Add support to change the tx_desc value to 65536. Some changes
to make the function argument as u32 type us made
Change-Id: I7cbde1b7ed4ab4e278c25c1ecfa94b7f673197f2
CRs-Fixed: 3130833
Make 1:1 dependency on num REOs and rx_thread. Keep num rx_thread
dependent on rx REO rings, 1 rx_thread for each rx REO ring.
Controlled via INI dp_reo_rings_map.
Change-Id: I7c199226cfa3f173ea328d71075816b8eb9ba91f
CRs-Fixed: 3048260
Enable the 4th Tx. completion ring to save CPU load
Initialization and interrupt handling for 4th completion ring
is done here.
Change-Id: I2db27218a3c3e14d719d012f03454a6a7aa647fe
User can specify a limit and frames are dropped when the memory
used by packets in the queues goes beyond the limit. This is a
SoC level param.
Change-Id: Id2bd9caaa11d9ea9f9e04c635ff629190bb62916
- Fixes for compilation issues after enabling
monitor 2.0 support.
- change copyright year for all files in the chain.
Change-Id: I885e257bd8ca83850656d8a1f408c1bc34920d7a
CRs-Fixed: 3086483
Add configuration at SOC level for hw vdev stats in BE architecture.
Following config parameters are added:
vdev_stats_hw_offload: option to enable/disable hw vdev stats
hw_vdev_stats_timer: timer duration for hw vdev stats
Change-Id: I8cbd2b6a7378d8a9e7de920a3a6fdff0cf7785fe
CRs-Fixed: 3067843
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
This force use BA64 ini config is no longer needed, because another
gRxAggregationSize can do the same settings and more flexible.
Change is used to remove this config.
Change-Id: Ie780489849f8b701481a628a9bca2b4112460bd8
CRs-Fixed: 3076982
Dynamic GRO feature is enabled by default and aimed for specific
customers. Add an ini control to allow other customers to config
this feature enable/disable.
Change-Id: I7f505599327ac131b3cdac9b4d9e038861b1aeb6
CRs-Fixed: 3074689
For IPQ products, there is 1 refill ring which is of hardware type
and host replenishes the buffers onto this ring so that hardware can
use these buffers for Rx.
In IPA offload mode, the buffer replenishment model is different from
the one mentioned above. There are 3 refill rings, out of which,
2 are software refill rings (1 for host and 1 for IPA), and last ring
is hardware ring given to FW.
Ring given to IPA is to refill the buffers after processing the
regular Rx packets and ring given to host is to refill the buffers
after processing of exception packets. Since there are 2 entities to
refill the buffers, the hardware ring given to FW multiplexes these 2
software rings and provides the buffers to hardware.
Make changes to follow above replenishment model for SDX+Pine
integration.
Change-Id: I0d9e4ec811a3023a258e0a6b9ee22ccdffcebafa
CRs-Fixed: 3049633
INI config to set the number of tx rings to 1
or 2 does not take effect since the value of
WLAN_CFG_NUM_TCL_DATA_RINGS_MIN is 3.
Fix is to set WLAN_CFG_NUM_TCL_DATA_RINGS_MIN to 1
to allow for a lower number of tx rings cfg.
Change-Id: Idc7881f75d42fabda5d3ed55e74c9eb784f7705f
CRs-Fixed: 3070272
Add support configure ipa tx ring and tx completion ring for
2.4G and/or 5G separately.
Change-Id: Iafb8fa589ff0cce15609a3dfa2209364291d7cef
CRs-Fixed: 2996604
Set default value 7 for INI dp_reo_rings_map, this is just
one WAR to not block HMT before reo_ring_remap and dp thread
issue is fixed.
Change-Id: Ib2c8ebab936951798112759e1ac0baba85996036
CRs-Fixed: 3005555
Currently IPA tx buffers are fixed at 1007 buffers.
Adding INI support to change number of TX buffers at load time.
Change-Id: Ide0357554f34759198276b9699e0e6f4a3e20051
CRs-Fixed: 2957916
Beryllium targets have more number of HW rings.
Add INI changes to allow increase in number of rings.
