/*
* Copyright (c) 2012-2019 The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
/**
* DOC: This file contains centralized definitions of SCAN component
*/
#ifndef __CONFIG_SCAN_H
#define __CONFIG_SCAN_H
#include "cfg_define.h"
/*
*
* drop_bcn_on_chan_mismatch - drop the beacon for chan mismatch
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to decide drop the beacon or not if channel received
* in metadata doesn't match the one in beacon.
*
* Related: None
*
* Usage: External
*
*
*/
#define CFG_DROP_BCN_ON_CHANNEL_MISMATCH CFG_INI_BOOL(\
"drop_bcn_on_chan_mismatch",\
true,\
"drop bcn on channel mismatch")
/*
*
* gActiveMaxChannelTime - Set max channel time for active scan
* @Min: 0
* @Max: 10000
* @Default: 40
*
* This ini is used to set maximum channel time in msecs spent in
* active scan
*
* Related: None
*
* Usage: External
*
*
*/
#define CFG_ACTIVE_MAX_CHANNEL_TIME CFG_INI_UINT(\
"gActiveMaxChannelTime",\
0, 10000, MCL_OR_WIN_VALUE(40, 105),\
CFG_VALUE_OR_DEFAULT, "active dwell time")
/*
*
* gEnableDFSChnlScan - Enable/Disable scan on DFS channels
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to enable/disable scan on DFS channels.
*
* Related: Scan
*
* Usage: External
*
*
*/
#define CFG_ENABLE_DFS_SCAN CFG_INI_BOOL( \
"gEnableDFSChnlScan", \
true, \
"enable dfs scan")
/*
*
* gInitialScanNoDFSChnl - Exclude DFS channels in first scan
* @Min: 0
* @Max: 1
* @Default: 0
*
* This ini is used to enable/disable scan on DFS channels, in first scan only
*
* Related: Scan
*
* Usage: External
*
*
*/
#define CFG_INITIAL_NO_DFS_SCAN CFG_INI_BOOL( \
"gInitialScanNoDFSChnl", \
false, \
"disable initial dfs scan")
/*
*
* active_max_channel_time_2g - Set max time for active 2G channel scan
* @Min: 0
* @Max: 10000
* @Default: 80
*
* This ini is used to set maximum time in msecs spent in active 2G channel scan
* if it's not zero, in case of zero, CFG_ACTIVE_MAX_CHANNEL_TIME is used for 2G
* channels also.
*
* Related: None
*
* Usage: External
*
*
*/
#define CFG_ACTIVE_MAX_2G_CHANNEL_TIME CFG_INI_UINT(\
"active_max_channel_time_2g",\
0, 10000, MCL_OR_WIN_VALUE(80, 0),\
CFG_VALUE_OR_DEFAULT, "active dwell time for 2G channels")
/*
*
* gPassiveMaxChannelTime - Set max channel time for passive scan
* @Min: 0
* @Max: 10000
* @Default: 110
*
* This ini is used to set maximum channel time in msecs spent in
* passive scan
*
* Related: None
*
* Usage: External
*
*
*/
#define CFG_PASSIVE_MAX_CHANNEL_TIME CFG_INI_UINT(\
"gPassiveMaxChannelTime",\
0, 10000, MCL_OR_WIN_VALUE(110, 300),\
CFG_VALUE_OR_DEFAULT, "passive dwell time")
/*
*
* gScanNumProbes - Set the number of probes on each channel for active scan
* @Min: 0
* @Max: 20
* @Default: 0
*
* This ini is used to set number of probes on each channel for
* active scan
*/
#define CFG_SCAN_NUM_PROBES CFG_INI_UINT(\
"gScanNumProbes",\
0, 20, MCL_OR_WIN_VALUE(0, 2),\
CFG_VALUE_OR_DEFAULT,\
"number of probes on each channel")
/*
*
* gScanProbeRepeatTime - Set the probe repeat time on each channel
* @Min: 0
* @Max: 30
* @Default: 0
*
* This ini is used to set probe repeat time on each channel for
* active scan
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: External
*
*
*/
#define CFG_SCAN_PROBE_REPEAT_TIME CFG_INI_UINT(\
"gScanProbeRepeatTime",\
0, 30, MCL_OR_WIN_VALUE(20, 50),\
CFG_VALUE_OR_DEFAULT,\
"probe repeat time on each channel")
/*
*
* hostscan_adaptive_dwell_mode - Enable adaptive dwell mode
* during host scan with conneciton
* @Min: 0
* @Max: 4
* @Default: 2
*
* This ini will set the algo used in dwell time optimization
* during host scan with connection.
