The rx tid setup function is called from multiple contexts.
Acquire lock before calling that function to avoid race condition.
Change-Id: I7a0443e5e09a068301de171afeb4d400bf54b1c8
CRs-Fixed: 3291079
QDF_MAC_ADDR_FMT and QDF_MAC_ADDR_REF must be used
together, otherwise, it will cause build failure
once WLAN_TRACE_HIDE_MAC_ADDR is defined.
Change-Id: Ifb0bce0661a7252940101346f37d4b4387bea4d2
CRs-Fixed: 3292101
Multiple instances of the misspelling "recevied" are present, so
replace them with the correct spelling "received."
Change-Id: Ibd7f4a136541be8aa98f5bee4db7f75af0271f53
CRs-Fixed: 3273526
Maping and unmaping of the MLO DP peer to the partner soc
will be initialized based on architecture.
dp_mlo_partner_chips_map
dp_mlo_partner_chips_unmap
Change-Id: I918f6d552acd9d64086abf4c38f913348e13c381
CRs-Fixed: 3267904
Currently, if mld and link peer has the same mac
address, the peer cannot distinguished with
just the mac address as the search argument.
Hence to support same mld/link peer mac address,
cdp_peer APIs that uses both link and mld peers,
are also given peer_type info. This helps
to perform the operations on the correct peer.
Change-Id: If646755facc8f9a4d9fed2f31c5cc6618fa9a952
CRs-Fixed: 3043428
Support for addition of AST entries for MLO peer event.
Deletion is handled implicitly
Change-Id: Id1caa85370fac847d18dc3bcbecad726bf927d0f
CRs-Fixed: 3251691
Add change to support deletion/cleanup of AST entries on host
for BE platforms(Waikiki) based on peer map and unmap event received
from FW.
Change-Id: I494f7beb572e81cf68cc1cf90864eea0d8125369
CRs-Fixed: 3237943
Add change to support addition of AST entries on host
for BE platforms(Waikiki) based on peer map and unmap event received
from FW.
Change-Id: Ib9a76fd15d18e322b561ce9361d62643289817c4
CRs-Fixed: 3237940
On receiving the peer unmap event the ops
is called without the mac address of the
peer for which peer unmap is received.
Add mac address of the peer for which peer
unmap is received.
Change-Id: I9026433089963818d5a227a0660866ff504dea84
CRs-Fixed: 3238626
To support WDS feature in IPA driver, WLAN needs
to update the ast entry for any new rx packet, and for
end-nodes connected via repeater to root.
CRs-Fixed: 3226348
Change-Id: I7383b12f18e7c70ec06499d66130667eca033131
RX TID HW descriptor is first allocated in setup stage. When
failure case happens, it is got freed. This change adds a
check to make sure it's valid before updating RX TIDs.
Change-Id: I1326315b2eca4c50ef9ff5fa887386de4a796eb0
CRs-Fixed: 3227483
Currently, bandwidth and corresponding MPDU retry threshold was
taken from tx packet status in per packet to update peer stats.
With this change, set bandwidth and MPDU retry threshold
during peer registration.
Change-Id: Iffd06968246d0b86b26716ae6672e2cd23360c67
CRs-Fixed: 3225479
The original BA window size given from CP might > max DP supported,
add sanity check based on HAL target allowed.
Change-Id: Ibadaddeffe65165a89d580d8a5cbf5f7c724c809
CRs-Fixed: 3193852
Set per_tid_basize_max_tid so that BA size is configured per TID.
Accordingly fix dp_check_ba_buffersize to ba_window_size to incoming
buffer_size. Assert for any BA window size above 1024.
Change-Id: I40cb2aac012c50e253c3ef22d44cf5db3abfb7bb
CRs-Fixed: 3182601
In VoIP cases, no or minimal packet drop is expected during
roaming. Currently, data packets are dropped in host if they
are received after roam sync indication from firmware and before
peer map indication is received due to invalid peer.
This change allows rx UDP data packets during roaming before
peer map indication is received from FW if peer's auth_status
received in roam_sync_indication from FW is authorised.
Change-Id: Ic518b7cd0aef48a2b0f8c923a2e20838b07f3d1f
CRs-Fixed: 3168603
Currently, in case where AP advertizes BA window size
which is different than our max supported BA window size,
the HW gets configured for BA window size advertized by
the AP, whereas the ADDBA response indicates the window
size of the STA, which is less than the AP.
This mismatch leads to the BA bitmap to be incorrect.
Fix this by exposing an API from datapath for the update
of the final BA window size which is populated in the
ADDBA response.
Change-Id: I81a039f47a775990b426e9aca1daaaa9bdb6e88f
CRs-Fixed: 3187941
For KIWI, STA AST index lookup search is enabled and remote
AP peer's AST index will be stored in STA Vdev if receive
AP peer htt peer map msg. but if STA TDLS connection happened,
host will receive another peer map msg for remote TDLS STA peer,
this remote TDLS STA peer's AST index will overwrite original AP's
AST index. if TDLS disconnected, STA vdev will still use remote
TDLS STA's AST index for TX, then TX to AP might fail.
Add is_tdls_peer flag in dp peer and configure this value by
cdp_peer_set_peer_as_tdls() from control path right after TDLS peer
created. if is_tdls_peer is true, do not store this TDLS peer's
AST index to STA Vdev, skip bss_peer flag setting as well.
