RC_UPDATE_NUM_ELEMS_GET(_info) \
(((_info) & HTT_RC_UPDATE_NUM_ELEMS_M) >> HTT_RC_UPDATE_NUM_ELEMS_S)
/**
* @brief target -> host rx fragment indication message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_FRAG_IND
*
* @details
* The following field definitions describe the format of the rx fragment
* indication message sent from the target to the host.
* The rx fragment indication message shares the format of the
* rx indication message, but not all fields from the rx indication message
* are relevant to the rx fragment indication message.
*
*
* |31 24|23 18|17|16|15|14|13|12|11|10|9|8|7|6|5|4 0|
* |-----------+-------------------+---------------------+-------------|
* | peer ID | |FV| ext TID | msg type |
* |-------------------------------------------------------------------|
* | | flush | flush |
* | | end | start |
* | | seq num | seq num |
* |-------------------------------------------------------------------|
* | reserved | FW rx desc bytes |
* |-------------------------------------------------------------------|
* | | FW MSDU Rx |
* | | desc B0 |
* |-------------------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an rx fragment indication message
* Value: 0xa (HTT_T2H_MSG_TYPE_RX_FRAG_IND)
* - EXT_TID
* Bits 12:8
* Purpose: identify the traffic ID of the rx data, including
* special "extended" TID values for multicast, broadcast, and
* non-QoS data frames
* Value: 0-15 for regular TIDs, or >= 16 for bcast/mcast/non-QoS
* - FLUSH_VALID (FV)
* Bit 13
* Purpose: indicate whether the flush IE (start/end sequence numbers)
* is valid
* Value:
* 1 -> flush IE is valid and needs to be processed
* 0 -> flush IE is not valid and should be ignored
* - PEER_ID
* Bits 31:16
* Purpose: Identify, by ID, which peer sent the rx data
* Value: ID of the peer who sent the rx data
* - FLUSH_SEQ_NUM_START
* Bits 5:0
* Purpose: Indicate the start of a series of MPDUs to flush
* Not all MPDUs within this series are necessarily valid - the host
* must check each sequence number within this range to see if the
* corresponding MPDU is actually present.
* This field is only valid if the FV bit is set.
* Value:
* The sequence number for the first MPDUs to check to flush.
* The sequence number is masked by 0x3f.
* - FLUSH_SEQ_NUM_END
* Bits 11:6
* Purpose: Indicate the end of a series of MPDUs to flush
* Value:
* The sequence number one larger than the sequence number of the
* last MPDU to check to flush.
* The sequence number is masked by 0x3f.
* Not all MPDUs within this series are necessarily valid - the host
* must check each sequence number within this range to see if the
* corresponding MPDU is actually present.
* This field is only valid if the FV bit is set.
* Rx descriptor fields:
* - FW_RX_DESC_BYTES
* Bits 15:0
* Purpose: Indicate how many bytes in the Rx indication are used for
* FW Rx descriptors
* Value: 1
*/
#define HTT_RX_FRAG_IND_HDR_PREFIX_SIZE32 2
#define HTT_RX_FRAG_IND_FW_DESC_BYTE_OFFSET 12
#define HTT_RX_FRAG_IND_EXT_TID_SET HTT_RX_IND_EXT_TID_SET
#define HTT_RX_FRAG_IND_EXT_TID_GET HTT_RX_IND_EXT_TID_GET
#define HTT_RX_FRAG_IND_PEER_ID_SET HTT_RX_IND_PEER_ID_SET
#define HTT_RX_FRAG_IND_PEER_ID_GET HTT_RX_IND_PEER_ID_GET
#define HTT_RX_FRAG_IND_FLUSH_VALID_SET HTT_RX_IND_FLUSH_VALID_SET
#define HTT_RX_FRAG_IND_FLUSH_VALID_GET HTT_RX_IND_FLUSH_VALID_GET
#define HTT_RX_FRAG_IND_FLUSH_SEQ_NUM_START_SET \
HTT_RX_IND_FLUSH_SEQ_NUM_START_SET
#define HTT_RX_FRAG_IND_FLUSH_SEQ_NUM_START_GET \
HTT_RX_IND_FLUSH_SEQ_NUM_START_GET
#define HTT_RX_FRAG_IND_FLUSH_SEQ_NUM_END_SET \
HTT_RX_IND_FLUSH_SEQ_NUM_END_SET
#define HTT_RX_FRAG_IND_FLUSH_SEQ_NUM_END_GET \
HTT_RX_IND_FLUSH_SEQ_NUM_END_GET
#define HTT_RX_FRAG_IND_FW_RX_DESC_BYTES_GET HTT_RX_IND_FW_RX_DESC_BYTES_GET
#define HTT_RX_FRAG_IND_BYTES \
(4 /* msg hdr */ + \
4 /* flush spec */ + \
4 /* (unused) FW rx desc bytes spec */ + \
4 /* FW rx desc */)
/**
* @brief target -> host test message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_TEST
*
* @details
* The following field definitions describe the format of the test
* message sent from the target to the host.
* The message consists of a 4-octet header, followed by a variable
* number of 32-bit integer values, followed by a variable number
* of 8-bit character values.
*
* |31 16|15 8|7 0|
* |-----------------------------------------------------------|
* | num chars | num ints | msg type |
* |-----------------------------------------------------------|
* | int 0 |
* |-----------------------------------------------------------|
* | int 1 |
* |-----------------------------------------------------------|
* | ... |
* |-----------------------------------------------------------|
* | char 3 | char 2 | char 1 | char 0 |
* |-----------------------------------------------------------|
* | | | ... | char 4 |
* |-----------------------------------------------------------|
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a test message
* Value: HTT_MSG_TYPE_TEST
* - NUM_INTS
* Bits 15:8
* Purpose: indicate how many 32-bit integers follow the message header
* - NUM_CHARS
* Bits 31:16
* Purpose: indicate how many 8-bit characters follow the series of integers
*/
#define HTT_RX_TEST_NUM_INTS_M 0xff00
#define HTT_RX_TEST_NUM_INTS_S 8
#define HTT_RX_TEST_NUM_CHARS_M 0xffff0000
#define HTT_RX_TEST_NUM_CHARS_S 16
#define HTT_RX_TEST_NUM_INTS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_TEST_NUM_INTS, value); \
(word) |= (value) << HTT_RX_TEST_NUM_INTS_S; \
} while (0)
#define HTT_RX_TEST_NUM_INTS_GET(word) \
(((word) & HTT_RX_TEST_NUM_INTS_M) >> HTT_RX_TEST_NUM_INTS_S)
#define HTT_RX_TEST_NUM_CHARS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_TEST_NUM_CHARS, value); \
(word) |= (value) << HTT_RX_TEST_NUM_CHARS_S; \
} while (0)
#define HTT_RX_TEST_NUM_CHARS_GET(word) \
(((word) & HTT_RX_TEST_NUM_CHARS_M) >> HTT_RX_TEST_NUM_CHARS_S)
/**
* @brief target -> host packet log message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_PKTLOG
*
* @details
* The following field definitions describe the format of the packet log
* message sent from the target to the host.
* The message consists of a 4-octet header,followed by a variable number
* of 32-bit character values.
*
* |31 16|15 12|11 10|9 8|7 0|
* |------------------------------------------------------------------|
* | payload_size | rsvd |pdev_id|mac_id| msg type |
* |------------------------------------------------------------------|
* | payload |
* |------------------------------------------------------------------|
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a pktlog message
* Value: 0x8 (HTT_T2H_MSG_TYPE_PKTLOG)
* - mac_id
* Bits 9:8
* Purpose: identifies which MAC/PHY instance generated this pktlog info
* Value: 0-3
* - pdev_id
* Bits 11:10
* Purpose: pdev_id
* Value: 0-3
* 0 (for rings at SOC level),
* 1/2/3 PDEV -> 0/1/2
* - payload_size
* Bits 31:16
* Purpose: explicitly specify the payload size
* Value: payload size in bytes (payload size is a multiple of 4 bytes)
*/
PREPACK struct htt_pktlog_msg {
A_UINT32 header;
A_UINT32 payload[1/* or more */];
} POSTPACK;
#define HTT_T2H_PKTLOG_MAC_ID_M 0x00000300
#define HTT_T2H_PKTLOG_MAC_ID_S 8
#define HTT_T2H_PKTLOG_PDEV_ID_M 0x00000C00
#define HTT_T2H_PKTLOG_PDEV_ID_S 10
#define HTT_T2H_PKTLOG_PAYLOAD_SIZE_M 0xFFFF0000
#define HTT_T2H_PKTLOG_PAYLOAD_SIZE_S 16
#define HTT_T2H_PKTLOG_MAC_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_PKTLOG_MAC_ID, value); \
(word) |= (value) << HTT_T2H_PKTLOG_MAC_ID_S; \
} while (0)
#define HTT_T2H_PKTLOG_MAC_ID_GET(word) \
(((word) & HTT_T2H_PKTLOG_MAC_ID_M) >> \
HTT_T2H_PKTLOG_MAC_ID_S)
#define HTT_T2H_PKTLOG_PDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_PKTLOG_PDEV_ID, value); \
(word) |= (value) << HTT_T2H_PKTLOG_PDEV_ID_S; \
} while (0)
#define HTT_T2H_PKTLOG_PDEV_ID_GET(word) \
(((word) & HTT_T2H_PKTLOG_PDEV_ID_M) >> \
HTT_T2H_PKTLOG_PDEV_ID_S)
#define HTT_T2H_PKTLOG_PAYLOAD_SIZE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_PKTLOG_PAYLOAD_SIZE, value); \
(word) |= (value) << HTT_T2H_PKTLOG_PAYLOAD_SIZE_S; \
} while (0)
#define HTT_T2H_PKTLOG_PAYLOAD_SIZE_GET(word) \
(((word) & HTT_T2H_PKTLOG_PAYLOAD_SIZE_M) >> \
HTT_T2H_PKTLOG_PAYLOAD_SIZE_S)
/*
* Rx reorder statistics
* NB: all the fields must be defined in 4 octets size.
*/
struct rx_reorder_stats {
/* Non QoS MPDUs received */
A_UINT32 deliver_non_qos;
/* MPDUs received in-order */
A_UINT32 deliver_in_order;
/* Flush due to reorder timer expired */
A_UINT32 deliver_flush_timeout;
/* Flush due to move out of window */
A_UINT32 deliver_flush_oow;
/* Flush due to DELBA */
A_UINT32 deliver_flush_delba;
/* MPDUs dropped due to FCS error */
A_UINT32 fcs_error;
/* MPDUs dropped due to monitor mode non-data packet */
A_UINT32 mgmt_ctrl;
/* Unicast-data MPDUs dropped due to invalid peer */
A_UINT32 invalid_peer;
/* MPDUs dropped due to duplication (non aggregation) */
A_UINT32 dup_non_aggr;
/* MPDUs dropped due to processed before */
A_UINT32 dup_past;
/* MPDUs dropped due to duplicate in reorder queue */
A_UINT32 dup_in_reorder;
/* Reorder timeout happened */
A_UINT32 reorder_timeout;
/* invalid bar ssn */
A_UINT32 invalid_bar_ssn;
/* reorder reset due to bar ssn */
A_UINT32 ssn_reset;
/* Flush due to delete peer */
A_UINT32 deliver_flush_delpeer;
/* Flush due to offload*/
A_UINT32 deliver_flush_offload;
/* Flush due to out of buffer*/
A_UINT32 deliver_flush_oob;
/* MPDUs dropped due to PN check fail */
A_UINT32 pn_fail;
/* MPDUs dropped due to unable to allocate memory */
A_UINT32 store_fail;
/* Number of times the tid pool alloc succeeded */
A_UINT32 tid_pool_alloc_succ;
/* Number of times the MPDU pool alloc succeeded */
A_UINT32 mpdu_pool_alloc_succ;
/* Number of times the MSDU pool alloc succeeded */
A_UINT32 msdu_pool_alloc_succ;
/* Number of times the tid pool alloc failed */
A_UINT32 tid_pool_alloc_fail;
/* Number of times the MPDU pool alloc failed */
A_UINT32 mpdu_pool_alloc_fail;
/* Number of times the MSDU pool alloc failed */
A_UINT32 msdu_pool_alloc_fail;
/* Number of times the tid pool freed */
A_UINT32 tid_pool_free;
/* Number of times the MPDU pool freed */
A_UINT32 mpdu_pool_free;
/* Number of times the MSDU pool freed */
A_UINT32 msdu_pool_free;
/* number of MSDUs undelivered to HTT and queued to Data Rx MSDU free list*/
A_UINT32 msdu_queued;
/* Number of MSDUs released from Data Rx MSDU list to MAC ring */
A_UINT32 msdu_recycled;
/* Number of MPDUs with invalid peer but A2 found in AST */
A_UINT32 invalid_peer_a2_in_ast;
/* Number of MPDUs with invalid peer but A3 found in AST */
A_UINT32 invalid_peer_a3_in_ast;
/* Number of MPDUs with invalid peer, Broadcast or Multicast frame */
A_UINT32 invalid_peer_bmc_mpdus;
/* Number of MSDUs with err attention word */
A_UINT32 rxdesc_err_att;
/* Number of MSDUs with flag of peer_idx_invalid */
A_UINT32 rxdesc_err_peer_idx_inv;
/* Number of MSDUs with flag of peer_idx_timeout */
A_UINT32 rxdesc_err_peer_idx_to;
/* Number of MSDUs with flag of overflow */
A_UINT32 rxdesc_err_ov;
/* Number of MSDUs with flag of msdu_length_err */
A_UINT32 rxdesc_err_msdu_len;
/* Number of MSDUs with flag of mpdu_length_err */
A_UINT32 rxdesc_err_mpdu_len;
/* Number of MSDUs with flag of tkip_mic_err */
A_UINT32 rxdesc_err_tkip_mic;
/* Number of MSDUs with flag of decrypt_err */
A_UINT32 rxdesc_err_decrypt;
/* Number of MSDUs with flag of fcs_err */
A_UINT32 rxdesc_err_fcs;
/* Number of Unicast (bc_mc bit is not set in attention word)
* frames with invalid peer handler
*/
A_UINT32 rxdesc_uc_msdus_inv_peer;
/* Number of unicast frame directly (direct bit is set in attention word)
* to DUT with invalid peer handler
*/
A_UINT32 rxdesc_direct_msdus_inv_peer;
/* Number of Broadcast/Multicast (bc_mc bit set in attention word)
* frames with invalid peer handler
*/
A_UINT32 rxdesc_bmc_msdus_inv_peer;
/* Number of MSDUs dropped due to no first MSDU flag */
A_UINT32 rxdesc_no_1st_msdu;
/* Number of MSDUs dropped due to ring overflow */
A_UINT32 msdu_drop_ring_ov;
/* Number of MSDUs dropped due to FC mismatch */
A_UINT32 msdu_drop_fc_mismatch;
/* Number of MSDUs dropped due to mgt frame in Remote ring */
A_UINT32 msdu_drop_mgmt_remote_ring;
/* Number of MSDUs dropped due to errors not reported in attention word */
A_UINT32 msdu_drop_misc;
/* Number of MSDUs go to offload before reorder */
A_UINT32 offload_msdu_wal;
/* Number of data frame dropped by offload after reorder */
A_UINT32 offload_msdu_reorder;
/* Number of MPDUs with sequence number in the past and within the BA window */
A_UINT32 dup_past_within_window;
/* Number of MPDUs with sequence number in the past and outside the BA window */
A_UINT32 dup_past_outside_window;
/* Number of MSDUs with decrypt/MIC error */
A_UINT32 rxdesc_err_decrypt_mic;
/* Number of data MSDUs received on both local and remote rings */
A_UINT32 data_msdus_on_both_rings;
/* MPDUs never filled */
A_UINT32 holes_not_filled;
};
/*
* Rx Remote buffer statistics
* NB: all the fields must be defined in 4 octets size.
*/
struct rx_remote_buffer_mgmt_stats {
/* Total number of MSDUs reaped for Rx processing */
A_UINT32 remote_reaped;
/* MSDUs recycled within firmware */
A_UINT32 remote_recycled;
/* MSDUs stored by Data Rx */
A_UINT32 data_rx_msdus_stored;
/* Number of HTT indications from WAL Rx MSDU */
A_UINT32 wal_rx_ind;
/* Number of unconsumed HTT indications from WAL Rx MSDU */
A_UINT32 wal_rx_ind_unconsumed;
/* Number of HTT indications from Data Rx MSDU */
A_UINT32 data_rx_ind;
/* Number of unconsumed HTT indications from Data Rx MSDU */
A_UINT32 data_rx_ind_unconsumed;
/* Number of HTT indications from ATHBUF */
A_UINT32 athbuf_rx_ind;
/* Number of remote buffers requested for refill */
A_UINT32 refill_buf_req;
/* Number of remote buffers filled by the host */
A_UINT32 refill_buf_rsp;
/* Number of times MAC hw_index = f/w write_index */
A_INT32 mac_no_bufs;
/* Number of times f/w write_index = f/w read_index for MAC Rx ring */
A_INT32 fw_indices_equal;
/* Number of times f/w finds no buffers to post */
A_INT32 host_no_bufs;
};
/*
* TXBF MU/SU packets and NDPA statistics
* NB: all the fields must be defined in 4 octets size.
*/
struct rx_txbf_musu_ndpa_pkts_stats {
A_UINT32 number_mu_pkts; /* number of TXBF MU packets received */
A_UINT32 number_su_pkts; /* number of TXBF SU packets received */
A_UINT32 txbf_directed_ndpa_count; /* number of TXBF directed NDPA */
A_UINT32 txbf_ndpa_retry_count; /* number of TXBF retried NDPA */
A_UINT32 txbf_total_ndpa_count; /* total number of TXBF NDPA */
A_UINT32 reserved[3]; /* must be set to 0x0 */
};
/*
* htt_dbg_stats_status -
* present - The requested stats have been delivered in full.
* This indicates that either the stats information was contained
* in its entirety within this message, or else this message
* completes the delivery of the requested stats info that was
* partially delivered through earlier STATS_CONF messages.
* partial - The requested stats have been delivered in part.
* One or more subsequent STATS_CONF messages with the same
* cookie value will be sent to deliver the remainder of the
* information.
* error - The requested stats could not be delivered, for example due
* to a shortage of memory to construct a message holding the
* requested stats.
* invalid - The requested stat type is either not recognized, or the
* target is configured to not gather the stats type in question.
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
* series_done - This special value indicates that no further stats info
* elements are present within a series of stats info elems
* (within a stats upload confirmation message).
*/
enum htt_dbg_stats_status {
HTT_DBG_STATS_STATUS_PRESENT = 0,
HTT_DBG_STATS_STATUS_PARTIAL = 1,
HTT_DBG_STATS_STATUS_ERROR = 2,
HTT_DBG_STATS_STATUS_INVALID = 3,
HTT_DBG_STATS_STATUS_SERIES_DONE = 7
};
/**
* @brief target -> host statistics upload
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_STATS_CONF
*
* @details
* The following field definitions describe the format of the HTT target
* to host stats upload confirmation message.
* The message contains a cookie echoed from the HTT host->target stats
* upload request, which identifies which request the confirmation is
* for, and a series of tag-length-value stats information elements.
* The tag-length header for each stats info element also includes a
* status field, to indicate whether the request for the stat type in
* question was fully met, partially met, unable to be met, or invalid
* (if the stat type in question is disabled in the target).
* A special value of all 1's in this status field is used to indicate
* the end of the series of stats info elements.
*
*
* |31 16|15 8|7 5|4 0|
* |------------------------------------------------------------|
* | reserved | msg type |
* |------------------------------------------------------------|
* | cookie LSBs |
* |------------------------------------------------------------|
* | cookie MSBs |
* |------------------------------------------------------------|
* | stats entry length | reserved | S |stat type|
* |------------------------------------------------------------|
* | |
* | type-specific stats info |
* | |
* |------------------------------------------------------------|
* | stats entry length | reserved | S |stat type|
* |------------------------------------------------------------|
* | |
* | type-specific stats info |
* | |
* |------------------------------------------------------------|
* | n/a | reserved | 111 | n/a |
* |------------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this is a statistics upload confirmation message
* Value: 0x9 (HTT_T2H_MSG_TYPE_STATS_CONF)
* - COOKIE_LSBS
* Bits 31:0
* Purpose: Provide a mechanism to match a target->host stats confirmation
* message with its preceding host->target stats request message.
* Value: LSBs of the opaque cookie specified by the host-side requestor
* - COOKIE_MSBS
* Bits 31:0
* Purpose: Provide a mechanism to match a target->host stats confirmation
* message with its preceding host->target stats request message.
* Value: MSBs of the opaque cookie specified by the host-side requestor
*
* Stats Information Element tag-length header fields:
* - STAT_TYPE
* Bits 4:0
* Purpose: identifies the type of statistics info held in the
* following information element
* Value: htt_dbg_stats_type
* - STATUS
* Bits 7:5
* Purpose: indicate whether the requested stats are present
* Value: htt_dbg_stats_status, including a special value (0x7) to mark
* the completion of the stats entry series
* - LENGTH
* Bits 31:16
* Purpose: indicate the stats information size
* Value: This field specifies the number of bytes of stats information
* that follows the element tag-length header.
* It is expected but not required that this length is a multiple of
* 4 bytes. Even if the length is not an integer multiple of 4, the
* subsequent stats entry header will begin on a 4-byte aligned
* boundary.
*/
#define HTT_T2H_STATS_COOKIE_SIZE 8
#define HTT_T2H_STATS_CONF_TAIL_SIZE 4
#define HTT_T2H_STATS_CONF_HDR_SIZE 4
#define HTT_T2H_STATS_CONF_TLV_HDR_SIZE 4
#define HTT_T2H_STATS_CONF_TLV_TYPE_M 0x0000001f
#define HTT_T2H_STATS_CONF_TLV_TYPE_S 0
#define HTT_T2H_STATS_CONF_TLV_STATUS_M 0x000000e0
#define HTT_T2H_STATS_CONF_TLV_STATUS_S 5
#define HTT_T2H_STATS_CONF_TLV_LENGTH_M 0xffff0000
#define HTT_T2H_STATS_CONF_TLV_LENGTH_S 16
#define HTT_T2H_STATS_CONF_TLV_TYPE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_STATS_CONF_TLV_TYPE, value); \
(word) |= (value) << HTT_T2H_STATS_CONF_TLV_TYPE_S; \
} while (0)
#define HTT_T2H_STATS_CONF_TLV_TYPE_GET(word) \
(((word) & HTT_T2H_STATS_CONF_TLV_TYPE_M) >> \
HTT_T2H_STATS_CONF_TLV_TYPE_S)
#define HTT_T2H_STATS_CONF_TLV_STATUS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_STATS_CONF_TLV_STATUS, value); \
(word) |= (value) << HTT_T2H_STATS_CONF_TLV_STATUS_S; \
} while (0)
#define HTT_T2H_STATS_CONF_TLV_STATUS_GET(word) \
(((word) & HTT_T2H_STATS_CONF_TLV_STATUS_M) >> \
HTT_T2H_STATS_CONF_TLV_STATUS_S)
#define HTT_T2H_STATS_CONF_TLV_LENGTH_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_STATS_CONF_TLV_LENGTH, value); \
(word) |= (value) << HTT_T2H_STATS_CONF_TLV_LENGTH_S; \
} while (0)
#define HTT_T2H_STATS_CONF_TLV_LENGTH_GET(word) \
(((word) & HTT_T2H_STATS_CONF_TLV_LENGTH_M) >> \
HTT_T2H_STATS_CONF_TLV_LENGTH_S)
#define HL_HTT_FW_RX_DESC_RSVD_SIZE 18
#define HTT_MAX_AGGR 64
#define HTT_HL_MAX_AGGR 18
/**
* @brief host -> target FRAG DESCRIPTOR/MSDU_EXT DESC bank
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG
*
* @details
* The following field definitions describe the format of the HTT host
* to target frag_desc/msdu_ext bank configuration message.
* The message contains the based address and the min and max id of the
* MSDU_EXT/FRAG_DESC that will be used by the HTT to map MSDU DESC and
* MSDU_EXT/FRAG_DESC.
* HTT will use id in HTT descriptor instead sending the frag_desc_ptr.
* In peregrine the firmware will use fragment_desc_ptr but in WIFI2.0
* the hardware does the mapping/translation.
*
* Total banks that can be configured is configured to 16.
*
* This should be called before any TX has be initiated by the HTT
*
* |31 16|15 8|7 5|4 0|
* |------------------------------------------------------------|
* | DESC_SIZE | NUM_BANKS | RES |SWP|pdev| msg type |
* |------------------------------------------------------------|
* | BANK0_BASE_ADDRESS (bits 31:0) |
#if HTT_PADDR64
* | BANK0_BASE_ADDRESS (bits 63:32) |
#endif
* |------------------------------------------------------------|
* | ... |
* |------------------------------------------------------------|
* | BANK15_BASE_ADDRESS (bits 31:0) |
#if HTT_PADDR64
* | BANK15_BASE_ADDRESS (bits 63:32) |
#endif
* |------------------------------------------------------------|
* | BANK0_MAX_ID | BANK0_MIN_ID |
* |------------------------------------------------------------|
* | ... |
* |------------------------------------------------------------|
* | BANK15_MAX_ID | BANK15_MIN_ID |
* |------------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Value: 0x6 (HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG)
* for systems with 64-bit format for bus addresses:
* - BANKx_BASE_ADDRESS_LO
* Bits 31:0
* Purpose: Provide a mechanism to specify the base address of the
* MSDU_EXT bank physical/bus address.
* Value: lower 4 bytes of MSDU_EXT bank physical / bus address
* - BANKx_BASE_ADDRESS_HI
* Bits 31:0
* Purpose: Provide a mechanism to specify the base address of the
* MSDU_EXT bank physical/bus address.
* Value: higher 4 bytes of MSDU_EXT bank physical / bus address
* for systems with 32-bit format for bus addresses:
* - BANKx_BASE_ADDRESS
* Bits 31:0
* Purpose: Provide a mechanism to specify the base address of the
* MSDU_EXT bank physical/bus address.
* Value: MSDU_EXT bank physical / bus address
* - BANKx_MIN_ID
* Bits 15:0
* Purpose: Provide a mechanism to specify the min index that needs to
* mapped.
* - BANKx_MAX_ID
* Bits 31:16
* Purpose: Provide a mechanism to specify the max index that needs to
* mapped.
*
*/
/** @todo Compress the fields to fit MAX HTT Message size, until then configure to a
* safe value.
* @note MAX supported banks is 16.
*/
#define HTT_TX_MSDU_EXT_BANK_MAX 4
#define HTT_H2T_FRAG_DESC_BANK_PDEVID_M 0x300
#define HTT_H2T_FRAG_DESC_BANK_PDEVID_S 8
#define HTT_H2T_FRAG_DESC_BANK_SWAP_M 0x400
#define HTT_H2T_FRAG_DESC_BANK_SWAP_S 10
#define HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_M 0xff0000
#define HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_S 16
#define HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_M 0xff000000
#define HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_S 24
#define HTT_H2T_FRAG_DESC_BANK_MIN_IDX_M 0xffff
#define HTT_H2T_FRAG_DESC_BANK_MIN_IDX_S 0
#define HTT_H2T_FRAG_DESC_BANK_MAX_IDX_M 0xffff0000
#define HTT_H2T_FRAG_DESC_BANK_MAX_IDX_S 16
#define HTT_H2T_FRAG_DESC_BANK_PDEVID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_FRAG_DESC_BANK_PDEVID, value); \
(word) |= ((value) << HTT_H2T_FRAG_DESC_BANK_PDEVID_S); \
} while (0)
#define HTT_H2T_FRAG_DESC_BANK_PDEVID_GET(word) \
(((word) & HTT_H2T_FRAG_DESC_BANK_PDEVID_M) >> HTT_H2T_FRAG_DESC_BANK_PDEVID_S)
#define HTT_H2T_FRAG_DESC_BANK_SWAP_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_FRAG_DESC_BANK_SWAP, value); \
(word) |= ((value) << HTT_H2T_FRAG_DESC_BANK_SWAP_S); \
} while (0)
#define HTT_H2T_FRAG_DESC_BANK_SWAP_GET(word) \
(((word) & HTT_H2T_FRAG_DESC_BANK_SWAP_M) >> HTT_H2T_FRAG_DESC_BANK_SWAP_S)
#define HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_FRAG_DESC_BANK_NUM_BANKS, value); \
(word) |= ((value) << HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_S); \
} while (0)
#define HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_GET(word) \
(((word) & HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_M) >> HTT_H2T_FRAG_DESC_BANK_NUM_BANKS_S)
#define HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_FRAG_DESC_BANK_DESC_SIZE, value); \
(word) |= ((value) << HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_S); \
} while (0)
#define HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_GET(word) \
(((word) & HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_M) >> HTT_H2T_FRAG_DESC_BANK_DESC_SIZE_S)
#define HTT_H2T_FRAG_DESC_BANK_MIN_IDX_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_FRAG_DESC_BANK_MIN_IDX, value); \
(word) |= ((value) << HTT_H2T_FRAG_DESC_BANK_MIN_IDX_S); \
} while (0)
#define HTT_H2T_FRAG_DESC_BANK_MIN_IDX_GET(word) \
(((word) & HTT_H2T_FRAG_DESC_BANK_MIN_IDX_M) >> HTT_H2T_FRAG_DESC_BANK_MIN_IDX_S)
#define HTT_H2T_FRAG_DESC_BANK_MAX_IDX_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_H2T_FRAG_DESC_BANK_MAX_IDX, value); \
(word) |= ((value) << HTT_H2T_FRAG_DESC_BANK_MAX_IDX_S); \
} while (0)
#define HTT_H2T_FRAG_DESC_BANK_MAX_IDX_GET(word) \
(((word) & HTT_H2T_FRAG_DESC_BANK_MAX_IDX_M) >> HTT_H2T_FRAG_DESC_BANK_MAX_IDX_S)
/*
* TEMPLATE_HTT_TX_FRAG_DESC_BANK_CFG_T:
* This macro defines a htt_tx_frag_descXXX_bank_cfg_t in which any physical
* addresses are stored in a XXX-bit field.
* This macro is used to define both htt_tx_frag_desc32_bank_cfg_t and
* htt_tx_frag_desc64_bank_cfg_t structs.
*/
#define TEMPLATE_HTT_TX_FRAG_DESC_BANK_CFG_T( \
_paddr_bits_, \
_paddr__bank_base_address_) \
PREPACK struct htt_tx_frag_desc ## _paddr_bits_ ## _bank_cfg_t { \
/** word 0 \
* msg_type: 8, \
* pdev_id: 2, \
* swap: 1, \
* reserved0: 5, \
* num_banks: 8, \
* desc_size: 8; \
*/ \
A_UINT32 word0; \
/* \
* If bank_base_address is 64 bits, the upper / lower halves are stored \
* in little-endian order (bytes 0-3 in the first A_UINT32, bytes 4-7 in \
* the second A_UINT32). \
*/ \
_paddr__bank_base_address_[HTT_TX_MSDU_EXT_BANK_MAX]; \
A_UINT32 bank_info[HTT_TX_MSDU_EXT_BANK_MAX]; \
} POSTPACK
/* define htt_tx_frag_desc32_bank_cfg_t */
TEMPLATE_HTT_TX_FRAG_DESC_BANK_CFG_T(32, HTT_VAR_PADDR32(bank_base_address));
/* define htt_tx_frag_desc64_bank_cfg_t */
TEMPLATE_HTT_TX_FRAG_DESC_BANK_CFG_T(64, HTT_VAR_PADDR64_LE(bank_base_address));
/*
* Make htt_tx_frag_desc_bank_cfg_t be an alias for either
* htt_tx_frag_desc32_bank_cfg_t or htt_tx_frag_desc64_bank_cfg_t
*/
#if HTT_PADDR64
#define htt_tx_frag_desc_bank_cfg_t htt_tx_frag_desc64_bank_cfg_t
#else
#define htt_tx_frag_desc_bank_cfg_t htt_tx_frag_desc32_bank_cfg_t
#endif
/**
* @brief target -> host HTT TX Credit total count update message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND
*
*|31 16|15|14 9| 8 |7 0 |
*|---------------------+--+----------+-------+----------|
*|cur htt credit delta | Q| reserved | sign | msg type |
*|------------------------------------------------------|
*
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a htt tx credit delta update message
* Value: 0xf (HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND)
* - SIGN
* Bits 8
* identifies whether credit delta is positive or negative
* Value:
* - 0x0: credit delta is positive, rebalance in some buffers
* - 0x1: credit delta is negative, rebalance out some buffers
* - reserved
* Bits 14:9
* Value: 0x0
* - TXQ_GRP
* Bit 15
* Purpose: indicates whether any tx queue group information elements
* are appended to the tx credit update message
* Value: 0 -> no tx queue group information element is present
* 1 -> a tx queue group information element immediately follows
* - DELTA_COUNT
* Bits 31:16
* Purpose: Specify current htt credit delta absolute count
*/
#define HTT_TX_CREDIT_SIGN_BIT_M 0x00000100
#define HTT_TX_CREDIT_SIGN_BIT_S 8
#define HTT_TX_CREDIT_TXQ_GRP_M 0x00008000
#define HTT_TX_CREDIT_TXQ_GRP_S 15
#define HTT_TX_CREDIT_DELTA_ABS_M 0xffff0000
#define HTT_TX_CREDIT_DELTA_ABS_S 16
#define HTT_TX_CREDIT_SIGN_BIT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_CREDIT_SIGN_BIT, value); \
(word) |= (value) << HTT_TX_CREDIT_SIGN_BIT_S; \
} while (0)
#define HTT_TX_CREDIT_SIGN_BIT_GET(word) \
(((word) & HTT_TX_CREDIT_SIGN_BIT_M) >> HTT_TX_CREDIT_SIGN_BIT_S)
#define HTT_TX_CREDIT_TXQ_GRP_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_CREDIT_TXQ_GRP, value); \
(word) |= (value) << HTT_TX_CREDIT_TXQ_GRP_S; \
} while (0)
#define HTT_TX_CREDIT_TXQ_GRP_GET(word) \
(((word) & HTT_TX_CREDIT_TXQ_GRP_M) >> HTT_TX_CREDIT_TXQ_GRP_S)
#define HTT_TX_CREDIT_DELTA_ABS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_CREDIT_DELTA_ABS, value); \
(word) |= (value) << HTT_TX_CREDIT_DELTA_ABS_S; \
} while (0)
#define HTT_TX_CREDIT_DELTA_ABS_GET(word) \
(((word) & HTT_TX_CREDIT_DELTA_ABS_M) >> HTT_TX_CREDIT_DELTA_ABS_S)
#define HTT_TX_CREDIT_MSG_BYTES 4
#define HTT_TX_CREDIT_SIGN_BIT_POSITIVE 0x0
#define HTT_TX_CREDIT_SIGN_BIT_NEGATIVE 0x1
/**
* @brief HTT WDI_IPA Operation Response Message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE
*
* @details
* HTT WDI_IPA Operation Response message is sent by target
* to host confirming suspend or resume operation.