* See enum wmi_dwelltime_adaptive_mode.
* Acceptable values for this:
* 0: Default (Use firmware default mode)
* 1: Conservative optimization
* 2: Moderate optimization
* 3: Aggressive optimization
* 4: Static
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: External
*
*
*/
#define CFG_ADAPTIVE_SCAN_DWELL_MODE CFG_INI_UINT(\
"hostscan_adaptive_dwell_mode",\
0, 4, MCL_OR_WIN_VALUE(2, 0),\
CFG_VALUE_OR_DEFAULT,\
"Enable adaptive dwell mode")
/*
*
* hostscan_adaptive_dwell_mode_no_conn - Enable adaptive dwell mode
* during host scan without conneciton
* @Min: 0
* @Max: 4
* @Default: 4
*
* This ini will set the algo used in dwell time optimization
* during host scan with connection.
* See enum wmi_dwelltime_adaptive_mode.
* Acceptable values for this:
* 0: Default (Use firmware default mode)
* 1: Conservative optimization
* 2: Moderate optimization
* 3: Aggressive optimization
* 4: Static
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: External
*
*
*/
#define CFG_ADAPTIVE_SCAN_DWELL_MODE_NC CFG_INI_UINT(\
"hostscan_adaptive_dwell_mode_no_conn",\
0, 4, MCL_OR_WIN_VALUE(4, 0),\
CFG_VALUE_OR_DEFAULT,\
"Enable adaptive dwell mode without connection")
/*
*
* honour_nl_scan_policy_flags - This ini will decide whether to honour
* NL80211 scan policy flags
* @Min: 0
* @Max: 1
* @Default: 1
*
* This parameter will decide whether to honour scan flags such as
* NL80211_SCAN_FLAG_HIGH_ACCURACY , NL80211_SCAN_FLAG_LOW_SPAN,
* NL80211_SCAN_FLAG_LOW_POWER.
* Acceptable values for this:
* 0: Config is disabled
* 1: Config is enabled
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: Internal
*
*
*/
#define CFG_HONOUR_NL_SCAN_POLICY_FLAGS CFG_INI_BOOL(\
"honour_nl_scan_policy_flags",\
true, \
"honour NL80211 scan policy flags")
/*
*
* is_bssid_hint_priority - Set priority for connection with bssid_hint
* BSSID.
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to give priority to BSS for connection which comes
* as part of bssid_hint
*
* Related: None
*
* Supported Feature: STA
*
* Usage: External
*
*
*/
#define CFG_IS_BSSID_HINT_PRIORITY CFG_INI_UINT(\
"is_bssid_hint_priority",\
0, 1, 0,\
CFG_VALUE_OR_DEFAULT, \
"Set priority for connection with bssid_hint")
#ifdef FEATURE_WLAN_SCAN_PNO
/*
*
* g_max_sched_scan_plan_iterations - pno sched max scan plan iterations.
* @Min: 1
* @Max: 100
* @Default: 10
*
* This ini is used to set max sched scan plan iterations for pno scan
* (value in seconds).
*
* Related: gPNOScanSupport
*
* Supported Feature: PNO scan
*
* Usage: External
*
*
*/
#define CFG_MAX_SCHED_SCAN_PLAN_ITERATIONS CFG_INI_UINT( \
"g_max_sched_scan_plan_iterations", \
1, 100, 10, \
CFG_VALUE_OR_DEFAULT, \
"Max sched scan plan iterations")
/*
*
* g_max_sched_scan_plan_int - pno sched max scan plan interval.
* @Min: 1
* @Max: 7200
* @Default: 3600
*
* This ini is used to set max sched scan plan interval for pno scan
* (value in seconds).
