Commit-Graf

23 Incheckningar

Upphovsman SHA1 Meddelande Datum
qctecmdr
b700d98e0e Merge "disp: msm: dp: filter modes based on sde resource availability" 2019-07-12 16:50:22 -07:00
Tatenda Chipeperekwa
c36e7e01be disp: msm: dp: update the connected state during clean up
Update the connected state to false during display clean up. This
will allow subsequent connections to be processed correctly in
the face of disconnect failures due to unresponsive user mode
clients.

Change-Id: If30f5d722bf742060c9d4d2dec2207d7baf27fc2
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
2019-07-09 17:42:42 -07:00
Tatenda Chipeperekwa
d2c24e44e2 disp: msm: dp: disable audio during display clean up
Disable audio for every active panel during display clean
up use cases when the driver times out waiting for the
video path to tear down. This ensures that the audio
subsystem is notified before the clean up shuts down the
timing engine, and also ensures that the audio module
state is correctly updated to indicate that the session
has ended. This change will reduce the likelihood of the
audio subsystem attempting to program DP audio, and also
ensure that the state checks will correctly prevent any
attempts to program audio after the session has ended.

Change-Id: I937f894e80b55164f9700f021d852863aeb18959
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
2019-07-09 17:37:52 -07:00
Nilaan Gunabalachandran
98434934c6 disp: msm: dp: filter modes based on sde resource availability
Not considering the currently available sde resources and
caps while filtering/validating a mode will report unavailable
modes and result in an atomic commit failure.
DP should calculate the number of required lms and verify
if lms/3dmux are available before a validating a mode.

Change-Id: Idadcc655c30f5a831c47cf22b60085052b5b9fcd
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
2019-07-02 17:34:55 -04:00
Fuad Hossain
15bbd57eff disp: msm: dp: Improvements to dp mst simulator mode
Improve dp mst simulator mode by adding support
for up to 8 connectors, the ability to add and
remove ports dynamically, and allowing for
different EDIDs for each connector.

CRs-Fixed: 2459530
Change-Id: I945e3292a7e5150ab7a6bbe0addc4f4f46d58e82
Signed-off-by: Fuad Hossain <fhossain@codeaurora.org>
2019-06-07 15:03:05 -04:00
Samantha Tran
3be27eafcc disp: msm: snapshot of msm and sde driver
This snapshot ports changes from 4.14 to 4.19 into
the msm and sde layer. Snapshot was taken as of
commit 0f8fb25421ff ("cnss2: Add device version to
SOC info structure").

Change-Id: I59b799a78319c2db6930a2a10bc38976f8c09898
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
2019-05-22 13:08:31 -07:00
Fuad Hossain
ac1149d273 disp: msm: dp: perform mst phy operations during suspend resume
Perform mst phy operations during suspend/resume
to allow sinks to be in a correct state. A usbpd
api must also be called before and after the phy
operations to allow the system to go into deep
suspend and resume in a timely manner.

CRs-Fixed: 2363921
Change-Id: Ie21ef9b1caf2044e598466373a6059d2a1e5e58c
Signed-off-by: Fuad Hossain <fhossain@codeaurora.org>
2019-05-15 14:39:37 -04:00
Xiaowen Wu
162fff1195 drm/msm/dp: add extra 100ms sleep when MSTM_CTRL is not cleared
Add extra sleep between SST and MST mode if MSTM_CTRL is not cleared
at hpd to make sure dongle exit from previous MST state.

CRs-Fixed: 2411911
Change-Id: I5b1785c71a91df95167bf5083e9d752a275872a8
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
Signed-off-by: Fuad Hossain <fhossain@codeaurora.org>
2019-05-09 13:26:08 -04:00
qctecmdr
e683dcbce3 Merge "disp: msm: Ensure clean slate when starting and stopping HDCP" 2019-05-06 21:06:29 -07:00
Christopher Braga
7e9b80092b disp: msm: Ensure clean slate when starting and stopping HDCP
The DP HDCP layer fails to wait on and clear its internal thread
upon an HDCP stop or failure. This can result in use after free
failures if a read or write over aux channel operation is already
queued.

Update the DP HDCP layer to stop and wait on kthread completion
upon HDCP failures, and clear the kthread command queue before
resuming kthread execution. Additionally, ensure the SDE HDCP
worker thread correctly starts and stops execution upon HDCP
enablement and disablement respectively.

