Drop 3 address multicast packet on rx when vdev is
has drop_3addr_mcast enabled.
Change-Id: I726bdc9383ea6e5a052a5d754e8f48c98f9ce874
CRs-Fixed: 3163011
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
Populate punctured pattern from WIFIPHYRX_COMMON_USER_INFO_E
And get puncture type from puncture pattern.
Change-Id: I3a5ba4c7c478d15cf3c3cfdcfd0573775ae342ca
CRs-Fixed: 3166010
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Add support to send unit test command to FW to dump
stats on suspend failure due to pending tx completions.
Change-Id: I6afb69a862c366c66a1e1f3dc009964272dfb75a
CRs-Fixed: 3151458
Kiwi target does not used TX status ring.
Hence disable the tx status ring for Kiwi.
Change-Id: If3a39a0017a884bee2320188621b1f05e0c6d568
CRs-Fixed: 3150815
Kiwi target does not used TX cmd credit ring.
Hence disable the tx cmd credit ring for Kiwi.
Change-Id: Ibd5fe2905a7362ea2ab89e65d77c7aea6ab259ee
CRs-Fixed: 3150814
Currently in some case we are receiving non error packets on REO2TCL
ring, which is causing issue.
Fix is to set DEST_RING_MAPPING_0 to SW1 for REO dest ctrl
register, So that non error packets with reo_destination_indication
with 0x0 in the reo entrance ring will be routed to SW1 ring.
Change-Id: I67f78f35e7dba899943307902d99d0325a60498f
CRs-Fixed: 3150186
Search flag addrX and addrY will be enabled for STA + TDLS case,
but currently TX bank profile is not updated which then STA still
use default TX bank profile - index based lookup search, TX might
fail.
Update bank profile with addrX and addrY search enabled.
Change-Id: I6af12d3707b59c5d4b4bba1fc5ec05a22bfcd984
CRs-Fixed: 3148759
Add support to change the tx_desc value to 65536. Some changes
to make the function argument as u32 type us made
Change-Id: I7cbde1b7ed4ab4e278c25c1ecfa94b7f673197f2
CRs-Fixed: 3130833
Add a separate APIs to configure RxDMA and RXOLE
configuration to enable the PPE based routing.
Change-Id: I95b8fbb361402bc04fc1f38aa8b0dbc6f99f4f06
CRs-Fixed: 3147720
Make 1:1 dependency on num REOs and rx_thread. Keep num rx_thread
dependent on rx REO rings, 1 rx_thread for each rx REO ring.
Controlled via INI dp_reo_rings_map.
Change-Id: I7c199226cfa3f173ea328d71075816b8eb9ba91f
CRs-Fixed: 3048260
The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
Add Legacy interrupt changes for QCN9224 target. Added code to calculate
hif group for DP interrupts and initialize legacy interrupts for the same.
Change-Id: I1b2f81905d3ce840fea172b13cbd192f041913d4
CRs-Fixed: 3139986
Add feature support to tag first packet that wakes up HOST from WoW.
rx_pkt_tlv.rx_msdu_end.reserved_1a field is used by TARGET to meet
such request.
Change-Id: I3d37e13e8cff49bc4f622d3070a19e4c4be56417
CRs-Fixed: 3137621
As part of TX FW metadata V2 global sequence number based
and SVC ID based support added.
Change-Id: Iefee2c47ecbebf6edfec9a687ef67e0e270bbf06
CRs-Fixed: 3136931
Rate statistics are updated at both peer and vdev level in Tx HTT
and Rx monitor path.
As per peer optimization changes, macro DP_UPDATE_EXTD_STATS is used
for aggregation of extended stats and this macro is used for both peer
and vdev stats query.
With this approach, when user requests for vdev stats, then rate stats
for vdev are updated with the rate values of the last peer present in
peer list of vdev and this results in wrong output.
In order to fix this, add an API to update the rate stats for vdev
separately.
Change-Id: I546a130e84f7fd577b80ace24e1dbb71000c0698
CRs-Fixed: 3132195
Enable usage of delta_tsf for SAWF. This will be used to compute tx
delay. Also, add support to update sawf stats in tx completion.
Change-Id: Idab7fbd5217175167ecdeee21cf5dc9daf1415d6
CRs-Fixed: 3135773
dp_is_hw_dbs_enable() is checking DBS and update number of
MAC rings value, current function name makes confusion.
rename it to dp_update_num_mac_rings_for_dbs().
Change-Id: I82540a943445560a99e27067e58d59035147208b
CRs-Fixed: 3131546
Ageout flush does not happen for WBM2SW4 if there
is only one TX completion pending in FIFO and all the
other WBM release rings are not active. This is due to
an issue in HW and this prevents suspend to happen due
to pending tx completions.
Fix is to avoid using WBM2SW4 release ring and instead
reuse WBM2SW0.
