Change adds support for enabling splitlink sublinks video data swap.
Change-Id: I731b85a5e8fe8638005433819957dd0658f72963
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Clients of dsi driver can register to be notified of panel id
information. Dsi is probed early during the device boot-up. If the panel
id is available with dsi driver none of the clients have registered
that early. Once clients probe and they register with the dsi driver
panel id is not passed onto clients until power on of the dsi. Change
adds support to notify the dsi clients during registration if panel id
is valid.
Change-Id: Ic475060cbec5f5b645aed865939fffe66aef071b
For Demura continuous splash hand-off, the DTB must already have
a definition for a demura panel ID. This is necessary
as ABL currently only updates this node and will not add it in
if missing.
Introduce special handling to identify a panel ID of 0 as a dummy
node, and set all invalid cases to the panel id ~0x0.
Change-Id: I70315c1b32cce9bcd2f6142515f2355a489d470b
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Previous design had the demura panel ID passed in on the Linux kernel
command line. Update the DSI driver to read this information from the
DTSI instead.
Change-Id: I7697bb34a313f1837b80ba5ff78e720e8131a819
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
PLL codes from devicetree are only required if dynamic clock is enabled
for video mode panels. This change ensures that unnecessary error logs are
not seen for all other panels, by parsing the data only if the panel property
is set.
Change-Id: I206520aab65b7a5613909c8ff527e88303533617
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
The DMA buffer allocation for DSI happens during the first
command transfer. This change moves this allocation to happen during
bind.
Change-Id: I7969a019a8b84282e8a153f5393c9a3de5a28043
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
The maximum value of backlight scaling property is enlarged
from 65535 to U32_MAX. Change supports DRE feature to
increase backlight level through backlight scaling property.
Change-Id: Ibe929308faf8c6f94bacbec7f58cc4ffe8133a85
Signed-off-by: Xu Yang <yangxu@codeaurora.org>
HW recommendation is to park the DSI byte clock and pixel clock at XO
before turning them off. The change parses XO from the DT and sets the
clock source as XO while turning off the PLL.
Change-Id: I788951d6341149300e80e8db4a5a3fd2c4eb3e03
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Change removes the use of custom MSM DSI flags that will not be
available as part of GKI.2.0
Change-Id: I2337a54b1d6346ebdc18e9e6c3c8e7a07f421bdd
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Use of drm_display_mode vrefresh is being deprecated in
upstream DRM framework. Downstream driver need to use
drm_mode_vrefresh API from now on.
This change removes dependency on drm_display_mode vrefresh
and replaces it with drm_mode_vrefresh API in SDE, DSI and
DP driver. In addition, it also modifies drm_display_mode clock
to align with upstream approach where an uncompressed mode clock
is required to match drm_mode_vrefresh API.
Change-Id: Ie972a2e140adfd81c4e68df8e7bc69feaaca22e1
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Update panel commands to support panel operating mode switch in
one timing node.
Change-Id: Ieb8303cebe78c699dfd5f274830418e87655ff56
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Expose panel mode from kernel to SDM with SDE connector property
CONNECTOR_PROP_MODE_INFO and set panel mode from SDM to kernel
with SDE connector property CONNECTOR_PROP_SET_PANEL_MODE for
avoiding private change in upstream code in QGKI kernel.
Change-Id: I0629dad9399967cc1118ac02ce30597076ca367d
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Change avoids clock framework APIs to configure the DSI PHY
PLL. It follows HW recommendation to set the byte and pclk
dividers.
Change-Id: I8c110f3997e4ec4c2eaa28778b70091855725ab8
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Commit 62afb4ad425a ("drm/connector: Allow max possible encoders
to attach to a connector") enables additional encoders per
connector through use of a mask rather than encoder ids.
This change updates the driver when looking for an encoder
for the connector to look through the list of all possible encoders.
Change-Id: I69cc7c38cd0a9842ed2f15712feeb3c6b88daadf
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Commit 2b07021a940c ("debugfs: remove return value
of debugfs_create_u32()") removes the return value
from debugfs_create_u32. This change updates the msm
driver to remove cehcks on this return and corrects
for unnecessary line wraps.
Change-Id: I8d50dd7168921edfb2d5edad13941f91117d3c30
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Commit a25b988ff83f ("drm/bridge: Extend bridge API to
disable connector creation") and commit ee68c743f8d0 ("drm: Stop
including drm_bridge.h from drm_crtc.h) add additional input flags.
This change adds fixes to the drm bridge attach API and includes
relevant drm_bridge header files.