Change-Id: I73d779334601d3a1c2aefcade1dcf9dd0f2ef761
CRs-Fixed: 2891021
The current limits of DP RX packet drop thresholds are huge;
In scenarios, where the processing of RX packets is slow, huge
number of packets will be held in the memory and could eventually
lead to out of memory issues. Reducing the thresholds to address
the problem.
Change-Id: I76a2622fb30cda615aeb27fcc9c8e548ffec3e51
CRs-Fixed: 2941885
As part of WiFi ini clean-up FR, the ini gReorderOffloadSupported,
is identified as an obsolete parameter. Hence it is deprecated.
Change-Id: I7d5ef3b77eb90ccbad1f84ec7d3cce1df761af15
CRs-Fixed: 2896016
Update default values of INI items to most commonly used values
in WCNSS_qcom_cfg.ini file on commercial devices.
Change-Id: Ie3a4ce2cbf4bc2352d5ebc5be939a47818a6d594
CRs-Fixed: 2874759
Change the value of WLAN_CFG_RX_SW_DESC_NUM_SIZE_MIN from 4096
to 1024, so that the rx descriptor number can be configured in
the config file of target.
Change-Id: Iedbbf3cbbfd92dc3d955e0e67aac362afbabed45
CRs-Fixed: 2862285
In existing implementation, for monitor mode below allocation
are done at pdev attach and init time.
a. 64 monitor buffer allocation for RxDMA monitor buffer ring
b. Link descriptor memory allocation for monitor link descriptor ring
This memory is waste of memory for customers not using monitor mode and
low memory profile.
To optimize this memory, allocate all buffers and link descriptor memory
at monitor vdev creation time.
Change-Id: I873c76d2f625a782532a101037915b0353928a5b
CRs-Fixed: 2829402
Some AP disables AMSDU in BA256 mode, this has draw back
with KPI in HE mode, so leave a config field to use 64 BA
forcibly to make high KPI with these types of AP
Change-Id: Ia69ffe118fd5bbda78cfb98126a483fcf305294e
CRs-Fixed: 2828304
This reverts commit Change-Id: I98f8f751dc75a3d6f2296f0844529e9c72c4090b.
This INI is moved to HDD_DP.
Change-Id: I451fa50621fdc8b6cbe027bdf1495788914481c9
CRs-Fixed: 2824623
Number of DP rings used in HOST mode and NSS offload mode differ
and in current scenario the rings are allocated unconditionally.
Allocate only required number of rings based on the HOST mode and
NSS Wi-Fi offload mode and based on the number of radios supported
per SOC.
CRs-Fixed: 2790504
Change-Id: I20ce1908da47c197ea3b406f8704b964f3d8f7d1
Add cfg_dp_sg_enable to get ini key dp_sg_support by cdp_cfg_get.
And add some comments for CFG_DP_SG to clarify more.
Change-Id: I34de242eacbdcf55398afe64b91f5534f205fa22
CRs-Fixed: 2822536
Add INI support to enable the feature of sending
ICMP packets to FW at regular intervals.
Change-Id: I888bb2f65e8a497c3e6541f213def905d6dd0727
CRs-Fixed: 2813169
Add a ini control field to control rx frame pending check
logic in WoW case. In some cases, power consumption is more
important than rx frame ping loss, so add a control flag
Change-Id: I8c4d3725edddb82a0f06dc70c22a8dd5243209f2
CRs-Fixed: 2806786
Add support to configure REO ring threshold through ini
for WLAN_DP_PER_RING_TYPE_CONFIG feature.
Change-Id: I02a14adcf243905ab25c2af12cb9499f32ff453f
CRs-Fixed: 2789147
The number of DP data rings are configured through INI
files and the default number of rings are defined by macros.
Default macros for DP data rings are defined twice, hence
remove such duplicate macros
Change-Id: I62927751731b88ce74c4f2651aa74c19b301b89f
In addition to firmware capability, add INI param to decide FST
placement in CMEM.
Change-Id: Icc5fdfa49e35665b59efce3fc1f1855d84c16140
CRs-Fixed: 2778898
