1. Change the names of parameters and functions related
to direct switch feature from ppe to ppeds
2. Remove the unused ppe_release_ring
Change-Id: I5a95b1273e338f354903af98158578ac65758a8a
CRs-Fixed: 3345097
Issue:
When DS mode is configured for a VAP
in both AP and STA (RDP 433), the tput reduces.
For instance, for an ingress of 7G
in standalone case, the egress rate is
1) 6887 Mbps when DS is enabled only in AP
2) 1900 Mbps when DS is enabled in both AP and STA
RCA:
With the help of debugs & proc/interrupts, identified
that we are not setting up the peer when the
device in STA mode due to AP mode check in
dp_soc_txrx_peer_setup.
Hence, the traffic is not flowing via DS
and so, tput reduces.
Fix:
Added changes to invoke txrx_peer_setup in
STA mode and DS mode will configured in that mode.
With the fix, traffic flows via DS, which
in turn improves the increased
Change-Id: Ib51e9a27e5078ed99160f213ddffed801c2e4ecf
CRs-Fixed: 3355603
Change interrupt timer threshold for ppe2tcl ring to 30 us
from existing default timer threshold.
Change-Id: Id6a2625c086af6c4c49188c0abdc8d24fb8bdfe5
CRs-Fixed: 3355208
1.Add check in Tx completion path to handle
mcast packets from all ML partner vdevs
2.Handle cases where a ML mcast vdev can be
deleted and started as NON-ML vdev and
viceversa by adding reset ML mcast conf.
3.Optimized Register configurations for Mcast
at Init/Delete and Start/Stop AP
Change-Id: Iab8a5a081e2e0377509574d362754d32c5b83df2
CRs-Fixed: 3350350
set rx_reo_queue_desc_addr_31_0 and rx_reo_queue_desc_addr_39_32 to 0
in hal_reo_shared_qaddr_write_be
Change-Id: Ib92775e0883b68f49c27e606e762384239bae955
CRs-Fixed: 3339043
Enable and register PPE2TCL and REO2PPE ring interrupts
for direct switch
Set interrupt timer threshold for ppe2tcl ring as 30 us.
Change-Id: Ida1ff6c3c2000f16f07960f7eae0d10edc337dc0
CRs-Fixed: 3341790
Add support for GET MLO Multicast API to check
if the vdev is primary multicast vdev.
Enhanced SET MLO Multicast API to reset primary
multicast flag for all partner vdevs.
Change-Id: Ic88949ce922bb1d0fd34349058d254de0d1f563c
CRs-Fixed: 3322523
In the dp_tx_desc_set_ktimestamp() return false case,
tx_desc->timestamp will not be updated, instead,
tx_desc->timestamp_tick used. So it will cause
dp_tx_comp_delay_check() always return false when
timestamp equal zero. Need to move the tx desc
timestamp check to correct place.
Change-Id: Ic1d5f1035784dcc3f240d832ac1e8820bc24f782
CRs-Fixed: 3331251
Only 8 RX data TIDs are used, so HW stats query only needs to update
these TIDs info to save command executing time. Change is aimed to
reduce the TID number and use only one REO flush command for overall
REO cache flush.
Change-Id: Ib642451b9f07f62198126c45644742e1908280cd
CRs-Fixed: 3325964
Retain ds ring indices across wifi restart to avoid
edma hang. Fetch the indices from ds module and set
the corresponding ds ring indices.
Change-Id: Ia299a7006166aef096c7d2c1f65f6bef65415a37
CRs-Fixed: 3332152
In force teardown case disable the interrupts before
going down. As target may be still active, we may
still continue to receive traffic. Disabling
interrupts to nsure we dont process interrupts while
cleaning up partner SOC
Change-Id: I7092d398c039302234206cb72f7453b6dc0cbcb7
CRs-Fixed: 3332961
Add support and ops for initialization and
deinitialization of Direct Link refill ring.
Change-Id: I2c7018c4f8411fb7a590cfbb8b991f9152b22397
CRs-Fixed: 3316656
MSI vector number is defined in platform driver, so use platform
driver API to check whether it is in one MSI mode or not.
In case of one MSI vector, interrupt migration needs to be disabled.
This is because when interrupt migration happens, the MSI data may
change. However, MSI data is already programmed to rings during initial
phase and there is no way to know that MSI data is changed during run
time and reprogram again.
If it is in one MSI mode, disable interrupt migration by adding IRQ
flag IRQF_NOBALANCING.
Change-Id: I54579dfe1e658c1a2c395be93875d013d6e6affd
CRs-Fixed: 3290829
Add MAC ID to which the Spatial Reuse stats is requested from.
Pass this MAC ID to FW to get the respective Spatial Reuse stats.