*
* Related: gPNOScanSupport
*
* Supported Feature: PNO scan
*
* Usage: External
*
*
*/
#define CFG_MAX_SCHED_SCAN_PLAN_INTERVAL CFG_INI_UINT( \
"g_max_sched_scan_plan_int", \
1, 7200, 3600, \
CFG_VALUE_OR_DEFAULT, \
"Max sched scan plan interval")
/*
*
* gEnableDFSPnoChnlScan - enable dfs channels in PNO scan
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to enable/disable dfs channels in PNO scan request,
* enabling this ini enables driver to include dfs channels in its
* PNO scan request
* Related: NA
*
* Supported Feature: DFS, PNO
*
* Usage: Internal/External
*
*
*/
#define CFG_ENABLE_DFS_PNO_CHNL_SCAN CFG_INI_BOOL( \
"gEnableDFSPnoChnlScan", \
true, \
"Enable dfs channels in PNO Scan")
/*
*
* gPNOScanSupport - Enable or Disable PNO scan
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to Enable or Disable PNO scan
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: External
*
*
*/
#define CFG_PNO_SCAN_SUPPORT CFG_INI_BOOL( \
"gPNOScanSupport", \
true, \
"Enable/Disable PNO scan")
/*
*
* gPNOScanTimerRepeatValue - Set PNO scan timer repeat value
* @Min: 0
* @Max: 0xffffffff
* @Default: 30
*
* This ini is used by firmware to set fast scan max cycles
* equal to gPNOScanTimerRepeatValue. Taking power consumption
* into account firmware after gPNOScanTimerRepeatValue times
* fast_scan_period switches to slow_scan_period.
*
* Usage: External
*
*
*/
#define CFG_PNO_SCAN_TIMER_REPEAT_VALUE CFG_INI_UINT( \
"gPNOScanTimerRepeatValue", \
0, \
0xffffffff, \
30, \
CFG_VALUE_OR_DEFAULT, \
"PNO scan timer repeat value")
/*
*
* gPNOSlowScanMultiplier - Set PNO slow scan multiplier
* @Min: 0
* @Max: 30
* @Default: 6
*
* This ini is used by firmware to set slow scan period
* as gPNOSlowScanMultiplier times fast_scan_period.
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: External
*
*
*/
#define CFG_PNO_SLOW_SCAN_MULTIPLIER CFG_INI_UINT( \
"gPNOSlowScanMultiplier", \
0, \
30, \
6, \
CFG_VALUE_OR_DEFAULT, \
"PNO slow scan multiplier")
/*
*
* gPNOChannelPrediction - Enable/disable the PNO channel
* prediction feature.
* @Min: 0
* @Max: 1
* @Default: 0
*
* In current PNO implementation, scan is always done until all configured
* channels are scanned. If we can determine DUT is stationary based on
* scanning a subset of channels, we may cancel the remaining channels.
* Hence, we can save additional power consumption.
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: External
*
*
*/
#define CFG_PNO_CHANNEL_PREDICTION CFG_INI_BOOL( \
"gPNOChannelPrediction", \
false, \
"enable/disable PNO channel prediction feature")
/*
*
* gTopKNumOfChannels - top K number of channels are used for tanimoto distance
* @Min: 1
* @Max: 5
* @Default: 3
*
* These are the top channels on which the probability of finding the AP's is
* extremely high. This number is intended for tweaking the internal algorithm
* for experiments. This should not be changed externally.
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: External
*
*
*/
#define CFG_TOP_K_NUM_OF_CHANNELS CFG_INI_UINT( \
"gTopKNumOfChannels", \
1, \
5, \
3, \
CFG_VALUE_OR_DEFAULT, \
"Top K number of channels")
/*
*
* gStationaryThreshold - STA threshold value to determine if it is stationary
* @Min: 0
* @Max: 100
* @Default: 10
*
* This is the threshold value to determine that the STA is
* stationary. If the tanimoto distance is less than this
* value, then the device is considered to be stationary.
* This parameter is intended to tweak the internal algorithm
* for experiments. This should not be changed externally.
*
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: External
*
*
*/
#define CFG_STATIONARY_THRESHOLD CFG_INI_UINT( \
"gStationaryThreshold", \
0, \
100, \
10, \
CFG_VALUE_OR_DEFAULT, \
"Threshold to determine if sta is stationary")
/*
*
* gChPredictionFullScanMs - Set periodic timer for channel prediction
* @Min: 3000
* @Max: 0x7fffffff
* @Default: 60000
*
* This ini is used to set the periodic timer upon which
* a full scan needs to be triggered when PNO channel
* prediction feature is enabled. This parameter is intended
* to tweak the internal algortihm for experiments.
