/*
* Copyright (c) 2017,2019 The Linux Foundation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of The Linux Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef CONSTANTS_H_
#define CONSTANTS_H_
#include <stdlib.h>
#include <stdio.h>
#define PRE_PHASE_ZERO_TEST_CONFIGURATION 0
/*----------------------------------------------------------------------
*Configuration 1 (see configure_system_1 )
*-----USB_PROD--->[IPA DMA]----USB_CONS--->
*----------------------------------------------------------------------
*/
#define PHASE_ZERO_TEST_CONFIGURATION 1
/*----------------------------------------------------------------------
*Configuration 2 (see configure_system_2 )
* [IPA]----USB2_CONS-->
*-----USB_PROD--->[IPA]----USB3_CONS--->
* [IPA]----USB4_CONS--->
*----------------------------------------------------------------------
*/
#define PHASE_TWO_TEST_CONFIGURATION 2
/*----------------------------------------------------------------------
*Configuration 3 (see configure_system_3 )
* [IPA]----USB_CONS------>
*-----USB2_PROD--->[IPA]----USB2_CONS--->
* [IPA]----USB4_CONS---->
*----------------------------------------------------------------------
*/
#define PHASE_THREE_TEST_CONFIGURATION 3
/*Configuration 5 (see configure_system_5 )
* [IPA]----USB2_CONS + Header Insertion (6Bytes) -->
*-----USB_PROD--->[IPA]----USB3_CONS +
*Header Insertion (22Bytes) + Length offset (11Bytes) -->
* [IPA]----USB4_CONS +
*Header Insertion (22Bytes) + Length offset (11Bytes) + Const(1Byte)-->
*/
/* This Cfg is only for USB Integration Phase I*/
#define PHASE_FIVE_TEST_CONFIGURATION 5
#define PHASE_SIX_TEST_CONFIGURATION 6
/*Configuration 7 (see configure_system_7 )
* [IPA]----USB2_CONS-->
*-----USB_PROD--->[IPA]----USB3_CONS--->
* [IPA]----USB4_CONS--->
* [IPA]----A5 - Exception Pipe--->
*/
#define PHASE_SEVEN_TEST_CONFIGURATION 7
/*----------------------------------------------------------------------
*Configuration 8 (see configure_system_8 )
*-----USB3_CONS--->[IPA DMA]----USB_CONS (TLP aggregation byte limit)--->
*-----USB_PROD (TLP deaggregation)--->[IPA DMA]----USB3_CONS--->
*-----USB2_PROD (TLP deaggregation)--->
*-----[IPA DMA]----USB_CONS (TLP aggregation byte limit)--->
*-----USB4_PROD--->[IPA DMA]----USB2_CONS (TLP aggregation time limit)--->
*----------------------------------------------------------------------
*/
#define PHASE_EIGHT_TEST_CONFIGURATION 8
/*----------------------------------------------------------------------
*Configuration 9 (see configure_system_9 )
*-----USB3_PROD--->[IPA DMA]----USB_CONS (MBIM aggregation byte limit)--->
*-----USB_PROD (MBIM deaggregation)--->[IPA DMA]----USB3_CONS--->
*-----USB2_PROD (MBIM deaggregation)--->
*-----[IPA DMA]----USB_CONS (MBIM aggregation byte limit)--->
*-----USB4_PROD--->[IPA DMA]----USB2_CONS (MBIM aggregation time limit)--->
*----------------------------------------------------------------------
*/
#define PHASE_NINE_TEST_CONFIGURATION 9
/*----------------------------------------------------------------------
*Configuration 10 (see configure_system_10 )
