A framework is added where the filters for every
mode are stored on a radio instance. Whenever a mode comes
up, it stores the filters in the radio and calls a
common API which iterates through all the enabled
mode filters and loops through them to create a
superset of filters which is sent to HTT.
This framework can be extended for new feature addition
which set filters for the monitor status and monitor
destination rings.
Change-Id: I9b739af2086bbe261b65c57af0a5bd867294f30f
CRs-Fixed: 2585872
pdev_id and mac_id were incorrectly passed
as arguments to dp_get_lmac_id_for_pdev_id
Fix passing the arguments in right order to
the API to access appropriate lmac_id
Change-Id: I42773a6ccae2f87f128d3c462e6a332fe658f45e
CRs-Fixed: 2611926
Replace QCA_WIFI_QCA8074_VP with CONFIG_WIFI_EMULATION_WIFI_3_0
since VP platform is not being used anymore.
Most of the parameters present inside QCA_WIFI_QCA8074_VP are related
to emulation timeouts. Hence replacing it with a more meaningful flag.
Change-Id: I22a0e5803e765333947f1613b376dcc6bd25b5af
AST entry delete logic has some conditional checks making code with respect
to HTT V1 and V2 messages making it tough to follow.
Change-Id: I229324446134b32021a956fb689e4726256fcc28
Add a framework to configure varying buffer size for both data and monitor
buffers.
For example, with this framework, the user can configure 2K SKB for Data
buffers, monitor status rings, monitor descriptor rings, monitor
destination rings and 4K SKB for monitor buffers through compile time.
Change-Id: I212d04ff6907e71e9c80b69834aa07ecc6db4d2e
CRs-Fixed: 2604646
Lithium HW can parse each MSDU when packets are enqueued to transmit
classifier and each MSDU can get enqueued to different MSDU-Queue.
By default, there are 2 queues per TID – UDP and NON-UDP. Based on
the flow parsing, packets will be queued to either of them.
Enterprise customers uses RAW mode frames which transmit classifier
would not be able to identify L4 protocol for UDP or NON-UDP queue
for encrypted frames.
Customer can also have different application based packets which needs
to be enqueued to differently prioritized queues. They can choose to
tag each MSDU based on application DPI and derive the flow priority
as below –
• UDP
• NON-UDP
• HI-PRIO
• LOW-PRIO
Customer needs API support from host which will provide an ast-index
based on a particular flow id given peer mac address. Based on the mac
address, host will find the associated peer and return the ast_index &
cache set number corresponding to the flow id from peer flow based ast
entry table. Customer will then program this ast-index and ast override
in transmit classifier CMD ring to enqueue MSDU to a specific
flow-queuein TQM.
Host API:
Input parameter – uint8_t *peer mac address, uint8_t flow id
Output – uint16_t ast_index
Change-Id: I79557c31532514ad5ec0c1848827a3e5cd91cdf2
Use lmac_id to get the rx_desc_pool while freeing
the rx_desc_pool for rx_desc_buf.
Change-Id: I549e7f54b267d2c82dceb391a766297dfe18ceb7
CRs-Fixed: 2608209
Ensure monitor mode interrupt masks are set as they are DP_INTR_POLL
type. Move wlan_cfg_fill_interrupt() call to inside dp_soc_attach as it
is called before dp_soc_init.
Change-Id: Id9c49e3ed5c01e7c1bf641fa4c2f419d31381608
CRs-Fixed: 2608683
Incorrect size is given while copying pdev stats.
Fix this by properly passing pdev stats struct
while calculating size of pdev stats.
Change-Id: I4b4be2542d092c5c984252a62e2406cb1e83bcd8
CRs-Fixed: 2603674
Provide an API to fetch required individual peer stats
from the data path peer stats instead of copying the
whole peer stats structure.
Change-Id: I1c9619bc7d9bb0e3e3df6d38cc5f4570869e31fe
As part of Dynamic mode change feature, rxdma_mon_status_ring
has been moved from dp_pdev to dp_psoc. Adapt CFR to this change.
Dynamic mode change feature change -
Ib017d49243405b62fc34099c01a2b898b25341d0
Change-Id: I43ee4e08ad70614d042be3e08c0add66e7e011f9
CRs-Fixed: 2606001
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
Also remove the ops which are used to store
and retrieve such handles, that no more needed.