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: Internal
*
*
*/
#define CFG_CHANNEL_PREDICTION_SCAN_TIMER CFG_INI_UINT( \
"gChPredictionFullScanMs", \
3000, \
0x7fffffff, \
60000, \
CFG_VALUE_OR_DEFAULT, \
"Timer value for channel prediction")
/*
*
* pnoscan_adaptive_dwell_mode - Enable adaptive dwell mode
* during pno scan
* @Min: 0
* @Max: 4
* @Default: 1
*
* This ini will set the algo used in dwell time optimization
* during pno scan. see enum scan_dwelltime_adaptive_mode.
* Acceptable values for this:
* 0: Default (Use firmware default mode)
* 1: Conservative optimization
* 2: Moderate optimization
* 3: Aggressive optimization
* 4: Static
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: External
*
*
*/
#define CFG_ADAPTIVE_PNOSCAN_DWELL_MODE CFG_INI_UINT( \
"pnoscan_adaptive_dwell_mode", \
0, \
4, \
1, \
CFG_VALUE_OR_DEFAULT, \
"Algorithm used in dwell time optimization")
/*
*
* gScanBackoffMultiplier - For NLO/PNO, multiply fast scan period by this every
* max cycles
* @Min: 0
* @Max: 255
* @Default: 0
*
* For Network Listen Offload and Perfered Network Offload, multiply the fast
* scan period by this value after max cycles have occurred. Setting this to 0
* disables the feature.
*
* @E.g.
* # Disable scan backoff multiplier
* gScanBackoffMultiplier=0
* # Effectively the same
* gScanBackoffMultiplier=1
* # Double the scan period after each max cycles have occurred
* gScanBackoffMultiplier=2
*
* Related: NLO, PNO
*
* Usage: Internal/External
*
*
*/
#define CFG_SCAN_BACKOFF_MULTIPLIER CFG_INI_UINT( \
"gScanBackoffMultiplier", \
0, \
255, \
0, \
CFG_VALUE_OR_DEFAULT, \
"Scan backoff multiplier")
/*
*
* mawc_nlo_enabled - For NLO/PNO, enable MAWC based scan
* @Min: 0
* @Max: 1
* @Default: 1
*
* Enable/Disable the Motion Aided Wireless Connectivity
* based NLO using this parameter
*
* Related: NLO, PNO
*
* Usage: Internal/External
*
*
*/
#define CFG_MAWC_NLO_ENABLED CFG_INI_BOOL( \
"mawc_nlo_enabled", \
1, \
"Enable MAWC based scan")
/*
*
* mawc_nlo_exp_backoff_ratio - Exponential back off ratio
* @Min: 0
* @Max: 300
* @Default: 3
*
* Configure the exponential back off ratio using this
* parameter for MAWC based NLO
* ratio of exponential backoff, next = current + current*ratio/100
*
* Related: NLO, PNO
*
* Usage: Internal/External
*
*
*/
#define CFG_MAWC_NLO_EXP_BACKOFF_RATIO CFG_INI_UINT( \
"mawc_nlo_exp_backoff_ratio", \
0, \
300, \
3, \
CFG_VALUE_OR_DEFAULT, \
"MWAC based NLO exponential ratio")
/*
*
* mawc_nlo_init_scan_interval - Initial Scan Interval
* @Min: 1000
* @Max: 0xFFFFFFFF
* @Default: 10000
*
* Configure the initial scan interval using this
* parameter for MAWC based NLO (Units in Milliseconds)
*
* Related: NLO, PNO
*
* Usage: Internal/External
*
*
*/
#define CFG_MAWC_NLO_INIT_SCAN_INTERVAL CFG_INI_UINT( \
"mawc_nlo_init_scan_interval", \
1000, \
0xFFFFFFFF, \
10000, \
CFG_VALUE_OR_DEFAULT, \
"Initial Scan Interval")
/*
*
* mawc_nlo_max_scan_interval - Maximum Scan Interval
* @Min: 1000
* @Max: 0xFFFFFFFF
* @Default: 60000
*
* Configure the maximum scan interval using this
* parameter for MAWC based NLO (Units in Milliseconds)
*
* Related: NLO, PNO
*