Change-Id: I85e84eaff7df2995243896108a217fae81716b63
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Commit 05193dc38197 ("drm/bridge: Make the bridge chain
a double-linked list") creates a bridge chain linked
list. This change updates the relevant changes to msm
driver to use the list to find the bridge associated to
the encoder.
Change-Id: I59eb2910be96f4fff7bdbeb040d6ad204c41d747
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Commit 12c683e12cd8 ("drm: bridge: Pass drm_display_info to
drm_bridge_funcs .mode_valid()") passes the drm_display_info to
mode valid. This change updates relevant changes to dsi display,
that will make it available during bridge validation.
Change-Id: I2772e9e3920de940f22341be5019213d562352ff
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
As per the HW requirements it is highly recommended to use DMA start
window to trigger broadcast commands. If not used then it can
result in a hardware hang with the DSI controllers going out
of sync. This behavior is even more prominent in cases of higher
refresh rates. As part of the change we change the default DMA
scheduling behavior to default to maximum possible DMA window
in case it is not specified in the panel device tree.
Change-Id: Ied4df9063664cedbc18ce009054d4e5ecae30ab2
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
The rechecks count in dsi_display_status_check_te defines the
number of times the TE status needs to be checked before exiting.
Avoid the execution if rechecks is set to zero as it would avoid
unnecessary irq status changes.
Change-Id: Ice31701ac06f5b0a82f29b5f415dcb0b055e7b16
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add check to avoid the dsi panel status check with TE
method as the GPIO support is not available in Trusted-vm.
Change-Id: I5ad6e7b77b189b5150302ab34767dfc4d97aaf61
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add support to trigger ESD through debugfs by directly
modifying the reset GPIOs TLMM register in trusted-vm as GPIO
driver support is not enabled.
Change-Id: I859affe69c13dbe115a48b0a63a600a57027db58
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Change clears the DSI TX command buffer allocated for debugfs
command transfers and destroys the command packets in case of
error during command transfer.
Change-Id: Ia1e822b9b60d44f7eba325116d416916419471fa
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
The change batches DSI commands sent using the debugfs node, in a
separate buffer from the TX command buffer to ensure that they are not
triggered before the last command bit is set. Once the last command
bit is set the buffer is then copied to the DSI TX buffer and triggered.
Change-Id: I9ba624e4e19341696a974994817603315c6c8a45
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Currently, changing panel configuration from firmware approach is present
for single display. This change adds support for secondary display using
firmware approach.
Change-Id: I8095dceed1567d8582c7473c0ac7f59c4666a200
Signed-off-by: Lipsa Rout <lrout@codeaurora.org>
In current implementation qsync min fps is single value.
It is same for all the list of supported dfps list.
Added support for new dt entry dsi-supported-qsync-min-fps-list
corresponding to the fps supported in the dfps list
dsi-supported-dfps-list.
Change-Id: Ifd5309c2f51865a3c0d9fadb65cbcd291b6ef42b
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
This change adds support to have same panel names for dual displays.
Without this change, the secondary panel bind will fail if it has the
same panel name as primary since the primary panel debugfs directory
would have been created during its display bind and when display bind
for secondary panel is initiated with the same name it will try to
create a debugfs directory with the same name resulting in bind failure.
This change appends a string as secondary in the panel name and creates the
debugfs directory.
Change-Id: I2bd25672ce0105a3b8225bbf17e13d4e373ad10b
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Currently, in firmware approach, the panel node is null
for secondary display. As a result, the number of display
remains one, in case of dual display also. This change
updates the number of displays.
Change-Id: I4b945b8b94d931e0dedf7ca7b27cb1a288b9d6ab
Signed-off-by: Lipsa Rout <lrout@codeaurora.org>
For phy ver 4.0 chipsets, configure DSI controller and DSI PHY to
force clk lane to HS mode always. This change was missed while
propagating from 4.19 to 5.4.
Change-Id: I60370034f7b9ed5d036d9d22f0807250afbcbcd5
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Change decreases logs during a mode set in dsi_display and adds the
info to event logs.
Change-Id: I3bbe328f942008004c15b39230dd8be3e4cb64b5
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
The file operation write expects a non zero return value for a
successful exit from the file op.
Change-Id: I5e956333f39c33708ba24e2722713484c613f0ee
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Enure that ESD check doesn't result in a false negative while
booting up with a simulation panel or if TE based check is enabled
and panel switches it operating mode to video.
Change-Id: I62ff088f513d28d2883ce5a6d22f8bac1783fcd2
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
