Defines the attribute in SET(GET)_WIFI_CONFIGURATION to dynamically
configure NSS.
Change-Id: Iae0db4ce3aef82c2c075095fea6c34731b86e40b
CRs-Fixed: 2708940
Add a QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO with
attributes defined in qca_wlan_vendor_attr_get_sta to get information
for BSS in STA mode or for peer STAs in AP mode. This vendor sub command
can be used to get STA information from driver to userspace.
The attributes defined in enum qca_wlan_vendor_attr_get_sta_info
are used to encapsulate required information.
Change-Id: I9747516de377a2be23cca6023f2e92f014e42ac2
CRs-Fixed: 2591613
The comments for the policy OFFLOADED_PACKETS table do not match
that in the upstream code. Change the comments so that they match
the upstream version.
Change-Id: Ie2a7a3304eb10cc0633070154c581d216fd6e0cb
CRs-Fixed: 2703061
Add an attribute QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO to send
additional information to specify whether the OEM vendor command
is for vdev or pdev.
This optional attribute is used to specify whether the device
type is vdev or pdev. This attribute can be omitted when the
command is for vdev.
Change-Id: Ie6f72d071d1d8393d2c9bf47d7b47a9dd2cbbeed
CRs-Fixed: 2693894
Add an attribute that can be used with
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION vendor command to
configure different PHY modes to the driver/firmware.
Change-Id: I850fd6a1edaa9e74957b9f189c9b710212902781
CRs-Fixed: 2694060
Add a QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC
to add and delete TSPEC in STA mode.
The attributes defined in enum qca_wlan_vendor_attr_config_tspec
are used to encapsulate required information.
Change-Id: Ifaba68b6619a3f6b775d2150740e7d6a2645493c
CRs-Fixed: 2686133
Define QCA vendor attributes for SET(GET)_WIFI_CONFIGURATION to
dynamically configure capabilities for TX A-MSDU and RX A-MSDU.
Change-Id: Idcf7de2172cbf0b6710a7256b925939a2321e91c
CRs-Fixed: 2687224
Add an attribute QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED
to get the response for the queried data.
Change-Id: Icb3fc7072cf589cf60a7c68b7c1fa74e51dadab8
CRs-Fixed: 2699102
Map qpower vendor command to advanced_power_save_mode in order to support
users of HST as well as HSP.
Change-Id: I38de5981dca384b666b5086727e3da741f0cd4e3
CRs-Fixed: 2676713
Currently he operation info is not sent to user space as
part of the response of get station info command.
Add support to send the he_operation with the new vendor
attribute QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_HE_OPERATION.
Change-Id: Ib4bab7b7b2aff688293c85f8574d9f2c306f00f0
CRs-Fixed: 2664347
Add an attribute QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FREQUENCY_2
for describing the secondary 80 MHz span of agile spectral scan.
CRs-Fixed: 2659496
Change-Id: I751513cb248c42dd7c59d7d979fc571459e48ad1
Add QCA_WLAN_VENDOR_CFR_NDPA_NDP_ALL in enum
qca_wlan_vendor_cfr_capture_type. This capture type requests all NDPA
NDP frames to be filtered.
Change-Id: I2003975012ad1c486b18a460c8ef2e691379d3d9
CRs-Fixed: 2649260
Some CFR attributes are used frequently with conditions, so change them
from required to optional.
Change-Id: I835906d314bfb4d94100ba7794603de1c2dbcc8d
CRs-Fixed: 2649263
Enhanced channel frequency response supports to capture channel status
information based on RX. Define previous CFR as version 1 and enhanced
CFR as version 2. If target supports both versions, two versions can't
be enabled at same time. Extend attributes for enhanced CFR capture in
enum qca_wlan_vendor_peer_cfr_capture_attr.
Change-Id: If9a5e387f03981eb75f98138fe555f4489ccb377
CRs-Fixed: 2641774
Add a subcommand for Channel Frequency Response (CFG) Capture
Configuration and define attributes for configuring CFR capture
parameters per peer and enabling/disabling CFR capture.