* Usage: Internal/External
*
*
*/
#define CFG_MAWC_NLO_MAX_SCAN_INTERVAL CFG_INI_UINT( \
"mawc_nlo_max_scan_interval", \
1000, \
0xFFFFFFFF, \
60000, \
CFG_VALUE_OR_DEFAULT, \
"Maximum Scan Interval")
#define CFG_SCAN_PNO \
CFG(CFG_MAX_SCHED_SCAN_PLAN_ITERATIONS) \
CFG(CFG_MAX_SCHED_SCAN_PLAN_INTERVAL) \
CFG(CFG_PNO_SCAN_SUPPORT) \
CFG(CFG_ENABLE_DFS_PNO_CHNL_SCAN) \
CFG(CFG_PNO_SCAN_TIMER_REPEAT_VALUE) \
CFG(CFG_PNO_SLOW_SCAN_MULTIPLIER) \
CFG(CFG_PNO_CHANNEL_PREDICTION) \
CFG(CFG_TOP_K_NUM_OF_CHANNELS) \
CFG(CFG_STATIONARY_THRESHOLD) \
CFG(CFG_CHANNEL_PREDICTION_SCAN_TIMER) \
CFG(CFG_ADAPTIVE_PNOSCAN_DWELL_MODE) \
CFG(CFG_SCAN_BACKOFF_MULTIPLIER) \
CFG(CFG_MAWC_NLO_ENABLED) \
CFG(CFG_MAWC_NLO_EXP_BACKOFF_RATIO) \
CFG(CFG_MAWC_NLO_INIT_SCAN_INTERVAL) \
CFG(CFG_MAWC_NLO_MAX_SCAN_INTERVAL)
#else
#define CFG_SCAN_PNO
#endif /* FEATURE_WLAN_SCAN_PNO */
/*
*
* gActiveMaxChannelTimeConc - Maximum active scan time in milliseconds.
* @Min: 0
* @Max: 10000
* @Default: 40
*
* This ini is used to set maximum active scan time in STA+SAP concurrent
* mode.
*
* Related: None.
*
* Supported Feature: Concurrency
*
* Usage: Internal/External
*
*
*/
#define CFG_ACTIVE_MAX_CHANNEL_TIME_CONC CFG_INI_UINT(\
"gActiveMaxChannelTimeConc",\
0, 10000, MCL_OR_WIN_VALUE(40, 0),\
CFG_VALUE_OR_DEFAULT, \
"active scan time in STA+SAP concurrent")
/*
*
* gPassiveMaxChannelTimeConc - Maximum passive scan time in milliseconds.
* @Min: 0
* @Max: 10000
* @Default: 110
*
* This ini is used to set maximum passive scan time in STA+SAP concurrent
* mode.
*
* Related: None.
*
* Supported Feature: Concurrency
*
* Usage: Internal/External
*
*
*/
#define CFG_PASSIVE_MAX_CHANNEL_TIME_CONC CFG_INI_UINT(\
"gPassiveMaxChannelTimeConc",\
0, 10000, MCL_OR_WIN_VALUE(110, 0),\
CFG_VALUE_OR_DEFAULT, \
"Set priority for connection with bssid_hint")
/*
*
* gRestTimeConc - Rest time before moving to a new channel to scan.
* @Min: 0
* @Max: 10000
* @Default: 100
*
* This ini is used to configure rest time.
*
* Related: None.
*
* Supported Feature: Concurrency
*
* Usage: Internal/External
*
*
*/
#define CFG_MAX_REST_TIME_CONC CFG_INI_UINT(\
"nRestTimeConc",\
0, 10000, MCL_OR_WIN_VALUE(100, 0),\
CFG_VALUE_OR_DEFAULT, \
"Rest time before moving to a new channel")
/*
*
* min_rest_time_conc - Mininum time spent on home channel before moving to a
* new channel to scan.
* @Min: 0
* @Max: 50
* @Default: 50
*
* This ini is used to configure minimum time spent on home channel before
* moving to a new channel to scan.
*
* Related: None.
*
* Supported Feature: Concurrency
*
* Usage: Internal/External
*
*
*/
#define CFG_MIN_REST_TIME_CONC CFG_INI_UINT(\
"min_rest_time_conc",\
0, 50, MCL_OR_WIN_VALUE(50, 0),\
CFG_VALUE_OR_DEFAULT, \
"minimum time spent on home channel")
/*
*
* wake_lock_in_user_scan - use wake lock during user scan
* @Min: 0
* @Max: 1
* @Default: 0
*
* This ini is used to define if wake lock is held used during user scan req
*
* Related: Scan
*
* Usage: Internal/External
*
*
*/
#define CFG_ENABLE_WAKE_LOCK_IN_SCAN CFG_INI_BOOL( \
"wake_lock_in_user_scan", \
false, \
"use wake lock during scan")
/*
*
* gIdleTimeConc - Data inactivity time in msec.
