Set the new macro CONFIG_REG_6G_PWRMODE for all targets. This enables
the new for power mode APIs which will replace the for freq APIs.
Change-Id: Ibb17616fdfc8bd110b3a68b4636c9b3c1bc9ca97
CRs-Fixed: 3136314
Disable monitor mode on sdx65, it will save 5MB buf,
and improve iperf performance.
Disable WIFI_MONITOR_SUPPORT for pdev/vdev/peer do
nothing of monitor mode.
Enable MONITOR_MODULARIZED_ENABLE for monitor_soc
attach do nothing.
Disable QCA_MONITOR_PKT_SUPPORT for monitor ring
which are not initialized in dp_queue_mon_ring_stats.
Change-Id: I9865ad38dbbee56abee567fded17f39ee299ac42
CRs-Fixed: 3069269
Enable the support to parse the common user info from
the tlv in monitor status ring for KIWI.
Change-Id: Id54817efb65c005578c7cc28286feabde1bea652
CRs-Fixed: 3129126
The duplicated MACRO in Kbuild is:
cppflags-$(CONFIG_HTT_PADDR64) += -DHTT_PADDR64
Change-Id: I0da070efcedf1af58bf0443f3402e6750c36a351
CRs-Fixed: 3111174
Add support to update tsf timestamp on driver entry and
exit in data packet. This helps debug latency issue in
XR usecases.
Change-Id: I49d190a55b7ab3081225b7a226f1bbe4f717a20f
CRs-Fixed: 3090104
Add "gEnableUpdateScramSeed" ini support to send
WMI_PDEV_PARAM_EN_UPDATE_SCRAM_SEED command to firmware
to enable OFDM scrambler seed.
Change-Id: Ie5c244a7ea418eec0af1f576e8521804ee85a665
CRs-Fixed: 3106348
Currently wlan_cfg80211_mc_cp_stats.h file is present at
qca-wifi-host-cmn/cmn/os_if/linux/cp_stats/inc.
With this change, move file to qcacld-3.0/os_if/cp_stats/inc
as this file contain MCC specific code.
Change-Id: Ia531094fb15ae86f5afab2b9c3bdde197feaac6c
CRs-Fixed: 3108266
The flags, CONFIG_TX_MULTI_TCL for multi SW2TCL and DFEATURE_IRQ_AFFINITY
for Tx completion IRQ affinity, were turned on for KIWI.
Change-Id: I44a7b1c889d7113f078a75c549a632809dbebad0
CRs-Fixed: 3110299
Add cpp flag support for CONFIG_ENABLE_LOW_POWER_MODE in Kbuild.
Currently, this config is enabled for wearables only.
Change-Id: I2fb08930290f5c23641e1d76796ab829b31aae04
CRs-Fixed: 3110291
Replace blacklist/whitelist with denylist/allowlist for
blacklist manager component. and replace blm with dlm.
Change-Id: I8dec146d8cb3b61dc891b72bea44704b8ab733fe
CRs-Fixed: 3087575
Currently there is no support to read bmiss stats from fw.
With this change, add support to read bmiss stats from fw.
Change-Id: I77594d05fbcd295aff4c625ba5f4f33cbc491063
CRs-Fixed: 3097304
Enable CONFIG_DBR_HOLD_LARGE_MEM for QCA6490, to avoid
large memory allocation failure during idle restart.
Change-Id: I8f504f278bab6f4d974e8cf6b778e6c5ab9ec838
CRs-Fixed: 3101976
Currently, MAC address update is supported only when interface is down.
Because of this framework needs to issue interface down and interface
up to update the MAC address. Interface down and up will lead to VDEV
delete and VDEV create commands to the FW.
To optimize Host-FW interactions during set MAC address, add support
to update the MAC address without bringing the interface to down state.
Change-Id: I76afa8f8c2504e8271bf689392d526f994afff0a
CRs-Fixed: 3063201
Add support to send qos null frames received from firmware on
STA interface to mon interface based on config value. The config
value get update based on vendor command set by user.
The packet filter check in ucfg_pkt_capture_process_mgmt_tx_data
moved to target_if_mgmt_offload_data_event_handler. So that we
will not allocate any buffer if filter is not set.
Change-Id: I426b340c5a65711ada971062af95ae039d18d0bd
CRs-Fixed: 3076241
New files are added in qcacld-3.0 to have cld
specific (e.g. roaming) MLO manager changes. But the inc
directory path is not added to INC list in Kbuild and
it's causing compilation issues while compiling the
source file wlan_mlo_mgr_roam.c
Change-Id: I2801a3a5fd04dac7e35fca3a43017bb1d6fd2b10
CRs-Fixed: 3095730
Enable monitor mode for WCN7850.
