/*
* Copyright (c) 2012-2021 The Linux Foundation. All rights reserved.
* Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
/**
* DOC: This file contains centralized definitions of converged configuration.
*/
#ifndef __CFG_MLME_GENERIC_H
#define __CFG_MLME_GENERIC_H
#define CFG_PMF_SA_QUERY_MAX_RETRIES_TYPE CFG_INI_UINT
#define CFG_PMF_SA_QUERY_RETRY_INTERVAL_TYPE CFG_INI_UINT
/**
* enum monitor_mode_concurrency - Monitor mode concurrency
* @MONITOR_MODE_CONC_NO_SUPPORT: No concurrency supported with monitor mode
* @MONITOR_MODE_CONC_STA_SCAN_MON: STA + monitor mode concurrency is supported
* @MONITOR_MODE_CONC_AFTER_LAST: last value in enum
* @MONITOR_MODE_CONC_MAX: max value supported
*/
enum monitor_mode_concurrency {
MONITOR_MODE_CONC_NO_SUPPORT,
MONITOR_MODE_CONC_STA_SCAN_MON,
MONITOR_MODE_CONC_AFTER_LAST,
MONITOR_MODE_CONC_MAX = MONITOR_MODE_CONC_AFTER_LAST - 1,
};
/**
* enum wlan_wds_mode - wds mode
* @WLAN_WDS_MODE_DISABLED: WDS is disabled
* @WLAN_WDS_MODE_REPEATER: WDS repeater mode
* @WLAN_WDS_MODE_LAST: last value in enum
* @WLAN_WDS_MODE_MAX: max value supported
* This is used for 'type' values in wds_mode
*/
enum wlan_wds_mode {
WLAN_WDS_MODE_DISABLED = 0,
WLAN_WDS_MODE_REPEATER = 1,
/* keep this last */
WLAN_WDS_MODE_LAST,
WLAN_WDS_MODE_MAX = WLAN_WDS_MODE_LAST - 1,
};
/**
* enum wlan_eht_mode - EHT mode of operation
* @WLAN_EHT_MODE_DISABLED: EHT is disabled
* @WLAN_EHT_MODE_SLO: Single-link operation mode
* @WLAN_EHT_MODE_MLSR: Multi-link Single-Radio mode
* @WLAN_EHT_MODE_MLMR: Multi-link Multi-Radio mode
* @WLAN_EHT_MODE_EMLSR: Enhanced Multi-link Single-Radio mode
* @WLAN_EHT_MODE_LAST: last value in enum
* @WLAN_EHT_MODE_MAX: max value supported
*
* This is used for 'type' values in eht_mode
*/
enum wlan_eht_mode {
WLAN_EHT_MODE_DISABLED = 0,
WLAN_EHT_MODE_SLO = 1,
WLAN_EHT_MODE_MLSR = 2,
WLAN_EHT_MODE_MLMR = 3,
WLAN_EHT_MODE_EMLSR = 4,
/* keep this last */
WLAN_EHT_MODE_LAST,
WLAN_EHT_MODE_MAX = WLAN_EHT_MODE_LAST - 1,
};
/**
* enum wlan_emlsr_action_mode - EMLSR action mode
* @WLAN_EMLSR_MODE_DISABLED: EMLSR is disabled
* @WLAN_EMLSR_MODE_ENTER: Enter EMLSR operation mode
* @WLAN_EMLSR_MODE_EXIT: Exit EMLSR operation mode
* @WLAN_EMLSR_MODE_LAST: last value in enum
* @WLAN_EMLSR_MODE_MAX: max value supported
*
* This is used for 'type' values in emlsr_mode
*/
enum wlan_emlsr_action_mode {
WLAN_EMLSR_MODE_DISABLED = 0,
WLAN_EMLSR_MODE_ENTER = 1,
WLAN_EMLSR_MODE_EXIT = 2,
/* keep this last */
WLAN_EMLSR_MODE_LAST,
WLAN_EMLSR_MODE_MAX = WLAN_EMLSR_MODE_LAST - 1,
};
/**
* enum wlan_t2lm_negotiation_support - TID-to-link mapping negotiation support
* @WLAN_T2LM_DISABLE: T2LM support is disabled
* @WLAN_T2LM_SAME_LINK_SET: Mapping of all TIDs to the same link set, both DL
* and UL
* @WLAN_T2LM_RESERVED: This value is Reserved
* @WLAN_T2LM_SAME_DIFF_LINK_SET: Mapping of each TID to the same or different
* link set
* @WLAN_T2LM_SUPPORT_LAST: last value in enum
* @WLAN_T2LM_SUPPORT_MAX: max value supported
*
* This is used for 'type' values in T2LM support
*/
enum wlan_t2lm_negotiation_support {
WLAN_T2LM_DISABLE = 0,
WLAN_T2LM_SAME_LINK_SET = 1,
WLAN_T2LM_RESERVED = 2,
WLAN_T2LM_SAME_DIFF_LINK_SET = 3,
/* keep this last */
WLAN_T2LM_SUPPORT_LAST,
WLAN_T2LM_SUPPORT_MAX = WLAN_T2LM_SUPPORT_LAST - 1,
};
/**
* enum debug_packet_log_type - Debug packet log type
* @DEBUG_PKTLOG_TYPE_NONE: Debug packet log is disabled
* @DEBUG_PKTLOG_TYPE_MGMT: Management frames logging is enabled.