*-----USB_PROD--->[IPA DMA]----USB_CONS (MBIM aggregation no limits)--->
*----------------------------------------------------------------------
*/
#define PHASE_TEN_TEST_CONFIGURATION 10
/*----------------------------------------------------------------------
*Configuration 11 (see configure_system_11 )
*-----USB_PROD----->[IPA]----
* USB2_CONS(MBIM aggregation byte limit)--->
*-USB2_PROD (MBIM deaggregation)->[IPA]----USB3_CONS--->
*------------------>[IPA]----
*USB_CONS (MBIM aggregation time limit)----------->
*------------------>[IPA]----
*A5_LAN_WAN_CONS (MBIM aggregation no limits)---->
*----------------------------------------------------------------------
*/
#define PHASE_ELEVEN_TEST_CONFIGURATION 11
/*----------------------------------------------------------------------
*Configuration 12 (see configure_system_12 )
*-----USB_PROD----->[IPA]----USB2_CONS (MBIM aggregation byte limit)--->
*-USB2_PROD (MBIM deaggregation)->[IPA]----USB3_CONS--->
*------------------>[IPA]----
* USB_CONS (MBIM aggregation time limit)----------->
*------------------>[IPA]----
* A5_LAN_WAN_CONS (MBIM aggregation no limits)---->
*----------------------------------------------------------------------
*/
#define PHASE_TWELVE_TEST_CONFIGURATION 12
/*----------------------------------------------------------------------
*Configuration 9 (see configure_system_17 )
*-----USB3_PROD--->[IPA DMA]----USB_CONS (RNDIS aggregation byte limit)--->
*-----USB_PROD (RNDIS deaggregation)--->[IPA DMA]----USB3_CONS--->
*-----USB2_PROD (RNDIS deaggregation)--->
*-----[IPA DMA]----USB_CONS (RNDIS aggregation byte limit)--->
*-----USB4--->[IPA DMA]----USB2_CONS (RNDIS aggregation time limit)--->
*----------------------------------------------------------------------
*/
#define PHASE_SEVENTEEN_TEST_CONFIGURATION 17
/*
* Data path test
*/
#define PHASE_EIGHTEEN_TEST_CONFIGURATION 18
/*----------------------------------------------------------------------
*Configuration 19 (see configure_system_19 )
*-----USB_PROD--->[IPA DMA]----USB_CONS--->
*-----suspend [IPA DMA]----USB_CONS (for testing suspend interrupt)--->
*----------------------------------------------------------------------
*/
#define PHASE_NINETEEN_TEST_CONFIGURATION 19
#define PHASE_TWENTY_TEST_CONFIGURATION 20
/*----------------------------------------------------------------------
*Configuration 20 (see configure_system_20 )
*-----PROD (WLAN header removal)--------------------->[IPA]----CONS---->
*-----PROD (RNDIS de-aggregation + Header removal)--->[IPA]
*----------------------------------------------------------------------
*/
enum IPATestConfiguration {
IPA_TEST_CONFIFURATION_0 = PRE_PHASE_ZERO_TEST_CONFIGURATION,
IPA_TEST_CONFIFURATION_1 = PHASE_ZERO_TEST_CONFIGURATION,
IPA_TEST_CONFIFURATION_2 = PHASE_TWO_TEST_CONFIGURATION,
IPA_TEST_CONFIFURATION_3 = PHASE_THREE_TEST_CONFIGURATION,
IPA_TEST_CONFIFURATION_5 = PHASE_FIVE_TEST_CONFIGURATION,
IPA_TEST_CONFIFURATION_6 = PHASE_SIX_TEST_CONFIGURATION,
IPA_TEST_CONFIFURATION_7 = PHASE_SEVEN_TEST_CONFIGURATION,