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | op_code | Rsvd | msg_type |
* |-------------------------------------------------------------------|
* | Rsvd | Response len |
* |-------------------------------------------------------------------|
* | |
* | Response-type specific info |
* | |
* | |
* |-------------------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: Identifies this as WDI_IPA Operation Response message
* value: = 0x14 (HTT_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE)
* - OP_CODE
* Bits 31:16
* Purpose: Identifies the operation target is responding to (e.g. TX suspend)
* value: = enum htt_wdi_ipa_op_code
* - RSP_LEN
* Bits 16:0
* Purpose: length for the response-type specific info
* value: = length in bytes for response-type specific info
* For example, if OP_CODE == HTT_WDI_IPA_OPCODE_DBG_STATS, the
* length value will be sizeof(struct wlan_wdi_ipa_dbg_stats_t).
*/
PREPACK struct htt_wdi_ipa_op_response_t
{
/* DWORD 0: flags and meta-data */
A_UINT32
msg_type: 8, /* HTT_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE */
reserved1: 8,
op_code: 16;
A_UINT32
rsp_len: 16,
reserved2: 16;
} POSTPACK;
#define HTT_WDI_IPA_OP_RESPONSE_SZ 8 /* bytes */
#define HTT_WDI_IPA_OP_RESPONSE_OP_CODE_M 0xffff0000
#define HTT_WDI_IPA_OP_RESPONSE_OP_CODE_S 16
#define HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_M 0x0000ffff
#define HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_S 0
#define HTT_WDI_IPA_OP_RESPONSE_OP_CODE_GET(_var) \
(((_var) & HTT_WDI_IPA_OP_RESPONSE_OP_CODE_M) >> HTT_WDI_IPA_OP_RESPONSE_OP_CODE_S)
#define HTT_WDI_IPA_OP_RESPONSE_OP_CODE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_OP_RESPONSE_OP_CODE, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_OP_RESPONSE_OP_CODE_S)); \
} while (0)
#define HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_GET(_var) \
(((_var) & HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_M) >> HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_S)
#define HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_WDI_IPA_OP_RESPONSE_RSP_LEN, _val); \
((_var) |= ((_val) << HTT_WDI_IPA_OP_RESPONSE_RSP_LEN_S)); \
} while (0)
enum htt_phy_mode {
htt_phy_mode_11a = 0,
htt_phy_mode_11g = 1,
htt_phy_mode_11b = 2,
htt_phy_mode_11g_only = 3,
htt_phy_mode_11na_ht20 = 4,
htt_phy_mode_11ng_ht20 = 5,
htt_phy_mode_11na_ht40 = 6,
htt_phy_mode_11ng_ht40 = 7,
htt_phy_mode_11ac_vht20 = 8,
htt_phy_mode_11ac_vht40 = 9,
htt_phy_mode_11ac_vht80 = 10,
htt_phy_mode_11ac_vht20_2g = 11,
htt_phy_mode_11ac_vht40_2g = 12,
htt_phy_mode_11ac_vht80_2g = 13,
htt_phy_mode_11ac_vht80_80 = 14, /* 80+80 */
htt_phy_mode_11ac_vht160 = 15,
htt_phy_mode_max,
};
/**
* @brief target -> host HTT channel change indication
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_CHAN_CHANGE
*
* @details
* Specify when a channel change occurs.
* This allows the host to precisely determine which rx frames arrived
* on the old channel and which rx frames arrived on the new channel.
*
*|31 |7 0 |
*|-------------------------------------------+----------|
*| reserved | msg type |
*|------------------------------------------------------|
*| primary_chan_center_freq_mhz |
*|------------------------------------------------------|
*| contiguous_chan1_center_freq_mhz |
*|------------------------------------------------------|
*| contiguous_chan2_center_freq_mhz |
*|------------------------------------------------------|
*| phy_mode |
*|------------------------------------------------------|
*
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a htt channel change indication message
* Value: 0x15 (HTT_T2H_MSG_TYPE_CHAN_CHANGE)
* - PRIMARY_CHAN_CENTER_FREQ_MHZ
* Bits 31:0
* Purpose: identify the (center of the) new 20 MHz primary channel
* Value: center frequency of the 20 MHz primary channel, in MHz units
* - CONTIG_CHAN1_CENTER_FREQ_MHZ
* Bits 31:0
* Purpose: identify the (center of the) contiguous frequency range
* comprising the new channel.
* For example, if the new channel is a 80 MHz channel extending
* 60 MHz beyond the primary channel, this field would be 30 larger
* than the primary channel center frequency field.
* Value: center frequency of the contiguous frequency range comprising
* the full channel in MHz units
* (80+80 channels also use the CONTIG_CHAN2 field)
* - CONTIG_CHAN2_CENTER_FREQ_MHZ
* Bits 31:0
* Purpose: Identify the (center of the) 80 MHz extension frequency range
* within a VHT 80+80 channel.
* This field is only relevant for VHT 80+80 channels.
* Value: center frequency of the 80 MHz extension channel in a VHT 80+80
* channel (arbitrary value for cases besides VHT 80+80)
* - PHY_MODE
* Bits 31:0
* Purpose: specify the PHY channel's type (legacy vs. HT vs. VHT), width,
* and band
* Value: htt_phy_mode enum value
*/
PREPACK struct htt_chan_change_t
{
/* DWORD 0: flags and meta-data */
A_UINT32
msg_type: 8, /* HTT_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE */
reserved1: 24;
A_UINT32 primary_chan_center_freq_mhz;
A_UINT32 contig_chan1_center_freq_mhz;
A_UINT32 contig_chan2_center_freq_mhz;
A_UINT32 phy_mode;
} POSTPACK;
/*
* Due to historical / backwards-compatibility reasons, maintain the
* below htt_chan_change_msg struct definition, which needs to be
* consistent with the above htt_chan_change_t struct definition
* (aside from the htt_chan_change_t definition including the msg_type
* dword within the message, and the htt_chan_change_msg only containing
* the payload of the message that follows the msg_type dword).
*/
PREPACK struct htt_chan_change_msg {
A_UINT32 chan_mhz; /* frequency in mhz */
A_UINT32 band_center_freq1; /* Center frequency 1 in MHz */
A_UINT32 band_center_freq2; /* Center frequency 2 in MHz - valid only for 11acvht 80plus80 mode*/
A_UINT32 chan_mode; /* WLAN_PHY_MODE of the channel defined in wlan_defs.h */
} POSTPACK;
#define HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_M 0xffffffff
#define HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_S 0
#define HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_M 0xffffffff
#define HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_S 0
#define HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_M 0xffffffff
#define HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_S 0
#define HTT_CHAN_CHANGE_PHY_MODE_M 0xffffffff
#define HTT_CHAN_CHANGE_PHY_MODE_S 0
#define HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ, value);\
(word) |= (value) << HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_S; \
} while (0)
#define HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_GET(word) \
(((word) & HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_M) \
>> HTT_CHAN_CHANGE_PRIMARY_CHAN_CENTER_FREQ_MHZ_S)
#define HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ, value);\
(word) |= (value) << HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_S; \
} while (0)
#define HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_GET(word) \
(((word) & HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_M) \
>> HTT_CHAN_CHANGE_CONTIG_CHAN1_CENTER_FREQ_MHZ_S)
#define HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ, value);\
(word) |= (value) << HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_S; \
} while (0)
#define HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_GET(word) \
(((word) & HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_M) \
>> HTT_CHAN_CHANGE_CONTIG_CHAN2_CENTER_FREQ_MHZ_S)
#define HTT_CHAN_CHANGE_PHY_MODE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CHANGE_PHY_MODE, value);\
(word) |= (value) << HTT_CHAN_CHANGE_PHY_MODE_S; \
} while (0)
#define HTT_CHAN_CHANGE_PHY_MODE_GET(word) \
(((word) & HTT_CHAN_CHANGE_PHY_MODE_M) \
>> HTT_CHAN_CHANGE_PHY_MODE_S)
#define HTT_CHAN_CHANGE_BYTES sizeof(struct htt_chan_change_t)
/**
* @brief rx offload packet error message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_OFLD_PKT_ERR
*
* @details
* HTT_RX_OFLD_PKT_ERR message is sent by target to host to indicate err
* of target payload like mic err.
*
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | tid | vdev_id | msg_sub_type | msg_type |
* |-------------------------------------------------------------------|
* : (sub-type dependent content) :
* :- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -:
* Header fields:
* - msg_type
* Bits 7:0
* Purpose: Identifies this as HTT_RX_OFLD_PKT_ERR message
* value: 0x16 (HTT_T2H_MSG_TYPE_RX_OFLD_PKT_ERR)
* - msg_sub_type
* Bits 15:8
* Purpose: Identifies which type of rx error is reported by this message
* value: htt_rx_ofld_pkt_err_type
* - vdev_id
* Bits 23:16
* Purpose: Identifies which vdev received the erroneous rx frame
* value:
* - tid
* Bits 31:24
* Purpose: Identifies the traffic type of the rx frame
* value:
*
* - The payload fields used if the sub-type == MIC error are shown below.
* Note - MIC err is per MSDU, while PN is per MPDU.
* The FW will discard the whole MPDU if any MSDU within the MPDU is marked
* with MIC err in A-MSDU case, so FW will send only one HTT message
* with the PN of this MPDU attached to indicate MIC err for one MPDU
* instead of sending separate HTT messages for each wrong MSDU within
* the MPDU.
*
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | Rsvd | key_id | peer_id |
* |-------------------------------------------------------------------|
* | receiver MAC addr 31:0 |
* |-------------------------------------------------------------------|
* | Rsvd | receiver MAC addr 47:32 |
* |-------------------------------------------------------------------|
* | transmitter MAC addr 31:0 |
* |-------------------------------------------------------------------|
* | Rsvd | transmitter MAC addr 47:32 |
* |-------------------------------------------------------------------|
* | PN 31:0 |
* |-------------------------------------------------------------------|
* | Rsvd | PN 47:32 |
* |-------------------------------------------------------------------|
* - peer_id
* Bits 15:0
* Purpose: identifies which peer is frame is from
* value:
* - key_id
* Bits 23:16
* Purpose: identifies key_id of rx frame
* value:
* - RA_31_0 (receiver MAC addr 31:0)
* Bits 31:0
* Purpose: identifies by MAC address which vdev received the frame
* value: MAC address lower 4 bytes
* - RA_47_32 (receiver MAC addr 47:32)
* Bits 15:0
* Purpose: identifies by MAC address which vdev received the frame
* value: MAC address upper 2 bytes
* - TA_31_0 (transmitter MAC addr 31:0)
* Bits 31:0
* Purpose: identifies by MAC address which peer transmitted the frame
* value: MAC address lower 4 bytes
* - TA_47_32 (transmitter MAC addr 47:32)
* Bits 15:0
* Purpose: identifies by MAC address which peer transmitted the frame
* value: MAC address upper 2 bytes
* - PN_31_0
* Bits 31:0
* Purpose: Identifies pn of rx frame
* value: PN lower 4 bytes
* - PN_47_32
* Bits 15:0
* Purpose: Identifies pn of rx frame
* value:
* TKIP or CCMP: PN upper 2 bytes
* WAPI: PN bytes 6:5 (bytes 15:7 not included in this message)
*/
enum htt_rx_ofld_pkt_err_type {
HTT_RX_OFLD_PKT_ERR_TYPE_NONE = 0,
HTT_RX_OFLD_PKT_ERR_TYPE_MIC_ERR,
};
/* definition for HTT_RX_OFLD_PKT_ERR msg hdr */
#define HTT_RX_OFLD_PKT_ERR_HDR_BYTES 4
#define HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_M 0x0000ff00
#define HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_S 8
#define HTT_RX_OFLD_PKT_ERR_VDEV_ID_M 0x00ff0000
#define HTT_RX_OFLD_PKT_ERR_VDEV_ID_S 16
#define HTT_RX_OFLD_PKT_ERR_TID_M 0xff000000
#define HTT_RX_OFLD_PKT_ERR_TID_S 24
#define HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_GET(_var) \
(((_var) & HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_M) \
>> HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_S)
#define HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE, _val); \
((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MSG_SUB_TYPE_S)); \
} while (0)
#define HTT_RX_OFLD_PKT_ERR_VDEV_ID_GET(_var) \
(((_var) & HTT_RX_OFLD_PKT_ERR_VDEV_ID_M) >> HTT_RX_OFLD_PKT_ERR_VDEV_ID_S)
#define HTT_RX_OFLD_PKT_ERR_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_VDEV_ID_S)); \
} while (0)
#define HTT_RX_OFLD_PKT_ERR_TID_GET(_var) \
(((_var) & HTT_RX_OFLD_PKT_ERR_TID_M) >> HTT_RX_OFLD_PKT_ERR_TID_S)
#define HTT_RX_OFLD_PKT_ERR_TID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_TID, _val); \
((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_TID_S)); \
} while (0)
/* definition for HTT_RX_OFLD_PKT_ERR_MIC_ERR msg sub-type payload */
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_BYTES 28
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_M 0x0000ffff
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_S 0
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_M 0x00ff0000
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_S 16
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_M 0xffffffff
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_S 0
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_M 0x0000ffff
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_S 0
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_M 0xffffffff
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_S 0
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_M 0x0000ffff
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_S 0
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_M 0xffffffff
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_S 0
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_M 0x0000ffff
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_S 0
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_GET(_var) \
(((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_M) >> \
HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_S)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID, _val); \
((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_PEER_ID_S)); \
} while (0)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_GET(_var) \
(((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_M) >> \
HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_S)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID, _val); \
((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_KEYID_S)); \
} while (0)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_GET(_var) \
(((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_M) >> \
HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_S)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0, _val); \
((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_31_0_S)); \
} while (0)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_GET(_var) \
(((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_M) >> \
HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_S)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32, _val); \
((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_RA_47_32_S)); \
} while (0)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_GET(_var) \
(((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_M) >> \
HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_S)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0, _val); \
((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_31_0_S)); \
} while (0)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_GET(_var) \
(((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_M) >> \
HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_S)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32, _val); \
((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_TA_47_32_S)); \
} while (0)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_GET(_var) \
(((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_M) >> \
HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_S)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0, _val); \
((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_31_0_S)); \
} while (0)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_GET(_var) \
(((_var) & HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_M) >> \
HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_S)
#define HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32, _val); \
((_var) |= ((_val) << HTT_RX_OFLD_PKT_ERR_MIC_ERR_PN_47_32_S)); \
} while (0)
/**
* @brief target -> host peer rate report message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RATE_REPORT
*
* @details
* HTT_T2H_MSG_TYPE_RATE_REPORT message is sent by target to host to indicate the
* justified rate of all the peers.
*
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | peer_count | | msg_type |
* |-------------------------------------------------------------------|
* : Payload (variant number of peer rate report) :
* :- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -:
* Header fields:
* - msg_type
* Bits 7:0
* Purpose: Identifies this as HTT_T2H_MSG_TYPE_RATE_REPORT message.
* value: 0x17 (HTT_T2H_MSG_TYPE_RATE_REPORT)
* - reserved
* Bits 15:8
* Purpose:
* value:
* - peer_count
* Bits 31:16
* Purpose: Specify how many peer rate report elements are present in the payload.
* value:
*
* Payload:
* There are variant number of peer rate report follow the first 32 bits.
* The peer rate report is defined as follows.
*
* |31 20|19 16|15 0|
* |-----------------------+---------+---------------------------------|-
* | reserved | phy | peer_id | \
* |-------------------------------------------------------------------| -> report #0
* | rate | /
* |-----------------------+---------+---------------------------------|-
* | reserved | phy | peer_id | \
* |-------------------------------------------------------------------| -> report #1
* | rate | /
* |-----------------------+---------+---------------------------------|-
* | reserved | phy | peer_id | \
* |-------------------------------------------------------------------| -> report #2
* | rate | /
* |-------------------------------------------------------------------|-
* : :
* : :
* : :
* :-------------------------------------------------------------------:
*
* - peer_id
* Bits 15:0
* Purpose: identify the peer
* value:
* - phy
* Bits 19:16
* Purpose: identify which phy is in use
* value: 0=11b, 1=11a/g, 2=11n, 3=11ac.
* Please see enum htt_peer_report_phy_type for detail.
* - reserved
* Bits 31:20
* Purpose:
* value:
* - rate
* Bits 31:0
* Purpose: represent the justified rate of the peer specified by peer_id
* value:
*/
enum htt_peer_rate_report_phy_type {
HTT_PEER_RATE_REPORT_11B = 0,
HTT_PEER_RATE_REPORT_11A_G,
HTT_PEER_RATE_REPORT_11N,
HTT_PEER_RATE_REPORT_11AC,
};
#define HTT_PEER_RATE_REPORT_SIZE 8
#define HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_M 0xffff0000
#define HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_S 16
#define HTT_PEER_RATE_REPORT_MSG_PEER_ID_M 0x0000ffff
#define HTT_PEER_RATE_REPORT_MSG_PEER_ID_S 0
#define HTT_PEER_RATE_REPORT_MSG_PHY_M 0x000f0000
#define HTT_PEER_RATE_REPORT_MSG_PHY_S 16
#define HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_GET(_var) \
(((_var) & HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_M) \
>> HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_S)
#define HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PEER_RATE_REPORT_MSG_PEER_COUNT, _val); \
((_var) |= ((_val) << HTT_PEER_RATE_REPORT_MSG_PEER_COUNT_S)); \
} while (0)
#define HTT_PEER_RATE_REPORT_MSG_PEER_ID_GET(_var) \
(((_var) & HTT_PEER_RATE_REPORT_MSG_PEER_ID_M) \
>> HTT_PEER_RATE_REPORT_MSG_PEER_ID_S)
#define HTT_PEER_RATE_REPORT_MSG_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PEER_RATE_REPORT_MSG_PEER_ID, _val); \
((_var) |= ((_val) << HTT_PEER_RATE_REPORT_MSG_PEER_ID_S)); \
} while (0)
#define HTT_PEER_RATE_REPORT_MSG_PHY_GET(_var) \
(((_var) & HTT_PEER_RATE_REPORT_MSG_PHY_M) \
>> HTT_PEER_RATE_REPORT_MSG_PHY_S)
#define HTT_PEER_RATE_REPORT_MSG_PHY_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PEER_RATE_REPORT_MSG_PHY, _val); \
((_var) |= ((_val) << HTT_PEER_RATE_REPORT_MSG_PHY_S)); \
} while (0)
/**
* @brief target -> host flow pool map message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_FLOW_POOL_MAP
*
* @details
* HTT_T2H_MSG_TYPE_FLOW_POOL_MAP message is sent by the target when setting up
* a flow of descriptors.
*
* This message is in TLV format and indicates the parameters to be setup a
* flow in the host. Each entry indicates that a particular flow ID is ready to
* receive descriptors from a specified pool.
*
* The message would appear as follows:
*
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* header | reserved | num_flows | msg_type |
* |-------------------------------------------------------------------|
* | |
* : payload :
* | |
* |-------------------------------------------------------------------|
*
* The header field is one DWORD long and is interpreted as follows:
* b'0:7 - msg_type: Set to 0x18 (HTT_T2H_MSG_TYPE_FLOW_POOL_MAP)
* b'8-15 - num_flows: This will indicate the number of flows being setup in
* this message
* b'16-31 - reserved: These bits are reserved for future use
*
* Payload:
* The payload would contain multiple objects of the following structure. Each
* object represents a flow.
*
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* header | reserved | num_flows | msg_type |
* |-------------------------------------------------------------------|
* payload0| flow_type |
* |-------------------------------------------------------------------|
* | flow_id |
* |-------------------------------------------------------------------|
* | reserved0 | flow_pool_id |
* |-------------------------------------------------------------------|
* | reserved1 | flow_pool_size |
* |-------------------------------------------------------------------|
* | reserved2 |
* |-------------------------------------------------------------------|
* payload1| flow_type |
* |-------------------------------------------------------------------|
* | flow_id |
* |-------------------------------------------------------------------|
* | reserved0 | flow_pool_id |
* |-------------------------------------------------------------------|
* | reserved1 | flow_pool_size |
* |-------------------------------------------------------------------|
* | reserved2 |
* |-------------------------------------------------------------------|
* | . |
* | . |
* | . |
* |-------------------------------------------------------------------|
*
* Each payload is 5 DWORDS long and is interpreted as follows:
* dword0 - b'0:31 - flow_type: This indicates the type of the entity to which
* this flow is associated. It can be VDEV, peer,
* or tid (AC). Based on enum htt_flow_type.
*
* dword1 - b'0:31 - flow_id: Identifier for the flow corresponding to this
* object. For flow_type vdev it is set to the
* vdevid, for peer it is peerid and for tid, it is
* tid_num.
*
* dword2 - b'0:15 - flow_pool_id: Identifier of the descriptor-pool being used
* in the host for this flow
* b'16:31 - reserved0: This field in reserved for the future. In case
* we have a hierarchical implementation (HCM) of
* pools, it can be used to indicate the ID of the
* parent-pool.
*
* dword3 - b'0:15 - flow_pool_size: Size of the pool in number of descriptors.
* Descriptors for this flow will be
* allocated from this pool in the host.
* b'16:31 - reserved1: This field in reserved for the future. In case
* we have a hierarchical implementation of pools,
* it can be used to indicate the max number of
* descriptors in the pool. The b'0:15 can be used
* to indicate min number of descriptors in the
* HCM scheme.
*
* dword4 - b'0:31 - reserved2: This field in reserved for the future. In case
* we have a hierarchical implementation of pools,
* b'0:15 can be used to indicate the
* priority-based borrowing (PBB) threshold of
* the flow's pool. The b'16:31 are still left
* reserved.
*/
enum htt_flow_type {
FLOW_TYPE_VDEV = 0,
/* Insert new flow types above this line */
};
PREPACK struct htt_flow_pool_map_payload_t {
A_UINT32 flow_type;
A_UINT32 flow_id;
A_UINT32 flow_pool_id:16,
reserved0:16;
A_UINT32 flow_pool_size:16,
reserved1:16;
A_UINT32 reserved2;
} POSTPACK;
#define HTT_FLOW_POOL_MAP_HEADER_SZ (sizeof(A_UINT32))
#define HTT_FLOW_POOL_MAP_PAYLOAD_SZ \
(sizeof(struct htt_flow_pool_map_payload_t))
#define HTT_FLOW_POOL_MAP_NUM_FLOWS_M 0x0000ff00
#define HTT_FLOW_POOL_MAP_NUM_FLOWS_S 8
#define HTT_FLOW_POOL_MAP_FLOW_TYPE_M 0xffffffff
#define HTT_FLOW_POOL_MAP_FLOW_TYPE_S 0
#define HTT_FLOW_POOL_MAP_FLOW_ID_M 0xffffffff
#define HTT_FLOW_POOL_MAP_FLOW_ID_S 0
#define HTT_FLOW_POOL_MAP_FLOW_POOL_ID_M 0x0000ffff
#define HTT_FLOW_POOL_MAP_FLOW_POOL_ID_S 0
#define HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_M 0x0000ffff
#define HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_S 0
#define HTT_FLOW_POOL_MAP_NUM_FLOWS_GET(_var) \
(((_var) & HTT_FLOW_POOL_MAP_NUM_FLOWS_M) >> HTT_FLOW_POOL_MAP_NUM_FLOWS_S)
#define HTT_FLOW_POOL_MAP_FLOW_TYPE_GET(_var) \
(((_var) & HTT_FLOW_POOL_MAP_FLOW_TYPE_M) >> HTT_FLOW_POOL_MAP_FLOW_TYPE_S)
#define HTT_FLOW_POOL_MAP_FLOW_ID_GET(_var) \
(((_var) & HTT_FLOW_POOL_MAP_FLOW_ID_M) >> HTT_FLOW_POOL_MAP_FLOW_ID_S)
#define HTT_FLOW_POOL_MAP_FLOW_POOL_ID_GET(_var) \
(((_var) & HTT_FLOW_POOL_MAP_FLOW_POOL_ID_M) >> \
HTT_FLOW_POOL_MAP_FLOW_POOL_ID_S)
#define HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_GET(_var) \
(((_var) & HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_M) >> \
HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_S)
#define HTT_FLOW_POOL_MAP_NUM_FLOWS_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_FLOW_POOL_MAP_NUM_FLOWS, _val); \
((_var) |= ((_val) << HTT_FLOW_POOL_MAP_NUM_FLOWS_S)); \
} while (0)
#define HTT_FLOW_POOL_MAP_FLOW_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_FLOW_POOL_MAP_FLOW_TYPE, _val); \
((_var) |= ((_val) << HTT_FLOW_POOL_MAP_FLOW_TYPE_S)); \
} while (0)
#define HTT_FLOW_POOL_MAP_FLOW_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_FLOW_POOL_MAP_FLOW_ID, _val); \
((_var) |= ((_val) << HTT_FLOW_POOL_MAP_FLOW_ID_S)); \
} while (0)
#define HTT_FLOW_POOL_MAP_FLOW_POOL_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_FLOW_POOL_MAP_FLOW_POOL_ID, _val); \
((_var) |= ((_val) << HTT_FLOW_POOL_MAP_FLOW_POOL_ID_S)); \
} while (0)
#define HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE, _val); \
((_var) |= ((_val) << HTT_FLOW_POOL_MAP_FLOW_POOL_SIZE_S)); \
} while (0)
/**
* @brief target -> host flow pool unmap message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_FLOW_POOL_UNMAP
*
* @details
* HTT_T2H_MSG_TYPE_FLOW_POOL_UNMAP message is sent by the target when tearing
* down a flow of descriptors.
* This message indicates that for the flow (whose ID is provided) is wanting
* to stop receiving descriptors. This flow ID corresponds to the ID of the
* pool of descriptors from where descriptors are being allocated for this
* flow. When a flow (and its pool) are unmapped, all the child-pools will also
* be unmapped by the host.
*
* The message would appear as follows:
*
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | reserved0 | msg_type |
* |-------------------------------------------------------------------|
* | flow_type |
* |-------------------------------------------------------------------|
* | flow_id |
* |-------------------------------------------------------------------|
* | reserved1 | flow_pool_id |
* |-------------------------------------------------------------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to 0x19
* (HTT_T2H_MSG_TYPE_FLOW_POOL_UNMAP)
* b'8:31 - reserved0: Reserved for future use
*
* dword1 - b'0:31 - flow_type: This indicates the type of the entity to which
* this flow is associated. It can be VDEV, peer,
* or tid (AC). Based on enum htt_flow_type.
*
* dword2 - b'0:31 - flow_id: Identifier for the flow corresponding to this
* object. For flow_type vdev it is set to the
* vdevid, for peer it is peerid and for tid, it is
* tid_num.
*
* dword3 - b'0:15 - flow_pool_id: Identifier of the descriptor-pool being
* used in the host for this flow
* b'16:31 - reserved0: This field in reserved for the future.
*
*/
PREPACK struct htt_flow_pool_unmap_t {
A_UINT32 msg_type:8,
reserved0:24;
A_UINT32 flow_type;
A_UINT32 flow_id;
A_UINT32 flow_pool_id:16,
reserved1:16;
} POSTPACK;
#define HTT_FLOW_POOL_UNMAP_SZ (sizeof(struct htt_flow_pool_unmap_t))
#define HTT_FLOW_POOL_UNMAP_FLOW_TYPE_M 0xffffffff
#define HTT_FLOW_POOL_UNMAP_FLOW_TYPE_S 0
#define HTT_FLOW_POOL_UNMAP_FLOW_ID_M 0xffffffff
#define HTT_FLOW_POOL_UNMAP_FLOW_ID_S 0
#define HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_M 0x0000ffff
#define HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_S 0
#define HTT_FLOW_POOL_UNMAP_FLOW_TYPE_GET(_var) \
(((_var) & HTT_FLOW_POOL_UNMAP_FLOW_TYPE_M) >> \
HTT_FLOW_POOL_UNMAP_FLOW_TYPE_S)
#define HTT_FLOW_POOL_UNMAP_FLOW_ID_GET(_var) \
(((_var) & HTT_FLOW_POOL_UNMAP_FLOW_ID_M) >> HTT_FLOW_POOL_UNMAP_FLOW_ID_S)
#define HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_GET(_var) \
(((_var) & HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_M) >> \
HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_S)
#define HTT_FLOW_POOL_UNMAP_FLOW_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_FLOW_POOL_UNMAP_FLOW_TYPE, _val); \
((_var) |= ((_val) << HTT_FLOW_POOL_UNMAP_FLOW_TYPE_S)); \
} while (0)
#define HTT_FLOW_POOL_UNMAP_FLOW_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_FLOW_POOL_UNMAP_FLOW_ID, _val); \
((_var) |= ((_val) << HTT_FLOW_POOL_UNMAP_FLOW_ID_S)); \
} while (0)
#define HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID, _val); \
((_var) |= ((_val) << HTT_FLOW_POOL_UNMAP_FLOW_POOL_ID_S)); \
} while (0)
/**
* @brief target -> host SRING setup done message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_SRING_SETUP_DONE
*
* @details
* HTT_T2H_MSG_TYPE_SRING_SETUP_DONE message is sent by the target when
* SRNG ring setup is done
*
* This message indicates whether the last setup operation is successful.
* It will be sent to host when host set respose_required bit in
* HTT_H2T_MSG_TYPE_SRING_SETUP.