* @DEBUG_PKTLOG_TYPE_EAPOL: EAPOL packets logging is enabled.
* @DEBUG_PKTLOG_TYPE_DHCP: DHCP packets logging is enabled.
* @DEBUG_PKTLOG_TYPE_ACTION: Action frames logging is enabled.
* @DEBUG_PKTLOG_TYPE_ARP: ARP packets logging is enabled.
*/
enum debug_packet_log_type {
DEBUG_PKTLOG_TYPE_NONE = 0x0,
DEBUG_PKTLOG_TYPE_MGMT = 0x1,
DEBUG_PKTLOG_TYPE_EAPOL = 0x2,
DEBUG_PKTLOG_TYPE_DHCP = 0x4,
DEBUG_PKTLOG_TYPE_ACTION = 0x8,
DEBUG_PKTLOG_TYPE_ARP = 0x10,
};
/**
* enum t2lm_negotiation_support: t2lm negotiation supported
* @T2LM_NEGOTIATION_DISABLED: T2LM is disabled
* @T2LM_NEGOTIATION_ALL_TIDS_TO_SUBSET_OF_LINKS: supports the mapping
* of all TIDs to the same link set both DL and UL.
* @T2LM_NEGOTIATION_RESERVED:
* this mapping value is reserved.
* @T2LM_NEGOTIATION_DISJOINT_MAPPING: supports the mapping of
* each TID to the same or different link set.
* @T2LM_NEGOTIATION_LAST: last value in enum
* @T2LM_NEGOTIATION_MAX: max value supported
*/
enum t2lm_negotiation_support {
T2LM_NEGOTIATION_DISABLED = 0,
T2LM_NEGOTIATION_ALL_TIDS_TO_SUBSET_OF_LINKS = 1,
T2LM_NEGOTIATION_RESERVED = 2,
T2LM_NEGOTIATION_DISJOINT_MAPPING = 3,
T2LM_NEGOTIATION_LAST,
/* keep this last */
T2LM_NEGOTIATION_MAX = T2LM_NEGOTIATION_LAST - 1,
};
/**
* enum wlan_epcs_capability - EPCS capability
* @WLAN_EPCS_CAP_DISABLED: EPCS capability disable
* @WLAN_EPCS_CAP_ENABLE: EPCS capability enable
* @WLAN_EPCS_CAP_LAST: last value in enum
* @WLAN_EPCS_CAP_MAX: max value supported
*/
enum wlan_epcs_capability {
WLAN_EPCS_CAP_DISABLED = 0,
WLAN_EPCS_CAP_ENABLE = 1,
/* keep this last */
WLAN_EPCS_CAP_LAST,
WLAN_EPCS_CAP_MAX = WLAN_EPCS_CAP_LAST - 1,
};
/**
* enum wlan_epcs_frame - EPCS frame type
* @WLAN_EPCS_FRAME_TEARDOWN: EPCS teardown frame
* @WLAN_EPCS_FRAME_REQUEST: EPCS request frame
* @WLAN_EPCS_FRAME_LAST: last value in enum
* @WLAN_EPCS_FRAME_MAX: max value supported
*/
enum wlan_epcs_frame {
WLAN_EPCS_FRAME_TEARDOWN = 0,
WLAN_EPCS_FRAME_REQUEST = 1,
/* keep this last */
WLAN_EPCS_FRAME_LAST,
WLAN_EPCS_FRAME_MAX = WLAN_EPCS_FRAME_LAST - 1,
};
/*
* pmfSaQueryMaxRetries - Control PMF SA query retries for SAP
* @Min: 0
* @Max: 20
* @Default: 5
*
* This ini to set the number of PMF SA query retries for SAP
*
* Related: None.
*
* Supported Feature: PMF(11W)
*
*/
#define CFG_PMF_SA_QUERY_MAX_RETRIES CFG_PMF_SA_QUERY_MAX_RETRIES_TYPE( \
"pmfSaQueryMaxRetries", \
0, \
20, \
5, \
CFG_VALUE_OR_DEFAULT, \
"PMF SA query retries for SAP")
/*
* pmfSaQueryRetryInterval - Control PMF SA query retry interval
* for SAP in ms
* @Min: 10
* @Max: 2000
* @Default: 200
*
* This ini to set the PMF SA query retry interval for SAP in ms
*
* Related: None.