* @Min: 0
* @Max: 25
* @Default: 25
*
* This ini is used to configure data inactivity time in msec on bss channel
* that will be used by scan engine in firmware.
* For example if this value is 25ms then firmware will check for data
* inactivity every 25ms till gRestTimeConc is reached.
* If inactive then scan engine will move from home channel to scan the next
* frequency.
*
* Related: None.
*
* Supported Feature: Concurrency
*
* Usage: Internal/External
*
*
*/
#define CFG_IDLE_TIME_CONC CFG_INI_UINT(\
"gIdleTimeConc",\
0, 25, MCL_OR_WIN_VALUE(25, 0),\
CFG_VALUE_OR_DEFAULT, \
"data inactivity time on bss channel")
/*
*
* gEnableMacAddrSpoof - Enable mac address randomization feature.
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to enable/disable mac address randomization for scan.
*
* Supported Feature: SCAN
*
*
* Usage: Internal/External
*
*
*/
#define CFG_ENABLE_MAC_ADDR_SPOOFING CFG_INI_BOOL( \
"gEnableMacAddrSpoof", \
true, \
"Enable mac spoofing")
/*
*
* gScanAgingTime - Set scan aging time
* @Min: 0
* @Max: 200
* @Default: 30
*
* This ini is used to set scan aging timeout value
* in secs. For example after 30 secs the bss results
* greater than 30secs age will be flushed.
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: External
*
*
*/
#ifdef QCA_WIFI_NAPIER_EMULATION
#define CFG_SCAN_AGING_TIME_DEFAULT (90)
#else
#define CFG_SCAN_AGING_TIME_DEFAULT (30)
#endif
#define CFG_SCAN_AGING_TIME CFG_INI_UINT( \
"gScanAgingTime", \
0, \
200, \
CFG_SCAN_AGING_TIME_DEFAULT, \
CFG_VALUE_OR_DEFAULT, \
"scan aging time")
/*
*
* extscan_adaptive_dwell_mode Enable adaptive dwell mode
* during ext scan
* @Min: 0
* @Max: 4
* @Default: 1
*
* This ini will set the algo used in dwell time optimization
* during ext scan. see enum scan_dwelltime_adaptive_mode.
* Acceptable values for this:
* 0: Default (Use firmware default mode)
* 1: Conservative optimization
* 2: Moderate optimization
* 3: Aggressive optimization
* 4: Static
*
* Related: None
*
* Supported Feature: Scan
*
* Usage: External
*
*
*/
#define CFG_ADAPTIVE_EXTSCAN_DWELL_MODE CFG_INI_UINT( \
"extscan_adaptive_dwell_mode", \
0, \
4, \
1, \
CFG_VALUE_OR_DEFAULT, \
"ext scan adaptive dwell mode")
/*
*
* sta_scan_burst_duration - Burst duration in case of split scan.
* @Min: 0
* @Max: 180
* @Default: 0
*
* This ini is used to set burst duration of sta scan requests.
*
* Related: None.
*
* Supported Feature: Concurrency
*
* Usage: External
*
*
*/
#define CFG_STA_SCAN_BURST_DURATION CFG_INI_UINT( \
"sta_scan_burst_duration", \
0, \
180, \
0, \
CFG_VALUE_OR_DEFAULT, \
"sta scan burst duration")
/*
*
* p2p_scan_burst_duration - Burst duration in case of split scan for p2p scan.
* @Min: 0
* @Max: 180
* @Default: 0
*
* This ini is used to set burst duration of scan for p2p scan requests.
*
* Related: None.
*
* Supported Feature: Concurrency
*
* Usage: External
*
*
*/
#define CFG_P2P_SCAN_BURST_DURATION CFG_INI_UINT( \
"p2p_scan_burst_duration", \
0, \
180, \
0, \
CFG_VALUE_OR_DEFAULT, \
"p2p scan burst duration")
/*
*
* go_scan_burst_duration - Burst duration in case of split scan when GO is
* active.
* @Min: 0
* @Max: 180
* @Default: 0
*
* This ini is used to set burst duration of scan when GO is active.
*
* Related: None.
