This change updates the autorefresh disable sequence to manually
trigger output hw_fence during the transition. This is required
since on the last autorefresh frame HW will not trigger the output fence.
Change-Id: I6789fc6b51421524f88dcbdd1a063ae947646ae4
Signed-off-by: Christina Oliveira <quic_coliveir@quicinc.com>
This change adds the value of hw-fence ready to
event logs for video and command modes.
Change-Id: I40a2e886a3b95e8853efcbdddf7fd9f6ce48eb9b
Signed-off-by: Christina Oliveira <quic_coliveir@quicinc.com>
Starting mdss 9.0, dpu supports triggering
the frame fetch through hw-fencing. This change
adds support for this hw-fence feature.
Change-Id: Icc7d0b69fc2a51103d14612f5ac89b44a47ed826
Signed-off-by: Ingrid Gallardo <quic_ingridg@quicinc.com>
Signed-off-by: Christina Oliveira <quic_coliveir@quicinc.com>
Add sde ctl hw changes to support downscale blur. The ctl flush/active
bits for downscale blur are part of the writeback flush/active bits.
Add a new ops to update the dnsc_blur flush mask.
Change-Id: I29483ab399c5503ef4cfe5804d25cd26ad6265b2
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
The sde_hw_blk was meant to be a generic base object for all
SDE HW blocks, however, it enforces using a common set of ops
which is not practical when blocks have different capabilities.
Since this object was never used as intended and is not doing
anything functional today, remove the dead weight.
Change-Id: If76006c1ae5c62e8d7d77b100837dbaf6c661bd3
Signed-off-by: Steve Cohen <quic_cohens@quicinc.com>
This change fixes the continuos splash logic that identifies the
pipes staged by bootloader. The same code flow is used in trusted ui
handover as well. Existing logic was counting the pipes twice if the pipe
is staged on both the layer mixers. This change simplifies the pipes
already staged before handover by using the pipe index to convey if
it is staged or not.
Change-Id: Idb255f2077161dc3553114ac5d04e0ef743bb5ea
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Continuous splash setup checks the CTL configuration to determine and
log all planes that have been enabled for continuous splash boot.
This logic currently only checks the planes mapped to each LM on
a given control path, resulting in data planes being missed.
Update the boot plane enumeration logic to additionally check the CTL
fetch active registers to detect and log missed planes. This logic
checks against all planes found through the original enumeration path
to avoid logging the same plane twice. Note that planes found via the
fetch registers are assumed to be used across both rectangles due to
hardware logging limitations.
Change-Id: Ic1f4aaba94111fe096ba9764eeaef242beb6adf5
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
This change disables the border color on the layer mixer,
based on the caller's request. This is required to totally
disconnect the layer mixer hardware when it is not
participating in blending the pixels. Having empty blendstage
but border color enabled, allows Layer mixer hw to produce
border pixels even when blend stage is empty.
Change-Id: I8e84aeedffbd42ad793a167a6cc5a3a653864c1a
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Add smmu cache hint at during the msm gem prime import
to ensure memory is cacheable. Ensure sys cache feature
is added to all sspp, not just vig.
Change-Id: Icc10468ad8d3e7c6aabd437776cde99eb627375a
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Setup blendstages is done per LM but FETCH_PIPE_ACTIVE is per CTL.
Overloading mixer blendstage setup with fetch pipe logic can lead
to HW programming errors. Refactor the logic for setting
FETCH_PIPE_ACTIVE by adding a new op that allows caller to provide
a bitmask of all pipes required to be active on this CTL. This new
logic includes support for:
- 4LM use-cases, staging pipes for all LMs within a CRTC
- Demura fetch-pipe without need for tracking via active_cfg (removed)
Also, lower the cyclomatic complexity in setup_blendstages by moving
the logic for obtaining the mixer config settings in to a helper
function.
Change-Id: I2907b359ffad5734be5b06f44919b5ddb1ef3f7c
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Store full or partial static image in system cache (L3 cache)
for video mode primary display. Added additional commit to
crtc commit thread to transition to read cache state.
The change also updates llcc APIs to support generic functionality.
Change-Id: I6b2a45da946d7e0e0b326da9d214be3f01a9420e
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Some of the features in the DPU hardware needs planes to be staged but
it should not be blended in the layer mixer. Change adds support for drm
driver client to set the blend type on the plane and updates driver code
to skip staging the plane.
Change-Id: I1e8c7f6ce5617820ea8b24419e0d4d27b481819b
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Using individual flush functions for each active hw blk
is not scable-able for future use. Clean up the ops to merge
all flush functions into one and manage HW block id
with same API.
Change-Id: I62afbc51fa7d345b3a1f5721e5e09661a4215f7a
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Add support to configure the DPU pipeline to support VDC-m
topologies.
Change-Id: Ib8ce9a0eaeaa838759fb09cb2ee164d4765e4989
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
This change adds support for dsc using the 3d mux hw block.
The 3d_mux hw block merges the input from layer mixer before passing to
dsc block for compression.
Change-Id: I21544c33fff2c1e604c0ae712a036a127d25afcf
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Certain sub-blocks need to be enabled disabled dynamically on a
seemless mode switch (for ex. partial update) CWB is another example
where control path interface configuration needs to be dynamically
changed on enable/disable of concurrent writeback. Similarly
3d mux needs to be enabled/disabled for partial update use cases.
This change modfies the current api update_cwb_cfg and makes it
more generic and adds support to enable/disable only the 3d mux.
Change-Id: I5e5a6e78b0599f689cb2f83d0d626a5f392eff6e
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change introduces new ctl path api read_active_status to check
if a particular hw block is active or not in the current control path.
This is specially required in continuous splash use case when bootloader
has programmed certain blocks and the kernel driver tries to find
out the same configuration. This is used to ascertain which DSC block
is active in continuous splash case since DSC blocks are not tied to
mixer blocks.
Change-Id: I8dd590aa2dc764bd340727c166e1133ef9ce7af5
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
SDE HW from lahaina has moved the DSPP flush bits from CTL_FLUSH
to new CTL_DSPP_x_FLUSH registers. This change brings in
support for programming the new DSPP flush registers which
allow more fine-grained control over what sub-blocks within
each DSPP get flushed.
Change-Id: Ie16c9b153d607bd7627ba02480813ab588bbe2ea
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
CWB, DP and WB displays tear down sequence must reset
3d_merge, ctl, pingpong_binding, etc. MDP HW
blocks. This change fixes the tear down
sequence register programming. It also moves flush
sw reset before encoder_disable call. That allows
CWB tear down to update the flush configuration
on primary ctl path.
Change-Id: I21c521b39456af4144cf836c65d46a25c985f51d
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Get controller scheduler status at each vsync to verify
pending frame status.
Change-Id: I01401a57b68828294299977a7be7e796d07c7472
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