*
* Supported Feature: PMF(11W)
*
*/
#define CFG_PMF_SA_QUERY_RETRY_INTERVAL CFG_PMF_SA_QUERY_RETRY_INTERVAL_TYPE( \
"pmfSaQueryRetryInterval", \
10, \
2000, \
200, \
CFG_VALUE_OR_DEFAULT, \
"PMF SA query retry interval for SAP")
#ifdef WLAN_FEATURE_11BE
/*
* oem_eht_mlo_crypto_bitmap - OEM control to allow various EHT connection
* options using bitmap based on following ENUM (Name of ENUM to be added)
* @Min: 0x0
* @Max: 0xFFFFFFFF
* @Default: 0x20008 - To allow MLO WPA2-PMF cap APs and WPA3-SAE w/o H2E cap
*
* This INI is used to control the driver candidate selection and EHT
* connection choice based on OEM configuration. The bitmap follows the
* implementation from wlan_crypto_oem_eht_mlo_config enum
*/
#define CFG_OEM_EHT_MLO_CRYPTO_BITMAP CFG_INI_UINT( \
"oem_eht_mlo_crypto_bitmap", \
0x0, \
0xFFFFFFFF, \
0x20008, \
CFG_VALUE_OR_DEFAULT, \
"OEM control to allow/disallow crypto to EHT configuration")
#define CFG_OEM_EHT_MLO_CRYPTO_BITMAP_SUPPORTED \
CFG(CFG_OEM_EHT_MLO_CRYPTO_BITMAP)
#else
#define CFG_OEM_EHT_MLO_CRYPTO_BITMAP_SUPPORTED
#endif
/*
* <ini>
* enable_rtt_mac_randomization - Enable/Disable rtt mac randomization
* @Min: 0
* @Max: 1
* @Default: 1
*
* Usage: External
*
* </ini>
*/
#define CFG_ENABLE_RTT_MAC_RANDOMIZATION CFG_INI_BOOL( \
"enable_rtt_mac_randomization", \
1, \
"Enable RTT MAC randomization")
#define CFG_RTT3_ENABLE CFG_BOOL( \
"rtt3_enabled", \
1, \
"RTT3 enable/disable info")
/*
* <ini>
* g11hSupportEnabled - Enable 11h support
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to set 11h support flag
*
* Related: None
*
* Supported Feature: STA
*
* Usage: External
*
* </ini>
*/
#define CFG_11H_SUPPORT_ENABLED CFG_INI_BOOL( \
"g11hSupportEnabled", \
1, \
"11h Enable Flag")
/*
* <ini>
* g11dSupportEnabled - Enable 11d support
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to set 11d support flag
*
* Related: None
*
* Supported Feature: STA
*
* Usage: External
*
* </ini>
*/
#define CFG_11D_SUPPORT_ENABLED CFG_INI_BOOL( \
"g11dSupportEnabled", \
1, \
"11d Enable Flag")
/*
* rf_test_mode_enabled - Enable rf test mode support
* @Min: 0
* @Max: 1
* @Default: 0
*
* This cfg is used to set rf test mode support flag
* by default 6 G Hz security check will be enabled
* with rf test mode as disabled.
*
* Related: None
*
* Supported Feature: STA
*/
#define CFG_RF_TEST_MODE_SUPP_ENABLED CFG_BOOL( \
"rf_test_mode_enabled", \
0, \
"rf test mode Enable Flag")
#ifdef CONFIG_BAND_6GHZ
/*
* disable_vlp_sta_conn_to_sp_ap - Disable VLP STA connection to SP AP
* @Min: 0
* @Max: 1
* @Default: 0
*
* This cfg is used to disable connection when AP is operating in 6 GHz
* SP mode but STA doesn't support SP mode and supports VLP mode.
*
* Related: None
*
* Supported Feature: STA
*/
#define CFG_DISABLE_VLP_STA_CONN_TO_SP_AP CFG_BOOL( \
"disable_vlp_sta_conn_to_sp_ap", \
0, \
"disable vlp sta conn to sp ap")
#define CFG_DIS_VLP_STA_CONN_TO_SP_AP CFG(CFG_DISABLE_VLP_STA_CONN_TO_SP_AP)
#else
#define CFG_DIS_VLP_STA_CONN_TO_SP_AP
#endif
#ifdef CONFIG_BAND_6GHZ
/*
* standard_6ghz_connection_policy - Enable 6 GHz standard connection policy
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to set standard 6 GHz policies where STA will be
* allowed to scan and connect to any 6 GHz AP.
*
* Related: None
*
* Supported Feature: STA
*/
#define CFG_6GHZ_STANDARD_CONNECTION_POLICY CFG_INI_BOOL( \
"standard_6ghz_connection_policy", \
1, \
"6ghz standard 6 GHZ connection policy")
#define CFG_6GHZ_STD_CONN_POLICY CFG(CFG_6GHZ_STANDARD_CONNECTION_POLICY)
#else
#define CFG_6GHZ_STD_CONN_POLICY
#endif
#ifdef WLAN_FEATURE_11BE_MLO
/*
* emlsr_mode_enable - Enable eMLSR mode support
* @Min: 0
* @Max: 1
* @Default: 0
*
* This cfg is used to enable eMLSR mode
* If 0 - MLMR mode (Default mode)
* If 1 - eMLSR mode
*
* Related: None
*
* Supported Feature: STA
*/
#define CFG_EMLSR_MODE_ENABLE CFG_BOOL( \
"emlsr_mode_enable", \
0, \
"eMLSR mode enable flag")
#define CFG_EMLSR_MODE_ENABLED CFG(CFG_EMLSR_MODE_ENABLE)
#else
#define CFG_EMLSR_MODE_ENABLED
#endif
/*
* <ini>
* BandCapability - Preferred band (0: 2.4G, 5G, and 6G,
* 1: 2.4G only,
* 2: 5G only,
* 3: Both 2.4G and 5G,
* 4: 6G only,
* 5: Both 2.4G and 6G,
* 6: Both 5G and 6G,
* 7: 2.4G, 5G, and 6G)
* @Min: 0
* @Max: 7
* @Default: 7
*
* This ini is used to set default band capability
* (0: Both 2.4G and 5G, 1: 2.4G only, 2: 5G only, 3: Both 2.4G and 5G,
* 4: 6G only, 5: Both 2.4G and 6G, 6: Both 5G and 6G, 7: 2.4G, 5G, and 6G)
*
* Related: None
*
* Supported Feature: STA
*
* Usage: External
*
* </ini>
*/
#define CFG_BAND_CAPABILITY CFG_INI_UINT( \
"BandCapability", \
0, \
7, \
7, \
CFG_VALUE_OR_DEFAULT, \
"Band Capability")
/*
* <ini>
* gPreventLinkDown - Enable to prevent bus link from going down
* @Min: 0
* @Max: 1
* @Default: 0
*
* Enable to prevent bus link from going down. Useful for platforms that do not
* (yet) support link down suspend cases.