Change-Id: I7b5df1caca6a0b5305a6e867cd92099b5f6a4890
CRs-Fixed: 3151035
Check if ast hash table is populated before accessing it,
as some calls from ecm can try to access the hash table when it
is down
Change-Id: I6d38359c3cf13f578671794db61c8eb845245d6d
CRs-Fixed: 3186437
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
The qcacld driver does not register ol_if_ops callbacks
to handle wds AST request.
Call target if APIs directly to add, delete, and update
the AST entries for the WDS stations.
Change-Id: Ib4d5e1fdd6598e3390dbd2be0f24a72ccf01f202
CRs-Fixed: 3133839
Bifurcate the hal_get_reo_qdesc_size to corresponding lithium
or Berillium platforms.
This can handle difference, if any between them and later enhance
to set the qdesc size based on peer negotiation.
Currently for NON_QOS_TID, the BA window size is hardcoded as
256 for Li and 1024 for Be.
Also modify hal_reo_cmd_update_queue_params to accommodate higher
Block-Ack Window size. For this steal bits from pn_size and use
pn_size values as macros PN_SIZE_XX which is only 3 bits,
instead of 8bits.
Change-Id: If310175da579aa3a47a8b031a1774c6c8982d4b2
CRs-Fixed: 3125986
Flush dp cached frames only for mld peers and legacy peers, as
link peers don't need it.
Change-Id: I19a27c5810a1fec6a62bfe5a6377073dc382fb4c
CRs-Fixed: 3131405
Changes for vdev and pdev stats as per the new peer stats
re-organization architecture.
Change-Id: I48f9fb4b0915c40f4add83f2e2dd074cc97874fd
CRs-Fixed: 3092123
Delay and jitter stats are placed in struct dp_txrx_peer.
Make changes accordingly for allocation, fetching and clearing
operations of these stats.
Change-Id: Ic9b9e48467741072806000f4d1b3aa8e5c65d508
CRs-Fixed: 3092123
* Initialize stats in dp_txrx_peer and dp_monitor_peer as per
the stats re-organization.
* Update peer calibrated stats on every timer expiry of 1 second.
* Define APIs to reset monitor_peer stats and to fetch rdkstats_ctx
from monitor peer.
* Place check to make sure that monitor peer related APIs are
are called only for legacy peer or MLO Link peer.
* Update peer based pktlog flag, tx and rx capture feature flags
in monitor_peer.
Change-Id: Idadbe19e85d4a9fdf77fb6dabe0c8a4952b024b8
CRs-Fixed: 3092123
Move the stats parameters from the dp_peer which are used
in per packet path to txrx_peer
Change-Id: Ieb68b6950740791b37bbd2bfdc4815c3d7bc4834
CRs-Fixed: 3095637
Move the parameters from the dp_peer which are used
in per packet path to txrx_peer and params related
to monitor path to monitor peer.
Initialize txrx_peer and monitor peers.
Change-Id: I0449c67c1cd47deb76bc89b5ddc64174f6694eb0
CRs-Fixed: 3095637
In WIN BE chipsets, replace the REO tid
queue programming in FW via WMI with writing to a
Host managed table shared by HW and SW. REO HW will
pick the tid queue address from the table indexed by
peer id and tid number.
Change-Id: I8107ca5116425538329b11ae3519f02b32573bac
During MLO roaming, first link peer has unmapped REO queue Desc
address due to roaming is in progress, but 2nd link peer still send
stale REO queue Desc address to FW, SMMU fault will be captured if
REO access to this stale REO queue Desc address.
Add roaming in progress and REO queue address check before
sending WMI PEER_REORDER_QUEUE_SETUP_CMDID
Change-Id: Ic868685d98b802fa904ed440cdbb3cef908c6d95
CRs-Fixed: 3101658
Currently is_assoc_link flag in cdp_peer_setup_info just means first
link peer during MLO connection, but usually assoc_link is the
link which initialize MLO association and it will be the primary_link.
this introduce confusion with another flag is_primary_link.
Change it to 'is_first_link' in cdp_peer_setup_info
Change-Id: I8d14da73e6a3bbc39a4a527d6c0aa5667255e995
CRs-Fixed: 3090270
Moving HTT parsing to common file dp_mon.c
Initialize function pointer to stats ind handler for BE
CRs-Fixed: 3071271
Change-Id: I08fb98f8dbed075c3b49baebca399771bfb5077c
In BE architecture, HW provides basic vdev stats support for upto
48 vdevs. For each vdev, there is vdev_stats_id which represents the
id of this vdev on HW. This vdev_stats_id is assigned by host and
is conveyed to HW at the time of REO TID Queue setup for the peer.
Add logic for allocation and deallocation of vdev_stats_id and
convey this id to HW.
Change-Id: If5611bf54d057ccf71c6444b5c79a26eb28df87e
CRs-Fixed: 3067843
DP peer changes required for multi-chip MLO.
This change includes
1) Adding MLO peer to global peer hash at ML context
2) Add ML peer to all partner chips id to objtable
Change-Id: I230a6c1b14484c587b190a9a318fe9ffb1caea11
This force use BA64 ini config is no longer needed, because another
gRxAggregationSize can do the same settings and more flexible.
Change is used to remove this config.
Change-Id: Ie780489849f8b701481a628a9bca2b4112460bd8
CRs-Fixed: 3076982