Change-Id: I94869b06f8e7eb499ebed8d49e99b342907a9aa1
CRs-Fixed: 2647239
Add more hang reason codes for the hang reason in the
QCA_NL80211_VENDOR_SUBCMD_HANG events. This also introduces the
attribute QCA_WLAN_VENDOR_ATTR_HANG_REASON_DATA to carry the required
data for the respective hang reason. This data is expected to contain
the required dump to analyze the reason for the hang
Change-Id: I4912f896d394667055937faf68c9ceb32a469978
CRs-Fixed: 2650292
Add an attribute QCA_WLAN_VENDOR_ATTR_SCAN_DWELL_TIME for specifying
dwell time in the QCA vendor scan command. This is a common value
which applies across all frequencies requested in the scan.
Additionally, update the existing definitions in enum
qca_wlan_vendor_attr_scan to the exact code upstreamed.
CRs-Fixed: 2633010
Change-Id: I09feccc99fb8e53538d495345eda9744e36fc5b4
This attribute enables/disables the host driver to send roam reason
information in the reassoc request to the AP in the same ESS.
Change-Id: Ie2606012c0487936dd0b436f0d6a75d2e115f4b4
CRs-Fixed: 2627261
Add new attributes for getting the Beacon frame IEs and the
disconnection reason codes through get_sta_info vendor command.
Host driver provides this information in STA mode.
Add new attribute to get assoc request IEs of the disconnected
peer. Host driver provides this information in SAP mode.
The host driver shall give these attributes as a response to the
vendor command QCA_NL80211_VENDOR_SUBCMD_GET_STATION.
Add the below attributes in to be in sync with userspace,
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_FAILURE
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_AVG_RSSI_PER_CHAIN
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY_SUCCEED
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_LAST_PKT_RSSI
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY_EXHAUST
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_TOTAL_FW
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY_FW
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_RETRY_EXHAUST_FW
Change-Id: If2727ea4ecbb157035c0f4a989a1a936a5bca64c
CRs-Fixed: 2624843
This acts as an event from the host driver to the user space to notify
the driver specific reason for a disconnection. The host driver
initiates the disconnection for various scenarios (beacon miss, Tx
Failures, gateway unreachability, etc.) and the reason codes from
cfg80211_disconnected() do not carry these driver specific reason codes.
Host drivers should trigger this event immediately prior to triggering
cfg80211_disconnected() to allow the user space to correlate the driver
specific reason code with the disconnect indication.
Change-Id: I6337c02a3508c7ce282f0e3e947d7592e8550308
CRs-Fixed: 2624841
This attribute aims the STA to send the Beacon Report response
with failure reason for the scenarios where the Beacon Report
Request cannot be handled.
Change-Id: I1b57d1c810deee4545c9a3b84b45ab5bd539d9bb
Crs-Fixed: 2622023
This acts as a vendor event and is used to update the information
of a station from the driver to userspace.
Add an attribute for the driver to update the channels scanned in
the last connect/roam attempt.
Change-Id: I3e87292d6ef00c0242cb583183de2b441352c8a5
CRs-Fixed: 2622092
Add an attribute QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY_FREQUENCY for
primary channel center frequency in the definition for Representative
Tx Power List (RTPL) list entry instance. This is required for 6 GHz
support, since the 6 GHz channel numbers overlap with existing 2.4 GHz
and 5 GHz channel numbers thus requiring frequency values to uniquely
identify channels.
Mark QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY as deprecated if both the
driver and user space application support 6 GHz. For backward
compatibility, QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY is still used if
either the driver or user space application or both do not support the
6 GHz band.
Change-Id: I71c60aa9512bd183eaf73e1bffa57cab0d5b40c5
CRs-Fixed: 2612147
This change introduces the vendor event
QCA_NL80211_VENDOR_SUBCMD_REQUEST_SAR_LIMITS_EVENT.