Enable the interrupt based processing in monitor
mode for WCN7850.
Change-Id: I6f8c6951794d0754977fa0d45086a95df25a13e6
CRs-Fixed: 3095456
Currently there is no provision to get the calibration failure
information from the driver. Because of this it is getting difficult
to debug the calibration failure issues.
To simplify the calibration failure issue debugging, add support to
parse calibration failures events in the driver.
Change-Id: I6d831804cca259862fea3e8bb4af33d556138d43
CRs-Fixed: 3078926
Enable TX AST index search for HMT STA which is more efficient
compared with older source address search.
Change-Id: Ie5ebf4199ada959ebd33351929cf642c21657c51
CRs-Fixed: 3084026
Kbuild change to
- Disable timer irq for CE in WCN7850
- Disable status ring timer WAR in WCN7850
Change-Id: I59a247bf14450c5e1ec194c505f3a00eb5f3619f
CRs-Fixed: 3075871
Add path of final version (E3.0 R38) of cleaned up HW header files
with comments removed and appropriate copyright added.
Change-Id: I5b65141d68672da6368f71132ad583ed1fc3db53
CRs-Fixed: 3076670
Add the support for the feature of Full Power Down while
in low power mode.
For this feature, it need to power down wlan chip when
suspend, and power up wlan chip when resume, so need to
change to call wlan driver shutdown and then power off the
wlan chip instead of calling wlan driver suspend when do
suspend, and changing to do power on wlan chip, download
wlan firmware, and calling wlan driver reinit instead of
calling wlan driver resume when do resume.
Change-Id: I293647175c151da0fd6628345f98ea65c83b1bb3
CRs-Fixed: 3061366
In some scenario, it is required to receive every ARP/NS packet even
it is not to solicit address itself. So add this vendor attribute
configuration to enable/disable ARP/NS offload on fly.
On some platform, if target suspend to WoW mode, APF filter will drop
such ARP/NS packet in the front, so prevent runtime suspend happen
if disable ARP/NS offload. System suspend still allow in consideration
of potential power impact.
It only support on STA/P2P-Client mode device, and this configure is
optional, while default behavior is ARP/NS offload enable. It will
restore to default behavior if interface being closed.
Change-Id: Icd49e230024bc1ce51519cd9fafee9bc9f79f382
CRs-Fixed: 3058494
Enable config flag to use multiple tx and tx completion
ring pairs for qca6490 when IPA is disabled.
Change-Id: Iafa6df504d7be55cbc5a233d6975963f0e118df5
CRs-Fixed: 3059736
Cleanup WMA HWMODE and WMA HWMODE List
as the same functionality is already taken
care by policy manager
Change-Id: I5dc1342422e70737111f882013ed3a6351a85336
CRs-Fixed: 3064739
For beryllium, use sw_exception bit to indentify is it FW
reinjected frame or not, if sw_exception bit is marked, then
skip FISA for these kind of frame.
Change-Id: I6ca74c244c366641a7bcfddff2834550b1e5b472
CRs-Fixed: 3056157
Enable the below datapath MLO features in Kbuild
- DP_USE_REDUCED_PEER_ID_FIELD_WIDTH
The above feature reduces the width of peer_id from
peer_metadata, thereby reducing the size of the peer
object array.
Change-Id: I58533c241a40184129786f11a47f3722cf005a61
CRs-Fixed: 3059637
Since the code under FEATURE_HAL_DELAYED_REG_WRITE_V2 has been
removed and cleaned up, removing the build flag from Kbuild.
Change-Id: I66072af952877881fb700869ae4774e4f1a388cc
CRs-Fixed: 3056477
Monitor mode code has been restructured into 1.0 and 2.0 directories.
Update Kbuild path to reflect the same.
Change-Id: I59e79decd269a394b21c30e0685015e6ff16e772
CRs-Fixed: 3027215
Add support to offload icmp feature to fw in case of
suspended state to avoid high power consumption.
Change-Id: I3ff19d71eac530c75be57e6b52b975e755ff2a53
CRs-Fixed: 3042452
wma to target_if convergence code is guarded under the feature
flag ROAM_TARGET_IF_CONVERGENCE and it's is enabled currently.
Remove the flag usage and remove the deprecated code(else part)
also.
Change-Id: I6973d9c366ec6a9c6164dd19f6f4775dd3ebf5f0
CRs-Fixed: 3049942
Add a sysfs to display DP stats on console. Sysfs file
displays requested stats on console and wlan logs.
Change-Id: Ifd56d1bf6f578a4ce3f1d963040e6d3cd138c64a
CRs-Fixed: 3035860