*
* Related: N/A
*
* Supported Feature: Suspend/Resume
*
* Usage: Internal
*
* </ini>
*/
#if defined(QCA_WIFI_EMULATION) || defined(QCA_WIFI_QCA6290)
#define CFG_PREVENT_LINK_DOWN CFG_INI_BOOL( \
"gPreventLinkDown", \
1, \
"Prevent Bus Link Down")
#else
#define CFG_PREVENT_LINK_DOWN CFG_INI_BOOL( \
"gPreventLinkDown", \
0, \
"Prevent Bus Link Down")
#endif /* QCA_WIFI_EMULATION */
/*
* <ini>
* gSelect5GHzMargin - Sets RSSI preference for 5GHz over 2.4GHz AP.
* @Min: 0
* @Max: 60
* @Default: 0
*
* Prefer connecting to 5G AP even if its RSSI is lower by gSelect5GHzMargin
* dBm than 2.4G AP. This feature requires the dependent cfg.ini
* "gRoamPrefer5GHz" set to 1
*
* Related: gRoamPrefer5GHz
*
* Supported Feature: Roaming
*
* Usage: External
*
* </ini>
*/
#define CFG_SELECT_5GHZ_MARGIN CFG_INI_UINT( \
"gSelect5GHzMargin", \
0, \
60, \
0, \
CFG_VALUE_OR_DEFAULT, \
"Select 5Ghz Margin")
/*
* <ini>
* gEnableMemDeepSleep - Sets Memory Deep Sleep on/off.
* @Min: 0
* @Max: 1
* @Default: 1
*
* This option enables/disables memory deep sleep.
* Related: None
*
* Supported Feature: General
*
* Usage: External
*
* </ini>
*/
#define CFG_ENABLE_MEM_DEEP_SLEEP CFG_INI_BOOL( \
"gEnableMemDeepSleep", \
1, \
"Enable Memory Deep Sleep")
/*
* <ini>
*
* gEnableCckTxFirOverride - Enable/disable CCK TxFIR Override
* @Min: 0 (disabled)
* @Max: 1 (enabled)
* @Default: 0 (disabled)
*
* When operating in an 802.11b mode, this configuration item forces a 2x2 radio
* configuration into 1x for Tx and 2x for Rx (ie 1x2) for regulatory compliance
* reasons.
*
* Related: enable2x2
*
* Supported Feature: 802.11b, 2x2
*
* Usage: External
*
* </ini>
*/
#define CFG_ENABLE_CCK_TX_FIR_OVERRIDE CFG_INI_BOOL( \
"gEnableCckTxFirOverride", \
0, \
"Enable CCK TX FIR Override")
/*
* <ini>
*
* gEnableForceTargetAssert - Enable/disable SSR
* @Min: 0 (disabled)
* @Max: 1 (enabled)
* @Default: 0 (disabled)
*
* This INI item is used to control subsystem restart(SSR) test framework
* Set it's value to 1 to enable APPS triggered SSR testing
*
* Related: None
*
* Supported Feature: General
*
* Usage: External
*
* </ini>
*/
#define CFG_ENABLE_CRASH_INJECT CFG_INI_BOOL( \
"gEnableForceTargetAssert", \
0, \
"Enable Crash Inject")
/*
* <ini>
*
* gEnableLpassSupport - Enable/disable LPASS Support
* @Min: 0 (disabled)
* @Max: 1 (enabled)
* @Default: 1 (disabled) if WLAN_FEATURE_LPSS is defined, 0 otherwise
*
* Related: None
*
* Supported Feature: General
*
* Usage: External
*
* </ini>
*/
#ifdef WLAN_FEATURE_LPSS
#define CFG_ENABLE_LPASS_SUPPORT CFG_INI_BOOL( \
"gEnableLpassSupport", \
1, \
"Enable LPASS Support")
#else
#define CFG_ENABLE_LPASS_SUPPORT CFG_BOOL( \
"gEnableLpassSupport", \
0, \
"Enable LPASS Support")
#endif
/*
* <ini>
*
* gEnableSelfRecovery - Enable/disable Self Recovery
* @Min: 0 (disabled)
* @Max: 1 (enabled)
* @Default: 0 (disabled)
*
* Related: None
*
* Supported Feature: General
*
* Usage: External
*
* </ini>
*/
#define CFG_ENABLE_SELF_RECOVERY CFG_INI_BOOL( \
"gEnableSelfRecovery", \
0, \
"Enable Self Recovery")
/*
* <ini>
*
* gSapDot11mc - Enable/disable SAP 802.11mc support
* @Min: 0 (disabled)
* @Max: 1 (enabled)
* @Default: 0 (disabled)
*
* Related: None
*
* Supported Feature: General
*
* Usage: External
*
* </ini>
*/
#define CFG_SAP_DOT11MC CFG_INI_BOOL( \
"gSapDot11mc", \
0, \
"SAP 802.11mc support")
/*
* <ini>
*
* gEnableFatalEvent - Enable/Disable BUG report in case of fatal event
* @Min: 0 (disabled)
* @Max: 1 (enabled)
* @Default: 1 (enabled)
*
* Related: None
*
* Supported Feature: General
*
* Usage: External
*
* </ini>
*/
#define CFG_ENABLE_FATAL_EVENT_TRIGGER CFG_INI_BOOL( \
"gEnableFatalEvent", \
1, \
"Enable Fatal Event Trigger")
/*
* <ini>
* gSub20ChannelWidth - Control sub 20 channel width (5/10 Mhz)
* @Min: 0
* @Max: 2
* @Default: 0
*
* This ini is used to set the sub 20 channel width.