Host drivers can request user space application to set SAR
power limits with this interface.
Change-ID: I15cf651c722bf828ba9012d81d99922c39a9e1fc
CRs-Fixed: 2615364
Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
to implement thermal mitigation. Different operations required to
implement this feature can be specified in
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE,
QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL.
Userspace requests the driver to enable/disable thermal mitigation
based on the thermal state of the device and wlan host performs the
required appropriate action. wlan host driver maps the thermal level
provided from userspace via vendor command to corresponding duty
cycle off percent value and duty cycle value,send
WMI_THERM_THROT_SET_CONF_CMDID cmd to FW.
Make changes to perform vendor command handling, mapping thermal level
to duty cycle value and communicating the thermal information to FW.
Change-Id: Idc9c87dcb4275122980713471544baa23e705a53
CRs-Fixed: 2610403
Currently use of comamnd QCA_NL80211_VENDOR_SUBCMD_OEM_DATA
is to pass data blobs from Application to FW but there is
no mechanism to send the data blobs from FW to Application.
To meet the above requirement update the usage of existing
OEM DATA command to use it as a vendor event as well to
send data blob from host to Application.
Change-Id: I8df98f850f4dd56f55dba43c5364a52c425ba9ed
CRs-Fixed: 2573468
To config BT coex chain mode, add a new QCA sub command
QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE.
This new command has two attributes:
1. QCA_VENDOR_ATTR_COEX_BTC_CHAIN_MODE: u32 attribute. Indicates the
BT coex chain mode, are 32-bit values from enum qca_btc_chain_mode.
2. QCA_VENDOR_ATTR_COEX_BTC_CHAIN_MODE_RESTART: flag attribute.
If set, vdev should be restarted once BT coex chain mode is updated.
Change-Id: I5ae36286a865ca1459550b0a5cf538bf42b8ffa5
CRs-Fixed: 2534770
Add vendor command QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT
and attribute qca_wlan_vendor_attr_avoid_frequency_ext to send structured
avoid frequency data.
This new command is alternative to existing command
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY since existing command is
using stream of bytes instead of structured data using vendor attributes.
Change-Id: I20c4836f9dd36f2e11e70a5b892db469a14c3746
CRs-Fixed: 2533156
As a part of P802.11ax amendment, 6 GHz band operation is added.
Since the 6 GHz channel numbers are overlapping with existing 2.4 GHz
and 5 GHz channel numbers, use frequency to identify unique channel
operation instead of channel number. Channel frequency is unique across
bands.
In the existing QCA vendor interface, wherever missing, add frequency
attributes to identify unique channel operation. In addition, add
comments to document some of the previously missed attributes/values.
Note: If both channel and frequency attributes are present in vendor
command/event and
(a) If both the driver and user-space application supports 6 GHz band
then channel related attributes are deprecated and use frequency
attributes.
(b) If either driver or user-space application or both doesn't
support 6 GHz band then use channel attributes.
Change-Id: I1d4f195ae0afb2b7822a0879f3b03291de72202d
CRs-Fixed: 2533114
Add a QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE with
attributes qca_wlan_vendor_attr_add_sta_node_params to add STA peer
entries in AP mode. This vendor sub command is used in FT roaming
scenario to send STA node information from application/service to
driver/firmware. The attributes defined in enum
qca_wlan_vendor_attr_add_sta_node_params are used to deliver the
parameters.
Change-Id: Ie09a984bace6710a2801f1a6479124288e42f10f
Some chipsets don't have the capability to run agile spectral scan with
160/80+80 MHz modes. Add separate agile spectral scanning capability
flags for 160, 80+80, and non-160 MHz modes to cover such cases.
CRs-Fixed: 2545712
Change-Id: I57b5c4742e2042a9ee19fb2876b8054ad7cd890f
Currently extscan vendor config params are defined under
EXTSCAN feature flag but are getting used for the vendor command
get valid channel list which is independent of EXTSCAN feature.
