/* * Copyright (c) 2012-2020 The Linux Foundation. All rights reserved. * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for * any purpose with or without fee is hereby granted, provided that the * above copyright notice and this permission notice appear in all * copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR * PERFORMANCE OF THIS SOFTWARE. */ /** * DOC: This file contains centralized definitions of converged configuration. */ #ifndef __CFG_MLME_RATES_H #define __CFG_MLME_RATES_H #define CFG_SUPPORTED_RATES_11B_LEN 4 #define CFG_SUPPORTED_RATES_11A_LEN 8 #define CFG_OPERATIONAL_RATE_SET_LEN 12 #define CFG_EXTENDED_OPERATIONAL_RATE_SET_LEN 8 #define CFG_SUPPORTED_MCS_SET_LEN 16 #define CFG_BASIC_MCS_SET_LEN 16 #define CFG_CURRENT_MCS_SET_LEN 16 #define CFG_MLME_RATE_MASK_LEN 4 /* * * gMaxHTMCSForTxData - max HT mcs for TX * @Min: 0 * @Max: 383 * @Default: 0 * * This ini is used to configure the max HT mcs * for tx data. * * Usage: External * * bits 0-15: max HT mcs * bits 16-31: zero to disable, otherwise enable. * * */ #define CFG_MAX_HT_MCS_FOR_TX_DATA CFG_INI_UINT( \ "gMaxHTMCSForTxData", \ 0, \ 0x17f, \ 0, \ CFG_VALUE_OR_DEFAULT, \ "Max HT Mcs for Tx Data") /* * * gDisableABGRateForTxData - disable abg rate for tx data * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to disable abg rate for tx data. * * Usage: External * * */ #define CFG_DISABLE_ABG_RATE_FOR_TX_DATA CFG_INI_BOOL( \ "gDisableABGRateForTxData", \ 0, \ "Disable ABG RATE for TX Data") /* * * gSapMaxMCSForTxData - sap 11n max mcs * @Min: 0 * @Max: 383 * @Default: 0 * * This ini configure SAP 11n max mcs * * Usage: External * * */ #define CFG_SAP_MAX_MCS_FOR_TX_DATA CFG_INI_UINT( \ "gSapMaxMCSForTxData", \ 0, \ 383, \ 0, \ CFG_VALUE_OR_DEFAULT, \ "SAP Max MCS for TX Data") /* * * disable_high_ht_mcs_2x2 - disable high mcs index for 2nd stream in 2.4G * @Min: 0 * @Max: 8 * @Default: 0 * * This ini is used to disable high HT MCS index for 2.4G STA connection. * It has been introduced to resolve IOT issue with one of the vendor. * * Note: This INI is not useful with 1x1 setting. If some platform supports * only 1x1 then this INI is not useful. * * 0 - It won't disable any HT MCS index (just like normal HT MCS) * 1 - It will disable 15th bit from HT RX MCS set (from 8-15 bits slot) * 2 - It will disable 14th & 15th bits from HT RX MCS set * 3 - It will disable 13th, 14th, & 15th bits from HT RX MCS set * and so on. * * Related: STA * * Supported Feature: 11n * * Usage: External */ #define CFG_DISABLE_HIGH_HT_RX_MCS_2x2 CFG_INI_UINT( \ "disable_high_ht_mcs_2x2", \ 0, \ 8, \ 0, \ CFG_VALUE_OR_DEFAULT, \ "Disable high MCS index for 2x2") #define CFG_CFP_PERIOD CFG_UINT( \ "cfpPeriod", \ 0, \ 255, \ 1, \ CFG_VALUE_OR_DEFAULT, \ "CFP Period") #define CFG_CFP_MAX_DURATION CFG_UINT( \ "cfpMaxDuration", \ 0, \ 65535, \ 30000, \ CFG_VALUE_OR_DEFAULT, \ "CFP Max Duration") /* * * supported_rates_11b - supported rates for 11b * @Min: 0 minimum length of supported rates * @Max: default data length of supported rates in string format * @Default: 2, 4, 11, 22 */ #define CFG_SUPPORTED_RATES_11B_DATA "2, 4, 11, 22" #define CFG_SUPPORTED_RATES_11B CFG_STRING( \ "supported_rates_11b", \ 0, \ sizeof(CFG_SUPPORTED_RATES_11B_DATA) - 1, \ CFG_SUPPORTED_RATES_11B_DATA, \ "Supported rates for 11B") /* * * supported_rates_11a - supported rates for 11a * @Min: 0 minimum length of supported rates * @Max: default data length of supported rates in string format * @Default: 12, 18, 24, 36, 48, 72, 96, 108 */ #define CFG_SUPPORTED_RATES_11A_DATA "12, 18, 24, 36, 48, 72, 96, 108" #define CFG_SUPPORTED_RATES_11A CFG_STRING( \ "supported_rates_11a", \ 0, \ sizeof(CFG_SUPPORTED_RATES_11A_DATA) - 1, \ CFG_SUPPORTED_RATES_11A_DATA, \ "Supported rates for 11A") /* * * supported_mcs_set - supported MCS set data * @Min: 0 minimum length of supported MCS set * @Max: default data length of supported mcs set in string format * @Default: 