* gSub20ChannelWidth=0: indicates do not use Sub 20 MHz bandwidth
* gSub20ChannelWidth=1: Bring up SAP/STA in 5 MHz bandwidth
* gSub20ChannelWidth=2: Bring up SAP/STA in 10 MHz bandwidth
*
* Related: None
*
* Supported Feature: 5/10 Mhz channel width support
*
* Usage: External
*
* </ini>
*/
#define CFG_SUB_20_CHANNEL_WIDTH CFG_INI_UINT( \
"gSub20ChannelWidth", \
0, \
2, \
0, \
CFG_VALUE_OR_DEFAULT, \
"Sub 20 Channel Width")
/*
* <ini>
* goptimize_chan_avoid_event - Optimize channel avoidance indication
* coming from firmware
* @Min: 0
* @Max: 1
* @Default: 0
*
* Related: None
*
* Supported Feature: General
*
* Usage: External
*
* </ini>
*/
#define CFG_OPTIMIZE_CA_EVENT CFG_INI_BOOL( \
"goptimize_chan_avoid_event", \
0, \
"Optimize FW CA Event")
/*
* <ini>
* fw_timeout_crash - Enable/Disable BUG ON
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to Trigger host crash when firmware fails to send the
* response to host
* fw_timeout_crash = 0 Disabled
* fw_timeout_crash = 1 Trigger host crash
*
* Related: None
*
* Supported Feature: SSR
*
* Usage: External
*
* </ini>
*/
#define CFG_CRASH_FW_TIMEOUT CFG_INI_BOOL( \
"fw_timeout_crash", \
1, \
"Enable FW Timeout Crash")
/*
* <ini>
* gDroppedPktDisconnectTh - Sets dropped packet threshold in firmware
* @Min: 0
* @Max: 65535
* @Default: 512
*
* This INI is the packet drop threshold will trigger disconnect from remote
* peer.
*
* Related: None
*
* Supported Feature: connection
*
* Usage: External
*
* </ini>
*/
#define CFG_DROPPED_PKT_DISCONNECT_THRESHOLD CFG_INI_UINT( \
"gDroppedPktDisconnectTh", \
0, \
65535, \
512, \
CFG_VALUE_OR_DEFAULT, \
"Dropped Pkt Disconnect threshold")
/*
* <ini>
* gItoRepeatCount - sets ito repeated count
* @Min: 0
* @Max: 5
* @Default: 0
*
* This ini sets the ito count in FW
*
* Usage: External
*
* </ini>
*/
#define CFG_ITO_REPEAT_COUNT CFG_INI_UINT( \
"gItoRepeatCount", \
0, \
5, \
0, \
CFG_VALUE_OR_DEFAULT, \
"ITO Repeat Count")
/*
* <ini>
* gEnableDeauthToDisassocMap - Enables deauth to disassoc map
* @Min: 0
* @Max: 1
* @Default: 0
*
* This ini is used to set default disassoc map
*
* Related: None
*
* Supported Feature: STA
*
* Usage: External
*
* </ini>
*/
#define CFG_ENABLE_DEAUTH_TO_DISASSOC_MAP CFG_INI_BOOL( \
"gEnableDeauthToDisassocMap", \
0, \
"Enables deauth to disassoc map")
/*
* <ini>
* gEnableDebugLog - Enable/Disable the Connection related logs
* @Min: 0
* @Max: 0xFF
* @Default: 0x01
*
* This ini is used to enable/disable the connection related logs
* 0x1 - Enable mgmt pkt logs (except probe req/rsp, beacons).
* 0x2 - Enable EAPOL pkt logs.
* 0x4 - Enable DHCP pkt logs.
* 0x8 - Enable mgmt action frames logs.
* 0x10 - Enable ARP pkt logs.
* 0x0 - Disable all the above connection related logs.