*
* Supported Feature: Concurrency
*
* Usage: External
*
*
*/
#define CFG_GO_SCAN_BURST_DURATION CFG_INI_UINT( \
"go_scan_burst_duration", \
0, \
180, \
0, \
CFG_VALUE_OR_DEFAULT, \
"go scan burst duration")
/*
*
* ap_scan_burst_duration - Burst duration in case of split scan when ap
* is active.
* @Min: 0
* @Max: 32
* @Default: 0
*
* This ini is used to set burst duration of scan when SAP is active.
*
* Related: None.
*
* Supported Feature: Concurrency
*
* Usage: External
*
*
*/
#define CFG_AP_SCAN_BURST_DURATION CFG_INI_UINT( \
"ap_scan_burst_duration", \
0, \
32, \
0, \
CFG_VALUE_OR_DEFAULT, \
"ap scan burst duration")
/*
*
* gSkipDfsChannelInP2pSearch - Skip DFS Channel in case of P2P Search
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to disable(skip) dfs channel in p2p search.
* Related: None.
*
* Supported Feature: DFS P2P
*
* Usage: External
*
*
*/
#define CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH CFG_INI_BOOL( \
"gSkipDfsChannelInP2pSearch", \
1, \
"skip dfs channel in p2p search")
/*
*
* gEnableConnectedScan - Will enable or disable scan in connected state
* This ini is used to enable or disable the scanning in
* Connected state
* @Min: 0
* @Max: 1
* @Default: 1
*
* Related: None
*
* Supported Feature: STA
*
* Usage: External
*
*
*/
#define CFG_ENABLE_CONNECTED_SCAN CFG_INI_BOOL( \
"gEnableConnectedScan", \
true, \
"Enable/disable scan in connected state")
/*
*
* gEnableSNRMonitoring - Enables SNR Monitoring
* @Min: 0
* @Max: 1
* @Default: 0
*
* This ini is used to set default snr monitor
*
* Related: None
*
* Supported Feature: STA
*
* Usage: Internal/External
*
*
*/
#define CFG_ENABLE_SNR_MONITORING CFG_INI_BOOL(\
"gEnableSNRMonitoring",\
false,\
"Enable/Disable SNR Monitoring")
#define CFG_SCAN_ALL \
CFG(CFG_DROP_BCN_ON_CHANNEL_MISMATCH) \
CFG(CFG_ENABLE_WAKE_LOCK_IN_SCAN) \
CFG(CFG_ACTIVE_MAX_CHANNEL_TIME) \
CFG(CFG_ENABLE_DFS_SCAN) \
CFG(CFG_ENABLE_CONNECTED_SCAN) \
CFG(CFG_INITIAL_NO_DFS_SCAN) \
CFG(CFG_ACTIVE_MAX_2G_CHANNEL_TIME) \
CFG(CFG_PASSIVE_MAX_CHANNEL_TIME) \
CFG(CFG_SCAN_NUM_PROBES) \
CFG(CFG_SCAN_PROBE_REPEAT_TIME) \
CFG(CFG_ADAPTIVE_SCAN_DWELL_MODE) \
CFG(CFG_ADAPTIVE_SCAN_DWELL_MODE_NC) \
CFG(CFG_HONOUR_NL_SCAN_POLICY_FLAGS) \
CFG(CFG_IS_BSSID_HINT_PRIORITY) \
CFG(CFG_PASSIVE_MAX_CHANNEL_TIME_CONC) \
CFG(CFG_ACTIVE_MAX_CHANNEL_TIME_CONC) \
CFG(CFG_MAX_REST_TIME_CONC) \
CFG(CFG_MIN_REST_TIME_CONC) \
CFG(CFG_IDLE_TIME_CONC) \
CFG(CFG_ENABLE_MAC_ADDR_SPOOFING) \
CFG(CFG_SCAN_AGING_TIME) \
CFG(CFG_ADAPTIVE_EXTSCAN_DWELL_MODE) \
CFG(CFG_STA_SCAN_BURST_DURATION) \
CFG(CFG_P2P_SCAN_BURST_DURATION) \
CFG(CFG_GO_SCAN_BURST_DURATION) \
CFG(CFG_ENABLE_SNR_MONITORING) \
CFG(CFG_AP_SCAN_BURST_DURATION) \
CFG(CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH) \
CFG_SCAN_PNO
#endif /* __CONFIG_SCAN_H */