IPA_TEST_CONFIGURATION_8 = PHASE_EIGHT_TEST_CONFIGURATION,
IPA_TEST_CONFIGURATION_9 = PHASE_NINE_TEST_CONFIGURATION,
IPA_TEST_CONFIGURATION_10 = PHASE_TEN_TEST_CONFIGURATION,
IPA_TEST_CONFIGURATION_11 = PHASE_ELEVEN_TEST_CONFIGURATION,
IPA_TEST_CONFIGURATION_12 = PHASE_TWELVE_TEST_CONFIGURATION,
IPA_TEST_CONFIGURATION_17 = PHASE_SEVENTEEN_TEST_CONFIGURATION,
IPA_TEST_CONFIGURATION_18 = PHASE_EIGHTEEN_TEST_CONFIGURATION,
IPA_TEST_CONFIGURATION_19 = PHASE_NINETEEN_TEST_CONFIGURATION,
IPA_TEST_CONFIGURATION_20 = PHASE_NINETEEN_TEST_CONFIGURATION,
};
#define CONFIGURATION_NODE_PATH "/dev/ipa_test"
/*producer*/
#define INTERFACE0_TO_IPA_DATA_PATH "/dev/to_ipa_0"
#define INTERFACE0_FROM_IPA_DATA_PATH NULL
/*producer*/
#define INTERFACE4_TO_IPA_DATA_PATH "/dev/to_ipa_1"
#define INTERFACE4_FROM_IPA_DATA_PATH NULL
/*producer*/
#define INTERFACE5_TO_IPA_DATA_PATH "/dev/to_ipa_2"
#define INTERFACE5_FROM_IPA_DATA_PATH NULL
/*consumer*/
#define INTERFACE1_TO_IPA_DATA_PATH NULL
#define INTERFACE1_FROM_IPA_DATA_PATH "/dev/from_ipa_0"
/*consumer 2*/
#define INTERFACE2_TO_IPA_DATA_PATH NULL
#define INTERFACE2_FROM_IPA_DATA_PATH "/dev/from_ipa_1"
/*Default consumer*/
#define INTERFACE3_TO_IPA_DATA_PATH NULL
#define INTERFACE3_FROM_IPA_DATA_PATH "/dev/from_ipa_2"
/*Exceptions producer*/
#define INTERFACE_TO_IPA_EXCEPTION_PATH NULL
#define INTERFACE_FROM_IPA_EXCEPTION_PATH "/dev/ipa_exception_pipe"
/*The next configuration should be used by the ITAKEM as well.*/
/*----------------------------------------------------------------------
*Configuration 1 (see configure_system_1 )
*-----USB_PROD--->[IPA DMA]----USB_CONS--->
*----------------------------------------------------------------------
*/
#define CONFIG_1_FROM_USB1_TO_IPA_DMA "/dev/to_ipa_0"
#define CONFIG_1_FROM_IPA_TO_USB1_DMA "/dev/from_ipa_0"
/*----------------------------------------------------------------------
*Configuration 2 (see configure_system_2 )
* [IPA]----USB2_CONS-->
*-----USB_PROD--->[IPA]----USB3_CONS--->
* [IPA]----Q6_LAN_CONS--->
*---------------------------------------------------------------------
*/
#define CONFIG_2_FROM_USB_TO_IPA "/dev/to_ipa_0"
#define CONFIG_2_FROM_IPA_TO_A2_NDUN "/dev/from_ipa_0"
#define CONFIG_2_FROM_IPA_TO_A2_DUN "/dev/from_ipa_1"
#define CONFIG_2_FROM_IPA_TO_Q6_LAN "/dev/from_ipa_2"
/*USB1 is an EthernetII Client*/
#define FROM_USB1_TO_IPA "/dev/to_ipa_0"
#define FROM_IPA_TO_USB1 "/dev/from_ipa_0"
#define USB1_CLIENT_HEADER_LENGTH 14
/*----------------------------------------------------------------------
*Configuration 3 (see configure_system_3 )
* [IPA]----USB_CONS------>
*-----USB2_PROD--->[IPA]----USB2_CONS--->
* [IPA]----Q6_LAN_CONS---->
*----------------------------------------------------------------------
*/
#define CONFIG_3_FROM_A2_NDUN_TO_IPA "/dev/to_ipa_0"
#define CONFIG_3_FROM_IPA_TO_USB1 "/dev/from_ipa_0"
#define CONFIG_3_FROM_IPA_TO_A2_NDUN "/dev/from_ipa_1"
#define CONFIG_3_FROM_IPA_TO_Q6_LAN "/dev/from_ipa_2"
/*----------------------------------------------------------------------
*Configuration 8 (see configure_system_8 )