* The default value of 0x01 will enable all the mgmt logs
*
* Related: None
*
* Supported Feature: STA
*
* Usage: External
*
* </ini>
*/
#define CFG_ENABLE_DEBUG_PACKET_LOG CFG_INI_UINT( \
"gEnableDebugLog", \
0, 0xFF, 0x01, \
CFG_VALUE_OR_DEFAULT, \
"Enable debug log")
/*
* <ini>
* enable_beacon_reception_stats - Enable disable beacon reception stats
* @Min: 0
* @Max: 1
* @Default: 0
*
* This ini is used to enable/disable the beacon reception stats collected per
* vdev and then sent to the driver to be displayed in sysfs
*
* Related: None
*
* Supported Feature: Stats
*
* Usage: External
*
* </ini>
*/
#define CFG_ENABLE_BEACON_RECEPTION_STATS CFG_INI_BOOL( \
"enable_beacon_reception_stats", \
0, \
"Enable disable beacon reception stats")
/*
* <ini>
* disable_4way_hs_offload - Enable/Disable 4 way handshake offload to firmware
* @Min: 0
* @Max: 0x2
* @Default: 0x2
*
* 0x0 - 4-way HS to be handled in firmware for the AKMs except for SAE and
* OWE roaming the 4way HS is handled in supplicant by default
* 0x1 - 4-way HS to be handled in supplicant
* 0x2 - 4-way HS to be handled in firmware for the AKMs including the SAE
* Roam except for OWE roaming the 4way HS is handled in supplicant
*
* Based on the requirement the Max value can be increased per AKM.
*
* Related: None
*
* Supported Feature: STA Roaming
*
* Usage: External
*
* </ini>
*/
#define CFG_DISABLE_4WAY_HS_OFFLOAD CFG_INI_UINT( \
"disable_4way_hs_offload", \
0, \
0x2, \
0x2, \
CFG_VALUE_OR_DEFAULT, \
"Enable/disable 4 way handshake offload to firmware")
/*
* <ini>
* mgmt_retry_max - Maximum Retries for mgmt frames
* @Min: 0
* @Max: 31
* @Default: 15
*
* This ini is used to set maximum retries for mgmt frames
*
* Supported Feature: STA/SAP
*
* Usage: External
*
* </ini>
*/
#define CFG_MGMT_RETRY_MAX CFG_INI_UINT( \
"mgmt_retry_max", \
0, \
31, \
15, \
CFG_VALUE_OR_DEFAULT, \
"Max retries for mgmt frames")
/*
* <ini>
* enable_he_mcs0_for_mgmt_6ghz- if disabled FW will use 6Mbps 11A rate
* @Min: 0
* @Max: 1
* @Default: 0
*
* If this ini is disabled firmware will use 6Mbps 11A rate
*
* Supported Feature: STA/SAP
*
* Usage: External
*
* </ini>
*/
#define CFG_ENABLE_HE_MCS0_MGMT_6GHZ CFG_INI_BOOL( \
"enable_he_mcs0_for_mgmt_6ghz", \
0, \
"MCS0 rate for 6ghz mgmt frames")
/*
* <ini>
* bmiss_skip_full_scan - To decide whether firmware does channel map based
* partial scan or partial scan followed by full scan in case no candidate is
* found in partial scan.
* @Min: 0
* @Max: 1
* @Default: 0
*
* 0 : Based on the channel map , firmware does scan to find new AP. if AP is
* not found then it does a full scan on all valid channels.
* 1 : Firmware does channel map based partial scan only.
*
* Related: None
*
* Supported Feature: STA Roaming
*
* Usage: External
*
* </ini>
*/
#define CFG_BMISS_SKIP_FULL_SCAN CFG_INI_BOOL("bmiss_skip_full_scan", \
0, \
"To decide partial/partial scan followed by full scan")
/*
* <ini>
* gEnableRingBuffer - Enable Ring Buffer for Bug Report
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to enable Ring Buffer
*
* Related: None
*
* Supported Feature: STA/SAP
*
* Usage: External
*
* </ini>
*/
#define CFG_ENABLE_RING_BUFFER CFG_INI_BOOL( \
"gEnableRingBuffer", \
1, \
"To Enable Ring Buffer")
/*
* <ini>
* dfs_chan_ageout_time - Set DFS Channel ageout time(in seconds)
* @Min: 0
* @Max: 8
* Default: 0
*
* Ageout time is the time upto which DFS channel information such as beacon
* found is remembered. So that Firmware performs Active scan instead of the
* Passive to reduce the Dwell time.
* This ini Parameter used to set ageout timer value from host to FW.
* If not set, Firmware will disable ageout time.
*
* Supported Feature: STA scan in DFS channels
*
* Usage: External
*
* </ini>
*/
#define CFG_DFS_CHAN_AGEOUT_TIME CFG_INI_UINT("dfs_chan_ageout_time", \
0, 8, 0, CFG_VALUE_OR_DEFAULT, \
"Set DFS Channel ageout time from host to firmware")
/*
* <ini>
* sae_connect_retries - Bit mask to retry Auth and full connection on assoc
* timeout to same AP and auth retries during roaming
* @Min: 0x0
* @Max: 0x53
* @Default: 0x52
*
* This ini is used to set max auth retry in auth phase of roaming and initial
* connection and max connection retry in case of assoc timeout. MAX Auth
* retries are capped to 3, connection retries are capped to 2 and roam Auth
* retry is capped to 1.
* Default is 0x52 i.e. 1 roam auth retry, 2 auth retry and 2 full connection
* retry.
