monitor reset functionality when bkpressure is seen.
debug logs added to inspect monitor ring in case of bp.
Change-Id: I8e79f97b315653f302da087ea8d82362ba02723d
CRs-Fixed: 3542923
Fix compilation issues when below macro are undefined
a) WLAN_PKT_CAPTURE_TX_2_0
b) WLAN_TX_PKT_CAPTURE_ENH_BE
c) BE_PKTLOG_SUPPORT
d) DP_RX_MOM_MEM_FRAG.
CRs-Fixed: 3571652
Change-Id: I066ace0b51fd628d31b2d7161765bf9d0c405549
Recently, Word compaction is by default enabled as part
of all monitor mode realated features. Due to which, while
parsing the pktlog data, multiple TLV parsing errors are seen.
Hence, with this change word compaction is disabled if pktlog
is enabled.
Change-Id: I35153f74da2de5978b225ced7f8c1112f3aff3b2
CRs-Fixed: 3551975
Lite monitor deallocation should happen before mon rings deinit.
Call lite monitor dealloc function before mon rings deinit
Change-Id: I9b93945ccc092ff524555e8a4aa9cd2e3877f70f
CRs-Fixed: 3578630
For LPC mode, host only need to configure the filter for
monitor status ring, filter for STA RXDMA_BUF has been
configured during dp_soc init, do not touch filter of
RXDMA_BUF for LPC mode.
Change-Id: Ia64b0f608ce7c31517ef7174293bc52e6d4ab9b7
CRs-Fixed: 3531963
dp_htt_process_smu_ppdu_stats_tlv API is defined inside
QCA_ENHANCED_STATS_SUPPORT along with WLAN_FEATURE_PKT_CAPTURE_V2
protection but API is called with WLAN_FEATURE_PKT_CAPTURE_V2.
There is a compilation error
a. if WLAN_FEATURE_PKT_CAPTURE_V2 is defined and if
QCA_ENHANCED_STATS_SUPPORT is not set.
b. if REMOVE_PKT_LOG and WLAN_FEATURE_PKT_CAPTURE_V2 is set.
This change is to move dp_htt_process_smu_ppdu_stats_tlv
out of QCA_ENHANCED_STATS_SUPPORT and add WLAN_FEATURE_PKT_CAPTURE_V2
protection to avoid compilation errors.
Change-Id: I50093ede0530afa34f501210e5a53fa88e61d863
CRs-Fixed: 3528736
currently in disable ol_stats path, if disable ol_stats
is triggered for any pdev, then due to MLO link stats we
disable ol_stats on all pdev's. if the pdev deinit is
already happened then we skip disabling it and dont send
h2t complete free nbuf message, creating OOM. Fix is to
remove the pdev deinit check and disable ol_stats only
for particular pdev and not pdev of MLO.
Change-Id: I6171c6f545ed823cdec211c6ac00b8e0ff93211a
CRs-Fixed: 3511913
Optimize Tx and Rx monitor stats update code by replacing
multiple if checks with switch case statements
Change-Id: I07dd7784dccdfe0cf0e1ade822746d0c6f55cd95
CRs-Fixed: 3511037
Currently NSS is required for packet capture mode to derive tx rate
and firmware sends NSS part of ppdu stats in new ppdu stats tlv
HTT_PPDU_STATS_FOR_SMU_TLV.
Add code to parse ppdu stats if feature is enabled via ini and
send the ppdu stats using wdi event to packet capture
component.
Change-Id: I5567007a91093dd342f37458760b3a61c040b778
CRs-Fixed: 3462436
Logs without meaningful message or values serves no purpose in debugging.
Hence, add more context to the logs.
Change-Id: Ia463d239a9bf26f292a11bcc71cb1379374c45e4
CRs-Fixed: 3492593
Separate out the common function implementing both RX 2.0 and TX 2.0
functionality in to RX 2.0 and TX 2.0 separate functions.
Change-Id: I29337aca9851dce1888a492a9534992277f595b5
CRs-Fixed: 3427301
Currently WIN supports RX/TX 2.0 but MCC needs to support RX 1.0 and
TX 2.0. Hence implement the mon_ops callbacks as array of callback
pointers. Index 0 for 1.0 and Index 1 for 2.0.