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, * 0x0, 0x0, 0x0 */ #define CFG_SUPPORTED_MCS_SET_DATA "0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0" #define CFG_SUPPORTED_MCS_SET CFG_STRING( \ "supported_mcs_set", \ 0, \ sizeof(CFG_SUPPORTED_MCS_SET_DATA) - 1, \ CFG_SUPPORTED_MCS_SET_DATA, \ "supported MCS set") /* * * basic_mcs_set - basic MCS set data * @Min: 0 minimum length of basic MCS set * @Max: default data length of basic mcs set in string format * @Default: 0x00, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, * 0x0, 0x0, 0x0 */ #define CFG_BASIC_MCS_SET_DATA "0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0" #define CFG_BASIC_MCS_SET CFG_STRING( \ "basic_mcs_set", \ 0, \ sizeof(CFG_BASIC_MCS_SET_DATA) - 1, \ CFG_BASIC_MCS_SET_DATA, \ "basic MCS set") /* * * current_mcs_set - current MCS set data * @Min: 0 minimum length of current MCS set * @Max: default data length of current mcs set in string format * @Default: 0x00, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, * 0x0, 0x0, 0x0 */ #define CFG_CURRENT_MCS_SET_DATA "0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0" #define CFG_CURRENT_MCS_SET CFG_STRING( \ "current_mcs_set", \ 0, \ sizeof(CFG_CURRENT_MCS_SET_DATA) - 1, \ CFG_CURRENT_MCS_SET_DATA, \ "current MCS set") /* * * ratemask_type - PHY type for the ratemask. * @Min: 0 No rate mask set defined - disabled the configuration * @Max: 4 * @Default: 0 * * This ini is used to set the PHY type for ratemask in rate selection. * * 0 = Disables the configuration * 1 = The rate mask specified is for CCK/OFDM configuration * 2 = The rate mask specified is for HT configuration * 3 = The rate mask specified is for VHT configuration * 4 = The rate mask specified is for HE/11ax configuration * * Related: CFG_RATEMASK_SET * * Usage: External */ #define CFG_RATEMASK_TYPE CFG_INI_UINT( \ "ratemask_type", \ 0, \ 4, \ 0, \ CFG_VALUE_OR_DEFAULT, \ "Ratemask type") /* * * ratemask_set - ratemasks for a PHY type used in rate selection * @Min: default data length of ratemask in string format * @Max: default data length of ratemask in string format * @Default: 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, 0xFFFFFFFF * * This is used to set the rate mask value to be used in rate selection. * Each of the four words must be configured. * A bit value of 1 represents rate is enabled * A bit value of 0 represents rate is disabled * * [b31-b0],[b63-b32],[b95-b64],[b127-b96] * For HE targets, 12 bits correpond to one NSS setting. Ex: * b0-13 => NSS1, MCS 0-13 * b14-27 => NSS2, MCS 0-13 and so on for other NSS. * Note that the bit representation is continuous. * * For VHT targets, 12 bits correspond to one NSS setting. * b0-11 => NSS1, MCS 0-11 * b12-23 => NSS2, MCS 0-11 and so on for other NSS. * * For HT targets, 8 bits correspond to one NSS setting. * b0-7 => NSS1, MCS 0-7 * b8-15 => NSS2, MCS 0-7 and so on for other NSS. * * For OFDM/CCK targets, 8 bits correspond to one NSS setting. * Bit position |-b3-|-b2-|-b1-|-b0-| * Rates in Mbps |-1 -|-2 -|-5.5|-11-| CCK Rates * * Bit position |-b11-|-b10-|-b09-|-b08-|-b07-|-b06-|-b05-|-b04-| * Rates in Mbps |- 9 -|- 18-|-36 -|-54 -|- 6 -|-12 -| -24-|-48- | OFDM Rates * * Related: CFG_RATEMASK_TYPE * * Usage: External */ #define CFG_RATEMASK_DATA "0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF" #define CFG_RATEMASK_SET CFG_INI_STRING( \ "ratemask_set", \ 0, \ sizeof(CFG_RATEMASK_DATA) - 1, \ CFG_RATEMASK_DATA, \ "Ratemasks for rate selection") #define CFG_RATES_ALL \ CFG(CFG_MAX_HT_MCS_FOR_TX_DATA) \ CFG(CFG_DISABLE_ABG_RATE_FOR_TX_DATA) \ CFG(CFG_SAP_MAX_MCS_FOR_TX_DATA) \ CFG(CFG_DISABLE_HIGH_HT_RX_MCS_2x2) \ CFG(CFG_CFP_PERIOD) \ CFG(CFG_CFP_MAX_DURATION) \ CFG(CFG_SUPPORTED_RATES_11B) \ CFG(CFG_SUPPORTED_RATES_11A) \ CFG(CFG_SUPPORTED_MCS_SET) \ CFG(CFG_BASIC_MCS_SET) \ CFG(CFG_CURRENT_MCS_SET) \ CFG(CFG_RATEMASK_TYPE) \ CFG(CFG_RATEMASK_SET) #endif /* __CFG_MLME_RATES_H */