*
* Bits Retry Type
* BIT[0:2] AUTH retries
* BIT[3:5] Connection reties
* BIT[6:8] ROAM AUTH retries
*
* Some Possible values are as below
* 0 - NO auth/roam Auth retry and NO full connection retry after
* assoc timeout
* 0x49 - 1 auth/roam auth retry and 1 full connection retry
* 0x52 - 1 roam auth retry, 2 auth retry and 2 full connection retry
* 0x1 /0x2 - 0 roam auth retry, 1 or 2 auth retry respectively and NO full
* connection retry
* 0x8 /0x10 - 0 roam auth retry,NO auth retry and 1 or 2 full connection retry
* respectively.
* 0x4A - 1 roam auth retry,2 auth retry and 1 full connection retry
* 0x51 - 1 auth/roam auth retry and 2 full connection retry
*
* Related: None
*
* Supported Feature: STA SAE
*
* Usage: External
*
* </ini>
*/
#define CFG_SAE_CONNECION_RETRIES CFG_INI_UINT("sae_connect_retries", \
0, 0x53, 0x52, CFG_VALUE_OR_DEFAULT, \
"Bit mask to retry Auth and full connection on assoc timeout to same AP for SAE connection")
/*
* <ini>
*
* wls_6ghz_capable - WiFi Location Service(WLS) is 6Ghz capable
* @Min: 0 (WLS 6Ghz non-capable)
* @Max: 1 (WLS 6Ghz capable)
* @Default: 0 (WLS 6Ghz non-capable)
*
* Related: None
*
* Supported Feature: General
*
* Usage: Internal
*
* </ini>
*/
#define CFG_WLS_6GHZ_CAPABLE CFG_INI_BOOL( \
"wls_6ghz_capable", \
0, \
"WiFi Location Service(WLS) is 6Ghz capable or not")
/*
* <ini>
*
* monitor_mode_conc - Monitor mode concurrency supported
* @Min: 0
* @Max: 1
* @Default: 0
*
* Related: None
*
* Monitor mode concurrency supported
* 0 - No concurrency supported
* 1 - Allow STA scan + Monitor mode concurrency
*
* Supported Feature: General
*
* Usage: External
*
* </ini>
*/
#define CFG_MONITOR_MODE_CONCURRENCY CFG_INI_UINT( \
"monitor_mode_concurrency", \
MONITOR_MODE_CONC_NO_SUPPORT, \
MONITOR_MODE_CONC_MAX, \
MONITOR_MODE_CONC_NO_SUPPORT, \
CFG_VALUE_OR_DEFAULT, \
"Monitor mode concurrency supported")
#ifdef FEATURE_WDS
/*
* <ini>
*
* wds_mode - wds mode supported
* @Min: 0
* @Max: 1
* @Default: 0
*
* Related: None
*
* wds mode supported
* 0 - wds mode disabled
* 1 - wds repeater mode
*
* Supported Feature: General
*
* Usage: External
*
* </ini>
*/
#define CFG_WDS_MODE CFG_INI_UINT( \
"wds_mode", \
WLAN_WDS_MODE_DISABLED, \
WLAN_WDS_MODE_MAX, \
WLAN_WDS_MODE_DISABLED, \
CFG_VALUE_OR_DEFAULT, \
"wds mode supported")
#define CFG_WDS_MODE_ALL CFG(CFG_WDS_MODE)
#else
#define CFG_WDS_MODE_ALL
#endif
/*
* <ini>
* tx_retry_multiplier - TX retry multiplier
* @Min: 0
* @Max: 500
* @Default: 0
*
* This ini is used to indicate percentage to max retry limit to fw
* which can further be used by fw to multiply counter by
* tx_retry_multiplier percent.
*
* Supported Feature: STA/SAP
*
* Usage: External
*
* </ini>
*/
#define CFG_TX_RETRY_MULTIPLIER CFG_INI_UINT( \
"tx_retry_multiplier", \
0, \
500, \
0, \
CFG_VALUE_OR_DEFAULT, \
"percentage of max retry limit")
/*
* <ini>
* mgmt_frame_hw_tx_retry_count - Set hw tx retry count for mgmt action
* frame
* @Min: N/A
* @Max: N/A
* @Default: N/A
*
* Set mgmt action frame hw tx retry count, string format looks like below:
* frame_hw_tx_retry_count="<frame type>,<retry count>,..."
* frame type is enum value of mlme_cfg_frame_type.
* Retry count max value is 127.
* For example:
* frame_hw_tx_retry_count="0,64,2,32"
* The above input string means:
* For p2p go negotiation request fame, hw retry count 64
* For p2p provision discovery request, hw retry count 32
*
* Related: None.