* The message would appear as follows:
*
* |31 24|23 16|15 8|7 0|
* |--------------- +----------------+----------------+----------------|
* | setup_status | ring_id | pdev_id | msg_type |
* |-------------------------------------------------------------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to 0x1a
* (HTT_T2H_MSG_TYPE_SRING_SETUP_DONE)
* b'8:15 - pdev_id:
* 0 (for rings at SOC/UMAC level),
* 1/2/3 mac id (for rings at LMAC level)
* b'16:23 - ring_id: Identify the ring which is set up
* More details can be got from enum htt_srng_ring_id
* b'24:31 - setup_status: Indicate status of setup operation
* Refer to htt_ring_setup_status
*/
PREPACK struct htt_sring_setup_done_t {
A_UINT32 msg_type: 8,
pdev_id: 8,
ring_id: 8,
setup_status: 8;
} POSTPACK;
enum htt_ring_setup_status {
htt_ring_setup_status_ok = 0,
htt_ring_setup_status_error,
};
#define HTT_SRING_SETUP_DONE_SZ (sizeof(struct htt_sring_setup_done_t))
#define HTT_SRING_SETUP_DONE_PDEV_ID_M 0x0000ff00
#define HTT_SRING_SETUP_DONE_PDEV_ID_S 8
#define HTT_SRING_SETUP_DONE_PDEV_ID_GET(_var) \
(((_var) & HTT_SRING_SETUP_DONE_PDEV_ID_M) >> \
HTT_SRING_SETUP_DONE_PDEV_ID_S)
#define HTT_SRING_SETUP_DONE_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_DONE_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_DONE_PDEV_ID_S)); \
} while (0)
#define HTT_SRING_SETUP_DONE_RING_ID_M 0x00ff0000
#define HTT_SRING_SETUP_DONE_RING_ID_S 16
#define HTT_SRING_SETUP_DONE_RING_ID_GET(_var) \
(((_var) & HTT_SRING_SETUP_DONE_RING_ID_M) >> \
HTT_SRING_SETUP_DONE_RING_ID_S)
#define HTT_SRING_SETUP_DONE_RING_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_DONE_RING_ID, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_DONE_RING_ID_S)); \
} while (0)
#define HTT_SRING_SETUP_DONE_STATUS_M 0xff000000
#define HTT_SRING_SETUP_DONE_STATUS_S 24
#define HTT_SRING_SETUP_DONE_STATUS_GET(_var) \
(((_var) & HTT_SRING_SETUP_DONE_STATUS_M) >> \
HTT_SRING_SETUP_DONE_STATUS_S)
#define HTT_SRING_SETUP_DONE_STATUS_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_SRING_SETUP_DONE_STATUS, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_DONE_STATUS_S)); \
} while (0)
/**
* @brief target -> flow map flow info
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_MAP_FLOW_INFO
*
* @details
* HTT TX map flow entry with tqm flow pointer
* Sent from firmware to host to add tqm flow pointer in corresponding
* flow search entry. Flow metadata is replayed back to host as part of this
* struct to enable host to find the specific flow search entry
*
* The message would appear as follows:
*
* |31 28|27 18|17 14|13 8|7 0|
* |-------+------------------------------------------+----------------|
* | rsvd0 | fse_hsh_idx | msg_type |
* |-------------------------------------------------------------------|
* | rsvd1 | tid | peer_id |
* |-------------------------------------------------------------------|
* | tqm_flow_pntr_lo |
* |-------------------------------------------------------------------|
* | tqm_flow_pntr_hi |
* |-------------------------------------------------------------------|
* | fse_meta_data |
* |-------------------------------------------------------------------|
*
* The message is interpreted as follows:
*
* dword0 - b'0:7 - msg_type: This will be set to 0x1b
* (HTT_T2H_MSG_TYPE_MAP_FLOW_INFO)
*
* dword0 - b'8:27 - fse_hsh_idx: Flow search table index provided by host
* for this flow entry
*
* dword0 - b'28:31 - rsvd0: Reserved for future use
*
* dword1 - b'0:13 - peer_id: Software peer id given by host during association
*
* dword1 - b'14:17 - tid
*
* dword1 - b'18:31 - rsvd1: Reserved for future use
*
* dword2 - b'0:31 - tqm_flow_pntr_lo: Lower 32 bits of TQM flow pointer
*
* dword3 - b'0:31 - tqm_flow_pntr_hi: Higher 32 bits of TQM flow pointer
*
* dword4 - b'0:31 - fse_meta_data: Replay back TX flow search metadata
* given by host
*/
PREPACK struct htt_tx_map_flow_info {
A_UINT32
msg_type: 8,
fse_hsh_idx: 20,
rsvd0: 4;
A_UINT32
peer_id: 14,
tid: 4,
rsvd1: 14;
A_UINT32 tqm_flow_pntr_lo;
A_UINT32 tqm_flow_pntr_hi;
struct htt_tx_flow_metadata fse_meta_data;
} POSTPACK;
/* DWORD 0 */
#define HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_M 0x0fffff00
#define HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_S 8
/* DWORD 1 */
#define HTT_TX_MAP_FLOW_INFO_PEER_ID_M 0x00003fff
#define HTT_TX_MAP_FLOW_INFO_PEER_ID_S 0
#define HTT_TX_MAP_FLOW_INFO_TID_M 0x0003c000
#define HTT_TX_MAP_FLOW_INFO_TID_S 14
/* DWORD 0 */
#define HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_GET(_var) \
(((_var) & HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_M) >> \
HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_S)
#define HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX, _val); \
((_var) |= ((_val) << HTT_TX_MAP_FLOW_INFO_FSE_HSH_IDX_S)); \
} while (0)
/* DWORD 1 */
#define HTT_TX_MAP_FLOW_INFO_PEER_ID_GET(_var) \
(((_var) & HTT_TX_MAP_FLOW_INFO_PEER_ID_M) >> \
HTT_TX_MAP_FLOW_INFO_PEER_ID_S)
#define HTT_TX_MAP_FLOW_INFO_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MAP_FLOW_INFO_PEER_ID_IDX, _val); \
((_var) |= ((_val) << HTT_TX_MAP_FLOW_INFO_PEER_ID_S)); \
} while (0)
#define HTT_TX_MAP_FLOW_INFO_TID_GET(_var) \
(((_var) & HTT_TX_MAP_FLOW_INFO_TID_M) >> \
HTT_TX_MAP_FLOW_INFO_TID_S)
#define HTT_TX_MAP_FLOW_INFO_TID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_MAP_FLOW_INFO_TID_IDX, _val); \
((_var) |= ((_val) << HTT_TX_MAP_FLOW_INFO_TID_S)); \
} while (0)
/*
* htt_dbg_ext_stats_status -
* present - The requested stats have been delivered in full.
* This indicates that either the stats information was contained
* in its entirety within this message, or else this message
* completes the delivery of the requested stats info that was
* partially delivered through earlier STATS_CONF messages.
* partial - The requested stats have been delivered in part.
* One or more subsequent STATS_CONF messages with the same
* cookie value will be sent to deliver the remainder of the
* information.
* error - The requested stats could not be delivered, for example due
* to a shortage of memory to construct a message holding the
* requested stats.
* invalid - The requested stat type is either not recognized, or the
* target is configured to not gather the stats type in question.
*/
enum htt_dbg_ext_stats_status {
HTT_DBG_EXT_STATS_STATUS_PRESENT = 0,
HTT_DBG_EXT_STATS_STATUS_PARTIAL = 1,
HTT_DBG_EXT_STATS_STATUS_ERROR = 2,
HTT_DBG_EXT_STATS_STATUS_INVALID = 3,
};
/**
* @brief target -> host ppdu stats upload
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_PPDU_STATS_IND
*
* @details
* The following field definitions describe the format of the HTT target
* to host ppdu stats indication message.
*
*
* |31 24|23 16|15 12|11 10|9 8|7 0 |
* |-----------------------------+-------+-------+--------+---------------|
* | payload_size | rsvd |pdev_id|mac_id | msg type |
* |-------------+---------------+-------+-------+--------+---------------|
* | tgt_private | ppdu_id |
* |-------------+--------------------------------------------------------|
* | Timestamp in us |
* |----------------------------------------------------------------------|
* | reserved |
* |----------------------------------------------------------------------|
* | type-specific stats info |
* | (see htt_ppdu_stats.h) |
* |----------------------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: Identifies this is a PPDU STATS indication
* message.
* Value: 0x1d (HTT_T2H_MSG_TYPE_PPDU_STATS_IND)
* - mac_id
* Bits 9:8
* Purpose: mac_id of this ppdu_id
* Value: 0-3
* - pdev_id
* Bits 11:10
* Purpose: pdev_id of this ppdu_id
* Value: 0-3
* 0 (for rings at SOC level),
* 1/2/3 PDEV -> 0/1/2
* - payload_size
* Bits 31:16
* Purpose: total tlv size
* Value: payload_size in bytes
*/
#define HTT_T2H_PPDU_STATS_IND_HDR_SIZE 16
#define HTT_T2H_PPDU_STATS_MAC_ID_M 0x00000300
#define HTT_T2H_PPDU_STATS_MAC_ID_S 8
#define HTT_T2H_PPDU_STATS_PDEV_ID_M 0x00000C00
#define HTT_T2H_PPDU_STATS_PDEV_ID_S 10
#define HTT_T2H_PPDU_STATS_PAYLOAD_SIZE_M 0xFFFF0000
#define HTT_T2H_PPDU_STATS_PAYLOAD_SIZE_S 16
#define HTT_T2H_PPDU_STATS_PPDU_ID_M 0x00FFFFFF
#define HTT_T2H_PPDU_STATS_PPDU_ID_S 0
/* bits 31:24 are used by the target for internal purposes */
#define HTT_T2H_PPDU_STATS_MAC_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_PPDU_STATS_MAC_ID, value); \
(word) |= (value) << HTT_T2H_PPDU_STATS_MAC_ID_S; \
} while (0)
#define HTT_T2H_PPDU_STATS_MAC_ID_GET(word) \
(((word) & HTT_T2H_PPDU_STATS_MAC_ID_M) >> \
HTT_T2H_PPDU_STATS_MAC_ID_S)
#define HTT_T2H_PPDU_STATS_PDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_PPDU_STATS_PDEV_ID, value); \
(word) |= (value) << HTT_T2H_PPDU_STATS_PDEV_ID_S; \
} while (0)
#define HTT_T2H_PPDU_STATS_PDEV_ID_GET(word) \
(((word) & HTT_T2H_PPDU_STATS_PDEV_ID_M) >> \
HTT_T2H_PPDU_STATS_PDEV_ID_S)
#define HTT_T2H_PPDU_STATS_PAYLOAD_SIZE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_PPDU_STATS_PAYLOAD_SIZE, value); \
(word) |= (value) << HTT_T2H_PPDU_STATS_PAYLOAD_SIZE_S; \
} while (0)
#define HTT_T2H_PPDU_STATS_PAYLOAD_SIZE_GET(word) \
(((word) & HTT_T2H_PPDU_STATS_PAYLOAD_SIZE_M) >> \
HTT_T2H_PPDU_STATS_PAYLOAD_SIZE_S)
#define HTT_T2H_PPDU_STATS_PPDU_ID_SET(word, value) \
do { \
/*HTT_CHECK_SET_VAL(HTT_T2H_PPDU_STATS_PPDU_ID, value);*/ \
(word) |= (value) << HTT_T2H_PPDU_STATS_PPDU_ID_S; \
} while (0)
#define HTT_T2H_PPDU_STATS_PPDU_ID_GET(word) \
(((word) & HTT_T2H_PPDU_STATS_PPDU_ID_M) >> \
HTT_T2H_PPDU_STATS_PPDU_ID_S)
/* htt_t2h_ppdu_stats_ind_hdr_t
* This struct contains the fields within the header of the
* HTT_T2H_PPDU_STATS_IND message, preceding the type-specific
* stats info.
* This struct assumes little-endian layout, and thus is only
* suitable for use within processors known to be little-endian
* (such as the target).
* In contrast, the above macros provide endian-portable methods
* to get and set the bitfields within this PPDU_STATS_IND header.
*/
typedef struct {
A_UINT32 msg_type: 8, /* bits 7:0 */
mac_id: 2, /* bits 9:8 */
pdev_id: 2, /* bits 11:10 */
reserved1: 4, /* bits 15:12 */
payload_size: 16; /* bits 31:16 */
A_UINT32 ppdu_id;
A_UINT32 timestamp_us;
A_UINT32 reserved2;
} htt_t2h_ppdu_stats_ind_hdr_t;
/**
* @brief target -> host extended statistics upload
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_EXT_STATS_CONF
*
* @details
* The following field definitions describe the format of the HTT target
* to host stats upload confirmation message.
* The message contains a cookie echoed from the HTT host->target stats
* upload request, which identifies which request the confirmation is
* for, and a single stats can span over multiple HTT stats indication
* due to the HTT message size limitation so every HTT ext stats indication
* will have tag-length-value stats information elements.
* The tag-length header for each HTT stats IND message also includes a
* status field, to indicate whether the request for the stat type in
* question was fully met, partially met, unable to be met, or invalid
* (if the stat type in question is disabled in the target).
* A Done bit 1's indicate the end of the of stats info elements.
*
*
* |31 16|15 12|11|10 8|7 5|4 0|
* |--------------------------------------------------------------|
* | reserved | msg type |
* |--------------------------------------------------------------|
* | cookie LSBs |
* |--------------------------------------------------------------|
* | cookie MSBs |
* |--------------------------------------------------------------|
* | stats entry length | rsvd | D| S | stat type |
* |--------------------------------------------------------------|
* | type-specific stats info |
* | (see htt_stats.h) |
* |--------------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: Identifies this is a extended statistics upload confirmation
* message.
* Value: 0x1c (HTT_T2H_MSG_TYPE_EXT_STATS_CONF)
* - COOKIE_LSBS
* Bits 31:0
* Purpose: Provide a mechanism to match a target->host stats confirmation
* message with its preceding host->target stats request message.
* Value: LSBs of the opaque cookie specified by the host-side requestor
* - COOKIE_MSBS
* Bits 31:0
* Purpose: Provide a mechanism to match a target->host stats confirmation
* message with its preceding host->target stats request message.
* Value: MSBs of the opaque cookie specified by the host-side requestor
*
* Stats Information Element tag-length header fields:
* - STAT_TYPE
* Bits 7:0
* Purpose: identifies the type of statistics info held in the
* following information element
* Value: htt_dbg_ext_stats_type
* - STATUS
* Bits 10:8
* Purpose: indicate whether the requested stats are present
* Value: htt_dbg_ext_stats_status
* - DONE
* Bits 11
* Purpose:
* Indicates the completion of the stats entry, this will be the last
* stats conf HTT segment for the requested stats type.
* Value:
* 0 -> the stats retrieval is ongoing
* 1 -> the stats retrieval is complete
* - LENGTH
* Bits 31:16
* Purpose: indicate the stats information size
* Value: This field specifies the number of bytes of stats information
* that follows the element tag-length header.
* It is expected but not required that this length is a multiple of
* 4 bytes.
*/
#define HTT_T2H_EXT_STATS_COOKIE_SIZE 8
#define HTT_T2H_EXT_STATS_CONF_HDR_SIZE 4
#define HTT_T2H_EXT_STATS_CONF_TLV_HDR_SIZE 4
#define HTT_T2H_EXT_STATS_CONF_TLV_TYPE_M 0x000000ff
#define HTT_T2H_EXT_STATS_CONF_TLV_TYPE_S 0
#define HTT_T2H_EXT_STATS_CONF_TLV_STATUS_M 0x00000700
#define HTT_T2H_EXT_STATS_CONF_TLV_STATUS_S 8
#define HTT_T2H_EXT_STATS_CONF_TLV_DONE_M 0x00000800
#define HTT_T2H_EXT_STATS_CONF_TLV_DONE_S 11
#define HTT_T2H_EXT_STATS_CONF_TLV_LENGTH_M 0xffff0000
#define HTT_T2H_EXT_STATS_CONF_TLV_LENGTH_S 16
#define HTT_T2H_EXT_STATS_CONF_TLV_TYPE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_EXT_STATS_CONF_TLV_TYPE, value); \
(word) |= (value) << HTT_T2H_EXT_STATS_CONF_TLV_TYPE_S; \
} while (0)
#define HTT_T2H_EXT_STATS_CONF_TLV_TYPE_GET(word) \
(((word) & HTT_T2H_EXT_STATS_CONF_TLV_TYPE_M) >> \
HTT_T2H_EXT_STATS_CONF_TLV_TYPE_S)
#define HTT_T2H_EXT_STATS_CONF_TLV_STATUS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_EXT_STATS_CONF_TLV_STATUS, value); \
(word) |= (value) << HTT_T2H_EXT_STATS_CONF_TLV_STATUS_S; \
} while (0)
#define HTT_T2H_EXT_STATS_CONF_TLV_STATUS_GET(word) \
(((word) & HTT_T2H_EXT_STATS_CONF_TLV_STATUS_M) >> \
HTT_T2H_EXT_STATS_CONF_TLV_STATUS_S)
#define HTT_T2H_EXT_STATS_CONF_TLV_DONE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_EXT_STATS_CONF_TLV_DONE, value); \
(word) |= (value) << HTT_T2H_EXT_STATS_CONF_TLV_DONE_S; \
} while (0)
#define HTT_T2H_EXT_STATS_CONF_TLV_DONE_GET(word) \
(((word) & HTT_T2H_EXT_STATS_CONF_TLV_DONE_M) >> \
HTT_T2H_EXT_STATS_CONF_TLV_DONE_S)
#define HTT_T2H_EXT_STATS_CONF_TLV_LENGTH_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_EXT_STATS_CONF_TLV_LENGTH, value); \
(word) |= (value) << HTT_T2H_EXT_STATS_CONF_TLV_LENGTH_S; \
} while (0)
#define HTT_T2H_EXT_STATS_CONF_TLV_LENGTH_GET(word) \
(((word) & HTT_T2H_EXT_STATS_CONF_TLV_LENGTH_M) >> \
HTT_T2H_EXT_STATS_CONF_TLV_LENGTH_S)
/**
* @brief target -> host streaming statistics upload
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_STREAMING_STATS_IND
*
* @details
* The following field definitions describe the format of the HTT target
* to host streaming stats upload indication message.
* The host can use a STREAMING_STATS_REQ message to enable the target to
* produce an ongoing series of STREAMING_STATS_IND messages, and can also
* use the STREAMING_STATS_REQ message to halt the target's production of
* STREAMING_STATS_IND messages.
* The STREAMING_STATS_IND message contains a payload of TLVs containing
* the stats enabled by the host's STREAMING_STATS_REQ message.
*
* |31 8|7 0|
* |--------------------------------------------------------------|
* | reserved | msg type |
* |--------------------------------------------------------------|
* | type-specific stats info |
* | (see htt_stats.h) |
* |--------------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: Identifies this as a streaming statistics upload indication
* message.
* Value: 0x2f (HTT_T2H_MSG_TYPE_STREAMING_STATS_IND)
*/
#define HTT_T2H_STREAMING_STATS_IND_HDR_SIZE 4
typedef enum {
HTT_PEER_TYPE_DEFAULT = 0, /* Generic/Non-BSS/Self Peer */
HTT_PEER_TYPE_BSS = 1, /* Peer is BSS Peer entry */
HTT_PEER_TYPE_TDLS = 2, /* Peer is a TDLS Peer */
HTT_PEER_TYPE_OCB = 3, /* Peer is a OCB Peer */
HTT_PEER_TYPE_NAN_DATA = 4, /* Peer is NAN DATA */
HTT_PEER_TYPE_HOST_MAX = 127, /* Host <-> Target Peer type is assigned up to 127 */
/* Reserved from 128 - 255 for target internal use.*/
HTT_PEER_TYPE_ROAMOFFLOAD_TEMP = 128, /* Temporarily created during offload roam */
} HTT_PEER_TYPE;
/** macro to convert MAC address from char array to HTT word format */
#define HTT_CHAR_ARRAY_TO_MAC_ADDR(c_macaddr, phtt_mac_addr) do { \
(phtt_mac_addr)->mac_addr31to0 = \
(((c_macaddr)[0] << 0) | \
((c_macaddr)[1] << 8) | \
((c_macaddr)[2] << 16) | \
((c_macaddr)[3] << 24)); \
(phtt_mac_addr)->mac_addr47to32 = ((c_macaddr)[4] | ((c_macaddr)[5] << 8));\
} while (0)
/**
* @brief target -> host monitor mac header indication message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_MONITOR_MAC_HEADER_IND
*
* @details
* The following diagram shows the format of the monitor mac header message
* sent from the target to the host.
* This message is primarily sent when promiscuous rx mode is enabled.
* One message is sent per rx PPDU.
*
* |31 24|23 16|15 8|7 0|
* |-------------------------------------------------------------|
* | peer_id | reserved0 | msg_type |
* |-------------------------------------------------------------|
* | reserved1 | num_mpdu |
* |-------------------------------------------------------------|
* | struct hw_rx_desc |
* | (see wal_rx_desc.h) |
* |-------------------------------------------------------------|
* | struct ieee80211_frame_addr4 |
* | (see ieee80211_defs.h) |
* |-------------------------------------------------------------|
* | struct ieee80211_frame_addr4 |
* | (see ieee80211_defs.h) |
* |-------------------------------------------------------------|
* | ...... |
* |-------------------------------------------------------------|
*
* Header fields:
* - msg_type
* Bits 7:0
* Purpose: Identifies this is a monitor mac header indication message.
* Value: 0x20 (HTT_T2H_MSG_TYPE_MONITOR_MAC_HEADER_IND)
* - peer_id
* Bits 31:16
* Purpose: Software peer id given by host during association,
* During promiscuous mode, the peer ID will be invalid (0xFF)
* for rx PPDUs received from unassociated peers.
* Value: peer ID (for associated peers) or 0xFF (for unassociated peers)
* - num_mpdu
* Bits 15:0
* Purpose: The number of MPDU frame headers (struct ieee80211_frame_addr4)
* delivered within the message.
* Value: 1 to 32
* num_mpdu is limited to a maximum value of 32, due to buffer
* size limits. For PPDUs with more than 32 MPDUs, only the
* ieee80211_frame_addr4 headers from the first 32 MPDUs within
* the PPDU will be provided.
*/
#define HTT_T2H_MONITOR_MAC_HEADER_IND_HDR_SIZE 8
#define HTT_T2H_MONITOR_MAC_HEADER_PEER_ID_M 0xFFFF0000
#define HTT_T2H_MONITOR_MAC_HEADER_PEER_ID_S 16
#define HTT_T2H_MONITOR_MAC_HEADER_NUM_MPDU_M 0x0000FFFF
#define HTT_T2H_MONITOR_MAC_HEADER_NUM_MPDU_S 0
#define HTT_T2H_MONITOR_MAC_HEADER_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MONITOR_MAC_HEADER_PEER_ID, value); \
(word) |= (value) << HTT_T2H_MONITOR_MAC_HEADER_PEER_ID_S; \
} while (0)
#define HTT_T2H_MONITOR_MAC_HEADER_PEER_ID_GET(word) \
(((word) & HTT_T2H_MONITOR_MAC_HEADER_PEER_ID_M) >> \
HTT_T2H_MONITOR_MAC_HEADER_PEER_ID_S)
#define HTT_T2H_MONITOR_MAC_HEADER_NUM_MPDU_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MONITOR_MAC_HEADER_NUM_MPDU, value); \
(word) |= (value) << HTT_T2H_MONITOR_MAC_HEADER_NUM_MPDU_S; \
} while (0)
#define HTT_T2H_MONITOR_MAC_HEADER_NUM_MPDU_GET(word) \
(((word) & HTT_T2H_MONITOR_MAC_HEADER_NUM_MPDU_M) >> \
HTT_T2H_MONITOR_MAC_HEADER_NUM_MPDU_S)
/**
* @brief target -> host flow pool resize Message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_FLOW_POOL_RESIZE
*
* @details
* HTT_T2H_MSG_TYPE_FLOW_POOL_RESIZE message is sent by the target when
* the flow pool associated with the specified ID is resized
*
* The message would appear as follows:
*
* |31 16|15 8|7 0|
* |---------------------------------+----------------+----------------|
* | reserved0 | Msg type |
* |-------------------------------------------------------------------|
* | flow pool new size | flow pool ID |
* |-------------------------------------------------------------------|
*
* The message is interpreted as follows:
* b'0:7 - msg_type: This will be set to 0x21
* (HTT_T2H_MSG_TYPE_FLOW_POOL_RESIZE)
*
* b'0:15 - flow pool ID: Existing flow pool ID
*
* b'16:31 - flow pool new size: new pool size for existing flow pool ID
*
*/
PREPACK struct htt_flow_pool_resize_t {
A_UINT32 msg_type:8,
reserved0:24;
A_UINT32 flow_pool_id:16,
flow_pool_new_size:16;
} POSTPACK;
#define HTT_FLOW_POOL_RESIZE_SZ (sizeof(struct htt_flow_pool_resize_t))
#define HTT_FLOW_POOL_RESIZE_FLOW_POOL_ID_M 0x0000ffff
#define HTT_FLOW_POOL_RESIZE_FLOW_POOL_ID_S 0
#define HTT_FLOW_POOL_RESIZE_FLOW_POOL_NEW_SIZE_M 0xffff0000
#define HTT_FLOW_POOL_RESIZE_FLOW_POOL_NEW_SIZE_S 16
#define HTT_FLOW_POOL_RESIZE_FLOW_POOL_ID_GET(_var) \
(((_var) & HTT_FLOW_POOL_RESIZE_FLOW_POOL_ID_M) >> \
HTT_FLOW_POOL_RESIZE_FLOW_POOL_ID_S)
#define HTT_FLOW_POOL_RESIZE_FLOW_POOL_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_FLOW_POOL_RESIZE_FLOW_POOL_ID, _val); \
((_var) |= ((_val) << HTT_FLOW_POOL_RESIZE_FLOW_POOL_ID_S)); \
} while (0)
#define HTT_FLOW_POOL_RESIZE_FLOW_POOL_NEW_SIZE_GET(_var) \
(((_var) & HTT_FLOW_POOL_RESIZE_FLOW_POOL_NEW_SIZE_M) >> \
HTT_FLOW_POOL_RESIZE_FLOW_POOL_NEW_SIZE_S)
#define HTT_FLOW_POOL_RESIZE_FLOW_POOL_NEW_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_FLOW_POOL_RESIZE_FLOW_POOL_NEW_SIZE, _val); \
((_var) |= ((_val) << HTT_FLOW_POOL_RESIZE_FLOW_POOL_NEW_SIZE_S)); \
} while (0)
#define HTT_CFR_CAPTURE_MAGIC_PATTERN 0xCCCCCCCC
#define HTT_CFR_CAPTURE_READ_INDEX_OFFSET 0 /* bytes */
#define HTT_CFR_CAPTURE_SIZEOF_READ_INDEX_BYTES 4
#define HTT_CFR_CAPTURE_WRITE_INDEX_OFFSET /* bytes */ \
(HTT_CFR_CAPTURE_READ_INDEX_OFFSET + HTT_CFR_CAPTURE_SIZEOF_READ_INDEX_BYTES)
#define HTT_CFR_CAPTURE_SIZEOF_WRITE_INDEX_BYTES 4
#define HTT_CFR_CAPTURE_SIZEOF_MAGIC_PATTERN_BYTES 4
/*
* The read and write indices point to the data within the host buffer.
* Because the first 4 bytes of the host buffer is used for the read index and
* the next 4 bytes for the write index, the data itself starts at offset 8.
* The read index and write index are the byte offsets from the base of the
* meta-data buffer, and thus have a minimum value of 8 rather than 0.
* Refer the ASCII text picture below.
*/
#define HTT_CFR_CAPTURE_INITIAL_RW_START_INDEX \
(HTT_CFR_CAPTURE_SIZEOF_READ_INDEX_BYTES + \
HTT_CFR_CAPTURE_SIZEOF_WRITE_INDEX_BYTES)
/*
***************************************************************************
*
* Layout when CFR capture message type is 'HTT_PEER_CFR_CAPTURE_MSG_TYPE_1'
*
***************************************************************************
*
* The memory allocated by WMI_CHANNEL_CAPTURE_HOST_MEM_REQ_ID is used
* in the below format. The HTT message 'htt_cfr_dump_compl_ind' is sent by
* FW to Host whenever a CFR capture (CFR data1 or CFR data2 etc.,) is
* written into the Host memory region mentioned below.
*
* Read index is updated by the Host. At any point of time, the read index will
* indicate the index that will next be read by the Host. The read index is
* in units of bytes offset from the base of the meta-data buffer.
*
* Write index is updated by the FW. At any point of time, the write index will
* indicate from where the FW can start writing any new data. The write index is
* in units of bytes offset from the base of the meta-data buffer.
*
* If the Host is not fast enough in reading the CFR data, any new capture data
* would be dropped if there is no space left to write the new captures.
*
* The last 4 bytes of the memory region will have the magic pattern
* HTT_CFR_CAPTURE_MAGIC_PATTERN. This can be used to ensure that the FW does
* not overrun the host buffer.
*
* ,--------------------. read and write indices store the
* | | byte offset from the base of the
* | ,--------+--------. meta-data buffer to the next
* | | | | location within the data buffer
* | | v v that will be read / written
* ************************************************************************
* * Read * Write * * Magic *
* * index * index * CFR data1 ...... CFR data N * pattern *
* * (4 bytes) * (4 bytes) * * (4 bytes)*
* ************************************************************************
* |<---------- data buffer ---------->|
*
* |<----------------- meta-data buffer allocated in Host ----------------|
*
* Note:
* - Considering the 4 bytes needed to store the Read index (R) and the
* Write index (W), the initial value is as follows:
* R = W = HTT_CFR_CAPTURE_INITIAL_RW_START_INDEX
* - Buffer empty condition:
* R = W
*
* Regarding CFR data format:
* --------------------------
*
* Each CFR tone is stored in HW as 16-bits with the following format:
* {bits[15:12], bits[11:6], bits[5:0]} =
* {unsigned exponent (4 bits),
* signed mantissa_real (6 bits),
* signed mantissa_imag (6 bits)}
*
* CFR_real = mantissa_real * 2^(exponent-5)
* CFR_imag = mantissa_imag * 2^(exponent-5)
*
*
* The CFR data is written to the 16-bit unsigned output array (buff) in
* ascending tone order. For example, the Legacy20 CFR is output as follows:
*
* buff[0]: [CFR_exp[-26], CFR_mant_real[-26], CFR_mant_imag[-26]]
* buff[1]: [CFR_exp[-25], CFR_mant_real[-25], CFR_mant_imag[-25]]
* .
* .
* .
* buff[N-2]: [CFR_exp[25], CFR_mant_real[25], CFR_mant_imag[25]]
* buff[N-1]: [CFR_exp[26], CFR_mant_real[26], CFR_mant_imag[26]]
*/
/* Bandwidth of peer CFR captures */
typedef enum {
HTT_PEER_CFR_CAPTURE_BW_20MHZ = 0,
HTT_PEER_CFR_CAPTURE_BW_40MHZ = 1,
HTT_PEER_CFR_CAPTURE_BW_80MHZ = 2,
HTT_PEER_CFR_CAPTURE_BW_160MHZ = 3,
HTT_PEER_CFR_CAPTURE_BW_80_80MHZ = 4,
HTT_PEER_CFR_CAPTURE_BW_MAX,
} HTT_PEER_CFR_CAPTURE_BW;
/* Mode of the peer CFR captures. The type of RX frame for which the CFR
* was captured
*/
typedef enum {
HTT_PEER_CFR_CAPTURE_MODE_LEGACY = 0,
HTT_PEER_CFR_CAPTURE_MODE_DUP_LEGACY = 1,
HTT_PEER_CFR_CAPTURE_MODE_HT = 2,
HTT_PEER_CFR_CAPTURE_MODE_VHT = 3,
HTT_PEER_CFR_CAPTURE_MODE_MAX,
} HTT_PEER_CFR_CAPTURE_MODE;
typedef enum {
/* This message type is currently used for the below purpose:
*
* - capture_method = WMI_PEER_CFR_CAPTURE_METHOD_NULL_FRAME in the
* wmi_peer_cfr_capture_cmd.
* If payload_present bit is set to 0 then the associated memory region
* gets allocated through WMI_CHANNEL_CAPTURE_HOST_MEM_REQ_ID.
* If payload_present bit is set to 1 then CFR dump is part of the HTT
* message; the CFR dump will be present at the end of the message,
* after the chan_phy_mode.
*/
HTT_PEER_CFR_CAPTURE_MSG_TYPE_1 = 0x1,
/* Always keep this last */
HTT_PEER_CFR_CAPTURE_MSG_TYPE_MAX,
} HTT_PEER_CFR_CAPTURE_MSG_TYPE;
/**
* @brief target -> host CFR dump completion indication message definition
* htt_cfr_dump_compl_ind when the version is HTT_PEER_CFR_CAPTURE_MSG_TYPE_1.
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_CFR_DUMP_COMPL_IND
*
* @details
* The following diagram shows the format of the Channel Frequency Response
* (CFR) dump completion indication. This inidcation is sent to the Host when
* the channel capture of a peer is copied by Firmware into the Host memory
*
* **************************************************************************
*
* Message format when the CFR capture message type is
* 'HTT_PEER_CFR_CAPTURE_MSG_TYPE_1'
*
* **************************************************************************
*
* |31 16|15 |8|7 0|
* |----------------------------------------------------------------|
* header: | reserved |P| msg_type |
* word 0 | | | |
* |----------------------------------------------------------------|
* payload: | cfr_capture_msg_type |
* word 1 | |
* |----------------------------------------------------------------|
* | vdev_id | captype | chbw | sts | mode | capbw |S| req_id |
* word 2 | | | | | | | | |
* |----------------------------------------------------------------|
* | mac_addr31to0 |
* word 3 | |
* |----------------------------------------------------------------|
* | unused / reserved | mac_addr47to32 |
* word 4 | | |
* |----------------------------------------------------------------|
* | index |
* word 5 | |
* |----------------------------------------------------------------|
* | length |
* word 6 | |
* |----------------------------------------------------------------|
* | timestamp |
* word 7 | |
* |----------------------------------------------------------------|
* | counter |
* word 8 | |
* |----------------------------------------------------------------|
* | chan_mhz |
* word 9 | |
* |----------------------------------------------------------------|
* | band_center_freq1 |
* word 10 | |
* |----------------------------------------------------------------|
* | band_center_freq2 |
* word 11 | |
* |----------------------------------------------------------------|
* | chan_phy_mode |
* word 12 | |
* |----------------------------------------------------------------|
* where,
* P - payload present bit (payload_present explained below)
* req_id - memory request id (mem_req_id explained below)
* S - status field (status explained below)
* capbw - capture bandwidth (capture_bw explained below)
* mode - mode of capture (mode explained below)
* sts - space time streams (sts_count explained below)
* chbw - channel bandwidth (channel_bw explained below)
* captype - capture type (cap_type explained below)
*
* The following field definitions describe the format of the CFR dump
* completion indication sent from the target to the host
*
* Header fields:
*
* Word 0
* - msg_type
* Bits 7:0
* Purpose: Identifies this as CFR TX completion indication
* Value: 0x22 (HTT_T2H_MSG_TYPE_CFR_DUMP_COMPL_IND)
* - payload_present
* Bit 8
* Purpose: Identifies how CFR data is sent to host
* Value: 0 - If CFR Payload is written to host memory
* 1 - If CFR Payload is sent as part of HTT message
* (This is the requirement for SDIO/USB where it is
* not possible to write CFR data to host memory)
* - reserved
* Bits 31:9
* Purpose: Reserved
* Value: 0
*
* Payload fields:
*
* Word 1
* - cfr_capture_msg_type
* Bits 31:0
* Purpose: Contains the type of the message HTT_PEER_CFR_CAPTURE_MSG_TYPE
* to specify the format used for the remainder of the message
* Value: HTT_PEER_CFR_CAPTURE_MSG_TYPE_1
* (currently only MSG_TYPE_1 is defined)
*
* Word 2
* - mem_req_id
* Bits 6:0
* Purpose: Contain the mem request id of the region where the CFR capture
* has been stored - of type WMI_HOST_MEM_REQ_ID
* Value: WMI_CHANNEL_CAPTURE_HOST_MEM_REQ_ID (if payload_present is 1,
this value is invalid)
* - status
* Bit 7
* Purpose: Boolean value carrying the status of the CFR capture of the peer
* Value: 1 (True) - Successful; 0 (False) - Not successful
* - capture_bw
* Bits 10:8
* Purpose: Carry the bandwidth of the CFR capture
* Value: Bandwidth of the CFR capture of type HTT_PEER_CFR_CAPTURE_BW
* - mode
* Bits 13:11
* Purpose: Carry the mode of the rx frame for which the CFR was captured
* Value: Mode of the CFR capture of type HTT_PEER_CFR_CAPTURE_MODE
* - sts_count
* Bits 16:14
* Purpose: Carry the number of space time streams
* Value: Number of space time streams
* - channel_bw
* Bits 19:17
* Purpose: Carry the bandwidth of the channel of the vdev performing the
* measurement
* Value: Bandwidth of the channel (of type HTT_PEER_CFR_CAPTURE_BW)
* - cap_type
* Bits 23:20
* Purpose: Carry the type of the capture
* Value: Capture type (of type WMI_PEER_CFR_CAPTURE_METHOD)
* - vdev_id
* Bits 31:24
* Purpose: Carry the virtual device id
* Value: vdev ID
*
* Word 3
* - mac_addr31to0
* Bits 31:0
* Purpose: Contain the bits 31:0 of the peer MAC address
* Value: Bits 31:0 of the peer MAC address
*
* Word 4
* - mac_addr47to32
* Bits 15:0
* Purpose: Contain the bits 47:32 of the peer MAC address
* Value: Bits 47:32 of the peer MAC address
*
* Word 5
* - index
* Bits 31:0
* Purpose: Contain the index at which this CFR dump was written in the Host
* allocated memory. This index is the number of bytes from the base address.