- register_peer
- clear_peer
- change_peer_state
- peer_get_ref_by_addr
- peer_release_ref
- peer_state_update
- get_vdev_by_sta_id
- register_ocb_peer
- get_peer_state
- get_vdev_for_peer
- update_ibss_add_peer_num_of_vdev
- remove_peers_for_vdev
- remove_peers_for_vdev_no_lock
- copy_mac_addr_raw
- add_last_real_peer
- is_vdev_restore_last_peer
- update_last_real_peer
- peer_detach_force_delete
Change-Id: I4a41211464a30e018e8b73b8e9b91c7a509327b4
CRs-Fixed: 2541711
Currently cdp ops are given pdev/vdev handle
as its arguments, which is directly accessed
in those APIs. This can cause a race-condition
in access of the respective handles if it has
been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id/vdev_id which will be used to get the
respective handles, and hence avoiding unwanted
access of the handles if it has been deleted.
Also deleting few ops which stores and retrieves
such handles and adding ops to set/get pdev params.
- txrx_get_psoc_param
- wdi_event_sub
- wdi_event_unsub
Change-Id: Id089d9b6b4737d700d2436e2081291a3741affb5
CRs-Fixed: 2541658
Change set 2 of ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I3f180c9c360d564f0b229b447074ad23b7c0a737
Change set 1 of the ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: Iedf6dea2215d3d04b2212c71c8ec8c7328c559e8
Since delete in progress for peer is set in roaming cases
explicitly, do not return from peer teardown after checking
this flag.
Change-Id: Icc514d9500075409d907546a26b2725b5334cbce
Add the datapath changes for supporting
the newly added IPCI bus type for QCA6750
CRs-Fixed: 2597326
Change-Id: I27e3e9f746eb383e85c7345150bda03320d041b9
multipass_rx_pkt_drop is peer level stats counter
used to count multipass rx packet dropped frame.
Accumulate this counter at vdev and pdev level.
It also initializes multipass_en flag to false at
vdev attach.
Change-Id: Idaa85a71c80eefb9359abb026402b71aa28ad6a2
CRs-Fixed: 2595551
1. Move all LMAC rings to SOC from pDEV
2. Dynamically obtain lmac->pdev mapping while handling LMAC interrupts
Change-Id: Ib017d49243405b62fc34099c01a2b898b25341d0
Add monitor mode support to capture packets over 6GHz frequencies by
getting capture frequency from pdev.
Change freq type to qdf_freq_t.
Change-Id: I7b6edc43e254dc98a3c2939c369874bec9d16ddd
CRs-Fixed: 2568970
No need to protect with vdev list spin lock for dp_rx_vdev_detach and
which might wait event from dp rx thread when doing the RX GRO flash.
Do the same for dp_tx_vdev_detach.
Change-Id: I8f191ed62a174a9a88999c36d47ef18f39e8bd82
CRs-Fixed: 2600680
Add code to process lmac rings in polling.
Lmac rings can be switched between polling and interrupts
by using lmac_polled_mode flag in dp_soc.
Change-Id: I231e906930c9b42100a2df3e52acac97deba1c34
Created a new interrupt mask for msi chipsets so that both ahb
and pci chipsets can work together.
Change-Id: I78d1b9641e58f07d1582152c691c5ae29e6ddb03
Setting interrupt mode in dp_soc_init as setting it in
dp_soc_attach is resulting in interrupt mode not set on
subsequent wifi down/up. soc_attach is called only in case
of wifi unload/load and not in case of wifi down/up.
Adding interrupt mode setting in soc_init helps in setting
correct interrupt mode in case of wifi down/up.
Change-Id: I9e6ad94e42b7bc2bf84f832ece8dc8779e335905
If two back to back HTT msg sending happened in short time,
the second HTT msg source SRNG HP writing has chance to fail,
this has been confirmed by HST HW.
For monitor mode, HTT msg for monitor status ring configuration
is the last msg for sending, if the 2nd HTT msg for monitor status ring
sending failed, HW won't provide anything into 2nd monitor status ring.
as a WAR, add some delay before 2nd HTT msg start sending, > 2us is
required per HST HW, delay 100 us for safe.
Change-Id: Id2a5a8798fde79267f9d6f9ba23d8ed54a400aa7
CRs-Fixed: 2597248
Currently in lithium FW is not always in datapath. As a result
can not provide all the wlan vendor extended stats. So as part
of this host provides some of the extended stats.