Change-Id: Ief2434bf1f2fc82d9339ee38933effbd580088af
CRs-Fixed: 3328686
FISA update may come when target in suspend state, then
UMAC force wake may return failure and lead to system timeout
crash. Change is used to defer the update when resume happens.
Change-Id: If033bed692dccf2d27e9c76825ab2063a3f56841
CRs-Fixed: 3324926
Currently vdev id is passed from nbuf cb
but vdev_id is not being updated in nbuf cb
which is resulting in passing wrong vdev id to the
packet logging function.
So to fix issue pass vdev id from tx descriptor instead
of nbuf cb and also rate limit the error log in vdev NULL
case.
Change-Id: I69f568b7da52f1c96f208a220c6c4a7f6d98e082
CRs-Fixed: 3327359
Typecast vdev->ref_cnt, from qdf_atomic_t to int,
using qdf_atomic_read() when logging as an
integer value.
Change-Id: I3432f5b8247a3031f1896d8964529a568fc3af19
CRs-Fixed: 3326096
Add support to read TSF2 and TQM scratch regitser in the HAL layer
for WKK v1 and v2 board.
Change-Id: I0ef5e8cf4e06c0b5c98169252a81f70989285d2d
CRs-Fixed: 3321782
Currently the monitor mode processing assumes the
rx pkt tlv to be consisting of RX_PACKET_HEADER tlv.
This assumption is incorrect in case of sta+monitor
mode, where the RX_PACKET_HDR tlv has not been subscribed.
Due to the above incorrect assumption, a certain portion
of the actual payload is being discarded, when the
rx_pkt_hdr tlvs are stripped off from the received buffer.
To mitigate this issue, use the rx_pkt_tlv length based
on the tlvs which are enabled, and configured to the
rxdma for reception.
Change-Id: I8f29db85bbd50316e3c2073ae9a2e79fd724be05
CRs-Fixed: 3318038
Tx completions can be received after 30seconds, this is causing
race condition as there is a forceful freeing of tx descriptors
after 30seconds. This race condition corrupted tx desc pool's
freelist pointer which contains list of all free tx descriptors.
Increasing the threshold from 30seconds to 60seconds. Display
id for which tx descriptor is freed.
Change-Id: I5e0c78283747028de558f9c5db99f7089ffb7e97
CRs-Fixed: 3322566
Currently, when tx completions are pending for more than 60
seconds, assert is generated in defconfig builds.
Force free leaking tx buffers in defconfig builds so system
can go to suspend in defconfig builds.
Change-Id: Ie66506d58e85176320c7aa35d49059f808be0054
CRs-Fixed: 3318409
In MLO mode, there are 2 link peers and 1 MLD peer. TX/RX stats
is kept in txrx_peer, which only exists in MLD peer. This change
aims at fixing HDD failing to get rx stats info when in MLO mode.
Change-Id: I046003018c72ca3c9129e3b9e5abca4a46a024ca
CRs-Fixed: 3298344
Add ini param "dp_disable_rx_buf_low_threshold" to disable
low threshold interrupts on regular rx refill ring. Default
it is enabled.
Change-Id: Ie471a4dc6862cbfe8b1eafe7c7d2ce2e0a7fcb7a
CRs-Fixed: 3313885
Add support for:-
1. PPE VP entry attach and detach.
2. Per VAP PRI2TID Support
3. Dump the PPE VP HW entries.
4. Add tx completion handling for ppeds descriptors
Change-Id: I2a6d0be5bb556663a39a24d17b703877f3b5ad00
CRs-Fixed: 3276981
Currently we cannot track vdev ref_cnt change with
peer creation and deletion. This change will help track
the vdev ref_cnt and detect if any pending unreference is
causing inactive vdevs.
Change-Id: I5548667b0f1541efb583f912f6b7ef8a88853f5b
CRs-Fixed: 3303571
Add cfg command to enable umac reset skeleton debug, which
when enabled will skip post reset procedure handling.
Change-Id: Ieca393e6292660bb3ada40408fd6e71ac78d0a1f
CRs-Fixed: 3296960
In SAP due to intrabss forwarding, Tx ring update is going through
when WOW enable command has been sent to FW. This results in crash.
To fix this, do not update HP when apps suspend is in progress.
Change-Id: Id4176224563bdd759828397fa1cd23de1598192e
CRs-Fixed: 3294407
In MLO mode, there are 2 link peers and 1 MLD peer. TX/RX stats
is kept in txrx_peer, which only exists in MLD peer. This change
aims at fixing HDD failing to get rx rates info when in MLO mode.
Change-Id: If476216a6b0d1c006fbc0d45a3cbfbb0be79efd3
CRs-Fixed: 3287090
