* Update the pkt_type counters correctly within the array bound
* Add support for NSS counters on Tx side
* Update ampdu flag in PPDU struct
* Add support for ampdu flag in hal_ppdu struct
Change-Id: I79ea52727124ea4be4d82912cb2513ea58e2af10
Sending all frames to firmware will have high throughput impact.
Queue mesh frames also to TCL/TQM and send cloned frame to firmware
only if meta header information is changed to update meta header
information. Increased meta info size as per new ext2 header.
Change-Id: I89ff27994477a5637979a9cd6a397286144b2535
CRs-Fixed: 2162643
Tx ME descriptors used for Tx Multicast enhancement are not freed
in pdev detach path causing memory leak. Fix this by freeing
them in pdev detach path.
Change-Id: I902e7a829495871e3d0013a9942f86c02bbba80e
CRs-Fixed: 2168524
The kernel panic is seen because wrong variable was used , and this
variable was getting de-referenced without initialization.
Fix this by using the correct variable
Change-Id: I1f03c724f3ecba44a8ce0bc94242f2acafa5649d
CRs-Fixed: 2166423
Send control packets as mcast even though snoop entry is not found
instead of dropping the frame. These control frames include IGMP/MLD
frames that is required to add the snoop entry.
Change-Id: If905b54e2ae9eaa3943428b36b1b894bcd528785
CRs-Fixed: 2133270
Both process_tx_status and process_rx_status is disabled for the
default setting. Enable those flags by default for MCL
CRs-Fixed: 2146734
Change-Id: I8c5a636badcfe9327fce7f3332abd93946f003bd
Add following changes in the context of PPDU stats
1. Mirror copy mode enhancements
2. Fix memory leak due to mgmt. TLV
3. Reset RX monitor lite ring when enhanced stats disabled
Change-Id: Ifb260929290bc483dc05b152a11cd675104f3a0d
For RAW Mode AMSDU when multiple fragments will come
address for first fragment getting updated but other
fragments were not getting updated properly.Fix updated
all the fragment address.
Change-Id: Ie450bcd4e467cca779d0280d76ce7b4ace1dffc2
Add support to display multicast packets stats. Also
avoid sending message to target-if layer for every MSDU
to update node statistics
Change-Id: I7bb73d97bd8a02a601d191040a9a5730a9584d3d
Enable or disable TCP\UCP checksum offload for TX according
to the flag in wlan cfg module, which is determined by INI
(MCL) or initialization setting(WIN).
CRs-Fixed: 2155236
Change-Id: I0e30fc062a000c2d9c47674fe80da59a2ac0de51
Host CCE Classification changes for RAW Mode workaround
RAW Mode EAPOL frame classification for raw mode
Change-Id: I533c2e8bb55e3cd5088c6bff046e67066c784053
CRs-fixed: 2132295
There is a hard-coded AST type number used for DP path, which will
cause poor readability. Fix this problem by using a pre-defined
constant type value.
CRs-Fixed: 2142975
Change-Id: I3520970bf59ea7152a0851cfdc3b8e7943ddbc19
Add WDS tx/rx policy checks in Tx and Rx datapaths.
In Rx path, check packets against rx policy configured
In Tx Reinject path, checks are to process or drop 4-addr/3-addr packets
to peers decisively
Change-Id: I0a6c01b7555fa5d369ab2c9baf454d49808857fc
Add support for following node statistics for Lithium DP
1) Number of Tx unicast MSDUs and bytes
2) Last Tx and Rx rate
3) Excessive retries per AC
Change-Id: If533df25e5299bf399bed85ace99763aab74134e
Host CCE Classification changes for RAW Mode workaround
H/w CCE hangs while classfiying raw packets
so the classification is moved to host
Change-Id: I75cfc6b140a7983fcdfb797c93b9fd57f01c5ee3
Provision to send first MSDU of a PPDU to upper layer based
on PPDU ID received in RX monitor lite ring.
FR 42926
Change-Id: I6daed9382b57fb3355ec6453e0609085cc7b9bb0
CRs-Fixed: 2127108
Provision to send first data frame of a PPDU to upper layer, based
on PPDU ID and peer ID received in MSDU TX completion indication.
FR 42926
Change-Id: Ifac443b1d56d3e91cd72d1868f253ca10beae8ee
CRs-Fixed: 2127108
Multicast frames in NAWDS mode causing flood of packets between the
nawds enabled AP's due to continuous sending of mutlicast frames received
from another AP and vicevera.Resolved the issues by droppping the 3
address Multicast frames and 4 address multicast frames with sa_peer
same as tx_peer.