Change-Id: I777b47be3af86f0b762b3563ef56204809a9a7ee
CRs-Fixed: 3427297
Currently QCA_MONITOR_2_0_SUPPORT macro is used for both TX and RX 2.0.
but on MCC side, only RX 1.0 is supported and as part of this feature
TX 2.0 need to be supported.
Enabling QCA_MONITOR_2_0_SUPPORT will enable both RX 2.0 and TX 2.0, but
to support RX 1.0 and TX 2.0, we need to separate out code under
QCA_MONITOR_2_0_SUPPORT to TX and RX 2.0 macro.
As part of this change, introduce separate macros for TX 2.0 and RX 2.0
and move the common code under both macros.
Change-Id: I7ef7e488800934291538a0bca9acd21e28901214
CRs-Fixed: 3415740
The airtime stats last_update_time is getting updated within the loop
causing higher AC values to go out of sync.
Update airtime stats last_update_time after the loop
Change-Id: Icdb33335284e0a92b90c72099c18b6bc7690275c
CRs-Fixed: 3476253
Monitor ops functions are different for version 1 and 2.
Move mon mac filter func ptr to mon ops structure so that
its initialized properly according to monitor version.
Change-Id: Ie07ae3b7d3e9923e463db503aaa8b3500c1e1eac
CRs-Fixed: 3456620
FW sends ppdu_id for every TLV in Tx HTT PPDU completion path.
This ppdu_id has 8 MSB bits filled with FW metadata which is different
for every TLV. Host uses this ppdu_id for list maintenance.
Presence of the FW metadata results in ppdu_id mismatch for different
TLVs even when they belong to the same PPDU.
Consider only LSB 24 bits for ppdu_id on host side.
Change-Id: Ic6ec780fe97f0597fcd841b33ac0dce33ad986c9
CRs-Fixed: 3445603
Move cfr monitor filter cdp func ptr to cdp mon ops structure.
cfr monitor filter cdp function is different for 1.0 and 2.0
hence moving the func ptr to mon ops structure ensures that
func ptr is initialized appropriately.
Change-Id: I82b9c85e96f2f219521ae6ed908ade120081c748
CRs-Fixed: 3428791
This code helps to initialize and deinitialize new SOFTUMAC
based Rhine architecture.
Change-Id: I374140ccb3b31e9351c6e683c77d81a5a876472a
CRs-Fixed: 3382913
Move smart monitor cdp func ptrs to cdp mon ops structure.
Smart monitor cdp functions are different for 1.0 and 2.0
hence moving the func ptrs to mon ops structure ensures that
func ptrs are initialized appropriately.
Change-Id: Ic827b44f36d76349f397e5b72dec0a127f90aa7a
CRs-Fixed: 3428778
1) Enable MLO Link Stats Support
2) Add Stats counter to capture Invalid Link ID
3) Fix the FW Recovery crash while ol_stats
disable.
Change-Id: I1b5263ae024579c5ec2018f8082f0d03ffdf0030
CRs-Fixed: 3431319
Add support to enable/disable MLO Link Peer stats through
ini and cfg80211tool enable_ol stats command
Change-Id: Id1229a149befa416d060e1b07eee150e6b295abf
CRs-Fixed: 3397721
Add 160 MHz and 320 MHz BW support for Smart Antenna.
Peer connect gets rate codes for all supported BW on connecting peer
as part of wmi_peer_ratecode_list_event. This changes add 320 MHz and
160 MHz BW support.
Change-Id: I715dd5a64c38114fef6e17c2e2f6a526e1a716c2
CRs-Fixed: 3381648
Add TLV recording support for Rx monitor. The TLV
tag and its data are recorded in a fixed size buffer
Change-Id: Idad896d1ece25a499ab76028c8a231fcd9947f66
CRs-Fixed: 3402543
Adding check for num users and num ul users to not cross max users limit
And convert target uplink trigger tid to data tids
CRs-Fixed: 3396991
Change-Id: I66180dba0889e116ce8ff4e582fd9c1d8391f27b
The pointer to next TLV in status buffer is considered
as valid, only if atleast the TLV header size is available
within the status buffer.
Change-Id: Ic222bfab4790853ee012de4b0a860ab037972ff5
CRs-Fixed: 3378058
Parse sequence type and msduq htt tlv and
update mode count and avg rate based on txmode.
CRs-Fixed: 3380939
Change-Id: I5fe2068cbe8b312738eeaa4c4a48000e1a66255c