*
* Supported Feature: STA/P2P
*
* Usage: External
*
* </ini>
*/
#define MGMT_FRM_HW_TX_RETRY_COUNT_STR_LEN (64)
#define CFG_MGMT_FRAME_HW_TX_RETRY_COUNT CFG_INI_STRING( \
"mgmt_frame_hw_tx_retry_count", \
0, \
MGMT_FRM_HW_TX_RETRY_COUNT_STR_LEN, \
"", \
"Set mgmt action frame hw tx retry count")
#if defined(WLAN_FEATURE_SR)
/*
* <ini>
* sr_enable_modes - Modes for which SR(Spatial Reuse) feature can be enabled
* @Min: 0x00
* @Max: 0xf
* @Default: 0x1
*
* This ini is used to check for which mode SR feature is enabled
*
* Bit 0: Enable/Disable SR feature for STA
* Bit 1: Enable/Disable SR feature for SAP
* Bit 2: Enable/Disable SR feature for P2P CLI
* Bit 3: Enable/Disable SR feature for P2P GO
*
* Related: None
*
* Supported Feature: STA/SAP
*
* Usage: External
*
* </ini>
*/
#define CFG_SR_ENABLE_MODES CFG_INI_UINT( \
"sr_enable_modes",\
0x0,\
0xf,\
0x1,\
CFG_VALUE_OR_DEFAULT, \
"To decide for which mode SR feature is enabled")
#define CFG_SR_ENABLE_MODES_ALL CFG(CFG_SR_ENABLE_MODES)
#else
#define CFG_SR_ENABLE_MODES_ALL
#endif
#ifdef WLAN_FEATURE_11BE_MLO
/*
* t2lm_negotiation_support - T2LM negotiation support by STA
* @Min: 0
* @Max: 3
* @Default: 1
*
* This cfg is used to define t2lm negotiation supported value by STA
* If 0 - t2lm negotiation is not supported
* If 1 - supports the mapping of all TIDs to the same link set both DL and UL.
* If 2 - reserved
* If 3 - supports the mapping of each TID to the same or different link set.
*
* Related: None
*
* Supported Feature: STA
*/
#define CFG_T2LM_NEGOTIATION_SUPPORT CFG_INI_UINT( \
"t2lm_negotiation_supported", \
T2LM_NEGOTIATION_DISABLED, \
T2LM_NEGOTIATION_DISJOINT_MAPPING, \
T2LM_NEGOTIATION_ALL_TIDS_TO_SUBSET_OF_LINKS, \
CFG_VALUE_OR_DEFAULT, \
"T2LM negotiation supported value")
#define CFG_T2LM_NEGOTIATION_SUPPORTED CFG(CFG_T2LM_NEGOTIATION_SUPPORT)
#else
#define CFG_T2LM_NEGOTIATION_SUPPORTED
#endif
#define CFG_GENERIC_ALL \
CFG(CFG_ENABLE_DEBUG_PACKET_LOG) \
CFG(CFG_PMF_SA_QUERY_MAX_RETRIES) \
CFG(CFG_PMF_SA_QUERY_RETRY_INTERVAL) \
CFG_OEM_EHT_MLO_CRYPTO_BITMAP_SUPPORTED \
CFG(CFG_ENABLE_RTT_MAC_RANDOMIZATION) \
CFG(CFG_RTT3_ENABLE) \
CFG(CFG_11H_SUPPORT_ENABLED) \
CFG(CFG_11D_SUPPORT_ENABLED) \
CFG(CFG_BAND_CAPABILITY) \
CFG(CFG_PREVENT_LINK_DOWN) \
CFG(CFG_SELECT_5GHZ_MARGIN) \
CFG(CFG_ENABLE_MEM_DEEP_SLEEP) \
CFG(CFG_ENABLE_CCK_TX_FIR_OVERRIDE) \
CFG(CFG_ENABLE_CRASH_INJECT) \
CFG(CFG_ENABLE_LPASS_SUPPORT) \
CFG(CFG_ENABLE_SELF_RECOVERY) \
CFG(CFG_ENABLE_DEAUTH_TO_DISASSOC_MAP) \
CFG(CFG_DISABLE_4WAY_HS_OFFLOAD) \
CFG(CFG_SAP_DOT11MC) \
CFG(CFG_ENABLE_FATAL_EVENT_TRIGGER) \
CFG(CFG_SUB_20_CHANNEL_WIDTH) \
CFG(CFG_OPTIMIZE_CA_EVENT) \
CFG(CFG_CRASH_FW_TIMEOUT) \
CFG(CFG_DROPPED_PKT_DISCONNECT_THRESHOLD) \
CFG(CFG_ITO_REPEAT_COUNT) \
CFG(CFG_ENABLE_BEACON_RECEPTION_STATS) \
CFG(CFG_MGMT_RETRY_MAX) \
CFG(CFG_ENABLE_HE_MCS0_MGMT_6GHZ) \
CFG(CFG_BMISS_SKIP_FULL_SCAN) \
CFG(CFG_ENABLE_RING_BUFFER) \
CFG(CFG_DFS_CHAN_AGEOUT_TIME) \
CFG(CFG_SAE_CONNECION_RETRIES) \
CFG(CFG_WLS_6GHZ_CAPABLE) \
CFG(CFG_MONITOR_MODE_CONCURRENCY) \
CFG(CFG_RF_TEST_MODE_SUPP_ENABLED) \
CFG_WDS_MODE_ALL \
CFG(CFG_TX_RETRY_MULTIPLIER) \
CFG(CFG_MGMT_FRAME_HW_TX_RETRY_COUNT) \
CFG_6GHZ_STD_CONN_POLICY \
CFG_EMLSR_MODE_ENABLED \
CFG_SR_ENABLE_MODES_ALL \
CFG_T2LM_NEGOTIATION_SUPPORTED\
CFG_DIS_VLP_STA_CONN_TO_SP_AP
#endif /* __CFG_MLME_GENERIC_H */