The order of the panel timing nodes specified in the device tree is
not guaranteed to be the same while being parsed in the driver. This
results in unintended modes being set as preferred timing mode. The change
introduces cell-index property, so that the timing modes can be
accurately indexed and parsed.
Change-Id: I8ccd4d5a15643bfe72bc8be084f5e91fac26feb4
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Change adds support for enabling splitlink sublinks video data swap.
Change-Id: I731b85a5e8fe8638005433819957dd0658f72963
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Currently, RFI feature only supports panel that contains
a single timing node. This limits the feature availability
for panel with multiple modes or with DFPS support.
This change adds support for RFI on panels that contains
multiple timing nodes.
Change-Id: I3a7aadf7b6da3518350b2eb815602b13b5c259f5
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Fix dlkm compilation errors that are due to the use of -Werror
flags used by the build system.
Change-Id: I5e1e9bc63c1361d73e4930aab123212717872ecb
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Currently, a different dsi_display_mode is created for
each combination of RFI frequency, but only one of
those modes is reported to the user. Hence,
it is not necessary to create multiple RFI modes anymore.
This change removes code to inflate the list of modes
by the number of RFI frequencies, removes pclk from
the mode name as it will change dynamically.
Change-Id: I0714de5e53f46d9f142da1f4562f65793de38e54
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Change removes the use of custom MSM DSI flags that will not be
available as part of GKI.2.0
Change-Id: I2337a54b1d6346ebdc18e9e6c3c8e7a07f421bdd
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Update panel commands to support panel operating mode switch in
one timing node.
Change-Id: Ieb8303cebe78c699dfd5f274830418e87655ff56
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Expose panel mode from kernel to SDM with SDE connector property
CONNECTOR_PROP_MODE_INFO and set panel mode from SDM to kernel
with SDE connector property CONNECTOR_PROP_SET_PANEL_MODE for
avoiding private change in upstream code in QGKI kernel.
Change-Id: I0629dad9399967cc1118ac02ce30597076ca367d
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
This change replaces kzfree with kfree as kzfree has been
renamed.
While moving to the latest 5.10 tip, additional small changes
were required to resolve compilation issues:
set_dma_ops has moved from dma-mapping to dma-map-ops header.
This change includes the new header file required.
drm_panel_add returns void, this change removes the expected
return value check.
drm_prime_pages_to_sg takes an additional parameter. This change
passes in the drm_device pointer the function is looking for.
Remove an unused variable in sde_crtc vblank function.
Change-Id: I47c085c0cb64432873c2e750ae64cbdc2b5340da
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Commit 6dbe0c4b0fc0 ("drm/panel: Initialise panel dev and funcs
through drm_panel_init()") and commit ba2fad4c9648 ("drm/panel:
Add and fill drm_panel type field") modify input parameters for
drm_panel_init. This change updates the relevant changes to the
dsi driver by passing in the device and panel type.
Change-Id: I76a271fea08190bd8633831442ca48882f8a97e6
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Add support to trigger ESD through debugfs by directly
modifying the reset GPIOs TLMM register in trusted-vm as GPIO
driver support is not enabled.
Change-Id: I859affe69c13dbe115a48b0a63a600a57027db58
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Parse all the GPIO pins used by the DSI host and the display panel
along with its register ranges and store it in panel struct. This
avoids parsing the device-tree everytime during transitions between
trusted and primary vm.
Change-Id: Ibbb646358c0409703afda1c4f758f044fc8c0001
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
The change batches DSI commands sent using the debugfs node, in a
separate buffer from the TX command buffer to ensure that they are not
triggered before the last command bit is set. Once the last command
bit is set the buffer is then copied to the DSI TX buffer and triggered.
Change-Id: I9ba624e4e19341696a974994817603315c6c8a45
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
In current implementation qsync min fps is single value.
It is same for all the list of supported dfps list.
Added support for new dt entry dsi-supported-qsync-min-fps-list
corresponding to the fps supported in the dfps list
dsi-supported-dfps-list.
Change-Id: Ifd5309c2f51865a3c0d9fadb65cbcd291b6ef42b
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
This change adds support to keep display reset pin high during
suspend state.
Change-Id: I8fab43d8f7b30fce72cc95277d016b72b914aa99
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add parsing code for getting the TLMM base address and size
of each GPIO pin register space along with the GPIO pins
used for the specific panel. This list is used to lend
these IO ranges to trusted vm during the trusted UI usecase.
Change-Id: I10429cfa14265d52e898815c6cf94be27daa5677
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
DCS brightness settng can only use HS mode. Add a new
DT property for LP mode choose for DCS brightness setting.