*-----USB3_PROD--->[IPA DMA]----
*-----USB_CONS (TLP aggregation byte limit)--->
*-----USB_PROD (TLP deaggregation)--->[IPA DMA]----USB3_CONS--->
*-----USB2_PROD (TLP deaggregation)--->
* [IPA DMA]----USB_CONS (TLP aggregation byte limit)--->
*-----USB4--->[IPA DMA]----USB2_CONS (TLP aggregation time limit)--->
*----------------------------------------------------------------------
*/
#define CONFIG_8_NO_AGG_TO_IPA_AGG "/dev/to_ipa_0"
#define CONFIG_8_DEAGG_TO_IPA_NO_AGG "/dev/to_ipa_1"
#define CONFIG_8_DEAGG_TO_IPA_AGG "/dev/to_ipa_2"
#define CONFIG_8_NO_AGG_TO_IPA_AGG_TIME "/dev/to_ipa_3"
#define CONFIG_8_FROM_IPA_AGG "/dev/from_ipa_0"
#define CONFIG_8_FROM_IPA_NO_AGG "/dev/from_ipa_1"
#define CONFIG_8_DEAGG_FROM_IPA_AGG "/dev/from_ipa_2"
/*----------------------------------------------------------------------
*Configuration 9 (see configure_system_9 )
*-----USB3_PROD--->[IPA DMA]----
* USB_CONS (MBIM aggregation byte limit)--->
*-----USB_PROD (MBIM deaggregation)--->[IPA DMA]----USB3_CONS--->
*-----USB2_PROD (MBIM deaggregation)--->
* [IPA DMA]----USB_CONS (MBIM aggregation byte limit)--->
*-----USB4--->[IPA DMA]----
* USB2_CONS (MBIM aggregation time limit)--->
*----------------------------------------------------------------------
*/
#define CONFIG_9_NO_AGG_TO_IPA_AGG "/dev/to_ipa_0"
#define CONFIG_9_DEAGG_TO_IPA_NO_AGG "/dev/to_ipa_1"
#define CONFIG_9_DEAGG_TO_IPA_AGG "/dev/to_ipa_2"
#define CONFIG_9_NO_AGG_TO_IPA_AGG_TIME "/dev/to_ipa_3"
#define CONFIG_9_FROM_IPA_AGG "/dev/from_ipa_0"
#define CONFIG_9_FROM_IPA_NO_AGG "/dev/from_ipa_1"
#define CONFIG_9_DEAGG_FROM_IPA_AGG "/dev/from_ipa_2"
/*----------------------------------------------------------------------
*Configuration 10 (see configure_system_10 )
*-----USB_PROD--->[IPA DMA]----
* USB_CONS (MBIM aggregation no limits)--->
*----------------------------------------------------------------------
*/
#define CONFIG_10_TO_IPA_AGG_ZERO_LIMITS "/dev/to_ipa_0"
#define CONFIG_10_FROM_IPA_AGG_ZERO_LIMITS "/dev/from_ipa_0"
/*----------------------------------------------------------------------
*Configuration 11 (see configure_system_11 )
*-----USB_PROD----->[IPA]----
* USB2_CONS (MBIM aggregation byte limit)--->
* USB2_PROD (MBIM deaggregation)->[IPA]----USB3_CONS--->
*------------------>[IPA]----
* USB_CONS (MBIM aggregation time limit)----------->
*------------------>[IPA
* A5_LAN_WAN_CONS (MBIM aggregation no limits)---->
*----------------------------------------------------------------------
*/
#define CONFIG_11_TO_IPA "/dev/to_ipa_0"
#define CONFIG_11_TO_IPA_DEAGG "/dev/to_ipa_1"
#define CONFIG_11_FROM_IPA_AGG "/dev/from_ipa_0"
#define CONFIG_11_FROM_IPA "/dev/from_ipa_1"
#define CONFIG_11_FROM_IPA_AGG_TIME "/dev/from_ipa_2"
#define CONFIG_11_FROM_IPA_ZERO_LIMITS "/dev/from_ipa_3"
/*----------------------------------------------------------------------
*Configuration 12 (see configure_system_12 )
*-----USB_PROD----->[IPA]----
* USB2_CONS (MBIM aggregation byte limit)--->
*-USB2_PROD (MBIM deaggregation)->[IPA]----USB3_CONS--->
*------------------>[IPA]----