Change-Id: I876b6e905f7e25b7088f80f07e55e26a7a409241
CRs-Fixed: 2594797
Channel Frequency Response(CFR) captures FFT bins corresponding to a PPDU
received and this is relayed to user space application. Since FFT bins
alone will not be meaningful, additional information about the PPDU such
as Peer addr, BW, NSS, etc are extracted from multiple PPDU status TLVs
and passed on to userspace along with CFR data.
Host RX monitor status ring is configured during CFR enable and the host
subscribes to relevant PPDU TLVs that provides all necessary information
for CFR data correlation.
Change-Id: Ia8080fe96c330db42d371634ba4363eb36c05402
CRs-Fixed: 2593416
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- txrx_peer_unmap_sync_cb_set
- txrx_fw_stats_get
- txrx_get_ctrl_pdev_from_vdev
- txrx_get_mon_vdev_from_pdev
Change-Id: I4472dc0905edb7700acb4401b117c8876ba455f3
CRs-Fixed: 2541460
Change cmn_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I5716a87cad56b1dfe8dd56f193bbb6ff923a6af1
Memory is freed and allocated only during
wifi load and unload in case of WIN and not
during wifi up/down
Calling dp_tx_soc_detach unconditionally
was leading to memory free in wifi down
path and when wifi up was issued the
memory which was freed was never allocated
Call dp_tx_soc_detach conditonaly only for
MCL in dp_soc_cmn_cleanup and for WIN in
dp_soc_detach using dp_soc_reinit flag which
is set for WIN during wifi unload
Change-Id: I9da34f7945d65a34e719c7db58da13e85ae3d228
Change cdp_host_stats_ops, cdp_wds_ops, cdp_raw_ops
and cdp_pflow_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle.
Change-Id: Ia956882535cc04e57a006905d46ccfe9d95bb731
Reset ba_status to inactive irrespective of tid update status to make
sure the ba_status reset successfully.
And also use pe_err_rl instead of pe_err to avoid excessive logging.
Change-Id: Ifc6adc166b5093742b34dd7d74924f9d54146ea4
CRs-Fixed: 2577663
crash scenario:
a. pktlog is enabled, the timer mon_reap_timer is active,
reap mon_status_ring hal desc periodically.
b. rx_desc status pool is freed in dp_rx_pdev_mon_detach() when do
dp_pdev_deinit() while the mon_reap_timer is still active until
dp_rxdma_ring_cleanup() free it.
c. during the timeslot between dp_rx_pdev_mon_detach() and
dp_rxdma_ring_cleanup(), if some hal desc is pending to be
processed on mon_status_ring, invalid accessing to rx_desc_status
pool happened.
solution:
if pktlog is enabled, stop mon_reap_timer ahead of
dp_rx_pdev_mon_detach() in dp_pktlogmod_exit().
Change-Id: I91b16a88a5e4390587925d6eb2840b3ec1ec2187
CRs-Fixed: 2579817
Crash scenario:
a. monitor mode dp_vdev is freed in dp_vdev_detach_wifi3 without
checking whether any dp_peer is associated.
b. monitor mode self dp_peer do peer clean up when HTT peer
unmap MSG received, invalid accessing to dp_vdev as it has been
freed in step (a).
Check if there is dp_peer associated for monitor mode dp_vdev,
skip dp_vdev free, when all dp_peer is freed, dp_delete_pending_vdev
will free dp_vdev.
Change-Id: Iea4b0efc6e7bbd4109d9cd0b109dfddf727a9fff
CRs-Fixed: 2576604
Local peer_id is being cleaned up across DP, HDD and PS/WMA.
So, any references to local peer_id/sta_id will be replaced
by peer mac address and all interactions between the layers
will be based on peer mac address.
Cleanup local peer id usage from DP APIs.
Change-Id: I930e1c6a09092a373c093239632d6f310fee18e2
CRs-Fixed: 2529041
Local peer_id is being cleaned up across DP, HDD and PS/WMA.
So, any references to local peer_id/sta_id will be replaced
by peer mac address and all interactions between the layers
will be based on peer mac address.
Cleanup unusued DP APIs which are based on local peer_id.
Change-Id: Idd95bc640ca7e36a427be7202935034d4ed58979
CRs-Fixed: 2529026
Remove pdev and vdev control path handles from data path.
Instead send pdev_id and vdev_id along with opaque soc
handle in ol_if_ops.
Change-Id: I6ee083f07e464f283da0d70ada70a4e10e18e1b2