* Value: Index position
*
* Word 6
* - length
* Bits 31:0
* Purpose: Carry the length of the CFR capture of the peer, in bytes
* Value: Length of the CFR capture of the peer
*
* Word 7
* - timestamp
* Bits 31:0
* Purpose: Carry the time at which the CFR was captured in the hardware. The
* clock used for this timestamp is private to the target and not visible to
* the host i.e., Host can interpret only the relative timestamp deltas from
* one message to the next, but can't interpret the absolute timestamp from a
* single message.
* Value: Timestamp in microseconds
*
* Word 8
* - counter
* Bits 31:0
* Purpose: Carry the count of the current CFR capture from FW. This is
* helpful to identify any drops in FW in any scenario (e.g., lack of space
* in host memory)
* Value: Count of the current CFR capture
*
* Word 9
* - chan_mhz
* Bits 31:0
* Purpose: Carry the primary 20 MHz channel frequency in MHz of the VDEV
* Value: Primary 20 channel frequency
*
* Word 10
* - band_center_freq1
* Bits 31:0
* Purpose: Carry the center frequency 1 in MHz of the VDEV
* Value: Center frequency 1 in MHz
*
* Word 11
* - band_center_freq2
* Bits 31:0
* Purpose: Carry the center frequency 2 in MHz. valid only for 11acvht of
* the VDEV
* 80plus80 mode
* Value: Center frequency 2 in MHz
*
* Word 12
* - chan_phy_mode
* Bits 31:0
* Purpose: Carry the phy mode of the channel, of the VDEV
* Value: WLAN_PHY_MODE of the channel defined in wlan_defs.h
*/
PREPACK struct htt_cfr_dump_ind_type_1 {
A_UINT32 mem_req_id:7,
status:1,
capture_bw:3,
mode:3,
sts_count:3,
channel_bw:3,
cap_type:4,
vdev_id:8;
htt_mac_addr addr;
A_UINT32 index;
A_UINT32 length;
A_UINT32 timestamp;
A_UINT32 counter;
struct htt_chan_change_msg chan;
} POSTPACK;
PREPACK struct htt_cfr_dump_compl_ind {
A_UINT32 msg_type; /* HTT_PEER_CFR_CAPTURE_MSG_TYPE */
union {
/* Message format when msg_type = HTT_PEER_CFR_CAPTURE_MSG_TYPE_1 */
struct htt_cfr_dump_ind_type_1 htt_cfr_dump_compl_ind_type_1;
/* If there is a need to change the memory layout and its associated
* HTT indication format, a new CFR capture message type can be
* introduced and added into this union.
*/
};
} POSTPACK;
/*
* Get / set macros for the bit fields within WORD-1 of htt_cfr_dump_compl_ind,
* msg_type = HTT_PEER_CFR_CAPTURE_MSG_TYPE_1
*/
#define HTT_T2H_CFR_DUMP_PAYLOAD_PRESENT_ID_M 0x00000100
#define HTT_T2H_CFR_DUMP_PAYLOAD_PRESENT_ID_S 8
#define HTT_T2H_CFR_DUMP_PAYLOAD_PRESENT_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_CFR_DUMP_PAYLOAD_PRESENT_ID, value); \
(word) |= (value) << HTT_T2H_CFR_DUMP_PAYLOAD_PRESENT_ID_S; \
} while(0)
#define HTT_T2H_CFR_DUMP_PAYLOAD_PRESENT_ID_GET(word) \
(((word) & HTT_T2H_CFR_DUMP_PAYLOAD_PRESENT_ID_M) >> \
HTT_T2H_CFR_DUMP_PAYLOAD_PRESENT_ID_S)
/*
* Get / set macros for the bit fields within WORD-2 of htt_cfr_dump_compl_ind,
* msg_type = HTT_PEER_CFR_CAPTURE_MSG_TYPE_1
*/
#define HTT_T2H_CFR_DUMP_TYPE1_MEM_REQ_ID_M 0X0000007F
#define HTT_T2H_CFR_DUMP_TYPE1_MEM_REQ_ID_S 0
#define HTT_T2H_CFR_DUMP_TYPE1_STATUS_M 0X00000080
#define HTT_T2H_CFR_DUMP_TYPE1_STATUS_S 7
#define HTT_T2H_CFR_DUMP_TYPE1_CAP_BW_M 0X00000700
#define HTT_T2H_CFR_DUMP_TYPE1_CAP_BW_S 8
#define HTT_T2H_CFR_DUMP_TYPE1_MODE_M 0X00003800
#define HTT_T2H_CFR_DUMP_TYPE1_MODE_S 11
#define HTT_T2H_CFR_DUMP_TYPE1_STS_M 0X0001C000
#define HTT_T2H_CFR_DUMP_TYPE1_STS_S 14
#define HTT_T2H_CFR_DUMP_TYPE1_CHAN_BW_M 0X000E0000
#define HTT_T2H_CFR_DUMP_TYPE1_CHAN_BW_S 17
#define HTT_T2H_CFR_DUMP_TYPE1_CAP_TYPE_M 0X00F00000
#define HTT_T2H_CFR_DUMP_TYPE1_CAP_TYPE_S 20
#define HTT_T2H_CFR_DUMP_TYPE1_VDEV_ID_M 0XFF000000
#define HTT_T2H_CFR_DUMP_TYPE1_VDEV_ID_S 24
#define HTT_T2H_CFR_DUMP_TYPE1_MEM_REQ_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_CFR_DUMP_TYPE1_MEM_REQ_ID, value); \
(word) |= (value) << HTT_T2H_CFR_DUMP_TYPE1_MEM_REQ_ID_S; \
} while (0)
#define HTT_T2H_CFR_DUMP_TYPE1_MEM_REQ_ID_GET(word) \
(((word) & HTT_T2H_CFR_DUMP_TYPE1_MEM_REQ_ID_M) >> \
HTT_T2H_CFR_DUMP_TYPE1_MEM_REQ_ID_S)
#define HTT_T2H_CFR_DUMP_TYPE1_STATUS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_CFR_DUMP_TYPE1_STATUS, value); \
(word) |= (value) << HTT_T2H_CFR_DUMP_TYPE1_STATUS_S; \
} while (0)
#define HTT_T2H_CFR_DUMP_TYPE1_STATUS_GET(word) \
(((word) & HTT_T2H_CFR_DUMP_TYPE1_STATUS_M) >> \
HTT_T2H_CFR_DUMP_TYPE1_STATUS_S)
#define HTT_T2H_CFR_DUMP_TYPE1_CAP_BW_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_CFR_DUMP_TYPE1_CAP_BW, value); \
(word) |= (value) << HTT_T2H_CFR_DUMP_TYPE1_CAP_BW_S; \
} while (0)
#define HTT_T2H_CFR_DUMP_TYPE1_CAP_BW_GET(word) \
(((word) & HTT_T2H_CFR_DUMP_TYPE1_CAP_BW_M) >> \
HTT_T2H_CFR_DUMP_TYPE1_CAP_BW_S)
#define HTT_T2H_CFR_DUMP_TYPE1_MODE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_CFR_DUMP_TYPE1_MODE, value); \
(word) |= (value) << HTT_T2H_CFR_DUMP_TYPE1_MODE_S; \
} while (0)
#define HTT_T2H_CFR_DUMP_TYPE1_MODE_GET(word) \
(((word) & HTT_T2H_CFR_DUMP_TYPE1_MODE_M) >> \
HTT_T2H_CFR_DUMP_TYPE1_MODE_S)
#define HTT_T2H_CFR_DUMP_TYPE1_STS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_CFR_DUMP_TYPE1_STS, value); \
(word) |= (value) << HTT_T2H_CFR_DUMP_TYPE1_STS_S; \
} while (0)
#define HTT_T2H_CFR_DUMP_TYPE1_STS_GET(word) \
(((word) & HTT_T2H_CFR_DUMP_TYPE1_STS_M) >> \
HTT_T2H_CFR_DUMP_TYPE1_STS_S)
#define HTT_T2H_CFR_DUMP_TYPE1_CHAN_BW_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_CFR_DUMP_TYPE1_CHAN_BW, value); \
(word) |= (value) << HTT_T2H_CFR_DUMP_TYPE1_CHAN_BW_S; \
} while (0)
#define HTT_T2H_CFR_DUMP_TYPE1_CHAN_BW_GET(word) \
(((word) & HTT_T2H_CFR_DUMP_TYPE1_CHAN_BW_M) >> \
HTT_T2H_CFR_DUMP_TYPE1_CHAN_BW_S)
#define HTT_T2H_CFR_DUMP_TYPE1_CAP_TYPE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_CFR_DUMP_TYPE1_CAP_TYPE, value); \
(word) |= (value) << HTT_T2H_CFR_DUMP_TYPE1_CAP_TYPE_S; \
} while (0)
#define HTT_T2H_CFR_DUMP_TYPE1_CAP_TYPE_GET(word) \
(((word) & HTT_T2H_CFR_DUMP_TYPE1_CAP_TYPE_M) >> \
HTT_T2H_CFR_DUMP_TYPE1_CAP_TYPE_S)
#define HTT_T2H_CFR_DUMP_TYPE1_VDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_CFR_DUMP_TYPE1_VDEV_ID, value); \
(word) |= (value) << HTT_T2H_CFR_DUMP_TYPE1_VDEV_ID_S; \
} while (0)
#define HTT_T2H_CFR_DUMP_TYPE1_VDEV_ID_GET(word) \
(((word) & HTT_T2H_CFR_DUMP_TYPE1_VDEV_ID_M) >> \
HTT_T2H_CFR_DUMP_TYPE1_VDEV_ID_S)
/**
* @brief target -> host peer (PPDU) stats message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_PEER_STATS_IND
*
* @details
* This message is generated by FW when FW is sending stats to host
* about one or more PPDUs that the FW has transmitted to one or more peers.
* This message is sent autonomously by the target rather than upon request
* by the host.
* The following field definitions describe the format of the HTT target
* to host peer stats indication message.
*
* The HTT_T2H PPDU_STATS_IND message has a header followed by one
* or more PPDU stats records.
* Each PPDU stats record uses a htt_tx_ppdu_stats_info TLV.
* If the details of N PPDUS are sent in one PEER_STATS_IND message,
* then the message would start with the
* header, followed by N htt_tx_ppdu_stats_info structures, as depicted
* below.
*
* |31 16|15|14|13 11|10 9|8|7 0|
* |-------------------------------------------------------------|
* | reserved |MSG_TYPE |
* |-------------------------------------------------------------|
* rec 0 | TLV header |
* rec 0 |-------------------------------------------------------------|
* rec 0 | ppdu successful bytes |
* rec 0 |-------------------------------------------------------------|
* rec 0 | ppdu retry bytes |
* rec 0 |-------------------------------------------------------------|
* rec 0 | ppdu failed bytes |
* rec 0 |-------------------------------------------------------------|
* rec 0 | peer id | S|SG| BW | BA |A|rate code|
* rec 0 |-------------------------------------------------------------|
* rec 0 | retried MSDUs | successful MSDUs |
* rec 0 |-------------------------------------------------------------|
* rec 0 | TX duration | failed MSDUs |
* rec 0 |-------------------------------------------------------------|
* ...
* |-------------------------------------------------------------|
* rec N | TLV header |
* rec N |-------------------------------------------------------------|
* rec N | ppdu successful bytes |
* rec N |-------------------------------------------------------------|
* rec N | ppdu retry bytes |
* rec N |-------------------------------------------------------------|
* rec N | ppdu failed bytes |
* rec N |-------------------------------------------------------------|
* rec N | peer id | S|SG| BW | BA |A|rate code|
* rec N |-------------------------------------------------------------|
* rec N | retried MSDUs | successful MSDUs |
* rec N |-------------------------------------------------------------|
* rec N | TX duration | failed MSDUs |
* rec N |-------------------------------------------------------------|
*
* where:
* A = is A-MPDU flag
* BA = block-ack failure flags
* BW = bandwidth spec
* SG = SGI enabled spec
* S = skipped rate ctrl
* One htt_tx_ppdu_stats_info instance will have stats for one PPDU
*
* Header
* ------
* dword0 - b'0:7 - msg_type : 0x23 (HTT_T2H_MSG_TYPE_PEER_STATS_IND)
* dword0 - b'8:31 - reserved : Reserved for future use
*
* payload include below peer_stats information
* --------------------------------------------
* @TLV : HTT_PPDU_STATS_INFO_TLV
* @tx_success_bytes : total successful bytes in the PPDU.
* @tx_retry_bytes : total retried bytes in the PPDU.
* @tx_failed_bytes : total failed bytes in the PPDU.
* @tx_ratecode : rate code used for the PPDU.
* @is_ampdu : Indicates PPDU is AMPDU or not.
* @ba_ack_failed : BA/ACK failed for this PPDU
* b00 -> BA received
* b01 -> BA failed once
* b10 -> BA failed twice, when HW retry is enabled.
* @bw : BW
* b00 -> 20 MHz
* b01 -> 40 MHz
* b10 -> 80 MHz
* b11 -> 160 MHz (or 80+80)
* @sg : SGI enabled
* @s : skipped ratectrl
* @peer_id : peer id
* @tx_success_msdus : successful MSDUs
* @tx_retry_msdus : retried MSDUs
* @tx_failed_msdus : MSDUs dropped in FW after max retry
* @tx_duration : Tx duration for the PPDU (microsecond units)
*/
/**
* @brief target -> host backpressure event
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_BKPRESSURE_EVENT_IND
*
* @details
* HTT_T2H_MSG_TYPE_BKPRESSURE_EVENTID message is sent by the target when
* continuous backpressure is seen in the LMAC/ UMAC rings software rings.
* This message will only be sent if the backpressure condition has existed
* continuously for an initial period (100 ms).
* Repeat messages with updated information will be sent after each
* subsequent period (100 ms) as long as the backpressure remains unabated.
* This message indicates the ring id along with current head and tail index
* locations (i.e. write and read indices).
* The backpressure time indicates the time in ms for which continuous
* backpressure has been observed in the ring.
*
* The message format is as follows:
*
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | ring_id | ring_type | pdev_id | msg_type |
* |-------------------------------------------------------------------|
* | tail_idx | head_idx |
* |-------------------------------------------------------------------|
* | backpressure_time_ms |
* |-------------------------------------------------------------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to 0x24
* (HTT_T2H_MSG_TYPE_BKPRESSURE_EVENT_IND)
* b'8:15 - pdev_id: 0 indicates msg is for UMAC ring.
* 1, 2, 3 indicates pdev_id 0,1,2 and
* the msg is for LMAC ring.
* b'16:23 - ring_type: Refer to enum htt_backpressure_ring_type.
* b'24:31 - ring_id: Refer enum htt_backpressure_umac_ring_id/
* htt_backpressure_lmac_ring_id. This represents
* the ring id for which continuous backpressure
* is seen
*
* dword1 - b'0:15 - head_idx: This indicates the current head index of
* the ring indicated by the ring_id
*
* dword1 - b'16:31 - tail_idx: This indicates the current tail index of
* the ring indicated by the ring id
*
* dword2 - b'0:31 - backpressure_time_ms: Indicates how long continuous
* backpressure has been seen in the ring
* indicated by the ring_id.
* Units = milliseconds
*/
#define HTT_T2H_RX_BKPRESSURE_PDEV_ID_M 0x0000ff00
#define HTT_T2H_RX_BKPRESSURE_PDEV_ID_S 8
#define HTT_T2H_RX_BKPRESSURE_RING_TYPE_M 0x00ff0000
#define HTT_T2H_RX_BKPRESSURE_RING_TYPE_S 16
#define HTT_T2H_RX_BKPRESSURE_RINGID_M 0xff000000
#define HTT_T2H_RX_BKPRESSURE_RINGID_S 24
#define HTT_T2H_RX_BKPRESSURE_HEAD_IDX_M 0x0000ffff
#define HTT_T2H_RX_BKPRESSURE_HEAD_IDX_S 0
#define HTT_T2H_RX_BKPRESSURE_TAIL_IDX_M 0xffff0000
#define HTT_T2H_RX_BKPRESSURE_TAIL_IDX_S 16
#define HTT_T2H_RX_BKPRESSURE_TIME_MS_M 0xffffffff
#define HTT_T2H_RX_BKPRESSURE_TIME_MS_S 0
#define HTT_T2H_RX_BKPRESSURE_PDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_RX_BKPRESSURE_PDEV_ID, value); \
(word) |= (value) << HTT_T2H_RX_BKPRESSURE_PDEV_ID_S; \
} while (0)
#define HTT_T2H_RX_BKPRESSURE_PDEV_ID_GET(word) \
(((word) & HTT_T2H_RX_BKPRESSURE_PDEV_ID_M) >> \
HTT_T2H_RX_BKPRESSURE_PDEV_ID_S)
#define HTT_T2H_RX_BKPRESSURE_RING_TYPE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_RX_BKPRESSURE_RING_TYPE, value); \
(word) |= (value) << HTT_T2H_RX_BKPRESSURE_RING_TYPE_S; \
} while (0)
#define HTT_T2H_RX_BKPRESSURE_RING_TYPE_GET(word) \
(((word) & HTT_T2H_RX_BKPRESSURE_RING_TYPE_M) >> \
HTT_T2H_RX_BKPRESSURE_RING_TYPE_S)
#define HTT_T2H_RX_BKPRESSURE_RINGID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_RX_BKPRESSURE_RINGID, value); \
(word) |= (value) << HTT_T2H_RX_BKPRESSURE_RINGID_S; \
} while (0)
#define HTT_T2H_RX_BKPRESSURE_RINGID_GET(word) \
(((word) & HTT_T2H_RX_BKPRESSURE_RINGID_M) >> \
HTT_T2H_RX_BKPRESSURE_RINGID_S)
#define HTT_T2H_RX_BKPRESSURE_HEAD_IDX_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_RX_BKPRESSURE_HEAD_IDX, value); \
(word) |= (value) << HTT_T2H_RX_BKPRESSURE_HEAD_IDX_S; \
} while (0)
#define HTT_T2H_RX_BKPRESSURE_HEAD_IDX_GET(word) \
(((word) & HTT_T2H_RX_BKPRESSURE_HEAD_IDX_M) >> \
HTT_T2H_RX_BKPRESSURE_HEAD_IDX_S)
#define HTT_T2H_RX_BKPRESSURE_TAIL_IDX_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_RX_BKPRESSURE_TAIL_IDX, value); \
(word) |= (value) << HTT_T2H_RX_BKPRESSURE_TAIL_IDX_S; \
} while (0)
#define HTT_T2H_RX_BKPRESSURE_TAIL_IDX_GET(word) \
(((word) & HTT_T2H_RX_BKPRESSURE_TAIL_IDX_M) >> \
HTT_T2H_RX_BKPRESSURE_TAIL_IDX_S)
#define HTT_T2H_RX_BKPRESSURE_TIME_MS_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_RX_BKPRESSURE_TIME_MS, value); \
(word) |= (value) << HTT_T2H_RX_BKPRESSURE_TIME_MS_S; \
} while (0)
#define HTT_T2H_RX_BKPRESSURE_TIME_MS_GET(word) \
(((word) & HTT_T2H_RX_BKPRESSURE_TIME_MS_M) >> \
HTT_T2H_RX_BKPRESSURE_TIME_MS_S)
enum htt_backpressure_ring_type {
HTT_SW_RING_TYPE_UMAC,
HTT_SW_RING_TYPE_LMAC,
HTT_SW_RING_TYPE_MAX,
};
/* Ring id for which the message is sent to host */
enum htt_backpressure_umac_ringid {
HTT_SW_RING_IDX_REO_REO2SW1_RING,
HTT_SW_RING_IDX_REO_REO2SW2_RING,
HTT_SW_RING_IDX_REO_REO2SW3_RING,
HTT_SW_RING_IDX_REO_REO2SW4_RING,
HTT_SW_RING_IDX_REO_WBM2REO_LINK_RING,
HTT_SW_RING_IDX_REO_REO2TCL_RING,
HTT_SW_RING_IDX_REO_REO2FW_RING,
HTT_SW_RING_IDX_REO_REO_RELEASE_RING,
HTT_SW_RING_IDX_WBM_PPE_RELEASE_RING,
HTT_SW_RING_IDX_TCL_TCL2TQM_RING,
HTT_SW_RING_IDX_WBM_TQM_RELEASE_RING,
HTT_SW_RING_IDX_WBM_REO_RELEASE_RING,
HTT_SW_RING_IDX_WBM_WBM2SW0_RELEASE_RING,
HTT_SW_RING_IDX_WBM_WBM2SW1_RELEASE_RING,
HTT_SW_RING_IDX_WBM_WBM2SW2_RELEASE_RING,
HTT_SW_RING_IDX_WBM_WBM2SW3_RELEASE_RING,
HTT_SW_RING_IDX_REO_REO_CMD_RING,
HTT_SW_RING_IDX_REO_REO_STATUS_RING,
HTT_SW_UMAC_RING_IDX_MAX,
};
enum htt_backpressure_lmac_ringid {
HTT_SW_RING_IDX_FW2RXDMA_BUF_RING,
HTT_SW_RING_IDX_FW2RXDMA_STATUS_RING,
HTT_SW_RING_IDX_FW2RXDMA_LINK_RING,
HTT_SW_RING_IDX_SW2RXDMA_BUF_RING,
HTT_SW_RING_IDX_WBM2RXDMA_LINK_RING,
HTT_SW_RING_IDX_RXDMA2FW_RING,
HTT_SW_RING_IDX_RXDMA2SW_RING,
HTT_SW_RING_IDX_RXDMA2RELEASE_RING,
HTT_SW_RING_IDX_RXDMA2REO_RING,
HTT_SW_RING_IDX_MONITOR_STATUS_RING,
HTT_SW_RING_IDX_MONITOR_BUF_RING,
HTT_SW_RING_IDX_MONITOR_DESC_RING,
HTT_SW_RING_IDX_MONITOR_DEST_RING,
HTT_SW_LMAC_RING_IDX_MAX,
};
PREPACK struct htt_t2h_msg_bkpressure_event_ind_t {
A_UINT32 msg_type: 8, /* HTT_T2H_MSG_TYPE_BKPRESSURE_EVENT_IND */
pdev_id: 8,
ring_type: 8, /* htt_backpressure_ring_type */
/*
* ring_id holds an enum value from either
* htt_backpressure_umac_ringid or
* htt_backpressure_lmac_ringid, based on
* the ring_type setting.
*/
ring_id: 8;
A_UINT16 head_idx;
A_UINT16 tail_idx;
A_UINT32 backpressure_time_ms; /* Time in milliseconds for which backpressure is seen continuously */
} POSTPACK;
/*
* Defines two 32 bit words that can be used by the target to indicate a per
* user RU allocation and rate information.
*
* This information is currently provided in the "sw_response_reference_ptr"
* (word 0) and "sw_response_reference_ptr_ext" (word 1) fields of the
* "rx_ppdu_end_user_stats" TLV.
*
* VALID:
* The consumer of these words must explicitly check the valid bit,
* and only attempt interpretation of any of the remaining fields if
* the valid bit is set to 1.
*
* VERSION:
* The consumer of these words must also explicitly check the version bit,
* and only use the V0 definition if the VERSION field is set to 0.
*
* Version 1 is currently undefined, with the exception of the VALID and
* VERSION fields.
*
* Version 0:
*
* The fields below are duplicated per BW.
*
* The consumer must determine which BW field to use, based on the UL OFDMA
* PPDU BW indicated by HW.
*
* RU_START: RU26 start index for the user.
* Note that this is always using the RU26 index, regardless
* of the actual RU assigned to the user
* (i.e. the second RU52 is RU_START 2, RU_SIZE
* HTT_UL_OFDMA_V0_RU_SIZE_RU_52)
*
* For example, 20MHz (the value in the top row is RU_START)
*
* RU Size 0 (26): |0|1|2|3|4|5|6|7|8|
* RU Size 1 (52): | | | | | |
* RU Size 2 (106): | | | |
* RU Size 3 (242): | |
*
* RU_SIZE: Indicates the RU size, as defined by enum
* htt_ul_ofdma_user_info_ru_size.
*
* LDPC: LDPC enabled (if 0, BCC is used)
*
* DCM: DCM enabled
*
* |31 | 30|29 23|22 19|18 16|15 9| 8 | 7 |6 3|2 0|
* |---------------------------------+--------------------------------|
* |Ver|Valid| FW internal |
* |---------------------------------+--------------------------------|
* | reserved |Trig Type|RU SIZE| RU START |DCM|LDPC|MCS |NSS|
* |---------------------------------+--------------------------------|
*/
enum htt_ul_ofdma_user_info_ru_size {
HTT_UL_OFDMA_V0_RU_SIZE_RU_26,
HTT_UL_OFDMA_V0_RU_SIZE_RU_52,
HTT_UL_OFDMA_V0_RU_SIZE_RU_106,
HTT_UL_OFDMA_V0_RU_SIZE_RU_242,
HTT_UL_OFDMA_V0_RU_SIZE_RU_484,
HTT_UL_OFDMA_V0_RU_SIZE_RU_996,
HTT_UL_OFDMA_V0_RU_SIZE_RU_996x2
};
/* htt_up_ofdma_user_info_v0 provides an abstract view of the info */
struct htt_ul_ofdma_user_info_v0 {
A_UINT32 word0;
A_UINT32 word1;
};
#define HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W0 \
A_UINT32 w0_fw_rsvd:29; \
A_UINT32 w0_manual_ulofdma_trig:1; \
A_UINT32 w0_valid:1; \
A_UINT32 w0_version:1;
struct htt_ul_ofdma_user_info_v0_bitmap_w0 {
HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W0
};
#define HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W1 \
A_UINT32 w1_nss:3; \
A_UINT32 w1_mcs:4; \
A_UINT32 w1_ldpc:1; \
A_UINT32 w1_dcm:1; \
A_UINT32 w1_ru_start:7; \
A_UINT32 w1_ru_size:3; \
A_UINT32 w1_trig_type:4; \
A_UINT32 w1_unused:9;
struct htt_ul_ofdma_user_info_v0_bitmap_w1 {
HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W1
};
#define HTT_UL_OFDMA_USER_INFO_V1_BITMAP_W0 \
A_UINT32 w0_fw_rsvd:27; \
A_UINT32 w0_sub_version:3; /* set to a value of "0" on WKK/Beryllium targets (future expansion) */ \
A_UINT32 w0_valid:1; /* field aligns with V0 definition */ \
A_UINT32 w0_version:1; /* set to a value of "1" to indicate picking htt_ul_ofdma_user_info_v1_bitmap (field aligns with V0 definition) */
struct htt_ul_ofdma_user_info_v1_bitmap_w0 {
HTT_UL_OFDMA_USER_INFO_V1_BITMAP_W0
};
#define HTT_UL_OFDMA_USER_INFO_V1_BITMAP_W1 \
A_UINT32 w1_unused_0_to_18:19; /* Guaranteed to be set to 0, can be used for future expansion without bumping version again. */ \
A_UINT32 w1_trig_type:4; \
A_UINT32 w1_unused_23_to_31:9; /* Guaranteed to be set to 0, can be used for future expansion without bumping version again. */
struct htt_ul_ofdma_user_info_v1_bitmap_w1 {
HTT_UL_OFDMA_USER_INFO_V1_BITMAP_W1
};
/* htt_ul_ofdma_user_info_v0_bitmap shows what bitfields are within the info */
PREPACK struct htt_ul_ofdma_user_info_v0_bitmap {
union {
A_UINT32 word0;
struct {
HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W0
};
};
union {
A_UINT32 word1;
struct {
HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W1
};
};
} POSTPACK;
/*
* htt_ul_ofdma_user_info_v1_bitmap bits are aligned to
* htt_ul_ofdma_user_info_v0_bitmap, based on the w0_version
* this should be picked.
*/
PREPACK struct htt_ul_ofdma_user_info_v1_bitmap {
union {
A_UINT32 word0;
struct {
HTT_UL_OFDMA_USER_INFO_V1_BITMAP_W0
};
};
union {
A_UINT32 word1;
struct {
HTT_UL_OFDMA_USER_INFO_V1_BITMAP_W1
};
};
} POSTPACK;
enum HTT_UL_OFDMA_TRIG_TYPE {
HTT_UL_OFDMA_USER_INFO_V0_TRIG_TYPE_BASIC = 0,
HTT_UL_OFDMA_USER_INFO_V0_TRIG_TYPE_BFRP,
HTT_UL_OFDMA_USER_INFO_V0_TRIG_TYPE_MU_BAR,
HTT_UL_OFDMA_USER_INFO_V0_TRIG_TYPE_MU_RTS_CTS,
HTT_UL_OFDMA_USER_INFO_V0_TRIG_TYPE_BSR,
};
#define HTT_UL_OFDMA_USER_INFO_V0_SZ (sizeof(struct htt_ul_ofdma_user_info_v0))
#define HTT_UL_OFDMA_USER_INFO_V0_W0_FW_INTERNAL_M 0x0000ffff
#define HTT_UL_OFDMA_USER_INFO_V0_W0_FW_INTERNAL_S 0
#define HTT_UL_OFDMA_USER_INFO_V0_W0_MANUAL_ULOFDMA_TRIG_M 0x20000000
#define HTT_UL_OFDMA_USER_INFO_V0_W0_MANUAL_ULOFDMA_TRIG_S 29
#define HTT_UL_OFDMA_USER_INFO_V0_W0_VALID_M 0x40000000
#define HTT_UL_OFDMA_USER_INFO_V0_W0_VALID_S 30
#define HTT_UL_OFDMA_USER_INFO_V0_W0_VER_M 0x80000000
#define HTT_UL_OFDMA_USER_INFO_V0_W0_VER_S 31
#define HTT_UL_OFDMA_USER_INFO_V0_W1_NSS_M 0x00000007
#define HTT_UL_OFDMA_USER_INFO_V0_W1_NSS_S 0
#define HTT_UL_OFDMA_USER_INFO_V0_W1_MCS_M 0x00000078
#define HTT_UL_OFDMA_USER_INFO_V0_W1_MCS_S 3
#define HTT_UL_OFDMA_USER_INFO_V0_W1_LDPC_M 0x00000080
#define HTT_UL_OFDMA_USER_INFO_V0_W1_LDPC_S 7
#define HTT_UL_OFDMA_USER_INFO_V0_W1_DCM_M 0x00000100
#define HTT_UL_OFDMA_USER_INFO_V0_W1_DCM_S 8
#define HTT_UL_OFDMA_USER_INFO_V0_W1_RU_START_M 0x0000fe00
#define HTT_UL_OFDMA_USER_INFO_V0_W1_RU_START_S 9
#define HTT_UL_OFDMA_USER_INFO_V0_W1_RU_SIZE_M 0x00070000
#define HTT_UL_OFDMA_USER_INFO_V0_W1_RU_SIZE_S 16
#define HTT_UL_OFDMA_USER_INFO_V0_W1_TRIG_TYP_M 0x00780000
#define HTT_UL_OFDMA_USER_INFO_V0_W1_TRIG_TYP_S 19
#define HTT_UL_OFDMA_USER_INFO_V0_W1_RESERVED1_M 0xff800000
#define HTT_UL_OFDMA_USER_INFO_V0_W1_RESERVED1_S 23
/*--- word 0 ---*/
#define HTT_UL_OFDMA_USER_INFO_V0_W0_FW_INTERNAL_GET(word) \
(((word) & HTT_UL_OFDMA_USER_INFO_V0_W0_FW_INTERNAL_M) >> HTT_UL_OFDMA_USER_INFO_V0_W0_FW_INTERNAL_S)
#define HTT_UL_OFDMA_USER_INFO_V0_W0_FW_INTERNAL_SET(word, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UL_OFDMA_USER_INFO_V0_W0_FW_INTERNAL, _val); \
((word) |= ((_val) << HTT_UL_OFDMA_USER_INFO_V0_W0_FW_INTERNAL_S)); \
} while (0)
#define HTT_UL_OFDMA_USER_INFO_V0_W0_VALID_GET(word) \
(((word) & HTT_UL_OFDMA_USER_INFO_V0_W0_VALID_M) >> HTT_UL_OFDMA_USER_INFO_V0_W0_VALID_S)
#define HTT_UL_OFDMA_USER_INFO_V0_W0_VALID_SET(word, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UL_OFDMA_USER_INFO_V0_W0_VALID, _val); \
((word) |= ((_val) << HTT_UL_OFDMA_USER_INFO_V0_W0_VALID_S)); \
} while (0)
#define HTT_UL_OFDMA_USER_INFO_V0_W0_VER_GET(word) \
(((word) & HTT_UL_OFDMA_USER_INFO_V0_W0_VER_M) >> HTT_UL_OFDMA_USER_INFO_V0_W0_VER_S)
#define HTT_UL_OFDMA_USER_INFO_V0_W0_VER_SET(word, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UL_OFDMA_USER_INFO_V0_W0_VER, _val); \
((word) |= ((_val) << HTT_UL_OFDMA_USER_INFO_V0_W0_VER_S)); \
} while (0)
/*--- word 1 ---*/
#define HTT_UL_OFDMA_USER_INFO_V0_W1_NSS_GET(word) \
(((word) & HTT_UL_OFDMA_USER_INFO_V0_W1_NSS_M) >> HTT_UL_OFDMA_USER_INFO_V0_W1_NSS_S)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_NSS_SET(word, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UL_OFDMA_USER_INFO_V0_W1_NSS, _val); \
((word) |= ((_val) << HTT_UL_OFDMA_USER_INFO_V0_W1_NSS_S)); \
} while (0)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_MCS_GET(word) \
(((word) & HTT_UL_OFDMA_USER_INFO_V0_W1_MCS_M) >> HTT_UL_OFDMA_USER_INFO_V0_W1_MCS_S)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_MCS_SET(word, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UL_OFDMA_USER_INFO_V0_W1_MCS, _val); \
((word) |= ((_val) << HTT_UL_OFDMA_USER_INFO_V0_W1_MCS_S)); \
} while (0)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_LDPC_GET(word) \
(((word) & HTT_UL_OFDMA_USER_INFO_V0_W1_LDPC_M) >> HTT_UL_OFDMA_USER_INFO_V0_W1_LDPC_S)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_LDPC_SET(word, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UL_OFDMA_USER_INFO_V0_W1_LDPC, _val); \
((word) |= ((_val) << HTT_UL_OFDMA_USER_INFO_V0_W1_LDPC_S)); \
} while (0)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_DCM_GET(word) \
(((word) & HTT_UL_OFDMA_USER_INFO_V0_W1_DCM_M) >> HTT_UL_OFDMA_USER_INFO_V0_W1_DCM_S)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_DCM_SET(word, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UL_OFDMA_USER_INFO_V0_W1_DCM, _val); \
((word) |= ((_val) << HTT_UL_OFDMA_USER_INFO_V0_W1_DCM_S)); \
} while (0)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_RU_START_GET(word) \
(((word) & HTT_UL_OFDMA_USER_INFO_V0_W1_RU_START_M) >> HTT_UL_OFDMA_USER_INFO_V0_W1_RU_START_S)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_RU_START_SET(word, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UL_OFDMA_USER_INFO_V0_W1_RU_START, _val); \
((word) |= ((_val) << HTT_UL_OFDMA_USER_INFO_V0_W1_RU_START_S)); \
} while (0)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_RU_SIZE_GET(word) \
(((word) & HTT_UL_OFDMA_USER_INFO_V0_W1_RU_SIZE_M) >> HTT_UL_OFDMA_USER_INFO_V0_W1_RU_SIZE_S)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_RU_SIZE_SET(word, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UL_OFDMA_USER_INFO_V0_W1_RU_SIZE, _val); \
((word) |= ((_val) << HTT_UL_OFDMA_USER_INFO_V0_W1_RU_SIZE_S)); \
} while (0)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_TRIG_TYP_GET(word) \
(((word) & HTT_UL_OFDMA_USER_INFO_V0_W1_TRIG_TYP_M) >> HTT_UL_OFDMA_USER_INFO_V0_W1_TRIG_TYP_S)
#define HTT_UL_OFDMA_USER_INFO_V0_W1_TRIG_TYP_SET(word, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_UL_OFDMA_USER_INFO_V0_W1_RU_TRIG_TYP, _val); \
((word) |= ((_val) << HTT_UL_OFDMA_USER_INFO_V0_W1_RU_TRIG_TYP_S)); \
} while (0)
/**
* @brief target -> host channel calibration data message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_CHAN_CALDATA
*
* @brief host -> target channel calibration data message
*
* MSG_TYPE => HTT_H2T_MSG_TYPE_CHAN_CALDATA
*
* @details
* The following field definitions describe the format of the channel
* calibration data message sent from the target to the host when
* MSG_TYPE is HTT_T2H_MSG_TYPE_CHAN_CALDATA, and sent from the host
* to the target when MSG_TYPE is HTT_H2T_MSG_TYPE_CHAN_CALDATA.