* USB_CONS (MBIM aggregation time limit)----------->
*------------------>[IPA]----
* A5_LAN_WAN_CONS (MBIM aggregation no limits)---->
*----------------------------------------------------------------------
*/
#define CONFIG_12_TO_IPA "/dev/to_ipa_0"
#define CONFIG_12_TO_IPA_DEAGG "/dev/to_ipa_1"
#define CONFIG_12_FROM_IPA_AGG "/dev/from_ipa_0"
#define CONFIG_12_FROM_IPA "/dev/from_ipa_1"
#define CONFIG_12_FROM_IPA_AGG_TIME "/dev/from_ipa_2"
#define CONFIG_12_FROM_IPA_ZERO_LIMITS "/dev/from_ipa_3"
/*Configuration 7 (see configure_system_7 )
* [IPA]----USB2_CONS-->
*-----USB_PROD--->[IPA]----USB3_CONS--->
* [IPA]----Q6_LAN_CONS--->
* [IPA]----A5 - Exception Pipe--->
*/
#define CONFIG_7_FROM_USB1_TO_IPA "/dev/to_ipa_0"
#define CONFIG_7_FROM_IPA_TO_A5_EXCEPTION "/dev/ipa_exception_pipe"
/*----------------------------------------------------------------------
*Configuration 17 (see configure_system_17 )
*-----USB_PROD----->[IPA]----
* USB2_CONS (RNDIS aggregation byte limit)--->
* USB2_PROD (RNDIS deaggregation)->[IPA]----USB3_CONS--->
*------------------>[IPA]----
* USB_CONS (RNDIS aggregation time limit)----------->
*------------------>[IPA]----
* A5_LAN_WAN_CONS (RNDIS aggregation no limits)---->
*----------------------------------------------------------------------
*/
#define CONFIG_17_TO_IPA "/dev/to_ipa_0"
#define CONFIG_17_TO_IPA_NO_HDR "/dev/to_ipa_1"
#define CONFIG_17_TO_IPA_DEAGG "/dev/to_ipa_2"
#define CONFIG_17_FROM_IPA_AGG "/dev/from_ipa_0"
#define CONFIG_17_FROM_IPA "/dev/from_ipa_1"
#define CONFIG_17_FROM_IPA_AGG_TIME "/dev/from_ipa_2"
#define CONFIG_17_FROM_IPA_ZERO_LIMITS "/dev/from_ipa_3"
/*----------------------------------------------------------------------
*Configuration 18 (see configure_system_18 )---------------------------
*-----USB_PROD----->[IPA]--------------->USB_CONS--------->A5----------
*-----USB_PROD2 is a dummy endpoint handle for packet handling between-
*-----user space and kernel space in the IPA driver--------------------
*----------------------------------------------------------------------
*/
#define CONFIG_18_TO_IPA "/dev/to_ipa_0"
#define CONFIG_18_DUMMY_ENDPOINT "/dev/to_ipa_1"
#define CONFIG_18_FROM_IPA "/dev/from_ipa_0"
/*----------------------------------------------------------------------
*Configuration 19 (see configure_system_19 )
*-----USB_PROD--->[IPA DMA]----USB_CONS--->
*----------------------------------------------------------------------
*/
#define CONFIG_19_FROM_USB_TO_IPA_DMA "/dev/to_ipa_0"
#define CONFIG_19_FROM_IPA_TO_USB_DMA "/dev/from_ipa_0"
enum ipv6_ext_hdr_type {
HOP_BY_HOP_OPT = 0,
DEST_OPT = 60,
ROUTING = 43,
FRAGMENT = 44,
AH = 51,
ESP = 50,
DEST_OPT_UL = 60,
Mobility = 135,
NONE = 59
};
/*File that are being used by the test application:*/
#define IPV4_FILE_PATH "Input/IPV4_3"
/*---------------------------------------------------------------------
*XUnit tests results format file name
*----------------------------------------------------------------------
*/
#define XUNIT_REPORT_PATH_AND_NAME "junit_result.xml"
#endif /* CONSTANTS_H_ */