Change-Id: Ibe5867fe344776871eb3a410a8d79d347775f3d4
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
The change allows for configuring a command DMA window during which
the command is triggered. The DMA window must not intersect with the
MDP tear check window. Once the command transfer is successful, the
trigger control needs to reset to the default DMA trigger specified
by the panel.
Change-Id: I5485ca1f8e141ed92dc8c77c2daf579634271022
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
The default PWM gpio pin mode was not right for PWM backlight
control. If needs to use PWM backlight, must config the
gpio pinctrl.
Change-Id: I5fd6b947d379b53ef4c358be1b935a2ad4970f99
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
This change ensure that in cases panel transfer time is specified,
the final transfer time is calculated in accordance with the minimum
threshold time allowed.
Change-Id: I3442d4d3e8a27ec30d93725cb96b229bb94f2ce2
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Display in trusted VM works in a handover mode i.e, all
display components need to be initialized by the primary VM
before switching to trusted VM on the usecase boundary.
That makes it a hard requirement for the trusted VM not to
re-program any of the display configuration registers before
it could hand the HW back to the primary VM.
Also, most of the linux framework drivers including pintrl, clocks
are not enabled in the trusted VM.
In order to address the above two limitations and to control the
probe/commit sequences, this change adapts the same path as that
of continuous splash to bypass some of the critical functions
which are identified to be HW intrusive. Based on the DT property
read from SDE handle, dsi drivers will choose to bypass
enable/disable HW state updates when executing in the vm environment.
Change-Id: Ica71c924d189ab65fe3be5b0ac870633e3b749e1
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Primary and secondary dsi displays are built-in displays
and they are supported during all concurrency usecases
without resource allocation failure. DP mode filter
logic should provide supported mode information based
on free mdp resources after dsi resource assignment.
Change-Id: I3a9637a91ea1ffcc31997e25caff7f13605283ac
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Use lower frame threshold time for high refresh rates. For resfreh rates
greater than 120 FPS the threshold time is 500us.
Change-Id: Ie5a37c0eec6c2c2cbf90e039eb6b15bc7edd2492
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Since some property of panel dtsi were not a must.
Do not report errors for panel bindings that are
not mandatory.
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Change-Id: Ie899081e2ca93740ceb854457b61e5fc5d2083fa
Add support to read cphy boolean flag from panel dtsi
and configure DSI PHY registers accordingly. Update the
bit/byte clock calculation according to cphy specifications.
Update clock parents so that the relevant divider blocks
are configured to support cphy.
Change-Id: Iaca61eec01a488657b086f59910c52f8c79e26a4
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
In order to make dsi panel and dsi2hdmi panel compatible,
delete "qcom,panel-force-clock-lane-hs" property in phy and
use display panel's force_clk_lane_hs property.
Change-Id: I490e08b2ee859797c2b3aeddf109a3a4286fb922
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
In general the brightness value, the first parameter is low byte and
the second is high byte, but some DDIC invert, so add inverted display
brightness value property.
Change-Id: I8bf5631bb66096bd28529c53643e358afffce18e
Signed-off-by: Wenjun Zhang <wjzhan@codeaurora.org>
Add vote for panel regulators in dsi probe to make sure
panel regulators are ON until dsi bind is completed
for cont-splash enabled usecase. Remove this panel regulator
vote when dsi component bind is done.
Change-Id: I0b1d43fa1b16385712abc1d8aaa0e778f31ba634
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Update the VDC-m hardware version in the display driver as per
the latest programming guidelines.
Change-Id: I0073cb7b713599de43f2a675202390df3b4a1d58
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
This change updates the parsing of timing nodes to check
the mode of operation as video or command. In command mode,
for each timing node, num of supported dfps rate is always
one. Accordingly, update the num_dfps_rate to 1 for
command mode.
Change-Id: I5098c7e0d4d2320609d6e10031eaef78c1d8b3c1
Signed-off-by: Lipsa Rout <lrout@codeaurora.org>
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Optimize pre mode switch panel command by transferring async. This
removes the time waited until subsequent dma_done irq.
Change-Id: I2e2516fdd641e85d1f1b221a6ea7999c868edf00
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
From Lahaina onwards, for compressed DSI output, widebus should be enabled.
In widebus mode, 6 bytes of data are transmitted per pclk.
For uncompressed output, widebus must be disabled to transmit 3 bytes
of uncompressed data per pclk.
Change-Id: I7fc0bdb2e1678152d57b4cbb8295063a2ba8ae73
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