Change-Id: I250d8c9d460895449939212ebdb7abd62edb0234
CRs-Fixed: 3124733
check null pointer for soc return val and
check array index input for out of bound access.
Change-Id: Ib1d52f70128eaf9ba24e9024440490e470fec3d4
CRs-Fixed: 3127451
The monitor status ring is configured for filtering
in undecoded phy error packets. Each phy error can
be controlled using a specific error mask configuration.
Added below cfg80211tool command to configure phy error
mask for filtering undecoded phy error packets.
cfg80211tool wifix set_phyrx_error_mask mask_0to31 mask_32to63
cfg80211tool wifix get_phyrx_error_mask
Change-Id: I5e4f6a49458cc534d6d1d0f7f2a7424f3cc747b4
Added change:
1. Set/reset RXDMA MON STATUS ring filter setting and send HTT
message to capture undecoded frame
2. Handle undecoded frame to update cdp_rx_indication_ppdu structure
from hal ppdu_info rx status and generate WDI event to deliver it
to upper layer
Change-Id: I14485f28333b113b5a2fab639611551c2b08af2b
For 1x1 DBS case, host also need to configure max_mac_rings
as 2 and initialize each RX ring, currently host only consider
2x2 DBS case.
Check DBS capable instead of 2x2 DBS capable only.
Change-Id: Ic2d4fda9be245a3d0448b6b87ba8676f41d9187e
CRs-Fixed: 3129165
When kernel calls driver callback to get stats, dev_get_stats()->
ndo_get_stats64() .Host driver allocates memory using
kmalloc (size, GFP_KERNEL) routine,
but as ndo_get_stats is under RCU lock but not in interrupt
context(in_irq = 0, in_interrupt = 0, irq_disable = 1),
qdf_mem_malloc () uses ‘GFP_KERNEL’ to allocate memory,
leading to backtrace for sleeping function call from invalid
context.
As per kernel doc
(https://www.kernel.org/doc/Documentation/networking/statistics.rst),
while in ndo_get_stats64 () API, driver should not calling a routing
which can sleep. Use atomic variant of qdf_mem_malloc() to fix this.
Change-Id: I775f53dd1e8165e962321215e65d46142fb3b3cc
CRs-Fixed: 3128647
Specify vdev_id in bitmask format for HW vdev stats reset instead
of directly specifying the vdev_id.
Change-Id: I6e3cecdc83d01ecdfdeca3236e94cc91c57511ef
CRs-Fixed: 3128590
Add change to fetch and save the WMI service capability of FW to
support multi AST delete using service bit
Change-Id: Iba1af7c230574ae68086357cbb49ae3ca3d944e4
CRs-Fixed: 3118892
WAR for wrong length in first msdu in wbm rx error path while
handling scatter gather buffers. Get the msdu length from the
last buffer instead.
Change-Id: I869391ef5ca7005dce972013679c2143be836ecb
Changes for vdev and pdev stats as per the new peer stats
re-organization architecture.
Change-Id: I48f9fb4b0915c40f4add83f2e2dd074cc97874fd
CRs-Fixed: 3092123
Changes to get and reset peer stats as per the new peer stats
re-organization architecture and taking MLO scenario into
consideration.
Change-Id: I1c49e11d502585cc955ad087ffe3a606be23d83e
CRs-Fixed: 3092123
Make changes in the APIs for printing of peer stats by passing
the buffer holding peer stats along with the peer.
Also define macros for peer stats aggregation as per the peer stats
re-organization architecture.
Change-Id: Ia03cdb145de7e7c3355463ac31313edd863dfd2b
CRs-Fixed: 3092123
Delay and jitter stats are placed in struct dp_txrx_peer.
Make changes accordingly for allocation, fetching and clearing
operations of these stats.
Change-Id: Ic9b9e48467741072806000f4d1b3aa8e5c65d508
CRs-Fixed: 3092123
* Initialize stats in dp_txrx_peer and dp_monitor_peer as per
the stats re-organization.
* Update peer calibrated stats on every timer expiry of 1 second.
* Define APIs to reset monitor_peer stats and to fetch rdkstats_ctx
from monitor peer.
* Place check to make sure that monitor peer related APIs are
are called only for legacy peer or MLO Link peer.
* Update peer based pktlog flag, tx and rx capture feature flags
in monitor_peer.
Change-Id: Idadbe19e85d4a9fdf77fb6dabe0c8a4952b024b8
CRs-Fixed: 3092123
Move the stats parameters from the dp_peer which are used
in per packet path to txrx_peer
Change-Id: Ieb68b6950740791b37bbd2bfdc4815c3d7bc4834
CRs-Fixed: 3095637
Move the parameters from the dp_peer which are used
in per packet path to txrx_peer and params related
to monitor path to monitor peer.
Initialize txrx_peer and monitor peers.
Change-Id: I0449c67c1cd47deb76bc89b5ddc64174f6694eb0
CRs-Fixed: 3095637