* The message is defined as htt_chan_caldata_msg followed by a variable
* number of 32-bit character values.
*
* |31 21|20|19 16|15 13| 12|11 8|7 0|
* |------------------------------------------------------------------|
* | rsv | A| frag | rsv |ck_v| sub_type| msg type |
* |------------------------------------------------------------------|
* | payload size | mhz |
* |------------------------------------------------------------------|
* | center frequency 2 | center frequency 1 |
* |------------------------------------------------------------------|
* | check sum |
* |------------------------------------------------------------------|
* | payload |
* |------------------------------------------------------------------|
* message info field:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a channel calibration data message
* Value: 0x25 (HTT_T2H_MSG_TYPE_CHAN_CALDATA)
* 0x14 (HTT_H2T_MSG_TYPE_CHAN_CALDATA)
* - SUB_TYPE
* Bits 11:8
* Purpose: T2H: indicates whether target is providing chan cal data
* to the host to store, or requesting that the host
* download previously-stored data.
* H2T: indicates whether the host is providing the requested
* channel cal data, or if it is rejecting the data
* request because it does not have the requested data.
* Value: see HTT_T2H_MSG_CHAN_CALDATA_xxx defs
* - CHKSUM_VALID
* Bit 12
* Purpose: indicates if the checksum field is valid
* value:
* - FRAG
* Bit 19:16
* Purpose: indicates the fragment index for message
* value: 0 for first fragment, 1 for second fragment, ...
* - APPEND
* Bit 20
* Purpose: indicates if this is the last fragment
* value: 0 = final fragment, 1 = more fragments will be appended
*
* channel and payload size field
* - MHZ
* Bits 15:0
* Purpose: indicates the channel primary frequency
* Value:
* - PAYLOAD_SIZE
* Bits 31:16
* Purpose: indicates the bytes of calibration data in payload
* Value:
*
* center frequency field
* - CENTER FREQUENCY 1
* Bits 15:0
* Purpose: indicates the channel center frequency
* Value: channel center frequency, in MHz units
* - CENTER FREQUENCY 2
* Bits 31:16
* Purpose: indicates the secondary channel center frequency,
* only for 11acvht 80plus80 mode
* Value: secondary channel center frequency, in MHz units, if applicable
*
* checksum field
* - CHECK_SUM
* Bits 31:0
* Purpose: check the payload data, it is just for this fragment.
* This is intended for the target to check that the channel
* calibration data returned by the host is the unmodified data
* that was previously provided to the host by the target.
* value: checksum of fragment payload
*/
PREPACK struct htt_chan_caldata_msg {
/* DWORD 0: message info */
A_UINT32
msg_type: 8,
sub_type: 4 ,
chksum_valid: 1, /** 1:valid, 0:invalid */
reserved1: 3,
frag_idx: 4, /** fragment index for calibration data */
appending: 1, /** 0: no fragment appending,
* 1: extra fragment appending */
reserved2: 11;
/* DWORD 1: channel and payload size */
A_UINT32
mhz: 16, /** primary 20 MHz channel frequency in mhz */
payload_size: 16; /** unit: bytes */
/* DWORD 2: center frequency */
A_UINT32
band_center_freq1: 16, /** Center frequency 1 in MHz */
band_center_freq2: 16; /** Center frequency 2 in MHz,
* valid only for 11acvht 80plus80 mode */
/* DWORD 3: check sum */
A_UINT32 chksum;
/* variable length for calibration data */
A_UINT32 payload[1/* or more */];
} POSTPACK;
/* T2H SUBTYPE */
#define HTT_T2H_MSG_CHAN_CALDATA_REQ 0
#define HTT_T2H_MSG_CHAN_CALDATA_UPLOAD 1
/* H2T SUBTYPE */
#define HTT_H2T_MSG_CHAN_CALDATA_REJ 0
#define HTT_H2T_MSG_CHAN_CALDATA_DOWNLOAD 1
#define HTT_CHAN_CALDATA_MSG_SUB_TYPE_S 8
#define HTT_CHAN_CALDATA_MSG_SUB_TYPE_M 0x00000f00
#define HTT_CHAN_CALDATA_MSG_SUB_TYPE_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_SUB_TYPE_M) >> HTT_CHAN_CALDATA_MSG_SUB_TYPE_S)
#define HTT_CHAN_CALDATA_MSG_SUB_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_SUB_TYPE, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_SUB_TYPE_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_CHKSUM_V_S 12
#define HTT_CHAN_CALDATA_MSG_CHKSUM_V_M 0x00001000
#define HTT_CHAN_CALDATA_MSG_CHKSUM_V_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_CHKSUM_V_M) >> HTT_CHAN_CALDATA_MSG_CHKSUM_V_S)
#define HTT_CHAN_CALDATA_MSG_CHKSUM_V_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_CHKSUM_V, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_CHKSUM_V_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_FRAG_IDX_S 16
#define HTT_CHAN_CALDATA_MSG_FRAG_IDX_M 0x000f0000
#define HTT_CHAN_CALDATA_MSG_FRAG_IDX_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_FRAG_IDX_M) >> HTT_CHAN_CALDATA_MSG_FRAG_IDX_S)
#define HTT_CHAN_CALDATA_MSG_FRAG_IDX_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_FRAG_IDX, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_FRAG_IDX_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_APPENDING_S 20
#define HTT_CHAN_CALDATA_MSG_APPENDING_M 0x00100000
#define HTT_CHAN_CALDATA_MSG_APPENDING_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_APPENDING_M) >> HTT_CHAN_CALDATA_MSG_APPENDING_S)
#define HTT_CHAN_CALDATA_MSG_APPENDING_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_APPENDING, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_APPENDING_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_MHZ_S 0
#define HTT_CHAN_CALDATA_MSG_MHZ_M 0x0000ffff
#define HTT_CHAN_CALDATA_MSG_MHZ_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_MHZ_M) >> HTT_CHAN_CALDATA_MSG_MHZ_S)
#define HTT_CHAN_CALDATA_MSG_MHZ_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_MHZ, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_MHZ_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_PLD_SIZE_S 16
#define HTT_CHAN_CALDATA_MSG_PLD_SIZE_M 0xffff0000
#define HTT_CHAN_CALDATA_MSG_PLD_SIZE_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_PLD_SIZE_M) >> HTT_CHAN_CALDATA_MSG_PLD_SIZE_S)
#define HTT_CHAN_CALDATA_MSG_PLD_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_PLD_SIZE, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_PLD_SIZE_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_FREQ1_S 0
#define HTT_CHAN_CALDATA_MSG_FREQ1_M 0x0000ffff
#define HTT_CHAN_CALDATA_MSG_FREQ1_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_FREQ1_M) >> HTT_CHAN_CALDATA_MSG_FREQ1_S)
#define HTT_CHAN_CALDATA_MSG_FREQ1_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_FREQ1, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_FREQ1_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_FREQ2_S 16
#define HTT_CHAN_CALDATA_MSG_FREQ2_M 0xffff0000
#define HTT_CHAN_CALDATA_MSG_FREQ2_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_FREQ2_M) >> HTT_CHAN_CALDATA_MSG_FREQ2_S)
#define HTT_CHAN_CALDATA_MSG_FREQ2_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_FREQ2, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_FREQ2_S)); \
} while (0)
/**
* @brief target -> host FSE CMEM based send
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_FSE_CMEM_BASE_SEND
*
* @details
* HTT_T2H_MSG_TYPE_FSE_CMEM_BASE_SEND message is sent by the target when
* FSE placement in CMEM is enabled.
*
* This message sends the non-secure CMEM base address.
* It will be sent to host in response to message
* HTT_H2T_MSG_TYPE_RX_FSE_SETUP_CFG.
* The message would appear as follows:
*
* |31 24|23 16|15 8|7 0|
* |----------------+----------------+----------------+----------------|
* | reserved | num_entries | msg_type |
* |----------------+----------------+----------------+----------------|
* | base_address_lo |
* |----------------+----------------+----------------+----------------|
* | base_address_hi |
* |-------------------------------------------------------------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to 0x27
* (HTT_T2H_MSG_TYPE_FSE_CMEM_BASE_SEND)
* b'8:15 - number_entries: Indicated the number of entries
* programmed.
* b'16:31 - reserved.
* dword1 - b'0:31 - base_address_lo: Indicate lower 32 bits of
* CMEM base address
* dword2 - b'0:31 - base_address_hi: Indicate upper 32 bits of
* CMEM base address
*/
PREPACK struct htt_cmem_base_send_t {
A_UINT32 msg_type: 8,
num_entries: 8,
reserved: 16;
A_UINT32 base_address_lo;
A_UINT32 base_address_hi;
} POSTPACK;
#define HTT_CMEM_BASE_SEND_SIZE (sizeof(struct htt_cmem_base_send_t))
#define HTT_CMEM_BASE_SEND_NUM_ENTRIES_M 0x0000FF00
#define HTT_CMEM_BASE_SEND_NUM_ENTRIES_S 8
#define HTT_CMEM_BASE_SEND_NUM_ENTRIES_GET(_var) \
(((_var) & HTT_CMEM_BASE_SEND_NUM_ENTRIES_M) >> \
HTT_CMEM_BASE_SEND_NUM_ENTRIES_S)
#define HTT_CMEM_BASE_SEND_NUM_ENTRIES_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CMEM_BASE_SEND_NUM_ENTRIES, _val); \
((_var) |= ((_val) << HTT_SRING_SETUP_DONE_PDEV_ID_S)); \
} while (0)
/**
* @brief - HTT PPDU ID format
*
* @details
* The following field definitions describe the format of the PPDU ID.
* The PPDU ID is truncated to 24 bits for TLVs from TQM.
*
* |31 30|29 24| 23|22 21|20 19|18 17|16 12|11 0|
* +--------------------------------------------------------------------------
* |rsvd |seq_cmd_type|tqm_cmd|rsvd |seq_idx|mac_id| hwq_ id | sch id |
* +--------------------------------------------------------------------------
*
* sch id :Schedule command id
* Bits [11 : 0] : monotonically increasing counter to track the
* PPDU posted to a specific transmit queue.
*
* hwq_id: Hardware Queue ID.
* Bits [16 : 12] : Indicates the queue id in the hardware transmit queue.
*
* mac_id: MAC ID
* Bits [18 : 17] : LMAC ID obtained from the whal_mac_struct
*
* seq_idx: Sequence index.
* Bits [21 : 19] : Sequence index indicates all the PPDU belonging to
* a particular TXOP.
*
* tqm_cmd: HWSCH/TQM flag.
* Bit [23] : Always set to 0.
*
* seq_cmd_type: Sequence command type.
* Bit [29 : 24] : Indicates the frame type for the current sequence.
* Refer to enum HTT_STATS_FTYPE for values.
*/
PREPACK struct htt_ppdu_id {
A_UINT32
sch_id: 12,
hwq_id: 5,
mac_id: 2,
seq_idx: 2,
reserved1: 2,
tqm_cmd: 1,
seq_cmd_type: 6,
reserved2: 2;
} POSTPACK;
#define HTT_PPDU_ID_SCH_ID_S 0
#define HTT_PPDU_ID_SCH_ID_M 0x00000fff
#define HTT_PPDU_ID_SCH_ID_GET(_var) \
(((_var) & HTT_PPDU_ID_SCH_ID_M) >> HTT_PPDU_ID_SCH_ID_S)
#define HTT_PPDU_ID_SCH_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPDU_ID_SCH_ID, _val); \
((_var) |= ((_val) << HTT_PPDU_ID_SCH_ID_S)); \
} while (0)
#define HTT_PPDU_ID_HWQ_ID_S 12
#define HTT_PPDU_ID_HWQ_ID_M 0x0001f000
#define HTT_PPDU_ID_HWQ_ID_GET(_var) \
(((_var) & HTT_PPDU_ID_HWQ_ID_M) >> HTT_PPDU_ID_HWQ_ID_S)
#define HTT_PPDU_ID_HWQ_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPDU_ID_HWQ_ID, _val); \
((_var) |= ((_val) << HTT_PPDU_ID_HWQ_ID_S)); \
} while (0)
#define HTT_PPDU_ID_MAC_ID_S 17
#define HTT_PPDU_ID_MAC_ID_M 0x00060000
#define HTT_PPDU_ID_MAC_ID_GET(_var) \
(((_var) & HTT_PPDU_ID_MAC_ID_M) >> HTT_PPDU_ID_MAC_ID_S)
#define HTT_PPDU_ID_MAC_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPDU_ID_MAC_ID, _val); \
((_var) |= ((_val) << HTT_PPDU_ID_MAC_ID_S)); \
} while (0)
#define HTT_PPDU_ID_SEQ_IDX_S 19
#define HTT_PPDU_ID_SEQ_IDX_M 0x00180000
#define HTT_PPDU_ID_SEQ_IDX_GET(_var) \
(((_var) & HTT_PPDU_ID_SEQ_IDX_M) >> HTT_PPDU_ID_SEQ_IDX_S)
#define HTT_PPDU_ID_SEQ_IDX_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPDU_ID_SEQ_IDX, _val); \
((_var) |= ((_val) << HTT_PPDU_ID_SEQ_IDX_S)); \
} while (0)
#define HTT_PPDU_ID_TQM_CMD_S 23
#define HTT_PPDU_ID_TQM_CMD_M 0x00800000
#define HTT_PPDU_ID_TQM_CMD_GET(_var) \
(((_var) & HTT_PPDU_ID_TQM_CMD_M) >> HTT_PPDU_ID_TQM_CMD_S)
#define HTT_PPDU_ID_TQM_CMD_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPDU_ID_TQM_CMD, _val); \
((_var) |= ((_val) << HTT_PPDU_ID_TQM_CMD_S)); \
} while (0)
#define HTT_PPDU_ID_SEQ_CMD_TYPE_S 24
#define HTT_PPDU_ID_SEQ_CMD_TYPE_M 0x3f000000
#define HTT_PPDU_ID_SEQ_CMD_TYPE_GET(_var) \
(((_var) & HTT_PPDU_ID_SEQ_CMD_TYPE_M) >> HTT_PPDU_ID_SEQ_CMD_TYPE_S)
#define HTT_PPDU_ID_SEQ_CMD_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_PPDU_ID_SEQ_CMD_TYPE, _val); \
((_var) |= ((_val) << HTT_PPDU_ID_SEQ_CMD_TYPE_S)); \
} while (0)
/**
* @brief target -> RX PEER METADATA V0 format
* Host will know the peer metadata version from the wmi_service_ready_ext2
* message from target, and will confirm to the target which peer metadata
* version to use in the wmi_init message.
*
* The following diagram shows the format of the RX PEER METADATA.
*
* |31 24|23 16|15 8|7 0|
* |-----------------------------------------------------------------------|
* | Reserved | VDEV ID | PEER ID |
* |-----------------------------------------------------------------------|
*/
PREPACK struct htt_rx_peer_metadata_v0 {
A_UINT32
peer_id: 16,
vdev_id: 8,
reserved1: 8;
} POSTPACK;
#define HTT_RX_PEER_META_DATA_V0_PEER_ID_S 0
#define HTT_RX_PEER_META_DATA_V0_PEER_ID_M 0x0000ffff
#define HTT_RX_PEER_META_DATA_V0_PEER_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V0_PEER_ID_M) >> HTT_RX_PEER_META_DATA_V0_PEER_ID_S)
#define HTT_RX_PEER_META_DATA_V0_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V0_PEER_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V0_PEER_ID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V0_VDEV_ID_S 16
#define HTT_RX_PEER_META_DATA_V0_VDEV_ID_M 0x00ff0000
#define HTT_RX_PEER_META_DATA_V0_VDEV_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V0_VDEV_ID_M) >> HTT_RX_PEER_META_DATA_V0_VDEV_ID_S)
#define HTT_RX_PEER_META_DATA_V0_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V0_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V0_VDEV_ID_S)); \
} while (0)
/**
* @brief target -> RX PEER METADATA V1 format
* Host will know the peer metadata version from the wmi_service_ready_ext2
* message from target, and will confirm to the target which peer metadata
* version to use in the wmi_init message.
*
* The following diagram shows the format of the RX PEER METADATA V1 format.
*
* |31 29|28 26|25 24|23 16|15 14| 13 |12 0|
* |---------------------------------------------------------------------------|
* |Rsvd2|CHIP ID|LMAC ID|VDEV ID|logical_link_id|ML PEER|SW PEER ID/ML PEER ID|
* |---------------------------------------------------------------------------|
*/
PREPACK struct htt_rx_peer_metadata_v1 {
A_UINT32
peer_id: 13,
ml_peer_valid: 1,
logical_link_id: 2,
vdev_id: 8,
lmac_id: 2,
chip_id: 3,
reserved2: 3;
} POSTPACK;
#define HTT_RX_PEER_META_DATA_V1_PEER_ID_S 0
#define HTT_RX_PEER_META_DATA_V1_PEER_ID_M 0x00001fff
#define HTT_RX_PEER_META_DATA_V1_PEER_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1_PEER_ID_M) >> HTT_RX_PEER_META_DATA_V1_PEER_ID_S)
#define HTT_RX_PEER_META_DATA_V1_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1_PEER_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1_PEER_ID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1_ML_PEER_VALID_S 13
#define HTT_RX_PEER_META_DATA_V1_ML_PEER_VALID_M 0x00002000
#define HTT_RX_PEER_META_DATA_V1_ML_PEER_VALID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1_ML_PEER_VALID_M) >> HTT_RX_PEER_META_DATA_V1_ML_PEER_VALID_S)
#define HTT_RX_PEER_META_DATA_V1_ML_PEER_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1_ML_PEER_VALID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1_ML_PEER_VALID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1_VDEV_ID_S 16
#define HTT_RX_PEER_META_DATA_V1_VDEV_ID_M 0x00ff0000
#define HTT_RX_PEER_META_DATA_V1_VDEV_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1_VDEV_ID_M) >> HTT_RX_PEER_META_DATA_V1_VDEV_ID_S)
#define HTT_RX_PEER_META_DATA_V1_LOGICAL_LINK_ID_S 14
#define HTT_RX_PEER_META_DATA_V1_LOGICAL_LINK_ID_M 0x0000c000
#define HTT_RX_PEER_META_DATA_V1_LOGICAL_LINK_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1_LOGICAL_LINK_ID_M) >> HTT_RX_PEER_META_DATA_V1_LOGICAL_LINK_ID_S)
#define HTT_RX_PEER_META_DATA_V1_LOGICAL_LINK_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1_LOGICAL_LINK_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1_LOGICAL_LINK_ID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1_VDEV_ID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1_LMAC_ID_S 24
#define HTT_RX_PEER_META_DATA_V1_LMAC_ID_M 0x03000000
#define HTT_RX_PEER_META_DATA_V1_LMAC_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1_LMAC_ID_M) >> HTT_RX_PEER_META_DATA_V1_LMAC_ID_S)
#define HTT_RX_PEER_META_DATA_V1_LMAC_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1_LMAC_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1_LMAC_ID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1_CHIP_ID_S 26
#define HTT_RX_PEER_META_DATA_V1_CHIP_ID_M 0x1c000000
#define HTT_RX_PEER_META_DATA_V1_CHIP_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1_CHIP_ID_M) >> HTT_RX_PEER_META_DATA_V1_CHIP_ID_S)
#define HTT_RX_PEER_META_DATA_V1_CHIP_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1_CHIP_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1_CHIP_ID_S)); \
} while (0)
/**
* @brief target -> RX PEER METADATA V1A format
* Host will know the peer metadata version from the wmi_service_ready_ext2
* message from target, WMI_SERVICE_PEER_METADATA_V1A_V1B_SUPPORT WMI service,
* and will confirm to the target which peer metadata version to use in the
* wmi_init message.
*
* The following diagram shows the format of the RX PEER METADATA V1A format.
*
* |31 29|28 26|25 22|21 14| 13 |12 0|
* |-------------------------------------------------------------------|
* |Rsvd2|CHIP ID|logical_link_id|VDEV ID|ML PEER|SW PEER ID/ML PEER ID|
* |-------------------------------------------------------------------|
*/
PREPACK struct htt_rx_peer_metadata_v1a {
A_UINT32
peer_id: 13,
ml_peer_valid: 1,
vdev_id: 8,
logical_link_id: 4,
chip_id: 3,
qdata_refill: 1,
reserved2: 2;
} POSTPACK;
#define HTT_RX_PEER_META_DATA_V1A_PEER_ID_S 0
#define HTT_RX_PEER_META_DATA_V1A_PEER_ID_M 0x00001fff
#define HTT_RX_PEER_META_DATA_V1A_PEER_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1A_PEER_ID_M) >> HTT_RX_PEER_META_DATA_V1A_PEER_ID_S)
#define HTT_RX_PEER_META_DATA_V1A_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1A_PEER_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1A_PEER_ID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1A_ML_PEER_VALID_S 13
#define HTT_RX_PEER_META_DATA_V1A_ML_PEER_VALID_M 0x00002000
#define HTT_RX_PEER_META_DATA_V1A_ML_PEER_VALID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1A_ML_PEER_VALID_M) >> HTT_RX_PEER_META_DATA_V1A_ML_PEER_VALID_S)
#define HTT_RX_PEER_META_DATA_V1A_ML_PEER_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1A_ML_PEER_VALID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1A_ML_PEER_VALID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1A_VDEV_ID_S 14
#define HTT_RX_PEER_META_DATA_V1A_VDEV_ID_M 0x003fc000
#define HTT_RX_PEER_META_DATA_V1A_VDEV_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1A_VDEV_ID_M) >> HTT_RX_PEER_META_DATA_V1A_VDEV_ID_S)
#define HTT_RX_PEER_META_DATA_V1A_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1A_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1A_VDEV_ID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1A_LOGICAL_LINK_ID_S 22
#define HTT_RX_PEER_META_DATA_V1A_LOGICAL_LINK_ID_M 0x03C00000
#define HTT_RX_PEER_META_DATA_V1A_LOGICAL_LINK_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1A_LOGICAL_LINK_ID_M) >> HTT_RX_PEER_META_DATA_V1A_LOGICAL_LINK_ID_S)
#define HTT_RX_PEER_META_DATA_V1A_LOGICAL_LINK_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1A_LOGICAL_LINK_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1A_LOGICAL_LINK_ID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1A_CHIP_ID_S 26
#define HTT_RX_PEER_META_DATA_V1A_CHIP_ID_M 0x1c000000
#define HTT_RX_PEER_META_DATA_V1A_CHIP_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1A_CHIP_ID_M) >> HTT_RX_PEER_META_DATA_V1A_CHIP_ID_S)
#define HTT_RX_PEER_META_DATA_V1A_CHIP_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1A_CHIP_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1A_CHIP_ID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1A_QDATA_REFILL_S 29
#define HTT_RX_PEER_META_DATA_V1A_QDATA_REFILL_M 0x20000000
#define HTT_RX_PEER_META_DATA_V1A_QDATA_REFILL_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1A_QDATA_REFILL_M) >> HTT_RX_PEER_META_DATA_V1A_QDATA_REFILL_S)
#define HTT_RX_PEER_META_DATA_V1A_QDATA_REFILL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1A_QDATA_REFILL, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1A_QDATA_REFILL_S)); \
} while (0)
/**
* @brief target -> RX PEER METADATA V1B format
* Host will know the peer metadata version from the wmi_service_ready_ext2
* message from target, WMI_SERVICE_PEER_METADATA_V1A_V1B_SUPPORT WMI service,
* and will confirm to the target which peer metadata version to use in the
* wmi_init message.
*
* The following diagram shows the format of the RX PEER METADATA V1B format.
*
* |31 29|28 26|25 22|21 14| 13 |12 0|
* |--------------------------------------------------------------|
* |Rsvd2|CHIP ID|hw_link_id|VDEV ID|ML PEER|SW PEER ID/ML PEER ID|
* |--------------------------------------------------------------|
*/
PREPACK struct htt_rx_peer_metadata_v1b {
A_UINT32
peer_id: 13,
ml_peer_valid: 1,
vdev_id: 8,
hw_link_id: 4,
chip_id: 3,
reserved2: 3;
} POSTPACK;
#define HTT_RX_PEER_META_DATA_V1B_PEER_ID_S 0
#define HTT_RX_PEER_META_DATA_V1B_PEER_ID_M 0x00001fff
#define HTT_RX_PEER_META_DATA_V1B_PEER_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1B_PEER_ID_M) >> HTT_RX_PEER_META_DATA_V1B_PEER_ID_S)
#define HTT_RX_PEER_META_DATA_V1B_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1B_PEER_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1B_PEER_ID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1B_ML_PEER_VALID_S 13
#define HTT_RX_PEER_META_DATA_V1B_ML_PEER_VALID_M 0x00002000
#define HTT_RX_PEER_META_DATA_V1B_ML_PEER_VALID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1B_ML_PEER_VALID_M) >> HTT_RX_PEER_META_DATA_V1B_ML_PEER_VALID_S)
#define HTT_RX_PEER_META_DATA_V1B_ML_PEER_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1B_ML_PEER_VALID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1B_ML_PEER_VALID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1B_VDEV_ID_S 14
#define HTT_RX_PEER_META_DATA_V1B_VDEV_ID_M 0x003fc000
#define HTT_RX_PEER_META_DATA_V1B_VDEV_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1B_VDEV_ID_M) >> HTT_RX_PEER_META_DATA_V1B_VDEV_ID_S)
#define HTT_RX_PEER_META_DATA_V1B_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1B_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1B_VDEV_ID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1B_HW_LINK_ID_S 22
#define HTT_RX_PEER_META_DATA_V1B_HW_LINK_ID_M 0x03C00000
#define HTT_RX_PEER_META_DATA_V1B_HW_LINK_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1B_HW_LINK_ID_M) >> HTT_RX_PEER_META_DATA_V1B_HW_LINK_ID_S)
#define HTT_RX_PEER_META_DATA_V1B_HW_LINK_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1B_HW_LINK_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1B_HW_LINK_ID_S)); \
} while (0)
#define HTT_RX_PEER_META_DATA_V1B_CHIP_ID_S 26
#define HTT_RX_PEER_META_DATA_V1B_CHIP_ID_M 0x1c000000
#define HTT_RX_PEER_META_DATA_V1B_CHIP_ID_GET(_var) \
(((_var) & HTT_RX_PEER_META_DATA_V1B_CHIP_ID_M) >> HTT_RX_PEER_META_DATA_V1B_CHIP_ID_S)
#define HTT_RX_PEER_META_DATA_V1B_CHIP_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_PEER_META_DATA_V1B_CHIP_ID, _val); \
((_var) |= ((_val) << HTT_RX_PEER_META_DATA_V1B_CHIP_ID_S)); \
} while (0)
/* generic variables for masks and shifts for various fields */
extern A_UINT32 HTT_RX_PEER_META_DATA_PEER_ID_S;
extern A_UINT32 HTT_RX_PEER_META_DATA_PEER_ID_M;
extern A_UINT32 HTT_RX_PEER_META_DATA_ML_PEER_VALID_S;
extern A_UINT32 HTT_RX_PEER_META_DATA_ML_PEER_VALID_M;
/* generic function pointers to get/set values from rx peer metadata v0/v1/v1a/v1b */
extern A_UINT32 (*HTT_RX_PEER_META_DATA_PEER_ID_GET) (A_UINT32 var);
extern void (*HTT_RX_PEER_META_DATA_PEER_ID_SET) (A_UINT32 *var, A_UINT32 val);
extern A_UINT32 (*HTT_RX_PEER_META_DATA_VDEV_ID_GET) (A_UINT32 var);
extern void (*HTT_RX_PEER_META_DATA_VDEV_ID_SET) (A_UINT32 *var, A_UINT32 val);
extern A_UINT32 (*HTT_RX_PEER_META_DATA_ML_PEER_VALID_GET) (A_UINT32 var);
extern void (*HTT_RX_PEER_META_DATA_ML_PEER_VALID_SET) (A_UINT32 *var, A_UINT32 val);
extern A_UINT32 (*HTT_RX_PEER_META_DATA_LOGICAL_LINK_ID_GET) (A_UINT32 var);
extern void (*HTT_RX_PEER_META_DATA_LOGICAL_LINK_ID_SET) (A_UINT32 *var, A_UINT32 val);
extern A_UINT32 (*HTT_RX_PEER_META_DATA_LMAC_ID_GET) (A_UINT32 var);
extern void (*HTT_RX_PEER_META_DATA_LMAC_ID_SET) (A_UINT32 *var, A_UINT32 val);
extern A_UINT32 (*HTT_RX_PEER_META_DATA_CHIP_ID_GET) (A_UINT32 var);
extern void (*HTT_RX_PEER_META_DATA_CHIP_ID_SET) (A_UINT32 *var, A_UINT32 val);
extern A_UINT32 (*HTT_RX_PEER_META_DATA_HW_LINK_ID_GET) (A_UINT32 var);
extern void (*HTT_RX_PEER_META_DATA_HW_LINK_ID_SET) (A_UINT32 *var, A_UINT32 val);
extern A_UINT32 (*HTT_RX_PEER_META_DATA_QDATA_REFILL_GET) (A_UINT32 var);
extern void (*HTT_RX_PEER_META_DATA_QDATA_REFILL_SET) (A_UINT32 *var, A_UINT32 val);
/*
* In some systems, the host SW wants to specify priorities between
* different MSDU / flow queues within the same peer-TID.