Change-Id: I5edbcb060720510eb6ea5f5ffd46402535ba6748
CRs-Fixed: 2130039
Remove excessive failure logs. We have stats when we fail to get
the tx descriptor and drop packet. So do not log tx descriptor
unavilability failure.
Change-Id: Ia3d929048545ebcd05b52d0819a818cc09878e97
CRs-Fixed: 2128380
In DP Transmit path, 32-bit variables are being used to store paddr.
This will not work for 64-bit systems.
Address this by making them 64-bit variables.
Change-Id: I4c146649773cfd9bdc636187cb35d9d776bf072f
CRs-Fixed: 2142458
Fix transmitter MAC address, which is being appended
to MSDU payload when tx packet capture is enabled.
Change-Id: Ic5bd3eab434125e9e4278e1e7af3ec47b7b3698f
CRs-Fixed: 2142085
Move peer stats updation to PPDU indications from per-MSDU indications
to optimize CPU cycles. Add dp_rx_stats_update for receiver side PPDU stats
Change-Id: I4bdda8ac447e64cd1017e5be3949ec3f915a9d71
CRs-Fixed: 2123969
Transmit H/W requires that metadata sent as packet pre-header
should not be overlapping with the packet, as it might cause stalls
in the bus and might affect performance. For this reason, we are
removing align_pad bytes that we were adding by default for all
non-8-byte aligned frames and setting pkt_offset as 0 in Tx descriptor,
so that H/W does not read any metadata by default. H/W team confirmed that
8-byte alignment requirement is not there for frames which do not
have any metadata (Mesh/OCB/TDLS etc).
Change-Id: I2afdeaa49bc8306e7072cf5945762f19d6e4115f
CRs-Fixed: 2138287
Set host_tx_desc_pool bit in ext header for mesh frames as per
new ext2 header.
Change-Id: I7b4076e5882d8220b3f98fdbf0a7a52efc8abee6
CRs-Fixed: 2133277
Add support to send MSDU, mgmt. and ctrl payload along with metadata
to upper layer callback
FR 42132
Change-Id: Ie751322c7c15419ea908538e9e8687b64693fcfa
CRs-Fixed:2068486
Update of per-peer statistics was disabled from per-MSDU indications
as they are now updated from per-PPDU indications. However, the data from
per-PPDU indications is incorrect for some fields. Re-enable update of
statistics for per-MSDU completions till this issue is fixed in FW
Change-Id: I2983ef9244a6f95104ba49ab6d1c6543a951d0b2
CRs-Fixed: 2128230
Add a check in mec handler to see if mac_address is same as that of
vdev_macaddr.raw. If both mac addresses are equal, then add_wds_entry should
not be called. This corner case is seen in qwrap mode where the vdev address
is same as that of the backend wired station
Change-Id: I17504de8ef379680c2a2b962280e1853a5b2930d
CRs-fixed: 2109554
Add support to process HTT PPDU statistics for transmit
datapath and deliver PPDU indication to CDP interface.
Change-Id: I22e757497e13ce86fb7b42112fd56555c58e97bc
CRs-Fixed: 2098696
Add a division factor for number of tx completions to be accounted for in NAPI
budget. Fix the data type of budget to int to account for negative values.
Change-Id: I620af5537c5c1cdf3161da3a3c053a2c8bf777e8
CRs-Fixed: 2092526
Send peer create to NSS only when peer map comes for connected peers.
When peer map comes for WDS peers only update WDS peer specific entries.
Change-Id: I32d785180bcd1dae2703d40b55f4536685f10439
There is a possiblility of invoking spin_unlock without taking
spin_lock in DP tx descriptor prepare function in error path.
This change fixes this issue.
Change-Id: Id4c5c0115b14041865e7f97f930e7023e865eca2
CRs-Fixed: 2088616
For frames that are dropped by FW/HW and returned to host through WBM HTT path,
freeing of associated ME buffers (for multicast enhancement) and handling of TSO
segments is missing. Create a new function to handle the freeing of buffers in
Tx completion path and call this function in both HTT completion and regular
completion path.
Change-Id: Ibd061830e9325a2b2be9b1779b67b700f4ac08ae
CRs-Fixed: 2004658