To resolve above issue move extscan vendor params out of
extscan feature flag.
Change-Id: I049fbc8cdc97f51aa1e390a488074572d5276299
CRs-fixed: 2524535
This enhances the existing vendor command QCA_NL80211_VENDOR_SUBCMD_ROAM
with the following configurations:
1. Set/get/clear roam control
2. Set/get the channels on which the roaming has to be triggered
3. Set/get the roam scan period
4. Configure the triggers for roaming
5. Configure the candidate selection criteria
Change-Id: I75bad835c501d86fa4b2f0e8fcadf8af5b17daca
CRs-Fixed: 2508279
qca_wlan_vendor_attr_roam_subcmd is an enum associated with the
attribute QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD. It represents
different sub command values and these are not the attributes.
Hence, rename the enum to qca_wlan_vendor_roaming_subcmd.
Accordingly, the members of this enum are also renamed to
suite the usage.
Change-Id: Idbc80bf084ff293402fa2de368bc91b4fc659f01
CRs-Fixed: 2508204
Add attributes QCA_WLAN_VENDOR_ATTR_CONFIG_ELNA_BYPASS under
the enum qca_wlan_vendor_attr_config to support set and get
the ELNA bypass.
Change-Id: I6f0816f4fab80ece713b73eacf03c7c82dd7f286
CRs-Fixed: 2477327
Currently ext scan is enabled by default in driver which
is increasing driver size significantly and ext scan
is not getting used anymore.
Disable ext scan with feature flag CONFIG_FEATURE_WLAN_EXTSCAN
to reduce driver size and fix related compilation issue.
Change-Id: Id2344e6ed21caefa459773bb6e891ffb1e70cb92
CRs-Fixed: 2491455
Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_OEM_DATA
with attributes qca_wlan_vendor_attr_oem_data_params to support
OEM data. It is used to send OEM data binary blobs from
application/service to firmware. The attributes defined in enum
qca_wlan_vendor_attr_oem_data_params are used to deliver the
parameters.
Change-Id: I05ce91345c60ca8d194e70549608530e3ee8ec41
CRs-Fixed: 2477322
Add a new vendor attribute QCA_WLAN_VENDOR_ATTR_DISCONNECT_IES
to configure disconnect IEs to the driver. Driver shall fill
these IEs in disassoc/deauth frame.
These IEs are expected to be considered only for the next
immediate disconnection (disassoc/deauth frame) originated by
the DUT, irrespective of the entity (user space/driver/firmware)
triggering the disconnection.
The host drivers are not expected to use the IEs set through
this interface for further disconnections after the first immediate
disconnection initiated post the configuration.
If the IEs are also updated through cfg80211 interface (after the
enhancement to cfg80211_disconnect), host driver is expected to
take the union of IEs from both of these interfaces and send in
further disassoc/deauth frames.
Change-Id: I3fd6e8e37d4282bceef44054d883d214d2a2825c
CRs-Fixed: 2482021
The driver automatically starts beacon reporting if it pauses the beacon
reporting for any reason other than disconnection. In specific cases,
userspace may not want the beacon reporting to be automatically resumed
after a pause. Add interface support for userspace to specify driver not
to start beacon reporting automatically after a pause.
Change-Id: Ia649bc7c7bd7dfe2ae106daecfaf96368151f89b
CRs-Fixed: 2471641
Add the following vendor attributes under the enum
qca_wlan_vendor_attr_spectral_scan to support the configuration of
Spectral DMA debug.
1. QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_RING_DEBUG
Enable/disable debug of the Spectral DMA ring
2. QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_BUFFER_DEBUG
Enable/disable debug of the Spectral DMA buffers
CRs-Fixed: 2466432
Change-Id: If61ecb085534cbde5410c5a2b91aa1922579d902
Add QCA vendor attributes to spectral scan related vendor commands to
support agile spectral scan.
CRs-Fixed: 2466336
Change-Id: I855389a1839d70478a55ff7bd386e196fa3988dd