* The below enums are used for the host to identify to the target
* which MSDU queue's priority it wants to adjust.
*/
/*
* The MSDUQ index describe index of TCL HW, where each index is
* used for queuing particular types of MSDUs.
* The different MSDU queue types are defined in HTT_MSDU_QTYPE.
*/
enum HTT_MSDUQ_INDEX {
HTT_MSDUQ_INDEX_NON_UDP, /* NON UDP MSDUQ index */
HTT_MSDUQ_INDEX_UDP, /* UDP MSDUQ index */
HTT_MSDUQ_INDEX_CUSTOM_PRIO_0, /* Latency priority 0 index */
HTT_MSDUQ_INDEX_CUSTOM_PRIO_1, /* Latency priority 1 index */
HTT_MSDUQ_INDEX_CUSTOM_EXT_PRIO_0, /* High num TID cases/ MLO dedicate link cases */
HTT_MSDUQ_INDEX_CUSTOM_EXT_PRIO_1, /* High num TID cases/ MLO dedicate link cases */
HTT_MSDUQ_INDEX_CUSTOM_EXT_PRIO_2, /* High num TID cases/ MLO dedicate link cases */
HTT_MSDUQ_INDEX_CUSTOM_EXT_PRIO_3, /* High num TID cases/ MLO dedicate link cases */
HTT_MSDUQ_MAX_INDEX,
};
/* MSDU qtype definition */
enum HTT_MSDU_QTYPE {
/*
* The LATENCY_CRIT_0 and LATENCY_CRIT_1 queue types don't have a fixed
* relative priority. Instead, the relative priority of CRIT_0 versus
* CRIT_1 is controlled by the FW, through the configuration parameters
* it applies to the queues.
*/
HTT_MSDU_QTYPE_LATENCY_CRIT_0, /* Specified MSDUQ index used for latency critical 0 */
HTT_MSDU_QTYPE_LATENCY_CRIT_1, /* Specified MSDUQ index used for latency critical 1 */
HTT_MSDU_QTYPE_UDP, /* Specifies MSDUQ index used for UDP flow */
HTT_MSDU_QTYPE_NON_UDP, /* Specifies MSDUQ index used for non-udp flow */
HTT_MSDU_QTYPE_HOL, /* Specified MSDUQ index used for Head of Line */
HTT_MSDU_QTYPE_USER_SPECIFIED, /* Specifies MSDUQ index used for advertising changeable flow type */
HTT_MSDU_QTYPE_HI_PRIO, /* Specifies MSDUQ index used for high priority flow type */
HTT_MSDU_QTYPE_LO_PRIO, /* Specifies MSDUQ index used for low priority flow type */
/* New MSDU_QTYPE should be added above this line */
/*
* Below QTYPE_MAX will increase if additional QTYPEs are defined
* in the future. Hence HTT_MSDU_QTYPE_MAX can't be used in
* any host/target message definitions. The QTYPE_MAX value can
* only be used internally within the host or within the target.
* If host or target find a qtype value is >= HTT_MSDU_QTYPE_MAX
* it must regard the unexpected value as a default qtype value,
* or ignore it.
*/
HTT_MSDU_QTYPE_MAX,
HTT_MSDU_QTYPE_NOT_IN_USE = 255, /* corresponding MSDU index is not in use */
};
enum HTT_MSDUQ_LEGACY_FLOW_INDEX {
HTT_MSDUQ_LEGACY_HI_PRI_FLOW_INDEX = 0,
HTT_MSDUQ_LEGACY_LO_PRI_FLOW_INDEX = 1,
HTT_MSDUQ_LEGACY_UDP_FLOW_INDEX = 2,
HTT_MSDUQ_LEGACY_NON_UDP_FLOW_INDEX = 3,
};
/**
* @brief target -> host mlo timestamp offset indication
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_MLO_TIMESTAMP_OFFSET_IND
*
* @details
* The following field definitions describe the format of the HTT target
* to host mlo timestamp offset indication message.
*
*
* |31 16|15 12|11 10|9 8|7 0 |
* |----------------------------------------------------------------------|
* | mac_clk_freq_mhz | rsvd |chip_id|pdev_id| msg type |
* |----------------------------------------------------------------------|
* | Sync time stamp lo in us |
* |----------------------------------------------------------------------|
* | Sync time stamp hi in us |
* |----------------------------------------------------------------------|
* | mlo time stamp offset lo in us |
* |----------------------------------------------------------------------|
* | mlo time stamp offset hi in us |
* |----------------------------------------------------------------------|
* | mlo time stamp offset clocks in clock ticks |
* |----------------------------------------------------------------------|
* |31 26|25 16|15 0 |
* |rsvd2 | mlo time stamp | mlo time stamp compensation in us |
* | | compensation in clks | |
* |----------------------------------------------------------------------|
* |31 22|21 0 |
* | rsvd 3 | mlo time stamp comp timer period |
* |----------------------------------------------------------------------|
* The message is interpreted as follows:
*
* dword0 - b'0:7 - msg_type: This will be set to
* HTT_T2H_MSG_TYPE_MLO_TIMESTAMP_OFFSET_IND
* value: 0x28
*
* dword0 - b'9:8 - pdev_id
*
* dword0 - b'11:10 - chip_id
*
* dword0 - b'15:12 - rsvd1: Reserved for future use
*
* dword0 - b'31:16 - mac clock frequency of the mac HW block in MHz
*
* dword1 - b'31:0 - lower 32 bits of the WLAN global time stamp (in us) at
* which last sync interrupt was received
*
* dword2 - b'31:0 - upper 32 bits of the WLAN global time stamp (in us) at
* which last sync interrupt was received
*
* dword3 - b'31:0 - lower 32 bits of the MLO time stamp offset in us
*
* dword4 - b'31:0 - upper 32 bits of the MLO time stamp offset in us
*
* dword5 - b'31:0 - MLO time stamp offset in clock ticks for sub us
*
* dword6 - b'15:0 - MLO time stamp compensation applied in us
*
* dword6 - b'25:16 - MLO time stamp compensation applied in clock ticks
* for sub us resolution
*
* dword6 - b'31:26 - rsvd2: Reserved for future use
*
* dword7 - b'21:0 - period of MLO compensation timer at which compensation
* is applied, in us
*
* dword7 - b'31:22 - rsvd3: Reserved for future use
*/
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MSG_TYPE_M 0x000000FF
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MSG_TYPE_S 0
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_PDEV_ID_M 0x00000300
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_PDEV_ID_S 8
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_CHIP_ID_M 0x00000C00
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_CHIP_ID_S 10
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MAC_CLK_FREQ_MHZ_M 0xFFFF0000
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MAC_CLK_FREQ_MHZ_S 16
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_US_M 0x0000FFFF
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_US_S 0
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_CLKS_M 0x03FF0000
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_CLKS_S 16
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_PERIOD_US_M 0x003FFFFF
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_PERIOD_US_S 0
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MSG_TYPE_GET(_var) \
(((_var) & HTT_T2H_MLO_TIMESTAMP_OFFSET_MSG_TYPE_M) >> HTT_T2H_MLO_TIMESTAMP_OFFSET_MSG_TYPE_S)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MSG_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MLO_TIMESTAMP_OFFSET_MSG_TYPE, _val); \
((_var) |= ((_val) << HTT_T2H_MLO_TIMESTAMP_OFFSET_MSG_TYPE_S)); \
} while (0)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_PDEV_ID_GET(_var) \
(((_var) & HTT_T2H_MLO_TIMESTAMP_OFFSET_PDEV_ID_M) >> HTT_T2H_MLO_TIMESTAMP_OFFSET_PDEV_ID_S)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MLO_TIMESTAMP_OFFSET_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_T2H_MLO_TIMESTAMP_OFFSET_PDEV_ID_S)); \
} while (0)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_CHIP_ID_GET(_var) \
(((_var) & HTT_T2H_MLO_TIMESTAMP_OFFSET_CHIP_ID_M) >> HTT_T2H_MLO_TIMESTAMP_OFFSET_CHIP_ID_S)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_CHIP_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MLO_TIMESTAMP_OFFSET_CHIP_ID, _val); \
((_var) |= ((_val) << HTT_T2H_MLO_TIMESTAMP_OFFSET_CHIP_ID_S)); \
} while (0)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MAC_CLK_FREQ_MHZ_GET(_var) \
(((_var) & HTT_T2H_MLO_TIMESTAMP_OFFSET_MAC_CLK_FREQ_MHZ_M) >> \
HTT_T2H_MLO_TIMESTAMP_OFFSET_MAC_CLK_FREQ_MHZ_S)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MAC_CLK_FREQ_MHZ_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MLO_TIMESTAMP_OFFSET_MAC_CLK_FREQ_MHZ, _val); \
((_var) |= ((_val) << HTT_T2H_MLO_TIMESTAMP_OFFSET_MAC_CLK_FREQ_MHZ_S)); \
} while (0)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_US_GET(_var) \
(((_var) & HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_US_M) >> \
HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_US_S)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_US_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_US, _val); \
((_var) |= ((_val) << HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_US_S)); \
} while (0)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_CLKS_GET(_var) \
(((_var) & HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_CLKS_M) >> \
HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_CLKS_S)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_CLKS_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_CLKS, _val); \
((_var) |= ((_val) << HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_CLKS_S)); \
} while (0)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_PERIOD_US_GET(_var) \
(((_var) & HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_PERIOD_US_M) >> \
HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_PERIOD_US_S)
#define HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_PERIOD_US_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_PERIOD_US, _val); \
((_var) |= ((_val) << HTT_T2H_MLO_TIMESTAMP_OFFSET_MLO_TIMESTAMP_COMP_PERIOD_US_S)); \
} while (0)
typedef struct {
A_UINT32 msg_type: 8, /* bits 7:0 */
pdev_id: 2, /* bits 9:8 */
chip_id: 2, /* bits 11:10 */
reserved1: 4, /* bits 15:12 */
mac_clk_freq_mhz: 16; /* bits 31:16 */
A_UINT32 sync_timestamp_lo_us;
A_UINT32 sync_timestamp_hi_us;
A_UINT32 mlo_timestamp_offset_lo_us;
A_UINT32 mlo_timestamp_offset_hi_us;
A_UINT32 mlo_timestamp_offset_clks;
A_UINT32 mlo_timestamp_comp_us: 16, /* bits 15:0 */
mlo_timestamp_comp_clks: 10, /* bits 25:16 */
reserved2: 6; /* bits 31:26 */
A_UINT32 mlo_timestamp_comp_timer_period_us: 22, /* bits 21:0 */
reserved3: 10; /* bits 31:22 */
} htt_t2h_mlo_offset_ind_t;
/*
* @brief target -> host VDEV TX RX STATS
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_VDEVS_TXRX_STATS_PERIODIC_IND
*
* @details
* HTT_T2H_MSG_TYPE_VDEVS_TXRX_STATS_PERIODIC_IND message is sent by the target
* every periodic interval programmed in HTT_H2T_MSG_TYPE_VDEVS_TXRX_STATS_CFG.
* After the host sends an initial HTT_H2T_MSG_TYPE_VDEVS_TXRX_STATS_CFG,
* this HTT_T2H_MSG_TYPE_VDEVS_TXRX_STATS_PERIODIC_IND message will be sent
* periodically by target even in the absence of any further HTT request
* messages from host.
*
* The message is formatted as follows:
*
* |31 16|15 8|7 0|
* |---------------------------------+----------------+----------------|
* | payload_size | pdev_id | msg_type |
* |---------------------------------+----------------+----------------|
* | reserved0 |
* |-------------------------------------------------------------------|
* | reserved1 |
* |-------------------------------------------------------------------|
* | reserved2 |
* |-------------------------------------------------------------------|
* | |
* | VDEV specific Tx Rx stats info |
* | |
* |-------------------------------------------------------------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to 0x2c
* (HTT_T2H_MSG_TYPE_VDEVS_TXRX_STATS_PERIODIC_IND)
* b'8:15 - pdev_id
* b'16:31 - size in bytes of the payload that follows the 16-byte
* message header fields (msg_type through reserved2)
* dword1 - b'0:31 - reserved0.
* dword2 - b'0:31 - reserved1.
* dword3 - b'0:31 - reserved2.
*/
typedef struct {
A_UINT32 msg_type: 8,
pdev_id: 8,
payload_size: 16;
A_UINT32 reserved0;
A_UINT32 reserved1;
A_UINT32 reserved2;
} htt_t2h_vdevs_txrx_stats_periodic_hdr_t;
#define HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_HDR_SIZE 16
#define HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PDEV_ID_M 0x0000FF00
#define HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PDEV_ID_S 8
#define HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PDEV_ID_GET(_var) \
(((_var) & HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PDEV_ID_M) >> HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PDEV_ID_S)
#define HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PDEV_ID_S)); \
} while (0)
#define HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PAYLOAD_SIZE_M 0xFFFF0000
#define HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PAYLOAD_SIZE_S 16
#define HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PAYLOAD_SIZE_GET(_var) \
(((_var) & HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PAYLOAD_SIZE_M) >> HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PAYLOAD_SIZE_S)
#define HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PAYLOAD_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PAYLOAD_SIZE, _val); \
((_var) |= ((_val) << HTT_T2H_VDEVS_TXRX_STATS_PERIODIC_IND_PAYLOAD_SIZE_S)); \
} while (0)
/* SOC related stats */
typedef struct {
htt_tlv_hdr_t tlv_hdr;
/* When TQM is not able to find the peers during Tx, then it drops the packets
* This can be due to either the peer is deleted or deletion is ongoing
* */
A_UINT32 inv_peers_msdu_drop_count_lo;
A_UINT32 inv_peers_msdu_drop_count_hi;
} htt_stats_soc_txrx_stats_common_tlv;
/* preserve old name alias for new name consistent with the tag name */
typedef htt_stats_soc_txrx_stats_common_tlv htt_t2h_soc_txrx_stats_common_tlv;
/* VDEV HW Tx/Rx stats */
typedef struct {
htt_tlv_hdr_t tlv_hdr;
A_UINT32 vdev_id;
/* Rx msdu byte cnt */
A_UINT32 rx_msdu_byte_cnt_lo;
A_UINT32 rx_msdu_byte_cnt_hi;
/* Rx msdu cnt */
A_UINT32 rx_msdu_cnt_lo;
A_UINT32 rx_msdu_cnt_hi;
/* tx msdu byte cnt */
A_UINT32 tx_msdu_byte_cnt_lo;
A_UINT32 tx_msdu_byte_cnt_hi;
/* tx msdu cnt */
A_UINT32 tx_msdu_cnt_lo;
A_UINT32 tx_msdu_cnt_hi;
/* tx excessive retry discarded msdu cnt */
A_UINT32 tx_msdu_excessive_retry_discard_cnt_lo;
A_UINT32 tx_msdu_excessive_retry_discard_cnt_hi;
/* TX congestion ctrl msdu drop cnt */
A_UINT32 tx_msdu_cong_ctrl_drop_cnt_lo;
A_UINT32 tx_msdu_cong_ctrl_drop_cnt_hi;
/* discarded tx msdus cnt coz of time to live expiry */
A_UINT32 tx_msdu_ttl_expire_drop_cnt_lo;
A_UINT32 tx_msdu_ttl_expire_drop_cnt_hi;
/* tx excessive retry discarded msdu byte cnt */
A_UINT32 tx_msdu_excessive_retry_discard_byte_cnt_lo;
A_UINT32 tx_msdu_excessive_retry_discard_byte_cnt_hi;
/* TX congestion ctrl msdu drop byte cnt */
A_UINT32 tx_msdu_cong_ctrl_drop_byte_cnt_lo;
A_UINT32 tx_msdu_cong_ctrl_drop_byte_cnt_hi;
/* discarded tx msdus byte cnt coz of time to live expiry */
A_UINT32 tx_msdu_ttl_expire_drop_byte_cnt_lo;
A_UINT32 tx_msdu_ttl_expire_drop_byte_cnt_hi;
/* TQM bypass frame cnt */
A_UINT32 tqm_bypass_frame_cnt_lo;
A_UINT32 tqm_bypass_frame_cnt_hi;
/* TQM bypass byte cnt */
A_UINT32 tqm_bypass_byte_cnt_lo;
A_UINT32 tqm_bypass_byte_cnt_hi;
} htt_stats_vdev_txrx_stats_hw_stats_tlv;
/* preserve old name alias for new name consistent with the tag name */
typedef htt_stats_vdev_txrx_stats_hw_stats_tlv
htt_t2h_vdev_txrx_stats_hw_stats_tlv;
/*
* MSG_TYPE => HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF
*
* @details
* The SAWF_DEF_QUEUES_MAP_REPORT_CONF message is sent by the target in
* response to a SAWF_DEF_QUEUES_MAP_REPORT_REQ from the host.
* The SAWF_DEF_QUEUES_MAP_REPORT_CONF will show which service class
* the default MSDU queues of each of the specified TIDs for the peer
* specified in the SAWF_DEF_QUEUES_MAP_REPORT_REQ message are linked to.
* If the default MSDU queues of a given TID within the peer are not linked
* to a service class, the svc_class_id field for that TID will have a
* 0xff HTT_SAWF_SVC_CLASS_INVALID_ID value to indicate the default MSDU
* queues for that TID are not mapped to any service class.
*
* |31 16|15 8|7 0|
* |------------------------------+--------------+--------------|
* | peer ID | reserved | msg type |
* |------------------------------+--------------+------+-------|
* | reserved | svc class ID | TID |
* |------------------------------------------------------------|
* ...
* |------------------------------------------------------------|
* | reserved | svc class ID | TID |
* |------------------------------------------------------------|
* Header fields:
* dword0 - b'7:0 - msg_type: This will be set to
* 0x2d (HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF)
* b'31:16 - peer ID
* dword1 - b'7:0 - TID
* b'15:8 - svc class ID
* (dword2, etc. same format as dword1)
*/
#define HTT_SAWF_SVC_CLASS_INVALID_ID 0xff
PREPACK struct htt_t2h_sawf_def_queues_map_report_conf {
A_UINT32 msg_type :8,
reserved0 :8,
peer_id :16;
struct {
A_UINT32 tid :8,
svc_class_id :8,
reserved1 :16;
} tid_reports[1/*or more*/];
} POSTPACK;
#define HTT_SAWF_DEF_QUEUES_MAP_REPORT_CONF_HDR_BYTES 4 /* msg_type, peer_id */
#define HTT_SAWF_DEF_QUEUES_MAP_REPORT_CONF_ELEM_BYTES 4 /* TID, svc_class_id */
#define HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_PEER_ID_M 0xFFFF0000
#define HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_PEER_ID_S 16
#define HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_PEER_ID_GET(_var) \
(((_var) & HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_PEER_ID_M) >> \
HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_PEER_ID_S)
#define HTT_RX_SAWF_DEF_QUEUES_MAP_REPORT_CONF_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_PEER_ID, _val); \
((_var) |= ((_val) << HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_PEER_ID_S)); \
} while (0)
#define HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_TID_M 0x000000FF
#define HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_TID_S 0
#define HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_TID_GET(_var) \
(((_var) & HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_TID_M) >> \
HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_TID_S)
#define HTT_RX_SAWF_DEF_QUEUES_MAP_REPORT_CONF_TID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_TID, _val); \
((_var) |= ((_val) << HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_TID_S)); \
} while (0)
#define HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_SVC_CLASS_ID_M 0x0000FF00
#define HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_SVC_CLASS_ID_S 8
#define HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_SVC_CLASS_ID_GET(_var) \
(((_var) & HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_SVC_CLASS_ID_M) >> \
HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_SVC_CLASS_ID_S)
#define HTT_RX_SAWF_DEF_QUEUES_MAP_REPORT_CONF_SVC_CLASS_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_SVC_CLASS_ID, _val); \
((_var) |= ((_val) << HTT_T2H_SAWF_DEF_QUEUES_MAP_REPORT_CONF_SVC_CLASS_ID_S)); \
} while (0)
/*
* MSG_TYPE => HTT_T2H_SAWF_MSDUQ_INFO_IND
*
* @details
* When SAWF is enabled and a flow is mapped to a policy during the traffic
* flow if the flow is seen the associated service class is conveyed to the
* target via TCL Data Command. Target on the other hand internally creates the
* MSDUQ. Once the target creates the MSDUQ the target sends the information
* of the newly created MSDUQ and some other identifiers to uniquely identity
* the newly created MSDUQ
*
* |31 27| 24|23 16|15|14 11|10|9 8|7 4|3 0|
* |------------------------------+------------------------+--------------|
* | peer ID | HTT qtype | msg type |
* |---------------------------------+--------------+--+---+-------+------|
* | reserved |AST list index|FO|WC | HLOS | remap|
* | | | | | TID | TID |
* |---------------------+------------------------------------------------|
* | reserved1 | tgt_opaque_id |
* |---------------------+------------------------------------------------|
*
* Header fields:
*
* dword0 - b'7:0 - msg_type: This will be set to
* 0x2e (HTT_T2H_SAWF_MSDUQ_INFO_IND)
* b'15:8 - HTT qtype
* b'31:16 - peer ID
*
* dword1 - b'3:0 - remap TID, as assigned in firmware
* b'7:4 - HLOS TID, as sent by host in TCL Data Command
* hlos_tid : Common to Lithium and Beryllium
* b'9:8 - who_classify_info_sel (WC), as sent by host in
* TCL Data Command : Beryllium
* b10 - flow_override (FO), as sent by host in
* TCL Data Command: Beryllium
* b11:14 - ast_list_idx
* Array index into the list of extension AST entries
* (not the actual AST 16-bit index).
* The ast_list_idx is one-based, with the following
* range of values:
* - legacy targets supporting 16 user-defined
* MSDU queues: 1-2
* - legacy targets supporting 48 user-defined
* MSDU queues: 1-6
* - new targets: 0 (peer_id is used instead)
* Note that since ast_list_idx is one-based,
* the host will need to subtract 1 to use it as an
* index into a list of extension AST entries.
* b15:31 - reserved
*
* dword2 - b'23:0 - tgt_opaque_id Opaque Tx flow number which is a
* unique MSDUQ id in firmware
* b'24:31 - reserved1
*/
PREPACK struct htt_t2h_sawf_msduq_event {
A_UINT32 msg_type : 8,
htt_qtype : 8,
peer_id :16;
A_UINT32 remap_tid : 4,
hlos_tid : 4,
who_classify_info_sel : 2,
flow_override : 1,
ast_list_idx : 4,
reserved :17;
A_UINT32 tgt_opaque_id :24,
reserved1 : 8;
} POSTPACK;
#define HTT_SAWF_MSDUQ_INFO_SIZE (sizeof(struct htt_t2h_sawf_msduq_event))
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_QTYPE_M 0x0000FF00
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_QTYPE_S 8
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_QTYPE_GET(_var) \
(((_var) & HTT_T2H_SAWF_MSDUQ_INFO_HTT_QTYPE_M) >> \
HTT_T2H_SAWF_MSDUQ_INFO_HTT_QTYPE_S)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_QTYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_SAWF_MSDUQ_INFO_HTT_QTYPE, _val); \
((_var) |= ((_val) << HTT_T2H_SAWF_MSDUQ_INFO_HTT_QTYPE_S));\
} while (0)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_PEER_ID_M 0xFFFF0000
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_PEER_ID_S 16
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_PEER_ID_GET(_var) \
(((_var) & HTT_T2H_SAWF_MSDUQ_INFO_HTT_PEER_ID_M) >> \
HTT_T2H_SAWF_MSDUQ_INFO_HTT_PEER_ID_S)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_SAWF_MSDUQ_INFO_HTT_PEER_ID, _val); \
((_var) |= ((_val) << HTT_T2H_SAWF_MSDUQ_INFO_HTT_PEER_ID_S)); \
} while (0)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_REMAP_TID_M 0x0000000F
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_REMAP_TID_S 0
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_REMAP_TID_GET(_var) \
(((_var) & HTT_T2H_SAWF_MSDUQ_INFO_HTT_REMAP_TID_M) >> \
HTT_T2H_SAWF_MSDUQ_INFO_HTT_REMAP_TID_S)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_REMAP_TID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_SAWF_MSDUQ_INFO_HTT_REMAP_TID, _val); \
((_var) |= ((_val) << HTT_T2H_SAWF_MSDUQ_INFO_HTT_REMAP_TID_S)); \
} while (0)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_HLOS_TID_M 0x000000F0
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_HLOS_TID_S 4
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_HLOS_TID_GET(_var) \
(((_var) & HTT_T2H_SAWF_MSDUQ_INFO_HTT_HLOS_TID_M) >> \
HTT_T2H_SAWF_MSDUQ_INFO_HTT_HLOS_TID_S)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_HLOS_TID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_SAWF_MSDUQ_INFO_HTT_HLOS_TID, _val); \
((_var) |= ((_val) << HTT_T2H_SAWF_MSDUQ_INFO_HTT_HLOS_TID_S)); \
} while (0)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_WHO_CLASS_INFO_SEL_M 0x00000300
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_WHO_CLASS_INFO_SEL_S 8
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_WHO_CLASS_INFO_SEL_GET(_var) \
(((_var) & HTT_T2H_SAWF_MSDUQ_INFO_HTT_WHO_CLASS_INFO_SEL_M) >> \
HTT_T2H_SAWF_MSDUQ_INFO_HTT_WHO_CLASS_INFO_SEL_S)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_WHO_CLASS_INFO_SEL_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_SAWF_MSDUQ_INFO_HTT_WHO_CLASS_INFO_SEL, _val); \
((_var) |= ((_val) << HTT_T2H_SAWF_MSDUQ_INFO_HTT_WHO_CLASS_INFO_SEL_S)); \
} while (0)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_FLOW_OVERRIDE_M 0x00000400
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_FLOW_OVERRIDE_S 10
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_FLOW_OVERRIDE_GET(_var) \
(((_var) & HTT_T2H_SAWF_MSDUQ_INFO_HTT_FLOW_OVERRIDE_M) >> \
HTT_T2H_SAWF_MSDUQ_INFO_HTT_FLOW_OVERRIDE_S)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_FLOW_OVERRIDE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_SAWF_MSDUQ_INFO_HTT_FLOW_OVERRIDE, _val); \
((_var) |= ((_val) << HTT_T2H_SAWF_MSDUQ_INFO_HTT_FLOW_OVERRIDE_S)); \
} while (0)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_AST_LIST_IDX_M 0x00007800
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_AST_LIST_IDX_S 11
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_AST_LIST_IDX_GET(_var) \
(((_var) & HTT_T2H_SAWF_MSDUQ_INFO_HTT_AST_LIST_IDX_M) >> \
HTT_T2H_SAWF_MSDUQ_INFO_HTT_AST_LIST_IDX_S)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_AST_LIST_IDX_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_SAWF_MSDUQ_INFO_HTT_AST_LIST_IDX, _val); \
((_var) |= ((_val) << HTT_T2H_SAWF_MSDUQ_INFO_HTT_AST_LIST_IDX_S)); \
} while (0)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_TGT_OPAQUE_ID_M 0x00FFFFFF
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_TGT_OPAQUE_ID_S 0
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_TGT_OPAQUE_ID_GET(_var) \
(((_var) & HTT_T2H_SAWF_MSDUQ_INFO_HTT_TGT_OPAQUE_ID_M) >> \
HTT_T2H_SAWF_MSDUQ_INFO_HTT_TGT_OPAQUE_ID_S)
#define HTT_T2H_SAWF_MSDUQ_INFO_HTT_TGT_OPAQUE_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_SAWF_MSDUQ_INFO_HTT_TGT_OPAQUE_ID, _val); \
((_var) |= ((_val) << HTT_T2H_SAWF_MSDUQ_INFO_HTT_TGT_OPAQUE_ID_S)); \
} while (0)
/**
* @brief target -> PPDU id format indication
*
* MSG_TYPE => HTT_T2H_PPDU_ID_FMT_IND
*
* @details
* The following field definitions describe the format of the HTT target
* to host PPDU ID format indication message.
* hwsch_cmd_id :- A number per ring, increases by one with each HWSCH command.
* ring_id :- HWSCH ring id in which this PPDU was enqueued.
* seq_idx :- Sequence control index of this PPDU.
* link_id :- HW link ID of the link in which the PPDU was enqueued.
* seq_cmd_type:- WHAL_TXSEND_FTYPE (SU Data, MU Data, SGEN frames etc.)