Change-Id: I4218d7935f89416b5e5d74afd8f5d22e031b9a38
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
2019-05-06 14:56:26 -04:00
qctecmdr
8c8fad0d91 Merge "disp: msm: dp: Update sink sync check to be disabled by default" 2019-05-03 11:36:05 -07:00
qctecmdr
f8090586ac Merge "disp: msm: dp: Avoid double authentication if first is still in progress" 2019-05-03 09:51:06 -07:00
qctecmdr
c0035372e5 Merge "disp: msm: dp: Prevent disconnect from stopping HDCP" 2019-05-03 02:04:49 -07:00
qctecmdr
366772ec9e Merge "disp: msm: dp: fix potential delay to start authentication" 2019-04-29 12:47:57 -07:00
qctecmdr
ea09882191 Merge "disp: msm: hdcp: force encryption for HDCP 1.3 compliance" 2019-04-29 12:20:16 -07:00
Tatenda Chipeperekwa
d113b3292e disp: msm: dp: fix potential delay to start authentication
Start authentication as soon as the stream is successfully powered
on and before the audio notification is sent. This will avoid a
potential delay in starting authentication if the audio subsystem
does not respond to the audio notification.

Change-Id: I83e5746ff521cfe8641f6e2bffd1bed953329a69
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
2019-04-25 19:43:31 -07:00
Tatenda Chipeperekwa
bd8fff4f9f disp: msm: hdcp: force encryption for HDCP 1.3 compliance
Force encryption for HDCP 1.3 compliance or HDMI use cases only
since DisplayPort supports dynamic encryption enable.

Change-Id: Ice0f462188e4cc96597a4779a6daca7877e36b6c
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
2019-04-25 19:43:31 -07:00
Christopher Braga
78439dfaf7 disp: msm: dp: Update sink sync check to be disabled by default
The DP standard leaves ambiguity to if sink synchronization
will be set before auxiliary protocols such as HDCP are to begin.
Update the dp_display HDCP worker  to check sink sync only if
explicitly instructed to via the new debugfs node 'hdcp_wait_sink_sync'

Change-Id: I4f4d0b14096aa3dc498e47de557de14092d37a58
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
2019-04-24 17:42:15 -04:00
Christopher Braga
c24090b2c5 disp: msm: dp: Avoid double authentication if first is still in progress
In scenarios where two streams become active in a short time period, HDCP
authentication may incorrectly be kicked off twice. This occurs due to the
HDCP state machine not indicating when authentication is already in
progress.

Update the dp_dispay HDCP state machine to only transfer to the
authenticating state once authentication has begun.

Change-Id: I38211203afe5127b80353c02072032a56e518900
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
2019-04-24 17:42:14 -04:00
Christopher Braga
9b4453096a disp: msm: dp: Prevent disconnect from stopping HDCP
If a DP stream is disconnected when HDCP is not fully authenticated,
authentication may not continue for remaining streams. This occurs
due to the worker thread rescheduling itself on auth fail while
disconnect cancels any pending work.

Update disconnect logic to wait for HDCP authentication to complete
before stream de-registration, and reschedule the HDCP worker if HDCP
did not fully authenticate prior to disconnect.

Change-Id: I0f8934e4f34e4f5a8015587e852131795a3dad21
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
2019-04-24 17:42:13 -04:00
Christopher Braga
c828b764c8 disp: msm: dp: Avoid HDCP cleanup during system suspend
Calls to QSEECOM are disallowed when the system is heading
into a suspend to RAM state. Delay all HDCP cleanup until
after resume to ensure HDCP is properly handled.

Change-Id: I7ebf567e50c28d39fc3c99dcb5d571a5d1e8dd93
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
2019-04-24 17:42:09 -04:00
Dhaval Patel
a74d2cf7fa disp: msm: add runtime_pm ops support in drm driver
Add runtime_pm ops support in drm driver instead
of direct sde_power_resource_enable/disable call.
It allows drm driver to use runtime pm refcount logic
to track the resources instead of custom implementation.
The change also removes the NRT_CLIENT support from
sde_power_handle code to simplify it further.

Change-Id: Ib14692dca5876703d0a230da2512d731b69b8ebb
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
2019-04-24 13:27:48 -07:00
Narendra Muppalla
3709853456 Display drivers kernel project initial snapshot
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.

Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
2019-04-14 22:20:59 -07:00