Fix compilation error in legacy features after 6Ghz band
support and code cleanup.
Change-Id: I5b8c9b46d7647e88044b2f0a0f9c2d35fa4b8a89
CRs-fixed: 2554204
The register window needs to be configed properly before accessing
any larger than 4K range PCIe registers. Expose the lock in PLD to
avoid race condition when both platform and host drivers
try to config it.
Change-Id: Icd3df3d4d2cc2ecc3df608e7b767a3e654b94500
CRs-Fixed: 2549887
In DBS mode 2x2 VHT40 2G and 1x1 VHT 40 5G, the MAC 1 (5G)
doesn't support VHT80. Update the ch_width to max of 40Mhz
in beacon OMN ie when switch to DBS2.
Change-Id: If5cf65bca815d1e8df67a1515b2fb3edcba52a8e
CRs-Fixed: 2520719
In special case when vdev delete for wlan disabled,
event eWNI_SME_DEL_STA_SELF_RSP has been sent
to QDF_MODULE_ID_SME queue, but scheduler thread have no
execution chance, timed out waiting for sme close session in
hdd_vdev_destroy, sme session isn't cleaned up.
When enable wifi again, vdev create failed for cannot re-open
active session, wifi failed to start any more, can't recover
until system reboot.
Fix:
When timed out waiting for sme close session in
hdd_vdev_destroy, clean up sme session too as normal process.
Change-Id: If6c6ed313928294bb83ebbc0e716a574e6a07470
CRs-Fixed: 2547355
Support wlan ipa clk voting for kona. Host should provide
bandiwdth levels to IPA driver for which IPA uc monitors
the levels. Once the threshold is reached IPA uc interrupts
the IPA driver and IPA driver informs host driver via callback
registered.
Change-Id: I9fd805d69858a413f20b9e55a9c02a82054c646b
CRs-Fixed: 2526300
Move to the common psoc object and retrieve the cfg ini
information from the legacy implementation.
Change-Id: I38147c748796550f2adede44b681559a4f329fbf
CRs-Fixed: 2547536
This change is to support 11ax linkspeed rate
on UI.
It supports different config for gReportMaxLinkSpeed.
Current 11ax rate support to max 80 nss2 mcs11.
Change-Id: Iff8cbafe1354ab50c4b3a90ef8ab698a3350a21d
CRs-Fixed: 2529291
Since peer mac instead of sta_id used to find pointer to peer in
dp_register_peer, so copy and pass peer mac address when register new
ndp peer.
Change-Id: I47ab345fff83d9c03208c5c1457db0fb7f6ed9c0
CRs-Fixed: 2546705
Update SME/CSR for using channel frequency in STA connection
params and handle 6G AP IEs for association.
Change-Id: I1725223b6763a729762b604c850c9b493f739ae6
CRs-fixed: 2552009
HE STA / AP operating in 6GHz should send HE 6GHz band capabilities
element. Update LIM layer for sending this IE in assoc, reassoc and
probe request / response frames.
Change-Id: Ie991ad3656e6b721e0ee0783b5974d438699091c
CRs-fixed: 2552009
Due to channel number ambiguity with 6ghz, update channel references
in HDD STA connection path to use channel frequency.
Change-Id: I81f3449c9087030e4d98c17a5b12c731f99b39ab
CRs-fixed: 2552009
Function csr_update_sae_config is inital connection, so it should
be out of WLAN_FEATURE_ROAM_OFFLOAD. While function
csr_process_roam_auth_sae_callback is roaming related change,
so it should be in WLAN_FEATURE_ROAM_OFFLOAD.
And do the static inline to the dummy functions to avoid the warning
which defined but not used.
Change-Id: Ib873050d2f5bdb960244d2f900e078f314962a8b
CRs-Fixed: 2552295
Fix compilation error in WLAN_FEATURE_HOST_ROAM after policy manager
public API update to use channel freq as function argument instead
of channel number.
Change-Id: I690f25a169f4438272d44bb7292558a0171d1ab8
CRs-fixed: 2551820
Due to channel number ambiguity with introduction of 6GHZ support
update NAN component APIs and data structures to use frequency
values instead of channel number.
Change-Id: I982fe8da0320c878f9473a62c86b80b220e2892e
CRs-fixed: 2551927
As a part of cdp convergence the pdev_id
is used to obtain the pdev handle on need
basis.
Instead of the pdev handle, use the pdev_id to
retrieve datapath pdev handle.
CRs-Fixed: 2539733
Change-Id: I887ea2f1a312207cbb642b33435f4e7111068c62
Add the soc context for ol_txrx.
This soc layer is used to hold ol pdev context.
CRs-Fixed: 2539731
Change-Id: I27a3f34a533034a4748674ce8b9212163b231b24
At the time of starting / stopping 2nd or 3rd connection,
Host sends WMI_PDEV_SET_HW_CMDID command to FW to change
HW mode to DBS / Single-Mac based on concurrency rule.
FW upon receiving this command turns off TXRX chainmask
which means that radar pulses might get missed for
20ms - 50ms during CAC period. To fix this, Host should
block new connection when existing SAP is performing CAC
on DFS channel.
Change-Id: I51eb117afa763a6ef54211808875419026c9075b
CRs-Fixed: 2533717
In the current implementation, NAN enable and disable request are
processed asynchronously, because of which some race conditions
are seen.
Example: If NDI is having multiple NDPs and without terminating
NDPs if NAN disable and NDI delete are issued back to back then,
NDP_END sequence is not initiated and causing deviation from
NAN spec. Root-cause is firmware deleting NDP peer as a part of
NDI delete before initiating NDP end sequence.
To fix this, process NAN enable and disable requests synchronously.
Change-Id: I467419370187b0dc8d879e1806347c9f21ebb23a
CRs-Fixed: 2528599
Fill the pfm info of the TDLS peer before sending the peer assoc
command to FW.
Change-Id: I4e336c345c0fb8f063157b3e3a780efa777f1a74
CRs-Fixed: 2535832
Currently logs for wifi_pos module are not enabled,
because of which it is difficult to debug the issues.
Enable the wifi_pos logs to address above issue.
Change-Id: I777076d5cd0251b7c714bf22fd885e0cabda6ea2
CRs-Fixed: 2547557
Disable 3 port in DBS 1x1 and No-DBS PCL tables
as DBS 1x1+1x1 or NON DBS solutions does not
support 3 port as of now.
Change-Id: I16d9d0b6f09ad599e94c776821e68f1e0fcc362e
CRs-Fixed: 2551510
After STA channel switch, when SAP try to force scc with STA,
race condition issue happens sometimes between mc thread and sap
restart thread, hdd_ctx->roaming_in_progress isn't cleared when
check roaming status in hdd_softap_set_channel_change, so channel
switch failed.
Fix: change order, make sure hdd_set_roaming_in_progress(false)
happens before policy_mgr_check_concurrent_intf_and_restart_sap.
Change-Id: I1146eb665941fe0beb8f6165272f32ac8f7e74f2
CRs-Fixed: 2549571
In lim, gpLimMlmAuthReq is freed in lim_restore_auth_state if
auth failure timeout happens. gpLimMlmAuthReq is dereferenced in
lim_process_auth_retry_timer. When there is a race where
lim_restore_auth_state is called before lim_process_auth_retry_timer,
then null pointer dereference of gpLimMlmAuthReq happens in
lim_process_auth_retry_timer.
Validate gpLimMlmAuthReq against null before accessing it.
Change-Id: Ic1af10172aa98785c84165c4491c8bdc1b3e508f
CRs-Fixed: 2550793