* tqm_cmd:-
*
* |31 27|26 22|21 17| 16 |15 11|10 8|7 6|5 1| 0 |
* |--------------------------------------------------+------------------------|
* | rsvd0 | msg type |
* |-----+----------+----------+---------+-----+----------+----------+---------|
* |rsvd2|ring_id OF|ring_id NB|ring_id V|rsvd1|cmd_id OF |cmd_id NB |cmd_id V |
* |-----+----------+----------+---------+-----+----------+----------+---------|
* |rsvd4|link_id OF|link_id NB|link_id V|rsvd3|seq_idx OF|seq_idx NB|seq_idx V|
* |-----+----------+----------+---------+-----+----------+----------+---------|
* |rsvd6|tqm_cmd OF|tqm_cmd NB|tqm_cmd V|rsvd5|seq_cmd OF|seq_cmd NB|seq_cmd V|
* |-----+----------+----------+---------+-----+----------+----------+---------|
* |rsvd8| crc OF | crc NB | crc V |rsvd7|mac_id OF |mac_id NB |mac_id V |
* |-----+----------+----------+---------+-----+----------+----------+---------|
* Where: OF = bit offset, NB = number of bits, V = valid
* The message is interpreted as follows:
*
* dword0 - b'7:0 - msg_type: This will be set to
* HTT_T2H_PPDU_ID_FMT_IND
* value: 0x30
*
* dword0 - b'31:8 - reserved
*
* dword1 - b'0:0 - field to indicate whether hwsch_cmd_id is valid or not
*
* dword1 - b'5:1 - number of bits in hwsch_cmd_id
*
* dword1 - b'10:6 - offset of hwsch_cmd_id (in number of bits)
*
* dword1 - b'15:11 - reserved for future use
*
* dword1 - b'16:16 - field to indicate whether ring_id is valid or not
*
* dword1 - b'21:17 - number of bits in ring_id
*
* dword1 - b'26:22 - offset of ring_id (in number of bits)
*
* dword1 - b'31:27 - reserved for future use
*
* dword2 - b'0:0 - field to indicate whether sequence index is valid or not
*
* dword2 - b'5:1 - number of bits in sequence index
*
* dword2 - b'10:6 - offset of sequence index (in number of bits)
*
* dword2 - b'15:11 - reserved for future use
*
* dword2 - b'16:16 - field to indicate whether link_id is valid or not
*
* dword2 - b'21:17 - number of bits in link_id
*
* dword2 - b'26:22 - offset of link_id (in number of bits)
*
* dword2 - b'31:27 - reserved for future use
*
* dword3 - b'0:0 - field to indicate whether seq_cmd_type is valid or not
*
* dword3 - b'5:1 - number of bits in seq_cmd_type
*
* dword3 - b'10:6 - offset of seq_cmd_type (in number of bits)
*
* dword3 - b'15:11 - reserved for future use
*
* dword3 - b'16:16 - field to indicate whether tqm_cmd is valid or not
*
* dword3 - b'21:17 - number of bits in tqm_cmd
*
* dword3 - b'26:22 - offset of tqm_cmd (in number of bits)
*
* dword3 - b'31:27 - reserved for future use
*
* dword4 - b'0:0 - field to indicate whether mac_id is valid or not
*
* dword4 - b'5:1 - number of bits in mac_id
*
* dword4 - b'10:6 - offset of mac_id (in number of bits)
*
* dword4 - b'15:11 - reserved for future use
*
* dword4 - b'16:16 - field to indicate whether crc is valid or not
*
* dword4 - b'21:17 - number of bits in crc
*
* dword4 - b'26:22 - offset of crc (in number of bits)
*
* dword4 - b'31:27 - reserved for future use
*
*/
#define HTT_PPDU_ID_FMT_IND_VALID_BITS15_0_M 0x00000001
#define HTT_PPDU_ID_FMT_IND_VALID_BITS15_0_S 0
#define HTT_PPDU_ID_FMT_IND_BITS_BITS15_0_M 0x0000003E
#define HTT_PPDU_ID_FMT_IND_BITS_BITS15_0_S 1
#define HTT_PPDU_ID_FMT_IND_OFFSET_BITS15_0_M 0x000007C0
#define HTT_PPDU_ID_FMT_IND_OFFSET_BITS15_0_S 6
#define HTT_PPDU_ID_FMT_IND_VALID_BITS31_16_M 0x00010000
#define HTT_PPDU_ID_FMT_IND_VALID_BITS31_16_S 16
#define HTT_PPDU_ID_FMT_IND_BITS_BITS31_16_M 0x003E0000
#define HTT_PPDU_ID_FMT_IND_BITS_BITS31_16_S 17
#define HTT_PPDU_ID_FMT_IND_OFFSET_BITS31_16_M 0x07C00000
#define HTT_PPDU_ID_FMT_IND_OFFSET_BITS31_16_S 22
/* macros for accessing lower 16 bits in dword */
#define HTT_PPDU_ID_FMT_IND_VALID_SET_BITS15_0(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_PPDU_ID_FMT_IND_VALID_BITS15_0, value); \
(word) |= (value) << HTT_PPDU_ID_FMT_IND_VALID_BITS15_0_S; \
} while (0)
#define HTT_PPDU_ID_FMT_IND_VALID_GET_BITS15_0(word) \
(((word) & HTT_PPDU_ID_FMT_IND_VALID_BITS15_0_M) >> HTT_PPDU_ID_FMT_IND_VALID_BITS15_0_S)
#define HTT_PPDU_ID_FMT_IND_BITS_SET_BITS15_0(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_PPDU_ID_FMT_IND_BITS_BITS15_0, value); \
(word) |= (value) << HTT_PPDU_ID_FMT_IND_BITS_BITS15_0_S; \
} while (0)
#define HTT_PPDU_ID_FMT_IND_BITS_GET_BITS15_0(word) \
(((word) & HTT_PPDU_ID_FMT_IND_BITS_BITS15_0_M) >> HTT_PPDU_ID_FMT_IND_BITS_BITS15_0_S)
#define HTT_PPDU_ID_FMT_IND_OFFSET_SET_BITS15_0(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_PPDU_ID_FMT_IND_OFFSET_BITS15_0, value); \
(word) |= (value) << HTT_PPDU_ID_FMT_IND_OFFSET_BITS15_0_S; \
} while (0)
#define HTT_PPDU_ID_FMT_IND_OFFSET_GET_BITS15_0(word) \
(((word) & HTT_PPDU_ID_FMT_IND_OFFSET_BITS15_0_M) >> HTT_PPDU_ID_FMT_IND_OFFSET_BITS15_0_S)
/* macros for accessing upper 16 bits in dword */
#define HTT_PPDU_ID_FMT_IND_VALID_SET_BITS31_16(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_PPDU_ID_FMT_IND_VALID_BITS31_16, value); \
(word) |= (value) << HTT_PPDU_ID_FMT_IND_VALID_BITS31_16_S; \
} while (0)
#define HTT_PPDU_ID_FMT_IND_VALID_GET_BITS31_16(word) \
(((word) & HTT_PPDU_ID_FMT_IND_VALID_BITS31_16_M) >> HTT_PPDU_ID_FMT_IND_VALID_BITS31_16_S)
#define HTT_PPDU_ID_FMT_IND_BITS_SET_BITS31_16(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_PPDU_ID_FMT_IND_BITS_BITS31_16, value); \
(word) |= (value) << HTT_PPDU_ID_FMT_IND_BITS_BITS31_16_S; \
} while (0)
#define HTT_PPDU_ID_FMT_IND_BITS_GET_BITS31_16(word) \
(((word) & HTT_PPDU_ID_FMT_IND_BITS_BITS31_16_M) >> HTT_PPDU_ID_FMT_IND_BITS_BITS31_16_S)
#define HTT_PPDU_ID_FMT_IND_OFFSET_SET_BITS31_16(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_PPDU_ID_FMT_IND_OFFSET_BITS31_16, value); \
(word) |= (value) << HTT_PPDU_ID_FMT_IND_OFFSET_BITS31_16_S; \
} while (0)
#define HTT_PPDU_ID_FMT_IND_OFFSET_GET_BITS31_16(word) \
(((word) & HTT_PPDU_ID_FMT_IND_OFFSET_BITS31_16_M) >> HTT_PPDU_ID_FMT_IND_OFFSET_BITS31_16_S)
#define HTT_PPDU_ID_FMT_IND_HWSCH_CMD_ID_VALID_SET \
HTT_PPDU_ID_FMT_IND_VALID_SET_BITS15_0
#define HTT_PPDU_ID_FMT_IND_HWSCH_CMD_ID_BITS_SET \
HTT_PPDU_ID_FMT_IND_BITS_SET_BITS15_0
#define HTT_PPDU_ID_FMT_IND_HWSCH_CMD_ID_OFFSET_SET \
HTT_PPDU_ID_FMT_IND_OFFSET_SET_BITS15_0
#define HTT_PPDU_ID_FMT_IND_RING_ID_VALID_SET \
HTT_PPDU_ID_FMT_IND_VALID_SET_BITS31_16
#define HTT_PPDU_ID_FMT_IND_RING_ID_BITS_SET \
HTT_PPDU_ID_FMT_IND_BITS_SET_BITS31_16
#define HTT_PPDU_ID_FMT_IND_RING_ID_OFFSET_SET \
HTT_PPDU_ID_FMT_IND_OFFSET_SET_BITS31_16
#define HTT_PPDU_ID_FMT_IND_SEQ_IDX_VALID_SET \
HTT_PPDU_ID_FMT_IND_VALID_SET_BITS15_0
#define HTT_PPDU_ID_FMT_IND_SEQ_IDX_BITS_SET \
HTT_PPDU_ID_FMT_IND_BITS_SET_BITS15_0
#define HTT_PPDU_ID_FMT_IND_SEQ_IDX_OFFSET_SET \
HTT_PPDU_ID_FMT_IND_OFFSET_SET_BITS15_0
#define HTT_PPDU_ID_FMT_IND_LINK_ID_VALID_SET \
HTT_PPDU_ID_FMT_IND_VALID_SET_BITS31_16
#define HTT_PPDU_ID_FMT_IND_LINK_ID_BITS_SET \
HTT_PPDU_ID_FMT_IND_BITS_SET_BITS31_16
#define HTT_PPDU_ID_FMT_IND_LINK_ID_OFFSET_SET \
HTT_PPDU_ID_FMT_IND_OFFSET_SET_BITS31_16
#define HTT_PPDU_ID_FMT_IND_SEQ_CMD_TYPE_VALID_SET \
HTT_PPDU_ID_FMT_IND_VALID_SET_BITS15_0
#define HTT_PPDU_ID_FMT_IND_SEQ_CMD_TYPE_BITS_SET \
HTT_PPDU_ID_FMT_IND_BITS_SET_BITS15_0
#define HTT_PPDU_ID_FMT_IND_SEQ_CMD_TYPE_OFFSET_SET \
HTT_PPDU_ID_FMT_IND_OFFSET_SET_BITS15_0
#define HTT_PPDU_ID_FMT_IND_TQM_CMD_VALID_SET \
HTT_PPDU_ID_FMT_IND_VALID_SET_BITS31_16
#define HTT_PPDU_ID_FMT_IND_TQM_CMD_BITS_SET \
HTT_PPDU_ID_FMT_IND_BITS_SET_BITS31_16
#define HTT_PPDU_ID_FMT_IND_TQM_CMD_OFFSET_SET \
HTT_PPDU_ID_FMT_IND_OFFSET_SET_BITS31_16
#define HTT_PPDU_ID_FMT_IND_MAC_ID_TYPE_VALID_SET \
HTT_PPDU_ID_FMT_IND_VALID_SET_BITS15_0
#define HTT_PPDU_ID_FMT_IND_MAC_ID_TYPE_BITS_SET \
HTT_PPDU_ID_FMT_IND_BITS_SET_BITS15_0
#define HTT_PPDU_ID_FMT_IND_MAC_ID_TYPE_OFFSET_SET \
HTT_PPDU_ID_FMT_IND_OFFSET_SET_BITS15_0
#define HTT_PPDU_ID_FMT_IND_CRC_VALID_SET \
HTT_PPDU_ID_FMT_IND_VALID_SET_BITS31_16
#define HTT_PPDU_ID_FMT_IND_CRC_BITS_SET \
HTT_PPDU_ID_FMT_IND_BITS_SET_BITS31_16
#define HTT_PPDU_ID_FMT_IND_CRC_OFFSET_SET \
HTT_PPDU_ID_FMT_IND_OFFSET_SET_BITS31_16
/* offsets in number dwords */
#define HTT_PPDU_ID_FMT_IND_HWSCH_CMD_ID_OFFSET 1
#define HTT_PPDU_ID_FMT_IND_RING_ID_OFFSET 1
#define HTT_PPDU_ID_FMT_IND_SEQ_IDX_OFFSET 2
#define HTT_PPDU_ID_FMT_IND_LINK_ID_OFFSET 2
#define HTT_PPDU_ID_FMT_IND_SEQ_CMD_TYPE_OFFSET 3
#define HTT_PPDU_ID_FMT_IND_TQM_CMD_OFFSET 3
#define HTT_PPDU_ID_FMT_IND_MAC_ID_OFFSET 4
#define HTT_PPDU_ID_FMT_IND_CRC_OFFSET 4
typedef struct {
A_UINT32 msg_type: 8, /* bits 7:0 */
rsvd0: 24;/* bits 31:8 */
A_UINT32 hwsch_cmd_id_valid: 1, /* bits 0:0 */
hwsch_cmd_id_bits: 5, /* bits 5:1 */
hwsch_cmd_id_offset: 5, /* bits 10:6 */
rsvd1: 5, /* bits 15:11 */
ring_id_valid: 1, /* bits 16:16 */
ring_id_bits: 5, /* bits 21:17 */
ring_id_offset: 5, /* bits 26:22 */
rsvd2: 5; /* bits 31:27 */
A_UINT32 seq_idx_valid: 1, /* bits 0:0 */
seq_idx_bits: 5, /* bits 5:1 */
seq_idx_offset: 5, /* bits 10:6 */
rsvd3: 5, /* bits 15:11 */
link_id_valid: 1, /* bits 16:16 */
link_id_bits: 5, /* bits 21:17 */
link_id_offset: 5, /* bits 26:22 */
rsvd4: 5; /* bits 31:27 */
A_UINT32 seq_cmd_type_valid: 1, /* bits 0:0 */
seq_cmd_type_bits: 5, /* bits 5:1 */
seq_cmd_type_offset: 5, /* bits 10:6 */
rsvd5: 5, /* bits 15:11 */
tqm_cmd_valid: 1, /* bits 16:16 */
tqm_cmd_bits: 5, /* bits 21:17 */
tqm_cmd_offset: 5, /* bits 26:12 */
rsvd6: 5; /* bits 31:27 */
A_UINT32 mac_id_valid: 1, /* bits 0:0 */
mac_id_bits: 5, /* bits 5:1 */
mac_id_offset: 5, /* bits 10:6 */
rsvd8: 5, /* bits 15:11 */
crc_valid: 1, /* bits 16:16 */
crc_bits: 5, /* bits 21:17 */
crc_offset: 5, /* bits 26:12 */
rsvd9: 5; /* bits 31:27 */
} htt_t2h_ppdu_id_fmt_ind_t;
/**
* @brief target -> host RX_CCE_SUPER_RULE setup done message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_CCE_SUPER_RULE_SETUP_DONE
*
* @details
* HTT_T2H_MSG_TYPE_RX_CCE_SUPER_RULE_SETUP_DONE message is sent by the target
* when RX_CCE_SUPER_RULE setup is done
*
* This message shows the configuration results after the setup operation.
* It will always be sent to host.
* The message would appear as follows:
*
* |31 24|23 16|15 8|7 0|
* |-----------------+-----------------+----------------+----------------|
* | result | response_type | pdev_id | msg_type |
* |---------------------------------------------------------------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to 0x33
* (HTT_T2H_MSG_TYPE_RX_CCE_SUPER_RULE_SETUP_DONE)
* b'8:15 - pdev_id: Identify which pdev RX_CCE_SUPER_RULE is setup on
* b'16:23 - response_type: Indicate the response type of this setup
* done msg
* 0: HTT_RX_CCE_SUPER_RULE_SETUP_REQ_RESPONSE,
* response to HTT_RX_CCE_SUPER_RULE_SETUP_REQUEST
* 1: HTT_RX_CCE_SUPER_RULE_INSTALL_RESPONSE,
* response to HTT_RX_CCE_SUPER_RULE_INSTALL
* 2: HTT_RX_CCE_SUPER_RULE_RELEASE_RESPONSE,
* response to HTT_RX_CCE_SUPER_RULE_RELEASE
* b'24:31 - result: Indicate result of setup operation
* For HTT_RX_CCE_SUPER_RULE_SETUP_REQ_RESPONSE:
* b'24 - is_rule_enough: indicate if there are
* enough free cce rule slots
* 0: not enough
* 1: enough
* b'25:31 - avail_rule_num: indicate the number of
* remaining free cce rule slots, only makes sense
* when is_rule_enough = 0
* For HTT_RX_CCE_SUPER_RULE_INSTALL_RESPONSE:
* b'24 - cfg_result_0: indicate the config result
* of RX_CCE_SUPER_RULE_0
* 0: Install/Uninstall fails
* 1: Install/Uninstall succeeds
* b'25 - cfg_result_1: indicate the config result
* of RX_CCE_SUPER_RULE_1
* 0: Install/Uninstall fails
* 1: Install/Uninstall succeeds
* b'26:31 - reserved
* For HTT_RX_CCE_SUPER_RULE_RELEASE_RESPONSE:
* b'24 - cfg_result_0: indicate the config result
* of RX_CCE_SUPER_RULE_0
* 0: Release fails
* 1: Release succeeds
* b'25 - cfg_result_1: indicate the config result
* of RX_CCE_SUPER_RULE_1
* 0: Release fails
* 1: Release succeeds
* b'26:31 - reserved
*/
enum htt_rx_cce_super_rule_setup_done_response_type {
HTT_RX_CCE_SUPER_RULE_SETUP_REQ_RESPONSE = 0,
HTT_RX_CCE_SUPER_RULE_INSTALL_RESPONSE,
HTT_RX_CCE_SUPER_RULE_RELEASE_RESPONSE,
/*All reply type should be before this*/
HTT_RX_CCE_SUPER_RULE_SETUP_INVALID_RESPONSE,
};
PREPACK struct htt_rx_cce_super_rule_setup_done_t {
A_UINT8 msg_type;
A_UINT8 pdev_id;
A_UINT8 response_type;
union {
struct {
/* For HTT_RX_CCE_SUPER_RULE_SETUP_REQ_RESPONSE */
A_UINT8 is_rule_enough: 1,
avail_rule_num: 7;
};
struct {
/*
* For HTT_RX_CCE_SUPER_RULE_INSTALL_RESPONSE and
* HTT_RX_CCE_SUPER_RULE_RELEASE_RESPONSE
*/
A_UINT8 cfg_result_0: 1,
cfg_result_1: 1,
rsvd: 6;
};
} result;
} POSTPACK;
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_SZ (sizeof(struct htt_rx_cce_super_rule_setup_done_t))
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_PDEV_ID_M 0x0000ff00
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_PDEV_ID_S 8
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_PDEV_ID_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_DONE_PDEV_ID_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_DONE_PDEV_ID_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_DONE_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_DONE_PDEV_ID_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_M 0x00ff0000
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_S 16
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESULT_M 0xff000000
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESULT_S 24
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESULT_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESULT_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESULT_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESULT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESULT, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_DONE_RESULT_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_IS_RULE_ENOUGH_M 0x01000000
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_IS_RULE_ENOUGH_S 24
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_IS_RULE_ENOUGH_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_DONE_IS_RULE_ENOUGH_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_DONE_IS_RULE_ENOUGH_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_IS_RULE_ENOUGH_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_DONE_IS_RULE_ENOUGH, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_DONE_IS_RULE_ENOUGH_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_AVAIL_RULE_NUM_M 0xFE000000
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_AVAIL_RULE_NUM_S 25
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_AVAIL_RULE_NUM_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_DONE_AVAIL_RULE_NUM_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_DONE_AVAIL_RULE_NUM_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_AVAIL_RULE_NUM_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_DONE_AVAIL_RULE_NUM, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_DONE_AVAIL_RULE_NUM_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_0_M 0x01000000
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_0_S 24
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_0_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_0_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_0_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_0_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_0, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_0_S)); \
} while (0)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_1_M 0x02000000
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_1_S 25
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_1_GET(_var) \
(((_var) & HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_1_M) >> \
HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_1_S)
#define HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_1_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_1, _val); \
((_var) |= ((_val) << HTT_RX_CCE_SUPER_RULE_SETUP_DONE_CFG_RESULT_1_S)); \
} while (0)
/**
* @brief target -> host TX_LCE_SUPER_RULE setup done message
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_TX_LCE_SUPER_RULE_SETUP_DONE
*
* @details
* HTT_T2H_MSG_TYPE_TX_LCE_SUPER_RULE_SETUP_DONE message is sent by the target
* when TX_SUPER_RULE setup is done.
*
* This message shows the configuration results after the setup operation.
* It will always be sent to host.
* The message would appear as follows:
*
* |31 24|23 16|15 8|7 0|
* |-----------------+-----------------+----------------+----------------|
* | reserved | response_type | pdev_id | msg_type |
* |---------------------------------------------------------------------|
* | tx_super_rule_result[0] |
* |---------------------------------------------------------------------|
* | tx_super_rule_result[1] |
* |---------------------------------------------------------------------|
* | tx_super_rule_result[2] |
* |---------------------------------------------------------------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to 0x3b
* (HTT_T2H_MSG_TYPE_TX_LCE_SUPER_RULE_SETUP_DONE)
* b'8:15 - pdev_id: Identify which pdev TX_SUPER_RULE is setup on
* b'16:23 - response_type: Indicate the response type of this setup
* done msg
* 0: HTT_TX_LCE_SUPER_RULE_INSTALL_RESPONSE,
* response to HTT_TX_LCE_SUPER_RULE_INSTALL
* 1: HTT_TX_LCE_SUPER_RULE_RELEASE_RESPONSE,
* response to HTT_TX_LCE_SUPER_RULE_RELEASE or
* FW internal trigger on LCE rule release
* b'24:31 - reserved:
*
* Each tx_super_rule_result structure would appear as follows:
* |31 24|23 16|15 8|7 0|
* |---------------------------------------------------------------------|
* | is_valid | result | l4_dst_port |
* |---------------------------------------------------------------------|
*
* dword0 - b'0:15 - l4_dst_port: destination port corresponding to rule
* which is added/released
* b'16:23 - result: Indicate the result of the operation based on
* the message header's "response_type"
* For HTT_TX_LCE_SUPER_RULE_INSTALL_RESPONSE:
* 0: HTT_TX_LCE_SUPER_RULE_INSTALL_FAIL
* 1: HTT_TX_LCE_SUPER_RULE_INSTALL_SUCCESS
* For HTT_TX_LCE_SUPER_RULE_RELEASE_RESPONSE:
* 0: HTT_TX_LCE_SUPER_RULE_RELEASE_FAIL
* 1: HTT_TX_LCE_SUPER_RULE_RELEASE_SUCCESS
* 2: HTT_TX_LCE_SUPER_RULE_RELEASE_SUCCESS_HIGH_TPUT
*
* The tx_super_rule_result[1] structure is similar.
* The tx_super_rule_result[2] structure is similar.
*/
enum htt_tx_lce_super_rule_setup_done_response_type {
/* Two LCE rules operation responses */
HTT_TX_LCE_SUPER_RULE_INSTALL_RESPONSE = 0,
HTT_TX_LCE_SUPER_RULE_RELEASE_RESPONSE,
/* All reply type should be before this */
HTT_TX_LCE_RULE_SETUP_INVALID_RESPONSE,
};
enum htt_tx_super_rule_install_response_result {
HTT_TX_LCE_SUPER_RULE_INSTALL_FAIL = 0,
HTT_TX_LCE_SUPER_RULE_INSTALL_SUCCESS,
};
enum htt_tx_super_rule_release_response_result{
HTT_TX_LCE_SUPER_RULE_RELEASE_FAIL = 0,
HTT_TX_LCE_SUPER_RULE_RELEASE_SUCCESS,
HTT_TX_LCE_SUPER_RULE_RELEASE_SUCCESS_HIGH_TPUT,
};
typedef struct {
A_UINT32 l4_dst_port: 16,
/* result:
* htt_tx_super_rule_install_response_result or
* htt_tx_super_rule_release_response_result
*/
result: 8,
is_valid: 8;
} htt_tx_lce_super_rule_result_t;
PREPACK struct htt_tx_lce_super_rule_setup_done_t {
A_UINT8 msg_type;
A_UINT8 pdev_id;
A_UINT8 response_type; /* htt_tx_lce_super_rule_setup_done_response_type */
A_UINT8 reserved;
htt_tx_lce_super_rule_result_t tx_super_rule_result[HTT_TX_LCE_SUPER_RULE_SETUP_NUM];
} POSTPACK;
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_SZ (sizeof(struct htt_tx_lce_super_rule_setup_done_t))
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_PDEV_ID_M 0x0000ff00
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_PDEV_ID_S 8
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_PDEV_ID_GET(_var) \
(((_var) & HTT_TX_LCE_SUPER_RULE_SETUP_DONE_PDEV_ID_M) >> \
HTT_TX_LCE_SUPER_RULE_SETUP_DONE_PDEV_ID_S)
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_LCE_SUPER_RULE_SETUP_DONE_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_TX_LCE_SUPER_RULE_SETUP_DONE_PDEV_ID_S)); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_M 0x00ff0000
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_S 16
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_GET(_var) \
(((_var) & HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_M) >> \
HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_S)
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE, _val); \
((_var) |= ((_val) << HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESPONSE_TYPE_S)); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_L4_DST_PORT_M 0x0000ffff
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_L4_DST_PORT_S 0
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_L4_DST_PORT_GET(_var) \
(((_var) & HTT_TX_LCE_SUPER_RULE_SETUP_DONE_L4_DST_PORT_M) >> \
HTT_TX_LCE_SUPER_RULE_SETUP_DONE_L4_DST_PORT_S)
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_L4_DST_PORT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_LCE_SUPER_RULE_SETUP_DONE_L4_DST_PORT, _val); \
((_var) |= ((_val) << HTT_TX_LCE_SUPER_RULE_SETUP_DONE_L4_DST_PORT_S)); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESULT_M 0x00ff0000
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESULT_S 16
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESULT_GET(_var) \
(((_var) & HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESULT_M) >> \
HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESULT_S)
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESULT_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESULT, _val); \
((_var) |= ((_val) << HTT_TX_LCE_SUPER_RULE_SETUP_DONE_RESULT_S)); \
} while (0)
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_IS_VALID_M 0xff000000
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_IS_VALID_S 24
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_IS_VALID_GET(_var) \
(((_var) & HTT_TX_LCE_SUPER_RULE_SETUP_DONE_IS_VALID_M) >> \
HTT_TX_LCE_SUPER_RULE_SETUP_DONE_IS_VALID_S)
#define HTT_TX_LCE_SUPER_RULE_SETUP_DONE_IS_VALID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_TX_LCE_SUPER_RULE_SETUP_DONE_IS_VALID, _val); \
((_var) |= ((_val) << HTT_TX_LCE_SUPER_RULE_SETUP_DONE_IS_VALID_S)); \
} while (0)
/**
* THE BELOW MESSAGE HAS BEEN DEPRECATED
*======================================
* @brief target -> host CoDel MSDU queue latencies array configuration
*
* MSG_TYPE => HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_IND
*
* @details
* The HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_IND message is used
* by the target to inform the host of the location and size of the DDR array of
* per MSDU queue latency metrics. This array is updated by the host and
* read by the target. The target uses these metric values to determine
* which MSDU queues have latencies exceeding their CoDel latency target.
*
* |31 16|15 8|7 0|
* |-------------------------------------------+----------|
* | number of array elements | reserved | MSG_TYPE |
* |-------------------------------------------+----------|
* | array physical address, low bits |
* |------------------------------------------------------|
* | array physical address, high bits |
* |------------------------------------------------------|
* Header fields:
* - MSG_TYPE
* Bits 7:0
* Purpose: Identifies this as a CoDel MSDU queue latencies
* array configuration message.
* Value: (HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_IND)
* - NUM_ELEM
* Bits 31:16
* Purpose: Inform the host of the length of the MSDU queue latencies array.
* Value: Specifies the number of elements in the MSDU queue latency
* metrics array. This value is the same as the maximum number of
* MSDU queues supported by the target.
* Since each array element is 16 bits, the size in bytes of the
* MSDU queue latency metrics array is twice the number of elements.
* - PADDR_LOW
* Bits 31:0
* Purpose: Inform the host of the MSDU queue latencies array's location.
* Value: Lower 32 bits of the physical address of the MSDU queue latency
* metrics array.
* - PADDR_HIGH
* Bits 31:0
* Purpose: Inform the host of the MSDU queue latencies array's location.
* Value: Upper 32 bits of the physical address of the MSDU queue latency
* metrics array.
*/
typedef struct {
A_UINT32 msg_type: 8, /* bits 7:0 */
reserved: 8, /* bits 15:8 */
num_elem: 16; /* bits 31:16 */
A_UINT32 paddr_low;
A_UINT32 paddr_high;
} htt_t2h_codel_msduq_latencies_array_cfg_int_t; /* DEPRECATED */
#define HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_SIZE 12 /* bytes */
#define HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_INT_NUM_ELEM_M 0xffff0000
#define HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_INT_NUM_ELEM_S 16
#define HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_INT_NUM_ELEM_GET(_var) \
(((_var) & HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_INT_NUM_ELEM_M) >> \
HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_INT_NUM_ELEM_S)
#define HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_INT_NUM_ELEM_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL( \
HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_INT_NUM_ELEM, _val); \
((_var) |= ((_val) << \
HTT_T2H_CODEL_MSDUQ_LATENCIES_ARRAY_CFG_INT_NUM_ELEM_S)); \
} while (0)
/*
* This CoDel MSDU queue latencies array whose location and number of
* elements are specified by this HTT_T2H message consists of 16-bit elements
* that each specify a statistical summary (min) of a MSDU queue's latency,
* using milliseconds units.
*/
#define HTT_CODEL_MSDUQ_LATENCIES_ARRAY_ELEM_BYTES 2
/**
* @brief target -> host rx completion indication message definition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_RX_DATA_IND
*
* @details
* The following diagram shows the format of the Rx completion indication sent
* from the target to the host
*
* |31|29|28 24|23 12|11 9|8| 7|6|5|4|3|2|1|0|
* |---------------+----------------------------+----------------|
* | vdev_id | peer_id | msg_type |
* hdr: |---------------+--------------------------+-+----------------|
* | rsvd0 |F| msdu_cnt |
* pyld: |==========================================+=+================|
* MSDU 0 | buf addr lo (bits 31:0) |
* |-----+--------------------------------------+----------------|
* |rsvd1| SW buffer cookie | buf addr hi |
* |--+--+-----------------------------+--------+--+-+-+-+-+-+-+-|
* |R2| W| MSDU length | TID |MC|D|S|C|L|F|R|M|
* |-------------------------------------------------+---------+-|
* | rsvd3 | err info|E|
* |=================================================+=========+=|
* MSDU 1 | buf addr lo (bits 31:0) |
* : ... :
* | rsvd3 | err info|E|
* |-------------------------------------------------------------|
* Where:
* F = fragment
* M = MPDU retry bit
* R = raw MPDU frame
* F = first MSDU in MPDU
* L = last MSDU in MPDU
* C = MSDU continuation
* S = Souce Addr is valid
* D = Dest Addr is valid
* MC = Dest Addr is multicast / broadcast
* W = is first MSDU after WoW wakeup
* R2 = rsvd2
* E = error valid
*/
/* htt_t2h_rx_data_msdu_err:
* To be filled in "htt_t2h_rx_data_msdu_info.error_info" field
* when FW forwards MSDU to host.
*/
typedef enum htt_t2h_rx_data_msdu_err {
/* ERR_DECRYPT:
* FW sets this when rxdma_error_code = <enum 3 rxdma_decrypt_err>.
* host maintains error stats, recycles buffer.
*/
HTT_RXDATA_ERR_DECRYPT = 0,
/* ERR_TKIP_MIC:
* FW sets this when rxdma_error_code = <enum 4 rxdma_tkip_mic_err>.
* Host maintains error stats, recycles buffer, sends notification to
* middleware.
*/
HTT_RXDATA_ERR_TKIP_MIC = 1,
/* ERR_UNENCRYPTED:
* FW sets this when rxdma_error_code = <enum 5 rxdma_unecrypted_err>.
* Host maintains error stats, recycles buffer.
*/
HTT_RXDATA_ERR_UNENCRYPTED = 2,
/* ERR_MSDU_LIMIT:
* FW sets this when rxdma_error_code = <enum 7 rxdma_msdu_limit_err>.
* Host maintains error stats, recycles buffer.
*/
HTT_RXDATA_ERR_MSDU_LIMIT = 3,
/* ERR_FLUSH_REQUEST:
* FW sets this when rxdma_error_code = <enum 13 rxdma_flush_request>.
* Host maintains error stats, recycles buffer.
*/
HTT_RXDATA_ERR_FLUSH_REQUEST = 4,
/* ERR_OOR:
* FW full reorder layer maps this error to <enum 7 regular_frame_OOR>.
* Host maintains error stats, recycles buffer mainly for low
* TCP KPI debugging.
*/
HTT_RXDATA_ERR_OOR = 5,
/* ERR_2K_JUMP:
* FW full reorder layer maps this error to <enum 5 regular_frame_2k_jump>.
* Host maintains error stats, recycles buffer mainly for low
* TCP KPI debugging.
*/
HTT_RXDATA_ERR_2K_JUMP = 6,
/* ERR_ZERO_LEN_MSDU:
* FW sets this error flag for a 0 length MSDU.
* Host maintains error stats, recycles buffer.
*/
HTT_RXDATA_ERR_ZERO_LEN_MSDU = 7,
/* ERR_INVALID_PEER:
* FW sets this error flag when MSDU is recived from invalid PEER
* HOST decides to send DEAUTH or not, recyles buffer.
*/
HTT_RXDATA_ERR_INVALID_PEER = 8,
/* add new error codes here */
HTT_RXDATA_ERR_MAX = 32
} htt_t2h_rx_data_msdu_err_e;
struct htt_t2h_rx_data_ind_t
{
A_UINT32 /* word 0 */
/* msg_type:
* Set to Rx data indication i.e. HTT_T2H_MSG_TYPE_RX_DATA_IND.
*/
msg_type: 8,
peer_id: 16, /* This will provide peer data */
vdev_id: 8; /* This will provide vdev id info */
A_UINT32 /* word 1 */
/* msdu_cnt:
* Total number of MSDUs (htt_t2h_rx_data_msdu_info items) in message.
*/
msdu_cnt: 8,
frag: 1, /* this bit will be set for 802.11 frag MPDU */
rsvd0: 23;
/* NOTE:
* To preserve backwards compatibility,
* no new fields can be added in this struct.
*/
};
struct htt_t2h_rx_data_msdu_info
{
A_UINT32 /* word 0 */
buffer_addr_low : 32;
A_UINT32 /* word 1 */
buffer_addr_high : 8,
sw_buffer_cookie : 21,
/* fw_offloads_inspected:
* When reo_destination_indication is 6 in reo_entrance_ring
* of the RXDMA2REO MPDU upload, all the MSDUs that are part
* of the MPDU are inspected by FW offloads layer, subsequently
* the MSDUs are qualified to be host interested.
* In such case the fw_offloads_inspected is set to 1, else 0.
* This will assist host to not consider such MSDUs for FISA
* flow addition.
*/
fw_offloads_inspected : 1,
rsvd1 : 2;
A_UINT32 /* word 2 */
mpdu_retry_bit : 1, /* used for stats maintenance */
raw_mpdu_frame : 1, /* used for pkt drop and processing */
first_msdu_in_mpdu_flag : 1, /* used for MSDU scatter/gather support */
last_msdu_in_mpdu_flag : 1, /* used for MSDU scatter/gather support */
msdu_continuation : 1, /* used for MSDU scatter/gather support */
sa_is_valid : 1, /* used for HW issue check in
* is_sa_da_idx_valid() */
da_is_valid : 1, /* used for HW issue check and
* intra-BSS forwarding */
da_is_mcbc : 1,
tid_info : 8, /* used for stats maintenance */
msdu_length : 14,
is_first_pkt_after_wkp : 1, /* indicates this is the first rx MSDU
* provided by fw after WoW exit */
rsvd2 : 1;
A_UINT32 /* word 3 */
error_valid : 1, /* Set if the MSDU has any error */
error_info : 5, /* If error_valid is TRUE, then refer to
* "htt_t2h_rx_data_msdu_err_e" for
* checking error reason. */
rsvd3 : 26;
/* NOTE:
* To preserve backwards compatibility,
* no new fields can be added in this struct.
*/
};
/* HTT_RX_DATA_IND_HDR_SIZE: 2 4-byte words
* This is the size of htt_t2h_rx_data_ind_t alone which is fixed overhead
* for every Rx DATA IND sent by FW to host.
*/
#define HTT_RX_DATA_IND_HDR_SIZE (2*4)
/* HTT_RX_DATA_MSDU_INFO_SIZE: 4 4-bytes words
* This is the size of each MSDU detail that will be piggybacked with the
* RX IND header.
*/
#define HTT_RX_DATA_MSDU_INFO_SIZE (4*4)
/* member definitions of htt_t2h_rx_data_ind_t */
#define HTT_RX_DATA_IND_PEER_ID_M 0x00ffff00
#define HTT_RX_DATA_IND_PEER_ID_S 8
#define HTT_RX_DATA_IND_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_IND_PEER_ID, value); \
(word) |= (value) << HTT_RX_DATA_IND_PEER_ID_S; \
} while (0)
#define HTT_RX_DATA_IND_PEER_ID_GET(word) \
(((word) & HTT_RX_DATA_IND_PEER_ID_M) >> HTT_RX_DATA_IND_PEER_ID_S)
#define HTT_RX_DATA_IND_VDEV_ID_M 0xff000000
#define HTT_RX_DATA_IND_VDEV_ID_S 24
#define HTT_RX_DATA_IND_VDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_IND_VDEV_ID, value); \
(word) |= (value) << HTT_RX_DATA_IND_VDEV_ID_S; \
} while (0)
#define HTT_RX_DATA_IND_VDEV_ID_GET(word) \
(((word) & HTT_RX_DATA_IND_VDEV_ID_M) >> HTT_RX_DATA_IND_VDEV_ID_S)
#define HTT_RX_DATA_IND_MSDU_CNT_M 0x000000ff
#define HTT_RX_DATA_IND_MSDU_CNT_S 0
#define HTT_RX_DATA_IND_MSDU_CNT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_IND_MSDU_CNT, value); \
(word) |= (value) << HTT_RX_DATA_IND_MSDU_CNT_S; \
} while (0)
#define HTT_RX_DATA_IND_MSDU_CNT_GET(word) \
(((word) & HTT_RX_DATA_IND_MSDU_CNT_M) >> HTT_RX_DATA_IND_MSDU_CNT_S)
#define HTT_RX_DATA_IND_FRAG_M 0x00000100
#define HTT_RX_DATA_IND_FRAG_S 8
#define HTT_RX_DATA_IND_FRAG_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_IND_FRAG, value); \
(word) |= (value) << HTT_RX_DATA_IND_FRAG_S; \
} while (0)
#define HTT_RX_DATA_IND_FRAG_GET(word) \
(((word) & HTT_RX_DATA_IND_FRAG_M) >> HTT_RX_DATA_IND_FRAG_S)
/* member definitions of htt_t2h_rx_data_msdu_info */
#define HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_LOW_M 0xFFFFFFFF
#define HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_LOW_S 0
#define HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_HIGH_M 0x000000FF
#define HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_HIGH_S 0
#define HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_LOW_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_LOW, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_LOW_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_LOW_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_LOW_M) >> HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_LOW_S)
#define HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_HIGH_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_HIGH, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_HIGH_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_HIGH_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_HIGH_M) >> HTT_RX_DATA_MSDU_INFO_BUFFER_ADDR_HIGH_S)
#define HTT_RX_DATA_MSDU_INFO_SW_BUFFER_COOKIE_M 0x1FFFFF00
#define HTT_RX_DATA_MSDU_INFO_SW_BUFFER_COOKIE_S 8
#define HTT_RX_DATA_MSDU_INFO_SW_BUFFER_COOKIE_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_SW_BUFFER_COOKIE, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_SW_BUFFER_COOKIE_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_SW_BUFFER_COOKIE_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_SW_BUFFER_COOKIE_M) >> HTT_RX_DATA_MSDU_INFO_SW_BUFFER_COOKIE_S)
#define HTT_RX_DATA_MSDU_INFO_FW_OFFLOADS_INSPECTED_M 0x20000000
#define HTT_RX_DATA_MSDU_INFO_FW_OFFLOADS_INSPECTED_S 29
#define HTT_RX_DATA_MSDU_INFO_FW_OFFLOADS_INSPECTED_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_FW_OFFLOADS_INSPECTED, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_FW_OFFLOADS_INSPECTED_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_FW_OFFLOADS_INSPECTED_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_FW_OFFLOADS_INSPECTED_M) >> HTT_RX_DATA_MSDU_INFO_FW_OFFLOADS_INSPECTED_S)
#define HTT_RX_DATA_MSDU_INFO_MPDU_RETRY_BIT_M 0x00000001
#define HTT_RX_DATA_MSDU_INFO_MPDU_RETRY_BIT_S 0
#define HTT_RX_DATA_MSDU_INFO_MPDU_RETRY_BIT_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_MPDU_RETRY_BIT, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_MPDU_RETRY_BIT_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_MPDU_RETRY_BIT_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_MPDU_RETRY_BIT_M) >> HTT_RX_DATA_MSDU_INFO_MPDU_RETRY_BIT_S)
#define HTT_RX_DATA_MSDU_INFO_RAW_MPDU_FRAME_M 0x00000002
#define HTT_RX_DATA_MSDU_INFO_RAW_MPDU_FRAME_S 1
#define HTT_RX_DATA_MSDU_INFO_RAW_MPDU_FRAME_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_RAW_MPDU_FRAME, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_RAW_MPDU_FRAME_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_RAW_MPDU_FRAME_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_RAW_MPDU_FRAME_M) >> HTT_RX_DATA_MSDU_INFO_RAW_MPDU_FRAME_S)
#define HTT_RX_DATA_MSDU_INFO_FIRST_MSDU_IN_MPDU_M 0x00000004
#define HTT_RX_DATA_MSDU_INFO_FIRST_MSDU_IN_MPDU_S 2
#define HTT_RX_DATA_MSDU_INFO_FIRST_MSDU_IN_MPDU_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_FIRST_MSDU_IN_MPDU, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_FIRST_MSDU_IN_MPDU_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_FIRST_MSDU_IN_MPDU_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_FIRST_MSDU_IN_MPDU_M) >> HTT_RX_DATA_MSDU_INFO_FIRST_MSDU_IN_MPDU_S)
#define HTT_RX_DATA_MSDU_INFO_LAST_MSDU_IN_MPDU_M 0x00000008
#define HTT_RX_DATA_MSDU_INFO_LAST_MSDU_IN_MPDU_S 3
#define HTT_RX_DATA_MSDU_INFO_LAST_MSDU_IN_MPDU_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_LAST_MSDU_IN_MPDU, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_LAST_MSDU_IN_MPDU_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_LAST_MSDU_IN_MPDU_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_LAST_MSDU_IN_MPDU_M) >> HTT_RX_DATA_MSDU_INFO_LAST_MSDU_IN_MPDU_S)
#define HTT_RX_DATA_MSDU_INFO_MSDU_CONTINUATION_M 0x00000010
#define HTT_RX_DATA_MSDU_INFO_MSDU_CONTINUATION_S 4
#define HTT_RX_DATA_MSDU_INFO_MSDU_CONTINUATION_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_MSDU_CONTINUATION, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_MSDU_CONTINUATION_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_MSDU_CONTINUATION_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_MSDU_CONTINUATION_M) >> HTT_RX_DATA_MSDU_INFO_MSDU_CONTINUATION_S)
#define HTT_RX_DATA_MSDU_INFO_SA_IS_VALID_M 0x00000020
#define HTT_RX_DATA_MSDU_INFO_SA_IS_VALID_S 5
#define HTT_RX_DATA_MSDU_INFO_SA_IS_VALID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_SA_IS_VALID, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_SA_IS_VALID_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_SA_IS_VALID_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_SA_IS_VALID_M) >> HTT_RX_DATA_MSDU_INFO_SA_IS_VALID_S)
#define HTT_RX_DATA_MSDU_INFO_DA_IS_VALID_M 0x00000040
#define HTT_RX_DATA_MSDU_INFO_DA_IS_VALID_S 6
#define HTT_RX_DATA_MSDU_INFO_DA_IS_VALID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_DA_IS_VALID, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_DA_IS_VALID_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_DA_IS_VALID_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_DA_IS_VALID_M) >> HTT_RX_DATA_MSDU_INFO_DA_IS_VALID_S)
#define HTT_RX_DATA_MSDU_INFO_DA_IS_MCBC_M 0x00000080
#define HTT_RX_DATA_MSDU_INFO_DA_IS_MCBC_S 7
#define HTT_RX_DATA_MSDU_INFO_DA_IS_MCBC_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_DA_IS_MCBC, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_DA_IS_MCBC_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_DA_IS_MCBC_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_DA_IS_MCBC_M) >> HTT_RX_DATA_MSDU_INFO_DA_IS_MCBC_S)
#define HTT_RX_DATA_MSDU_INFO_TID_INFO_M 0x0000FF00
#define HTT_RX_DATA_MSDU_INFO_TID_INFO_S 8
#define HTT_RX_DATA_MSDU_INFO_TID_INFO_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_TID_INFO, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_TID_INFO_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_TID_INFO_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_TID_INFO_M) >> HTT_RX_DATA_MSDU_INFO_TID_INFO_S)
#define HTT_RX_DATA_MSDU_INFO_MSDU_LENGTH_M 0x3FFF0000
#define HTT_RX_DATA_MSDU_INFO_MSDU_LENGTH_S 16
#define HTT_RX_DATA_MSDU_INFO_MSDU_LENGTH_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_MSDU_LENGTH, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_MSDU_LENGTH_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_MSDU_LENGTH_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_MSDU_LENGTH_M) >> HTT_RX_DATA_MSDU_INFO_MSDU_LENGTH_S)
#define HTT_RX_DATA_MSDU_INFO_IS_FIRST_PKT_AFTER_WKP_M 0x40000000
#define HTT_RX_DATA_MSDU_INFO_IS_FIRST_PKT_AFTER_WKP_S 30
#define HTT_RX_DATA_MSDU_INFO_IS_FIRST_PKT_AFTER_WKP_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_IS_FIRST_PKT_AFTER_WKP, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_IS_FIRST_PKT_AFTER_WKP_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_IS_FIRST_PKT_AFTER_WKP_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_IS_FIRST_PKT_AFTER_WKP_M) >> HTT_RX_DATA_MSDU_INFO_IS_FIRST_PKT_AFTER_WKP_S)
#define HTT_RX_DATA_MSDU_INFO_ERROR_VALID_M 0x00000001
#define HTT_RX_DATA_MSDU_INFO_ERROR_VALID_S 0
#define HTT_RX_DATA_MSDU_INFO_ERROR_VALID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_ERROR_VALID, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_ERROR_VALID_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_ERROR_VALID_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_ERROR_VALID_M) >> HTT_RX_DATA_MSDU_INFO_ERROR_VALID_S)
#define HTT_RX_DATA_MSDU_INFO_ERROR_INFO_M 0x0000001E
#define HTT_RX_DATA_MSDU_INFO_ERROR_INFO_S 1
#define HTT_RX_DATA_MSDU_INFO_ERROR_INFO_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_RX_DATA_MSDU_INFO_ERROR_INFO, value); \
(word) |= (value) << HTT_RX_DATA_MSDU_INFO_ERROR_INFO_S; \
} while (0)
#define HTT_RX_DATA_MSDU_INFO_ERROR_INFO_GET(word) \
(((word) & HTT_RX_DATA_MSDU_INFO_ERROR_INFO_M) >> HTT_RX_DATA_MSDU_INFO_ERROR_INFO_S)
/**
* @brief target -> Primary peer migration message to host
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_PRIMARY_LINK_PEER_MIGRATE_IND
*
* @details
* HTT_T2H_MSG_TYPE_PRIMARY_LINK_PEER_MIGRATE_IND message is sent by target
* to host to flush & set-up the RX rings to new primary peer
*
* The message would appear as follows:
*
* |31 16|15 12|11 8|7 0|
* |-------------------------------+---------+---------+--------------|
* | vdev ID | pdev ID | chip ID | msg type |
* |-------------------------------+---------+---------+--------------|
* | ML peer ID | SW peer ID |
* |-------------------------------+----------------------------------|
*
* The message is interpreted as follows:
* dword0 - b'0:7 - msg_type: This will be set to 0x37
* (HTT_T2H_MSG_TYPE_PRIMARY_LINK_PEER_MIGRATE_IND)
* b'8:11 - chip_id: Indicate which chip has been chosen as primary
* b'12:15 - pdev_id: Indicate which pdev in the chip is chosen
* as primary
* b'16:31 - vdev_id: Indicate which vdev in the pdev is chosen
* as primary
*
* dword1 - b'0:15 - sw_link_peer_id: Indicate the sw_peer_id of the peer
* chosen as primary
* b'16:31 - ml_peer_id: Indicate the ml_peer_id to which the
* primary peer belongs.
*/
typedef struct {
A_UINT32 msg_type: 8, /* bits 7:0 */
chip_id: 4, /* bits 11:8 */
pdev_id: 4, /* bits 15:12 */
vdev_id: 16; /* bits 31:16 */
A_UINT32 sw_link_peer_id: 16, /* bits 15:0 */
ml_peer_id: 16; /* bits 31:16 */
} htt_t2h_primary_link_peer_migrate_ind_t;
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_M 0x00000F00
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_S 8
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_GET(_var) \
(((_var) & HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_M) >> \
HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_S)
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID, _val); \
((_var) |= ((_val) << HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_CHIP_ID_S));\
} while (0)
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_M 0x0000F000
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_S 12
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_GET(_var) \
(((_var) & HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_M) >> \
HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_S)
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_PDEV_ID_S));\
} while (0)
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_M 0xFFFF0000
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_S 16
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_GET(_var) \
(((_var) & HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_M) >> \
HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_S)
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID, _val); \
((_var) |= ((_val) << HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_VDEV_ID_S));\
} while (0)
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_M 0x0000FFFF
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_S 0
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_GET(_var) \
(((_var) & HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_M) >> \
HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_S)
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID, _val); \
((_var) |= ((_val) << HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_SW_LINK_PEER_ID_S));\
} while (0)
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_M 0xFFFF0000
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_S 16
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_GET(_var) \
(((_var) & HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_M) >> \
HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_S)
#define HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID, _val); \
((_var) |= ((_val) << HTT_T2H_PRIMARY_LINK_PEER_MIGRATE_ML_PEER_ID_S));\
} while (0)
/**
* @brief target -> host rx peer AST override message defenition
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_PEER_AST_OVERRIDE_INDEX_IND
*
* @details
* Format inherits parts of the HTT_T2H_MSG_TYPE_PEER_MAP_V3 published above
* where in the dummy ast index is provided to the host.
* This new message below is sent to the host at run time from the TX_DE
* exception path when a SAWF flow is detected for a peer.
* This is sent up once per SAWF peer.
* This layout assumes the target operates as little-endian.
*
* |31 24|23 16|15 8|7 0|
* |--------------------------------------+-----------------+-----------------|
* | SW peer ID | vdev ID | msg type |
* |-----------------+--------------------+-----------------+-----------------|
* | MAC addr 3 | MAC addr 2 | MAC addr 1 | MAC addr 0 |
* |-----------------+--------------------+-----------------+-----------------|
* | dummy AST Index #1 | MAC addr 5 | MAC addr 4 |
* |--------------------------------------+-----------------+-----------------|
* | reserved | dummy AST Index #2 |
* |--------------------------------------+-----------------------------------|
*
* The following field definitions describe the format of the peer ast override
* index messages sent from the target to the host.
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a peer map v3 message
* Value: 0x38 (HTT_T2H_MSG_TYPE_PEER_AST_OVERRIDE_INDEX_IND)
* - VDEV_ID
* Bits 15:8
* Purpose: Indicates which virtual device the peer is associated with.
* - SW_PEER_ID
* Bits 31:16
* Purpose: The peer ID (index) that WAL has allocated for this peer.
* - MAC_ADDR_L32
* Bits 31:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: lower 4 bytes of peer node's MAC address
* - MAC_ADDR_U16
* Bits 15:0
* Purpose: Identifies which peer node the peer ID is for.
* Value: upper 2 bytes of peer node's MAC address
* - AST_INDEX1
* Bits 31:16
* Purpose: The 1st extra AST index used to identify user defined MSDUQ
* - AST_INDEX2
* Bits 15:0
* Purpose: The 2nd extra AST index used to identify user defined MSDUQ
*/
/* dword 0 */
#define HTT_PEER_AST_OVERRIDE_SW_PEER_ID_M 0xffff0000
#define HTT_PEER_AST_OVERRIDE_SW_PEER_ID_S 16
#define HTT_PEER_AST_OVERRIDE_VDEV_ID_M 0x0000ff00
#define HTT_PEER_AST_OVERRIDE_VDEV_ID_S 8
/* dword 1 */
#define HTT_PEER_AST_OVERRIDE_MAC_ADDR_L32_M 0xffffffff
#define HTT_PEER_AST_OVERRIDE_MAC_ADDR_L32_S 0
/* dword 2 */
#define HTT_PEER_AST_OVERRIDE_MAC_ADDR_U16_M 0x0000ffff
#define HTT_PEER_AST_OVERRIDE_MAC_ADDR_U16_S 0
#define HTT_PEER_AST_OVERRIDE_AST_INDEX1_M 0xffff0000
#define HTT_PEER_AST_OVERRIDE_AST_INDEX1_S 16
/* dword 3 */
#define HTT_PEER_AST_OVERRIDE_AST_INDEX2_M 0x0000ffff
#define HTT_PEER_AST_OVERRIDE_AST_INDEX2_S 0
#define HTT_PEER_AST_OVERRIDE_VDEV_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_PEER_AST_OVERRIDE_VDEV_ID, value); \
(word) |= (value) << HTT_PEER_AST_OVERRIDE_VDEV_ID_S; \
} while (0)
#define HTT_PEER_AST_OVERRIDE_VDEV_ID_GET(word) \
(((word) & HTT_PEER_AST_OVERRIDE_VDEV_ID_M) >> HTT_PEER_AST_OVERRIDE_VDEV_ID_S)
#define HTT_PEER_AST_OVERRIDE_SW_PEER_ID_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_PEER_AST_OVERRIDE_SW_PEER_ID, value); \
(word) |= (value) << HTT_PEER_AST_OVERRIDE_SW_PEER_ID_S; \
} while (0)
#define HTT_PEER_AST_OVERRIDE_SW_PEER_ID_GET(word) \
(((word) & HTT_PEER_AST_OVERRIDE_SW_PEER_ID_M) >> HTT_PEER_AST_OVERRIDE_SW_PEER_ID_S)
#define HTT_PEER_AST_OVERRIDE_MAC_ADDR_L32_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_PEER_AST_OVERRIDE_MAC_ADDR_L32, value); \
(word) |= (value) << HTT_PEER_AST_OVERRIDE_MAC_ADDR_L32_S; \
} while (0)
#define HTT_PEER_AST_OVERRIDE_MAC_ADDR_L32_GET(word) \
(((word) & HTT_PEER_AST_OVERRIDE_MAC_ADDR_L32_M) >> HTT_PEER_AST_OVERRIDE_MAC_ADDR_L32_S)
#define HTT_PEER_AST_OVERRIDE_MAC_ADDR_U16_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_PEER_AST_OVERRIDE_MAC_ADDR_U16, value); \
(word) |= (value) << HTT_PEER_AST_OVERRIDE_MAC_ADDR_U16_S; \
} while (0)
#define HTT_PEER_AST_OVERRIDE_MAC_ADDR_U16_GET(word) \
(((word) & HTT_PEER_AST_OVERRIDE_MAC_ADDR_U16_M) >> HTT_PEER_AST_OVERRIDE_MAC_ADDR_U16_S)
#define HTT_PEER_AST_OVERRIDE_AST_INDEX1_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_PEER_AST_OVERRIDE_AST_INDEX1, value); \
(word) |= (value) << HTT_PEER_AST_OVERRIDE_AST_INDEX1_S; \
} while (0)
#define HTT_PEER_AST_OVERRIDE_AST_INDEX1_GET(word) \
(((word) & HTT_PEER_AST_OVERRIDE_AST_INDEX1_M) >> HTT_PEER_AST_OVERRIDE_AST_INDEX1_S)
#define HTT_PEER_AST_OVERRIDE_AST_INDEX2_SET(word, value) \
do { \
HTT_CHECK_SET_VAL(HTT_PEER_AST_OVERRIDE_AST_INDEX2, value); \
(word) |= (value) << HTT_PEER_AST_OVERRIDE_AST_INDEX2_S; \
} while (0)
#define HTT_PEER_AST_OVERRIDE_AST_INDEX2_GET(word) \
(((word) & HTT_PEER_AST_OVERRIDE_AST_INDEX2_M) >> HTT_PEER_AST_OVERRIDE_AST_INDEX2_S)
#define HTT_PEER_AST_OVERRIDE_MAC_ADDR_WORD_BASE_OFFSET 4 /* bytes */
#define HTT_PEER_AST_OVERRIDE_DUMMY_AST1_WORD_BASE_OFFSET 8 /* bytes */
#define HTT_PEER_AST_OVERRIDE_DUMMY_AST2_WORD_BASE_OFFSET 12 /* bytes */
#define HTT_PEER_AST_OVERRIDE_INDEX_IND_BYTES 16
/**
* @brief target -> periodic report of tx latency to host
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_TX_LATENCY_STATS_PERIODIC_IND
*
* @details
* The message starts with a message header followed by one or more
* htt_t2h_peer_tx_latency_stats structs, one for each peer within the vdev.
* After each upload, these tx latency stats will be reset.
*
* |31 24|23 16|15 14|13 10|9 8|7 0|
* +-------------------------+-----+-----+---+----------|
* hdr | |pyld elem sz| | GR | P | msg type |
*- -|=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-|
* pyld | peer ID |
* |----------------------------------------------------|
* | peer_tx_latency[0] |
* |----------------------------------------------------|
* 1st | peer_tx_latency[1] |
* peer |----------------------------------------------------|
* | peer_tx_latency[2] |
* |----------------------------------------------------|
* | peer_tx_latency[3] |
* |----------------------------------------------------|
* | avg latency |
* |=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-|
* | peer ID |
* |----------------------------------------------------|
* | peer_tx_latency[0] |
* |----------------------------------------------------|
* 2nd | peer_tx_latency[1] |
* peer |----------------------------------------------------|
* | peer_tx_latency[2] |
* |----------------------------------------------------|
* | peer_tx_latency[3] |
* |----------------------------------------------------|
* | avg latency |
* |=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-|
* Where:
* P = pdev ID
* GR = granularity
*
* @details
* htt_t2h_tx_latency_stats_periodic_hdr_t:
* - msg_type
* Bits 7:0
* Purpose: identifies this as a tx latency report message
* Value: 0x3a (HTT_T2H_MSG_TYPE_TX_LATENCY_STATS_PERIODIC_IND)
* - pdev_id
* Bits 9:8
* Purpose: Indicates which pdev this message is associated with.
* - granularity
* Bits 13:10
* Purpose: specifies the granulairty of each tx latency bucket in MS.
* There are 4 buckets in total. E.g. if granularity is set to 5 ms,
* then the ranges for the 4 latency histogram buckets will be
* 0-5ms, 5ms-10ms, 10ms-15ms, 15ms-max, respectively.
* - payload_elem_size
* Bits 23:16
* Purpose: specifies the size of each element within the msg's payload
* In other words, this field specified the value of
* sizeof(htt_t2h_peer_tx_latency_stats) based on the target's
* revision of the htt_t2h_peer_tx_latency_stats definition.
* If the payload_elem_size reported in the message exceeds the
* sizeof(htt_t2h_peer_tx_latency_stats) based on the host's
* revision of the htt_t2h_peer_tx_latency_stats definition,
* the host shall ignore the excess data.
* Conversely, if the payload_elem_size reported in the message is
* less than sizeof(htt_t2h_peer_tx_latency_stats) based on the host's
* revision of the htt_t2h_peer_tx_latency_stats definition,
* the host shall use 0x0 values for the portion of the data not
* provided by the target.
* The host can compare the payload_elem_size to the total size of
* the message minus the size of the message header to determine
* how many peer payload elements are present in the message.
* - sw_peer_id
* Purpose: The peer to which the following stats belong
* - peer_tx_latency
* Purpose: tx latency histogram for this peer, with 4 buckets whose
* size (in milliseconds) is specified by the granularity field
* - avg_latency
* Purpose: average tx latency (in ms) for this peer in this report interval
*/
typedef struct {
A_UINT32 msg_type: 8,
pdev_id: 2,
granularity: 4,
reserved1: 2,
payload_elem_size: 8,
reserved2: 8;
} htt_t2h_tx_latency_stats_periodic_hdr_t;
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_HDR_SIZE \
(sizeof(htt_t2h_tx_latency_stats_periodic_hdr_t))
#define HTT_PEER_TX_LATENCY_REPORT_BINS 4
typedef struct _htt_tx_latency_stats {
A_UINT32 peer_id;
A_UINT32 peer_tx_latency[HTT_PEER_TX_LATENCY_REPORT_BINS];
A_UINT32 avg_latency;
} htt_t2h_peer_tx_latency_stats;
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PDEV_ID_M 0x00000300
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PDEV_ID_S 8
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PDEV_ID_GET(_var) \
(((_var) & HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PDEV_ID_M) >> HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PDEV_ID_S)
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PDEV_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PDEV_ID, _val); \
((_var) |= ((_val) << HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PDEV_ID_S)); \
} while (0)
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_GRANULARITY_M 0x00003C00
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_GRANULARITY_S 10
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_GRANULARITY_GET(_var) \
(((_var) & HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_GRANULARITY_M) >> HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_GRANULARITY_S)
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_GRANULARITY_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_GRANULARITY, _val); \
((_var) |= ((_val) << HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_GRANULARITY_S)); \
} while (0)
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PAYLOAD_ELEM_SIZE_M 0x00FF0000
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PAYLOAD_ELEM_SIZE_S 16
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PAYLOAD_ELEM_SIZE_GET(_var) \
(((_var) & HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PAYLOAD_ELEM_SIZE_M) >> HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PAYLOAD_ELEM_SIZE_S)
#define HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PAYLOAD_ELEM_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PAYLOAD_ELEM_SIZE, _val); \
((_var) |= ((_val) << HTT_T2H_TX_LATENCY_STATS_PERIODIC_IND_PAYLOAD_ELEM_SIZE_S)); \
} while (0)
/**
* @brief target -> host report showing MSDU queue configuration
*
* MSG_TYPE => HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND
*
* @details
*
* |31 24|23 16|15|14 11|10|9 8|7 0|
* |----------------+----------------+--+-----+--+---+----------------------|
* | peer_id | htt_qtype | msg type |
* |----------------+----------------+--+-----+--+---+----------+-----------|
* | error_code | svc_class_id | R| AST | F|WHO| hlos_tid | remap_tid |
* |----------------+----------------+--+-----+--+---+----------+-----------|
* | request_cookie | tgt_opaque_msduq_id |
* |------------------------------------------------------------------------|
* Where WHO = who_classify_info_sel
* F = flow_override
* AST = ast_list_idx
* R = reserved
*
* @details
* htt_t2h_msg_type_sdwf_msduq_cfg_ind_t:
*
* The message is interpreted as follows:
* dword0 - b'7:0 - msg_type: Identifies this as a MSDU queue cfg indication
* This will be set to 0x3c
* (HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND)
* b'15:8 - HTT qtype (refer to HTT_MSDU_QTYPE)
* b'31:16 - peer ID
*
* dword1 - b'3:0 - remap TID, as assigned in firmware
* b'7:4 - HLOS TID, as sent by host in TCL Data Command
* hlos_tid : Common to Lithium and Beryllium
* b'9:8 - who_classify_info_sel (WWHO, as sent by host in
* TCL Data Command : Beryllium
* b'10:10 - flow_override (F), as sent by host in
* TCL Data Command: Beryllium
* b'14:11 - ast_list_idx (AST)
* Array index into the list of extension AST entries
* (not the actual AST 16-bit index).
* The ast_list_idx is one-based, with the following
* range of values:
* - legacy targets supporting 16 user-defined
* MSDU queues: 1-2
* - legacy targets supporting 48 user-defined
* MSDU queues: 1-6
* - new targets: 0 (peer_id is used instead)
* Note that since ast_list_idx is one-based,
* the host will need to subtract 1 to use it as an
* index into a list of extension AST entries.
* b'15:15 - reserved
* b'23:16 - svc_class_id
* b'31:24 - error_code
*
* dword2 - b'23:0 - tgt_opaque_msduq_id: tx flow number that uniquely
* identifies the MSDU queue
* b'24:31 - request_cookie: Identifies which H2T SDWF_MSDUQ_RECFG_REQ
* request triggered this indication.
* This will be set to HTT_MSDUQ_CFG_REG_COOKIE_INVALID
* (0xFF) in any cases when the FW generates this
* indication autonomously rather than in response to
* a SDWF_MSDUQ_RECFG_REQ message from the host.
*
* The behavior of this indication is as follows:
* - svc_class_id is set to the service class that the specified MSDUQ is
* currently linked to.
* - error_code is set to a defined code if any errors arise.
* Otherwise a value of 0x00 (ERROR_NONE) indicates success.
*/
/* HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND */
typedef enum {
HTT_SDWF_MSDUQ_CFG_IND_ERROR_NONE = 0x00,
HTT_SDWF_MSDUQ_CFG_IND_ERROR_PEER_DELETE_IN_PROG = 0x01,
HTT_SDWF_MSDUQ_CFG_IND_ERROR_SW_MSDUQ_NULL = 0x02,
HTT_SDWF_MSDUQ_CFG_IND_ERROR_MSDUQ_LOCATE_ERROR = 0x03,
HTT_SDWF_MSDUQ_CFG_IND_ERROR_QPEER_NULL = 0x04,
HTT_SDWF_MSDUQ_CFG_IND_ERROR_DEACTIVATED_MSDUQ = 0x05,
HTT_SDWF_MSDUQ_CFG_IND_ERROR_REACTIVATED_MSDUQ = 0x06,
HTT_SDWF_MSDUQ_CFG_IND_ERROR_INVALID_SVC_CLASS = 0x07,
HTT_SDWF_MSDUQ_CFG_IND_ERROR_TIDQ_LOCATE_ERROR = 0x08,
} HTT_SDWF_MSDUQ_CFG_IND_ERROR_CODE_E;
PREPACK struct htt_t2h_sdwf_msduq_cfg_ind {
A_UINT32 msg_type: 8, /* bits 7:0 */
htt_qtype: 8, /* bits 15:8 */
peer_id: 16; /* bits 31:16 */
A_UINT32 remap_tid: 4, /* bits 3:0 */
hlos_tid: 4, /* bits 7:4 */
who_classify_info_sel: 2, /* bits 9:8 */
flow_override: 1, /* bits 10:10 */
ast_list_idx: 4, /* bits 14:11 */
reserved: 1, /* bits 15:15 */
svc_class_id: 8, /* bits 23:16 */
error_code: 8; /* bits 31:24 */
A_UINT32 tgt_opaque_msduq_id: 24, /* bits 23:0 */
request_cookie: 8; /* bits 31:24 */
} POSTPACK;
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HTT_QTYPE_M 0x0000FF00
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HTT_QTYPE_S 8
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HTT_QTYPE_GET(_var) \
(((_var) & HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HTT_QTYPE_M) >> \
HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HTT_QTYPE_S)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HTT_QTYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HTT_QTYPE, _val); \
((_var) |= ((_val) << HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HTT_QTYPE_S)); \
} while (0)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_PEER_ID_M 0xFFFF0000
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_PEER_ID_S 16
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_PEER_ID_GET(_var) \
(((_var) & HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_PEER_ID_M) >> \
HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_PEER_ID_S)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_PEER_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_PEER_ID, _val); \
((_var) |= ((_val) << HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_PEER_ID_S)); \
} while (0)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REMAP_TID_M 0x0000000F
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REMAP_TID_S 0
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REMAP_TID_GET(_var) \
(((_var) & HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REMAP_TID_M) >> \
HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REMAP_TID_S)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REMAP_TID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REMAP_TID, _val); \
((_var) |= ((_val) << HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REMAP_TID_S)); \
} while (0)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HLOS_TID_M 0x000000F0
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HLOS_TID_S 4
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HLOS_TID_GET(_var) \
(((_var) & HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HLOS_TID_M) >> \
HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HLOS_TID_S)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HLOS_TID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HLOS_TID, _val); \
((_var) |= ((_val) << HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_HLOS_TID_S)); \
} while (0)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_WHO_CLASSIFY_INFO_M 0x00000300
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_WHO_CLASSIFY_INFO_S 8
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_WHO_CLASSIFY_INFO_GET(_var) \
(((_var) & HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_WHO_CLASSIFY_INFO_M) >> \
HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_WHO_CLASSIFY_INFO_S)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_WHO_CLASSIFY_INFO_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_WHO_CLASSIFY_INFO, _val); \
((_var) |= ((_val) << HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_WHO_CLASSIFY_INFO_S)); \
} while (0)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_FLOW_OVERRIDE_M 0x00000400
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_FLOW_OVERRIDE_S 10
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_FLOW_OVERRIDE_GET(_var) \
(((_var) & HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_FLOW_OVERRIDE_M) >> \
HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_FLOW_OVERRIDE_S)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_FLOW_OVERRIDE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_FLOW_OVERRIDE, _val); \
((_var) |= ((_val) << HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_FLOW_OVERRIDE_S)); \
} while (0)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_AST_LIST_IDX_M 0x00007800
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_AST_LIST_IDX_S 11
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_AST_LIST_IDX_GET(_var) \
(((_var) & HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_AST_LIST_IDX_M) >> \
HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_AST_LIST_IDX_S)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_AST_LIST_IDX_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_AST_LIST_IDX, _val); \
((_var) |= ((_val) << HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_AST_LIST_IDX_S)); \
} while (0)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_SVC_CLASS_ID_M 0x00FF0000
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_SVC_CLASS_ID_S 16
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_SVC_CLASS_ID_GET(_var) \
(((_var) & HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_SVC_CLASS_ID_M) >> \
HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_SVC_CLASS_ID_S)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_SVC_CLASS_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_SVC_CLASS_ID, _val); \
((_var) |= ((_val) << HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_SVC_CLASS_ID_S)); \
} while (0)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_ERROR_CODE_M 0xFF000000
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_ERROR_CODE_S 24
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_ERROR_CODE_GET(_var) \
(((_var) & HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_ERROR_CODE_M) >> \
HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_ERROR_CODE_S)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_ERROR_CODE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_ERROR_CODE, _val); \
((_var) |= ((_val) << HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_ERROR_CODE_S)); \
} while (0)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_TGT_OPAQUE_MSDUQ_ID_M 0x00FFFFFF
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_TGT_OPAQUE_MSDUQ_ID_S 0
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_TGT_OPAQUE_MSDUQ_ID_GET(_var) \
(((_var) & HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_TGT_OPAQUE_MSDUQ_ID_M) >> \
HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_TGT_OPAQUE_MSDUQ_ID_S)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_TGT_OPAQUE_MSDUQ_ID_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_TGT_OPAQUE_MSDUQ_ID, _val); \
((_var) |= ((_val) << HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_TGT_OPAQUE_MSDUQ_ID_S)); \
} while (0)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REQUEST_COOKIE_M 0xFF000000
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REQUEST_COOKIE_S 24
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REQUEST_COOKIE_GET(_var) \
(((_var) & HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REQUEST_COOKIE_M) >> \
HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REQUEST_COOKIE_S)
#define HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REQUEST_COOKIE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REQUEST_COOKIE, _val); \
((_var) |= ((_val) << HTT_T2H_MSG_TYPE_SDWF_MSDUQ_CFG_IND_REQUEST_COOKIE_S)); \
} while (0)
#endif